Attachment 124794 Details for Bug 96645 – dmesg with drm.debug=14

dmesg with drm.debug=14

dmesg-drm (text/plain), 101.08 KB, created by Gabriele Mazzotta on 2016-06-30 09:36:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gabriele Mazzotta

Created: 2016-06-30 09:36:57 UTC

Size: 101.08 KB

patch

obsolete

>[    0.000000] Linux version 4.7.0-rc5-00066-g0f172b0 (gabri@xps13) (gcc version 5.4.0 20160609 (Debian 5.4.0-4) ) #1 SMP Mon Jun 27 11:27:02 CEST 2016
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-rc5-00066-g0f172b0 root=/dev/sda6 ro quiet rootfstype=ext4 resume=/dev/sda3 possible_cpus=4 i915.lvds_downclock=1 workqueue.power_efficient drm.debug=14
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
>[    0.000000] x86/fpu: Using 'eager' FPU context switches.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000bffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008034bfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000008034c000-0x000000008054dfff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000008054e000-0x00000000dad7dfff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000dad7e000-0x00000000daf7dfff] type 20
>[    0.000000] BIOS-e820: [mem 0x00000000daf7e000-0x00000000dceb5fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000dceb6000-0x00000000dcf9efff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000dcf9f000-0x00000000dcffefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000dcffffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df9fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd.
>[    0.000000] efi:  ACPI=0xdcffe000  ACPI 2.0=0xdcffe014  SMBIOS=0xdcc0c000 
>[    0.000000] SMBIOS 2.7 present.
>[    0.000000] DMI: Dell Inc. XPS13 9333/0HP75V, BIOS A07 03/27/2015
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00E0000000 mask 7FE0000000 uncachable
>[    0.000000]   1 base 00DE000000 mask 7FFE000000 uncachable
>[    0.000000]   2 base 00DD000000 mask 7FFF000000 uncachable
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
>[    0.000000] e820: last_pfn = 0xdd000 max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0x02317000, 0x02317fff] PGTABLE
>[    0.000000] BRK [0x02318000, 0x02318fff] PGTABLE
>[    0.000000] BRK [0x02319000, 0x02319fff] PGTABLE
>[    0.000000] BRK [0x0231a000, 0x0231afff] PGTABLE
>[    0.000000] BRK [0x0231b000, 0x0231bfff] PGTABLE
>[    0.000000] BRK [0x0231c000, 0x0231cfff] PGTABLE
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000DCFFE014 000024 (v02 DELL  )
>[    0.000000] ACPI: XSDT 0x00000000DCFFE170 0000C4 (v01 DELL   QA09     00000002 LOHR 00000002)
>[    0.000000] ACPI: FACP 0x00000000DCFFB000 00010C (v05 DELL   QA09     00000002 LOHR 00000002)
>[    0.000000] ACPI: DSDT 0x00000000DCFE6000 010655 (v02 DELL   HSW-LPT  00000000 INTL 20120711)
>[    0.000000] ACPI: FACS 0x00000000DCF9C000 000040
>[    0.000000] ACPI: ASF! 0x00000000DCFFD000 0000A5 (v32 DELL   QA09     00000002 LOHR 00000002)
>[    0.000000] ACPI: HPET 0x00000000DCFFA000 000038 (v01 DELL   QA09     00000002 LOHR 00000002)
>[    0.000000] ACPI: LPIT 0x00000000DCFF9000 000094 (v01 DELL   QA09     00000002 LOHR 00000002)
>[    0.000000] ACPI: APIC 0x00000000DCFF8000 000098 (v01 DELL   QA09     00000002 LOHR 00000002)
>[    0.000000] ACPI: MCFG 0x00000000DCFF7000 00003C (v01 DELL   QA09     00000002 LOHR 00000002)
>[    0.000000] ACPI: SSDT 0x00000000DCFE5000 000228 (v01 DELL   sensrhub 00000000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000DCFE2000 002028 (v01 DELL   PtidDevc 00001000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000DCFE1000 000539 (v01 DELL   Cpu0Ist  00003000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000DCFE0000 000AD8 (v01 DELL   CpuPm    00003000 INTL 20120711)
>[    0.000000] ACPI: SSDT 0x00000000DCFDC000 003688 (v01 DELL   SaSsdt   00003000 INTL 20120711)
>[    0.000000] ACPI: UEFI 0x00000000DCFDB000 000042 (v01 DELL   QA09     00000002 LOHR 00000002)
>[    0.000000] ACPI: POAT 0x00000000DCF77000 000055 (v03 DELL   QA09     00000002 LOHR 00000002)
>[    0.000000] ACPI: BATB 0x00000000DCFDA000 000046 (v01 DELL   QA09     00000002 LOHR 00000002)
>[    0.000000] ACPI: FPDT 0x00000000DCFD9000 000064 (v01 DELL   QA09     00000002 LOHR 00000002)
>[    0.000000] ACPI: SLIC 0x00000000DCFD8000 000176 (v01 DELL   QA09     00000002 LOHR 00000002)
>[    0.000000] ACPI: UEFI 0x00000000DCFD7000 0002A6 (v01 DELL   QA09     00000002 LOHR 00000002)
>[    0.000000] ACPI: SSDT 0x00000000DCFD6000 0000D0 (v01 DELL   IffsAsl  00003000 INTL 20120711)
>[    0.000000] ACPI: BGRT 0x00000000DCFD5000 000038 (v01 DELL   QA09     00000002 LOHR 00000002)
>[    0.000000] ACPI: CSRT 0x00000000DCFD4000 0000C4 (v01 DELL   QA09     00000002 LOHR 00000002)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x21f5f8000-0x21f5fbfff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021f5fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
>[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009cfff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x000000008034bfff]
>[    0.000000]   node   0: [mem 0x000000008054e000-0x00000000dad7dfff]
>[    0.000000]   node   0: [mem 0x00000000dcfff000-0x00000000dcffffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021f5fffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021f5fffff]
>[    0.000000] On node 0 totalpages: 2072856
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 22 pages reserved
>[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 13934 pages used for memmap
>[    0.000000]   DMA32 zone: 891773 pages, LIFO batch:31
>[    0.000000]   Normal zone: 18392 pages used for memmap
>[    0.000000]   Normal zone: 1177088 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics stolen memory at 0xdda00000-0xdf9fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x000bffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x8034c000-0x8054dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdad7e000-0xdaf7dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdaf7e000-0xdceb5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdceb6000-0xdcf9efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdcf9f000-0xdcffefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfe100fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
>[    0.000000] e820: [mem 0xdfa00000-0xf80f7fff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] percpu: Embedded 34 pages/cpu @ffff88021f200000 s101016 r8192 d30056 u524288
>[    0.000000] pcpu-alloc: s101016 r8192 d30056 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2040444
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-rc5-00066-g0f172b0 root=/dev/sda6 ro quiet rootfstype=ext4 resume=/dev/sda3 possible_cpus=4 i915.lvds_downclock=1 workqueue.power_efficient drm.debug=14
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 8011712K/8291424K available (7136K kernel code, 964K rwdata, 2444K rodata, 1344K init, 812K bss, 279712K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
>[    0.000000] NR_IRQS:4352 nr_irqs:728 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2394.319 MHz processor
>[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.63 BogoMIPS (lpj=9577276)
>[    0.000032] pid_max: default: 32768 minimum: 301
>[    0.000037] ACPI: Core revision 20160422
>[    0.035347] Security Framework initialized
>[    0.035350] Yama: becoming mindful.
>[    0.035357] AppArmor: AppArmor disabled by boot time parameter
>[    0.035901] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.037313] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.037880] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.037891] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.038142] CPU: Physical Processor ID: 0
>[    0.038144] CPU: Processor Core ID: 0
>[    0.038149] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.038150] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.038154] mce: CPU supports 7 MCE banks
>[    0.038164] CPU0: Thermal monitoring enabled (TM1)
>[    0.038180] process: using mwait in idle threads
>[    0.038183] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
>[    0.038184] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
>[    0.038697] Freeing SMP alternatives memory: 28K (ffffffff81e43000 - ffffffff81e4a000)
>[    0.042615] ftrace: allocating 28493 entries in 112 pages
>[    0.055665] smpboot: Max logical packages: 4
>[    0.055667] smpboot: APIC(0) Converting physical 0 to logical package 0
>[    0.056268] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.095956] TSC deadline timer enabled
>[    0.095959] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (family: 0x6, model: 0x45, stepping: 0x1)
>[    0.095963] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
>[    0.095992] ... version:                3
>[    0.095993] ... bit width:              48
>[    0.095994] ... generic registers:      4
>[    0.095996] ... value mask:             0000ffffffffffff
>[    0.095997] ... max period:             0000ffffffffffff
>[    0.095998] ... fixed-purpose events:   3
>[    0.095999] ... event mask:             000000070000000f
>[    0.096250] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.096329] x86: Booting SMP configuration:
>[    0.096331] .... node  #0, CPUs:      #1 #2 #3
>[    0.338104] x86: Booted up 1 node, 4 CPUs
>[    0.338108] smpboot: Total of 4 processors activated (19159.15 BogoMIPS)
>[    0.343637] devtmpfs: initialized
>[    0.343700] x86/mm: Memory block size: 128MB
>[    0.346437] PM: Registering ACPI NVS region [mem 0xdceb6000-0xdcf9efff] (954368 bytes)
>[    0.346507] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.346539] pinctrl core: initialized pinctrl subsystem
>[    0.346636] NET: Registered protocol family 16
>[    0.355385] cpuidle: using governor ladder
>[    0.367389] cpuidle: using governor menu
>[    0.367453] ACPI: bus type PCI registered
>[    0.367455] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.367513] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.367516] PCI: not using MMCONFIG
>[    0.367517] PCI: Using configuration type 1 for base access
>[    0.367525] dmi type 0xB1 record - unknown flag
>[    0.367575] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
>[    0.379507] HugeTLB registered 1 GB page size, pre-allocated 0 pages
>[    0.379509] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.379702] ACPI: Added _OSI(Module Device)
>[    0.379703] ACPI: Added _OSI(Processor Device)
>[    0.379705] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.379706] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.389449] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.396126] ACPI: 7 ACPI AML tables successfully acquired and loaded
>
>[    0.401968] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.403082] ACPI: Dynamic OEM Table Load:
>[    0.403093] ACPI: SSDT 0xFFFF880215486800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
>[    0.403956] ACPI: Dynamic OEM Table Load:
>[    0.403966] ACPI: SSDT 0xFFFF880215B2A000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
>[    0.404869] ACPI: Dynamic OEM Table Load:
>[    0.404876] ACPI: SSDT 0xFFFF880215483000 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
>[    0.406315] ACPI : EC: EC started
>[    0.447524] ACPI: Interpreter enabled
>[    0.447558] ACPI: (supports S0 S1 S3 S4 S5)
>[    0.447560] ACPI: Using IOAPIC for interrupt routing
>[    0.447589] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.448133] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
>[    0.448142] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.461380] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.461386] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.461530] \_SB_.PCI0 (33DB4D5B-1FF7-401C-9657-7441C03DD766): _OSC invalid UUID
>[    0.461532] _OSC request data: 1 1f 0
>[    0.461536] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
>[    0.461971] PCI host bridge to bus 0000:00
>[    0.461974] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.461976] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.461978] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.461980] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
>[    0.461981] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
>[    0.461983] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
>[    0.461984] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
>[    0.461986] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
>[    0.461987] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
>[    0.461989] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
>[    0.461991] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
>[    0.461992] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
>[    0.461994] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
>[    0.461995] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
>[    0.461997] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
>[    0.461998] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
>[    0.462000] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.462009] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
>[    0.462211] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
>[    0.462224] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
>[    0.462232] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.462238] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.462427] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
>[    0.462438] pci 0000:00:03.0: reg 0x10: [mem 0xf0510000-0xf0513fff 64bit]
>[    0.462655] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
>[    0.462672] pci 0000:00:14.0: reg 0x10: [mem 0xf0500000-0xf050ffff 64bit]
>[    0.462734] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.462872] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.462915] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
>[    0.462934] pci 0000:00:16.0: reg 0x10: [mem 0xf0519000-0xf051901f 64bit]
>[    0.463007] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.463187] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
>[    0.463202] pci 0000:00:1b.0: reg 0x10: [mem 0xf0514000-0xf0517fff 64bit]
>[    0.463272] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.463410] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    0.463463] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
>[    0.463538] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.463720] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.463768] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
>[    0.463846] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.464022] pci 0000:00:1c.2: System wakeup disabled by ACPI
>[    0.464068] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
>[    0.464086] pci 0000:00:1d.0: reg 0x10: [mem 0xf051d000-0xf051d3ff]
>[    0.464175] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.464328] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.464370] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
>[    0.464648] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
>[    0.464662] pci 0000:00:1f.2: reg 0x10: [io  0x3088-0x308f]
>[    0.464669] pci 0000:00:1f.2: reg 0x14: [io  0x3094-0x3097]
>[    0.464676] pci 0000:00:1f.2: reg 0x18: [io  0x3080-0x3087]
>[    0.464683] pci 0000:00:1f.2: reg 0x1c: [io  0x3090-0x3093]
>[    0.464691] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
>[    0.464698] pci 0000:00:1f.2: reg 0x24: [mem 0xf051c000-0xf051c7ff]
>[    0.464736] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.464904] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
>[    0.464919] pci 0000:00:1f.3: reg 0x10: [mem 0xf0518000-0xf05180ff 64bit]
>[    0.464939] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.465178] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.465271] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
>[    0.465310] pci 0000:02:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
>[    0.465516] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    0.465576] pci 0000:02:00.0: System wakeup disabled by ACPI
>[    0.471482] pci 0000:00:1c.2: PCI bridge to [bus 02]
>[    0.471488] pci 0000:00:1c.2:   bridge window [mem 0xf0400000-0xf04fffff]
>[    0.472941] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.472999] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.473054] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.473107] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.473160] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.473212] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.473265] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.473317] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.473629] ACPI: Enabled 5 GPEs in block 00 to 7F
>[    0.473645] ACPI : EC: EC stopped
>[    0.473712] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
>[    0.473714] ACPI : EC: EC started
>[    0.515658] SCSI subsystem initialized
>[    0.515692] libata version 3.00 loaded.
>[    0.515773] PCI: Using ACPI for IRQ routing
>[    0.517154] PCI: pci_cache_line_size set to 64 bytes
>[    0.517218] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.517220] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
>[    0.517221] e820: reserve RAM buffer [mem 0x8034c000-0x83ffffff]
>[    0.517223] e820: reserve RAM buffer [mem 0xdad7e000-0xdbffffff]
>[    0.517224] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff]
>[    0.517226] e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
>[    0.517395] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.517401] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.519419] clocksource: Switched to clocksource hpet
>[    0.523177] VFS: Disk quotas dquot_6.6.0
>[    0.523192] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.523269] pnp: PnP ACPI init
>[    0.523415] system 00:00: [io  0x0680-0x069f] has been reserved
>[    0.523427] system 00:00: [io  0xffff] has been reserved
>[    0.523429] system 00:00: [io  0xffff] has been reserved
>[    0.523431] system 00:00: [io  0xffff] has been reserved
>[    0.523433] system 00:00: [io  0x1800-0x18fe] has been reserved
>[    0.523434] system 00:00: [io  0x164e-0x164f] has been reserved
>[    0.523438] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.523486] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.523533] system 00:02: [io  0x1854-0x1857] has been reserved
>[    0.523536] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.523576] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.523601] pnp 00:04: Plug and Play ACPI device, IDs SYN0608 PNP0f03 (active)
>[    0.523732] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.523735] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.523737] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.523738] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.523741] system 00:05: [mem 0xf8000000-0xfbffffff] could not be reserved
>[    0.523742] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.523744] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.523746] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.523748] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
>[    0.523750] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
>[    0.523752] system 00:05: [mem 0xdfa10000-0xdfa1ffff] has been reserved
>[    0.523755] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.524058] system 00:06: [mem 0xfe102000-0xfe102fff] has been reserved
>[    0.524060] system 00:06: [mem 0xfe104000-0xfe104fff] has been reserved
>[    0.524062] system 00:06: [mem 0xfe106000-0xfe106fff] has been reserved
>[    0.524065] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.524789] pnp: PnP ACPI: found 7 devices
>[    0.530939] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.530968] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.530982] pci 0000:00:1c.2: PCI bridge to [bus 02]
>[    0.530987] pci 0000:00:1c.2:   bridge window [mem 0xf0400000-0xf04fffff]
>[    0.530996] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.530998] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.531000] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.531002] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
>[    0.531003] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
>[    0.531005] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
>[    0.531006] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
>[    0.531008] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
>[    0.531010] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
>[    0.531011] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
>[    0.531013] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
>[    0.531014] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
>[    0.531016] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
>[    0.531018] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
>[    0.531019] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
>[    0.531021] pci_bus 0000:00: resource 19 [mem 0xdfa00000-0xfeafffff window]
>[    0.531023] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff]
>[    0.531047] NET: Registered protocol family 2
>[    0.531210] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.531346] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.531483] TCP: Hash tables configured (established 65536 bind 65536)
>[    0.531509] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.531536] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.531590] NET: Registered protocol family 1
>[    0.531602] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.531682] pci 0000:00:14.0: can't derive routing for PCI INT A
>[    0.531684] pci 0000:00:14.0: PCI INT A: not connected
>[    0.531894] PCI: CLS 64 bytes, default 64
>[    0.531935] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.531937] software IO TLB [mem 0xd6862000-0xda862000] (64MB) mapped at [ffff8800d6862000-ffff8800da861fff]
>[    0.531988] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
>[    0.531989] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>[    0.531990] RAPL PMU: hw unit of domain package 2^-14 Joules
>[    0.531991] RAPL PMU: hw unit of domain dram 2^-14 Joules
>[    0.531992] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>[    0.532319] simple-framebuffer simple-framebuffer.0: framebuffer at 0xe0000000, 0x7e9000 bytes, mapped to 0xffffc90001000000
>[    0.532322] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
>[    0.537722] Console: switching to colour frame buffer device 240x67
>[    0.543004] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
>[    0.543183] futex hash table entries: 1024 (order: 4, 65536 bytes)
>[    0.543199] audit: initializing netlink subsys (disabled)
>[    0.543209] audit: type=2000 audit(1467285889.500:1): initialized
>[    0.543519] workingset: timestamp_bits=54 max_order=21 bucket_order=0
>[    0.546793] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    0.546819] io scheduler noop registered
>[    0.546821] io scheduler deadline registered (default)
>[    0.546846] io scheduler cfq registered
>[    0.547139] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.547145] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.547159] intel_idle: MWAIT substates: 0x11142120
>[    0.547160] intel_idle: v0.4.1 model 0x45
>[    0.547394] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.547472] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>[    0.547476] ACPI: Power Button [PWRB]
>[    0.547515] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>[    0.547944] ACPI: Lid Switch [LID0]
>[    0.547989] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    0.547992] ACPI: Power Button [PWRF]
>[    0.548184] GHES: HEST is not enabled!
>[    0.548231] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.548730] Linux agpgart interface v0.103
>[    0.548755] [drm] Initialized drm 1.1.0 20060810
>[    0.549215] [drm:intel_detect_pch] Found LynxPoint LP PCH
>[    0.549218] [drm:get_allowed_dc_mask] Allowed DC state mask 00
>[    0.549248] [drm:i915_dump_device_info] i915 device info: gen=7, pciid=0x0a16 rev=0x09 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    0.549294] [drm:intel_device_info_runtime_init] slice total: 0
>[    0.549295] [drm:intel_device_info_runtime_init] subslice total: 0
>[    0.549297] [drm:intel_device_info_runtime_init] subslice per slice: 0
>[    0.549298] [drm:intel_device_info_runtime_init] EU total: 0
>[    0.549299] [drm:intel_device_info_runtime_init] EU per subslice: 0
>[    0.549300] [drm:intel_device_info_runtime_init] has slice power gating: n
>[    0.549302] [drm:intel_device_info_runtime_init] has subslice power gating: n
>[    0.549303] [drm:intel_device_info_runtime_init] has EU power gating: n
>[    0.549350] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 32768K, usable: 31744K
>[    0.549351] [drm] Memory usable by graphics device = 2048M
>[    0.549353] [drm:i915_ggtt_init_hw] GMADR size = 256M
>[    0.549354] [drm:i915_ggtt_init_hw] GTT stolen size = 32M
>[    0.549355] [drm:i915_ggtt_init_hw] ppgtt mode: 1
>[    0.549357] checking generic (e0000000 7e9000) vs hw (e0000000 10000000)
>[    0.549359] fb: switching to inteldrmfb from simple
>[    0.549380] Console: switching to colour dummy device 80x25
>[    0.549428] [drm] Replacing VGA console driver
>[    0.549448] [drm:intel_opregion_setup] graphic opregion physical addr: 0xdcf78018
>[    0.549453] [drm:intel_opregion_setup] Public ACPI methods supported
>[    0.549454] [drm:intel_opregion_setup] SWSCI supported
>[    0.555475] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    0.555478] [drm:intel_opregion_setup] ASLE supported
>[    0.555479] [drm:intel_opregion_setup] ASLE extension supported
>[    0.555481] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    0.555523] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    0.555524] [drm] Driver supports precise vblank timestamp query.
>[    0.555526] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    0.555527] [drm:intel_bios_init] VBT signature "$VBT HASWELL        ", BDB version 177
>[    0.555530] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    0.555532] [drm:parse_general_definitions] crt_ddc_bus_pin: 0
>[    0.557593] [drm:parse_lfp_panel_data] Panel type: 0 (OpRegion)
>[    0.557597] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    0.557601] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    0.557604] [drm:drm_mode_debug_printmodeline] Modeline 0:"640x480" 0 25180 640 648 744 784 480 482 484 509 0x8 0xa
>[    0.557606] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[    0.557608] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 10000 Hz, active high, min brightness 0, level 255
>[    0.557610] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    0.557613] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    0.557614] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    0.557617] [drm:parse_driver_features] DRRS State Enabled:0
>[    0.557619] [drm:parse_ddi_port] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    0.557621] [drm:parse_ddi_port] VBT HDMI level shift for port A: 0
>[    0.557623] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    0.557624] [drm:parse_ddi_port] VBT HDMI level shift for port C: 6
>[    0.557637] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    0.557641] [drm:intel_power_well_enable] enabling always-on
>[    0.557643] [drm:intel_power_well_enable] enabling display
>[    0.557893] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    0.557895] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec)
>[    0.557897] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec)
>[    0.557898] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec)
>[    0.557899] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    0.557901] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    0.557903] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec)
>[    0.557904] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec)
>[    0.557905] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec)
>[    0.557907] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    0.557908] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    0.557910] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec)
>[    0.557911] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec)
>[    0.557912] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec)
>[    0.557914] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    0.557915] [drm:intel_modeset_init] 3 display pipes available.
>[    0.557932] [drm:intel_update_rawclk] rawclk rate: 24000 kHz
>[    0.557934] [drm:intel_update_cdclk] Current CD clock rate: 450000 kHz
>[    0.557936] [drm:intel_update_max_cdclk] Max CD clock rate: 450000 kHz
>[    0.557937] [drm:intel_update_max_cdclk] Max dotclock rate: 450000 kHz
>[    0.558245] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    0.558292] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[    0.558294] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    0.558296] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    0.558297] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    0.558300] [drm:intel_dp_aux_init] registering DPDDC-A bus for card0-eDP-1
>[    0.558320] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    0.558327] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    0.558743] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00
>[    0.559341] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no
>[    0.559344] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
>[    0.559346] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    0.559348] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    0.559356] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    0.565146] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    0.565148] [drm:intel_dp_drrs_init] VBT doesn't support DRRS
>[    0.565154] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 937/937
>[    0.565168] [drm:intel_dp_init_connector] Adding DP connector on port C
>[    0.565197] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1
>[    0.565222] [drm:intel_hdmi_init_connector] Adding HDMI connector on port C
>[    0.571390] [drm:intel_modeset_readout_hw_state] [CRTC:26] hw state readout: enabled
>[    0.571394] [drm:intel_modeset_readout_hw_state] [CRTC:30] hw state readout: disabled
>[    0.571397] [drm:intel_modeset_readout_hw_state] [CRTC:34] hw state readout: disabled
>[    0.571400] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[    0.571401] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[    0.571404] [drm:intel_modeset_readout_hw_state] SPLL hw state readout: crtc_mask 0x00000000, on 0
>[    0.571405] [drm:intel_modeset_readout_hw_state] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1
>[    0.571406] [drm:intel_modeset_readout_hw_state] LCPLL 1350 hw state readout: crtc_mask 0x00000001, on 1
>[    0.571408] [drm:intel_modeset_readout_hw_state] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1
>[    0.571413] [drm:intel_ddi_get_config] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
>[    0.571415] [drm:intel_modeset_readout_hw_state] [ENCODER:36:TMDS-36] hw state readout: enabled, pipe A
>[    0.571417] [drm:intel_modeset_readout_hw_state] [ENCODER:45:TMDS-45] hw state readout: disabled, pipe A
>[    0.571418] [drm:intel_modeset_readout_hw_state] [ENCODER:47:DP MST-47] hw state readout: disabled, pipe A
>[    0.571431] [drm:intel_modeset_readout_hw_state] [ENCODER:48:DP MST-48] hw state readout: disabled, pipe B
>[    0.571433] [drm:intel_modeset_readout_hw_state] [ENCODER:49:DP MST-49] hw state readout: disabled, pipe C
>[    0.571437] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:eDP-1] hw state readout: enabled
>[    0.571440] [drm:intel_modeset_readout_hw_state] [CONNECTOR:46:DP-1] hw state readout: disabled
>[    0.571442] [drm:intel_modeset_readout_hw_state] [CONNECTOR:50:HDMI-A-1] hw state readout: disabled
>[    0.571454] [drm:intel_dump_pipe_config] [CRTC:26][setup_hw_state] config ffff880215bb2000 for pipe A
>[    0.571455] [drm:intel_dump_pipe_config] cpu_transcoder: EDP
>[    0.571457] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    0.571459] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    0.571461] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    0.571463] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    0.571464] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    0.571465] [drm:intel_dump_pipe_config] requested mode:
>[    0.571468] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138779 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0x9
>[    0.571469] [drm:intel_dump_pipe_config] adjusted mode:
>[    0.571471] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138779 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0x9
>[    0.571474] [drm:intel_dump_crtc_timings] crtc timings: 138779 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x40 flags: 0x9
>[    0.571475] [drm:intel_dump_pipe_config] port clock: 270000
>[    0.571476] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    0.571478] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    0.571479] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    0.571481] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    0.571482] [drm:intel_dump_pipe_config] ips: 0
>[    0.571483] [drm:intel_dump_pipe_config] double wide: 0
>[    0.571485] [drm:intel_dump_pipe_config] ddi_pll_sel: 0x20000000; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    0.571486] [drm:intel_dump_pipe_config] planes on this crtc
>[    0.571488] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 disabled, scaler_id = 0
>[    0.571490] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[    0.571491] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    0.571493] [drm:intel_dump_pipe_config] [CRTC:30][setup_hw_state] config ffff880215bb3000 for pipe B
>[    0.571495] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    0.571496] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    0.571498] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    0.571499] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    0.571501] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    0.571502] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    0.571503] [drm:intel_dump_pipe_config] requested mode:
>[    0.571505] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    0.571507] [drm:intel_dump_pipe_config] adjusted mode:
>[    0.571509] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    0.571511] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    0.571512] [drm:intel_dump_pipe_config] port clock: 0
>[    0.571513] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    0.571514] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    0.571516] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    0.571517] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    0.571518] [drm:intel_dump_pipe_config] ips: 0
>[    0.571519] [drm:intel_dump_pipe_config] double wide: 0
>[    0.571521] [drm:intel_dump_pipe_config] ddi_pll_sel: 0x0; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    0.571522] [drm:intel_dump_pipe_config] planes on this crtc
>[    0.571524] [drm:intel_dump_pipe_config] STANDARD PLANE:28 plane: 1.0 idx: 3 disabled, scaler_id = 0
>[    0.571525] [drm:intel_dump_pipe_config] CURSOR PLANE:29 plane: 1.2 idx: 4 disabled, scaler_id = 0
>[    0.571527] [drm:intel_dump_pipe_config] STANDARD PLANE:31 plane: 1.1 idx: 5 disabled, scaler_id = 0
>[    0.571529] [drm:intel_dump_pipe_config] [CRTC:34][setup_hw_state] config ffff880215bb4000 for pipe C
>[    0.571530] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    0.571531] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    0.571533] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    0.571535] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    0.571536] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    0.571538] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    0.571539] [drm:intel_dump_pipe_config] requested mode:
>[    0.571541] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    0.571542] [drm:intel_dump_pipe_config] adjusted mode:
>[    0.571544] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    0.571545] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    0.571547] [drm:intel_dump_pipe_config] port clock: 0
>[    0.571548] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    0.571549] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    0.571551] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    0.571552] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    0.571553] [drm:intel_dump_pipe_config] ips: 0
>[    0.571554] [drm:intel_dump_pipe_config] double wide: 0
>[    0.571555] [drm:intel_dump_pipe_config] ddi_pll_sel: 0x0; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    0.571557] [drm:intel_dump_pipe_config] planes on this crtc
>[    0.571558] [drm:intel_dump_pipe_config] STANDARD PLANE:32 plane: 2.0 idx: 6 disabled, scaler_id = 0
>[    0.571560] [drm:intel_dump_pipe_config] CURSOR PLANE:33 plane: 2.3 idx: 7 disabled, scaler_id = 0
>[    0.571561] [drm:intel_dump_pipe_config] STANDARD PLANE:35 plane: 2.1 idx: 8 disabled, scaler_id = 0
>[    0.571563] [drm:intel_modeset_setup_hw_state] LCPLL 810 enabled but not in use, disabling
>[    0.571564] [drm:intel_modeset_setup_hw_state] LCPLL 2700 enabled but not in use, disabling
>[    0.571571] [drm:intel_power_well_disable] disabling display
>[    0.571573] [drm:hsw_set_power_well] Requesting to disable the power well
>[    0.571577] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    0.571579] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    0.571585] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    0.571588] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff8800d0048000
>[    0.571673] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 7e9000
>[    0.571674] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [7e9000, 7ffff000]
>[    0.573252] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
>[    0.574086] [drm:i915_gem_context_init] HW context support initialized
>[    0.574094] [drm:init_status_page] render ring hws offset: 0x007fa000
>[    0.574139] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0081b000
>[    0.574146] [drm:init_status_page] bsd ring hws offset: 0x0081c000
>[    0.574189] [drm:init_status_page] blitter ring hws offset: 0x0083d000
>[    0.574228] [drm:init_status_page] video enhancement ring hws offset: 0x0085e000
>[    0.575565] [drm:intel_update_cdclk] Current CD clock rate: 450000 kHz
>[    0.575636] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered
>[    0.575639] [drm:intel_fbdev_init_bios] found possible fb from plane A
>[    0.575640] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping
>[    0.575641] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping
>[    0.575642] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb
>[    0.575644] [drm:intel_fbdev_init_bios] pipe A area: 1920x1080, bpp: 32, size: 8294400
>[    0.575646] [drm:intel_fbdev_init_bios] fb big enough for plane A (8294400 >= 8294400)
>[    0.575647] [drm:intel_fbdev_init_bios] pipe B not active, skipping
>[    0.575648] [drm:intel_fbdev_init_bios] pipe C not active, skipping
>[    0.575650] [drm:intel_fbdev_init_bios] using BIOS fb for initial console
>[    0.575684] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1]
>[    0.575688] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1]
>[    0.576471] [drm:intel_didl_outputs] More than 15 outputs detected via ACPI
>[    0.579169] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    0.579480] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
>[    0.579504] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0
>[    0.579855] ahci 0000:00:1f.2: version 3.0
>[    0.590085] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x4 impl SATA mode
>[    0.590091] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    0.590577] scsi host0: ahci
>[    0.590710] scsi host1: ahci
>[    0.590827] scsi host2: ahci
>[    0.590933] scsi host3: ahci
>[    0.590986] ata1: DUMMY
>[    0.590987] ata2: DUMMY
>[    0.590991] ata3: SATA max UDMA/133 abar m2048@0xf051c000 port 0xf051c200 irq 41
>[    0.590992] ata4: DUMMY
>[    0.591071] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>[    0.596044] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.596049] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    0.596156] mousedev: PS/2 mouse device common for all mice
>[    0.596318] rtc_cmos 00:01: RTC can wake from S4
>[    0.596471] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>[    0.596500] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    0.596567] intel_pstate: Intel P-state driver initializing
>[    0.596736] EFI Variables Facility v0.08 2004-May-17
>[    0.600996] [drm:drm_dp_dpcd_access] too many retries, giving up
>[    0.601007] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] status updated from unknown to connected
>[    0.601125] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    0.601136] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes :
>[    0.601147] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9
>[    0.601155] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 111020 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0x9
>[    0.601160] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1]
>[    0.601251] [drm:intel_dp_detect] [CONNECTOR:46:DP-1]
>[    0.601259] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] status updated from unknown to disconnected
>[    0.601265] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] disconnected
>[    0.601270] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1]
>[    0.601276] [drm:intel_hdmi_detect] [CONNECTOR:50:HDMI-A-1]
>[    0.603445] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>[    0.609367] pstore: Registered efi as persistent store backend
>[    0.609442] intel_rapl: Found RAPL domain package
>[    0.609446] intel_rapl: Found RAPL domain core
>[    0.609448] intel_rapl: Found RAPL domain uncore
>[    0.609451] intel_rapl: Found RAPL domain dram
>[    0.609988] NET: Registered protocol family 10
>[    0.610332] mip6: Mobile IPv6
>[    0.610337] NET: Registered protocol family 17
>[    0.610342] mpls_gso: MPLS GSO support
>[    0.610695] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
>[    0.610712] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
>[    0.610731] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
>[    0.610750] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
>[    0.610853] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    0.611083] registered taskstats version 1
>[    0.611393] Key type encrypted registered
>[    0.611985] rtc_cmos 00:01: setting system clock to 2016-06-30 11:24:50 UTC (1467285890)
>[    0.611989] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>[    0.611991] EDD information not available.
>[    0.612122] PM: Checking hibernation image partition /dev/sda3
>[    0.727469] [drm:intel_hdmi_detect] HDMI live status down
>[    0.727476] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] status updated from unknown to disconnected
>[    0.727481] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] disconnected
>[    0.727484] [drm:drm_setup_crtcs] 
>[    0.727487] [drm:drm_enable_connectors] connector 37 enabled? yes
>[    0.727489] [drm:drm_enable_connectors] connector 46 enabled? no
>[    0.727491] [drm:drm_enable_connectors] connector 50 enabled? no
>[    0.727494] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    0.727496] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    0.727498] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080
>[    0.727500] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    0.727501] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    0.727504] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    0.727507] [drm:intelfb_create] re-using BIOS fb
>[    0.727531] [drm:intelfb_create] allocated 1920x1080 fb: 0x00000000, bo ffff8800d0048000
>[    0.727572] [drm:drm_fb_helper_hotplug_event] 
>[    0.727574] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1]
>[    0.727576] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1]
>[    0.727632] fbcon: inteldrmfb (fb0) is primary device
>[    0.727942] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    0.727946] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes :
>[    0.727949] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9
>[    0.727951] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 111020 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0x9
>[    0.727952] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1]
>[    0.727952] [drm:intel_dp_detect] [CONNECTOR:46:DP-1]
>[    0.727956] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] disconnected
>[    0.727957] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1]
>[    0.727958] [drm:intel_hdmi_detect] [CONNECTOR:50:HDMI-A-1]
>[    0.855509] [drm:intel_hdmi_detect] HDMI live status down
>[    0.855514] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] disconnected
>[    0.855522] [drm:drm_setup_crtcs] 
>[    0.855525] [drm:drm_enable_connectors] connector 37 enabled? yes
>[    0.855526] [drm:drm_enable_connectors] connector 46 enabled? no
>[    0.855526] [drm:drm_enable_connectors] connector 50 enabled? no
>[    0.855529] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    0.855530] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    0.855532] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080
>[    0.855533] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    0.855534] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    0.855536] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    0.855566] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[    0.855567] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24
>[    0.855571] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz
>[    0.855578] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24
>[    0.855579] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[    0.855581] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[    0.855584] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff8800d03d6000 for pipe A
>[    0.855585] [drm:intel_dump_pipe_config] cpu_transcoder: EDP
>[    0.855585] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    0.855587] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    0.855589] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[    0.855590] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    0.855591] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    0.855591] [drm:intel_dump_pipe_config] requested mode:
>[    0.855594] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9
>[    0.855595] [drm:intel_dump_pipe_config] adjusted mode:
>[    0.855597] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9
>[    0.855598] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0x9
>[    0.855599] [drm:intel_dump_pipe_config] port clock: 270000
>[    0.855600] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    0.855601] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    0.855602] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    0.855603] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    0.855604] [drm:intel_dump_pipe_config] ips: 1
>[    0.855604] [drm:intel_dump_pipe_config] double wide: 0
>[    0.855606] [drm:intel_dump_pipe_config] ddi_pll_sel: 0x20000000; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    0.855606] [drm:intel_dump_pipe_config] planes on this crtc
>[    0.855609] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled
>[    0.855611] [drm:intel_dump_pipe_config] 	FB:53, fb = 1920x1080 format = 0x34325258
>[    0.855611] [drm:intel_dump_pipe_config] 	scaler:0 src (0, 0) 1920x1080 dst (0, 0) 1920x1080
>[    0.855613] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[    0.855614] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[    0.855620] [drm:intel_reference_shared_dpll] using LCPLL 1350 for pipe A
>[    0.859371] [drm:intel_edp_backlight_off] 
>[    0.902928] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    0.905519] ata3.00: ATA-8: LITEONIT LMT-256M6M mSATA 256GB, DM8110F, max UDMA/133
>[    0.905520] ata3.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>[    0.906066] ata3.00: configured for UDMA/133
>[    1.059470] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    1.059475] [drm:lpt_disable_backlight] cpu backlight was enabled, disabling
>[    1.059482] [drm:intel_disable_pipe] disabling pipe A
>[    1.077855] [drm:edp_panel_off] Turn eDP port A panel power off
>[    1.077859] [drm:wait_panel_off] Wait for panel power off time
>[    1.077863] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[    1.078426] [drm:intel_get_hpd_pins] hotplug event received, stat 0x08000000, dig 0x00000011, pins 0x00000010
>[    1.078428] [drm:intel_hpd_irq_handler] digital hpd port A - short
>[    1.078479] [drm:intel_dp_hpd_pulse] got hpd irq on port A - short
>[    1.130220] [drm:intel_get_hpd_pins] hotplug event received, stat 0x08000000, dig 0x00000012, pins 0x00000010
>[    1.130222] [drm:intel_hpd_irq_handler] digital hpd port A - long
>[    1.130224] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0
>[    1.138029] [drm:wait_panel_status] Wait complete
>[    1.138039] [drm:intel_disable_shared_dpll] disable LCPLL 1350 (active 1, on? 1) for crtc 26
>[    1.138041] [drm:intel_disable_shared_dpll] disabling LCPLL 1350
>[    1.138047] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[    1.138048] [drm:verify_encoder_state] [ENCODER:45:TMDS-45]
>[    1.138051] [drm:verify_encoder_state] [ENCODER:47:DP MST-47]
>[    1.138052] [drm:verify_encoder_state] [ENCODER:48:DP MST-48]
>[    1.138053] [drm:verify_encoder_state] [ENCODER:49:DP MST-49]
>[    1.138054] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1]
>[    1.138056] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1]
>[    1.138057] [drm:verify_single_dpll_state] WRPLL 1
>[    1.138059] [drm:verify_single_dpll_state] WRPLL 2
>[    1.138061] [drm:verify_single_dpll_state] SPLL
>[    1.138064] [drm:verify_single_dpll_state] LCPLL 810
>[    1.138065] [drm:verify_single_dpll_state] LCPLL 1350
>[    1.138067] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    1.138068] [drm:verify_single_dpll_state] LCPLL 2700
>[    1.138071] [drm:intel_enable_shared_dpll] enable LCPLL 1350 (active 1, on? 0) for crtc 26
>[    1.138072] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    1.138073] [drm:intel_enable_shared_dpll] enabling LCPLL 1350
>[    1.531561] tsc: Refined TSC clocksource calibration: 2394.453 MHz
>[    1.531564] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283bf4e6f2, max_idle_ns: 440795216136 ns
>[    1.679565] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[    1.679569] [drm:wait_panel_status] Wait complete
>[    1.679576] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[    1.679579] [drm:edp_panel_vdd_on] eDP port A panel power wasn't enabled
>[    1.789073] [drm:intel_get_hpd_pins] hotplug event received, stat 0x08000000, dig 0x00000012, pins 0x00000010
>[    1.789077] [drm:intel_hpd_irq_handler] digital hpd port A - long
>[    1.789079] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1
>[    1.821710] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[    1.825823] [drm:gen6_enable_rps] Overclocking supported. Max: 1100MHz, Overclock max: 1100MHz
>[    1.884041] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00
>[    1.884689] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no
>[    1.884695] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
>[    1.884698] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    1.884702] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    1.885186] [drm:edp_panel_on] Turn eDP port A panel power on
>[    1.885189] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    1.885196] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[    1.885200] [drm:wait_panel_status] Wait complete
>[    1.885203] [drm:wait_panel_on] Wait for panel power on
>[    1.885207] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[    2.091921] [drm:wait_panel_status] Wait complete
>[    2.116056] [drm:drm_dp_dpcd_access] too many retries, giving up
>[    2.117156] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.117158] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[    2.117160] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    2.117781] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[    2.118700] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[    2.118768] [drm:intel_enable_pipe] enabling pipe A
>[    2.118934] [drm:intel_edp_backlight_on] 
>[    2.118936] [drm:intel_panel_enable_backlight] pipe A
>[    2.118943] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[    2.118949] [drm:intel_psr_enable] PSR not supported by this panel
>[    2.118950] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
>[    2.154238] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[    2.154247] [drm:verify_crtc_state] [CRTC:26]
>[    2.154260] [drm:verify_single_dpll_state] LCPLL 1350
>[    2.154292] [drm:drm_fb_helper_hotplug_event] 
>[    2.154294] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1]
>[    2.154296] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1]
>[    2.154686] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    2.154692] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes :
>[    2.154697] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9
>[    2.154700] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 111020 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0x9
>[    2.154702] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1]
>[    2.154703] [drm:intel_dp_detect] [CONNECTOR:46:DP-1]
>[    2.154708] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] disconnected
>[    2.154710] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1]
>[    2.154712] [drm:intel_hdmi_detect] [CONNECTOR:50:HDMI-A-1]
>[    2.155031] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A
>[    2.279606] [drm:intel_hdmi_detect] HDMI live status down
>[    2.279611] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] disconnected
>[    2.279622] [drm:drm_setup_crtcs] 
>[    2.279625] [drm:drm_enable_connectors] connector 37 enabled? yes
>[    2.279627] [drm:drm_enable_connectors] connector 46 enabled? no
>[    2.279628] [drm:drm_enable_connectors] connector 50 enabled? no
>[    2.279631] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
>[    2.279633] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
>[    2.279635] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:26]: 1920x1080
>[    2.279637] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    2.279638] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    2.279641] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    2.289007] Console: switching to colour frame buffer device 240x67
>[    2.296289] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.307900] scsi 2:0:0:0: Direct-Access     ATA      LITEONIT LMT-256 10F  PQ: 0 ANSI: 5
>[    2.335798] sd 2:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
>[    2.336250] sd 2:0:0:0: [sda] Write Protect is off
>[    2.336254] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.336388] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.340101]  sda: sda1 sda2 sda3 sda6
>[    2.340846] sd 2:0:0:0: [sda] Attached SCSI disk
>[    2.340859] PM: Hibernation image partition 8:3 present
>[    2.340861] PM: Looking for hibernation image.
>[    2.341006] PM: Image not found (code -22)
>[    2.341008] PM: Hibernation image not present or could not be loaded.
>[    2.345187] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
>[    2.345195] VFS: Mounted root (ext4 filesystem) readonly on device 8:6.
>[    2.346133] Freeing unused kernel memory: 1344K (ffffffff81cf3000 - ffffffff81e43000)
>[    2.346134] Write protecting the kernel read-only data: 12288k
>[    2.346346] Freeing unused kernel memory: 1040K (ffff880001afc000 - ffff880001c00000)
>[    2.349067] Freeing unused kernel memory: 1652K (ffff880001e63000 - ffff880002000000)
>[    2.399364] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
>[    2.423262] random: systemd urandom read with 28 bits of entropy available
>[    2.436255] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
>[    2.436405] systemd[1]: Detected architecture x86-64.
>[    2.436550] systemd[1]: Set hostname to <xps13>.
>[    2.519506] systemd[1]: dundee.service: Cannot add dependency job, ignoring: Unit dundee.service is masked.
>[    2.519599] systemd[1]: ofono.service: Cannot add dependency job, ignoring: Unit ofono.service is masked.
>[    2.520236] systemd[1]: Reached target User and Group Name Lookups.
>[    2.520307] systemd[1]: Listening on Device-mapper event daemon FIFOs.
>[    2.520344] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
>[    2.520373] systemd[1]: Listening on udev Kernel Socket.
>[    2.520402] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    2.520427] systemd[1]: Listening on udev Control Socket.
>[    2.520448] systemd[1]: Listening on fsck to fsckd communication Socket.
>[    2.520517] systemd[1]: Listening on Journal Audit Socket.
>[    2.520546] systemd[1]: Listening on Journal Socket (/dev/log).
>[    2.520567] systemd[1]: Listening on Syslog Socket.
>[    2.520589] systemd[1]: Listening on LVM2 poll daemon socket.
>[    2.520673] systemd[1]: Created slice System Slice.
>[    2.520746] systemd[1]: Created slice system-getty.slice.
>[    2.520777] systemd[1]: Listening on RPCbind Server Activation Socket.
>[    2.520806] systemd[1]: Listening on Journal Socket.
>[    2.531613] clocksource: Switched to clocksource tsc
>[    2.535763] systemd[1]: Mounting RPC Pipe File System...
>[    2.536415] systemd[1]: Mounting POSIX Message Queue File System...
>[    2.536840] systemd[1]: Starting File System Check on Root Device...
>[    2.537230] systemd[1]: Starting Nameserver information manager...
>[    2.538120] systemd[1]: Starting Create list of required static device nodes for the current kernel...
>[    2.538395] systemd[1]: Mounting Debug File System...
>[    2.540555] systemd[1]: Starting Set the console keyboard layout...
>[    2.541124] systemd[1]: Mounting Huge Pages File System...
>[    2.541274] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    2.541325] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    2.541360] systemd[1]: Listening on LVM2 metadata daemon socket.
>[    2.541780] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
>[    2.543439] systemd[1]: Created slice User and Session Slice.
>[    2.543465] systemd[1]: Reached target Slices.
>[    2.543629] systemd[1]: Created slice system-systemd\x2dfsck.slice.
>[    2.545939] systemd[1]: Starting Load Kernel Modules...
>[    2.545967] systemd[1]: Reached target Encrypted Volumes.
>[    2.546377] systemd[1]: Starting Journal Service...
>[    2.547487] systemd[1]: Mounted Huge Pages File System.
>[    2.547512] systemd[1]: Mounted Debug File System.
>[    2.547526] systemd[1]: Mounted POSIX Message Queue File System.
>[    2.548130] systemd[1]: Started Create list of required static device nodes for the current kernel.
>[    2.548973] systemd[1]: Started File System Check Daemon to report status.
>[    2.549402] systemd[1]: Starting Create Static Device Nodes in /dev...
>[    2.551618] systemd[1]: Started Nameserver information manager.
>[    2.560923] RPC: Registered named UNIX socket transport module.
>[    2.560926] RPC: Registered udp transport module.
>[    2.560927] RPC: Registered tcp transport module.
>[    2.560929] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    2.561334] lp: driver loaded but no devices found
>[    2.561628] systemd[1]: Mounted RPC Pipe File System.
>[    2.562508] systemd[1]: Started LVM2 metadata daemon.
>[    2.562639] ppdev: user-space parallel port driver
>[    2.565055] systemd[1]: Started Load Kernel Modules.
>[    2.565753] systemd[1]: Starting Apply Kernel Variables...
>[    2.569240] systemd[1]: Started Apply Kernel Variables.
>[    2.577350] systemd[1]: Started Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
>[    2.578629] systemd[1]: Started Journal Service.
>[    2.616194] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
>[    2.640863] systemd-journald[142]: Received request to flush runtime journal from PID 1
>[    2.695162] sdhci: Secure Digital Host Controller Interface driver
>[    2.695165] sdhci: Copyright(c) Pierre Ossman
>[    2.713650] hidraw: raw HID events driver (C) Jiri Kosina
>[    2.720462] thermal LNXTHERM:00: registered as thermal_zone0
>[    2.720466] ACPI: Thermal Zone [TZ00] (28 C)
>[    2.741259] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    2.741652] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[    2.751502] ACPI: bus type USB registered
>[    2.751520] usbcore: registered new interface driver usbfs
>[    2.751530] usbcore: registered new interface driver hub
>[    2.751674] usbcore: registered new device driver usb
>[    2.753337] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    2.753778] ehci-pci: EHCI PCI platform driver
>[    2.753963] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    2.753970] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
>[    2.753983] ehci-pci 0000:00:1d.0: debug port 2
>[    2.757883] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    2.758833] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf051d000
>[    2.760189] Intel(R) Wireless WiFi driver for Linux
>[    2.760191] Copyright(c) 2003- 2015 Intel Corporation
>[    2.765346] sd 2:0:0:0: Attached scsi generic sg0 type 0
>[    2.765800] iwlwifi 0000:02:00.0: loaded firmware version 17.311016.0 op_mode iwlmvm
>[    2.766566] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=937/937
>[    2.766568] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[    2.767817] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    2.767867] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.767869] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.767870] usb usb1: Product: EHCI Host Controller
>[    2.767871] usb usb1: Manufacturer: Linux 4.7.0-rc5-00066-g0f172b0 ehci_hcd
>[    2.767872] usb usb1: SerialNumber: 0000:00:1d.0
>[    2.768002] hub 1-0:1.0: USB hub found
>[    2.768011] hub 1-0:1.0: 2 ports detected
>[    2.768285] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
>[    2.768287] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
>[    2.768323] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    2.768330] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    2.769394] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
>[    2.769399] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    2.769894] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.769897] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.769898] usb usb2: Product: xHCI Host Controller
>[    2.769899] usb usb2: Manufacturer: Linux 4.7.0-rc5-00066-g0f172b0 xhci-hcd
>[    2.769900] usb usb2: SerialNumber: 0000:00:14.0
>[    2.770008] hub 2-0:1.0: USB hub found
>[    2.770022] hub 2-0:1.0: 9 ports detected
>[    2.772136] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    2.772142] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    2.772182] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
>[    2.772184] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.772186] usb usb3: Product: xHCI Host Controller
>[    2.772188] usb usb3: Manufacturer: Linux 4.7.0-rc5-00066-g0f172b0 xhci-hcd
>[    2.772190] usb usb3: SerialNumber: 0000:00:14.0
>[    2.772319] hub 3-0:1.0: USB hub found
>[    2.772330] hub 3-0:1.0: 4 ports detected
>[    2.773681] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops 0xffffffff8188f550)
>[    2.774983] [drm:intel_power_well_enable] enabling display
>[    2.774985] [drm:hsw_set_power_well] Enabling power well
>[    2.790406] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
>[    2.791602] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[    2.791831] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.
>[    2.792004] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3661: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[    2.792008] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    2.792010] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>[    2.792019] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
>[    2.792021] snd_hda_codec_realtek hdaudioC1D0:    inputs:
>[    2.792023] snd_hda_codec_realtek hdaudioC1D0:      Headphone Mic=0x19
>[    2.792025] snd_hda_codec_realtek hdaudioC1D0:      Headset Mic=0x1b
>[    2.792027] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
>[    2.792638] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
>[    2.795648] ACPI: AC Adapter [ADP0] (on-line)
>[    2.795705] ACPI: Battery Slot [BAT0] (battery absent)
>[    2.795904] wmi: Mapper loaded
>[    2.801803] AVX2 version of gcm_enc/dec engaged.
>[    2.801807] AES CTR mode by8 optimization enabled
>[    2.805172] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
>[    2.805323] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
>[    2.809250] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
>[    2.809287] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
>[    2.809321] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
>[    2.813847] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>[    2.830437] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>[    2.834303] Adding 8388604k swap on /dev/sda3.  Priority:-1 extents:1 across:8388604k SSFS
>[    2.862478] iTCO_vendor_support: vendor-support=0
>[    2.862947] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    2.862981] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    2.863062] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    2.863647] hid-rmi 0018:06CB:2734.0001: Scanning PDT...
>[    2.866253] hid-rmi 0018:06CB:2734.0001: Found F34 on page 0x00
>[    2.868973] hid-rmi 0018:06CB:2734.0001: Found F01 on page 0x00
>[    2.871442] hid-rmi 0018:06CB:2734.0001: Found F11 on page 0x00
>[    2.883002] hid-rmi 0018:06CB:2734.0001: Found F54 on page 0x01
>[    2.885464] hid-rmi 0018:06CB:2734.0001: Found F30 on page 0x01
>[    2.892889] hid-rmi 0018:06CB:2734.0001: Found F55 on page 0x02
>[    2.899907] hid-rmi 0018:06CB:2734.0001: Found F51 on page 0x03
>[    2.901964] dell_wmi: Detected Dell WMI interface version 0
>[    2.902040] input: Dell WMI hotkeys as /devices/virtual/input/input13
>[    2.910421] hid-rmi 0018:06CB:2734.0001: rmi_scan_pdt: Done with PDT scan.
>[    2.934264] random: nonblocking pool is initialized
>[    2.950505] hid-rmi 0018:06CB:2734.0001: rmi_populate_f11: size in mm: 97 x 59
>[    2.963570] hid-rmi 0018:06CB:2734.0001: firmware id: 1522295
>[    2.963614] input: DLL060A:00 06CB:2734 as /devices/pci0000:00/INT33C3:00/i2c-8/i2c-DLL060A:00/0018:06CB:2734.0001/input/input12
>[    2.963696] hid-rmi 0018:06CB:2734.0001: input,hidraw0: I2C HID v1.00 Pointer [DLL060A:00 06CB:2734] on i2c-DLL060A:00
>[    3.043599] thermal LNXTHERM:01: registered as thermal_zone1
>[    3.043602] ACPI: Thermal Zone [TZ01] (30 C)
>[    3.079582] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    3.083586] usb 2-3: new full-speed USB device number 2 using xhci_hcd
>[    3.131237] ahci 0000:00:1f.2: port does not support device sleep
>[    3.165036] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>[    3.212043] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
>[    3.212047] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    3.212183] hub 1-1:1.0: USB hub found
>[    3.212892] usb 2-3: New USB device found, idVendor=06cb, idProduct=0af8
>[    3.212896] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.212898] usb 2-3: Product: Synaptics Large Touch Screen
>[    3.212900] usb 2-3: Manufacturer: SYNAPTICS
>[    3.213151] hub 1-1:1.0: 8 ports detected
>[    3.379616] usb 2-5: new high-speed USB device number 3 using xhci_hcd
>[    3.422377] Process accounting resumed
>[    3.544639] usb 2-5: New USB device found, idVendor=0bda, idProduct=5752
>[    3.544642] usb 2-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>[    3.544643] usb 2-5: Product: Integrated_Webcam_HD
>[    3.544644] usb 2-5: Manufacturer: CN0Y2TKG7248742EDBD6A00
>[    3.544645] usb 2-5: SerialNumber: 200901010001
>[    3.716021] usb 2-6: new full-speed USB device number 4 using xhci_hcd
>[    3.759182] [drm:i915_gem_open] 
>[    3.773590] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[    3.800180] [drm:i915_gem_open] 
>[    3.802614] [drm:drm_mode_addfb2] [FB:55]
>[    3.802753] [drm:internal_framebuffer_create] could not create framebuffer
>[    3.802757] [drm:internal_framebuffer_create] could not create framebuffer
>[    3.802763] [drm:drm_mode_addfb2] [FB:55]
>[    3.844718] usb 2-6: New USB device found, idVendor=8087, idProduct=07dc
>[    3.844720] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    3.878313] vboxdrv: Found 4 processor cores
>[    3.878627] media: Linux media interface: v0.10
>[    3.882681] Linux video capture interface: v2.00
>[    3.885358] usbcore: registered new interface driver usbhid
>[    3.885361] usbhid: USB HID core driver
>[    3.888696] input: SYNAPTICS Synaptics Large Touch Screen as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/0003:06CB:0AF8.0002/input/input14
>[    3.891015] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752)
>[    3.894687] Bluetooth: Core ver 2.21
>[    3.894700] NET: Registered protocol family 31
>[    3.894702] Bluetooth: HCI device and connection manager initialized
>[    3.894705] Bluetooth: HCI socket layer initialized
>[    3.894707] Bluetooth: L2CAP socket layer initialized
>[    3.894711] Bluetooth: SCO socket layer initialized
>[    3.895824] vboxdrv: TSC mode is Invariant, tentative frequency 2394425320 Hz
>[    3.895826] vboxdrv: Successfully loaded version 5.0.24_Debian (interface 0x00240000)
>[    3.897091] usbcore: registered new interface driver btusb
>[    3.897998] uvcvideo 2-5:1.0: Entity type for entity Extension 4 was not initialized!
>[    3.898002] uvcvideo 2-5:1.0: Entity type for entity Extension 7 was not initialized!
>[    3.898005] uvcvideo 2-5:1.0: Entity type for entity Processing 2 was not initialized!
>[    3.898007] uvcvideo 2-5:1.0: Entity type for entity Camera 1 was not initialized!
>[    3.900140] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input15
>[    3.900160] VBoxNetFlt: Successfully started.
>[    3.904152] VBoxNetAdp: Successfully started.
>[    3.907005] VBoxPciLinuxInit
>[    3.907011] vboxpci: pci-stub module not available, cannot detach PCI devices
>[    3.907012] vboxpci: IOMMU not found (not registered)
>[    3.911317] Bluetooth: hci0: read Intel version: 370710018002030d53
>[    3.911320] Bluetooth: hci0: Intel device is already patched. patch num: 53
>[    3.947933] hid-multitouch 0003:06CB:0AF8.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [SYNAPTICS Synaptics Large Touch Screen] on usb-0000:00:14.0-3/input0
>[    3.947935] usbcore: registered new interface driver uvcvideo
>[    3.947938] USB Video Class driver (1.1.1)
>[    3.962246] [drm:drm_mode_addfb2] [FB:55]
>[    3.998032] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[    3.998035] Bluetooth: BNEP filters: protocol multicast
>[    3.998039] Bluetooth: BNEP socket layer initialized
>[    4.376338] [drm:drm_mode_addfb2] [FB:57]
>[    4.377549] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[    4.377555] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1]
>[    4.431637] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    4.435609] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[    4.450400] Ebtables v2.0 registered
>[    4.628683] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
>[    4.632258] tun: Universal TUN/TAP device driver, 1.6
>[    4.632261] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[    4.662088] [drm:i915_gem_open] 
>[    4.679716] virbr0: port 1(virbr0-nic) entered blocking state
>[    4.679719] virbr0: port 1(virbr0-nic) entered disabled state
>[    4.679791] device virbr0-nic entered promiscuous mode
>[    4.683059] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[    4.685603] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[    4.773153] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
>[    4.808740] device virbr0-nic left promiscuous mode
>[    4.808744] virbr0: port 1(virbr0-nic) entered disabled state
>[    5.155679] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[    5.155688] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    5.819997] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1]
>[    5.820000] [drm:intel_dp_detect] [CONNECTOR:37:eDP-1]
>[    5.820007] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    5.820013] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    5.820368] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    5.820382] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:eDP-1] probed modes :
>[    5.820385] [drm:drm_mode_debug_printmodeline] Modeline 38:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9
>[    5.820387] [drm:drm_mode_debug_printmodeline] Modeline 39:"1920x1080" 48 111020 1920 1966 1996 2080 1080 1082 1086 1112 0x40 0x9
>[    5.820647] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1]
>[    5.820649] [drm:intel_dp_detect] [CONNECTOR:46:DP-1]
>[    5.820653] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:DP-1] disconnected
>[    5.820657] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1]
>[    5.820659] [drm:intel_hdmi_detect] [CONNECTOR:50:HDMI-A-1]
>[    5.947764] [drm:intel_hdmi_detect] HDMI live status down
>[    5.947775] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:50:HDMI-A-1] disconnected
>[    5.968221] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[    6.059325] [drm:drm_mode_addfb2] [FB:52]
>[    6.071946] [drm:drm_mode_addfb2] [FB:58]
>[    6.085863] [drm:drm_mode_addfb2] [FB:60]
>[    7.833849] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[    8.007838] [drm:i915_gem_open] 
>[    8.014018] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[    8.016382] [drm:i915_gem_context_create_ioctl] HW context 2 created
>[    8.016834] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[    8.017467] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[    8.017725] [drm:i915_gem_context_destroy_ioctl] HW context 2 destroyed
>[    8.018603] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[    8.127163] [drm:i915_gem_open] 
>[    8.134204] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[    8.134974] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[    8.266732] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[    8.827746] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[    8.827755] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    8.865309] [drm:i915_gem_open] 
>[    8.883713] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[    8.884777] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[    9.058450] [drm:i915_gem_open] 
>[    9.081301] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[    9.235284] [drm:drm_mode_addfb2] [FB:58]
>[    9.269296] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[    9.275877] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[    9.281122] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[    9.287068] [drm:drm_mode_addfb2] [FB:60]
>[    9.288136] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[    9.290269] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[    9.295859] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[    9.297166] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[    9.311401] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[    9.314859] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[    9.320463] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[    9.320584] [drm:drm_mode_addfb2] [FB:61]
>[    9.322736] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[    9.327858] [drm:i915_audio_component_sync_audio_rate] no valid port C
>[    9.328180] [drm:i915_gem_open] 
>[    9.329168] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[    9.335883] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[    9.337791] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[    9.342253] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[    9.343854] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[    9.344192] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[    9.345231] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[    9.351860] [drm:i915_audio_component_sync_audio_rate] no valid port D
>[    9.357842] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[    9.363879] [drm:i915_audio_component_sync_audio_rate] no valid port B
>[    9.379269] [drm:i915_gem_open] 
>[    9.390693] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[    9.391705] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[    9.494659] Bluetooth: RFCOMM TTY layer initialized
>[    9.494667] Bluetooth: RFCOMM socket layer initialized
>[    9.494672] Bluetooth: RFCOMM ver 1.11
>[   10.410285] [drm:i915_gem_open] 
>[   10.428305] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[   10.433652] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[   10.783465] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[   10.916496] [drm:i915_gem_context_create_ioctl] HW context 2 created
>[   10.917432] [drm:i915_gem_context_destroy_ioctl] HW context 2 destroyed
>[   11.923337] [drm:i915_gem_context_create_ioctl] HW context 1 created
>[   11.972030] [drm:i915_gem_context_create_ioctl] HW context 2 created
>[   12.163452] [drm:i915_gem_context_create_ioctl] HW context 3 created
>[   12.234449] [drm:i915_gem_context_create_ioctl] HW context 4 created
>[   13.465372] [drm:i915_gem_context_create_ioctl] HW context 5 created
>[   13.479846] [drm:i915_gem_context_create_ioctl] HW context 6 created
>[   16.665771] [drm:i915_gem_context_destroy_ioctl] HW context 1 destroyed
>[   18.460903] [drm:i915_gem_open] 
>[   24.571835] [drm:i915_gem_open] 
>[   42.335479] [drm:intel_panel_get_backlight] get backlight PWM = 937
>[   44.048147] [drm:intel_panel_get_backlight] get backlight PWM = 937
>[   44.306796] [drm:intel_panel_get_backlight] get backlight PWM = 937
>[   63.546022] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[   63.546028] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24
>[   63.546034] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz
>[   63.546043] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24
>[   63.546045] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[   63.546048] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[   63.546053] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff8801c17b9000 for pipe A
>[   63.546055] [drm:intel_dump_pipe_config] cpu_transcoder: EDP
>[   63.546057] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[   63.546060] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   63.546063] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[   63.546066] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   63.546068] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[   63.546070] [drm:intel_dump_pipe_config] requested mode:
>[   63.546074] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x0 0x9
>[   63.546076] [drm:intel_dump_pipe_config] adjusted mode:
>[   63.546080] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9
>[   63.546084] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0x9
>[   63.546086] [drm:intel_dump_pipe_config] port clock: 270000
>[   63.546088] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[   63.546090] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[   63.546092] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   63.546095] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   63.546097] [drm:intel_dump_pipe_config] ips: 1
>[   63.546098] [drm:intel_dump_pipe_config] double wide: 0
>[   63.546101] [drm:intel_dump_pipe_config] ddi_pll_sel: 0x20000000; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[   63.546103] [drm:intel_dump_pipe_config] planes on this crtc
>[   63.546106] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled
>[   63.546109] [drm:intel_dump_pipe_config] 	FB:58, fb = 1920x1080 format = 0x34325258
>[   63.546113] [drm:intel_dump_pipe_config] 	scaler:0 src (0, 0) 1920x1080 dst (0, 0) 1920x1080
>[   63.546116] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 enabled
>[   63.546118] [drm:intel_dump_pipe_config] 	FB:169, fb = 64x64 format = 0x34325241
>[   63.546121] [drm:intel_dump_pipe_config] 	scaler:0 src (0, 0) 64x64 dst (956, 85) 64x64
>[   63.546125] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[   63.546134] [drm:intel_reference_shared_dpll] using LCPLL 1350 for pipe A
>[   63.571441] [drm:intel_edp_backlight_off] 
>[   63.773087] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[   63.773102] [drm:intel_disable_pipe] disabling pipe A
>[   63.789341] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[   63.789354] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[   63.789524] [drm:edp_panel_off] Turn eDP port A panel power off
>[   63.789530] [drm:wait_panel_off] Wait for panel power off time
>[   63.789536] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control abcd0000
>[   63.790104] [drm:intel_get_hpd_pins] hotplug event received, stat 0x08000000, dig 0x00000011, pins 0x00000010
>[   63.790108] [drm:intel_hpd_irq_handler] digital hpd port A - short
>[   63.790134] [drm:intel_dp_hpd_pulse] got hpd irq on port A - short
>[   63.841924] [drm:intel_get_hpd_pins] hotplug event received, stat 0x08000000, dig 0x00000012, pins 0x00000010
>[   63.841928] [drm:intel_hpd_irq_handler] digital hpd port A - long
>[   63.841930] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 0
>[   63.849666] [drm:wait_panel_status] Wait complete
>[   63.849672] [drm:intel_disable_shared_dpll] disable LCPLL 1350 (active 1, on? 1) for crtc 26
>[   63.849674] [drm:intel_disable_shared_dpll] disabling LCPLL 1350
>[   63.849679] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[   63.849680] [drm:verify_encoder_state] [ENCODER:45:TMDS-45]
>[   63.849683] [drm:verify_encoder_state] [ENCODER:47:DP MST-47]
>[   63.849685] [drm:verify_encoder_state] [ENCODER:48:DP MST-48]
>[   63.849686] [drm:verify_encoder_state] [ENCODER:49:DP MST-49]
>[   63.849689] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[   63.849691] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1]
>[   63.849692] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[   63.849695] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1]
>[   63.849697] [drm:verify_single_dpll_state] WRPLL 1
>[   63.849699] [drm:verify_single_dpll_state] WRPLL 2
>[   63.849701] [drm:verify_single_dpll_state] SPLL
>[   63.849703] [drm:verify_single_dpll_state] LCPLL 810
>[   63.849704] [drm:verify_single_dpll_state] LCPLL 1350
>[   63.849706] [drm:verify_single_dpll_state] LCPLL 2700
>[   63.849712] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[   63.849714] [drm:verify_crtc_state] [CRTC:26]
>[   63.849717] [drm:verify_single_dpll_state] LCPLL 1350
>[   64.393192] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0000
>[   64.393202] [drm:wait_panel_status] Wait complete
>[   64.393211] [drm:edp_panel_vdd_on] PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[   64.393217] [drm:edp_panel_vdd_on] eDP port A panel power wasn't enabled
>[   64.502824] [drm:intel_get_hpd_pins] hotplug event received, stat 0x08000000, dig 0x00000012, pins 0x00000010
>[   64.502833] [drm:intel_hpd_irq_handler] digital hpd port A - long
>[   64.502838] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 4 - cnt: 1
>[   64.597664] [drm:intel_dp_get_dpcd] DPCD: 11 0a 02 00 00 00 00 00 00 00 00 00 00 00 00
>[   64.598328] [drm:intel_dp_get_dpcd] Display Port TPS3 support: source yes, sink no
>[   64.598336] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
>[   64.598340] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[   64.598343] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[   64.623416] [drm:drm_dp_dpcd_access] too many retries, giving up
>[   64.623767] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A
>[   64.711768] [drm:drm_mode_setcrtc] [CRTC:26:crtc-0]
>[   64.711774] [drm:drm_mode_setcrtc] [CONNECTOR:37:eDP-1]
>[   64.711782] [drm:connected_sink_compute_bpp] [CONNECTOR:37:eDP-1] checking for sink bpp constrains
>[   64.711783] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24
>[   64.711787] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 138780KHz
>[   64.711793] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24
>[   64.711794] [drm:intel_dp_compute_config] DP link bw required 333072 available 432000
>[   64.711796] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[   64.711799] [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff8801c0aae000 for pipe A
>[   64.711800] [drm:intel_dump_pipe_config] cpu_transcoder: EDP
>[   64.711801] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[   64.711803] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[   64.711805] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m: 6467616, gmch_n: 8388608, link_m: 269484, link_n: 524288, tu: 64
>[   64.711807] [drm:intel_dump_pipe_config] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[   64.711808] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[   64.711809] [drm:intel_dump_pipe_config] requested mode:
>[   64.711812] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x0 0x9
>[   64.711813] [drm:intel_dump_pipe_config] adjusted mode:
>[   64.711816] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 138780 1920 1966 1996 2080 1080 1082 1086 1112 0x48 0x9
>[   64.711818] [drm:intel_dump_crtc_timings] crtc timings: 138780 1920 1966 1996 2080 1080 1082 1086 1112, type: 0x48 flags: 0x9
>[   64.711819] [drm:intel_dump_pipe_config] port clock: 270000
>[   64.711820] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[   64.711822] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[   64.711824] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[   64.711825] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   64.711826] [drm:intel_dump_pipe_config] ips: 1
>[   64.711828] [drm:intel_dump_pipe_config] double wide: 0
>[   64.711829] [drm:intel_dump_pipe_config] ddi_pll_sel: 0x20000000; dpll_hw_state: wrpll: 0x0 spll: 0x0
>[   64.711830] [drm:intel_dump_pipe_config] planes on this crtc
>[   64.711832] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled
>[   64.711834] [drm:intel_dump_pipe_config] 	FB:58, fb = 1920x1080 format = 0x34325258
>[   64.711836] [drm:intel_dump_pipe_config] 	scaler:0 src (0, 0) 1920x1080 dst (0, 0) 1920x1080
>[   64.711838] [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0
>[   64.711840] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0
>[   64.711845] [drm:intel_reference_shared_dpll] using LCPLL 1350 for pipe A
>[   64.714997] [drm:verify_encoder_state] [ENCODER:36:TMDS-36]
>[   64.714998] [drm:verify_encoder_state] [ENCODER:45:TMDS-45]
>[   64.715000] [drm:verify_encoder_state] [ENCODER:47:DP MST-47]
>[   64.715001] [drm:verify_encoder_state] [ENCODER:48:DP MST-48]
>[   64.715002] [drm:verify_encoder_state] [ENCODER:49:DP MST-49]
>[   64.715003] [drm:intel_connector_verify_state] [CONNECTOR:46:DP-1]
>[   64.715004] [drm:intel_connector_verify_state] [CONNECTOR:50:HDMI-A-1]
>[   64.715005] [drm:verify_single_dpll_state] WRPLL 1
>[   64.715006] [drm:verify_single_dpll_state] WRPLL 2
>[   64.715007] [drm:verify_single_dpll_state] SPLL
>[   64.715009] [drm:verify_single_dpll_state] LCPLL 810
>[   64.715010] [drm:verify_single_dpll_state] LCPLL 1350
>[   64.715010] [drm:verify_single_dpll_state] LCPLL 2700
>[   64.715012] [drm:intel_enable_shared_dpll] enable LCPLL 1350 (active 1, on? 0) for crtc 26
>[   64.715013] [drm:intel_enable_shared_dpll] enabling LCPLL 1350
>[   64.715021] [drm:edp_panel_on] Turn eDP port A panel power on
>[   64.715024] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[   64.715027] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control abcd0008
>[   64.715029] [drm:wait_panel_status] Wait complete
>[   64.715031] [drm:wait_panel_on] Wait for panel power on
>[   64.715034] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control abcd000b
>[   64.933114] [drm:wait_panel_status] Wait complete
>[   64.934236] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[   64.934244] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[   64.934247] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[   64.934877] [drm:intel_dp_link_training_clock_recovery] clock recovery OK
>[   64.935806] [drm:intel_dp_link_training_channel_equalization] Channel EQ done. DP Training successful
>[   64.935892] [drm:intel_enable_pipe] enabling pipe A
>[   64.936062] [drm:intel_edp_backlight_on] 
>[   64.936066] [drm:intel_panel_enable_backlight] pipe A
>[   64.936075] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[   64.945199] [drm:intel_psr_enable] PSR not supported by this panel
>[   64.945208] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
>[   64.969355] [drm:intel_connector_verify_state] [CONNECTOR:37:eDP-1]
>[   64.969365] [drm:verify_crtc_state] [CRTC:26]
>[   64.969378] [drm:verify_single_dpll_state] LCPLL 1350
>[   64.973211] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=937/937
>[   64.973215] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[   67.941177] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[   67.941186] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007

Actions: View

Attachments on bug 96645: 124794 | 129720

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.