Attachment 116109 Details for Bug 90396 – dmesg on BDW

dmesg on BDW

dmesg on BDW (text/plain), 65.77 KB, created by xubin on 2015-05-28 07:34:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: xubin

Created: 2015-05-28 07:34:59 UTC

Size: 65.77 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 4.1.0-rc4_drm-intel-testing-2015-05-22+ (root@x-kcloud1) (gcc version 4.8.2 20131212 (Red Hat 4.8.2-7) (GCC) ) #187 SMP Mon May 25 10:07:15 EDT 2015
>[    0.000000] Command line: BOOT_IMAGE=kernels//drm-intel-testing/drm-intel-testing-2015-05-22/bzImage_x86_64 root=/dev/sda3 hostname=x-bdw05 modules_path=kernels//drm-intel-testing/drm-intel-testing-2015-05-22/modules_x86_64/lib/modules/4.1.0-rc4_drm-intel-testing-2015-05-22+ acpi_rsdp=0xac7e1014 kexec_jump_back_entry=0xbc23d25e
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ac1dbfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000ac1dc000-0x00000000ac743fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ac744000-0x00000000ac796fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000ac797000-0x00000000ac7e1fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000ac7e2000-0x00000000ac7fefff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014effffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] DMI not present or invalid.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] e820: last_pfn = 0x14f000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
>[    0.000000]   1 base 00B0000000 mask 7FF0000000 uncachable
>[    0.000000]   2 base 00AE000000 mask 7FFE000000 uncachable
>[    0.000000]   3 base 00AD800000 mask 7FFF800000 uncachable
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] PAT configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
>[    0.000000] e820: last_pfn = 0xac7ff max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x033ff000, 0x033fffff] PGTABLE
>[    0.000000] BRK [0x03400000, 0x03400fff] PGTABLE
>[    0.000000] BRK [0x03401000, 0x03401fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x14ee00000-0x14effffff]
>[    0.000000]  [mem 0x14ee00000-0x14effffff] page 2M
>[    0.000000] BRK [0x03402000, 0x03402fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x140000000-0x14edfffff]
>[    0.000000]  [mem 0x140000000-0x14edfffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x120000000-0x13fffffff]
>[    0.000000]  [mem 0x120000000-0x13fffffff] page 1G
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xac1dbfff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
>[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
>[    0.000000]  [mem 0x80000000-0xabffffff] page 2M
>[    0.000000]  [mem 0xac000000-0xac1dbfff] page 4k
>[    0.000000] init_memory_mapping: [mem 0xac7e2000-0xac7fefff]
>[    0.000000]  [mem 0xac7e2000-0xac7fefff] page 4k
>[    0.000000] BRK [0x03403000, 0x03403fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
>[    0.000000]  [mem 0x100000000-0x11fffffff] page 1G
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000AC7E1014 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 0x00000000AC7A8188 000114 (v01 INTEL  BDW-ULT  00000000      01000013)
>[    0.000000] ACPI: FACP 0x00000000AC7D7000 0000F4 (v05 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: DSDT 0x00000000AC7B3000 01FA7F (v02 INTEL  BDW      00000000 INTL 20130927)
>[    0.000000] ACPI: FACS 0x00000000AC77E000 000040
>[    0.000000] ACPI: TCPA 0x00000000AC7DF000 000032 (v02 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: UEFI 0x00000000AC781000 000042 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: SSDT 0x00000000AC7DE000 0004B5 (v02 Intel_ Tpm2Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7DD000 00004E (v02 MeSsdt MeSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: TPM2 0x00000000AC7DC000 000034 (v03                 00000000      00000000)
>[    0.000000] ACPI: SSDT 0x00000000AC7DB000 0005B1 (v02 Intel  PerfTune 00001000 INTL 20130927)
>[    0.000000] ACPI: DBGP 0x00000000AC7DA000 000034 (v01 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: DBG2 0x00000000AC7D9000 000054 (v00 INTEL           00000000 MSFT 0000005F)
>[    0.000000] ACPI: LPIT 0x00000000AC7D8000 000094 (v01 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: HPET 0x00000000AC7D6000 000038 (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: APIC 0x00000000AC7D5000 0000BC (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: MCFG 0x00000000AC7D4000 00003C (v01 INTEL  BDW-ULT  00000001 MSFT 0000005F)
>[    0.000000] ACPI: WDAT 0x00000000AC7D3000 000104 (v01 INTEL  BDW-ULT  00000000 MSFT 0000005F)
>[    0.000000] ACPI: SSDT 0x00000000AC7B2000 000250 (v02 INTEL  sensrhub 00000000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7AE000 00342F (v02 INTEL  PtidDevc 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7AD000 000C7D (v02 INTEL  Ther_Rvp 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7AC000 00017F (v02 INTEL  zpodd    00001000 INTL 20130927)
>[    0.000000] ACPI: BOOT 0x00000000AC7AB000 000028 (v01 INTEL  TIANO    00000002 MSFT 01000013)
>[    0.000000] ACPI: SSDT 0x00000000AC7AA000 00057D (v02 PmRef  Cpu0Ist  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7A9000 000B74 (v02 CpuRef CpuSsdt  00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7A0000 00712A (v02 SaSsdt SaSsdt   00003000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC7E0000 0006A8 (v02 CppcTa CppcTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: PCCT 0x00000000AC79F000 00006E (v05 PcctTa PcctTabl 00001000 INTL 20130927)
>[    0.000000] ACPI: SSDT 0x00000000AC79E000 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20130927)
>[    0.000000] ACPI: CSRT 0x00000000AC79D000 0000C4 (v01 INTL   BDW-ULT  00000001 INTL 20100528)
>[    0.000000] ACPI: DMAR 0x00000000AC79C000 0000F0 (v01 INTEL  BDW      00000001 INTL 00000001)
>[    0.000000] ACPI: FPDT 0x00000000AC79B000 000044 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: ASF! 0x00000000AC79A000 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
>[    0.000000] ACPI: BGRT 0x00000000AC799000 000038 (v01 INTEL  EDK2     00000002      01000013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014effffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x14effa000-0x14effdfff]
>[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014a600000-ffff88014e5fffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000014effffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
>[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000ac1dbfff]
>[    0.000000]   node   0: [mem 0x00000000ac7e2000-0x00000000ac7fefff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000014effffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000014effffff]
>[    0.000000] On node 0 totalpages: 1028502
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 26 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 10952 pages used for memmap
>[    0.000000]   DMA32 zone: 700921 pages, LIFO batch:31
>[    0.000000]   Normal zone: 5056 pages used for memmap
>[    0.000000]   Normal zone: 323584 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xae000000-0xafffffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xac1dc000-0xac743fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xac744000-0xac796fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xac797000-0xac7e1fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xac7ff000-0xadffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xae000000-0xafffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xe00f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
>[    0.000000] e820: [mem 0xb0000000-0xe00f7fff] available for PCI devices
>[    0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88014ec00000 s91608 r8192 d31272 u262144
>[    0.000000] pcpu-alloc: s91608 r8192 d31272 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1012404
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//drm-intel-testing/drm-intel-testing-2015-05-22/bzImage_x86_64 root=/dev/sda3 hostname=x-bdw05 modules_path=kernels//drm-intel-testing/drm-intel-testing-2015-05-22/modules_x86_64/lib/modules/4.1.0-rc4_drm-intel-testing-2015-05-22+ acpi_rsdp=0xac7e1014 kexec_jump_back_entry=0xbc23d25e
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
>[    0.000000] AGP: Checking aperture...
>[    0.000000] AGP: No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3944276K/4114008K available (7876K kernel code, 1071K rwdata, 3844K rodata, 23384K init, 628K bss, 169732K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:4352 nr_irqs:760 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2294.636 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.27 BogoMIPS (lpj=2294636)
>[    0.000008] pid_max: default: 32768 minimum: 301
>[    0.000014] ACPI: Core revision 20150410
>[    0.026370] ACPI: All ACPI Tables successfully acquired
>[    0.026397] Security Framework initialized
>[    0.026642] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.027514] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.027864] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.027871] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.028063] CPU: Physical Processor ID: 0
>[    0.028066] CPU: Processor Core ID: 0
>[    0.029101] mce: CPU supports 7 MCE banks
>[    0.029112] CPU0: Thermal LVT vector (0xfa) already installed
>[    0.029117] process: using mwait in idle threads
>[    0.029122] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>[    0.029125] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>[    0.029517] Freeing SMP alternatives memory: 36K (ffffffff83358000 - ffffffff83361000)
>[    0.030182] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.040184] TSC deadline timer enabled
>[    0.040187] smpboot: CPU0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (fam: 06, model: 3d, stepping: 04)
>[    0.040210] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
>[    0.040233] ... version:                3
>[    0.040236] ... bit width:              48
>[    0.040239] ... generic registers:      4
>[    0.040242] ... value mask:             0000ffffffffffff
>[    0.040245] ... max period:             0000ffffffffffff
>[    0.040248] ... fixed-purpose events:   3
>[    0.040251] ... event mask:             000000070000000f
>[    0.040468] x86: Booting SMP configuration:
>[    0.040472] .... node  #0, CPUs:      #1
>[    0.052657] CPU1: Thermal LVT vector (0xfa) already installed
>[    0.054738]  #2<7>[    0.066925] CPU2: Thermal LVT vector (0xfa) already installed
>[    0.081190]  #3
>[    0.081190] CPU3: Thermal LVT vector (0xfa) already installed
>[    0.083231] x86: Booted up 1 node, 4 CPUs
>[    0.083239] smpboot: Total of 4 processors activated (18357.08 BogoMIPS)
>[    0.086514] devtmpfs: initialized
>[    0.086840] PM: Registering ACPI NVS region [mem 0xac744000-0xac796fff] (339968 bytes)
>[    0.086920] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
>[    0.086984] xor: automatically using best checksumming function:
>[    0.096331]    avx       : 32232.000 MB/sec
>[    0.096369] RTC time:  6:53:54, date: 05/28/15
>[    0.096469] NET: Registered protocol family 16
>[    0.103367] cpuidle: using governor ladder
>[    0.108380] cpuidle: using governor menu
>[    0.108498] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.108503] ACPI: bus type PCI registered
>[    0.108542] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.108548] PCI: not using MMCONFIG
>[    0.108551] PCI: Using configuration type 1 for base access
>[    0.128404] raid6: sse2x1   gen()  7000 MB/s
>[    0.145421] raid6: sse2x1   xor()  5105 MB/s
>[    0.162438] raid6: sse2x2   gen()  8605 MB/s
>[    0.179453] raid6: sse2x2   xor()  5800 MB/s
>[    0.196469] raid6: sse2x4   gen() 10386 MB/s
>[    0.213487] raid6: sse2x4   xor()  7160 MB/s
>[    0.230503] raid6: avx2x1   gen() 13761 MB/s
>[    0.247522] raid6: avx2x2   gen() 16183 MB/s
>[    0.264537] raid6: avx2x4   gen() 19015 MB/s
>[    0.264541] raid6: using algorithm avx2x4 gen() 19015 MB/s
>[    0.264544] raid6: using avx2x2 recovery algorithm
>[    0.264585] ACPI: Added _OSI(Module Device)
>[    0.264589] ACPI: Added _OSI(Processor Device)
>[    0.264592] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.264595] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.271290] ACPI: Executed 19 blocks of module-level executable AML code
>[    0.277012] ACPI: Dynamic OEM Table Load:
>[    0.277029] ACPI: SSDT 0xFFFF880148D09800 0004AE (v02 PmRef  Cpu0Cst  00003001 INTL 20130927)
>[    0.278010] ACPI: Dynamic OEM Table Load:
>[    0.278025] ACPI: SSDT 0xFFFF880148D0A000 000792 (v02 PmRef  ApIst    00003000 INTL 20130927)
>[    0.279099] ACPI: Dynamic OEM Table Load:
>[    0.279112] ACPI: SSDT 0xFFFF880148CFE600 000119 (v02 PmRef  ApCst    00003000 INTL 20130927)
>[    0.280970] ACPI : EC: EC started
>[    0.282684] ACPI: Interpreter enabled
>[    0.282693] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
>[    0.282704] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
>[    0.282727] ACPI: (supports S0 S3 S4 S5)
>[    0.282730] ACPI: Using IOAPIC for interrupt routing
>[    0.282753] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.284577] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.284785] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.285214] ACPI: Power Resource [PG00] (on)
>[    0.285681] ACPI: Power Resource [PG01] (on)
>[    0.286122] ACPI: Power Resource [PG02] (on)
>[    0.302485] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
>[    0.303637] ACPI: Power Resource [FN00] (off)
>[    0.303707] ACPI: Power Resource [FN01] (off)
>[    0.303775] ACPI: Power Resource [FN02] (off)
>[    0.303841] ACPI: Power Resource [FN03] (off)
>[    0.303907] ACPI: Power Resource [FN04] (off)
>[    0.304826] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    0.304834] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.305566] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.305572] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
>[    0.305856] PCI host bridge to bus 0000:00
>[    0.305860] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    0.305865] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.305869] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.305873] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.305878] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff window]
>[    0.305889] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
>[    0.306100] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
>[    0.306110] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit]
>[    0.306117] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.306122] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.306338] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
>[    0.306346] pci 0000:00:03.0: reg 0x10: [mem 0xd1030000-0xd1033fff 64bit]
>[    0.306565] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
>[    0.306581] pci 0000:00:14.0: reg 0x10: [mem 0xd1020000-0xd102ffff 64bit]
>[    0.306638] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.306840] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.306882] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
>[    0.306898] pci 0000:00:16.0: reg 0x10: [mem 0xd1035000-0xd103501f 64bit]
>[    0.306955] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.307170] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
>[    0.307183] pci 0000:00:19.0: reg 0x10: [mem 0xd1000000-0xd101ffff]
>[    0.307190] pci 0000:00:19.0: reg 0x14: [mem 0xd1038000-0xd1038fff]
>[    0.307198] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
>[    0.307250] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.307448] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.307494] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
>[    0.307818] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
>[    0.307830] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
>[    0.307837] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
>[    0.307843] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
>[    0.307850] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
>[    0.307856] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.307863] pci 0000:00:1f.2: reg 0x24: [mem 0xd1037000-0xd10377ff]
>[    0.307893] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.308111] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
>[    0.308125] pci 0000:00:1f.3: reg 0x10: [mem 0xd1034000-0xd10340ff 64bit]
>[    0.308143] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.308384] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
>[    0.308408] pci 0000:00:1f.6: reg 0x10: [mem 0xd1036000-0xd1036fff 64bit]
>[    0.310594] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.310645] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.310694] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.310741] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15), disabled.
>[    0.310788] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15), disabled.
>[    0.310835] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.310883] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.310930] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.311386] ACPI: Enabled 4 GPEs in block 00 to 7F
>[    0.311575] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
>[    0.311670] vgaarb: setting as boot device: PCI:0000:00:02.0
>[    0.311674] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.311680] vgaarb: loaded
>[    0.311683] vgaarb: bridge control possible 0000:00:02.0
>[    0.311754] SCSI subsystem initialized
>[    0.311798] libata version 3.00 loaded.
>[    0.311840] ACPI: bus type USB registered
>[    0.311864] usbcore: registered new interface driver usbfs
>[    0.311876] usbcore: registered new interface driver hub
>[    0.311893] usbcore: registered new device driver usb
>[    0.311925] pps_core: LinuxPPS API ver. 1 registered
>[    0.311929] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.311939] PTP clock support registered
>[    0.312003] PCI: Using ACPI for IRQ routing
>[    0.317526] PCI: pci_cache_line_size set to 64 bytes
>[    0.317549] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.317551] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    0.317552] e820: reserve RAM buffer [mem 0xac1dc000-0xafffffff]
>[    0.317554] e820: reserve RAM buffer [mem 0xac7ff000-0xafffffff]
>[    0.317555] e820: reserve RAM buffer [mem 0x14f000000-0x14fffffff]
>[    0.317669] NetLabel: Initializing
>[    0.317672] NetLabel:  domain hash size = 128
>[    0.317675] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.317689] NetLabel:  unlabeled traffic allowed by default
>[    0.317811] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.317818] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.319844] Switched to clocksource hpet
>[    0.324114] pnp: PnP ACPI init
>[    0.324382] system 00:00: [io  0x06a4] has been reserved
>[    0.324387] system 00:00: [io  0x06a0] has been reserved
>[    0.324392] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.324555] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.324559] system 00:01: [io  0xffff] has been reserved
>[    0.324563] system 00:01: [io  0xffff] has been reserved
>[    0.324566] system 00:01: [io  0xffff] has been reserved
>[    0.324570] system 00:01: [io  0x1800-0x18fe] could not be reserved
>[    0.324574] system 00:01: [io  0x164e-0x164f] has been reserved
>[    0.324579] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.324620] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.324652] system 00:03: [io  0x1854-0x1857] has been reserved
>[    0.324657] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.324754] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.324825] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.325377] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
>[    0.325381] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
>[    0.325385] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
>[    0.325389] system 00:06: [mem 0xfe10e000-0xfe10efff] has been reserved
>[    0.325393] system 00:06: [mem 0xfe112000-0xfe112fff] has been reserved
>[    0.325397] system 00:06: [mem 0xfe111000-0xfe111007] has been reserved
>[    0.325401] system 00:06: [mem 0xfe111014-0xfe111fff] has been reserved
>[    0.325405] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.326400] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.326404] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.326408] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.326412] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.326416] system 00:07: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.326420] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.326424] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.326428] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
>[    0.326432] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.326436] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.326440] system 00:07: [mem 0xb0010000-0xb001ffff] has been reserved
>[    0.326444] system 00:07: [mem 0xb0000000-0xb000ffff] has been reserved
>[    0.326448] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.326665] system 00:08: [mem 0x00000000-0x0009cfff] could not be reserved
>[    0.326669] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.326786] pnp: PnP ACPI: found 9 devices
>[    0.332912] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.332951] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.332953] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.332955] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.332957] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff window]
>[    0.332984] NET: Registered protocol family 2
>[    0.333149] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.333220] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.333284] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.333310] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.333326] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.333375] NET: Registered protocol family 1
>[    0.333434] RPC: Registered named UNIX socket transport module.
>[    0.333437] RPC: Registered udp transport module.
>[    0.333440] RPC: Registered tcp transport module.
>[    0.333443] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.333453] pci 0000:00:02.0: Video device with shadowed ROM
>[    0.333524] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.333528] pci 0000:00:14.0: PCI INT A: no GSI
>[    0.333568] PCI: CLS 0 bytes, default 64
>[    0.742563] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.742571] software IO TLB [mem 0xa81dc000-0xac1dc000] (64MB) mapped at [ffff8800a81dc000-ffff8800ac1dbfff]
>[    0.742707] Simple Boot Flag at 0x47 set to 0x80
>[    0.742735] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
>[    0.742740] hw unit of domain pp0-core 2^-14 Joules
>[    0.742743] hw unit of domain package 2^-14 Joules
>[    0.742746] hw unit of domain dram 2^-14 Joules
>[    0.742749] hw unit of domain pp1-gpu 2^-14 Joules
>[    0.743251] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.743285] audit: initializing netlink subsys (disabled)
>[    0.743295] audit: type=2000 audit(1432796034.705:1): initialized
>[    0.743530] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.745136] VFS: Disk quotas dquot_6.6.0
>[    0.745172] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.745755] NFS: Registering the id_resolver key type
>[    0.745765] Key type id_resolver registered
>[    0.745768] Key type id_legacy registered
>[    0.745775] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.745932] fuse init (API version 7.23)
>[    0.746217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.746230] io scheduler noop registered
>[    0.746238] io scheduler deadline registered
>[    0.746294] io scheduler cfq registered (default)
>[    0.746379] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.746417] efifb: probing for efifb
>[    0.746436] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 8100k, total 8100k
>[    0.746441] efifb: mode is 1920x1080x32, linelength=7680, pages=2032
>[    0.746444] efifb: scrolling: redraw
>[    0.746447] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.751667] Console: switching to colour frame buffer device 240x67
>[    0.756525] fb0: EFI VGA frame buffer device
>[    0.757443] Monitor-Mwait will be used to enter C-1 state
>[    0.784110] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.784138] ACPI: Thermal Zone [TZ00] (45 C)
>[    0.784756] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.784781] ACPI: Thermal Zone [TZ01] (45 C)
>[    0.784840] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.805467] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    0.805896] Non-volatile memory driver v1.3
>[    0.805944] Linux agpgart interface v0.103
>[    0.807510] brd: module loaded
>[    0.807585] Loading iSCSI transport class v2.0-870.
>[    0.807756] iscsi: registered transport (tcp)
>[    0.807859] Adaptec aacraid driver 1.2-1[40709]-ms
>[    0.807898] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    0.808005] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.18-k.
>[    0.808072] iscsi: registered transport (qla4xxx)
>[    0.808105] QLogic iSCSI HBA Driver
>[    0.808165] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    0.808231] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    0.808267] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    0.808328] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    0.808375] osst :I: Tape driver with OnStream support version 0.99.4
>[    0.808375] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    0.808486] SCSI Media Changer driver v0.25 
>[    0.808533] ahci 0000:00:1f.2: version 3.0
>[    0.819604] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x2 impl SATA mode
>[    0.819640] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    0.820030] scsi host0: ahci
>[    0.820118] scsi host1: ahci
>[    0.820197] scsi host2: ahci
>[    0.820276] scsi host3: ahci
>[    0.820326] ata1: DUMMY
>[    0.820339] ata2: SATA max UDMA/133 abar m2048@0xd1037000 port 0xd1037180 irq 40
>[    0.820370] ata3: DUMMY
>[    0.820382] ata4: DUMMY
>[    0.821082] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.710.51-0 (2014/02/10)
>[    0.821196] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.821229] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.822372] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.823509] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.824654] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    0.825789] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
>[    0.827029] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    1.124410] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.125812] ata2.00: ATA-9: INTEL SSDSC2BB240G4, D2010370, max UDMA/133
>[    1.127786] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32)
>[    1.130098] ata2.00: configured for UDMA/133
>[    1.132156] scsi 1:0:0:0: Direct-Access     ATA      INTEL SSDSC2BB24 0370 PQ: 0 ANSI: 5
>[    1.133487] ata2.00: Enabling discard_zeroes_data
>[    1.133514] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    1.135867] sd 1:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    1.137032] sd 1:0:0:0: [sda] 4096-byte physical blocks
>[    1.138226] sd 1:0:0:0: [sda] Write Protect is off
>[    1.139396] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.139406] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.140673] ata2.00: Enabling discard_zeroes_data
>[    1.142168]  sda: sda1 sda2 sda3
>[    1.144403] ata2.00: Enabling discard_zeroes_data
>[    1.146476] sd 1:0:0:0: [sda] Attached SCSI disk
>[    1.743077] tsc: Refined TSC clocksource calibration: 2294.691 MHz
>[    1.744248] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x21139e24012, max_idle_ns: 440795321740 ns
>[    2.208204] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    2.209417] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:13:20:fc:d6:b4
>[    2.210626] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    2.211853] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
>[    2.213070] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
>[    2.214277] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    2.215508] usbcore: registered new interface driver catc
>[    2.216722] usbcore: registered new interface driver kaweth
>[    2.217922] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    2.219123] usbcore: registered new interface driver pegasus
>[    2.220327] usbcore: registered new interface driver rtl8150
>[    2.221524] usbcore: registered new interface driver asix
>[    2.222711] usbcore: registered new interface driver ax88179_178a
>[    2.223898] usbcore: registered new interface driver cdc_ether
>[    2.225071] usbcore: registered new interface driver dm9601
>[    2.226234] usbcore: registered new interface driver gl620a
>[    2.227381] usbcore: registered new interface driver net1080
>[    2.228506] usbcore: registered new interface driver plusb
>[    2.229611] usbcore: registered new interface driver rndis_host
>[    2.230707] usbcore: registered new interface driver cdc_subset
>[    2.231795] usbcore: registered new interface driver zaurus
>[    2.232874] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    2.233955] usbcore: registered new interface driver cdc_ncm
>[    2.235162] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
>[    2.236213] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
>[    2.237269] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    2.238328] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    2.239436] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
>[    2.240469] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    2.240530] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.241555] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.242594] usb usb1: Product: xHCI Host Controller
>[    2.243640] usb usb1: Manufacturer: Linux 4.1.0-rc4_drm-intel-testing-2015-05-22+ xhci-hcd
>[    2.244719] usb usb1: SerialNumber: 0000:00:14.0
>[    2.245904] hub 1-0:1.0: USB hub found
>[    2.246992] hub 1-0:1.0: 11 ports detected
>[    2.251138] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    2.252246] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    2.253344] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    2.254398] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.255450] usb usb2: Product: xHCI Host Controller
>[    2.256491] usb usb2: Manufacturer: Linux 4.1.0-rc4_drm-intel-testing-2015-05-22+ xhci-hcd
>[    2.257548] usb usb2: SerialNumber: 0000:00:14.0
>[    2.258688] hub 2-0:1.0: USB hub found
>[    2.259745] hub 2-0:1.0: 4 ports detected
>[    2.261524] usb: failed to peer usb2-port3 and usb1-port11 by location (usb2-port3:none) (usb1-port11:usb2-port2)
>[    2.262578] usb usb2-port3: failed to peer to usb1-port11 (-16)
>[    2.263627] usb: port power management may be unreliable
>[    2.265083] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    2.266145] ehci-pci: EHCI PCI platform driver
>[    2.267218] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    2.268266] ohci-pci: OHCI PCI platform driver
>[    2.269314] uhci_hcd: USB Universal Host Controller Interface driver
>[    2.270401] usbcore: registered new interface driver usb-storage
>[    2.271484] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    2.272544] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    2.274027] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    2.275159] mousedev: PS/2 mouse device common for all mice
>[    2.276318] rtc_cmos 00:02: RTC can wake from S4
>[    2.277518] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    2.278621] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    2.279711] i2c /dev entries driver
>[    2.280803] hidraw: raw HID events driver (C) Jiri Kosina
>[    2.282141] usbcore: registered new interface driver usbhid
>[    2.283190] usbhid: USB HID core driver
>[    2.284294] Initializing XFRM netlink socket
>[    2.285336] NET: Registered protocol family 17
>[    2.286383] Key type dns_resolver registered
>[    2.287822] registered taskstats version 1
>[    2.289293] Btrfs loaded
>[    2.290702]   Magic number: 15:72:874
>[    2.291860] PM: Hibernation image not present or could not be loaded.
>[    2.291873] Warning: unable to open an initial console.
>[    2.296108] Freeing unused kernel memory: 23384K (ffffffff81c82000 - ffffffff83358000)
>[    2.312607] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    2.327340] dracut: dracut-018-35.git20120510.fc17
>[    2.351250] udevd[1451]: starting version 182
>[    2.365296] [drm] Initialized drm 1.1.0 20060810
>[    2.368137] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>[    2.370962] ACPI: Lid Switch [LID0]
>[    2.372918] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>[    2.374136] ACPI: Power Button [PWRB]
>[    2.375613] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
>[    2.376925] ACPI: Sleep Button [SLPB]
>[    2.378230] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    2.379529] ACPI: Power Button [PWRF]
>[    2.382462] [drm] Memory usable by graphics device = 4096M
>[    2.382464] checking generic (c0000000 7e9000) vs hw (c0000000 10000000)
>[    2.382465] fb: switching to inteldrmfb from EFI VGA
>[    2.388771] Console: switching to colour dummy device 80x25
>[    2.388865] [drm] Replacing VGA console driver
>[    2.394805] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    2.394810] [drm] Driver supports precise vblank timestamp query.
>[    2.394956] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    2.410922] fbcon: inteldrmfb (fb0) is primary device
>[    2.411463] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    2.411598] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
>[    2.411699] [drm] Initialized i915 1.6.0 20150508 for 0000:00:02.0 on minor 0
>[    2.603601] usb 1-2: new high-speed USB device number 2 using xhci_hcd
>[    2.673836] ------------[ cut here ]------------
>[    2.673846] WARNING: CPU: 0 PID: 1217 at drivers/gpu/drm/drm_irq.c:1159 drm_wait_one_vblank+0x3b/0x16d [drm]()
>[    2.673846] vblank not available on crtc 0, ret=-22
>[    2.673849] Modules linked in: i915 button video drm_kms_helper drm
>[    2.673851] CPU: 0 PID: 1217 Comm: kworker/u16:3 Not tainted 4.1.0-rc4_drm-intel-testing-2015-05-22+ #187
>[    2.673854] Workqueue: events_unbound async_run_entry_fn
>[    2.673856]  0000000000000000 0000000000000009 ffffffff817a6ebc ffff880148f978b8
>[    2.673858]  ffffffff8103ebde 0000000000000000 ffffffffa0005a6b 0000000000000000
>[    2.673859]  ffff88014949a000 0000000000000000 ffff8800a7e8d800 0000000000000009
>[    2.673859] Call Trace:
>[    2.673863]  [<ffffffff817a6ebc>] ? dump_stack+0x40/0x50
>[    2.673865]  [<ffffffff8103ebde>] ? warn_slowpath_common+0x98/0xb0
>[    2.673870]  [<ffffffffa0005a6b>] ? drm_wait_one_vblank+0x3b/0x16d [drm]
>[    2.673871]  [<ffffffff8103ec3b>] ? warn_slowpath_fmt+0x45/0x4a
>[    2.673876]  [<ffffffffa0005a6b>] ? drm_wait_one_vblank+0x3b/0x16d [drm]
>[    2.673878]  [<ffffffff813fcb9c>] ? __pm_runtime_resume+0x5b/0x6a
>[    2.673915]  [<ffffffffa00d547f>] ? intel_finish_crtc_commit+0x47/0x10b [i915]
>[    2.673918]  [<ffffffffa0058b53>] ? drm_atomic_helper_commit_planes+0x170/0x1a9 [drm_kms_helper]
>[    2.673949]  [<ffffffffa00d659c>] ? __intel_set_mode+0x8ac/0x93a [i915]
>[    2.673978]  [<ffffffffa00dbe46>] ? intel_crtc_set_config+0x3f2/0x53d [i915]
>[    2.673983]  [<ffffffffa00184db>] ? drm_modeset_lock+0x4e/0xa3 [drm]
>[    2.673990]  [<ffffffffa000c229>] ? drm_mode_set_config_internal+0x4e/0xd2 [drm]
>[    2.673993]  [<ffffffffa005b13d>] ? restore_fbdev_mode+0xac/0xc3 [drm_kms_helper]
>[    2.673995]  [<ffffffffa005c93e>] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x1e/0x54 [drm_kms_helper]
>[    2.673997]  [<ffffffffa005c9a2>] ? drm_fb_helper_set_par+0x2e/0x32 [drm_kms_helper]
>[    2.674028]  [<ffffffffa00e86eb>] ? intel_fbdev_set_par+0x11/0x55 [i915]
>[    2.674031]  [<ffffffff8137eb2e>] ? fbcon_init+0x2fd/0x406
>[    2.674033]  [<ffffffff813d4637>] ? visual_init+0xaf/0x102
>[    2.674034]  [<ffffffff813d5b89>] ? do_bind_con_driver+0x19e/0x2c2
>[    2.674036]  [<ffffffff813d5f61>] ? do_take_over_console+0x12c/0x15c
>[    2.674037]  [<ffffffff8137e21d>] ? do_fbcon_takeover+0x53/0x97
>[    2.674040]  [<ffffffff810549dc>] ? notifier_call_chain+0x35/0x59
>[    2.674042]  [<ffffffff81054c23>] ? __blocking_notifier_call_chain+0x43/0x5b
>[    2.674044]  [<ffffffff813862ab>] ? lock_fb_info+0x12/0x2f
>[    2.674046]  [<ffffffff81387ac6>] ? register_framebuffer+0x26c/0x2a2
>[    2.674074]  [<ffffffffa00e8b2e>] ? intelfb_create+0x2de/0x37a [i915]
>[    2.674076]  [<ffffffffa005cc53>] ? drm_fb_helper_initial_config+0x2ad/0x34a [drm_kms_helper]
>[    2.674078]  [<ffffffff81055b8f>] ? async_run_entry_fn+0x2d/0xbf
>[    2.674079]  [<ffffffff8104f985>] ? process_one_work+0x1b2/0x31d
>[    2.674081]  [<ffffffff8105026f>] ? worker_thread+0x265/0x351
>[    2.674082]  [<ffffffff8105000a>] ? cancel_delayed_work_sync+0xa/0xa
>[    2.674084]  [<ffffffff81053ee1>] ? kthread+0xce/0xd6
>[    2.674086]  [<ffffffff81053e13>] ? kthread_create_on_node+0x162/0x162
>[    2.674087]  [<ffffffff817acdd2>] ? ret_from_fork+0x42/0x70
>[    2.674089]  [<ffffffff81053e13>] ? kthread_create_on_node+0x162/0x162
>[    2.674090] ---[ end trace a27fc8f923ca171d ]---
>[    2.744555] Switched to clocksource tsc
>[    2.767680] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101
>[    2.767682] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    2.767683] usb 1-2: Product: USB 2.0 Hub
>[    2.767951] hub 1-2:1.0: USB hub found
>[    2.768008] hub 1-2:1.0: 4 ports detected
>[    2.920422] usb 1-5: new low-speed USB device number 3 using xhci_hcd
>[    3.087699] usb 1-5: New USB device found, idVendor=046d, idProduct=c06a
>[    3.087700] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.087701] usb 1-5: Product: USB Optical Mouse
>[    3.087702] usb 1-5: Manufacturer: Logitech
>[    3.087763] usb 1-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    3.089609] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C06A.0001/input/input6
>[    3.089695] hid-generic 0003:046D:C06A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-5/input0
>[    3.157298] usb 1-2.4: new high-speed USB device number 4 using xhci_hcd
>[    3.256518] usb 1-2.4: New USB device found, idVendor=0b95, idProduct=772a
>[    3.256519] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    3.256520] usb 1-2.4: Product: AX88x72A
>[    3.256521] usb 1-2.4: Manufacturer: ASIX Elec. Corp.
>[    3.256522] usb 1-2.4: SerialNumber: 0001B5
>[    3.396158] usb 1-6: new low-speed USB device number 5 using xhci_hcd
>[    3.453238] Console: switching to colour frame buffer device 240x67
>[    3.498729] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    3.499941] i915 0000:00:02.0: registered panic notifier
>[    3.569327] usb 1-6: New USB device found, idVendor=03f0, idProduct=0024
>[    3.570529] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.571708] usb 1-6: Product: HP Basic USB Keyboard
>[    3.572874] usb 1-6: Manufacturer: CHICONY
>[    3.574112] usb 1-6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
>[    3.579363] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:03F0:0024.0002/input/input7
>[    3.631085] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-6/input0
>[    4.019083] asix 1-2.4:1.0 eth1: register 'asix' at usb-0000:00:14.0-2.4, ASIX AX88772 USB 2.0 Ethernet, 8c:ae:4c:ec:98:78
>[    4.024068] dracut: Starting plymouth daemon
>[    4.094797] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    4.097286] ACPI: AC Adapter [ADP1] (on-line)
>[    4.124644] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    4.126711] ACPI: Battery Slot [BAT0] (battery present)
>[    4.127488] EXT4-fs (sda3): INFO: recovery required on readonly filesystem
>[    4.127489] EXT4-fs (sda3): write access will be enabled during recovery
>[    4.133393] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    4.135855] ACPI: Battery Slot [BAT1] (battery absent)
>[    4.138536] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    4.139251] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
>[    4.139411] ACPI Warning: SystemIO range 0x000000000000EFA0-0x000000000000EFBF conflicts with OpRegion 0x000000000000EFA0-0x000000000000EFAF (\_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
>[    4.139413] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    4.139615] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
>[    4.139723] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops update_polyphase_filter [i915])
>[    4.144222] input: PC Speaker as /devices/platform/pcspkr/input/input8
>[    4.146098] EXT4-fs (sda3): recovery complete
>[    4.149068] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    4.160297] ACPI: Battery Slot [BAT2] (battery absent)
>[    4.164632] iTCO_vendor_support: vendor-support=0
>[    4.168944] ppdev: user-space parallel port driver
>[    4.169023] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
>[    4.169299] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
>[    4.169711] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
>[    4.170454] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    4.170574] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    4.170716] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    4.194754] dracut: Checking ext4: /dev/sda3
>[    4.196441] dracut: issuing e2fsck -a  /dev/sda3
>[    4.208055] dracut: /dev/sda3: clean, 791265/4751360 files, 13123988/19000576 blocks
>[    4.209980] dracut: Remounting /dev/sda3 with -o errors=remount-ro,ro
>[    4.221070] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
>[    4.225799] dracut: Mounted root filesystem /dev/sda3
>[    4.236795] device-mapper: uevent: version 1.0.3
>[    4.238521] device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
>[    4.265989] dracut: Switching root
>[    4.307403] random: init urandom read with 98 bits of entropy available
>[    4.329405] init: plymouth-upstart-bridge main process (2856) terminated with status 1
>[    4.331410] init: plymouth-upstart-bridge main process ended, respawning
>[    4.337537] init: plymouth-upstart-bridge main process (2866) terminated with status 1
>[    4.339375] init: plymouth-upstart-bridge main process ended, respawning
>[    4.451850] random: nonblocking pool is initialized
>[    4.484323] systemd-udevd[2979]: starting version 204
>[    4.618551] e1000e 0000:00:19.0 eth5: renamed from eth0
>[    4.631551] systemd-udevd[3010]: renamed network interface eth0 to eth5
>[    4.637137] asix 1-2.4:1.0 eth8: renamed from eth1
>[    4.651402] WARNING! power/level is deprecated; use power/control instead
>[    4.653522] systemd-udevd[2997]: renamed network interface eth1 to eth8
>[    4.673231] systemd-udevd[2997]: could not open moddep file '/lib/modules/4.1.0-rc4_drm-intel-testing-2015-05-22+/modules.dep.bin'
>[    4.823728] Adding 1952764k swap on /dev/sda2.  Priority:-1 extents:1 across:1952764k SS
>[    4.841739] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
>[    5.028952] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
>[    5.160538] init: idmapd-mounting (/lib/modules/4.0.0_drm-intel-nightly_d60065_20150417+) main process (3840) killed by TERM signal
>[    5.162609] init: statd-mounting (/lib/modules/4.0.0_drm-intel-nightly_d60065_20150417+) main process (3842) killed by TERM signal
>[    5.163893] init: failsafe main process (4019) killed by TERM signal
>[    5.248431] init: bluetooth main process (4099) terminated with status 1
>[    5.248443] init: bluetooth main process ended, respawning
>[    5.299922] asix 1-2.4:1.0 eth8: link down
>[    5.378735] init: bluetooth main process (4222) terminated with status 1
>[    5.378748] init: bluetooth main process ended, respawning
>[    5.543247] init: bluetooth main process (4319) terminated with status 1
>[    5.543266] init: bluetooth main process ended, respawning
>[    5.657490] init: bluetooth main process (4417) terminated with status 1
>[    5.657502] init: bluetooth main process ended, respawning
>[    5.686964] init: bluetooth main process (4466) terminated with status 1
>[    5.686978] init: bluetooth main process ended, respawning
>[    5.705110] init: bluetooth main process (4499) terminated with status 1
>[    5.705119] init: bluetooth main process ended, respawning
>[    5.728458] init: bluetooth main process (4528) terminated with status 1
>[    5.728468] init: bluetooth main process ended, respawning
>[    5.787771] init: bluetooth main process (4582) terminated with status 1
>[    5.787780] init: bluetooth main process ended, respawning
>[    5.789887] init: plymouth-upstart-bridge main process ended, respawning
>[    5.813825] init: bluetooth main process (4610) terminated with status 1
>[    5.813834] init: bluetooth main process ended, respawning
>[    5.832970] init: bluetooth main process (4635) terminated with status 1
>[    5.832979] init: bluetooth main process ended, respawning
>[    5.849715] init: bluetooth main process (4660) terminated with status 1
>[    5.849725] init: bluetooth respawning too fast, stopped
>[    7.056400] asix 1-2.4:1.0 eth8: link up, 100Mbps, full-duplex, lpa 0x45E1
>[  116.440715] PM: Syncing filesystems ... done.
>[  116.441681] PM: Preparing system for mem sleep
>[  116.441829] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[  116.442991] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[  116.444089] PM: Entering mem sleep
>[  116.444117] Suspending console(s) (use no_console_suspend to debug)
>[  116.449751] sd 1:0:0:0: [sda] Synchronizing SCSI cache
>[  116.449823] sd 1:0:0:0: [sda] Stopping disk
>[  116.449903] e1000e: EEE TX LPI TIMER: 00000011
>[  117.431895] PM: suspend of devices complete after 988.183 msecs
>[  117.448886] PM: late suspend of devices complete after 16.998 msecs
>[  117.449167] e1000e 0000:00:19.0: System wakeup enabled by ACPI
>[  117.449203] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>[  117.459883] PM: noirq suspend of devices complete after 11.001 msecs
>[  117.460155] ACPI: Preparing to enter system sleep state S3
>[  117.491039] ACPI : EC: EC stopped
>[  117.491039] PM: Saving platform NVS memory
>[  117.491206] Disabling non-boot CPUs ...
>[  117.492343] smpboot: CPU 1 is now offline
>[  117.494013] smpboot: CPU 2 is now offline
>[  117.494372] Broke affinity for irq 40
>[  117.494373] Broke affinity for irq 42
>[  117.495389] smpboot: CPU 3 is now offline
>[  117.496702] ACPI: Low-level resume complete
>[  117.496758] ACPI : EC: EC started
>[  117.496759] PM: Restoring platform NVS memory
>[  117.497151] CPU0: Thermal LVT vector (0xfa) already installed
>[  117.497164] Enabling non-boot CPUs ...
>[  117.497190] x86: Booting SMP configuration:
>[  117.497191] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[  117.508323] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[  117.508324] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[  117.509376] CPU1: Thermal LVT vector (0xfa) already installed
>[  117.511591]  cache: parent cpu1 should not be sleeping
>[  117.511753] CPU1 is up
>[  117.511769] smpboot: Booting Node 0 Processor 2 APIC 0x1
>[  117.523937] CPU2: Thermal LVT vector (0xfa) already installed
>[  117.526154]  cache: parent cpu2 should not be sleeping
>[  117.526318] CPU2 is up
>[  117.526340] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[  117.538522] CPU3: Thermal LVT vector (0xfa) already installed
>[  117.540730]  cache: parent cpu3 should not be sleeping
>[  117.540890] CPU3 is up
>[  117.543993] ACPI: Waking up from system sleep state S3
>[  117.574640] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
>[  117.585457] PM: noirq resume of devices complete after 10.929 msecs
>[  117.589601] PM: early resume of devices complete after 4.129 msecs
>[  117.589821] e1000e 0000:00:19.0: System wakeup disabled by ACPI
>[  117.590238] rtc_cmos 00:02: System wakeup disabled by ACPI
>[  117.590291] serial 00:04: activated
>[  117.591427] sd 1:0:0:0: [sda] Starting disk
>[  117.606405] ------------[ cut here ]------------
>[  117.606423] WARNING: CPU: 1 PID: 5046 at drivers/gpu/drm/i915/intel_display.c:12199 intel_modeset_check_state+0x263/0x87a [i915]()
>[  117.606424] connector's staged encoder doesn't match current encoder
>[  117.606433] Modules linked in: dm_mod iTCO_wdt snd_hda_codec_hdmi iTCO_vendor_support ppdev pcspkr snd_hda_intel i2c_i801 snd_hda_codec snd_hda_core snd_hwdep snd_pcm lpc_ich mfd_core snd_timer snd soundcore battery parport_pc parport ac acpi_cpufreq i915 button video drm_kms_helper drm
>[  117.606435] CPU: 1 PID: 5046 Comm: kworker/u16:14 Tainted: G        W       4.1.0-rc4_drm-intel-testing-2015-05-22+ #187
>[  117.606439] Workqueue: events_unbound async_run_entry_fn
>[  117.606441]  0000000000000000 0000000000000009 ffffffff817a6ebc ffff8800a7e27bf8
>[  117.606443]  ffffffff8103ebde ffff88014949f000 ffffffffa00db3f3 ffff8800a7e27c24
>[  117.606444]  ffff8801494a5000 ffff8800a7e8d800 0000000000000004 ffff8800a7e8db28
>[  117.606444] Call Trace:
>[  117.606448]  [<ffffffff817a6ebc>] ? dump_stack+0x40/0x50
>[  117.606450]  [<ffffffff8103ebde>] ? warn_slowpath_common+0x98/0xb0
>[  117.606462]  [<ffffffffa00db3f3>] ? intel_modeset_check_state+0x263/0x87a [i915]
>[  117.606463]  [<ffffffff8103ec3b>] ? warn_slowpath_fmt+0x45/0x4a
>[  117.606474]  [<ffffffffa00db3f3>] ? intel_modeset_check_state+0x263/0x87a [i915]
>[  117.606484]  [<ffffffffa00dbf9e>] ? intel_set_mode+0xd/0x3a [i915]
>[  117.606490]  [<ffffffffa0018d96>] ? drm_atomic_state_default_clear+0x109/0x12e [drm]
>[  117.606501]  [<ffffffffa00dd7a3>] ? intel_modeset_setup_hw_state+0xa21/0xa88 [i915]
>[  117.606514]  [<ffffffffa00c2b22>] ? gen8_write64+0x172/0x172 [i915]
>[  117.606519]  [<ffffffffa00189f7>] ? __drm_modeset_lock_all+0xb9/0xf1 [drm]
>[  117.606522]  [<ffffffff8136a6b7>] ? pci_pm_restore+0x94/0x94
>[  117.606530]  [<ffffffffa007d1bd>] ? i915_drm_resume+0xce/0x135 [i915]
>[  117.606533]  [<ffffffff813fd6b5>] ? dpm_run_callback+0x3a/0xc5
>[  117.606535]  [<ffffffff813fdc01>] ? device_resume+0x177/0x1b8
>[  117.606537]  [<ffffffff813fdc56>] ? async_resume+0x14/0x38
>[  117.606538]  [<ffffffff81055b8f>] ? async_run_entry_fn+0x2d/0xbf
>[  117.606540]  [<ffffffff8104f985>] ? process_one_work+0x1b2/0x31d
>[  117.606541]  [<ffffffff8105026f>] ? worker_thread+0x265/0x351
>[  117.606543]  [<ffffffff8105000a>] ? cancel_delayed_work_sync+0xa/0xa
>[  117.606544]  [<ffffffff81053ee1>] ? kthread+0xce/0xd6
>[  117.606546]  [<ffffffff81053e13>] ? kthread_create_on_node+0x162/0x162
>[  117.606548]  [<ffffffff817acdd2>] ? ret_from_fork+0x42/0x70
>[  117.606550]  [<ffffffff81053e13>] ? kthread_create_on_node+0x162/0x162
>[  117.606551] ---[ end trace a27fc8f923ca171e ]---
>[  117.606552] ------------[ cut here ]------------
>[  117.606562] WARNING: CPU: 1 PID: 5046 at drivers/gpu/drm/i915/intel_display.c:12199 intel_modeset_check_state+0x263/0x87a [i915]()
>[  117.606563] connector's staged encoder doesn't match current encoder
>[  117.606570] Modules linked in: dm_mod iTCO_wdt snd_hda_codec_hdmi iTCO_vendor_support ppdev pcspkr snd_hda_intel i2c_i801 snd_hda_codec snd_hda_core snd_hwdep snd_pcm lpc_ich mfd_core snd_timer snd soundcore battery parport_pc parport ac acpi_cpufreq i915 button video drm_kms_helper drm
>[  117.606572] CPU: 1 PID: 5046 Comm: kworker/u16:14 Tainted: G        W       4.1.0-rc4_drm-intel-testing-2015-05-22+ #187
>[  117.606573] Workqueue: events_unbound async_run_entry_fn
>[  117.606575]  0000000000000000 0000000000000009 ffffffff817a6ebc ffff8800a7e27bf8
>[  117.606576]  ffffffff8103ebde ffff880002d2a000 ffffffffa00db3f3 ffff8800a7e27c24
>[  117.606577]  ffff880148c10800 ffff8800a7e8d800 0000000000000004 ffff8800a7e8db28
>[  117.606578] Call Trace:
>[  117.606579]  [<ffffffff817a6ebc>] ? dump_stack+0x40/0x50
>[  117.606581]  [<ffffffff8103ebde>] ? warn_slowpath_common+0x98/0xb0
>[  117.606590]  [<ffffffffa00db3f3>] ? intel_modeset_check_state+0x263/0x87a [i915]
>[  117.606591]  [<ffffffff8103ec3b>] ? warn_slowpath_fmt+0x45/0x4a
>[  117.606601]  [<ffffffffa00db3f3>] ? intel_modeset_check_state+0x263/0x87a [i915]
>[  117.606611]  [<ffffffffa00dbf9e>] ? intel_set_mode+0xd/0x3a [i915]
>[  117.606616]  [<ffffffffa0018d96>] ? drm_atomic_state_default_clear+0x109/0x12e [drm]
>[  117.606626]  [<ffffffffa00dd7a3>] ? intel_modeset_setup_hw_state+0xa21/0xa88 [i915]
>[  117.606638]  [<ffffffffa00c2b22>] ? gen8_write64+0x172/0x172 [i915]
>[  117.606643]  [<ffffffffa00189f7>] ? __drm_modeset_lock_all+0xb9/0xf1 [drm]
>[  117.606644]  [<ffffffff8136a6b7>] ? pci_pm_restore+0x94/0x94
>[  117.606653]  [<ffffffffa007d1bd>] ? i915_drm_resume+0xce/0x135 [i915]
>[  117.606655]  [<ffffffff813fd6b5>] ? dpm_run_callback+0x3a/0xc5
>[  117.606657]  [<ffffffff813fdc01>] ? device_resume+0x177/0x1b8
>[  117.606659]  [<ffffffff813fdc56>] ? async_resume+0x14/0x38
>[  117.606660]  [<ffffffff81055b8f>] ? async_run_entry_fn+0x2d/0xbf
>[  117.606661]  [<ffffffff8104f985>] ? process_one_work+0x1b2/0x31d
>[  117.606662]  [<ffffffff8105026f>] ? worker_thread+0x265/0x351
>[  117.606664]  [<ffffffff8105000a>] ? cancel_delayed_work_sync+0xa/0xa
>[  117.606665]  [<ffffffff81053ee1>] ? kthread+0xce/0xd6
>[  117.606667]  [<ffffffff81053e13>] ? kthread_create_on_node+0x162/0x162
>[  117.606669]  [<ffffffff817acdd2>] ? ret_from_fork+0x42/0x70
>[  117.606670]  [<ffffffff81053e13>] ? kthread_create_on_node+0x162/0x162
>[  117.606671] ---[ end trace a27fc8f923ca171f ]---
>[  117.606672] ------------[ cut here ]------------
>[  117.606682] WARNING: CPU: 1 PID: 5046 at drivers/gpu/drm/i915/intel_display.c:12219 intel_modeset_check_state+0x2f1/0x87a [i915]()
>[  117.606682] encoder's stage crtc doesn't match current crtc
>[  117.606690] Modules linked in: dm_mod iTCO_wdt snd_hda_codec_hdmi iTCO_vendor_support ppdev pcspkr snd_hda_intel i2c_i801 snd_hda_codec snd_hda_core snd_hwdep snd_pcm lpc_ich mfd_core snd_timer snd soundcore battery parport_pc parport ac acpi_cpufreq i915 button video drm_kms_helper drm
>[  117.606691] CPU: 1 PID: 5046 Comm: kworker/u16:14 Tainted: G        W       4.1.0-rc4_drm-intel-testing-2015-05-22+ #187
>[  117.606692] Workqueue: events_unbound async_run_entry_fn
>[  117.606694]  0000000000000000 0000000000000009 ffffffff817a6ebc ffff8800a7e27bf8
>[  117.606695]  ffffffff8103ebde ffff880002d2d000 ffffffffa00db481 ffff8800a7e27c24
>[  117.606696]  ffff88014949f000 ffff8800a7e8d800 0000000000000004 ffff8800a7e8db28
>[  117.606697] Call Trace:
>[  117.606698]  [<ffffffff817a6ebc>] ? dump_stack+0x40/0x50
>[  117.606700]  [<ffffffff8103ebde>] ? warn_slowpath_common+0x98/0xb0
>[  117.606709]  [<ffffffffa00db481>] ? intel_modeset_check_state+0x2f1/0x87a [i915]
>[  117.606710]  [<ffffffff8103ec3b>] ? warn_slowpath_fmt+0x45/0x4a
>[  117.606720]  [<ffffffffa00db481>] ? intel_modeset_check_state+0x2f1/0x87a [i915]
>[  117.606729]  [<ffffffffa00dbf9e>] ? intel_set_mode+0xd/0x3a [i915]
>[  117.606734]  [<ffffffffa0018d96>] ? drm_atomic_state_default_clear+0x109/0x12e [drm]
>[  117.606744]  [<ffffffffa00dd7a3>] ? intel_modeset_setup_hw_state+0xa21/0xa88 [i915]
>[  117.606755]  [<ffffffffa00c2b22>] ? gen8_write64+0x172/0x172 [i915]
>[  117.606761]  [<ffffffffa00189f7>] ? __drm_modeset_lock_all+0xb9/0xf1 [drm]
>[  117.606762]  [<ffffffff8136a6b7>] ? pci_pm_restore+0x94/0x94
>[  117.606770]  [<ffffffffa007d1bd>] ? i915_drm_resume+0xce/0x135 [i915]
>[  117.606772]  [<ffffffff813fd6b5>] ? dpm_run_callback+0x3a/0xc5
>[  117.606774]  [<ffffffff813fdc01>] ? device_resume+0x177/0x1b8
>[  117.606776]  [<ffffffff813fdc56>] ? async_resume+0x14/0x38
>[  117.606777]  [<ffffffff81055b8f>] ? async_run_entry_fn+0x2d/0xbf
>[  117.606779]  [<ffffffff8104f985>] ? process_one_work+0x1b2/0x31d
>[  117.606780]  [<ffffffff8105026f>] ? worker_thread+0x265/0x351
>[  117.606781]  [<ffffffff8105000a>] ? cancel_delayed_work_sync+0xa/0xa
>[  117.606783]  [<ffffffff81053ee1>] ? kthread+0xce/0xd6
>[  117.606785]  [<ffffffff81053e13>] ? kthread_create_on_node+0x162/0x162
>[  117.606786]  [<ffffffff817acdd2>] ? ret_from_fork+0x42/0x70
>[  117.606788]  [<ffffffff81053e13>] ? kthread_create_on_node+0x162/0x162
>[  117.606789] ---[ end trace a27fc8f923ca1720 ]---
>[  117.606790] ------------[ cut here ]------------
>[  117.606799] WARNING: CPU: 1 PID: 5046 at drivers/gpu/drm/i915/intel_display.c:12219 intel_modeset_check_state+0x2f1/0x87a [i915]()
>[  117.606799] encoder's stage crtc doesn't match current crtc
>[  117.606807] Modules linked in: dm_mod iTCO_wdt snd_hda_codec_hdmi iTCO_vendor_support ppdev pcspkr snd_hda_intel i2c_i801 snd_hda_codec snd_hda_core snd_hwdep snd_pcm lpc_ich mfd_core snd_timer snd soundcore battery parport_pc parport ac acpi_cpufreq i915 button video drm_kms_helper drm
>[  117.606808] CPU: 1 PID: 5046 Comm: kworker/u16:14 Tainted: G        W       4.1.0-rc4_drm-intel-testing-2015-05-22+ #187
>[  117.606809] Workqueue: events_unbound async_run_entry_fn
>[  117.606811]  0000000000000000 0000000000000009 ffffffff817a6ebc ffff8800a7e27bf8
>[  117.606812]  ffffffff8103ebde 0000000000000246 ffffffffa00db481 ffff8800a7e27c24
>[  117.606813]  ffff880002d2a000 ffff8800a7e8d800 0000000000000000 ffff8800a7e8db28
>[  117.606814] Call Trace:
>[  117.606815]  [<ffffffff817a6ebc>] ? dump_stack+0x40/0x50
>[  117.606817]  [<ffffffff8103ebde>] ? warn_slowpath_common+0x98/0xb0
>[  117.606826]  [<ffffffffa00db481>] ? intel_modeset_check_state+0x2f1/0x87a [i915]
>[  117.606827]  [<ffffffff8103ec3b>] ? warn_slowpath_fmt+0x45/0x4a
>[  117.606838]  [<ffffffffa00ee544>] ? intel_ddi_get_hw_state+0x50/0x14a [i915]
>[  117.606847]  [<ffffffffa00db481>] ? intel_modeset_check_state+0x2f1/0x87a [i915]
>[  117.606857]  [<ffffffffa00dbf9e>] ? intel_set_mode+0xd/0x3a [i915]
>[  117.606862]  [<ffffffffa0018d96>] ? drm_atomic_state_default_clear+0x109/0x12e [drm]
>[  117.606872]  [<ffffffffa00dd7a3>] ? intel_modeset_setup_hw_state+0xa21/0xa88 [i915]
>[  117.606883]  [<ffffffffa00c2b22>] ? gen8_write64+0x172/0x172 [i915]
>[  117.606888]  [<ffffffffa00189f7>] ? __drm_modeset_lock_all+0xb9/0xf1 [drm]
>[  117.606890]  [<ffffffff8136a6b7>] ? pci_pm_restore+0x94/0x94
>[  117.606898]  [<ffffffffa007d1bd>] ? i915_drm_resume+0xce/0x135 [i915]
>[  117.606900]  [<ffffffff813fd6b5>] ? dpm_run_callback+0x3a/0xc5
>[  117.606902]  [<ffffffff813fdc01>] ? device_resume+0x177/0x1b8
>[  117.606904]  [<ffffffff813fdc56>] ? async_resume+0x14/0x38
>[  117.606905]  [<ffffffff81055b8f>] ? async_run_entry_fn+0x2d/0xbf
>[  117.606906]  [<ffffffff8104f985>] ? process_one_work+0x1b2/0x31d
>[  117.606908]  [<ffffffff8105026f>] ? worker_thread+0x265/0x351
>[  117.606909]  [<ffffffff8105000a>] ? cancel_delayed_work_sync+0xa/0xa
>[  117.606911]  [<ffffffff81053ee1>] ? kthread+0xce/0xd6
>[  117.606912]  [<ffffffff81053e13>] ? kthread_create_on_node+0x162/0x162
>[  117.606914]  [<ffffffff817acdd2>] ? ret_from_fork+0x42/0x70
>[  117.606915]  [<ffffffff81053e13>] ? kthread_create_on_node+0x162/0x162
>[  117.606916] ---[ end trace a27fc8f923ca1721 ]---
>[  117.703021] PM: resume of devices complete after 113.481 msecs
>[  117.703248] PM: Finishing wakeup.
>[  117.703249] Restarting tasks ... done.
>[  117.894161] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  117.894710] ata2.00: configured for UDMA/133
>[  117.894732] ata2.00: Enabling discard_zeroes_data
>[  121.044390] asix 1-2.4:1.0 eth8: link up, 100Mbps, full-duplex, lpa 0x45E1

Actions: View

Attachments on bug 90396: 115680 | 115681 | 115682 | 115683 | 115684 | 115799 | 116109 | 116146 | 116194 | 116198 | 116295 | 116571 | 116572

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.