Attachment 123734 Details for Bug 93297 – Dmesg log

Dmesg log

bug_93297_10it (text/plain), 251.20 KB, created by Elio on 2016-05-13 20:45:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Elio

Created: 2016-05-13 20:45:05 UTC

Size: 251.20 KB

patch

obsolete

>[  293.279594] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  293.279604] [drm:intel_dump_pipe_config] adjusted mode:
>[  293.279621] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  293.279637] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  293.279647] [drm:intel_dump_pipe_config] port clock: 270000
>[  293.279657] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  293.279668] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  293.279680] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  293.279691] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  293.279701] [drm:intel_dump_pipe_config] ips: 0
>[  293.279710] [drm:intel_dump_pipe_config] double wide: 0
>[  293.279722] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  293.279732] [drm:intel_dump_pipe_config] planes on this crtc
>[  293.279744] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  293.279758] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  293.279771] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  293.279784] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  293.279805] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  293.293666] [drm:intel_runtime_resume] Resuming device
>[  293.296388] [drm:intel_runtime_resume] Device resumed
>[  293.296604] [drm:intel_power_well_enable] enabling always-on
>[  293.296623] [drm:intel_power_well_enable] enabling display
>[  293.306440] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  293.306774] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  293.314239] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  293.324027] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  293.330855] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  293.340677] [drm:intel_power_well_enable] enabling dpio-common
>[  293.365160] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  293.365253] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  293.365275] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  293.365287] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  293.365301] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  293.365316] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  293.365331] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  293.365344] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  293.414334] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  293.414364] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  293.414384] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  293.414396] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  293.609825] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  293.814019] [drm:wait_panel_status] Wait complete
>[  293.814048] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  293.814061] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  294.018307] [drm:edp_panel_on] Turn eDP port B panel power on
>[  294.018330] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  294.018348] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  294.018359] [drm:wait_panel_status] Wait complete
>[  294.018370] [drm:wait_panel_on] Wait for panel power on
>[  294.018384] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  294.182139] [drm:wait_panel_status] Wait complete
>[  294.182164] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  294.182182] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  294.182209] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  294.182225] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  294.200813] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  294.200832] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  294.202531] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  294.204387] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  294.204985] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  294.205012] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  294.205023] [drm:intel_enable_pipe] enabling pipe A
>[  294.205050] [drm:intel_edp_backlight_on] 
>[  294.205062] [drm:intel_panel_enable_backlight] pipe A
>[  294.205074] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  294.205095] [drm:intel_psr_enable] PSR not supported by this panel
>[  294.222230] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  294.222261] [drm:verify_crtc_state] [CRTC:26]
>[  294.225694] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  294.225742] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  294.238916] [drm:intel_edp_backlight_off] 
>[  294.442547] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  294.443053] [drm:edp_panel_off] Turn eDP port B panel power off
>[  294.443071] [drm:wait_panel_off] Wait for panel power off time
>[  294.443088] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  294.483971] [drm:wait_panel_status] Wait complete
>[  294.484014] [drm:intel_disable_pipe] disabling pipe A
>[  294.488942] [drm:intel_dp_link_down] 
>[  294.542829] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  294.542861] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  294.556631] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  294.556658] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  294.556680] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  294.556695] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  294.556709] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  294.556723] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  294.556737] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  294.556751] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  294.556764] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  294.556790] [drm:intel_power_well_disable] disabling dpio-common
>[  294.566144] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  294.575818] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  294.585535] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  294.591809] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  294.601528] [drm:intel_power_well_disable] disabling display
>[  294.607834] [drm:verify_crtc_state] [CRTC:26]
>[  294.607864] [drm:intel_power_well_disable] disabling always-on
>[  294.612665] pm_rpm: exiting, ret=0
>[  294.613066] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  294.613073] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  294.613086] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  294.613096] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  294.613101] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  294.613109] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  294.613119] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880178d34800 for pipe A
>[  294.613124] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  294.613128] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  294.613136] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  294.613145] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  294.613152] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  294.613157] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  294.613160] [drm:intel_dump_pipe_config] requested mode:
>[  294.613174] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  294.613177] [drm:intel_dump_pipe_config] adjusted mode:
>[  294.613189] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  294.613199] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  294.613203] [drm:intel_dump_pipe_config] port clock: 270000
>[  294.613208] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  294.613213] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  294.613219] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  294.613225] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  294.613228] [drm:intel_dump_pipe_config] ips: 0
>[  294.613232] [drm:intel_dump_pipe_config] double wide: 0
>[  294.613239] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  294.613242] [drm:intel_dump_pipe_config] planes on this crtc
>[  294.613250] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  294.613257] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  294.613264] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  294.613271] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  294.613281] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  294.613318] [drm:intel_power_well_enable] enabling always-on
>[  294.613326] [drm:intel_power_well_enable] enabling display
>[  294.618551] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  294.618869] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  294.627877] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  294.637670] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  294.647462] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  294.653791] [drm:intel_power_well_enable] enabling dpio-common
>[  294.675787] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  294.675801] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  294.675815] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  294.675820] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  294.675829] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  294.675838] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  294.675847] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  294.675854] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  294.724847] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  294.724863] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  294.724876] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  294.724881] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  295.047309] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  295.129137] [drm:wait_panel_status] Wait complete
>[  295.129153] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  295.129159] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  295.163735] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  295.166176] [drm:valleyview_enable_rps] GPLL enabled? yes
>[  295.166185] [drm:valleyview_enable_rps] GPU status: 0x0000c090
>[  295.166192] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192)
>[  295.166197] [drm:valleyview_enable_rps] setting GPU freq to 200 MHz (192)
>[  295.331496] [drm:edp_panel_on] Turn eDP port B panel power on
>[  295.331504] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  295.331517] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  295.331522] [drm:wait_panel_status] Wait complete
>[  295.331528] [drm:wait_panel_on] Wait for panel power on
>[  295.331537] [drm:wait_panel_status] mask b000000f value 80000008 status 9000000a control abcd000b
>[  295.495227] [drm:wait_panel_status] Wait complete
>[  295.495237] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  295.495250] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  295.495271] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  295.495281] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  295.513691] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  295.513697] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  295.515294] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  295.517159] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  295.517754] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  295.517771] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  295.517777] [drm:intel_enable_pipe] enabling pipe A
>[  295.517798] [drm:intel_edp_backlight_on] 
>[  295.517804] [drm:intel_panel_enable_backlight] pipe A
>[  295.517810] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  295.517825] [drm:intel_psr_enable] PSR not supported by this panel
>[  295.534658] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  295.534673] [drm:verify_crtc_state] [CRTC:26]
>[  296.679255] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  296.679299] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  296.679347] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  296.679390] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  296.679430] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  296.679470] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  298.526816] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  298.526845] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  305.803839] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  305.803886] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  305.803934] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  305.803976] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  305.804017] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  305.804059] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  314.925087] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  314.925123] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  314.925161] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  314.925196] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  314.925229] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  314.925264] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  324.049921] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  324.049967] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  324.050014] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  324.050056] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  324.050096] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  324.050137] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  333.171690] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  333.171734] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  333.171782] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  333.171824] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  333.171863] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  333.171904] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  342.292118] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  342.292163] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  342.292211] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  342.292252] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  342.292292] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  342.292333] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  351.413904] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  351.413950] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  351.413997] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  351.414039] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  351.414079] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  351.414120] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  360.534498] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  360.534545] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  360.534593] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  360.534635] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  360.534676] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  360.534717] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  369.659657] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  369.659702] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  369.659749] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  369.659791] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  369.659831] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  369.659872] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  378.780621] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  378.780666] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  378.780713] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  378.780754] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  378.780794] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  378.780835] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  387.901723] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  387.901769] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  387.901816] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  387.901858] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  387.901898] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  387.901940] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  397.023641] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  397.023687] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  397.023734] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  397.023777] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  397.023816] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  397.023857] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  406.144185] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  406.144210] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  406.144234] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  406.144255] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  406.144275] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  406.144296] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  415.268263] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  415.268271] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  415.268279] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  415.268286] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  415.268293] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  415.268299] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  424.394246] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  424.394291] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  424.394338] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  424.394380] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  424.394419] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  424.394460] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  433.515549] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  433.515594] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  433.515642] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  433.515684] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  433.515724] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  433.515765] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  442.636847] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  442.636893] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  442.636940] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  442.636983] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  442.637023] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  442.637065] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  451.757595] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  451.757640] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  451.757688] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  451.757730] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  451.757769] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  451.757812] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  460.878753] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  460.878799] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  460.878847] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  460.878889] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  460.878930] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  460.878971] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  470.000291] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  470.000339] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  470.000387] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  470.000429] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  470.000469] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  470.000511] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  479.121021] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  479.121068] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  479.121116] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  479.121158] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  479.121199] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  479.121241] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  488.242939] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  488.242984] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  488.243032] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  488.243075] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  488.243115] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  488.243157] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  497.363240] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  497.363285] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  497.363333] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  497.363376] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  497.363417] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  497.363459] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  506.485159] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  506.485206] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  506.485253] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  506.485296] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  506.485337] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  506.485379] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  515.609434] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  515.609479] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  515.609527] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  515.609570] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  515.609611] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  515.609653] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  524.730736] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  524.730781] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  524.730829] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  524.730871] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  524.730912] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  524.730953] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  533.851686] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  533.851732] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  533.851781] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  533.851822] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  533.851863] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  533.851905] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  542.973519] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  542.973565] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  542.973613] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  542.973655] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  542.973696] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  542.973738] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  552.094450] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  552.094496] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  552.094543] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  552.094585] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  552.094626] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  552.094668] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  561.215263] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  561.215308] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  561.215356] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  561.215398] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  561.215438] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  561.215479] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  570.336378] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  570.336424] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  570.336472] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  570.336514] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  570.336554] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  570.336596] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  579.462163] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  579.462211] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  579.462259] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  579.462302] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  579.462342] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  579.462383] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  588.582454] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  588.582502] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  588.582550] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  588.582593] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  588.582633] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  588.582674] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  597.699556] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  597.699602] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  597.699651] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  597.699693] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  597.699732] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  597.699773] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  606.821183] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  606.821229] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  606.821277] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  606.821320] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  606.821360] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  606.821402] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  615.942703] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  615.942749] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  615.942796] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  615.942839] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  615.942879] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  615.942920] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  625.066880] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  625.066926] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  625.066975] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  625.067017] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  625.067056] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  625.067097] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  634.184870] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  634.184915] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  634.184964] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  634.185006] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  634.185046] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  634.185087] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  643.305412] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  643.305457] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  643.305505] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  643.305549] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  643.305589] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  643.305630] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  652.426565] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  652.426610] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  652.426658] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  652.426700] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  652.426740] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  652.426780] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  661.551456] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  661.551502] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  661.551550] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  661.551593] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  661.551633] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  661.551674] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  670.672807] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  670.672852] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  670.672900] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  670.672942] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  670.672982] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  670.673024] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  679.793587] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  679.793634] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  679.793682] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  679.793724] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  679.793764] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  679.793805] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  688.915595] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  688.915642] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  688.915691] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  688.915734] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  688.915774] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  688.915816] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  698.036528] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  698.036576] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  698.036624] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  698.036667] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  698.036708] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  698.036749] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  707.156978] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  707.157024] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  707.157072] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  707.157115] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  707.157155] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  707.157197] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  716.278311] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  716.278357] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  716.278404] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  716.278447] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  716.278487] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  716.278528] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  725.399641] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  725.399687] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  725.399735] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  725.399778] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  725.399819] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  725.399860] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  734.521175] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  734.521220] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  734.521268] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  734.521311] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  734.521351] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  734.521392] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  743.646514] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  743.646559] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  743.646608] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  743.646651] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  743.646692] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  743.646733] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  752.766463] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  752.766494] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  752.766527] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  752.766557] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  752.766586] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  752.766614] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  753.213175] pm_rpm: executing
>[  753.213385] [drm:i915_gem_open] 
>[  753.216667] [drm:i915_gem_open] 
>[  753.217291] [drm:drm_mode_addfb2] [FB:50]
>[  754.258561] pm_rpm: starting subtest basic-rte
>[  754.258709] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  754.258779] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  754.258822] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  754.261945] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  754.261973] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  754.261986] [drm:intel_edp_backlight_off] 
>[  754.462573] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  754.463083] [drm:edp_panel_off] Turn eDP port B panel power off
>[  754.463101] [drm:wait_panel_off] Wait for panel power off time
>[  754.463117] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  754.504038] [drm:wait_panel_status] Wait complete
>[  754.504082] [drm:intel_disable_pipe] disabling pipe A
>[  754.513936] [drm:intel_dp_link_down] 
>[  754.566457] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  754.566489] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  754.580675] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  754.580702] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  754.580723] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  754.580738] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  754.580752] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  754.580766] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  754.580780] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  754.580794] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  754.580807] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  754.580832] [drm:intel_power_well_disable] disabling dpio-common
>[  754.590508] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  754.600084] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  754.607688] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  754.614988] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  754.624142] [drm:intel_power_well_disable] disabling display
>[  754.634116] [drm:verify_crtc_state] [CRTC:26]
>[  754.634146] [drm:intel_power_well_disable] disabling always-on
>[  754.634234] [drm:drm_mode_setcrtc] [CRTC:31:crtc-1]
>[  754.634511] [drm:intel_runtime_suspend] Suspending device
>[  754.637061] [drm:intel_runtime_suspend] Device suspended
>[  754.735049] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  754.735084] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1]
>[  754.735157] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  754.735170] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  754.735189] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  754.735205] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  754.735216] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  754.735230] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  754.735246] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88007264b000 for pipe A
>[  754.735256] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  754.735266] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  754.735280] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  754.735295] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  754.735308] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  754.735319] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  754.735328] [drm:intel_dump_pipe_config] requested mode:
>[  754.735346] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  754.735356] [drm:intel_dump_pipe_config] adjusted mode:
>[  754.735373] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  754.735389] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  754.735399] [drm:intel_dump_pipe_config] port clock: 270000
>[  754.735409] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  754.735420] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  754.735432] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  754.735443] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  754.735453] [drm:intel_dump_pipe_config] ips: 0
>[  754.735462] [drm:intel_dump_pipe_config] double wide: 0
>[  754.735474] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  754.735484] [drm:intel_dump_pipe_config] planes on this crtc
>[  754.735496] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  754.735510] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  754.735523] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  754.735536] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  754.735558] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  754.750951] [drm:intel_runtime_resume] Resuming device
>[  754.753611] [drm:intel_runtime_resume] Device resumed
>[  754.753827] [drm:intel_power_well_enable] enabling always-on
>[  754.753845] [drm:intel_power_well_enable] enabling display
>[  754.763504] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  754.763839] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  754.773630] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  754.782393] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  754.789760] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  754.795871] [drm:intel_power_well_enable] enabling dpio-common
>[  754.817966] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  754.817993] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  754.818014] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  754.818025] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  754.818040] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  754.818055] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  754.818069] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  754.818083] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  754.866712] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  754.866742] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  754.866763] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  754.866774] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  755.071227] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  755.274123] [drm:wait_panel_status] Wait complete
>[  755.274152] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  755.274164] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  755.475718] [drm:edp_panel_on] Turn eDP port B panel power on
>[  755.475741] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  755.475760] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  755.475771] [drm:wait_panel_status] Wait complete
>[  755.475782] [drm:wait_panel_on] Wait for panel power on
>[  755.475796] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  755.639461] [drm:wait_panel_status] Wait complete
>[  755.639487] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  755.639505] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  755.639532] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  755.639549] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  755.658145] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  755.658165] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  755.659937] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  755.661795] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  755.662395] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  755.662421] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  755.662433] [drm:intel_enable_pipe] enabling pipe A
>[  755.662460] [drm:intel_edp_backlight_on] 
>[  755.662471] [drm:intel_panel_enable_backlight] pipe A
>[  755.662484] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  755.662504] [drm:intel_psr_enable] PSR not supported by this panel
>[  755.679699] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  755.679731] [drm:verify_crtc_state] [CRTC:26]
>[  755.683197] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  755.683245] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  755.696024] [drm:intel_edp_backlight_off] 
>[  755.900176] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  755.900684] [drm:edp_panel_off] Turn eDP port B panel power off
>[  755.900702] [drm:wait_panel_off] Wait for panel power off time
>[  755.900718] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  755.941603] [drm:wait_panel_status] Wait complete
>[  755.941648] [drm:intel_disable_pipe] disabling pipe A
>[  755.946587] [drm:intel_dp_link_down] 
>[  756.000124] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  756.000156] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  756.013847] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  756.013875] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  756.013896] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  756.013911] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  756.013925] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  756.013939] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  756.013953] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  756.013967] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  756.013981] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  756.014007] [drm:intel_power_well_disable] disabling dpio-common
>[  756.023625] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  756.033124] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  756.042437] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  756.048520] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  756.054727] [drm:intel_power_well_disable] disabling display
>[  756.060977] [drm:verify_crtc_state] [CRTC:26]
>[  756.061007] [drm:intel_power_well_disable] disabling always-on
>[  756.065824] pm_rpm: exiting, ret=0
>[  756.066226] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  756.066232] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  756.066246] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  756.066256] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  756.066260] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  756.066269] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  756.066279] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880178d34800 for pipe A
>[  756.066283] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  756.066288] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  756.066296] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  756.066305] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  756.066312] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  756.066447] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  756.066450] [drm:intel_dump_pipe_config] requested mode:
>[  756.066465] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  756.066468] [drm:intel_dump_pipe_config] adjusted mode:
>[  756.066480] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  756.066490] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  756.066495] [drm:intel_dump_pipe_config] port clock: 270000
>[  756.066499] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  756.066505] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  756.066511] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  756.066516] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  756.066520] [drm:intel_dump_pipe_config] ips: 0
>[  756.066524] [drm:intel_dump_pipe_config] double wide: 0
>[  756.066531] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  756.066534] [drm:intel_dump_pipe_config] planes on this crtc
>[  756.066541] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  756.066548] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  756.066555] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  756.066562] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  756.066575] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  756.066613] [drm:intel_power_well_enable] enabling always-on
>[  756.066622] [drm:intel_power_well_enable] enabling display
>[  756.071507] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  756.071877] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  756.081476] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  756.090550] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  756.100349] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  756.110143] [drm:intel_power_well_enable] enabling dpio-common
>[  756.134611] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  756.134625] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  756.134639] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  756.134644] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  756.134653] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  756.134663] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  756.134671] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  756.134679] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  756.181767] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  756.181783] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  756.181795] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  756.181801] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  756.504509] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  756.586478] [drm:wait_panel_status] Wait complete
>[  756.586494] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  756.586500] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  756.637148] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  756.639590] [drm:valleyview_enable_rps] GPLL enabled? yes
>[  756.639598] [drm:valleyview_enable_rps] GPU status: 0x0000c090
>[  756.639606] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192)
>[  756.639611] [drm:valleyview_enable_rps] setting GPU freq to 200 MHz (192)
>[  756.789007] [drm:edp_panel_on] Turn eDP port B panel power on
>[  756.789015] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  756.789028] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  756.789033] [drm:wait_panel_status] Wait complete
>[  756.789039] [drm:wait_panel_on] Wait for panel power on
>[  756.789047] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  756.952684] [drm:wait_panel_status] Wait complete
>[  756.952694] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  756.952787] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  756.952809] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  756.952820] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  756.971406] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  756.971412] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  756.973018] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  756.974879] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  756.975473] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  756.975490] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  756.975495] [drm:intel_enable_pipe] enabling pipe A
>[  756.975517] [drm:intel_edp_backlight_on] 
>[  756.975523] [drm:intel_panel_enable_backlight] pipe A
>[  756.975530] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  756.975544] [drm:intel_psr_enable] PSR not supported by this panel
>[  756.992389] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  756.992404] [drm:verify_crtc_state] [CRTC:26]
>[  759.979939] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  759.979967] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  761.210884] pm_rpm: executing
>[  761.211083] [drm:i915_gem_open] 
>[  761.214504] [drm:i915_gem_open] 
>[  761.214827] [drm:drm_mode_addfb2] [FB:50]
>[  761.888535] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  761.888582] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  761.888629] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  761.888673] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  761.888713] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  761.888756] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  762.255250] pm_rpm: starting subtest basic-rte
>[  762.255402] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  762.255472] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  762.255517] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  762.264813] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  762.264842] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  762.264856] [drm:intel_edp_backlight_off] 
>[  762.466776] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  762.467301] [drm:edp_panel_off] Turn eDP port B panel power off
>[  762.467321] [drm:wait_panel_off] Wait for panel power off time
>[  762.467338] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  762.508157] [drm:wait_panel_status] Wait complete
>[  762.508201] [drm:intel_disable_pipe] disabling pipe A
>[  762.515989] [drm:intel_dp_link_down] 
>[  762.570801] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  762.570832] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  762.585016] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  762.585043] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  762.585064] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  762.585079] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  762.585093] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  762.585106] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  762.585120] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  762.585134] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  762.585148] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  762.585173] [drm:intel_power_well_disable] disabling dpio-common
>[  762.594540] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  762.604045] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  762.611483] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  762.621467] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  762.628095] [drm:intel_power_well_disable] disabling display
>[  762.638054] [drm:verify_crtc_state] [CRTC:26]
>[  762.638084] [drm:intel_power_well_disable] disabling always-on
>[  762.638173] [drm:drm_mode_setcrtc] [CRTC:31:crtc-1]
>[  762.638344] [drm:intel_runtime_suspend] Suspending device
>[  762.641040] [drm:intel_runtime_suspend] Device suspended
>[  762.738625] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  762.738659] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1]
>[  762.738728] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  762.738742] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  762.738761] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  762.738776] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  762.738787] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  762.738802] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  762.738818] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88007264c000 for pipe A
>[  762.738828] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  762.738838] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  762.738851] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  762.738866] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  762.738880] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  762.738890] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  762.738899] [drm:intel_dump_pipe_config] requested mode:
>[  762.738917] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  762.738927] [drm:intel_dump_pipe_config] adjusted mode:
>[  762.738944] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  762.738960] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  762.738970] [drm:intel_dump_pipe_config] port clock: 270000
>[  762.738980] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  762.738991] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  762.739003] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  762.739014] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  762.739024] [drm:intel_dump_pipe_config] ips: 0
>[  762.739033] [drm:intel_dump_pipe_config] double wide: 0
>[  762.739045] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  762.739054] [drm:intel_dump_pipe_config] planes on this crtc
>[  762.739067] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  762.739080] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  762.739093] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  762.739106] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  762.739128] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  762.755079] [drm:intel_runtime_resume] Resuming device
>[  762.757736] [drm:intel_runtime_resume] Device resumed
>[  762.757954] [drm:intel_power_well_enable] enabling always-on
>[  762.757972] [drm:intel_power_well_enable] enabling display
>[  762.767811] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  762.768145] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  762.775193] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  762.783478] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  762.793275] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  762.802671] [drm:intel_power_well_enable] enabling dpio-common
>[  762.826465] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  762.826491] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  762.826511] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  762.826523] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  762.826537] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  762.826552] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  762.826567] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  762.826680] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  762.874610] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  762.874711] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  762.874735] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  762.874747] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  763.075291] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  763.278775] [drm:wait_panel_status] Wait complete
>[  763.278804] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  763.278817] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  763.479443] [drm:edp_panel_on] Turn eDP port B panel power on
>[  763.479467] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  763.479485] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  763.479496] [drm:wait_panel_status] Wait complete
>[  763.479507] [drm:wait_panel_on] Wait for panel power on
>[  763.479521] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  763.639718] [drm:wait_panel_status] Wait complete
>[  763.639743] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  763.639761] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  763.639788] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  763.639805] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  763.658408] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  763.658428] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  763.660442] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  763.662300] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  763.662898] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  763.662924] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  763.662937] [drm:intel_enable_pipe] enabling pipe A
>[  763.662964] [drm:intel_edp_backlight_on] 
>[  763.662976] [drm:intel_panel_enable_backlight] pipe A
>[  763.662988] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  763.663009] [drm:intel_psr_enable] PSR not supported by this panel
>[  763.680140] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  763.680172] [drm:verify_crtc_state] [CRTC:26]
>[  763.684145] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  763.684192] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  763.696818] [drm:intel_edp_backlight_off] 
>[  763.900138] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  763.900646] [drm:edp_panel_off] Turn eDP port B panel power off
>[  763.900664] [drm:wait_panel_off] Wait for panel power off time
>[  763.900680] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  763.941437] [drm:wait_panel_status] Wait complete
>[  763.941481] [drm:intel_disable_pipe] disabling pipe A
>[  763.948822] [drm:intel_dp_link_down] 
>[  764.004260] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  764.004292] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  764.017818] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  764.017846] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  764.017866] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  764.017881] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  764.017895] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  764.017909] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  764.017923] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  764.017937] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  764.017950] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  764.017976] [drm:intel_power_well_disable] disabling dpio-common
>[  764.025195] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  764.031020] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  764.040562] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  764.049140] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  764.058491] [drm:intel_power_well_disable] disabling display
>[  764.065168] [drm:verify_crtc_state] [CRTC:26]
>[  764.065199] [drm:intel_power_well_disable] disabling always-on
>[  764.070117] pm_rpm: exiting, ret=0
>[  764.070521] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  764.070528] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  764.070542] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  764.070552] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  764.070557] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  764.070565] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  764.070575] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880178d37000 for pipe A
>[  764.070579] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  764.070584] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  764.070592] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  764.070601] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  764.070608] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  764.070613] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  764.070616] [drm:intel_dump_pipe_config] requested mode:
>[  764.070629] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  764.070633] [drm:intel_dump_pipe_config] adjusted mode:
>[  764.070644] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  764.070654] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  764.070659] [drm:intel_dump_pipe_config] port clock: 270000
>[  764.070663] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  764.070669] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  764.070675] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  764.070680] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  764.070684] [drm:intel_dump_pipe_config] ips: 0
>[  764.070688] [drm:intel_dump_pipe_config] double wide: 0
>[  764.070695] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  764.070698] [drm:intel_dump_pipe_config] planes on this crtc
>[  764.070705] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  764.070712] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  764.070719] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  764.070726] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  764.070737] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  764.070773] [drm:intel_power_well_enable] enabling always-on
>[  764.070782] [drm:intel_power_well_enable] enabling display
>[  764.078343] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  764.078662] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  764.085398] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  764.092832] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  764.102396] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  764.111832] [drm:intel_power_well_enable] enabling dpio-common
>[  764.138857] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  764.138871] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  764.138885] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  764.138890] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  764.138899] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  764.138908] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  764.138917] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  764.138925] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  764.187118] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  764.187135] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  764.187147] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  764.187153] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  764.504801] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  764.586262] [drm:wait_panel_status] Wait complete
>[  764.586277] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  764.586283] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  764.645207] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  764.647648] [drm:valleyview_enable_rps] GPLL enabled? yes
>[  764.647657] [drm:valleyview_enable_rps] GPU status: 0x0000c090
>[  764.647664] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192)
>[  764.647669] [drm:valleyview_enable_rps] setting GPU freq to 200 MHz (192)
>[  764.788861] [drm:edp_panel_on] Turn eDP port B panel power on
>[  764.788870] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  764.788883] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  764.788888] [drm:wait_panel_status] Wait complete
>[  764.788894] [drm:wait_panel_on] Wait for panel power on
>[  764.788903] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  764.951616] [drm:wait_panel_status] Wait complete
>[  764.951627] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  764.951640] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  764.951661] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  764.951671] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  764.970226] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  764.970232] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  764.971834] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  764.973782] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  764.974379] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  764.974396] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  764.974401] [drm:intel_enable_pipe] enabling pipe A
>[  764.974423] [drm:intel_edp_backlight_on] 
>[  764.974428] [drm:intel_panel_enable_backlight] pipe A
>[  764.974435] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  764.974450] [drm:intel_psr_enable] PSR not supported by this panel
>[  764.991615] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  764.991633] [drm:verify_crtc_state] [CRTC:26]
>[  767.980397] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  767.980425] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  769.037620] pm_rpm: executing
>[  769.037767] [drm:i915_gem_open] 
>[  769.041131] [drm:i915_gem_open] 
>[  769.041366] [drm:drm_mode_addfb2] [FB:50]
>[  770.077784] pm_rpm: starting subtest basic-rte
>[  770.078032] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  770.078103] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  770.078148] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  770.080230] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  770.080259] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  770.080273] [drm:intel_edp_backlight_off] 
>[  770.282498] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  770.283013] [drm:edp_panel_off] Turn eDP port B panel power off
>[  770.283031] [drm:wait_panel_off] Wait for panel power off time
>[  770.283047] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  770.323969] [drm:wait_panel_status] Wait complete
>[  770.324013] [drm:intel_disable_pipe] disabling pipe A
>[  770.331469] [drm:intel_dp_link_down] 
>[  770.386656] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  770.386688] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  770.400802] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  770.400830] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  770.400851] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  770.400866] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  770.400880] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  770.400894] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  770.400908] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  770.400922] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  770.400936] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  770.400961] [drm:intel_power_well_disable] disabling dpio-common
>[  770.410526] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  770.417529] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  770.427328] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  770.436708] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  770.445525] [drm:intel_power_well_disable] disabling display
>[  770.454944] [drm:verify_crtc_state] [CRTC:26]
>[  770.454975] [drm:intel_power_well_disable] disabling always-on
>[  770.455028] [drm:intel_runtime_suspend] Suspending device
>[  770.455156] [drm:drm_mode_setcrtc] [CRTC:31:crtc-1]
>[  770.457571] [drm:intel_runtime_suspend] Device suspended
>[  770.555639] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  770.555673] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1]
>[  770.555741] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  770.555755] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  770.555774] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  770.555790] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  770.555801] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  770.555815] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  770.555831] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880178d31800 for pipe A
>[  770.555842] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  770.555852] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  770.555865] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  770.555880] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  770.555894] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  770.555904] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  770.555913] [drm:intel_dump_pipe_config] requested mode:
>[  770.555931] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  770.555941] [drm:intel_dump_pipe_config] adjusted mode:
>[  770.555958] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  770.555974] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  770.555984] [drm:intel_dump_pipe_config] port clock: 270000
>[  770.555994] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  770.556005] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  770.556017] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  770.556028] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  770.556038] [drm:intel_dump_pipe_config] ips: 0
>[  770.556047] [drm:intel_dump_pipe_config] double wide: 0
>[  770.556059] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  770.556068] [drm:intel_dump_pipe_config] planes on this crtc
>[  770.556081] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  770.556094] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  770.556107] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  770.556120] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  770.556142] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  770.570888] [drm:intel_runtime_resume] Resuming device
>[  770.573543] [drm:intel_runtime_resume] Device resumed
>[  770.573762] [drm:intel_power_well_enable] enabling always-on
>[  770.573781] [drm:intel_power_well_enable] enabling display
>[  770.583122] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  770.583456] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  770.593246] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  770.600066] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  770.609924] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  770.619140] [drm:intel_power_well_enable] enabling dpio-common
>[  770.641080] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  770.641108] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  770.641129] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  770.641140] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  770.641155] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  770.641170] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  770.641184] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  770.641198] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  770.689135] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  770.689165] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  770.689186] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  770.689197] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  770.887132] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  771.009063] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  771.009109] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  771.009158] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  771.009201] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  771.009241] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  771.009283] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  771.081329] [drm:wait_panel_status] Wait complete
>[  771.081358] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  771.081371] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  771.283522] [drm:edp_panel_on] Turn eDP port B panel power on
>[  771.283546] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  771.283565] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  771.283575] [drm:wait_panel_status] Wait complete
>[  771.283587] [drm:wait_panel_on] Wait for panel power on
>[  771.283600] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  771.447277] [drm:wait_panel_status] Wait complete
>[  771.447302] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  771.447321] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  771.447348] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  771.447365] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  771.464186] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  771.464206] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  771.465833] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  771.467818] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  771.468423] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  771.468449] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  771.468461] [drm:intel_enable_pipe] enabling pipe A
>[  771.468489] [drm:intel_edp_backlight_on] 
>[  771.468500] [drm:intel_panel_enable_backlight] pipe A
>[  771.468512] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  771.468532] [drm:intel_psr_enable] PSR not supported by this panel
>[  771.485690] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  771.485721] [drm:verify_crtc_state] [CRTC:26]
>[  771.489093] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  771.489139] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  771.502344] [drm:intel_edp_backlight_off] 
>[  771.640308] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  771.644925] [drm:valleyview_enable_rps] GPLL enabled? yes
>[  771.644945] [drm:valleyview_enable_rps] GPU status: 0x0000c090
>[  771.644958] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192)
>[  771.644969] [drm:valleyview_enable_rps] setting GPU freq to 200 MHz (192)
>[  771.703895] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  771.704402] [drm:edp_panel_off] Turn eDP port B panel power off
>[  771.704419] [drm:wait_panel_off] Wait for panel power off time
>[  771.704436] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  771.745411] [drm:wait_panel_status] Wait complete
>[  771.745455] [drm:intel_disable_pipe] disabling pipe A
>[  771.752544] [drm:intel_dp_link_down] 
>[  771.808039] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  771.808071] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  771.822198] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  771.822225] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  771.822246] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  771.822261] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  771.822275] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  771.822289] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  771.822303] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  771.822317] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  771.822330] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  771.822355] [drm:intel_power_well_disable] disabling dpio-common
>[  771.832011] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  771.841237] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  771.851084] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  771.860397] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  771.868873] [drm:intel_power_well_disable] disabling display
>[  771.878433] [drm:verify_crtc_state] [CRTC:26]
>[  771.878463] [drm:intel_power_well_disable] disabling always-on
>[  771.878546] [drm:intel_runtime_suspend] Suspending device
>[  771.880190] [drm:intel_runtime_suspend] Device suspended
>[  771.911853] [drm:intel_runtime_resume] Resuming device
>[  771.914483] [drm:intel_runtime_resume] Device resumed
>[  771.919046] pm_rpm: exiting, ret=0
>[  771.919455] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  771.919461] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  771.919475] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  771.919484] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  771.919489] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  771.919497] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  771.919507] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880178d32000 for pipe A
>[  771.919512] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  771.919517] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  771.919524] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  771.919533] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  771.919541] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  771.919545] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  771.919549] [drm:intel_dump_pipe_config] requested mode:
>[  771.919562] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  771.919565] [drm:intel_dump_pipe_config] adjusted mode:
>[  771.919577] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  771.919587] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  771.919592] [drm:intel_dump_pipe_config] port clock: 270000
>[  771.919596] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  771.919602] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  771.919608] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  771.919613] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  771.919617] [drm:intel_dump_pipe_config] ips: 0
>[  771.919620] [drm:intel_dump_pipe_config] double wide: 0
>[  771.919627] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  771.919631] [drm:intel_dump_pipe_config] planes on this crtc
>[  771.919638] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  771.919645] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  771.919652] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  771.919658] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  771.919747] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  771.919787] [drm:intel_power_well_enable] enabling always-on
>[  771.919796] [drm:intel_power_well_enable] enabling display
>[  771.926217] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  771.926536] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  771.935475] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  771.945194] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  771.953803] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  771.963354] [drm:intel_power_well_enable] enabling dpio-common
>[  771.990070] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  771.990084] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  771.990098] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  771.990103] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  771.990112] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  771.990121] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  771.990130] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  771.990138] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  772.038243] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  772.038259] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  772.038272] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  772.038277] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  772.308532] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  772.429108] [drm:wait_panel_status] Wait complete
>[  772.429124] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  772.429130] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  772.632864] [drm:edp_panel_on] Turn eDP port B panel power on
>[  772.632873] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  772.632886] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  772.632891] [drm:wait_panel_status] Wait complete
>[  772.632897] [drm:wait_panel_on] Wait for panel power on
>[  772.632906] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  772.796163] [drm:wait_panel_status] Wait complete
>[  772.796174] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  772.796187] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  772.796208] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  772.796218] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  772.814574] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  772.814580] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  772.816201] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  772.818073] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  772.818668] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  772.818685] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  772.818690] [drm:intel_enable_pipe] enabling pipe A
>[  772.818712] [drm:intel_edp_backlight_on] 
>[  772.818717] [drm:intel_panel_enable_backlight] pipe A
>[  772.818724] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  772.818739] [drm:intel_psr_enable] PSR not supported by this panel
>[  772.835571] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  772.835587] [drm:verify_crtc_state] [CRTC:26]
>[  773.642044] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  773.645723] [drm:valleyview_enable_rps] GPLL enabled? yes
>[  773.645731] [drm:valleyview_enable_rps] GPU status: 0x0000c090
>[  773.645736] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192)
>[  773.645740] [drm:valleyview_enable_rps] setting GPU freq to 200 MHz (192)
>[  775.827619] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  775.827633] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  777.039958] pm_rpm: executing
>[  777.040152] [drm:i915_gem_open] 
>[  777.043448] [drm:i915_gem_open] 
>[  777.043776] [drm:drm_mode_addfb2] [FB:50]
>[  778.083942] pm_rpm: starting subtest basic-rte
>[  778.084093] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  778.084164] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  778.084207] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  778.091399] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  778.091428] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  778.091442] [drm:intel_edp_backlight_off] 
>[  778.294531] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  778.295046] [drm:edp_panel_off] Turn eDP port B panel power off
>[  778.295064] [drm:wait_panel_off] Wait for panel power off time
>[  778.295080] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  778.336010] [drm:wait_panel_status] Wait complete
>[  778.336053] [drm:intel_disable_pipe] disabling pipe A
>[  778.343139] [drm:intel_dp_link_down] 
>[  778.398629] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  778.398661] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  778.412689] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  778.412716] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  778.412736] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  778.412751] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  778.412765] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  778.412780] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  778.412794] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  778.412808] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  778.412821] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  778.412846] [drm:intel_power_well_disable] disabling dpio-common
>[  778.422492] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  778.431891] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  778.439260] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  778.447840] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  778.457637] [drm:intel_power_well_disable] disabling display
>[  778.467510] [drm:verify_crtc_state] [CRTC:26]
>[  778.467540] [drm:intel_power_well_disable] disabling always-on
>[  778.467628] [drm:drm_mode_setcrtc] [CRTC:31:crtc-1]
>[  778.467799] [drm:intel_runtime_suspend] Suspending device
>[  778.470442] [drm:intel_runtime_suspend] Device suspended
>[  778.568419] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  778.568455] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1]
>[  778.568525] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  778.568539] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  778.568558] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  778.568574] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  778.568585] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  778.568599] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  778.568615] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88007264b000 for pipe A
>[  778.568626] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  778.568636] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  778.568650] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  778.568664] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  778.568678] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  778.568688] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  778.568697] [drm:intel_dump_pipe_config] requested mode:
>[  778.568715] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  778.568725] [drm:intel_dump_pipe_config] adjusted mode:
>[  778.568742] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  778.568758] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  778.568768] [drm:intel_dump_pipe_config] port clock: 270000
>[  778.568778] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  778.568789] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  778.568801] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  778.568813] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  778.568822] [drm:intel_dump_pipe_config] ips: 0
>[  778.568831] [drm:intel_dump_pipe_config] double wide: 0
>[  778.568844] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  778.568853] [drm:intel_dump_pipe_config] planes on this crtc
>[  778.568866] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  778.568879] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  778.568892] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  778.568905] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  778.568927] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  778.582895] [drm:intel_runtime_resume] Resuming device
>[  778.585557] [drm:intel_runtime_resume] Device resumed
>[  778.585773] [drm:intel_power_well_enable] enabling always-on
>[  778.585792] [drm:intel_power_well_enable] enabling display
>[  778.595648] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  778.595982] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  778.605811] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  778.615671] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  778.625455] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  778.633925] [drm:intel_power_well_enable] enabling dpio-common
>[  778.657847] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  778.657876] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  778.657896] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  778.657907] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  778.657922] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  778.657936] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  778.657951] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  778.657965] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  778.706887] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  778.706917] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  778.706938] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  778.706949] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  778.902780] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  779.099510] [drm:wait_panel_status] Wait complete
>[  779.099540] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  779.099552] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  779.303508] [drm:edp_panel_on] Turn eDP port B panel power on
>[  779.303531] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  779.303549] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  779.303559] [drm:wait_panel_status] Wait complete
>[  779.303571] [drm:wait_panel_on] Wait for panel power on
>[  779.303585] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  779.456859] [drm:wait_panel_status] Wait complete
>[  779.456884] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  779.456902] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  779.456930] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  779.456946] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  779.474067] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  779.474087] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  779.475687] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  779.477549] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  779.478148] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  779.478174] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  779.478186] [drm:intel_enable_pipe] enabling pipe A
>[  779.478213] [drm:intel_edp_backlight_on] 
>[  779.478225] [drm:intel_panel_enable_backlight] pipe A
>[  779.478237] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  779.478257] [drm:intel_psr_enable] PSR not supported by this panel
>[  779.495390] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  779.495421] [drm:verify_crtc_state] [CRTC:26]
>[  779.498851] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  779.498898] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  779.512069] [drm:intel_edp_backlight_off] 
>[  779.659809] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  779.663385] [drm:valleyview_enable_rps] GPLL enabled? yes
>[  779.663405] [drm:valleyview_enable_rps] GPU status: 0x0000c090
>[  779.663511] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192)
>[  779.663522] [drm:valleyview_enable_rps] setting GPU freq to 200 MHz (192)
>[  779.715903] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  779.716390] [drm:edp_panel_off] Turn eDP port B panel power off
>[  779.716408] [drm:wait_panel_off] Wait for panel power off time
>[  779.716424] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  779.757267] [drm:wait_panel_status] Wait complete
>[  779.757311] [drm:intel_disable_pipe] disabling pipe A
>[  779.762267] [drm:intel_dp_link_down] 
>[  779.816034] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  779.816066] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  779.830180] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  779.830208] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  779.830229] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  779.830244] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  779.830258] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  779.830272] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  779.830286] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  779.830300] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  779.830313] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  779.830339] [drm:intel_power_well_disable] disabling dpio-common
>[  779.839889] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  779.849011] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  779.856292] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  779.865389] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  779.875293] [drm:intel_power_well_disable] disabling display
>[  779.885058] [drm:verify_crtc_state] [CRTC:26]
>[  779.885088] [drm:intel_power_well_disable] disabling always-on
>[  779.889861] pm_rpm: exiting, ret=0
>[  779.890268] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  779.890275] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  779.890288] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  779.890298] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  779.890303] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  779.890312] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  779.890321] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88007264f000 for pipe A
>[  779.890326] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  779.890331] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  779.890338] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  779.890347] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  779.890355] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  779.890360] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  779.890363] [drm:intel_dump_pipe_config] requested mode:
>[  779.890376] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  779.890380] [drm:intel_dump_pipe_config] adjusted mode:
>[  779.890391] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  779.890401] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  779.890406] [drm:intel_dump_pipe_config] port clock: 270000
>[  779.890410] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  779.890416] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  779.890422] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  779.890427] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  779.890431] [drm:intel_dump_pipe_config] ips: 0
>[  779.890435] [drm:intel_dump_pipe_config] double wide: 0
>[  779.890441] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  779.890445] [drm:intel_dump_pipe_config] planes on this crtc
>[  779.890452] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  779.890459] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  779.890466] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  779.890473] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  779.890484] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  779.890523] [drm:intel_power_well_enable] enabling always-on
>[  779.890532] [drm:intel_power_well_enable] enabling display
>[  779.897944] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  779.898262] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  779.904592] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  779.911958] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  779.921807] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  779.931556] [drm:intel_power_well_enable] enabling dpio-common
>[  779.955862] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  779.955877] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  779.955891] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  779.955896] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  779.955904] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  779.955913] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  779.955922] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  779.955929] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  780.004511] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  780.004528] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  780.004541] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  780.004546] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  780.130454] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  780.130488] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  780.130523] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  780.130555] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  780.130586] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  780.130610] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  780.324574] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  780.406497] [drm:wait_panel_status] Wait complete
>[  780.406513] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  780.406519] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  780.608854] [drm:edp_panel_on] Turn eDP port B panel power on
>[  780.608863] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  780.608876] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  780.608880] [drm:wait_panel_status] Wait complete
>[  780.608886] [drm:wait_panel_on] Wait for panel power on
>[  780.608895] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  780.771503] [drm:wait_panel_status] Wait complete
>[  780.771514] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  780.771527] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  780.771549] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  780.771559] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  780.790179] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  780.790185] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  780.791781] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  780.793648] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  780.794239] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  780.794257] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  780.794262] [drm:intel_enable_pipe] enabling pipe A
>[  780.794284] [drm:intel_edp_backlight_on] 
>[  780.794289] [drm:intel_panel_enable_backlight] pipe A
>[  780.794296] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  780.794311] [drm:intel_psr_enable] PSR not supported by this panel
>[  780.811294] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  780.811309] [drm:verify_crtc_state] [CRTC:26]
>[  783.803656] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  783.803675] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  784.964957] pm_rpm: executing
>[  784.965155] [drm:i915_gem_open] 
>[  784.968089] [drm:i915_gem_open] 
>[  784.968395] [drm:drm_mode_addfb2] [FB:50]
>[  786.008463] pm_rpm: starting subtest basic-rte
>[  786.008616] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  786.008687] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  786.008731] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  786.016887] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  786.016915] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  786.016929] [drm:intel_edp_backlight_off] 
>[  786.218454] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  786.218969] [drm:edp_panel_off] Turn eDP port B panel power off
>[  786.218986] [drm:wait_panel_off] Wait for panel power off time
>[  786.219002] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  786.259907] [drm:wait_panel_status] Wait complete
>[  786.259952] [drm:intel_disable_pipe] disabling pipe A
>[  786.267333] [drm:intel_dp_link_down] 
>[  786.322582] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  786.322614] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  786.333865] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  786.333893] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  786.333913] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  786.333929] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  786.333943] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  786.333956] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  786.333970] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  786.333984] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  786.333998] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  786.334023] [drm:intel_power_well_disable] disabling dpio-common
>[  786.343674] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  786.350876] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  786.359874] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  786.369875] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  786.379735] [drm:intel_power_well_disable] disabling display
>[  786.389561] [drm:verify_crtc_state] [CRTC:26]
>[  786.389591] [drm:intel_power_well_disable] disabling always-on
>[  786.389680] [drm:drm_mode_setcrtc] [CRTC:31:crtc-1]
>[  786.389853] [drm:intel_runtime_suspend] Suspending device
>[  786.392420] [drm:intel_runtime_suspend] Device suspended
>[  786.490444] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  786.490478] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1]
>[  786.490549] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  786.490563] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  786.490582] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  786.490598] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  786.490609] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  786.490623] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  786.490639] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880072648000 for pipe A
>[  786.490649] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  786.490659] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  786.490673] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  786.490688] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  786.490701] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  786.490712] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  786.490721] [drm:intel_dump_pipe_config] requested mode:
>[  786.490739] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  786.490748] [drm:intel_dump_pipe_config] adjusted mode:
>[  786.490765] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  786.490782] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  786.490792] [drm:intel_dump_pipe_config] port clock: 270000
>[  786.490802] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  786.490813] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  786.490825] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  786.490837] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  786.490846] [drm:intel_dump_pipe_config] ips: 0
>[  786.490855] [drm:intel_dump_pipe_config] double wide: 0
>[  786.490868] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  786.490877] [drm:intel_dump_pipe_config] planes on this crtc
>[  786.490890] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  786.490903] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  786.490916] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  786.490929] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  786.490952] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  786.506823] [drm:intel_runtime_resume] Resuming device
>[  786.509478] [drm:intel_runtime_resume] Device resumed
>[  786.509697] [drm:intel_power_well_enable] enabling always-on
>[  786.509715] [drm:intel_power_well_enable] enabling display
>[  786.519311] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  786.519646] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  786.529462] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  786.537889] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  786.547313] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  786.556899] [drm:intel_power_well_enable] enabling dpio-common
>[  786.580663] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  786.580691] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  786.580711] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  786.580722] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  786.580737] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  786.580752] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  786.580766] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  786.580779] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  786.628336] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  786.628366] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  786.628387] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  786.628398] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  786.822777] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  787.027366] [drm:wait_panel_status] Wait complete
>[  787.027395] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  787.027408] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  787.231457] [drm:edp_panel_on] Turn eDP port B panel power on
>[  787.231481] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  787.231499] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  787.231510] [drm:wait_panel_status] Wait complete
>[  787.231522] [drm:wait_panel_on] Wait for panel power on
>[  787.231535] [drm:wait_panel_status] mask b000000f value 80000008 status 9000000a control abcd000b
>[  787.394814] [drm:wait_panel_status] Wait complete
>[  787.394840] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  787.394858] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  787.394885] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  787.394902] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  787.413795] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  787.413815] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  787.415427] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  787.417295] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  787.417893] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  787.417919] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  787.417931] [drm:intel_enable_pipe] enabling pipe A
>[  787.417958] [drm:intel_edp_backlight_on] 
>[  787.417969] [drm:intel_panel_enable_backlight] pipe A
>[  787.417981] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  787.418002] [drm:intel_psr_enable] PSR not supported by this panel
>[  787.435280] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  787.435313] [drm:verify_crtc_state] [CRTC:26]
>[  787.438860] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  787.438909] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  787.452012] [drm:intel_edp_backlight_off] 
>[  787.655761] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  787.656268] [drm:edp_panel_off] Turn eDP port B panel power off
>[  787.656286] [drm:wait_panel_off] Wait for panel power off time
>[  787.656303] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  787.668146] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  787.671911] [drm:valleyview_enable_rps] GPLL enabled? yes
>[  787.671933] [drm:valleyview_enable_rps] GPU status: 0x0000c090
>[  787.671970] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192)
>[  787.671981] [drm:valleyview_enable_rps] setting GPU freq to 200 MHz (192)
>[  787.696984] [drm:wait_panel_status] Wait complete
>[  787.697028] [drm:intel_disable_pipe] disabling pipe A
>[  787.704009] [drm:intel_dp_link_down] 
>[  787.760014] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  787.760046] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  787.774598] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  787.774626] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  787.774648] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  787.774663] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  787.774677] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  787.774691] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  787.774705] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  787.774718] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  787.774732] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  787.774757] [drm:intel_power_well_disable] disabling dpio-common
>[  787.781785] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  787.791278] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  787.801043] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  787.810618] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  787.819346] [drm:intel_power_well_disable] disabling display
>[  787.829229] [drm:verify_crtc_state] [CRTC:26]
>[  787.829260] [drm:intel_power_well_disable] disabling always-on
>[  787.829345] [drm:intel_runtime_suspend] Suspending device
>[  787.831963] [drm:intel_runtime_suspend] Device suspended
>[  787.864172] [drm:intel_runtime_resume] Resuming device
>[  787.866828] [drm:intel_runtime_resume] Device resumed
>[  787.871401] pm_rpm: exiting, ret=0
>[  787.871895] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  787.871902] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  787.871916] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  787.871933] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  787.871939] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  787.871947] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  787.871957] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88007264c800 for pipe A
>[  787.871961] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  787.871966] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  787.871974] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  787.871983] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  787.871990] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  787.871995] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  787.871998] [drm:intel_dump_pipe_config] requested mode:
>[  787.872011] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  787.872015] [drm:intel_dump_pipe_config] adjusted mode:
>[  787.872027] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  787.872037] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  787.872041] [drm:intel_dump_pipe_config] port clock: 270000
>[  787.872046] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  787.872051] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  787.872057] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  787.872063] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  787.872067] [drm:intel_dump_pipe_config] ips: 0
>[  787.872071] [drm:intel_dump_pipe_config] double wide: 0
>[  787.872078] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  787.872089] [drm:intel_dump_pipe_config] planes on this crtc
>[  787.872096] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  787.872103] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  787.872110] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  787.872117] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  787.872127] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  787.872166] [drm:intel_power_well_enable] enabling always-on
>[  787.872175] [drm:intel_power_well_enable] enabling display
>[  787.875923] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  787.876241] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  787.884608] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  787.894374] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  787.904168] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  787.913715] [drm:intel_power_well_enable] enabling dpio-common
>[  787.938211] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  787.938225] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  787.938239] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  787.938244] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  787.938253] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  787.938262] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  787.938271] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  787.938278] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  787.987281] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  787.987298] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  787.987310] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  787.987316] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  788.260490] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  788.395029] [drm:wait_panel_status] Wait complete
>[  788.395045] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  788.395051] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  788.596791] [drm:edp_panel_on] Turn eDP port B panel power on
>[  788.596799] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  788.596813] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  788.596817] [drm:wait_panel_status] Wait complete
>[  788.596824] [drm:wait_panel_on] Wait for panel power on
>[  788.596832] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  788.760245] [drm:wait_panel_status] Wait complete
>[  788.760256] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  788.760269] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  788.760290] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  788.760301] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  788.778634] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  788.778640] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  788.780240] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  788.782105] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  788.782697] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  788.782715] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  788.782720] [drm:intel_enable_pipe] enabling pipe A
>[  788.782742] [drm:intel_edp_backlight_on] 
>[  788.782747] [drm:intel_panel_enable_backlight] pipe A
>[  788.782754] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  788.782769] [drm:intel_psr_enable] PSR not supported by this panel
>[  788.799601] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  788.799616] [drm:verify_crtc_state] [CRTC:26]
>[  789.245863] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  789.245895] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  789.245916] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  789.245926] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  789.245935] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  789.245946] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  789.669727] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  789.673819] [drm:valleyview_enable_rps] GPLL enabled? yes
>[  789.673832] [drm:valleyview_enable_rps] GPU status: 0x0000c090
>[  789.673841] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192)
>[  789.673848] [drm:valleyview_enable_rps] setting GPU freq to 200 MHz (192)
>[  791.787731] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  791.787742] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  792.032124] pm_rpm: executing
>[  792.032338] [drm:i915_gem_open] 
>[  792.035358] [drm:i915_gem_open] 
>[  792.035696] [drm:drm_mode_addfb2] [FB:50]
>[  793.076247] pm_rpm: starting subtest basic-rte
>[  793.076411] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  793.076482] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  793.076525] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  793.087735] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  793.087763] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  793.087777] [drm:intel_edp_backlight_off] 
>[  793.289230] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  793.289762] [drm:edp_panel_off] Turn eDP port B panel power off
>[  793.289781] [drm:wait_panel_off] Wait for panel power off time
>[  793.289799] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  793.330466] [drm:wait_panel_status] Wait complete
>[  793.330509] [drm:intel_disable_pipe] disabling pipe A
>[  793.337792] [drm:intel_dp_link_down] 
>[  793.393275] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  793.393307] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  793.407929] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  793.407957] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  793.407978] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  793.407993] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  793.408007] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  793.408021] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  793.408035] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  793.408049] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  793.408062] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  793.408088] [drm:intel_power_well_disable] disabling dpio-common
>[  793.417539] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  793.426906] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  793.434381] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  793.441523] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  793.450928] [drm:intel_power_well_disable] disabling display
>[  793.457901] [drm:verify_crtc_state] [CRTC:26]
>[  793.457930] [drm:intel_power_well_disable] disabling always-on
>[  793.458018] [drm:drm_mode_setcrtc] [CRTC:31:crtc-1]
>[  793.458188] [drm:intel_runtime_suspend] Suspending device
>[  793.460785] [drm:intel_runtime_suspend] Device suspended
>[  793.558789] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  793.558824] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1]
>[  793.558894] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  793.558908] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  793.558926] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  793.558943] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  793.558954] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  793.558968] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  793.558984] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880178d34000 for pipe A
>[  793.558994] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  793.559004] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  793.559018] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  793.559033] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  793.559046] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  793.559057] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  793.559066] [drm:intel_dump_pipe_config] requested mode:
>[  793.559084] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  793.559094] [drm:intel_dump_pipe_config] adjusted mode:
>[  793.559111] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  793.559127] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  793.559137] [drm:intel_dump_pipe_config] port clock: 270000
>[  793.559147] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  793.559158] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  793.559170] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  793.559181] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  793.559191] [drm:intel_dump_pipe_config] ips: 0
>[  793.559200] [drm:intel_dump_pipe_config] double wide: 0
>[  793.559212] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  793.559221] [drm:intel_dump_pipe_config] planes on this crtc
>[  793.559234] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  793.559247] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  793.559260] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  793.559273] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  793.559295] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  793.573886] [drm:intel_runtime_resume] Resuming device
>[  793.576579] [drm:intel_runtime_resume] Device resumed
>[  793.576794] [drm:intel_power_well_enable] enabling always-on
>[  793.576813] [drm:intel_power_well_enable] enabling display
>[  793.586768] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  793.587102] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  793.594467] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  793.604258] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  793.611099] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  793.618645] [drm:intel_power_well_enable] enabling dpio-common
>[  793.643122] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  793.643150] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  793.643171] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  793.643182] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  793.643197] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  793.643212] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  793.643226] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  793.643240] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  793.690842] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  793.690872] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  793.690893] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  793.690904] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  793.894137] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  794.093583] [drm:wait_panel_status] Wait complete
>[  794.093612] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  794.093625] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  794.294531] [drm:edp_panel_on] Turn eDP port B panel power on
>[  794.294554] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  794.294573] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  794.294583] [drm:wait_panel_status] Wait complete
>[  794.294595] [drm:wait_panel_on] Wait for panel power on
>[  794.294608] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  794.458313] [drm:wait_panel_status] Wait complete
>[  794.458339] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  794.458357] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  794.458385] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  794.458401] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  794.477101] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  794.477121] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  794.478747] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  794.480606] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  794.481206] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  794.481232] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  794.481244] [drm:intel_enable_pipe] enabling pipe A
>[  794.481271] [drm:intel_edp_backlight_on] 
>[  794.481283] [drm:intel_panel_enable_backlight] pipe A
>[  794.481295] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  794.481315] [drm:intel_psr_enable] PSR not supported by this panel
>[  794.498444] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  794.498475] [drm:verify_crtc_state] [CRTC:26]
>[  794.501906] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  794.501953] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  794.515120] [drm:intel_edp_backlight_off] 
>[  794.663167] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  794.667242] [drm:valleyview_enable_rps] GPLL enabled? yes
>[  794.667261] [drm:valleyview_enable_rps] GPU status: 0x0000c090
>[  794.667274] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192)
>[  794.667284] [drm:valleyview_enable_rps] setting GPU freq to 200 MHz (192)
>[  794.718977] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  794.719485] [drm:edp_panel_off] Turn eDP port B panel power off
>[  794.719502] [drm:wait_panel_off] Wait for panel power off time
>[  794.719519] [drm:wait_panel_status] mask b0000000 value 00000000 status e0000003 control abcd0000
>[  794.760396] [drm:wait_panel_status] Wait complete
>[  794.760441] [drm:intel_disable_pipe] disabling pipe A
>[  794.765389] [drm:intel_dp_link_down] 
>[  794.819071] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  794.819103] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  794.832921] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  794.832948] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  794.832969] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  794.832985] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  794.832999] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  794.833012] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  794.833026] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  794.833040] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  794.833053] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  794.833078] [drm:intel_power_well_disable] disabling dpio-common
>[  794.842850] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  794.851356] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  794.859993] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  794.869683] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  794.876357] [drm:intel_power_well_disable] disabling display
>[  794.886180] [drm:verify_crtc_state] [CRTC:26]
>[  794.886210] [drm:intel_power_well_disable] disabling always-on
>[  794.886295] [drm:intel_runtime_suspend] Suspending device
>[  794.888847] [drm:intel_runtime_suspend] Device suspended
>[  794.919229] [drm:intel_runtime_resume] Resuming device
>[  794.921927] [drm:intel_runtime_resume] Device resumed
>[  794.926458] pm_rpm: exiting, ret=0
>[  794.926944] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  794.926951] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  794.926964] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  794.926974] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  794.926979] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  794.926987] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  794.926998] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880178d30800 for pipe A
>[  794.927002] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  794.927007] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  794.927015] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  794.927024] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  794.927031] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  794.927036] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  794.927039] [drm:intel_dump_pipe_config] requested mode:
>[  794.927053] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  794.927064] [drm:intel_dump_pipe_config] adjusted mode:
>[  794.927075] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  794.927086] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  794.927090] [drm:intel_dump_pipe_config] port clock: 270000
>[  794.927095] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  794.927100] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  794.927106] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  794.927111] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  794.927115] [drm:intel_dump_pipe_config] ips: 0
>[  794.927119] [drm:intel_dump_pipe_config] double wide: 0
>[  794.927126] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  794.927129] [drm:intel_dump_pipe_config] planes on this crtc
>[  794.927136] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  794.927143] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  794.927150] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  794.927157] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  794.927167] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  794.927206] [drm:intel_power_well_enable] enabling always-on
>[  794.927221] [drm:intel_power_well_enable] enabling display
>[  794.931750] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  794.932068] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  794.941554] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  794.950944] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  794.960788] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  794.970511] [drm:intel_power_well_enable] enabling dpio-common
>[  794.995011] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  794.995025] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  794.995039] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  794.995044] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  794.995052] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  794.995061] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  794.995070] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  794.995078] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  795.043342] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  795.043358] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  795.043370] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  795.043376] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  795.327484] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  795.450125] [drm:wait_panel_status] Wait complete
>[  795.450141] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  795.450147] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  795.651751] [drm:edp_panel_on] Turn eDP port B panel power on
>[  795.651760] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  795.651773] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  795.651778] [drm:wait_panel_status] Wait complete
>[  795.651784] [drm:wait_panel_on] Wait for panel power on
>[  795.651793] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  795.814157] [drm:wait_panel_status] Wait complete
>[  795.814168] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  795.814181] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  795.814203] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  795.814213] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  795.832773] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  795.832779] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  795.834381] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  795.836248] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  795.836842] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  795.836859] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  795.836864] [drm:intel_enable_pipe] enabling pipe A
>[  795.836886] [drm:intel_edp_backlight_on] 
>[  795.836891] [drm:intel_panel_enable_backlight] pipe A
>[  795.836898] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  795.836913] [drm:intel_psr_enable] PSR not supported by this panel
>[  795.853746] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  795.853761] [drm:verify_crtc_state] [CRTC:26]
>[  796.664983] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  796.668983] [drm:valleyview_enable_rps] GPLL enabled? yes
>[  796.668999] [drm:valleyview_enable_rps] GPU status: 0x0000c090
>[  796.669009] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192)
>[  796.669018] [drm:valleyview_enable_rps] setting GPU freq to 200 MHz (192)
>[  798.371812] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  798.371847] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  798.371881] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  798.371912] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  798.371939] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  798.371966] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  798.842766] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  798.842790] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  799.939837] pm_rpm: executing
>[  799.940037] [drm:i915_gem_open] 
>[  799.943341] [drm:i915_gem_open] 
>[  799.943668] [drm:drm_mode_addfb2] [FB:50]
>[  800.983312] pm_rpm: starting subtest basic-rte
>[  800.983463] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  800.983532] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  800.983576] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  800.992826] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  800.992855] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  800.992869] [drm:intel_edp_backlight_off] 
>[  801.197432] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  801.197947] [drm:edp_panel_off] Turn eDP port B panel power off
>[  801.197965] [drm:wait_panel_off] Wait for panel power off time
>[  801.197981] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  801.238971] [drm:wait_panel_status] Wait complete
>[  801.239015] [drm:intel_disable_pipe] disabling pipe A
>[  801.244287] [drm:intel_dp_link_down] 
>[  801.297604] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  801.297636] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  801.311740] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  801.311768] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  801.311788] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  801.311803] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  801.311817] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  801.311831] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  801.311845] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  801.311859] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  801.311872] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  801.311897] [drm:intel_power_well_disable] disabling dpio-common
>[  801.321335] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  801.328351] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  801.337981] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  801.345075] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  801.352378] [drm:intel_power_well_disable] disabling display
>[  801.362022] [drm:verify_crtc_state] [CRTC:26]
>[  801.362052] [drm:intel_power_well_disable] disabling always-on
>[  801.362107] [drm:intel_runtime_suspend] Suspending device
>[  801.362237] [drm:drm_mode_setcrtc] [CRTC:31:crtc-1]
>[  801.364774] [drm:intel_runtime_suspend] Device suspended
>[  801.463019] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  801.463055] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1]
>[  801.463124] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  801.463139] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  801.463157] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  801.463173] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  801.463184] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  801.463199] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  801.463215] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880178d31800 for pipe A
>[  801.463225] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  801.463235] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  801.463248] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  801.463263] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  801.463277] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  801.463287] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  801.463296] [drm:intel_dump_pipe_config] requested mode:
>[  801.463314] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  801.463324] [drm:intel_dump_pipe_config] adjusted mode:
>[  801.463341] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  801.463357] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  801.463367] [drm:intel_dump_pipe_config] port clock: 270000
>[  801.463377] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  801.463388] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  801.463400] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  801.463411] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  801.463421] [drm:intel_dump_pipe_config] ips: 0
>[  801.463430] [drm:intel_dump_pipe_config] double wide: 0
>[  801.463442] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  801.463451] [drm:intel_dump_pipe_config] planes on this crtc
>[  801.463464] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  801.463477] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  801.463490] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  801.463503] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  801.463526] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  801.477796] [drm:intel_runtime_resume] Resuming device
>[  801.480451] [drm:intel_runtime_resume] Device resumed
>[  801.480670] [drm:intel_power_well_enable] enabling always-on
>[  801.480689] [drm:intel_power_well_enable] enabling display
>[  801.490296] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  801.490630] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  801.500575] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  801.509912] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  801.518985] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  801.528538] [drm:intel_power_well_enable] enabling dpio-common
>[  801.552340] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  801.552368] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  801.552389] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  801.552400] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  801.552415] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  801.552429] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  801.552444] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  801.552458] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  801.600920] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  801.600950] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  801.600971] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  801.600982] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  801.802102] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  801.999407] [drm:wait_panel_status] Wait complete
>[  801.999436] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  801.999449] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  802.202254] [drm:edp_panel_on] Turn eDP port B panel power on
>[  802.202277] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  802.202295] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  802.202306] [drm:wait_panel_status] Wait complete
>[  802.202318] [drm:wait_panel_on] Wait for panel power on
>[  802.202332] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  802.365913] [drm:wait_panel_status] Wait complete
>[  802.365939] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  802.365957] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  802.365985] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  802.366001] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  802.384636] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  802.384656] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  802.386665] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  802.388528] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  802.389129] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  802.389155] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  802.389167] [drm:intel_enable_pipe] enabling pipe A
>[  802.389195] [drm:intel_edp_backlight_on] 
>[  802.389207] [drm:intel_panel_enable_backlight] pipe A
>[  802.389219] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  802.389239] [drm:intel_psr_enable] PSR not supported by this panel
>[  802.406072] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  802.406099] [drm:verify_crtc_state] [CRTC:26]
>[  802.409627] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  802.409676] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  802.423077] [drm:intel_edp_backlight_off] 
>[  802.626880] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  802.627388] [drm:edp_panel_off] Turn eDP port B panel power off
>[  802.627406] [drm:wait_panel_off] Wait for panel power off time
>[  802.627422] [drm:wait_panel_status] mask b0000000 value 00000000 status e0000003 control abcd0000
>[  802.668338] [drm:wait_panel_status] Wait complete
>[  802.668383] [drm:intel_disable_pipe] disabling pipe A
>[  802.671450] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  802.673360] [drm:intel_dp_link_down] 
>[  802.673828] [drm:valleyview_enable_rps] GPLL enabled? yes
>[  802.673846] [drm:valleyview_enable_rps] GPU status: 0x0000c090
>[  802.673859] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192)
>[  802.673870] [drm:valleyview_enable_rps] setting GPU freq to 200 MHz (192)
>[  802.727003] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  802.727034] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  802.740774] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  802.740803] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  802.740824] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  802.740839] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  802.740853] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  802.740867] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  802.740881] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  802.740895] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  802.740908] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  802.740934] [drm:intel_power_well_disable] disabling dpio-common
>[  802.750343] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  802.760043] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  802.769706] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  802.778194] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  802.787975] [drm:intel_power_well_disable] disabling display
>[  802.797485] [drm:verify_crtc_state] [CRTC:26]
>[  802.797514] [drm:intel_power_well_disable] disabling always-on
>[  802.797597] [drm:intel_runtime_suspend] Suspending device
>[  802.799141] [drm:intel_runtime_suspend] Device suspended
>[  802.831157] [drm:intel_runtime_resume] Resuming device
>[  802.833798] [drm:intel_runtime_resume] Device resumed
>[  802.838372] pm_rpm: exiting, ret=0
>[  802.838930] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  802.838937] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  802.838951] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  802.838961] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  802.838966] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  802.838975] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  802.838985] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880178d35000 for pipe A
>[  802.838990] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  802.838994] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  802.839002] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  802.839019] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  802.839026] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  802.839031] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  802.839034] [drm:intel_dump_pipe_config] requested mode:
>[  802.839048] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  802.839051] [drm:intel_dump_pipe_config] adjusted mode:
>[  802.839063] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  802.839073] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  802.839078] [drm:intel_dump_pipe_config] port clock: 270000
>[  802.839082] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  802.839088] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  802.839094] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  802.839099] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  802.839103] [drm:intel_dump_pipe_config] ips: 0
>[  802.839107] [drm:intel_dump_pipe_config] double wide: 0
>[  802.839113] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  802.839117] [drm:intel_dump_pipe_config] planes on this crtc
>[  802.839124] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  802.839131] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  802.839138] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  802.839145] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  802.839155] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  802.839198] [drm:intel_power_well_enable] enabling always-on
>[  802.839207] [drm:intel_power_well_enable] enabling display
>[  802.845484] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  802.845803] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  802.855330] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  802.861944] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  802.871703] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  802.881502] [drm:intel_power_well_enable] enabling dpio-common
>[  802.905771] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  802.905785] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  802.905799] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  802.905804] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  802.905813] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  802.905822] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  802.905831] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  802.905839] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  802.954484] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  802.954501] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  802.954513] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  802.954519] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  803.231489] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  803.354289] [drm:wait_panel_status] Wait complete
>[  803.354305] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  803.354311] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  803.555778] [drm:edp_panel_on] Turn eDP port B panel power on
>[  803.555787] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  803.555800] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  803.555804] [drm:wait_panel_status] Wait complete
>[  803.555811] [drm:wait_panel_on] Wait for panel power on
>[  803.555819] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  803.719179] [drm:wait_panel_status] Wait complete
>[  803.719190] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  803.719203] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  803.719224] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  803.719235] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  803.737826] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  803.737832] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  803.739433] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  803.741299] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  803.741894] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  803.741911] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  803.741916] [drm:intel_enable_pipe] enabling pipe A
>[  803.741938] [drm:intel_edp_backlight_on] 
>[  803.741943] [drm:intel_panel_enable_backlight] pipe A
>[  803.741950] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  803.741965] [drm:intel_psr_enable] PSR not supported by this panel
>[  803.758797] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  803.758812] [drm:verify_crtc_state] [CRTC:26]
>[  804.677100] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  804.680902] [drm:valleyview_enable_rps] GPLL enabled? yes
>[  804.680912] [drm:valleyview_enable_rps] GPU status: 0x0000c090
>[  804.680918] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192)
>[  804.680922] [drm:valleyview_enable_rps] setting GPU freq to 200 MHz (192)
>[  806.746756] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  806.746770] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  807.493899] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  807.493946] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  807.493996] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  807.494039] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  807.494080] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  807.494122] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  807.655305] pm_rpm: executing
>[  807.655699] [drm:i915_gem_open] 
>[  807.659025] [drm:i915_gem_open] 
>[  807.659355] [drm:drm_mode_addfb2] [FB:50]
>[  808.699378] pm_rpm: starting subtest basic-rte
>[  808.699530] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  808.699600] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  808.699644] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  808.714280] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  808.714308] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  808.714322] [drm:intel_edp_backlight_off] 
>[  808.917114] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  808.917628] [drm:edp_panel_off] Turn eDP port B panel power off
>[  808.917646] [drm:wait_panel_off] Wait for panel power off time
>[  808.917663] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  808.958637] [drm:wait_panel_status] Wait complete
>[  808.958681] [drm:intel_disable_pipe] disabling pipe A
>[  808.965035] [drm:intel_dp_link_down] 
>[  809.021288] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  809.021320] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  809.035406] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  809.035434] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  809.035455] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  809.035470] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  809.035484] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  809.035498] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  809.035512] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  809.035526] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  809.035540] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  809.035565] [drm:intel_power_well_disable] disabling dpio-common
>[  809.044793] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  809.054527] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  809.061946] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  809.069145] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  809.078209] [drm:intel_power_well_disable] disabling display
>[  809.088128] [drm:verify_crtc_state] [CRTC:26]
>[  809.088158] [drm:intel_power_well_disable] disabling always-on
>[  809.088248] [drm:drm_mode_setcrtc] [CRTC:31:crtc-1]
>[  809.088423] [drm:intel_runtime_suspend] Suspending device
>[  809.091031] [drm:intel_runtime_suspend] Device suspended
>[  809.189041] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  809.189077] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1]
>[  809.189147] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  809.189160] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  809.189180] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  809.189196] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  809.189206] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  809.189221] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  809.189237] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88007264d800 for pipe A
>[  809.189247] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  809.189257] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  809.189270] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  809.189285] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  809.189299] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  809.189309] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  809.189318] [drm:intel_dump_pipe_config] requested mode:
>[  809.189336] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  809.189346] [drm:intel_dump_pipe_config] adjusted mode:
>[  809.189363] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  809.189379] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  809.189389] [drm:intel_dump_pipe_config] port clock: 270000
>[  809.189399] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  809.189410] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  809.189422] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  809.189434] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  809.189443] [drm:intel_dump_pipe_config] ips: 0
>[  809.189452] [drm:intel_dump_pipe_config] double wide: 0
>[  809.189464] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  809.189474] [drm:intel_dump_pipe_config] planes on this crtc
>[  809.189487] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  809.189500] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  809.189513] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  809.189526] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  809.189549] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  809.205602] [drm:intel_runtime_resume] Resuming device
>[  809.207995] [drm:intel_runtime_resume] Device resumed
>[  809.208208] [drm:intel_power_well_enable] enabling always-on
>[  809.208226] [drm:intel_power_well_enable] enabling display
>[  809.217814] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  809.218149] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  809.227923] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  809.236840] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  809.246579] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  809.256096] [drm:intel_power_well_enable] enabling dpio-common
>[  809.278395] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  809.278423] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  809.278444] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  809.278455] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  809.278469] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  809.278484] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  809.278498] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  809.278512] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  809.327332] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  809.327363] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  809.327383] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  809.327395] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  809.521768] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  809.726386] [drm:wait_panel_status] Wait complete
>[  809.726415] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  809.726428] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  809.930202] [drm:edp_panel_on] Turn eDP port B panel power on
>[  809.930226] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  809.930245] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  809.930255] [drm:wait_panel_status] Wait complete
>[  809.930267] [drm:wait_panel_on] Wait for panel power on
>[  809.930281] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  810.088993] [drm:wait_panel_status] Wait complete
>[  810.089019] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  810.089038] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  810.089066] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  810.089082] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  810.108051] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  810.108071] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  810.109653] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  810.111767] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  810.112367] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  810.112394] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  810.112406] [drm:intel_enable_pipe] enabling pipe A
>[  810.112433] [drm:intel_edp_backlight_on] 
>[  810.112445] [drm:intel_panel_enable_backlight] pipe A
>[  810.112457] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  810.112477] [drm:intel_psr_enable] PSR not supported by this panel
>[  810.129687] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  810.129720] [drm:verify_crtc_state] [CRTC:26]
>[  810.133189] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  810.133237] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  810.146318] [drm:intel_edp_backlight_off] 
>[  810.350573] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  810.351079] [drm:edp_panel_off] Turn eDP port B panel power off
>[  810.351097] [drm:wait_panel_off] Wait for panel power off time
>[  810.351113] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  810.391984] [drm:wait_panel_status] Wait complete
>[  810.392028] [drm:intel_disable_pipe] disabling pipe A
>[  810.396937] [drm:intel_dp_link_down] 
>[  810.450701] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  810.450733] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  810.462014] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  810.462041] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  810.462062] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  810.462078] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  810.462092] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  810.462106] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  810.462120] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  810.462134] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  810.462147] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  810.462173] [drm:intel_power_well_disable] disabling dpio-common
>[  810.471524] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  810.481312] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  810.487556] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  810.497400] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  810.503566] [drm:intel_power_well_disable] disabling display
>[  810.513403] [drm:verify_crtc_state] [CRTC:26]
>[  810.513433] [drm:intel_power_well_disable] disabling always-on
>[  810.518375] pm_rpm: exiting, ret=0
>[  810.518782] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  810.518789] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  810.518802] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  810.518812] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  810.518817] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  810.518825] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  810.518835] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880178d37000 for pipe A
>[  810.518840] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  810.518845] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  810.518852] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  810.518861] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  810.518869] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  810.518873] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  810.518877] [drm:intel_dump_pipe_config] requested mode:
>[  810.518890] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  810.518893] [drm:intel_dump_pipe_config] adjusted mode:
>[  810.518905] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  810.518915] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  810.518919] [drm:intel_dump_pipe_config] port clock: 270000
>[  810.518924] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  810.518929] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  810.518935] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  810.518941] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  810.518945] [drm:intel_dump_pipe_config] ips: 0
>[  810.518948] [drm:intel_dump_pipe_config] double wide: 0
>[  810.518955] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  810.518958] [drm:intel_dump_pipe_config] planes on this crtc
>[  810.518966] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  810.518973] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  810.518980] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  810.518987] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  810.518998] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  810.519035] [drm:intel_power_well_enable] enabling always-on
>[  810.519043] [drm:intel_power_well_enable] enabling display
>[  810.526206] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  810.526528] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  810.535530] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  810.545348] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  810.555140] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  810.564920] [drm:intel_power_well_enable] enabling dpio-common
>[  810.589492] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  810.589506] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  810.589520] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  810.589525] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  810.589534] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  810.589543] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  810.589552] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  810.589559] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  810.638648] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  810.638664] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  810.638677] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  810.638682] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  810.691219] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  810.693667] [drm:valleyview_enable_rps] GPLL enabled? yes
>[  810.693675] [drm:valleyview_enable_rps] GPU status: 0x0000c090
>[  810.693682] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192)
>[  810.693687] [drm:valleyview_enable_rps] setting GPU freq to 200 MHz (192)
>[  810.958975] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  811.040073] [drm:wait_panel_status] Wait complete
>[  811.040089] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  811.040094] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  811.243486] [drm:edp_panel_on] Turn eDP port B panel power on
>[  811.243494] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  811.243507] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  811.243512] [drm:wait_panel_status] Wait complete
>[  811.243518] [drm:wait_panel_on] Wait for panel power on
>[  811.243527] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  811.406886] [drm:wait_panel_status] Wait complete
>[  811.406897] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  811.406910] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  811.406932] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  811.406942] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  811.425516] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  811.425522] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  811.427119] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  811.428979] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  811.429572] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  811.429590] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  811.429595] [drm:intel_enable_pipe] enabling pipe A
>[  811.429616] [drm:intel_edp_backlight_on] 
>[  811.429621] [drm:intel_panel_enable_backlight] pipe A
>[  811.429629] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  811.429643] [drm:intel_psr_enable] PSR not supported by this panel
>[  811.446478] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  811.446494] [drm:verify_crtc_state] [CRTC:26]
>[  814.434414] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  814.434436] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  815.620317] pm_rpm: executing
>[  815.620548] [drm:i915_gem_open] 
>[  815.624082] [drm:i915_gem_open] 
>[  815.624367] [drm:drm_mode_addfb2] [FB:50]
>[  816.610468] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  816.610514] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  816.610562] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  816.610605] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  816.610646] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  816.610687] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  816.664217] pm_rpm: starting subtest basic-rte
>[  816.664383] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  816.664553] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  816.664601] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  816.669076] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  816.669107] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  816.669121] [drm:intel_edp_backlight_off] 
>[  816.873096] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  816.873608] [drm:edp_panel_off] Turn eDP port B panel power off
>[  816.873626] [drm:wait_panel_off] Wait for panel power off time
>[  816.873642] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  816.914552] [drm:wait_panel_status] Wait complete
>[  816.914596] [drm:intel_disable_pipe] disabling pipe A
>[  816.919555] [drm:intel_dp_link_down] 
>[  816.973336] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  816.973367] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  816.982596] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  816.982624] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  816.982645] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  816.982660] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  816.982674] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  816.982688] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  816.982702] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  816.982716] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  816.982730] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  816.982755] [drm:intel_power_well_disable] disabling dpio-common
>[  816.993255] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  817.001876] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  817.005917] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  817.015537] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  817.022287] [drm:intel_power_well_disable] disabling display
>[  817.032108] [drm:verify_crtc_state] [CRTC:26]
>[  817.032138] [drm:intel_power_well_disable] disabling always-on
>[  817.032192] [drm:intel_runtime_suspend] Suspending device
>[  817.032321] [drm:drm_mode_setcrtc] [CRTC:31:crtc-1]
>[  817.034543] [drm:intel_runtime_suspend] Device suspended
>[  817.133040] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  817.133078] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1]
>[  817.133149] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  817.133163] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  817.133181] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  817.133198] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  817.133209] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  817.133223] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  817.133239] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88007264d800 for pipe A
>[  817.133249] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  817.133259] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  817.133272] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  817.133287] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  817.133300] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  817.133311] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  817.133319] [drm:intel_dump_pipe_config] requested mode:
>[  817.133338] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  817.133347] [drm:intel_dump_pipe_config] adjusted mode:
>[  817.133364] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  817.133381] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  817.133391] [drm:intel_dump_pipe_config] port clock: 270000
>[  817.133401] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  817.133412] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  817.133423] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  817.133435] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  817.133444] [drm:intel_dump_pipe_config] ips: 0
>[  817.133453] [drm:intel_dump_pipe_config] double wide: 0
>[  817.133466] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  817.133475] [drm:intel_dump_pipe_config] planes on this crtc
>[  817.133488] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  817.133501] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  817.133514] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  817.133528] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  817.133550] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  817.149459] [drm:intel_runtime_resume] Resuming device
>[  817.152094] [drm:intel_runtime_resume] Device resumed
>[  817.152311] [drm:intel_power_well_enable] enabling always-on
>[  817.152329] [drm:intel_power_well_enable] enabling display
>[  817.161900] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  817.162234] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  817.172098] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  817.178318] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  817.185609] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  817.194423] [drm:intel_power_well_enable] enabling dpio-common
>[  817.218822] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  817.218850] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  817.218871] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  817.218882] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  817.218897] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  817.218912] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  817.218926] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  817.218940] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  817.267330] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  817.267360] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  817.267380] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  817.267392] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  817.477710] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  817.661914] [drm:wait_panel_status] Wait complete
>[  817.661942] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  817.661955] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  817.866095] [drm:edp_panel_on] Turn eDP port B panel power on
>[  817.866119] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  817.866137] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  817.866148] [drm:wait_panel_status] Wait complete
>[  817.866159] [drm:wait_panel_on] Wait for panel power on
>[  817.866173] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  818.029547] [drm:wait_panel_status] Wait complete
>[  818.029572] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  818.029590] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  818.029618] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  818.029634] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  818.048083] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  818.048102] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  818.049680] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  818.051891] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  818.052493] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  818.052520] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  818.052531] [drm:intel_enable_pipe] enabling pipe A
>[  818.052559] [drm:intel_edp_backlight_on] 
>[  818.052571] [drm:intel_panel_enable_backlight] pipe A
>[  818.052583] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  818.052603] [drm:intel_psr_enable] PSR not supported by this panel
>[  818.069732] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  818.069763] [drm:verify_crtc_state] [CRTC:26]
>[  818.073200] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  818.073248] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  818.086394] [drm:intel_edp_backlight_off] 
>[  818.290516] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  818.291022] [drm:edp_panel_off] Turn eDP port B panel power off
>[  818.291040] [drm:wait_panel_off] Wait for panel power off time
>[  818.291057] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  818.331949] [drm:wait_panel_status] Wait complete
>[  818.331993] [drm:intel_disable_pipe] disabling pipe A
>[  818.336676] [drm:intel_dp_link_down] 
>[  818.390634] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  818.390665] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  818.403757] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  818.403784] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  818.403805] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  818.403820] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  818.403833] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  818.403847] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  818.403861] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  818.403875] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  818.403889] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  818.403914] [drm:intel_power_well_disable] disabling dpio-common
>[  818.413498] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  818.423243] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  818.429426] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  818.440781] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  818.450080] [drm:intel_power_well_disable] disabling display
>[  818.459847] [drm:verify_crtc_state] [CRTC:26]
>[  818.459877] [drm:intel_power_well_disable] disabling always-on
>[  818.465353] pm_rpm: exiting, ret=0
>[  818.465876] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  818.465883] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  818.465896] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  818.465906] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  818.465911] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  818.465919] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  818.465929] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880178d33800 for pipe A
>[  818.465934] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  818.465938] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  818.465946] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  818.465955] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  818.465962] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  818.465967] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  818.465970] [drm:intel_dump_pipe_config] requested mode:
>[  818.465983] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  818.465986] [drm:intel_dump_pipe_config] adjusted mode:
>[  818.465998] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  818.466008] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  818.466012] [drm:intel_dump_pipe_config] port clock: 270000
>[  818.466017] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  818.466022] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  818.466028] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  818.466034] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  818.466037] [drm:intel_dump_pipe_config] ips: 0
>[  818.466041] [drm:intel_dump_pipe_config] double wide: 0
>[  818.466048] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  818.466051] [drm:intel_dump_pipe_config] planes on this crtc
>[  818.466059] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  818.466066] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  818.466073] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  818.466079] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  818.466090] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  818.466127] [drm:intel_power_well_enable] enabling always-on
>[  818.466136] [drm:intel_power_well_enable] enabling display
>[  818.472868] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  818.473187] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  818.481662] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  818.491244] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  818.498581] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  818.508125] [drm:intel_power_well_enable] enabling dpio-common
>[  818.531663] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  818.531677] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  818.531691] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  818.531696] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  818.531705] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  818.531714] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  818.531723] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  818.531730] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  818.579408] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  818.579424] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  818.579437] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  818.579443] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  818.699184] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  818.701624] [drm:valleyview_enable_rps] GPLL enabled? yes
>[  818.701633] [drm:valleyview_enable_rps] GPU status: 0x0000c090
>[  818.701641] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192)
>[  818.701646] [drm:valleyview_enable_rps] setting GPU freq to 200 MHz (192)
>[  818.895073] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  818.976883] [drm:wait_panel_status] Wait complete
>[  818.976898] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  818.976904] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  819.179364] [drm:edp_panel_on] Turn eDP port B panel power on
>[  819.179373] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  819.179386] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  819.179391] [drm:wait_panel_status] Wait complete
>[  819.179397] [drm:wait_panel_on] Wait for panel power on
>[  819.179405] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  819.342731] [drm:wait_panel_status] Wait complete
>[  819.342742] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  819.342755] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  819.342776] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  819.342786] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  819.361331] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  819.361337] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  819.362932] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  819.364801] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  819.365399] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  819.365416] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  819.365421] [drm:intel_enable_pipe] enabling pipe A
>[  819.365443] [drm:intel_edp_backlight_on] 
>[  819.365448] [drm:intel_panel_enable_backlight] pipe A
>[  819.365455] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  819.365470] [drm:intel_psr_enable] PSR not supported by this panel
>[  819.382387] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  819.382405] [drm:verify_crtc_state] [CRTC:26]
>[  822.370239] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  822.370266] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  823.510514] pm_rpm: executing
>[  823.510738] [drm:i915_gem_open] 
>[  823.513888] [drm:i915_gem_open] 
>[  823.514267] [drm:drm_mode_addfb2] [FB:50]
>[  824.553750] pm_rpm: starting subtest basic-rte
>[  824.553902] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  824.553972] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  824.554017] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  824.554370] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  824.554394] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  824.554408] [drm:intel_edp_backlight_off] 
>[  824.756952] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  824.757472] [drm:edp_panel_off] Turn eDP port B panel power off
>[  824.757490] [drm:wait_panel_off] Wait for panel power off time
>[  824.757507] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  824.813749] [drm:wait_panel_status] Wait complete
>[  824.813792] [drm:intel_disable_pipe] disabling pipe A
>[  824.821266] [drm:intel_dp_link_down] 
>[  824.877098] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  824.877130] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  824.890979] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  824.891007] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  824.891028] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  824.891043] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  824.891058] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  824.891071] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  824.891085] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  824.891100] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  824.891113] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  824.891139] [drm:intel_power_well_disable] disabling dpio-common
>[  824.901129] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  824.910352] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  824.920223] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  824.930034] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  824.939601] [drm:intel_power_well_disable] disabling display
>[  824.948519] [drm:verify_crtc_state] [CRTC:26]
>[  824.948550] [drm:intel_power_well_disable] disabling always-on
>[  824.948600] [drm:intel_runtime_suspend] Suspending device
>[  824.948815] [drm:drm_mode_setcrtc] [CRTC:31:crtc-1]
>[  824.950915] [drm:intel_runtime_suspend] Device suspended
>[  825.049384] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[  825.049421] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1]
>[  825.049490] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  825.049504] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  825.049523] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  825.049539] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  825.049550] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  825.049564] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  825.049580] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880178d31800 for pipe A
>[  825.049688] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  825.049699] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  825.049713] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  825.049728] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  825.049742] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  825.049752] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  825.049761] [drm:intel_dump_pipe_config] requested mode:
>[  825.049780] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  825.049790] [drm:intel_dump_pipe_config] adjusted mode:
>[  825.049807] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  825.049823] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  825.049834] [drm:intel_dump_pipe_config] port clock: 270000
>[  825.049844] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  825.049855] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  825.049867] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  825.049878] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  825.049888] [drm:intel_dump_pipe_config] ips: 0
>[  825.049897] [drm:intel_dump_pipe_config] double wide: 0
>[  825.049909] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  825.049919] [drm:intel_dump_pipe_config] planes on this crtc
>[  825.049932] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  825.049945] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  825.049958] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  825.049971] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  825.049996] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  825.065437] [drm:intel_runtime_resume] Resuming device
>[  825.068062] [drm:intel_runtime_resume] Device resumed
>[  825.068278] [drm:intel_power_well_enable] enabling always-on
>[  825.068297] [drm:intel_power_well_enable] enabling display
>[  825.078094] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  825.078429] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  825.087922] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  825.094565] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  825.101953] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  825.111802] [drm:intel_power_well_enable] enabling dpio-common
>[  825.135403] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  825.135431] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  825.135452] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  825.135463] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  825.135478] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  825.135492] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  825.135507] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  825.135521] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  825.183592] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  825.183622] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  825.183643] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  825.183654] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  825.361547] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  825.574658] [drm:wait_panel_status] Wait complete
>[  825.574687] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  825.574699] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  825.732002] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  825.732048] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  825.732096] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  825.732139] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  825.732180] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  825.732222] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  825.778002] [drm:edp_panel_on] Turn eDP port B panel power on
>[  825.778025] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  825.778044] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  825.778054] [drm:wait_panel_status] Wait complete
>[  825.778066] [drm:wait_panel_on] Wait for panel power on
>[  825.778080] [drm:wait_panel_status] mask b000000f value 80000008 status 9000000a control abcd000b
>[  825.941599] [drm:wait_panel_status] Wait complete
>[  825.941625] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  825.941643] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  825.941670] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  825.941789] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  825.960288] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  825.960308] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  825.962220] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  825.964082] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  825.964680] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  825.964707] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  825.964718] [drm:intel_enable_pipe] enabling pipe A
>[  825.964745] [drm:intel_edp_backlight_on] 
>[  825.964757] [drm:intel_panel_enable_backlight] pipe A
>[  825.964769] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  825.964789] [drm:intel_psr_enable] PSR not supported by this panel
>[  825.981589] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  825.981615] [drm:verify_crtc_state] [CRTC:26]
>[  825.985067] [drm:intel_modeset_checks] New cdclk calculated to be atomic 200000, actual 200000
>[  825.985116] [drm:intel_set_memory_cxsr] memory self-refresh is disabled
>[  825.998601] [drm:intel_edp_backlight_off] 
>[  826.202483] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[  826.202990] [drm:edp_panel_off] Turn eDP port B panel power off
>[  826.203008] [drm:wait_panel_off] Wait for panel power off time
>[  826.203024] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[  826.259336] [drm:wait_panel_status] Wait complete
>[  826.259380] [drm:intel_disable_pipe] disabling pipe A
>[  826.266383] [drm:intel_dp_link_down] 
>[  826.322578] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  826.322610] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=0, cursor=0, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  826.336068] [drm:intel_update_cdclk] Current CD clock rate: 200000 kHz
>[  826.336096] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  826.336117] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  826.336132] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  826.336146] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  826.336160] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  826.336174] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  826.336188] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  826.336201] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  826.336227] [drm:intel_power_well_disable] disabling dpio-common
>[  826.345539] [drm:intel_power_well_disable] disabling dpio-tx-c-23
>[  826.355290] [drm:intel_power_well_disable] disabling dpio-tx-c-01
>[  826.365168] [drm:intel_power_well_disable] disabling dpio-tx-b-23
>[  826.371504] [drm:intel_power_well_disable] disabling dpio-tx-b-01
>[  826.381234] [drm:intel_power_well_disable] disabling display
>[  826.387271] [drm:verify_crtc_state] [CRTC:26]
>[  826.387301] [drm:intel_power_well_disable] disabling always-on
>[  826.392536] pm_rpm: exiting, ret=0
>[  826.392939] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[  826.392946] [drm:connected_sink_compute_bpp] clamping display bpp (was 30) to default limit of 18
>[  826.392959] [drm:intel_dp_compute_config] DP link computation with max lane count 1 max bw 270000 pixel clock 72330KHz
>[  826.392969] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 1 clock 270000 bpp 18
>[  826.392974] [drm:intel_dp_compute_config] DP link bw required 130194 available 216000
>[  826.392982] [drm:intel_modeset_pipe_config] hw max bpp: 30, pipe bpp: 18, dithering: 1
>[  826.392993] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880178d34000 for pipe A
>[  826.392997] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[  826.393001] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[  826.393009] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  826.393018] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m: 2528116, gmch_n: 4194304, link_m: 140450, link_n: 524288, tu: 64
>[  826.393026] [drm:intel_dump_pipe_config] dp: 1, lanes: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[  826.393030] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[  826.393034] [drm:intel_dump_pipe_config] requested mode:
>[  826.393047] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  826.393051] [drm:intel_dump_pipe_config] adjusted mode:
>[  826.393062] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 72330 1366 1414 1446 1526 768 770 775 790 0x48 0xa
>[  826.393072] [drm:intel_dump_crtc_timings] crtc timings: 72330 1366 1414 1446 1526 768 770 775 790, type: 0x48 flags: 0xa
>[  826.393076] [drm:intel_dump_pipe_config] port clock: 270000
>[  826.393081] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[  826.393086] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[  826.393092] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  826.393098] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  826.393102] [drm:intel_dump_pipe_config] ips: 0
>[  826.393105] [drm:intel_dump_pipe_config] double wide: 0
>[  826.393112] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[  826.393116] [drm:intel_dump_pipe_config] planes on this crtc
>[  826.393123] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[  826.393130] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[  826.393137] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[  826.393144] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = 0
>[  826.393154] [drm:intel_modeset_checks] New cdclk calculated to be atomic 266667, actual 266667
>[  826.393191] [drm:intel_power_well_enable] enabling always-on
>[  826.393200] [drm:intel_power_well_enable] enabling display
>[  826.400829] [drm:i915_redisable_vga_power_on] Something enabled VGA plane, disabling it
>[  826.401148] [drm:intel_power_well_enable] enabling dpio-tx-b-01
>[  826.409844] [drm:intel_power_well_enable] enabling dpio-tx-b-23
>[  826.419650] [drm:intel_power_well_enable] enabling dpio-tx-c-01
>[  826.429278] [drm:intel_power_well_enable] enabling dpio-tx-c-23
>[  826.436741] [drm:intel_power_well_enable] enabling dpio-common
>[  826.461176] [drm:intel_update_cdclk] Current CD clock rate: 266667 kHz
>[  826.461191] [drm:verify_encoder_state] [ENCODER:35:DAC-35]
>[  826.461205] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[  826.461210] [drm:verify_encoder_state] [ENCODER:44:TMDS-44]
>[  826.461218] [drm:verify_encoder_state] [ENCODER:47:TMDS-47]
>[  826.461228] [drm:intel_connector_verify_state] [CONNECTOR:34:VGA-1]
>[  826.461237] [drm:intel_connector_verify_state] [CONNECTOR:45:HDMI-A-1]
>[  826.461244] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-1]
>[  826.509868] [drm:vlv_init_panel_power_sequencer] initializing pipe A power sequencer for port B
>[  826.509884] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x47d00001, PP_OFF 0x1f40001, PP_DIV 0x270f06
>[  826.509897] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  826.509902] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  826.695159] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[  826.697598] [drm:valleyview_enable_rps] GPLL enabled? yes
>[  826.697606] [drm:valleyview_enable_rps] GPU status: 0x0000c090
>[  826.697614] [drm:valleyview_enable_rps] current GPU freq: 200 MHz (192)
>[  826.697619] [drm:valleyview_enable_rps] setting GPU freq to 200 MHz (192)
>[  826.806951] [drm:wait_panel_status] mask b800000f value 00000000 status 08000001 control 00000000
>[  826.909235] [drm:wait_panel_status] Wait complete
>[  826.909251] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  826.909256] [drm:edp_panel_vdd_on] eDP port B panel power wasn't enabled
>[  827.111074] [drm:edp_panel_on] Turn eDP port B panel power on
>[  827.111082] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[  827.111095] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[  827.111100] [drm:wait_panel_status] Wait complete
>[  827.111106] [drm:wait_panel_on] Wait for panel power on
>[  827.111115] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[  827.274667] [drm:wait_panel_status] Wait complete
>[  827.274678] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  827.274691] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  827.274713] [drm:edp_panel_vdd_on] Turning eDP port B VDD on
>[  827.274723] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  827.292966] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[  827.292972] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[  827.294568] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[  827.296489] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[  827.297081] [drm:vlv_pipe_set_fifo_size] Pipe A FIFO split 511 / 511 / 511
>[  827.297098] [drm:vlv_update_wm] Setting FIFO watermarks - A: plane=425, cursor=63, sprite0=0, sprite1=0, SR: plane=0, cursor=0 level=0 cxsr=0
>[  827.297103] [drm:intel_enable_pipe] enabling pipe A
>[  827.297125] [drm:intel_edp_backlight_on] 
>[  827.297130] [drm:intel_panel_enable_backlight] pipe A
>[  827.297137] [drm:intel_panel_actually_set_backlight] set backlight PWM = 7812
>[  827.297152] [drm:intel_psr_enable] PSR not supported by this panel
>[  827.314063] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[  827.314078] [drm:verify_crtc_state] [CRTC:26]
>[  830.306382] [drm:edp_panel_vdd_off_sync] Turning eDP port B VDD off
>[  830.306411] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  834.848954] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  834.848999] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  834.849047] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  834.849090] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  834.849131] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  834.849172] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  843.970642] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  843.970687] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  843.970736] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  843.970779] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  843.970820] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  843.970861] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  853.086981] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  853.087027] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  853.087076] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  853.087119] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  853.087159] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  853.087201] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  862.207997] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  862.208043] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  862.208090] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  862.208133] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  862.208173] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  862.208216] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  871.329846] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  871.329891] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  871.329940] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  871.329983] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  871.330023] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  871.330065] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  880.450306] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  880.450352] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  880.450400] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  880.450443] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  880.450484] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  880.450526] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  889.568317] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  889.568362] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  889.568411] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  889.568454] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  889.568496] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  889.568539] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  898.689382] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  898.689428] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  898.689477] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  898.689520] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  898.689562] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  898.689605] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  907.810103] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  907.810151] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  907.810199] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  907.810242] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  907.810283] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  907.810325] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  916.930956] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  916.931005] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  916.931053] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  916.931096] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  916.931137] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  916.931180] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  926.052195] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  926.052240] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  926.052289] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  926.052332] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  926.052374] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  926.052416] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  935.173253] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  935.173299] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  935.173347] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  935.173389] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  935.173429] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  935.173471] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)
>[  944.294208] ACPI Error: [\_TZ_.THRM] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
>[  944.294254] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LGPA] (Node ffff88017b0ec140), AE_NOT_FOUND (20160108/psparse-542)
>[  944.294302] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.LEVN] (Node ffff88017b0ed7a8), AE_NOT_FOUND (20160108/psparse-542)
>[  944.294344] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECLV] (Node ffff88017b0ed708), AE_NOT_FOUND (20160108/psparse-542)
>[  944.294385] ACPI Error: Method parse/execution failed [\_GPE._L10] (Node ffff88017b0ed7d0), AE_NOT_FOUND (20160108/psparse-542)
>[  944.294427] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L10] (20160108/evgpe-592)

Actions: View

Attachments on bug 93297: 123734

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.