Attachment 123179 Details for Bug 95015 – dmesg (Radeon on PCIe x8, no IOMMU bypass)

dmesg (Radeon on PCIe x8, no IOMMU bypass)

dmesg.txt (text/plain), 38.74 KB, created by Rui Salvaterra on 2016-04-23 10:40:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Rui Salvaterra

Created: 2016-04-23 10:40:59 UTC

Size: 38.74 KB

patch

obsolete

>[    0.000000] Allocated 4096 bytes for 2 pacas at c00000000ffff000
>[    0.000000] DART table allocated at: c00000007f000000
>[    0.000000] Using PowerMac machine description
>[    0.000000] Page orders: linear mapping = 24, virtual = 12, io = 12
>[    0.000000] Found initrd at 0xc000000001500000:0xc000000001bf8c00
>[    0.000000] Found U4 memory controller & host bridge @ 0xf8000000 revision: 0x42
>[    0.000000] Mapped at 0xd000080080000000
>[    0.000000] Found a Shasta mac-io controller, rev: 0, mapped at 0xd000080080041000
>[    0.000000] PowerMac motherboard: PowerMac G5 Dual Core
>[    0.000000] DART IOMMU initialized for U4 type chipset
>[    0.000000] bootconsole [udbg0] enabled
>[    0.000000] CPU maps initialized for 1 thread per core
>[    0.000000]  (thread shift is 0)
>[    0.000000] Starting Linux ppc64 #14 SMP Fri Apr 22 14:36:36 WEST 2016
>[    0.000000] -----------------------------------------------------
>[    0.000000] ppc64_pft_size    = 0x0
>[    0.000000] phys_mem_size     = 0x280000000
>[    0.000000] cpu_features      = 0x0804806318100448
>[    0.000000]   possible        = 0x3f7fffff18500649
>[    0.000000]   always          = 0x0000000018100040
>[    0.000000] cpu_user_features = 0xdc080000 0x00000000
>[    0.000000] mmu_features      = 0x0c000001
>[    0.000000] firmware_features = 0x0000000000000000
>[    0.000000] htab_address      = 0xc0000002f0000000
>[    0.000000] htab_hash_mask    = 0x1fffff
>[    0.000000] -----------------------------------------------------
>[    0.000000] Linux version 4.6.0-rc4 (rui@bigmac) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2) ) #14 SMP Fri Apr 22 14:36:36 WEST 2016
>[    0.000000] Found U4-PCIE PCI host bridge.  Firmware bus number: 0->255
>[    0.000000] PCI host bridge /pci@0,f0000000  ranges:
>[    0.000000]  MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000 
>[    0.000000]   IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
>[    0.000000]  MEM 0x00000000c0000000..0x00000000efffffff -> 0x00000000c0000000 
>[    0.000000] Can't get bus-range for /ht@0,f2000000, assume bus 0
>[    0.000000] Found U3-HT PCI host bridge.  Firmware bus number: 0->239
>[    0.000000] PCI host bridge /ht@0,f2000000 (primary) ranges:
>[    0.000000] SMU: Driver 0.7 (c) 2005 Benjamin Herrenschmidt, IBM Corp.
>[    0.000000] nvram: Checking bank 0...
>[    0.000000] nvram: gen0=990, gen1=991
>[    0.000000] nvram: Active bank is: 1
>[    0.000000] nvram: OF partition at 0x410
>[    0.000000] nvram: XP partition at 0x1020
>[    0.000000] nvram: NR partition at 0x1120
>[    0.000000] Top of RAM: 0x300000000, Total RAM: 0x280000000
>[    0.000000] Memory hole size: 2048MB
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000000000-0x00000002ffffffff]
>[    0.000000]   DMA32    empty
>[    0.000000]   Normal   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000000000-0x000000007fffffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x00000002ffffffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000002ffffffff]
>[    0.000000] On node 0 totalpages: 2621440
>[    0.000000] free_area_init_node: node 0, pgdat c00000000076c880, node_mem_map c0000002e57c2d00
>[    0.000000]   DMA zone: 43008 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 2621440 pages, LIFO batch:31
>[    0.000000] percpu: Embedded 19 pages/cpu @c0000002e5600000 s38808 r0 d39016 u524288
>[    0.000000] pcpu-alloc: s38808 r0 d39016 u524288 alloc=1*1048576
>[    0.000000] pcpu-alloc: [0] 0 1 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2578432
>[    0.000000] Kernel command line: root=UUID=de81dfe4-0913-4ee5-a135-86abd541e6b9 ro quiet splash 
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>[    0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.000000] Sorting __ex_table...
>[    0.000000] Memory: 9994200K/10485760K available (4376K kernel code, 780K rwdata, 992K rodata, 2072K init, 286K bss, 491560K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
>[    0.000000] NR_IRQS:512 nr_irqs:512 16
>[    0.000000] mpic: Resetting
>[    0.000000] mpic: Setting up MPIC " MPIC 1   " version 1.2 at f8040000, max 2 CPUs
>[    0.000000] mpic: ISU size: 124, shift: 7, mask: 7f
>[    0.000000] mpic: Initializing for 124 sources
>[    0.000000] mpic: Setting up HT PICs workarounds for U3/U4
>[    0.000000] mpic:   - HT:01.0 disabled MSI mapping found @ 0xfee00000
>[    0.000000] mpic:   - HT:02.0 disabled MSI mapping found @ 0xfee00000
>[    0.000000] mpic:   - HT:03.0 disabled MSI mapping found @ 0xfee00000
>[    0.000000] mpic:   - HT:04.0 disabled MSI mapping found @ 0xfee00000
>[    0.000000] mpic:   - HT:05.0 disabled MSI mapping found @ 0xfee00000
>[    0.000000] mpic:   - HT:06.0 disabled MSI mapping found @ 0xfee00000
>[    0.000000] mpic:   - HT:07.0 [0x90] vendor 106b device 0053 has 86 irqs
>[    0.000000] time_init: decrementer frequency = 33.333333 MHz
>[    0.000000] time_init: processor frequency   = 2300.000000 MHz
>[    0.000003] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x7b00c4bad, max_idle_ns: 440795202744 ns
>[    0.000007] clocksource: timebase mult[1e000005] shift[24] registered
>[    0.000011] clockevent: decrementer mult[8888887] shift[32] cpu[0]
>[    0.000049] Console: colour dummy device 80x25
>[    0.000054] console [tty0] enabled
>[    0.000057] bootconsole [udbg0] disabled
>[    0.000063] pid_max: default: 32768 minimum: 301
>[    0.000107] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.000112] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.000845] PowerMac SMP probe found 2 cpus
>[    0.000964] KeyWest i2c @0xf8001003 irq 16 /u4@0,f8000000/i2c@f8001000
>[    0.000970]  channel 1 bus /u4@0,f8000000/i2c@f8001000/i2c-bus@1
>[    0.001018] KeyWest i2c @0x80018000 irq 27 /ht@0,f2000000/pci@8/mac-io@7/i2c@18000
>[    0.001023]  channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0
>[    0.001028]  channel 0 bus /ht@0,f2000000/pci@8/mac-io@7/i2c@18000/i2c-bus@0
>[    0.001069] SMU i2c /smu@0,0/smu-i2c-control@0
>[    0.001074]  channel b bus /smu@0,0/smu-i2c-control@0/i2c-bus@b
>[    0.001079]  channel e bus /smu@0,0/smu-i2c-control@0/i2c-bus@e
>[    0.001101] Processor timebase sync using platform function
>[    0.001105] mpic: requesting IPIs...
>[    0.002705] Brought up 2 CPUs
>[    0.003116] devtmpfs: initialized
>[    0.005271] device-tree: Duplicate name in i2c@18000, renamed to "i2c-bus@0#1"
>[    0.007010] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
>[    0.007288] NET: Registered protocol family 16
>[    0.030047] cpuidle: using governor menu
>[    0.030324] PCI: Probing PCI hardware
>[    0.030462] PCI host bridge to bus 0000:00
>[    0.030468] pci_bus 0000:00: root bus resource [io  0x10000-0x80ffff] (bus address [0x0000-0x7fffff])
>[    0.030473] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
>[    0.030477] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff]
>[    0.030484] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.030491] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
>[    0.030523] pci 0000:00:0b.0: [106b:005b] type 01 class 0x060400
>[    0.030556] PCI: Fixup U4 PCIe bridge range: [mem 0xc0000000-0xefffffff]
>[    0.030594] pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
>[    0.066304] IOMMU table initialized, virtual merging enabled
>[    0.066369] pci 0000:00:0b.0: PCI bridge to [bus 0a]
>[    0.066377] pci 0000:00:0b.0:   bridge window [io  0x10000-0x1ffff]
>[    0.066383] pci 0000:00:0b.0:   bridge window [mem 0xc0000000-0xefffffff]
>[    0.066390] pci 0000:00:0b.0:   bridge window [mem 0x00000000-0x000fffff 64bit pref]
>[    0.066403] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 0a
>[    0.066499] PCI host bridge to bus 0001:00
>[    0.066504] pci_bus 0001:00: root bus resource [io  0x811000-0xc10fff] (bus address [0x0000-0x3fffff])
>[    0.066508] pci_bus 0001:00: root bus resource [mem 0xfa000000-0xffffffff]
>[    0.066512] pci_bus 0001:00: root bus resource [mem 0x80000000-0xbfffffff]
>[    0.066516] pci_bus 0001:00: root bus resource [bus 00-ef]
>[    0.066521] pci_bus 0001:00: busn_res: [bus 00-ef] end is updated to ff
>[    0.066543] pci 0001:00:00.0: [106b:0074] type 00 class 0x060000
>[    0.066634] pci 0001:00:01.0: [1166:0130] type 01 class 0x060400
>[    0.066746] pci 0001:00:02.0: [1166:0130] type 01 class 0x060400
>[    0.066853] pci 0001:00:03.0: [1166:0132] type 01 class 0x060400
>[    0.066960] pci 0001:00:04.0: [1166:0132] type 01 class 0x060400
>[    0.067069] pci 0001:00:05.0: [1166:0132] type 01 class 0x060400
>[    0.067178] pci 0001:00:06.0: [1166:0132] type 01 class 0x060400
>[    0.067291] pci 0001:00:07.0: [106b:0053] type 01 class 0x060400
>[    0.067419] pci 0001:00:08.0: [106b:0054] type 01 class 0x060400
>[    0.067538] pci 0001:00:09.0: [106b:0055] type 01 class 0x060400
>[    0.067729] pci 0001:00:01.0: PCI bridge to [bus 04]
>[    0.067805] pci 0001:05:04.0: [14e4:166a] type 00 class 0x020000
>[    0.067821] pci 0001:05:04.0: reg 0x10: [mem 0xfa530000-0xfa53ffff 64bit]
>[    0.067831] pci 0001:05:04.0: reg 0x18: [mem 0xfa520000-0xfa52ffff 64bit]
>[    0.067877] pci 0001:05:04.0: PME# supported from D3hot D3cold
>[    0.067959] pci 0001:05:04.1: [14e4:166a] type 00 class 0x020000
>[    0.067975] pci 0001:05:04.1: reg 0x10: [mem 0xfa510000-0xfa51ffff 64bit]
>[    0.067985] pci 0001:05:04.1: reg 0x18: [mem 0xfa500000-0xfa50ffff 64bit]
>[    0.068031] pci 0001:05:04.1: PME# supported from D3hot D3cold
>[    0.068104] pci 0001:00:02.0: PCI bridge to [bus 05]
>[    0.068112] pci 0001:00:02.0:   bridge window [mem 0xfa500000-0xfa5fffff]
>[    0.068217] pci 0001:06:00.0: [1002:6779] type 00 class 0x030000
>[    0.068233] pci 0001:06:00.0: reg 0x10: [mem 0x90000000-0x9fffffff 64bit pref]
>[    0.068246] pci 0001:06:00.0: reg 0x18: [mem 0x80140000-0x8015ffff 64bit]
>[    0.068255] pci 0001:06:00.0: reg 0x20: [io  0x811000-0x8110ff]
>[    0.068269] pci 0001:06:00.0: reg 0x30: [mem 0x80120000-0x8013ffff pref]
>[    0.068314] pci 0001:06:00.0: supports D1 D2
>[    0.068399] pci 0001:06:00.1: [1002:aa98] type 00 class 0x040300
>[    0.068415] pci 0001:06:00.1: reg 0x10: [mem 0x80100000-0x80103fff 64bit]
>[    0.068485] pci 0001:06:00.1: supports D1 D2
>[    0.080079] pci 0001:00:03.0: PCI bridge to [bus 06]
>[    0.080086] pci 0001:00:03.0:   bridge window [io  0x811000-0x811fff]
>[    0.080091] pci 0001:00:03.0:   bridge window [mem 0x80100000-0x9fffffff]
>[    0.080173] pci 0001:00:04.0: PCI bridge to [bus 07]
>[    0.080236] pci 0001:00:05.0: PCI bridge to [bus 08]
>[    0.080314] pci 0001:09:00.0: [10de:0141] type 00 class 0x030000
>[    0.080326] pci 0001:09:00.0: reg 0x10: [mem 0xb1000000-0xb1ffffff]
>[    0.080338] pci 0001:09:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
>[    0.080350] pci 0001:09:00.0: reg 0x1c: [mem 0xb0000000-0xb0ffffff 64bit]
>[    0.080365] pci 0001:09:00.0: reg 0x30: [mem 0xb2000000-0xb201ffff pref]
>[    0.080466] pci 0001:09:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.080474] pci 0001:00:06.0: PCI bridge to [bus 09]
>[    0.080483] pci 0001:00:06.0:   bridge window [mem 0xa0000000-0xb20fffff]
>[    0.080564] pci 0001:00:07.0: PCI bridge to [bus 02]
>[    0.080573] pci 0001:00:07.0:   bridge window [mem 0xfa000000-0xfa3fffff]
>[    0.080579] pci 0001:00:07.0:   bridge window [mem 0x00000000-0x000fffff pref]
>[    0.080644] pci 0001:01:07.0: [106b:004f] type 00 class 0xff0000
>[    0.080656] pci 0001:01:07.0: reg 0x10: [mem 0x80000000-0x8007ffff]
>[    0.080772] pci 0001:01:0b.0: [1033:0035] type 00 class 0x0c0310
>[    0.080787] pci 0001:01:0b.0: reg 0x10: [mem 0x80082000-0x80082fff]
>[    0.080842] pci 0001:01:0b.0: supports D1 D2
>[    0.080845] pci 0001:01:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.080923] pci 0001:01:0b.1: [1033:0035] type 00 class 0x0c0310
>[    0.080937] pci 0001:01:0b.1: reg 0x10: [mem 0x80081000-0x80081fff]
>[    0.080992] pci 0001:01:0b.1: supports D1 D2
>[    0.080996] pci 0001:01:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.081078] pci 0001:01:0b.2: [1033:00e0] type 00 class 0x0c0320
>[    0.081092] pci 0001:01:0b.2: reg 0x10: [mem 0x80080000-0x800800ff]
>[    0.081147] pci 0001:01:0b.2: supports D1 D2
>[    0.081151] pci 0001:01:0b.2: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.081222] pci 0001:00:08.0: PCI bridge to [bus 01]
>[    0.081232] pci 0001:00:08.0:   bridge window [mem 0x80000000-0x800fffff]
>[    0.081238] pci 0001:00:08.0:   bridge window [mem 0x00000000-0x000fffff pref]
>[    0.081338] pci 0001:03:0c.0: [1166:0240] type 00 class 0x01018f
>[    0.081350] pci 0001:03:0c.0: reg 0x10: [io  0x811000-0x811007]
>[    0.081359] pci 0001:03:0c.0: reg 0x14: [io  0x811000-0x811003]
>[    0.081368] pci 0001:03:0c.0: reg 0x18: [io  0x811000-0x811007]
>[    0.081377] pci 0001:03:0c.0: reg 0x1c: [io  0x811000-0x811003]
>[    0.081386] pci 0001:03:0c.0: reg 0x20: [io  0x811000-0x81100f]
>[    0.081395] pci 0001:03:0c.0: reg 0x24: [mem 0xfa402000-0xfa403fff]
>[    0.081487] pci 0001:03:0d.0: [106b:0050] type 00 class 0xff0000
>[    0.081498] pci 0001:03:0d.0: reg 0x10: [mem 0xfa404000-0xfa407fff]
>[    0.081607] pci 0001:03:0e.0: [106b:0052] type 00 class 0x0c0010
>[    0.081620] pci 0001:03:0e.0: reg 0x10: [mem 0xfa400000-0xfa400fff]
>[    0.081671] pci 0001:03:0e.0: supports D1 D2
>[    0.081675] pci 0001:03:0e.0: PME# supported from D0 D1 D2 D3hot
>[    0.081744] pci 0001:00:09.0: PCI bridge to [bus 03]
>[    0.081754] pci 0001:00:09.0:   bridge window [mem 0xfa400000-0xfa4fffff]
>[    0.081760] pci 0001:00:09.0:   bridge window [mem 0x00000000-0x000fffff pref]
>[    0.081822] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 09
>[    0.081959] PCI 0000:00 Cannot reserve Legacy IO [io  0x10000-0x10fff]
>[    0.081963] PCI 0001:00 Cannot reserve Legacy IO [io  0x811000-0x811fff]
>[    0.081979] pci 0000:00:0b.0: BAR 9: assigned [mem 0xf1000000-0xf10fffff 64bit pref]
>[    0.081983] pci 0000:00:0b.0: PCI bridge to [bus 0a]
>[    0.081988] pci 0000:00:0b.0:   bridge window [io  0x10000-0x1ffff]
>[    0.081994] pci 0000:00:0b.0:   bridge window [mem 0xc0000000-0xefffffff]
>[    0.082000] pci 0000:00:0b.0:   bridge window [mem 0xf1000000-0xf10fffff 64bit pref]
>[    0.082007] pci_bus 0000:00: resource 4 [io  0x10000-0x80ffff]
>[    0.082011] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
>[    0.082015] pci_bus 0000:00: resource 6 [mem 0xc0000000-0xefffffff]
>[    0.082019] pci_bus 0000:0a: resource 0 [io  0x10000-0x1ffff]
>[    0.082023] pci_bus 0000:0a: resource 1 [mem 0xc0000000-0xefffffff]
>[    0.082027] pci_bus 0000:0a: resource 2 [mem 0xf1000000-0xf10fffff 64bit pref]
>[    0.082068] pci 0001:00:01.0: PCI bridge to [bus 04]
>[    0.082076] pci 0001:00:02.0: PCI bridge to [bus 05]
>[    0.082081] pci 0001:00:02.0:   bridge window [mem 0xfa500000-0xfa5fffff]
>[    0.082088] pci 0001:06:00.0: BAR 4: assigned [io  0x811000-0x8110ff]
>[    0.082094] pci 0001:00:03.0: PCI bridge to [bus 06]
>[    0.082099] pci 0001:00:03.0:   bridge window [io  0x811000-0x811fff]
>[    0.082104] pci 0001:00:03.0:   bridge window [mem 0x80100000-0x9fffffff]
>[    0.082109] pci 0001:00:04.0: PCI bridge to [bus 07]
>[    0.082116] pci 0001:00:05.0: PCI bridge to [bus 08]
>[    0.082124] pci 0001:00:06.0: PCI bridge to [bus 09]
>[    0.082129] pci 0001:00:06.0:   bridge window [mem 0xa0000000-0xb20fffff]
>[    0.082135] pci 0001:00:07.0: PCI bridge to [bus 02]
>[    0.082140] pci 0001:00:07.0:   bridge window [mem 0xfa000000-0xfa3fffff]
>[    0.082146] pci 0001:00:08.0: PCI bridge to [bus 01]
>[    0.082151] pci 0001:00:08.0:   bridge window [mem 0x80000000-0x800fffff]
>[    0.082158] pci 0001:00:09.0: PCI bridge to [bus 03]
>[    0.082163] pci 0001:00:09.0:   bridge window [mem 0xfa400000-0xfa4fffff]
>[    0.082170] pci_bus 0001:00: resource 4 [io  0x811000-0xc10fff]
>[    0.082174] pci_bus 0001:00: resource 5 [mem 0xfa000000-0xffffffff]
>[    0.082178] pci_bus 0001:00: resource 6 [mem 0x80000000-0xbfffffff]
>[    0.082182] pci_bus 0001:05: resource 1 [mem 0xfa500000-0xfa5fffff]
>[    0.082186] pci_bus 0001:06: resource 0 [io  0x811000-0x811fff]
>[    0.082190] pci_bus 0001:06: resource 1 [mem 0x80100000-0x9fffffff]
>[    0.082194] pci_bus 0001:09: resource 1 [mem 0xa0000000-0xb20fffff]
>[    0.082198] pci_bus 0001:02: resource 1 [mem 0xfa000000-0xfa3fffff]
>[    0.082202] pci_bus 0001:01: resource 1 [mem 0x80000000-0x800fffff]
>[    0.082207] pci_bus 0001:03: resource 1 [mem 0xfa400000-0xfa4fffff]
>[    0.082209] PCI: Probing PCI hardware done
>[    0.110561] vgaarb: device added: PCI:0001:06:00.0,decodes=io+mem,owns=none,locks=none
>[    0.110570] vgaarb: device added: PCI:0001:09:00.0,decodes=io+mem,owns=none,locks=none
>[    0.110583] vgaarb: loaded
>[    0.110585] vgaarb: bridge control possible 0001:09:00.0
>[    0.110588] vgaarb: bridge control possible 0001:06:00.0
>[    0.110684] SCSI subsystem initialized
>[    0.110735] libata version 3.00 loaded.
>[    0.110816] usbcore: registered new interface driver usbfs
>[    0.110838] usbcore: registered new interface driver hub
>[    0.110856] usbcore: registered new device driver usb
>[    0.110887] pps_core: LinuxPPS API ver. 1 registered
>[    0.110890] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.110900] PTP clock support registered
>[    0.110921] EDAC MC: Ver: 3.0.0
>[    0.111164] Advanced Linux Sound Architecture Driver Initialized.
>[    0.111424] clocksource: Switched to clocksource timebase
>[    0.115166] NET: Registered protocol family 2
>[    0.115347] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.116000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.117362] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.117428] UDP hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.117601] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
>[    0.117872] NET: Registered protocol family 1
>[    0.117917] pci 0001:00:03.0: Found enabled HT MSI Mapping
>[    0.117928] pci 0001:00:04.0: Found enabled HT MSI Mapping
>[    0.117939] pci 0001:00:05.0: Found enabled HT MSI Mapping
>[    0.117950] pci 0001:00:06.0: Found enabled HT MSI Mapping
>[    0.117958] PCI: CLS mismatch (32 != 64), using 128 bytes
>[    0.118007] pci 0001:01:0b.0: enabling device (0000 -> 0002)
>[    0.161439] pci 0001:01:0b.1: enabling device (0000 -> 0002)
>[    0.221430] pci 0001:01:0b.2: enabling device (0004 -> 0006)
>[    0.221533] Unpacking initramfs...
>[    1.729407] Freeing initrd memory: 7136K (c000000001500000 - c000000001bf8000)
>[    1.730040] futex hash table entries: 512 (order: 4, 65536 bytes)
>[    1.730239] workingset: timestamp_bits=60 max_order=22 bucket_order=0
>[    1.734837] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
>[    1.734843] io scheduler noop registered
>[    1.734848] io scheduler deadline registered (default)
>[    1.735198] Using unsupported 1920x1080 NVDA,Display-A at a0020000, depth=8, pitch=2048
>[    1.735313] fb0: Open Firmware frame buffer device on /ht@0,f2000000/pci@6/NVDA,Parent@0/NVDA,Display-A@0
>[    1.735408] pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
>[    1.735594] MacIO PCI driver attached to Shasta chipset
>[    1.736060] 0.00013020:ch-a: ttyPZ0 at MMIO 0x80013020 (irq = 23, base_baud = 230400) is a Z85c30 ESCC - Serial port
>[    1.736252] 0.00013000:ch-b: ttyPZ1 at MMIO 0x80013000 (irq = 24, base_baud = 230400) is a Z85c30 ESCC - Serial port
>[    1.736471] windfarm: initializing for dual-core desktop G5
>[    1.987723] sata_svw 0001:03:0c.0: version 2.3
>[    1.987773] sata_svw 0001:03:0c.0: Using 32-bit DMA via iommu
>[    1.988522] scsi host0: sata_svw
>[    1.988684] scsi host1: sata_svw
>[    1.988822] scsi host2: sata_svw
>[    1.988964] scsi host3: sata_svw
>[    1.989048] ata1: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402000 irq 17
>[    1.989053] ata2: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402100 irq 17
>[    1.989057] ata3: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402200 irq 17
>[    1.989062] ata4: SATA max UDMA/133 mmio m8192@0xfa402000 port 0xfa402300 irq 17
>[    1.989126] pata-pci-macio 0001:03:0d.0: enabling device (0004 -> 0006)
>[    2.001430] pata-pci-macio 0001:03:0d.0: Activating pata-macio chipset Shasta ATA-6, Apple bus ID 3
>[    2.001759] scsi host4: pata_macio
>[    2.001846] ata5: PATA max UDMA/133 irq 38
>[    2.001927] tg3.c:v3.137 (May 11, 2014)
>[    2.026895] tg3 0001:05:04.0: Using 32-bit DMA via iommu
>[    2.027223] tg3 0001:05:04.0 eth0: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:14:51:65:e9:94
>[    2.027229] tg3 0001:05:04.0 eth0: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
>[    2.027234] tg3 0001:05:04.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>[    2.027238] tg3 0001:05:04.0 eth0: dma_rwctrl[76144000] dma_mask[40-bit]
>[    2.048336] tg3 0001:05:04.1: Using 32-bit DMA via iommu
>[    2.048626] tg3 0001:05:04.1 eth1: Tigon3 [partno(BCM95780) rev 8003] (PCIX:133MHz:64-bit) MAC address 00:14:51:65:e9:95
>[    2.048631] tg3 0001:05:04.1 eth1: attached PHY is 5780 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
>[    2.048636] tg3 0001:05:04.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>[    2.048640] tg3 0001:05:04.1 eth1: dma_rwctrl[76144000] dma_mask[40-bit]
>[    2.049815] firewire_ohci 0001:03:0e.0: enabling device (0000 -> 0002)
>[    2.101466] firewire_ohci 0001:03:0e.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
>[    2.101492] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    2.101527] ehci-pci: EHCI PCI platform driver
>[    2.101620] ehci-pci 0001:01:0b.2: EHCI Host Controller
>[    2.101631] ehci-pci 0001:01:0b.2: new USB bus registered, assigned bus number 1
>[    2.101688] ehci-pci 0001:01:0b.2: irq 70, io mem 0x80080000
>[    2.121424] ehci-pci 0001:01:0b.2: USB 2.0 started, EHCI 1.00
>[    2.121495] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.121500] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.121504] usb usb1: Product: EHCI Host Controller
>[    2.121507] usb usb1: Manufacturer: Linux 4.6.0-rc4 ehci_hcd
>[    2.121511] usb usb1: SerialNumber: 0001:01:0b.2
>[    2.121716] hub 1-0:1.0: USB hub found
>[    2.121729] hub 1-0:1.0: 5 ports detected
>[    2.122051] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    2.122077] ohci-pci: OHCI PCI platform driver
>[    2.122116] ohci-pci 0001:01:0b.0: OHCI PCI host controller
>[    2.122124] ohci-pci 0001:01:0b.0: new USB bus registered, assigned bus number 2
>[    2.122147] ohci-pci 0001:01:0b.0: irq 70, io mem 0x80082000
>[    2.201307] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    2.201312] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.201316] usb usb2: Product: OHCI PCI host controller
>[    2.201319] usb usb2: Manufacturer: Linux 4.6.0-rc4 ohci_hcd
>[    2.201323] usb usb2: SerialNumber: 0001:01:0b.0
>[    2.201497] hub 2-0:1.0: USB hub found
>[    2.201511] hub 2-0:1.0: 3 ports detected
>[    2.201729] ohci-pci 0001:01:0b.1: OHCI PCI host controller
>[    2.201740] ohci-pci 0001:01:0b.1: new USB bus registered, assigned bus number 3
>[    2.201761] ohci-pci 0001:01:0b.1: irq 70, io mem 0x80081000
>[    2.281302] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    2.281307] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.281310] usb usb3: Product: OHCI PCI host controller
>[    2.281314] usb usb3: Manufacturer: Linux 4.6.0-rc4 ohci_hcd
>[    2.281318] usb usb3: SerialNumber: 0001:01:0b.1
>[    2.281504] hub 3-0:1.0: USB hub found
>[    2.281518] hub 3-0:1.0: 2 ports detected
>[    2.301583] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    2.321840] ata1.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
>[    2.321844] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>[    2.330207] rtc-generic rtc-generic: rtc core: registered rtc-generic as rtc0
>[    2.330277] PowerMac i2c bus smu 14 registered
>[    2.330330] PowerMac i2c bus smu 11 registered
>[    2.330508] PowerMac i2c bus mac-io 0 registered
>[    2.330596] PowerMac i2c bus mac-io 0 registered
>[    2.330721] PowerMac i2c bus u4 1 registered
>[    2.341425] Registering G5 CPU frequency driver
>[    2.341428] Frequency method: SCOM, Voltage method: GPIO
>[    2.341431] Low: 1150 Mhz, High: 2300 Mhz, Cur: 2300 MHz
>[    2.341818] ata1.00: configured for UDMA/133
>[    2.342012] snd-aoa-fabric-layout: Using PMF GPIOs
>[    2.342295] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD103SI  1118 PQ: 0 ANSI: 5
>[    2.345125] snd-aoa-fabric-layout: platform-onyx-codec-ref doesn't match!
>[    2.345128] snd-aoa: fabric didn't like codec onyx
>[    2.345581] snd-aoa-fabric-layout: can use this codec
>[    2.407083] snd-aoa-codec-onyx: attached to onyx codec via i2c
>[    2.407347] snd-aoa-codec-onyx: created and attached onyx instance
>[    2.408100] NET: Registered protocol family 10
>[    2.408897] NET: Registered protocol family 17
>[    2.409332] registered taskstats version 1
>[    2.432023] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[    2.432100] sd 0:0:0:0: [sda] Write Protect is off
>[    2.432110] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.432146] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.444609]  sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6
>[    2.445600] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.457128] rtc-generic rtc-generic: setting system clock to 2016-04-23 10:20:26 UTC (1461406826)
>[    2.457383] ALSA device list:
>[    2.457388]   #0: SoundByLayout
>[    2.601733] firewire_core 0001:03:0e.0: created device fw0: GUID 003065fffefcb9ce, S800
>[    2.601747] firewire_core 0001:03:0e.0: phy config: new root=ffc1, gap_count=5
>[    2.731440] windfarm: CPUs control loops started.
>[    2.752912] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    2.755687] ata2.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3EA, max UDMA/133
>[    2.755695] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
>[    2.760669] ata2.00: configured for UDMA/133
>[    2.760917] scsi 1:0:0:0: Direct-Access     ATA      Hitachi HDS72101 A3EA PQ: 0 ANSI: 5
>[    2.781457] usb 2-1: new full-speed USB device number 2 using ohci-pci
>[    2.821933] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[    2.822001] sd 1:0:0:0: [sdb] Write Protect is off
>[    2.822011] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    2.822044] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.834212]  sdb: [mac] sdb1 sdb2
>[    2.834776] sd 1:0:0:0: [sdb] Attached SCSI disk
>[    2.991438] usb 3-2: new low-speed USB device number 2 using ohci-pci
>[    3.008468] usb 2-1: New USB device found, idVendor=062a, idProduct=0252
>[    3.008477] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.008485] usb 2-1: Product: USB WheelMouse     
>[    3.008492] usb 2-1: Manufacturer: Logitech 
>[    3.228458] usb 3-2: New USB device found, idVendor=04d9, idProduct=a02e
>[    3.228467] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>[    3.228475] usb 3-2: Product: USB Keyboard
>[    3.558801] sat 0 partition c8: c8 6 2 7f ff 2 ff 1 fb bf 0 41 0 20 0 0 0 7 89 37 0 a0 0 0
>[    3.871428] ata3: failed to resume link (SControl 0)
>[    3.871463] ata3: SATA link down (SStatus 0 SControl 0)
>[    4.182089] sat 0 partition c4: c4 4 1 7f 22 11 e0 e6 ff 55 7b 12 ec 11 0 0
>[    4.921435] ata4: failed to resume link (SControl 0)
>[    4.921467] ata4: SATA link down (SStatus 0 SControl 0)
>[    4.924317] Freeing unused kernel memory: 2072K (c000000000546000 - c00000000074c000)
>[    4.924328] This architecture does not have kernel memory protection.
>[    4.963391] random: systemd-udevd urandom read with 13 bits of entropy available
>[    5.008286] sat 0 partition c9: c9 6 2 7f ff 2 ff 1 fb bf 0 41 0 20 0 0 0 7 89 37 0 a0 0 0
>[    5.028506] hidraw: raw HID events driver (C) Jiri Kosina
>[    5.028650] [drm] Initialized drm 1.1.0 20060810
>[    5.032796] tg3 0001:05:04.1 enP1p5s4f1: renamed from eth1
>[    5.065691] usbcore: registered new interface driver usbhid
>[    5.065696] usbhid: USB HID core driver
>[    5.088390] tg3 0001:05:04.0 enP1p5s4f0: renamed from eth0
>[    5.107549] [drm] radeon kernel modesetting enabled.
>[    5.107632] checking generic (a0020000 21c000) vs hw (90000000 10000000)
>[    5.108105] input: Logitech  USB WheelMouse      as /devices/pci0001:00/0001:00:08.0/0001:01:0b.0/usb2/2-1/2-1:1.0/0003:062A:0252.0001/input/input0
>[    5.108666] radeon 0001:06:00.0: enabling device (0004 -> 0007)
>[    5.109108] hid-generic 0003:062A:0252.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech  USB WheelMouse     ] on usb-0001:01:0b.0-1/input0
>[    5.109458] input: USB Keyboard as /devices/pci0001:00/0001:00:08.0/0001:01:0b.1/usb3/3-2/3-2:1.0/0003:04D9:A02E.0002/input/input1
>[    5.110206] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x174B:0xE164).
>[    5.110225] radeon 0001:06:00.0: Using 32-bit DMA via iommu
>[    5.110235] [drm] register mmio base: 0x80140000
>[    5.110237] [drm] register mmio size: 131072
>[    5.122076] checking generic (a0020000 21c000) vs hw (a0000000 10000000)
>[    5.122082] fb: switching to nouveaufb from OFfb NVDA,Displ
>[    5.122962] nouveau 0001:09:00.0: NVIDIA NV43 (043100a4)
>[    5.123248] u3msi: allocated virq 0x1f (hw 0x8) addr 0xfee00000
>[    5.143278] nouveau 0001:09:00.0: bios: version 05.43.02.75.00
>[    5.167050] hid-generic 0003:04D9:A02E.0002: input,hidraw1: USB HID v1.10 Keyboard [USB Keyboard] on usb-0001:01:0b.1-2/input0
>[    5.171546] input: USB Keyboard as /devices/pci0001:00/0001:00:08.0/0001:01:0b.1/usb3/3-2/3-2:1.1/0003:04D9:A02E.0003/input/input2
>[    5.231541] hid-generic 0003:04D9:A02E.0003: input,hidraw2: USB HID v1.10 Device [USB Keyboard] on usb-0001:01:0b.1-2/input1
>[    5.241476] ATOM BIOS: C26401
>[    5.241553] [drm] GPU not posted. posting now...
>[    5.246002] radeon 0001:06:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
>[    5.246006] radeon 0001:06:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
>[    5.246010] [drm] Detected VRAM RAM=1024M, BAR=256M
>[    5.246012] [drm] RAM width 64bits DDR
>[    5.246118] [TTM] Zone  kernel: Available graphics memory: 5001704 kiB
>[    5.246121] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[    5.246124] [TTM] Initializing pool allocator
>[    5.246161] [drm] radeon: 1024M of VRAM memory ready
>[    5.246164] [drm] radeon: 1024M of GTT memory ready.
>[    5.246168] [drm] Loading CAICOS Microcode
>[    5.246352] [drm] Internal thermal controller without fan control
>[    5.252681] [drm] radeon: dpm initialized
>[    5.252992] [drm] GART: num cpu pages 262144, num gpu pages 262144
>[    5.299020] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
>[    5.299230] radeon 0001:06:00.0: WB enabled
>[    5.299236] radeon 0001:06:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xc0000002de1ebc00
>[    5.299241] radeon 0001:06:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xc0000002de1ebc0c
>[    5.301164] radeon 0001:06:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xd0000800848b2118
>[    5.301171] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    5.301174] [drm] Driver supports precise vblank timestamp query.
>[    5.301177] radeon 0001:06:00.0: radeon: MSI limited to 32-bit
>[    5.301213] u3msi: allocated virq 0x20 (hw 0x9) addr 0xfee00000
>[    5.301240] radeon 0001:06:00.0: radeon: using MSI.
>[    5.301295] [drm] radeon: irq initialized.
>[    5.318674] [drm] ring test on 0 succeeded in 1 usecs
>[    5.318692] [drm] ring test on 3 succeeded in 8 usecs
>[    5.494179] [drm] ring test on 5 succeeded in 2 usecs
>[    5.494192] [drm] UVD initialized successfully.
>[    5.494906] [drm] ib test on ring 0 succeeded in 0 usecs
>[    5.495007] [drm] ib test on ring 3 succeeded in 0 usecs
>[    5.635934] sat 0 partition c5: c5 4 1 7f 22 11 e0 e6 ff 55 7b 12 ec 11 0 0
>[    6.015305] windfarm: Backside control loop started.
>[    6.065721] windfarm: Slots control loop started.
>[    6.141518] [drm] ib test on ring 5 succeeded
>[    6.143192] [drm] Radeon Display Connectors
>[    6.143198] [drm] Connector 0:
>[    6.143203] [drm]   HDMI-A-1
>[    6.143207] [drm]   HPD2
>[    6.143215] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
>[    6.143220] [drm]   Encoders:
>[    6.143225] [drm]     DFP1: INTERNAL_UNIPHY1
>[    6.143230] [drm] Connector 1:
>[    6.143234] [drm]   DVI-D-1
>[    6.143238] [drm]   HPD4
>[    6.143246] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
>[    6.143250] [drm]   Encoders:
>[    6.143255] [drm]     DFP2: INTERNAL_UNIPHY
>[    6.143259] [drm] Connector 2:
>[    6.143264] [drm]   VGA-1
>[    6.143271] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
>[    6.143276] [drm]   Encoders:
>[    6.143281] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[    6.163814] [drm] Initialized radeon 2.43.0 20080528 for 0001:06:00.0 on minor 0
>[    6.164609] nouveau 0001:09:00.0: fb: 256 MiB DDR1
>[    6.170826] windfarm: Drive bay control loop started.
>[    6.232334] nouveau 0001:09:00.0: Using 32-bit DMA via iommu
>[    6.232348] nouveau 0001:09:00.0: DRM: VRAM: 252 MiB
>[    6.232351] nouveau 0001:09:00.0: DRM: GART: 512 MiB
>[    6.232359] nouveau 0001:09:00.0: DRM: TMDS table version 1.1
>[    6.232364] nouveau 0001:09:00.0: DRM: DCB version 3.0
>[    6.232369] nouveau 0001:09:00.0: DRM: DCB outp 00: 01000100 00000028
>[    6.232373] nouveau 0001:09:00.0: DRM: DCB outp 01: 03000102 00000000
>[    6.232378] nouveau 0001:09:00.0: DRM: DCB outp 02: 04011210 00000028
>[    6.232382] nouveau 0001:09:00.0: DRM: DCB outp 03: 02111212 02000100
>[    6.232386] nouveau 0001:09:00.0: DRM: DCB outp 04: 02011211 0020c070
>[    6.232391] nouveau 0001:09:00.0: DRM: DCB conn 00: 1030
>[    6.232395] nouveau 0001:09:00.0: DRM: DCB conn 01: 2130
>[    6.242370] sil164 7-0038: Detected device 1:6.0
>[    6.245868] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    6.245871] [drm] Driver supports precise vblank timestamp query.
>[    6.248246] nouveau 0001:09:00.0: DRM: Setting dpms mode 3 on TV encoder (output 4)
>[    6.248265] [drm] Initialized nouveau 1.3.1 20120801 for 0001:09:00.0 on minor 1
>[   11.439102] EXT4-fs (sda4): mounted filesystem with writeback data mode. Opts: (null)
>[   12.592103] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
>[   12.592447] systemd[1]: Detected architecture ppc64.
>[   12.601170] systemd[1]: Set hostname to <bigmac>.
>[   13.164251] systemd-sysv-generator[152]: stat() failed on /etc/init.d/cron, ignoring: No such file or directory
>[   13.944750] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[   13.945057] systemd[1]: Created slice User and Session Slice.
>[   13.945218] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[   13.945317] systemd[1]: Listening on fsck to fsckd communication Socket.
>[   13.945428] systemd[1]: Listening on Journal Socket (/dev/log).
>[   13.969696] systemd[1]: Listening on udev Kernel Socket.
>[   13.969800] systemd[1]: Listening on Syslog Socket.
>[   13.969843] systemd[1]: Reached target System Time Synchronized.
>[   13.969883] systemd[1]: Reached target Encrypted Volumes.
>[   13.969921] systemd[1]: Reached target Remote File Systems (Pre).
>[   13.970058] systemd[1]: Listening on Journal Socket.
>[   13.970121] systemd[1]: Reached target Swap.
>[   13.970161] systemd[1]: Reached target Remote File Systems.
>[   13.970305] systemd[1]: Created slice System Slice.
>[   14.051901] systemd[1]: Starting Load Kernel Modules...
>[   14.052271] systemd[1]: Created slice system-systemd\x2dfsck.slice.
>[   14.053483] systemd[1]: Starting Journal Service...
>[   14.053548] systemd[1]: Reached target Slices.
>[   14.054060] systemd[1]: Reached target User and Group Name Lookups.
>[   14.054241] systemd[1]: Listening on udev Control Socket.
>[   14.054478] systemd[1]: Created slice system-getty.slice.
>[   14.055782] systemd[1]: Mounting POSIX Message Queue File System...
>[   14.057460] systemd[1]: Starting Create list of required static device nodes for the current kernel...
>[   14.058014] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[   14.247875] systemd[1]: Started Load Kernel Modules.
>[   14.253589] systemd[1]: Started Create list of required static device nodes for the current kernel.
>[   14.281821] systemd[1]: Starting Create Static Device Nodes in /dev...
>[   14.282690] systemd[1]: Starting Apply Kernel Variables...
>[   14.323641] systemd[1]: Started Journal Service.
>[   15.236559] EXT4-fs (sda4): re-mounted. Opts: data=writeback,noauto_da_alloc
>[   15.350134] systemd-journald[161]: Received request to flush runtime journal from PID 1
>[   15.781095] snd_hda_intel 0001:06:00.1: enabling device (0004 -> 0006)
>[   15.781117] snd_hda_intel 0001:06:00.1: Force to snoop mode by module option
>[   15.781729] u3msi: allocated virq 0x21 (hw 0xd) addr 0xfee00000
>[   15.781842] snd_hda_intel 0001:06:00.1: Using 32-bit DMA via iommu
>[   15.838245] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0001:00/0001:00:03.0/0001:06:00.1/sound/card1/input3
>[   16.937625] mousedev: PS/2 mouse device common for all mice
>[   17.750207] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
>[   17.791636] EXT4-fs (sda3): mounted filesystem without journal. Opts: (null)
>[   18.162992] random: nonblocking pool is initialized
>[   18.317752] EXT4-fs (sda5): mounted filesystem with writeback data mode. Opts: data=writeback,noauto_da_alloc
>[   19.229800] cgroup: new mount options do not match the existing superblock, will be ignored
>[   20.013698] zram: Added device: zram0
>[   20.496720] zram0: detected capacity change from 0 to 5121744896
>[   20.752743] Adding 5001700k swap on /dev/zram0.  Priority:5 extents:1 across:5001700k SS
>[   26.288240] IPv6: ADDRCONF(NETDEV_UP): enP1p5s4f0: link is not ready
>[   26.288556] u3msi: allocated virq 0x22 (hw 0xe) addr 0xfee00000
>[   26.332501] IPv6: ADDRCONF(NETDEV_UP): enP1p5s4f0: link is not ready
>[   26.348465] IPv6: ADDRCONF(NETDEV_UP): enP1p5s4f1: link is not ready
>[   26.348779] u3msi: allocated virq 0x24 (hw 0x15) addr 0xfee00000
>[   26.392475] IPv6: ADDRCONF(NETDEV_UP): enP1p5s4f1: link is not ready
>[   26.430182] vgaarb: device changed decodes: PCI:0001:09:00.0,olddecodes=io+mem,decodes=none:owns=none
>[   26.430192] vgaarb: device changed decodes: PCI:0001:06:00.0,olddecodes=io+mem,decodes=none:owns=none
>[   27.050899] nouveau 0001:09:00.0: DRM: 0x14C5: Parsing digital output script table
>[   29.109500] tg3 0001:05:04.0 enP1p5s4f0: Link is up at 1000 Mbps, full duplex
>[   29.109508] tg3 0001:05:04.0 enP1p5s4f0: Flow control is on for TX and on for RX
>[   29.109531] IPv6: ADDRCONF(NETDEV_CHANGE): enP1p5s4f0: link becomes ready

Actions: View

Attachments on bug 95015: 123045 | 123179 | 123548 | 131264

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.