Attachment 108975 Details for Bug 85924 – dmesg

dmesg

dmesg.txt (text/plain), 97.28 KB, created by oliver.grafe on 2014-11-05 17:23:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: oliver.grafe

Created: 2014-11-05 17:23:41 UTC

Size: 97.28 KB

patch

obsolete

>linux-bc55:/etc # dmesg
>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.18.0-rc3-3.ge706e91-default (geeko@buildhost) (gcc version 4.8.3 20140627 [gcc-4_8-branch revision 212064] (SUSE Linux) ) #1 SMP Tue Nov 4 12:43:57 UTC 2014 (e706e91)
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.18.0-rc3-3.ge706e91-default root=UUID=202a20be-c008-4a75-8474-4ec796ecec50 splash=silent quiet showopts drm.debug=6
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a66b5fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a66b6000-0x00000000a66bcfff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000a66bd000-0x00000000a6f75fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000a6f76000-0x00000000a735bfff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000a735c000-0x00000000b7509fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000b750a000-0x00000000b7720fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000b7721000-0x00000000b7760fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000b7761000-0x00000000b780dfff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000b780e000-0x00000000b7ffefff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000b7fff000-0x00000000b7ffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000bc000000-0x00000000be1fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fdfffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.7 present.
>[    0.000000] DMI: Supermicro X10SAE/X10SAE, BIOS 1.00 05/03/2013
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] e820: last_pfn = 0x23fe00 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-CFFFF write-protect
>[    0.000000]   D0000-E7FFF uncachable
>[    0.000000]   E8000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
>[    0.000000]   1 base 0200000000 mask 7FC0000000 write-back
>[    0.000000]   2 base 00C0000000 mask 7FC0000000 uncachable
>[    0.000000]   3 base 00BC000000 mask 7FFC000000 uncachable
>[    0.000000]   4 base 023FE00000 mask 7FFFE00000 uncachable
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] e820: update [mem 0xbc000000-0xffffffff] usable ==> reserved
>[    0.000000] e820: last_pfn = 0xb8000 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000fd7f0-0x000fd7ff] mapped at [ffff8800000fd7f0]
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
>[    0.000000] BRK [0x02206000, 0x02206fff] PGTABLE
>[    0.000000] BRK [0x02207000, 0x02207fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x23fc00000-0x23fdfffff]
>[    0.000000]  [mem 0x23fc00000-0x23fdfffff] page 2M
>[    0.000000] BRK [0x02208000, 0x02208fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x23c000000-0x23fbfffff]
>[    0.000000]  [mem 0x23c000000-0x23fbfffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
>[    0.000000]  [mem 0x200000000-0x23bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xa66b5fff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
>[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
>[    0.000000]  [mem 0x80000000-0xa65fffff] page 2M
>[    0.000000]  [mem 0xa6600000-0xa66b5fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xa66bd000-0xa6f75fff]
>[    0.000000]  [mem 0xa66bd000-0xa67fffff] page 4k
>[    0.000000]  [mem 0xa6800000-0xa6dfffff] page 2M
>[    0.000000]  [mem 0xa6e00000-0xa6f75fff] page 4k
>[    0.000000] BRK [0x02209000, 0x02209fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xa735c000-0xb7509fff]
>[    0.000000]  [mem 0xa735c000-0xa73fffff] page 4k
>[    0.000000]  [mem 0xa7400000-0xb73fffff] page 2M
>[    0.000000]  [mem 0xb7400000-0xb7509fff] page 4k
>[    0.000000] BRK [0x0220a000, 0x0220afff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0xb7721000-0xb7760fff]
>[    0.000000]  [mem 0xb7721000-0xb7760fff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xb7fff000-0xb7ffffff]
>[    0.000000]  [mem 0xb7fff000-0xb7ffffff] page 4k
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
>[    0.000000]  [mem 0x100000000-0x1ffffffff] page 1G
>[    0.000000] RAMDISK: [mem 0x36f70000-0x377affff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
>[    0.000000] ACPI: XSDT 0x00000000B77E9098 0000AC (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 0x00000000B77F40B8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: DSDT 0x00000000B77E91D8 00AEDD (v02 ALASKA A M I    00000000 INTL 20091112)
>[    0.000000] ACPI: FACS 0x00000000B780C080 000040
>[    0.000000] ACPI: APIC 0x00000000B77F41C8 000092 (v03 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: FPDT 0x00000000B77F4260 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
>[    0.000000] ACPI: SSDT 0x00000000B77F42A8 000540 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
>[    0.000000] ACPI: SSDT 0x00000000B77F47E8 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20051117)
>[    0.000000] ACPI: SSDT 0x00000000B77F52C0 0002F2 (v01 PmRef  Cpu0Tst  00003000 INTL 20051117)
>[    0.000000] ACPI: SSDT 0x00000000B77F55B8 000348 (v01 PmRef  ApTst    00003000 INTL 20051117)
>[    0.000000] ACPI: MCFG 0x00000000B77F5900 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
>[    0.000000] ACPI: HPET 0x00000000B77F5940 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
>[    0.000000] ACPI: SSDT 0x00000000B77F5978 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
>[    0.000000] ACPI: SSDT 0x00000000B77F5CE8 00327D (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
>[    0.000000] ACPI: ASF! 0x00000000B77F8F68 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
>[    0.000000] ACPI: DMAR 0x00000000B77F9010 0000B8 (v01 INTEL  HSW      00000001 INTL 00000001)
>[    0.000000] ACPI: EINJ 0x00000000B77F90C8 000130 (v01 AMI    AMI EINJ 00000000      00000000)
>[    0.000000] ACPI: ERST 0x00000000B77F91F8 000230 (v01 AMIER  AMI ERST 00000000      00000000)
>[    0.000000] ACPI: HEST 0x00000000B77F9428 0000A8 (v01 AMI    AMI HEST 00000000      00000000)
>[    0.000000] ACPI: BERT 0x00000000B77F94D0 000030 (v01 AMI    AMI BERT 00000000      00000000)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fdfffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x23fde7000-0x23fdfafff]
>[    0.000000]  [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237600000-ffff88023e5fffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x23fdfffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
>[    0.000000]   node   0: [mem 0x00100000-0xa66b5fff]
>[    0.000000]   node   0: [mem 0xa66bd000-0xa6f75fff]
>[    0.000000]   node   0: [mem 0xa735c000-0xb7509fff]
>[    0.000000]   node   0: [mem 0xb7721000-0xb7760fff]
>[    0.000000]   node   0: [mem 0xb7fff000-0xb7ffffff]
>[    0.000000]   node   0: [mem 0x100000000-0x23fdfffff]
>[    0.000000] Initmem setup node 0 [mem 0x00001000-0x23fdfffff]
>[    0.000000] On node 0 totalpages: 2060026
>[    0.000000]   DMA zone: 56 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 10197 pages used for memmap
>[    0.000000]   DMA32 zone: 745822 pages, LIFO batch:31
>[    0.000000]   Normal zone: 17913 pages used for memmap
>[    0.000000]   Normal zone: 1310208 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xbc200000-0xbe1fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa66b6000-0xa66bcfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xa6f76000-0xa735bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xb750a000-0xb7720fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xb7761000-0xb780dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xb780e000-0xb7ffefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xb8000000-0xbbffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbc000000-0xbe1fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbe200000-0xf7ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
>[    0.000000] e820: [mem 0xbe200000-0xf7ffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff88023fa00000 s83392 r8192 d31296 u262144
>[    0.000000] pcpu-alloc: s83392 r8192 d31296 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2031839
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.0-rc3-3.ge706e91-default root=UUID=202a20be-c008-4a75-8474-4ec796ecec50 splash=silent quiet showopts drm.debug=6
>[    0.000000] log_buf_len individual max cpu contribution: 32768 bytes
>[    0.000000] log_buf_len total cpu_extra contributions: 229376 bytes
>[    0.000000] log_buf_len min size: 262144 bytes
>[    0.000000] log_buf_len: 524288 bytes
>[    0.000000] early log buf free: 248432(94%)
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
>[    0.000000] AGP: Checking aperture...
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] Memory: 8030532K/8240104K available (6211K kernel code, 996K rwdata, 4728K rodata, 1540K init, 1540K bss, 209572K reserved)
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
>[    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:33024 nr_irqs:488 0
>[    0.000000]  Offload RCU callbacks from all CPUs
>[    0.000000]  Offload RCU callbacks from CPUs: 0-7.
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] allocated 33030144 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2300.002 MHz processor
>[    0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 4600.00 BogoMIPS (lpj=9200008)
>[    0.000027] pid_max: default: 32768 minimum: 301
>[    0.000032] ACPI: Core revision 20140926
>[    0.012492] ACPI: All ACPI Tables successfully acquired
>[    0.013935] Security Framework initialized
>[    0.013946] AppArmor: AppArmor initialized
>[    0.014386] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.015642] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.016182] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.016189] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.016379] Initializing cgroup subsys memory
>[    0.016384] Initializing cgroup subsys devices
>[    0.016387] Initializing cgroup subsys freezer
>[    0.016389] Initializing cgroup subsys net_cls
>[    0.016390] Initializing cgroup subsys blkio
>[    0.016392] Initializing cgroup subsys perf_event
>[    0.016394] Initializing cgroup subsys net_prio
>[    0.016396] Initializing cgroup subsys hugetlb
>[    0.016415] CPU: Physical Processor ID: 0
>[    0.016416] CPU: Processor Core ID: 0
>[    0.016419] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.017247] mce: CPU supports 9 MCE banks
>[    0.017259] CPU0: Thermal monitoring enabled (TM1)
>[    0.017270] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
>Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
>[    0.017354] Freeing SMP alternatives memory: 24K (ffffffff8207c000 - ffffffff82082000)
>[    0.018067] ftrace: allocating 24118 entries in 95 pages
>[    0.025803] dmar: Host address width 39
>[    0.025805] dmar: DRHD base: 0x000000fed90000 flags: 0x0
>[    0.025810] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
>[    0.025811] dmar: DRHD base: 0x000000fed91000 flags: 0x1
>[    0.025814] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
>[    0.025815] dmar: RMRR base: 0x000000b76a1000 end: 0x000000b76adfff
>[    0.025816] dmar: RMRR base: 0x000000bc000000 end: 0x000000be1fffff
>[    0.025881] IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
>[    0.025882] HPET id 0 under DRHD base 0xfed91000
>[    0.025882] Queued invalidation will be enabled to support x2apic and Intr-remapping.
>[    0.026014] Enabled IRQ remapping in x2apic mode
>[    0.026015] Enabling x2apic
>[    0.026016] Enabled x2apic
>[    0.026020] Switched APIC routing to cluster x2apic.
>[    0.026432] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.066096] smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1268L v3 @ 2.30GHz (fam: 06, model: 3c, stepping: 03)
>[    0.066102] TSC deadline timer enabled
>[    0.066119] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
>[    0.066135] ... version:                3
>[    0.066136] ... bit width:              48
>[    0.066136] ... generic registers:      4
>[    0.066137] ... value mask:             0000ffffffffffff
>[    0.066138] ... max period:             0000ffffffffffff
>[    0.066138] ... fixed-purpose events:   3
>[    0.066139] ... event mask:             000000070000000f
>[    0.067290] x86: Booting SMP configuration:
>[    0.067291] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
>[    0.165025] x86: Booted up 1 node, 8 CPUs
>[    0.165028] smpboot: Total of 8 processors activated (36800.03 BogoMIPS)
>[    0.174550] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.174737] devtmpfs: initialized
>[    0.176915] PM: Registering ACPI NVS region [mem 0xa66b6000-0xa66bcfff] (28672 bytes)
>[    0.176916] PM: Registering ACPI NVS region [mem 0xb7761000-0xb780dfff] (708608 bytes)
>[    0.177630] pinctrl core: initialized pinctrl subsystem
>[    0.177664] RTC time:  0:57:57, date: 11/06/14
>[    0.177763] NET: Registered protocol family 16
>[    0.178513] cpuidle: using governor ladder
>[    0.182517] cpuidle: using governor menu
>[    0.182569] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.182570] ACPI: bus type PCI registered
>[    0.182572] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.182642] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.182644] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.182716] PCI: Using configuration type 1 for base access
>[    0.186932] ACPI: Added _OSI(Module Device)
>[    0.186934] ACPI: Added _OSI(Processor Device)
>[    0.186935] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.186936] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.190110] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.193062] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.193369] \_SB_:_OSC invalid UUID
>[    0.193371] _OSC request data:1 1f
>[    0.194679] ACPI: Dynamic OEM Table Load:
>[    0.194685] ACPI: SSDT 0xFFFF88023486F800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
>[    0.198877] ACPI: Dynamic OEM Table Load:
>[    0.198883] ACPI: SSDT 0xFFFF8802344E6800 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
>[    0.202643] ACPI: Dynamic OEM Table Load:
>[    0.202647] ACPI: SSDT 0xFFFF88023486B800 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
>[    0.208143] ACPI: Interpreter enabled
>[    0.208153] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
>[    0.208157] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140926/hwxface-580)
>[    0.208166] ACPI: (supports S0 S1 S4 S5)
>[    0.208167] ACPI: Using IOAPIC for interrupt routing
>[    0.208215] HEST: Table parsing has been initialized.
>[    0.208217] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.216926] ACPI: Power Resource [FN00] (off)
>[    0.217000] ACPI: Power Resource [FN01] (off)
>[    0.217071] ACPI: Power Resource [FN02] (off)
>[    0.217141] ACPI: Power Resource [FN03] (off)
>[    0.217211] ACPI: Power Resource [FN04] (off)
>[    0.217969] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.217974] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.218220] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
>[    0.218379] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
>[    0.219055] PCI host bridge to bus 0000:00
>[    0.219058] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.219059] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.219061] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.219062] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.219063] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
>[    0.219064] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
>[    0.219065] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
>[    0.219066] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
>[    0.219068] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
>[    0.219069] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
>[    0.219070] pci_bus 0000:00: root bus resource [mem 0xbe200000-0xfeafffff]
>[    0.219076] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000
>[    0.219159] pci 0000:00:02.0: [8086:041a] type 00 class 0x030000
>[    0.219168] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
>[    0.219173] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.219177] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
>[    0.219254] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
>[    0.219260] pci 0000:00:03.0: reg 0x10: [mem 0xf0834000-0xf0837fff 64bit]
>[    0.219360] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
>[    0.219378] pci 0000:00:14.0: reg 0x10: [mem 0xf0820000-0xf082ffff 64bit]
>[    0.219436] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.219477] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.219512] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
>[    0.219530] pci 0000:00:16.0: reg 0x10: [mem 0xf0840000-0xf084000f 64bit]
>[    0.219590] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.219661] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
>[    0.219676] pci 0000:00:16.3: reg 0x10: [io  0xf0e0-0xf0e7]
>[    0.219684] pci 0000:00:16.3: reg 0x14: [mem 0xf083e000-0xf083efff]
>[    0.219811] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
>[    0.219827] pci 0000:00:19.0: reg 0x10: [mem 0xf0800000-0xf081ffff]
>[    0.219834] pci 0000:00:19.0: reg 0x14: [mem 0xf083d000-0xf083dfff]
>[    0.219842] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
>[    0.219899] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.219941] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.219977] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
>[    0.219996] pci 0000:00:1a.0: reg 0x10: [mem 0xf083c000-0xf083c3ff]
>[    0.220080] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.220139] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    0.220175] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
>[    0.220189] pci 0000:00:1b.0: reg 0x10: [mem 0xf0830000-0xf0833fff 64bit]
>[    0.220255] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.220299] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    0.220332] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
>[    0.220404] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.220448] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.220482] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
>[    0.220553] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.220598] pci 0000:00:1c.3: System wakeup disabled by ACPI
>[    0.220630] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
>[    0.220695] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>[    0.220739] pci 0000:00:1c.5: System wakeup disabled by ACPI
>[    0.220770] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
>[    0.220834] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
>[    0.220877] pci 0000:00:1c.6: System wakeup disabled by ACPI
>[    0.220908] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
>[    0.220973] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
>[    0.221017] pci 0000:00:1c.7: System wakeup disabled by ACPI
>[    0.221052] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
>[    0.221071] pci 0000:00:1d.0: reg 0x10: [mem 0xf083b000-0xf083b3ff]
>[    0.221156] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.221212] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.221247] pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100
>[    0.221407] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
>[    0.221421] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
>[    0.221428] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
>[    0.221435] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
>[    0.221442] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
>[    0.221449] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
>[    0.221456] pci 0000:00:1f.2: reg 0x24: [mem 0xf083a000-0xf083a7ff]
>[    0.221493] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.221559] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
>[    0.221572] pci 0000:00:1f.3: reg 0x10: [mem 0xf0839000-0xf08390ff 64bit]
>[    0.221591] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
>[    0.221673] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
>[    0.221690] pci 0000:00:1f.6: reg 0x10: [mem 0xf0838000-0xf0838fff 64bit]
>[    0.221874] acpiphp: Slot [1] registered
>[    0.221880] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.221990] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
>[    0.222018] pci 0000:02:00.0: reg 0x10: [mem 0xf0700000-0xf077ffff]
>[    0.222051] pci 0000:02:00.0: reg 0x18: [io  0xe000-0xe01f]
>[    0.222068] pci 0000:02:00.0: reg 0x1c: [mem 0xf0780000-0xf0783fff]
>[    0.222244] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    0.222286] pci 0000:02:00.0: System wakeup disabled by ACPI
>[    0.348488] pci 0000:00:1c.3: PCI bridge to [bus 02]
>[    0.348491] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
>[    0.348494] pci 0000:00:1c.3:   bridge window [mem 0xf0700000-0xf07fffff]
>[    0.348606] pci 0000:03:00.0: [10e3:8113] type 01 class 0x060401
>[    0.348738] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.348765] pci 0000:03:00.0: System wakeup disabled by ACPI
>[    0.348793] pci 0000:00:1c.5: PCI bridge to [bus 03-04]
>[    0.348798] pci 0000:00:1c.5:   bridge window [mem 0xf0600000-0xf06fffff]
>[    0.348921] pci 0000:04:03.0: [104c:8023] type 00 class 0x0c0010
>[    0.348953] pci 0000:04:03.0: reg 0x10: [mem 0xf0604000-0xf06047ff]
>[    0.348971] pci 0000:04:03.0: reg 0x14: [mem 0xf0600000-0xf0603fff]
>[    0.349113] pci 0000:04:03.0: supports D1 D2
>[    0.349114] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
>[    0.349223] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
>[    0.349233] pci 0000:03:00.0:   bridge window [mem 0xf0600000-0xf06fffff]
>[    0.349240] pci 0000:03:00.0:   bridge window [mem 0xf0600000-0xf06fffff] (subtractive decode)
>[    0.349395] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
>[    0.349438] pci 0000:05:00.0: reg 0x10: [mem 0xf0500000-0xf0501fff 64bit]
>[    0.349689] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
>[    0.349733] pci 0000:05:00.0: System wakeup disabled by ACPI
>[    0.356552] pci 0000:00:1c.6: PCI bridge to [bus 05]
>[    0.356557] pci 0000:00:1c.6:   bridge window [mem 0xf0500000-0xf05fffff]
>[    0.356647] pci 0000:06:00.0: [1b21:0612] type 00 class 0x010601
>[    0.356667] pci 0000:06:00.0: reg 0x10: [io  0xd050-0xd057]
>[    0.356678] pci 0000:06:00.0: reg 0x14: [io  0xd040-0xd043]
>[    0.356689] pci 0000:06:00.0: reg 0x18: [io  0xd030-0xd037]
>[    0.356701] pci 0000:06:00.0: reg 0x1c: [io  0xd020-0xd023]
>[    0.356712] pci 0000:06:00.0: reg 0x20: [io  0xd000-0xd01f]
>[    0.356724] pci 0000:06:00.0: reg 0x24: [mem 0xf0400000-0xf04001ff]
>[    0.356818] pci 0000:06:00.0: System wakeup disabled by ACPI
>[    0.364495] pci 0000:00:1c.7: PCI bridge to [bus 06]
>[    0.364499] pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
>[    0.364502] pci 0000:00:1c.7:   bridge window [mem 0xf0400000-0xf04fffff]
>[    0.364597] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
>[    0.365574] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.365639] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    0.365700] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
>[    0.365771] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    0.365823] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
>[    0.365877] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.365930] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.365982] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.366310] ACPI: Enabled 4 GPEs in block 00 to 3F
>[    0.366372] vgaarb: setting as boot device: PCI:0000:00:02.0
>[    0.366373] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.366376] vgaarb: loaded
>[    0.366377] vgaarb: bridge control possible 0000:00:02.0
>[    0.366437] SCSI subsystem initialized
>[    0.366468] libata version 3.00 loaded.
>[    0.366530] PCI: Using ACPI for IRQ routing
>[    0.367774] PCI: pci_cache_line_size set to 64 bytes
>[    0.367836] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
>[    0.367838] e820: reserve RAM buffer [mem 0xa66b6000-0xa7ffffff]
>[    0.367839] e820: reserve RAM buffer [mem 0xa6f76000-0xa7ffffff]
>[    0.367840] e820: reserve RAM buffer [mem 0xb750a000-0xb7ffffff]
>[    0.367841] e820: reserve RAM buffer [mem 0xb7761000-0xb7ffffff]
>[    0.367842] e820: reserve RAM buffer [mem 0x23fe00000-0x23fffffff]
>[    0.367933] NetLabel: Initializing
>[    0.367934] NetLabel:  domain hash size = 128
>[    0.367934] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.367944] NetLabel:  unlabeled traffic allowed by default
>[    0.367967] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.367971] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.371004] Switched to clocksource hpet
>[    0.375288] AppArmor: AppArmor Filesystem Enabled
>[    0.375312] pnp: PnP ACPI init
>[    0.375380] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
>[    0.375382] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.375542] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.375544] system 00:01: [io  0xffff] has been reserved
>[    0.375545] system 00:01: [io  0xffff] has been reserved
>[    0.375546] system 00:01: [io  0xffff] has been reserved
>[    0.375548] system 00:01: [io  0x1c00-0x1cfe] has been reserved
>[    0.375549] system 00:01: [io  0x1d00-0x1dfe] has been reserved
>[    0.375550] system 00:01: [io  0x1e00-0x1efe] has been reserved
>[    0.375551] system 00:01: [io  0x1f00-0x1ffe] has been reserved
>[    0.375553] system 00:01: [io  0x0ca4-0x0ca7] has been reserved
>[    0.375554] system 00:01: [io  0x1800-0x18fe] could not be reserved
>[    0.375555] system 00:01: [io  0x164e-0x164f] has been reserved
>[    0.375557] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.375583] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.375627] system 00:03: [io  0x1854-0x1857] has been reserved
>[    0.375629] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.375737] system 00:04: [io  0x0a00-0x0a1f] has been reserved
>[    0.375738] system 00:04: [io  0x0a30-0x0a3f] has been reserved
>[    0.375740] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.375966] pnp 00:05: [dma 0 disabled]
>[    0.376002] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.376195] pnp 00:06: [dma 0 disabled]
>[    0.376228] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.376273] system 00:07: [io  0x04d0-0x04d1] has been reserved
>[    0.376275] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.376701] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.376703] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.376704] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.376705] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.376707] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.376708] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.376710] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
>[    0.376711] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.376712] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
>[    0.376714] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    0.376715] system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved
>[    0.376716] system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
>[    0.376718] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.376992] pnp: PnP ACPI: found 9 devices
>[    0.383110] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
>[    0.383113] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
>[    0.383114] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
>[    0.383150] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
>[    0.383151] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.383152] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.383156] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbe200000-0xbe3fffff]
>[    0.383161] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbe400000-0xbe5fffff 64bit pref]
>[    0.383163] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
>[    0.383165] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.383167] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>[    0.383171] pci 0000:00:1c.0:   bridge window [mem 0xbe200000-0xbe3fffff]
>[    0.383175] pci 0000:00:1c.0:   bridge window [mem 0xbe400000-0xbe5fffff 64bit pref]
>[    0.383180] pci 0000:00:1c.3: PCI bridge to [bus 02]
>[    0.383182] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
>[    0.383187] pci 0000:00:1c.3:   bridge window [mem 0xf0700000-0xf07fffff]
>[    0.383194] pci 0000:03:00.0: PCI bridge to [bus 04]
>[    0.383201] pci 0000:03:00.0:   bridge window [mem 0xf0600000-0xf06fffff]
>[    0.383211] pci 0000:00:1c.5: PCI bridge to [bus 03-04]
>[    0.383216] pci 0000:00:1c.5:   bridge window [mem 0xf0600000-0xf06fffff]
>[    0.383222] pci 0000:00:1c.6: PCI bridge to [bus 05]
>[    0.383227] pci 0000:00:1c.6:   bridge window [mem 0xf0500000-0xf05fffff]
>[    0.383233] pci 0000:00:1c.7: PCI bridge to [bus 06]
>[    0.383235] pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
>[    0.383239] pci 0000:00:1c.7:   bridge window [mem 0xf0400000-0xf04fffff]
>[    0.383247] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.383248] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.383249] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.383250] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
>[    0.383251] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
>[    0.383252] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
>[    0.383253] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
>[    0.383254] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
>[    0.383255] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
>[    0.383256] pci_bus 0000:00: resource 13 [mem 0xbe200000-0xfeafffff]
>[    0.383258] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
>[    0.383259] pci_bus 0000:01: resource 1 [mem 0xbe200000-0xbe3fffff]
>[    0.383260] pci_bus 0000:01: resource 2 [mem 0xbe400000-0xbe5fffff 64bit pref]
>[    0.383261] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
>[    0.383262] pci_bus 0000:02: resource 1 [mem 0xf0700000-0xf07fffff]
>[    0.383263] pci_bus 0000:03: resource 1 [mem 0xf0600000-0xf06fffff]
>[    0.383264] pci_bus 0000:04: resource 1 [mem 0xf0600000-0xf06fffff]
>[    0.383265] pci_bus 0000:04: resource 4 [mem 0xf0600000-0xf06fffff]
>[    0.383267] pci_bus 0000:05: resource 1 [mem 0xf0500000-0xf05fffff]
>[    0.383268] pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
>[    0.383269] pci_bus 0000:06: resource 1 [mem 0xf0400000-0xf04fffff]
>[    0.383328] NET: Registered protocol family 2
>[    0.383464] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.383572] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.383684] TCP: Hash tables configured (established 65536 bind 65536)
>[    0.383695] TCP: reno registered
>[    0.383703] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.383725] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.383785] NET: Registered protocol family 1
>[    0.383797] pci 0000:00:02.0: Video device with shadowed ROM
>[    0.423235] PCI: CLS 64 bytes, default 64
>[    0.423278] Unpacking initramfs...
>[    1.142657] Freeing initrd memory: 8448K (ffff880036f70000 - ffff8800377b0000)
>[    1.142681] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    1.142683] software IO TLB [mem 0xb350a000-0xb750a000] (64MB) mapped at [ffff8800b350a000-ffff8800b7509fff]
>[    1.142942] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
>[    1.142991] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x7
>[    1.142998] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x7
>[    1.143007] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x7
>[    1.143014] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x7
>[    1.143020] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x7
>[    1.143024] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x7
>[    1.143030] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x7
>[    1.143036] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x7
>[    1.143073] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    1.143093] Scanning for low memory corruption every 60 seconds
>[    1.143348] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    1.143369] Initialise system trusted keyring
>[    1.143401] audit: initializing netlink subsys (disabled)
>[    1.143413] audit: type=2000 audit(1415235477.016:1): initialized
>[    1.143644] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    1.143669] zpool: loaded
>[    1.143671] zbud: loaded
>[    1.143805] VFS: Disk quotas dquot_6.5.2
>[    1.143825] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.144039] msgmni has been set to 15701
>[    1.144083] Key type big_key registered
>[    1.144382] Key type asymmetric registered
>[    1.144384] Asymmetric key parser 'x509' registered
>[    1.144409] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    1.144454] io scheduler noop registered
>[    1.144457] io scheduler deadline registered
>[    1.144473] io scheduler cfq registered (default)
>[    1.145033] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.145047] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    1.145082] vesafb: mode is 640x480x32, linelength=2560, pages=0
>[    1.145083] vesafb: scrolling: redraw
>[    1.145084] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    1.145095] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004e80000, using 1216k, total 1216k
>[    1.168362] Console: switching to colour frame buffer device 80x30
>[    1.191475] fb0: VESA VGA frame buffer device
>[    1.191486] intel_idle: MWAIT substates: 0x42120
>[    1.191487] intel_idle: v0.4 model 0x3C
>[    1.191488] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    1.191783] ERST: Error Record Serialization Table (ERST) support is initialized.
>[    1.191787] pstore: Registered erst as persistent store backend
>[    1.191899] \_SB_:_OSC request failed
>[    1.191900] _OSC request data:1 1 0
>[    1.191903] \_SB_:_OSC invalid UUID
>[    1.191903] _OSC request data:1 1 0
>[    1.191905] GHES: APEI firmware first mode is enabled by APEI bit.
>[    1.191941] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
>[    1.212304] serial 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    1.232683] serial 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
>[    1.253908] serial 0000:00:16.3: ttyS4 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A
>[    1.254101] Non-volatile memory driver v1.3
>[    1.254104] Linux agpgart interface v0.103
>[    1.254210] ahci 0000:00:1f.2: version 3.0
>[    1.254298] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
>[    1.254345] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
>[    1.254347] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
>[    1.291149] scsi host0: ahci
>[    1.291276] scsi host1: ahci
>[    1.291375] scsi host2: ahci
>[    1.291469] scsi host3: ahci
>[    1.291562] scsi host4: ahci
>[    1.291654] scsi host5: ahci
>[    1.291696] ata1: SATA max UDMA/133 abar m2048@0xf083a000 port 0xf083a100 irq 26
>[    1.291699] ata2: SATA max UDMA/133 abar m2048@0xf083a000 port 0xf083a180 irq 26
>[    1.291701] ata3: SATA max UDMA/133 abar m2048@0xf083a000 port 0xf083a200 irq 26
>[    1.291704] ata4: SATA max UDMA/133 abar m2048@0xf083a000 port 0xf083a280 irq 26
>[    1.291706] ata5: SATA max UDMA/133 abar m2048@0xf083a000 port 0xf083a300 irq 26
>[    1.291708] ata6: SATA max UDMA/133 abar m2048@0xf083a000 port 0xf083a380 irq 26
>[    1.291815] ahci 0000:06:00.0: irq 27 for MSI/MSI-X
>[    1.291833] ahci 0000:06:00.0: SSS flag set, parallel bus scan disabled
>[    1.291872] ahci 0000:06:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
>[    1.291875] ahci 0000:06:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
>[    1.292185] scsi host6: ahci
>[    1.292291] scsi host7: ahci
>[    1.292347] ata7: SATA max UDMA/133 abar m512@0xf0400000 port 0xf0400100 irq 27
>[    1.292350] ata8: SATA max UDMA/133 abar m512@0xf0400000 port 0xf0400180 irq 27
>[    1.292397] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    1.295077] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.295081] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.295169] mousedev: PS/2 mouse device common for all mice
>[    1.295241] rtc_cmos 00:02: RTC can wake from S4
>[    1.295355] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    1.295380] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.295389] Intel P-state driver initializing.
>[    1.295582] ledtrig-cpu: registered to indicate activity on CPUs
>[    1.295625] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.295772] TCP: cubic registered
>[    1.295955] NET: Registered protocol family 10
>[    1.297383] Loading compiled-in X.509 certificates
>[    1.297415] registered taskstats version 1
>[    1.297509] AppArmor: AppArmor sha1 policy hashing enabled
>[    1.299395]   Magic number: 6:918:960
>[    1.299501] memory memory11: hash matches
>[    1.299593] rtc_cmos 00:02: setting system clock to 2014-11-06 00:57:58 UTC (1415235478)
>[    1.299814] PM: Hibernation image not present or could not be loaded.
>[    1.610507] ata7: SATA link down (SStatus 0 SControl 300)
>[    1.610509] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.610527] ata5: SATA link down (SStatus 0 SControl 300)
>[    1.610552] ata4: SATA link down (SStatus 0 SControl 300)
>[    1.610572] ata3: SATA link down (SStatus 0 SControl 300)
>[    1.610593] ata6: SATA link down (SStatus 0 SControl 300)
>[    1.610610] ata2: SATA link down (SStatus 0 SControl 300)
>[    1.615913] ata1.00: ATA-7: SAMSUNG HD080HJ/P, ZH100-34, max UDMA7
>[    1.615916] ata1.00: 156250000 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.621457] ata1.00: configured for UDMA/133
>[    1.621558] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD080HJ/ 0-34 PQ: 0 ANSI: 5
>[    1.621702] sd 0:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
>[    1.621714] sd 0:0:0:0: [sda] Write Protect is off
>[    1.621716] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.621722] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.627935]  sda: sda1
>[    1.628116] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.938358] ata8: SATA link down (SStatus 0 SControl 300)
>[    1.939242] Freeing unused kernel memory: 1540K (ffffffff81efb000 - ffffffff8207c000)
>[    1.939244] Write protecting the kernel read-only data: 14336k
>[    1.942648] Freeing unused kernel memory: 1972K (ffff880001613000 - ffff880001800000)
>[    1.944804] Freeing unused kernel memory: 1416K (ffff880001c9e000 - ffff880001e00000)
>[    1.946414] random: systemd urandom read with 4 bits of entropy available
>[    1.989692] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    2.131454] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
>[    2.131670] ACPI: Power Button [PWRB]
>[    2.131780] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    2.131827] ACPI: Power Button [PWRF]
>[    2.142166] tsc: Refined TSC clocksource calibration: 2299.997 MHz
>[    2.156638] [drm] Initialized drm 1.1.0 20060810
>[    2.157181] ACPI: bus type USB registered
>[    2.157365] usbcore: registered new interface driver usbfs
>[    2.157514] usbcore: registered new interface driver hub
>[    2.157556] usbcore: registered new device driver usb
>[    2.158223] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    2.158408] ehci-pci: EHCI PCI platform driver
>[    2.158554] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    2.158562] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    2.158577] ehci-pci 0000:00:1a.0: debug port 2
>[    2.162488] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    2.162497] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf083c000
>[    2.174134] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    2.174269] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.174272] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.174273] usb usb1: Product: EHCI Host Controller
>[    2.174275] usb usb1: Manufacturer: Linux 3.18.0-rc3-3.ge706e91-default ehci_hcd
>[    2.174276] usb usb1: SerialNumber: 0000:00:1a.0
>[    2.174449] hub 1-0:1.0: USB hub found
>[    2.174464] hub 1-0:1.0: 3 ports detected
>[    2.174786] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    2.174791] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    2.174803] ehci-pci 0000:00:1d.0: debug port 2
>[    2.178709] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    2.178731] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf083b000
>[    2.194116] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    2.194282] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.194284] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.194286] usb usb2: Product: EHCI Host Controller
>[    2.194287] usb usb2: Manufacturer: Linux 3.18.0-rc3-3.ge706e91-default ehci_hcd
>[    2.194289] usb usb2: SerialNumber: 0000:00:1d.0
>[    2.194442] hub 2-0:1.0: USB hub found
>[    2.194470] hub 2-0:1.0: 3 ports detected
>[    2.195202] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x041a rev=0x06 flags=need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    2.195213] [drm:intel_detect_pch] Found LynxPoint PCH
>[    2.195251] [drm] Memory usable by graphics device = 2048M
>[    2.195253] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    2.195254] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    2.195255] [drm:i915_gem_gtt_init] ppgtt mode: 1
>[    2.195255] [drm] Replacing VGA console driver
>[    2.195258] checking generic (e0000000 130000) vs hw (e0000000 10000000)
>[    2.195259] fb: switching to inteldrmfb from VESA VGA
>[    2.195277] Console: switching to colour dummy device 80x25
>[    2.195877] [drm:intel_opregion_setup] graphic opregion physical addr: 0xb77fa018
>[    2.195883] [drm:intel_opregion_setup] Public ACPI methods supported
>[    2.195884] [drm:intel_opregion_setup] SWSCI supported
>[    2.210217] firewire_ohci 0000:04:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
>[    2.218146] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    2.218148] [drm:intel_opregion_setup] ASLE supported
>[    2.218226] i915 0000:00:02.0: irq 28 for MSI/MSI-X
>[    2.218236] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    2.218237] [drm] Driver supports precise vblank timestamp query.
>[    2.218238] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    2.218240] [drm:validate_vbt] Using VBT from OpRegion: $VBT HASWELL        d
>[    2.218242] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    2.218243] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    2.218245] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    2.218247] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    2.218250] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    2.218251] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[    2.218253] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    2.218254] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    2.218256] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    2.218257] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    2.218259] [drm:parse_driver_features] DRRS State Enabled:1
>[    2.218261] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    2.218262] [drm:parse_ddi_port] VBT HDMI level shift for port B: 6
>[    2.218263] [drm:parse_ddi_port] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    2.218264] [drm:parse_ddi_port] VBT HDMI level shift for port C: 6
>[    2.218266] [drm:parse_ddi_port] Port D VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    2.218267] [drm:parse_ddi_port] VBT HDMI level shift for port D: 6
>[    2.218275] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    2.218281] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at bc200000
>[    2.218284] [drm:intel_display_power_get] enabling always-on
>[    2.218285] [drm:intel_display_power_get] enabling display
>[    2.218288] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    2.218329] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    2.218330] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec)
>[    2.218331] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec)
>[    2.218332] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec)
>[    2.218333] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    2.218334] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    2.218335] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec)
>[    2.218336] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec)
>[    2.218337] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec)
>[    2.218338] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    2.218339] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    2.218340] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec)
>[    2.218341] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec)
>[    2.218342] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec)
>[    2.218343] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    2.218345] [drm:intel_modeset_init] 3 display pipes available.
>[    2.218357] [drm:intel_ddi_pll_init] CDCLK running at 540000KHz
>[    2.218708] [drm:intel_crt_reset] pch crt adpa set to 0x80f40000
>[    2.218714] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    2.218741] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    2.218840] [drm:intel_dp_init_connector] Adding DP connector on port D
>[    2.218864] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-DP-2
>[    2.219120] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: enabled
>[    2.219122] [drm:intel_modeset_readout_hw_state] [CRTC:12] hw state readout: disabled
>[    2.219123] [drm:intel_modeset_readout_hw_state] [CRTC:16] hw state readout: disabled
>[    2.219125] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: refcount 0, on 0
>[    2.219126] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: refcount 0, on 0
>[    2.219130] [drm:intel_modeset_readout_hw_state] [ENCODER:19:DAC-19] hw state readout: enabled, pipe A
>[    2.219132] [drm:intel_modeset_readout_hw_state] [ENCODER:20:TMDS-20] hw state readout: disabled, pipe A
>[    2.219133] [drm:intel_modeset_readout_hw_state] [ENCODER:22:DP MST-22] hw state readout: disabled, pipe A
>[    2.219134] [drm:intel_modeset_readout_hw_state] [ENCODER:23:DP MST-23] hw state readout: disabled, pipe B
>[    2.219135] [drm:intel_modeset_readout_hw_state] [ENCODER:24:DP MST-24] hw state readout: disabled, pipe C
>[    2.219136] [drm:intel_modeset_readout_hw_state] [ENCODER:29:TMDS-29] hw state readout: disabled, pipe A
>[    2.219138] [drm:intel_modeset_readout_hw_state] [ENCODER:31:TMDS-31] hw state readout: disabled, pipe A
>[    2.219139] [drm:intel_modeset_readout_hw_state] [ENCODER:33:DP MST-33] hw state readout: disabled, pipe A
>[    2.219140] [drm:intel_modeset_readout_hw_state] [ENCODER:34:DP MST-34] hw state readout: disabled, pipe B
>[    2.219141] [drm:intel_modeset_readout_hw_state] [ENCODER:35:DP MST-35] hw state readout: disabled, pipe C
>[    2.219142] [drm:intel_modeset_readout_hw_state] [CONNECTOR:18:VGA-1] hw state readout: enabled
>[    2.219144] [drm:intel_modeset_readout_hw_state] [CONNECTOR:21:DP-1] hw state readout: disabled
>[    2.219145] [drm:intel_modeset_readout_hw_state] [CONNECTOR:27:HDMI-A-1] hw state readout: disabled
>[    2.219147] [drm:intel_modeset_readout_hw_state] [CONNECTOR:30:HDMI-A-2] hw state readout: disabled
>[    2.219148] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:DP-2] hw state readout: disabled
>[    2.219149] [drm:intel_modeset_readout_hw_state] [CONNECTOR:36:HDMI-A-3] hw state readout: disabled
>[    2.219152] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A
>[    2.219153] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    2.219154] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    2.219156] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2346946, gmch_n: 8388608, link_m: 48894, link_n: 524288, tu: 64
>[    2.219157] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.219158] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    2.219159] [drm:intel_dump_pipe_config] requested mode:
>[    2.219161] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 640 0 0 0 480 0 0 0 0x0 0x0
>[    2.219162] [drm:intel_dump_pipe_config] adjusted mode:
>[    2.219163] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    2.219165] [drm:intel_dump_crtc_timings] crtc timings: 25179 640 656 752 800 480 490 492 525, type: 0x0 flags: 0xa
>[    2.219166] [drm:intel_dump_pipe_config] port clock: 270000
>[    2.219167] [drm:intel_dump_pipe_config] pipe src size: 640x480
>[    2.219168] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.219170] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x028001e0, enabled
>[    2.219170] [drm:intel_dump_pipe_config] ips: 0
>[    2.219171] [drm:intel_dump_pipe_config] double wide: 0
>[    2.219173] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    2.219176] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    2.219177] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[    2.219179] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
>[    2.219180] [drm:intel_dump_pipe_config] [CRTC:12][setup_hw_state] config for pipe B
>[    2.219181] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    2.219182] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    2.219183] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.219184] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.219186] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    2.219186] [drm:intel_dump_pipe_config] requested mode:
>[    2.219188] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.219189] [drm:intel_dump_pipe_config] adjusted mode:
>[    2.219190] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.219192] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.219193] [drm:intel_dump_pipe_config] port clock: 0
>[    2.219194] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    2.219195] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.219196] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.219197] [drm:intel_dump_pipe_config] ips: 0
>[    2.219197] [drm:intel_dump_pipe_config] double wide: 0
>[    2.219199] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[    2.219201] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[    2.219202] [drm:i915_get_vblank_timestamp] crtc 2 is disabled
>[    2.219204] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe C
>[    2.219205] [drm:intel_dump_pipe_config] [CRTC:16][setup_hw_state] config for pipe C
>[    2.219206] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    2.219207] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    2.219208] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.219209] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.219210] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    2.219211] [drm:intel_dump_pipe_config] requested mode:
>[    2.219213] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.219213] [drm:intel_dump_pipe_config] adjusted mode:
>[    2.219215] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.219216] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.219217] [drm:intel_dump_pipe_config] port clock: 0
>[    2.219218] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    2.219219] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.219220] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.219221] [drm:intel_dump_pipe_config] ips: 0
>[    2.219222] [drm:intel_dump_pipe_config] double wide: 0
>[    2.219226] [drm:intel_connector_check_state] [CONNECTOR:18:VGA-1]
>[    2.219229] [drm:check_encoder_state] [ENCODER:19:DAC-19]
>[    2.219231] [drm:check_encoder_state] [ENCODER:20:TMDS-20]
>[    2.219232] [drm:check_encoder_state] [ENCODER:22:DP MST-22]
>[    2.219233] [drm:check_encoder_state] [ENCODER:23:DP MST-23]
>[    2.219234] [drm:check_encoder_state] [ENCODER:24:DP MST-24]
>[    2.219235] [drm:check_encoder_state] [ENCODER:29:TMDS-29]
>[    2.219236] [drm:check_encoder_state] [ENCODER:31:TMDS-31]
>[    2.219237] [drm:check_encoder_state] [ENCODER:33:DP MST-33]
>[    2.219238] [drm:check_encoder_state] [ENCODER:34:DP MST-34]
>[    2.219239] [drm:check_encoder_state] [ENCODER:35:DP MST-35]
>[    2.219240] [drm:check_crtc_state] [CRTC:8]
>[    2.219249] [drm:check_crtc_state] [CRTC:12]
>[    2.219250] [drm:check_crtc_state] [CRTC:16]
>[    2.219252] [drm:check_shared_dpll_state] WRPLL 1
>[    2.219253] [drm:check_shared_dpll_state] WRPLL 2
>[    2.219257] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=640x480@32, offset=0, pitch 2560, size 0x12c000
>[    2.219258] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=12c000
>[    2.219261] [drm:i915_pages_create_for_stolen] offset=0x0, size=1228800
>[    2.219263] [drm:intel_alloc_plane_obj] plane fb obj ffff880232973e40
>[    2.219266] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 12c000
>[    2.219267] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [12c000, 7ffff000]
>[    2.220981] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
>[    2.221061] [drm:i915_gem_context_init] HW context support initialized
>[    2.221068] [drm:init_status_page] render ring hws offset: 0x0013d000
>[    2.230160] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0015e000
>[    2.230168] [drm:init_status_page] bsd ring hws offset: 0x0015f000
>[    2.230226] [drm:init_status_page] blitter ring hws offset: 0x00180000
>[    2.230276] [drm:init_status_page] video enhancement ring hws offset: 0x001a1000
>[    2.230473] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:VGA-1]
>[    2.230476] [drm:intel_crt_detect] [CONNECTOR:18:VGA-1] force=1
>[    2.230481] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0x80f40000
>[    2.243861] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.244067] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
>[    2.244207] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
>[    2.246135] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0x80f40000, result 0
>[    2.246138] [drm:intel_crt_detect] CRT not detected via hotplug
>[    2.246348] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    2.246351] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    2.246352] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.246354] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    2.246730] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    2.246731] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    2.246732] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    2.246735] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:VGA-1] disconnected
>[    2.246737] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:DP-1]
>[    2.246739] [drm:intel_dp_detect] [CONNECTOR:21:DP-1]
>[    2.246742] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:DP-1] disconnected
>[    2.246743] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:HDMI-A-1]
>[    2.246744] [drm:intel_hdmi_detect] [CONNECTOR:27:HDMI-A-1]
>[    2.246934] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[    2.246936] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    2.246937] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:HDMI-A-1] disconnected
>[    2.246938] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2]
>[    2.246939] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-2]
>[    2.247146] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    2.247150] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.247153] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] disconnected
>[    2.247155] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:DP-2]
>[    2.247157] [drm:intel_dp_detect] [CONNECTOR:32:DP-2]
>[    2.247161] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:DP-2] disconnected
>[    2.247162] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-3]
>[    2.247163] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-3]
>[    2.247413] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[    2.247417] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[    2.247421] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-3] disconnected
>[    2.247424] i915 0000:00:02.0: No connectors reported connected with modes
>[    2.247425] [drm:drm_setup_crtcs]
>[    2.247428] [drm:drm_enable_connectors] connector 18 enabled? no
>[    2.247429] [drm:drm_enable_connectors] connector 21 enabled? no
>[    2.247430] [drm:drm_enable_connectors] connector 27 enabled? no
>[    2.247431] [drm:drm_enable_connectors] connector 30 enabled? no
>[    2.247432] [drm:drm_enable_connectors] connector 32 enabled? no
>[    2.247433] [drm:drm_enable_connectors] connector 36 enabled? no
>[    2.247434] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[    2.247435] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    2.247436] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    2.247437] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    2.247438] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    2.247439] [drm:intel_fb_initial_config] connector HDMI-A-3 not enabled, skipping
>[    2.247440] [drm:intel_fb_initial_config] Not using firmware configuration
>[    2.247442] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
>[    2.247444] [drm] Cannot find any crtc or sizes - going 1024x768
>[    2.247445] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    2.247446] [drm:i915_gem_object_create_stolen] creating stolen object: size=300000
>[    2.247452] [drm:i915_pages_create_for_stolen] offset=0x12c000, size=3145728
>[    2.247730] [drm:intelfb_create] allocated 1024x768 fb: 0x001c3000, bo ffff880037108e40
>[    2.247885] fbcon: inteldrmfb (fb0) is primary device
>[    2.247902] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[    2.247905] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=0
>[    2.247906] [drm:intel_modeset_stage_output_state] [CONNECTOR:18:VGA-1] to [NOCRTC]
>[    2.247906] [drm:intel_modeset_stage_output_state] encoder changed, full mode switch
>[    2.247907] [drm:intel_modeset_stage_output_state] crtc changed, full mode switch
>[    2.247908] [drm:intel_modeset_stage_output_state] crtc disabled, full mode switch
>[    2.247910] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[    2.282167] [drm:hsw_crt_post_disable] Disabling SPLL
>[    2.282171] [drm:intel_update_fbc] no output, disabling
>[    2.282177] [drm:intel_display_power_put] disabling display
>[    2.282179] [drm:hsw_set_power_well] Requesting to disable the power well
>[    2.282180] [drm:intel_display_power_put] disabling always-on
>[    2.282185] [drm:check_encoder_state] [ENCODER:19:DAC-19]
>[    2.282186] [drm:check_encoder_state] [ENCODER:20:TMDS-20]
>[    2.282187] [drm:check_encoder_state] [ENCODER:22:DP MST-22]
>[    2.282187] [drm:check_encoder_state] [ENCODER:23:DP MST-23]
>[    2.282188] [drm:check_encoder_state] [ENCODER:24:DP MST-24]
>[    2.282188] [drm:check_encoder_state] [ENCODER:29:TMDS-29]
>[    2.282189] [drm:check_encoder_state] [ENCODER:31:TMDS-31]
>[    2.282190] [drm:check_encoder_state] [ENCODER:33:DP MST-33]
>[    2.282190] [drm:check_encoder_state] [ENCODER:34:DP MST-34]
>[    2.282191] [drm:check_encoder_state] [ENCODER:35:DP MST-35]
>[    2.282192] [drm:check_crtc_state] [CRTC:8]
>[    2.282193] [drm:check_crtc_state] [CRTC:12]
>[    2.282193] [drm:check_crtc_state] [CRTC:16]
>[    2.282194] [drm:check_shared_dpll_state] WRPLL 1
>[    2.282195] [drm:check_shared_dpll_state] WRPLL 2
>[    2.282205] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[    2.282208] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[    2.282209] [drm:intel_crtc_set_config] [CRTC:16] [NOFB]
>[    2.282211] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0
>[    2.282232] Console: switching to colour frame buffer device 128x48
>[    2.283829] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.283830] i915 0000:00:02.0: registered panic notifier
>[    2.410013] raid6: sse2x1   10508 MB/s
>[    2.477984] raid6: sse2x2   13168 MB/s
>[    2.486015] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    2.506003] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    2.545937] raid6: sse2x4   15228 MB/s
>[    2.613915] raid6: avx2x1   20261 MB/s
>[    2.618339] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
>[    2.618341] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.618653] hub 1-1:1.0: USB hub found
>[    2.618720] hub 1-1:1.0: 6 ports detected
>[    2.638324] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
>[    2.638326] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.638613] hub 2-1:1.0: USB hub found
>[    2.638708] hub 2-1:1.0: 8 ports detected
>[    2.681881] raid6: avx2x2   22956 MB/s
>[    2.710026] firewire_core 0000:04:03.0: created device fw0: GUID 00304800001094bb, S400
>[    2.749836] raid6: avx2x4   26354 MB/s
>[    2.749848] raid6: using algorithm avx2x4 (26354 MB/s)
>[    2.749849] raid6: using avx2x2 recovery algorithm
>[    2.750071] xor: automatically using best checksumming function:
>[    2.789819]    avx       : 26954.000 MB/sec
>[    2.792487] Btrfs loaded, assert=on
>[    2.792823] BTRFS: device fsid 202a20be-c008-4a75-8474-4ec796ecec50 devid 1 transid 1899 /dev/sda1
>[    2.820645] BTRFS info (device sda1): disk space caching is enabled
>[    3.141728] Switched to clocksource tsc
>[    3.917473] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    3.917481] [drm:gen6_enable_rps] Overclocking supported. Max: 1000MHz, Overclock max: 1000MHz
>[    5.200863] device-mapper: uevent: version 1.0.3
>[    5.200916] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
>[    6.289693] BTRFS info (device sda1): disk space caching is enabled
>[    7.596732] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>[    7.602848] mei_me 0000:00:16.0: irq 29 for MSI/MSI-X
>[    7.612187] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    7.612193] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    7.612274] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    7.612290] xhci_hcd 0000:00:14.0: irq 30 for MSI/MSI-X
>[    7.612373] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    7.612375] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    7.612376] usb usb3: Product: xHCI Host Controller
>[    7.612378] usb usb3: Manufacturer: Linux 3.18.0-rc3-3.ge706e91-default xhci-hcd
>[    7.612379] usb usb3: SerialNumber: 0000:00:14.0
>[    7.612474] hub 3-0:1.0: USB hub found
>[    7.612495] hub 3-0:1.0: 15 ports detected
>[    7.615247] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    7.615250] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
>[    7.615301] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    7.615302] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    7.615303] usb usb4: Product: xHCI Host Controller
>[    7.615304] usb usb4: Manufacturer: Linux 3.18.0-rc3-3.ge706e91-default xhci-hcd
>[    7.615305] usb usb4: SerialNumber: 0000:00:14.0
>[    7.615391] hub 4-0:1.0: USB hub found
>[    7.615404] hub 4-0:1.0: 6 ports detected
>[    7.616752] xhci_hcd 0000:05:00.0: xHCI Host Controller
>[    7.616758] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
>[    7.622063] xhci_hcd 0000:05:00.0: irq 31 for MSI/MSI-X
>[    7.622064] pps_core: LinuxPPS API ver. 1 registered
>[    7.622065] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    7.622074] xhci_hcd 0000:05:00.0: irq 32 for MSI/MSI-X
>[    7.622081] xhci_hcd 0000:05:00.0: irq 33 for MSI/MSI-X
>[    7.622086] xhci_hcd 0000:05:00.0: irq 34 for MSI/MSI-X
>[    7.622091] xhci_hcd 0000:05:00.0: irq 35 for MSI/MSI-X
>[    7.622095] xhci_hcd 0000:05:00.0: irq 36 for MSI/MSI-X
>[    7.622099] xhci_hcd 0000:05:00.0: irq 37 for MSI/MSI-X
>[    7.622102] xhci_hcd 0000:05:00.0: irq 38 for MSI/MSI-X
>[    7.622252] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>[    7.622254] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    7.622256] usb usb5: Product: xHCI Host Controller
>[    7.622257] usb usb5: Manufacturer: Linux 3.18.0-rc3-3.ge706e91-default xhci-hcd
>[    7.622259] usb usb5: SerialNumber: 0000:05:00.0
>[    7.622350] hub 5-0:1.0: USB hub found
>[    7.622360] hub 5-0:1.0: 2 ports detected
>[    7.622442] xhci_hcd 0000:05:00.0: xHCI Host Controller
>[    7.622444] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 6
>[    7.625517] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
>[    7.625518] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    7.625519] usb usb6: Product: xHCI Host Controller
>[    7.625520] usb usb6: Manufacturer: Linux 3.18.0-rc3-3.ge706e91-default xhci-hcd
>[    7.625521] usb usb6: SerialNumber: 0000:05:00.0
>[    7.625601] hub 6-0:1.0: USB hub found
>[    7.625611] hub 6-0:1.0: 2 ports detected
>[    7.625712] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    7.641666] ACPI Error: [\PETE] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359)
>[    7.641670] ACPI Error: Method parse/execution failed [\_PR_.CPU0._TPC] (Node ffff88023f05ef18), AE_NOT_FOUND (20140926/psparse-536)
>[    7.643982] thermal LNXTHERM:00: registered as thermal_zone0
>[    7.643985] ACPI: Thermal Zone [TZ00] (28 C)
>[    7.644347] thermal LNXTHERM:01: registered as thermal_zone1
>[    7.644350] ACPI: Thermal Zone [TZ01] (30 C)
>[    7.659162] EDAC MC: Ver: 3.0.0
>[    7.659259] PTP clock support registered
>[    7.923337] usb 3-3: new low-speed USB device number 2 using xhci_hcd
>[    8.038329] EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED)
>[    8.050297] input: PC Speaker as /devices/platform/pcspkr/input/input6
>[    8.083238] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    8.083240] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    8.083404] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    8.083422] e1000e 0000:00:19.0: irq 39 for MSI/MSI-X
>[    8.094087] dca service started, version 1.12.1
>[    8.094858] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
>[    8.094859] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    8.095345] igb 0000:02:00.0: irq 40 for MSI/MSI-X
>[    8.095351] igb 0000:02:00.0: irq 41 for MSI/MSI-X
>[    8.095355] igb 0000:02:00.0: irq 42 for MSI/MSI-X
>[    8.095360] igb 0000:02:00.0: irq 43 for MSI/MSI-X
>[    8.095365] igb 0000:02:00.0: irq 44 for MSI/MSI-X
>[    8.103689] iTCO_vendor_support: vendor-support=0
>[    8.110936] usb 3-3: New USB device found, idVendor=046a, idProduct=0001
>[    8.110938] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    8.111009] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 96 microframes
>[    8.124704] igb 0000:02:00.0: added PHC on eth0
>[    8.124707] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
>[    8.124708] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:25:90:86:4f:53
>[    8.124762] igb 0000:02:00.0: eth0: PBA No: 011000-000
>[    8.124764] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
>[    8.185120] igb 0000:02:00.0 enp2s0: renamed from eth0
>[    8.218030] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    8.218058] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
>[    8.218111] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    8.235189] usb 3-4: new low-speed USB device number 3 using xhci_hcd
>[    8.349283] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    8.349285] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:86:4f:52
>[    8.349286] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    8.349317] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 0100FF-0FF
>[    8.349966] e1000e 0000:00:19.0 eno1: renamed from eth0
>[    8.368658] usb 3-4: New USB device found, idVendor=413c, idProduct=3016
>[    8.368662] usb 3-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>[    8.368665] usb 3-4: Product: Dell Premium USB Optical Mouse
>[    8.368769] usb 3-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    8.551970] [drm:intel_display_power_get] enabling display
>[    8.551974] [drm:hsw_set_power_well] Enabling power well
>[    8.552001] snd_hda_intel 0000:00:03.0: irq 45 for MSI/MSI-X
>[    8.552072] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[    8.562053] sound hdaudioC1D0: ALC1150: SKU not ready 0x00000000
>[    8.562565] sound hdaudioC1D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
>[    8.562568] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    8.562569] sound hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[    8.562570] sound hdaudioC1D0:    mono: mono_out=0x0
>[    8.562571] sound hdaudioC1D0:    dig-out=0x11/0x1e
>[    8.562572] sound hdaudioC1D0:    inputs:
>[    8.562573] sound hdaudioC1D0:      Front Mic=0x19
>[    8.562574] sound hdaudioC1D0:      Rear Mic=0x18
>[    8.562576] sound hdaudioC1D0:      Line=0x1a
>[    8.572645] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
>[    8.572738] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
>[    8.572818] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
>[    8.573048] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input10
>[    8.573415] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
>[    8.573500] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
>[    8.573557] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
>[    8.573615] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
>[    8.573661] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
>[    8.573701] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
>[    8.573743] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
>[    9.001399] usbcore: registered new interface driver usbhid
>[    9.001401] usbhid: USB HID core driver
>[    9.002133] input: HID 046a:0001 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046A:0001.0001/input/input18
>[    9.002207] hid-generic 0003:046A:0001.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 046a:0001] on usb-0000:00:14.0-3/input0
>[    9.002310] input: Dell Premium USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:413C:3016.0002/input/input19
>[    9.002387] hid-generic 0003:413C:3016.0002: input,hidraw1: USB HID v1.11 Mouse [Dell Premium USB Optical Mouse] on usb-0000:00:14.0-4/input0
>[    9.086611] AVX2 version of gcm_enc/dec engaged.
>[    9.086614] AES CTR mode by8 optimization enabled
>[   11.851489] audit: type=1400 audit(1415235489.051:2): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=580 comm="apparmor_parser"
>[   11.858271] audit: type=1400 audit(1415235489.059:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=587 comm="apparmor_parser"
>[   11.863362] audit: type=1400 audit(1415235489.063:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=591 comm="apparmor_parser"
>[   11.868274] audit: type=1400 audit(1415235489.067:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=595 comm="apparmor_parser"
>[   11.875155] audit: type=1400 audit(1415235489.075:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=600 comm="apparmor_parser"
>[   11.875159] audit: type=1400 audit(1415235489.075:7): apparmor="STATUS" operation="profile_load" name="DEFAULT_URI" pid=600 comm="apparmor_parser"
>[   11.875161] audit: type=1400 audit(1415235489.075:8): apparmor="STATUS" operation="profile_load" name="HANDLING_UNTRUSTED_INPUT" pid=600 comm="apparmor_parser"
>[   11.875163] audit: type=1400 audit(1415235489.075:9): apparmor="STATUS" operation="profile_load" name="phpsysinfo" pid=600 comm="apparmor_parser"
>[   11.880034] audit: type=1400 audit(1415235489.079:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/anvil" pid=604 comm="apparmor_parser"
>[   11.885252] audit: type=1400 audit(1415235489.083:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/auth" pid=608 comm="apparmor_parser"
>[   13.386731] NET: Registered protocol family 17
>[   21.352247] random: nonblocking pool is initialized
>[   48.138098] No iBFT detected.
>[   48.393040] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
>[   49.021158] [drm:i915_gem_open]
>[   49.021188] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[   49.021191] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   49.021193] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[   49.021194] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[   49.021195] [drm:intel_crtc_set_config] [CRTC:16] [NOFB]
>[   49.021196] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0
>[   49.043391] [drm:i915_gem_open]
>[   49.043403] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[10]
>[   49.043639] [drm:i915_gem_open]
>[   49.043656] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[10]
>[   49.043658] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[10]
>[   49.044096] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[10]
>[   49.044102] [drm:drm_mode_addfb] [FB:37]
>[   49.044174] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[10]
>[   49.044177] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[6] ENCODERS[10]
>[   49.044221] [drm:drm_mode_getconnector] [CONNECTOR:18:?]
>[   49.044226] [drm:drm_mode_getconnector] [CONNECTOR:18:?]
>[   49.044245] [drm:drm_mode_getconnector] [CONNECTOR:21:?]
>[   49.044248] [drm:drm_mode_getconnector] [CONNECTOR:21:?]
>[   49.044263] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[   49.044266] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[   49.044282] [drm:drm_mode_getconnector] [CONNECTOR:30:?]
>[   49.044284] [drm:drm_mode_getconnector] [CONNECTOR:30:?]
>[   49.044299] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[   49.044301] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[   49.044316] [drm:drm_mode_getconnector] [CONNECTOR:36:?]
>[   49.044318] [drm:drm_mode_getconnector] [CONNECTOR:36:?]
>[   49.324325] [drm:drm_mode_addfb] [FB:37]
>[   49.324341] [drm:drm_mode_setcrtc] [CRTC:8]
>[   49.324342] [drm:intel_crtc_set_config] [CRTC:8] [NOFB]
>[   49.324346] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   49.324349] [drm:drm_mode_setcrtc] [CRTC:12]
>[   49.324350] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
>[   49.324351] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
>[   49.324353] [drm:drm_mode_setcrtc] [CRTC:16]
>[   49.324354] [drm:intel_crtc_set_config] [CRTC:16] [NOFB]
>[   49.324355] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:16], mode_changed=0, fb_changed=0
>[   50.405905] fuse init (API version 7.23)
>[   51.234991] igb 0000:02:00.0 enp2s0: igb: enp2s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
>[   51.235278] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
>[   53.693359] [drm:drm_mode_getconnector] [CONNECTOR:21:?]
>[   53.693365] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:DP-1]
>[   53.693367] [drm:intel_dp_detect] [CONNECTOR:21:DP-1]
>[   53.693371] [drm:intel_display_power_get] enabling always-on
>[   53.693375] [drm:intel_display_power_put] disabling always-on
>[   53.693377] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:DP-1] disconnected
>[   53.693384] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[   53.693386] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:DP-2]
>[   53.693388] [drm:intel_dp_detect] [CONNECTOR:32:DP-2]
>[   53.693390] [drm:intel_display_power_get] enabling always-on
>[   53.693393] [drm:intel_display_power_put] disabling always-on
>[   53.693394] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:DP-2] disconnected
>[   53.693397] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[   53.693399] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:HDMI-A-1]
>[   53.693401] [drm:intel_hdmi_detect] [CONNECTOR:27:HDMI-A-1]
>[   53.693403] [drm:intel_display_power_get] enabling always-on
>[   53.693573] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   53.693577] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   53.693579] [drm:intel_display_power_put] disabling always-on
>[   53.693581] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:HDMI-A-1] disconnected
>[   53.693588] [drm:drm_mode_getconnector] [CONNECTOR:30:?]
>[   53.693590] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2]
>[   53.693592] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-2]
>[   53.693594] [drm:intel_display_power_get] enabling always-on
>[   53.693770] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   53.693773] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   53.693775] [drm:intel_display_power_put] disabling always-on
>[   53.693777] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] disconnected
>[   53.693782] [drm:drm_mode_getconnector] [CONNECTOR:36:?]
>[   53.693784] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-3]
>[   53.693786] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-3]
>[   53.693788] [drm:intel_display_power_get] enabling always-on
>[   53.693979] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[   53.693981] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[   53.693983] [drm:intel_display_power_put] disabling always-on
>[   53.693985] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-3] disconnected
>[   53.693989] [drm:drm_mode_getconnector] [CONNECTOR:18:?]
>[   53.693991] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:VGA-1]
>[   53.693992] [drm:intel_crt_detect] [CONNECTOR:18:VGA-1] force=1
>[   53.693993] [drm:intel_display_power_get] enabling always-on
>[   53.693996] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[   53.693997] [drm:intel_crt_detect] CRT not detected via hotplug
>[   53.694155] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   53.694156] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   53.694157] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   53.694158] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   53.694540] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   53.694542] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   53.694543] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   53.694543] [drm:intel_display_power_put] disabling always-on
>[   53.694545] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:VGA-1] disconnected
>[   53.825371] [drm:drm_mode_getconnector] [CONNECTOR:21:?]
>[   53.825375] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:DP-1]
>[   53.825377] [drm:intel_dp_detect] [CONNECTOR:21:DP-1]
>[   53.825379] [drm:intel_display_power_get] enabling always-on
>[   53.825381] [drm:intel_display_power_put] disabling always-on
>[   53.825383] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:DP-1] disconnected
>[   53.825386] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[   53.825387] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:DP-2]
>[   53.825388] [drm:intel_dp_detect] [CONNECTOR:32:DP-2]
>[   53.825389] [drm:intel_display_power_get] enabling always-on
>[   53.825391] [drm:intel_display_power_put] disabling always-on
>[   53.825392] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:DP-2] disconnected
>[   53.825393] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[   53.825395] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:HDMI-A-1]
>[   53.825396] [drm:intel_hdmi_detect] [CONNECTOR:27:HDMI-A-1]
>[   53.825397] [drm:intel_display_power_get] enabling always-on
>[   53.825557] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   53.825559] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   53.825561] [drm:intel_display_power_put] disabling always-on
>[   53.825562] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:HDMI-A-1] disconnected
>[   53.825567] [drm:drm_mode_getconnector] [CONNECTOR:30:?]
>[   53.825568] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2]
>[   53.825569] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-2]
>[   53.825570] [drm:intel_display_power_get] enabling always-on
>[   53.825734] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   53.825736] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   53.825737] [drm:intel_display_power_put] disabling always-on
>[   53.825738] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] disconnected
>[   53.825739] [drm:drm_mode_getconnector] [CONNECTOR:36:?]
>[   53.825741] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-3]
>[   53.825742] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-3]
>[   53.825743] [drm:intel_display_power_get] enabling always-on
>[   53.825915] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[   53.825916] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[   53.825917] [drm:intel_display_power_put] disabling always-on
>[   53.825918] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-3] disconnected
>[   53.825921] [drm:drm_mode_getconnector] [CONNECTOR:18:?]
>[   53.825922] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:VGA-1]
>[   53.825924] [drm:intel_crt_detect] [CONNECTOR:18:VGA-1] force=1
>[   53.825925] [drm:intel_display_power_get] enabling always-on
>[   53.825927] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[   53.825928] [drm:intel_crt_detect] CRT not detected via hotplug
>[   53.826084] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   53.826085] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   53.826086] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   53.826088] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   53.826468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   53.826469] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   53.826470] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   53.826471] [drm:intel_display_power_put] disabling always-on
>[   53.826472] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:VGA-1] disconnected
>[   53.826516] [drm:drm_mode_getconnector] [CONNECTOR:21:?]
>[   53.826518] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:DP-1]
>[   53.826519] [drm:intel_dp_detect] [CONNECTOR:21:DP-1]
>[   53.826520] [drm:intel_display_power_get] enabling always-on
>[   53.826523] [drm:intel_display_power_put] disabling always-on
>[   53.826524] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:21:DP-1] disconnected
>[   53.826526] [drm:drm_mode_getconnector] [CONNECTOR:32:?]
>[   53.826527] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:DP-2]
>[   53.826528] [drm:intel_dp_detect] [CONNECTOR:32:DP-2]
>[   53.826529] [drm:intel_display_power_get] enabling always-on
>[   53.826531] [drm:intel_display_power_put] disabling always-on
>[   53.826532] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:32:DP-2] disconnected
>[   53.826533] [drm:drm_mode_getconnector] [CONNECTOR:27:?]
>[   53.826534] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:HDMI-A-1]
>[   53.826535] [drm:intel_hdmi_detect] [CONNECTOR:27:HDMI-A-1]
>[   53.826536] [drm:intel_display_power_get] enabling always-on
>[   53.826698] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   53.826699] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   53.826700] [drm:intel_display_power_put] disabling always-on
>[   53.826701] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:27:HDMI-A-1] disconnected
>[   53.826704] [drm:drm_mode_getconnector] [CONNECTOR:30:?]
>[   53.826705] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2]
>[   53.826706] [drm:intel_hdmi_detect] [CONNECTOR:30:HDMI-A-2]
>[   53.826706] [drm:intel_display_power_get] enabling always-on
>[   53.826870] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   53.826871] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   53.826871] [drm:intel_display_power_put] disabling always-on
>[   53.826873] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:HDMI-A-2] disconnected
>[   53.826875] [drm:drm_mode_getconnector] [CONNECTOR:36:?]
>[   53.826876] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-3]
>[   53.826877] [drm:intel_hdmi_detect] [CONNECTOR:36:HDMI-A-3]
>[   53.826878] [drm:intel_display_power_get] enabling always-on
>[   53.827049] [drm:gmbus_xfer] GMBUS [i915 gmbus dpd] NAK for addr: 0050 r(1)
>[   53.827050] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpd
>[   53.827051] [drm:intel_display_power_put] disabling always-on
>[   53.827053] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:36:HDMI-A-3] disconnected
>[   53.827055] [drm:drm_mode_getconnector] [CONNECTOR:18:?]
>[   53.827056] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:VGA-1]
>[   53.827057] [drm:intel_crt_detect] [CONNECTOR:18:VGA-1] force=1
>[   53.827058] [drm:intel_display_power_get] enabling always-on
>[   53.827060] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[   53.827061] [drm:intel_crt_detect] CRT not detected via hotplug
>[   53.827223] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   53.827224] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   53.827225] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   53.827226] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   53.827608] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   53.827609] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   53.827610] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   53.827611] [drm:intel_display_power_put] disabling always-on
>[   53.827612] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:18:VGA-1] disconnected
>[  163.225214] [drm:intel_hpd_irq_handler] hotplug event received, stat 0x00200000, dig 0x00101012
>[  163.225224] [drm:intel_hpd_irq_handler] digital hpd port B - long
>[  163.225228] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 0
>[  163.225280] [drm:intel_dp_hpd_pulse] got hpd irq on port B - long
>[  163.225287] [drm:intel_display_power_get] enabling always-on
>[  163.227870] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f
>[  163.230435] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f
>[  163.237912] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f
>[  163.245908] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f
>[  163.251344] [drm:intel_display_power_put] disabling always-on
>[  163.251363] [drm:i915_hotplug_work_func] running encoder hotplug functions
>[  163.251369] [drm:i915_hotplug_work_func] Connector DP-1 (pin 4) received hotplug event.
>[  163.251371] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 4) received hotplug event.
>[  163.251377] [drm:intel_dp_detect] [CONNECTOR:21:DP-1]
>[  163.251381] [drm:intel_display_power_get] enabling always-on
>[  163.253939] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f
>[  163.257385] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f
>[  163.265885] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f
>[  163.273864] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7145003f
>[  163.279303] [drm:intel_display_power_put] disabling always-on
>[  163.279312] [drm:intel_hdmi_detect] [CONNECTOR:27:HDMI-A-1]
>[  163.279316] [drm:intel_display_power_get] enabling always-on
>[  163.279595] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  163.279602] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  163.279606] [drm:intel_display_power_put] disabling always-on
>linux-bc55:/etc #

Actions: View

Attachments on bug 85924: 108975 | 110305 | 113910 | 113911 | 113912 | 113913 | 114200 | 114201 | 114202 | 114203 | 114482 | 114724 | 115826 | 115935 | 116153

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.