Attachment 123863 Details for Bug 95469 – dmesg.log

dmesg.log

dmesg.log (text/plain), 128.27 KB, created by Humberto Israel Perez Rodriguez on 2016-05-18 02:10:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Humberto Israel Perez Rodriguez

Created: 2016-05-18 02:10:00 UTC

Size: 128.27 KB

patch

obsolete

>[    0.000000] Linux version 4.6.0-drm-intel-nightly-ww21-commit-c5034bf+ (gfx@GM-GFX-QA02) (gcc version 4.9.3 (Ubuntu 4.9.3-8ubuntu2~14.04) ) #1 SMP Tue May 17 16:41:30 CDT 2016
>[    0.000000] Command line: vmlinuz root=/dev/sda2 initrd=initrd.img processor.max_cstate=2 log_buf_len=4M i915.preliminary_hw_support=1 drm.debug=14
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   Centaur CentaurHauls
>[    0.000000] x86/fpu: xstate_offset[3]:  960, xstate_sizes[3]:   64
>[    0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]:   64
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
>[    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 1088 bytes, using 'standard' format.
>[    0.000000] x86/fpu: Using 'eager' FPU context switches.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000effffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000f000000-0x0000000012151fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000012152000-0x0000000078223fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000078224000-0x0000000079fd3fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000079fd4000-0x000000007a033fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007a034000-0x000000007a070fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000007a071000-0x000000007a2a8fff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007a2a9000-0x000000007a2a9fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007a2aa000-0x000000007a2d3fff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000007a2d4000-0x000000007affffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e006a000-0x00000000e006afff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] efi: EFI v2.50 by EDK II
>[    0.000000] efi:  ACPI=0x7a070000  ACPI 2.0=0x7a070014  ESRT=0x79fa3000  SMBIOS=0x7841b000  SMBIOS 3.0=0x78419000  PROP=0x7a295dc0 
>[    0.000000] efi: requested map not found.
>[    0.000000] esrt: ESRT header is not in the memory map.
>[    0.000000] SMBIOS 3.0.0 present.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
>[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
>[    0.000000]   2 base 007B000000 mask 7FFF000000 uncachable
>[    0.000000]   3 base 0100000000 mask 7F00000000 write-back
>[    0.000000]   4 base 0200000000 mask 7F80000000 write-back
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
>[    0.000000] total RAM covered: 8112M
>[    0.000000] Found optimal setting for mtrr clean up
>[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 5  	lose cover RAM: 0G
>[    0.000000] e820: update [mem 0x7b000000-0xffffffff] usable ==> reserved
>[    0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0x0201b000, 0x0201bfff] PGTABLE
>[    0.000000] BRK [0x0201c000, 0x0201cfff] PGTABLE
>[    0.000000] BRK [0x0201d000, 0x0201dfff] PGTABLE
>[    0.000000] BRK [0x0201e000, 0x0201efff] PGTABLE
>[    0.000000] BRK [0x0201f000, 0x0201ffff] PGTABLE
>[    0.000000] BRK [0x02020000, 0x02020fff] PGTABLE
>[    0.000000] log_buf_len: 4194304 bytes
>[    0.000000] early log buf free: 257324(98%)
>[    0.000000] RAMDISK: [mem 0x73031000-0x74e0afff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x000000007A070014 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 0x000000007A047188 000104 (v01 INTEL  EDK2     00000003 BRXT 01000013)
>[    0.000000] ACPI: FACP 0x000000007A068000 00010C (v05 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20160108/tbfadt-623)
>[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20160108/tbfadt-704)
>[    0.000000] ACPI: DSDT 0x000000007A05A000 0088DD (v02 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: FACS 0x000000007A022000 000040
>[    0.000000] ACPI: SSDT 0x000000007A06E000 0003C6 (v02 INTEL  Tpm2Tabl 00001000 INTL 20150818)
>[    0.000000] ACPI: TPM2 0x000000007A06D000 000034 (v03                 00000000      00000000)
>[    0.000000] ACPI: UEFI 0x000000007A02A000 000042 (v01 INTEL  EDK2     00000002 BRXT 01000013)
>[    0.000000] ACPI: BDAT 0x000000007A06C000 000030 (v02                 00000000      00000000)
>[    0.000000] ACPI: OEM0 0x000000007A06B000 000084 (v05 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: DBG2 0x000000007A06A000 000072 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: DMAR 0x000000007A069000 0000B0 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: HPET 0x000000007A067000 000038 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: LPIT 0x000000007A066000 00005C (v01 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: APIC 0x000000007A065000 000084 (v03 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: MCFG 0x000000007A064000 00003C (v01 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: NPKT 0x000000007A063000 000065 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: SSDT 0x000000007A04F000 005023 (v02 INTEL  RVPRtd3  00000003 BRXT 0100000D)
>[    0.000000] ACPI: SSDT 0x000000007A04E000 000B53 (v02 INTEL  UsbCTabl 00000003 BRXT 0100000D)
>[    0.000000] ACPI: SSDT 0x000000007A04C000 0016EF (v01 Intel_ Platform 00001000 INTL 20150818)
>[    0.000000] ACPI: EM_1 0x000000007A04A000 000029 (v00 INTEL  OEM1     00000005 INTL 0100000D)
>[    0.000000] ACPI: OEM1 0x000000007A049000 000040 (v01 INTEL  ENRGYMGT 00000005 INTL 0100000D)
>[    0.000000] ACPI: PIDV 0x000000007A048000 0000DC (v02                 00000002 BRXT 0100000D)
>[    0.000000] ACPI: RSCI 0x000000007A06F000 000030 (v02 INTEL  BOOTSRC  00000001 BRXT 0100000D)
>[    0.000000] ACPI: SSDT 0x000000007A04B000 0004E0 (v02 PmRef  Cpu0Ist  00003000 INTL 20150818)
>[    0.000000] ACPI: SSDT 0x000000007A046000 000729 (v02 CpuRef CpuSsdt  00003000 INTL 20150818)
>[    0.000000] ACPI: SSDT 0x000000007A045000 000343 (v02 PmRef  Cpu0Tst  00003000 INTL 20150818)
>[    0.000000] ACPI: SSDT 0x000000007A044000 00017C (v02 PmRef  ApTst    00003000 INTL 20150818)
>[    0.000000] ACPI: SSDT 0x000000007A041000 0027A7 (v02 SaSsdt SaSsdt   00003000 INTL 20150818)
>[    0.000000] ACPI: FPDT 0x000000007A040000 000044 (v01 INTEL  EDK2     00000002 BRXT 01000013)
>[    0.000000] ACPI: WDAT 0x000000007A059000 000104 (v01                 00000000      00000000)
>[    0.000000] ACPI: NHLT 0x000000007A057000 001A50 (v00 INTEL  EDK2     00000002 BRXT 01000013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x27fbfa000-0x27fbfdfff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027fffffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
>[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009dfff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000effffff]
>[    0.000000]   node   0: [mem 0x0000000012152000-0x0000000078223fff]
>[    0.000000]   node   0: [mem 0x000000007a071000-0x000000007a2a8fff]
>[    0.000000]   node   0: [mem 0x000000007a2d4000-0x000000007affffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027fffffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
>[    0.000000] On node 0 totalpages: 2056146
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 7489 pages used for memmap
>[    0.000000]   DMA32 zone: 479286 pages, LIFO batch:31
>[    0.000000]   Normal zone: 24576 pages used for memmap
>[    0.000000]   Normal zone: 1572864 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0f000000-0x12151fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x78224000-0x79fd3fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x79fd4000-0x7a033fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7a034000-0x7a070fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7a2a9000-0x7a2a9fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7a2aa000-0x7a2d3fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xe0069fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe006a000-0xe006afff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe006b000-0xfed00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffffffff]
>[    0.000000] e820: [mem 0x80000000-0xe0069fff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] percpu: Embedded 34 pages/cpu @ffff88027f800000 s99032 r8192 d32040 u524288
>[    0.000000] pcpu-alloc: s99032 r8192 d32040 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2023996
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: vmlinuz root=/dev/sda2 initrd=initrd.img processor.max_cstate=2 log_buf_len=4M i915.preliminary_hw_support=1 drm.debug=14
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] ------------[ cut here ]------------
>[    0.000000] WARNING: CPU: 0 PID: 0 at drivers/iommu/dmar.c:830 warn_invalid_dmar.part.7+0x78/0x90
>[    0.000000] Your BIOS is broken; DMAR reported at address 0!
>               BIOS vendor: Intel Corp.; Ver: APLKRVPA.X64.0129.B10.1603140006; Product Version: A0
>[    0.000000] Modules linked in:
>[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-drm-intel-nightly-ww21-commit-c5034bf+ #1
>[    0.000000] Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLKRVPA.X64.0129.B10.1603140006 03/14/2016
>[    0.000000]  0000000000000000 ffffffff81c03d58 ffffffff813c7963 ffffffff81c03da8
>[    0.000000]  0000000000000000 ffffffff81c03d98 ffffffff8107d571 0000033e81da5069
>[    0.000000]  0000000000000000 ffffffff81a8a202 ffffffff8201a00c ffffffff8201a424
>[    0.000000] Call Trace:
>[    0.000000]  [<ffffffff813c7963>] dump_stack+0x63/0x90
>[    0.000000]  [<ffffffff8107d571>] __warn+0xd1/0xf0
>[    0.000000]  [<ffffffff8107d637>] warn_slowpath_fmt_taint+0x47/0x50
>[    0.000000]  [<ffffffff81da52a8>] ? early_ioremap+0x13/0x15
>[    0.000000]  [<ffffffff81d84706>] ? __acpi_map_table+0x13/0x18
>[    0.000000]  [<ffffffff8150ad58>] warn_invalid_dmar.part.7+0x78/0x90
>[    0.000000]  [<ffffffff817e75d0>] dmar_validate_one_drhd+0xa0/0xe0
>[    0.000000]  [<ffffffff8150a743>] dmar_walk_remapping_entries+0x83/0x1a0
>[    0.000000]  [<ffffffff81dc1dfd>] detect_intel_iommu+0x52/0xd1
>[    0.000000]  [<ffffffff817e7530>] ? xen_swiotlb_init+0x490/0x490
>[    0.000000]  [<ffffffff81d7f085>] pci_iommu_alloc+0x4a/0x6c
>[    0.000000]  [<ffffffff81d8ded4>] mem_init+0x17/0x9d
>[    0.000000]  [<ffffffff81d6fd7b>] start_kernel+0x21e/0x45e
>[    0.000000]  [<ffffffff81d6f120>] ? early_idt_handler_array+0x120/0x120
>[    0.000000]  [<ffffffff81d6f4ec>] x86_64_start_reservations+0x2a/0x2c
>[    0.000000]  [<ffffffff81d6f629>] x86_64_start_kernel+0x13b/0x14a
>[    0.000000] ---[ end trace 12a08003fb7f5a9a ]---
>[    0.000000] Memory: 7934504K/8224584K available (8148K kernel code, 1363K rwdata, 3688K rodata, 1504K init, 1292K bss, 290080K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
>[    0.000000] NR_IRQS:16640 nr_irqs:1024 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 4835.666 MHz processor
>[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 9671.33 BogoMIPS (lpj=19342664)
>[    0.000034] pid_max: default: 32768 minimum: 301
>[    0.000039] ACPI: Core revision 20160108
>[    0.009875] ACPI: 10 ACPI AML tables successfully acquired and loaded
>
>[    0.010204] Security Framework initialized
>[    0.010208] Yama: becoming mindful.
>[    0.010213] AppArmor: AppArmor initialized
>[    0.010500] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.011597] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.012084] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.012092] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.012254] CPU: Physical Processor ID: 0
>[    0.012258] CPU: Processor Core ID: 0
>[    0.012266] mce: CPU supports 7 MCE banks
>[    0.012284] CPU0: Thermal monitoring enabled (TM1)
>[    0.012298] process: using mwait in idle threads
>[    0.012301] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
>[    0.012303] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
>[    0.012980] Freeing SMP alternatives memory: 32K (ffffffff81ece000 - ffffffff81ed6000)
>[    0.017272] ftrace: allocating 31993 entries in 125 pages
>[    0.036164] smpboot: Max logical packages: 1
>[    0.036168] smpboot: APIC(0) Converting physical 0 to logical package 0
>[    0.036176] DMAR: Host address width 39
>[    0.036178] DMAR: DRHD base: 0x00000000000000 flags: 0x0
>[    0.036181] DMAR: Parse DMAR table failure.
>[    0.036508] x2apic: IRQ remapping doesn't support X2APIC mode
>[    0.037821] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.077509] TSC deadline timer enabled
>[    0.077512] smpboot: CPU0: Intel 06/5c (family: 0x6, model: 0x5c, stepping: 0x8)
>[    0.077525] Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
>[    0.077531] ... version:                4
>[    0.077533] ... bit width:              48
>[    0.077534] ... generic registers:      4
>[    0.077536] ... value mask:             0000ffffffffffff
>[    0.077537] ... max period:             0000ffffffffffff
>[    0.077539] ... fixed-purpose events:   3
>[    0.077541] ... event mask:             000000070000000f
>[    0.077964] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.078042] x86: Booting SMP configuration:
>[    0.078045] .... node  #0, CPUs:      #1 #2 #3
>[    0.319630] x86: Booted up 1 node, 4 CPUs
>[    0.319634] smpboot: Total of 4 processors activated (38692.93 BogoMIPS)
>[    0.320503] devtmpfs: initialized
>[    0.320544] x86/mm: Memory block size: 128MB
>[    0.322261] evm: security.selinux
>[    0.322263] evm: security.SMACK64
>[    0.322265] evm: security.SMACK64EXEC
>[    0.322266] evm: security.SMACK64TRANSMUTE
>[    0.322268] evm: security.SMACK64MMAP
>[    0.322270] evm: security.ima
>[    0.322271] evm: security.capability
>[    0.322319] PM: Registering ACPI NVS region [mem 0x79fd4000-0x7a033fff] (393216 bytes)
>[    0.322326] PM: Registering ACPI NVS region [mem 0x7a2a9000-0x7a2a9fff] (4096 bytes)
>[    0.322370] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.322415] pinctrl core: initialized pinctrl subsystem
>[    0.322502] RTC time:  2:03:00, date: 05/18/16
>[    0.323524] NET: Registered protocol family 16
>[    0.333595] cpuidle: using governor ladder
>[    0.345601] cpuidle: using governor menu
>[    0.345612] PCCT header not found.
>[    0.345681] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.345684] ACPI: bus type PCI registered
>[    0.345686] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.345732] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
>[    0.345736] PCI: not using MMCONFIG
>[    0.345738] PCI: Using configuration type 1 for base access
>[    0.357732] HugeTLB registered 1 GB page size, pre-allocated 0 pages
>[    0.357736] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.357929] ACPI: Added _OSI(Module Device)
>[    0.357932] ACPI: Added _OSI(Processor Device)
>[    0.357934] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.357936] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.358159] ACPI: Executed 5 blocks of module-level executable AML code
>[    0.361696] ACPI: Dynamic OEM Table Load:
>[    0.361704] ACPI: SSDT 0xFFFF880275819B40 000099 (v02 PmRef  Cpu0Cst  00003001 INTL 20150818)
>[    0.362156] ACPI: Dynamic OEM Table Load:
>[    0.362163] ACPI: SSDT 0xFFFF880275909200 00015F (v02 PmRef  ApIst    00003000 INTL 20150818)
>[    0.362540] ACPI: Dynamic OEM Table Load:
>[    0.362546] ACPI: SSDT 0xFFFF880275819C00 00008D (v02 PmRef  ApCst    00003000 INTL 20150818)
>[    0.363278] ACPI : EC: EC started
>[    0.527756] ACPI: Interpreter enabled
>[    0.527771] ACPI: (supports S0 S3 S4 S5)
>[    0.527774] ACPI: Using IOAPIC for interrupt routing
>[    0.527794] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
>[    0.528070] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
>[    0.528077] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.528948] ACPI: Power Resource [PXP] (off)
>[    0.529215] ACPI: Power Resource [PXP] (on)
>[    0.647991] ACPI: Power Resource [PXP] (on)
>[    0.667960] ACPI: Power Resource [PXP] (off)
>[    0.668184] ACPI: Power Resource [PXP] (off)
>[    0.668411] ACPI: Power Resource [PXP] (off)
>[    0.668688] ACPI: Power Resource [SPPR] (on)
>[    0.687854] ACPI: Power Resource [ODPR] (on)
>[    0.687947] ACPI: Power Resource [SPPR] (on)
>[    0.707863] ACPI: Power Resource [ODPR] (on)
>[    0.708001] ACPI: Power Resource [UPPR] (on)
>[    0.708149] ACPI: Power Resource [UPPR] (on)
>[    0.708298] ACPI: Power Resource [UPPR] (on)
>[    0.708446] ACPI: Power Resource [UPPR] (on)
>[    0.708592] ACPI: Power Resource [UPPR] (on)
>[    0.708743] ACPI: Power Resource [UPPR] (on)
>[    0.708896] ACPI: Power Resource [UPPR] (on)
>[    0.709046] ACPI: Power Resource [UPPR] (on)
>[    0.709201] ACPI: Power Resource [UPPR] (on)
>[    0.709352] ACPI: Power Resource [UPPR] (on)
>[    0.709504] ACPI: Power Resource [UPPR] (on)
>[    0.709652] ACPI: Power Resource [UPPR] (on)
>[    0.709797] ACPI: Power Resource [UPPR] (on)
>[    0.709945] ACPI: Power Resource [UPPR] (on)
>[    0.710093] ACPI: Power Resource [UPPR] (on)
>[    0.710214] ACPI: Power Resource [USBC] (on)
>[    0.710280] ACPI: Power Resource [SDPR] (on)
>[    0.727968] ACPI: Power Resource [LSPR] (on)
>[    0.729325] ACPI: Power Resource [PAUD] (on)
>[    0.731006] ACPI: Power Resource [FN00] (on)
>[    0.828073] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.828078] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.828449] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.828452] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
>[    0.828462] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>[    0.828767] PCI host bridge to bus 0000:00
>[    0.828770] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
>[    0.828773] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
>[    0.828775] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
>[    0.828777] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.828779] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.828782] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
>[    0.828785] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
>[    0.828788] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
>[    0.828791] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
>[    0.828795] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.828802] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
>[    0.828943] pci 0000:00:02.0: [8086:5a84] type 00 class 0x030000
>[    0.828949] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
>[    0.828953] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
>[    0.828955] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
>[    0.829086] pci 0000:00:03.0: [8086:5a88] type 00 class 0x048000
>[    0.829091] pci 0000:00:03.0: reg 0x10: [mem 0x91000000-0x91ffffff 64bit]
>[    0.829224] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040300
>[    0.829232] pci 0000:00:0e.0: reg 0x10: [mem 0x92418000-0x9241bfff 64bit]
>[    0.829239] pci 0000:00:0e.0: reg 0x20: [mem 0x92200000-0x922fffff 64bit]
>[    0.829258] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
>[    0.829379] pci 0000:00:0e.0: System wakeup disabled by ACPI
>[    0.829406] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
>[    0.829417] pci 0000:00:0f.0: reg 0x10: [mem 0x92420000-0x92420fff 64bit]
>[    0.829456] pci 0000:00:0f.0: PME# supported from D3hot
>[    0.829573] pci 0000:00:11.0: [8086:5aa2] type 00 class 0x005007
>[    0.829583] pci 0000:00:11.0: reg 0x10: [mem 0x9241c000-0x9241dfff 64bit]
>[    0.829590] pci 0000:00:11.0: reg 0x18: [mem 0x92423000-0x92423fff 64bit]
>[    0.829725] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
>[    0.829731] pci 0000:00:12.0: reg 0x10: [mem 0x9241e000-0x9241ffff]
>[    0.829734] pci 0000:00:12.0: reg 0x14: [mem 0x92439000-0x924390ff]
>[    0.829738] pci 0000:00:12.0: reg 0x18: [io  0x2080-0x2087]
>[    0.829741] pci 0000:00:12.0: reg 0x1c: [io  0x2088-0x208b]
>[    0.829744] pci 0000:00:12.0: reg 0x20: [io  0x2060-0x207f]
>[    0.829747] pci 0000:00:12.0: reg 0x24: [mem 0x92437000-0x924377ff]
>[    0.829762] pci 0000:00:12.0: PME# supported from D3hot
>[    0.829881] pci 0000:00:13.0: [8086:5ada] type 01 class 0x060400
>[    0.829909] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
>[    0.830032] pci 0000:00:13.0: System wakeup disabled by ACPI
>[    0.830065] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
>[    0.830072] pci 0000:00:15.0: reg 0x10: [mem 0x92400000-0x9240ffff 64bit]
>[    0.830098] pci 0000:00:15.0: PME# supported from D3hot D3cold
>[    0.830192] pci 0000:00:15.0: System wakeup disabled by ACPI
>[    0.830225] pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000
>[    0.830234] pci 0000:00:16.0: reg 0x10: [mem 0x92425000-0x92425fff 64bit]
>[    0.830367] pci 0000:00:16.1: [8086:5aae] type 00 class 0x118000
>[    0.830376] pci 0000:00:16.1: reg 0x10: [mem 0x92426000-0x92426fff 64bit]
>[    0.830508] pci 0000:00:16.2: [8086:5ab0] type 00 class 0x118000
>[    0.830516] pci 0000:00:16.2: reg 0x10: [mem 0x92427000-0x92427fff 64bit]
>[    0.830649] pci 0000:00:16.3: [8086:5ab2] type 00 class 0x118000
>[    0.830659] pci 0000:00:16.3: reg 0x10: [mem 0x92428000-0x92428fff 64bit]
>[    0.830795] pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000
>[    0.830803] pci 0000:00:17.0: reg 0x10: [mem 0x92429000-0x92429fff 64bit]
>[    0.830940] pci 0000:00:17.1: [8086:5ab6] type 00 class 0x118000
>[    0.830950] pci 0000:00:17.1: reg 0x10: [mem 0x9242a000-0x9242afff 64bit]
>[    0.831087] pci 0000:00:17.2: [8086:5ab8] type 00 class 0x118000
>[    0.831096] pci 0000:00:17.2: reg 0x10: [mem 0x9242b000-0x9242bfff 64bit]
>[    0.831230] pci 0000:00:17.3: [8086:5aba] type 00 class 0x118000
>[    0.831240] pci 0000:00:17.3: reg 0x10: [mem 0x9242c000-0x9242cfff 64bit]
>[    0.831377] pci 0000:00:18.0: [8086:5abc] type 00 class 0x118000
>[    0.831386] pci 0000:00:18.0: reg 0x10: [mem 0x9242d000-0x9242dfff 64bit]
>[    0.831520] pci 0000:00:18.1: [8086:5abe] type 00 class 0x118000
>[    0.831529] pci 0000:00:18.1: reg 0x10: [mem 0x9242e000-0x9242efff 64bit]
>[    0.831661] pci 0000:00:18.2: [8086:5ac0] type 00 class 0x118000
>[    0.831669] pci 0000:00:18.2: reg 0x10: [mem 0x9242f000-0x9242ffff 64bit]
>[    0.831804] pci 0000:00:18.3: [8086:5aee] type 00 class 0x118000
>[    0.831814] pci 0000:00:18.3: reg 0x10: [mem 0x92430000-0x92430fff 64bit]
>[    0.831956] pci 0000:00:19.0: [8086:5ac2] type 00 class 0x118000
>[    0.831964] pci 0000:00:19.0: reg 0x10: [mem 0x92431000-0x92431fff 64bit]
>[    0.832099] pci 0000:00:19.1: [8086:5ac4] type 00 class 0x118000
>[    0.832108] pci 0000:00:19.1: reg 0x10: [mem 0x92432000-0x92432fff 64bit]
>[    0.832240] pci 0000:00:19.2: [8086:5ac6] type 00 class 0x118000
>[    0.832248] pci 0000:00:19.2: reg 0x10: [mem 0x92433000-0x92433fff 64bit]
>[    0.832391] pci 0000:00:1b.0: [8086:5aca] type 00 class 0x080501
>[    0.832398] pci 0000:00:1b.0: reg 0x10: [mem 0x92434000-0x92434fff 64bit]
>[    0.832537] pci 0000:00:1c.0: [8086:5acc] type 00 class 0x080501
>[    0.832544] pci 0000:00:1c.0: reg 0x10: [mem 0x92435000-0x92435fff 64bit]
>[    0.832685] pci 0000:00:1e.0: [8086:5ad0] type 00 class 0x080501
>[    0.832693] pci 0000:00:1e.0: reg 0x10: [mem 0x92436000-0x92436fff 64bit]
>[    0.832824] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
>[    0.832982] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
>[    0.832996] pci 0000:00:1f.1: reg 0x10: [mem 0x92438000-0x924380ff 64bit]
>[    0.833017] pci 0000:00:1f.1: reg 0x20: [io  0x2040-0x205f]
>[    0.833185] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000
>[    0.833198] pci 0000:01:00.0: reg 0x10: [mem 0x92300000-0x9231ffff]
>[    0.833209] pci 0000:01:00.0: reg 0x18: [io  0x1000-0x101f]
>[    0.833213] pci 0000:01:00.0: reg 0x1c: [mem 0x92320000-0x92323fff]
>[    0.833260] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>[    0.833281] pci 0000:01:00.0: System wakeup disabled by ACPI
>[    0.839863] pci 0000:00:13.0: PCI bridge to [bus 01]
>[    0.839867] pci 0000:00:13.0:   bridge window [io  0x1000-0x1fff]
>[    0.839868] pci 0000:00:13.0:   bridge window [mem 0x92300000-0x923fffff]
>[    0.841353] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    0.841392] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    0.841430] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    0.841468] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    0.841505] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    0.841541] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    0.841578] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    0.841614] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    0.842165] ACPI: Enabled 2 GPEs in block 00 to 7F
>[    0.842206] ACPI : EC: GPE = 0x2b, I/O: command/status = 0x66, data = 0x62
>[    0.842297] vgaarb: setting as boot device: PCI:0000:00:02.0
>[    0.842300] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.842306] vgaarb: loaded
>[    0.842307] vgaarb: bridge control possible 0000:00:02.0
>[    0.842441] SCSI subsystem initialized
>[    0.842471] libata version 3.00 loaded.
>[    0.842486] ACPI: bus type USB registered
>[    0.842498] usbcore: registered new interface driver usbfs
>[    0.842505] usbcore: registered new interface driver hub
>[    0.842516] usbcore: registered new device driver usb
>[    0.842630] PCI: Using ACPI for IRQ routing
>[    0.844425] PCI: pci_cache_line_size set to 64 bytes
>[    0.844482] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.844483] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
>[    0.844483] e820: reserve RAM buffer [mem 0x0f000000-0x0fffffff]
>[    0.844484] e820: reserve RAM buffer [mem 0x78224000-0x7bffffff]
>[    0.844485] e820: reserve RAM buffer [mem 0x7a2a9000-0x7bffffff]
>[    0.844486] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
>[    0.844552] NetLabel: Initializing
>[    0.844555] NetLabel:  domain hash size = 128
>[    0.844556] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.844565] NetLabel:  unlabeled traffic allowed by default
>[    0.844669] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.844676] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
>[    0.845194] clocksource: Switched to clocksource hpet
>[    0.848877] VFS: Disk quotas dquot_6.6.0
>[    0.848892] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.848947] AppArmor: AppArmor Filesystem Enabled
>[    0.848988] pnp: PnP ACPI init
>[    0.849083] system 00:00: [io  0x06a4] has been reserved
>[    0.849086] system 00:00: [io  0x06a0] has been reserved
>[    0.849090] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.849160] pnp 00:01: disabling [io  0x164e-0x164f] because it overlaps 0000:00:13.0 BAR 13 [io  0x1000-0x1fff]
>[    0.849182] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.849185] system 00:01: [io  0x0400-0x047f] has been reserved
>[    0.849187] system 00:01: [io  0x0500-0x05fe] has been reserved
>[    0.849189] system 00:01: [io  0x0600-0x061f] has been reserved
>[    0.849200] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.849223] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.849243] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
>[    0.849441] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.849444] system 00:04: [mem 0xfea00000-0xfeafffff] has been reserved
>[    0.849446] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved
>[    0.849449] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved
>[    0.849451] system 00:04: [mem 0xfed06000-0xfed06fff] has been reserved
>[    0.849453] system 00:04: [mem 0xfed08000-0xfed09fff] has been reserved
>[    0.849456] system 00:04: [mem 0xfed80000-0xfedbffff] has been reserved
>[    0.849458] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved
>[    0.849460] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.849463] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.849578] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.849657] pnp: PnP ACPI: found 6 devices
>[    0.855921] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.855938] pci 0000:00:13.0: PCI bridge to [bus 01]
>[    0.855942] pci 0000:00:13.0:   bridge window [io  0x1000-0x1fff]
>[    0.855945] pci 0000:00:13.0:   bridge window [mem 0x92300000-0x923fffff]
>[    0.855950] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
>[    0.855951] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
>[    0.855952] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
>[    0.855953] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
>[    0.855954] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
>[    0.855955] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
>[    0.855956] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
>[    0.855957] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
>[    0.855958] pci_bus 0000:00: resource 12 [mem 0x80000000-0xcfffffff window]
>[    0.855959] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
>[    0.855960] pci_bus 0000:01: resource 1 [mem 0x92300000-0x923fffff]
>[    0.855977] NET: Registered protocol family 2
>[    0.856081] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.856167] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.856245] TCP: Hash tables configured (established 65536 bind 65536)
>[    0.856269] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.856289] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.856336] NET: Registered protocol family 1
>[    0.856350] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.856504] PCI: CLS 64 bytes, default 64
>[    0.856536] Trying to unpack rootfs image as initramfs...
>[    1.142445] Freeing initrd memory: 30568K (ffff880073031000 - ffff880074e0b000)
>[    1.142454] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    1.142457] software IO TLB [mem 0x6f031000-0x73031000] (64MB) mapped at [ffff88006f031000-ffff880073030fff]
>[    1.142553] Scanning for low memory corruption every 60 seconds
>[    1.142788] futex hash table entries: 1024 (order: 4, 65536 bytes)
>[    1.142807] audit: initializing netlink subsys (disabled)
>[    1.142817] audit: type=2000 audit(1463536980.235:1): initialized
>[    1.143012] Initialise system trusted keyring
>[    1.143081] workingset: timestamp_bits=38 max_order=21 bucket_order=0
>[    1.144105] zbud: loaded
>[    1.144478] fuse init (API version 7.24)
>[    1.144574] Key type big_key registered
>[    1.144991] Key type asymmetric registered
>[    1.144994] Asymmetric key parser 'x509' registered
>[    1.145019] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
>[    1.145047] io scheduler noop registered
>[    1.145049] io scheduler deadline registered (default)
>[    1.145070] io scheduler cfq registered
>[    1.145197] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt
>[    1.145200] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
>[    1.145203] pcie_pme 0000:00:13.0:pcie01: service driver pcie_pme loaded
>[    1.145208] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    1.145213] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    1.145238] efifb: probing for efifb
>[    1.145247] efifb: framebuffer at 0x80000000, mapped to 0xffffc90001000000, using 9000k, total 9000k
>[    1.145251] efifb: mode is 1920x1200x32, linelength=7680, pages=1
>[    1.145252] efifb: scrolling: redraw
>[    1.145254] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    1.148886] Console: switching to colour frame buffer device 240x75
>[    1.152468] fb0: EFI VGA frame buffer device
>[    1.152485] intel_idle: does not run on family 6 model 92
>[    1.152543] ACPI: AC Adapter [ADP1] (off-line)
>[    1.152590] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0D:00/input/input0
>[    1.152710] ACPI: Lid Switch [LID0]
>[    1.152750] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>[    1.152772] ACPI: Power Button [PWRB]
>[    1.152806] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    1.152826] ACPI: Power Button [PWRF]
>[    1.152878] ACPI: processor limited to max C-state 2
>[    1.152912] Monitor-Mwait will be used to enter C-1 state
>[    1.152923] Monitor-Mwait will be used to enter C-2 state
>[    1.152932] Monitor-Mwait will be used to enter C-3 state
>[    1.154920] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.154939] ACPI: Thermal Zone [TZ01] (31 C)
>[    1.154970] GHES: HEST is not enabled!
>[    1.155062] ACPI: Battery Slot [BAT0] (battery present)
>[    1.155066] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>[    1.155121] ACPI: Battery Slot [BAT1] (battery absent)
>[    1.175145] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    1.176461] Linux agpgart interface v0.103
>[    1.178752] brd: module loaded
>[    1.179700] loop: module loaded
>[    1.179855] libphy: Fixed MDIO Bus: probed
>[    1.179868] tun: Universal TUN/TAP device driver, 1.6
>[    1.179881] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[    1.179935] PPP generic driver version 2.4.2
>[    1.179995] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.180016] ehci-pci: EHCI PCI platform driver
>[    1.180033] ehci-platform: EHCI generic platform driver
>[    1.180054] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.180070] ohci-pci: OHCI PCI platform driver
>[    1.180087] ohci-platform: OHCI generic platform driver
>[    1.180106] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.180211] xhci_hcd 0000:00:15.0: xHCI Host Controller
>[    1.180228] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
>[    1.181275] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
>[    1.181298] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
>[    1.181343] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.181361] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.181379] usb usb1: Product: xHCI Host Controller
>[    1.181392] usb usb1: Manufacturer: Linux 4.6.0-drm-intel-nightly-ww21-commit-c5034bf+ xhci-hcd
>[    1.181413] usb usb1: SerialNumber: 0000:00:15.0
>[    1.181509] hub 1-0:1.0: USB hub found
>[    1.181525] hub 1-0:1.0: 8 ports detected
>[    1.181950] xhci_hcd 0000:00:15.0: xHCI Host Controller
>[    1.181965] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
>[    1.182001] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.182018] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.182036] usb usb2: Product: xHCI Host Controller
>[    1.182050] usb usb2: Manufacturer: Linux 4.6.0-drm-intel-nightly-ww21-commit-c5034bf+ xhci-hcd
>[    1.182071] usb usb2: SerialNumber: 0000:00:15.0
>[    1.182159] hub 2-0:1.0: USB hub found
>[    1.182174] hub 2-0:1.0: 7 ports detected
>[    1.182595] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    1.183755] i8042: Warning: Keylock active
>[    1.185770] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.186643] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.187628] mousedev: PS/2 mouse device common for all mice
>[    1.188647] rtc_cmos 00:05: RTC can wake from S4
>[    1.189646] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>[    1.190537] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.191419] i2c /dev entries driver
>[    1.192332] device-mapper: uevent: version 1.0.3
>[    1.193260] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
>[    1.194152] ledtrig-cpu: registered to indicate activity on CPUs
>[    1.195034] EFI Variables Facility v0.08 2004-May-17
>[    1.199544] NET: Registered protocol family 10
>[    1.200579] NET: Registered protocol family 17
>[    1.201473] Key type dns_resolver registered
>[    1.202503] microcode: CPU0 sig=0x506c8, pf=0x1, revision=0x10
>[    1.203413] microcode: CPU1 sig=0x506c8, pf=0x1, revision=0x10
>[    1.204274] microcode: CPU2 sig=0x506c8, pf=0x1, revision=0x10
>[    1.205159] microcode: CPU3 sig=0x506c8, pf=0x1, revision=0x10
>[    1.206035] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    1.207013] registered taskstats version 1
>[    1.207862] Loading compiled-in X.509 certificates
>[    1.210659] Loaded X.509 cert 'Build time autogenerated kernel key: d07f260dd1c794ae917db199df90ed459f945cf6'
>[    1.211545] zswap: loaded using pool lzo/zbud
>[    1.213834] Key type trusted registered
>[    1.217435] Key type encrypted registered
>[    1.218322] AppArmor: AppArmor sha1 policy hashing enabled
>[    1.219163] ima: No TPM chip found, activating TPM-bypass!
>[    1.220011] evm: HMAC attrs: 0x1
>[    1.221201]   Magic number: 0:69:56
>[    1.222015] input mice: hash matches
>[    1.222919] rtc_cmos 00:05: setting system clock to 2016-05-18 02:03:03 UTC (1463536983)
>[    1.224212] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>[    1.225040] EDD information not available.
>[    1.225900] PM: Hibernation image not present or could not be loaded.
>[    1.226856] Freeing unused kernel memory: 1504K (ffffffff81d56000 - ffffffff81ece000)
>[    1.227712] Write protecting the kernel read-only data: 12288k
>[    1.228695] Freeing unused kernel memory: 28K (ffff8800017f9000 - ffff880001800000)
>[    1.230175] Freeing unused kernel memory: 408K (ffff880001b9a000 - ffff880001c00000)
>[    1.241013] random: systemd-udevd urandom read with 5 bits of entropy available
>[    1.245154] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
>[    1.261379] usb 1-2: new high-speed USB device number 2 using xhci_hcd
>[    1.280087] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.285743] ahci 0000:00:12.0: version 3.0
>[    1.287209] pps_core: LinuxPPS API ver. 1 registered
>[    1.287249] [drm] Initialized drm 1.1.0 20060810
>[    1.288928] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    1.289811] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
>[    1.290681] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst 
>[    1.291617] sdhci: Secure Digital Host Controller Interface driver
>[    1.292512] sdhci: Copyright(c) Pierre Ossman
>[    1.294464] PTP clock support registered
>[    1.295539] scsi host0: ahci
>[    1.296483] ata1: SATA max UDMA/133 abar m2048@0x92437000 port 0x92437100 irq 122
>[    1.297402] sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:5aca] (rev 3)
>[    1.298311] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
>[    1.298343] dca service started, version 1.12.1
>[    1.300097] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    1.300983] usb 1-2: Product: USB2.0 Hub
>[    1.302008] sdhci-pci 0000:00:1b.0: failed to setup card detect gpio
>[    1.302988] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
>[    1.303889] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    1.303961] hub 1-2:1.0: USB hub found
>[    1.304966] hub 1-2:1.0: 4 ports detected
>[    1.307035] mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit
>[    1.307957] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev 3)
>[    1.310531] atkbd serio0: Failed to enable keyboard on isa0060/serio0
>[    1.311474] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    1.313071] mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
>[    1.314296] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev 3)
>[    1.316221] Setting dangerous option preliminary_hw_support - tainting kernel
>[    1.319144] pps pps0: new PPS source ptp0
>[    1.319406] mmc2: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit
>[    1.320969] igb 0000:01:00.0: added PHC on eth0
>[    1.321868] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
>[    1.322791] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 90:49:fa:01:93:f7
>[    1.323707] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
>[    1.324618] igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
>[    1.326353] [drm:intel_detect_pch] No PCH found.
>[    1.326355] [drm:get_allowed_dc_mask] Allowed DC state mask 09
>[    1.326367] [drm:i915_dump_device_info] i915 device info: gen=9, pciid=0x5a84 rev=0x03 flags=need_gfx_hws,is_broxton,is_preliminary,has_fbc,has_hotplug,has_ddi,has_fpga_dbg,
>[    1.326426] [drm:intel_device_info_runtime_init] slice total: 1
>[    1.326427] [drm:intel_device_info_runtime_init] subslice total: 3
>[    1.326428] [drm:intel_device_info_runtime_init] subslice per slice: 3
>[    1.326428] [drm:intel_device_info_runtime_init] EU total: 18
>[    1.326429] [drm:intel_device_info_runtime_init] EU per subslice: 6
>[    1.326430] [drm:intel_device_info_runtime_init] has slice power gating: n
>[    1.326443] [drm:intel_device_info_runtime_init] has subslice power gating: y
>[    1.326444] [drm:intel_device_info_runtime_init] has EU power gating: y
>[    1.326445] [drm:intel_device_info_runtime_init] ppgtt mode: 3
>[    1.326651] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K
>[    1.326653] [drm] Memory usable by graphics device = 4096M
>[    1.327612] [drm:i915_ggtt_init_hw] GMADR size = 256M
>[    1.327617] [drm:i915_ggtt_init_hw] GTT stolen size = 64M
>[    1.327724] checking generic (80000000 8ca000) vs hw (80000000 10000000)
>[    1.327726] fb: switching to inteldrmfb from EFI VGA
>[    1.328853] Console: switching to colour dummy device 80x25
>[    1.329077] [drm] Replacing VGA console driver
>[    1.329157] [drm:intel_opregion_setup] graphic opregion physical addr: 0x7a01d018
>[    1.329161] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.329162] [drm:intel_opregion_setup] ASLE supported
>[    1.329164] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (RVDA)
>[    1.329186] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.329189] [drm] Driver supports precise vblank timestamp query.
>[    1.329191] [drm:init_vbt_defaults] Set default to SSC at 100000 kHz
>[    1.329192] [drm:intel_bios_init] VBT signature "$VBT BROXTON        ", BDB version 201
>[    1.329193] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
>[    1.329194] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    1.329195] [drm:intel_opregion_get_panel_type] Failed to get panel details from OpRegion (-19)
>[    1.329196] [drm:parse_lfp_panel_data] Panel type: 2 (VBT)
>[    1.329197] [drm:parse_lfp_panel_data] DRRS supported mode is seamless
>[    1.329198] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    1.329199] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    1.329200] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[    1.329201] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 180
>[    1.329202] [drm:parse_sdvo_device_mapping] Unsupported child device size for SDVO mapping.
>[    1.329203] [drm:parse_device_mapping] Expected child device config size for VBT version 201 not known; assuming 38
>[    1.329204] [drm:parse_driver_features] DRRS State Enabled:1
>[    1.329207] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    1.329208] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[    1.329209] [drm:parse_ddi_port] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.329210] [drm:parse_ddi_port] VBT HDMI level shift for port B: 8
>[    1.329211] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.329211] [drm:parse_ddi_port] VBT HDMI level shift for port C: 8
>[    1.329402] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    1.329407] [drm:gen9_set_dc_state] Setting DC state from 00 to 00
>[    1.329409] [drm:intel_power_well_enable] enabling power well 1
>[    1.329411] [drm:broxton_init_cdclk] CDCLK already enabled, won't reprogram it
>[    1.329412] [drm:broxton_phy_init] DDI PHY 1 not enabled, enabling it
>[    1.329456] [drm:__phy_reg_verify_state] DDI PHY 0 reg BXT_PORT_TX_DW14_LN(2, 0) [0006c938] state mismatch: current 00000000, expected 40000000 (mask 40000000)
>[    1.329460] [drm:__phy_reg_verify_state] DDI PHY 0 reg BXT_PORT_TX_DW14_LN(2, 2) [0006cb38] state mismatch: current 00000000, expected 40000000 (mask 40000000)
>[    1.329463] [drm:__phy_reg_verify_state] DDI PHY 0 reg BXT_PORT_TX_DW14_LN(2, 3) [0006cbb8] state mismatch: current 00000000, expected 40000000 (mask 40000000)
>[    1.329466] [drm:broxton_phy_init] DDI PHY 0 enabled with invalid state, force reprogramming it
>[    1.329489] [drm:intel_power_well_enable] enabling always-on
>[    1.329490] [drm:intel_power_well_enable] enabling DC off
>[    1.329491] [drm:gen9_set_dc_state] Setting DC state from 00 to 00
>[    1.329503] [drm:intel_power_well_enable] enabling power well 2
>[    1.329505] [drm:gen9_set_dc_state] Setting DC state from 00 to 00
>[    1.329519] [drm:intel_csr_ucode_init] Loading i915/bxt_dmc_ver1.bin
>[    1.329623] [drm] Finished loading i915/bxt_dmc_ver1.bin (v1.7)
>[    1.332721] [drm:intel_print_wm_latency] Gen9 Plane WM0 latency 22 (22.0 usec)
>[    1.332723] [drm:intel_print_wm_latency] Gen9 Plane WM1 latency 22 (22.0 usec)
>[    1.332724] [drm:intel_print_wm_latency] Gen9 Plane WM2 latency 22 (22.0 usec)
>[    1.332724] [drm:intel_print_wm_latency] Gen9 Plane WM3 latency 49 (49.0 usec)
>[    1.332725] [drm:intel_print_wm_latency] Gen9 Plane WM4 latency 49 (49.0 usec)
>[    1.332726] [drm:intel_print_wm_latency] Gen9 Plane WM5 latency 49 (49.0 usec)
>[    1.332727] [drm:intel_print_wm_latency] Gen9 Plane WM6 latency 49 (49.0 usec)
>[    1.332728] [drm:intel_print_wm_latency] Gen9 Plane WM7 latency 49 (49.0 usec)
>[    1.332729] [drm:intel_modeset_init] 3 display pipes available.
>[    1.332743] [drm:intel_update_cdclk] Current CD clock rate: 624000 kHz
>[    1.332743] [drm:intel_update_max_cdclk] Max CD clock rate: 624000 kHz
>[    1.332744] [drm:intel_update_max_cdclk] Max dotclock rate: 624000 kHz
>[    1.332747] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    1.333052] [drm:intel_ddi_init] BXT BIOS forgot to set DDI_A_4_LANES for port A; fixing
>[    1.333054] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    1.333089] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 5000
>[    1.333090] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    1.333091] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500
>[    1.333092] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    1.333093] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[    1.333157] [drm:intel_edp_panel_vdd_sanitize] VDD left on by BIOS, adjusting state tracking
>[    1.333973] [drm:intel_dp_get_dpcd] DPCD: 11 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00
>[    1.334135] [drm:intel_dp_get_dpcd] Detected EDP PSR Panel.
>[    1.334214] [drm:intel_dp_get_dpcd] EDP DPCD : 02 fb c7
>[    1.334215] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no
>[    1.334217] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    1.334218] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    1.334219] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    1.334220] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
>[    1.335096] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.335097] [drm:intel_dp_drrs_init] Downclock mode is not found. DRRS not supported
>[    1.335099] [drm:get_backlight_max_vbt] VBT defined backlight frequency 200 Hz
>[    1.335101] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, disabled, brightness 0/96000
>[    1.335114] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    1.335140] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
>[    1.335249] [drm:intel_dp_init_connector] Adding DP connector on port C
>[    1.335266] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2
>[    1.335394] [drm:intel_dsi_init] 
>[    1.335407] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: enabled
>[    1.335409] [drm:intel_modeset_readout_hw_state] [CRTC:31] hw state readout: disabled
>[    1.335411] [drm:intel_modeset_readout_hw_state] [CRTC:36] hw state readout: disabled
>[    1.335412] [drm:intel_modeset_readout_hw_state] PORT PLL A hw state readout: crtc_mask 0x00000000, on 0
>[    1.335417] [drm:intel_modeset_readout_hw_state] PORT PLL B hw state readout: crtc_mask 0x00000001, on 1
>[    1.335418] [drm:intel_modeset_readout_hw_state] PORT PLL C hw state readout: crtc_mask 0x00000000, on 0
>[    1.335419] [drm:intel_modeset_readout_hw_state] [ENCODER:38:TMDS-38] hw state readout: disabled, pipe A
>[    1.335422] [drm:intel_modeset_readout_hw_state] [ENCODER:46:TMDS-46] hw state readout: enabled, pipe A
>[    1.335423] [drm:intel_modeset_readout_hw_state] [ENCODER:48:DP MST-48] hw state readout: disabled, pipe A
>[    1.335424] [drm:intel_modeset_readout_hw_state] [ENCODER:49:DP MST-49] hw state readout: disabled, pipe B
>[    1.335425] [drm:intel_modeset_readout_hw_state] [ENCODER:50:DP MST-50] hw state readout: disabled, pipe C
>[    1.335426] [drm:intel_modeset_readout_hw_state] [ENCODER:53:TMDS-53] hw state readout: disabled, pipe A
>[    1.335426] [drm:intel_modeset_readout_hw_state] [ENCODER:55:DP MST-55] hw state readout: disabled, pipe A
>[    1.335427] [drm:intel_modeset_readout_hw_state] [ENCODER:56:DP MST-56] hw state readout: disabled, pipe B
>[    1.335428] [drm:intel_modeset_readout_hw_state] [ENCODER:57:DP MST-57] hw state readout: disabled, pipe C
>[    1.335429] [drm:intel_modeset_readout_hw_state] [CONNECTOR:39:eDP-1] hw state readout: disabled
>[    1.335431] [drm:intel_modeset_readout_hw_state] [CONNECTOR:47:DP-1] hw state readout: enabled
>[    1.335432] [drm:intel_modeset_readout_hw_state] [CONNECTOR:51:HDMI-A-1] hw state readout: disabled
>[    1.335433] [drm:intel_modeset_readout_hw_state] [CONNECTOR:54:DP-2] hw state readout: disabled
>[    1.335435] [drm:intel_modeset_readout_hw_state] [CONNECTOR:58:HDMI-A-2] hw state readout: disabled
>[    1.335444] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff880270d05000 for pipe A
>[    1.335445] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    1.335446] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.335447] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.335448] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 1794230, gmch_n: 8388608, link_m: 149519, link_n: 524288, tu: 64
>[    1.335449] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.335449] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.335450] [drm:intel_dump_pipe_config] requested mode:
>[    1.335452] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 153999 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9
>[    1.335452] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.335454] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 153999 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9
>[    1.335455] [drm:intel_dump_crtc_timings] crtc timings: 153999 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x40 flags: 0x9
>[    1.335455] [drm:intel_dump_pipe_config] port clock: 540000
>[    1.335456] [drm:intel_dump_pipe_config] pipe src size: 1920x1200
>[    1.335457] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0
>[    1.335458] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.335459] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x078004b0, enabled
>[    1.335459] [drm:intel_dump_pipe_config] ips: 0
>[    1.335460] [drm:intel_dump_pipe_config] double wide: 0
>[    1.335461] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ebb0: 0x4100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x58
>[    1.335462] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.335463] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = -1
>[    1.335464] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    1.335465] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1
>[    1.335466] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = -1
>[    1.335467] [drm:intel_dump_pipe_config] [CRTC:31][setup_hw_state] config ffff880270d06000 for pipe B
>[    1.335468] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.335469] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.335469] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.335470] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.335471] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.335472] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.335473] [drm:intel_dump_pipe_config] requested mode:
>[    1.335474] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.335474] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.335476] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.335477] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.335477] [drm:intel_dump_pipe_config] port clock: 0
>[    1.335478] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.335479] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0
>[    1.335479] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.335480] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.335481] [drm:intel_dump_pipe_config] ips: 0
>[    1.335482] [drm:intel_dump_pipe_config] double wide: 0
>[    1.335483] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0
>[    1.335483] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.335484] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 1.0 idx: 4 disabled, scaler_id = -1
>[    1.335487] [drm:intel_dump_pipe_config] CURSOR PLANE:30 plane: 1.2 idx: 5 disabled, scaler_id = -1
>[    1.335487] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 1.1 idx: 6 disabled, scaler_id = -1
>[    1.335488] [drm:intel_dump_pipe_config] STANDARD PLANE:33 plane: 1.2 idx: 7 disabled, scaler_id = -1
>[    1.335490] [drm:intel_dump_pipe_config] [CRTC:36][setup_hw_state] config ffff880270d07000 for pipe C
>[    1.335490] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.335491] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    1.335492] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.335493] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.335494] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.335494] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.335495] [drm:intel_dump_pipe_config] requested mode:
>[    1.335496] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.335497] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.335498] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.335499] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.335500] [drm:intel_dump_pipe_config] port clock: 0
>[    1.335500] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    1.335501] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: 0
>[    1.335502] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.335503] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.335503] [drm:intel_dump_pipe_config] ips: 0
>[    1.335504] [drm:intel_dump_pipe_config] double wide: 0
>[    1.335505] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0
>[    1.335506] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.335507] [drm:intel_dump_pipe_config] STANDARD PLANE:34 plane: 2.0 idx: 8 disabled, scaler_id = -1
>[    1.335508] [drm:intel_dump_pipe_config] CURSOR PLANE:35 plane: 2.3 idx: 9 disabled, scaler_id = -1
>[    1.335509] [drm:intel_dump_pipe_config] STANDARD PLANE:37 plane: 2.1 idx: 10 disabled, scaler_id = -1
>[    1.335614] [drm:skylake_get_initial_plane_config] pipe A with fb: size=1920x1200@32, offset=0, pitch 7680, size 0x8ca000
>[    1.335616] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=8ca000
>[    1.335619] [drm:i915_pages_create_for_stolen] offset=0x0, size=9216000
>[    1.335621] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff88007442c000
>[    1.335675] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 8ca000
>[    1.335676] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [8ca000, fffff000]
>[    1.335756] [drm:i915_gem_context_init] LR context support initialized
>[    1.335766] [drm:intel_init_pipe_control] render ring pipe control offset: 0x008cb000
>[    1.335772] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000
>[    1.335773] [drm:i915_pages_create_for_stolen] offset=0x8ca000, size=16384
>[    1.335795] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000
>[    1.335796] [drm:i915_pages_create_for_stolen] offset=0x8ce000, size=16384
>[    1.335803] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000
>[    1.335804] [drm:i915_pages_create_for_stolen] offset=0x8d2000, size=16384
>[    1.335812] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000
>[    1.335813] [drm:i915_pages_create_for_stolen] offset=0x8d6000, size=16384
>[    1.335821] [drm:gen8_init_common_ring] Execlists enabled for render ring
>[    1.335841] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
>[    1.335859] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
>[    1.335876] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
>[    1.335904] [drm:intel_update_cdclk] Current CD clock rate: 624000 kHz
>[    1.335927] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered
>[    1.335929] [drm:intel_fbdev_init_bios] found possible fb from plane A
>[    1.335930] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping
>[    1.335931] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping
>[    1.335931] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb
>[    1.335933] [drm:intel_fbdev_init_bios] pipe A area: 1920x1200, bpp: 32, size: 9216000
>[    1.335933] [drm:intel_fbdev_init_bios] fb big enough for plane A (9216000 >= 9216000)
>[    1.335934] [drm:intel_fbdev_init_bios] pipe B not active, skipping
>[    1.335935] [drm:intel_fbdev_init_bios] pipe C not active, skipping
>[    1.335936] [drm:intel_fbdev_init_bios] using BIOS fb for initial console
>[    1.335939] [drm:bxt_hpd_irq_setup] Invert bit setting: hp_ctl:18001919 hp_port:38
>[    1.335948] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1]
>[    1.335950] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1]
>[    1.336166] [drm:intel_didl_outputs] More than 15 outputs detected via ACPI
>[    1.336800] igb 0000:01:00.0 enp1s0: renamed from eth0
>[    1.337975] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    1.338134] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
>[    1.338187] [drm] Initialized i915 1.6.0 20160508 for 0000:00:02.0 on minor 0
>[    1.338966] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[    1.341031] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    1.343118] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] status updated from unknown to connected
>[    1.343126] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.343128] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes :
>[    1.343129] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[    1.343130] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1]
>[    1.343131] [drm:intel_dp_detect] [CONNECTOR:47:DP-1]
>[    1.343818] usb 1-4: new high-speed USB device number 3 using xhci_hcd
>[    1.345222] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00
>[    1.347299] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes
>[    1.347300] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    1.347301] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000
>[    1.347302] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000
>[    1.349456] [drm:intel_dp_probe_mst] Sink is not MST capable
>[    1.351447] [drm:drm_dp_i2c_do_msg] native defer
>[    1.355615] [drm:drm_dp_i2c_do_msg] native defer
>[    1.357818] [drm:drm_dp_i2c_do_msg] native defer
>[    1.358573] [drm:drm_dp_i2c_do_msg] native defer
>[    1.359326] [drm:drm_dp_i2c_do_msg] native defer
>[    1.360078] [drm:drm_dp_i2c_do_msg] native defer
>[    1.361113] [drm:drm_dp_i2c_do_msg] native defer
>[    1.361969] [drm:drm_dp_i2c_do_msg] native defer
>[    1.362726] [drm:drm_dp_i2c_do_msg] native defer
>[    1.363503] [drm:drm_dp_i2c_do_msg] native defer
>[    1.364284] [drm:drm_dp_i2c_do_msg] native defer
>[    1.365068] [drm:drm_dp_i2c_do_msg] native defer
>[    1.365952] [drm:drm_dp_i2c_do_msg] native defer
>[    1.367269] [drm:drm_dp_i2c_do_msg] native defer
>[    1.368067] [drm:drm_dp_i2c_do_msg] native defer
>[    1.368860] [drm:drm_dp_i2c_do_msg] native defer
>[    1.369654] [drm:drm_dp_i2c_do_msg] native defer
>[    1.370417] [drm:drm_dp_i2c_do_msg] native defer
>[    1.371181] [drm:drm_dp_i2c_do_msg] native defer
>[    1.371946] [drm:drm_dp_i2c_do_msg] native defer
>[    1.372698] [drm:drm_dp_i2c_do_msg] native defer
>[    1.373493] [drm:drm_dp_i2c_do_msg] native defer
>[    1.374289] [drm:drm_dp_i2c_do_msg] native defer
>[    1.375086] [drm:drm_dp_i2c_do_msg] native defer
>[    1.375879] [drm:drm_dp_i2c_do_msg] native defer
>[    1.380553] [drm:drm_dp_i2c_do_msg] native defer
>[    1.381349] [drm:drm_dp_i2c_do_msg] native defer
>[    1.382139] [drm:drm_dp_i2c_do_msg] native defer
>[    1.382931] [drm:drm_dp_i2c_do_msg] native defer
>[    1.383582] [drm:drm_detect_monitor_audio] Monitor has basic audio support
>[    1.383712] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] status updated from unknown to connected
>[    1.383736] [drm:drm_edid_to_eld] ELD monitor DELL 2408WFP
>[    1.383738] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0
>[    1.383738] [drm:drm_edid_to_eld] ELD size 36, SAD count 1
>[    1.383746] [drm:drm_mode_debug_printmodeline] Modeline 83:"720x480i" 0 13500 720 739 801 858 480 488 494 525 0x40 0x101a
>[    1.383747] [drm:drm_mode_prune_invalid] Not using 720x480i mode: H_ILLEGAL
>[    1.383748] [drm:drm_mode_debug_printmodeline] Modeline 84:"720x576i" 0 13500 720 732 795 864 576 580 586 625 0x40 0x101a
>[    1.383749] [drm:drm_mode_prune_invalid] Not using 720x576i mode: H_ILLEGAL
>[    1.383750] [drm:drm_mode_debug_printmodeline] Modeline 96:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a
>[    1.383751] [drm:drm_mode_prune_invalid] Not using 720x480i mode: H_ILLEGAL
>[    1.383753] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] probed modes :
>[    1.383755] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    1.383756] [drm:drm_mode_debug_printmodeline] Modeline 63:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[    1.383757] [drm:drm_mode_debug_printmodeline] Modeline 86:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[    1.383758] [drm:drm_mode_debug_printmodeline] Modeline 64:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[    1.383760] [drm:drm_mode_debug_printmodeline] Modeline 87:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[    1.383761] [drm:drm_mode_debug_printmodeline] Modeline 68:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    1.383762] [drm:drm_mode_debug_printmodeline] Modeline 74:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.383764] [drm:drm_mode_debug_printmodeline] Modeline 67:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.383765] [drm:drm_mode_debug_printmodeline] Modeline 69:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    1.383766] [drm:drm_mode_debug_printmodeline] Modeline 65:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    1.383768] [drm:drm_mode_debug_printmodeline] Modeline 88:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    1.383769] [drm:drm_mode_debug_printmodeline] Modeline 75:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    1.383770] [drm:drm_mode_debug_printmodeline] Modeline 76:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.383771] [drm:drm_mode_debug_printmodeline] Modeline 77:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    1.383773] [drm:drm_mode_debug_printmodeline] Modeline 70:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.383774] [drm:drm_mode_debug_printmodeline] Modeline 89:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
>[    1.383775] [drm:drm_mode_debug_printmodeline] Modeline 66:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    1.383776] [drm:drm_mode_debug_printmodeline] Modeline 71:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    1.383778] [drm:drm_mode_debug_printmodeline] Modeline 90:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.383779] [drm:drm_mode_debug_printmodeline] Modeline 72:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.383780] [drm:drm_mode_debug_printmodeline] Modeline 73:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    1.383782] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1]
>[    1.383783] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1]
>[    1.383823] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    1.383824] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    1.383872] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    1.383874] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.383913] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    1.383914] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    1.383951] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    1.383953] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] status updated from unknown to disconnected
>[    1.383954] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected
>[    1.383955] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2]
>[    1.383956] [drm:intel_dp_detect] [CONNECTOR:54:DP-2]
>[    1.384205] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00
>[    1.384424] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no
>[    1.384426] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    1.384427] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    1.384428] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    1.384659] [drm:intel_dp_probe_oui] Sink OUI: 00e04c
>[    1.384887] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    1.388560] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x45b40ad2fa6, max_idle_ns: 440795238136 ns
>[    1.398046] usb 1-4: New USB device found, idVendor=0b95, idProduct=7720
>[    1.398050] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    1.398052] usb 1-4: Product: AX88772 
>[    1.398054] usb 1-4: SerialNumber: 00D921
>[    1.404492] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] status updated from unknown to connected
>[    1.404497] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.404500] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] probed modes :
>[    1.404502] [drm:drm_mode_debug_printmodeline] Modeline 79:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    1.404503] [drm:drm_mode_debug_printmodeline] Modeline 82:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
>[    1.404504] [drm:drm_mode_debug_printmodeline] Modeline 92:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.404506] [drm:drm_mode_debug_printmodeline] Modeline 81:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.404507] [drm:drm_mode_debug_printmodeline] Modeline 80:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    1.404508] [drm:drm_mode_debug_printmodeline] Modeline 93:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    1.404510] [drm:drm_mode_debug_printmodeline] Modeline 94:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.404511] [drm:drm_mode_debug_printmodeline] Modeline 95:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    1.404512] [drm:drm_mode_debug_printmodeline] Modeline 83:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.404513] [drm:drm_mode_debug_printmodeline] Modeline 84:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    1.404515] [drm:drm_mode_debug_printmodeline] Modeline 85:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.404516] [drm:drm_mode_debug_printmodeline] Modeline 91:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    1.404517] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2]
>[    1.404518] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2]
>[    1.404568] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    1.404569] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    1.404618] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    1.404620] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.404671] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    1.404672] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    1.404721] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    1.404723] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] status updated from unknown to disconnected
>[    1.404724] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected
>[    1.404726] [drm:drm_setup_crtcs] 
>[    1.404727] [drm:drm_enable_connectors] connector 39 enabled? yes
>[    1.404728] [drm:drm_enable_connectors] connector 47 enabled? yes
>[    1.404729] [drm:drm_enable_connectors] connector 51 enabled? no
>[    1.404729] [drm:drm_enable_connectors] connector 54 enabled? yes
>[    1.404730] [drm:drm_enable_connectors] connector 58 enabled? no
>[    1.404732] [drm:intel_fb_initial_config] connector eDP-1 has no encoder or crtc, skipping
>[    1.404733] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1
>[    1.404733] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0
>[    1.404735] [drm:intel_fb_initial_config] connector DP-1 on pipe A [CRTC:26]: 1920x1200
>[    1.404735] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.404736] [drm:intel_fb_initial_config] connector DP-2 has no encoder or crtc, skipping
>[    1.404737] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    1.404737] [drm:intel_fb_initial_config] fallback: Not all outputs enabled
>[    1.404738] [drm:intel_fb_initial_config] Enabled: 1, detected: 3
>[    1.404739] [drm:intel_fb_initial_config] Not using firmware configuration
>[    1.404740] [drm:drm_target_preferred] looking for cmdline mode on connector 39
>[    1.404741] [drm:drm_target_preferred] looking for preferred mode on connector 39 0
>[    1.404741] [drm:drm_target_preferred] found mode 1920x1080
>[    1.404742] [drm:drm_target_preferred] looking for cmdline mode on connector 47
>[    1.404743] [drm:drm_target_preferred] looking for preferred mode on connector 47 0
>[    1.404743] [drm:drm_target_preferred] found mode 1920x1200
>[    1.404744] [drm:drm_target_preferred] looking for cmdline mode on connector 54
>[    1.404745] [drm:drm_target_preferred] looking for preferred mode on connector 54 0
>[    1.404745] [drm:drm_target_preferred] found mode 1920x1080
>[    1.404746] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
>[    1.404750] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    1.404751] [drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 31 (0,0)
>[    1.404752] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 36 (0,0)
>[    1.404753] [drm:intelfb_create] re-using BIOS fb
>[    1.404757] [drm:intelfb_create] allocated 1920x1200 fb: 0x00000000, bo ffff88007442c000
>[    1.404812] fbcon: inteldrmfb (fb0) is primary device
>[    1.404863] [drm:connected_sink_compute_bpp] [CONNECTOR:39:eDP-1] checking for sink bpp constrains
>[    1.404864] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24
>[    1.404865] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31
>[    1.404866] [drm:skl_update_scaler] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0
>[    1.404866] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz
>[    1.404869] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24
>[    1.404869] [drm:intel_dp_compute_config] DP link bw required 331488 available 432000
>[    1.404870] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[    1.404871] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff880270718000 for pipe A
>[    1.404871] [drm:intel_dump_pipe_config] cpu_transcoder: EDP
>[    1.404872] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.404872] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.404873] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64
>[    1.404874] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.404874] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.404874] [drm:intel_dump_pipe_config] requested mode:
>[    1.404875] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[    1.404876] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.404877] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[    1.404877] [drm:intel_dump_crtc_timings] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa
>[    1.404878] [drm:intel_dump_pipe_config] port clock: 270000
>[    1.404878] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.404879] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[    1.404879] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.404880] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.404880] [drm:intel_dump_pipe_config] ips: 0
>[    1.404880] [drm:intel_dump_pipe_config] double wide: 0
>[    1.404881] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ebb0: 0x4100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x58
>[    1.404881] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.404883] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled
>[    1.404884] [drm:intel_dump_pipe_config] 	FB:60, fb = 1920x1200 format = 0x34325258
>[    1.404884] [drm:intel_dump_pipe_config] 	scaler:-1 src (0, 0) 1920x1200 dst (0, 0) 1920x1200
>[    1.404884] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = -1
>[    1.404885] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = -1
>[    1.404885] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 0.2 idx: 3 disabled, scaler_id = -1
>[    1.404886] [drm:connected_sink_compute_bpp] [CONNECTOR:47:DP-1] checking for sink bpp constrains
>[    1.404886] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24
>[    1.404887] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 540000 pixel clock 154000KHz
>[    1.404889] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24
>[    1.404889] [drm:intel_dp_compute_config] DP link bw required 369600 available 518400
>[    1.404889] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[    1.404890] [drm:intel_dump_pipe_config] [CRTC:31][modeset] config ffff880270718800 for pipe B
>[    1.404890] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    1.404891] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.404891] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.404892] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5980766, gmch_n: 8388608, link_m: 249198, link_n: 262144, tu: 64
>[    1.404893] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.404893] [drm:intel_dump_pipe_config] audio: 1, infoframes: 0
>[    1.404893] [drm:intel_dump_pipe_config] requested mode:
>[    1.404894] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    1.404895] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.404895] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    1.404896] [drm:intel_dump_crtc_timings] crtc timings: 154000 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x48 flags: 0x9
>[    1.404897] [drm:intel_dump_pipe_config] port clock: 162000
>[    1.404897] [drm:intel_dump_pipe_config] pipe src size: 1920x1200
>[    1.404897] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0
>[    1.404898] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.404898] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.404899] [drm:intel_dump_pipe_config] ips: 0
>[    1.404899] [drm:intel_dump_pipe_config] double wide: 0
>[    1.404900] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0
>[    1.404900] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.404901] [drm:intel_dump_pipe_config] STANDARD PLANE:29 plane: 1.0 idx: 4 disabled, scaler_id = -1
>[    1.404901] [drm:intel_dump_pipe_config] CURSOR PLANE:30 plane: 1.2 idx: 5 disabled, scaler_id = -1
>[    1.404902] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 1.1 idx: 6 disabled, scaler_id = -1
>[    1.404902] [drm:intel_dump_pipe_config] STANDARD PLANE:33 plane: 1.2 idx: 7 disabled, scaler_id = -1
>[    1.404903] [drm:connected_sink_compute_bpp] [CONNECTOR:54:DP-2] checking for sink bpp constrains
>[    1.404903] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24
>[    1.404904] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 270000 pixel clock 148500KHz
>[    1.404905] [drm:intel_dp_compute_config] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24
>[    1.404905] [drm:intel_dp_compute_config] DP link bw required 356400 available 518400
>[    1.404906] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[    1.404906] [drm:intel_dump_pipe_config] [CRTC:36][modeset] config ffff880270719000 for pipe C
>[    1.404907] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    1.404907] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    1.404907] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    1.404908] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m: 5767168, gmch_n: 8388608, link_m: 240298, link_n: 262144, tu: 64
>[    1.404909] [drm:intel_dump_pipe_config] dp: 1, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    1.404909] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.404909] [drm:intel_dump_pipe_config] requested mode:
>[    1.404910] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    1.404910] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.404911] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    1.404912] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x48 flags: 0x5
>[    1.404913] [drm:intel_dump_pipe_config] port clock: 162000
>[    1.404913] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    1.404913] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: 0
>[    1.404914] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    1.404914] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.404915] [drm:intel_dump_pipe_config] ips: 0
>[    1.404915] [drm:intel_dump_pipe_config] double wide: 0
>[    1.404916] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0
>[    1.404916] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.404917] [drm:intel_dump_pipe_config] STANDARD PLANE:34 plane: 2.0 idx: 8 disabled, scaler_id = -1
>[    1.404917] [drm:intel_dump_pipe_config] CURSOR PLANE:35 plane: 2.3 idx: 9 disabled, scaler_id = -1
>[    1.404918] [drm:intel_dump_pipe_config] STANDARD PLANE:37 plane: 2.1 idx: 10 disabled, scaler_id = -1
>[    1.404919] [drm:intel_modeset_checks] New cdclk calculated to be atomic 288000, actual 288000
>[    1.404921] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0
>[    1.404922] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4
>[    1.404922] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8
>[    1.404923] [drm:bxt_get_dpll] CRTC:26 using pre-allocated PORT PLL A
>[    1.404924] [drm:intel_reference_shared_dpll] using PORT PLL A for pipe A
>[    1.404924] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26] scaler_user index 0.31
>[    1.404925] [drm:bxt_get_dpll] CRTC:31 using pre-allocated PORT PLL B
>[    1.404925] [drm:intel_reference_shared_dpll] using PORT PLL B for pipe B
>[    1.404926] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:31] scaler_user index 1.31
>[    1.404926] [drm:skl_update_scaler] scaler_user index 1.31: Staged freeing scaler id 0 scaler_users = 0x0
>[    1.404927] [drm:bxt_get_dpll] CRTC:36 using pre-allocated PORT PLL C
>[    1.404927] [drm:intel_reference_shared_dpll] using PORT PLL C for pipe C
>[    1.404928] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:36] scaler_user index 2.31
>[    1.404928] [drm:skl_update_scaler] scaler_user index 2.31: Staged freeing scaler id 0 scaler_users = 0x0
>[    1.405139] usb 1-2.1: new low-speed USB device number 4 using xhci_hcd
>[    1.408068] [drm:intel_disable_pipe] disabling pipe A
>[    1.412475] [drm:intel_disable_shared_dpll] disable PORT PLL B (active 1, on? 1) for crtc 26
>[    1.412481] [drm:intel_disable_shared_dpll] disabling PORT PLL B
>[    1.418274] mmc1: new HS400 MMC card at address 0001
>[    1.419671] mmcblk1: mmc1:0001 CGND3R 58.2 GiB 
>[    1.419752] mmcblk1boot0: mmc1:0001 CGND3R partition 1 4.00 MiB
>[    1.419822] mmcblk1boot1: mmc1:0001 CGND3R partition 2 4.00 MiB
>[    1.419905] mmcblk1rpmb: mmc1:0001 CGND3R partition 3 4.00 MiB
>[    1.420550] [drm:intel_update_cdclk] Current CD clock rate: 288000 kHz
>[    1.420550] [drm:verify_encoder_state] [ENCODER:38:TMDS-38]
>[    1.420551] [drm:verify_encoder_state] [ENCODER:46:TMDS-46]
>[    1.420552] [drm:verify_encoder_state] [ENCODER:48:DP MST-48]
>[    1.420552] [drm:verify_encoder_state] [ENCODER:49:DP MST-49]
>[    1.420552] [drm:verify_encoder_state] [ENCODER:50:DP MST-50]
>[    1.420553] [drm:verify_encoder_state] [ENCODER:53:TMDS-53]
>[    1.420553] [drm:verify_encoder_state] [ENCODER:55:DP MST-55]
>[    1.420553] [drm:verify_encoder_state] [ENCODER:56:DP MST-56]
>[    1.420554] [drm:verify_encoder_state] [ENCODER:57:DP MST-57]
>[    1.420555] [drm:intel_connector_verify_state] [CONNECTOR:51:HDMI-A-1]
>[    1.420556] [drm:intel_connector_verify_state] [CONNECTOR:58:HDMI-A-2]
>[    1.420557] [drm:verify_single_dpll_state] PORT PLL A
>[    1.420557] [drm:verify_single_dpll_state] PORT PLL B
>[    1.420558] [drm:verify_single_dpll_state] PORT PLL C
>[    1.420559] [drm:intel_enable_shared_dpll] enable PORT PLL A (active 1, on? 0) for crtc 26
>[    1.420559] [drm:intel_enable_shared_dpll] enabling PORT PLL A
>[    1.420581] [drm:edp_panel_on] Turn eDP port A panel power on
>[    1.420581] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    1.420729]  mmcblk1: p1 p2 p3 p4
>[    1.422162] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.428852] ata1.00: ATA-9: INTEL SSDSC2BW080A4, DC22, max UDMA/133
>[    1.428853] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.430264] usb 1-2.1: New USB device found, idVendor=046d, idProduct=c077
>[    1.430265] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.430265] usb 1-2.1: Product: USB Optical Mouse
>[    1.430266] usb 1-2.1: Manufacturer: Logitech
>[    1.435599] ata1.00: configured for UDMA/133
>[    1.435734] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2BW08 DC22 PQ: 0 ANSI: 5
>[    1.450237] usb 1-2.2: new low-speed USB device number 5 using xhci_hcd
>[    1.455704] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
>[    1.455760] sd 0:0:0:0: [sda] Write Protect is off
>[    1.455761] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.455776] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.455815] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.456538]  sda: sda1 sda2 sda3
>[    1.456773] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.458547] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 0000006a
>[    1.458548] [drm:wait_panel_status] Wait complete
>[    1.458549] [drm:wait_panel_on] Wait for panel power on
>[    1.458549] [drm:wait_panel_status] mask b000000f value 80000008 status 9000000a control 0000006b
>[    1.494145] usb 1-2.2: New USB device found, idVendor=03f0, idProduct=0024
>[    1.494146] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.494147] usb 1-2.2: Product: HP Basic USB Keyboard
>[    1.494147] usb 1-2.2: Manufacturer: CHICONY
>[    1.505230] usbcore: registered new interface driver usbhid
>[    1.505231] usbhid: USB HID core driver
>[    1.506384] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:046D:C077.0001/input/input7
>[    1.506470] hid-generic 0003:046D:C077.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:15.0-2.1/input0
>[    1.506550] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-2/1-2.2/1-2.2:1.0/0003:03F0:0024.0002/input/input8
>[    1.509661] [drm:wait_panel_status] Wait complete
>[    1.510385] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[    1.510385] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    1.510609] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[    1.511131] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[    1.511169] [drm:skylake_pfit_enable] for crtc_state = ffff880270718000
>[    1.511211] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[    1.511213] [drm:intel_enable_pipe] enabling pipe A
>[    1.511225] [drm:intel_edp_backlight_on] 
>[    1.511226] [drm:intel_panel_enable_backlight] pipe A
>[    1.511227] [drm:intel_panel_actually_set_backlight] set backlight PWM = 96000
>[    1.515427] [drm:intel_psr_enable] PSR not supported on this platform
>[    1.515428] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
>[    1.515444] [drm:intel_enable_shared_dpll] enable PORT PLL B (active 2, on? 0) for crtc 31
>[    1.515444] [drm:intel_enable_shared_dpll] enabling PORT PLL B
>[    1.516196] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[    1.516196] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    1.517174] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[    1.520449] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[    1.520495] [drm:skylake_pfit_enable] for crtc_state = ffff880270718800
>[    1.520538] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[    1.520539] [drm:skl_wm_flush_pipe] flush pipe B (pass 3)
>[    1.520541] [drm:intel_enable_pipe] enabling pipe B
>[    1.520551] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:47:DP-1], [ENCODER:46:TMDS-46]
>[    1.520552] [drm:hsw_audio_codec_enable] Enable audio codec on pipe B, 36 bytes ELD
>[    1.520565] [drm:intel_enable_shared_dpll] enable PORT PLL C (active 4, on? 0) for crtc 36
>[    1.520565] [drm:intel_enable_shared_dpll] enabling PORT PLL C
>[    1.521467] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:15.0-2.2/input0
>[    1.523943] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[    1.523943] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    1.526320] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[    1.527499] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[    1.527608] [drm:skylake_pfit_enable] for crtc_state = ffff880270719000
>[    1.527656] [drm:skl_wm_flush_pipe] flush pipe A (pass 3)
>[    1.527657] [drm:skl_wm_flush_pipe] flush pipe B (pass 3)
>[    1.527658] [drm:skl_wm_flush_pipe] flush pipe C (pass 3)
>[    1.527660] [drm:intel_enable_pipe] enabling pipe C
>[    1.533575] [drm:intel_connector_verify_state] [CONNECTOR:39:eDP-1]
>[    1.533578] [drm:verify_crtc_state] [CRTC:26]
>[    1.533588] [drm:intel_ddi_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
>[    1.533591] [drm:verify_single_dpll_state] PORT PLL A
>[    1.533598] [drm:intel_connector_verify_state] [CONNECTOR:47:DP-1]
>[    1.533599] [drm:verify_crtc_state] [CRTC:31]
>[    1.533609] [drm:verify_single_dpll_state] PORT PLL B
>[    1.533615] [drm:intel_connector_verify_state] [CONNECTOR:54:DP-2]
>[    1.533616] [drm:verify_crtc_state] [CRTC:36]
>[    1.533623] [drm:verify_single_dpll_state] PORT PLL C
>[    1.533643] [drm:drm_fb_helper_hotplug_event] 
>[    1.533644] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1]
>[    1.533645] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1]
>[    1.533652] Console: switching to colour frame buffer device 240x75
>[    1.533732] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[    1.533815] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    1.533910] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.533912] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes :
>[    1.533913] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[    1.533913] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1]
>[    1.533914] [drm:intel_dp_detect] [CONNECTOR:47:DP-1]
>[    1.535952] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00
>[    1.536036] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes
>[    1.536037] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    1.536038] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000
>[    1.536038] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000
>[    1.536230] [drm:intel_dp_probe_mst] Sink is not MST capable
>[    1.538317] [drm:drm_edid_to_eld] ELD monitor DELL 2408WFP
>[    1.538318] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0
>[    1.538319] [drm:drm_edid_to_eld] ELD size 36, SAD count 1
>[    1.538327] [drm:drm_mode_debug_printmodeline] Modeline 122:"720x480i" 0 13500 720 739 801 858 480 488 494 525 0x40 0x101a
>[    1.538327] [drm:drm_mode_prune_invalid] Not using 720x480i mode: H_ILLEGAL
>[    1.538328] [drm:drm_mode_debug_printmodeline] Modeline 123:"720x576i" 0 13500 720 732 795 864 576 580 586 625 0x40 0x101a
>[    1.538328] [drm:drm_mode_prune_invalid] Not using 720x576i mode: H_ILLEGAL
>[    1.538329] [drm:drm_mode_debug_printmodeline] Modeline 135:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a
>[    1.538330] [drm:drm_mode_prune_invalid] Not using 720x480i mode: H_ILLEGAL
>[    1.538331] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] probed modes :
>[    1.538332] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    1.538333] [drm:drm_mode_debug_printmodeline] Modeline 63:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[    1.538334] [drm:drm_mode_debug_printmodeline] Modeline 86:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[    1.538335] [drm:drm_mode_debug_printmodeline] Modeline 64:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[    1.538336] [drm:drm_mode_debug_printmodeline] Modeline 87:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[    1.538337] [drm:drm_mode_debug_printmodeline] Modeline 68:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    1.538337] [drm:drm_mode_debug_printmodeline] Modeline 74:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.538338] [drm:drm_mode_debug_printmodeline] Modeline 67:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.538339] [drm:drm_mode_debug_printmodeline] Modeline 69:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    1.538340] [drm:drm_mode_debug_printmodeline] Modeline 65:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    1.538341] [drm:drm_mode_debug_printmodeline] Modeline 88:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    1.538342] [drm:drm_mode_debug_printmodeline] Modeline 75:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    1.538343] [drm:drm_mode_debug_printmodeline] Modeline 76:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.538344] [drm:drm_mode_debug_printmodeline] Modeline 77:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    1.538345] [drm:drm_mode_debug_printmodeline] Modeline 70:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.538346] [drm:drm_mode_debug_printmodeline] Modeline 89:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
>[    1.538347] [drm:drm_mode_debug_printmodeline] Modeline 66:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    1.538347] [drm:drm_mode_debug_printmodeline] Modeline 71:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    1.538348] [drm:drm_mode_debug_printmodeline] Modeline 90:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.538349] [drm:drm_mode_debug_printmodeline] Modeline 72:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.538350] [drm:drm_mode_debug_printmodeline] Modeline 73:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    1.538351] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1]
>[    1.538351] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1]
>[    1.538424] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    1.538425] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    1.538486] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    1.538487] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.538549] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    1.538550] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    1.540571] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    1.540572] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected
>[    1.540573] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2]
>[    1.540573] [drm:intel_dp_detect] [CONNECTOR:54:DP-2]
>[    1.540829] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00
>[    1.542982] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no
>[    1.542983] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    1.542983] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    1.542984] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    1.545170] [drm:intel_dp_probe_oui] Sink OUI: 00e04c
>[    1.545402] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    1.547600] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.547604] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] probed modes :
>[    1.547605] [drm:drm_mode_debug_printmodeline] Modeline 79:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    1.547606] [drm:drm_mode_debug_printmodeline] Modeline 82:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
>[    1.547607] [drm:drm_mode_debug_printmodeline] Modeline 92:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.547608] [drm:drm_mode_debug_printmodeline] Modeline 81:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.547609] [drm:drm_mode_debug_printmodeline] Modeline 80:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    1.547610] [drm:drm_mode_debug_printmodeline] Modeline 93:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    1.547610] [drm:drm_mode_debug_printmodeline] Modeline 94:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.547611] [drm:drm_mode_debug_printmodeline] Modeline 95:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    1.547612] [drm:drm_mode_debug_printmodeline] Modeline 83:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.547613] [drm:drm_mode_debug_printmodeline] Modeline 84:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    1.547614] [drm:drm_mode_debug_printmodeline] Modeline 85:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.547615] [drm:drm_mode_debug_printmodeline] Modeline 91:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    1.547616] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2]
>[    1.547616] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2]
>[    1.547680] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    1.547680] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    1.547742] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    1.547743] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.547800] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    1.547800] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    1.549789] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    1.549790] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected
>[    1.549793] [drm:drm_setup_crtcs] 
>[    1.549794] [drm:drm_enable_connectors] connector 39 enabled? yes
>[    1.549795] [drm:drm_enable_connectors] connector 47 enabled? yes
>[    1.549795] [drm:drm_enable_connectors] connector 51 enabled? no
>[    1.549795] [drm:drm_enable_connectors] connector 54 enabled? yes
>[    1.549796] [drm:drm_enable_connectors] connector 58 enabled? no
>[    1.549797] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    1.549797] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    1.549798] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080
>[    1.549799] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1
>[    1.549799] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0
>[    1.549800] [drm:intel_fb_initial_config] connector DP-1 on pipe B [CRTC:31]: 1920x1200
>[    1.549800] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.549801] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-2
>[    1.549801] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-2 0
>[    1.549802] [drm:intel_fb_initial_config] connector DP-2 on pipe C [CRTC:36]: 1920x1080
>[    1.549802] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    1.549803] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    1.549804] [drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 31 (0,0)
>[    1.549805] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 36 (0,0)
>[    1.549819] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0
>[    1.549820] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4
>[    1.549821] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8
>[    1.549878] [drm:drm_fb_helper_hotplug_event] 
>[    1.549878] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1]
>[    1.549879] [drm:intel_dp_detect] [CONNECTOR:39:eDP-1]
>[    1.549976] [drm:intel_dp_probe_oui] Sink OUI: 001cf8
>[    1.550068] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    1.550168] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.550169] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:eDP-1] probed modes :
>[    1.550170] [drm:drm_mode_debug_printmodeline] Modeline 40:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[    1.550171] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1]
>[    1.550172] [drm:intel_dp_detect] [CONNECTOR:47:DP-1]
>[    1.553205] [drm:intel_dp_get_dpcd] DPCD: 12 14 c4 01 01 15 00 01 00 00 04 00 0f 00 00
>[    1.553296] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink yes
>[    1.553297] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    1.553297] [drm:intel_dp_print_rates] sink rates: 162000, 270000, 540000
>[    1.553298] [drm:intel_dp_print_rates] common rates: 162000, 270000, 540000
>[    1.553503] [drm:intel_dp_probe_mst] Sink is not MST capable
>[    1.556540] [drm:drm_edid_to_eld] ELD monitor DELL 2408WFP
>[    1.556541] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0
>[    1.556542] [drm:drm_edid_to_eld] ELD size 36, SAD count 1
>[    1.556550] [drm:drm_mode_debug_printmodeline] Modeline 122:"720x480i" 0 13500 720 739 801 858 480 488 494 525 0x40 0x101a
>[    1.556550] [drm:drm_mode_prune_invalid] Not using 720x480i mode: H_ILLEGAL
>[    1.556551] [drm:drm_mode_debug_printmodeline] Modeline 123:"720x576i" 0 13500 720 732 795 864 576 580 586 625 0x40 0x101a
>[    1.556551] [drm:drm_mode_prune_invalid] Not using 720x576i mode: H_ILLEGAL
>[    1.556552] [drm:drm_mode_debug_printmodeline] Modeline 135:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a
>[    1.556553] [drm:drm_mode_prune_invalid] Not using 720x480i mode: H_ILLEGAL
>[    1.556554] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:47:DP-1] probed modes :
>[    1.556555] [drm:drm_mode_debug_printmodeline] Modeline 62:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    1.556556] [drm:drm_mode_debug_printmodeline] Modeline 63:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[    1.556557] [drm:drm_mode_debug_printmodeline] Modeline 86:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[    1.556558] [drm:drm_mode_debug_printmodeline] Modeline 64:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[    1.556559] [drm:drm_mode_debug_printmodeline] Modeline 87:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
>[    1.556560] [drm:drm_mode_debug_printmodeline] Modeline 68:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    1.556561] [drm:drm_mode_debug_printmodeline] Modeline 74:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.556562] [drm:drm_mode_debug_printmodeline] Modeline 67:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.556562] [drm:drm_mode_debug_printmodeline] Modeline 69:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    1.556563] [drm:drm_mode_debug_printmodeline] Modeline 65:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    1.556564] [drm:drm_mode_debug_printmodeline] Modeline 88:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    1.556565] [drm:drm_mode_debug_printmodeline] Modeline 75:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    1.556566] [drm:drm_mode_debug_printmodeline] Modeline 76:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.556567] [drm:drm_mode_debug_printmodeline] Modeline 77:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    1.556568] [drm:drm_mode_debug_printmodeline] Modeline 70:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.556569] [drm:drm_mode_debug_printmodeline] Modeline 89:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
>[    1.556570] [drm:drm_mode_debug_printmodeline] Modeline 66:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    1.556571] [drm:drm_mode_debug_printmodeline] Modeline 71:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    1.556571] [drm:drm_mode_debug_printmodeline] Modeline 90:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.556572] [drm:drm_mode_debug_printmodeline] Modeline 72:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.556573] [drm:drm_mode_debug_printmodeline] Modeline 73:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    1.556574] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1]
>[    1.556574] [drm:intel_hdmi_detect] [CONNECTOR:51:HDMI-A-1]
>[    1.557573] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    1.557573] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    1.557635] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    1.557636] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.557697] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    1.557698] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    1.557759] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    1.557760] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:51:HDMI-A-1] disconnected
>[    1.557761] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2]
>[    1.557761] [drm:intel_dp_detect] [CONNECTOR:54:DP-2]
>[    1.558020] [drm:intel_dp_get_dpcd] DPCD: 11 0a 84 01 01 00 01 80 02 00 00 00 00 00 00
>[    1.558242] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no
>[    1.558243] [drm:intel_dp_print_rates] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    1.558244] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    1.558244] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    1.558471] [drm:intel_dp_probe_oui] Sink OUI: 00e04c
>[    1.558698] [drm:intel_dp_probe_oui] Branch OUI: 000000
>[    1.558935] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.558938] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:54:DP-2] probed modes :
>[    1.558939] [drm:drm_mode_debug_printmodeline] Modeline 79:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    1.558940] [drm:drm_mode_debug_printmodeline] Modeline 82:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
>[    1.558941] [drm:drm_mode_debug_printmodeline] Modeline 92:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.558942] [drm:drm_mode_debug_printmodeline] Modeline 81:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.558943] [drm:drm_mode_debug_printmodeline] Modeline 80:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    1.558943] [drm:drm_mode_debug_printmodeline] Modeline 93:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    1.558944] [drm:drm_mode_debug_printmodeline] Modeline 94:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.558945] [drm:drm_mode_debug_printmodeline] Modeline 95:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    1.558946] [drm:drm_mode_debug_printmodeline] Modeline 83:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.558947] [drm:drm_mode_debug_printmodeline] Modeline 84:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    1.558948] [drm:drm_mode_debug_printmodeline] Modeline 85:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.558949] [drm:drm_mode_debug_printmodeline] Modeline 91:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    1.558949] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2]
>[    1.558950] [drm:intel_hdmi_detect] [CONNECTOR:58:HDMI-A-2]
>[    1.559013] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    1.559014] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    1.559075] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    1.559076] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.559128] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    1.559128] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    1.559190] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    1.559191] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:58:HDMI-A-2] disconnected
>[    1.559193] [drm:drm_setup_crtcs] 
>[    1.559194] [drm:drm_enable_connectors] connector 39 enabled? yes
>[    1.559194] [drm:drm_enable_connectors] connector 47 enabled? yes
>[    1.559194] [drm:drm_enable_connectors] connector 51 enabled? no
>[    1.559195] [drm:drm_enable_connectors] connector 54 enabled? yes
>[    1.559195] [drm:drm_enable_connectors] connector 58 enabled? no
>[    1.559196] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    1.559196] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    1.559197] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080
>[    1.559197] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-1
>[    1.559198] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-1 0
>[    1.559198] [drm:intel_fb_initial_config] connector DP-1 on pipe B [CRTC:31]: 1920x1200
>[    1.559199] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    1.559199] [drm:intel_fb_initial_config] looking for cmdline mode on connector DP-2
>[    1.559200] [drm:intel_fb_initial_config] looking for preferred mode on connector DP-2 0
>[    1.559200] [drm:intel_fb_initial_config] connector DP-2 on pipe C [CRTC:36]: 1920x1080
>[    1.559200] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    1.559201] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    1.559202] [drm:drm_setup_crtcs] desired mode 1920x1200 set on crtc 31 (0,0)
>[    1.559203] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 36 (0,0)
>[    1.559213] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0
>[    1.559214] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4
>[    1.559214] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8
>[    1.559279] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0
>[    1.559280] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4
>[    1.559280] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8
>[    1.563942] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    1.613850] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    1.635818] clocksource: timekeeping watchdog on CPU1: Marking clocksource 'tsc' as unstable because the skew is too large:
>[    1.635854] clocksource:                       'hpet' wd_now: 7bb5469 wd_last: 72c0bda mask: ffffffff
>[    1.635879] clocksource:                       'tsc' cs_now: c18d6d12c cs_last: bf6233bf4 mask: ffffffffffffffff
>[    1.647215] systemd[1]: Failed to insert module 'kdbus': Function not implemented
>[    1.662967] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
>[    1.664312] systemd[1]: Detected architecture x86-64.
>[    1.669278] systemd[1]: Set hostname to <gfx04x>.
>[    1.706520] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    1.709414] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    1.712283] systemd[1]: Created slice Root Slice.
>[    1.715127] systemd[1]: Listening on Journal Socket (/dev/log).
>[    1.717938] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    1.720760] systemd[1]: Listening on fsck to fsckd communication Socket.
>[    1.723593] systemd[1]: Listening on Journal Socket.
>[    1.726405] systemd[1]: Listening on udev Kernel Socket.
>[    1.729213] systemd[1]: Reached target Encrypted Volumes.
>[    1.732098] systemd[1]: Listening on Journal Audit Socket.
>[    1.734973] systemd[1]: Created slice User and Session Slice.
>[    1.737884] systemd[1]: Created slice System Slice.
>[    1.747635] systemd[1]: Mounting Huge Pages File System...
>[    1.751015] systemd[1]: Starting Uncomplicated firewall...
>[    1.754377] systemd[1]: Starting Setup Virtual Console...
>[    1.757728] systemd[1]: Started Read required files in advance.
>[    1.761241] systemd[1]: Mounting Debug File System...
>[    1.764919] systemd[1]: Starting Load Kernel Modules...
>[    1.767860] systemd[1]: Reached target Slices.
>[    1.770835] systemd[1]: Created slice system-getty.slice.
>[    1.771686] lp: driver loaded but no devices found
>[    1.773339] [drm] RC6 on
>[    1.775326] ppdev: user-space parallel port driver
>[    1.777911] systemd[1]: Starting Increase datagram queue length...
>[    1.781613] systemd[1]: Starting Create list of required static device nodes for the current kernel...
>[    1.785013] systemd[1]: Started Braille Device Support.
>[    1.788485] systemd[1]: Mounting POSIX Message Queue File System...
>[    1.791349] systemd[1]: Reached target Remote File Systems (Pre).
>[    1.794162] systemd[1]: Listening on udev Control Socket.
>[    1.797010] systemd[1]: Created slice system-systemd\x2dfsck.slice.
>[    1.811388] systemd[1]: Starting udev Coldplug all Devices...
>[    1.814917] systemd[1]: Mounted Huge Pages File System.
>[    1.817811] systemd[1]: Mounted POSIX Message Queue File System.
>[    1.820528] systemd[1]: Mounted Debug File System.
>[    1.823226] systemd[1]: Started Uncomplicated firewall.
>[    1.825741] systemd[1]: Started Setup Virtual Console.
>[    1.828455] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED
>[    1.829763] systemd[1]: ureadahead.service: Unit entered failed state.
>[    1.830887] systemd[1]: ureadahead.service: Failed with result 'exit-code'.
>[    1.832162] systemd[1]: Started Load Kernel Modules.
>[    1.834911] systemd[1]: Started Increase datagram queue length.
>[    1.837593] systemd[1]: Started Create list of required static device nodes for the current kernel.
>[    1.863021] systemd[1]: Starting Create Static Device Nodes in /dev...
>[    1.865817] systemd[1]: Listening on Syslog Socket.
>[    1.869056] systemd[1]: Starting Journal Service...
>[    1.872206] systemd[1]: Mounting FUSE Control File System...
>[    1.875330] systemd[1]: Starting Apply Kernel Variables...
>[    1.878463] systemd[1]: Mounted FUSE Control File System.
>[    1.880193] systemd[1]: Started udev Coldplug all Devices.
>[    1.881872] systemd[1]: Started Create Static Device Nodes in /dev.
>[    1.883578] systemd[1]: Started Apply Kernel Variables.
>[    1.897488] systemd[1]: Starting udev Kernel Device Manager...
>[    1.907704] systemd[1]: Started Journal Service.
>[    1.926956] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>[    1.938796] systemd-journald[269]: Received request to flush runtime journal from PID 1
>[    1.959959] pmc-ipc-plat INT34D2:00: io res: [io  0x0400-0x047f]
>[    1.959962] pmc-ipc-plat INT34D2:00: punit BIOS data res: [mem 0xfed17080-0xfed17083]
>[    1.959963] pmc-ipc-plat INT34D2:00: punit BIOS interface res: [mem 0xfed17084-0xfed17087]
>[    1.959970] pmc-ipc-plat INT34D2:00: ipc res: [mem 0xfe042000-0xfe043fff]
>[    1.959971] pmc-ipc-plat INT34D2:00: telemetry ssram res: [mem 0xd1004000-0xd1005fff]
>[    1.977499] rfkill_gpio BCM4752:00: invalid platform data
>[    1.989565] rfkill_gpio: probe of BCM4752:00 failed with error -22
>[    1.992018] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    1.997873] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=4800/96000
>[    1.997876] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4800
>[    2.042412] Adding 4121596k swap on /dev/sda3.  Priority:-1 extents:1 across:4121596k SSFS
>[    2.072296] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[    2.087918] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[    2.087919] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    2.087920] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[    2.087921] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[    2.087921] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[    2.087922] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
>[    2.097567] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
>[    2.097611] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
>[    2.097653] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
>[    2.097691] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input12
>[    2.097726] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input13
>[    2.119913] SSE version of gcm_enc/dec engaged.
>[    2.149379] intel_rapl: Found RAPL domain package
>[    2.149383] intel_rapl: Found RAPL domain core
>[    2.149384] intel_rapl: Found RAPL domain uncore
>[    2.149386] intel_rapl: Found RAPL domain dram
>[    2.154070] random: nonblocking pool is initialized
>[    2.161878] audit: type=1400 audit(1463536987.311:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=505 comm="apparmor_parser"
>[    2.161882] audit: type=1400 audit(1463536987.311:3): apparmor="STATUS" operation="profile_load" name="chromium" pid=505 comm="apparmor_parser"
>[    2.163574] audit: type=1400 audit(1463536987.311:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=505 comm="apparmor_parser"
>[    2.163579] audit: type=1400 audit(1463536987.311:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=505 comm="apparmor_parser"
>[    2.163581] audit: type=1400 audit(1463536987.311:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=505 comm="apparmor_parser"
>[    2.163584] audit: type=1400 audit(1463536987.311:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=505 comm="apparmor_parser"
>[    2.165689] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[    2.165692] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
>[    2.172537] audit: type=1400 audit(1463536987.343:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=505 comm="apparmor_parser"
>[    2.172541] audit: type=1400 audit(1463536987.343:9): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=505 comm="apparmor_parser"
>[    2.172544] audit: type=1400 audit(1463536987.343:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=505 comm="apparmor_parser"
>[    2.178038] intel_rapl: Found RAPL domain package
>[    2.178042] intel_rapl: Found RAPL domain core
>[    2.178044] intel_rapl: Found RAPL domain uncore
>[    2.178046] intel_rapl: Found RAPL domain dram
>[    2.223718] dw-apb-uart.8: ttyS4 at MMIO 0x9242d000 (irq = 4, base_baud = 115200) is a 16550A
>[    2.254419] dw-apb-uart.9: ttyS5 at MMIO 0x9242e000 (irq = 5, base_baud = 115200) is a 16550A
>[    2.281464] dw-apb-uart.10: ttyS6 at MMIO 0x9242f000 (irq = 6, base_baud = 115200) is a 16550A
>[    2.308151] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration
>[    2.309144] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration
>[    2.310131] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration
>[    2.311169] i2c_designware i2c_designware.3: i2c_dw_handle_tx_abort: lost arbitration
>[    2.311235] dw-apb-uart.11: ttyS7 at MMIO 0x92430000 (irq = 7, base_baud = 115200) is a 16550A
>[    2.312091] i2c_hid i2c-ELAN221D:00: hid_descr_cmd failed
>[    2.400639] i2c_hid i2c-ALPS0001:00: hid_descr_cmd failed
>[    2.638587] asix 1-4:1.0 eth0: register 'asix' at usb-0000:00:15.0-4, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:31:c2:aa
>[    2.638608] usbcore: registered new interface driver asix
>[    2.641349] asix 1-4:1.0 enx00106031c2aa: renamed from eth0
>[    2.673688] asix 1-4:1.0 enx00106031c2aa: link down
>[    2.673937] IPv6: ADDRCONF(NETDEV_UP): enx00106031c2aa: link is not ready
>[    3.135766] IPv6: ADDRCONF(NETDEV_CHANGE): enx00106031c2aa: link becomes ready
>[    3.135899] asix 1-4:1.0 enx00106031c2aa: link up, 100Mbps, full-duplex, lpa 0xC5E1
>[    3.452509] cgroup: new mount options do not match the existing superblock, will be ignored
>[    3.506042] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[    3.528973] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[    5.651914] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23] scaler_user index 0.0
>[    5.651915] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:29] scaler_user index 1.4
>[    5.651915] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:34] scaler_user index 2.8

Actions: View

Attachments on bug 95469: 123863 | 124129 | 124130

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.