Attachment 111243 Details for Bug 87625 – dmesg

dmesg

dmesg (text/plain), 46.09 KB, created by Luke-Jr on 2014-12-23 21:13:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Luke-Jr

Created: 2014-12-23 21:13:04 UTC

Size: 46.09 KB

patch

obsolete

>[    0.218315] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.220387] Switched to clocksource hpet
>[    0.225679] pnp: PnP ACPI init
>[    0.225771] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
>[    0.225820] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.225918] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.225967] system 00:01: [io  0xffff] has been reserved
>[    0.226015] system 00:01: [io  0xffff] has been reserved
>[    0.226062] system 00:01: [io  0xffff] has been reserved
>[    0.226110] system 00:01: [io  0x1c00-0x1cfe] has been reserved
>[    0.226158] system 00:01: [io  0x1d00-0x1dfe] has been reserved
>[    0.226206] system 00:01: [io  0x1e00-0x1efe] has been reserved
>[    0.226254] system 00:01: [io  0x1f00-0x1ffe] has been reserved
>[    0.226303] system 00:01: [io  0x1800-0x18fe] could not be reserved
>[    0.226352] system 00:01: [io  0x164e-0x164f] has been reserved
>[    0.226406] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.226425] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.226456] system 00:03: [io  0x1854-0x1857] has been reserved
>[    0.226505] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.226552] system 00:04: [io  0x0290-0x029f] has been reserved
>[    0.226601] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.226729] system 00:05: [io  0x04d0-0x04d1] has been reserved
>[    0.226779] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.226876] pnp 00:06: [dma 0 disabled]
>[    0.226901] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.227166] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.227215] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.227263] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.227312] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.227360] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.227413] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.227462] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
>[    0.227511] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.227560] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
>[    0.227609] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    0.227657] system 00:07: [mem 0xf7fef000-0xf7feffff] has been reserved
>[    0.227706] system 00:07: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
>[    0.227755] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.227914] pnp: PnP ACPI: found 8 devices
>[    0.234194] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.234242] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>[    0.234292] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf00fffff]
>[    0.234342] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.234396] pci 0000:00:1c.2: PCI bridge to [bus 03]
>[    0.234447] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
>[    0.234497] pci 0000:00:1c.2:   bridge window [mem 0xf0900000-0xf09fffff]
>[    0.234551] pci 0000:04:00.0: PCI bridge to [bus 05]
>[    0.234599] pci 0000:04:00.0:   bridge window [io  0xc000-0xcfff]
>[    0.234652] pci 0000:04:00.0:   bridge window [mem 0xf0800000-0xf08fffff]
>[    0.234710] pci 0000:00:1c.6: PCI bridge to [bus 04-05]
>[    0.234760] pci 0000:00:1c.6:   bridge window [io  0xc000-0xcfff]
>[    0.234810] pci 0000:00:1c.6:   bridge window [mem 0xf0800000-0xf08fffff]
>[    0.234864] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.234865] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.234866] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.234867] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
>[    0.234868] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
>[    0.234868] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
>[    0.234869] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
>[    0.234870] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
>[    0.234871] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
>[    0.234871] pci_bus 0000:00: resource 13 [mem 0xcfa00000-0xfeafffff]
>[    0.234872] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>[    0.234873] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xf00fffff]
>[    0.234874] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
>[    0.234875] pci_bus 0000:03: resource 1 [mem 0xf0900000-0xf09fffff]
>[    0.234876] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
>[    0.234876] pci_bus 0000:04: resource 1 [mem 0xf0800000-0xf08fffff]
>[    0.234877] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
>[    0.234878] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
>[    0.234879] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.234879] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
>[    0.234880] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
>[    0.234881] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
>[    0.234882] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
>[    0.234883] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]
>[    0.234883] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]
>[    0.234884] pci_bus 0000:04: resource 13 [mem 0xcfa00000-0xfeafffff]
>[    0.234885] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
>[    0.234886] pci_bus 0000:05: resource 1 [mem 0xf0800000-0xf08fffff]
>[    0.234886] pci_bus 0000:05: resource 4 [io  0xc000-0xcfff]
>[    0.234887] pci_bus 0000:05: resource 5 [mem 0xf0800000-0xf08fffff]
>[    0.234888] pci_bus 0000:05: resource 6 [io  0x0000-0x0cf7]
>[    0.234889] pci_bus 0000:05: resource 7 [io  0x0d00-0xffff]
>[    0.234889] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff]
>[    0.234890] pci_bus 0000:05: resource 9 [mem 0x000d0000-0x000d3fff]
>[    0.234891] pci_bus 0000:05: resource 10 [mem 0x000d4000-0x000d7fff]
>[    0.234892] pci_bus 0000:05: resource 11 [mem 0x000d8000-0x000dbfff]
>[    0.234892] pci_bus 0000:05: resource 12 [mem 0x000dc000-0x000dffff]
>[    0.234893] pci_bus 0000:05: resource 13 [mem 0x000e0000-0x000e3fff]
>[    0.234894] pci_bus 0000:05: resource 14 [mem 0x000e4000-0x000e7fff]
>[    0.234895] pci_bus 0000:05: resource 15 [mem 0xcfa00000-0xfeafffff]
>[    0.234934] NET: Registered protocol family 2
>[    0.235105] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.235245] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.235390] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.235451] TCP: reno registered
>[    0.235497] UDP hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.235572] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.235684] NET: Registered protocol family 1
>[    0.265525] pci 0000:01:00.0: Video device with shadowed ROM
>[    0.265534] PCI: CLS 64 bytes, default 64
>[    0.265570] DMAR: No ATSR found
>[    0.265632] IOMMU 0 0xfed90000: using Queued invalidation
>[    0.265680] IOMMU 1 0xfed91000: using Queued invalidation
>[    0.265728] IOMMU: Setting RMRR:
>[    0.265782] IOMMU: Setting identity map for device 0000:00:02.0 [0xcb800000 - 0xcf9fffff]
>[    0.266163] IOMMU: Setting identity map for device 0000:00:14.0 [0xc80db000 - 0xc80e7fff]
>[    0.266234] IOMMU: Setting identity map for device 0000:00:1a.0 [0xc80db000 - 0xc80e7fff]
>[    0.266300] IOMMU: Setting identity map for device 0000:00:1d.0 [0xc80db000 - 0xc80e7fff]
>[    0.266362] IOMMU: Prepare 0-16MiB unity mapping for LPC
>[    0.266415] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
>[    0.266582] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
>[    0.268252] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
>[    0.268564] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.268644] audit: initializing netlink subsys (disabled)
>[    0.268699] audit: type=2000 audit(1419147484.251:1): initialized
>[    0.269000] VFS: Disk quotas dquot_6.5.2
>[    0.269064] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.269273] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>[    0.269325] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
>[    0.269388] msgmni has been set to 31958
>[    0.269604] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>[    0.269688] io scheduler noop registered
>[    0.269747] io scheduler bfq registered (default)
>[    0.269794] BFQ I/O-scheduler version: v7r6
>[    0.269923] pcieport 0000:00:01.0: irq 26 for MSI/MSI-X
>[    0.270153] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.270211] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.277999] Non-volatile memory driver v1.3
>[    0.280095] Linux agpgart interface v0.103
>[    0.280175] intel_idle: MWAIT substates: 0x42120
>[    0.280176] intel_idle: v0.4 model 0x3C
>[    0.280176] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.280583] GHES: HEST is not enabled!
>[    0.281438] brd: module loaded
>[    0.281707] loop: module loaded
>[    0.281775] ahci 0000:00:1f.2: version 3.0
>[    0.281847] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
>[    0.281888] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
>[    0.281938] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
>[    0.291873] scsi host0: ahci
>[    0.292016] scsi host1: ahci
>[    0.292133] scsi host2: ahci
>[    0.292248] scsi host3: ahci
>[    0.292362] scsi host4: ahci
>[    0.292478] scsi host5: ahci
>[    0.292558] ata1: SATA max UDMA/133 abar m2048@0xf0a3a000 port 0xf0a3a100 irq 27
>[    0.292609] ata2: SATA max UDMA/133 abar m2048@0xf0a3a000 port 0xf0a3a180 irq 27
>[    0.292659] ata3: SATA max UDMA/133 abar m2048@0xf0a3a000 port 0xf0a3a200 irq 27
>[    0.292709] ata4: SATA max UDMA/133 abar m2048@0xf0a3a000 port 0xf0a3a280 irq 27
>[    0.292758] ata5: SATA max UDMA/133 abar m2048@0xf0a3a000 port 0xf0a3a300 irq 27
>[    0.292809] ata6: SATA max UDMA/133 abar m2048@0xf0a3a000 port 0xf0a3a380 irq 27
>[    0.292942] ahci 0000:03:00.0: irq 28 for MSI/MSI-X
>[    0.292957] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
>[    0.293051] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
>[    0.293119] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs 
>[    0.293379] scsi host6: ahci
>[    0.293498] scsi host7: ahci
>[    0.293576] ata7: SATA max UDMA/133 abar m512@0xf0900000 port 0xf0900100 irq 28
>[    0.293626] ata8: SATA max UDMA/133 abar m512@0xf0900000 port 0xf0900180 irq 28
>[    0.293723] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    0.296346] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.296402] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    0.296571] mousedev: PS/2 mouse device common for all mice
>[    0.296632] Intel P-state driver initializing.
>[    0.296955] intel_rapl: Found RAPL domain package
>[    0.297005] intel_rapl: Found RAPL domain core
>[    0.297054] intel_rapl: Found RAPL domain uncore
>[    0.297103] intel_rapl: Found RAPL domain dram
>[    0.297338] TCP: cubic registered
>[    0.297386] NET: Registered protocol family 17
>[    0.297440] Key type dns_resolver registered
>[    0.297781] registered taskstats version 1
>[    0.298278] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>[    0.298388] PM: Checking hibernation image partition /dev/hdd1
>[    0.598026] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    0.598092] ata1: SATA link down (SStatus 0 SControl 300)
>[    0.598158] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    0.598224] ata4: SATA link down (SStatus 0 SControl 300)
>[    0.598289] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    0.598350] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    0.598978] ata7: SATA link down (SStatus 0 SControl 300)
>[    0.599096] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>[    0.599098] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[    0.599148] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    0.599501] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>[    0.599503] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[    0.599554] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    0.599784] ata3.00: ATA-9: WDC WD20EZRX-00D8PB0, 80.00A80, max UDMA/133
>[    0.599834] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    0.600633] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>[    0.600635] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[    0.600690] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    0.601061] ata5.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133
>[    0.601118] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    0.601388] ata3.00: configured for UDMA/133
>[    0.602642] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>[    0.602644] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[    0.602696] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    0.604109] ata5.00: configured for UDMA/133
>[    0.604620] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>[    0.604622] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[    0.604672] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    0.610302] ata2.00: ATA-8: KINGSTON SKC300S37A480G, 507KC4, max UDMA/133
>[    0.610353] ata2.00: 937703088 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    0.611227] ata6.00: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
>[    0.611279] ata6.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    0.617989] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
>[    0.617991] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
>[    0.618043] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
>[    0.620316] ata2.00: configured for UDMA/133
>[    0.620549] scsi 1:0:0:0: Direct-Access     ATA      KINGSTON SKC300S C4   PQ: 0 ANSI: 5
>[    0.620887] sd 1:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
>[    0.620994] scsi 2:0:0:0: Direct-Access     ATA      WDC WD20EZRX-00D 0A80 PQ: 0 ANSI: 5
>[    0.621146] sd 1:0:0:0: [sda] Write Protect is off
>[    0.621208] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    0.621253] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    0.621296] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>[    0.621297] sd 2:0:0:0: [sdb] 4096-byte physical blocks
>[    0.621416] scsi 4:0:0:0: Direct-Access     ATA      Hitachi HDS5C302 A580 PQ: 0 ANSI: 5
>[    0.621468] sd 2:0:0:0: [sdb] Write Protect is off
>[    0.621469] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    0.621516] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    0.621633] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
>[    0.621787] sd 4:0:0:0: [sdc] Write Protect is off
>[    0.621847] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>[    0.621870] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    0.622002]  sda: sda1
>[    0.622293] sd 1:0:0:0: [sda] Attached SCSI disk
>[    0.624532] ata6.00: configured for UDMA/133
>[    0.624700] scsi 5:0:0:0: Direct-Access     ATA      SAMSUNG HD753LJ  1113 PQ: 0 ANSI: 5
>[    0.624960] sd 5:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
>[    0.625252] sd 5:0:0:0: [sdd] Write Protect is off
>[    0.625322] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>[    0.625394] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    0.640092]  sdb: sdb1 sdb2
>[    0.640861] sd 2:0:0:0: [sdb] Attached SCSI disk
>[    0.645868]  sdd: sdd1 sdd2 sdd3
>[    0.646566] sd 5:0:0:0: [sdd] Attached SCSI disk
>[    0.647932]  sdc: sdc1 sdc2 sdc3
>[    0.648662] sd 4:0:0:0: [sdc] Attached SCSI disk
>[    0.930507] ata8: SATA link down (SStatus 0 SControl 300)
>[    0.930661] PM: Hibernation image not present or could not be loaded.
>[    0.932471] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
>[    0.932634] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
>[    0.938801] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[    0.938854] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
>[    0.939757] devtmpfs: mounted
>[    0.940136] Freeing unused kernel memory: 888K (ffffffff81891000 - ffffffff8196f000)
>[    0.940186] Write protecting the kernel read-only data: 8192k
>[    0.941561] Freeing unused kernel memory: 1008K (ffff880001504000 - ffff880001600000)
>[    0.942157] Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000)
>[    1.271948] tsc: Refined TSC clocksource calibration: 3499.995 MHz
>[    1.346831] systemd-udevd[339]: starting version 216
>[    1.353028] random: systemd-udevd urandom read with 42 bits of entropy available
>[    1.378270] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>[    1.378274] ACPI: Power Button [PWRB]
>[    1.378320] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>[    1.378322] ACPI: Power Button [PWRF]
>[    1.384192] pps_core: LinuxPPS API ver. 1 registered
>[    1.384193] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    1.385605] PTP clock support registered
>[    1.386727] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    1.389546] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>[    1.404333] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    1.404334] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    1.407588] 8139too: 8139too Fast Ethernet driver 0.9.28
>[    1.410319] serial 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    1.410397] rtc_cmos 00:02: RTC can wake from S4
>[    1.410537] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    1.410586] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.410970] ACPI: bus type USB registered
>[    1.410991] usbcore: registered new interface driver usbfs
>[    1.410996] usbcore: registered new interface driver hub
>[    1.411022] usbcore: registered new device driver usb
>[    1.413461] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    1.413477] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
>[    1.413897] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    1.414236] acpi device:5d: registered as cooling_device8
>[    1.414307] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
>[    1.414683] 8139too 0000:05:00.0 eth0: RealTek RTL8139 at 0x000000000001c000, 00:10:b5:43:3b:3c, IRQ 18
>[    1.419008] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x7
>[    1.419131] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x7
>[    1.419154] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x7
>[    1.419163] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x7
>[    1.419173] microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x7
>[    1.419182] microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x7
>[    1.428142] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.428834] ehci-pci: EHCI PCI platform driver
>[    1.431115] microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x7
>[    1.431130] microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x7
>[    1.431140] platform serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
>[    1.434248] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    1.439902] [drm] Initialized drm 1.1.0 20060810
>[    1.494818] 8139too 0000:05:00.0 enp4s0: renamed from eth0
>[    1.500349] systemd-udevd[362]: renamed network interface eth0 to enp4s0
>[    1.525374] random: nonblocking pool is initialized
>[    1.531413] [drm] radeon kernel modesetting enabled.
>[    1.531804] [drm] initializing kernel modesetting (TAHITI 0x1002:0x679A 0x1458:0x254C).
>[    1.531815] [drm] register mmio base: 0xF0000000
>[    1.531816] [drm] register mmio size: 262144
>[    1.531870] ATOM BIOS: GV
>[    1.531901] [drm] Changing default dispclk from 500Mhz to 600Mhz
>[    1.531908] radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 0x00000000BFFFFFFF (3072M used)
>[    1.531909] radeon 0000:01:00.0: GTT: 1024M 0x00000000C0000000 - 0x00000000FFFFFFFF
>[    1.531910] [drm] Detected VRAM RAM=3072M, BAR=256M
>[    1.531910] [drm] RAM width 384bits DDR
>[    1.532000] [TTM] Zone  kernel: Available graphics memory: 8182424 kiB
>[    1.532001] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[    1.532001] [TTM] Initializing pool allocator
>[    1.532008] [TTM] Initializing DMA pool allocator
>[    1.532034] [drm] radeon: 3072M of VRAM memory ready
>[    1.532034] [drm] radeon: 1024M of GTT memory ready.
>[    1.532040] [drm] Loading tahiti Microcode
>[    1.533388] [drm] Internal thermal controller with fan control
>[    1.533421] [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
>[    1.537703] [drm] radeon: dpm initialized
>[    1.538450] [drm] GART: num cpu pages 262144, num gpu pages 262144
>[    1.538890] [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
>[    1.538891] [drm] PCIE gen 3 link speeds already enabled
>[    1.550125] [drm] PCIE GART of 1024M enabled (table at 0x0000000000277000).
>[    1.550212] radeon 0000:01:00.0: WB enabled
>[    1.550213] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000c0000c00 and cpu addr 0xffff880417dc2c00
>[    1.550214] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x00000000c0000c04 and cpu addr 0xffff880417dc2c04
>[    1.550215] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x00000000c0000c08 and cpu addr 0xffff880417dc2c08
>[    1.550216] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x00000000c0000c0c and cpu addr 0xffff880417dc2c0c
>[    1.550216] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x00000000c0000c10 and cpu addr 0xffff880417dc2c10
>[    1.550589] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90004fb5a18
>[    1.550589] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.550590] [drm] Driver supports precise vblank timestamp query.
>[    1.550590] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
>[    1.550603] radeon 0000:01:00.0: irq 30 for MSI/MSI-X
>[    1.550609] radeon 0000:01:00.0: radeon: using MSI.
>[    1.550622] [drm] radeon: irq initialized.
>[    1.598134] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    1.598146] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) bc:5f:f4:bf:4f:76
>[    1.598147] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    1.598198] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
>[    1.598353] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140926/utaddress-258)
>[    1.598357] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    1.598477] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    1.598484] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    1.598495] ehci-pci 0000:00:1a.0: debug port 2
>[    1.600798] e1000e 0000:00:19.0 enp0s25: renamed from eth0
>[    1.602448] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    1.602461] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0a3c000
>[    1.608470] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    1.608492] systemd-udevd[358]: renamed network interface eth0 to enp0s25
>[    1.608493] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.608494] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.608495] usb usb1: Product: EHCI Host Controller
>[    1.608505] usb usb1: Manufacturer: Linux 3.18.1-gentoo ehci_hcd
>[    1.608506] usb usb1: SerialNumber: 0000:00:1a.0
>[    1.608647] hub 1-0:1.0: USB hub found
>[    1.608651] hub 1-0:1.0: 2 ports detected
>[    1.608844] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    1.608847] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    1.608857] ehci-pci 0000:00:1d.0: debug port 2
>[    1.612745] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    1.612752] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0a3b000
>[    1.618476] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    1.618515] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.618516] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.618517] usb usb2: Product: EHCI Host Controller
>[    1.618518] usb usb2: Manufacturer: Linux 3.18.1-gentoo ehci_hcd
>[    1.618519] usb usb2: SerialNumber: 0000:00:1d.0
>[    1.618666] hub 2-0:1.0: USB hub found
>[    1.618670] hub 2-0:1.0: 2 ports detected
>[    1.619056] snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X
>[    1.619109] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.619113] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    1.619215] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.619228] xhci_hcd 0000:00:14.0: irq 32 for MSI/MSI-X
>[    1.619286] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.619287] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.619288] usb usb3: Product: xHCI Host Controller
>[    1.619289] usb usb3: Manufacturer: Linux 3.18.1-gentoo xhci-hcd
>[    1.619290] usb usb3: SerialNumber: 0000:00:14.0
>[    1.619381] hub 3-0:1.0: USB hub found
>[    1.619401] hub 3-0:1.0: 14 ports detected
>[    1.620381] hda-i915: get_power symbol get fail
>[    1.620382] snd_hda_intel 0000:00:03.0: Error request power-well from i915
>[    1.621152] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.621154] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
>[    1.621183] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.621184] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.621185] usb usb4: Product: xHCI Host Controller
>[    1.621186] usb usb4: Manufacturer: Linux 3.18.1-gentoo xhci-hcd
>[    1.621186] usb usb4: SerialNumber: 0000:00:14.0
>[    1.621265] hub 4-0:1.0: USB hub found
>[    1.621278] hub 4-0:1.0: 6 ports detected
>[    1.633928] sound hdaudioC1D0: ALC1150: SKU not ready 0x00000000
>[    1.634386] sound hdaudioC1D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
>[    1.634387] sound hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    1.634388] sound hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[    1.634389] sound hdaudioC1D0:    mono: mono_out=0x0
>[    1.634390] sound hdaudioC1D0:    dig-out=0x1e/0x0
>[    1.634391] sound hdaudioC1D0:    inputs:
>[    1.634392] sound hdaudioC1D0:      Front Mic=0x19
>[    1.634393] sound hdaudioC1D0:      Rear Mic=0x18
>[    1.634394] sound hdaudioC1D0:      Line=0x1a
>[    1.643926] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input6
>[    1.644119] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
>[    1.644158] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
>[    1.644197] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
>[    1.644235] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
>[    1.644274] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
>[    1.699466] [drm] ring test on 0 succeeded in 1 usecs
>[    1.699469] [drm] ring test on 1 succeeded in 1 usecs
>[    1.699472] [drm] ring test on 2 succeeded in 1 usecs
>[    1.699477] [drm] ring test on 3 succeeded in 3 usecs
>[    1.699482] [drm] ring test on 4 succeeded in 3 usecs
>[    1.886851] [drm] ring test on 5 succeeded in 2 usecs
>[    1.886854] [drm] UVD initialized successfully.
>[    1.887007] [drm] ib test on ring 0 succeeded in 0 usecs
>[    1.887036] [drm] ib test on ring 1 succeeded in 0 usecs
>[    1.887062] [drm] ib test on ring 2 succeeded in 0 usecs
>[    1.887075] [drm] ib test on ring 3 succeeded in 0 usecs
>[    1.887088] [drm] ib test on ring 4 succeeded in 0 usecs
>[    1.910886] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.920900] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.924063] usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd
>[    1.936644] usb 4-4: New USB device found, idVendor=2109, idProduct=0812
>[    1.936646] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.936647] usb 4-4: Product: USB3.0 Hub        
>[    1.936647] usb 4-4: Manufacturer: VIA Labs, Inc. 
>[    1.937060] hub 4-4:1.0: USB hub found
>[    1.937194] hub 4-4:1.0: 4 ports detected
>[    2.025382] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
>[    2.025383] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.025681] hub 1-1:1.0: USB hub found
>[    2.025752] hub 1-1:1.0: 6 ports detected
>[    2.035397] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
>[    2.035398] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.035687] hub 2-1:1.0: USB hub found
>[    2.035771] hub 2-1:1.0: 8 ports detected
>[    2.076188] usb 3-4: new high-speed USB device number 3 using xhci_hcd
>[    2.144385] usb 4-2: new SuperSpeed USB device number 3 using xhci_hcd
>[    2.156254] usb 4-2: New USB device found, idVendor=0bc2, idProduct=a0a4
>[    2.156257] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[    2.156269] usb 4-2: Product: Backup+ Desk Mac
>[    2.156269] usb 4-2: Manufacturer: Seagate
>[    2.156270] usb 4-2: SerialNumber: NA5R1FR1
>[    2.172795] usb-storage 4-2:1.0: USB Mass Storage device detected
>[    2.172943] scsi host8: usb-storage 4-2:1.0
>[    2.173011] usbcore: registered new interface driver usb-storage
>[    2.241840] usb 3-4: New USB device found, idVendor=2109, idProduct=2812
>[    2.241842] usb 3-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    2.241843] usb 3-4: Product: USB2.0 Hub        
>[    2.242435] hub 3-4:1.0: USB hub found
>[    2.242774] hub 3-4:1.0: 4 ports detected
>[    2.273647] Switched to clocksource tsc
>[    2.403663] usb 3-5: new low-speed USB device number 4 using xhci_hcd
>[    2.407842] usb 4-4.3: new SuperSpeed USB device number 4 using xhci_hcd
>[    2.421312] usb 4-4.3: New USB device found, idVendor=2109, idProduct=0812
>[    2.421325] usb 4-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.421326] usb 4-4.3: Product: USB3.0 Hub        
>[    2.421327] usb 4-4.3: Manufacturer: VIA Labs, Inc. 
>[    2.421921] hub 4-4.3:1.0: USB hub found
>[    2.422060] hub 4-4.3:1.0: 4 ports detected
>[    2.559927] [drm] ib test on ring 5 succeeded
>[    2.560740] [drm] Radeon Display Connectors
>[    2.560741] [drm] Connector 0:
>[    2.560742] [drm]   DP-1
>[    2.560742] [drm]   HPD5
>[    2.560743] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
>[    2.560743] [drm]   Encoders:
>[    2.560744] [drm]     DFP1: INTERNAL_UNIPHY2
>[    2.560745] [drm] Connector 1:
>[    2.560745] [drm]   DP-2
>[    2.560745] [drm]   HPD4
>[    2.560746] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
>[    2.560746] [drm]   Encoders:
>[    2.560747] [drm]     DFP2: INTERNAL_UNIPHY2
>[    2.560747] [drm] Connector 2:
>[    2.560748] [drm]   HDMI-A-1
>[    2.560748] [drm]   HPD1
>[    2.560749] [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
>[    2.560749] [drm]   Encoders:
>[    2.560750] [drm]     DFP3: INTERNAL_UNIPHY1
>[    2.560750] [drm] Connector 3:
>[    2.560751] [drm]   DVI-I-1
>[    2.560751] [drm]   HPD3
>[    2.560752] [drm]   DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
>[    2.560752] [drm]   Encoders:
>[    2.560753] [drm]     DFP4: INTERNAL_UNIPHY
>[    2.560753] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[    2.572805] usb 3-5: New USB device found, idVendor=046d, idProduct=c31c
>[    2.572807] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.572808] usb 3-5: Product: USB Keyboard
>[    2.572809] usb 3-5: Manufacturer: Logitech
>[    2.572891] usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    2.572894] usb 3-5: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
>[    2.590668] usb 4-4.4: new SuperSpeed USB device number 5 using xhci_hcd
>[    2.600275] [drm] fb mappable at 0xE0479000
>[    2.600275] [drm] vram apper at 0xE0000000
>[    2.600276] [drm] size 8294400
>[    2.600276] [drm] fb depth is 24
>[    2.600277] [drm]    pitch is 7680
>[    2.600348] fbcon: radeondrmfb (fb0) is primary device
>[    2.602553] usb 4-4.4: New USB device found, idVendor=2109, idProduct=0812
>[    2.602554] usb 4-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.602555] usb 4-4.4: Product: USB3.0 Hub        
>[    2.602556] usb 4-4.4: Manufacturer: VIA Labs, Inc. 
>[    2.603049] hub 4-4.4:1.0: USB hub found
>[    2.603179] hub 4-4.4:1.0: 4 ports detected
>[    2.611688] Console: switching to colour frame buffer device 240x67
>[    2.614007] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
>[    2.614007] radeon 0000:01:00.0: registered panic notifier
>[    2.641738] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
>[    2.641890] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
>[    2.641913] snd_hda_intel 0000:01:00.1: irq 33 for MSI/MSI-X
>[    2.643317] usb 3-4.3: new high-speed USB device number 5 using xhci_hcd
>[    2.660273] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input12
>[    2.660427] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input13
>[    2.660558] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14
>[    2.660634] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
>[    2.660692] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
>[    2.660739] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
>[    2.730608] usb 3-4.3: New USB device found, idVendor=2109, idProduct=2812
>[    2.730610] usb 3-4.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    2.730611] usb 3-4.3: Product: USB2.0 Hub        
>[    2.731326] hub 3-4.3:1.0: USB hub found
>[    2.731616] hub 3-4.3:1.0: 4 ports detected
>[    2.882363] usb 3-7: new full-speed USB device number 6 using xhci_hcd
>[    3.049828] usb 3-7: New USB device found, idVendor=03f0, idProduct=a407
>[    3.049831] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.049832] usb 3-7: Product: HP Link-5 micro dongle
>[    3.049833] usb 3-7: Manufacturer: HP
>[    3.049988] usb 3-7: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    3.121907] usb 3-4.4: new high-speed USB device number 7 using xhci_hcd
>[    3.176135] scsi 8:0:0:0: Direct-Access     Seagate  Backup+ Desk Mac 0505 PQ: 0 ANSI: 6
>[    3.181102] sd 8:0:0:0: [sde] 976754645 4096-byte logical blocks: (4.00 TB/3.63 TiB)
>[    3.202170] sd 8:0:0:0: [sde] Write Protect is off
>[    3.202173] sd 8:0:0:0: [sde] Mode Sense: 4f 00 00 00
>[    3.202462] sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.202866] sd 8:0:0:0: [sde] 976754645 4096-byte logical blocks: (4.00 TB/3.63 TiB)
>[    3.209269] usb 3-4.4: New USB device found, idVendor=2109, idProduct=2812
>[    3.209271] usb 3-4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    3.209273] usb 3-4.4: Product: USB2.0 Hub        
>[    3.209977] hub 3-4.4:1.0: USB hub found
>[    3.210235] hub 3-4.4:1.0: 4 ports detected
>[    3.254419]  sde: sde1
>[    3.254884] sd 8:0:0:0: [sde] 976754645 4096-byte logical blocks: (4.00 TB/3.63 TiB)
>[    3.255283] sd 8:0:0:0: [sde] Attached SCSI disk
>[    3.361061] usb 3-9: new high-speed USB device number 8 using xhci_hcd
>[    3.433330] usb 4-5: new SuperSpeed USB device number 6 using xhci_hcd
>[    3.446514] usb 4-5: New USB device found, idVendor=174c, idProduct=3074
>[    3.446516] usb 4-5: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[    3.446518] usb 4-5: Product: AS2107
>[    3.446518] usb 4-5: Manufacturer: ASMedia
>[    3.446519] usb 4-5: SerialNumber: USB2.0 Hub
>[    3.447210] hub 4-5:1.0: USB hub found
>[    3.447364] hub 4-5:1.0: 4 ports detected
>[    3.527786] usb 3-9: New USB device found, idVendor=174c, idProduct=2074
>[    3.527788] usb 3-9: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[    3.527790] usb 3-9: Product: AS2107
>[    3.527790] usb 3-9: Manufacturer: ASMedia
>[    3.527791] usb 3-9: SerialNumber: USB2.0 Hub
>[    3.528560] hub 3-9:1.0: USB hub found
>[    3.528777] hub 3-9:1.0: 4 ports detected
>[    3.600623] usb 3-4.4.3: new high-speed USB device number 9 using xhci_hcd
>[    3.687951] usb 3-4.4.3: New USB device found, idVendor=054c, idProduct=031e
>[    3.687954] usb 3-4.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    3.687956] usb 3-4.4.3: Product: Sony Digital Book Reader
>[    3.687957] usb 3-4.4.3: Manufacturer: Sony
>[    3.687968] usb 3-4.4.3: SerialNumber: 08004610011D6ECE
>[    3.692947] usb-storage 3-4.4.3:1.0: USB Mass Storage device detected
>[    3.693178] scsi host9: usb-storage 3-4.4.3:1.0
>[    3.839762] usb 3-11: new full-speed USB device number 10 using xhci_hcd
>[    4.005609] usb 3-11: New USB device found, idVendor=04e8, idProduct=327e
>[    4.005611] usb 3-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    4.005612] usb 3-11: Product: Samsung ML-2510 Series
>[    4.005613] usb 3-11: Manufacturer: Samsung
>[    4.005614] usb 3-11: SerialNumber: 3V61BKEQ317623H.
>[    4.199346] WARNING! power/level is deprecated; use power/control instead
>[    4.326952] usbcore: registered new interface driver usbhid
>[    4.326953] usbhid: USB HID core driver
>[    4.327845] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046D:C31C.0001/input/input18
>[    4.327883] hid-generic 0003:046D:C31C.0001: input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-5/input0
>[    4.329546] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C31C.0002/input/input19
>[    4.329601] hid-generic 0003:046D:C31C.0002: input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-5/input1
>[    4.329676] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/0003:03F0:A407.0003/input/input20
>[    4.329724] hid-generic 0003:03F0:A407.0003: input: USB HID v1.11 Keyboard [HP HP Link-5 micro dongle] on usb-0000:00:14.0-7/input0
>[    4.329872] input: HP HP Link-5 micro dongle as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.1/0003:03F0:A407.0004/input/input21
>[    4.330025] hid-generic 0003:03F0:A407.0004: input,hiddev0: USB HID v1.11 Mouse [HP HP Link-5 micro dongle] on usb-0000:00:14.0-7/input1
>[    4.697582] scsi 9:0:0:0: Direct-Access     Sony     PRS-300          1000 PQ: 0 ANSI: 2
>[    4.697825] scsi 9:0:0:1: Direct-Access     Sony     PRS-300 Launcher 1000 PQ: 0 ANSI: 2
>[    4.703625] sd 9:0:0:0: [sdf] 908544 512-byte logical blocks: (465 MB/443 MiB)
>[    4.711460] sd 9:0:0:1: [sdg] 20480 512-byte logical blocks: (10.4 MB/10.0 MiB)
>[    4.811588] sd 9:0:0:0: [sdf] Write Protect is off
>[    4.811590] sd 9:0:0:0: [sdf] Mode Sense: 0f 00 00 00
>[    4.911659] sd 9:0:0:1: [sdg] Write Protect is on
>[    4.911661] sd 9:0:0:1: [sdg] Mode Sense: 0f 00 80 00
>[    4.911993] sd 9:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    4.912234] sd 9:0:0:1: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[    5.260666] fuse init (API version 7.23)
>[    5.262765] Adding 2048252k swap on /dev/sdd1.  Priority:10 extents:1 across:2048252k FS
>[    5.263438] Adding 4194300k swap on /dev/sdb1.  Priority:10 extents:1 across:4194300k FS
>[    5.313181]  sdf:
>[    5.314039]  sdg:
>[    5.449709] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,discard,data=ordered
>[    5.518942] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
>[    5.601786] kjournald starting.  Commit interval 5 seconds
>[    5.601865] EXT3-fs (sdd2): warning: maximal mount count reached, running e2fsck is recommended
>[    5.602007] EXT3-fs (sdd2): using internal journal
>[    5.602008] EXT3-fs (sdd2): mounted filesystem with writeback data mode
>[    5.612723] sd 9:0:0:1: [sdg] Attached SCSI removable disk
>[    5.626995] kjournald starting.  Commit interval 5 seconds
>[    5.627072] EXT3-fs (sdd3): warning: maximal mount count reached, running e2fsck is recommended
>[    5.627189] EXT3-fs (sdd3): using internal journal
>[    5.627190] EXT3-fs (sdd3): mounted filesystem with writeback data mode
>[    5.675228] EXT4-fs (sdc3): warning: maximal mount count reached, running e2fsck is recommended
>[    5.680750] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: acl,user_xattr,errors=remount-ro
>[    5.712837] sd 9:0:0:0: [sdf] Attached SCSI removable disk
>[    5.789970] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: acl,user_xattr,errors=remount-ro
>[    6.451945] NET: Registered protocol family 10
>[    6.476056] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
>[    6.613038] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
>[    6.713985] e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
>[    6.714047] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[    6.714655] device enp0s25 entered promiscuous mode
>[    6.716871] device lan0 entered promiscuous mode
>[    6.717334] IPv6: ADDRCONF(NETDEV_UP): lan0: link is not ready
>[   10.479398] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[   10.479450] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
>[   10.479470] lan0: port 1(enp0s25) entered forwarding state
>[   10.479472] lan0: port 1(enp0s25) entered forwarding state
>[   10.479507] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready
>[   21.134742] io scheduler cfq registered
>[   21.286722] netpoll: netconsole: local port 5555
>[   21.287246] netpoll: netconsole: local IPv4 address 192.168.1.71
>[   21.287692] netpoll: netconsole: interface 'lan0'
>[   21.288136] netpoll: netconsole: remote port 6666
>[   21.288616] netpoll: netconsole: remote IPv4 address 192.168.1.72
>[   21.289079] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
>[   21.289581] console [netcon0] enabled
>[   21.290033] netconsole: network logging started
>[  118.797115] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
>[24691.364821] UDP: bad checksum. From 222.64.251.155:6881 to 192.168.77.71:58501 ulen 304
>[46748.623328] usb 3-4.4.3: USB disconnect, device number 9
>[46748.623712] sd 9:0:0:0: [sdf] Synchronizing SCSI cache
>[46748.623751] sd 9:0:0:0: [sdf]  
>[46748.623754] Result: hostbyte=0x01 driverbyte=0x00
>[49471.296234] usb 3-11: reset full-speed USB device number 10 using xhci_hcd
>[49471.296275] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 14.
>[49471.296281] usb 3-11: hub failed to enable device, error -22
>[49471.449274] usb 3-11: reset full-speed USB device number 10 using xhci_hcd
>[49471.449296] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 14.
>[49471.449301] usb 3-11: hub failed to enable device, error -22
>[49471.602526] usb 3-11: reset full-speed USB device number 10 using xhci_hcd
>[49471.614272] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c7530b80
>[49471.614284] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c7530bc8
>[49490.674759] usb 3-11: USB disconnect, device number 10
>[61374.151199] UDP: bad checksum. From 157.7.200.30:59755 to 192.168.77.71:58501 ulen 294
>[65483.336991] UDP: bad checksum. From 203.81.107.11:62668 to 192.168.77.71:58501 ulen 294
>[98909.264239] Watchdog[9772]: segfault at 0 ip 00000000f56b5127 sp 00000000edb47c40 error 6 in chrome[f1aba000+5d1f000]
>[101321.975851] trusted: version magic '3.17.3-gentoo SMP preempt mod_unload ' should be '3.18.1-gentoo SMP preempt mod_unload '
>[102367.964062] Watchdog[25789]: segfault at 0 ip 00000000f56ba127 sp 00000000edb4cc40 error 6 in chrome[f1abf000+5d1f000]
>[102392.863280] perf interrupt took too long (2535 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
>[114480.156808] usb 3-4.4.3: new high-speed USB device number 11 using xhci_hcd
>[114480.244099] usb 3-4.4.3: New USB device found, idVendor=054c, idProduct=031e
>[114480.244110] usb 3-4.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[114480.244112] usb 3-4.4.3: Product: Sony Digital Book Reader
>[114480.244115] usb 3-4.4.3: Manufacturer: Sony
>[114480.244117] usb 3-4.4.3: SerialNumber: 08004610011D6ECE
>[114480.248924] usb-storage 3-4.4.3:1.0: USB Mass Storage device detected
>[114480.249192] scsi host10: usb-storage 3-4.4.3:1.0
>[114481.275547] scsi 10:0:0:0: Direct-Access     Sony     PRS-300          1000 PQ: 0 ANSI: 2
>[114481.275965] scsi 10:0:0:1: Direct-Access     Sony     PRS-300 Launcher 1000 PQ: 0 ANSI: 2
>[114481.287194] sd 10:0:0:0: [sdf] Attached SCSI removable disk
>[114481.287597] sd 10:0:0:1: [sdg] Attached SCSI removable disk
>[114483.948942] sd 10:0:0:0: [sdf] 908544 512-byte logical blocks: (465 MB/443 MiB)
>[114483.949182] sd 10:0:0:1: [sdg] 20480 512-byte logical blocks: (10.4 MB/10.0 MiB)
>[114484.141260] sd 10:0:0:1: [sdg] Write Protect is on
>[114484.141270] sd 10:0:0:1: [sdg] Mode Sense: 0f 00 80 00
>[114484.241395] sd 10:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[114484.751824]  sdf:
>[114484.758698]  sdg:
>[115897.319030] usb 3-4.4.3: USB disconnect, device number 11
>[115897.319306] sd 10:0:0:0: [sdf] Synchronizing SCSI cache
>[115897.319332] sd 10:0:0:0: [sdf]  
>[115897.319334] Result: hostbyte=0x01 driverbyte=0x00
>[150342.927585] Watchdog[31970]: segfault at 0 ip 00000000f568c127 sp 00000000edb1ec40 error 6 in chrome[f1a91000+5d1f000]
>[153349.838471] Watchdog[22581]: segfault at 0 ip 00000000f5681127 sp 00000000edb13c40 error 6 in chrome[f1a86000+5d1f000]
>[153359.654574] perf interrupt took too long (5058 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
>[154992.516565] UDP: bad checksum. From 111.76.145.133:2010 to 192.168.77.71:58501 ulen 304

Actions: View

Attachments on bug 87625: 111242 | 111243

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.