Attachment 123488 Details for Bug 95269 – dmesg output while booted with drm.debug=0xe 3

dmesg output while booted with drm.debug=0xe 3

dmesg.4.6.0-040600rc6-generic.txt (text/plain), 141.47 KB, created by freedesktop on 2016-05-05 08:56:51 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: freedesktop

Created: 2016-05-05 08:56:51 UTC

Size: 141.47 KB

patch

obsolete

>[    0.000000] microcode: microcode updated early to revision 0x22, date = 2015-09-11
>[    0.000000] Linux version 4.6.0-040600rc6-generic (kernel@gloin) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #201605012031 SMP Mon May 2 00:33:26 UTC 2016
>[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.6.0-040600rc6-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 drm.debug=0xe 3
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   Centaur CentaurHauls
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
>[    0.000000] x86/fpu: Using 'eager' FPU context switches.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009bfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009cfff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009dfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca769fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000ca76a000-0x00000000ca969fff] type 20
>[    0.000000] BIOS-e820: [mem 0x00000000ca96a000-0x00000000ccbfefff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ccbff000-0x00000000ccd7efff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000ccd7f000-0x00000000ccdfefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000ccdff000-0x00000000ccdfffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022dffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] efi: EFI v2.31 by Lenovo
>[    0.000000] efi:  ACPI=0xccdfe000  ACPI 2.0=0xccdfe014  SMBIOS=0xccbfe000 
>[    0.000000] SMBIOS 2.7 present.
>[    0.000000] DMI: LENOVO 20CM001QUK/20CM001QUK, BIOS N10ET33W (1.12 ) 04/06/2015
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x22e000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00E0000000 mask 7FF0000000 uncachable
>[    0.000000]   1 base 00D0000000 mask 7FF0000000 uncachable
>[    0.000000]   2 base 00CE000000 mask 7FFE000000 uncachable
>[    0.000000]   3 base 00CD000000 mask 7FFF000000 uncachable
>[    0.000000]   4 base 00CCE00000 mask 7FFFE00000 uncachable
>[    0.000000]   5 base 00F0000000 mask 7FF0000000 uncachable
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
>[    0.000000] e820: last_pfn = 0xcce00 max_arch_pfn = 0x400000000
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0x0320a000, 0x0320afff] PGTABLE
>[    0.000000] BRK [0x0320b000, 0x0320bfff] PGTABLE
>[    0.000000] BRK [0x0320c000, 0x0320cfff] PGTABLE
>[    0.000000] BRK [0x0320d000, 0x0320dfff] PGTABLE
>[    0.000000] BRK [0x0320e000, 0x0320efff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x3384a000-0x35c1cfff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000CCDFE014 000024 (v02 LENOVO)
>[    0.000000] ACPI: XSDT 0x00000000CCDFE1C0 0000F4 (v01 LENOVO TP-N10   00001120 PTEC 00000002)
>[    0.000000] ACPI: FACP 0x00000000CCDF8000 00010C (v05 LENOVO TP-N10   00001120 PTEC 00000002)
>[    0.000000] ACPI: DSDT 0x00000000CCDE3000 010E19 (v01 LENOVO TP-N10   00001120 INTL 20120711)
>[    0.000000] ACPI: FACS 0x00000000CCD68000 000040
>[    0.000000] ACPI: SLIC 0x00000000CCDFD000 000176 (v01 LENOVO TP-N10   00001120 PTEC 00000001)
>[    0.000000] ACPI: ASF! 0x00000000CCDFC000 0000A5 (v32 LENOVO TP-N10   00001120 PTEC 00000002)
>[    0.000000] ACPI: HPET 0x00000000CCDFB000 000038 (v01 LENOVO TP-N10   00001120 PTEC 00000002)
>[    0.000000] ACPI: ECDT 0x00000000CCDFA000 000052 (v01 LENOVO TP-N10   00001120 PTEC 00000002)
>[    0.000000] ACPI: APIC 0x00000000CCDF7000 000098 (v01 LENOVO TP-N10   00001120 PTEC 00000002)
>[    0.000000] ACPI: MCFG 0x00000000CCDF6000 00003C (v01 LENOVO TP-N10   00001120 PTEC 00000002)
>[    0.000000] ACPI: SSDT 0x00000000CCDF5000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000CCDF4000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000CCDE2000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000CCDE1000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000CCDE0000 000691 (v01 LENOVO Cpu0Ist  00003000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000CCDDF000 000B74 (v02 LENOVO CpuSsdt  00003000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000CCDDE000 000369 (v02 LENOVO CtdpB    00001000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000CCDDC000 001475 (v01 LENOVO SaSsdt   00003000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000CCDDB000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711)
>[    0.000000] ACPI: PCCT 0x00000000CCDDA000 00006E (v05 LENOVO TP-N10   00001120 PTEC 00000002)
>[    0.000000] ACPI: SSDT 0x00000000CCDD9000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711)
>[    0.000000] ACPI: TCPA 0x00000000CCDD8000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)
>[    0.000000] ACPI: SSDT 0x00000000CCDD7000 0006A5 (v01 Intel_ TpmTable 00001000 INTL 20120711)
>[    0.000000] ACPI: UEFI 0x00000000CCDD6000 000042 (v01 LENOVO TP-N10   00001120 PTEC 00000002)
>[    0.000000] ACPI: MSDM 0x00000000CCCB1000 000055 (v03 LENOVO TP-N10   00001120 PTEC 00000002)
>[    0.000000] ACPI: BATB 0x00000000CCDD5000 000046 (v01 LENOVO TP-N10   00001120 PTEC 00000002)
>[    0.000000] ACPI: FPDT 0x00000000CCDD4000 000064 (v01 LENOVO TP-N10   00001120 PTEC 00000002)
>[    0.000000] ACPI: UEFI 0x00000000CCDD3000 00030A (v01 LENOVO TP-N10   00001120 PTEC 00000002)
>[    0.000000] ACPI: BGRT 0x00000000CCDD2000 000038 (v01 LENOVO TP-N10   00001120 PTEC 00000002)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022dffffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x22dff9000-0x22dffdfff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000022dffffff]
>[    0.000000]   Device   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
>[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009bfff]
>[    0.000000]   node   0: [mem 0x000000000009d000-0x000000000009dfff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000ca769fff]
>[    0.000000]   node   0: [mem 0x00000000ccdff000-0x00000000ccdfffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000022dffffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022dffffff]
>[    0.000000] On node 0 totalpages: 2066182
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 23 pages reserved
>[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 12894 pages used for memmap
>[    0.000000]   DMA32 zone: 825195 pages, LIFO batch:31
>[    0.000000]   Normal zone: 19328 pages used for memmap
>[    0.000000]   Normal zone: 1236992 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xce000000-0xcfffffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xca76a000-0xca969fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xca96a000-0xccbfefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xccbff000-0xccd7efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xccd7f000-0xccdfefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xcce00000-0xcdffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xce000000-0xcfffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xf80f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
>[    0.000000] e820: [mem 0xd0000000-0xf80f7fff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] percpu: Embedded 33 pages/cpu @ffff88022dc00000 s98008 r8192 d28968 u262144
>[    0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2033873
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.6.0-040600rc6-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 drm.debug=0xe 3
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 7930148K/8264728K available (8469K kernel code, 1295K rwdata, 3664K rodata, 1508K init, 1288K bss, 334580K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
>[    0.000000] NR_IRQS:16640 nr_irqs:760 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2593.997 MHz processor
>[    0.000027] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.99 BogoMIPS (lpj=10375988)
>[    0.000029] pid_max: default: 32768 minimum: 301
>[    0.000034] ACPI: Core revision 20160108
>[    0.017978] ACPI: 12 ACPI AML tables successfully acquired and loaded
>
>[    0.050010] Security Framework initialized
>[    0.050014] Yama: becoming mindful.
>[    0.050021] AppArmor: AppArmor initialized
>[    0.050485] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.052054] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.052811] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.052820] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.053067] CPU: Physical Processor ID: 0
>[    0.053068] CPU: Processor Core ID: 0
>[    0.053072] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.053073] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.053077] mce: CPU supports 7 MCE banks
>[    0.053088] CPU0: Thermal monitoring enabled (TM1)
>[    0.053096] process: using mwait in idle threads
>[    0.053099] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>[    0.053100] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>[    0.053427] Freeing SMP alternatives memory: 32K (ffffffff820be000 - ffffffff820c6000)
>[    0.057631] ftrace: allocating 32399 entries in 127 pages
>[    0.070430] smpboot: Max logical packages: 4
>[    0.070432] smpboot: APIC(0) Converting physical 0 to logical package 0
>[    0.070557] x2apic: IRQ remapping doesn't support X2APIC mode
>[    0.071193] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.110879] TSC deadline timer enabled
>[    0.110882] smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (family: 0x6, model: 0x3d, stepping: 0x4)
>[    0.110896] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
>[    0.110914] ... version:                3
>[    0.110915] ... bit width:              48
>[    0.110916] ... generic registers:      4
>[    0.110917] ... value mask:             0000ffffffffffff
>[    0.110917] ... max period:             0000ffffffffffff
>[    0.110918] ... fixed-purpose events:   3
>[    0.110919] ... event mask:             000000070000000f
>[    0.111717] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.111779] x86: Booting SMP configuration:
>[    0.111780] .... node  #0, CPUs:      #1 #2 #3
>[    0.353017] x86: Booted up 1 node, 4 CPUs
>[    0.353020] smpboot: Total of 4 processors activated (20755.36 BogoMIPS)
>[    0.357398] devtmpfs: initialized
>[    0.357450] x86/mm: Memory block size: 128MB
>[    0.359222] evm: security.selinux
>[    0.359223] evm: security.SMACK64
>[    0.359224] evm: security.SMACK64EXEC
>[    0.359224] evm: security.SMACK64TRANSMUTE
>[    0.359225] evm: security.SMACK64MMAP
>[    0.359226] evm: security.ima
>[    0.359226] evm: security.capability
>[    0.359287] PM: Registering ACPI NVS region [mem 0xccbff000-0xccd7efff] (1572864 bytes)
>[    0.359368] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.359431] pinctrl core: initialized pinctrl subsystem
>[    0.359531] RTC time:  8:33:55, date: 05/05/16
>[    0.359631] NET: Registered protocol family 16
>[    0.369123] cpuidle: using governor ladder
>[    0.381117] cpuidle: using governor menu
>[    0.381131] Error parsing PCC subspaces from PCCT
>[    0.381222] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.381223] ACPI: bus type PCI registered
>[    0.381225] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.381406] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.381407] PCI: not using MMCONFIG
>[    0.381409] PCI: Using configuration type 1 for base access
>[    0.393253] HugeTLB registered 1 GB page size, pre-allocated 0 pages
>[    0.393254] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.393480] ACPI: Added _OSI(Module Device)
>[    0.393481] ACPI: Added _OSI(Processor Device)
>[    0.393482] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.393483] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.393638] ACPI : EC: EC description table is found, configuring boot EC
>[    0.393649] ACPI : EC: EC started
>[    0.397992] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.400451] ACPI: Dynamic OEM Table Load:
>[    0.400460] ACPI: SSDT 0xFFFF880223EB2000 000436 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
>[    0.401077] ACPI: Dynamic OEM Table Load:
>[    0.401084] ACPI: SSDT 0xFFFF880223EB2800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
>[    0.401746] ACPI: Dynamic OEM Table Load:
>[    0.401752] ACPI: SSDT 0xFFFF880223E2E400 000119 (v02 PmRef  ApCst    00003000 INTL 20120711)
>[    0.402735] ACPI: Interpreter enabled
>[    0.402762] ACPI: (supports S0 S3 S4 S5)
>[    0.402763] ACPI: Using IOAPIC for interrupt routing
>[    0.402787] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.403115] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
>[    0.403121] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.405148] ACPI: Power Resource [PUBS] (on)
>[    0.405706] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
>[    0.405963] ACPI: Power Resource [NVP3] (on)
>[    0.405986] ACPI: Power Resource [NVP2] (on)
>[    0.409145] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>[    0.409197] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>[    0.409242] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>[    0.409286] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>[    0.409330] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>[    0.409373] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>[    0.409417] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>[    0.409460] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>[    0.409527] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
>[    0.409531] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.409614] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
>[    0.409651] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
>[    0.409652] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
>[    0.409654] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
>[    0.409655] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
>[    0.409784] PCI host bridge to bus 0000:00
>[    0.409786] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.409788] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.409789] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.409790] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
>[    0.409791] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
>[    0.409792] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
>[    0.409794] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
>[    0.409795] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
>[    0.409796] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
>[    0.409797] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
>[    0.409798] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
>[    0.409799] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window]
>[    0.409801] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
>[    0.409802] pci_bus 0000:00: root bus resource [bus 00-3f]
>[    0.409809] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
>[    0.409881] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
>[    0.409890] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf0ffffff 64bit]
>[    0.409896] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.409901] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.409967] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
>[    0.409975] pci 0000:00:03.0: reg 0x10: [mem 0xf1230000-0xf1233fff 64bit]
>[    0.410059] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
>[    0.410074] pci 0000:00:14.0: reg 0x10: [mem 0xf1220000-0xf122ffff 64bit]
>[    0.410124] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.410149] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.410183] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
>[    0.410200] pci 0000:00:16.0: reg 0x10: [mem 0xf1239000-0xf123901f 64bit]
>[    0.410260] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.410318] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
>[    0.410330] pci 0000:00:19.0: reg 0x10: [mem 0xf1200000-0xf121ffff]
>[    0.410337] pci 0000:00:19.0: reg 0x14: [mem 0xf123e000-0xf123efff]
>[    0.410344] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
>[    0.410392] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.410416] pci 0000:00:19.0: System wakeup disabled by ACPI
>[    0.410449] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
>[    0.410463] pci 0000:00:1b.0: reg 0x10: [mem 0xf1234000-0xf1237fff 64bit]
>[    0.410512] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.410565] pci 0000:00:1c.0: [8086:9c9a] type 01 class 0x060400
>[    0.410619] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.410709] pci 0000:00:1c.1: [8086:9c94] type 01 class 0x060400
>[    0.410770] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.410829] pci 0000:00:1c.1: System wakeup disabled by ACPI
>[    0.410868] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
>[    0.410883] pci 0000:00:1d.0: reg 0x10: [mem 0xf123d000-0xf123d3ff]
>[    0.410959] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.410987] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.411022] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
>[    0.411170] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
>[    0.411181] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
>[    0.411187] pci 0000:00:1f.2: reg 0x14: [io  0x30bc-0x30bf]
>[    0.411193] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
>[    0.411200] pci 0000:00:1f.2: reg 0x1c: [io  0x30b8-0x30bb]
>[    0.411206] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.411212] pci 0000:00:1f.2: reg 0x24: [mem 0xf123c000-0xf123c7ff]
>[    0.411241] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.411292] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
>[    0.411304] pci 0000:00:1f.3: reg 0x10: [mem 0xf1238000-0xf12380ff 64bit]
>[    0.411321] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.411390] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
>[    0.411416] pci 0000:00:1f.6: reg 0x10: [mem 0xf123b000-0xf123bfff 64bit]
>[    0.411605] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
>[    0.411627] pci 0000:02:00.0: reg 0x10: [mem 0xf1100000-0xf1100fff]
>[    0.411756] pci 0000:02:00.0: supports D1 D2
>[    0.411757] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
>[    0.417172] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.417177] pci 0000:00:1c.0:   bridge window [mem 0xf1100000-0xf11fffff]
>[    0.417372] pci 0000:03:00.0: [8086:095b] type 00 class 0x028000
>[    0.417455] pci 0000:03:00.0: reg 0x10: [mem 0xf1000000-0xf1001fff 64bit]
>[    0.417730] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>[    0.425315] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.425319] pci 0000:00:1c.1:   bridge window [mem 0xf1000000-0xf10fffff]
>[    0.426150] ACPI: Enabled 4 GPEs in block 00 to 7F
>[    0.426199] ACPI : EC: GPE = 0x25, I/O: command/status = 0x66, data = 0x62
>[    0.426281] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=mem,locks=none
>[    0.426283] vgaarb: loaded
>[    0.426284] vgaarb: setting as boot device: PCI:0000:00:02.0
>[    0.426285] vgaarb: bridge control possible 0000:00:02.0
>[    0.426485] SCSI subsystem initialized
>[    0.426517] libata version 3.00 loaded.
>[    0.426533] ACPI: bus type USB registered
>[    0.426546] usbcore: registered new interface driver usbfs
>[    0.426552] usbcore: registered new interface driver hub
>[    0.426565] usbcore: registered new device driver usb
>[    0.426705] PCI: Using ACPI for IRQ routing
>[    0.427885] PCI: pci_cache_line_size set to 64 bytes
>[    0.428196] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.428197] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
>[    0.428198] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
>[    0.428199] e820: reserve RAM buffer [mem 0xca76a000-0xcbffffff]
>[    0.428200] e820: reserve RAM buffer [mem 0xcce00000-0xcfffffff]
>[    0.428201] e820: reserve RAM buffer [mem 0x22e000000-0x22fffffff]
>[    0.428292] NetLabel: Initializing
>[    0.428293] NetLabel:  domain hash size = 128
>[    0.428294] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.428306] NetLabel:  unlabeled traffic allowed by default
>[    0.428391] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.428395] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.430420] clocksource: Switched to clocksource hpet
>[    0.435639] VFS: Disk quotas dquot_6.6.0
>[    0.435653] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.435739] AppArmor: AppArmor Filesystem Enabled
>[    0.435793] pnp: PnP ACPI init
>[    0.436093] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>[    0.436095] system 00:00: [mem 0x000e0000-0x000e3fff] has been reserved
>[    0.436097] system 00:00: [mem 0x000e4000-0x000e7fff] has been reserved
>[    0.436098] system 00:00: [mem 0x000e8000-0x000ebfff] has been reserved
>[    0.436099] system 00:00: [mem 0x000ec000-0x000effff] has been reserved
>[    0.436101] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
>[    0.436102] system 00:00: [mem 0x00100000-0xcfffffff] could not be reserved
>[    0.436104] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
>[    0.436105] system 00:00: [mem 0xfed4c000-0xffffffff] has been reserved
>[    0.436108] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.436182] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
>[    0.436201] system 00:01: [io  0x1800-0x189f] could not be reserved
>[    0.436203] system 00:01: [io  0x0800-0x087f] has been reserved
>[    0.436204] system 00:01: [io  0x0880-0x08ff] has been reserved
>[    0.436205] system 00:01: [io  0x0900-0x097f] has been reserved
>[    0.436207] system 00:01: [io  0x0980-0x09ff] has been reserved
>[    0.436208] system 00:01: [io  0x0a00-0x0a7f] has been reserved
>[    0.436209] system 00:01: [io  0x0a80-0x0aff] has been reserved
>[    0.436210] system 00:01: [io  0x0b00-0x0b7f] has been reserved
>[    0.436212] system 00:01: [io  0x0b80-0x0bff] has been reserved
>[    0.436213] system 00:01: [io  0x15e0-0x15ef] has been reserved
>[    0.436214] system 00:01: [io  0x1600-0x167f] has been reserved
>[    0.436216] system 00:01: [io  0x1640-0x165f] has been reserved
>[    0.436218] system 00:01: [mem 0xf8000000-0xfbffffff] could not be reserved
>[    0.436219] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.436221] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.436222] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.436223] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.436225] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
>[    0.436227] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.436276] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.436294] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
>[    0.436311] pnp 00:04: Plug and Play ACPI device, IDs LEN0046 PNP0f13 (active)
>[    0.436604] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
>[    0.436812] system 00:06: [mem 0xd0010000-0xd001ffff] has been reserved
>[    0.436814] system 00:06: [mem 0xd0000000-0xd000ffff] has been reserved
>[    0.436816] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.436840] pnp: PnP ACPI: found 7 devices
>[    0.442704] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.442727] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.442731] pci 0000:00:1c.0:   bridge window [mem 0xf1100000-0xf11fffff]
>[    0.442737] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.442741] pci 0000:00:1c.1:   bridge window [mem 0xf1000000-0xf10fffff]
>[    0.442748] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.442749] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.442751] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.442752] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
>[    0.442753] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
>[    0.442754] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
>[    0.442756] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
>[    0.442757] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
>[    0.442758] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
>[    0.442759] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
>[    0.442760] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
>[    0.442762] pci_bus 0000:00: resource 15 [mem 0xd0000000-0xfebfffff window]
>[    0.442763] pci_bus 0000:00: resource 16 [mem 0xfed40000-0xfed4bfff window]
>[    0.442764] pci_bus 0000:02: resource 1 [mem 0xf1100000-0xf11fffff]
>[    0.442766] pci_bus 0000:03: resource 1 [mem 0xf1000000-0xf10fffff]
>[    0.442791] NET: Registered protocol family 2
>[    0.442953] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.443092] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.443270] TCP: Hash tables configured (established 65536 bind 65536)
>[    0.443297] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.443326] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.443387] NET: Registered protocol family 1
>[    0.443402] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.443765] PCI: CLS 64 bytes, default 64
>[    0.443802] Trying to unpack rootfs image as initramfs...
>[    0.964753] Freeing initrd memory: 36684K (ffff88003384a000 - ffff880035c1d000)
>[    0.964787] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.964790] software IO TLB [mem 0xbb53b000-0xbf53b000] (64MB) mapped at [ffff8800bb53b000-ffff8800bf53afff]
>[    0.964860] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
>[    0.964861] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>[    0.964862] RAPL PMU: hw unit of domain package 2^-14 Joules
>[    0.964862] RAPL PMU: hw unit of domain dram 2^-14 Joules
>[    0.964863] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>[    0.964986] Scanning for low memory corruption every 60 seconds
>[    0.965310] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.965349] audit: initializing netlink subsys (disabled)
>[    0.965360] audit: type=2000 audit(1462437235.928:1): initialized
>[    0.965763] Initialise system trusted keyring
>[    0.965851] workingset: timestamp_bits=37 max_order=21 bucket_order=0
>[    0.967227] zbud: loaded
>[    0.967724] fuse init (API version 7.24)
>[    0.967842] Key type big_key registered
>[    0.968145] Key type asymmetric registered
>[    0.968149] Asymmetric key parser 'x509' registered
>[    0.968177] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
>[    0.968201] io scheduler noop registered
>[    0.968202] io scheduler deadline registered (default)
>[    0.968226] io scheduler cfq registered
>[    0.968495] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.968500] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.968538] efifb: probing for efifb
>[    0.968549] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 8128k, total 8128k
>[    0.968550] efifb: mode is 1920x1080x32, linelength=7680, pages=1
>[    0.968550] efifb: scrolling: redraw
>[    0.968552] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.972374] Console: switching to colour frame buffer device 240x67
>[    0.976090] fb0: EFI VGA frame buffer device
>[    0.976100] intel_idle: MWAIT substates: 0x11142120
>[    0.976101] intel_idle: v0.4.1 model 0x3D
>[    0.976293] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.976432] ACPI: AC Adapter [AC] (on-line)
>[    0.976487] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>[    0.976587] ACPI: Lid Switch [LID]
>[    0.976619] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>[    0.976621] ACPI: Sleep Button [SLPB]
>[    0.976656] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    0.976658] ACPI: Power Button [PWRF]
>[    0.977663] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.977665] ACPI: Thermal Zone [THM0] (56 C)
>[    0.977700] GHES: HEST is not enabled!
>[    0.977808] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>[    0.979235] Linux agpgart interface v0.103
>[    0.984758] ACPI: Battery Slot [BAT0] (battery present)
>[    0.990482] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
>[    0.991761] ACPI: Battery Slot [BAT1] (battery present)
>[    1.050501] tpm_tis 00:05: TPM is disabled/deactivated (0x6)
>[    1.053136] brd: module loaded
>[    1.054030] loop: module loaded
>[    1.054231] libphy: Fixed MDIO Bus: probed
>[    1.054233] tun: Universal TUN/TAP device driver, 1.6
>[    1.054234] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[    1.054265] PPP generic driver version 2.4.2
>[    1.054310] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.054313] ehci-pci: EHCI PCI platform driver
>[    1.054404] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    1.054409] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
>[    1.054427] ehci-pci 0000:00:1d.0: debug port 2
>[    1.058313] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    1.058322] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf123d000
>[    1.066425] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    1.066454] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.066456] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.066457] usb usb1: Product: EHCI Host Controller
>[    1.066458] usb usb1: Manufacturer: Linux 4.6.0-040600rc6-generic ehci_hcd
>[    1.066459] usb usb1: SerialNumber: 0000:00:1d.0
>[    1.066628] hub 1-0:1.0: USB hub found
>[    1.066634] hub 1-0:1.0: 3 ports detected
>[    1.066836] ehci-platform: EHCI generic platform driver
>[    1.066849] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.066852] ohci-pci: OHCI PCI platform driver
>[    1.066861] ohci-platform: OHCI generic platform driver
>[    1.066867] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.066952] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.066957] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.068017] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
>[    1.068020] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.068074] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.068076] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.068077] usb usb2: Product: xHCI Host Controller
>[    1.068078] usb usb2: Manufacturer: Linux 4.6.0-040600rc6-generic xhci-hcd
>[    1.068079] usb usb2: SerialNumber: 0000:00:14.0
>[    1.068241] hub 2-0:1.0: USB hub found
>[    1.068252] hub 2-0:1.0: 11 ports detected
>[    1.071031] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.071034] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    1.071056] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.071057] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.071058] usb usb3: Product: xHCI Host Controller
>[    1.071059] usb usb3: Manufacturer: Linux 4.6.0-040600rc6-generic xhci-hcd
>[    1.071060] usb usb3: SerialNumber: 0000:00:14.0
>[    1.071224] hub 3-0:1.0: USB hub found
>[    1.071231] hub 3-0:1.0: 4 ports detected
>[    1.072429] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>[    1.074119] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.074123] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.074278] mousedev: PS/2 mouse device common for all mice
>[    1.074405] rtc_cmos 00:02: RTC can wake from S4
>[    1.074542] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    1.074566] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    1.074572] i2c /dev entries driver
>[    1.074619] device-mapper: uevent: version 1.0.3
>[    1.074666] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
>[    1.074682] Intel P-state driver initializing.
>[    1.075781] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    1.122558] ledtrig-cpu: registered to indicate activity on CPUs
>[    1.122563] EFI Variables Facility v0.08 2004-May-17
>[    1.138546] NET: Registered protocol family 10
>[    1.138670] NET: Registered protocol family 17
>[    1.138679] Key type dns_resolver registered
>[    1.138823] microcode: CPU0 sig=0x306d4, pf=0x40, revision=0x22
>[    1.138829] microcode: CPU1 sig=0x306d4, pf=0x40, revision=0x22
>[    1.138836] microcode: CPU2 sig=0x306d4, pf=0x40, revision=0x22
>[    1.138843] microcode: CPU3 sig=0x306d4, pf=0x40, revision=0x22
>[    1.138866] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    1.138969] registered taskstats version 1
>[    1.138988] Loading compiled-in X.509 certificates
>[    1.140941] Loaded X.509 cert 'Build time autogenerated kernel key: 30a218538d8a2b23ba803ce5f92a3855d3ab8657'
>[    1.140962] zswap: loaded using pool lzo/zbud
>[    1.142062] Key type trusted registered
>[    1.144149] Key type encrypted registered
>[    1.144155] AppArmor: AppArmor sha1 policy hashing enabled
>[    1.158515] tpm_tis 00:05: A TPM error (6) occurred attempting to read a pcr value
>[    1.158543] ima: No TPM chip found, activating TPM-bypass!
>[    1.158570] evm: HMAC attrs: 0x1
>[    1.159003]   Magic number: 0:245:573
>[    1.159023] event_source intel_bts: hash matches
>[    1.159105] rtc_cmos 00:02: setting system clock to 2016-05-05 08:33:56 UTC (1462437236)
>[    1.159189] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>[    1.159190] EDD information not available.
>[    1.159239] PM: Hibernation image not present or could not be loaded.
>[    1.160105] Freeing unused kernel memory: 1508K (ffffffff81f45000 - ffffffff820be000)
>[    1.160106] Write protecting the kernel read-only data: 14336k
>[    1.160417] Freeing unused kernel memory: 1756K (ffff880002849000 - ffff880002a00000)
>[    1.161133] Freeing unused kernel memory: 432K (ffff880002d94000 - ffff880002e00000)
>[    1.170569] random: systemd-udevd urandom read with 21 bits of entropy available
>[    1.187628] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
>[    1.193929] wmi: Mapper loaded
>[    1.196498] pps_core: LinuxPPS API ver. 1 registered
>[    1.196500] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    1.197796] PTP clock support registered
>[    1.198177] [drm] Initialized drm 1.1.0 20060810
>[    1.198807] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 41
>[    1.202290] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
>[    1.202292] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>[    1.202406] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    1.219756] AVX2 version of gcm_enc/dec engaged.
>[    1.219758] AES CTR mode by8 optimization enabled
>[    1.282633] usb 3-3: new SuperSpeed USB device number 2 using xhci_hcd
>[    1.300153] usb 3-3: New USB device found, idVendor=17ef, idProduct=1010
>[    1.300155] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.300157] usb 3-3: Product: Lenovo ThinkPad Dock   
>[    1.300158] usb 3-3: Manufacturer: LENOVO                 
>[    1.302068] hub 3-3:1.0: USB hub found
>[    1.302186] hub 3-3:1.0: 4 ports detected
>[    1.378472] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.382476] usb 2-3: new high-speed USB device number 2 using xhci_hcd
>[    1.478632] e1000e 0000:00:19.0 eth0: registered PHC clock
>[    1.478634] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 68:f7:28:b2:95:0e
>[    1.478636] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    1.478659] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
>[    1.478688] ahci 0000:00:1f.2: version 3.0
>[    1.478836] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
>[    1.478839] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    1.479447] scsi host0: ahci
>[    1.479574] scsi host1: ahci
>[    1.479666] scsi host2: ahci
>[    1.479728] ata1: SATA max UDMA/133 abar m2048@0xf123c000 port 0xf123c100 irq 43
>[    1.479729] ata2: DUMMY
>[    1.479730] ata3: DUMMY
>[    1.479774] i915 0000:00:02.0: enabling device (0006 -> 0007)
>[    1.480052] [drm:i915_dump_device_info] i915 device info: gen=8, pciid=0x1616 rev=0x09 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    1.480060] [drm:intel_detect_pch] Found LynxPoint LP PCH
>[    1.480121] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 32768K, usable: 31744K
>[    1.480122] [drm] Memory usable by graphics device = 4096M
>[    1.480122] [drm:i915_gem_gtt_init] GMADR size = 256M
>[    1.480123] [drm:i915_gem_gtt_init] GTT stolen size = 32M
>[    1.480124] [drm:i915_gem_gtt_init] ppgtt mode: 3
>[    1.480125] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
>[    1.480126] fb: switching to inteldrmfb from EFI VGA
>[    1.480141] Console: switching to colour dummy device 80x25
>[    1.480183] [drm] Replacing VGA console driver
>[    1.480197] [drm:intel_opregion_setup] graphic opregion physical addr: 0xccd65018
>[    1.480201] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.480201] [drm:intel_opregion_setup] SWSCI supported
>[    1.486323] [drm:swsci_setup] SWSCI BIOS requested (00200383) SBCB callbacks that are not supported (02200705)
>[    1.486325] [drm:swsci_setup] SWSCI GBDA callbacks 00000483, SBCB callbacks 00200383
>[    1.486327] [drm:intel_opregion_setup] ASLE supported
>[    1.486327] [drm:intel_opregion_setup] ASLE extension supported
>[    1.486329] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    1.486462] [drm:intel_device_info_runtime_init] slice total: 1
>[    1.486463] [drm:intel_device_info_runtime_init] subslice total: 3
>[    1.486464] [drm:intel_device_info_runtime_init] subslice per slice: 3
>[    1.486465] [drm:intel_device_info_runtime_init] EU total: 24
>[    1.486466] [drm:intel_device_info_runtime_init] EU per subslice: 8
>[    1.486467] [drm:intel_device_info_runtime_init] has slice power gating: n
>[    1.486467] [drm:intel_device_info_runtime_init] has subslice power gating: n
>[    1.486468] [drm:intel_device_info_runtime_init] has EU power gating: n
>[    1.486470] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.486470] [drm] Driver supports precise vblank timestamp query.
>[    1.486472] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    1.486473] [drm:intel_bios_init] VBT signature "$VBT HASWELL        ", BDB version 189
>[    1.486475] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.486476] [drm:parse_general_definitions] crt_ddc_bus_pin: 0
>[    1.486477] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    1.486479] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.486481] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    1.486482] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[    1.486483] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 220 Hz, active high, min brightness 3, level 255
>[    1.486485] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    1.486486] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.486487] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    1.486489] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.486491] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    1.486492] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[    1.486493] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.486494] [drm:parse_ddi_port] VBT HDMI level shift for port B: 2
>[    1.486495] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.486496] [drm:parse_ddi_port] VBT HDMI level shift for port C: 13
>[    1.486510] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.486514] [drm:intel_power_well_enable] enabling always-on
>[    1.486515] [drm:intel_power_well_enable] enabling display
>[    1.486820] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    1.486822] [drm:intel_print_wm_latency] Primary WM1 latency 50 (25.0 usec)
>[    1.486823] [drm:intel_print_wm_latency] Primary WM2 latency 90 (45.0 usec)
>[    1.486824] [drm:intel_print_wm_latency] Primary WM3 latency 130 (65.0 usec)
>[    1.486824] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    1.486826] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    1.486827] [drm:intel_print_wm_latency] Sprite WM1 latency 50 (25.0 usec)
>[    1.486827] [drm:intel_print_wm_latency] Sprite WM2 latency 90 (45.0 usec)
>[    1.486828] [drm:intel_print_wm_latency] Sprite WM3 latency 130 (65.0 usec)
>[    1.486829] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    1.486830] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    1.486831] [drm:intel_print_wm_latency] Cursor WM1 latency 50 (25.0 usec)
>[    1.486832] [drm:intel_print_wm_latency] Cursor WM2 latency 90 (45.0 usec)
>[    1.486833] [drm:intel_print_wm_latency] Cursor WM3 latency 130 (65.0 usec)
>[    1.486834] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    1.486835] [drm:intel_modeset_init] 3 display pipes available.
>[    1.486848] [drm:intel_update_cdclk] Current CD clock rate: 450000 kHz
>[    1.486849] [drm:intel_update_max_cdclk] Max CD clock rate: 540000 kHz
>[    1.486849] [drm:intel_update_max_cdclk] Max dotclock rate: 540000 kHz
>[    1.486852] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=mem
>[    1.487159] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    1.487200] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000
>[    1.487201] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 50 t9 2000 t10 500 t11_t12 5000
>[    1.487202] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    1.487203] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 5, off delay 200
>[    1.487205] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[    1.487277] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    1.487283] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    1.487686] [drm:intel_dp_get_dpcd] DPCD: 11 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00
>[    1.487969] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel.
>[    1.487970] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no
>[    1.488244] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
>[    1.488246] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    1.488247] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    1.488253] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    1.491443] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.491444] [drm:intel_dp_drrs_init] VBT doesn't support DRRS
>[    1.491449] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 852/852
>[    1.491466] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.491497] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.491583] [drm:intel_dp_init_connector] Adding DP connector on port C
>[    1.491599] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2
>[    1.497798] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: enabled
>[    1.497802] [drm:intel_modeset_readout_hw_state] [CRTC:30] hw state readout: disabled
>[    1.497804] [drm:intel_modeset_readout_hw_state] [CRTC:34] hw state readout: disabled
>[    1.497805] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[    1.497807] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[    1.497808] [drm:intel_modeset_readout_hw_state] SPLL hw state readout: crtc_mask 0x00000000, on 0
>[    1.497812] [drm:intel_modeset_readout_hw_state] [ENCODER:36:TMDS-36] hw state readout: enabled, pipe A
>[    1.497814] [drm:intel_modeset_readout_hw_state] [ENCODER:44:TMDS-44] hw state readout: disabled, pipe A
>[    1.497815] [drm:intel_modeset_readout_hw_state] [ENCODER:46:DP MST-46] hw state readout: disabled, pipe A
>[    1.497816] [drm:intel_modeset_readout_hw_state] [ENCODER:47:DP MST-47] hw state readout: disabled, pipe B
>[    1.497817] [drm:intel_modeset_readout_hw_state] [ENCODER:48:DP MST-48] hw state readout: disabled, pipe C
>[    1.497819] [drm:intel_modeset_readout_hw_state] [ENCODER:51:TMDS-51] hw state readout: disabled, pipe A
>[    1.497820] [drm:intel_modeset_readout_hw_state] [ENCODER:53:DP MST-53] hw state readout: disabled, pipe A
>[    1.497821] [drm:intel_modeset_readout_hw_state] [ENCODER:54:DP MST-54] hw state readout: disabled, pipe B
>[    1.497822] [drm:intel_modeset_readout_hw_state] [ENCODER:55:DP MST-55] hw state readout: disabled, pipe C
>[    1.497824] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:eDP-1] hw state readout: enabled
>[    1.497826] [drm:intel_modeset_readout_hw_state] [CONNECTOR:45:DP-1] hw state readout: disabled
>[    1.497827] [drm:intel_modeset_readout_hw_state] [CONNECTOR:49:HDMI-A-1] hw state readout: disabled
>[    1.497829] [drm:intel_modeset_readout_hw_state] [CONNECTOR:52:DP-2] hw state readout: disabled
>[    1.497830] [drm:intel_modeset_readout_hw_state] [CONNECTOR:56:HDMI-A-2] hw state readout: disabled
>[    1.497842] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff8800356bec00 for pipe A
>[    1.497843] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.497844] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0
>[    1.497845] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.497847] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 4839527, gmch_n: 8388608, link_m: 268862, link_n: 524288, tu: 64
>[    1.497848] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.497849] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.497850] [drm:intel_dump_pipe_config] requested mode:
>[    1.497851] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138459 1920 1968 2000 2106 1080 1083 1088 1095 0x40 0x9
>[    1.497852] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.497854] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138459 1920 1968 2000 2106 1080 1083 1088 1095 0x40 0x9
>[    1.497856] [drm:intel_dump_crtc_timings] crtc timings: 138459 1920 1968 2000 2106 1080 1083 1088 1095, type: 0x40 flags: 0x9
>[    1.497857] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.497857] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.497858] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    1.497859] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.497860] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.497861] [drm:intel_dump_pipe_config] ips: 0
>[    1.497862] [drm:intel_dump_pipe_config] double wide: 0
>[    1.497863] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    1.497864] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.497865] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[    1.497866] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[    1.497867] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    1.497869] [drm:intel_dump_pipe_config] [CRTC:30][setup_hw_state] config ffff8800356bfc00 for pipe B
>[    1.497870] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.497871] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.497872] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.497873] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.497874] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.497875] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.497876] [drm:intel_dump_pipe_config] requested mode:
>[    1.497877] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.497878] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.497879] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.497881] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.497882] [drm:intel_dump_pipe_config] port clock: 0
>[    1.497883] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.497884] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    1.497885] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.497886] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.497887] [drm:intel_dump_pipe_config] ips: 0
>[    1.497888] [drm:intel_dump_pipe_config] double wide: 0
>[    1.497889] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    1.497889] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.497891] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 disabled, scaler_id = 0
>[    1.497892] [drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 disabled, scaler_id = 0
>[    1.497893] [drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = 0
>[    1.497894] [drm:intel_dump_pipe_config] [CRTC:34][setup_hw_state] config ffff8800356ba400 for pipe C
>[    1.497895] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.497896] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.497897] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.497898] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.497899] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.497900] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.497901] [drm:intel_dump_pipe_config] requested mode:
>[    1.497902] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.497903] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.497904] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.497905] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.497906] [drm:intel_dump_pipe_config] port clock: 0
>[    1.497907] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.497908] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    1.497909] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.497910] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.497911] [drm:intel_dump_pipe_config] ips: 0
>[    1.497911] [drm:intel_dump_pipe_config] double wide: 0
>[    1.497912] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    1.497913] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.497914] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 2.0 idx: 6 disabled, scaler_id = 0
>[    1.497915] [drm:intel_dump_pipe_config] CURSOR PLANE:33 plane: 2.3 idx: 7 disabled, scaler_id = 0
>[    1.497916] [drm:intel_dump_pipe_config] STANDARD PLANE:35 plane: 2.1 idx: 8 disabled, scaler_id = 0
>[    1.497921] [drm:intel_power_well_disable] disabling display
>[    1.497926] [drm:hsw_set_power_well] Requesting to disable the power well
>[    1.497930] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    1.497932] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    1.497940] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    1.497944] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff88021f094000
>[    1.497997] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000
>[    1.497999] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, fffff000]
>[    1.499429] [drm:i915_gem_context_init] LR context support initialized
>[    1.499451] [drm:intel_init_pipe_control] render ring pipe control offset: 0x007e9000
>[    1.499507] [drm:gen8_init_common_ring] Execlists enabled for render ring
>[    1.499512] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
>[    1.499515] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
>[    1.499518] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
>[    1.499536] [drm:intel_update_cdclk] Current CD clock rate: 450000 kHz
>[    1.499631] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered
>[    1.499632] [drm:intel_fbdev_init_bios] found possible fb from plane A
>[    1.499633] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping
>[    1.499634] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping
>[    1.499650] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb
>[    1.499652] [drm:intel_fbdev_init_bios] pipe A area: 1920x1080, bpp: 32, size: 8294400
>[    1.499652] [drm:intel_fbdev_init_bios] fb big enough for plane A (8294400 >= 8294400)
>[    1.499653] [drm:intel_fbdev_init_bios] pipe B not active, skipping
>[    1.499654] [drm:intel_fbdev_init_bios] pipe C not active, skipping
>[    1.499655] [drm:intel_fbdev_init_bios] using BIOS fb for initial console
>[    1.499671] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1]
>[    1.499674] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1]
>[    1.499720] [drm:intel_didl_outputs] 8 outputs detected
>[    1.499969] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[    1.500127] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>[    1.500254] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    1.500489] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
>[    1.500560] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
>[    1.500666] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] status updated from unknown to connected
>[    1.500676] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.500678] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes :
>[    1.500680] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138460 1920 1968 2000 2106 1080 1083 1088 1095 0x48 0x9
>[    1.500681] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1]
>[    1.500682] [drm:intel_dp_detect] [CONNECTOR:45:DP-1]
>[    1.500686] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1] status updated from unknown to disconnected
>[    1.500687] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1] disconnected
>[    1.500688] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1]
>[    1.500690] [drm:intel_hdmi_detect] [CONNECTOR:49:HDMI-A-1]
>[    1.510905] usb 1-1: New USB device found, idVendor=8087, idProduct=8001
>[    1.510908] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.511165] hub 1-1:1.0: USB hub found
>[    1.511236] hub 1-1:1.0: 8 ports detected
>[    1.512097] usb 2-3: New USB device found, idVendor=17ef, idProduct=1010
>[    1.512099] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.512100] usb 2-3: Product: Lenovo ThinkPad Dock   
>[    1.512101] usb 2-3: Manufacturer: LENOVO                 
>[    1.512512] hub 2-3:1.0: USB hub found
>[    1.512643] hub 2-3:1.0: 4 ports detected
>[    1.626472] [drm:intel_hdmi_detect] Live status not up!
>[    1.626478] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1] status updated from unknown to disconnected
>[    1.626480] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1] disconnected
>[    1.626483] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:DP-2]
>[    1.626484] [drm:intel_dp_detect] [CONNECTOR:52:DP-2]
>[    1.626936] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 00 15 01 83 02 00 00 00 00 00 04
>[    1.626938] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes
>[    1.626941] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
>[    1.626942] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000
>[    1.626944] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000
>[    1.628073] [drm:intel_dp_probe_oui] Sink OUI: 000000
>[    1.628410] [drm:intel_dp_probe_oui] Branch OUI: 90cc24
>[    1.628723] [drm:intel_dp_probe_mst] Sink is MST capable
>[    1.629936] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:DP-2] status updated from unknown to disconnected
>[    1.629937] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:DP-2] disconnected
>[    1.629940] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:56:HDMI-A-2]
>[    1.629942] [drm:intel_hdmi_detect] [CONNECTOR:56:HDMI-A-2]
>[    1.630093] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    1.630094] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    1.630272] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    1.630274] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.630275] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:56:HDMI-A-2] status updated from unknown to disconnected
>[    1.630275] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:56:HDMI-A-2] disconnected
>[    1.630277] [drm:drm_setup_crtcs] 
>[    1.630279] [drm:drm_enable_connectors] connector 37 enabled? yes
>[    1.630280] [drm:drm_enable_connectors] connector 45 enabled? no
>[    1.630280] [drm:drm_enable_connectors] connector 49 enabled? no
>[    1.630281] [drm:drm_enable_connectors] connector 52 enabled? no
>[    1.630291] [drm:drm_enable_connectors] connector 56 enabled? no
>[    1.630293] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    1.630296] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    1.630297] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080
>[    1.630298] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    1.630299] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.630299] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    1.630300] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    1.630301] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    1.630304] [drm:intelfb_create] re-using BIOS fb
>[    1.630314] [drm:drm_fb_helper_hotplug_event] 
>[    1.630316] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1]
>[    1.630317] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1]
>[    1.630324] [drm:intelfb_create] allocated 1920x1080 fb: 0x00000000, bo ffff88021f094000
>[    1.630399] fbcon: inteldrmfb (fb0) is primary device
>[    1.630613] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[    1.630905] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    1.631325] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.631326] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes :
>[    1.631328] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138460 1920 1968 2000 2106 1080 1083 1088 1095 0x48 0x9
>[    1.631328] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1]
>[    1.631329] [drm:intel_dp_detect] [CONNECTOR:45:DP-1]
>[    1.631332] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1] disconnected
>[    1.631332] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1]
>[    1.631333] [drm:intel_hdmi_detect] [CONNECTOR:49:HDMI-A-1]
>[    1.631453] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[    1.631454] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[    1.631462] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[    1.631939] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[    1.633600] [drm:intel_dp_check_mst_status] got esi2 01 00 00
>[    1.633601] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[    1.634345] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[    1.634346] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[    1.634369] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[    1.634832] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[    1.635761] [drm:drm_dp_send_link_address] link address reply: 4
>[    1.635763] [drm:drm_dp_send_link_address] port 0: input 1, pdt: 1, pn: 0, dpcd_rev: 00, mcs: 1, ddps: 1, ldps 0, sdp 0/0
>[    1.635765] [drm:drm_dp_send_link_address] port 1: input 0, pdt: 0, pn: 1, dpcd_rev: 00, mcs: 0, ddps: 0, ldps 0, sdp 0/0
>[    1.635766] [drm:drm_dp_send_link_address] port 2: input 0, pdt: 4, pn: 2, dpcd_rev: 00, mcs: 0, ddps: 1, ldps 1, sdp 1/1
>[    1.635767] [drm:drm_dp_send_link_address] port 3: input 0, pdt: 0, pn: 3, dpcd_rev: 00, mcs: 0, ddps: 0, ldps 0, sdp 0/0
>[    1.636404] [drm:intel_dp_check_mst_status] got esi2 01 00 00
>[    1.636405] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[    1.686480] usb 2-4: new high-speed USB device number 3 using xhci_hcd
>[    1.758485] [drm:intel_hdmi_detect] Live status not up!
>[    1.758485] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1] disconnected
>[    1.758487] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:DP-2]
>[    1.758488] [drm:intel_dp_detect] [CONNECTOR:52:DP-2]
>[    1.758488] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:DP-2] disconnected
>[    1.758489] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:56:HDMI-A-2]
>[    1.758489] [drm:intel_hdmi_detect] [CONNECTOR:56:HDMI-A-2]
>[    1.758671] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    1.758671] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    1.758850] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    1.758851] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.758852] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:56:HDMI-A-2] disconnected
>[    1.758856] [drm:drm_setup_crtcs] 
>[    1.758857] [drm:drm_enable_connectors] connector 37 enabled? yes
>[    1.758858] [drm:drm_enable_connectors] connector 45 enabled? no
>[    1.758858] [drm:drm_enable_connectors] connector 49 enabled? no
>[    1.758859] [drm:drm_enable_connectors] connector 52 enabled? no
>[    1.758859] [drm:drm_enable_connectors] connector 56 enabled? no
>[    1.758861] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    1.758861] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    1.758863] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080
>[    1.758863] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    1.758864] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.758864] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    1.758864] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    1.758866] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    1.758885] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[    1.758886] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 18
>[    1.758888] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138460KHz
>[    1.758889] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18
>[    1.758889] [drm:intel_dp_compute_config] DP link bw required 249228 available 432000
>[    1.758891] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[    1.758892] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88021f020800 for pipe A
>[    1.758893] [drm:intel_dump_pipe_config] cpu_transcoder: D
>[    1.758893] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[    1.758894] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.758895] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 4839527, gmch_n: 8388608, link_m: 268862, link_n: 524288, tu: 64
>[    1.758896] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.758896] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.758897] [drm:intel_dump_pipe_config] requested mode:
>[    1.758898] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138460 1920 1968 2000 2106 1080 1083 1088 1095 0x48 0x9
>[    1.758898] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.758900] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138460 1920 1968 2000 2106 1080 1083 1088 1095 0x48 0x9
>[    1.758901] [drm:intel_dump_crtc_timings] crtc timings: 138460 1920 1968 2000 2106 1080 1083 1088 1095, type: 0x48 flags: 0x9
>[    1.758901] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.758902] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.758902] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    1.758903] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.758904] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.758905] [drm:intel_dump_pipe_config] ips: 1
>[    1.758905] [drm:intel_dump_pipe_config] double wide: 0
>[    1.758906] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    1.758906] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.758908] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled
>[    1.758910] [drm:intel_dump_pipe_config] 	FB:58, fb = 1920x1080 format = 0x34325258
>[    1.758910] [drm:intel_dump_pipe_config] 	scaler:0 src (0, 0) 1920x1080 dst (0, 0) 1920x1080
>[    1.758911] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[    1.758912] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    1.758914] [drm:intel_modeset_checks] New cdclk calculated to be atomic 337500, actual 337500
>[    1.758923] [drm:intel_power_well_enable] enabling display
>[    1.758926] [drm:hsw_set_power_well] Enabling power well
>[    1.763055] [drm:intel_edp_backlight_off] 
>[    1.789665] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.791301] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[    1.791302] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    1.791369] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
>[    1.791596] ata1.00: supports DRM functions and may not be fully accessible
>[    1.791821] ata1.00: ATA-9: SAMSUNG MZ7LN256HCHP-000L7, EMT03L6Q, max UDMA/133
>[    1.791822] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>[    1.792229] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[    1.792230] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    1.792264] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
>[    1.792449] ata1.00: supports DRM functions and may not be fully accessible
>[    1.792872] ata1.00: configured for UDMA/133
>[    1.793142] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG MZ7LN256 3L6Q PQ: 0 ANSI: 5
>[    1.814653] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.814658] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
>[    1.814709] sd 0:0:0:0: [sda] Write Protect is off
>[    1.814711] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.814732] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.816119]  sda: sda1 sda2 sda3
>[    1.816326] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.816634] usb 2-4: New USB device found, idVendor=0bdb, idProduct=193e
>[    1.816635] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    1.816636] usb 2-4: Product: N5321 gw
>[    1.816637] usb 2-4: Manufacturer: Lenovo
>[    1.816637] usb 2-4: SerialNumber: 7FEF32470598CFM0
>[    1.898481] usb 2-3.4: new high-speed USB device number 4 using xhci_hcd
>[    1.962458] tsc: Refined TSC clocksource calibration: 2593.994 MHz
>[    1.962460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256412811b4, max_idle_ns: 440795306987 ns
>[    1.966480] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    1.966484] [drm:lpt_disable_backlight] cpu backlight was enabled, disabling
>[    1.966491] [drm:intel_disable_pipe] disabling pipe A
>[    1.968740] [drm:edp_panel_off] Turn eDP port A panel power off
>[    1.968745] [drm:wait_panel_off] Wait for panel power off time
>[    1.968748] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[    1.982346] psmouse serio1: synaptics: queried max coordinates: x [..5712], y [..4780]
>[    1.998890] usb 2-3.4: New USB device found, idVendor=17ef, idProduct=100f
>[    1.998891] usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    1.998892] usb 2-3.4: Product: Lenovo ThinkPad Dock
>[    1.998893] usb 2-3.4: Manufacturer: Lenovo
>[    1.998893] usb 2-3.4: SerialNumber: Rev1.2
>[    1.999275] hub 2-3.4:1.0: USB hub found
>[    1.999297] hub 2-3.4:1.0: 3 ports detected
>[    2.013235] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1074..]
>[    2.021216] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x00000012, pins 0x00000010
>[    2.021217] [drm:intel_hpd_irq_handler] digital hpd port A - long
>[    2.021218] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0
>[    2.021234] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A
>[    2.026531] [drm:wait_panel_status] Wait complete
>[    2.030729] [drm:intel_update_cdclk] Current CD clock rate: 337500 kHz
>[    2.030742] [drm:edp_panel_on] Turn eDP port A panel power on
>[    2.030745] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    2.073210] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf002a3/0x943300/0x12e800/0x10000, board id: 3075, fw id: 2560
>[    2.073216] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
>[    2.110516] usb 2-5: new full-speed USB device number 5 using xhci_hcd
>[    2.111885] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
>[    2.574517] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[    2.574519] [drm:wait_panel_status] Wait complete
>[    2.574521] [drm:wait_panel_on] Wait for panel power on
>[    2.574523] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd0003
>[    2.623454] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00000008, dig 0x00000012, pins 0x00000010
>[    2.623455] [drm:intel_hpd_irq_handler] digital hpd port A - long
>[    2.623456] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1
>[    2.623473] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A
>[    2.740058] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
>[    2.775458] [drm:wait_panel_status] Wait complete
>[    2.775466] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    2.775472] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[    2.776515] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.776516] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[    2.776516] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    2.777091] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.777091] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[    2.777092] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    2.777654] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[    2.778527] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[    2.778584] [drm:intel_enable_pipe] enabling pipe A
>[    2.778728] [drm:intel_edp_backlight_on] 
>[    2.778729] [drm:intel_panel_enable_backlight] pipe A
>[    2.778736] [drm:intel_panel_actually_set_backlight] set backlight PWM = 852
>[    2.786601] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
>[    2.788643] [drm:intel_fbc_alloc_cfb] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
>[    2.788644] [drm:intel_fbc_enable] Enabling FBC on pipe A
>[    2.814221] [drm:intel_power_well_disable] disabling display
>[    2.814226] [drm:hsw_set_power_well] Requesting to disable the power well
>[    2.814230] [drm:intel_connector_check_state] [CONNECTOR:37:eDP-1]
>[    2.814233] [drm:check_encoder_state] [ENCODER:36:TMDS-36]
>[    2.814234] [drm:check_encoder_state] [ENCODER:44:TMDS-44]
>[    2.814236] [drm:check_encoder_state] [ENCODER:46:DP MST-46]
>[    2.814236] [drm:check_encoder_state] [ENCODER:47:DP MST-47]
>[    2.814237] [drm:check_encoder_state] [ENCODER:48:DP MST-48]
>[    2.814237] [drm:check_encoder_state] [ENCODER:51:TMDS-51]
>[    2.814238] [drm:check_encoder_state] [ENCODER:53:DP MST-53]
>[    2.814239] [drm:check_encoder_state] [ENCODER:54:DP MST-54]
>[    2.814239] [drm:check_encoder_state] [ENCODER:55:DP MST-55]
>[    2.814241] [drm:check_crtc_state] [CRTC:26]
>[    2.814249] [drm:check_shared_dpll_state] WRPLL 1
>[    2.814250] [drm:check_shared_dpll_state] WRPLL 2
>[    2.814250] [drm:check_shared_dpll_state] SPLL
>[    2.814277] [drm:drm_fb_helper_hotplug_event] 
>[    2.814279] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1]
>[    2.814280] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1]
>[    2.814584] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[    2.814877] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    2.815303] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    2.815305] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes :
>[    2.815307] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138460 1920 1968 2000 2106 1080 1083 1088 1095 0x48 0x9
>[    2.815307] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1]
>[    2.815308] [drm:intel_dp_detect] [CONNECTOR:45:DP-1]
>[    2.815311] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1] disconnected
>[    2.815312] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1]
>[    2.815313] [drm:intel_hdmi_detect] [CONNECTOR:49:HDMI-A-1]
>[    2.832544] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[    2.936896] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
>[    2.942526] [drm:intel_hdmi_detect] Live status not up!
>[    2.942526] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1] disconnected
>[    2.942528] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:DP-2]
>[    2.942529] [drm:intel_dp_detect] [CONNECTOR:52:DP-2]
>[    2.942530] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:DP-2] disconnected
>[    2.942531] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:56:HDMI-A-2]
>[    2.942531] [drm:intel_hdmi_detect] [CONNECTOR:56:HDMI-A-2]
>[    2.942700] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.942701] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.942920] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.942921] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.942923] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:56:HDMI-A-2] disconnected
>[    2.942928] [drm:drm_setup_crtcs] 
>[    2.942930] [drm:drm_enable_connectors] connector 37 enabled? yes
>[    2.942930] [drm:drm_enable_connectors] connector 45 enabled? no
>[    2.942930] [drm:drm_enable_connectors] connector 49 enabled? no
>[    2.942931] [drm:drm_enable_connectors] connector 52 enabled? no
>[    2.942931] [drm:drm_enable_connectors] connector 56 enabled? no
>[    2.942933] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    2.942933] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    2.942935] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080
>[    2.942935] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    2.942936] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    2.942936] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    2.942937] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    2.942938] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    2.943056] Console: switching to colour frame buffer device 240x67
>[    2.946365] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.947675] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[    2.947678] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[    2.947696] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[    2.948163] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[    2.948494] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    2.948514] [drm:drm_dp_send_enum_path_resources] enum path resources 2: 594 594
>[    2.948713] [drm:drm_fb_helper_hotplug_event] 
>[    2.948715] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1]
>[    2.948717] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1]
>[    2.949143] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    2.949161] [drm:intel_dp_check_mst_status] got esi2 01 00 00
>[    2.949163] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[    2.949450] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[    2.949739] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    2.950158] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    2.950160] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes :
>[    2.950172] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138460 1920 1968 2000 2106 1080 1083 1088 1095 0x48 0x9
>[    2.950173] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1]
>[    2.950173] [drm:intel_dp_detect] [CONNECTOR:45:DP-1]
>[    2.950177] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1] disconnected
>[    2.950178] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1]
>[    2.950181] [drm:intel_hdmi_detect] [CONNECTOR:49:HDMI-A-1]
>[    2.962483] clocksource: Switched to clocksource tsc
>[    3.074513] [drm:intel_hdmi_detect] Live status not up!
>[    3.074513] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1] disconnected
>[    3.074515] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:DP-2]
>[    3.074516] [drm:intel_dp_detect] [CONNECTOR:52:DP-2]
>[    3.074517] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:DP-2] disconnected
>[    3.074518] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:56:HDMI-A-2]
>[    3.074518] [drm:intel_hdmi_detect] [CONNECTOR:56:HDMI-A-2]
>[    3.074766] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.074766] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.075006] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.075009] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.075011] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:56:HDMI-A-2] disconnected
>[    3.075013] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:DP-3]
>[    3.075015] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:DP-3] status updated from unknown to disconnected
>[    3.075017] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:DP-3] disconnected
>[    3.075017] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:DP-4]
>[    3.075018] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:DP-4] status updated from unknown to connected
>[    3.076354] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[    3.076355] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[    3.076395] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[    3.076871] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[    3.077846] [drm:intel_dp_check_mst_status] got esi2 01 00 00
>[    3.077847] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[    3.079596] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[    3.079597] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[    3.079639] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[    3.080119] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[    3.081756] [drm:intel_dp_check_mst_status] got esi2 01 00 00
>[    3.081757] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[    3.082662] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[    3.082664] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[    3.082715] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[    3.083179] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[    3.084822] [drm:intel_dp_check_mst_status] got esi2 01 00 00
>[    3.084822] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[    3.085674] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[    3.085675] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[    3.085709] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[    3.086186] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[    3.087207] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    3.087214] [drm:drm_mode_debug_printmodeline] Modeline 67:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    3.087215] [drm:drm_mode_prune_invalid] Not using 1920x1200 mode: VIRTUAL_Y
>[    3.087217] [drm:drm_mode_debug_printmodeline] Modeline 72:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    3.087217] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y
>[    3.087220] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:DP-4] probed modes :
>[    3.087222] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x40 0x5
>[    3.087224] [drm:drm_mode_debug_printmodeline] Modeline 77:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    3.087225] [drm:drm_mode_debug_printmodeline] Modeline 70:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    3.087227] [drm:drm_mode_debug_printmodeline] Modeline 69:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[    3.087229] [drm:drm_mode_debug_printmodeline] Modeline 83:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    3.087230] [drm:drm_mode_debug_printmodeline] Modeline 68:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
>[    3.087232] [drm:drm_mode_debug_printmodeline] Modeline 78:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    3.087234] [drm:drm_mode_debug_printmodeline] Modeline 79:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    3.087235] [drm:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    3.087237] [drm:drm_mode_debug_printmodeline] Modeline 81:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[    3.087239] [drm:drm_mode_debug_printmodeline] Modeline 82:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    3.087240] [drm:drm_mode_debug_printmodeline] Modeline 73:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    3.087242] [drm:drm_mode_debug_printmodeline] Modeline 74:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    3.087243] [drm:drm_mode_debug_printmodeline] Modeline 75:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    3.087245] [drm:drm_mode_debug_printmodeline] Modeline 76:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    3.087247] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:DP-5]
>[    3.087248] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:DP-5] status updated from unknown to disconnected
>[    3.087249] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:DP-5] disconnected
>[    3.087253] [drm:drm_setup_crtcs] 
>[    3.087255] [drm:drm_enable_connectors] connector 37 enabled? yes
>[    3.087255] [drm:drm_enable_connectors] connector 45 enabled? no
>[    3.087256] [drm:drm_enable_connectors] connector 49 enabled? no
>[    3.087257] [drm:drm_enable_connectors] connector 52 enabled? no
>[    3.087257] [drm:drm_enable_connectors] connector 56 enabled? no
>[    3.087258] [drm:drm_enable_connectors] connector 59 enabled? no
>[    3.087258] [drm:drm_enable_connectors] connector 62 enabled? yes
>[    3.087259] [drm:drm_enable_connectors] connector 64 enabled? no
>[    3.087261] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    3.087261] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    3.087263] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080
>[    3.087263] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    3.087264] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    3.087264] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    3.087265] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    3.087266] [drm:intel_fb_initial_config] connector DP-3 not enabled, skipping
>[    3.087266] [drm:intel_fb_initial_config] connector DP-4 has no encoder or crtc, skipping
>[    3.087267] [drm:intel_fb_initial_config] connector DP-5 not enabled, skipping
>[    3.087267] [drm:intel_fb_initial_config] fallback: Not all outputs enabled
>[    3.087268] [drm:intel_fb_initial_config] Enabled: 1, detected: 2
>[    3.087268] [drm:intel_fb_initial_config] Not using firmware configuration
>[    3.087270] [drm:drm_target_preferred] looking for cmdline mode on connector 37
>[    3.087270] [drm:drm_target_preferred] looking for preferred mode on connector 37 0
>[    3.087271] [drm:drm_target_preferred] found mode 1920x1080
>[    3.087271] [drm:drm_target_preferred] looking for cmdline mode on connector 62
>[    3.087272] [drm:drm_target_preferred] looking for preferred mode on connector 62 0
>[    3.087273] [drm:drm_target_preferred] found mode 1280x1024
>[    3.087273] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
>[    3.087277] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    3.087278] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 30 (0,0)
>[    3.087296] [drm:connected_sink_compute_bpp] [CONNECTOR:62:DP-4] checking for sink bpp constrains
>[    3.087297] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 18
>[    3.087300] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[    3.087301] [drm:intel_dump_pipe_config] [CRTC:30][modeset] config ffff88021f02c800 for pipe B
>[    3.087302] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    3.087303] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    3.087304] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.087305] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 1835008, gmch_n: 8388608, link_m: 305834, link_n: 1048576, tu: 15
>[    3.087306] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    3.087307] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    3.087307] [drm:intel_dump_pipe_config] requested mode:
>[    3.087309] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x40 0x5
>[    3.087310] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.087311] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x40 0x5
>[    3.087313] [drm:intel_dump_crtc_timings] crtc timings: 157500 1280 1344 1504 1728 1024 1025 1028 1072, type: 0x40 flags: 0x5
>[    3.087313] [drm:intel_dump_pipe_config] port clock: 540000
>[    3.087314] [drm:intel_dump_pipe_config] pipe src size: 1280x1024
>[    3.087315] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    3.087316] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.087316] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.087317] [drm:intel_dump_pipe_config] ips: 0
>[    3.087317] [drm:intel_dump_pipe_config] double wide: 0
>[    3.087318] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    3.087319] [drm:intel_dump_pipe_config] planes on this crtc
>[    3.087320] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 disabled, scaler_id = 0
>[    3.087321] [drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 disabled, scaler_id = 0
>[    3.087322] [drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = 0
>[    3.087323] [drm:intel_modeset_checks] New cdclk calculated to be atomic 337500, actual 337500
>[    3.087334] [drm:intel_power_well_enable] enabling display
>[    3.087336] [drm:hsw_set_power_well] Enabling power well
>[    3.089413] [drm:intel_mst_pre_enable_dp] 0
>[    3.089878] [drm:intel_dp_check_mst_status] got esi2 01 00 00
>[    3.089879] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[    3.091534] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    3.091534] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[    3.091535] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    3.110349] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[    3.131228] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[    3.131687] [drm:drm_dp_mst_allocate_vcpi] initing vcpi for 564 15
>[    3.133856] [drm:intel_enable_pipe] enabling pipe B
>[    3.134215] [drm:intel_mst_enable_dp] 1
>[    3.135429] [drm:drm_dp_update_payload_part2] payload 0 1
>[    3.136757] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[    3.136758] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[    3.136790] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[    3.139328] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[    3.144233] [drm:intel_dp_check_mst_status] got esi2 01 00 00
>[    3.144233] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[    3.145240] [drm:intel_connector_check_state] [CONNECTOR:37:eDP-1]
>[    3.145242] [drm:intel_connector_check_state] [CONNECTOR:62:DP-4]
>[    3.145242] [drm:check_encoder_state] [ENCODER:36:TMDS-36]
>[    3.145243] [drm:check_encoder_state] [ENCODER:44:TMDS-44]
>[    3.145244] [drm:check_encoder_state] [ENCODER:46:DP MST-46]
>[    3.145245] [drm:check_encoder_state] [ENCODER:47:DP MST-47]
>[    3.145245] [drm:check_encoder_state] [ENCODER:48:DP MST-48]
>[    3.145245] [drm:check_encoder_state] [ENCODER:51:TMDS-51]
>[    3.145246] [drm:check_encoder_state] [ENCODER:53:DP MST-53]
>[    3.145248] [drm:check_encoder_state] [ENCODER:54:DP MST-54]
>[    3.145248] [drm:check_encoder_state] [ENCODER:55:DP MST-55]
>[    3.145249] [drm:check_crtc_state] [CRTC:30]
>[    3.145256] [drm:check_shared_dpll_state] WRPLL 1
>[    3.145257] [drm:check_shared_dpll_state] WRPLL 2
>[    3.145257] [drm:check_shared_dpll_state] SPLL
>[    3.148343] [drm:drm_fb_helper_hotplug_event] 
>[    3.148345] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1]
>[    3.148346] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1]
>[    3.148633] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[    3.148916] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    3.149325] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    3.149327] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes :
>[    3.149339] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138460 1920 1968 2000 2106 1080 1083 1088 1095 0x48 0x9
>[    3.149340] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1]
>[    3.149340] [drm:intel_dp_detect] [CONNECTOR:45:DP-1]
>[    3.149344] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1] disconnected
>[    3.149345] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1]
>[    3.149346] [drm:intel_hdmi_detect] [CONNECTOR:49:HDMI-A-1]
>[    3.195245] [drm:i915_gem_open] 
>[    3.274478] [drm:intel_hdmi_detect] Live status not up!
>[    3.274483] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1] disconnected
>[    3.274487] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:DP-2]
>[    3.274488] [drm:intel_dp_detect] [CONNECTOR:52:DP-2]
>[    3.274489] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:DP-2] disconnected
>[    3.274490] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:56:HDMI-A-2]
>[    3.274491] [drm:intel_hdmi_detect] [CONNECTOR:56:HDMI-A-2]
>[    3.274680] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.274682] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.274885] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.274889] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.274892] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:56:HDMI-A-2] disconnected
>[    3.274894] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:DP-3]
>[    3.274896] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:DP-3] disconnected
>[    3.274897] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:DP-4]
>[    3.332258] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[    3.332263] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[    3.332317] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[    3.334877] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[    3.339212] [drm:intel_dp_check_mst_status] got esi2 01 00 00
>[    3.339214] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[    3.340929] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[    3.340932] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[    3.340952] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[    3.343515] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[    3.348956] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[    3.348958] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[    3.350490] [drm:intel_dp_check_mst_status] got esi2 01 10 00
>[    3.350495] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[    3.355933] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[    3.355935] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[    3.357490] [drm:intel_dp_check_mst_status] got esi2 01 10 00
>[    3.357493] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[    3.361516] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    3.361529] [drm:drm_mode_debug_printmodeline] Modeline 57:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    3.361530] [drm:drm_mode_prune_invalid] Not using 1920x1200 mode: VIRTUAL_Y
>[    3.361533] [drm:drm_mode_debug_printmodeline] Modeline 89:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    3.361535] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y
>[    3.361538] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:DP-4] probed modes :
>[    3.361541] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x40 0x5
>[    3.361543] [drm:drm_mode_debug_printmodeline] Modeline 77:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    3.361546] [drm:drm_mode_debug_printmodeline] Modeline 70:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    3.361549] [drm:drm_mode_debug_printmodeline] Modeline 69:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[    3.361552] [drm:drm_mode_debug_printmodeline] Modeline 83:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    3.361554] [drm:drm_mode_debug_printmodeline] Modeline 68:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
>[    3.361557] [drm:drm_mode_debug_printmodeline] Modeline 78:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    3.361560] [drm:drm_mode_debug_printmodeline] Modeline 79:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    3.361562] [drm:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    3.361565] [drm:drm_mode_debug_printmodeline] Modeline 81:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[    3.361568] [drm:drm_mode_debug_printmodeline] Modeline 82:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    3.361570] [drm:drm_mode_debug_printmodeline] Modeline 73:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    3.361573] [drm:drm_mode_debug_printmodeline] Modeline 74:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    3.361576] [drm:drm_mode_debug_printmodeline] Modeline 75:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    3.361578] [drm:drm_mode_debug_printmodeline] Modeline 76:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    3.361581] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:DP-5]
>[    3.361582] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:DP-5] disconnected
>[    3.361588] [drm:drm_setup_crtcs] 
>[    3.361593] [drm:drm_enable_connectors] connector 37 enabled? yes
>[    3.361595] [drm:drm_enable_connectors] connector 45 enabled? no
>[    3.361596] [drm:drm_enable_connectors] connector 49 enabled? no
>[    3.361597] [drm:drm_enable_connectors] connector 52 enabled? no
>[    3.361599] [drm:drm_enable_connectors] connector 56 enabled? no
>[    3.361600] [drm:drm_enable_connectors] connector 59 enabled? no
>[    3.361602] [drm:drm_enable_connectors] connector 62 enabled? yes
>[    3.361603] [drm:drm_enable_connectors] connector 64 enabled? no
>[    3.361606] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    3.361607] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    3.361609] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080
>[    3.361611] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    3.361612] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    3.361614] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    3.361615] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    3.361616] [drm:intel_fb_initial_config] connector DP-3 not enabled, skipping
>[    3.361618] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-4
>[    3.361619] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-4 0
>[    3.361621] [drm:intel_fb_initial_config] using first mode listed on connector DP-4
>[    3.361622] [drm:intel_fb_initial_config] connector DP-4 on pipe B [CRTC:30]: 1280x1024
>[    3.361624] [drm:intel_fb_initial_config] connector DP-5 not enabled, skipping
>[    3.361626] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    3.361628] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 30 (0,0)
>[    3.361693] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[8] ENCODERS[9]
>[    3.361702] [drm:drm_mode_getresources] [CRTC:26:crtc-0]
>[    3.361704] [drm:drm_mode_getresources] [CRTC:30:crtc-1]
>[    3.361705] [drm:drm_mode_getresources] [CRTC:34:crtc-2]
>[    3.361706] [drm:drm_mode_getresources] [ENCODER:36:TMDS-36]
>[    3.361708] [drm:drm_mode_getresources] [ENCODER:44:TMDS-44]
>[    3.361709] [drm:drm_mode_getresources] [ENCODER:46:DP MST-46]
>[    3.361710] [drm:drm_mode_getresources] [ENCODER:47:DP MST-47]
>[    3.361712] [drm:drm_mode_getresources] [ENCODER:48:DP MST-48]
>[    3.361713] [drm:drm_mode_getresources] [ENCODER:51:TMDS-51]
>[    3.361714] [drm:drm_mode_getresources] [ENCODER:53:DP MST-53]
>[    3.361716] [drm:drm_mode_getresources] [ENCODER:54:DP MST-54]
>[    3.361717] [drm:drm_mode_getresources] [ENCODER:55:DP MST-55]
>[    3.361719] [drm:drm_mode_getresources] [CONNECTOR:37:eDP-1]
>[    3.361720] [drm:drm_mode_getresources] [CONNECTOR:45:DP-1]
>[    3.361721] [drm:drm_mode_getresources] [CONNECTOR:49:HDMI-A-1]
>[    3.361723] [drm:drm_mode_getresources] [CONNECTOR:52:DP-2]
>[    3.361724] [drm:drm_mode_getresources] [CONNECTOR:56:HDMI-A-2]
>[    3.361725] [drm:drm_mode_getresources] [CONNECTOR:59:DP-3]
>[    3.361727] [drm:drm_mode_getresources] [CONNECTOR:62:DP-4]
>[    3.361728] [drm:drm_mode_getresources] [CONNECTOR:64:DP-5]
>[    3.361730] [drm:drm_mode_getresources] CRTC[3] CONNECTORS[8] ENCODERS[9]
>[    3.361738] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[    3.361740] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1]
>[    3.361741] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1]
>[    3.362691] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[    3.362980] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    3.363397] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    3.363400] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes :
>[    3.363403] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138460 1920 1968 2000 2106 1080 1083 1088 1095 0x48 0x9
>[    3.363406] [drm:drm_mode_getconnector] [CONNECTOR:37:?]
>[    3.363536] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.363974] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.364844] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.364852] [drm:intel_dp_check_mst_status] got esi2 01 00 00
>[    3.364853] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[    3.364860] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[    3.366079] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.366706] [drm:drm_mode_getconnector] [CONNECTOR:45:?]
>[    3.366708] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1]
>[    3.366710] [drm:intel_dp_detect] [CONNECTOR:45:DP-1]
>[    3.366717] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1] disconnected
>[    3.366719] [drm:drm_mode_getconnector] [CONNECTOR:45:?]
>[    3.366721] [drm:drm_mode_getconnector] [CONNECTOR:49:?]
>[    3.366722] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1]
>[    3.366723] [drm:intel_hdmi_detect] [CONNECTOR:49:HDMI-A-1]
>[    3.367399] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.367408] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[    3.494514] [drm:intel_hdmi_detect] Live status not up!
>[    3.494517] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1] disconnected
>[    3.494527] [drm:drm_mode_getconnector] [CONNECTOR:49:?]
>[    3.494531] [drm:drm_mode_getconnector] [CONNECTOR:52:?]
>[    3.494533] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:DP-2]
>[    3.494534] [drm:intel_dp_detect] [CONNECTOR:52:DP-2]
>[    3.494535] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:DP-2] disconnected
>[    3.494536] [drm:drm_mode_getconnector] [CONNECTOR:52:?]
>[    3.494538] [drm:drm_mode_getconnector] [CONNECTOR:56:?]
>[    3.494539] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:56:HDMI-A-2]
>[    3.494540] [drm:intel_hdmi_detect] [CONNECTOR:56:HDMI-A-2]
>[    3.494740] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.494742] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.494990] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.494994] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.494997] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:56:HDMI-A-2] disconnected
>[    3.495004] [drm:drm_mode_getconnector] [CONNECTOR:56:?]
>[    3.495015] [drm:drm_mode_getconnector] [CONNECTOR:59:?]
>[    3.495016] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:DP-3]
>[    3.495018] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:DP-3] disconnected
>[    3.495020] [drm:drm_mode_getconnector] [CONNECTOR:59:?]
>[    3.495022] [drm:drm_mode_getconnector] [CONNECTOR:62:?]
>[    3.495023] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:DP-4]
>[    3.496332] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[    3.496334] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[    3.496342] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[    3.498001] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.498885] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.498894] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[    3.500225] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.501132] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.501912] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.502349] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.503231] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.503240] [drm:intel_dp_check_mst_status] got esi2 01 00 00
>[    3.503242] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[    3.504948] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[    3.504950] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[    3.504956] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[    3.507493] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[    3.508821] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.509261] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.510157] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.510597] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.512402] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.512946] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[    3.512948] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[    3.513188] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.514510] [drm:intel_dp_check_mst_status] got esi2 01 10 00
>[    3.514512] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[    3.514945] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.515842] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.517614] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.518974] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.519411] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.519940] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[    3.519941] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[    3.520191] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.520627] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.521513] [drm:intel_dp_check_mst_status] got esi2 01 10 00
>[    3.521514] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[    3.521946] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.522842] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.525498] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.525530] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    3.525542] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:DP-4] probed modes :
>[    3.525546] [drm:drm_mode_debug_printmodeline] Modeline 66:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    3.525549] [drm:drm_mode_debug_printmodeline] Modeline 89:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    3.525551] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x40 0x5
>[    3.525554] [drm:drm_mode_debug_printmodeline] Modeline 77:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    3.525557] [drm:drm_mode_debug_printmodeline] Modeline 70:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    3.525559] [drm:drm_mode_debug_printmodeline] Modeline 69:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[    3.525562] [drm:drm_mode_debug_printmodeline] Modeline 83:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    3.525565] [drm:drm_mode_debug_printmodeline] Modeline 68:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
>[    3.525568] [drm:drm_mode_debug_printmodeline] Modeline 78:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    3.525570] [drm:drm_mode_debug_printmodeline] Modeline 79:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    3.525573] [drm:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    3.525576] [drm:drm_mode_debug_printmodeline] Modeline 81:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[    3.525578] [drm:drm_mode_debug_printmodeline] Modeline 82:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    3.525581] [drm:drm_mode_debug_printmodeline] Modeline 73:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    3.525583] [drm:drm_mode_debug_printmodeline] Modeline 74:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    3.525586] [drm:drm_mode_debug_printmodeline] Modeline 75:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    3.525589] [drm:drm_mode_debug_printmodeline] Modeline 76:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    3.525595] [drm:drm_mode_getconnector] [CONNECTOR:62:?]
>[    3.526399] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.527533] [drm:drm_mode_getconnector] [CONNECTOR:64:?]
>[    3.527536] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:DP-5]
>[    3.527539] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:DP-5] disconnected
>[    3.527541] [drm:drm_mode_getconnector] [CONNECTOR:64:?]
>[    3.527560] [drm:drm_mode_addfb2] [FB:85]
>[    3.528507] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.528518] [drm:intel_dp_check_mst_status] got esi2 01 00 00
>[    3.528519] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[    3.528526] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[    3.528959] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.529726] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.530161] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.531027] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[    3.531035] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[    3.553613] [drm:drm_mode_addfb2] [FB:85]
>[    3.553633] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[    3.553636] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1]
>[    3.561570] [drm:drm_mode_addfb2] [FB:67]
>[    3.561586] [drm:drm_mode_setcrtc] [CRTC:30:crtc-1]
>[    3.561588] [drm:drm_mode_setcrtc] [CONNECTOR:62:DP-4]
>[    3.570636] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[    3.570640] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1]
>[    3.571831] [drm:drm_mode_setcrtc] [CRTC:30:crtc-1]
>[    3.571833] [drm:drm_mode_setcrtc] [CONNECTOR:62:DP-4]
>[    6.370509] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[    6.370517] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    7.255301] usb 2-5: New USB device found, idVendor=04f3, idProduct=0301
>[    7.255304] usb 2-5: New USB device strings: Mfr=4, Product=14, SerialNumber=0
>[    7.255307] usb 2-5: Product: Touchscreen
>[    7.255309] usb 2-5: Manufacturer: ELAN
>[    7.258290] hidraw: raw HID events driver (C) Jiri Kosina
>[    7.265554] usbcore: registered new interface driver usbhid
>[    7.265556] usbhid: USB HID core driver
>[    7.422418] usb 2-6: new full-speed USB device number 6 using xhci_hcd
>[    7.609797] usb 2-6: New USB device found, idVendor=138a, idProduct=0017
>[    7.609799] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
>[    7.609801] usb 2-6: SerialNumber: f92fc3fa7625
>[    7.774417] usb 2-7: new full-speed USB device number 7 using xhci_hcd
>[    7.903580] usb 2-7: New USB device found, idVendor=8087, idProduct=0a2a
>[    7.903582] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    8.070417] usb 2-8: new high-speed USB device number 8 using xhci_hcd
>[    8.208054] usb 2-8: New USB device found, idVendor=5986, idProduct=0366
>[    8.208056] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    8.208057] usb 2-8: Product: Integrated Camera
>[    8.208059] usb 2-8: Manufacturer: SunplusIT Inc
>[    8.370459] random: nonblocking pool is initialized
>[    8.426417] usb 2-3.4.2: new low-speed USB device number 9 using xhci_hcd
>[    8.518749] usb 2-3.4.2: New USB device found, idVendor=15ca, idProduct=00c3
>[    8.518751] usb 2-3.4.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>[    8.518753] usb 2-3.4.2: Product: USB Optical Mouse
>[    8.523171] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.4/2-3.4.2/2-3.4.2:1.0/0003:15CA:00C3.0002/input/input8
>[    8.523851] hid-generic 0003:15CA:00C3.0002: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-3.4.2/input0
>[    9.247946] NET: Registered protocol family 38
>[   29.222656] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[   29.339855] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
>[   29.339963] systemd[1]: Detected architecture x86-64.
>[   29.340111] systemd[1]: Set hostname to <mwaterm1-x250>.
>[   29.402508] systemd[1]: Listening on udev Control Socket.
>[   29.402647] systemd[1]: Created slice System Slice.
>[   29.402723] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
>[   29.402748] systemd[1]: Listening on Syslog Socket.
>[   29.402766] systemd[1]: Listening on LVM2 poll daemon socket.
>[   29.402774] systemd[1]: Reached target Remote File Systems (Pre).
>[   29.402823] systemd[1]: Listening on Journal Audit Socket.
>[   29.402832] systemd[1]: Reached target Remote File Systems.
>[   29.402898] systemd[1]: Created slice system-getty.slice.
>[   29.402925] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[   29.402987] systemd[1]: Created slice system-systemd\x2dfsck.slice.
>[   29.403008] systemd[1]: Listening on LVM2 metadata daemon socket.
>[   29.403025] systemd[1]: Listening on Journal Socket (/dev/log).
>[   29.403047] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[   29.403183] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[   29.403200] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[   29.403213] systemd[1]: Listening on udev Kernel Socket.
>[   29.403235] systemd[1]: Listening on Journal Socket.
>[   29.414633] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[   29.415054] systemd[1]: Starting Uncomplicated firewall...
>[   29.415471] systemd[1]: Starting Braille Device Support...
>[   29.417198] systemd[1]: Starting Load Kernel Modules...
>[   29.417661] systemd[1]: Starting Create list of required static device nodes for the current kernel...
>[   29.418116] systemd[1]: Mounting Huge Pages File System...
>[   29.420717] systemd[1]: Mounting POSIX Message Queue File System...
>[   29.421181] systemd[1]: Mounting Debug File System...
>[   29.421245] systemd[1]: Listening on fsck to fsckd communication Socket.
>[   29.421679] systemd[1]: Starting Journal Service...
>[   29.421791] systemd[1]: Created slice User and Session Slice.
>[   29.421812] systemd[1]: Reached target Slices.
>[   29.423043] systemd[1]: Started Create list of required static device nodes for the current kernel.
>[   29.423730] systemd[1]: Starting Create Static Device Nodes in /dev...
>[   29.424101] systemd[1]: Started Uncomplicated firewall.
>[   29.431579] systemd[1]: Mounted Debug File System.
>[   29.431922] systemd[1]: Mounted Huge Pages File System.
>[   29.432343] systemd[1]: Mounted POSIX Message Queue File System.
>[   29.433523] lp: driver loaded but no devices found
>[   29.436886] systemd[1]: Started LVM2 metadata daemon.
>[   29.438654] ppdev: user-space parallel port driver
>[   29.441369] systemd[1]: Started Load Kernel Modules.
>[   29.441820] systemd[1]: Starting Apply Kernel Variables...
>[   29.442458] systemd[1]: Mounting FUSE Control File System...
>[   29.445074] systemd[1]: Mounted FUSE Control File System.
>[   29.447061] systemd[1]: Started Apply Kernel Variables.
>[   29.449500] systemd[1]: Started Create Static Device Nodes in /dev.
>[   29.449935] systemd[1]: Starting udev Kernel Device Manager...
>[   29.458824] systemd[1]: Started Braille Device Support.
>[   29.461128] systemd[1]: Started Journal Service.
>[   29.504869] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
>[   29.511425] systemd-journald[408]: Received request to flush runtime journal from PID 1
>[   29.594911] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=306/852
>[   29.594914] [drm:intel_panel_actually_set_backlight] set backlight PWM = 312
>[   29.601074] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[   29.635833] Intel(R) Wireless WiFi driver for Linux
>[   29.635836] Copyright(c) 2003- 2015 Intel Corporation
>[   29.636584] Non-volatile memory driver v1.3
>[   29.639344] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-21.ucode failed with error -2
>[   29.639362] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-20.ucode failed with error -2
>[   29.639484] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-19.ucode failed with error -2
>[   29.639604] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-18.ucode failed with error -2
>[   29.639725] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7265D-17.ucode failed with error -2
>[   29.642692] thinkpad_acpi: ThinkPad ACPI Extras v0.25
>[   29.642695] thinkpad_acpi: http://ibm-acpi.sf.net/
>[   29.642696] thinkpad_acpi: ThinkPad BIOS N10ET33W (1.12 ), EC unknown
>[   29.642697] thinkpad_acpi: Lenovo ThinkPad X250, model 20CM001QUK
>[   29.644684] thinkpad_acpi: radio switch found; radios are enabled
>[   29.644703] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
>[   29.644704] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
>[   29.645927] iwlwifi 0000:03:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm
>[   29.647645] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
>[   29.648757] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
>[   29.669284] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
>[   29.669933] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
>[   29.670231] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
>[   29.675461] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
>[   29.675799] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>[   29.676254] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>[   29.677281] usbcore: registered new interface driver cdc_acm
>[   29.677283] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
>[   29.677422] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device
>[   29.678444] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
>[   29.680032] cdc_wdm 2-4:1.8: cdc-wdm1: USB WDM device
>[   29.680062] usbcore: registered new interface driver cdc_wdm
>[   29.696047] media: Linux media interface: v0.10
>[   29.698506] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/0003:04F3:0301.0001/input/input10
>[   29.699769] usbcore: registered new interface driver cdc_ncm
>[   29.700091] hid-multitouch 0003:04F3:0301.0001: input,hiddev0,hidraw1: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-5/input0
>[   29.702862] Linux video capture interface: v2.00
>[   29.704524] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[   29.708684] Bluetooth: Core ver 2.21
>[   29.708696] NET: Registered protocol family 31
>[   29.708697] Bluetooth: HCI device and connection manager initialized
>[   29.708701] Bluetooth: HCI socket layer initialized
>[   29.708704] Bluetooth: L2CAP socket layer initialized
>[   29.708708] Bluetooth: SCO socket layer initialized
>[   29.720454] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0366)
>[   29.726626] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[   29.726630] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   29.726633] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
>[   29.726634] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
>[   29.726636] snd_hda_codec_realtek hdaudioC1D0:    inputs:
>[   29.726639] snd_hda_codec_realtek hdaudioC1D0:      Dock Mic=0x19
>[   29.726641] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1a
>[   29.726644] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
>[   29.727746] uvcvideo 2-8:1.0: Entity type for entity Extension 4 was not initialized!
>[   29.727751] uvcvideo 2-8:1.0: Entity type for entity Extension 3 was not initialized!
>[   29.727753] uvcvideo 2-8:1.0: Entity type for entity Processing 2 was not initialized!
>[   29.727755] uvcvideo 2-8:1.0: Entity type for entity Camera 1 was not initialized!
>[   29.727765] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
>[   29.727844] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
>[   29.727869] input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input15
>[   29.727909] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
>[   29.729331] usbcore: registered new interface driver btusb
>[   29.729970] cdc_mbim 2-4:1.6: cdc-wdm3: USB WDM device
>[   29.730039] usbcore: registered new interface driver uvcvideo
>[   29.730041] USB Video Class driver (1.1.1)
>[   29.730126] cdc_mbim 2-4:1.6 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, 92:ad:a4:ac:37:fc
>[   29.730144] usbcore: registered new interface driver cdc_mbim
>[   29.746732] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
>[   29.746816] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
>[   29.746870] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
>[   29.746880] Bluetooth: hci0: read Intel version: 370810011003110e00
>[   29.746998] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
>[   29.747420] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
>[   29.767307] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>[   29.783713] kvm: disabled by bios
>[   29.807708] intel_rapl: Found RAPL domain package
>[   29.807712] intel_rapl: Found RAPL domain core
>[   29.807714] intel_rapl: Found RAPL domain uncore
>[   29.807716] intel_rapl: Found RAPL domain dram
>[   29.959732] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
>[   29.966897] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
>[   29.969155] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
>[   29.973266] Adding 8265212k swap on /dev/mapper/cryptswap1.  Priority:-1 extents:1 across:8265212k SSFS
>[   30.055200] audit: type=1400 audit(1462437265.391:2): apparmor="STATUS" operation="profile_load" name="/usr/bin/ubuntu-core-launcher" pid=841 comm="apparmor_parser"
>[   30.057720] audit: type=1400 audit(1462437265.391:3): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=838 comm="apparmor_parser"
>[   30.057726] audit: type=1400 audit(1462437265.391:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=838 comm="apparmor_parser"
>[   30.057730] audit: type=1400 audit(1462437265.391:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=838 comm="apparmor_parser"
>[   30.057735] audit: type=1400 audit(1462437265.391:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=838 comm="apparmor_parser"
>[   30.058475] audit: type=1400 audit(1462437265.395:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=837 comm="apparmor_parser"
>[   30.058481] audit: type=1400 audit(1462437265.395:8): apparmor="STATUS" operation="profile_load" name="chromium" pid=837 comm="apparmor_parser"
>[   30.060390] audit: type=1400 audit(1462437265.395:9): apparmor="STATUS" operation="profile_load" name="webbrowser-app" pid=842 comm="apparmor_parser"
>[   30.060396] audit: type=1400 audit(1462437265.395:10): apparmor="STATUS" operation="profile_load" name="oxide_helper" pid=842 comm="apparmor_parser"
>[   30.061699] audit: type=1400 audit(1462437265.395:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=844 comm="apparmor_parser"
>[   30.196304] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   30.196308] Bluetooth: BNEP filters: protocol multicast
>[   30.196312] Bluetooth: BNEP socket layer initialized
>[   30.252450] cgroup: new mount options do not match the existing superblock, will be ignored
>[   30.562130] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   30.562644] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>[   30.563096] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>[   30.631320] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>[   30.631762] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
>[   30.659131] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   30.662163] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   30.966603] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   31.065156] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   36.089072] [drm:drm_fb_helper_hotplug_event] 
>[   36.089075] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1]
>[   36.089076] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1]
>[   36.089083] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[   36.089091] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[   36.089381] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[   36.089668] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[   36.090089] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   36.090091] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes :
>[   36.090093] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138460 1920 1968 2000 2106 1080 1083 1088 1095 0x48 0x9
>[   36.090094] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1]
>[   36.090094] [drm:intel_dp_detect] [CONNECTOR:45:DP-1]
>[   36.090097] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:45:DP-1] disconnected
>[   36.090098] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1]
>[   36.090099] [drm:intel_hdmi_detect] [CONNECTOR:49:HDMI-A-1]
>[   36.214406] [drm:intel_hdmi_detect] Live status not up!
>[   36.214406] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:49:HDMI-A-1] disconnected
>[   36.214408] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:DP-2]
>[   36.214409] [drm:intel_dp_detect] [CONNECTOR:52:DP-2]
>[   36.214410] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:52:DP-2] disconnected
>[   36.214410] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:56:HDMI-A-2]
>[   36.214411] [drm:intel_hdmi_detect] [CONNECTOR:56:HDMI-A-2]
>[   36.214569] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   36.214570] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   36.214723] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   36.214724] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   36.214725] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:56:HDMI-A-2] disconnected
>[   36.214726] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:DP-3]
>[   36.214727] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:59:DP-3] disconnected
>[   36.214728] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:DP-4]
>[   36.215998] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[   36.215999] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[   36.216003] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[   36.218494] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[   36.222771] [drm:intel_dp_check_mst_status] got esi2 01 00 00
>[   36.222772] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[   36.224449] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[   36.224451] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[   36.224454] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[   36.224888] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[   36.225640] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[   36.226074] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[   36.226927] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[   36.226934] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[   36.228232] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[   36.228671] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[   36.229538] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[   36.229975] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[   36.231304] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[   36.231739] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[   36.232490] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[   36.233778] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[   36.233785] [drm:intel_dp_check_mst_status] got esi2 01 00 00
>[   36.233786] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[   36.241224] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[   36.241225] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[   36.241230] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[   36.243710] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[   36.246761] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[   36.247628] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[   36.249037] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00400000, dig 0x10101110, pins 0x00000040
>[   36.249039] [drm:intel_hpd_irq_handler] digital hpd port C - short
>[   36.250589] [drm:intel_dp_check_mst_status] got esi2 01 10 00
>[   36.250590] [drm:intel_dp_check_mst_status] got esi 01 10 00
>[   36.253223] [drm:gen8_de_irq_handler] The master control interrupt lied (SDE)!
>[   36.254564] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   36.254575] [drm:drm_mode_debug_printmodeline] Modeline 66:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[   36.254576] [drm:drm_mode_prune_invalid] Not using 1920x1200 mode: VIRTUAL_Y
>[   36.254578] [drm:drm_mode_debug_printmodeline] Modeline 89:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[   36.254579] [drm:drm_mode_prune_invalid] Not using 1600x1200 mode: VIRTUAL_Y
>[   36.254581] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:62:DP-4] probed modes :
>[   36.254583] [drm:drm_mode_debug_printmodeline] Modeline 71:"1280x1024" 85 157500 1280 1344 1504 1728 1024 1025 1028 1072 0x40 0x5
>[   36.254584] [drm:drm_mode_debug_printmodeline] Modeline 77:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   36.254586] [drm:drm_mode_debug_printmodeline] Modeline 70:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   36.254587] [drm:drm_mode_debug_printmodeline] Modeline 69:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[   36.254589] [drm:drm_mode_debug_printmodeline] Modeline 83:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[   36.254591] [drm:drm_mode_debug_printmodeline] Modeline 68:"1024x768" 85 94500 1024 1072 1168 1376 768 769 772 808 0x40 0x5
>[   36.254592] [drm:drm_mode_debug_printmodeline] Modeline 78:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   36.254594] [drm:drm_mode_debug_printmodeline] Modeline 79:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[   36.254595] [drm:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   36.254597] [drm:drm_mode_debug_printmodeline] Modeline 81:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
>[   36.254598] [drm:drm_mode_debug_printmodeline] Modeline 82:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   36.254600] [drm:drm_mode_debug_printmodeline] Modeline 73:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   36.254601] [drm:drm_mode_debug_printmodeline] Modeline 74:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   36.254603] [drm:drm_mode_debug_printmodeline] Modeline 75:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[   36.254604] [drm:drm_mode_debug_printmodeline] Modeline 76:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   36.254606] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:DP-5]
>[   36.254608] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:DP-5] disconnected
>[   36.254612] [drm:drm_setup_crtcs] 
>[   36.254614] [drm:drm_enable_connectors] connector 37 enabled? yes
>[   36.254614] [drm:drm_enable_connectors] connector 45 enabled? no
>[   36.254615] [drm:drm_enable_connectors] connector 49 enabled? no
>[   36.254616] [drm:drm_enable_connectors] connector 52 enabled? no
>[   36.254616] [drm:drm_enable_connectors] connector 56 enabled? no
>[   36.254617] [drm:drm_enable_connectors] connector 59 enabled? no
>[   36.254618] [drm:drm_enable_connectors] connector 62 enabled? yes
>[   36.254618] [drm:drm_enable_connectors] connector 64 enabled? no
>[   36.254620] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[   36.254621] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[   36.254622] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080
>[   36.254623] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[   36.254624] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[   36.254624] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[   36.254625] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[   36.254625] [drm:intel_fb_initial_config] connector DP-3 not enabled, skipping
>[   36.254626] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-4
>[   36.254627] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-4 0
>[   36.254627] [drm:intel_fb_initial_config] using first mode listed on connector DP-4
>[   36.254628] [drm:intel_fb_initial_config] connector DP-4 on pipe B [CRTC:30]: 1280x1024
>[   36.254629] [drm:intel_fb_initial_config] connector DP-5 not enabled, skipping
>[   36.254630] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[   36.254632] [drm:drm_setup_crtcs] desired mode 1280x1024 set on crtc 30 (0,0)
>[   36.257493] [drm:intel_dp_check_mst_status] got esi2 01 00 00
>[   36.257495] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[   36.257499] [drm:intel_dp_hpd_pulse] got hpd irq on port C - short
>[   36.259994] [drm:intel_dp_check_mst_status] got esi 01 00 00
>[   39.090481] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[   39.090492] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[   58.609800] wlan0: authenticate with cc:33:bb:21:42:c7
>[   58.618068] wlan0: send auth to cc:33:bb:21:42:c7 (try 1/3)
>[   58.618722] wlan0: authenticated
>[   58.622396] wlan0: associate with cc:33:bb:21:42:c7 (try 1/3)
>[   58.623172] wlan0: RX AssocResp from cc:33:bb:21:42:c7 (capab=0x411 status=0 aid=29)
>[   58.624776] wlan0: associated
>[   58.624802] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

Actions: View

Attachments on bug 95269: 123488

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.