Attachment 115366 Details for Bug 89600 – dmesg info on BDW-Y after S3+S4

dmesg info on BDW-Y after S3+S4

dmesg5.txt (text/plain), 123.40 KB, created by ye.tian on 2015-04-27 08:37:51 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: ye.tian

Created: 2015-04-27 08:37:51 UTC

Size: 123.40 KB

patch

obsolete

>[    1.585996] [drm:intel_dp_get_dpcd] Displayport TPS3 supported
>[    1.586303] [drm:intel_dp_print_rates] source rates: 162000,270000,540000,
>[    1.586307] [drm:intel_dp_print_rates] sink rates: 162000,270000,540000,
>[    1.586310] [drm:intel_dp_print_rates] common rates: 162000,270000,540000,
>[    1.586321] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    1.588033] [drm:drm_dp_i2c_do_msg] native defer
>[    1.589344] [drm:drm_dp_i2c_do_msg] native defer
>[    1.590629] [drm:drm_dp_i2c_do_msg] native defer
>[    1.591928] [drm:drm_dp_i2c_do_msg] native defer
>[    1.593207] [drm:drm_dp_i2c_do_msg] native defer
>[    1.594504] [drm:drm_dp_i2c_do_msg] native defer
>[    1.595782] [drm:drm_dp_i2c_do_msg] native defer
>[    1.597139] [drm:drm_dp_i2c_do_msg] native defer
>[    1.598253] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.598259] [drm:intel_dp_drrs_init] VBT doesn't support DRRS
>[    1.598267] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 937/937
>[    1.604637] [drm:intel_modeset_readout_hw_state] [CRTC:20] hw state readout: enabled
>[    1.604644] [drm:intel_modeset_readout_hw_state] [CRTC:24] hw state readout: disabled
>[    1.604648] [drm:intel_modeset_readout_hw_state] [CRTC:28] hw state readout: disabled
>[    1.604652] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[    1.604656] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[    1.604663] [drm:intel_modeset_readout_hw_state] [ENCODER:30:TMDS-30] hw state readout: enabled, pipe A
>[    1.604667] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A
>[    1.604671] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:eDP-1] hw state readout: enabled
>[    1.604675] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:HDMI-A-1] hw state readout: disabled
>[    1.604681] [drm:intel_dump_pipe_config] [CRTC:20][setup_hw_state] config ffff88009852c400 for pipe A
>[    1.604683] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.604686] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.604689] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.604693] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 350797, link_n: 524288, tu: 64
>[    1.604696] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.604698] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.604700] [drm:intel_dump_pipe_config] requested mode:
>[    1.604705] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
>[    1.604708] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.604711] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
>[    1.604715] [drm:intel_dump_crtc_timings] crtc timings: 361309 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x0 flags: 0xa
>[    1.604718] [drm:intel_dump_pipe_config] port clock: 540000
>[    1.604720] [drm:intel_dump_pipe_config] pipe src size: 720x400
>[    1.604722] [drm:intel_dump_pipe_config] num_scalers: 0
>[    1.604724] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[    1.604726] [drm:intel_dump_pipe_config] scaler id: 0
>[    1.604729] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.604731] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x0c800708, enabled
>[    1.604733] [drm:intel_dump_pipe_config] ips: 0
>[    1.604735] [drm:intel_dump_pipe_config] double wide: 0
>[    1.604737] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.604741] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 disabled, scaler_id = -1
>[    1.604744] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    1.604747] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    1.604751] [drm:intel_dump_pipe_config] [CRTC:24][setup_hw_state] config ffff88009852d400 for pipe B
>[    1.604753] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.604756] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.604759] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.604762] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.604765] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.604767] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.604769] [drm:intel_dump_pipe_config] requested mode:
>[    1.604772] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.604774] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.604778] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.604781] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.604783] [drm:intel_dump_pipe_config] port clock: 0
>[    1.604785] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.604787] [drm:intel_dump_pipe_config] num_scalers: 0
>[    1.604789] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[    1.604791] [drm:intel_dump_pipe_config] scaler id: 0
>[    1.604794] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.604796] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.604798] [drm:intel_dump_pipe_config] ips: 0
>[    1.604800] [drm:intel_dump_pipe_config] double wide: 0
>[    1.604802] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.604805] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 1.0 idx: 3 disabled, scaler_id = -1
>[    1.604808] [drm:intel_dump_pipe_config] CURSOR PLANE:23 plane: 1.2 idx: 4 disabled, scaler_id = -1
>[    1.604811] [drm:intel_dump_pipe_config] STANDARD PLANE:25 plane: 1.1 idx: 5 disabled, scaler_id = 0
>[    1.604815] [drm:intel_dump_pipe_config] [CRTC:28][setup_hw_state] config ffff88009852e400 for pipe C
>[    1.604817] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.604819] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.604822] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.604824] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.604827] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.604829] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.604831] [drm:intel_dump_pipe_config] requested mode:
>[    1.604835] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.604837] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.604840] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.604843] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.604845] [drm:intel_dump_pipe_config] port clock: 0
>[    1.604847] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.604849] [drm:intel_dump_pipe_config] num_scalers: 0
>[    1.604851] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[    1.604853] [drm:intel_dump_pipe_config] scaler id: 0
>[    1.604856] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.604858] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.604860] [drm:intel_dump_pipe_config] ips: 0
>[    1.604862] [drm:intel_dump_pipe_config] double wide: 0
>[    1.604864] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.604867] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 2.0 idx: 6 disabled, scaler_id = -1
>[    1.604870] [drm:intel_dump_pipe_config] CURSOR PLANE:27 plane: 2.3 idx: 7 disabled, scaler_id = -1
>[    1.604872] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 2.1 idx: 8 disabled, scaler_id = 0
>[    1.604882] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
>[    1.604886] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
>[    1.604889] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
>[    1.604892] [drm:check_crtc_state] [CRTC:20]
>[    1.604902] [drm:check_crtc_state] [CRTC:24]
>[    1.604905] [drm:check_crtc_state] [CRTC:28]
>[    1.604908] [drm:check_shared_dpll_state] WRPLL 1
>[    1.604910] [drm:check_shared_dpll_state] WRPLL 2
>[    1.604962] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [0, fffff000]
>[    1.606954] [drm:i915_gem_context_init] LR context support initialized
>[    1.607082] [drm:intel_init_pipe_control] render ring pipe control offset: 0x00034000
>[    1.607261] [drm:gen8_init_common_ring] Execlists enabled for render ring
>[    1.607268] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
>[    1.607273] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
>[    1.607277] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
>[    1.607401] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered
>[    1.607441] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
>[    1.607444] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
>[    1.607790] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
>[    1.608125] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    1.608133] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] status updated from 3 to 1
>[    1.608148] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.608154] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
>[    1.608159] [drm:drm_mode_debug_printmodeline] Modeline 32:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    1.608164] [drm:drm_mode_debug_printmodeline] Modeline 33:"3200x1800" 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa
>[    1.608167] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1]
>[    1.608169] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
>[    1.608346] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    1.608351] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.608357] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1] status updated from 3 to 2
>[    1.608365] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1] disconnected
>[    1.608370] [drm:drm_setup_crtcs] 
>[    1.608375] [drm:drm_enable_connectors] connector 31 enabled? yes
>[    1.608379] [drm:drm_enable_connectors] connector 40 enabled? no
>[    1.608383] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    1.608387] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    1.608391] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:20]: 3200x1800
>[    1.608395] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.608400] [drm:drm_setup_crtcs] desired mode 3200x1800 set on crtc 20 (0,0)
>[    1.608406] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.608411] [drm:i915_gem_object_create_stolen] creating stolen object: size=15f9000
>[    1.608420] [drm:i915_pages_create_for_stolen] offset=0x0, size=23040000
>[    1.611972] [drm:intelfb_create] allocated 3200x1800 fb: 0x0009c000, bo ffff88024fdb8000
>[    1.612110] fbcon: inteldrmfb (fb0) is primary device
>[    1.612278] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
>[    1.612281] [drm:intel_set_config_compute_mode_changes] crtc has no fb, will flip
>[    1.612282] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
>[    1.612287] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.612293] [drm:drm_mode_debug_printmodeline] Modeline 42:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    1.612296] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=1, fb_changed=1
>[    1.612301] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    1.612306] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    1.612310] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[    1.612312] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[    1.612317] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[    1.612327] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[    1.612329] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[    1.612334] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff88025035bae0
>[    1.612336] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[    1.612339] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88025489e800 for pipe A
>[    1.612340] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.612342] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[    1.612345] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.612348] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[    1.612351] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.612352] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.612354] [drm:intel_dump_pipe_config] requested mode:
>[    1.612360] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    1.612361] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.612365] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    1.612369] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[    1.612372] [drm:intel_dump_pipe_config] port clock: 540000
>[    1.612373] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[    1.612375] [drm:intel_dump_pipe_config] num_scalers: 0
>[    1.612376] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[    1.612377] [drm:intel_dump_pipe_config] scaler id: 0
>[    1.612380] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.612383] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.612384] [drm:intel_dump_pipe_config] ips: 1
>[    1.612386] [drm:intel_dump_pipe_config] double wide: 0
>[    1.612387] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.612391] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 disabled, scaler_id = -1
>[    1.612393] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    1.612396] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    1.612399] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    1.612815] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
>[    1.612936] [drm] Initialized i915 1.6.0 20150410 for 0000:00:02.0 on minor 0
>[    1.614487] [drm:intel_edp_backlight_off] 
>[    1.665702] usb 1-1: New USB device found, idVendor=0b95, idProduct=772b
>[    1.665705] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    1.665707] usb 1-1: Product: AX88772B
>[    1.665709] usb 1-1: Manufacturer: ASIX Elec. Corp.
>[    1.665710] usb 1-1: SerialNumber: 00034C
>[    1.815147] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    1.831891] [drm:edp_panel_off] Turn eDP port A panel power off
>[    1.831896] [drm:wait_panel_off] Wait for panel power off time
>[    1.831901] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[    1.892285] [drm:wait_panel_status] Wait complete
>[    1.892298] [drm:intel_fbc_update] disabled per chip default
>[    1.892308] [drm:intel_display_power_put] disabling display
>[    1.892311] [drm:hsw_set_power_well] Requesting to disable the power well
>[    1.892343] [drm:edp_panel_on] Turn eDP port A panel power on
>[    1.892346] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    2.107367] tsc: Refined TSC clocksource calibration: 1296.997 MHz
>[    2.431002] asix 1-1:1.0 eth0: register 'asix' at usb-0000:00:14.0-1, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:73:43
>[    2.432474] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
>[    2.492856] [drm:wait_panel_status] Wait complete
>[    2.492861] [drm:wait_panel_on] Wait for panel power on
>[    2.492866] [drm:wait_panel_status] mask b000000f value 80000008 status 9000000a control abcd0003
>[    2.583696] usb 1-4: new full-speed USB device number 3 using xhci_hcd
>[    2.705854] [drm:wait_panel_status] Wait complete
>[    2.705864] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    2.705872] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    2.706960] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.706962] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[    2.706963] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    2.707598] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[    2.707599] [drm:intel_dp_set_signal_levels] Using vswing level 1
>[    2.707601] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    2.708223] [drm:intel_dp_start_link_train] clock recovery OK
>[    2.709158] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
>[    2.709159] [drm:intel_dp_set_signal_levels] Using vswing level 1
>[    2.709160] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1
>[    2.710085] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[    2.710379] [drm:intel_edp_backlight_on] 
>[    2.710382] [drm:intel_panel_enable_backlight] pipe A
>[    2.710391] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[    2.710398] [drm:intel_psr_match_conditions] PSR disable by flag
>[    2.710399] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
>[    2.743718] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
>[    2.743722] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
>[    2.743724] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
>[    2.743727] [drm:check_crtc_state] [CRTC:20]
>[    2.743737] [drm:check_crtc_state] [CRTC:24]
>[    2.743738] [drm:check_crtc_state] [CRTC:28]
>[    2.743740] [drm:check_shared_dpll_state] WRPLL 1
>[    2.743742] [drm:check_shared_dpll_state] WRPLL 2
>[    2.743749] [drm:intel_crtc_set_config] [CRTC:24] [NOFB]
>[    2.743752] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0
>[    2.743758] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    2.743762] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[    2.743765] [drm:intel_crtc_set_config] [CRTC:28] [NOFB]
>[    2.743767] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0
>[    2.743769] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    2.743772] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[    2.743776] [drm:drm_fb_helper_hotplug_event] 
>[    2.743778] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
>[    2.743779] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
>[    2.744125] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
>[    2.744451] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    2.744467] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    2.744472] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
>[    2.744475] [drm:drm_mode_debug_printmodeline] Modeline 32:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    2.744478] [drm:drm_mode_debug_printmodeline] Modeline 33:"3200x1800" 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa
>[    2.744480] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1]
>[    2.744482] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
>[    2.744658] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    2.744660] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.744662] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1] disconnected
>[    2.744666] [drm:drm_setup_crtcs] 
>[    2.744668] [drm:drm_enable_connectors] connector 31 enabled? yes
>[    2.744669] [drm:drm_enable_connectors] connector 40 enabled? no
>[    2.744671] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    2.744673] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    2.744675] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:20]: 3200x1800
>[    2.744676] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    2.744679] [drm:drm_setup_crtcs] desired mode 3200x1800 set on crtc 20 (0,0)
>[    2.744732] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
>[    2.744734] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
>[    2.744737] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    2.744740] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    2.744743] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[    2.744744] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[    2.744747] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[    2.744754] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[    2.744756] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[    2.744759] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff8802538ec600
>[    2.744760] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[    2.744763] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88024f861000 for pipe A
>[    2.744764] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    2.744765] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[    2.744768] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.744770] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[    2.744772] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    2.744773] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    2.744774] [drm:intel_dump_pipe_config] requested mode:
>[    2.744778] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    2.744778] [drm:intel_dump_pipe_config] adjusted mode:
>[    2.744781] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    2.744784] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[    2.744785] [drm:intel_dump_pipe_config] port clock: 540000
>[    2.744786] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[    2.744787] [drm:intel_dump_pipe_config] num_scalers: 0
>[    2.744788] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[    2.744789] [drm:intel_dump_pipe_config] scaler id: 0
>[    2.744791] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.744793] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.744794] [drm:intel_dump_pipe_config] ips: 1
>[    2.744795] [drm:intel_dump_pipe_config] double wide: 0
>[    2.744796] [drm:intel_dump_pipe_config] planes on this crtc
>[    2.744800] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[    2.744803] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258
>[    2.744803] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800
>[    2.744805] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    2.744807] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    2.744810] [drm:intel_crtc_set_config] [CRTC:24] [NOFB]
>[    2.744812] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0
>[    2.744814] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    2.744816] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[    2.744819] [drm:intel_crtc_set_config] [CRTC:28] [NOFB]
>[    2.744820] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0
>[    2.744823] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    2.744824] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[    2.744834] Console: switching to colour frame buffer device 400x112
>[    2.744845] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
>[    2.744847] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
>[    2.744849] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    2.744851] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    2.744853] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[    2.744854] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[    2.744857] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[    2.744862] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[    2.744864] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[    2.744866] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff8802538ec660
>[    2.744867] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[    2.744869] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88024f861000 for pipe A
>[    2.744870] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    2.744871] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[    2.744873] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.744876] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[    2.744878] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    2.744879] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    2.744880] [drm:intel_dump_pipe_config] requested mode:
>[    2.744883] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    2.744883] [drm:intel_dump_pipe_config] adjusted mode:
>[    2.744886] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    2.744889] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[    2.744890] [drm:intel_dump_pipe_config] port clock: 540000
>[    2.744891] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[    2.744892] [drm:intel_dump_pipe_config] num_scalers: 0
>[    2.744893] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[    2.744894] [drm:intel_dump_pipe_config] scaler id: 0
>[    2.744895] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.744897] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.744898] [drm:intel_dump_pipe_config] ips: 1
>[    2.744899] [drm:intel_dump_pipe_config] double wide: 0
>[    2.744899] [drm:intel_dump_pipe_config] planes on this crtc
>[    2.744903] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[    2.744905] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258
>[    2.744905] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800
>[    2.744907] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    2.744909] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    2.772806] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.772857] i915 0000:00:02.0: registered panic notifier
>[    2.774688] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[    2.776471] usb 1-4: New USB device found, idVendor=0489, idProduct=e07a
>[    2.776566] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.776647] usb 1-4: Product: BCM20702A0
>[    2.776718] usb 1-4: Manufacturer: Broadcom Corp
>[    2.776787] usb 1-4: SerialNumber: 38B1DBE42AC2
>[    2.778683] dracut: Starting plymouth daemon
>[    2.790319] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
>[    2.790323] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
>[    2.790330] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    2.790334] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    2.790338] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[    2.790339] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[    2.790344] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[    2.790352] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[    2.790354] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[    2.790357] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff8802552aa900
>[    2.790358] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[    2.790361] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88009840d800 for pipe A
>[    2.790362] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    2.790363] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[    2.790366] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.790368] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[    2.790370] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    2.790371] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    2.790372] [drm:intel_dump_pipe_config] requested mode:
>[    2.790376] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    2.790377] [drm:intel_dump_pipe_config] adjusted mode:
>[    2.790380] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    2.790383] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[    2.790384] [drm:intel_dump_pipe_config] port clock: 540000
>[    2.790385] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[    2.790386] [drm:intel_dump_pipe_config] num_scalers: 0
>[    2.790387] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[    2.790388] [drm:intel_dump_pipe_config] scaler id: 0
>[    2.790390] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.790391] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.790392] [drm:intel_dump_pipe_config] ips: 1
>[    2.790393] [drm:intel_dump_pipe_config] double wide: 0
>[    2.790394] [drm:intel_dump_pipe_config] planes on this crtc
>[    2.790399] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[    2.790402] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258
>[    2.790402] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800
>[    2.790404] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    2.790406] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    2.827138] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
>[    2.827142] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
>[    2.827148] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    2.827152] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    2.827156] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[    2.827157] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[    2.827161] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[    2.827169] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[    2.827171] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[    2.827174] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff8802552aa900
>[    2.827176] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[    2.827178] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88009840c000 for pipe A
>[    2.827179] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    2.827180] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[    2.827183] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.827185] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[    2.827187] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    2.827188] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    2.827190] [drm:intel_dump_pipe_config] requested mode:
>[    2.827194] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    2.827194] [drm:intel_dump_pipe_config] adjusted mode:
>[    2.827197] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    2.827200] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[    2.827201] [drm:intel_dump_pipe_config] port clock: 540000
>[    2.827202] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[    2.827204] [drm:intel_dump_pipe_config] num_scalers: 0
>[    2.827205] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[    2.827205] [drm:intel_dump_pipe_config] scaler id: 0
>[    2.827207] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.827209] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.827210] [drm:intel_dump_pipe_config] ips: 1
>[    2.827211] [drm:intel_dump_pipe_config] double wide: 0
>[    2.827212] [drm:intel_dump_pipe_config] planes on this crtc
>[    2.827216] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[    2.827219] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258
>[    2.827219] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800
>[    2.827222] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    2.827223] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    2.930804] usb 1-7: new high-speed USB device number 4 using xhci_hcd
>[    2.935808] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    2.936009] ACPI: AC Adapter [ADP1] (on-line)
>[    2.956939] wmi: Mapper loaded
>[    2.966166] ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305f conflicts with OpRegion 0x0000000000003040-0x000000000000304f (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-258)
>[    2.966449] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    2.967215] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops update_polyphase_filter [i915])
>[    2.970847] input: PC Speaker as /devices/platform/pcspkr/input/input6
>[    2.971050] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    2.975804] [drm:intel_display_power_get] enabling display
>[    2.975813] [drm:hsw_set_power_well] Enabling power well
>[    2.991069] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC286: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[    2.991251] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    2.991383] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[    2.991512] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
>[    2.991623] snd_hda_codec_realtek hdaudioC1D0:    inputs:
>[    2.991709] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x18
>[    2.991758] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
>[    3.003012] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
>[    3.003016] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
>[    3.003022] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    3.003027] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    3.003030] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[    3.003032] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[    3.003037] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[    3.003044] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[    3.003046] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[    3.003051] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff880250290060
>[    3.003052] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[    3.003055] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880002c5e800 for pipe A
>[    3.003056] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    3.003057] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[    3.003059] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.003062] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[    3.003064] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    3.003065] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    3.003066] [drm:intel_dump_pipe_config] requested mode:
>[    3.003070] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    3.003071] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.003074] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    3.003077] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[    3.003078] [drm:intel_dump_pipe_config] port clock: 540000
>[    3.003079] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[    3.003080] [drm:intel_dump_pipe_config] num_scalers: 0
>[    3.003081] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[    3.003082] [drm:intel_dump_pipe_config] scaler id: 0
>[    3.003084] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.003086] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.003087] [drm:intel_dump_pipe_config] ips: 1
>[    3.003088] [drm:intel_dump_pipe_config] double wide: 0
>[    3.003088] [drm:intel_dump_pipe_config] planes on this crtc
>[    3.003093] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[    3.003097] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258
>[    3.003097] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800
>[    3.003099] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    3.003101] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    3.047995] dracut: Checking ext4: /dev/sda3
>[    3.048248] dracut: issuing e2fsck -a  /dev/sda3
>[    3.108152] Switched to clocksource tsc
>[    3.139352] usb 1-7: New USB device found, idVendor=5986, idProduct=0535
>[    3.139421] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>[    3.139484] usb 1-7: Product: Lenovo EasyCamera
>[    3.139526] usb 1-7: Manufacturer: Generic
>[    3.139565] usb 1-7: SerialNumber: 200901010001
>[    3.296120] usb 1-8: new full-speed USB device number 5 using xhci_hcd
>[    3.472243] usb 1-8: New USB device found, idVendor=048d, idProduct=8386
>[    3.472312] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.472376] usb 1-8: Product: ITE Device(8386)
>[    3.472413] usb 1-8: Manufacturer: ITE Tech. Inc.
>[    5.464422] iTCO_vendor_support: vendor-support=0
>[    5.464760] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    5.464897] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    5.465162] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    5.465698] dracut: /dev/sda3: clean, 705113/4751360 files, 14873964/19000576 blocks
>[    5.466620] dracut: Remounting /dev/sda3 with -o errors=remount-ro,ro
>[    5.468601] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    5.468758] ACPI: Battery Slot [BAT1] (battery present)
>[    5.469950] Linux video capture interface: v2.00
>[    5.473148] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0535)
>[    5.477184] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input7
>[    5.478074] usbcore: registered new interface driver uvcvideo
>[    5.478166] USB Video Class driver (1.1.1)
>[    5.481689] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
>[    5.489350] dracut: Mounted root filesystem /dev/sda3
>[    5.504389] device-mapper: uevent: version 1.0.3
>[    5.504612] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
>[    5.533038] dracut: Switching root
>[    5.586781] random: init urandom read with 82 bits of entropy available
>[    5.614702] init: plymouth-upstart-bridge main process (2508) terminated with status 1
>[    5.614837] init: plymouth-upstart-bridge main process ended, respawning
>[    5.621033] init: plymouth-upstart-bridge main process (2518) terminated with status 1
>[    5.621121] init: plymouth-upstart-bridge main process ended, respawning
>[    5.626964] init: plymouth-upstart-bridge main process (2520) terminated with status 1
>[    5.626979] init: plymouth-upstart-bridge main process ended, respawning
>[    5.636056] init: ureadahead main process (2511) terminated with status 5
>[    5.749521] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[    5.749534] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    5.824024] random: nonblocking pool is initialized
>[    5.842723] systemd-udevd[2637]: starting version 204
>[    6.038541] asix 1-1:1.0 eth3: renamed from eth0
>[    6.051788] systemd-udevd[3186]: renamed network interface eth0 to eth3
>[    6.079430] systemd-udevd[3190]: could not open moddep file '/lib/modules/4.0.0_drm-intel-testing-2015-04-23+/modules.dep.bin'
>[    6.086391] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
>[    6.086398] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
>[    6.086406] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    6.086413] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    6.086418] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[    6.086420] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[    6.086427] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[    6.086438] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[    6.086442] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[    6.086447] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff880252416600
>[    6.086450] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[    6.086453] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880002c5dc00 for pipe A
>[    6.086455] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    6.086457] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[    6.086461] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    6.086465] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[    6.086468] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    6.086470] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    6.086472] [drm:intel_dump_pipe_config] requested mode:
>[    6.086478] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    6.086479] [drm:intel_dump_pipe_config] adjusted mode:
>[    6.086484] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    6.086489] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[    6.086490] [drm:intel_dump_pipe_config] port clock: 540000
>[    6.086492] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[    6.086494] [drm:intel_dump_pipe_config] num_scalers: 0
>[    6.086495] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[    6.086497] [drm:intel_dump_pipe_config] scaler id: 0
>[    6.086500] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    6.086502] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    6.086504] [drm:intel_dump_pipe_config] ips: 1
>[    6.086505] [drm:intel_dump_pipe_config] double wide: 0
>[    6.086507] [drm:intel_dump_pipe_config] planes on this crtc
>[    6.086514] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[    6.086518] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258
>[    6.086518] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800
>[    6.086522] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    6.086525] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    6.141445] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
>[    6.141452] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
>[    6.141460] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    6.141466] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    6.141471] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[    6.141473] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[    6.141479] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[    6.141489] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[    6.141491] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[    6.141497] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff8802524162a0
>[    6.141499] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[    6.141502] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880002c5d400 for pipe A
>[    6.141504] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    6.141520] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[    6.141524] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    6.141527] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[    6.141530] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    6.141532] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    6.141534] [drm:intel_dump_pipe_config] requested mode:
>[    6.141540] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    6.141542] [drm:intel_dump_pipe_config] adjusted mode:
>[    6.141547] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    6.141552] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[    6.141554] [drm:intel_dump_pipe_config] port clock: 540000
>[    6.141556] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[    6.141557] [drm:intel_dump_pipe_config] num_scalers: 0
>[    6.141559] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[    6.141560] [drm:intel_dump_pipe_config] scaler id: 0
>[    6.141564] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    6.141566] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    6.141568] [drm:intel_dump_pipe_config] ips: 1
>[    6.141569] [drm:intel_dump_pipe_config] double wide: 0
>[    6.141571] [drm:intel_dump_pipe_config] planes on this crtc
>[    6.141578] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[    6.141582] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258
>[    6.141582] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800
>[    6.141586] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    6.141589] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    6.188954] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
>[    6.188960] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
>[    6.188969] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    6.188975] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    6.188980] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[    6.188982] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[    6.188989] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[    6.188999] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[    6.189002] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[    6.189007] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff880251a34c60
>[    6.189010] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[    6.189014] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88024f52e800 for pipe A
>[    6.189016] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    6.189018] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[    6.189022] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    6.189026] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[    6.189029] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    6.189031] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    6.189033] [drm:intel_dump_pipe_config] requested mode:
>[    6.189039] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    6.189040] [drm:intel_dump_pipe_config] adjusted mode:
>[    6.189046] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    6.189051] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[    6.189053] [drm:intel_dump_pipe_config] port clock: 540000
>[    6.189055] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[    6.189057] [drm:intel_dump_pipe_config] num_scalers: 0
>[    6.189059] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[    6.189061] [drm:intel_dump_pipe_config] scaler id: 0
>[    6.189064] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    6.189066] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    6.189068] [drm:intel_dump_pipe_config] ips: 1
>[    6.189070] [drm:intel_dump_pipe_config] double wide: 0
>[    6.189071] [drm:intel_dump_pipe_config] planes on this crtc
>[    6.189078] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[    6.189083] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258
>[    6.189083] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800
>[    6.189087] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    6.189090] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    6.241536] Adding 1952764k swap on /dev/sda2.  Priority:-1 extents:1 across:1952764k SS
>[    6.246901] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
>[    6.274137] [drm:i915_gem_open] 
>[    6.274263] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
>[    6.274272] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
>[    6.274280] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    6.274287] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    6.274294] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[    6.274298] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[    6.274306] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[    6.274318] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[    6.274323] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[    6.274329] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff880002e905a0
>[    6.274333] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[    6.274338] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88024feefc00 for pipe A
>[    6.274342] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    6.274345] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[    6.274350] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    6.274356] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[    6.274361] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    6.274364] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    6.274367] [drm:intel_dump_pipe_config] requested mode:
>[    6.274375] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    6.274378] [drm:intel_dump_pipe_config] adjusted mode:
>[    6.274384] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    6.274390] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[    6.274394] [drm:intel_dump_pipe_config] port clock: 540000
>[    6.274397] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[    6.274401] [drm:intel_dump_pipe_config] num_scalers: 0
>[    6.274404] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[    6.274407] [drm:intel_dump_pipe_config] scaler id: 0
>[    6.274412] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    6.274416] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    6.274420] [drm:intel_dump_pipe_config] ips: 1
>[    6.274423] [drm:intel_dump_pipe_config] double wide: 0
>[    6.274426] [drm:intel_dump_pipe_config] planes on this crtc
>[    6.274431] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[    6.274436] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258<7>[    6.274442] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800
>[    6.274448] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    6.274453] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    6.274461] [drm:intel_crtc_set_config] [CRTC:24] [NOFB]
>[    6.274467] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0
>[    6.274474] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    6.274480] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[    6.274486] [drm:intel_crtc_set_config] [CRTC:28] [NOFB]
>[    6.274491] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0
>[    6.274496] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    6.274501] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[    6.274525] [drm:i915_gem_open] 
>[    6.274616] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
>[    6.274622] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
>[    6.274628] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    6.274633] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    6.274638] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[    6.274642] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[    6.274647] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[    6.274658] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[    6.274662] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[    6.274667] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff880002e905a0
>[    6.274671] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[    6.274676] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88024feefc00 for pipe A
>[    6.274679] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    6.274682] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[    6.274687] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    6.274693] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[    6.274697] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    6.274701] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    6.274704] [drm:intel_dump_pipe_config] requested mode:
>[    6.274711] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    6.274715] [drm:intel_dump_pipe_config] adjusted mode:
>[    6.274721] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    6.274728] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[    6.274732] [drm:intel_dump_pipe_config] port clock: 540000
>[    6.274735] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[    6.274739] [drm:intel_dump_pipe_config] num_scalers: 0
>[    6.274743] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[    6.274746] [drm:intel_dump_pipe_config] scaler id: 0
>[    6.274751] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    6.274755] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    6.274759] [drm:intel_dump_pipe_config] ips: 1
>[    6.274762] [drm:intel_dump_pipe_config] double wide: 0
>[    6.274765] [drm:intel_dump_pipe_config] planes on this crtc
>[    6.274770] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[    6.274774] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258<7>[    6.274780] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800
>[    6.274785] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    6.274790] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    6.274796] [drm:intel_crtc_set_config] [CRTC:24] [NOFB]
>[    6.274801] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0
>[    6.274816] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    6.274821] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[    6.274826] [drm:intel_crtc_set_config] [CRTC:28] [NOFB]
>[    6.274831] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0
>[    6.274836] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    6.274841] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[    6.274864] [drm:i915_gem_open] 
>[    6.274941] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[    6.274948] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[2] ENCODERS[2]
>[    6.274960] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[    6.274965] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1]
>[    6.274969] [drm:intel_dp_detect] [CONNECTOR:31:eDP-1]
>[    6.274978] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    6.274989] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    6.275839] [drm:intel_dp_probe_oui] Sink OUI: 0022b9
>[    6.276178] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    6.276197] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    6.276206] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:31:eDP-1] probed modes :
>[    6.276214] [drm:drm_mode_debug_printmodeline] Modeline 32:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    6.276221] [drm:drm_mode_debug_printmodeline] Modeline 33:"3200x1800" 48 361310 3200 3248 3280 3680 1800 1802 1807 2045 0x40 0xa
>[    6.276231] [drm:drm_mode_getconnector] [CONNECTOR:31:?]
>[    6.315566] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
>[    6.315575] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1]
>[    6.315580] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
>[    6.316257] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    6.316264] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    6.316270] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1] disconnected
>[    6.316280] [drm:drm_mode_getconnector] [CONNECTOR:40:?]
>[    6.316284] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1]
>[    6.316287] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
>[    6.316454] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    6.316458] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    6.316462] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:40:HDMI-A-1] disconnected
>[    6.316500] [drm:drm_mode_addfb2] [FB:44]
>[    6.664225] init: bluetooth main process (3452) terminated with status 1
>[    6.664241] init: bluetooth main process ended, respawning
>[    6.874273] init: bluetooth main process (3534) terminated with status 1
>[    6.874299] init: bluetooth main process ended, respawning
>[    7.147642] init: bluetooth main process (3689) terminated with status 1
>[    7.147670] init: bluetooth main process ended, respawning
>[    7.426721] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
>[    7.426732] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
>[    7.426740] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    7.426749] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    7.426755] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[    7.426759] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[    7.426767] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[    7.426778] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[    7.426783] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[    7.426789] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff880002e91a80
>[    7.426793] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[    7.426798] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880254825c00 for pipe A
>[    7.426802] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    7.426805] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[    7.426811] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    7.426816] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[    7.426821] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    7.426825] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    7.426828] [drm:intel_dump_pipe_config] requested mode:
>[    7.426836] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    7.426839] [drm:intel_dump_pipe_config] adjusted mode:
>[    7.426846] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    7.426853] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[    7.426856] [drm:intel_dump_pipe_config] port clock: 540000
>[    7.426860] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[    7.426863] [drm:intel_dump_pipe_config] num_scalers: 0
>[    7.426867] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[    7.426870] [drm:intel_dump_pipe_config] scaler id: 0
>[    7.426875] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    7.426879] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    7.426882] [drm:intel_dump_pipe_config] ips: 1
>[    7.426886] [drm:intel_dump_pipe_config] double wide: 0
>[    7.426889] [drm:intel_dump_pipe_config] planes on this crtc
>[    7.426894] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[    7.426899] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258<7>[    7.426905] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800
>[    7.426910] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    7.426915] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    7.426922] [drm:intel_crtc_set_config] [CRTC:24] [NOFB]
>[    7.426927] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:24], mode_changed=0, fb_changed=0
>[    7.426933] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    7.426938] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[    7.426944] [drm:intel_crtc_set_config] [CRTC:28] [NOFB]
>[    7.426949] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:28], mode_changed=0, fb_changed=0
>[    7.426954] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    7.426959] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[    7.427018] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
>[    7.427022] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
>[    7.427026] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[    7.427030] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    7.427033] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[    7.427035] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[    7.427039] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[    7.427047] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[    7.427049] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[    7.427052] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff880002e91a80
>[    7.427055] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[    7.427057] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880254825c00 for pipe A
>[    7.427059] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    7.427061] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[    7.427064] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    7.427068] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[    7.427071] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    7.427073] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    7.427074] [drm:intel_dump_pipe_config] requested mode:
>[    7.427080] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    7.427081] [drm:intel_dump_pipe_config] adjusted mode:
>[    7.427086] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[    7.427090] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[    7.427092] [drm:intel_dump_pipe_config] port clock: 540000
>[    7.427094] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[    7.427096] [drm:intel_dump_pipe_config] num_scalers: 0
>[    7.427097] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[    7.427099] [drm:intel_dump_pipe_config] scaler id: 0
>[    7.427101] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    7.427104] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    7.427105] [drm:intel_dump_pipe_config] ips: 1
>[    7.427107] [drm:intel_dump_pipe_config] double wide: 0
>[    7.427108] [drm:intel_dump_pipe_config] planes on this crtc
>[    7.427114] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[    7.427118] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258
>[    7.427119] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800
>[    7.427122] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    7.427124] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    7.445018] init: bluetooth main process (3876) terminated with status 1
>[    7.445036] init: bluetooth main process ended, respawning
>[    7.474845] init: plymouth-upstart-bridge main process ended, respawning
>[    7.477894] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
>[    7.558527] init: bluetooth main process (3916) terminated with status 1
>[    7.558551] init: bluetooth main process ended, respawning
>[    7.596079] init: bluetooth main process (3942) terminated with status 1
>[    7.596102] init: bluetooth main process ended, respawning
>[    7.625225] init: bluetooth main process (3966) terminated with status 1
>[    7.625241] init: bluetooth main process ended, respawning
>[    7.661469] init: bluetooth main process (3990) terminated with status 1
>[    7.661585] init: bluetooth main process ended, respawning
>[    7.689441] init: bluetooth main process (4020) terminated with status 1
>[    7.689457] init: bluetooth main process ended, respawning
>[    7.713982] init: bluetooth main process (4044) terminated with status 1
>[    7.713998] init: bluetooth main process ended, respawning
>[    7.737657] init: bluetooth main process (4068) terminated with status 1
>[    7.737672] init: bluetooth respawning too fast, stopped
>[    7.865191] asix 1-1:1.0 eth3: link down
>[    9.287781] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[    9.287792] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    9.658644] asix 1-1:1.0 eth3: link up, 100Mbps, full-duplex, lpa 0x45E1
>[   83.034352] PM: Syncing filesystems ... done.
>[   83.041421] PM: Preparing system for mem sleep
>[   83.041607] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[   83.042935] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[   83.044189] PM: Entering mem sleep
>[   83.044216] Suspending console(s) (use no_console_suspend to debug)
>[   83.044716] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[   83.046607] sd 0:0:0:0: [sda] Stopping disk
>[   83.095282] [drm:intel_edp_backlight_off] 
>[   83.296100] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[   83.310917] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[   83.310926] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[   83.311109] [drm:edp_panel_off] Turn eDP port A panel power off
>[   83.311114] [drm:wait_panel_off] Wait for panel power off time
>[   83.311119] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[   83.371494] [drm:wait_panel_status] Wait complete
>[   83.375713] [drm:intel_display_power_put] disabling display
>[   83.375717] [drm:hsw_set_power_well] Requesting to disable the power well
>[   83.375718] [drm:intel_display_power_put] disabling always-on
>[   83.375810] PM: suspend of devices complete after 331.214 msecs
>[   83.376232] [drm:hsw_enable_pc8] Enabling package C8+
>[   83.393211] PM: late suspend of devices complete after 17.383 msecs
>[   83.393947] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>[   83.404090] PM: noirq suspend of devices complete after 10.868 msecs
>[   83.404752] ACPI: Preparing to enter system sleep state S3
>[   83.434350] PM: Saving platform NVS memory
>[   83.434390] Disabling non-boot CPUs ...
>[   83.436286] smpboot: CPU 1 is now offline
>[   83.437802] smpboot: CPU 2 is now offline
>[   83.438528] Broke affinity for irq 42
>[   83.439568] smpboot: CPU 3 is now offline
>[   83.442593] ACPI: Low-level resume complete
>[   83.442671] PM: Restoring platform NVS memory
>[   83.443099] CPU0: Thermal LVT vector (0xfa) already installed
>[   83.443130] Enabling non-boot CPUs ...
>[   83.443177] x86: Booting SMP configuration:
>[   83.443179] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[   83.454358] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[   83.454359] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[   83.456120] CPU1: Thermal LVT vector (0xfa) already installed
>[   83.458863] CPU1 is up
>[   83.458893] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[   83.471801] CPU2: Thermal LVT vector (0xfa) already installed
>[   83.474582] CPU2 is up
>[   83.474614] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[   83.487540] CPU3: Thermal LVT vector (0xfa) already installed
>[   83.490316] CPU3 is up
>[   83.497015] ACPI: Waking up from system sleep state S3
>[   86.017513] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
>[   86.028028] PM: noirq resume of devices complete after 10.733 msecs
>[   86.028143] [drm:hsw_disable_pc8] Disabling package C8+
>[   86.034569] [drm:intel_display_power_get] enabling always-on
>[   86.034571] [drm:intel_display_power_get] enabling display
>[   86.034627] PM: early resume of devices complete after 6.570 msecs
>[   86.035117] rtc_cmos 00:02: System wakeup disabled by ACPI
>[   86.036550] sd 0:0:0:0: [sda] Starting disk
>[   86.036964] [drm:intel_opregion_setup] graphic opregion physical addr: 0x9cf73018
>[   86.036982] [drm:intel_opregion_setup] Public ACPI methods supported
>[   86.036983] [drm:intel_opregion_setup] SWSCI supported
>[   86.073346] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700583
>[   86.073348] [drm:intel_opregion_setup] ASLE supported
>[   86.079567] [drm:gen8_init_common_ring] Execlists enabled for render ring
>[   86.079574] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
>[   86.079577] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
>[   86.079581] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
>[   86.079725] [drm:intel_modeset_readout_hw_state] [CRTC:20] hw state readout: disabled
>[   86.079728] [drm:intel_modeset_readout_hw_state] [CRTC:24] hw state readout: disabled
>[   86.079730] [drm:intel_modeset_readout_hw_state] [CRTC:28] hw state readout: disabled
>[   86.079733] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[   86.079735] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[   86.079738] [drm:intel_modeset_readout_hw_state] [ENCODER:30:TMDS-30] hw state readout: disabled, pipe A
>[   86.079740] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A
>[   86.079743] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:eDP-1] hw state readout: disabled
>[   86.079746] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:HDMI-A-1] hw state readout: disabled
>[   86.079750] [drm:intel_dump_pipe_config] [CRTC:20][setup_hw_state] config ffff88025489ec00 for pipe A
>[   86.079751] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[   86.079752] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[   86.079755] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   86.079757] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   86.079759] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   86.079760] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[   86.079761] [drm:intel_dump_pipe_config] requested mode:
>[   86.079765] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   86.079766] [drm:intel_dump_pipe_config] adjusted mode:
>[   86.079769] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   86.079772] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   86.079773] [drm:intel_dump_pipe_config] port clock: 0
>[   86.079774] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[   86.079775] [drm:intel_dump_pipe_config] num_scalers: 0
>[   86.079776] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[   86.079777] [drm:intel_dump_pipe_config] scaler id: 0
>[   86.079779] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   86.079781] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   86.079782] [drm:intel_dump_pipe_config] ips: 0
>[   86.079783] [drm:intel_dump_pipe_config] double wide: 0
>[   86.079784] [drm:intel_dump_pipe_config] planes on this crtc
>[   86.079788] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[   86.079792] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258
>[   86.079792] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800
>[   86.079794] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[   86.079796] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[   86.079813] [drm:intel_dump_pipe_config] [CRTC:24][setup_hw_state] config ffff88009852d400 for pipe B
>[   86.079814] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[   86.079816] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[   86.079818] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   86.079821] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   86.079824] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   86.079825] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[   86.079827] [drm:intel_dump_pipe_config] requested mode:
>[   86.079831] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   86.079832] [drm:intel_dump_pipe_config] adjusted mode:
>[   86.079836] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   86.079839] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   86.079840] [drm:intel_dump_pipe_config] port clock: 0
>[   86.079841] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[   86.079842] [drm:intel_dump_pipe_config] num_scalers: 0
>[   86.079844] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[   86.079845] [drm:intel_dump_pipe_config] scaler id: 0
>[   86.079846] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   86.079848] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   86.079849] [drm:intel_dump_pipe_config] ips: 0
>[   86.079850] [drm:intel_dump_pipe_config] double wide: 0
>[   86.079851] [drm:intel_dump_pipe_config] planes on this crtc
>[   86.079853] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 1.0 idx: 3 disabled, scaler_id = -1
>[   86.079855] [drm:intel_dump_pipe_config] CURSOR PLANE:23 plane: 1.2 idx: 4 disabled, scaler_id = -1
>[   86.079857] [drm:intel_dump_pipe_config] STANDARD PLANE:25 plane: 1.1 idx: 5 disabled, scaler_id = 0
>[   86.079860] [drm:intel_dump_pipe_config] [CRTC:28][setup_hw_state] config ffff88009852e400 for pipe C
>[   86.079861] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[   86.079862] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[   86.079864] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   86.079866] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   86.079868] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   86.079869] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[   86.079870] [drm:intel_dump_pipe_config] requested mode:
>[   86.079872] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   86.079873] [drm:intel_dump_pipe_config] adjusted mode:
>[   86.079875] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   86.079878] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   86.079879] [drm:intel_dump_pipe_config] port clock: 0
>[   86.079880] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[   86.079881] [drm:intel_dump_pipe_config] num_scalers: 0
>[   86.079882] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[   86.079883] [drm:intel_dump_pipe_config] scaler id: 0
>[   86.079885] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   86.079886] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   86.079887] [drm:intel_dump_pipe_config] ips: 0
>[   86.079888] [drm:intel_dump_pipe_config] double wide: 0
>[   86.079889] [drm:intel_dump_pipe_config] planes on this crtc
>[   86.079891] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 2.0 idx: 6 disabled, scaler_id = -1
>[   86.079892] [drm:intel_dump_pipe_config] CURSOR PLANE:27 plane: 2.3 idx: 7 disabled, scaler_id = -1
>[   86.079894] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 2.1 idx: 8 disabled, scaler_id = 0
>[   86.079905] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   86.079910] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[   86.079911] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[   86.079916] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[   86.079923] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[   86.079924] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[   86.079927] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff880251a34660
>[   86.079929] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[   86.079931] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88009840a400 for pipe A
>[   86.079932] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[   86.079933] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[   86.079935] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   86.079938] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[   86.079940] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   86.079941] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[   86.079942] [drm:intel_dump_pipe_config] requested mode:
>[   86.079945] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[   86.079946] [drm:intel_dump_pipe_config] adjusted mode:
>[   86.079949] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[   86.079952] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[   86.079953] [drm:intel_dump_pipe_config] port clock: 540000
>[   86.079954] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[   86.079955] [drm:intel_dump_pipe_config] num_scalers: 0
>[   86.079956] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[   86.079957] [drm:intel_dump_pipe_config] scaler id: 0
>[   86.079959] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   86.079960] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   86.079961] [drm:intel_dump_pipe_config] ips: 1
>[   86.079962] [drm:intel_dump_pipe_config] double wide: 0
>[   86.079963] [drm:intel_dump_pipe_config] planes on this crtc
>[   86.079967] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[   86.079969] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258
>[   86.079969] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 3200x1800 dst (0, 0) 3200x1800
>[   86.079971] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[   86.079973] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[   86.080004] [drm:edp_panel_on] Turn eDP port A panel power on
>[   86.080006] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[   86.080010] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[   86.080012] [drm:wait_panel_status] Wait complete
>[   86.080016] [drm:wait_panel_on] Wait for panel power on
>[   86.080020] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[   86.281159] [drm:wait_panel_status] Wait complete
>[   86.281169] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[   86.281177] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[   86.282261] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[   86.282263] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[   86.282265] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[   86.282888] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[   86.282889] [drm:intel_dp_set_signal_levels] Using vswing level 1
>[   86.282891] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[   86.283503] [drm:intel_dp_start_link_train] clock recovery OK
>[   86.284425] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
>[   86.284427] [drm:intel_dp_set_signal_levels] Using vswing level 1
>[   86.284428] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1
>[   86.285342] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[   86.285630] [drm:intel_edp_backlight_on] 
>[   86.285633] [drm:intel_panel_enable_backlight] pipe A
>[   86.285639] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[   86.285646] [drm:intel_psr_match_conditions] PSR disable by flag
>[   86.285647] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
>[   86.318988] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
>[   86.318992] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
>[   86.318994] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
>[   86.318996] [drm:check_crtc_state] [CRTC:20]
>[   86.319007] [drm:check_crtc_state] [CRTC:24]
>[   86.319010] [drm:check_crtc_state] [CRTC:28]
>[   86.319012] [drm:check_shared_dpll_state] WRPLL 1
>[   86.319014] [drm:check_shared_dpll_state] WRPLL 2
>[   86.319024] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[   86.319034] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
>[   86.319036] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
>[   86.319038] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
>[   86.319039] [drm:check_crtc_state] [CRTC:20]
>[   86.319047] [drm:check_crtc_state] [CRTC:24]
>[   86.319049] [drm:check_crtc_state] [CRTC:28]
>[   86.319050] [drm:check_shared_dpll_state] WRPLL 1
>[   86.319052] [drm:check_shared_dpll_state] WRPLL 2
>[   86.319056] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[   86.319060] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
>[   86.319062] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
>[   86.319064] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
>[   86.319065] [drm:check_crtc_state] [CRTC:20]
>[   86.319073] [drm:check_crtc_state] [CRTC:24]
>[   86.319075] [drm:check_crtc_state] [CRTC:28]
>[   86.319078] [drm:check_shared_dpll_state] WRPLL 1
>[   86.319079] [drm:check_shared_dpll_state] WRPLL 2
>[   86.319082] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
>[   86.319084] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
>[   86.319086] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
>[   86.319087] [drm:check_crtc_state] [CRTC:20]
>[   86.319095] [drm:check_crtc_state] [CRTC:24]
>[   86.319097] [drm:check_crtc_state] [CRTC:28]
>[   86.319098] [drm:check_shared_dpll_state] WRPLL 1
>[   86.319101] [drm:check_shared_dpll_state] WRPLL 2
>[   86.323470] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
>[   86.323473] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
>[   86.323477] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[   86.323480] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   86.323483] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[   86.323484] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[   86.323489] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[   86.323497] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[   86.323498] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[   86.323501] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff880251ff5ba0
>[   86.323503] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[   86.323505] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88024fd22c00 for pipe A
>[   86.323506] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[   86.323508] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[   86.323510] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   86.323513] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[   86.323514] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   86.323516] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[   86.323517] [drm:intel_dump_pipe_config] requested mode:
>[   86.323521] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[   86.323522] [drm:intel_dump_pipe_config] adjusted mode:
>[   86.323525] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[   86.323527] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[   86.323529] [drm:intel_dump_pipe_config] port clock: 540000
>[   86.323530] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[   86.323531] [drm:intel_dump_pipe_config] num_scalers: 0
>[   86.323532] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[   86.323533] [drm:intel_dump_pipe_config] scaler id: 0
>[   86.323535] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   86.323536] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   86.323538] [drm:intel_dump_pipe_config] ips: 1
>[   86.323539] [drm:intel_dump_pipe_config] double wide: 0
>[   86.323539] [drm:intel_dump_pipe_config] planes on this crtc
>[   86.323544] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[   86.323547] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258
>[   86.323547] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 0x0 dst (0, 0) 0x0
>[   86.323549] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[   86.323551] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[   86.339978] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[   86.341982] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
>[   86.342244] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[   86.342539] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
>[   86.342716] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[   86.342775] ata1.00: configured for UDMA/133
>[   86.427423] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
>[   86.744617] usb 1-1: reset high-speed USB device number 2 using xhci_hcd
>[   86.919471] asix 1-1:1.0 eth3: unregister 'asix' usb-0000:00:14.0-1, ASIX AX88772B USB 2.0 Ethernet
>[   87.065863] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
>[   87.384007] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
>[   87.599594] PM: resume of devices complete after 1564.003 msecs
>[   87.812902] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[   88.363849] asix 1-1:1.0 eth0: register 'asix' at usb-0000:00:14.0-1, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:73:43
>[   88.364325] PM: Finishing wakeup.
>[   88.364327] Restarting tasks ... done.
>[   88.368909] asix 1-1:1.0 eth3: renamed from eth0
>[   88.377392] systemd-udevd[4428]: renamed network interface eth0 to eth3
>[   89.291891] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[   89.291902] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   92.921817] asix 1-1:1.0 eth3: link up, 100Mbps, full-duplex, lpa 0x45E1
>[  103.046553] PM: Syncing filesystems ... done.
>[  103.068225] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[  103.069548] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[  103.069552] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
>[  103.069558] PM: Marking nosave pages: [mem 0x96f7a000-0x97879fff]
>[  103.069628] PM: Marking nosave pages: [mem 0x9c98f000-0x9cffefff]
>[  103.069677] PM: Marking nosave pages: [mem 0x9d000000-0xffffffff]
>[  103.071522] PM: Basic memory bitmaps created
>[  103.072203] PM: Preallocating image memory... done (allocated 97319 pages)
>[  103.368559] PM: Allocated 389276 kbytes in 0.29 seconds (1342.33 MB/s)
>[  103.368562] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[  103.369957] Suspending console(s) (use no_console_suspend to debug)
>[  103.370548] ------------[ cut here ]------------
>[  103.370591] WARNING: CPU: 0 PID: 4413 at drivers/gpu/drm/i915/i915_gem.c:4648 i915_gem_suspend+0xbb/0xd3 [i915]()
>[  103.370595] WARN_ON(dev_priv->mm.busy)
>[  103.370613] Modules linked in: dm_mod uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev iTCO_wdt iTCO_vendor_support snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi pcspkr snd_hda_intel i2c_i801 snd_hda_controller snd_hda_codec snd_hda_core snd_hwdep lpc_ich snd_pcm mfd_core snd_timer snd soundcore wmi battery ac acpi_cpufreq i915 button video drm_kms_helper drm
>[  103.370617] CPU: 0 PID: 4413 Comm: kworker/u16:44 Not tainted 4.0.0_drm-intel-testing-2015-04-23+ #412
>[  103.370618] Hardware name: LENOVO 80HE/VIUU4, BIOS A6CN38WW 09/30/2014
>[  103.370626] Workqueue: events_unbound async_run_entry_fn
>[  103.370629]  0000000000000000 0000000000000009 ffffffff81795847 ffff8802540a3c88
>[  103.370632]  ffffffff8103bd5a 0000000000000086 ffffffffa009ed31 000000000000009d
>[  103.370634]  0000000000000000 ffff880098770000 ffff8802552dd060 ffff880098770000
>[  103.370635] Call Trace:
>[  103.370642]  [<ffffffff81795847>] ? dump_stack+0x40/0x50
>[  103.370646]  [<ffffffff8103bd5a>] ? warn_slowpath_common+0x98/0xb0
>[  103.370667]  [<ffffffffa009ed31>] ? i915_gem_suspend+0xbb/0xd3 [i915]
>[  103.370673]  [<ffffffff8103bdb7>] ? warn_slowpath_fmt+0x45/0x4a
>[  103.370699]  [<ffffffffa009ed31>] ? i915_gem_suspend+0xbb/0xd3 [i915]
>[  103.370704]  [<ffffffff8135f901>] ? pci_pm_poweroff+0xbc/0xbc
>[  103.370720]  [<ffffffffa007b789>] ? i915_drm_suspend+0x59/0x1a1 [i915]
>[  103.370724]  [<ffffffff8135f901>] ? pci_pm_poweroff+0xbc/0xbc
>[  103.370727]  [<ffffffff8135f983>] ? pci_pm_freeze+0x82/0xa4
>[  103.370731]  [<ffffffff813f21a9>] ? dpm_run_callback+0x3a/0xc5
>[  103.370733]  [<ffffffff813f2b17>] ? __device_suspend+0x1d1/0x25d
>[  103.370736]  [<ffffffff813f2bb9>] ? async_suspend+0x16/0x7d
>[  103.370740]  [<ffffffff81052783>] ? async_run_entry_fn+0x2d/0xbf
>[  103.370745]  [<ffffffff8104ca7f>] ? process_one_work+0x1b2/0x31d
>[  103.370749]  [<ffffffff8104d278>] ? worker_thread+0x24d/0x339
>[  103.370753]  [<ffffffff8104d02b>] ? cancel_delayed_work_sync+0xa/0xa
>[  103.370756]  [<ffffffff81050b25>] ? kthread+0xce/0xd6
>[  103.370759]  [<ffffffff81050a57>] ? kthread_create_on_node+0x162/0x162
>[  103.370762]  [<ffffffff8179b048>] ? ret_from_fork+0x58/0x90
>[  103.370765]  [<ffffffff81050a57>] ? kthread_create_on_node+0x162/0x162
>[  103.370767] ---[ end trace 20a890d00eceb6cb ]---
>[  103.381453] [drm:intel_edp_backlight_off] 
>[  103.582545] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  103.596728] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[  103.596736] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  103.596894] [drm:edp_panel_off] Turn eDP port A panel power off
>[  103.596899] [drm:wait_panel_off] Wait for panel power off time
>[  103.596903] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  103.657278] [drm:wait_panel_status] Wait complete
>[  103.661538] [drm:intel_display_power_put] disabling display
>[  103.661542] [drm:hsw_set_power_well] Requesting to disable the power well
>[  103.661543] [drm:intel_display_power_put] disabling always-on
>[  103.661636] PM: freeze of devices complete after 291.493 msecs
>[  103.661957] [drm:hsw_enable_pc8] Enabling package C8+
>[  103.678747] PM: late freeze of devices complete after 17.094 msecs
>[  103.679477] PM: noirq freeze of devices complete after 0.724 msecs
>[  103.680166] ACPI: Preparing to enter system sleep state S4
>[  103.709860] PM: Saving platform NVS memory
>[  103.719515] Disabling non-boot CPUs ...
>[  103.721430] smpboot: CPU 1 is now offline
>[  103.722927] smpboot: CPU 2 is now offline
>[  103.723682] Broke affinity for irq 42
>[  103.724710] smpboot: CPU 3 is now offline
>[  103.725147] PM: Creating hibernation image:
>[  103.981168] PM: Need to copy 96320 pages
>[  103.981170] PM: Normal pages needed: 96320 + 1024, available pages: 1980235
>[  103.726851] PM: Restoring platform NVS memory
>[  103.729837] CPU0: Thermal LVT vector (0xfa) already installed
>[  103.729853] Enabling non-boot CPUs ...
>[  103.729891] x86: Booting SMP configuration:
>[  103.729892] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[  103.742820] CPU1: Thermal LVT vector (0xfa) already installed
>[  103.745583] CPU1 is up
>[  103.745615] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[  103.758525] CPU2: Thermal LVT vector (0xfa) already installed
>[  103.761294] CPU2 is up
>[  103.761325] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[  103.774261] CPU3: Thermal LVT vector (0xfa) already installed
>[  103.777038] CPU3 is up
>[  103.786442] ACPI: Waking up from system sleep state S4
>[  103.806562] PM: noirq restore of devices complete after 10.612 msecs
>[  103.806646] [drm:hsw_disable_pc8] Disabling package C8+
>[  103.815115] [drm:intel_display_power_get] enabling always-on
>[  103.815117] [drm:intel_display_power_get] enabling display
>[  103.815120] [drm:hsw_set_power_well] Enabling power well
>[  103.817219] PM: early restore of devices complete after 10.625 msecs
>[  103.868513] usb usb1: root hub lost power or was reset
>[  103.868517] usb usb2: root hub lost power or was reset
>[  103.868987] rtc_cmos 00:02: System wakeup disabled by ACPI
>[  103.869357] sd 0:0:0:0: [sda] Starting disk
>[  103.870431] [drm:intel_opregion_setup] graphic opregion physical addr: 0x9cf73018
>[  103.870448] [drm:intel_opregion_setup] Public ACPI methods supported
>[  103.870449] [drm:intel_opregion_setup] SWSCI supported
>[  103.876494] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00700583
>[  103.876495] [drm:intel_opregion_setup] ASLE supported
>[  103.882579] [drm:gen8_init_common_ring] Execlists enabled for render ring
>[  103.882584] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
>[  103.882588] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
>[  103.882591] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
>[  103.882716] [drm:intel_modeset_readout_hw_state] [CRTC:20] hw state readout: disabled
>[  103.882719] [drm:intel_modeset_readout_hw_state] [CRTC:24] hw state readout: disabled
>[  103.882721] [drm:intel_modeset_readout_hw_state] [CRTC:28] hw state readout: disabled
>[  103.882724] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[  103.882726] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[  103.882729] [drm:intel_modeset_readout_hw_state] [ENCODER:30:TMDS-30] hw state readout: disabled, pipe A
>[  103.882731] [drm:intel_modeset_readout_hw_state] [ENCODER:39:TMDS-39] hw state readout: disabled, pipe A
>[  103.882733] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:eDP-1] hw state readout: disabled
>[  103.882736] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:HDMI-A-1] hw state readout: disabled
>[  103.882740] [drm:intel_dump_pipe_config] [CRTC:20][setup_hw_state] config ffff88009840b800 for pipe A
>[  103.882741] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  103.882742] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  103.882745] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  103.882747] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  103.882749] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  103.882750] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  103.882751] [drm:intel_dump_pipe_config] requested mode:
>[  103.882754] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  103.882755] [drm:intel_dump_pipe_config] adjusted mode:
>[  103.882758] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  103.882761] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  103.882762] [drm:intel_dump_pipe_config] port clock: 0
>[  103.882763] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  103.882764] [drm:intel_dump_pipe_config] num_scalers: 0
>[  103.882765] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[  103.882766] [drm:intel_dump_pipe_config] scaler id: 0
>[  103.882768] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  103.882770] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  103.882771] [drm:intel_dump_pipe_config] ips: 0
>[  103.882772] [drm:intel_dump_pipe_config] double wide: 0
>[  103.882773] [drm:intel_dump_pipe_config] planes on this crtc
>[  103.882777] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[  103.882780] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258
>[  103.882780] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 0x0 dst (0, 0) 0x0
>[  103.882783] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[  103.882785] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  103.882788] [drm:intel_dump_pipe_config] [CRTC:24][setup_hw_state] config ffff88024fd23400 for pipe B
>[  103.882789] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[  103.882790] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  103.882793] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  103.882795] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  103.882797] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  103.882798] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  103.882799] [drm:intel_dump_pipe_config] requested mode:
>[  103.882802] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  103.882803] [drm:intel_dump_pipe_config] adjusted mode:
>[  103.882805] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  103.882808] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  103.882809] [drm:intel_dump_pipe_config] port clock: 0
>[  103.882810] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  103.882811] [drm:intel_dump_pipe_config] num_scalers: 0
>[  103.882812] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[  103.882813] [drm:intel_dump_pipe_config] scaler id: 0
>[  103.882815] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  103.882816] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  103.882817] [drm:intel_dump_pipe_config] ips: 0
>[  103.882818] [drm:intel_dump_pipe_config] double wide: 0
>[  103.882819] [drm:intel_dump_pipe_config] planes on this crtc
>[  103.882821] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 1.0 idx: 3 disabled, scaler_id = -1
>[  103.882823] [drm:intel_dump_pipe_config] CURSOR PLANE:23 plane: 1.2 idx: 4 disabled, scaler_id = -1
>[  103.882825] [drm:intel_dump_pipe_config] STANDARD PLANE:25 plane: 1.1 idx: 5 disabled, scaler_id = 0
>[  103.882827] [drm:intel_dump_pipe_config] [CRTC:28][setup_hw_state] config ffff88024fd27400 for pipe C
>[  103.882828] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[  103.882829] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[  103.882832] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  103.882833] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  103.882835] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  103.882837] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  103.882838] [drm:intel_dump_pipe_config] requested mode:
>[  103.882840] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  103.882841] [drm:intel_dump_pipe_config] adjusted mode:
>[  103.882843] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  103.882846] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  103.882847] [drm:intel_dump_pipe_config] port clock: 0
>[  103.882848] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[  103.882849] [drm:intel_dump_pipe_config] num_scalers: 0
>[  103.882850] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[  103.882851] [drm:intel_dump_pipe_config] scaler id: 0
>[  103.882853] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  103.882854] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  103.882855] [drm:intel_dump_pipe_config] ips: 0
>[  103.882856] [drm:intel_dump_pipe_config] double wide: 0
>[  103.882857] [drm:intel_dump_pipe_config] planes on this crtc
>[  103.882859] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 2.0 idx: 6 disabled, scaler_id = -1
>[  103.882861] [drm:intel_dump_pipe_config] CURSOR PLANE:27 plane: 2.3 idx: 7 disabled, scaler_id = -1
>[  103.882862] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 2.1 idx: 8 disabled, scaler_id = 0
>[  103.882873] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  103.882876] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[  103.882878] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[  103.882882] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[  103.882890] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[  103.882891] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[  103.882894] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff8802501f5900
>[  103.882896] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[  103.882898] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff88025489fc00 for pipe A
>[  103.882899] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[  103.882900] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[  103.882902] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  103.882905] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[  103.882906] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  103.882908] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  103.882909] [drm:intel_dump_pipe_config] requested mode:
>[  103.882912] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[  103.882913] [drm:intel_dump_pipe_config] adjusted mode:
>[  103.882916] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[  103.882919] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[  103.882920] [drm:intel_dump_pipe_config] port clock: 540000
>[  103.882921] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[  103.882922] [drm:intel_dump_pipe_config] num_scalers: 0
>[  103.882923] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[  103.882924] [drm:intel_dump_pipe_config] scaler id: 0
>[  103.882926] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  103.882927] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  103.882928] [drm:intel_dump_pipe_config] ips: 1
>[  103.882929] [drm:intel_dump_pipe_config] double wide: 0
>[  103.882930] [drm:intel_dump_pipe_config] planes on this crtc
>[  103.882934] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[  103.882936] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258
>[  103.882936] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 0x0 dst (0, 0) 0x0
>[  103.882938] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[  103.882940] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  103.882969] [drm:edp_panel_on] Turn eDP port A panel power on
>[  103.882971] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  104.173735] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  104.175726] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
>[  104.175885] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[  104.176161] ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
>[  104.176316] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
>[  104.176352] ata1.00: configured for UDMA/133
>[  104.202750] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control abcd0000
>[  104.234854] usb 1-1: reset high-speed USB device number 2 using xhci_hcd
>[  104.408454] asix 1-1:1.0 eth3: unregister 'asix' usb-0000:00:14.0-1, ASIX AX88772B USB 2.0 Ethernet
>[  104.419915] [drm:wait_panel_status] Wait complete
>[  104.419920] [drm:wait_panel_on] Wait for panel power on
>[  104.419925] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[  104.554045] usb 1-8: reset full-speed USB device number 5 using xhci_hcd
>[  104.633231] [drm:wait_panel_status] Wait complete
>[  104.633238] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[  104.633246] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  104.634316] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[  104.634318] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  104.634320] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  104.634938] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[  104.634940] [drm:intel_dp_set_signal_levels] Using vswing level 1
>[  104.634942] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  104.635550] [drm:intel_dp_start_link_train] clock recovery OK
>[  104.636469] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
>[  104.636470] [drm:intel_dp_set_signal_levels] Using vswing level 1
>[  104.636472] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1
>[  104.637381] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
>[  104.637655] [drm:intel_edp_backlight_on] 
>[  104.637657] [drm:intel_panel_enable_backlight] pipe A
>[  104.637664] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[  104.637670] [drm:intel_psr_match_conditions] PSR disable by flag
>[  104.637672] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
>[  104.672978] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
>[  104.672981] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
>[  104.672983] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
>[  104.672985] [drm:check_crtc_state] [CRTC:20]
>[  104.673004] [drm:check_crtc_state] [CRTC:24]
>[  104.673006] [drm:check_crtc_state] [CRTC:28]
>[  104.673008] [drm:check_shared_dpll_state] WRPLL 1
>[  104.673010] [drm:check_shared_dpll_state] WRPLL 2
>[  104.673017] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  104.673025] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
>[  104.673027] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
>[  104.673029] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
>[  104.673030] [drm:check_crtc_state] [CRTC:20]
>[  104.673037] [drm:check_crtc_state] [CRTC:24]
>[  104.673039] [drm:check_crtc_state] [CRTC:28]
>[  104.673041] [drm:check_shared_dpll_state] WRPLL 1
>[  104.673042] [drm:check_shared_dpll_state] WRPLL 2
>[  104.673045] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  104.673051] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
>[  104.673053] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
>[  104.673054] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
>[  104.673056] [drm:check_crtc_state] [CRTC:20]
>[  104.673063] [drm:check_crtc_state] [CRTC:24]
>[  104.673064] [drm:check_crtc_state] [CRTC:28]
>[  104.673066] [drm:check_shared_dpll_state] WRPLL 1
>[  104.673067] [drm:check_shared_dpll_state] WRPLL 2
>[  104.673071] [drm:intel_connector_check_state] [CONNECTOR:31:eDP-1]
>[  104.673073] [drm:check_encoder_state] [ENCODER:30:TMDS-30]
>[  104.673075] [drm:check_encoder_state] [ENCODER:39:TMDS-39]
>[  104.673076] [drm:check_crtc_state] [CRTC:20]
>[  104.673083] [drm:check_crtc_state] [CRTC:24]
>[  104.673085] [drm:check_crtc_state] [CRTC:28]
>[  104.673086] [drm:check_shared_dpll_state] WRPLL 1
>[  104.673088] [drm:check_shared_dpll_state] WRPLL 2
>[  104.677412] [drm:intel_crtc_set_config] [CRTC:20] [FB:43] #connectors=1 (x y) (0 0)
>[  104.677416] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:20], mode_changed=0, fb_changed=0
>[  104.677419] [drm:intel_modeset_stage_output_state] [CONNECTOR:31:eDP-1] to [CRTC:20]
>[  104.677423] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  104.677426] [drm:connected_sink_compute_bpp] [CONNECTOR:31:eDP-1] checking for sink bpp constrains
>[  104.677427] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[  104.677431] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 361310KHz
>[  104.677438] [drm:intel_dp_compute_config] DP link bw 14 lane count 4 clock 540000 bpp 24
>[  104.677440] [drm:intel_dp_compute_config] DP link bw required 867144 available 1728000
>[  104.677443] [drm:intel_crtc_compute_config] intel_crtc = ffff88025536d000 drm_state (pipe_config->base.state) = ffff8802501f5900
>[  104.677444] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 1
>[  104.677446] [drm:intel_dump_pipe_config] [CRTC:20][modeset] config ffff880254822800 for pipe A
>[  104.677447] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[  104.677448] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 1
>[  104.677451] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  104.677454] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 4209566, gmch_n: 8388608, link_m: 701594, link_n: 1048576, tu: 64
>[  104.677456] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  104.677457] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  104.677458] [drm:intel_dump_pipe_config] requested mode:
>[  104.677461] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[  104.677462] [drm:intel_dump_pipe_config] adjusted mode:
>[  104.677465] [drm:drm_mode_debug_printmodeline] Modeline 0:"3200x1800" 60 361310 3200 3248 3280 3316 1800 1802 1807 1816 0x48 0xa
>[  104.677468] [drm:intel_dump_crtc_timings] crtc timings: 361310 3200 3248 3280 3316 1800 1802 1807 1816, type: 0x48 flags: 0xa
>[  104.677469] [drm:intel_dump_pipe_config] port clock: 540000
>[  104.677470] [drm:intel_dump_pipe_config] pipe src size: 3200x1800
>[  104.677471] [drm:intel_dump_pipe_config] num_scalers: 0
>[  104.677472] [drm:intel_dump_pipe_config] scaler_users: 0x0
>[  104.677473] [drm:intel_dump_pipe_config] scaler id: 0
>[  104.677475] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  104.677477] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  104.677478] [drm:intel_dump_pipe_config] ips: 1
>[  104.677479] [drm:intel_dump_pipe_config] double wide: 0
>[  104.677480] [drm:intel_dump_pipe_config] planes on this crtc
>[  104.677484] [drm:intel_dump_pipe_config] STANDARD PLANE:17 plane: 0.0 idx: 0 enabled
>[  104.677487] [drm:intel_dump_pipe_config] 	FB:43, fb = 3200x1800 format = 0x34325258
>[  104.677487] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 0x0 dst (0, 0) 0x0
>[  104.677489] [drm:intel_dump_pipe_config] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[  104.677491] [drm:intel_dump_pipe_config] STANDARD PLANE:21 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  104.874245] usb 1-4: reset full-speed USB device number 3 using xhci_hcd
>[  105.191425] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
>[  105.395792] PM: restore of devices complete after 1526.547 msecs
>[  105.826765] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  106.159695] asix 1-1:1.0 eth0: register 'asix' at usb-0000:00:14.0-1, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:73:43
>[  106.159936] PM: Image restored successfully.
>[  106.159969] PM: Basic memory bitmaps freed
>[  106.159975] Restarting tasks ... done.
>[  106.167379] asix 1-1:1.0 eth3: renamed from eth0
>[  106.174065] systemd-udevd[4600]: renamed network interface eth0 to eth3
>[  107.643941] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[  107.643954] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  109.829314] [drm] stuck on render ring
>[  109.830498] [drm] GPU HANG: ecode 8:0:0xfffffffe, reason: Ring hung, action: reset
>[  109.830501] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
>[  109.830503] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
>[  109.830505] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
>[  109.830507] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
>[  109.830509] [drm] GPU crash dump saved to /sys/class/drm/card0/error
>[  109.830540] [drm:i915_reset_and_wakeup] resetting chip
>[  109.832167] drm/i915: Resetting chip after gpu hang
>[  109.832205] [drm:gen8_init_common_ring] Execlists enabled for render ring
>[  109.832214] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
>[  109.832220] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
>[  109.832227] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
>[  110.229946] asix 1-1:1.0 eth3: link up, 100Mbps, full-duplex, lpa 0x45E1
>[  111.834562] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  127.200444] init: plymouth-stop pre-start process (4889) terminated with status 1

Actions: View

Attachments on bug 89600: 114360 | 114361 | 115204 | 115366

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.