Attachment 110244 Details for Bug 86864 – lspci verbose output

lspci verbose output

lspci-verbose.txt (text/plain), 33.34 KB, created by Shawn Starr on 2014-11-30 00:13:31 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Shawn Starr

Created: 2014-11-30 00:13:31 UTC

Size: 33.34 KB

patch

obsolete

>00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
>	Subsystem: Lenovo Device [17aa:20e0]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information: Len=0a <?>
>
>00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 24
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 00002000-00002fff
>	Memory behind bridge: cff00000-cfffffff
>	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [88] Subsystem: Lenovo Device [17aa:20e2]
>	Capabilities: [80] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0300c  Data: 41d1
>	Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
>			ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise-
>			Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg-
>			Control: AttnInd Off, PwrInd On, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed+ WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>			Status:	NegoPending- InProgress-
>	Capabilities: [140 v1] Root Complex Link
>		Desc:	PortNumber=02 ComponentID=01 EltType=Config
>		Link0:	Desc:	TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
>			Addr:	00000000fed19000
>	Kernel driver in use: pcieport
>	Kernel modules: shpchp
>
>00:03.0 Communication controller [0780]: Intel Corporation Mobile 4 Series Chipset MEI Controller [8086:2a44] (rev 07)
>	Subsystem: Lenovo Device [17aa:20e6]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 31
>	Region 0: Memory at fc226800 (64-bit, non-prefetchable) [size=16]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee0300c  Data: 4123
>	Kernel driver in use: mei_me
>	Kernel modules: mei_me
>
>00:03.2 IDE interface [0101]: Intel Corporation Mobile 4 Series Chipset PT IDER Controller [8086:2a46] (rev 07) (prog-if 85 [Master SecO PriO])
>	Subsystem: Lenovo Device [17aa:20ea]
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 18
>	Region 0: I/O ports at 1820 [size=8]
>	Region 1: I/O ports at 1814 [size=4]
>	Region 2: I/O ports at 1818 [size=8]
>	Region 3: I/O ports at 1810 [size=4]
>	Region 4: I/O ports at 1800 [size=16]
>	Capabilities: [c8] Power Management version 3
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
>		Address: 0000000000000000  Data: 0000
>	Kernel driver in use: ata_generic
>	Kernel modules: pata_acpi, ata_generic
>
>00:03.3 Serial controller [0700]: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection [8086:2a47] (rev 07) (prog-if 02 [16550])
>	Subsystem: Lenovo Device [17aa:20ec]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 17
>	Region 0: I/O ports at 1828 [size=8]
>	Region 1: Memory at fc224000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [c8] Power Management version 3
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
>		Address: 0000000000000000  Data: 0000
>	Kernel driver in use: serial
>
>00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
>	Subsystem: Lenovo Device [17aa:20ee]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 29
>	Region 0: Memory at fc200000 (32-bit, non-prefetchable) [size=128K]
>	Region 1: Memory at fc225000 (32-bit, non-prefetchable) [size=4K]
>	Region 2: I/O ports at 1840 [size=32]
>	Capabilities: [c8] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee0200c  Data: 4173
>	Capabilities: [e0] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>	Kernel driver in use: e1000e
>	Kernel modules: e1000e
>
>00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
>	Subsystem: Lenovo Device [17aa:20f0]
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 20
>	Region 4: I/O ports at 1860 [size=32]
>	Capabilities: [50] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>	Kernel driver in use: uhci_hcd
>
>00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
>	Subsystem: Lenovo Device [17aa:20f0]
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 21
>	Region 4: I/O ports at 1880 [size=32]
>	Capabilities: [50] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>	Kernel driver in use: uhci_hcd
>
>00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
>	Subsystem: Lenovo Device [17aa:20f0]
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 22
>	Region 4: I/O ports at 18a0 [size=32]
>	Capabilities: [50] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>	Kernel driver in use: uhci_hcd
>
>00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
>	Subsystem: Lenovo Device [17aa:20f1]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 23
>	Region 0: Memory at fc226c00 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Capabilities: [98] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>	Kernel driver in use: ehci-pci
>
>00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
>	Subsystem: Lenovo Device [17aa:20f2]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 33
>	Region 0: Memory at fc220000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee0300c  Data: 4153
>	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed- WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>			Status:	NegoPending- InProgress-
>		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable- ID=0 ArbSelect=Fixed TC/VC=00
>			Status:	NegoPending- InProgress-
>	Capabilities: [130 v1] Root Complex Link
>		Desc:	PortNumber=0f ComponentID=02 EltType=Config
>		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
>			Addr:	00000000fed1c000
>	Kernel driver in use: snd_hda_intel
>	Kernel modules: snd_hda_intel
>
>00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 25
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	I/O behind bridge: 00003000-00003fff
>	Memory behind bridge: c0000000-c01fffff
>	Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
>			ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
>			Slot #0, PowerLimit 6.500W; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg+
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0300c  Data: 4122
>	Capabilities: [90] Subsystem: Lenovo Device [17aa:20f3]
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed+ WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>			Status:	NegoPending- InProgress-
>	Capabilities: [180 v1] Root Complex Link
>		Desc:	PortNumber=01 ComponentID=02 EltType=Config
>		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
>			Addr:	00000000fed1c000
>	Kernel driver in use: pcieport
>	Kernel modules: shpchp
>
>00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 26
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>	I/O behind bridge: 00009000-00009fff
>	Memory behind bridge: f4200000-f42fffff
>	Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
>			ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
>			Slot #1, PowerLimit 6.500W; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg+
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0300c  Data: 4152
>	Capabilities: [90] Subsystem: Lenovo Device [17aa:20f3]
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed+ WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>			Status:	NegoPending- InProgress-
>	Capabilities: [180 v1] Root Complex Link
>		Desc:	PortNumber=02 ComponentID=02 EltType=Config
>		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
>			Addr:	00000000fed1c000
>	Kernel driver in use: pcieport
>	Kernel modules: shpchp
>
>00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 27
>	Bus: primary=00, secondary=0d, subordinate=14, sec-latency=0
>	I/O behind bridge: 00004000-00004fff
>	Memory behind bridge: fa000000-fbffffff
>	Prefetchable memory behind bridge: 00000000f4100000-00000000f41fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
>			ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
>			Slot #4, PowerLimit 6.500W; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg+
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0300c  Data: 4162
>	Capabilities: [90] Subsystem: Lenovo Device [17aa:20f3]
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed+ WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>			Status:	NegoPending- InProgress-
>	Capabilities: [180 v1] Root Complex Link
>		Desc:	PortNumber=05 ComponentID=02 EltType=Config
>		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
>			Addr:	00000000fed1c000
>	Kernel driver in use: pcieport
>	Kernel modules: shpchp
>
>00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
>	Subsystem: Lenovo Device [17aa:20f0]
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 4: I/O ports at 18c0 [size=32]
>	Capabilities: [50] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>	Kernel driver in use: uhci_hcd
>
>00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
>	Subsystem: Lenovo Device [17aa:20f0]
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 17
>	Region 4: I/O ports at 18e0 [size=32]
>	Capabilities: [50] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>	Kernel driver in use: uhci_hcd
>
>00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
>	Subsystem: Lenovo Device [17aa:20f0]
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 18
>	Region 4: I/O ports at 1c00 [size=32]
>	Capabilities: [50] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>	Kernel driver in use: uhci_hcd
>
>00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
>	Subsystem: Lenovo Device [17aa:20f1]
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 19
>	Region 0: Memory at fc227000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Capabilities: [98] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>	Kernel driver in use: ehci-pci
>
>00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
>	I/O behind bridge: 00005000-00008fff
>	Memory behind bridge: f4300000-f7ffffff
>	Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Subsystem: Lenovo Device [17aa:20f4]
>
>00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
>	Subsystem: Lenovo Device [17aa:20f5]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
>	Kernel driver in use: lpc_ich
>	Kernel modules: lpc_ich
>
>00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
>	Subsystem: Lenovo Device [17aa:20f8]
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 28
>	Region 0: I/O ports at 1c40 [size=8]
>	Region 1: I/O ports at 1834 [size=4]
>	Region 2: I/O ports at 1838 [size=8]
>	Region 3: I/O ports at 1830 [size=4]
>	Region 4: I/O ports at 1c20 [size=32]
>	Region 5: Memory at fc226000 (32-bit, non-prefetchable) [size=2K]
>	Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
>		Address: fee0100c  Data: 4182
>	Capabilities: [70] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
>	Capabilities: [b0] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>	Kernel driver in use: ahci
>
>00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
>	Subsystem: Lenovo Device [17aa:20f9]
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin A routed to IRQ 23
>	Region 0: Memory at fc227400 (64-bit, non-prefetchable) [size=256]
>	Region 4: I/O ports at 1c60 [size=32]
>	Kernel driver in use: i801_smbus
>	Kernel modules: i2c_i801
>
>01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV635/M86 [Mobility Radeon HD 3650] [1002:9591] (prog-if 00 [VGA controller])
>	Subsystem: Lenovo Device [17aa:2127]
>	Physical Slot: 1-1
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 30
>	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
>	Region 1: I/O ports at 2000 [size=256]
>	Region 2: Memory at cfff0000 (32-bit, non-prefetchable) [size=64K]
>	[virtual] Expansion ROM at cff00000 [disabled] [size=128K]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
>			ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
>		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
>			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee0100c  Data: 41e2
>	Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
>	Kernel driver in use: radeon
>	Kernel modules: radeon
>
>03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237]
>	Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211]
>	Physical Slot: 1-2
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 32
>	Region 0: Memory at f4200000 (64-bit, non-prefetchable) [size=8K]
>	Capabilities: [c8] Power Management version 3
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee0300c  Data: 4143
>	Capabilities: [e0] Express (v1) Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
>			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <128ns, L1 <32us
>			ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [100 v1] Advanced Error Reporting
>		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
>	Capabilities: [140 v1] Device Serial Number 00-22-fa-ff-ff-c8-53-ce
>	Kernel driver in use: iwlwifi
>	Kernel modules: iwlwifi
>
>15:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
>	Subsystem: Lenovo ThinkPad R61 [17aa:20c6]
>	Physical Slot: 1
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 6
>	Region 0: Memory at f4300000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
>	Memory window 0: f0000000-f3ffffff (prefetchable)
>	Memory window 1: c4000000-c7ffffff
>	I/O window 0: 00005000-000050ff
>	I/O window 1: 00005400-000054ff
>	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
>	16-bit legacy interface ports at 0001
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
>		Bridge: PM- B3+
>	Kernel modules: yenta_socket
>
>15:00.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21)
>	Subsystem: Lenovo ThinkPad W500 [17aa:20c8]
>	Physical Slot: 1
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin C routed to IRQ 18
>	Region 0: Memory at f4301000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
>	Kernel driver in use: sdhci-pci
>	Kernel modules: sdhci_pci
>
>15:00.4 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 11)
>	Subsystem: Lenovo ThinkPad T61 [17aa:20ca]
>	Physical Slot: 1
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin C routed to IRQ 18
>	Region 0: Memory at f4301800 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
>	Kernel driver in use: r592
>	Kernel modules: r592
>
>15:00.5 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 11)
>	Subsystem: Lenovo Device [17aa:20cb]
>	Physical Slot: 1
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin C routed to IRQ 7
>	Region 0: Memory at f4301c00 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
>

Actions: View

Attachments on bug 86864: 110244 | 110248 | 110280

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.