Attachment 109342 Details for Bug 86202 – dmesg log showing problem

dmesg log showing problem

dmesg.edid (text/plain), 106.80 KB, created by Egbert Eich on 2014-11-12 14:22:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Egbert Eich

Created: 2014-11-12 14:22:52 UTC

Size: 106.80 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.18.0-rc4-4-default+ (eich@sles12) (gcc version 4.8.1 20130909 [gcc-4_8-branch revision 202388] (SUSE Linux) ) #7 SMP Wed Nov 12 14:45:31 CET 2014
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.18.0-rc4-4-default+ root=UUID=9a7b6bc7-4677-4c96-94c0-15393a486268 ip=dhcp resume=/dev/disk/by-uuid/40b50756-630e-435b-8141-86ca06b98ef5 splash=silent quiet crashkernel=220M-:110M showopts drm.debug=0x4
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008d7ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000008d800-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9690fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000b9691000-0x00000000b96c0fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000b96c1000-0x00000000b96d9fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000b96da000-0x00000000b9820fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000b9821000-0x00000000b9ffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.8 present.
>[    0.000000] DMI: Hewlett-Packard HP RP2 Retail System Model 2000/2176, BIOS 02.02 06/16/2014
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-E7FFF write-through
>[    0.000000]   E8000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask F80000000 write-back
>[    0.000000]   1 base 080000000 mask FC0000000 write-back
>[    0.000000]   2 base 0BA000000 mask FFE000000 uncachable
>[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
>[    0.000000]   4 base 100000000 mask FC0000000 write-back
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] e820: update [mem 0xba000000-0xffffffff] usable ==> reserved
>[    0.000000] e820: last_pfn = 0xb9691 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [ffff8800000fd6e0]
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff880000087000] 87000 size 24576
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x01f5f000, 0x01f5ffff] PGTABLE
>[    0.000000] BRK [0x01f60000, 0x01f60fff] PGTABLE
>[    0.000000] BRK [0x01f61000, 0x01f61fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
>[    0.000000]  [mem 0x13fe00000-0x13fffffff] page 2M
>[    0.000000] BRK [0x01f62000, 0x01f62fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
>[    0.000000]  [mem 0x13c000000-0x13fdfffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
>[    0.000000]  [mem 0x100000000-0x13bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xb9690fff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0xb95fffff] page 2M
>[    0.000000]  [mem 0xb9600000-0xb9690fff] page 4k
>[    0.000000] RAMDISK: [mem 0x366f4000-0x37371fff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 HPQOEM)
>[    0.000000] ACPI: XSDT 0x00000000B96C6080 000084 (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 0x00000000B96D7DF0 00010C (v05 HPQOEM SLIC-CPC 01072009 AMI  00010013)
>[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20140926/tbfadt-618)
>[    0.000000] ACPI: DSDT 0x00000000B96C6198 011C57 (v02 HPQOEM SLIC-CPC 01072009 INTL 20120913)
>[    0.000000] ACPI: FACS 0x00000000B981EF80 000040
>[    0.000000] ACPI: APIC 0x00000000B96D7F00 000084 (v03 HPQOEM SLIC-CPC 01072009 AMI  00010013)
>[    0.000000] ACPI: FPDT 0x00000000B96D7F88 000044 (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
>[    0.000000] ACPI: MCFG 0x00000000B96D7FD0 00003C (v01 HPQOEM SLIC-CPC 01072009 MSFT 00000097)
>[    0.000000] ACPI: LPIT 0x00000000B96D8010 000104 (v01 HPQOEM SLIC-CPC 00000003 VLV2 0100000D)
>[    0.000000] ACPI: HPET 0x00000000B96D8118 000038 (v01 HPQOEM SLIC-CPC 01072009 AMI. 00000005)
>[    0.000000] ACPI: SSDT 0x00000000B96D8150 000763 (v01 PmRef  CpuPm    00003000 INTL 20061109)
>[    0.000000] ACPI: SSDT 0x00000000B96D88B8 000290 (v01 PmRef  Cpu0Tst  00003000 INTL 20061109)
>[    0.000000] ACPI: SSDT 0x00000000B96D8B48 00017A (v01 PmRef  ApTst    00003000 INTL 20061109)
>[    0.000000] ACPI: UEFI 0x00000000B96D8CC8 000042 (v01 HPQOEM SLIC-CPC 00000000      00000000)
>[    0.000000] ACPI: DBGP 0x00000000B96D8D10 000034 (v01 HPQOEM SLIC-CPC 01072009 AMI  00010013)
>[    0.000000] ACPI: SSDT 0x00000000B96D8D48 000843 (v01 HPQOEM SLIC-CPC 00000001 INTL 20061109)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x13ffd7000-0x13fffcfff]
>[    0.000000] Reserving 110MB of memory at 752MB for crashkernel (System RAM: 3990MB)
>[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x13fffffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x0008cfff]
>[    0.000000]   node   0: [mem 0x00100000-0xb9690fff]
>[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
>[    0.000000] Initmem setup node 0 [mem 0x00001000-0x13fffffff]
>[    0.000000] On node 0 totalpages: 1021469
>[    0.000000]   DMA zone: 56 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3980 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 10327 pages used for memmap
>[    0.000000]   DMA32 zone: 755345 pages, LIFO batch:31
>[    0.000000]   Normal zone: 3584 pages used for memmap
>[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
>[    0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
>[    0.000000] Reserving Intel graphics stolen memory at 0xbb000000-0xbeffffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x0])
>[    0.000000] ACPI: NMI not connected to LINT 1!
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x0])
>[    0.000000] ACPI: NMI not connected to LINT 1!
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x0])
>[    0.000000] ACPI: NMI not connected to LINT 1!
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x0])
>[    0.000000] ACPI: NMI not connected to LINT 1!
>[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0008d000-0x0008dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0008e000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xb9691000-0xb96c0fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xb96c1000-0xb96d9fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xb96da000-0xb9820fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xb9821000-0xb9ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbaffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbeffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xe00f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffafffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
>[    0.000000] e820: [mem 0xbf000000-0xe00f7fff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 29 pages/cpu @ffff88013fc00000 s81856 r8192 d28736 u524288
>[    0.000000] pcpu-alloc: s81856 r8192 d28736 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1007481
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.18.0-rc4-4-default+ root=UUID=9a7b6bc7-4677-4c96-94c0-15393a486268 ip=dhcp resume=/dev/disk/by-uuid/40b50756-630e-435b-8141-86ca06b98ef5 splash=silent quiet crashkernel=220M-:110M showopts drm.debug=0x4
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] AGP: Checking aperture...
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] Memory: 3820316K/4085876K available (5430K kernel code, 1216K rwdata, 2728K rodata, 1868K init, 2380K bss, 265560K reserved)
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
>[    0.000000] NR_IRQS:524544 nr_irqs:1024 0
>[    0.000000] spurious 8259A interrupt: IRQ7.
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] allocated 16777216 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.000000] Maximum core-clock to bus-clock ratio: 0x18
>[    0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
>[    0.000000] TSC runs at 1996800 KHz
>[    0.000000] lapic_timer_frequency = 332800
>[    0.000000] tsc: Detected 1996.800 MHz processor
>[    0.000040] Calibrating delay loop (skipped), value calculated using timer frequency.. 3993.60 BogoMIPS (lpj=7987200)
>[    0.000046] pid_max: default: 32768 minimum: 301
>[    0.000066] ACPI: Core revision 20140926
>[    0.041803] ACPI: All ACPI Tables successfully acquired
>[    0.060787] Security Framework initialized
>[    0.060807] AppArmor: AppArmor initialized
>[    0.061372] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.063315] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.064224] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.064239] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.064642] Initializing cgroup subsys memory
>[    0.064660] Initializing cgroup subsys devices
>[    0.064669] Initializing cgroup subsys freezer
>[    0.064675] Initializing cgroup subsys blkio
>[    0.064681] Initializing cgroup subsys perf_event
>[    0.064689] Initializing cgroup subsys hugetlb
>[    0.064729] CPU: Physical Processor ID: 0
>[    0.064732] CPU: Processor Core ID: 0
>[    0.064738] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.069521] mce: CPU supports 6 MCE banks
>[    0.069532] CPU0: Thermal monitoring enabled (TM1)
>[    0.069543] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
>Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
>[    0.069663] Freeing SMP alternatives memory: 20K (ffffffff81d05000 - ffffffff81d0a000)
>[    0.070829] ftrace: allocating 21153 entries in 83 pages
>[    0.083272] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>[    0.122977] smpboot: CPU0: Intel(R) Celeron(R) CPU  J1900  @ 1.99GHz (fam: 06, model: 37, stepping: 08)
>[    0.123005] TSC deadline timer enabled
>[    0.123042] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
>[    0.123058] ... version:                3
>[    0.123060] ... bit width:              40
>[    0.123062] ... generic registers:      2
>[    0.123064] ... value mask:             000000ffffffffff
>[    0.123067] ... max period:             000000ffffffffff
>[    0.123069] ... fixed-purpose events:   3
>[    0.123071] ... event mask:             0000000700000003
>[    0.125668] x86: Booting SMP configuration:
>[    0.125674] .... node  #0, CPUs:      #1 #2 #3
>[    0.179676] x86: Booted up 1 node, 4 CPUs
>[    0.179682] smpboot: Total of 4 processors activated (15974.40 BogoMIPS)
>[    0.180283] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.180805] devtmpfs: initialized
>[    0.188479] evm: security.selinux
>[    0.188483] evm: security.ima
>[    0.188485] evm: security.capability
>[    0.188617] PM: Registering ACPI NVS region [mem 0xb96da000-0xb9820fff] (1339392 bytes)
>[    0.190836] pinctrl core: initialized pinctrl subsystem
>[    0.190898] RTC time: 18:18:00, date: 11/11/14
>[    0.191184] NET: Registered protocol family 16
>[    0.199685] cpuidle: using governor ladder
>[    0.211573] cpuidle: using governor menu
>[    0.211684] ACPI: bus type PCI registered
>[    0.211689] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.211810] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.211815] PCI: not using MMCONFIG
>[    0.211818] PCI: Using configuration type 1 for base access
>[    0.224515] ACPI: Added _OSI(Module Device)
>[    0.224520] ACPI: Added _OSI(Processor Device)
>[    0.224523] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.224526] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.269463] ACPI: Dynamic OEM Table Load:
>[    0.269478] ACPI: SSDT 0xFFFF880139AA5400 0003D7 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
>[    0.271014] ACPI: Dynamic OEM Table Load:
>[    0.271025] ACPI: SSDT 0xFFFF8801398CF800 000433 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
>[    0.296668] ACPI: Dynamic OEM Table Load:
>[    0.296678] ACPI: SSDT 0xFFFF880139885000 00015F (v01 PmRef  ApIst    00003000 INTL 20061109)
>[    0.307946] ACPI: Dynamic OEM Table Load:
>[    0.307956] ACPI: SSDT 0xFFFF880139AEBDC0 00008D (v01 PmRef  ApCst    00003000 INTL 20061109)
>[    0.322285] ACPI: Interpreter enabled
>[    0.322301] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
>[    0.322314] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
>[    0.322351] ACPI: (supports S0 S3 S4 S5)
>[    0.322355] ACPI: Using IOAPIC for interrupt routing
>[    0.322425] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.324996] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.325800] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.755447] ACPI: Power Resource [USBC] (on)
>[    0.758209] ACPI: Power Resource [PLPE] (on)
>[    0.758706] ACPI: Power Resource [PLPE] (on)
>[    0.760132] ACPI: Power Resource [FN00] (off)
>[    0.761912] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.761925] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.762499] \_SB_.PCI0:_OSC invalid UUID
>[    0.762503] _OSC request data:1 1f 0 
>[    0.762511] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
>[    0.764075] PCI host bridge to bus 0000:00
>[    0.764082] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.764088] pci_bus 0000:00: root bus resource [io  0x0000-0x006f]
>[    0.764092] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7]
>[    0.764096] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.764101] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.764105] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
>[    0.764109] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
>[    0.764113] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0716ffe]
>[    0.764126] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
>[    0.764352] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
>[    0.764369] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
>[    0.764383] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
>[    0.764395] pci 0000:00:02.0: reg 0x20: [io  0xf080-0xf087]
>[    0.764632] pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
>[    0.764655] pci 0000:00:13.0: reg 0x10: [io  0xf070-0xf077]
>[    0.764666] pci 0000:00:13.0: reg 0x14: [io  0xf060-0xf063]
>[    0.764677] pci 0000:00:13.0: reg 0x18: [io  0xf050-0xf057]
>[    0.764688] pci 0000:00:13.0: reg 0x1c: [io  0xf040-0xf043]
>[    0.764699] pci 0000:00:13.0: reg 0x20: [io  0xf020-0xf03f]
>[    0.764711] pci 0000:00:13.0: reg 0x24: [mem 0xd0716000-0xd07167ff]
>[    0.764768] pci 0000:00:13.0: PME# supported from D3hot
>[    0.764964] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
>[    0.764986] pci 0000:00:14.0: reg 0x10: [mem 0xd0700000-0xd070ffff 64bit]
>[    0.765056] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.765223] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.765330] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
>[    0.765359] pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
>[    0.765374] pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
>[    0.765489] pci 0000:00:1a.0: PME# supported from D0 D3hot
>[    0.765688] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
>[    0.765714] pci 0000:00:1b.0: reg 0x10: [mem 0xd0710000-0xd0713fff 64bit]
>[    0.765796] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.765988] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
>[    0.766063] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.766255] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
>[    0.766329] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.766523] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400
>[    0.766597] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.766797] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
>[    0.767059] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
>[    0.767097] pci 0000:00:1f.3: reg 0x10: [mem 0xd0714000-0xd071401f]
>[    0.767170] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
>[    0.767563] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.767734] pci 0000:02:00.0: [14e4:1691] type 00 class 0x020000
>[    0.767772] pci 0000:02:00.0: reg 0x10: [mem 0xd0600000-0xd060ffff 64bit]
>[    0.767975] pci 0000:02:00.0: PME# supported from D3hot D3cold
>[    0.768050] pci 0000:02:00.0: System wakeup disabled by ACPI
>[    0.776094] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.776103] pci 0000:00:1c.1:   bridge window [mem 0xd0600000-0xd06fffff]
>[    0.776236] pci 0000:00:1c.3: PCI bridge to [bus 03]
>[    0.985134] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.985381] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.985629] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.985875] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    0.986123] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.986365] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.986611] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    0.986856] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    0.987748] ACPI: Enabled 5 GPEs in block 00 to 3F
>[    0.987978] vgaarb: setting as boot device: PCI:0000:00:02.0
>[    0.987985] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.987992] vgaarb: loaded
>[    0.987995] vgaarb: bridge control possible 0000:00:02.0
>[    0.988153] PCI: Using ACPI for IRQ routing
>[    0.994102] PCI: pci_cache_line_size set to 64 bytes
>[    0.994147] e820: reserve RAM buffer [mem 0x0008d800-0x0008ffff]
>[    0.994152] e820: reserve RAM buffer [mem 0xb9691000-0xbbffffff]
>[    0.994396] NetLabel: Initializing
>[    0.994399] NetLabel:  domain hash size = 128
>[    0.994401] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.994427] NetLabel:  unlabeled traffic allowed by default
>[    0.994531] Switched to clocksource refined-jiffies
>[    1.006024] AppArmor: AppArmor Filesystem Enabled
>[    1.006095] pnp: PnP ACPI init
>[    1.006238] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    1.006593] system 00:01: [io  0x0680-0x069f] has been reserved
>[    1.006599] system 00:01: [io  0x0400-0x047f] has been reserved
>[    1.006604] system 00:01: [io  0x0500-0x05fe] has been reserved
>[    1.006609] system 00:01: [io  0x0600-0x061f] has been reserved
>[    1.006616] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.007603] system 00:02: [io  0x0a00-0x0a1f] has been reserved
>[    1.007610] system 00:02: [io  0x0a20-0x0a3f] has been reserved
>[    1.007615] system 00:02: [io  0x0800-0x08fe] has been reserved
>[    1.007622] system 00:02: [io  0x0b40-0x0b5f] has been reserved
>[    1.007627] system 00:02: [io  0x0b60-0x0b7f] has been reserved
>[    1.007632] system 00:02: [io  0x0b80-0x0b9f] has been reserved
>[    1.007638] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.008442] pnp 00:03: [dma 0 disabled]
>[    1.008551] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
>[    1.009267] pnp 00:04: [dma 0 disabled]
>[    1.009378] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
>[    1.010042] system 00:05: [io  0x0b00-0x0b2f] has been reserved
>[    1.010048] system 00:05: [io  0x0b30-0x0b3f] has been reserved
>[    1.010053] system 00:05: [io  0x0b40-0x0b4f] has been reserved
>[    1.010059] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.010942] ACPI: IRQ 5 override to edge, high
>[    1.010955] pnp 00:06: [dma 0 disabled]
>[    1.011065] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
>[    1.011945] ACPI: IRQ 6 override to edge, high
>[    1.011957] pnp 00:07: [dma 0 disabled]
>[    1.012063] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>[    1.216828] system 00:08: [mem 0xe0000000-0xefffffff] could not be reserved
>[    1.216834] system 00:08: [mem 0xfed01000-0xfed01fff] has been reserved
>[    1.216839] system 00:08: [mem 0xfed03000-0xfed03fff] has been reserved
>[    1.216844] system 00:08: [mem 0xfed04000-0xfed04fff] has been reserved
>[    1.216849] system 00:08: [mem 0xfed0c000-0xfed0ffff] has been reserved
>[    1.216854] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
>[    1.216859] system 00:08: [mem 0xfed1c000-0xfed1cfff] has been reserved
>[    1.216863] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
>[    1.216868] system 00:08: [mem 0xfef00000-0xfeffffff] has been reserved
>[    1.216874] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.217572] pnp: PnP ACPI: found 9 devices
>[    1.226850] Switched to clocksource acpi_pm
>[    1.226874] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
>[    1.226885] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
>[    1.226891] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
>[    1.226902] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
>[    1.226907] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
>[    1.226918] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
>[    1.226923] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
>[    1.226928] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
>[    1.226939] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
>[    1.226944] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    1.226949] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    1.226953] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
>[    1.226957] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    1.226962] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    1.226966] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    1.226970] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    1.226981] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
>[    1.226986] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
>[    1.226995] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
>[    1.227000] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
>[    1.227009] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
>[    1.227013] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
>[    1.227019] pci 0000:00:1c.3: BAR 14: no space for [mem size 0x00200000]
>[    1.227024] pci 0000:00:1c.3: BAR 14: failed to assign [mem size 0x00200000]
>[    1.227032] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
>[    1.227037] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
>[    1.227044] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
>[    1.227049] pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
>[    1.227055] pci 0000:00:1c.3: BAR 13: assigned [io  0x3000-0x3fff]
>[    1.227063] pci 0000:00:1c.3: BAR 14: no space for [mem size 0x00200000]
>[    1.227067] pci 0000:00:1c.3: BAR 14: failed to assign [mem size 0x00200000]
>[    1.227076] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref]
>[    1.227080] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
>[    1.227088] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
>[    1.227092] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
>[    1.227098] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
>[    1.227102] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
>[    1.227111] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
>[    1.227115] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
>[    1.227119] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    1.227124] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>[    1.227136] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    1.227141] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
>[    1.227147] pci 0000:00:1c.1:   bridge window [mem 0xd0600000-0xd06fffff]
>[    1.227156] pci 0000:00:1c.3: PCI bridge to [bus 03]
>[    1.227160] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
>[    1.227172] pci_bus 0000:00: resource 4 [io  0x0000-0x006f]
>[    1.227176] pci_bus 0000:00: resource 5 [io  0x0078-0x0cf7]
>[    1.227180] pci_bus 0000:00: resource 6 [io  0x0d00-0xffff]
>[    1.227184] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
>[    1.227188] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
>[    1.227192] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
>[    1.227196] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xd0716ffe]
>[    1.227200] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
>[    1.227204] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
>[    1.227208] pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd06fffff]
>[    1.227212] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
>[    1.227331] NET: Registered protocol family 2
>[    1.227637] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    1.227788] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    1.227948] TCP: Hash tables configured (established 32768 bind 32768)
>[    1.228002] TCP: reno registered
>[    1.228021] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    1.228104] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    1.228280] NET: Registered protocol family 1
>[    1.228313] pci 0000:00:02.0: Video device with shadowed ROM
>[    1.228676] PCI: CLS 64 bytes, default 64
>[    1.228777] Unpacking initramfs...
>[    2.706346] Freeing initrd memory: 12792K (ffff8800366f4000 - ffff880037372000)
>[    2.706366] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    2.706371] software IO TLB [mem 0xb5691000-0xb9691000] (64MB) mapped at [ffff8800b5691000-ffff8800b9690fff]
>[    2.706842] microcode: CPU0 sig=0x30678, pf=0x4, revision=0x815
>[    2.706853] microcode: CPU1 sig=0x30678, pf=0x4, revision=0x815
>[    2.706869] microcode: CPU2 sig=0x30678, pf=0x4, revision=0x815
>[    2.706886] microcode: CPU3 sig=0x30678, pf=0x4, revision=0x815
>[    2.707005] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    2.707073] Scanning for low memory corruption every 60 seconds
>[    2.707748] futex hash table entries: 1024 (order: 4, 65536 bytes)
>[    2.707780] Initialise system trusted keyring
>[    2.707840] audit: initializing netlink subsys (disabled)
>[    2.707874] audit: type=2000 audit(1415729882.683:1): initialized
>[    2.708476] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    2.708543] zpool: loaded
>[    2.708548] zbud: loaded
>[    2.708808] VFS: Disk quotas dquot_6.5.2
>[    2.708852] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    2.708967] msgmni has been set to 7486
>[    2.710587] alg: No test for stdrng (krng)
>[    2.710616] Key type asymmetric registered
>[    2.710623] Asymmetric key parser 'x509' registered
>[    2.710680] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    2.710776] io scheduler noop registered
>[    2.710782] io scheduler deadline registered
>[    2.710810] io scheduler cfq registered (default)
>[    2.711513] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    2.711551] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    2.711663] efifb: probing for efifb
>[    2.711671] efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 64k, total 64k
>[    2.711675] efifb: mode is 640x480x1, linelength=80, pages=1
>[    2.711676] efifb: scrolling: redraw
>[    2.711680] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    2.714483] Console: switching to colour frame buffer device 80x30
>[    2.717040] fb0: EFI VGA frame buffer device
>[    2.717059] intel_idle: MWAIT substates: 0x33000020
>[    2.717063] intel_idle: v0.4 model 0x37
>[    2.717065] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    2.717573] GHES: HEST is not enabled!
>[    2.717679] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
>[    2.738352] serial 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    2.759194] serial 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
>[    2.779990] serial 00:06: ttyS2 at I/O 0x3e8 (irq = 5, base_baud = 115200) is a 16550A
>[    2.800734] serial 00:07: ttyS3 at I/O 0x2e8 (irq = 6, base_baud = 115200) is a 16550A
>[    2.809562] hpet: number irqs doesn't agree with number of timers
>[    2.809792] Non-volatile memory driver v1.3
>[    2.809799] Linux agpgart interface v0.103
>[    2.810079] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    2.813819] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    2.813837] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    2.815159] mousedev: PS/2 mouse device common for all mice
>[    2.816196] rtc_cmos 00:00: RTC can wake from S4
>[    2.816836] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
>[    2.816873] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
>[    2.816905] Intel P-state driver initializing.
>[    2.817180] ledtrig-cpu: registered to indicate activity on CPUs
>[    2.817239] hidraw: raw HID events driver (C) Jiri Kosina
>[    2.817367] TCP: cubic registered
>[    2.818500] NET: Registered protocol family 10
>[    2.823478] Loading compiled-in X.509 certificates
>[    2.826308] Loaded X.509 cert 'Magrathea: Glacier signing key: e38272d635b69c3d5b34c2387fa906f021ed8edf'
>[    2.826351] registered taskstats version 1
>[    2.836514] Key type trusted registered
>[    2.845189] Key type encrypted registered
>[    2.852271] AppArmor: AppArmor sha1 policy hashing enabled
>[    2.852283] ima: No TPM chip found, activating TPM-bypass!
>[    2.852355] evm: HMAC attrs: 0x1
>[    2.853463]   Magic number: 6:39:342
>[    2.853745] PM: Checking hibernation image partition /dev/disk/by-uuid/40b50756-630e-435b-8141-86ca06b98ef5
>[    2.871436] PM: Hibernation image not present or could not be loaded.
>[    2.875861] Freeing unused kernel memory: 1868K (ffffffff81b32000 - ffffffff81d05000)
>[    2.875869] Write protecting the kernel read-only data: 10240k
>[    2.882647] Freeing unused kernel memory: 704K (ffff880001550000 - ffff880001600000)
>[    2.892235] Freeing unused kernel memory: 1368K (ffff8800018aa000 - ffff880001a00000)
>[    2.896717] random: systemd urandom read with 2 bits of entropy available
>[    2.900375] autofs4: module verification failed: signature and/or  required key missing - tainting kernel
>[    3.076792] SCSI subsystem initialized
>[    3.390310] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
>[    3.390491] ACPI: Power Button [PWRB]
>[    3.390647] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
>[    3.390842] ACPI: Sleep Button [SLPB]
>[    3.391007] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>[    3.391202] ACPI: Power Button [PWRF]
>[    3.476285] [drm] Initialized drm 1.1.0 20060810
>[    3.490052] [drm:intel_detect_pch] No PCH found.
>[    3.490171] [drm] Memory usable by graphics device = 2048M
>[    3.490176] [drm] Replacing VGA console driver
>[    3.490183] checking generic (a0000 10000) vs hw (c0000000 10000000)
>[    3.490187] fb: switching to inteldrmfb from EFI VGA
>[    3.490228] Console: switching to colour dummy device 80x25
>[    3.493339] i915 0000:00:02.0: irq 87 for MSI/MSI-X
>[    3.493360] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    3.493363] [drm] Driver supports precise vblank timestamp query.
>[    3.493369] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz
>[    3.493374] [drm:validate_vbt] Using VBT from OpRegion: $VBT VALLEYVIEW     d
>[    3.493380] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    3.493384] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    3.493388] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    3.493394] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    3.493400] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 85500 1366 1436 1580 1792 768 769 773 798 0x8 0xa
>[    3.493404] [drm:parse_lfp_panel_data] VBT initial LVDS value 0
>[    3.493409] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    3.493413] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    3.493418] [drm:parse_driver_features] DRRS State Enabled:1
>[    3.493439] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    3.493452] [drm:i915_gem_init_stolen] found 67108864 bytes of stolen memory at bb000000
>[    3.503954] libata version 3.00 loaded.
>[    3.523377] [drm:intel_display_power_get] enabling always-on
>[    3.523384] [drm:intel_display_power_get] enabling display
>[    3.547600] [drm:intel_display_power_get] enabling dpio-tx-b-01
>[    3.571641] [drm:intel_display_power_get] enabling dpio-tx-b-23
>[    3.595686] [drm:intel_display_power_get] enabling dpio-tx-c-01
>[    3.619648] [drm:intel_display_power_get] enabling dpio-tx-c-23
>[    3.643695] [drm:intel_display_power_get] enabling dpio-common
>[    3.708188] tsc: Refined TSC clocksource calibration: 1999.999 MHz
>[    3.812080] [drm:intel_modeset_init] 2 display pipes available.
>[    3.812104] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    3.812513] [drm:intel_crt_reset] crt adpa set to 0xf40018
>[    3.812595] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    3.812660] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    3.812912] [drm:intel_dp_init_connector] Adding eDP connector on port C
>[    3.908217] [drm:vlv_initial_power_sequencer_setup] initial power sequencer for port C: pipe A
>[    3.908226] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
>[    3.908229] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    3.908232] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    3.908234] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    3.908240] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[    4.004546] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-eDP-1
>[    4.389148] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[    4.389156] [drm:edp_panel_vdd_on] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000f
>[    4.638023] [drm:intel_dp_get_dpcd] DPCD: 11 0a 82 41 00 00 01 80 02 00 00 00 0f 03 00
>[    4.710906] Switched to clocksource tsc
>[    5.118908] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x87d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[    7.515567] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[    7.515579] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd0007
>[    7.996496] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[    7.996510] [drm:edp_panel_vdd_on] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000f
>[   10.585565] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   10.585578] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd0007
>[   11.066506] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   11.066521] [drm:edp_panel_vdd_on] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000f
>[   13.655532] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   13.655544] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd0007
>[   14.136467] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   14.136487] [drm:edp_panel_vdd_on] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000f
>[   16.733583] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   16.733597] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd0007
>[   17.214477] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   17.214491] [drm:edp_panel_vdd_on] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000f
>[   19.803514] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   19.803527] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd0007
>[   20.276522] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   20.276542] [drm:edp_panel_vdd_on] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000f
>[   22.865500] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   22.865513] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd0007
>[   23.346433] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   23.346453] [drm:edp_panel_vdd_on] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000f
>[   25.927447] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   25.927460] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd0007
>[   26.408439] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   26.408454] [drm:edp_panel_vdd_on] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000f
>[   28.989415] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   28.989427] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd0007
>[   29.462391] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   29.462405] [drm:edp_panel_vdd_on] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000f
>[   32.051384] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   32.051397] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd0007
>[   32.524300] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   32.524315] [drm:edp_panel_vdd_on] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000f
>[   34.920996] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   34.921005] [drm:intel_dp_drrs_init] VBT doesn't support DRRS
>[   34.921012] [drm:intel_edp_init_connector] using pipe A for initial backlight setup
>[   34.921022] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 7812/7812
>[   34.921036] [drm:intel_dsi_init] 
>[   34.929091] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: enabled
>[   34.929102] [drm:intel_modeset_readout_hw_state] [CRTC:13] hw state readout: disabled
>[   34.929109] [drm:intel_modeset_readout_hw_state] [ENCODER:17:DAC-17] hw state readout: disabled, pipe A
>[   34.929116] [drm:intel_modeset_readout_hw_state] [ENCODER:18:TMDS-18] hw state readout: disabled, pipe A
>[   34.929122] [drm:intel_modeset_readout_hw_state] [ENCODER:23:TMDS-23] hw state readout: disabled, pipe A
>[   34.929128] [drm:intel_modeset_readout_hw_state] [ENCODER:25:TMDS-25] hw state readout: disabled, pipe A
>[   34.929137] [drm:intel_modeset_readout_hw_state] [ENCODER:27:TMDS-27] hw state readout: enabled, pipe A
>[   34.929150] [drm:intel_modeset_readout_hw_state] [CONNECTOR:28:eDP-1] hw state readout: enabled
>[   34.929155] [drm:intel_modeset_readout_hw_state] [CONNECTOR:16:VGA-1] hw state readout: disabled
>[   34.929161] [drm:intel_modeset_readout_hw_state] [CONNECTOR:19:HDMI-A-1] hw state readout: disabled
>[   34.929167] [drm:intel_modeset_readout_hw_state] [CONNECTOR:24:DP-1] hw state readout: disabled
>[   34.929172] [drm:intel_modeset_readout_hw_state] [CONNECTOR:26:HDMI-A-2] hw state readout: disabled
>[   34.929181] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A
>[   34.929185] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   34.929190] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0
>[   34.929195] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   34.929201] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2670373, gmch_n: 8388608, link_m: 148354, link_n: 524288, tu: 64
>[   34.929206] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   34.929210] [drm:intel_dump_pipe_config] requested mode:
>[   34.929218] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 640 0 0 0 480 0 0 0 0x0 0x0
>[   34.929221] [drm:intel_dump_pipe_config] adjusted mode:
>[   34.929228] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x9
>[   34.929234] [drm:intel_dump_crtc_timings] crtc timings: 76399 1366 1402 1450 1610 768 771 776 790, type: 0x0 flags: 0x9
>[   34.929238] [drm:intel_dump_pipe_config] port clock: 270000
>[   34.929243] [drm:intel_dump_pipe_config] pipe src size: 640x480
>[   34.929248] [drm:intel_dump_pipe_config] gmch pfit: control: 0x80000000, ratios: 0x0a00077f, lvds border: 0x00000000
>[   34.929252] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   34.929256] [drm:intel_dump_pipe_config] ips: 0
>[   34.929260] [drm:intel_dump_pipe_config] double wide: 0
>[   34.929266] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[   34.929272] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
>[   34.929278] [drm:intel_dump_pipe_config] [CRTC:13][setup_hw_state] config for pipe B
>[   34.929282] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[   34.929286] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[   34.929291] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   34.929296] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   34.929301] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   34.929305] [drm:intel_dump_pipe_config] requested mode:
>[   34.929311] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   34.929315] [drm:intel_dump_pipe_config] adjusted mode:
>[   34.929321] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   34.929327] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   34.929331] [drm:intel_dump_pipe_config] port clock: 0
>[   34.929335] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[   34.929339] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   34.929344] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   34.929348] [drm:intel_dump_pipe_config] ips: 0
>[   34.929351] [drm:intel_dump_pipe_config] double wide: 0
>[   34.929357] [drm:intel_connector_check_state] [CONNECTOR:28:eDP-1]
>[   34.929365] [drm:check_encoder_state] [ENCODER:17:DAC-17]
>[   34.929371] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[   34.929376] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
>[   34.929380] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[   34.929385] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
>[   34.929390] [drm:check_crtc_state] [CRTC:8]
>[   34.936683] [drm:check_crtc_state] [CRTC:13]
>[   34.936708] [drm:i9xx_get_plane_config] pipe/plane 0/0 with fb: size=640x480@32, offset=0, pitch 3200, size 0x177000
>[   34.936714] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=177000
>[   34.936739] [drm:intel_alloc_plane_obj] plane fb obj ffff8800b3b87e40
>[   34.936748] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 177000
>[   34.936753] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [177000, 7ffff000]
>[   34.941124] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[   34.949098] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[   34.949178] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[   34.949278] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=3efa000, gtt_offset=ffffffff, size=6000
>[   35.013326] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered
>[   35.013498] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:eDP-1]
>[   35.013503] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
>[   35.044415] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[   35.044649] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
>[   35.045135] [drm] Initialized i915 1.6.0 20141107 for 0000:00:02.0 on minor 0
>[   35.045241] ahci 0000:00:13.0: version 3.0
>[   35.045455] ahci 0000:00:13.0: controller can't do DEVSLP, turning off
>[   35.045505] ahci 0000:00:13.0: irq 88 for MSI/MSI-X
>[   35.061330] ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
>[   35.061343] ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso 
>[   35.062926] scsi host0: ahci
>[   35.063701] scsi host1: ahci
>[   35.063879] ata1: SATA max UDMA/133 abar m2048@0xd0716000 port 0xd0716100 irq 88
>[   35.063884] ata2: DUMMY
>[   35.109388] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   35.109401] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd0007
>[   35.389830] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[   35.391735] ata1.00: ATA-9: HGST HTS725032A7E630, GHBOA470, max UDMA/133
>[   35.391745] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[   35.393938] ata1.00: configured for UDMA/133
>[   35.581908] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   35.581917] [drm:edp_panel_vdd_on] PP_STATUS: 0xc0000008 PP_CONTROL: 0xabcd000f
>[   35.870824] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[   36.255583] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[   36.351781] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   36.351796] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:eDP-1] probed modes :
>[   36.351805] [drm:drm_mode_debug_printmodeline] Modeline 29:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   36.351813] [drm:drm_mode_debug_printmodeline] Modeline 30:"1366x768" 40 50930 1366 1402 1450 1610 768 771 776 790 0x40 0x9
>[   36.351819] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1]
>[   36.351824] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[   36.383825] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40018
>[   36.391840] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0xf40018, result 0
>[   36.391849] [drm:intel_crt_detect] CRT not detected via hotplug
>[   36.447945] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
>[   36.463512] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   36.463518] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   36.496045] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] disconnected
>[   36.496056] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1]
>[   36.496060] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
>[   36.592579] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   36.592589] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   36.688424] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] disconnected
>[   36.688435] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-1]
>[   36.688440] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
>[   36.880798] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-1] disconnected
>[   36.880810] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2]
>[   36.880815] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[   36.977011] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[   36.977331] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   36.977341] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   37.081207] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected
>[   37.081217] [drm:drm_setup_crtcs] 
>[   37.081225] [drm:drm_enable_connectors] connector 28 enabled? yes
>[   37.081229] [drm:drm_enable_connectors] connector 16 enabled? no
>[   37.081233] [drm:drm_enable_connectors] connector 19 enabled? no
>[   37.081237] [drm:drm_enable_connectors] connector 24 enabled? no
>[   37.081241] [drm:drm_enable_connectors] connector 26 enabled? no
>[   37.081247] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[   37.081252] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1
>[   37.081258] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:8]: 1366x768
>[   37.081263] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[   37.081267] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[   37.081271] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[   37.081275] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[   37.081280] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 8
>[   37.081290] [drm:intelfb_create] no BIOS fb, allocating a new one
>[   37.081296] [drm:i915_gem_object_create_stolen] creating stolen object: size=408000
>[   37.083038] [drm:intelfb_create] allocated 1366x768 fb: 0x001e1000, bo ffff880036a6fe40
>[   37.083257] fbcon: inteldrmfb (fb0) is primary device
>[   37.083290] [drm:intel_crtc_set_config] [CRTC:8] [FB:36] #connectors=1 (x y) (0 0)
>[   37.083295] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[   37.083297] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   37.083300] [drm:drm_mode_debug_printmodeline] Modeline 35:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   37.083302] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=1
>[   37.083304] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
>[   37.083307] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   37.083310] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains
>[   37.083312] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[   37.083316] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 76400KHz
>[   37.083318] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18
>[   37.083319] [drm:intel_dp_compute_config] DP link bw required 137520 available 432000
>[   37.083322] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[   37.083323] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
>[   37.083324] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   37.083325] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[   37.083327] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   37.083329] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2670373, gmch_n: 8388608, link_m: 148354, link_n: 524288, tu: 64
>[   37.083330] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   37.083331] [drm:intel_dump_pipe_config] requested mode:
>[   37.083334] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   37.083334] [drm:intel_dump_pipe_config] adjusted mode:
>[   37.083337] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   37.083339] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9
>[   37.083340] [drm:intel_dump_pipe_config] port clock: 270000
>[   37.083341] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[   37.083343] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   37.083344] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   37.083345] [drm:intel_dump_pipe_config] ips: 0
>[   37.083345] [drm:intel_dump_pipe_config] double wide: 0
>[   37.083350] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[   37.285239] [drm:intel_edp_backlight_off] 
>[   37.970576] [drm:edp_panel_off] Turn eDP port C panel power off
>[   37.970578] [drm:wait_panel_off] Wait for panel power off time
>[   37.970582] [drm:wait_panel_status] mask b0000000 value 00000000 status c0000008 control abcd0000
>[   38.002635] [drm:wait_panel_status] Wait complete
>[   38.203028] [drm:intel_dp_link_down] 
>[   38.259141] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[   38.259143] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
>[   38.539825] [drm:intel_display_power_put] disabling always-on
>[   39.084753] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   39.084755] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[   39.084758] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[   39.084759] [drm:wait_panel_status] Wait complete
>[   39.084762] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[   39.084763] [drm:edp_panel_vdd_on] eDP port C panel power wasn't enabled
>[   39.289141] [drm:edp_panel_on] Turn eDP port C panel power on
>[   39.289143] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[   39.289146] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[   39.289147] [drm:wait_panel_status] Wait complete
>[   39.289149] [drm:wait_panel_on] Wait for panel power on
>[   39.289151] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[   39.449597] [drm:wait_panel_status] Wait complete
>[   39.449600] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   39.449603] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[   39.834206] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[   39.834210] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[   40.371609] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[   40.948739] [drm:intel_dp_start_link_train] clock recovery OK
>[   41.525859] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[   41.718282] [drm:g4x_check_srwm] SR watermark: display plane 60, cursor 2
>[   41.718285] [drm:g4x_check_srwm] SR watermark: display plane 117, cursor 2
>[   41.718288] [drm:valleyview_update_wm] Setting FIFO watermarks - A: plane=111, cursor=2, B: plane=2, cursor=2, SR: plane=60, cursor=2
>[   41.718292] [drm:intel_set_memory_cxsr] memory self-refresh is enabled
>[   41.718299] [drm:intel_edp_backlight_on] 
>[   41.718301] [drm:intel_panel_enable_backlight] pipe A
>[   41.910630] [drm:i9xx_update_primary_plane] Writing base 001E1000 00000000 0 0 5504
>[   41.910645] [drm:intel_connector_check_state] [CONNECTOR:28:eDP-1]
>[   41.910653] [drm:check_encoder_state] [ENCODER:17:DAC-17]
>[   41.910656] [drm:check_encoder_state] [ENCODER:18:TMDS-18]
>[   41.910659] [drm:check_encoder_state] [ENCODER:23:TMDS-23]
>[   41.910661] [drm:check_encoder_state] [ENCODER:25:TMDS-25]
>[   41.910664] [drm:check_encoder_state] [ENCODER:27:TMDS-27]
>[   41.910667] [drm:check_crtc_state] [CRTC:8]
>[   41.918700] [drm:check_crtc_state] [CRTC:13]
>[   41.918729] [drm:intel_crtc_set_config] [CRTC:13] [NOFB]
>[   41.918735] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[   41.918739] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
>[   41.918743] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[   41.918788] Console: switching to colour frame buffer device 170x48
>[   41.918807] [drm:intel_crtc_set_config] [CRTC:8] [FB:36] #connectors=1 (x y) (0 0)
>[   41.918811] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   41.918814] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
>[   41.918818] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   41.918822] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains
>[   41.918825] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[   41.918830] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 76400KHz
>[   41.918834] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18
>[   41.918836] [drm:intel_dp_compute_config] DP link bw required 137520 available 432000
>[   41.918839] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[   41.918842] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
>[   41.918843] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   41.918845] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[   41.918848] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   41.918852] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2670373, gmch_n: 8388608, link_m: 148354, link_n: 524288, tu: 64
>[   41.918854] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   41.918855] [drm:intel_dump_pipe_config] requested mode:
>[   41.918861] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   41.918862] [drm:intel_dump_pipe_config] adjusted mode:
>[   41.918867] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   41.918871] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9
>[   41.918873] [drm:intel_dump_pipe_config] port clock: 270000
>[   41.918875] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[   41.918877] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   41.918880] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   41.918881] [drm:intel_dump_pipe_config] ips: 0
>[   41.918883] [drm:intel_dump_pipe_config] double wide: 0
>[   41.928895] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[   41.928900] i915 0000:00:02.0: registered panic notifier
>[   41.951138] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS725032A7 A470 PQ: 0 ANSI: 5
>[   41.951936] scsi 0:0:0:0: Attached scsi generic sg0 type 0
>[   41.956527] [drm:intel_crtc_set_config] [CRTC:8] [FB:36] #connectors=1 (x y) (0 0)
>[   41.956540] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   41.956546] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
>[   41.956551] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   41.956557] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains
>[   41.956562] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[   41.956569] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 76400KHz
>[   41.956574] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18
>[   41.956578] [drm:intel_dp_compute_config] DP link bw required 137520 available 432000
>[   41.956583] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[   41.956587] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
>[   41.956591] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   41.956594] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[   41.956599] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   41.956604] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2670373, gmch_n: 8388608, link_m: 148354, link_n: 524288, tu: 64
>[   41.956608] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   41.956612] [drm:intel_dump_pipe_config] requested mode:
>[   41.956619] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   41.956622] [drm:intel_dump_pipe_config] adjusted mode:
>[   41.956628] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   41.956634] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9
>[   41.956637] [drm:intel_dump_pipe_config] port clock: 270000
>[   41.956640] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[   41.956645] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   41.956648] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   41.956652] [drm:intel_dump_pipe_config] ips: 0
>[   41.956655] [drm:intel_dump_pipe_config] double wide: 0
>[   41.956660] [drm:intel_crtc_set_config] [CRTC:13] [NOFB]
>[   41.956666] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[   41.956670] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
>[   41.956675] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[   41.957268] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>[   41.957276] sd 0:0:0:0: [sda] 4096-byte physical blocks
>[   41.957439] sd 0:0:0:0: [sda] Write Protect is off
>[   41.957447] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[   41.957514] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   41.958109] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5]
>[   41.958117] [drm:drm_mode_getresources] CRTC[2] CONNECTORS[5] ENCODERS[5]
>[   41.958124] [drm:drm_mode_getconnector] [CONNECTOR:28:?]
>[   41.958132] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:eDP-1]
>[   41.958135] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
>[   42.317683]  sda: sda1 sda2 < sda5 sda6 sda7 >
>[   42.320933] sd 0:0:0:0: [sda] Attached SCSI disk
>[   42.439486] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[   42.816330] raid6: sse2x1     996 MB/s
>[   42.816374] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[   42.884540] raid6: sse2x2    1513 MB/s
>[   42.912635] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   42.912650] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:eDP-1] probed modes :
>[   42.912659] [drm:drm_mode_debug_printmodeline] Modeline 29:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   42.912666] [drm:drm_mode_debug_printmodeline] Modeline 30:"1366x768" 40 50930 1366 1402 1450 1610 768 771 776 790 0x40 0x9
>[   42.912688] [drm:drm_mode_getconnector] [CONNECTOR:28:?]
>[   42.920054] [drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[   42.920067] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1]
>[   42.920119] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[   42.952639] raid6: sse2x4    2542 MB/s
>[   42.952642] raid6: using algorithm sse2x4 (2542 MB/s)
>[   42.952644] raid6: using ssse3x2 recovery algorithm
>[   42.952685] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40018
>[   42.953986] xor: measuring software checksum speed
>[   42.960709] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0xf40018, result 0
>[   42.960718] [drm:intel_crt_detect] CRT not detected via hotplug
>[   42.964340] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[   42.964349] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   42.976206] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   42.976212] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   42.992700]    prefetch64-sse:  8689.000 MB/sec
>[   43.008806] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] disconnected
>[   43.008839] [drm:drm_mode_getconnector] [CONNECTOR:16:?]
>[   43.008845] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1]
>[   43.008856] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[   43.032747]    generic_sse:  7390.000 MB/sec
>[   43.032750] xor: using function: prefetch64-sse (8689.000 MB/sec)
>[   43.040369] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40018
>[   43.040696] Btrfs loaded
>[   43.048877] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0xf40018, result 0
>[   43.048886] [drm:intel_crt_detect] CRT not detected via hotplug
>[   43.064377] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   43.064382] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   43.091627] BTRFS: device fsid 9a7b6bc7-4677-4c96-94c0-15393a486268 devid 1 transid 14864 /dev/sda7
>[   43.096525] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] disconnected
>[   43.096554] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[   43.096561] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1]
>[   43.096566] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
>[   43.132022] PM: Starting manual resume from disk
>[   43.132031] PM: Hibernation image partition 8:1 present
>[   43.132034] PM: Looking for hibernation image.
>[   43.144361] PM: Image not found (code -22)
>[   43.144369] PM: Hibernation image not present or could not be loaded.
>[   43.193751] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   43.193761] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   43.228060] BTRFS info (device sda7): disk space caching is enabled
>[   43.228067] BTRFS: has skinny extents
>[   43.289166] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] disconnected
>[   43.289197] [drm:drm_mode_getconnector] [CONNECTOR:19:?]
>[   43.289203] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1]
>[   43.289207] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
>[   43.389730] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   43.389739] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   43.489667] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] disconnected
>[   43.489698] [drm:drm_mode_getconnector] [CONNECTOR:24:?]
>[   43.489705] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-1]
>[   43.489710] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
>[   43.690247] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-1] disconnected
>[   43.690273] [drm:drm_mode_getconnector] [CONNECTOR:24:?]
>[   43.690280] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-1]
>[   43.690285] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
>[   43.882321] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-1] disconnected
>[   43.882352] [drm:drm_mode_getconnector] [CONNECTOR:26:?]
>[   43.882359] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2]
>[   43.882364] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[   43.979464] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   43.979475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   44.074699] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected
>[   44.074724] [drm:drm_mode_getconnector] [CONNECTOR:26:?]
>[   44.074730] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2]
>[   44.074735] [drm:intel_hdmi_detect] [CONNECTOR:26:HDMI-A-2]
>[   44.171848] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[   44.171859] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   44.267181] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:26:HDMI-A-2] disconnected
>[   44.267272] [drm:add_framebuffer_internal] [FB:34]
>[   44.822148] [drm:add_framebuffer_internal] [FB:34]
>[   44.829894] [drm:drm_mode_setcrtc] [CRTC:8]
>[   44.829909] [drm:drm_mode_setcrtc] [CONNECTOR:28:eDP-1]
>[   44.829916] [drm:intel_crtc_set_config] [CRTC:8] [FB:34] #connectors=1 (x y) (0 0)
>[   44.829925] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=1
>[   44.829931] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
>[   44.829938] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   44.829945] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains
>[   44.829949] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[   44.829957] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 76400KHz
>[   44.829963] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18
>[   44.829968] [drm:intel_dp_compute_config] DP link bw required 137520 available 432000
>[   44.829974] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[   44.829979] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
>[   44.829983] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   44.829987] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[   44.829992] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   44.829998] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2670373, gmch_n: 8388608, link_m: 148354, link_n: 524288, tu: 64
>[   44.830003] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   44.830007] [drm:intel_dump_pipe_config] requested mode:
>[   44.830016] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   44.830019] [drm:intel_dump_pipe_config] adjusted mode:
>[   44.830027] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   44.830033] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9
>[   44.830037] [drm:intel_dump_pipe_config] port clock: 270000
>[   44.830042] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[   44.830046] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   44.830051] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   44.830055] [drm:intel_dump_pipe_config] ips: 0
>[   44.830058] [drm:intel_dump_pipe_config] double wide: 0
>[   44.834057] [drm:i9xx_update_primary_plane] Writing base 005E9000 00000000 0 0 5504
>[   44.841088] [drm:drm_mode_setcrtc] [CRTC:8]
>[   44.841105] [drm:drm_mode_setcrtc] [CONNECTOR:28:eDP-1]
>[   44.841112] [drm:intel_crtc_set_config] [CRTC:8] [FB:34] #connectors=1 (x y) (0 0)
>[   44.841121] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   44.841127] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
>[   44.841133] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   44.841140] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains
>[   44.841145] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[   44.841153] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 76400KHz
>[   44.841159] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18
>[   44.841163] [drm:intel_dp_compute_config] DP link bw required 137520 available 432000
>[   44.841169] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[   44.841174] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
>[   44.841178] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   44.841182] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[   44.841188] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   44.841193] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2670373, gmch_n: 8388608, link_m: 148354, link_n: 524288, tu: 64
>[   44.841199] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   44.841202] [drm:intel_dump_pipe_config] requested mode:
>[   44.841210] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   44.841214] [drm:intel_dump_pipe_config] adjusted mode:
>[   44.841221] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   44.841228] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9
>[   44.841232] [drm:intel_dump_pipe_config] port clock: 270000
>[   44.841236] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[   44.841241] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   44.841245] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   44.841249] [drm:intel_dump_pipe_config] ips: 0
>[   44.841253] [drm:intel_dump_pipe_config] double wide: 0
>[   45.568232] random: nonblocking pool is initialized
>[   46.423002] device-mapper: uevent: version 1.0.3
>[   46.423667] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
>[   47.494239] BTRFS info (device sda7): disk space caching is enabled
>[   48.179040] ACPI: bus type USB registered
>[   48.179096] usbcore: registered new interface driver usbfs
>[   48.179118] usbcore: registered new interface driver hub
>[   48.179172] usbcore: registered new device driver usb
>[   48.276527] wmi: Mapper loaded
>[   48.284727] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=3906/7812
>[   48.285379] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[   48.322933] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258)
>[   48.322947] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   48.326579] thermal LNXTHERM:00: registered as thermal_zone0
>[   48.326586] ACPI: Thermal Zone [TZ01] (27 C)
>[   48.327876] pps_core: LinuxPPS API ver. 1 registered
>[   48.327882] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[   48.353847] input: PC Speaker as /devices/platform/pcspkr/input/input7
>[   48.384392] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[   48.384408] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[   48.384815] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[   48.384844] xhci_hcd 0000:00:14.0: irq 89 for MSI/MSI-X
>[   48.388462] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[   48.388471] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[   48.388474] usb usb1: Product: xHCI Host Controller
>[   48.388477] usb usb1: Manufacturer: Linux 3.18.0-rc4-4-default+ xhci-hcd
>[   48.388480] usb usb1: SerialNumber: 0000:00:14.0
>[   48.388973] hub 1-0:1.0: USB hub found
>[   48.388995] hub 1-0:1.0: 6 ports detected
>[   48.389943] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[   48.389954] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[   48.390058] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[   48.390063] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[   48.390066] usb usb2: Product: xHCI Host Controller
>[   48.390069] usb usb2: Manufacturer: Linux 3.18.0-rc4-4-default+ xhci-hcd
>[   48.390072] usb usb2: SerialNumber: 0000:00:14.0
>[   48.392816] hub 2-0:1.0: USB hub found
>[   48.392837] hub 2-0:1.0: 1 port detected
>[   48.413754] PTP clock support registered
>[   48.428262] tg3.c:v3.137 (May 11, 2014)
>[   48.490062] libphy: tg3 mdio bus: probed
>[   48.490459] iTCO_vendor_support: vendor-support=0
>[   48.492517] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[   48.492586] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
>[   48.492778] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   48.501937] alg: No test for crc32 (crc32-pclmul)
>[   48.562698] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57788) rev 57780001] (PCI Express) MAC address 9c:8e:99:ec:31:ba
>[   48.562706] tg3 0000:02:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01)
>[   48.562711] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>[   48.562715] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>[   48.699551] usb 1-3: new high-speed USB device number 2 using xhci_hcd
>[   48.785018] acer_wmi: Acer Laptop ACPI-WMI Extras
>[   48.789365] acer_wmi: Brightness must be controlled by acpi video driver
>[   48.790431] input: Acer BMA150 accelerometer as /devices/virtual/input/input8
>[   48.803041] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140926/dsopcode-236)
>[   48.803060] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff88013f073ce8), AE_AML_BUFFER_LIMIT (20140926/psparse-536)
>[   48.803088] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff88013f076c70), AE_AML_BUFFER_LIMIT (20140926/psparse-536)
>[   48.803311] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140926/dsopcode-236)
>[   48.803324] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff88013f073ce8), AE_AML_BUFFER_LIMIT (20140926/psparse-536)
>[   48.803349] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff88013f076c70), AE_AML_BUFFER_LIMIT (20140926/psparse-536)
>[   48.803611] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140926/dsopcode-236)
>[   48.803625] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff88013f073ce8), AE_AML_BUFFER_LIMIT (20140926/psparse-536)
>[   48.803650] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff88013f076c70), AE_AML_BUFFER_LIMIT (20140926/psparse-536)
>[   48.803822] input: HP WMI hotkeys as /devices/virtual/input/input9
>[   48.804254] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140926/dsopcode-236)
>[   48.804268] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff88013f073ce8), AE_AML_BUFFER_LIMIT (20140926/psparse-536)
>[   48.804294] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff88013f076c70), AE_AML_BUFFER_LIMIT (20140926/psparse-536)
>[   48.804513] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140926/dsopcode-236)
>[   48.804527] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff88013f073ce8), AE_AML_BUFFER_LIMIT (20140926/psparse-536)
>[   48.804554] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAA] (Node ffff88013f076c70), AE_AML_BUFFER_LIMIT (20140926/psparse-536)
>[   48.832665] usb 1-3: New USB device found, idVendor=0424, idProduct=2412
>[   48.832675] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[   48.833789] hub 1-3:1.0: USB hub found
>[   48.833942] hub 1-3:1.0: 2 ports detected
>[   49.004355] usb 1-4: new high-speed USB device number 3 using xhci_hcd
>[   49.131991] snd_hda_intel 0000:00:1b.0: irq 90 for MSI/MSI-X
>[   49.132752] usb 1-4: New USB device found, idVendor=0424, idProduct=2517
>[   49.132761] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[   49.133668] hub 1-4:1.0: USB hub found
>[   49.133826] hub 1-4:1.0: 7 ports detected
>[   49.204402] usb 1-3.2: new full-speed USB device number 4 using xhci_hcd
>[   49.295471] usb 1-3.2: New USB device found, idVendor=22b9, idProduct=2968
>[   49.295481] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   49.295487] usb 1-3.2: Product: HID Touch Panel
>[   49.295492] usb 1-3.2: Manufacturer: HID TOUCH
>[   49.409244] usb 1-4.3: new low-speed USB device number 5 using xhci_hcd
>[   49.508329] usb 1-4.3: New USB device found, idVendor=046d, idProduct=c050
>[   49.508338] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   49.508343] usb 1-4.3: Product: USB-PS/2 Optical Mouse
>[   49.508347] usb 1-4.3: Manufacturer: Logitech
>[   49.508610] usb 1-4.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[   49.581963] usb 1-4.4: new low-speed USB device number 6 using xhci_hcd
>[   49.627021] sound hdaudioC0D0: autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:line
>[   49.627032] sound hdaudioC0D0:    speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
>[   49.627038] sound hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   49.627043] sound hdaudioC0D0:    mono: mono_out=0x0
>[   49.627048] sound hdaudioC0D0:    inputs:
>[   49.627054] sound hdaudioC0D0:      Line=0x1a
>[   49.689771] usbcore: registered new interface driver usbhid
>[   49.689776] usbhid: USB HID core driver
>[   49.692277] usb 1-4.4: New USB device found, idVendor=0603, idProduct=00f2
>[   49.692291] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   49.692297] usb 1-4.4: Product: USB Keyboard
>[   49.692302] usb 1-4.4: Manufacturer: NOVATEK
>[   49.692668] usb 1-4.4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[   49.692686] usb 1-4.4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
>[   49.716127] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input10
>[   49.719166] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>[   49.720397] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>[   49.720597] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
>[   49.946120] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.3/1-4.3:1.0/0003:046D:C050.0002/input/input14
>[   49.946779] hid-generic 0003:046D:C050.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-4.3/input0
>[   49.947139] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.0/0003:0603:00F2.0003/input/input15
>[   49.948027] hid-generic 0003:0603:00F2.0003: input,hidraw1: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:14.0-4.4/input0
>[   49.949510] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.4/1-4.4:1.1/0003:0603:00F2.0004/input/input16
>[   49.950850] hid-generic 0003:0603:00F2.0004: input,hiddev0,hidraw2: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:14.0-4.4/input1
>[   50.016844] Adding 4192252k swap on /dev/sda1.  Priority:-1 extents:1 across:4192252k FS
>[   52.416370] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
>[   52.471558] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
>[   53.532356] NET: Registered protocol family 17
>[   53.603829] [drm:intel_crtc_set_config] [CRTC:8] [FB:36] #connectors=1 (x y) (0 0)
>[   53.603835] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=1
>[   53.603838] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
>[   53.603841] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   53.603844] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains
>[   53.603845] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[   53.603850] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 76400KHz
>[   53.603852] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18
>[   53.603853] [drm:intel_dp_compute_config] DP link bw required 137520 available 432000
>[   53.603855] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[   53.603857] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
>[   53.603858] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   53.603859] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[   53.603861] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   53.603863] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2670373, gmch_n: 8388608, link_m: 148354, link_n: 524288, tu: 64
>[   53.603864] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   53.603865] [drm:intel_dump_pipe_config] requested mode:
>[   53.603868] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   53.603869] [drm:intel_dump_pipe_config] adjusted mode:
>[   53.603872] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   53.603874] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9
>[   53.603875] [drm:intel_dump_pipe_config] port clock: 270000
>[   53.603876] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[   53.603877] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   53.603878] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   53.603879] [drm:intel_dump_pipe_config] ips: 0
>[   53.603880] [drm:intel_dump_pipe_config] double wide: 0
>[   53.603891] [drm:i9xx_update_primary_plane] Writing base 001E1000 00000000 0 0 5504
>[   53.611842] [drm:intel_crtc_set_config] [CRTC:13] [NOFB]
>[   53.611850] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[   53.611854] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
>[   53.611858] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[   53.611873] [drm:intel_crtc_set_config] [CRTC:8] [FB:36] #connectors=1 (x y) (0 0)
>[   53.611877] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   53.611880] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
>[   53.611883] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   53.611888] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains
>[   53.611890] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[   53.611896] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 76400KHz
>[   53.611899] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18
>[   53.611901] [drm:intel_dp_compute_config] DP link bw required 137520 available 432000
>[   53.611905] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[   53.611908] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
>[   53.611909] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   53.611911] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[   53.611914] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   53.611917] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2670373, gmch_n: 8388608, link_m: 148354, link_n: 524288, tu: 64
>[   53.611920] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   53.611921] [drm:intel_dump_pipe_config] requested mode:
>[   53.611927] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   53.611928] [drm:intel_dump_pipe_config] adjusted mode:
>[   53.611933] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   53.611937] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9
>[   53.611939] [drm:intel_dump_pipe_config] port clock: 270000
>[   53.611941] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[   53.611943] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   53.611945] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   53.611947] [drm:intel_dump_pipe_config] ips: 0
>[   53.611948] [drm:intel_dump_pipe_config] double wide: 0
>[   53.611975] [drm:intel_crtc_set_config] [CRTC:8] [FB:36] #connectors=1 (x y) (0 0)
>[   53.611979] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   53.611982] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
>[   53.611985] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   53.611988] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains
>[   53.611990] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[   53.611993] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 76400KHz
>[   53.611996] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18
>[   53.611998] [drm:intel_dp_compute_config] DP link bw required 137520 available 432000
>[   53.612001] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[   53.612003] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
>[   53.612005] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   53.612006] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[   53.612009] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   53.612013] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2670373, gmch_n: 8388608, link_m: 148354, link_n: 524288, tu: 64
>[   53.612015] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   53.612016] [drm:intel_dump_pipe_config] requested mode:
>[   53.612021] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   53.612023] [drm:intel_dump_pipe_config] adjusted mode:
>[   53.612027] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   53.612032] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9
>[   53.612033] [drm:intel_dump_pipe_config] port clock: 270000
>[   53.612035] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[   53.612037] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   53.612040] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   53.612041] [drm:intel_dump_pipe_config] ips: 0
>[   53.612042] [drm:intel_dump_pipe_config] double wide: 0
>[   53.618663] [drm:intel_crtc_set_config] [CRTC:8] [FB:36] #connectors=1 (x y) (0 0)
>[   53.618666] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   53.618667] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
>[   53.618669] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   53.618671] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains
>[   53.618672] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[   53.618675] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 76400KHz
>[   53.618676] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18
>[   53.618678] [drm:intel_dp_compute_config] DP link bw required 137520 available 432000
>[   53.618679] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[   53.618680] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
>[   53.618681] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   53.618682] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[   53.618684] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   53.618686] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2670373, gmch_n: 8388608, link_m: 148354, link_n: 524288, tu: 64
>[   53.618687] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   53.618688] [drm:intel_dump_pipe_config] requested mode:
>[   53.618691] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   53.618692] [drm:intel_dump_pipe_config] adjusted mode:
>[   53.618694] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   53.618697] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9
>[   53.618698] [drm:intel_dump_pipe_config] port clock: 270000
>[   53.618699] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[   53.618700] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   53.618701] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   53.618702] [drm:intel_dump_pipe_config] ips: 0
>[   53.618703] [drm:intel_dump_pipe_config] double wide: 0
>[   53.652749] [drm:intel_crtc_set_config] [CRTC:8] [FB:36] #connectors=1 (x y) (0 0)
>[   53.652760] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
>[   53.652765] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
>[   53.652770] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   53.652775] [drm:connected_sink_compute_bpp] [CONNECTOR:28:eDP-1] checking for sink bpp constrains
>[   53.652778] [drm:connected_sink_compute_bpp] clamping display bpp (was 24) to EDID reported max of 18
>[   53.652783] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 0a pixel clock 76400KHz
>[   53.652787] [drm:intel_dp_compute_config] DP link bw 0a lane count 2 clock 270000 bpp 18
>[   53.652789] [drm:intel_dp_compute_config] DP link bw required 137520 available 432000
>[   53.652793] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
>[   53.652796] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
>[   53.652799] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   53.652801] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[   53.652804] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   53.652807] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 2670373, gmch_n: 8388608, link_m: 148354, link_n: 524288, tu: 64
>[   53.652810] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   53.652812] [drm:intel_dump_pipe_config] requested mode:
>[   53.652817] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   53.652819] [drm:intel_dump_pipe_config] adjusted mode:
>[   53.652823] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[   53.652827] [drm:intel_dump_crtc_timings] crtc timings: 76400 1366 1402 1450 1610 768 771 776 790, type: 0x48 flags: 0x9
>[   53.652829] [drm:intel_dump_pipe_config] port clock: 270000
>[   53.652831] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[   53.652834] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   53.652836] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   53.652838] [drm:intel_dump_pipe_config] ips: 0
>[   53.652841] [drm:intel_dump_pipe_config] double wide: 0
>[   53.652845] [drm:intel_crtc_set_config] [CRTC:13] [NOFB]
>[   53.652848] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:13], mode_changed=0, fb_changed=0
>[   53.652851] [drm:intel_modeset_stage_output_state] [CONNECTOR:28:eDP-1] to [CRTC:8]
>[   53.652854] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[   53.722398] No iBFT detected.
>[   53.767876] tg3 0000:02:00.0: irq 91 for MSI/MSI-X
>[   53.778945] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   54.575892] tg3 0000:02:00.0 eth0: Link is down
>[   57.589727] tg3 0000:02:00.0 eth0: Link is up at 1000 Mbps, full duplex
>[   57.589734] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
>[   57.589746] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[   89.862299] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 0
>[   89.862519] [drm:intel_dp_hpd_pulse] got hpd irq on port B - long
>[   90.533308] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00
>[   90.917987] [drm:intel_dp_probe_oui] Sink OUI: 4ce000
>[   91.302716] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[   91.398918] [drm:i915_hotplug_work_func] running encoder hotplug functions
>[   91.398931] [drm:i915_hotplug_work_func] Connector HDMI-A-1 (pin 4) received hotplug event.
>[   91.398936] [drm:i915_hotplug_work_func] Connector DP-1 (pin 4) received hotplug event.
>[   91.398942] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
>[   91.495496] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[   91.495506] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   91.591287] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
>[   92.072224] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00
>[   92.456982] [drm:intel_dp_probe_oui] Sink OUI: 4ce000
>[   92.841754] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[  119.181105] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 39
>[  119.181112] Raw EDID:
>[  119.181117]  	00 ff ff ff ff ff ff 00 ac 48 d0 4c 4e 5a 31 1b
>[  119.181120]  	15 01 04 a5 30 1b 78 3a 7c a5 a3 54 4e a0 27 12
>[  119.181124]  	50 54 a5 4b 00 4f 81 80 d1 c0 01 01 01 01 01 01
>[  119.181127]  	01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c 45 00
>[  119.181131]  	db 0b 11 00 1e 00 00 00 ff 00 59 39 4b 43 48 31
>[  119.181134]  	37 38 31 5a 4e 4c 0a 00 00 00 fc 00 44 45 4c 4c
>[  119.181137]  	20 32 32 31 32 48 4d 0a 00 00 00 fd 00 38 4c 1e
>[  119.181141]  	53 11 00 0a 20 20 20 20 20 20 00 44 00 ff ff ff
>[  144.566588] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 179
>[  144.566595] Raw EDID:
>[  144.566600]  	00 ff ff ff ff ff ff 00 10 ac 48 d0 4c 4e 5a 31
>[  144.566603]  	1b 15 01 04 a5 30 1b 78 3a a5 a3 54 4e a0 27 12
>[  144.566607]  	50 54 a5 4b 00 71 4f 81 80 d1 c0 01 01 01 01 01
>[  144.566610]  	01 01 01 01 01 02 3a 18 71 38 2d 40 58 2c 45 00
>[  144.566614]  	db 0b 11 00 00 1e 00 00 00 ff 00 59 39 4b 43 48
>[  144.566617]  	31 37 38 31 5a 4c 0a 00 00 00 fc 00 44 45 4c 4c
>[  144.566620]  	20 55 32 32 31 32 48 4d 0a 00 00 00 fd 00 38 4c
>[  144.566624]  	1e 53 11 0a 20 20 20 20 20 20 00 44 00 ff ff ff
>[  169.960140] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 98
>[  169.960147] Raw EDID:
>[  169.960153]  	00 ff ff ff ff ff ff 00 10 ac 48 d0 4c 5a 31 1b
>[  169.960156]  	15 01 04 a5 30 1b 78 3a 7c a5 a3 54 4e a0 27 12
>[  169.960160]  	50 54 a5 4b 00 71 4f 81 80 d1 c0 01 01 01 01 01
>[  169.960164]  	01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c 45 00
>[  169.960167]  	db 0b 11 00 00 1e 00 00 00 00 59 39 4b 43 48 31
>[  169.960171]  	37 38 31 5a 4e 4c 0a 00 00 00 fc 00 44 45 4c 4c
>[  169.960175]  	20 55 32 32 31 32 48 0a 00 00 00 fd 00 38 4c 1e
>[  169.960178]  	53 11 00 0a 20 20 20 20 20 20 00 44 00 ff ff ff
>[  195.341537] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 142
>[  195.341544] Raw EDID:
>[  195.341550]  	00 ff ff ff ff ff ff 00 ac 48 d0 4c 4e 5a 31 1b
>[  195.341553]  	15 01 04 a5 30 1b 78 3a 7c a5 a3 54 4e a0 27 50
>[  195.341557]  	54 a5 4b 00 71 4f 81 80 d1 c0 01 01 01 01 01 01
>[  195.341561]  	01 01 01 01 02 3a 80 18 71 38 2d 40 58 45 00 db
>[  195.341564]  	0b 11 00 00 1e 00 00 00 ff 00 59 39 4b 43 48 31
>[  195.341568]  	37 38 31 5a 4e 4c 0a 00 00 00 fc 44 45 4c 4c 20
>[  195.341572]  	55 32 32 31 32 48 4d 0a 00 00 00 fd 00 38 4c 1e
>[  195.341575]  	53 11 00 0a 20 20 20 20 20 00 44 00 ff ff ff ff
>[  195.341583] i915 0000:00:02.0: DP-1: EDID block 0 invalid.
>[  195.437712] [drm:intel_hpd_irq_event] [CONNECTOR:24:DP-1] status updated from disconnected to connected
>[  195.437772] [drm:drm_fb_helper_hotplug_event] 
>[  195.437779] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:eDP-1]
>[  195.437784] [drm:intel_dp_detect] [CONNECTOR:28:eDP-1]
>[  195.726246] [drm:edp_panel_vdd_on] Turning eDP port C VDD on
>[  195.726266] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  196.014800] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[  196.399545] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[  196.495765] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[  196.495779] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:28:eDP-1] probed modes :
>[  196.495788] [drm:drm_mode_debug_printmodeline] Modeline 29:"1366x768" 60 76400 1366 1402 1450 1610 768 771 776 790 0x48 0x9
>[  196.495796] [drm:drm_mode_debug_printmodeline] Modeline 30:"1366x768" 40 50930 1366 1402 1450 1610 768 771 776 790 0x40 0x9
>[  196.495802] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1]
>[  196.495808] [drm:intel_crt_detect] [CONNECTOR:16:VGA-1] force=1
>[  196.527811] [drm:valleyview_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40018
>[  196.535804] [drm:valleyview_crt_detect_hotplug] valleyview hotplug adpa=0xf40018, result 0
>[  196.535813] [drm:intel_crt_detect] CRT not detected via hotplug
>[  196.551499] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[  196.551505] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[  196.584136] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:16:VGA-1] disconnected
>[  196.584148] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1]
>[  196.584153] [drm:intel_hdmi_detect] [CONNECTOR:19:HDMI-A-1]
>[  196.680430] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
>[  196.680440] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[  196.776279] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:19:HDMI-A-1] disconnected
>[  196.776290] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:24:DP-1]
>[  196.776296] [drm:intel_dp_detect] [CONNECTOR:24:DP-1]
>[  197.257219] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00
>[  197.641981] [drm:intel_dp_probe_oui] Sink OUI: 4ce000
>[  198.026724] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[  198.988601] [drm:edp_panel_vdd_off_sync] Turning eDP port C VDD off
>[  198.988614] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  224.638856] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 98
>[  224.638863] Raw EDID:
>[  224.638868]  	00 ff ff ff ff ff ff 00 10 ac 48 d0 4c 4e 5a 31
>[  224.638872]  	1b 15 01 04 a5 30 1b 78 3a 7c a5 a3 54 a0 27 12
>[  224.638876]  	50 54 a5 4b 00 71 4f 81 80 d1 c0 01 01 01 01 01
>[  224.638879]  	01 01 01 01 01 02 3a 80 18 71 38 40 58 2c 45 00
>[  224.638883]  	db 0b 11 00 00 1e 00 00 00 ff 00 59 39 4b 43 48
>[  224.638887]  	31 37 38 31 5a 4e 4c 0a 00 00 fc 00 44 45 4c 4c
>[  224.638890]  	20 55 32 32 31 32 48 4d 0a 00 00 00 fd 00 38 4c
>[  224.638894]  	1e 53 11 00 0a 20 20 20 20 20 00 44 00 ff ff ff
>[  250.016069] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 88
>[  250.016076] Raw EDID:
>[  250.016081]  	00 ff ff ff ff ff ff 00 10 ac 48 d0 4c 4e 5a 31
>[  250.016085]  	1b 01 04 a5 30 1b 78 3a 7c a5 a3 54 4e a0 27 12
>[  250.016089]  	50 54 a5 4b 00 71 4f 81 80 d1 c0 01 01 01 01 01
>[  250.016092]  	01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c 45 00
>[  250.016096]  	db 0b 11 00 00 1e 00 00 00 ff 00 59 39 43 48 31
>[  250.016100]  	37 38 31 5a 4e 4c 0a 00 00 00 fc 00 44 45 4c 4c
>[  250.016103]  	20 55 32 32 31 32 48 4d 0a 00 00 00 fd 00 38 4c
>[  250.016107]  	1e 53 11 00 0a 20 20 20 20 20 20 00 00 ff ff ff

Actions: View

Attachments on bug 86202: 109342

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.