Attachment 126235 Details for Bug 97607 – dmesg (boot)

dmesg (boot)

dmesg-before-piglit-run-1.log (text/plain), 79.01 KB, created by Jari Tahvanainen on 2016-09-06 06:08:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jari Tahvanainen

Created: 2016-09-06 06:08:32 UTC

Size: 79.01 KB

patch

obsolete

>[    0.000000] Linux version 4.8.0-rc4-CI-CI_DRM_1612+ (qa-reports@texel) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #1 SMP PREEMPT Sat Sep 3 15:33:59 EEST 2016
>[    0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=UUID=23ee3d29-27a6-419d-a15d-6b15edc9947d intel_iommu=igfx_off drm.debug=0xe ro 3
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
>[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
>[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
>[    0.000000] x86/fpu: Using 'eager' FPU context switches.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000085e10fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000085e11000-0x0000000085e11fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x0000000085e12000-0x0000000085e3bfff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000085e3c000-0x000000008a247fff] usable
>[    0.000000] BIOS-e820: [mem 0x000000008a248000-0x000000008a549fff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000008a54a000-0x000000008a581fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000008a582000-0x000000008ae73fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000008ae74000-0x000000008b294fff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000008b295000-0x000000008b2fefff] type 20
>[    0.000000] BIOS-e820: [mem 0x000000008b2ff000-0x000000008b2fffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000008b300000-0x000000008b3fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] efi: EFI v2.40 by American Megatrends
>[    0.000000] efi:  ACPI=0x8a555000  ACPI 2.0=0x8a555000  SMBIOS=0xf05e0  SMBIOS 3.0=0xf0600  ESRT=0x8b1da818  MPS=0xfc9b0 
>[    0.000000] esrt: Reserving ESRT space from 0x000000008b1da818 to 0x000000008b1da850.
>[    0.000000] SMBIOS 3.0.0 present.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x26f000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: write-back
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
>[    0.000000]   1 base 00A0000000 mask 7FE0000000 uncachable
>[    0.000000]   2 base 0090000000 mask 7FF0000000 uncachable
>[    0.000000]   3 base 008C000000 mask 7FFC000000 uncachable
>[    0.000000]   4 base 008B800000 mask 7FFF800000 uncachable
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
>[    0.000000] e820: last_pfn = 0x8b300 max_arch_pfn = 0x400000000
>[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0x03ecc000, 0x03eccfff] PGTABLE
>[    0.000000] BRK [0x03ecd000, 0x03ecdfff] PGTABLE
>[    0.000000] BRK [0x03ece000, 0x03ecefff] PGTABLE
>[    0.000000] BRK [0x03ecf000, 0x03ecffff] PGTABLE
>[    0.000000] BRK [0x03ed0000, 0x03ed0fff] PGTABLE
>[    0.000000] BRK [0x03ed1000, 0x03ed1fff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x346c8000-0x3635bfff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x000000008A555000 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 0x000000008A555098 0000B4 (v01 INTEL  NUC6i5SY 0000002A AMI  00010013)
>[    0.000000] ACPI: FACP 0x000000008A576EF8 00010C (v05 INTEL  NUC6i5SY 0000002A AMI  00010013)
>[    0.000000] ACPI: DSDT 0x000000008A5551E0 021D12 (v02 INTEL  NUC6i5SY 0000002A INTL 20120913)
>[    0.000000] ACPI: FACS 0x000000008AE73F80 000040
>[    0.000000] ACPI: APIC 0x000000008A577008 000084 (v03 INTEL  NUC6i5SY 0000002A AMI  00010013)
>[    0.000000] ACPI: FPDT 0x000000008A577090 000044 (v01 INTEL  NUC6i5SY 0000002A AMI  00010013)
>[    0.000000] ACPI: FIDT 0x000000008A5770D8 00009C (v01 INTEL  NUC6i5SY 0000002A AMI  00010013)
>[    0.000000] ACPI: MCFG 0x000000008A577178 00003C (v01 INTEL  NUC6i5SY 0000002A MSFT 00000097)
>[    0.000000] ACPI: HPET 0x000000008A5771B8 000038 (v01 INTEL  NUC6i5SY 0000002A AMI. 0005000B)
>[    0.000000] ACPI: LPIT 0x000000008A5771F0 000094 (v01 INTEL  NUC6i5SY 0000002A MSFT 0000005F)
>[    0.000000] ACPI: SSDT 0x000000008A577288 000248 (v02 INTEL  NUC6i5SY 0000002A INTL 20120913)
>[    0.000000] ACPI: SSDT 0x000000008A5774D0 002BAE (v02 INTEL  NUC6i5SY 0000002A INTL 20120913)
>[    0.000000] ACPI: SSDT 0x000000008A57A080 000BE3 (v02 INTEL  NUC6i5SY 0000002A INTL 20120913)
>[    0.000000] ACPI: SSDT 0x000000008A57AC68 0004A3 (v02 INTEL  NUC6i5SY 0000002A INTL 20120913)
>[    0.000000] ACPI: DBGP 0x000000008A57B110 000034 (v01 INTEL  NUC6i5SY 0000002A MSFT 0000005F)
>[    0.000000] ACPI: DBG2 0x000000008A57B148 000054 (v00 INTEL  NUC6i5SY 0000002A MSFT 0000005F)
>[    0.000000] ACPI: SSDT 0x000000008A57B1A0 00046E (v02 INTEL  NUC6i5SY 0000002A INTL 20120913)
>[    0.000000] ACPI: SSDT 0x000000008A57B610 00546C (v02 INTEL  NUC6i5SY 0000002A INTL 20120913)
>[    0.000000] ACPI: UEFI 0x000000008A580A80 000042 (v01 INTEL  NUC6i5SY 0000002A      00000000)
>[    0.000000] ACPI: SSDT 0x000000008A580AC8 000E73 (v02 INTEL  NUC6i5SY 0000002A INTL 20120913)
>[    0.000000] ACPI: BGRT 0x000000008A581940 000038 (v01 INTEL  NUC6i5SY 0000002A AMI  00010013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000026effffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
>[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000085e10fff]
>[    0.000000]   node   0: [mem 0x0000000085e3c000-0x000000008a247fff]
>[    0.000000]   node   0: [mem 0x000000008b2ff000-0x000000008b2fffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000026effffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
>[    0.000000] On node 0 totalpages: 2068923
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 26 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 8777 pages used for memmap
>[    0.000000]   DMA32 zone: 561694 pages, LIFO batch:31
>[    0.000000]   Normal zone: 23488 pages used for memmap
>[    0.000000]   Normal zone: 1503232 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics memory at 0x000000008c000000-0x000000008fffffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[    0.000000] e820: [mem 0x90000000-0xdfffffff] available for PCI devices
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
>[    0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] percpu: Embedded 35 pages/cpu @ffff88026ec00000 s103368 r8192 d31800 u524288
>[    0.000000] pcpu-alloc: s103368 r8192 d31800 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2036568
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=UUID=23ee3d29-27a6-419d-a15d-6b15edc9947d intel_iommu=igfx_off drm.debug=0xe ro 3
>[    0.000000] DMAR: Disable GFX device mapping
>[    0.000000] log_buf_len individual max cpu contribution: 262144 bytes
>[    0.000000] log_buf_len total cpu_extra contributions: 786432 bytes
>[    0.000000] log_buf_len min size: 262144 bytes
>[    0.000000] log_buf_len: 1048576 bytes
>[    0.000000] early log buf free: 251916(96%)
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.000000] Memory: 7911360K/8275692K available (8276K kernel code, 1380K rwdata, 3240K rodata, 1156K init, 14620K bss, 364332K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Running RCU self tests
>[    0.000000] Preemptible hierarchical RCU implementation.
>[    0.000000] 	RCU lockdep checking is enabled.
>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
>[    0.000000] kmemleak: Kernel memory leak detector disabled
>[    0.000000] NR_IRQS:4352 nr_irqs:1024 16
>[    0.000000] spurious 8259A interrupt: IRQ7.
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
>[    0.000000] ... MAX_LOCK_DEPTH:          48
>[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
>[    0.000000] ... CLASSHASH_SIZE:          4096
>[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
>[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
>[    0.000000] ... CHAINHASH_SIZE:          32768
>[    0.000000]  memory used by lock dependency info: 8159 kB
>[    0.000000]  per task-struct memory footprint: 1920 bytes
>[    0.000000] kmemleak: Early log buffer exceeded (2755), please increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Detected 1800.000 MHz processor
>[    0.000062] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=1800000)
>[    0.000074] pid_max: default: 32768 minimum: 301
>[    0.000124] ACPI: Core revision 20160422
>[    0.254878] random: fast init done
>[    0.873229] ACPI: 8 ACPI AML tables successfully acquired and loaded
>
>[    0.874191] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.874199] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.876566] CPU: Physical Processor ID: 0
>[    0.876572] CPU: Processor Core ID: 0
>[    0.876580] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.876585] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.876595] mce: CPU supports 9 MCE banks
>[    0.876635] CPU0: Thermal monitoring enabled (TM1)
>[    0.876669] process: using mwait in idle threads
>[    0.876677] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>[    0.876682] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>[    0.877408] Freeing SMP alternatives memory: 32K (ffffffff8207c000 - ffffffff82084000)
>[    0.891238] smpboot: APIC(0) Converting physical 0 to logical package 0
>[    0.891246] smpboot: Max logical packages: 2
>[    0.892541] x2apic: IRQ remapping doesn't support X2APIC mode
>[    0.896324] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
>[    0.906346] TSC deadline timer enabled
>[    0.906353] smpboot: CPU0: Intel(R) Core(TM) i5-6260U CPU @ 1.80GHz (family: 0x6, model: 0x4e, stepping: 0x3)
>[    0.906367] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
>[    0.906430] ... version:                4
>[    0.906435] ... bit width:              48
>[    0.906440] ... generic registers:      4
>[    0.906445] ... value mask:             0000ffffffffffff
>[    0.906450] ... max period:             0000ffffffffffff
>[    0.906455] ... fixed-purpose events:   3
>[    0.906460] ... event mask:             000000070000000f
>[    0.915102] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.920013] x86: Booting SMP configuration:
>[    0.920020] .... node  #0, CPUs:      #1 #2 #3
>[    1.115309] x86: Booted up 1 node, 4 CPUs
>[    1.115320] smpboot: Total of 4 processors activated (14452.03 BogoMIPS)
>[    1.122193] devtmpfs: initialized
>[    1.125677] PM: Registering ACPI NVS region [mem 0x85e11000-0x85e11fff] (4096 bytes)
>[    1.125698] PM: Registering ACPI NVS region [mem 0x8a582000-0x8ae73fff] (9379840 bytes)
>[    1.137294] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
>[    1.137561] xor: automatically using best checksumming function:
>[    1.146631]    avx       : 22960.000 MB/sec
>[    1.146645] pinctrl core: initialized pinctrl subsystem
>[    1.148093] NET: Registered protocol family 16
>[    1.154720] cpuidle: using governor menu
>[    1.154958] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    1.154980] ACPI: bus type PCI registered
>[    1.155992] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    1.156003] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    1.156041] PCI: Using configuration type 1 for base access
>[    1.198892] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    1.217068] raid6: sse2x1   gen()  5269 MB/s
>[    1.234138] raid6: sse2x1   xor()  3339 MB/s
>[    1.251221] raid6: sse2x2   gen()  6097 MB/s
>[    1.268289] raid6: sse2x2   xor()  4154 MB/s
>[    1.285365] raid6: sse2x4   gen()  7195 MB/s
>[    1.302444] raid6: sse2x4   xor()  4892 MB/s
>[    1.319520] raid6: avx2x1   gen() 12246 MB/s
>[    1.336596] raid6: avx2x2   gen() 14253 MB/s
>[    1.353670] raid6: avx2x4   gen() 15492 MB/s
>[    1.353676] raid6: using algorithm avx2x4 gen() 15492 MB/s
>[    1.353682] raid6: using avx2x2 recovery algorithm
>[    1.353979] ACPI: Added _OSI(Module Device)
>[    1.353985] ACPI: Added _OSI(Processor Device)
>[    1.353991] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    1.353997] ACPI: Added _OSI(Processor Aggregator Device)
>[    1.398080] ACPI: Executed 25 blocks of module-level executable AML code
>[    1.792835] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    1.845587] ACPI: Dynamic OEM Table Load:
>[    1.845692] ACPI: SSDT 0xFFFF880264DFD3D8 000558 (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
>[    1.858383] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
>[    1.906085] ACPI: Dynamic OEM Table Load:
>[    1.906114] ACPI: SSDT 0xFFFF880264E0CFB8 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
>[    1.928122] ACPI: Dynamic OEM Table Load:
>[    1.928151] ACPI: SSDT 0xFFFF880264DFA548 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
>[    1.959372] ACPI: Dynamic OEM Table Load:
>[    1.959400] ACPI: SSDT 0xFFFF8802648E4358 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
>[    2.058064] ACPI: Interpreter enabled
>[    2.058317] ACPI: (supports S0 S3 S5)
>[    2.058323] ACPI: Using IOAPIC for interrupt routing
>[    2.058964] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    2.125396] ACPI: Power Resource [PG00] (on)
>[    2.139532] ACPI: Power Resource [PG01] (on)
>[    2.153657] ACPI: Power Resource [PG02] (on)
>[    2.228823] ACPI: Power Resource [WRST] (on)
>[    2.242859] ACPI: Power Resource [WRST] (on)
>[    2.256866] ACPI: Power Resource [WRST] (on)
>[    2.270910] ACPI: Power Resource [WRST] (on)
>[    2.284887] ACPI: Power Resource [WRST] (on)
>[    2.298811] ACPI: Power Resource [WRST] (on)
>[    2.312712] ACPI: Power Resource [WRST] (on)
>[    2.326697] ACPI: Power Resource [WRST] (on)
>[    2.340587] ACPI: Power Resource [WRST] (on)
>[    2.355220] ACPI: Power Resource [WRST] (on)
>[    2.369115] ACPI: Power Resource [WRST] (on)
>[    2.383062] ACPI: Power Resource [WRST] (on)
>[    2.396945] ACPI: Power Resource [WRST] (on)
>[    2.410775] ACPI: Power Resource [WRST] (on)
>[    2.424601] ACPI: Power Resource [WRST] (on)
>[    2.438492] ACPI: Power Resource [WRST] (on)
>[    2.452365] ACPI: Power Resource [WRST] (on)
>[    2.466378] ACPI: Power Resource [WRST] (on)
>[    2.480386] ACPI: Power Resource [WRST] (on)
>[    2.494509] ACPI: Power Resource [WRST] (on)
>[    2.804310] ACPI: Power Resource [FN00] (off)
>[    2.809433] ACPI: Power Resource [FN01] (off)
>[    2.814535] ACPI: Power Resource [FN02] (off)
>[    2.819623] ACPI: Power Resource [FN03] (off)
>[    2.824777] ACPI: Power Resource [FN04] (off)
>[    2.864023] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    2.864070] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    2.866057] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
>[    2.887974] PCI host bridge to bus 0000:00
>[    2.887989] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    2.888003] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    2.888022] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    2.888038] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
>[    2.888054] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
>[    2.888070] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    2.888178] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
>[    2.899981] pci 0000:00:02.0: [8086:1926] type 00 class 0x030000
>[    2.899999] pci 0000:00:02.0: reg 0x10: [mem 0xde000000-0xdeffffff 64bit]
>[    2.900011] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
>[    2.900020] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
>[    2.906143] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
>[    2.906171] pci 0000:00:14.0: reg 0x10: [mem 0xdf130000-0xdf13ffff 64bit]
>[    2.906388] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    2.914382] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    2.915601] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
>[    2.915629] pci 0000:00:14.2: reg 0x10: [mem 0xdf150000-0xdf150fff 64bit]
>[    2.920432] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
>[    2.920471] pci 0000:00:16.0: reg 0x10: [mem 0xdf14f000-0xdf14ffff 64bit]
>[    2.920682] pci 0000:00:16.0: PME# supported from D3hot
>[    2.926768] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
>[    2.926790] pci 0000:00:17.0: reg 0x10: [mem 0xdf148000-0xdf149fff]
>[    2.926802] pci 0000:00:17.0: reg 0x14: [mem 0xdf14e000-0xdf14e0ff]
>[    2.926813] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
>[    2.926824] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
>[    2.926836] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
>[    2.926848] pci 0000:00:17.0: reg 0x24: [mem 0xdf14d000-0xdf14d7ff]
>[    2.927016] pci 0000:00:17.0: PME# supported from D3hot
>[    2.933409] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400
>[    2.933644] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    2.941065] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    2.942380] pci 0000:00:1e.0: [8086:9d27] type 00 class 0x118000
>[    2.942588] pci 0000:00:1e.0: reg 0x10: [mem 0xdf14c000-0xdf14cfff 64bit]
>[    2.949374] pci 0000:00:1e.6: [8086:9d2d] type 00 class 0x080501
>[    2.949404] pci 0000:00:1e.6: reg 0x10: [mem 0xdf14b000-0xdf14bfff 64bit]
>[    2.956176] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
>[    2.962322] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
>[    2.962340] pci 0000:00:1f.2: reg 0x10: [mem 0xdf144000-0xdf147fff]
>[    2.968403] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
>[    2.968437] pci 0000:00:1f.3: reg 0x10: [mem 0xdf140000-0xdf143fff 64bit]
>[    2.968484] pci 0000:00:1f.3: reg 0x20: [mem 0xdf120000-0xdf12ffff 64bit]
>[    2.968659] pci 0000:00:1f.3: PME# supported from D3hot D3cold
>[    2.975692] pci 0000:00:1f.3: System wakeup disabled by ACPI
>[    2.976898] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
>[    2.976946] pci 0000:00:1f.4: reg 0x10: [mem 0xdf14a000-0xdf14a0ff 64bit]
>[    2.977026] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
>[    2.983083] pci 0000:00:1f.6: [8086:1570] type 00 class 0x020000
>[    2.983111] pci 0000:00:1f.6: reg 0x10: [mem 0xdf100000-0xdf11ffff]
>[    2.983353] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
>[    2.988760] pci 0000:00:1f.6: System wakeup disabled by ACPI
>[    2.991212] pci 0000:01:00.0: [8086:24f3] type 00 class 0x028000
>[    2.991385] pci 0000:01:00.0: reg 0x10: [mem 0xdf000000-0xdf001fff 64bit]
>[    2.992615] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>[    2.995827] pci 0000:01:00.0: System wakeup disabled by ACPI
>[    3.000852] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    3.000869] pci 0000:00:1c.0:   bridge window [mem 0xdf000000-0xdf0fffff]
>[    3.000887] pci_bus 0000:00: on NUMA node 0
>[    3.062808] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    3.065167] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    3.067530] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    3.069893] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    3.072256] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    3.074604] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    3.076947] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    3.079301] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    3.097050] ACPI: Enabled 5 GPEs in block 00 to 7F
>[    3.098516] vgaarb: setting as boot device: PCI:0000:00:02.0
>[    3.098524] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    3.098540] vgaarb: loaded
>[    3.098545] vgaarb: bridge control possible 0000:00:02.0
>[    3.099959] SCSI subsystem initialized
>[    3.100359] libata version 3.00 loaded.
>[    3.100847] ACPI: bus type USB registered
>[    3.101341] usbcore: registered new interface driver usbfs
>[    3.101576] usbcore: registered new interface driver hub
>[    3.101768] usbcore: registered new device driver usb
>[    3.112166] Advanced Linux Sound Architecture Driver Initialized.
>[    3.112371] PCI: Using ACPI for IRQ routing
>[    3.140823] PCI: pci_cache_line_size set to 64 bytes
>[    3.141413] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    3.141453] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    3.141465] e820: reserve RAM buffer [mem 0x85e11000-0x87ffffff]
>[    3.141478] e820: reserve RAM buffer [mem 0x8a248000-0x8bffffff]
>[    3.141485] e820: reserve RAM buffer [mem 0x8b300000-0x8bffffff]
>[    3.141498] e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
>[    3.144599] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    3.144614] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
>[    3.146735] clocksource: Switched to clocksource hpet
>[    3.286178] pnp: PnP ACPI init
>[    3.293630] system 00:00: [io  0x0a00-0x0a2f] has been reserved
>[    3.293656] system 00:00: [io  0x0a30-0x0a3f] has been reserved
>[    3.293680] system 00:00: [io  0x0a40-0x0a4f] has been reserved
>[    3.293779] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    3.302091] pnp 00:01: [dma 0 disabled]
>[    3.302691] pnp 00:01: Plug and Play ACPI device, IDs ITE8713 (active)
>[    3.305398] system 00:02: [io  0x0680-0x069f] has been reserved
>[    3.305423] system 00:02: [io  0xffff] has been reserved
>[    3.305445] system 00:02: [io  0xffff] has been reserved
>[    3.305468] system 00:02: [io  0xffff] has been reserved
>[    3.305494] system 00:02: [io  0x1800-0x18fe] has been reserved
>[    3.305518] system 00:02: [io  0x164e-0x164f] has been reserved
>[    3.305529] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    3.307500] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    3.308783] system 00:04: [io  0x1854-0x1857] has been reserved
>[    3.308796] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    3.316697] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
>[    3.316723] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
>[    3.316773] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
>[    3.316797] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
>[    3.316821] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    3.316844] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
>[    3.316868] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    3.316891] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
>[    3.316933] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    3.316956] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved
>[    3.316968] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    3.318252] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
>[    3.318277] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
>[    3.318300] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
>[    3.318339] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
>[    3.318362] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
>[    3.318389] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
>[    3.318413] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
>[    3.318424] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    3.325419] system 00:07: [io  0xff00-0xfffe] has been reserved
>[    3.325432] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    3.361723] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved
>[    3.361775] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved
>[    3.361787] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    3.388251] pnp: PnP ACPI: found 9 devices
>[    3.430904] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    3.430941] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    3.430959] pci 0000:00:1c.0:   bridge window [mem 0xdf000000-0xdf0fffff]
>[    3.430981] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    3.430983] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    3.430984] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    3.430986] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
>[    3.430987] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
>[    3.430989] pci_bus 0000:01: resource 1 [mem 0xdf000000-0xdf0fffff]
>[    3.431217] NET: Registered protocol family 2
>[    3.432800] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    3.432918] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
>[    3.437189] TCP: Hash tables configured (established 65536 bind 65536)
>[    3.437344] UDP hash table entries: 4096 (order: 7, 655360 bytes)
>[    3.437954] UDP-Lite hash table entries: 4096 (order: 7, 655360 bytes)
>[    3.438950] NET: Registered protocol family 1
>[    3.439020] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    3.447003] PCI: CLS 0 bytes, default 64
>[    3.447719] Unpacking initramfs...
>[    4.163626] Freeing initrd memory: 29264K (ffff8800346c8000 - ffff88003635c000)
>[    4.163641] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    4.163649] software IO TLB [mem 0x806f6000-0x846f6000] (64MB) mapped at [ffff8800806f6000-ffff8800846f5fff]
>[    4.163961] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
>[    4.163970] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>[    4.163976] RAPL PMU: hw unit of domain package 2^-14 Joules
>[    4.163981] RAPL PMU: hw unit of domain dram 2^-14 Joules
>[    4.163987] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>[    4.163992] RAPL PMU: hw unit of domain psys 2^-14 Joules
>[    4.174432] futex hash table entries: 1024 (order: 5, 131072 bytes)
>[    4.183489] workingset: timestamp_bits=46 max_order=21 bucket_order=0
>[    4.283849] ntfs: driver 2.1.32 [Flags: R/O].
>[    4.310473] NET: Registered protocol family 38
>[    4.311577] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    4.311603] io scheduler noop registered
>[    4.313465] io scheduler cfq registered (default)
>[    4.313472] start plist test
>[    4.315185] end plist test
>[    4.326381] uvesafb: failed to execute /sbin/v86d
>[    4.326388] uvesafb: make sure that the v86d helper is installed and executable
>[    4.326405] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
>[    4.326424] uvesafb: vbe_init() failed with -22
>[    4.326469] uvesafb: probe of uvesafb.0 failed with error -22
>[    4.326778] intel_idle: MWAIT substates: 0x11142120
>[    4.326780] intel_idle: v0.4.1 model 0x4E
>[    4.335373] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    4.336812] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
>[    4.336879] ACPI: Sleep Button [SLPB]
>[    4.337910] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>[    4.337934] ACPI: Power Button [PWRB]
>[    4.338964] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    4.338987] ACPI: Power Button [PWRF]
>[    4.531493] thermal LNXTHERM:00: registered as thermal_zone0
>[    4.531503] ACPI: Thermal Zone [TZ00] (28 C)
>[    4.539534] thermal LNXTHERM:01: registered as thermal_zone1
>[    4.539543] ACPI: Thermal Zone [TZ01] (30 C)
>[    4.540505] GHES: HEST is not enabled!
>[    4.541064] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>[    4.549881] Non-volatile memory driver v1.3
>[    4.550573] Linux agpgart interface v0.103
>[    4.552028] [drm:drm_core_init] Initialized drm 1.1.0 20060810
>[    4.561386] loop: module loaded
>[    4.563653] ahci 0000:00:17.0: version 3.0
>[    4.568468] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
>[    4.568480] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    4.574132] scsi host0: ahci
>[    4.578353] ata1: SATA max UDMA/133 abar m2048@0xdf14d000 port 0xdf14d100 irq 120
>[    4.578993] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    4.579019] ehci-pci: EHCI PCI platform driver
>[    4.579187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    4.579208] ohci-pci: OHCI PCI platform driver
>[    4.579377] uhci_hcd: USB Universal Host Controller Interface driver
>[    4.585033] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    4.585306] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    4.586895] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
>[    4.586917] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    4.588288] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    4.588297] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    4.588305] usb usb1: Product: xHCI Host Controller
>[    4.588311] usb usb1: Manufacturer: Linux 4.8.0-rc4-CI-CI_DRM_1612+ xhci-hcd
>[    4.588318] usb usb1: SerialNumber: 0000:00:14.0
>[    4.592116] hub 1-0:1.0: USB hub found
>[    4.592402] hub 1-0:1.0: 12 ports detected
>[    4.939814] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    4.942788] ata1.00: ATA-10: INTEL SSDSC2BW240H6, RG21, max UDMA/133
>[    4.942801] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    4.955813] ata1.00: configured for UDMA/133
>[    4.958173] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2BW24 RG21 PQ: 0 ANSI: 5
>[    4.968025] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    4.968070] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    4.968926] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    4.968934] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    4.968943] usb usb2: Product: xHCI Host Controller
>[    4.968949] usb usb2: Manufacturer: Linux 4.8.0-rc4-CI-CI_DRM_1612+ xhci-hcd
>[    4.968955] usb usb2: SerialNumber: 0000:00:14.0
>[    4.972907] hub 2-0:1.0: USB hub found
>[    4.973246] hub 2-0:1.0: 6 ports detected
>[    4.977530] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
>[    4.978550] sd 0:0:0:0: [sda] Write Protect is off
>[    4.978561] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    4.978906] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    4.979437] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    4.985586]  sda: sda1 sda2 sda3
>[    4.992059] sd 0:0:0:0: [sda] Attached SCSI disk
>[    5.166515] usbcore: registered new interface driver usb-storage
>[    5.167240] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    5.766927] tsc: Refined TSC clocksource calibration: 1800.000 MHz
>[    5.766953] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
>[    5.922832] usb 1-4: new high-speed USB device number 2 using xhci_hcd
>[    6.099008] usb 1-4: New USB device found, idVendor=0b95, idProduct=1790
>[    6.099018] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    6.099025] usb 1-4: Product: AX88179
>[    6.099031] usb 1-4: Manufacturer: ASIX Elec. Corp.
>[    6.099036] usb 1-4: SerialNumber: 00000000000001
>[    6.263830] usb 1-7: new full-speed USB device number 3 using xhci_hcd
>[    6.366086] i8042: No controller found
>[    6.366843] mousedev: PS/2 mouse device common for all mice
>[    6.369981] rtc_cmos 00:03: RTC can wake from S4
>[    6.371602] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>[    6.371805] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    6.373366] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
>[    6.376828] device-mapper: uevent: version 1.0.3
>[    6.379183] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
>[    6.379194] intel_pstate: Intel P-state driver initializing
>[    6.381099] intel_pstate: HWP enabled
>[    6.387430] EFI Variables Facility v0.08 2004-May-17
>[    6.406546] hidraw: raw HID events driver (C) Jiri Kosina
>[    6.407780] usbcore: registered new interface driver usbhid
>[    6.407784] usbhid: USB HID core driver
>[    6.408190] intel_rapl: Found RAPL domain package
>[    6.408200] intel_rapl: Found RAPL domain core
>[    6.408209] intel_rapl: Found RAPL domain uncore
>[    6.408218] intel_rapl: Found RAPL domain dram
>[    6.412685] Initializing XFRM netlink socket
>[    6.416579] NET: Registered protocol family 10
>[    6.419843] mip6: Mobile IPv6
>[    6.419858] NET: Registered protocol family 17
>[    6.419968] NET: Registered protocol family 15
>[    6.422347] AVX2 version of gcm_enc/dec engaged.
>[    6.422352] AES CTR mode by8 optimization enabled
>[    6.434625] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2b
>[    6.434635] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    6.448891] registered taskstats version 1
>[    6.460477] Btrfs loaded, crc32c=crc32c-generic
>[    6.474591] rtc_cmos 00:03: setting system clock to 2016-09-03 12:36:18 UTC (1472906178)
>[    6.476008] ALSA device list:
>[    6.476012]   No soundcards found.
>[    6.477549] Freeing unused kernel memory: 1156K (ffffffff81f5b000 - ffffffff8207c000)
>[    6.477556] Write protecting the kernel read-only data: 14336k
>[    6.478666] Freeing unused kernel memory: 1940K (ffff88000281b000 - ffff880002a00000)
>[    6.480199] Freeing unused kernel memory: 856K (ffff880002d2a000 - ffff880002e00000)
>[    6.770297] clocksource: Switched to clocksource tsc
>[    7.240515] pps_core: LinuxPPS API ver. 1 registered
>[    7.240525] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    7.242407] PTP clock support registered
>[    7.248144] sdhci: Secure Digital Host Controller Interface driver
>[    7.248153] sdhci: Copyright(c) Pierre Ossman
>[    7.248950] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
>[    7.248958] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>[    7.270876] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    7.556016] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
>[    7.646998] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) b8:ae:ed:7f:11:86
>[    7.647057] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
>[    7.647161] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
>[    7.647329] sdhci-pci 0000:00:1e.6: SDHCI controller found [8086:9d2d] (rev 21)
>[    7.653496] sdhci-pci 0000:00:1e.6: failed to setup card detect gpio
>[    7.668654] mmc0: SDHCI controller on PCI [0000:00:1e.6] using ADMA 64-bit
>[    7.675460] [drm:intel_detect_pch] Found SunrisePoint LP PCH
>[    7.675466] [drm:get_allowed_dc_mask] Allowed DC state mask 03
>[    7.685108] [drm:intel_device_info_dump] i915 device info: gen=9, pciid=0x1926 rev=0x0a flags=need_gfx_hws,is_skylake,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    7.685160] [drm:intel_uncore_edram_detect] Found 64MB of eDRAM
>[    7.685467] [drm:intel_device_info_runtime_init] slice mask: 0003
>[    7.685468] [drm:intel_device_info_runtime_init] slice total: 2
>[    7.685469] [drm:intel_device_info_runtime_init] subslice total: 6
>[    7.685471] [drm:intel_device_info_runtime_init] subslice mask 0007
>[    7.685472] [drm:intel_device_info_runtime_init] subslice per slice: 3
>[    7.685473] [drm:intel_device_info_runtime_init] EU total: 48
>[    7.685474] [drm:intel_device_info_runtime_init] EU per subslice: 8
>[    7.685476] [drm:intel_device_info_runtime_init] has slice power gating: y
>[    7.685477] [drm:intel_device_info_runtime_init] has subslice power gating: n
>[    7.685478] [drm:intel_device_info_runtime_init] has EU power gating: y
>[    7.685480] [drm:intel_sanitize_options] ppgtt mode: 3
>[    7.685481] [drm:intel_sanitize_options] use GPU sempahores? no
>[    7.685533] [drm:i915_ggtt_probe_hw] Memory usable by graphics device = 4096M
>[    7.685541] [drm:i915_ggtt_probe_hw] GMADR size = 256M
>[    7.685542] [drm:i915_ggtt_probe_hw] GTT stolen size = 64M
>[    7.685593] [drm:i915_kick_out_vgacon] Replacing VGA console driver
>[    7.685682] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K
>[    7.686087] [drm:intel_opregion_setup] graphic opregion physical addr: 0x8ae5e018
>[    7.686123] [drm:intel_opregion_setup] Public ACPI methods supported
>[    7.686124] [drm:intel_opregion_setup] SWSCI supported
>[    7.696782] [drm:swsci_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    7.696783] [drm:intel_opregion_setup] ASLE supported
>[    7.696784] [drm:intel_opregion_setup] ASLE extension supported
>[    7.696785] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    7.697058] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    7.697066] [drm:drm_vblank_init] Driver supports precise vblank timestamp query.
>[    7.697073] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    7.697074] [drm:intel_bios_init] VBT signature "$VBT SKYLAKE        ", BDB version 200
>[    7.697076] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
>[    7.697076] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    7.702951] [drm:intel_opregion_get_panel_type] Ignoring OpRegion panel type (0)
>[    7.702953] [drm:parse_lfp_panel_data] Panel type: 2 (VBT)
>[    7.702954] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    7.702965] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    7.702967] [drm:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    7.702968] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[    7.702970] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    7.702970] [drm:parse_sdvo_device_mapping] Unsupported child device size for SDVO mapping.
>[    7.702971] [drm:parse_device_mapping] Expected child device config size for VBT version 200 not known; assuming 38
>[    7.702980] [drm:parse_driver_features] DRRS State Enabled:1
>[    7.702982] [drm:parse_ddi_port] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    7.702983] [drm:parse_ddi_port] VBT HDMI level shift for port B: 8
>[    7.702984] [drm:parse_ddi_port] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    7.702984] [drm:parse_ddi_port] VBT HDMI level shift for port C: 8
>[    7.704287] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    7.704311] [drm:intel_update_rawclk] rawclk rate: 24000 kHz
>[    7.704314] [drm:gen9_set_dc_state] Setting DC state from 00 to 00
>[    7.704366] [drm:intel_power_well_enable] enabling power well 1
>[    7.704379] [drm:intel_power_well_enable] enabling MISC IO power well
>[    7.704386] [drm:intel_update_cdclk] Current CD clock rate: 675000 kHz, VCO: 8100000 kHz, ref: 24000 kHz
>[    7.704389] [drm:intel_update_max_cdclk] Max CD clock rate: 675000 kHz
>[    7.704390] [drm:intel_update_max_cdclk] Max dotclock rate: 675000 kHz
>[    7.704411] [drm:intel_power_well_enable] enabling always-on
>[    7.704412] [drm:intel_power_well_enable] enabling DC off
>[    7.704414] [drm:gen9_set_dc_state] Setting DC state from 00 to 00
>[    7.704421] [drm:intel_power_well_enable] enabling power well 2
>[    7.704425] [drm:intel_power_well_enable] enabling DDI A/E power well
>[    7.704427] [drm:skl_set_power_well] Enabling DDI A/E power well
>[    7.704429] [drm:intel_power_well_enable] enabling DDI B power well
>[    7.704433] [drm:intel_power_well_enable] enabling DDI C power well
>[    7.704435] [drm:skl_set_power_well] Enabling DDI C power well
>[    7.704437] [drm:intel_power_well_enable] enabling DDI D power well
>[    7.704439] [drm:skl_set_power_well] Enabling DDI D power well
>[    7.704442] [drm:gen9_set_dc_state] Setting DC state from 00 to 00
>[    7.704463] [drm:intel_csr_ucode_init] Loading i915/skl_dmc_ver1_26.bin
>[    7.706207] [drm:csr_load_work_fn] Finished loading i915/skl_dmc_ver1_26.bin (v1.26)
>[    7.711301] [drm:intel_fbc_init] Sanitized enable_fbc value: 0
>[    7.712758] [drm:intel_print_wm_latency] Gen9 Plane WM0 latency 2 (2.0 usec)
>[    7.712760] [drm:intel_print_wm_latency] Gen9 Plane WM1 latency 19 (19.0 usec)
>[    7.712762] [drm:intel_print_wm_latency] Gen9 Plane WM2 latency 28 (28.0 usec)
>[    7.712763] [drm:intel_print_wm_latency] Gen9 Plane WM3 latency 32 (32.0 usec)
>[    7.712765] [drm:intel_print_wm_latency] Gen9 Plane WM4 latency 63 (63.0 usec)
>[    7.712766] [drm:intel_print_wm_latency] Gen9 Plane WM5 latency 77 (77.0 usec)
>[    7.712768] [drm:intel_print_wm_latency] Gen9 Plane WM6 latency 83 (83.0 usec)
>[    7.712769] [drm:intel_print_wm_latency] Gen9 Plane WM7 latency 99 (99.0 usec)
>[    7.712771] [drm:intel_modeset_init] 3 display pipes available.
>[    7.713312] [drm:intel_update_cdclk] Current CD clock rate: 675000 kHz, VCO: 8100000 kHz, ref: 24000 kHz
>[    7.713318] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    7.713812] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    7.714220] [drm:intel_pps_dump_state] cur t1_t3 0 t8 0 t9 0 t10 0 t11_t12 0
>[    7.714222] [drm:intel_pps_dump_state] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    7.714224] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 500
>[    7.714226] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    7.714275] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af05
>[    7.714283] [drm:intel_edp_panel_vdd_sanitize] VDD left on by BIOS, adjusting state tracking
>[    7.723000] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.731553] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.740012] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.748475] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.756938] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.765398] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.773857] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.782328] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.790786] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.799244] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.807702] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.816226] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.824684] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.833170] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.841629] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.850087] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.858545] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.867003] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.875495] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.883953] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.892419] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.900877] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.909335] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.917792] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.926250] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.934741] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.943199] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.951656] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.960114] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.968572] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.977030] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.985505] [drm:intel_dp_aux_ch] dp_aux_ch timeout status 0x7d4003ff
>[    7.985511] [drm:drm_dp_dpcd_access] Too many retries, giving up. First error: -110
>[    7.985513] [drm:intel_edp_init_connector] failed to retrieve link info, disabling eDP
>[    7.985577] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[    7.985647] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x00000000 PP_CONTROL: 0x00000000
>[    7.985856] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B
>[    7.986163] [drm:intel_dp_init_connector] Adding DP connector on port C
>[    7.986478] [drm:intel_hdmi_init_connector] Adding HDMI connector on port C
>[    7.986596] [drm:intel_modeset_readout_hw_state] [CRTC:26:pipe A] hw state readout: enabled
>[    7.986600] [drm:intel_modeset_readout_hw_state] [CRTC:30:pipe B] hw state readout: disabled
>[    7.986604] [drm:intel_modeset_readout_hw_state] [CRTC:34:pipe C] hw state readout: disabled
>[    7.986607] [drm:intel_modeset_readout_hw_state] DPLL 0 hw state readout: crtc_mask 0x00000000, on 1
>[    7.986611] [drm:intel_modeset_readout_hw_state] DPLL 1 hw state readout: crtc_mask 0x00000001, on 1
>[    7.986613] [drm:intel_modeset_readout_hw_state] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[    7.986615] [drm:intel_modeset_readout_hw_state] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
>[    7.986622] [drm:intel_modeset_readout_hw_state] [ENCODER:36:DDI B] hw state readout: enabled, pipe A
>[    7.986624] [drm:intel_modeset_readout_hw_state] [ENCODER:41:DDI C] hw state readout: disabled, pipe A
>[    7.986625] [drm:intel_modeset_readout_hw_state] [ENCODER:43:DP-MST A] hw state readout: disabled, pipe A
>[    7.986626] [drm:intel_modeset_readout_hw_state] [ENCODER:44:DP-MST B] hw state readout: disabled, pipe B
>[    7.986627] [drm:intel_modeset_readout_hw_state] [ENCODER:45:DP-MST C] hw state readout: disabled, pipe C
>[    7.986631] [drm:intel_modeset_readout_hw_state] [CONNECTOR:37:HDMI-A-1] hw state readout: enabled
>[    7.986634] [drm:intel_modeset_readout_hw_state] [CONNECTOR:42:DP-1] hw state readout: disabled
>[    7.986637] [drm:intel_modeset_readout_hw_state] [CONNECTOR:46:HDMI-A-2] hw state readout: disabled
>[    7.986771] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][setup_hw_state] config ffff88025bdf8958 for pipe A
>[    7.986772] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    7.986773] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    7.986774] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    7.986775] [drm:intel_dump_pipe_config] dp: 0, lanes: 4, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    7.986776] [drm:intel_dump_pipe_config] dp: 0, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    7.986776] [drm:intel_dump_pipe_config] audio: 0, infoframes: 1
>[    7.986777] [drm:intel_dump_pipe_config] requested mode:
>[    7.986779] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[    7.986779] [drm:intel_dump_pipe_config] adjusted mode:
>[    7.986781] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[    7.986782] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x40 flags: 0x5
>[    7.986783] [drm:intel_dump_pipe_config] port clock: 148500
>[    7.986783] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    7.986784] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0
>[    7.986785] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    7.986786] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[    7.986787] [drm:intel_dump_pipe_config] ips: 0
>[    7.986787] [drm:intel_dump_pipe_config] double wide: 0
>[    7.986788] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x80400173, cfgcr2: 0x3a5
>[    7.986789] [drm:intel_dump_pipe_config] planes on this crtc
>[    7.986790] [drm:intel_dump_pipe_config] [PLANE:23:plane 1A] disabled, scaler_id = -1
>[    7.986791] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = -1
>[    7.986792] [drm:intel_dump_pipe_config] [PLANE:27:plane 2A] disabled, scaler_id = -1
>[    7.986794] [drm:intel_dump_pipe_config] [CRTC:30:pipe B][setup_hw_state] config ffff88025bdf92a8 for pipe B
>[    7.986795] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    7.986796] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    7.986796] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    7.986797] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    7.986798] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    7.986799] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    7.986800] [drm:intel_dump_pipe_config] requested mode:
>[    7.986801] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    7.986802] [drm:intel_dump_pipe_config] adjusted mode:
>[    7.986803] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    7.986804] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    7.986804] [drm:intel_dump_pipe_config] port clock: 0
>[    7.986805] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    7.986806] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: 0
>[    7.986807] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    7.986808] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    7.986808] [drm:intel_dump_pipe_config] ips: 0
>[    7.986809] [drm:intel_dump_pipe_config] double wide: 0
>[    7.986810] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[    7.986810] [drm:intel_dump_pipe_config] planes on this crtc
>[    7.986811] [drm:intel_dump_pipe_config] [PLANE:28:plane 1B] disabled, scaler_id = -1
>[    7.986812] [drm:intel_dump_pipe_config] [PLANE:29:cursor B] disabled, scaler_id = -1
>[    7.986813] [drm:intel_dump_pipe_config] [PLANE:31:plane 2B] disabled, scaler_id = -1
>[    7.986815] [drm:intel_dump_pipe_config] [CRTC:34:pipe C][setup_hw_state] config ffff88025bdf9bf8 for pipe C
>[    7.986815] [drm:intel_dump_pipe_config] cpu_transcoder: C
>[    7.986816] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    7.986817] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    7.986818] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    7.986819] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    7.986820] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    7.986820] [drm:intel_dump_pipe_config] requested mode:
>[    7.986821] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    7.986822] [drm:intel_dump_pipe_config] adjusted mode:
>[    7.986823] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    7.986824] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    7.986825] [drm:intel_dump_pipe_config] port clock: 0
>[    7.986826] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    7.986826] [drm:intel_dump_pipe_config] num_scalers: 1, scaler_users: 0x0, scaler_id: 0
>[    7.986827] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    7.986828] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    7.986828] [drm:intel_dump_pipe_config] ips: 0
>[    7.986829] [drm:intel_dump_pipe_config] double wide: 0
>[    7.986830] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[    7.986831] [drm:intel_dump_pipe_config] planes on this crtc
>[    7.986831] [drm:intel_dump_pipe_config] [PLANE:32:plane 1C] disabled, scaler_id = -1
>[    7.986832] [drm:intel_dump_pipe_config] [PLANE:33:cursor C] disabled, scaler_id = -1
>[    7.986833] [drm:intel_dump_pipe_config] [PLANE:35:plane 2C] disabled, scaler_id = -1
>[    7.986834] [drm:intel_modeset_setup_hw_state] DPLL 0 enabled but not in use, disabling
>[    7.986877] [drm:intel_power_well_disable] disabling DDI D power well
>[    7.986881] [drm:skl_set_power_well] Disabling DDI D power well
>[    7.986884] [drm:intel_power_well_disable] disabling DDI C power well
>[    7.986886] [drm:skl_set_power_well] Disabling DDI C power well
>[    7.986888] [drm:intel_power_well_disable] disabling DDI A/E power well
>[    7.986890] [drm:skl_set_power_well] Disabling DDI A/E power well
>[    7.986911] [drm:skylake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    7.986935] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    7.987024] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    7.987083] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff88025cbc0040
>[    7.987382] [drm:i915_gem_init_ggtt] clearing unused GTT space: [7e9000, fffff000]
>[    7.987549] [drm:i915_gem_context_init] LR context support initialized
>[    7.987551] [drm:i915_gem_object_create_stolen] creating stolen object: size=1000
>[    7.987568] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=4096
>[    7.987595] [drm:intel_engine_create_scratch] render ring pipe control offset: 0xffffe000
>[    7.988128] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000
>[    7.988147] [drm:i915_pages_create_for_stolen] offset=0x7ea000, size=16384
>[    7.988562] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000
>[    7.988578] [drm:i915_pages_create_for_stolen] offset=0x7ee000, size=16384
>[    7.988861] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000
>[    7.988878] [drm:i915_pages_create_for_stolen] offset=0x7f2000, size=16384
>[    7.989155] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000
>[    7.989173] [drm:i915_pages_create_for_stolen] offset=0x7f6000, size=16384
>[    7.989445] [drm:i915_gem_object_create_stolen] creating stolen object: size=4000
>[    7.989464] [drm:i915_pages_create_for_stolen] offset=0x7fa000, size=16384
>[    7.989549] [drm:gen8_init_common_ring] Execlists enabled for render ring
>[    7.989618] [drm:gen8_init_common_ring] Execlists enabled for blitter ring
>[    7.989670] [drm:gen8_init_common_ring] Execlists enabled for bsd ring
>[    7.989722] [drm:gen8_init_common_ring] Execlists enabled for bsd2 ring
>[    7.989812] [drm:gen8_init_common_ring] Execlists enabled for video enhancement ring
>[    7.989931] [drm:intel_guc_setup] GuC fw status: path i915/skl_guc_ver6_1.bin, fetch NONE, load NONE
>[    7.989940] [drm:intel_guc_setup] GuC firmware load skipped
>[    7.990001] [drm:intel_update_cdclk] Current CD clock rate: 675000 kHz, VCO: 8100000 kHz, ref: 24000 kHz
>[    7.990026] [drm:intel_fbdev_init_bios] found possible fb from plane A
>[    7.990027] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping
>[    7.990027] [drm:intel_fbdev_init_bios] pipe C not active or no fb, skipping
>[    7.990028] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb
>[    7.990029] [drm:intel_fbdev_init_bios] pipe A area: 1920x1080, bpp: 32, size: 8294400
>[    7.990030] [drm:intel_fbdev_init_bios] fb big enough for plane A (8294400 >= 8294400)
>[    7.990030] [drm:intel_fbdev_init_bios] pipe B not active, skipping
>[    7.990031] [drm:intel_fbdev_init_bios] pipe C not active, skipping
>[    7.990032] [drm:intel_fbdev_init_bios] using BIOS fb for initial console
>[    7.993805] [drm:intel_dp_connector_register] registering DPDDC-C bus for card0-DP-1
>[    8.011741] [drm:intel_didl_outputs] More than 15 outputs detected via ACPI
>[    8.087848] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    8.100188] [drm:asle_set_backlight] bclp = 0x80000002
>[    8.100208] [drm:asle_set_backlight] updating opregion backlight 2/255
>[    8.104309] [drm:asle_set_backlight] bclp = 0x800000ff
>[    8.104312] [drm:asle_set_backlight] updating opregion backlight 255/255
>[    8.106401] acpi device:0f: registered as cooling_device9
>[    8.108761] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
>[    8.110823] [drm:i915_driver_load] Initialized i915 1.6.0 20160902 for 0000:00:02.0 on minor 0
>[    8.110837] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1]
>[    8.110839] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-1]
>[    8.136789] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    8.136790] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    8.137215] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    8.137219] [drm:drm_detect_monitor_audio] Monitor has basic audio support
>[    8.137221] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] status updated from unknown to connected
>[    8.137532] [drm:drm_edid_to_eld] ELD monitor G246HYL
>[    8.137534] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0
>[    8.137535] [drm:drm_edid_to_eld] ELD size 32, SAD count 1
>[    8.137587] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] probed modes :
>[    8.137589] [drm:drm_mode_debug_printmodeline] Modeline 50:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    8.137590] [drm:drm_mode_debug_printmodeline] Modeline 74:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[    8.137592] [drm:drm_mode_debug_printmodeline] Modeline 73:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[    8.137593] [drm:drm_mode_debug_printmodeline] Modeline 59:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
>[    8.137594] [drm:drm_mode_debug_printmodeline] Modeline 56:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    8.137596] [drm:drm_mode_debug_printmodeline] Modeline 58:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
>[    8.137597] [drm:drm_mode_debug_printmodeline] Modeline 57:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
>[    8.137598] [drm:drm_mode_debug_printmodeline] Modeline 55:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    8.137599] [drm:drm_mode_debug_printmodeline] Modeline 52:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    8.137601] [drm:drm_mode_debug_printmodeline] Modeline 76:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    8.137602] [drm:drm_mode_debug_printmodeline] Modeline 72:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[    8.137603] [drm:drm_mode_debug_printmodeline] Modeline 65:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    8.137604] [drm:drm_mode_debug_printmodeline] Modeline 66:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    8.137605] [drm:drm_mode_debug_printmodeline] Modeline 60:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    8.137607] [drm:drm_mode_debug_printmodeline] Modeline 61:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[    8.137608] [drm:drm_mode_debug_printmodeline] Modeline 71:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[    8.137609] [drm:drm_mode_debug_printmodeline] Modeline 77:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
>[    8.137610] [drm:drm_mode_debug_printmodeline] Modeline 53:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    8.137611] [drm:drm_mode_debug_printmodeline] Modeline 62:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[    8.137613] [drm:drm_mode_debug_printmodeline] Modeline 78:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    8.137614] [drm:drm_mode_debug_printmodeline] Modeline 54:"640x480" 60 25180 640 648 744 800 480 482 484 525 0x40 0xa
>[    8.137615] [drm:drm_mode_debug_printmodeline] Modeline 63:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    8.137616] [drm:drm_mode_debug_printmodeline] Modeline 64:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    8.137618] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:DP-1]
>[    8.137619] [drm:intel_dp_detect] [CONNECTOR:42:DP-1]
>[    8.137638] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:DP-1] status updated from unknown to disconnected
>[    8.137642] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:DP-1] disconnected
>[    8.137647] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2]
>[    8.137648] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2]
>[    8.232880] [drm:intel_hdmi_detect] HDMI live status down
>[    8.232888] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] status updated from unknown to disconnected
>[    8.232891] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected
>[    8.233187] [drm:drm_setup_crtcs] 
>[    8.233218] [drm:drm_enable_connectors] connector 37 enabled? yes
>[    8.233220] [drm:drm_enable_connectors] connector 42 enabled? no
>[    8.233221] [drm:drm_enable_connectors] connector 46 enabled? no
>[    8.233232] [drm:intel_fb_initial_config] looking for cmdline mode on connector HDMI-A-1
>[    8.233234] [drm:intel_fb_initial_config] looking for preferred mode on connector HDMI-A-1 0
>[    8.233236] [drm:intel_fb_initial_config] connector HDMI-A-1 on [CRTC:26:pipe A]: 1920x1080
>[    8.233238] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    8.233239] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    8.233250] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    8.233296] [drm:intelfb_create] re-using BIOS fb
>[    8.233356] [drm:intelfb_create] allocated 1920x1080 fb: 0x00000000
>[    8.235012] fbcon: inteldrmfb (fb0) is primary device
>[    8.236806] [drm:connected_sink_compute_bpp] [CONNECTOR:37:HDMI-A-1] checking for sink bpp constrains
>[    8.236808] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to EDID reported max of 24
>[    8.236811] [drm:intel_hdmi_compute_config] picking bpc to 8 for HDMI output
>[    8.236812] [drm:intel_hdmi_compute_config] forcing pipe bpc to 24 for HDMI
>[    8.236814] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[    8.236816] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff88025bcca548 for pipe A
>[    8.236817] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    8.236819] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
>[    8.236820] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    8.236822] [drm:intel_dump_pipe_config] dp: 0, lanes: 4, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    8.236823] [drm:intel_dump_pipe_config] dp: 0, lanes: 4, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    8.236824] [drm:intel_dump_pipe_config] audio: 1, infoframes: 1
>[    8.236825] [drm:intel_dump_pipe_config] requested mode:
>[    8.236828] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    8.236829] [drm:intel_dump_pipe_config] adjusted mode:
>[    8.236831] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[    8.236833] [drm:intel_dump_crtc_timings] crtc timings: 148500 1920 2008 2052 2200 1080 1084 1089 1125, type: 0x40 flags: 0x5
>[    8.236833] [drm:intel_dump_pipe_config] port clock: 148500
>[    8.236835] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    8.236836] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0
>[    8.236837] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    8.236839] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    8.236840] [drm:intel_dump_pipe_config] ips: 0
>[    8.236840] [drm:intel_dump_pipe_config] double wide: 0
>[    8.236842] [drm:intel_dump_pipe_config] ddi_pll_sel: 1; dpll_hw_state: ctrl1: 0x21, cfgcr1: 0x80400173, cfgcr2: 0x3a5
>[    8.236843] [drm:intel_dump_pipe_config] planes on this crtc
>[    8.236857] [drm:intel_dump_pipe_config] [PLANE:23:plane 1A] enabled
>[    8.236859] [drm:intel_dump_pipe_config] 	FB:48, fb = 1920x1080 format = XR24 little-endian (0x34325258)
>[    8.236859] [drm:intel_dump_pipe_config] 	scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080
>[    8.236875] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = -1
>[    8.236876] [drm:intel_dump_pipe_config] [PLANE:27:plane 2A] disabled, scaler_id = -1
>[    8.236879] [drm:intel_modeset_checks] New cdclk calculated to be atomic 337500, actual 337500
>[    8.236883] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0
>[    8.236889] [drm:intel_find_shared_dpll] [CRTC:26:pipe A] allocated DPLL 1
>[    8.236890] [drm:intel_reference_shared_dpll] using DPLL 1 for pipe A
>[    8.236891] [drm:skl_update_scaler_crtc] Updating scaler for [CRTC:26:pipe A] scaler_user index 0.31
>[    8.236893] [drm:skl_update_scaler] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0
>[    8.237399] [drm:intel_disable_pipe] disabling pipe A
>[    8.247959] [drm:intel_disable_shared_dpll] disable DPLL 1 (active 1, on? 1) for crtc 26
>[    8.247999] [drm:intel_disable_shared_dpll] disabling DPLL 1
>[    8.248015] [drm:skl_set_cdclk] Changing CDCLK to 337500 kHz (VCO 8100000 kHz)
>[    8.248037] [drm:intel_update_cdclk] Current CD clock rate: 337500 kHz, VCO: 8100000 kHz, ref: 24000 kHz
>[    8.248039] [drm:verify_encoder_state] [ENCODER:36:DDI B]
>[    8.248040] [drm:verify_encoder_state] [ENCODER:41:DDI C]
>[    8.248043] [drm:verify_encoder_state] [ENCODER:43:DP-MST A]
>[    8.248044] [drm:verify_encoder_state] [ENCODER:44:DP-MST B]
>[    8.248045] [drm:verify_encoder_state] [ENCODER:45:DP-MST C]
>[    8.248046] [drm:intel_connector_verify_state] [CONNECTOR:42:DP-1]
>[    8.248049] [drm:intel_connector_verify_state] [CONNECTOR:46:HDMI-A-2]
>[    8.248051] [drm:verify_single_dpll_state] DPLL 0
>[    8.248056] [drm:verify_single_dpll_state] DPLL 1
>[    8.248059] [drm:verify_single_dpll_state] DPLL 2
>[    8.248063] [drm:verify_single_dpll_state] DPLL 3
>[    8.248068] [drm:intel_enable_shared_dpll] enable DPLL 1 (active 1, on? 0) for crtc 26
>[    8.248069] [drm:intel_enable_shared_dpll] enabling DPLL 1
>[    8.250377] [drm:skylake_pfit_enable] for crtc_state = ffff88025bcca548
>[    8.251109] [drm:intel_enable_pipe] enabling pipe A
>[    8.251137] [drm:intel_audio_codec_enable] ELD on [CONNECTOR:37:HDMI-A-1], [ENCODER:36:DDI B]
>[    8.251139] [drm:hsw_audio_codec_enable] Enable audio codec on pipe A, 32 bytes ELD
>[    8.251220] [drm:audio_config_hdmi_pixel_clock] Configuring HDMI audio for pixel clock 148500 (0x00090000)
>[    8.284649] [drm:intel_connector_verify_state] [CONNECTOR:37:HDMI-A-1]
>[    8.284678] [drm:verify_crtc_state] [CRTC:26:pipe A]
>[    8.284715] [drm:verify_single_dpll_state] DPLL 1
>[    8.284726] [drm:skl_enable_sagv] Enabling the SAGV
>[    8.285008] [drm:drm_fb_helper_hotplug_event] 
>[    8.285010] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1]
>[    8.285013] [drm:intel_hdmi_detect] [CONNECTOR:37:HDMI-A-1]
>[    8.311027] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    8.311029] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    8.311368] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    8.311373] [drm:drm_detect_monitor_audio] Monitor has basic audio support
>[    8.311814] [drm:drm_edid_to_eld] ELD monitor G246HYL
>[    8.311816] [drm:parse_hdmi_vsdb] HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0
>[    8.311817] [drm:drm_edid_to_eld] ELD size 32, SAD count 1
>[    8.312139] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] probed modes :
>[    8.312142] [drm:drm_mode_debug_printmodeline] Modeline 50:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    8.312144] [drm:drm_mode_debug_printmodeline] Modeline 74:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
>[    8.312146] [drm:drm_mode_debug_printmodeline] Modeline 73:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[    8.312148] [drm:drm_mode_debug_printmodeline] Modeline 59:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
>[    8.312150] [drm:drm_mode_debug_printmodeline] Modeline 56:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    8.312152] [drm:drm_mode_debug_printmodeline] Modeline 58:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
>[    8.312153] [drm:drm_mode_debug_printmodeline] Modeline 57:"1280x800" 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
>[    8.312155] [drm:drm_mode_debug_printmodeline] Modeline 55:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    8.312157] [drm:drm_mode_debug_printmodeline] Modeline 52:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    8.312159] [drm:drm_mode_debug_printmodeline] Modeline 76:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    8.312160] [drm:drm_mode_debug_printmodeline] Modeline 72:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[    8.312162] [drm:drm_mode_debug_printmodeline] Modeline 65:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    8.312164] [drm:drm_mode_debug_printmodeline] Modeline 66:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    8.312166] [drm:drm_mode_debug_printmodeline] Modeline 60:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    8.312167] [drm:drm_mode_debug_printmodeline] Modeline 61:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[    8.312169] [drm:drm_mode_debug_printmodeline] Modeline 71:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[    8.312171] [drm:drm_mode_debug_printmodeline] Modeline 77:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
>[    8.312173] [drm:drm_mode_debug_printmodeline] Modeline 53:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    8.312174] [drm:drm_mode_debug_printmodeline] Modeline 62:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
>[    8.312176] [drm:drm_mode_debug_printmodeline] Modeline 78:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    8.312178] [drm:drm_mode_debug_printmodeline] Modeline 54:"640x480" 60 25180 640 648 744 800 480 482 484 525 0x40 0xa
>[    8.312179] [drm:drm_mode_debug_printmodeline] Modeline 63:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    8.312181] [drm:drm_mode_debug_printmodeline] Modeline 64:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    8.312183] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:DP-1]
>[    8.312184] [drm:intel_dp_detect] [CONNECTOR:42:DP-1]
>[    8.312205] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:42:DP-1] disconnected
>[    8.312208] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2]
>[    8.312209] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2]
>[    8.407889] [drm:intel_hdmi_detect] HDMI live status down
>[    8.407895] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected
>[    8.407927] [drm:drm_setup_crtcs] 
>[    8.407972] [drm:drm_enable_connectors] connector 37 enabled? yes
>[    8.407974] [drm:drm_enable_connectors] connector 42 enabled? no
>[    8.407975] [drm:drm_enable_connectors] connector 46 enabled? no
>[    8.407989] [drm:intel_fb_initial_config] looking for cmdline mode on connector HDMI-A-1
>[    8.407991] [drm:intel_fb_initial_config] looking for preferred mode on connector HDMI-A-1 0
>[    8.407993] [drm:intel_fb_initial_config] connector HDMI-A-1 on [CRTC:26:pipe A]: 1920x1080
>[    8.407995] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    8.407996] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    8.408011] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 26 (0,0)
>[    8.408364] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0
>[    8.418407] Console: switching to colour frame buffer device 240x67
>[    8.418875] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0
>[    8.440949] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    8.675090] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    8.868136] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
>[    8.868819] systemd[1]: Detected architecture x86-64.
>[    8.871886] systemd[1]: Set hostname to <skl-nuci5>.
>[    9.026752] systemd[1]: Listening on udev Control Socket.
>[    9.027386] systemd[1]: Listening on udev Kernel Socket.
>[    9.027914] systemd[1]: Listening on Journal Socket (/dev/log).
>[    9.028952] systemd[1]: Created slice System Slice.
>[    9.029399] systemd[1]: Listening on Syslog Socket.
>[    9.030194] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    9.030833] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    9.442318] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
>[    9.500419] systemd-journald[760]: Received request to flush runtime journal from PID 1
>[    9.722526] [drm:gen9_enable_rc6] RC6 on
>[   10.196579] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
>[   10.981807] [drm:asle_set_backlight] bclp = 0x800000ff
>[   10.981812] [drm:asle_set_backlight] updating opregion backlight 255/255
>[   11.121153] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[   11.220950] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0
>[   11.223543] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC283: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
>[   11.223544] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   11.223545] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   11.223546] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[   11.223546] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[   11.223547] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x19
>[   11.387181] Adding 8272892k swap on /dev/sda3.  Priority:-1 extents:1 across:8272892k SSFS
>[   11.501958] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0
>[   11.942334] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0
>[   12.232300] random: crng init done
>[   12.310283] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4
>[   12.322227] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
>[   12.335008] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
>[   12.346504] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
>[   12.360139] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
>[   12.390393] cgroup: new mount options do not match the existing superblock, will be ignored
>[   12.916019] ax88179_178a 1-4:1.0 eth1: register 'ax88179_178a' at usb-0000:00:14.0-4, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:0a:cd:28:8e:d8
>[   12.916434] usbcore: registered new interface driver ax88179_178a
>[   12.943262] ax88179_178a 1-4:1.0 enx000acd288ed8: renamed from eth1
>[   13.158994] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   13.386573] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   13.402590] IPv6: ADDRCONF(NETDEV_UP): enx000acd288ed8: link is not ready
>[   13.737608] IPv6: ADDRCONF(NETDEV_UP): enx000acd288ed8: link is not ready
>[   16.698891] ax88179_178a 1-4:1.0 enx000acd288ed8: ax88179 - Link status is: 1
>[   16.707713] IPv6: ADDRCONF(NETDEV_CHANGE): enx000acd288ed8: link becomes ready
>[   23.428609] [drm:skl_update_scaler_plane] Updating scaler for [PLANE:23:plane 1A] scaler_user index 0.0

Actions: View

Attachments on bug 97607: 126234 | 126235

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.