Attachment 126254 Details for Bug 97060 – dmesg kernel 4.8.0-rc4+

dmesg kernel 4.8.0-rc4+

kern_4.8.log (text/x-log), 113.52 KB, created by Alexey Shumitsky on 2016-09-06 20:31:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alexey Shumitsky

Created: 2016-09-06 20:31:09 UTC

Size: 113.52 KB

patch

obsolete

>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025fdfffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.6 present.
>[    0.000000] DMI: Sony Corporation VPCSE1E1E/VAIO, BIOS R2087H4 06/15/2012
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x25fe00 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-E7FFF write-protect
>[    0.000000]   E8000-EFFFF write-combining
>[    0.000000]   F0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask F80000000 write-back
>[    0.000000]   1 base 080000000 mask FE0000000 write-back
>[    0.000000]   2 base 09B000000 mask FFF000000 uncachable
>[    0.000000]   3 base 09C000000 mask FFC000000 uncachable
>[    0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
>[    0.000000]   5 base 100000000 mask F00000000 write-back
>[    0.000000]   6 base 200000000 mask FC0000000 write-back
>[    0.000000]   7 base 240000000 mask FF0000000 write-back
>[    0.000000]   8 base 250000000 mask FF0000000 write-back
>[    0.000000]   9 base 25FE00000 mask FFFE00000 uncachable
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
>[    0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff91bec00fe1b0]
>[    0.000000] Base memory trampoline at [ffff91bec008e000] 8e000 size 24576
>[    0.000000] reserving inaccessible SNB gfx pages
>[    0.000000] BRK [0x1b276d000, 0x1b276dfff] PGTABLE
>[    0.000000] BRK [0x1b276e000, 0x1b276efff] PGTABLE
>[    0.000000] BRK [0x1b276f000, 0x1b276ffff] PGTABLE
>[    0.000000] BRK [0x1b2770000, 0x1b2770fff] PGTABLE
>[    0.000000] BRK [0x1b2771000, 0x1b2771fff] PGTABLE
>[    0.000000] BRK [0x1b2772000, 0x1b2772fff] PGTABLE
>[    0.000000] BRK [0x1b2773000, 0x1b2773fff] PGTABLE
>[    0.000000] BRK [0x1b2774000, 0x1b2774fff] PGTABLE
>[    0.000000] BRK [0x1b2775000, 0x1b2775fff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x33d66000-0x35eaafff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 Sony  )
>[    0.000000] ACPI: XSDT 0x000000009AFFE120 000094 (v01 Sony   VAIO     20120615      01000013)
>[    0.000000] ACPI: FACP 0x000000009AFFC000 0000F4 (v04 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: DSDT 0x000000009AFF0000 0082C7 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: FACS 0x000000009AF6E000 000040
>[    0.000000] ACPI: FACS 0x000000009AF6E000 000040
>[    0.000000] ACPI: ASF! 0x000000009AFFD000 0000A5 (v32 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: HPET 0x000000009AFFB000 000038 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: APIC 0x000000009AFFA000 00008C (v02 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: MCFG 0x000000009AFF9000 00003C (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: SLIC 0x000000009AFEF000 000176 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: WDAT 0x000000009AFEE000 000224 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: SSDT 0x000000009AFED000 000CA6 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: BOOT 0x000000009AFEB000 000028 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: SSDT 0x000000009AFE9000 00022B (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: ASPT 0x000000009AFE6000 000034 (v07 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: SSDT 0x000000009AFE5000 0007C2 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: SSDT 0x000000009AFE4000 000996 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: SSDT 0x000000009AFE2000 0011B9 (v01 Sony   VAIO     20120615 ACPI 00040000)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025fdfffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x25fdf7000-0x25fdfbfff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000025fdfffff]
>[    0.000000]   Device   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000093fff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x000000009ae3efff]
>[    0.000000]   node   0: [mem 0x000000009afff000-0x000000009affffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000025fdfffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025fdfffff]
>[    0.000000] On node 0 totalpages: 2075603
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 147 pages reserved
>[    0.000000]   DMA zone: 3987 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 9849 pages used for memmap
>[    0.000000]   DMA32 zone: 630336 pages, LIFO batch:31
>[    0.000000]   Normal zone: 22520 pages used for memmap
>[    0.000000]   Normal zone: 1441280 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics memory at 0x000000009ba00000-0x000000009f9fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00094000-0x00094fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00095000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9ae3f000-0x9aebefff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
>[    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] percpu: Embedded 35 pages/cpu @ffff91c11fa00000 s103384 r8192 d31784 u262144
>[    0.000000] pcpu-alloc: s103384 r8192 d31784 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2043023
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-rc4+ root=UUID=ac69bfdf-b90c-42a1-b4a2-09cdb7a58f7e ro drm.debug=0xe
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 8053360K/8302412K available (6162K kernel code, 1164K rwdata, 2788K rodata, 1372K init, 932K bss, 249052K reserved, 0K cma-reserved)
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
>[    0.000000] NR_IRQS:33024 nr_irqs:488 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2394.598 MHz processor
>[    0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.19 BogoMIPS (lpj=9578392)
>[    0.000034] pid_max: default: 32768 minimum: 301
>[    0.000055] ACPI: Core revision 20160422
>[    0.007859] ACPI: 6 ACPI AML tables successfully acquired and loaded
>
>[    0.007916] Security Framework initialized
>[    0.007921] Yama: becoming mindful.
>[    0.007931] AppArmor: AppArmor initialized
>[    0.008353] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.009967] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.010689] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.010702] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.010975] CPU: Physical Processor ID: 0
>[    0.010979] CPU: Processor Core ID: 0
>[    0.010985] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.010989] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.010994] mce: CPU supports 7 MCE banks
>[    0.011005] CPU0: Thermal monitoring enabled (TM1)
>[    0.011016] process: using mwait in idle threads
>[    0.011022] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
>[    0.011026] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>[    0.011451] Freeing SMP alternatives memory: 24K (ffffffff9887c000 - ffffffff98882000)
>[    0.024922] ftrace: allocating 25370 entries in 100 pages
>[    0.036203] smpboot: APIC(0) Converting physical 0 to logical package 0
>[    0.036209] smpboot: Max logical packages: 4
>[    0.036284] x2apic: IRQ remapping doesn't support X2APIC mode
>[    0.036750] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.076441] TSC deadline timer enabled
>[    0.076444] smpboot: CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
>[    0.076453] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
>[    0.076483] core: PEBS disabled due to CPU errata, please upgrade microcode
>[    0.076488] ... version:                3
>[    0.076491] ... bit width:              48
>[    0.076494] ... generic registers:      4
>[    0.076497] ... value mask:             0000ffffffffffff
>[    0.076501] ... max period:             0000ffffffffffff
>[    0.076504] ... fixed-purpose events:   3
>[    0.076507] ... event mask:             000000070000000f
>[    0.077075] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.077185] x86: Booting SMP configuration:
>[    0.077189] .... node  #0, CPUs:      #1 #2 #3
>[    0.318570] x86: Booted up 1 node, 4 CPUs
>[    0.318580] smpboot: Total of 4 processors activated (19160.05 BogoMIPS)
>[    0.333720] devtmpfs: initialized
>[    0.333796] x86/mm: Memory block size: 128MB
>[    0.349679] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
>[    0.349773] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.365603] pinctrl core: initialized pinctrl subsystem
>[    0.381749] NET: Registered protocol family 16
>[    0.397614] cpuidle: using governor ladder
>[    0.413623] cpuidle: using governor menu
>[    0.413686] Simple Boot Flag at 0x44 set to 0x1
>[    0.413718] ACPI: bus type PCI registered
>[    0.413732] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.445784] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.445791] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    0.445806] PCI: Using configuration type 1 for base access
>[    0.445844] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
>[    0.461833] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.509818] ACPI: Added _OSI(Module Device)
>[    0.509822] ACPI: Added _OSI(Processor Device)
>[    0.509825] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.509829] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.510025] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.513175] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.516370] ACPI: Dynamic OEM Table Load:
>[    0.516381] ACPI: SSDT 0xFFFF91C1170A6800 00067C (v01 Sony   VAIO     20120615 INTL 20100121)
>[    0.516899] ACPI: Dynamic OEM Table Load:
>[    0.516908] ACPI: SSDT 0xFFFF91C115DB6800 000303 (v01 Sony   VAIO     20120615 INTL 20100121)
>[    0.517350] ACPI: Dynamic OEM Table Load:
>[    0.517357] ACPI: SSDT 0xFFFF91C115DBC800 000119 (v01 Sony   VAIO     20120615 INTL 20100121)
>[    0.518233] ACPI : EC: EC started
>[    1.078278] ACPI: Interpreter enabled
>[    1.078303] ACPI: (supports S0 S3 S4 S5)
>[    1.078307] ACPI: Using IOAPIC for interrupt routing
>[    1.078338] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    1.083989] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    1.083997] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    1.084038] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
>[    1.084448] PCI host bridge to bus 0000:00
>[    1.084454] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    1.084458] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    1.084462] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    1.084468] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
>[    1.084474] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    1.084484] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
>[    1.084567] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
>[    1.084598] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    1.084630] pci 0000:00:01.0: System wakeup disabled by ACPI
>[    1.084678] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
>[    1.084686] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
>[    1.084692] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
>[    1.084695] pci 0000:00:02.0: reg 0x20: [io  0x8000-0x803f]
>[    1.084813] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
>[    1.084834] pci 0000:00:16.0: reg 0x10: [mem 0xc9404000-0xc940400f 64bit]
>[    1.084910] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    1.084988] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
>[    1.085261] pci 0000:00:1a.0: reg 0x10: [mem 0xc9409000-0xc94093ff]
>[    1.086874] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    1.086925] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    1.086974] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
>[    1.086991] pci 0000:00:1b.0: reg 0x10: [mem 0xc9400000-0xc9403fff 64bit]
>[    1.087067] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    1.087105] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    1.087152] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
>[    1.087229] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    1.087266] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    1.087312] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
>[    1.087389] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    1.087427] pci 0000:00:1c.1: System wakeup disabled by ACPI
>[    1.087473] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
>[    1.087549] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    1.087587] pci 0000:00:1c.2: System wakeup disabled by ACPI
>[    1.087632] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
>[    1.087708] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    1.087747] pci 0000:00:1c.3: System wakeup disabled by ACPI
>[    1.087798] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
>[    1.088071] pci 0000:00:1d.0: reg 0x10: [mem 0xc9408000-0xc94083ff]
>[    1.089680] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    1.089729] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    1.089777] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
>[    1.089946] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
>[    1.089961] pci 0000:00:1f.2: reg 0x10: [io  0x8088-0x808f]
>[    1.089968] pci 0000:00:1f.2: reg 0x14: [io  0x8094-0x8097]
>[    1.089976] pci 0000:00:1f.2: reg 0x18: [io  0x8080-0x8087]
>[    1.089984] pci 0000:00:1f.2: reg 0x1c: [io  0x8090-0x8093]
>[    1.089991] pci 0000:00:1f.2: reg 0x20: [io  0x8060-0x807f]
>[    1.089998] pci 0000:00:1f.2: reg 0x24: [mem 0xc9407000-0xc94077ff]
>[    1.090040] pci 0000:00:1f.2: PME# supported from D3hot
>[    1.090111] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
>[    1.090127] pci 0000:00:1f.3: reg 0x10: [mem 0xc9405000-0xc94050ff 64bit]
>[    1.090147] pci 0000:00:1f.3: reg 0x20: [io  0x8040-0x805f]
>[    1.090281] pci 0000:01:00.0: [1002:6741] type 00 class 0x030000
>[    1.090297] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
>[    1.090307] pci 0000:01:00.0: reg 0x18: [mem 0xc8400000-0xc841ffff 64bit]
>[    1.090314] pci 0000:01:00.0: reg 0x20: [io  0x7000-0x70ff]
>[    1.090325] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[    1.090369] pci 0000:01:00.0: supports D1 D2
>[    1.090391] pci 0000:01:00.0: System wakeup disabled by ACPI
>[    1.102219] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    1.102234] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
>[    1.102240] pci 0000:00:01.0:   bridge window [mem 0xc8400000-0xc93fffff]
>[    1.102247] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
>[    1.102498] pci 0000:02:00.0: [8086:0091] type 00 class 0x028000
>[    1.102674] pci 0000:02:00.0: reg 0x10: [mem 0xc7400000-0xc7401fff 64bit]
>[    1.103374] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    1.103520] pci 0000:02:00.0: System wakeup disabled by ACPI
>[    1.114355] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    1.114362] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
>[    1.114366] pci 0000:00:1c.0:   bridge window [mem 0xc7400000-0xc83fffff]
>[    1.114371] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
>[    1.114457] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
>[    1.114485] pci 0000:03:00.0: reg 0x10: [mem 0xc6400000-0xc6400fff]
>[    1.114679] pci 0000:03:00.0: supports D1 D2
>[    1.114680] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
>[    1.114729] pci 0000:03:00.0: System wakeup disabled by ACPI
>[    1.126247] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    1.126264] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
>[    1.126272] pci 0000:00:1c.1:   bridge window [mem 0xc6400000-0xc73fffff]
>[    1.126284] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
>[    1.126442] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330
>[    1.126471] pci 0000:04:00.0: reg 0x10: [mem 0xc5400000-0xc5401fff 64bit]
>[    1.126620] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
>[    1.126663] pci 0000:04:00.0: System wakeup disabled by ACPI
>[    1.138304] pci 0000:00:1c.2: PCI bridge to [bus 04]
>[    1.138321] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
>[    1.138337] pci 0000:00:1c.2:   bridge window [mem 0xc5400000-0xc63fffff]
>[    1.138342] pci 0000:00:1c.2:   bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
>[    1.138476] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
>[    1.138556] pci 0000:05:00.0: reg 0x10: [io  0x3000-0x30ff]
>[    1.138671] pci 0000:05:00.0: reg 0x18: [mem 0xc3404000-0xc3404fff 64bit pref]
>[    1.138744] pci 0000:05:00.0: reg 0x20: [mem 0xc3400000-0xc3403fff 64bit pref]
>[    1.139133] pci 0000:05:00.0: supports D1 D2
>[    1.139134] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    1.139276] pci 0000:05:00.0: System wakeup disabled by ACPI
>[    1.150292] pci 0000:00:1c.3: PCI bridge to [bus 05]
>[    1.150309] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
>[    1.150317] pci 0000:00:1c.3:   bridge window [mem 0xc4400000-0xc53fffff]
>[    1.150329] pci 0000:00:1c.3:   bridge window [mem 0xc3400000-0xc43fffff 64bit pref]
>[    1.151036] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
>[    1.151101] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
>[    1.151160] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
>[    1.151217] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
>[    1.151273] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
>[    1.151332] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    1.151391] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
>[    1.151450] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
>[    1.151583] ACPI: Enabled 6 GPEs in block 00 to 3F
>[    1.151626] ACPI : EC: EC stopped
>[    1.151664] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>[    1.151668] ACPI : EC: EC started
>[    1.710896] vgaarb: setting as boot device: PCI:0000:00:02.0
>[    1.710901] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    1.710910] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
>[    1.710916] vgaarb: loaded
>[    1.710919] vgaarb: bridge control possible 0000:01:00.0
>[    1.710922] vgaarb: no bridge control possible 0000:00:02.0
>[    1.711002] PCI: Using ACPI for IRQ routing
>[    1.717394] PCI: pci_cache_line_size set to 64 bytes
>[    1.717554] e820: reserve RAM buffer [mem 0x00094400-0x0009ffff]
>[    1.717555] e820: reserve RAM buffer [mem 0x9ae3f000-0x9bffffff]
>[    1.717556] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
>[    1.717557] e820: reserve RAM buffer [mem 0x25fe00000-0x25fffffff]
>[    1.717660] NetLabel: Initializing
>[    1.717664] NetLabel:  domain hash size = 128
>[    1.717667] NetLabel:  protocols = UNLABELED CIPSOv4
>[    1.717685] NetLabel:  unlabeled traffic allowed by default
>[    1.717738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    1.717746] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    1.719773] clocksource: Switched to clocksource hpet
>[    1.726663] VFS: Disk quotas dquot_6.6.0
>[    1.739810] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.755894] AppArmor: AppArmor Filesystem Enabled
>[    1.755951] pnp: PnP ACPI init
>[    1.756159] system 00:00: [io  0x0680-0x069f] has been reserved
>[    1.756164] system 00:00: [io  0x1000-0x100f] has been reserved
>[    1.756168] system 00:00: [io  0xffff] has been reserved
>[    1.756172] system 00:00: [io  0xffff] has been reserved
>[    1.756176] system 00:00: [io  0x0400-0x0453] has been reserved
>[    1.756180] system 00:00: [io  0x0458-0x047f] has been reserved
>[    1.756185] system 00:00: [io  0x0500-0x057f] has been reserved
>[    1.756189] system 00:00: [io  0x164e-0x164f] has been reserved
>[    1.756193] system 00:00: [io  0x2000] has been reserved
>[    1.756197] system 00:00: [io  0x2004] has been reserved
>[    1.756203] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.756232] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    1.756281] system 00:02: [io  0x0454-0x0457] has been reserved
>[    1.756286] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    1.756317] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
>[    1.756347] pnp 00:04: Plug and Play ACPI device, IDs SNYa001 PNP0f13 (active)
>[    1.756492] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    1.756497] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
>[    1.756502] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
>[    1.756506] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
>[    1.756510] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
>[    1.756514] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    1.756519] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
>[    1.756523] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
>[    1.756528] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    1.756532] system 00:05: [mem 0x9fa00000-0x9fa00fff] has been reserved
>[    1.756537] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.756885] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
>[    1.756890] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
>[    1.756895] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    1.756909] pnp: PnP ACPI: found 7 devices
>[    1.763631] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    1.763641] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
>[    1.763684] pci 0000:01:00.0: BAR 6: assigned [mem 0xc8420000-0xc843ffff pref]
>[    1.763691] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    1.763696] pci 0000:00:01.0:   bridge window [io  0x7000-0x7fff]
>[    1.763701] pci 0000:00:01.0:   bridge window [mem 0xc8400000-0xc93fffff]
>[    1.763706] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
>[    1.763714] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    1.763719] pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
>[    1.763727] pci 0000:00:1c.0:   bridge window [mem 0xc7400000-0xc83fffff]
>[    1.763734] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc13fffff 64bit pref]
>[    1.763744] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    1.763750] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
>[    1.763757] pci 0000:00:1c.1:   bridge window [mem 0xc6400000-0xc73fffff]
>[    1.763764] pci 0000:00:1c.1:   bridge window [mem 0xc1400000-0xc23fffff 64bit pref]
>[    1.763782] pci 0000:00:1c.2: PCI bridge to [bus 04]
>[    1.763787] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
>[    1.763795] pci 0000:00:1c.2:   bridge window [mem 0xc5400000-0xc63fffff]
>[    1.763801] pci 0000:00:1c.2:   bridge window [mem 0xc2400000-0xc33fffff 64bit pref]
>[    1.763812] pci 0000:00:1c.3: PCI bridge to [bus 05]
>[    1.763817] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
>[    1.763825] pci 0000:00:1c.3:   bridge window [mem 0xc4400000-0xc53fffff]
>[    1.763831] pci 0000:00:1c.3:   bridge window [mem 0xc3400000-0xc43fffff 64bit pref]
>[    1.763843] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    1.763844] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    1.763846] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    1.763847] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
>[    1.763848] pci_bus 0000:01: resource 0 [io  0x7000-0x7fff]
>[    1.763850] pci_bus 0000:01: resource 1 [mem 0xc8400000-0xc93fffff]
>[    1.763851] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
>[    1.763852] pci_bus 0000:02: resource 0 [io  0x6000-0x6fff]
>[    1.763853] pci_bus 0000:02: resource 1 [mem 0xc7400000-0xc83fffff]
>[    1.763854] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref]
>[    1.763856] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
>[    1.763857] pci_bus 0000:03: resource 1 [mem 0xc6400000-0xc73fffff]
>[    1.763858] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref]
>[    1.763859] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
>[    1.763860] pci_bus 0000:04: resource 1 [mem 0xc5400000-0xc63fffff]
>[    1.763861] pci_bus 0000:04: resource 2 [mem 0xc2400000-0xc33fffff 64bit pref]
>[    1.763863] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
>[    1.763864] pci_bus 0000:05: resource 1 [mem 0xc4400000-0xc53fffff]
>[    1.763865] pci_bus 0000:05: resource 2 [mem 0xc3400000-0xc43fffff 64bit pref]
>[    1.859784] NET: Registered protocol family 2
>[    1.875901] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    1.876039] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    1.876169] TCP: Hash tables configured (established 65536 bind 65536)
>[    1.876198] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    1.876228] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    1.891893] NET: Registered protocol family 1
>[    1.891912] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    1.943715] PCI: CLS 64 bytes, default 64
>[    1.943777] Unpacking initramfs...
>[    2.508091] Freeing initrd memory: 34068K (ffff91bef3d66000 - ffff91bef5eab000)
>[    2.508102] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    2.508107] software IO TLB [mem 0x96e3f000-0x9ae3f000] (64MB) mapped at [ffff91bf56e3f000-ffff91bf5ae3efff]
>[    2.508337] simple-framebuffer simple-framebuffer.0: framebuffer at 0xb0000000, 0x7e9000 bytes, mapped to 0xffffc3ae41000000
>[    2.508344] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1920x1080x32, linelength=7680
>[    2.513044] Console: switching to colour frame buffer device 240x67
>[    2.517693] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
>[    2.540049] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    2.555782] audit: initializing netlink subsys (disabled)
>[    2.555883] audit: type=2000 audit(1473200360.548:1): initialized
>[    2.556296] Initialise system trusted keyrings
>[    2.556412] workingset: timestamp_bits=40 max_order=21 bucket_order=0
>[    2.556448] zbud: loaded
>[    2.620798] Key type asymmetric registered
>[    2.620818] Asymmetric key parser 'x509' registered
>[    2.635788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
>[    2.635911] io scheduler noop registered
>[    2.635930] io scheduler deadline registered
>[    2.635954] io scheduler cfq registered (default)
>[    2.636440] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    2.636469] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    2.636508] intel_idle: MWAIT substates: 0x21120
>[    2.636509] intel_idle: v0.4.1 model 0x2A
>[    2.636674] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    2.636855] GHES: HEST is not enabled!
>[    2.636925] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    2.637366] Linux agpgart interface v0.103
>[    2.637429] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
>[    2.637454] AMD IOMMUv2 functionality not available on this system
>[    2.637826] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    2.640361] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    2.640386] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    2.640600] mousedev: PS/2 mouse device common for all mice
>[    2.640663] rtc_cmos 00:01: RTC can wake from S4
>[    2.640846] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>[    2.640896] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    2.640935] intel_pstate: Intel P-state driver initializing
>[    2.641309] ledtrig-cpu: registered to indicate activity on CPUs
>[    2.660057] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    2.747878] NET: Registered protocol family 10
>[    2.763938] mip6: Mobile IPv6
>[    2.763958] NET: Registered protocol family 17
>[    2.763979] mpls_gso: MPLS GSO support
>[    2.764277] microcode: sig=0x206a7, pf=0x10, revision=0x14
>[    2.764416] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    2.764807] registered taskstats version 1
>[    2.764827] Loading compiled-in X.509 certificates
>[    2.768246] alg: No test for pkcs1pad(rsa,sha512) (pkcs1pad(rsa-generic,sha512))
>[    2.769118] Loaded X.509 cert 'Build time autogenerated kernel key: b3359c5073e04488eb70a15a75274251227ea32b'
>[    2.769170] zswap: loaded using pool lzo/zbud
>[    2.769288] AppArmor: AppArmor sha1 policy hashing enabled
>[    2.770909] rtc_cmos 00:01: setting system clock to 2016-09-06 22:19:21 UTC (1473200361)
>[    2.772190] PM: Hibernation image not present or could not be loaded.
>[    2.773201] Freeing unused kernel memory: 1372K (ffffffff98725000 - ffffffff9887c000)
>[    2.774362] Write protecting the kernel read-only data: 12288k
>[    2.775947] Freeing unused kernel memory: 2016K (ffff91c071e08000 - ffff91c072000000)
>[    2.779534] Freeing unused kernel memory: 1308K (ffff91c0722b9000 - ffff91c072400000)
>[    2.787349] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    2.800293] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    2.800816] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.800843] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.801724] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.801769] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.801780] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.802089] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.802132] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.802174] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.802216] random: udevadm: uninitialized urandom read (16 bytes read)
>[    2.823487] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
>[    2.827732] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
>[    2.829542] ACPI: Lid Switch [LID0]
>[    2.831531] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
>[    2.833306] ACPI: Power Button [PWRB]
>[    2.849279] thermal LNXTHERM:00: registered as thermal_zone0
>[    2.850998] ACPI: Thermal Zone [TZ01] (70 C)
>[    2.863261] [drm:drm_core_init] Initialized drm 1.1.0 20060810
>[    2.869345] ACPI: bus type USB registered
>[    2.871240] usbcore: registered new interface driver usbfs
>[    2.875324] usbcore: registered new interface driver hub
>[    2.884774] SCSI subsystem initialized
>[    2.889377] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    2.891218] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
>[    2.893698] r8169 0000:05:00.0 eth0: RTL8168e/8111e at 0xffffc3ae40c6a000, f0:bf:97:cf:95:26, XID 0c200000 IRQ 25
>[    2.895621] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>[    2.901095] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 26
>[    2.903797] usbcore: registered new device driver usb
>[    2.913214] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    2.921140] xhci_hcd 0000:04:00.0: xHCI Host Controller
>[    2.923081] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
>[    2.925192] ehci-pci: EHCI PCI platform driver
>[    2.926808] xhci_hcd 0000:04:00.0: hcc params 0x014042c3 hci version 0x96 quirks 0x00000004
>[    2.929886] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.931864] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.933854] usb usb1: Product: xHCI Host Controller
>[    2.935829] usb usb1: Manufacturer: Linux 4.8.0-rc4+ xhci-hcd
>[    2.937781] usb usb1: SerialNumber: 0000:04:00.0
>[    2.939916] hub 1-0:1.0: USB hub found
>[    2.941215] libata version 3.00 loaded.
>[    2.944234] hub 1-0:1.0: 2 ports detected
>[    2.946368] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    2.948360] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2
>[    2.950107] ehci-pci 0000:00:1a.0: debug port 2
>[    2.952401] [drm:radeon_init] radeon kernel modesetting enabled.
>[    2.954084] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
>[    2.955870] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    2.955887] ATPX version 1, functions 0x00000032
>[    2.955932] xhci_hcd 0000:04:00.0: xHCI Host Controller
>[    2.955938] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
>[    2.955976] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
>[    2.956001] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
>[    2.956002] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.956004] usb usb3: Product: xHCI Host Controller
>[    2.956005] usb usb3: Manufacturer: Linux 4.8.0-rc4+ xhci-hcd
>[    2.956006] usb usb3: SerialNumber: 0000:04:00.0
>[    2.956171] hub 3-0:1.0: USB hub found
>[    2.956181] hub 3-0:1.0: 2 ports detected
>[    2.961465] ehci-pci 0000:00:1a.0: irq 23, io mem 0xc9409000
>[    2.979775] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    2.981512] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.983170] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.984849] usb usb2: Product: EHCI Host Controller
>[    2.986486] usb usb2: Manufacturer: Linux 4.8.0-rc4+ ehci_hcd
>[    2.988149] usb usb2: SerialNumber: 0000:00:1a.0
>[    2.990743] hub 2-0:1.0: USB hub found
>[    2.992386] CRAT table not found
>[    2.993330] hub 2-0:1.0: 2 ports detected
>[    2.995718] Finished initializing topology ret=0
>[    2.995740] [drm:intel_detect_pch] Found CougarPoint PCH
>[    2.995743] [drm:get_allowed_dc_mask] Allowed DC state mask 00
>[    2.997379] kfd kfd: Initialized module
>[    2.999139] checking generic (b0000000 7e9000) vs hw (a0000000 10000000)
>[    2.999165] radeon 0000:01:00.0: enabling device (0000 -> 0003)
>[    3.002039] [drm:radeon_device_init] initializing kernel modesetting (TURKS 0x1002:0x6741 0x104D:0x907B 0x00).
>[    3.003745] [drm:radeon_device_init] register mmio base: 0xC8400000
>[    3.004083] [drm:intel_device_info_dump] i915 device info: gen=6, pciid=0x0116 rev=0x09 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,has_llc,
>[    3.004083] [drm:intel_device_info_runtime_init] slice mask: 0000
>[    3.004084] [drm:intel_device_info_runtime_init] slice total: 0
>[    3.004085] [drm:intel_device_info_runtime_init] subslice total: 0
>[    3.004086] [drm:intel_device_info_runtime_init] subslice mask 0000
>[    3.004087] [drm:intel_device_info_runtime_init] subslice per slice: 0
>[    3.004088] [drm:intel_device_info_runtime_init] EU total: 0
>[    3.004088] [drm:intel_device_info_runtime_init] EU per subslice: 0
>[    3.004089] [drm:intel_device_info_runtime_init] has slice power gating: n
>[    3.004090] [drm:intel_device_info_runtime_init] has subslice power gating: n
>[    3.004091] [drm:intel_device_info_runtime_init] has EU power gating: n
>[    3.004093] [drm:intel_sanitize_options] ppgtt mode: 1
>[    3.004094] [drm:intel_sanitize_options] use GPU sempahores? yes
>[    3.004101] [drm:i915_ggtt_probe_hw] Memory usable by graphics device = 2048M
>[    3.004102] [drm:i915_ggtt_probe_hw] GMADR size = 256M
>[    3.004103] [drm:i915_ggtt_probe_hw] GTT stolen size = 64M
>[    3.004105] checking generic (b0000000 7e9000) vs hw (b0000000 10000000)
>[    3.004106] fb: switching to inteldrmfb from simple
>[    3.008442] [drm:radeon_device_init] register mmio size: 131072
>[    3.008466] Console: switching to colour dummy device 80x25
>[    3.008560] [drm:i915_kick_out_vgacon] Replacing VGA console driver
>[    3.008606] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 65536K
>[    3.008613] [drm:intel_opregion_setup] graphic opregion physical addr: 0x9af66018
>[    3.008621] [drm:intel_opregion_setup] Public ACPI methods supported
>[    3.008622] [drm:intel_opregion_setup] SWSCI supported
>[    3.034061] [drm:swsci_setup] SWSCI GBDA callbacks 00000cf3, SBCB callbacks 00000241
>[    3.034063] [drm:intel_opregion_setup] ASLE supported
>[    3.034064] [drm:intel_opregion_setup] ASLE extension supported
>[    3.034066] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    3.034109] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    3.034121] [drm:drm_vblank_init] Driver supports precise vblank timestamp query.
>[    3.034130] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
>[    3.034132] [drm:intel_bios_init] VBT signature "$VBT SANDYBRIDGE-M  ", BDB version 161
>[    3.034134] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    3.034135] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
>[    3.038977] [drm:swsci] GBDA get panel details 0x00000020 0x00020100
>[    3.038981] [drm:parse_lfp_panel_data] Panel type: 0 (OpRegion)
>[    3.038982] [drm:parse_lfp_panel_data] DRRS supported mode is static
>[    3.038986] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
>[    3.038989] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 76110 1366 1397 1462 1560 768 772 784 814 0x8 0xa
>[    3.038990] [drm:parse_lfp_panel_data] VBT initial LVDS value 300
>[    3.038992] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 210 Hz, active high, min brightness 5, level 44
>[    3.038994] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
>[    3.038997] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    3.038998] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
>[    3.039000] [drm:parse_driver_features] DRRS State Enabled:0
>[    3.039002] [drm:parse_psr] No PSR BDB found.
>[    3.044805] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    3.044815] [drm:intel_dsm_pci_probe] no _DSM method for intel device
>[    3.044818] vga_switcheroo: enabled
>[    3.044837] [drm:intel_update_rawclk] rawclk rate: 125000 kHz
>[    3.044840] [drm:intel_power_well_enable] enabling always-on
>[    3.045166] [drm:intel_fbc_init] Sanitized enable_fbc value: 0
>[    3.045170] [drm:intel_print_wm_latency] Primary WM0 latency 7 (0.7 usec)
>[    3.045171] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec)
>[    3.045173] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec)
>[    3.045174] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec)
>[    3.045175] [drm:intel_print_wm_latency] Sprite WM0 latency 7 (0.7 usec)
>[    3.045176] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec)
>[    3.045178] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec)
>[    3.045179] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec)
>[    3.045180] [drm:intel_print_wm_latency] Cursor WM0 latency 7 (0.7 usec)
>[    3.045181] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec)
>[    3.045183] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec)
>[    3.045184] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec)
>[    3.045185] [drm:snb_wm_latency_quirk] WM latency values increased to avoid potential underruns
>[    3.045186] [drm:intel_print_wm_latency] Primary WM0 latency 12 (1.2 usec)
>[    3.045187] [drm:intel_print_wm_latency] Primary WM1 latency 3 (1.5 usec)
>[    3.045189] [drm:intel_print_wm_latency] Primary WM2 latency 4 (2.0 usec)
>[    3.045190] [drm:intel_print_wm_latency] Primary WM3 latency 22 (11.0 usec)
>[    3.045191] [drm:intel_print_wm_latency] Sprite WM0 latency 12 (1.2 usec)
>[    3.045193] [drm:intel_print_wm_latency] Sprite WM1 latency 3 (1.5 usec)
>[    3.045194] [drm:intel_print_wm_latency] Sprite WM2 latency 4 (2.0 usec)
>[    3.045195] [drm:intel_print_wm_latency] Sprite WM3 latency 22 (11.0 usec)
>[    3.045196] [drm:intel_print_wm_latency] Cursor WM0 latency 12 (1.2 usec)
>[    3.045197] [drm:intel_print_wm_latency] Cursor WM1 latency 3 (1.5 usec)
>[    3.045199] [drm:intel_print_wm_latency] Cursor WM2 latency 4 (2.0 usec)
>[    3.045200] [drm:intel_print_wm_latency] Cursor WM3 latency 22 (11.0 usec)
>[    3.045203] [drm:intel_modeset_init] 2 display pipes available.
>[    3.045221] [drm:intel_update_cdclk] Current CD clock rate: 400000 kHz
>[    3.045223] [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz
>[    3.045224] [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz
>[    3.045228] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
>[    3.045239] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
>[    3.045579] [drm:intel_lvds_pps_get_hw_state] LVDS PPS:t1+t2 500 t3 500 t4 6000 t5 2300 tx 2300 divider 6249 port 0 powerdown_on_reset 1
>[    3.045889] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
>[    3.045890] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] NAK on first message, retry
>[    3.046046] [drm:do_gmbus_xfer] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
>[    3.046050] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus panel
>[    3.046053] [drm:intel_lvds_init] using mode from VBT: 
>[    3.046056] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 76110 1366 1397 1462 1560 768 772 784 814 0x8 0xa
>[    3.046061] [drm:intel_panel_setup_backlight] Connector LVDS-1 backlight initialized, enabled, brightness 4648/4648
>[    3.046064] [drm:intel_lvds_init] detected dual-link lvds configuration
>[    3.046082] [drm:intel_crt_reset] crt adpa set to 0xf40000
>[    3.046086] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    3.046828] [drm:intel_sdvo_read_byte] i2c transfer returned -6
>[    3.046829] [drm:intel_sdvo_init] No SDVO device found on SDVOB
>[    3.046848] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    3.046850] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B
>[    3.046865] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    3.046874] [drm:intel_hdmi_init_connector] Adding HDMI connector on port C
>[    3.046882] [drm:intel_dp_init_connector] Adding DP connector on port C
>[    3.046889] [drm:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 has_ck505 0 using_ssc_source 1
>[    3.046892] [drm:ironlake_init_pch_refclk] Using SSC on panel
>[    3.047318] [drm:intel_modeset_readout_hw_state] [CRTC:26:pipe A] hw state readout: enabled
>[    3.047320] [drm:intel_modeset_readout_hw_state] [CRTC:30:pipe B] hw state readout: disabled
>[    3.047324] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: crtc_mask 0x00000001, on 1
>[    3.047328] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0
>[    3.047332] [drm:intel_modeset_readout_hw_state] [ENCODER:33:LVDS] hw state readout: enabled, pipe A
>[    3.047335] [drm:intel_modeset_readout_hw_state] [ENCODER:37:CRT] hw state readout: disabled, pipe A
>[    3.047337] [drm:intel_modeset_readout_hw_state] [ENCODER:38:HDMI B] hw state readout: disabled, pipe A
>[    3.047340] [drm:intel_modeset_readout_hw_state] [ENCODER:43:DP B] hw state readout: disabled, pipe A
>[    3.047342] [drm:intel_modeset_readout_hw_state] [ENCODER:45:HDMI C] hw state readout: disabled, pipe A
>[    3.047345] [drm:intel_modeset_readout_hw_state] [ENCODER:47:DP C] hw state readout: disabled, pipe A
>[    3.047347] [drm:intel_modeset_readout_hw_state] [CONNECTOR:32:LVDS-1] hw state readout: enabled
>[    3.047350] [drm:intel_modeset_readout_hw_state] [CONNECTOR:36:VGA-1] hw state readout: disabled
>[    3.047352] [drm:intel_modeset_readout_hw_state] [CONNECTOR:39:HDMI-A-1] hw state readout: disabled
>[    3.047355] [drm:intel_modeset_readout_hw_state] [CONNECTOR:44:DP-1] hw state readout: disabled
>[    3.047356] [drm:intel_modeset_readout_hw_state] [CONNECTOR:46:HDMI-A-2] hw state readout: disabled
>[    3.047358] [drm:intel_modeset_readout_hw_state] [CONNECTOR:48:DP-2] hw state readout: disabled
>[    3.047368] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][setup_hw_state] config ffff91c10e08e800 for pipe A
>[    3.047369] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    3.047369] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0
>[    3.047371] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 4, gmch_m: 2520077, gmch_n: 8388608, link_m: 280008, link_n: 524288, tu: 64
>[    3.047372] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.047373] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    3.047374] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    3.047374] [drm:intel_dump_pipe_config] requested mode:
>[    3.047376] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 144286 1920 1968 2040 2116 1080 1083 1088 1137 0x40 0xa
>[    3.047377] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.047378] [drm:drm_mode_debug_printmodeline] Modeline 0:"1920x1080" 60 144286 1920 1968 2040 2116 1080 1083 1088 1137 0x40 0xa
>[    3.047379] [drm:intel_dump_crtc_timings] crtc timings: 144286 1920 1968 2040 2116 1080 1083 1088 1137, type: 0x40 flags: 0xa
>[    3.047380] [drm:intel_dump_pipe_config] port clock: 144286
>[    3.047381] [drm:intel_dump_pipe_config] pipe src size: 1920x1080
>[    3.047382] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    3.047383] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.047383] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[    3.047384] [drm:intel_dump_pipe_config] ips: 0
>[    3.047385] [drm:intel_dump_pipe_config] double wide: 0
>[    3.047386] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x89046004, dpll_md: 0x0, fp0: 0x21009, fp1: 0x30d07
>[    3.047386] [drm:intel_dump_pipe_config] planes on this crtc
>[    3.047387] [drm:intel_dump_pipe_config] [PLANE:23:primary A] disabled, scaler_id = 0
>[    3.047388] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = 0
>[    3.047389] [drm:intel_dump_pipe_config] [PLANE:27:sprite A] disabled, scaler_id = 0
>[    3.047390] [drm:intel_dump_pipe_config] [CRTC:30:pipe B][setup_hw_state] config ffff91c10ee6d800 for pipe B
>[    3.047391] [drm:intel_dump_pipe_config] cpu_transcoder: B
>[    3.047392] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
>[    3.047393] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.047394] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    3.047395] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    3.047395] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    3.047396] [drm:intel_dump_pipe_config] requested mode:
>[    3.047397] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.047398] [drm:intel_dump_pipe_config] adjusted mode:
>[    3.047399] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.047400] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    3.047401] [drm:intel_dump_pipe_config] port clock: 0
>[    3.047402] [drm:intel_dump_pipe_config] pipe src size: 0x0
>[    3.047402] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    3.047403] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    3.047404] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.047405] [drm:intel_dump_pipe_config] ips: 0
>[    3.047405] [drm:intel_dump_pipe_config] double wide: 0
>[    3.047406] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[    3.047407] [drm:intel_dump_pipe_config] planes on this crtc
>[    3.047407] [drm:intel_dump_pipe_config] [PLANE:28:primary B] disabled, scaler_id = 0
>[    3.047408] [drm:intel_dump_pipe_config] [PLANE:29:cursor B] disabled, scaler_id = 0
>[    3.047409] [drm:intel_dump_pipe_config] [PLANE:31:sprite B] disabled, scaler_id = 0
>[    3.047415] [drm:ironlake_get_initial_plane_config] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    3.047417] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    3.047420] [drm:i915_pages_create_for_stolen] offset=0x0, size=8294400
>[    3.047425] [drm:intel_alloc_initial_plane_obj] initial plane fb obj ffff91c10ebfd080
>[    3.047445] [drm:i915_gem_init_ggtt] clearing unused GTT space: [7e9000, 7ffff000]
>[    3.049142] [drm:gen6_ppgtt_init] Allocated pde space (2M) at GTT entry: 7fdf0
>[    3.049930] [drm:i915_gem_context_init] HW context support initialized
>[    3.049985] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[    3.049988] [drm:i915_pages_create_for_stolen] offset=0x7e9000, size=131072
>[    3.049997] [drm:init_status_page] render ring hws offset: 0x7fde2000
>[    3.049999] [drm:i915_gem_object_create_stolen] creating stolen object: size=1000
>[    3.050001] [drm:i915_pages_create_for_stolen] offset=0x809000, size=4096
>[    3.050003] [drm:intel_engine_create_scratch] render ring pipe control offset: 0x7fffe000
>[    3.050022] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[    3.050024] [drm:i915_pages_create_for_stolen] offset=0x80a000, size=131072
>[    3.050032] [drm:init_status_page] blitter ring hws offset: 0x00809000
>[    3.050050] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
>[    3.050052] [drm:i915_pages_create_for_stolen] offset=0x82a000, size=131072
>[    3.050059] [drm:init_status_page] bsd ring hws offset: 0x0082a000
>[    3.050096] [drm:intel_guc_setup] GuC fw status: path (null), fetch NONE, load NONE
>[    3.050104] [drm:intel_init_gt_powersave] Overclocking supported, max: 1200MHz, overclock: 1200MHz
>[    3.050106] [drm:intel_update_cdclk] Current CD clock rate: 400000 kHz
>[    3.050121] [drm:gen6_check_mch_setup] Wrong MCH_SSKPD value: 0x16040307 This can cause underruns.
>[    3.050141] [drm:intel_fbdev_init_bios] found possible fb from plane A
>[    3.050142] [drm:intel_fbdev_init_bios] pipe B not active or no fb, skipping
>[    3.050142] [drm:intel_fbdev_init_bios] checking plane A for BIOS fb
>[    3.050144] [drm:intel_fbdev_init_bios] pipe A area: 1920x1080, bpp: 32, size: 8294400
>[    3.050145] [drm:intel_fbdev_init_bios] fb big enough for plane A (8294400 >= 8294400)
>[    3.050146] [drm:intel_fbdev_init_bios] pipe B not active, skipping
>[    3.050147] [drm:intel_fbdev_init_bios] using BIOS fb for initial console
>[    3.050160] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=0
>[    3.050163] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
>[    3.059794] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[    3.059795] [drm:intel_crt_detect] CRT not detected via hotplug
>[    3.060136] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.060137] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    3.060312] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.060317] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.060318] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.060319] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.061059] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.061060] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.061061] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.061073] [drm:drm_helper_hpd_irq_event] [CONNECTOR:36:VGA-1] status updated from unknown to disconnected
>[    3.061075] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1]
>[    3.064110] ATOM BIOS: Sony
>[    3.064265] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
>[    3.064270] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
>[    3.064276] [drm:radeon_bo_init] Detected VRAM RAM=1024M, BAR=256M
>[    3.064279] [drm:radeon_bo_init] RAM width 128bits DDR
>[    3.064372] [TTM] Zone  kernel: Available graphics memory: 4046074 kiB
>[    3.064376] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[    3.064379] [TTM] Initializing pool allocator
>[    3.064386] [TTM] Initializing DMA pool allocator
>[    3.064416] [drm:radeon_ttm_init] radeon: 1024M of VRAM memory ready
>[    3.064420] [drm:radeon_ttm_init] radeon: 1024M of GTT memory ready.
>[    3.064434] [drm:ni_init_microcode] Loading TURKS Microcode
>[    3.064514] [drm:radeon_atombios_add_pplib_thermal_controller] Internal thermal controller without fan control
>[    3.068819] [drm:radeon_pm_init_dpm] radeon: dpm initialized
>[    3.068892] [drm:radeon_gart_init] GART: num cpu pages 262144, num gpu pages 262144
>[    3.069439] [drm:evergreen_pcie_gen2_enable] PCIE gen 2 link speeds already enabled
>[    3.072029] [drm:evergreen_pcie_gart_enable] PCIE GART of 1024M enabled (table at 0x0000000000162000).
>[    3.072141] radeon 0000:01:00.0: WB enabled
>[    3.072145] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff91c10e398c00
>[    3.072150] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff91c10e398c0c
>[    3.072906] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc3ae41032118
>[    3.072912] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    3.072917] [drm:drm_vblank_init] Driver supports precise vblank timestamp query.
>[    3.072922] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
>[    3.072962] radeon 0000:01:00.0: radeon: using MSI.
>[    3.073015] [drm:radeon_irq_kms_init] radeon: irq initialized.
>[    3.089657] [drm:r600_ring_test] ring test on 0 succeeded in 3 usecs
>[    3.089671] [drm:r600_dma_ring_test] ring test on 3 succeeded in 7 usecs
>[    3.219767] [drm:intel_hdmi_detect] HDMI live status down
>[    3.220108] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    3.220109] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    3.220285] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    3.220290] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.220472] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    3.220473] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    3.220652] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    3.220656] [drm:drm_helper_hpd_irq_event] [CONNECTOR:39:HDMI-A-1] status updated from unknown to disconnected
>[    3.220657] [drm:intel_dp_detect] [CONNECTOR:44:DP-1]
>[    3.220661] [drm:drm_helper_hpd_irq_event] [CONNECTOR:44:DP-1] status updated from unknown to disconnected
>[    3.220662] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2]
>[    3.265561] [drm:uvd_v1_0_ring_test] ring test on 5 succeeded in 2 usecs
>[    3.265571] [drm:uvd_v1_0_init] UVD initialized successfully.
>[    3.265832] [drm:r600_ib_test] ib test on ring 0 succeeded in 0 usecs
>[    3.265911] [drm:r600_dma_ib_test] ib test on ring 3 succeeded in 0 usecs
>[    3.323767] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    3.379764] [drm:intel_hdmi_detect] HDMI live status down
>[    3.380100] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.380101] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.380281] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.380285] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.380466] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.380468] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.380647] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.380650] [drm:drm_helper_hpd_irq_event] [CONNECTOR:46:HDMI-A-2] status updated from unknown to disconnected
>[    3.380651] [drm:intel_dp_detect] [CONNECTOR:48:DP-2]
>[    3.380655] [drm:drm_helper_hpd_irq_event] [CONNECTOR:48:DP-2] status updated from unknown to disconnected
>[    3.472685] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>[    3.472692] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    3.473079] hub 2-1:1.0: USB hub found
>[    3.473153] hub 2-1:1.0: 6 ports detected
>[    3.523777] tsc: Refined TSC clocksource calibration: 2394.560 MHz
>[    3.523806] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284248580e, max_idle_ns: 440795288736 ns
>[    3.650717] psmouse serio1: synaptics: queried max coordinates: x [..5508], y [..4550]
>[    3.680278] random: fast init done
>[    3.706887] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400/0x0, board id: 0, fw id: 886330
>[    3.742887] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
>[    3.759856] usb 2-1.2: new full-speed USB device number 3 using ehci-pci
>[    3.873089] usb 2-1.2: New USB device found, idVendor=8086, idProduct=0189
>[    3.873096] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    3.939969] [drm:uvd_v1_0_ib_test] ib test on ring 5 succeeded
>[    3.945657] [drm:radeon_print_display_setup] Radeon Display Connectors
>[    3.951852] usb 2-1.3: new high-speed USB device number 4 using ehci-pci
>[    3.957596] [drm:radeon_acpi_init] Call to ATCS verify_interface failed: -5
>[    3.957599] [drm:radeon_acpi_init] Call to ATIF verify_interface failed: -5
>[    3.957609] [drm:drm_get_pci_dev] Initialized radeon 2.47.0 20080528 for 0000:01:00.0 on minor 1
>[    3.957870] [drm:intel_backlight_device_register] Connector LVDS-1 backlight sysfs interface registered
>[    3.957973] [drm:intel_dp_connector_register] registering DPDDC-B bus for card0-DP-1
>[    3.958074] [drm:intel_dp_connector_register] registering DPDDC-C bus for card0-DP-2
>[    3.958411] [drm:intel_didl_outputs] 8 outputs detected
>[    3.958456] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
>[    3.958949] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
>[    3.959948] acpi LNXVIDEO:02: registered as cooling_device4
>[    3.960019] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:26/LNXVIDEO:00/input/input5
>[    3.960070] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
>[    3.960086] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
>[    3.960104] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
>[    3.960124] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
>[    3.960145] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
>[    3.960159] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
>[    3.960175] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
>[    3.960641] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    3.961441] acpi device:29: registered as cooling_device5
>[    3.961551] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:09/input/input6
>[    3.961596] [drm:i915_driver_load] Initialized i915 1.6.0 20160902 for 0000:00:02.0 on minor 0
>[    3.961599] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1]
>[    3.961601] [drm:intel_lvds_detect] [CONNECTOR:32:LVDS-1]
>[    3.961603] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] status updated from unknown to connected
>[    3.961612] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] probed modes :
>[    3.961615] [drm:drm_mode_debug_printmodeline] Modeline 51:"1366x768" 60 76110 1366 1397 1462 1560 768 772 784 814 0x8 0xa
>[    3.961617] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1]
>[    3.961618] [drm:asle_set_backlight] bclp = 0x800000ff
>[    3.961620] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=1
>[    3.961621] [drm:asle_set_backlight] updating opregion backlight 255/255
>[    3.961623] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4648
>[    3.961625] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[    3.961626] [drm:intel_crt_detect] CRT not detected via hotplug
>[    3.961675] ahci 0000:00:1f.2: version 3.0
>[    3.961813] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
>[    3.961943] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.961945] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    3.962102] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    3.962107] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.962108] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.962110] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.962819] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    3.962821] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.962823] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.962825] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] disconnected
>[    3.962827] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1]
>[    3.962829] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1]
>[    3.971944] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x11 impl RAID mode
>[    3.971953] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part apst 
>[    3.972818] scsi host0: ahci
>[    3.972983] scsi host1: ahci
>[    3.973103] scsi host2: ahci
>[    3.973198] scsi host3: ahci
>[    3.973280] scsi host4: ahci
>[    3.973364] scsi host5: ahci
>[    3.973412] ata1: SATA max UDMA/133 abar m2048@0xc9407000 port 0xc9407100 irq 34
>[    3.973417] ata2: DUMMY
>[    3.973420] ata3: DUMMY
>[    3.973423] ata4: DUMMY
>[    3.973427] ata5: SATA max UDMA/133 abar m2048@0xc9407000 port 0xc9407300 irq 34
>[    3.973431] ata6: DUMMY
>[    3.973585] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    3.973597] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
>[    3.973613] ehci-pci 0000:00:1d.0: debug port 2
>[    3.977527] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    3.977557] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc9408000
>[    4.047859] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    4.048010] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
>[    4.048015] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    4.048020] usb usb4: Product: EHCI Host Controller
>[    4.048023] usb usb4: Manufacturer: Linux 4.8.0-rc4+ ehci_hcd
>[    4.048026] usb usb4: SerialNumber: 0000:00:1d.0
>[    4.048257] hub 4-0:1.0: USB hub found
>[    4.048267] hub 4-0:1.0: 2 ports detected
>[    4.069833] usb 2-1.3: New USB device found, idVendor=05ca, idProduct=18c0
>[    4.069840] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    4.069845] usb 2-1.3: Product: USB2.0 Camera
>[    4.069848] usb 2-1.3: Manufacturer: Ricoh Company Ltd.
>[    4.127938] [drm:intel_hdmi_detect] HDMI live status down
>[    4.128327] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.128332] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.128555] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    4.128567] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    4.128798] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.128802] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    4.129037] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    4.129047] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] disconnected
>[    4.129054] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1]
>[    4.129057] [drm:intel_dp_detect] [CONNECTOR:44:DP-1]
>[    4.129065] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] disconnected
>[    4.129067] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2]
>[    4.129070] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2]
>[    4.287790] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    4.287832] [drm:intel_hdmi_detect] HDMI live status down
>[    4.288352] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    4.288354] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    4.288682] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    4.288687] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    4.289025] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    4.289026] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    4.289373] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    4.289377] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected
>[    4.289379] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2]
>[    4.289381] [drm:intel_dp_detect] [CONNECTOR:48:DP-2]
>[    4.289384] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] disconnected
>[    4.289387] [drm:drm_setup_crtcs] 
>[    4.289391] [drm:drm_enable_connectors] connector 32 enabled? yes
>[    4.289392] [drm:drm_enable_connectors] connector 36 enabled? no
>[    4.289393] [drm:drm_enable_connectors] connector 39 enabled? no
>[    4.289394] [drm:drm_enable_connectors] connector 44 enabled? no
>[    4.289395] [drm:drm_enable_connectors] connector 46 enabled? no
>[    4.289396] [drm:drm_enable_connectors] connector 48 enabled? no
>[    4.289399] [drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1
>[    4.289400] [drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1 0
>[    4.289402] [drm:intel_fb_initial_config] connector LVDS-1 on [CRTC:26:pipe A]: 1366x768
>[    4.289403] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[    4.289404] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    4.289405] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    4.289405] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    4.289406] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    4.289408] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 26 (0,0)
>[    4.289411] [drm:intelfb_create] re-using BIOS fb
>[    4.289429] [drm:intelfb_create] allocated 1920x1080 fb: 0x00000000
>[    4.289560] fbcon: inteldrmfb (fb0) is primary device
>[    4.289632] [drm:connected_sink_compute_bpp] [CONNECTOR:32:LVDS-1] checking for sink bpp constrains
>[    4.289633] [drm:connected_sink_compute_bpp] clamping display bpp (was 36) to default limit of 24
>[    4.289635] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18)
>[    4.289637] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1
>[    4.289638] [drm:intel_modeset_pipe_config] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[    4.289639] [drm:intel_dump_pipe_config] [CRTC:26:pipe A][modeset] config ffff91c10df0b800 for pipe A
>[    4.289640] [drm:intel_dump_pipe_config] cpu_transcoder: A
>[    4.289641] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
>[    4.289642] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2660237, gmch_n: 4194304, link_m: 147790, link_n: 524288, tu: 64
>[    4.289644] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.289645] [drm:intel_dump_pipe_config] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
>[    4.289647] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    4.289647] [drm:intel_dump_pipe_config] requested mode:
>[    4.289650] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 76110 1366 1397 1462 1560 768 772 784 814 0x8 0xa
>[    4.289651] [drm:intel_dump_pipe_config] adjusted mode:
>[    4.289653] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 76110 1366 1397 1462 1560 768 772 784 814 0x8 0xa
>[    4.289655] [drm:intel_dump_crtc_timings] crtc timings: 76110 1366 1397 1462 1560 768 772 784 814, type: 0x8 flags: 0xa
>[    4.289655] [drm:intel_dump_pipe_config] port clock: 76110
>[    4.289656] [drm:intel_dump_pipe_config] pipe src size: 1366x768
>[    4.289657] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
>[    4.289659] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.289660] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    4.289660] [drm:intel_dump_pipe_config] ips: 0
>[    4.289661] [drm:intel_dump_pipe_config] double wide: 0
>[    4.289663] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x89046004, dpll_md: 0x0, fp0: 0x21009, fp1: 0x30d07
>[    4.289663] [drm:intel_dump_pipe_config] planes on this crtc
>[    4.289667] [drm:intel_dump_pipe_config] [PLANE:23:primary A] enabled
>[    4.289669] [drm:intel_dump_pipe_config] 	FB:50, fb = 1920x1080 format = XR24 little-endian (0x34325258)
>[    4.289669] [drm:intel_dump_pipe_config] 	scaler:0 src 0x0+1920+1080 dst 0x0+1920+1080
>[    4.289671] [drm:intel_dump_pipe_config] [PLANE:25:cursor A] disabled, scaler_id = 0
>[    4.289672] [drm:intel_dump_pipe_config] [PLANE:27:sprite A] disabled, scaler_id = 0
>[    4.289678] [drm:ironlake_crtc_compute_clock] using SSC reference clock of 120000 kHz
>[    4.289693] [drm:intel_find_shared_dpll] [CRTC:26:pipe A] allocated PCH DPLL A
>[    4.289694] [drm:intel_reference_shared_dpll] using PCH DPLL A for pipe A
>[    4.289713] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    4.289721] [drm:intel_disable_pipe] disabling pipe A
>[    4.330702] ata1.00: ATA-8: TOSHIBA MK5059GSXP, GT001H, max UDMA/100
>[    4.330706] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    4.331800] ata1.00: configured for UDMA/100
>[    4.375789] usb 4-1: new high-speed USB device number 2 using ehci-pci
>[    4.524631] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
>[    4.524633] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    4.524912] hub 4-1:1.0: USB hub found
>[    4.524994] hub 4-1:1.0: 8 ports detected
>[    4.547980] clocksource: Switched to clocksource tsc
>[    4.578518] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 26
>[    4.578524] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
>[    4.578733] [drm:verify_encoder_state] [ENCODER:33:LVDS]
>[    4.578735] [drm:verify_encoder_state] [ENCODER:37:CRT]
>[    4.578738] [drm:verify_encoder_state] [ENCODER:38:HDMI B]
>[    4.578741] [drm:verify_encoder_state] [ENCODER:43:DP B]
>[    4.578743] [drm:verify_encoder_state] [ENCODER:45:HDMI C]
>[    4.578746] [drm:verify_encoder_state] [ENCODER:47:DP C]
>[    4.578748] [drm:intel_connector_verify_state] [CONNECTOR:36:VGA-1]
>[    4.578750] [drm:intel_connector_verify_state] [CONNECTOR:39:HDMI-A-1]
>[    4.578753] [drm:intel_connector_verify_state] [CONNECTOR:44:DP-1]
>[    4.578754] [drm:intel_connector_verify_state] [CONNECTOR:46:HDMI-A-2]
>[    4.578756] [drm:intel_connector_verify_state] [CONNECTOR:48:DP-2]
>[    4.578758] [drm:verify_single_dpll_state] PCH DPLL A
>[    4.578763] [drm:verify_single_dpll_state] PCH DPLL B
>[    4.578771] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A
>[    4.579315] [drm:intel_enable_pipe] enabling pipe A
>[    4.580121] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x700
>[    4.580123] [drm:gen6_fdi_link_train] FDI train 1 done.
>[    4.580772] [drm:gen6_fdi_link_train] FDI_RX_IIR 0x600
>[    4.580773] [drm:gen6_fdi_link_train] FDI train 2 done.
>[    4.580774] [drm:gen6_fdi_link_train] FDI train done.
>[    4.580777] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 1, on? 0) for crtc 26
>[    4.580778] [drm:intel_enable_shared_dpll] enabling PCH DPLL A
>[    4.804017] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on RC6p off RC6pp off
>[    4.804022] [drm:sandybridge_pcode_write] warning: pcode (write) mailbox access failed: -75
>[    4.804022] [drm:gen6_enable_rps] Failed to set the min frequency
>[    4.811792] usb 4-1.2: new full-speed USB device number 3 using ehci-pci
>[    4.924309] usb 4-1.2: New USB device found, idVendor=24ae, idProduct=6000
>[    4.924310] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    4.924311] usb 4-1.2: Product: Rapoo Wireless Audio
>[    4.924312] usb 4-1.2: Manufacturer: Rapoo
>[    4.929854] hidraw: raw HID events driver (C) Jiri Kosina
>[    4.932807] usbcore: registered new interface driver usbhid
>[    4.932808] usbhid: USB HID core driver
>[    4.934894] input: Rapoo Rapoo Wireless Audio as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.3/0003:24AE:6000.0001/input/input7
>[    4.992064] hid-generic 0003:24AE:6000.0001: input,hidraw0: USB HID v1.00 Device [Rapoo Rapoo Wireless Audio] on usb-0000:00:1d.0-1.2/input3
>[    5.003828] usb 4-1.3: new full-speed USB device number 4 using ehci-pci
>[    5.115903] usb 4-1.3: New USB device found, idVendor=24ae, idProduct=2001
>[    5.115905] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    5.115906] usb 4-1.3: Product: RAPOO 5G Wireless Device
>[    5.115906] usb 4-1.3: Manufacturer: RAPOO
>[    5.117992] input: RAPOO RAPOO 5G Wireless Device as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.0/0003:24AE:2001.0002/input/input8
>[    5.176070] hid-generic 0003:24AE:2001.0002: input,hidraw1: USB HID v1.01 Keyboard [RAPOO RAPOO 5G Wireless Device] on usb-0000:00:1d.0-1.3/input0
>[    5.179333] input: RAPOO RAPOO 5G Wireless Device as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.3/4-1.3:1.1/0003:24AE:2001.0003/input/input9
>[    5.213230] [drm:intel_panel_enable_backlight] pipe A
>[    5.213240] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4648
>[    5.233830] [drm:intel_connector_verify_state] [CONNECTOR:32:LVDS-1]
>[    5.233845] [drm:verify_crtc_state] [CRTC:26:pipe A]
>[    5.233873] [drm:verify_single_dpll_state] PCH DPLL A
>[    5.233887] [drm:drm_fb_helper_hotplug_event] 
>[    5.233888] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1]
>[    5.233889] [drm:intel_lvds_detect] [CONNECTOR:32:LVDS-1]
>[    5.233894] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] probed modes :
>[    5.233897] [drm:drm_mode_debug_printmodeline] Modeline 51:"1366x768" 60 76110 1366 1397 1462 1560 768 772 784 814 0x8 0xa
>[    5.233898] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1]
>[    5.233899] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=1
>[    5.233902] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[    5.233902] [drm:intel_crt_detect] CRT not detected via hotplug
>[    5.234248] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    5.234251] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[    5.234484] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[    5.234492] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    5.234494] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    5.234497] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[    5.235227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[    5.235227] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[    5.235228] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[    5.235229] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] disconnected
>[    5.235231] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1]
>[    5.235232] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1]
>[    5.236141] hid-generic 0003:24AE:2001.0003: input,hiddev0,hidraw2: USB HID v1.01 Mouse [RAPOO RAPOO 5G Wireless Device] on usb-0000:00:1d.0-1.3/input1
>[    5.391824] [drm:intel_hdmi_detect] HDMI live status down
>[    5.392181] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    5.392184] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    5.392416] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    5.392424] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    5.392646] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    5.392649] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    5.392876] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    5.392885] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] disconnected
>[    5.392891] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1]
>[    5.392894] [drm:intel_dp_detect] [CONNECTOR:44:DP-1]
>[    5.392902] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] disconnected
>[    5.392905] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2]
>[    5.392907] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2]
>[    5.551821] [drm:intel_hdmi_detect] HDMI live status down
>[    5.552202] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    5.552205] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    5.552438] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    5.552447] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    5.552688] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    5.552691] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    5.552862] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    5.552871] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected
>[    5.552877] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2]
>[    5.552880] [drm:intel_dp_detect] [CONNECTOR:48:DP-2]
>[    5.552887] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] disconnected
>[    5.552896] [drm:drm_setup_crtcs] 
>[    5.552901] [drm:drm_enable_connectors] connector 32 enabled? yes
>[    5.552904] [drm:drm_enable_connectors] connector 36 enabled? no
>[    5.552906] [drm:drm_enable_connectors] connector 39 enabled? no
>[    5.552908] [drm:drm_enable_connectors] connector 44 enabled? no
>[    5.552910] [drm:drm_enable_connectors] connector 46 enabled? no
>[    5.552912] [drm:drm_enable_connectors] connector 48 enabled? no
>[    5.552918] [drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1
>[    5.552921] [drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1 0
>[    5.552925] [drm:intel_fb_initial_config] connector LVDS-1 on [CRTC:26:pipe A]: 1366x768
>[    5.552928] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
>[    5.552930] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
>[    5.552932] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
>[    5.552934] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
>[    5.552935] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
>[    5.552940] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 26 (0,0)
>[    5.567946] Console: switching to colour frame buffer device 240x67
>[    5.589045] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    5.604188] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK5059GS 1H   PQ: 0 ANSI: 5
>[    5.951628] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    5.954166] ata5.00: ATAPI: MATSHITADVD-RAM UJ8A2AS, 1.20, max UDMA/100
>[    5.957063] ata5.00: configured for UDMA/100
>[    5.961876] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8A2AS  1.20 PQ: 0 ANSI: 5
>[    5.986462] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    5.986557] sd 0:0:0:0: [sda] Write Protect is off
>[    5.986590] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    5.986611] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    6.003539] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    6.003633] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    6.003839] sr 4:0:0:0: Attached scsi CD-ROM sr0
>[    6.080847]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>[    6.081353] sd 0:0:0:0: [sda] Attached SCSI disk
>[    7.320133] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
>[    8.507661] random: crng init done
>[    8.602720] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
>[    9.260609] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
>[    9.262123] systemd[1]: Detected architecture x86-64.
>[    9.333275] systemd[1]: Set hostname to <alexeys-VPCSE1E1E>.
>[   12.507694] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[   12.510937] systemd[1]: Created slice User and Session Slice.
>[   12.514128] systemd[1]: Listening on Journal Audit Socket.
>[   12.517282] systemd[1]: Reached target Remote File Systems (Pre).
>[   12.520412] systemd[1]: Listening on fsck to fsckd communication Socket.
>[   12.523534] systemd[1]: Reached target Remote File Systems.
>[   12.526732] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[   14.286105] lp: driver loaded but no devices found
>[   14.359894] ppdev: user-space parallel port driver
>[   14.475951] systemd[1]: Started Journal Service.
>[   16.071718] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,user_xattr
>[   16.209491] systemd-journald[804]: Received request to flush runtime journal from PID 1
>[   16.966371] ACPI: AC Adapter [ADP1] (on-line)
>[   17.670137] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160422/utaddress-255)
>[   17.670142] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   17.670145] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
>[   17.670148] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160422/utaddress-255)
>[   17.670150] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   17.670151] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
>[   17.670153] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160422/utaddress-255)
>[   17.670155] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   17.670156] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160422/utaddress-255)
>[   17.670158] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20160422/utaddress-255)
>[   17.670160] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   17.670160] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[   17.750173] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[   17.903940] ACPI: Battery Slot [BAT1] (battery present)
>[   17.903997] ACPI: Battery Slot [BAT2] (battery absent)
>[   18.207985] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[   18.208030] sr 4:0:0:0: Attached scsi generic sg1 type 5
>[   18.534442] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
>[   18.534444] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
>[   18.534444] RAPL PMU: hw unit of domain package 2^-16 Joules
>[   18.534445] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
>[   19.263419] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input10
>[   19.263490] input: Sony Vaio Jogdial as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/SNY5001:00/input/input11
>[   19.269064] sony_laptop: handle 0x014b: keyboard backlight setup already done for 0x0143
>[   19.269065] sony_laptop: couldn't set up keyboard backlight function (-16)
>[   19.270083] sony_laptop: SNC setup done.
>[   19.638472] audit: type=1305 audit(1473193178.362:2): audit_pid=1465 old=0 auid=4294967295 ses=4294967295 res=1
>[   19.826010] [drm:asle_set_backlight] bclp = 0x80000072
>[   19.826013] [drm:asle_set_backlight] updating opregion backlight 114/255
>[   19.826016] [drm:intel_panel_actually_set_backlight] set backlight PWM = 2078
>[   19.826259] [drm:asle_set_backlight] bclp = 0x8000005d
>[   19.826260] [drm:asle_set_backlight] updating opregion backlight 93/255
>[   19.826262] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1695
>[   20.099182] Intel(R) Wireless WiFi driver for Linux
>[   20.099183] Copyright(c) 2003- 2015 Intel Corporation
>[   20.099363] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
>[   20.414525] AVX version of gcm_enc/dec engaged.
>[   20.414527] AES CTR mode by8 optimization enabled
>[   20.557099] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
>[   21.434176] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
>[   21.434178] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
>[   21.434179] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
>[   21.434180] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
>[   21.435526] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
>[   22.241514] intel_rapl: Found RAPL domain package
>[   22.241517] intel_rapl: Found RAPL domain core
>[   22.241518] intel_rapl: Found RAPL domain uncore
>[   22.241522] intel_rapl: RAPL package 0 domain package locked by BIOS
>[   22.355406] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
>[   22.724368] snd_hda_codec_realtek hdaudioC0D0: ALC275: SKU not ready 0x411111f0
>[   22.724583] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC275: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[   22.724585] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   22.724586] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
>[   22.724587] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[   22.724588] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[   22.724589] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
>[   22.910757] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[   22.955838] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>[   22.956675] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
>[   22.956760] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
>[   22.956836] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
>[   23.195521] [drm:radeon_atif_handler] event, device_class = battery, type = 0x81
>[   23.195564] [drm:radeon_atif_handler] event, device_class = battery, type = 0x80
>[   23.195600] [drm:radeon_atif_handler] event, device_class = battery, type = 0x81
>[   23.195613] [drm:radeon_atif_handler] event, device_class = battery, type = 0x80
>[   23.312989] Bluetooth: Core ver 2.21
>[   23.313005] NET: Registered protocol family 31
>[   23.313006] Bluetooth: HCI device and connection manager initialized
>[   23.313009] Bluetooth: HCI socket layer initialized
>[   23.313011] Bluetooth: L2CAP socket layer initialized
>[   23.313015] Bluetooth: SCO socket layer initialized
>[   23.475696] Adding 4106236k swap on /dev/sda6.  Priority:-1 extents:1 across:4106236k FS
>[   23.596756] usbcore: registered new interface driver btusb
>[   23.974653] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   23.979044] usbcore: registered new interface driver snd-usb-audio
>[   25.569786] media: Linux media interface: v0.10
>[   25.673686] Linux video capture interface: v2.00
>[   26.035662] uvcvideo: Found UVC 1.00 device USB2.0 Camera (05ca:18c0)
>[   26.037060] uvcvideo 2-1.3:1.0: Entity type for entity Extension 3 was not initialized!
>[   26.037062] uvcvideo 2-1.3:1.0: Entity type for entity Processing 2 was not initialized!
>[   26.037063] uvcvideo 2-1.3:1.0: Entity type for entity Camera 1 was not initialized!
>[   26.037153] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input16
>[   26.037224] usbcore: registered new interface driver uvcvideo
>[   26.037225] USB Video Class driver (1.1.1)
>[   32.018853] [drm:i915_gem_open] 
>[   32.326613] [drm:evergreen_pcie_gen2_enable] PCIE gen 2 link speeds already enabled
>[   32.330689] [drm:evergreen_pcie_gart_enable] PCIE GART of 1024M enabled (table at 0x0000000000162000).
>[   32.330781] radeon 0000:01:00.0: WB enabled
>[   32.330783] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff91c10e398c00
>[   32.330784] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff91c10e398c0c
>[   32.331551] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc3ae41032118
>[   32.331813] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   32.331814] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   32.331815] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   32.331816] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   32.331816] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   32.331817] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   32.347890] [drm:r600_ring_test] ring test on 0 succeeded in 2 usecs
>[   32.347901] [drm:r600_dma_ring_test] ring test on 3 succeeded in 7 usecs
>[   32.523793] [drm:uvd_v1_0_ring_test] ring test on 5 succeeded in 2 usecs
>[   32.523802] [drm:uvd_v1_0_init] UVD initialized successfully.
>[   32.523895] [drm:r600_ib_test] ib test on ring 0 succeeded in 0 usecs
>[   32.523974] [drm:r600_dma_ib_test] ib test on ring 3 succeeded in 0 usecs
>[   33.187454] [drm:uvd_v1_0_ib_test] ib test on ring 5 succeeded
>[   33.199649] [drm:i915_gem_open] 
>[   33.215417] [drm:i915_gem_open] 
>[   33.231976] [drm:i915_gem_open] 
>[   33.231994] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1]
>[   33.231996] [drm:intel_lvds_detect] [CONNECTOR:32:LVDS-1]
>[   33.231999] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] probed modes :
>[   33.232001] [drm:drm_mode_debug_printmodeline] Modeline 51:"1366x768" 60 76110 1366 1397 1462 1560 768 772 784 814 0x8 0xa
>[   33.232010] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1]
>[   33.232011] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=1
>[   33.232014] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[   33.232015] [drm:intel_crt_detect] CRT not detected via hotplug
>[   33.232445] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   33.232446] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[   33.232662] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   33.232672] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   33.232675] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   33.232679] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   33.233411] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   33.233412] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   33.233413] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   33.233414] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] disconnected
>[   33.233421] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1]
>[   33.233422] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1]
>[   33.391288] [drm:intel_hdmi_detect] HDMI live status down
>[   33.391596] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   33.391598] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   33.391775] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   33.391778] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   33.391952] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   33.391953] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   33.392109] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   33.392113] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] disconnected
>[   33.392128] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1]
>[   33.392130] [drm:intel_dp_detect] [CONNECTOR:44:DP-1]
>[   33.392135] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] disconnected
>[   33.392139] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2]
>[   33.392141] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2]
>[   33.551482] [drm:intel_hdmi_detect] HDMI live status down
>[   33.551795] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   33.551795] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   33.551964] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   33.551972] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   33.552143] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   33.552145] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   33.552312] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   33.552320] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected
>[   33.552353] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2]
>[   33.552356] [drm:intel_dp_detect] [CONNECTOR:48:DP-2]
>[   33.552363] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] disconnected
>[   35.740881] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   35.740882] Bluetooth: BNEP filters: protocol multicast
>[   35.740886] Bluetooth: BNEP socket layer initialized
>[   46.138451] [drm:evergreen_pcie_gen2_enable] PCIE gen 2 link speeds already enabled
>[   46.142525] [drm:evergreen_pcie_gart_enable] PCIE GART of 1024M enabled (table at 0x0000000000162000).
>[   46.142617] radeon 0000:01:00.0: WB enabled
>[   46.142619] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff91c10e398c00
>[   46.142620] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff91c10e398c0c
>[   46.143390] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc3ae41032118
>[   46.143681] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   46.143683] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   46.143684] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   46.143685] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   46.143686] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   46.143687] [drm:radeon_crtc_handle_flip] radeon_crtc->flip_status = 0 != RADEON_FLIP_SUBMITTED(2)
>[   46.159661] [drm:r600_ring_test] ring test on 0 succeeded in 2 usecs
>[   46.159674] [drm:r600_dma_ring_test] ring test on 3 succeeded in 7 usecs
>[   46.335627] [drm:uvd_v1_0_ring_test] ring test on 5 succeeded in 2 usecs
>[   46.335636] [drm:uvd_v1_0_init] UVD initialized successfully.
>[   46.335721] [drm:r600_ib_test] ib test on ring 0 succeeded in 0 usecs
>[   46.335799] [drm:r600_dma_ib_test] ib test on ring 3 succeeded in 0 usecs
>[   47.011274] [drm:uvd_v1_0_ib_test] ib test on ring 5 succeeded
>[   47.023613] [drm:i915_gem_open] 
>[   47.841135] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   47.843213] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
>[   47.849799] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
>[   47.849891] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
>[   48.053462] [drm:i915_gem_open] 
>[   48.133440] [drm:i915_gem_open] 
>[   48.134713] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
>[   48.141338] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
>[   48.141433] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
>[   48.154407] [drm:drm_mode_addfb2] [FB:53]
>[   48.154681] [drm:drm_internal_framebuffer_create] could not create framebuffer
>[   48.154686] [drm:drm_internal_framebuffer_create] could not create framebuffer
>[   48.154694] [drm:drm_mode_addfb2] [FB:53]
>[   48.171882] [drm:i915_gem_open] 
>[   48.171911] [drm:i915_gem_open] 
>[   48.226526] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   48.230253] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   48.607179] r8169 0000:05:00.0 eth0: link down
>[   48.607252] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   48.983948] [drm:drm_mode_addfb2] [FB:53]
>[   49.306521] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   50.626231] [drm:drm_mode_setcrtc] [CRTC:26:pipe A]
>[   50.626236] [drm:drm_mode_setcrtc] [CONNECTOR:32:LVDS-1]
>[   50.639113] [drm:drm_mode_setcrtc] [CRTC:34:crtc-0]
>[   50.639116] [drm:drm_crtc_helper_set_config] 
>[   50.639117] [drm:drm_crtc_helper_set_config] [CRTC:34:crtc-0] [NOFB]
>[   50.639352] [drm:drm_mode_setcrtc] [CRTC:36:crtc-1]
>[   50.639353] [drm:drm_crtc_helper_set_config] 
>[   50.639354] [drm:drm_crtc_helper_set_config] [CRTC:36:crtc-1] [NOFB]
>[   50.639462] [drm:drm_mode_setcrtc] [CRTC:38:crtc-2]
>[   50.639462] [drm:drm_crtc_helper_set_config] 
>[   50.639463] [drm:drm_crtc_helper_set_config] [CRTC:38:crtc-2] [NOFB]
>[   50.639565] [drm:drm_mode_setcrtc] [CRTC:40:crtc-3]
>[   50.639566] [drm:drm_crtc_helper_set_config] 
>[   50.639566] [drm:drm_crtc_helper_set_config] [CRTC:40:crtc-3] [NOFB]
>[   50.639668] [drm:drm_mode_setcrtc] [CRTC:42:crtc-4]
>[   50.639669] [drm:drm_crtc_helper_set_config] 
>[   50.639670] [drm:drm_crtc_helper_set_config] [CRTC:42:crtc-4] [NOFB]
>[   50.639771] [drm:drm_mode_setcrtc] [CRTC:44:crtc-5]
>[   50.639772] [drm:drm_crtc_helper_set_config] 
>[   50.639773] [drm:drm_crtc_helper_set_config] [CRTC:44:crtc-5] [NOFB]
>[   50.639897] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1]
>[   50.639899] [drm:intel_lvds_detect] [CONNECTOR:32:LVDS-1]
>[   50.639903] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] probed modes :
>[   50.639906] [drm:drm_mode_debug_printmodeline] Modeline 51:"1366x768" 60 76110 1366 1397 1462 1560 768 772 784 814 0x8 0xa
>[   50.640030] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1]
>[   50.640031] [drm:intel_dp_detect] [CONNECTOR:44:DP-1]
>[   50.640036] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] disconnected
>[   50.640040] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2]
>[   50.640041] [drm:intel_dp_detect] [CONNECTOR:48:DP-2]
>[   50.640043] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] disconnected
>[   50.640046] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1]
>[   50.640047] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1]
>[   50.799116] [drm:intel_hdmi_detect] HDMI live status down
>[   50.799476] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   50.799480] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   50.799715] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   50.799725] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   50.799949] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   50.799953] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   50.800181] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   50.800192] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] disconnected
>[   50.800230] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2]
>[   50.800233] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2]
>[   50.959059] [drm:intel_hdmi_detect] HDMI live status down
>[   50.959491] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   50.959492] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   50.959710] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   50.959721] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   50.959942] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   50.959946] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   50.960271] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   50.960274] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected
>[   50.960292] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1]
>[   50.960293] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=1
>[   50.960296] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[   50.960297] [drm:intel_crt_detect] CRT not detected via hotplug
>[   50.960518] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   50.960520] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[   50.960727] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   50.960731] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   50.960734] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   50.960737] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   50.961471] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   50.961472] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   50.961473] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   50.961474] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] disconnected
>[   51.161511] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   51.318915] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   51.604452] Ebtables v2.0 registered
>[   52.412246] wlan0: authenticate with 94:0c:6d:ee:6f:08
>[   52.415352] wlan0: send auth to 94:0c:6d:ee:6f:08 (try 1/3)
>[   52.417986] wlan0: authenticated
>[   52.418139] wlan0: waiting for beacon from 94:0c:6d:ee:6f:08
>[   52.427022] wlan0: associate with 94:0c:6d:ee:6f:08 (try 1/3)
>[   52.430864] wlan0: RX AssocResp from 94:0c:6d:ee:6f:08 (capab=0x431 status=0 aid=1)
>[   52.453096] wlan0: associated
>[   52.453130] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[   52.749095] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
>[   52.896521] tun: Universal TUN/TAP device driver, 1.6
>[   52.896523] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[   52.955035] virbr0: port 1(virbr0-nic) entered blocking state
>[   52.955036] virbr0: port 1(virbr0-nic) entered disabled state
>[   52.955118] device virbr0-nic entered promiscuous mode
>[   54.674993] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
>[   55.569940] Guest personality initialized and is inactive
>[   55.569999] VMCI host device registered (name=vmci, major=10, minor=57)
>[   55.570000] Initialized host personality
>[   55.658084] NET: Registered protocol family 40
>[   55.716553] fuse init (API version 7.25)
>[   57.666408] virbr0: port 1(virbr0-nic) entered blocking state
>[   57.666410] virbr0: port 1(virbr0-nic) entered listening state
>[   59.682855] virbr0: port 1(virbr0-nic) entered learning state
>[   60.284635] virbr0: port 1(virbr0-nic) entered disabled state
>[   65.080535] [drm:i915_gem_open] 
>[   69.184466] device virbr0-nic left promiscuous mode
>[   69.184496] virbr0: port 1(virbr0-nic) entered disabled state
>[   79.640031] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   79.640274] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   79.647033] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   79.647276] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   79.679979] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   79.680292] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   79.702344] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   79.702777] usb 4-1.2: current rate 0 is different from the runtime rate 48000
>[   80.258647] Bluetooth: RFCOMM TTY layer initialized
>[   80.258653] Bluetooth: RFCOMM socket layer initialized
>[   80.258658] Bluetooth: RFCOMM ver 1.11
>[   80.917763] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1]
>[   80.917766] [drm:intel_lvds_detect] [CONNECTOR:32:LVDS-1]
>[   80.917771] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:LVDS-1] probed modes :
>[   80.917774] [drm:drm_mode_debug_printmodeline] Modeline 51:"1366x768" 60 76110 1366 1397 1462 1560 768 772 784 814 0x8 0xa
>[   80.917892] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1]
>[   80.917893] [drm:intel_dp_detect] [CONNECTOR:44:DP-1]
>[   80.917899] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:44:DP-1] disconnected
>[   80.917902] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2]
>[   80.917902] [drm:intel_dp_detect] [CONNECTOR:48:DP-2]
>[   80.917905] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:DP-2] disconnected
>[   80.917907] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1]
>[   80.917908] [drm:intel_hdmi_detect] [CONNECTOR:39:HDMI-A-1]
>[   81.076853] [drm:intel_hdmi_detect] HDMI live status down
>[   81.077219] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   81.077223] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   81.077458] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   81.077468] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   81.077692] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   81.077696] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   81.077921] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   81.077931] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:39:HDMI-A-1] disconnected
>[   81.077982] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2]
>[   81.077986] [drm:intel_hdmi_detect] [CONNECTOR:46:HDMI-A-2]
>[   81.236796] [drm:intel_hdmi_detect] HDMI live status down
>[   81.237156] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   81.237160] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   81.237387] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   81.237397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   81.237628] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   81.237632] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   81.237856] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   81.237866] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:46:HDMI-A-2] disconnected
>[   81.237921] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1]
>[   81.237925] [drm:intel_crt_detect] [CONNECTOR:36:VGA-1] force=1
>[   81.237932] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
>[   81.237935] [drm:intel_crt_detect] CRT not detected via hotplug
>[   81.238159] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   81.238164] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK on first message, retry
>[   81.238402] [drm:do_gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
>[   81.238404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   81.238405] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   81.238406] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
>[   81.239073] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
>[   81.239074] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
>[   81.239075] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
>[   81.239076] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:VGA-1] disconnected

Actions: View

Attachments on bug 97060: 125278 | 125279 | 126227 | 126228 | 126251 | 126254 | 126255 | 126312 | 126373 | 126415

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.