Attachment 128494 Details for Bug 94698 – Dmesg

Dmesg

s4_dmesg.log (text/plain), 157.83 KB, created by Elio on 2016-12-15 19:35:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Elio

Created: 2016-12-15 19:35:57 UTC

Size: 157.83 KB

patch

obsolete

>[    0.000000] Linux version 4.9.0-rc8latestfirmware+ (gfx@gfx-desktop) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #1 SMP Wed Dec 7 14:23:08 EST 2016
>[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-rc8latestfirmware+ root=UUID=5797af19-51f1-4ff9-a9ff-f7654c365c2d ro quiet drm.debug=0xe i915.enable_guc_loading=2 i915.enable_guc_submission=0 resume=/dev/sda3 fastboot
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000]   AMD AuthenticAMD
>[    0.000000]   Centaur CentaurHauls
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
>[    0.000000] x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
>[    0.000000] x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
>[    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
>[    0.000000] x86/fpu: Using 'eager' FPU context switches.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000effffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000f000000-0x0000000012151fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000012152000-0x0000000077f05fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000077f06000-0x0000000078145fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000078146000-0x0000000078235fff] type 20
>[    0.000000] BIOS-e820: [mem 0x0000000078236000-0x0000000079cb5fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000079cb6000-0x0000000079d15fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x0000000079d16000-0x0000000079d55fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x0000000079d56000-0x000000007ac26fff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007ac27000-0x000000007ac27fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007ac28000-0x000000007ac51fff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000007ac52000-0x000000007affffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] efi: EFI v2.50 by EDK II
>[    0.000000] efi:  ACPI=0x79d55000  ACPI 2.0=0x79d55014  ESRT=0x79c81000  SMBIOS=0x78067000  SMBIOS 3.0=0x78065000  PROP=0x79f89920 
>[    0.000000] SMBIOS 3.0.0 present.
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x480000 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-back
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
>[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
>[    0.000000]   2 base 007B000000 mask 7FFF000000 uncachable
>[    0.000000]   3 base 0100000000 mask 7F00000000 write-back
>[    0.000000]   4 base 0200000000 mask 7F00000000 write-back
>[    0.000000]   5 base 0300000000 mask 7F00000000 write-back
>[    0.000000]   6 base 0400000000 mask 7F80000000 write-back
>[    0.000000]   7 base 00FF800000 mask 70FF800000 write-combining
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
>[    0.000000] e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
>[    0.000000] efi: requested map not found.
>[    0.000000] esrt: ESRT header is not in the memory map.
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff9cef80097000] 97000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0x1af233000, 0x1af233fff] PGTABLE
>[    0.000000] BRK [0x1af234000, 0x1af234fff] PGTABLE
>[    0.000000] BRK [0x1af235000, 0x1af235fff] PGTABLE
>[    0.000000] BRK [0x1af236000, 0x1af236fff] PGTABLE
>[    0.000000] BRK [0x1af237000, 0x1af237fff] PGTABLE
>[    0.000000] BRK [0x1af238000, 0x1af238fff] PGTABLE
>[    0.000000] BRK [0x1af239000, 0x1af239fff] PGTABLE
>[    0.000000] BRK [0x1af23a000, 0x1af23afff] PGTABLE
>[    0.000000] BRK [0x1af23b000, 0x1af23bfff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x33a7e000-0x35d36fff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x0000000079D55014 000024 (v02 INTEL )
>[    0.000000] ACPI: XSDT 0x0000000079D2C188 0000E4 (v01 INTEL  EDK2     00000003 BRXT 01000013)
>[    0.000000] ACPI: FACP 0x0000000079D4D000 00010C (v05 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20160831/tbfadt-603)
>[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20160831/tbfadt-708)
>[    0.000000] ACPI: DSDT 0x0000000079D3D000 00958C (v02 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: FACS 0x0000000079D04000 000040
>[    0.000000] ACPI: SSDT 0x0000000079D53000 0003C6 (v02 INTEL  Tpm2Tabl 00001000 INTL 20150818)
>[    0.000000] ACPI: TPM2 0x0000000079D52000 000034 (v03                 00000000      00000000)
>[    0.000000] ACPI: UEFI 0x0000000079D0C000 000042 (v01 INTEL  EDK2     00000002 BRXT 01000013)
>[    0.000000] ACPI: BDAT 0x0000000079D51000 000030 (v02                 00000000      00000000)
>[    0.000000] ACPI: DBG2 0x0000000079D50000 000072 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: DBGP 0x0000000079D4F000 000034 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: HPET 0x0000000079D4C000 000038 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: LPIT 0x0000000079D4B000 00005C (v01 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: APIC 0x0000000079D4A000 000084 (v03 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: MCFG 0x0000000079D49000 00003C (v01 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: NPKT 0x0000000079D48000 000065 (v01 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: WSMT 0x0000000079D47000 000028 (v00 INTEL  EDK2     00000003 BRXT 0100000D)
>[    0.000000] ACPI: SSDT 0x0000000079D33000 0046C3 (v02 INTEL  RVPRtd3  00000003 BRXT 0100000D)
>[    0.000000] ACPI: SSDT 0x0000000079D32000 000B53 (v02 INTEL  UsbCTabl 00000003 BRXT 0100000D)
>[    0.000000] ACPI: SSDT 0x0000000079D30000 0016BE (v01 Intel_ Platform 00001000 INTL 20150818)
>[    0.000000] ACPI: SSDT 0x0000000079D2F000 000400 (v02 PmRef  Cpu0Ist  00003000 INTL 20150818)
>[    0.000000] ACPI: SSDT 0x0000000079D2E000 00072B (v02 CpuRef CpuSsdt  00003000 INTL 20150818)
>[    0.000000] ACPI: SSDT 0x0000000079D2D000 000356 (v02 PmRef  Cpu0Tst  00003000 INTL 20150818)
>[    0.000000] ACPI: SSDT 0x0000000079D54000 00017C (v02 PmRef  ApTst    00003000 INTL 20150818)
>[    0.000000] ACPI: SSDT 0x0000000079D29000 00277A (v02 SaSsdt SaSsdt   00003000 INTL 20150818)
>[    0.000000] ACPI: FPDT 0x0000000079D28000 000044 (v01 INTEL  EDK2     00000002 BRXT 01000013)
>[    0.000000] ACPI: WDAT 0x0000000079D4E000 000104 (v01                 00000000      00000000)
>[    0.000000] ACPI: NHLT 0x0000000079D3B000 001A50 (v00 INTEL  EDK2     00000002 BRXT 01000013)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000047fffffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x47fffb000-0x47fffffff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000047fffffff]
>[    0.000000]   Device   empty
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
>[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000effffff]
>[    0.000000]   node   0: [mem 0x0000000012152000-0x0000000077f05fff]
>[    0.000000]   node   0: [mem 0x0000000079d56000-0x000000007ac26fff]
>[    0.000000]   node   0: [mem 0x000000007ac52000-0x000000007affffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000047fffffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000047fffffff]
>[    0.000000] On node 0 totalpages: 4153296
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 1061 pages reserved
>[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 7489 pages used for memmap
>[    0.000000]   DMA32 zone: 479283 pages, LIFO batch:31
>[    0.000000]   Normal zone: 57344 pages used for memmap
>[    0.000000]   Normal zone: 3670016 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0f000000-0x12151fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x77f06000-0x78145fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x78146000-0x78235fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x78236000-0x79cb5fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x79cb6000-0x79d15fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x79d16000-0x79d55fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7ac27000-0x7ac27fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7ac28000-0x7ac51fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xffffffff]
>[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
>[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] percpu: Embedded 36 pages/cpu @ffff9cf3ffc00000 s107736 r8192 d31528 u524288
>[    0.000000] pcpu-alloc: s107736 r8192 d31528 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4087338
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-rc8latestfirmware+ root=UUID=5797af19-51f1-4ff9-a9ff-f7654c365c2d ro quiet drm.debug=0xe i915.enable_guc_loading=2 i915.enable_guc_submission=0 resume=/dev/sda3 fastboot
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 16169480K/16613184K available (8640K kernel code, 1436K rwdata, 3816K rodata, 1556K init, 1260K bss, 443704K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	Build-time adjustment of leaf fanout to 64.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
>[    0.000000] NR_IRQS:16640 nr_irqs:1024 16
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: PIT calibration matches HPET. 1 loops
>[    0.000000] tsc: Detected 1094.431 MHz processor
>[    0.000107] Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=4377600)
>[    0.000113] pid_max: default: 32768 minimum: 301
>[    0.000128] ACPI: Core revision 20160831
>[    0.028334] ACPI: 10 ACPI AML tables successfully acquired and loaded
>[    0.029290] Security Framework initialized
>[    0.029293] Yama: becoming mindful.
>[    0.029313] AppArmor: AppArmor initialized
>[    0.031566] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
>[    0.041228] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.045546] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.045583] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.046306] CPU: Physical Processor ID: 0
>[    0.046308] CPU: Processor Core ID: 0
>[    0.046335] mce: CPU supports 7 MCE banks
>[    0.046379] CPU0: Thermal monitoring enabled (TM1)
>[    0.046461] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
>[    0.046463] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
>[    0.051914] Freeing SMP alternatives memory: 32K (ffffffff820ee000 - ffffffff820f6000)
>[    0.071535] ftrace: allocating 33008 entries in 129 pages
>[    0.155226] smpboot: APIC(0) Converting physical 0 to logical package 0
>[    0.155230] smpboot: Max logical packages: 1
>[    0.156578] x2apic: IRQ remapping doesn't support X2APIC mode
>[    0.161607] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.201312] TSC deadline timer enabled
>[    0.201322] smpboot: CPU0: Intel 06/5c (family: 0x6, model: 0x5c, stepping: 0x9)
>[    0.201332] Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver.
>[    0.201367] ... version:                4
>[    0.201368] ... bit width:              48
>[    0.201370] ... generic registers:      4
>[    0.201371] ... value mask:             0000ffffffffffff
>[    0.201373] ... max period:             0000ffffffffffff
>[    0.201374] ... fixed-purpose events:   3
>[    0.201375] ... event mask:             000000070000000f
>[    0.203268] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.203593] x86: Booting SMP configuration:
>[    0.203596] .... node  #0, CPUs:      #1 #2 #3
>[    0.443893] x86: Booted up 1 node, 4 CPUs
>[    0.443897] smpboot: Total of 4 processors activated (8771.08 BogoMIPS)
>[    0.447810] devtmpfs: initialized
>[    0.447979] x86/mm: Memory block size: 128MB
>[    0.457994] evm: security.selinux
>[    0.457995] evm: security.SMACK64
>[    0.457997] evm: security.SMACK64EXEC
>[    0.457998] evm: security.SMACK64TRANSMUTE
>[    0.457999] evm: security.SMACK64MMAP
>[    0.458000] evm: security.ima
>[    0.458002] evm: security.capability
>[    0.458266] PM: Registering ACPI NVS region [mem 0x79cb6000-0x79d15fff] (393216 bytes)
>[    0.458281] PM: Registering ACPI NVS region [mem 0x7ac27000-0x7ac27fff] (4096 bytes)
>[    0.458410] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.458511] pinctrl core: initialized pinctrl subsystem
>[    0.458862] RTC time: 12:44:30, date: 11/09/16
>[    0.463233] NET: Registered protocol family 16
>[    0.479713] cpuidle: using governor ladder
>[    0.495737] cpuidle: using governor menu
>[    0.495740] PCCT header not found.
>[    0.495929] ACPI: bus type PCI registered
>[    0.495932] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.496094] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
>[    0.496098] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
>[    0.496117] PCI: Using configuration type 1 for base access
>[    0.512160] HugeTLB registered 1 GB page size, pre-allocated 0 pages
>[    0.512163] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.512811] ACPI: Added _OSI(Module Device)
>[    0.512813] ACPI: Added _OSI(Processor Device)
>[    0.512815] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.512817] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.514174] ACPI: Executed 6 blocks of module-level executable AML code
>[    0.530503] ACPI: Dynamic OEM Table Load:
>[    0.530533] ACPI: SSDT 0xFFFF9CF3ED1B5A00 000102 (v02 PmRef  Cpu0Cst  00003001 INTL 20150818)
>[    0.531407] ACPI: Dynamic OEM Table Load:
>[    0.531425] ACPI: SSDT 0xFFFF9CF3ED1B5C00 00015F (v02 PmRef  ApIst    00003000 INTL 20150818)
>[    0.531919] ACPI: Dynamic OEM Table Load:
>[    0.531935] ACPI: SSDT 0xFFFF9CF3ED1CDCC0 00008D (v02 PmRef  ApCst    00003000 INTL 20150818)
>[    0.534192] ACPI : EC: EC started
>[    0.901138] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as first EC
>[    0.901142] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x2b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.901145] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions
>[    0.901147] ACPI: Interpreter enabled
>[    0.901206] ACPI: (supports S0 S3 S4 S5)
>[    0.901208] ACPI: Using IOAPIC for interrupt routing
>[    0.901293] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.907468] ACPI: Power Resource [PXP] (off)
>[    0.908923] ACPI: Power Resource [PXP] (on)
>[    0.934334] ACPI: Power Resource [PXP] (on)
>[    0.958301] ACPI: Power Resource [PXP] (off)
>[    0.959575] ACPI: Power Resource [PXP] (off)
>[    0.960830] ACPI: Power Resource [PXP] (off)
>[    0.962433] ACPI: Power Resource [SPPR] (on)
>[    0.985928] ACPI: Power Resource [ODPR] (on)
>[    0.986304] ACPI: Power Resource [SPPR] (off)
>[    0.987051] ACPI: Power Resource [ODPR] (on)
>[    0.987785] ACPI: Power Resource [UPPR] (on)
>[    0.988392] ACPI: Power Resource [PX03] (on)
>[    0.989452] ACPI: Power Resource [UPPR] (on)
>[    0.990014] ACPI: Power Resource [UPPR] (on)
>[    0.990996] ACPI: Power Resource [UPPR] (on)
>[    0.991623] ACPI: Power Resource [UPPR] (on)
>[    0.992153] ACPI: Power Resource [UPPR] (on)
>[    0.992770] ACPI: Power Resource [USBC] (on)
>[    0.993068] ACPI: Power Resource [SDPR] (on)
>[    1.014494] ACPI: Power Resource [LSPR] (on)
>[    1.021318] ACPI: Power Resource [PAUD] (on)
>[    1.028836] ACPI: Power Resource [FN00] (on)
>[    1.204329] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    1.204341] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    1.206196] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    1.206228] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>[    1.207774] PCI host bridge to bus 0000:00
>[    1.207780] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
>[    1.207784] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
>[    1.207787] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
>[    1.207790] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    1.207793] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    1.207797] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
>[    1.207800] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
>[    1.207803] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
>[    1.207806] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
>[    1.207809] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
>[    1.207812] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
>[    1.207816] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    1.207836] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
>[    1.208490] pci 0000:00:02.0: [8086:5a84] type 00 class 0x030000
>[    1.208513] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
>[    1.208528] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
>[    1.208539] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
>[    1.209157] pci 0000:00:03.0: [8086:5a88] type 00 class 0x048000
>[    1.209184] pci 0000:00:03.0: reg 0x10: [mem 0x91000000-0x91ffffff 64bit]
>[    1.209795] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040300
>[    1.209830] pci 0000:00:0e.0: reg 0x10: [mem 0x92310000-0x92313fff 64bit]
>[    1.209886] pci 0000:00:0e.0: reg 0x20: [mem 0x92000000-0x920fffff 64bit]
>[    1.209995] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
>[    1.210565] pci 0000:00:0e.0: System wakeup disabled by ACPI
>[    1.210680] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
>[    1.210727] pci 0000:00:0f.0: reg 0x10: [mem 0x92318000-0x92318fff 64bit]
>[    1.210882] pci 0000:00:0f.0: PME# supported from D3hot
>[    1.211579] pci 0000:00:11.0: [8086:5aa2] type 00 class 0x005007
>[    1.211621] pci 0000:00:11.0: reg 0x10: [mem 0x92314000-0x92315fff 64bit]
>[    1.211646] pci 0000:00:11.0: reg 0x18: [mem 0x9231b000-0x9231bfff 64bit]
>[    1.212316] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
>[    1.212344] pci 0000:00:12.0: reg 0x10: [mem 0x92316000-0x92317fff]
>[    1.212359] pci 0000:00:12.0: reg 0x14: [mem 0x92342000-0x923420ff]
>[    1.212373] pci 0000:00:12.0: reg 0x18: [io  0x2080-0x2087]
>[    1.212386] pci 0000:00:12.0: reg 0x1c: [io  0x2088-0x208b]
>[    1.212399] pci 0000:00:12.0: reg 0x20: [io  0x2060-0x207f]
>[    1.212413] pci 0000:00:12.0: reg 0x24: [mem 0x92340000-0x923407ff]
>[    1.212492] pci 0000:00:12.0: PME# supported from D3hot
>[    1.213063] pci 0000:00:13.0: [8086:5ada] type 01 class 0x060400
>[    1.213186] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
>[    1.213777] pci 0000:00:13.0: System wakeup disabled by ACPI
>[    1.213928] pci 0000:00:14.0: [8086:5ad7] type 01 class 0x060400
>[    1.214109] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
>[    1.214702] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    1.214840] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
>[    1.214879] pci 0000:00:15.0: reg 0x10: [mem 0x92300000-0x9230ffff 64bit]
>[    1.215012] pci 0000:00:15.0: PME# supported from D3hot D3cold
>[    1.215484] pci 0000:00:15.0: System wakeup disabled by ACPI
>[    1.215614] pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000
>[    1.215652] pci 0000:00:16.0: reg 0x10: [mem 0x9231c000-0x9231cfff 64bit]
>[    1.215673] pci 0000:00:16.0: reg 0x18: [mem 0x9231d000-0x9231dfff 64bit]
>[    1.216289] pci 0000:00:16.1: [8086:5aae] type 00 class 0x118000
>[    1.216326] pci 0000:00:16.1: reg 0x10: [mem 0x9231e000-0x9231efff 64bit]
>[    1.216347] pci 0000:00:16.1: reg 0x18: [mem 0x9231f000-0x9231ffff 64bit]
>[    1.216950] pci 0000:00:16.2: [8086:5ab0] type 00 class 0x118000
>[    1.216993] pci 0000:00:16.2: reg 0x10: [mem 0x92320000-0x92320fff 64bit]
>[    1.217015] pci 0000:00:16.2: reg 0x18: [mem 0x92321000-0x92321fff 64bit]
>[    1.217620] pci 0000:00:16.3: [8086:5ab2] type 00 class 0x118000
>[    1.217664] pci 0000:00:16.3: reg 0x10: [mem 0x92322000-0x92322fff 64bit]
>[    1.217686] pci 0000:00:16.3: reg 0x18: [mem 0x92323000-0x92323fff 64bit]
>[    1.218305] pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000
>[    1.218349] pci 0000:00:17.0: reg 0x10: [mem 0x92324000-0x92324fff 64bit]
>[    1.218369] pci 0000:00:17.0: reg 0x18: [mem 0x92325000-0x92325fff 64bit]
>[    1.218975] pci 0000:00:17.1: [8086:5ab6] type 00 class 0x118000
>[    1.219013] pci 0000:00:17.1: reg 0x10: [mem 0x92326000-0x92326fff 64bit]
>[    1.219035] pci 0000:00:17.1: reg 0x18: [mem 0x92327000-0x92327fff 64bit]
>[    1.219655] pci 0000:00:17.2: [8086:5ab8] type 00 class 0x118000
>[    1.219698] pci 0000:00:17.2: reg 0x10: [mem 0x92328000-0x92328fff 64bit]
>[    1.219720] pci 0000:00:17.2: reg 0x18: [mem 0x92329000-0x92329fff 64bit]
>[    1.220329] pci 0000:00:17.3: [8086:5aba] type 00 class 0x118000
>[    1.220367] pci 0000:00:17.3: reg 0x10: [mem 0x9232a000-0x9232afff 64bit]
>[    1.220387] pci 0000:00:17.3: reg 0x18: [mem 0x9232b000-0x9232bfff 64bit]
>[    1.221009] pci 0000:00:18.0: [8086:5abc] type 00 class 0x118000
>[    1.221049] pci 0000:00:18.0: reg 0x10: [mem 0x9232c000-0x9232cfff 64bit]
>[    1.221070] pci 0000:00:18.0: reg 0x18: [mem 0x9232d000-0x9232dfff 64bit]
>[    1.221671] pci 0000:00:18.1: [8086:5abe] type 00 class 0x118000
>[    1.221709] pci 0000:00:18.1: reg 0x10: [mem 0x9232e000-0x9232efff 64bit]
>[    1.221738] pci 0000:00:18.1: reg 0x18: [mem 0x9232f000-0x9232ffff 64bit]
>[    1.222347] pci 0000:00:18.2: [8086:5ac0] type 00 class 0x118000
>[    1.222385] pci 0000:00:18.2: reg 0x10: [mem 0x92330000-0x92330fff 64bit]
>[    1.222405] pci 0000:00:18.2: reg 0x18: [mem 0x92331000-0x92331fff 64bit]
>[    1.223018] pci 0000:00:18.3: [8086:5aee] type 00 class 0x118000
>[    1.223054] pci 0000:00:18.3: reg 0x10: [mem 0x92332000-0x92332fff 64bit]
>[    1.223077] pci 0000:00:18.3: reg 0x18: [mem 0x92333000-0x92333fff 64bit]
>[    1.223716] pci 0000:00:19.0: [8086:5ac2] type 00 class 0x118000
>[    1.223750] pci 0000:00:19.0: reg 0x10: [mem 0x92334000-0x92334fff 64bit]
>[    1.223782] pci 0000:00:19.0: reg 0x18: [mem 0x92335000-0x92335fff 64bit]
>[    1.224384] pci 0000:00:19.1: [8086:5ac4] type 00 class 0x118000
>[    1.224421] pci 0000:00:19.1: reg 0x10: [mem 0x92336000-0x92336fff 64bit]
>[    1.224444] pci 0000:00:19.1: reg 0x18: [mem 0x92337000-0x92337fff 64bit]
>[    1.225056] pci 0000:00:19.2: [8086:5ac6] type 00 class 0x118000
>[    1.225092] pci 0000:00:19.2: reg 0x10: [mem 0x92338000-0x92338fff 64bit]
>[    1.225117] pci 0000:00:19.2: reg 0x18: [mem 0x92339000-0x92339fff 64bit]
>[    1.225747] pci 0000:00:1b.0: [8086:5aca] type 00 class 0x080501
>[    1.225783] pci 0000:00:1b.0: reg 0x10: [mem 0x9233a000-0x9233afff 64bit]
>[    1.225809] pci 0000:00:1b.0: reg 0x18: [mem 0x9233b000-0x9233bfff 64bit]
>[    1.226447] pci 0000:00:1c.0: [8086:5acc] type 00 class 0x080501
>[    1.226481] pci 0000:00:1c.0: reg 0x10: [mem 0x9233c000-0x9233cfff 64bit]
>[    1.226500] pci 0000:00:1c.0: reg 0x18: [mem 0x9233d000-0x9233dfff 64bit]
>[    1.227288] pci 0000:00:1e.0: [8086:5ad0] type 00 class 0x080501
>[    1.227323] pci 0000:00:1e.0: reg 0x10: [mem 0x9233e000-0x9233efff 64bit]
>[    1.227350] pci 0000:00:1e.0: reg 0x18: [mem 0x9233f000-0x9233ffff 64bit]
>[    1.227958] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
>[    1.228714] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
>[    1.228775] pci 0000:00:1f.1: reg 0x10: [mem 0x92341000-0x923410ff 64bit]
>[    1.228862] pci 0000:00:1f.1: reg 0x20: [io  0x2040-0x205f]
>[    1.229701] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000
>[    1.229743] pci 0000:01:00.0: reg 0x10: [mem 0x92200000-0x9221ffff]
>[    1.229787] pci 0000:01:00.0: reg 0x18: [io  0x1000-0x101f]
>[    1.229806] pci 0000:01:00.0: reg 0x1c: [mem 0x92220000-0x92223fff]
>[    1.230003] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>[    1.230093] pci 0000:01:00.0: System wakeup disabled by ACPI
>[    1.239361] pci 0000:00:13.0: PCI bridge to [bus 01]
>[    1.239367] pci 0000:00:13.0:   bridge window [io  0x1000-0x1fff]
>[    1.239373] pci 0000:00:13.0:   bridge window [mem 0x92200000-0x922fffff]
>[    1.239906] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
>[    1.240239] pci 0000:02:00.0: reg 0x10: [mem 0x92100000-0x92101fff 64bit]
>[    1.240682] pci 0000:02:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
>[    1.241474] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    1.241813] pci 0000:02:00.0: System wakeup disabled by ACPI
>[    1.251815] pci 0000:00:14.0: PCI bridge to [bus 02]
>[    1.251825] pci 0000:00:14.0:   bridge window [mem 0x92100000-0x921fffff]
>[    1.259287] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    1.259614] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    1.259765] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    1.259915] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    1.260070] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    1.260224] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    1.260378] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    1.260528] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
>[    1.262413] ACPI: Enabled 2 GPEs in block 00 to 7F
>[    1.262653] ACPI : EC: event unblocked
>[    1.262684] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x2b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    1.262688] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
>[    1.263174] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    1.263179] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    1.263194] pci 0000:00:02.0: vgaarb: bridge control possible
>[    1.263195] vgaarb: loaded
>[    1.263653] SCSI subsystem initialized
>[    1.263782] libata version 3.00 loaded.
>[    1.263828] ACPI: bus type USB registered
>[    1.263869] usbcore: registered new interface driver usbfs
>[    1.263893] usbcore: registered new interface driver hub
>[    1.263926] usbcore: registered new device driver usb
>[    1.264136] Registered efivars operations
>[    1.277300] PCI: Using ACPI for IRQ routing
>[    1.284561] PCI: pci_cache_line_size set to 64 bytes
>[    1.285123] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    1.285126] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    1.285128] e820: reserve RAM buffer [mem 0x0f000000-0x0fffffff]
>[    1.285130] e820: reserve RAM buffer [mem 0x77f06000-0x77ffffff]
>[    1.285132] e820: reserve RAM buffer [mem 0x7ac27000-0x7bffffff]
>[    1.285134] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
>[    1.285378] NetLabel: Initializing
>[    1.285381] NetLabel:  domain hash size = 128
>[    1.285382] NetLabel:  protocols = UNLABELED CIPSOv4
>[    1.285415] NetLabel:  unlabeled traffic allowed by default
>[    1.285774] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    1.285789] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
>[    1.287875] clocksource: Switched to clocksource hpet
>[    1.304086] VFS: Disk quotas dquot_6.6.0
>[    1.304123] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.304280] AppArmor: AppArmor Filesystem Enabled
>[    1.304400] pnp: PnP ACPI init
>[    1.304776] system 00:00: [io  0x06a4] has been reserved
>[    1.304781] system 00:00: [io  0x06a0] has been reserved
>[    1.304790] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.305054] pnp 00:01: disabling [io  0x164e-0x164f] because it overlaps 0000:00:13.0 BAR 13 [io  0x1000-0x1fff]
>[    1.305137] system 00:01: [io  0x0680-0x069f] has been reserved
>[    1.305141] system 00:01: [io  0x0400-0x047f] has been reserved
>[    1.305145] system 00:01: [io  0x0500-0x05fe] has been reserved
>[    1.305148] system 00:01: [io  0x0600-0x061f] has been reserved
>[    1.305155] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.305723] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
>[    1.307246] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
>[    1.307250] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
>[    1.307254] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
>[    1.307257] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
>[    1.307261] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
>[    1.307265] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
>[    1.307273] system 00:03: [mem 0xfed80000-0xfedbffff] has been reserved
>[    1.307276] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
>[    1.307280] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
>[    1.307287] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.307991] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    1.308347] pnp: PnP ACPI: found 5 devices
>[    1.320189] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    1.320262] pci 0000:00:13.0: PCI bridge to [bus 01]
>[    1.320273] pci 0000:00:13.0:   bridge window [io  0x1000-0x1fff]
>[    1.320281] pci 0000:00:13.0:   bridge window [mem 0x92200000-0x922fffff]
>[    1.320294] pci 0000:00:14.0: PCI bridge to [bus 02]
>[    1.320316] pci 0000:00:14.0:   bridge window [mem 0x92100000-0x921fffff]
>[    1.320332] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
>[    1.320336] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
>[    1.320339] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
>[    1.320343] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
>[    1.320346] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
>[    1.320349] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
>[    1.320352] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
>[    1.320356] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
>[    1.320359] pci_bus 0000:00: resource 12 [mem 0x7b800001-0x7bffffff window]
>[    1.320362] pci_bus 0000:00: resource 13 [mem 0x80000000-0xcfffffff window]
>[    1.320365] pci_bus 0000:00: resource 14 [mem 0xe0000000-0xefffffff window]
>[    1.320369] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
>[    1.320372] pci_bus 0000:01: resource 1 [mem 0x92200000-0x922fffff]
>[    1.320376] pci_bus 0000:02: resource 1 [mem 0x92100000-0x921fffff]
>[    1.320660] NET: Registered protocol family 2
>[    1.321099] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    1.322033] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    1.322742] TCP: Hash tables configured (established 131072 bind 65536)
>[    1.322843] UDP hash table entries: 8192 (order: 6, 262144 bytes)
>[    1.323123] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
>[    1.323470] NET: Registered protocol family 1
>[    1.323506] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    1.325153] PCI: CLS 64 bytes, default 64
>[    1.325269] Trying to unpack rootfs image as initramfs...
>[    2.836342] Freeing initrd memory: 35556K (ffff9cefb3a7e000 - ffff9cefb5d37000)
>[    2.836348] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    2.836353] software IO TLB [mem 0x71973000-0x75973000] (64MB) mapped at [ffff9ceff1973000-ffff9ceff5972fff]
>[    2.836664] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
>[    2.836668] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>[    2.836670] RAPL PMU: hw unit of domain package 2^-14 Joules
>[    2.836671] RAPL PMU: hw unit of domain dram 2^-14 Joules
>[    2.836673] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>[    2.836877] Scanning for low memory corruption every 60 seconds
>[    2.837799] futex hash table entries: 1024 (order: 4, 65536 bytes)
>[    2.837846] audit: initializing netlink subsys (disabled)
>[    2.837883] audit: type=2000 audit(1478695472.767:1): initialized
>[    2.838936] Initialise system trusted keyrings
>[    2.839206] workingset: timestamp_bits=40 max_order=22 bucket_order=0
>[    2.843608] zbud: loaded
>[    2.845189] fuse init (API version 7.26)
>[    2.846972] Key type asymmetric registered
>[    2.846974] Asymmetric key parser 'x509' registered
>[    2.847063] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
>[    2.847144] io scheduler noop registered
>[    2.847146] io scheduler deadline registered (default)
>[    2.847166] io scheduler cfq registered
>[    2.848477] pcieport 0000:00:13.0: Signaling PME through PCIe PME interrupt
>[    2.848481] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
>[    2.848487] pcie_pme 0000:00:13.0:pcie001: service driver pcie_pme loaded
>[    2.848547] pcieport 0000:00:14.0: Signaling PME through PCIe PME interrupt
>[    2.848550] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
>[    2.848571] pcie_pme 0000:00:14.0:pcie001: service driver pcie_pme loaded
>[    2.848584] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    2.848596] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    2.848676] efifb: probing for efifb
>[    2.848710] efifb: framebuffer at 0x80000000, using 8128k, total 8128k
>[    2.848712] efifb: mode is 1920x1080x32, linelength=7680, pages=1
>[    2.848713] efifb: scrolling: redraw
>[    2.848717] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    2.864284] Console: switching to colour frame buffer device 240x67
>[    2.879441] fb0: EFI VGA frame buffer device
>[    2.879462] intel_idle: does not run on family 6 model 92
>[    2.879645] ACPI: AC Adapter [ADP1] (off-line)
>[    2.880282] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C09:00/PNP0C0D:00/input/input0
>[    2.880774] ACPI: Lid Switch [LID0]
>[    2.880905] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>[    2.880912] ACPI: Power Button [PWRB]
>[    2.881009] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    2.881014] ACPI: Power Button [PWRF]
>[    2.900017] thermal LNXTHERM:00: registered as thermal_zone0
>[    2.900021] ACPI: Thermal Zone [TZ01] (35 C)
>[    2.900101] GHES: HEST is not enabled!
>[    2.900394] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
>[    2.900408] ACPI: Battery Slot [BAT0] (battery present)
>[    2.900504] ACPI: Battery Slot [BAT1] (battery absent)
>[    2.921246] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    2.925800] Linux agpgart interface v0.103
>[    2.934453] brd: module loaded
>[    2.937961] loop: module loaded
>[    2.938463] libphy: Fixed MDIO Bus: probed
>[    2.938465] tun: Universal TUN/TAP device driver, 1.6
>[    2.938467] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>[    2.938573] PPP generic driver version 2.4.2
>[    2.938693] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    2.938700] ehci-pci: EHCI PCI platform driver
>[    2.938725] ehci-platform: EHCI generic platform driver
>[    2.938750] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    2.938754] ohci-pci: OHCI PCI platform driver
>[    2.938779] ohci-platform: OHCI generic platform driver
>[    2.938796] uhci_hcd: USB Universal Host Controller Interface driver
>[    2.939192] xhci_hcd 0000:00:15.0: xHCI Host Controller
>[    2.939205] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
>[    2.940355] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01009810
>[    2.940364] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
>[    2.940556] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    2.940560] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.940563] usb usb1: Product: xHCI Host Controller
>[    2.940566] usb usb1: Manufacturer: Linux 4.9.0-rc8latestfirmware+ xhci-hcd
>[    2.940569] usb usb1: SerialNumber: 0000:00:15.0
>[    2.940866] hub 1-0:1.0: USB hub found
>[    2.940889] hub 1-0:1.0: 8 ports detected
>[    2.942744] xhci_hcd 0000:00:15.0: xHCI Host Controller
>[    2.942752] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
>[    2.942838] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    2.942842] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    2.942845] usb usb2: Product: xHCI Host Controller
>[    2.942848] usb usb2: Manufacturer: Linux 4.9.0-rc8latestfirmware+ xhci-hcd
>[    2.942851] usb usb2: SerialNumber: 0000:00:15.0
>[    2.943133] hub 2-0:1.0: USB hub found
>[    2.943161] hub 2-0:1.0: 7 ports detected
>[    2.945000] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    2.945002] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    2.945515] i8042: Warning: Keylock active
>[    2.945729] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    2.946004] mousedev: PS/2 mouse device common for all mice
>[    2.946425] rtc_cmos 00:04: RTC can wake from S4
>[    2.946922] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>[    2.947025] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    2.947038] i2c /dev entries driver
>[    2.947170] device-mapper: uevent: version 1.0.3
>[    2.947335] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
>[    2.947357] intel_pstate: Intel P-state driver initializing
>[    2.947860] ledtrig-cpu: registered to indicate activity on CPUs
>[    2.947863] EFI Variables Facility v0.08 2004-May-17
>[    2.961033] NET: Registered protocol family 10
>[    2.961321] NET: Registered protocol family 17
>[    2.961332] Key type dns_resolver registered
>[    2.961674] microcode: sig=0x506c9, pf=0x1, revision=0x12
>[    2.961781] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    2.962032] registered taskstats version 1
>[    2.962037] Loading compiled-in X.509 certificates
>[    2.965970] Loaded X.509 cert 'Build time autogenerated kernel key: 027be87dd562b2d1f47b928dcb9fd3e5a10593fd'
>[    2.966010] zswap: loaded using pool lzo/zbud
>[    2.968858] Key type trusted registered
>[    2.973607] Key type encrypted registered
>[    2.973609] AppArmor: AppArmor sha1 policy hashing enabled
>[    2.973612] ima: No TPM chip found, activating TPM-bypass!
>[    2.973636] evm: HMAC attrs: 0x1
>[    2.974527]   Magic number: 8:662:733
>[    2.974562] hwmon hwmon0: hash matches
>[    2.974812] rtc_cmos 00:04: setting system clock to 2016-11-09 12:44:33 UTC (1478695473)
>[    2.974925] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>[    2.974926] EDD information not available.
>[    2.974999] PM: Checking hibernation image partition /dev/sda3
>[    3.167946] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
>[    3.267943] usb 1-4: new low-speed USB device number 2 using xhci_hcd
>[    3.421499] usb 1-4: New USB device found, idVendor=045e, idProduct=0780
>[    3.421501] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.421503] usb 1-4: Product: Comfort Curve Keyboard 3000
>[    3.421504] usb 1-4: Manufacturer: Microsoft
>[    3.423918] atkbd serio0: Failed to enable keyboard on isa0060/serio0
>[    3.424028] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    3.424166] PM: Hibernation image not present or could not be loaded.
>[    3.426095] Freeing unused kernel memory: 1556K (ffffffff81f69000 - ffffffff820ee000)
>[    3.426098] Write protecting the kernel read-only data: 14336k
>[    3.426733] Freeing unused kernel memory: 1584K (ffff9cf12e874000 - ffff9cf12ea00000)
>[    3.427562] Freeing unused kernel memory: 280K (ffff9cf12edba000 - ffff9cf12ee00000)
>[    3.443714] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    3.443828] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    3.443848] random: systemd-udevd: uninitialized urandom read (16 bytes read)
>[    3.444927] random: udevadm: uninitialized urandom read (16 bytes read)
>[    3.444981] random: udevadm: uninitialized urandom read (16 bytes read)
>[    3.447334] random: udevadm: uninitialized urandom read (16 bytes read)
>[    3.447359] random: udevadm: uninitialized urandom read (16 bytes read)
>[    3.447975] random: udevadm: uninitialized urandom read (16 bytes read)
>[    3.448060] random: udevadm: uninitialized urandom read (16 bytes read)
>[    3.448135] random: udevadm: uninitialized urandom read (16 bytes read)
>[    3.509406] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
>[    3.531717] hidraw: raw HID events driver (C) Jiri Kosina
>[    3.538695] ahci 0000:00:12.0: version 3.0
>[    3.539935] usb 1-7: new full-speed USB device number 3 using xhci_hcd
>[    3.543008] [drm] Initialized
>[    3.543087] pps_core: LinuxPPS API ver. 1 registered
>[    3.543088] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    3.544789] PTP clock support registered
>[    3.546365] dca service started, version 1.12.1
>[    3.547259] sdhci: Secure Digital Host Controller Interface driver
>[    3.547260] sdhci: Copyright(c) Pierre Ossman
>[    3.549054] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
>[    3.549058] ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst 
>[    3.552195] scsi host0: ahci
>[    3.552317] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
>[    3.552318] igb: Copyright (c) 2007-2014 Intel Corporation.
>[    3.552332] ata1: SATA max UDMA/133 abar m2048@0x92340000 port 0x92340100 irq 368
>[    3.552407] sdhci-pci 0000:00:1b.0: SDHCI controller found [8086:5aca] (rev a)
>[    3.556569] mmc0: SDHCI controller on PCI [0000:00:1b.0] using ADMA 64-bit
>[    3.556790] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev a)
>[    3.561729] mmc1: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
>[    3.561768] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev a)
>[    3.567125] mmc2: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit
>[    3.583425] pps pps0: new PPS source ptp0
>[    3.583428] igb 0000:01:00.0: added PHC on eth0
>[    3.583430] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
>[    3.583432] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 90:49:fa:01:93:40
>[    3.583434] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
>[    3.583436] igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
>[    3.586340] Setting dangerous option enable_guc_loading - tainting kernel
>[    3.586344] Setting dangerous option enable_guc_submission - tainting kernel
>[    3.586894] [drm:i915_driver_load [i915]] No PCH found.
>[    3.586932] [drm:intel_power_domains_init [i915]] Allowed DC state mask 09
>[    3.587375] [drm:intel_device_info_dump [i915]] i915 device info: gen=9, pciid=0x5a84 rev=0x0a
>[    3.587416] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: no
>[    3.587449] [drm:intel_device_info_dump [i915]] i915 device info: is_i85x: no
>[    3.587481] [drm:intel_device_info_dump [i915]] i915 device info: is_i915g: no
>[    3.587513] [drm:intel_device_info_dump [i915]] i915 device info: is_i945gm: no
>[    3.587545] [drm:intel_device_info_dump [i915]] i915 device info: is_g33: no
>[    3.587578] [drm:intel_device_info_dump [i915]] i915 device info: is_g4x: no
>[    3.587610] [drm:intel_device_info_dump [i915]] i915 device info: is_pineview: no
>[    3.587642] [drm:intel_device_info_dump [i915]] i915 device info: is_broadwater: no
>[    3.587675] [drm:intel_device_info_dump [i915]] i915 device info: is_crestline: no
>[    3.587706] [drm:intel_device_info_dump [i915]] i915 device info: is_ivybridge: no
>[    3.587739] [drm:intel_device_info_dump [i915]] i915 device info: is_valleyview: no
>[    3.587770] [drm:intel_device_info_dump [i915]] i915 device info: is_cherryview: no
>[    3.587802] [drm:intel_device_info_dump [i915]] i915 device info: is_haswell: no
>[    3.587834] [drm:intel_device_info_dump [i915]] i915 device info: is_broadwell: no
>[    3.587866] [drm:intel_device_info_dump [i915]] i915 device info: is_skylake: no
>[    3.587898] [drm:intel_device_info_dump [i915]] i915 device info: is_broxton: yes
>[    3.587958] [drm:intel_device_info_dump [i915]] i915 device info: is_geminilake: no
>[    3.587990] [drm:intel_device_info_dump [i915]] i915 device info: is_kabylake: no
>[    3.588023] [drm:intel_device_info_dump [i915]] i915 device info: is_lp: yes
>[    3.588055] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: no
>[    3.588087] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: yes
>[    3.588119] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: yes
>[    3.588152] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: yes
>[    3.588183] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: yes
>[    3.588215] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: yes
>[    3.588247] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: yes
>[    3.588279] [drm:intel_device_info_dump [i915]] i915 device info: has_gmbus_irq: yes
>[    3.588311] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: no
>[    3.588343] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: yes
>[    3.588375] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes
>[    3.588407] [drm:intel_device_info_dump [i915]] i915 device info: has_hw_contexts: yes
>[    3.588440] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: no
>[    3.588472] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: no
>[    3.588504] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: yes
>[    3.588536] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no
>[    3.588567] [drm:intel_device_info_dump [i915]] i915 device info: has_pipe_cxsr: no
>[    3.588599] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no
>[    3.588631] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: no
>[    3.588663] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes
>[    3.588695] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no
>[    3.588727] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: yes
>[    3.588759] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: yes
>[    3.588791] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: no
>[    3.588823] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no
>[    3.588855] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no
>[    3.588887] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no
>[    3.588919] [drm:intel_device_info_dump [i915]] i915 device info: supports_tv: no
>[    3.588951] [drm:intel_device_info_dump [i915]] i915 device info: has_decoupled_mmio: yes
>[    3.589318] [drm:intel_device_info_runtime_init [i915]] slice mask: 0001
>[    3.589351] [drm:intel_device_info_runtime_init [i915]] slice total: 1
>[    3.589384] [drm:intel_device_info_runtime_init [i915]] subslice total: 3
>[    3.589416] [drm:intel_device_info_runtime_init [i915]] subslice mask 0007
>[    3.589447] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 3
>[    3.589479] [drm:intel_device_info_runtime_init [i915]] EU total: 18
>[    3.589517] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 6
>[    3.589549] [drm:intel_device_info_runtime_init [i915]] has slice power gating: n
>[    3.589581] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: y
>[    3.589612] [drm:intel_device_info_runtime_init [i915]] has EU power gating: y
>[    3.589645] [drm:i915_driver_load [i915]] ppgtt mode: 3
>[    3.589678] [drm:i915_driver_load [i915]] use GPU sempahores? no
>[    3.589960] [drm] Memory usable by graphics device = 4096M
>[    3.590009] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
>[    3.590043] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 64M
>[    3.590046] checking generic (80000000 7f0000) vs hw (80000000 10000000)
>[    3.590046] fb: switching to inteldrmfb from EFI VGA
>[    3.590081] Console: switching to colour dummy device 80x25
>[    3.590211] [drm] Replacing VGA console driver
>[    3.590291] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K
>[    3.590392] [drm:sanitize_rc6_option [i915]] BIOS enabled RC states: HW_CTRL off HW_RC6 off SW_TARGET_STATE 4
>[    3.590571] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79cff018
>[    3.590623] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[    3.590658] [drm:intel_opregion_setup [i915]] ASLE supported
>[    3.590694] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    3.590774] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    3.590775] [drm] Driver supports precise vblank timestamp query.
>[    3.590819] [drm:intel_bios_init [i915]] Set default to SSC at 100000 kHz
>[    3.590856] [drm:intel_bios_init [i915]] VBT signature "$VBT BROXTON        ", BDB version 206
>[    3.590893] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    3.590928] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
>[    3.590966] [drm:intel_opregion_get_panel_type [i915]] Failed to get panel details from OpRegion (-19)
>[    3.591003] [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
>[    3.591039] [drm:intel_bios_init [i915]] DRRS supported mode is static
>[    3.591076] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
>[    3.591099] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 0 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x8 0xa
>[    3.591137] [drm:intel_bios_init [i915]] VBT initial LVDS value 30033c
>[    3.591173] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255
>[    3.591210] [drm:intel_bios_init [i915]] Unsupported child device size for SDVO mapping.
>[    3.591246] [drm:intel_bios_init [i915]] Expected child device config size for VBT version 206 not known; assuming 38
>[    3.591282] [drm:intel_bios_init [i915]] DRRS State Enabled:1
>[    3.591320] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    3.591356] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0
>[    3.591393] [drm:intel_bios_init [i915]] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    3.591429] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 8
>[    3.591465] [drm:intel_bios_init [i915]] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
>[    3.591500] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 8
>[    3.591600] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
>[    3.591652] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[    3.591689] [drm:intel_power_well_enable [i915]] enabling power well 1
>[    3.591732] [drm:intel_update_cdclk [i915]] Current CD clock rate: 624000 kHz, VCO: 1248000 kHz, ref: 19200 kHz
>[    3.591780] [drm:intel_power_well_enable [i915]] enabling always-on
>[    3.591814] [drm:intel_power_well_enable [i915]] enabling DC off
>[    3.591847] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[    3.591884] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.591976] [drm:intel_power_well_enable [i915]] enabling dpio-common-a
>[    3.592035] [drm:_bxt_ddi_phy_init [i915]] DDI PHY 1 already enabled, won't reprogram it
>[    3.592069] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
>[    3.592138] [drm:_bxt_ddi_phy_init [i915]] DDI PHY 0 already enabled, won't reprogram it
>[    3.592210] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[    3.592303] [drm:_bxt_ddi_phy_init [i915]] DDI PHY 1 already enabled, won't reprogram it
>[    3.592377] [drm:_bxt_ddi_phy_init [i915]] DDI PHY 0 already enabled, won't reprogram it
>[    3.592417] [drm:intel_csr_ucode_init [i915]] Loading i915/bxt_dmc_ver1_07.bin
>[    3.592729] [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.7)
>[    3.593217] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0
>[    3.593267] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 7 (7.0 usec)
>[    3.593300] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 7 (7.0 usec)
>[    3.593333] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 8 (8.0 usec)
>[    3.593366] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 22 (22.0 usec)
>[    3.593398] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 22 (22.0 usec)
>[    3.593431] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 22 (22.0 usec)
>[    3.593463] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 22 (22.0 usec)
>[    3.593496] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 22 (22.0 usec)
>[    3.593533] [drm:intel_modeset_init [i915]] 3 display pipes available.
>[    3.593623] [drm:intel_update_cdclk [i915]] Current CD clock rate: 624000 kHz, VCO: 1248000 kHz, ref: 19200 kHz
>[    3.593661] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 624000 kHz
>[    3.593698] [drm:intel_update_max_cdclk [i915]] Max dotclock rate: 624000 kHz
>[    3.593706] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    3.594062] [drm:intel_ddi_init [i915]] BXT BIOS forgot to set DDI_A_4_LANES for port A; fixing
>[    3.594101] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A
>[    3.594157] [drm:intel_dp_init_connector [i915]] using AUX A for port A (VBT)
>[    3.594201] [drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 5000
>[    3.594236] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    3.594272] [drm:intel_dp_init_panel_power_sequencer.part.18 [i915]] panel power up delay 200, power down delay 50, power cycle delay 500
>[    3.594307] [drm:intel_dp_init_panel_power_sequencer.part.18 [i915]] backlight on delay 1, off delay 200
>[    3.594343] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
>[    3.594383] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[    3.594420] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
>[    3.594910] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 82 41 00 00 01 80 02 00 00 00 0f 0b 00
>[    3.595329] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID b\006UA\021\001 HW-rev 10.0 SW-rev 1.8
>[    3.595666] [drm:intel_dp_init_connector [i915]] Detected EDP PSR Panel.
>[    3.596178] [drm:intel_dp_init_connector [i915]] EDP DPCD : 02 fb c7
>[    3.600409] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    3.600461] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS
>[    3.600689] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 96000/96000
>[    3.600741] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B
>[    3.600797] [drm:intel_dp_init_connector [i915]] using AUX B for port B (VBT)
>[    3.600838] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B
>[    3.600878] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x1 for port B (VBT)
>[    3.600917] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C
>[    3.600955] [drm:intel_dp_init_connector [i915]] using AUX C for port C (VBT)
>[    3.600994] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C
>[    3.601034] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x2 for port C (VBT)
>[    3.601069] [drm:intel_dsi_init [i915]] 
>[    3.601149] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:33:pipe A] hw state readout: enabled
>[    3.601209] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:42:pipe B] hw state readout: enabled
>[    3.601248] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:49:pipe C] hw state readout: disabled
>[    3.601306] [drm:intel_modeset_setup_hw_state [i915]] PORT PLL A hw state readout: crtc_mask 0x00000001, on 1
>[    3.601343] [drm:intel_modeset_setup_hw_state [i915]] PORT PLL B hw state readout: crtc_mask 0x00000000, on 0
>[    3.601394] [drm:intel_modeset_setup_hw_state [i915]] PORT PLL C hw state readout: crtc_mask 0x00000002, on 1
>[    3.601447] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:50:DDI A] hw state readout: enabled, pipe A
>[    3.601484] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:58:DDI B] hw state readout: disabled, pipe A
>[    3.601520] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:60:DP-MST A] hw state readout: disabled, pipe A
>[    3.601556] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:61:DP-MST B] hw state readout: disabled, pipe B
>[    3.601592] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:62:DP-MST C] hw state readout: disabled, pipe C
>[    3.601647] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:65:DDI C] hw state readout: enabled, pipe B
>[    3.601682] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:67:DP-MST A] hw state readout: disabled, pipe A
>[    3.601718] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:68:DP-MST B] hw state readout: disabled, pipe B
>[    3.601754] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:69:DP-MST C] hw state readout: disabled, pipe C
>[    3.601792] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:51:eDP-1] hw state readout: enabled
>[    3.601829] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:59:DP-1] hw state readout: disabled
>[    3.601865] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:63:HDMI-A-1] hw state readout: disabled
>[    3.601903] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:66:DP-2] hw state readout: enabled
>[    3.601941] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:70:HDMI-A-2] hw state readout: disabled
>[    3.602007] [drm:intel_dump_pipe_config [i915]] [CRTC:33:pipe A][setup_hw_state]
>[    3.602044] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[    3.602081] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64
>[    3.602117] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    3.602153] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    3.602176] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138119 1920 1968 2018 2052 1080 1084 1086 1122 0x40 0xa
>[    3.602217] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    3.602235] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138119 1920 1968 2018 2052 1080 1084 1086 1122 0x40 0xa
>[    3.602273] [drm:intel_dump_pipe_config [i915]] crtc timings: 138119 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x40 flags: 0xa
>[    3.602309] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080
>[    3.602346] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0
>[    3.602382] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x07800438, enabled
>[    3.602418] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    3.602455] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d
>[    3.602491] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    3.602528] [drm:intel_dump_pipe_config [i915]] [PLANE:25:plane 1A] disabled, scaler_id = -1
>[    3.602564] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1
>[    3.602600] [drm:intel_dump_pipe_config [i915]] [PLANE:29:plane 3A] disabled, scaler_id = -1
>[    3.602636] [drm:intel_dump_pipe_config [i915]] [PLANE:31:cursor A] disabled, scaler_id = -1
>[    3.602689] [drm:intel_dump_pipe_config [i915]] [CRTC:42:pipe B][setup_hw_state]
>[    3.602725] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0
>[    3.602761] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    3.602796] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    3.602818] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1200" 105 270000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9
>[    3.602856] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    3.602872] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1200" 105 270000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9
>[    3.602909] [drm:intel_dump_pipe_config [i915]] crtc timings: 270000 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x40 flags: 0x9
>[    3.602945] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080
>[    3.602981] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0
>[    3.603017] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x078004b0, enabled
>[    3.603053] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    3.603090] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d
>[    3.603126] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    3.603162] [drm:intel_dump_pipe_config [i915]] [PLANE:34:plane 1B] disabled, scaler_id = -1
>[    3.603198] [drm:intel_dump_pipe_config [i915]] [PLANE:36:plane 2B] disabled, scaler_id = -1
>[    3.603234] [drm:intel_dump_pipe_config [i915]] [PLANE:38:plane 3B] disabled, scaler_id = -1
>[    3.603270] [drm:intel_dump_pipe_config [i915]] [PLANE:40:cursor B] disabled, scaler_id = -1
>[    3.603308] [drm:intel_dump_pipe_config [i915]] [CRTC:49:pipe C][setup_hw_state]
>[    3.603344] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[    3.603379] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    3.603415] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    3.603436] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.603472] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    3.603488] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.603525] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    3.603561] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0
>[    3.603597] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: 0
>[    3.603633] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.603668] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    3.603705] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0
>[    3.603741] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    3.603778] [drm:intel_dump_pipe_config [i915]] [PLANE:43:plane 1C] disabled, scaler_id = -1
>[    3.603814] [drm:intel_dump_pipe_config [i915]] [PLANE:45:plane 2C] disabled, scaler_id = -1
>[    3.603850] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor C] disabled, scaler_id = -1
>[    3.603990] [drm:skylake_get_initial_plane_config [i915]] pipe A with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    3.604030] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    3.604089] [drm:intel_alloc_initial_plane_obj.isra.126 [i915]] initial plane fb obj ffff9cf3e6594000
>[    3.604129] [drm:skylake_get_initial_plane_config [i915]] pipe B with fb: size=1920x1080@32, offset=0, pitch 7680, size 0x7e9000
>[    3.604165] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=7e9000
>[    3.604201] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] failed to allocate stolen space
>[    3.604239] [drm:intel_huc_init [i915]] HuC firmware pending, path i915/bxt_huc_ver01_07_1398.bin
>[    3.604276] [drm:intel_uc_fw_fetch [i915]] before requesting firmware: uC fw fetch status PENDING
>[    3.604434] [drm:intel_uc_fw_fetch [i915]] fetch uC fw from i915/bxt_huc_ver01_07_1398.bin succeeded, fw ffff9cf3e5db5b40
>[    3.604472] [drm:intel_uc_fw_fetch [i915]] firmware version 1.7 OK (minimum 1.7)
>[    3.604623] [drm:intel_uc_fw_fetch [i915]] uC fw fetch status SUCCESS, obj ffff9cf3e65942c0
>[    3.604671] [drm:intel_guc_init [i915]] GuC firmware pending, path i915/bxt_guc_ver8_7.bin
>[    3.604707] [drm:intel_uc_fw_fetch [i915]] before requesting firmware: uC fw fetch status PENDING
>[    3.604826] [drm:intel_uc_fw_fetch [i915]] fetch uC fw from i915/bxt_guc_ver8_7.bin succeeded, fw ffff9cf3e5db5b40
>[    3.604862] [drm:intel_uc_fw_fetch [i915]] firmware version 8.7 OK (minimum 8.7)
>[    3.605000] [drm:intel_uc_fw_fetch [i915]] uC fw fetch status SUCCESS, obj ffff9cf3e6594580
>[    3.605258] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [7eb000, fffff000]
>[    3.605292] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [7e9000, 7ea000]
>[    3.605357] [drm:i915_gem_context_init [i915]] LR context support initialized
>[    3.605411] [drm:intel_engine_create_scratch [i915]] render ring pipe control offset: 0xffffe000
>[    3.607757] [drm:gen8_init_common_ring [i915]] Execlists enabled for render ring
>[    3.607873] [drm:gen8_init_common_ring [i915]] Execlists enabled for blitter ring
>[    3.608007] [drm:gen8_init_common_ring [i915]] Execlists enabled for bsd ring
>[    3.608106] [drm:gen8_init_common_ring [i915]] Execlists enabled for video enhancement ring
>[    3.608149] [drm:intel_guc_setup [i915]] GuC fw status: path i915/bxt_guc_ver8_7.bin, fetch SUCCESS, load NONE
>[    3.608193] [drm:intel_guc_setup [i915]] GuC fw status: fetch SUCCESS, load PENDING
>[    3.608240] [drm:intel_huc_load [i915]] i915/bxt_huc_ver01_07_1398.bin fw status: fetch SUCCESS, load NONE
>[    3.610369] [drm:intel_huc_load [i915]] HuC DMA transfer wait over with ret 0
>[    3.610406] [drm:intel_huc_load [i915]] i915/bxt_huc_ver01_07_1398.bin fw status: fetch SUCCESS, load SUCCESS
>[    3.611693] igb 0000:01:00.0 enp1s0: renamed from eth0
>[    3.615964] [drm:guc_ucode_xfer_dma [i915]] DMA status 0x10, GuC status 0x8002f0ec
>[    3.616001] [drm:guc_ucode_xfer_dma [i915]] returning 0
>[    3.616038] [drm:intel_guc_setup [i915]] GuC fw status: fetch SUCCESS, load SUCCESS
>[    3.622016] [drm:intel_update_cdclk [i915]] Current CD clock rate: 624000 kHz, VCO: 1248000 kHz, ref: 19200 kHz
>[    3.622070] [drm:intel_fbdev_init [i915]] found possible fb from plane A
>[    3.622106] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping
>[    3.622141] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb
>[    3.622178] [drm:intel_fbdev_init [i915]] pipe A area: 1920x1080, bpp: 32, size: 8294400
>[    3.622213] [drm:intel_fbdev_init [i915]] fb big enough for plane A (8294400 >= 8294400)
>[    3.622248] [drm:intel_fbdev_init [i915]] checking plane B for BIOS fb
>[    3.622283] [drm:intel_fbdev_init [i915]] pipe B area: 1920x1200, bpp: 32, size: 9216000
>[    3.622318] [drm:intel_fbdev_init [i915]] fb not big enough for plane B (9216000 vs 8294400)
>[    3.622352] [drm:intel_fbdev_init [i915]] BIOS fb not suitable for all pipes, not using
>[    3.622402] [drm:bxt_hpd_irq_setup [i915]] Invert bit setting: hp_ctl:18001818 hp_port:38
>[    3.622444] [drm:intel_dp_detect [i915]] [CONNECTOR:51:eDP-1]
>[    3.622483] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[    3.622520] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    3.622555] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    3.622592] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    3.625244] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID b\006UA\021\001 HW-rev 10.0 SW-rev 1.8
>[    3.625546] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:51:eDP-1] status updated from unknown to connected
>[    3.625593] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[    3.625603] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:59:DP-1] status updated from unknown to disconnected
>[    3.625640] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-1]
>[    3.627573] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    3.627608] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    3.627794] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    3.627820] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.628020] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    3.628186] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    3.628383] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    3.628400] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    3.628410] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:63:HDMI-A-1] status updated from unknown to disconnected
>[    3.628447] [drm:intel_dp_detect [i915]] [CONNECTOR:66:DP-2]
>[    3.630738] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 84 01 01 00 01 00 02 02 06 05 00 00 00
>[    3.634754] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[    3.634791] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    3.634827] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    3.634864] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    3.638780] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-00-00(NS) dev-ID  HW-rev 0.0 SW-rev 0.0
>[    3.638815] [drm:intel_dp_detect [i915]] Sink is not MST capable
>[    3.659400] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:66:DP-2] status updated from unknown to connected
>[    3.659440] [drm:intel_hdmi_detect [i915]] [CONNECTOR:70:HDMI-A-2]
>[    3.659642] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.659676] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.659879] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.659922] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.660129] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.660163] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.660430] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.660440] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    3.660448] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:70:HDMI-A-2] status updated from unknown to disconnected
>[    3.662819] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered
>[    3.662859] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1
>[    3.663040] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1
>[    3.663233] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-2
>[    3.663474] [drm:intel_opregion_register [i915]] 5 outputs detected
>[    3.664761] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    3.665081] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
>[    3.665212] [drm] Initialized i915 1.6.0 20161205 for 0000:00:02.0 on minor 0
>[    3.665354] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    3.665363] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:51:eDP-1]
>[    3.665412] [drm:intel_dp_detect [i915]] [CONNECTOR:51:eDP-1]
>[    3.665452] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[    3.665493] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    3.665528] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    3.665563] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    3.666017] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID b\006UA\021\001 HW-rev 10.0 SW-rev 1.8
>[    3.666375] ------------[ cut here ]------------
>[    3.666415] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_dp.c:4018 intel_dp_check_link_status+0x1d7/0x200 [i915]
>[    3.666415] WARN_ON_ONCE(!intel_dp->lane_count)
>[    3.666417] Modules linked in:
>[    3.666418]  i915 drm_kms_helper igb sdhci_pci syscopyarea sysfillrect sdhci dca sysimgblt ptp fb_sys_fops pps_core i2c_algo_bit drm ahci libahci i2c_hid hid video fjes pinctrl_broxton pinctrl_intel
>[    3.666435] CPU: 0 PID: 6 Comm: kworker/u8:0 Tainted: G     U          4.9.0-rc8latestfirmware+ #1
>[    3.666436] Hardware name: Intel Corp. Broxton P/NOTEBOOK, BIOS APLKRVPA.X64.0144.B10.1606270006 06/27/2016
>[    3.666441] Workqueue: events_unbound async_run_entry_fn
>[    3.666443]  ffffbc9c018e7b38 ffffffff813fcfc3 ffffbc9c018e7b88 0000000000000000
>[    3.666446]  ffffbc9c018e7b78 ffffffff81083fcb 00000fb200000000 ffff9cf3e5f980f0
>[    3.666449]  0000000000000001 ffff9cf3e5540000 ffff9cf3e5540258 ffff9cf3e5f98000
>[    3.666452] Call Trace:
>[    3.666457]  [<ffffffff813fcfc3>] dump_stack+0x63/0x90
>[    3.666460]  [<ffffffff81083fcb>] __warn+0xcb/0xf0
>[    3.666461]  [<ffffffff8108404f>] warn_slowpath_fmt+0x5f/0x80
>[    3.666472]  [<ffffffffc04924b7>] ? drm_dp_dpcd_read+0x57/0x70 [drm_kms_helper]
>[    3.666508]  [<ffffffffc056de17>] intel_dp_check_link_status+0x1d7/0x200 [i915]
>[    3.666543]  [<ffffffffc05741ff>] intel_dp_detect+0x6af/0xa30 [i915]
>[    3.666551]  [<ffffffffc04a003f>] ? drm_fb_helper_dpms.isra.13+0xbf/0x130 [drm_kms_helper]
>[    3.666558]  [<ffffffffc0492fcf>] drm_helper_probe_single_connector_modes+0x29f/0x510 [drm_kms_helper]
>[    3.666565]  [<ffffffffc04a127b>] drm_setup_crtcs+0x7b/0x9d0 [drm_kms_helper]
>[    3.666568]  [<ffffffff810b9b88>] ? select_task_rq_fair+0x6c8/0x820
>[    3.666575]  [<ffffffffc04a1c49>] drm_fb_helper_initial_config+0x79/0x3d0 [drm_kms_helper]
>[    3.666577]  [<ffffffff810b0a89>] ? try_to_wake_up+0x59/0x3e0
>[    3.666612]  [<ffffffffc0564828>] intel_fbdev_initial_config+0x18/0x30 [i915]
>[    3.666614]  [<ffffffff810a8637>] async_run_entry_fn+0x37/0x150
>[    3.666617]  [<ffffffff8109ed1b>] process_one_work+0x16b/0x480
>[    3.666618]  [<ffffffff8109f07b>] worker_thread+0x4b/0x500
>[    3.666620]  [<ffffffff8109f030>] ? process_one_work+0x480/0x480
>[    3.666622]  [<ffffffff810a52d9>] kthread+0xd9/0xf0
>[    3.666624]  [<ffffffff810a5200>] ? kthread_park+0x60/0x60
>[    3.666627]  [<ffffffff8186b635>] ret_from_fork+0x25/0x30
>[    3.666629] ---[ end trace 039464aec115c297 ]---
>[    3.666668] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    3.666680] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:51:eDP-1] probed modes :
>[    3.666697] [drm:drm_mode_debug_printmodeline [drm]] Modeline 52:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[    3.666705] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1]
>[    3.666743] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[    3.666753] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1] disconnected
>[    3.666761] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-1]
>[    3.666796] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-1]
>[    3.666994] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    3.667029] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    3.667216] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    3.667233] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.667422] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    3.667456] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    3.667644] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    3.667652] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    3.667660] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-1] disconnected
>[    3.667667] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:DP-2]
>[    3.667702] [drm:intel_dp_detect [i915]] [CONNECTOR:66:DP-2]
>[    3.668167] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 84 01 01 00 01 00 02 02 06 05 00 00 00
>[    3.668513] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[    3.668550] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    3.668584] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    3.668619] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    3.669054] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-00-00(NS) dev-ID  HW-rev 0.0 SW-rev 0.0
>[    3.669089] [drm:intel_dp_detect [i915]] Sink is not MST capable
>[    3.669477] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    3.669489] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:DP-2] probed modes :
>[    3.669506] [drm:drm_mode_debug_printmodeline [drm]] Modeline 75:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    3.669522] [drm:drm_mode_debug_printmodeline [drm]] Modeline 79:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
>[    3.669538] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    3.669554] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[    3.669571] [drm:drm_mode_debug_printmodeline [drm]] Modeline 80:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
>[    3.669587] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    3.669603] [drm:drm_mode_debug_printmodeline [drm]] Modeline 77:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
>[    3.669619] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
>[    3.669635] [drm:drm_mode_debug_printmodeline [drm]] Modeline 81:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    3.669651] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    3.669667] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    3.669683] [drm:drm_mode_debug_printmodeline [drm]] Modeline 85:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    3.669690] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:HDMI-A-2]
>[    3.669725] [drm:intel_hdmi_detect [i915]] [CONNECTOR:70:HDMI-A-2]
>[    3.669918] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.669953] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.670141] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    3.670156] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.670339] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.670373] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    3.670561] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    3.670569] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    3.670576] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:HDMI-A-2] disconnected
>[    3.670585] [drm:drm_setup_crtcs [drm_kms_helper]] connector 51 enabled? yes
>[    3.670591] [drm:drm_setup_crtcs [drm_kms_helper]] connector 59 enabled? no
>[    3.670598] [drm:drm_setup_crtcs [drm_kms_helper]] connector 63 enabled? no
>[    3.670605] [drm:drm_setup_crtcs [drm_kms_helper]] connector 66 enabled? yes
>[    3.670612] [drm:drm_setup_crtcs [drm_kms_helper]] connector 70 enabled? no
>[    3.670651] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector eDP-1
>[    3.670686] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector eDP-1 0
>[    3.670723] [drm:intel_fb_initial_config [i915]] connector eDP-1 on [CRTC:33:pipe A]: 1920x1080
>[    3.670759] [drm:intel_fb_initial_config [i915]] connector DP-1 not enabled, skipping
>[    3.670793] [drm:intel_fb_initial_config [i915]] connector HDMI-A-1 not enabled, skipping
>[    3.670829] [drm:intel_fb_initial_config [i915]] looking for cmdline mode on connector DP-2
>[    3.670863] [drm:intel_fb_initial_config [i915]] looking for preferred mode on connector DP-2 0
>[    3.670900] [drm:intel_fb_initial_config [i915]] connector DP-2 on [CRTC:42:pipe B]: 1920x1200
>[    3.670934] [drm:intel_fb_initial_config [i915]] connector HDMI-A-2 not enabled, skipping
>[    3.670944] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1080 set on crtc 33 (0,0)
>[    3.670951] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1920x1200 set on crtc 42 (0,0)
>[    3.670987] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
>[    3.674055] [drm:intelfb_create [i915]] allocated 1920x1200 fb: 0x00880000
>[    3.674184] fbcon: inteldrmfb (fb0) is primary device
>[    3.674338] [drm:intel_atomic_check [i915]] [CONNECTOR:51:eDP-1] checking for sink bpp constrains
>[    3.674375] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
>[    3.674414] [drm:skl_update_scaler [i915]] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0
>[    3.674451] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz
>[    3.674493] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24
>[    3.674527] [drm:intel_dp_compute_config [i915]] DP link bw required 414360 available 540000
>[    3.674566] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[    3.674605] [drm:intel_dump_pipe_config [i915]] [CRTC:33:pipe A][modeset]
>[    3.674643] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[    3.674680] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64
>[    3.674716] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    3.674751] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    3.674775] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[    3.674810] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    3.674826] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[    3.674863] [drm:intel_dump_pipe_config [i915]] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa
>[    3.674899] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080
>[    3.674936] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[    3.674972] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.675007] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    3.675044] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d
>[    3.675080] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    3.675120] [drm:intel_dump_pipe_config [i915]] [PLANE:25:plane 1A] FB:73, fb = 1920x1080 format = XR24 little-endian (0x34325258)
>[    3.675157] [drm:intel_dump_pipe_config [i915]] 	scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080
>[    3.675192] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1
>[    3.675228] [drm:intel_dump_pipe_config [i915]] [PLANE:29:plane 3A] disabled, scaler_id = -1
>[    3.675264] [drm:intel_dump_pipe_config [i915]] [PLANE:31:cursor A] disabled, scaler_id = -1
>[    3.675300] [drm:intel_atomic_check [i915]] [CONNECTOR:66:DP-2] checking for sink bpp constrains
>[    3.675336] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
>[    3.675374] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 270000 pixel clock 154000KHz
>[    3.675414] [drm:intel_dp_compute_config [i915]] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24
>[    3.675448] [drm:intel_dp_compute_config [i915]] DP link bw required 462000 available 648000
>[    3.675485] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[    3.675522] [drm:intel_dump_pipe_config [i915]] [CRTC:42:pipe B][modeset]
>[    3.675558] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0
>[    3.675594] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 5980766, gmch_n: 8388608, link_m: 249198, link_n: 262144, tu: 64
>[    3.675630] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    3.675665] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    3.675682] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    3.675717] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    3.675733] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    3.675770] [drm:intel_dump_pipe_config [i915]] crtc timings: 154000 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x48 flags: 0x9
>[    3.675806] [drm:intel_dump_pipe_config [i915]] port clock: 162000, pipe src size: 1920x1200
>[    3.675841] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0
>[    3.675877] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.675932] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    3.675968] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d
>[    3.676004] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    3.676040] [drm:intel_dump_pipe_config [i915]] [PLANE:34:plane 1B] FB:73, fb = 1920x1080 format = XR24 little-endian (0x34325258)
>[    3.676077] [drm:intel_dump_pipe_config [i915]] 	scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080
>[    3.676112] [drm:intel_dump_pipe_config [i915]] [PLANE:36:plane 2B] disabled, scaler_id = -1
>[    3.676148] [drm:intel_dump_pipe_config [i915]] [PLANE:38:plane 3B] disabled, scaler_id = -1
>[    3.676183] [drm:intel_dump_pipe_config [i915]] [PLANE:40:cursor B] disabled, scaler_id = -1
>[    3.676223] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 288000, actual 288000
>[    3.676285] [drm:bxt_get_dpll [i915]] [CRTC:33:pipe A] using pre-allocated PORT PLL A
>[    3.676321] [drm:intel_reference_shared_dpll [i915]] using PORT PLL A for pipe A
>[    3.676359] [drm:bxt_get_dpll [i915]] [CRTC:42:pipe B] using pre-allocated PORT PLL C
>[    3.676533] [drm:intel_reference_shared_dpll [i915]] using PORT PLL C for pipe B
>[    3.676571] [drm:skl_update_scaler [i915]] scaler_user index 1.31: Staged freeing scaler id 0 scaler_users = 0x0
>[    3.676644] [drm:intel_edp_backlight_off.part.28 [i915]] 
>[    3.685354] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a
>[    3.685355] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    3.700539] usbcore: registered new interface driver usbhid
>[    3.700540] usbhid: USB HID core driver
>[    3.706694] mmc1: new HS400 MMC card at address 0001
>[    3.706709] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4:1.0/0003:045E:0780.0001/input/input5
>[    3.710678] mmcblk1: mmc1:0001 CGND3R 58.2 GiB 
>[    3.710813] mmcblk1boot0: mmc1:0001 CGND3R partition 1 4.00 MiB
>[    3.710938] mmcblk1boot1: mmc1:0001 CGND3R partition 2 4.00 MiB
>[    3.711068] mmcblk1rpmb: mmc1:0001 CGND3R partition 3 4.00 MiB
>[    3.714442]  mmcblk1: p1 p2 p3 p4
>[    3.717226] random: fast init done
>[    3.764122] hid-generic 0003:045E:0780.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:15.0-4/input0
>[    3.765362] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:15.0/usb1/1-4/1-4:1.1/0003:045E:0780.0002/input/input6
>[    3.826053] hid-generic 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:15.0-4/input1
>[    3.843942] tsc: Refined TSC clocksource calibration: 1094.400 MHz
>[    3.843961] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
>[    3.883977] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[    3.884039] [drm:intel_disable_pipe [i915]] disabling pipe A
>[    3.901090] [drm:edp_panel_off [i915]] Turn eDP port A panel power off
>[    3.901132] [drm:edp_panel_off [i915]] Wait for panel power off time
>[    3.901173] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000060
>[    3.952142] [drm:wait_panel_status [i915]] Wait complete
>[    3.952183] [drm:intel_disable_shared_dpll [i915]] disable PORT PLL A (active 1, on? 1) for crtc 33
>[    3.952237] [drm:intel_disable_shared_dpll [i915]] disabling PORT PLL A
>[    3.952297] [drm:intel_disable_pipe [i915]] disabling pipe B
>[    3.954106] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010
>[    3.954142] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[    3.954179] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
>[    3.954227] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[    3.954541] [drm:intel_disable_shared_dpll [i915]] disable PORT PLL C (active 2, on? 1) for crtc 42
>[    3.954591] [drm:intel_disable_shared_dpll [i915]] disabling PORT PLL C
>[    3.954636] [drm:bxt_set_cdclk [i915]] Changing CDCLK to 288000 kHz (VCO 1152000 kHz)
>[    3.960940] [drm:intel_update_cdclk [i915]] Current CD clock rate: 288000 kHz, VCO: 1152000 kHz, ref: 19200 kHz
>[    3.961028] [drm:intel_atomic_commit_tail [i915]] [ENCODER:50:DDI A]
>[    3.961066] [drm:intel_atomic_commit_tail [i915]] [ENCODER:58:DDI B]
>[    3.961104] [drm:intel_atomic_commit_tail [i915]] [ENCODER:60:DP-MST A]
>[    3.961139] [drm:intel_atomic_commit_tail [i915]] [ENCODER:61:DP-MST B]
>[    3.961175] [drm:intel_atomic_commit_tail [i915]] [ENCODER:62:DP-MST C]
>[    3.961210] [drm:intel_atomic_commit_tail [i915]] [ENCODER:65:DDI C]
>[    3.961246] [drm:intel_atomic_commit_tail [i915]] [ENCODER:67:DP-MST A]
>[    3.961281] [drm:intel_atomic_commit_tail [i915]] [ENCODER:68:DP-MST B]
>[    3.961316] [drm:intel_atomic_commit_tail [i915]] [ENCODER:69:DP-MST C]
>[    3.961356] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL A
>[    3.961392] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL B
>[    3.961429] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL C
>[    3.961482] [drm:intel_enable_shared_dpll [i915]] enable PORT PLL A (active 1, on? 0) for crtc 33
>[    3.961517] [drm:intel_enable_shared_dpll [i915]] enabling PORT PLL A
>[    3.961654] [drm:edp_panel_on [i915]] Turn eDP port A panel power on
>[    3.961690] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
>[    4.027961] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    4.030993] ata1.00: ATA-10: INTEL SSDSC2BW120H6, RG20, max UDMA/133
>[    4.030995] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    4.044251] ata1.00: configured for UDMA/133
>[    4.044636] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2BW12 RG20 PQ: 0 ANSI: 5
>[    4.076226] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
>[    4.076273] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    4.076285] sd 0:0:0:0: [sda] Write Protect is off
>[    4.076287] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    4.076306] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    4.077494]  sda: sda1 sda2 sda3
>[    4.077918] sd 0:0:0:0: [sda] Attached SCSI disk
>[    4.416073] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 08000001 control 00000060
>[    4.463352] [drm:wait_panel_status [i915]] Wait complete
>[    4.463449] [drm:edp_panel_on [i915]] Wait for panel power on
>[    4.463486] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000063
>[    4.570879] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010
>[    4.570916] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[    4.570953] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1
>[    4.571019] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[    4.664238] [drm:wait_panel_status [i915]] Wait complete
>[    4.664332] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[    4.664371] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
>[    4.665502] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[    4.665538] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[    4.665575] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[    4.666227] [drm:intel_dp_start_link_train [i915]] clock recovery OK
>[    4.666262] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
>[    4.667210] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
>[    4.667407] [drm:skylake_pfit_enable [i915]] for crtc_state = ffff9cf3e5fd1800
>[    4.667589] [drm:intel_enable_pipe [i915]] enabling pipe A
>[    4.667645] [drm:intel_edp_backlight_on.part.27 [i915]] 
>[    4.667682] [drm:intel_panel_enable_backlight [i915]] pipe A
>[    4.667721] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 96000
>[    4.675956] [drm:intel_psr_enable [i915]] PSR not supported on this platform
>[    4.675992] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS
>[    4.684515] [drm:intel_enable_shared_dpll [i915]] enable PORT PLL C (active 2, on? 0) for crtc 42
>[    4.684550] [drm:intel_enable_shared_dpll [i915]] enabling PORT PLL C
>[    4.685771] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[    4.685805] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[    4.685841] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[    4.686515] [drm:intel_dp_start_link_train [i915]] clock recovery OK
>[    4.686549] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
>[    4.687522] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
>[    4.689807] [drm:skylake_pfit_enable [i915]] for crtc_state = ffff9cf3e5fd2000
>[    4.689986] [drm:intel_enable_pipe [i915]] enabling pipe B
>[    4.723605] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:51:eDP-1]
>[    4.723647] [drm:intel_atomic_commit_tail [i915]] [CRTC:33:pipe A]
>[    4.723841] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL A
>[    4.723946] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:66:DP-2]
>[    4.723985] [drm:intel_atomic_commit_tail [i915]] [CRTC:42:pipe B]
>[    4.724057] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL C
>[    4.724100] Console: switching to colour frame buffer device 240x67
>[    4.747242] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    4.822205] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    4.868030] clocksource: Switched to clocksource tsc
>[    4.896133] [drm] RC6 on
>[    4.960500] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
>[    4.960734] systemd[1]: Detected architecture x86-64.
>[    4.961022] systemd[1]: Set hostname to <BXT-2-NOTEBOOK>.
>[    5.035957] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    5.036080] systemd[1]: Reached target Encrypted Volumes.
>[    5.036224] systemd[1]: Created slice User and Session Slice.
>[    5.036320] systemd[1]: Created slice System Slice.
>[    5.036598] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    5.036716] systemd[1]: Created slice system-systemd\x2dfsck.slice.
>[    5.036766] systemd[1]: Listening on fsck to fsckd communication Socket.
>[    5.057614] lp: driver loaded but no devices found
>[    5.061789] ppdev: user-space parallel port driver
>[    5.148853] EXT4-fs (sda2): re-mounted. Opts: (null)
>[    5.162727] systemd-journald[242]: Received request to flush runtime journal from PID 1
>[    5.364228] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    5.376435] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=28800/96000
>[    5.376462] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 28800
>[    5.404411] idma64 idma64.0: Found Intel integrated DMA 64-bit
>[    5.404909] idma64 idma64.1: Found Intel integrated DMA 64-bit
>[    5.405719] idma64 idma64.2: Found Intel integrated DMA 64-bit
>[    5.406147] idma64 idma64.3: Found Intel integrated DMA 64-bit
>[    5.406440] idma64 idma64.4: Found Intel integrated DMA 64-bit
>[    5.406790] idma64 idma64.5: Found Intel integrated DMA 64-bit
>[    5.407278] idma64 idma64.6: Found Intel integrated DMA 64-bit
>[    5.407628] idma64 idma64.7: Found Intel integrated DMA 64-bit
>[    5.409144] idma64 idma64.8: Found Intel integrated DMA 64-bit
>[    5.409928] idma64 idma64.9: Found Intel integrated DMA 64-bit
>[    5.410875] idma64 idma64.12: Found Intel integrated DMA 64-bit
>[    5.411264] idma64 idma64.13: Found Intel integrated DMA 64-bit
>[    5.411619] idma64 idma64.14: Found Intel integrated DMA 64-bit
>[    5.422953] Intel(R) Wireless WiFi driver for Linux
>[    5.422955] Copyright(c) 2003- 2015 Intel Corporation
>[    5.423569] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
>[    5.429670] Bluetooth: Core ver 2.22
>[    5.429687] NET: Registered protocol family 31
>[    5.429688] Bluetooth: HCI device and connection manager initialized
>[    5.429693] Bluetooth: HCI socket layer initialized
>[    5.429696] Bluetooth: L2CAP socket layer initialized
>[    5.429702] Bluetooth: SCO socket layer initialized
>[    5.454566] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2
>[    5.454740] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2
>[    5.454760] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
>[    5.454776] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
>[    5.454789] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-22.ucode failed with error -2
>[    5.454936] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-21.ucode failed with error -2
>[    5.454952] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-20.ucode failed with error -2
>[    5.454966] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-19.ucode failed with error -2
>[    5.454978] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-18.ucode failed with error -2
>[    5.455086] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-17.ucode failed with error -2
>[    5.455090] iwlwifi 0000:02:00.0: no suitable firmware found!
>[    5.480143] usbcore: registered new interface driver btusb
>[    5.483258] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[    5.500833] Bluetooth: hci0: read Intel version: 370810011003110e00
>[    5.506468] Adding 8268796k swap on /dev/sda3.  Priority:-1 extents:1 across:8268796k SSFS
>[    5.506898] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
>[    5.534045] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[    5.534049] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    5.534051] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[    5.534052] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[    5.534054] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[    5.534056] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
>[    5.543318] SSE version of gcm_enc/dec engaged.
>[    5.594835] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    5.594864] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    5.594890] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[    5.597529] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/sound/card0/input7
>[    5.597609] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
>[    5.597703] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input9
>[    5.597795] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input10
>[    5.597880] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input11
>[    5.756838] intel_telemetry_core Init
>[    5.764624] intel_telemetry: version 1.0.0 loaded
>[    5.774638] audit: type=1400 audit(1478695476.293:2): apparmor="STATUS" operation="profile_load" name="/usr/bin/ubuntu-core-launcher" pid=606 comm="apparmor_parser"
>[    5.777270] intel_rapl: Found RAPL domain package
>[    5.777275] intel_rapl: Found RAPL domain core
>[    5.777278] intel_rapl: Found RAPL domain uncore
>[    5.777282] intel_rapl: Found RAPL domain dram
>[    5.778858] audit: type=1400 audit(1478695476.297:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=601 comm="apparmor_parser"
>[    5.778866] audit: type=1400 audit(1478695476.297:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=601 comm="apparmor_parser"
>[    5.780877] audit: type=1400 audit(1478695476.301:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=609 comm="apparmor_parser"
>[    5.783058] audit: type=1400 audit(1478695476.301:6): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=602 comm="apparmor_parser"
>[    5.783066] audit: type=1400 audit(1478695476.301:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=602 comm="apparmor_parser"
>[    5.783071] audit: type=1400 audit(1478695476.301:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=602 comm="apparmor_parser"
>[    5.783079] audit: type=1400 audit(1478695476.301:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=602 comm="apparmor_parser"
>[    5.784760] audit: type=1400 audit(1478695476.305:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=610 comm="apparmor_parser"
>[    5.875900] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
>[    5.894695] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[    5.950074] dw-apb-uart.8: ttyS4 at MMIO 0x9232c000 (irq = 4, base_baud = 115200) is a 16550A
>[    6.062954] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[    6.062957] Bluetooth: BNEP filters: protocol multicast
>[    6.062963] Bluetooth: BNEP socket layer initialized
>[    6.080537] dw-apb-uart.9: ttyS5 at MMIO 0x9232e000 (irq = 5, base_baud = 115200) is a 16550A
>[    6.208174] dw-apb-uart.10: ttyS6 at MMIO 0x92330000 (irq = 6, base_baud = 115200) is a 16550A
>[    6.336230] dw-apb-uart.11: ttyS7 at MMIO 0x92332000 (irq = 7, base_baud = 115200) is a 16550A
>[    6.403390] [drm:drm_mode_addfb2 [drm]] [FB:71]
>[    6.403779] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer
>[    6.403825] [drm:drm_mode_addfb2 [drm]] [FB:71]
>[    6.403852] [drm:drm_mode_addfb2 [drm]] [FB:71]
>[    6.463684] [drm:drm_mode_addfb2 [drm]] [FB:71]
>[    6.543679] [drm:drm_mode_setcrtc [drm]] [CRTC:33:pipe A]
>[    6.543702] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:51:eDP-1]
>[    6.551398] [drm:drm_mode_setcrtc [drm]] [CRTC:42:pipe B]
>[    6.551418] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:66:DP-2]
>[    6.766337] [drm:drm_mode_addfb2 [drm]] [FB:73]
>[    6.885426] random: crng init done
>[    7.199961] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
>[    7.199991] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
>[    7.363919] i2c_designware i2c_designware.3: controller timed out
>[    7.363949] i2c_hid i2c-ELAN221D:00: hid_descr_cmd failed
>[    7.515429] i2c_hid i2c-ALPS0001:00: hid_descr_cmd failed
>[    8.089950] [drm:drm_mode_addfb2 [drm]] [FB:90]
>[    8.135008] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:51:eDP-1]
>[    8.135048] [drm:intel_dp_detect [i915]] [CONNECTOR:51:eDP-1]
>[    8.135096] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[    8.135124] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    8.135150] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    8.135176] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    8.135206] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[    8.135235] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
>[    8.135655] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID b\006UA\021\001 HW-rev 10.0 SW-rev 1.8
>[    8.136023] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    8.136038] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:51:eDP-1] probed modes :
>[    8.136056] [drm:drm_mode_debug_printmodeline [drm]] Modeline 52:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[    8.136405] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1]
>[    8.136443] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[    8.136457] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:59:DP-1] disconnected
>[    8.136472] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:DP-2]
>[    8.136499] [drm:intel_dp_detect [i915]] [CONNECTOR:66:DP-2]
>[    8.136951] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 84 01 01 00 01 00 02 02 06 05 00 00 00
>[    8.137271] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[    8.137300] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[    8.137325] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[    8.137351] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[    8.137762] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-00-00(NS) dev-ID  HW-rev 0.0 SW-rev 0.0
>[    8.137789] [drm:intel_dp_detect [i915]] Sink is not MST capable
>[    8.138177] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    8.138197] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:66:DP-2] probed modes :
>[    8.138215] [drm:drm_mode_debug_printmodeline [drm]] Modeline 75:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[    8.138232] [drm:drm_mode_debug_printmodeline [drm]] Modeline 79:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0xa
>[    8.138248] [drm:drm_mode_debug_printmodeline [drm]] Modeline 82:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    8.138264] [drm:drm_mode_debug_printmodeline [drm]] Modeline 76:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
>[    8.138293] [drm:drm_mode_debug_printmodeline [drm]] Modeline 80:"1600x900" 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
>[    8.138310] [drm:drm_mode_debug_printmodeline [drm]] Modeline 83:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    8.138326] [drm:drm_mode_debug_printmodeline [drm]] Modeline 77:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
>[    8.138343] [drm:drm_mode_debug_printmodeline [drm]] Modeline 78:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x6
>[    8.138359] [drm:drm_mode_debug_printmodeline [drm]] Modeline 81:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    8.138376] [drm:drm_mode_debug_printmodeline [drm]] Modeline 86:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    8.138393] [drm:drm_mode_debug_printmodeline [drm]] Modeline 84:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    8.138409] [drm:drm_mode_debug_printmodeline [drm]] Modeline 85:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    8.138510] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-1]
>[    8.138546] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-1]
>[    8.138736] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    8.138762] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    8.138929] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    8.138953] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    8.139127] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    8.139152] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    8.139322] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    8.139335] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    8.139343] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:63:HDMI-A-1] disconnected
>[    8.139373] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:HDMI-A-2]
>[    8.139402] [drm:intel_hdmi_detect [i915]] [CONNECTOR:70:HDMI-A-2]
>[    8.139615] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    8.139640] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    8.139810] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    8.139833] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    8.140328] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    8.140355] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    8.140547] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    8.140564] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    8.140574] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:70:HDMI-A-2] disconnected
>[    8.480924] [drm:drm_mode_addfb2 [drm]] [FB:53]
>[    8.481311] [drm:drm_mode_setcrtc [drm]] [CRTC:33:pipe A]
>[    8.481334] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:51:eDP-1]
>[    8.484996] [drm:drm_mode_setcrtc [drm]] [CRTC:42:pipe B]
>[    8.485021] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:66:DP-2]
>[    8.510045] [drm:drm_mode_setcrtc [drm]] [CRTC:42:pipe B]
>[    8.510065] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:66:DP-2]
>[    8.553358] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    8.553390] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    8.553417] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[    8.554714] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    8.568715] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    8.571796] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    8.588309] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    8.591495] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    8.602130] [drm:drm_mode_addfb2 [drm]] [FB:71]
>[    8.604487] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port B
>[    8.607623] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    8.620506] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    8.623650] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    8.636310] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    8.639149] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    8.652332] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port C
>[    8.655230] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[    8.668995] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[    8.671900] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[    8.688315] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[    8.691646] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[    8.708270] [drm:i915_audio_component_sync_audio_rate [i915]] Not valid for port D
>[    8.839933] Bluetooth: RFCOMM TTY layer initialized
>[    8.839944] Bluetooth: RFCOMM socket layer initialized
>[    8.839954] Bluetooth: RFCOMM ver 1.11
>[    8.896621] igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
>[    9.005166] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
>[   10.783943] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
>[   10.783973] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
>[   11.228454] [drm:drm_mode_addfb2 [drm]] [FB:93]
>[   70.699817] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=28800/96000
>[   70.699866] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 28800
>[  199.494818] PM: Syncing filesystems ... 
>[  199.504787] done.
>[  199.504789] Freezing user space processes ... (elapsed 0.003 seconds) done.
>[  199.508393] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[  199.508395] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
>[  199.508396] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
>[  199.508399] PM: Marking nosave pages: [mem 0x0f000000-0x12151fff]
>[  199.508590] PM: Marking nosave pages: [mem 0x77f06000-0x79d55fff]
>[  199.508707] PM: Marking nosave pages: [mem 0x7ac27000-0x7ac51fff]
>[  199.508709] PM: Marking nosave pages: [mem 0x7b000000-0xffffffff]
>[  199.510548] PM: Basic memory bitmaps created
>[  199.510587] PM: Preallocating image memory... 
>[  200.333374] hpet_rtc_timer_reinit: 36 callbacks suppressed
>[  200.333376] hpet1: lost 7161 rtc interrupts
>[  201.233052] hpet1: lost 7161 rtc interrupts
>[  202.133502] hpet1: lost 7160 rtc interrupts
>[  202.212861] done (allocated 456392 pages)
>[  202.212973] PM: Allocated 1825568 kbytes in 2.70 seconds (676.13 MB/s)
>[  202.213090] Freezing remaining freezable tasks ... (elapsed 0.012 seconds) done.
>[  203.040234] hpet1: lost 7161 rtc interrupts
>[  203.948371] hpet1: lost 7161 rtc interrupts
>[  204.756355] Suspending console(s) (use no_console_suspend to debug)
>[  204.846714] hpet1: lost 7161 rtc interrupts
>[  204.847396] [drm] INTEL_GUC_SEND: Action 0x501 failed; ret=-110 status=0x00000501 response=0x00000000
>[  204.853935] igb 0000:01:00.0: System wakeup enabled by ACPI
>[  204.869566] [drm:intel_atomic_check [i915]] [CONNECTOR:51:eDP-1] checking for sink bpp constrains
>[  204.869698] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
>[  204.869947] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz
>[  204.870195] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24
>[  204.870324] [drm:intel_dp_compute_config [i915]] DP link bw required 414360 available 540000
>[  204.870568] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[  204.870813] [drm:intel_dump_pipe_config [i915]] [CRTC:33:pipe A][modeset]
>[  204.870953] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[  204.871091] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64
>[  204.871223] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  204.871359] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  204.871491] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x0 0xa
>[  204.871631] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  204.871752] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[  204.871893] [drm:intel_dump_pipe_config [i915]] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa
>[  204.872063] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080
>[  204.872197] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[  204.872330] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  204.872462] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  204.872595] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d
>[  204.872727] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  204.872860] [drm:intel_dump_pipe_config [i915]] [PLANE:25:plane 1A] FB:53, fb = 3840x1200 format = XR24 little-endian (0x34325258)
>[  204.872996] [drm:intel_dump_pipe_config [i915]] 	scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080
>[  204.873131] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1
>[  204.873271] [drm:intel_dump_pipe_config [i915]] [PLANE:29:plane 3A] disabled, scaler_id = -1
>[  204.873403] [drm:intel_dump_pipe_config [i915]] [PLANE:31:cursor A] disabled, scaler_id = -1
>[  204.873537] [drm:intel_atomic_check [i915]] [CONNECTOR:66:DP-2] checking for sink bpp constrains
>[  204.873670] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
>[  204.873801] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 270000 pixel clock 154000KHz
>[  204.873935] [drm:intel_dp_compute_config [i915]] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24
>[  204.874064] [drm:intel_dp_compute_config [i915]] DP link bw required 462000 available 648000
>[  204.874197] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[  204.874337] [drm:intel_dump_pipe_config [i915]] [CRTC:42:pipe B][modeset]
>[  204.874467] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0
>[  204.874605] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 5980766, gmch_n: 8388608, link_m: 249198, link_n: 262144, tu: 64
>[  204.874740] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  204.874869] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  204.874991] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x0 0x9
>[  204.875121] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  204.875243] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
>[  204.875376] [drm:intel_dump_pipe_config [i915]] crtc timings: 154000 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x48 flags: 0x9
>[  204.875511] [drm:intel_dump_pipe_config [i915]] port clock: 162000, pipe src size: 1920x1200
>[  204.875643] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[  204.875777] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  204.875912] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  204.876045] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x8200, ebb4: 0x2000,pll0: 0x20, pll1: 0x100, pll2: 0x19999a, pll3: 0x10000, pll6: 0x30904, pll8: 0x8, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d
>[  204.876183] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  204.876314] [drm:intel_dump_pipe_config [i915]] [PLANE:34:plane 1B] FB:53, fb = 3840x1200 format = XR24 little-endian (0x34325258)
>[  204.876451] [drm:intel_dump_pipe_config [i915]] 	scaler:-1 src 1920x0+1920+1200 dst 0x0+1920+1200
>[  204.876582] [drm:intel_dump_pipe_config [i915]] [PLANE:36:plane 2B] disabled, scaler_id = -1
>[  204.876712] [drm:intel_dump_pipe_config [i915]] [PLANE:38:plane 3B] disabled, scaler_id = -1
>[  204.876853] [drm:intel_dump_pipe_config [i915]] [PLANE:40:cursor B] disabled, scaler_id = -1
>[  204.877101] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 288000, actual 144000
>[  204.877461] [drm:bxt_get_dpll [i915]] [CRTC:33:pipe A] using pre-allocated PORT PLL A
>[  204.877598] [drm:intel_reference_shared_dpll [i915]] using PORT PLL A for pipe A
>[  204.877731] [drm:bxt_get_dpll [i915]] [CRTC:42:pipe B] using pre-allocated PORT PLL C
>[  204.877864] [drm:intel_reference_shared_dpll [i915]] using PORT PLL C for pipe B
>[  204.878583] [drm:intel_edp_backlight_off.part.28 [i915]] 
>[  204.990857] ACPI : EC: event blocked
>[  205.084371] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[  205.084734] [drm:intel_disable_pipe [i915]] disabling pipe A
>[  205.100187] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[  205.100327] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
>[  205.100634] [drm:edp_panel_off [i915]] Turn eDP port A panel power off
>[  205.100664] [drm:edp_panel_off [i915]] Wait for panel power off time
>[  205.100693] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status 80000008 control 00000060
>[  205.150999] [drm:wait_panel_status [i915]] Wait complete
>[  205.151031] [drm:intel_disable_shared_dpll [i915]] disable PORT PLL A (active 1, on? 1) for crtc 33
>[  205.151075] [drm:intel_disable_shared_dpll [i915]] disabling PORT PLL A
>[  205.151135] [drm:intel_disable_pipe [i915]] disabling pipe B
>[  205.153632] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010
>[  205.153658] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[  205.153684] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 0
>[  205.153718] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[  205.157343] [drm:intel_disable_shared_dpll [i915]] disable PORT PLL C (active 2, on? 1) for crtc 42
>[  205.157385] [drm:intel_disable_shared_dpll [i915]] disabling PORT PLL C
>[  205.157424] [drm:bxt_set_cdclk [i915]] Changing CDCLK to 144000 kHz (VCO 1152000 kHz)
>[  205.161493] [drm:intel_update_cdclk [i915]] Current CD clock rate: 144000 kHz, VCO: 1152000 kHz, ref: 19200 kHz
>[  205.161522] [drm:intel_atomic_commit_tail [i915]] [ENCODER:50:DDI A]
>[  205.161550] [drm:intel_atomic_commit_tail [i915]] [ENCODER:58:DDI B]
>[  205.161578] [drm:intel_atomic_commit_tail [i915]] [ENCODER:60:DP-MST A]
>[  205.161605] [drm:intel_atomic_commit_tail [i915]] [ENCODER:61:DP-MST B]
>[  205.161631] [drm:intel_atomic_commit_tail [i915]] [ENCODER:62:DP-MST C]
>[  205.161657] [drm:intel_atomic_commit_tail [i915]] [ENCODER:65:DDI C]
>[  205.161685] [drm:intel_atomic_commit_tail [i915]] [ENCODER:67:DP-MST A]
>[  205.161713] [drm:intel_atomic_commit_tail [i915]] [ENCODER:68:DP-MST B]
>[  205.161740] [drm:intel_atomic_commit_tail [i915]] [ENCODER:69:DP-MST C]
>[  205.161770] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL A
>[  205.161797] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL B
>[  205.161823] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL C
>[  205.161857] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:51:eDP-1]
>[  205.161888] [drm:intel_atomic_commit_tail [i915]] [CRTC:33:pipe A]
>[  205.161918] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL A
>[  205.161945] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:66:DP-2]
>[  205.161973] [drm:intel_atomic_commit_tail [i915]] [CRTC:42:pipe B]
>[  205.162002] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL C
>[  205.264079] PM: freeze of devices complete after 507.719 msecs
>[  205.353157] [drm:intel_power_well_disable [i915]] disabling dpio-common-bc
>[  205.353182] [drm:intel_power_well_disable [i915]] disabling dpio-common-a
>[  205.353206] [drm:intel_power_well_disable [i915]] disabling power well 2
>[  205.353236] [drm:skl_set_power_well [i915]] Disabling power well 2
>[  205.353260] [drm:intel_power_well_disable [i915]] disabling DC off
>[  205.353288] [drm:gen9_enable_dc5 [i915]] Enabling DC5
>[  205.353314] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 01
>[  205.353339] [drm:intel_power_well_disable [i915]] disabling always-on
>[  205.353842] [drm:gen9_set_dc_state [i915]] Setting DC state from 01 to 00
>[  205.353884] [drm:bxt_set_cdclk [i915]] Changing CDCLK to 19200 kHz (VCO 0 kHz)
>[  205.357952] [drm:intel_update_cdclk [i915]] Current CD clock rate: 19200 kHz, VCO: 0 kHz, ref: 19200 kHz
>[  205.357974] [drm:intel_power_well_disable [i915]] disabling power well 1
>[  205.358002] [drm:skl_set_power_well [i915]] Disabling power well 1
>[  205.358029] [drm:skl_set_power_well [i915]] Clearing auxiliary requests for power well 1 forced on by DMC
>[  205.358058] [drm:bxt_enable_dc9 [i915]] Enabling DC9
>[  205.358085] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 08
>[  205.376323] PM: late freeze of devices complete after 112.128 msecs
>[  205.377579] ACPI : EC: interrupt blocked
>[  205.400116] PM: noirq freeze of devices complete after 23.679 msecs
>[  205.400326] ACPI: Preparing to enter system sleep state S4
>[  205.401186] ACPI : EC: EC stopped
>[  205.401187] PM: Saving platform NVS memory
>[  205.401783] Disabling non-boot CPUs ...
>[  205.402599] Broke affinity for irq 122
>[  205.402649] Cannot set affinity for irq 351
>[  205.402654] Broke affinity for irq 368
>[  205.403703] smpboot: CPU 1 is now offline
>[  205.417398] Broke affinity for irq 122
>[  205.417453] Broke affinity for irq 368
>[  205.417456] Broke affinity for irq 374
>[  205.418502] smpboot: CPU 2 is now offline
>[  205.441436] Broke affinity for irq 8
>[  205.441445] Broke affinity for irq 9
>[  205.441583] Broke affinity for irq 122
>[  205.441650] Broke affinity for irq 368
>[  205.441654] Broke affinity for irq 374
>[  205.442726] smpboot: CPU 3 is now offline
>[  205.462487] PM: Creating hibernation image:
>[  206.604035] PM: Need to copy 454985 pages
>[  206.604043] PM: Normal pages needed: 454985 + 1024, available pages: 3698001
>[  205.462862] PM: Restoring platform NVS memory
>[  205.462979] ACPI : EC: EC started
>[  205.463876] Suspended for 95.013 seconds
>[  205.464019] Enabling non-boot CPUs ...
>[  205.474962] x86: Booting SMP configuration:
>[  205.474964] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[  205.477703]  cache: parent cpu1 should not be sleeping
>[  205.478516] CPU1 is up
>[  205.491107] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[  205.493949]  cache: parent cpu2 should not be sleeping
>[  205.495079] CPU2 is up
>[  205.511205] smpboot: Booting Node 0 Processor 3 APIC 0x6
>[  205.514192]  cache: parent cpu3 should not be sleeping
>[  205.515291] CPU3 is up
>[  205.518528] ACPI: Waking up from system sleep state S4
>[  205.527356] ACPI : button: The lid device is not compliant to SW_LID.
>[  205.528817] acpi LNXPOWER:14: Turning OFF
>[  205.530379] ACPI : EC: interrupt unblocked
>[  205.575025] PM: noirq restore of devices complete after 44.836 msecs
>[  205.575380] [drm:gen9_sanitize_dc_state [i915]] Resetting DC state tracking from 08 to 08
>[  205.575421] [drm:bxt_disable_dc9 [i915]] Disabling DC9
>[  205.575461] [drm:gen9_set_dc_state [i915]] Setting DC state from 08 to 00
>[  205.575517] [drm:sanitize_rc6_option [i915]] BIOS enabled RC states: HW_CTRL on HW_RC6 on SW_TARGET_STATE 0
>[  205.575727] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[  205.575775] [drm:intel_power_well_enable [i915]] enabling power well 1
>[  205.575819] [drm:skl_set_power_well [i915]] Enabling power well 1
>[  205.575871] [drm:intel_update_cdclk [i915]] Current CD clock rate: 19200 kHz, VCO: 0 kHz, ref: 19200 kHz
>[  205.575916] [drm:bxt_init_cdclk [i915]] Sanitizing cdclk programmed by pre-os
>[  205.575962] [drm:bxt_set_cdclk [i915]] Changing CDCLK to 144000 kHz (VCO 1152000 kHz)
>[  205.582124] [drm:intel_update_cdclk [i915]] Current CD clock rate: 144000 kHz, VCO: 1152000 kHz, ref: 19200 kHz
>[  205.582496] [drm:intel_power_well_enable [i915]] enabling always-on
>[  205.582534] [drm:intel_power_well_enable [i915]] enabling DC off
>[  205.582574] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[  205.582618] [drm:intel_power_well_enable [i915]] enabling power well 2
>[  205.582676] [drm:skl_set_power_well [i915]] Enabling power well 2
>[  205.582724] [drm:intel_power_well_enable [i915]] enabling dpio-common-a
>[  205.582834] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
>[  205.582959] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[  205.583065] [drm:_bxt_ddi_phy_init [i915]] DDI PHY 1 already enabled, won't reprogram it
>[  205.583150] [drm:_bxt_ddi_phy_init [i915]] DDI PHY 0 already enabled, won't reprogram it
>[  205.583296] PM: early restore of devices complete after 8.059 msecs
>[  205.712582] ACPI : EC: event unblocked
>[  205.712726] usb usb1: root hub lost power or was reset
>[  205.712728] usb usb2: root hub lost power or was reset
>[  205.713919] igb 0000:01:00.0: System wakeup disabled by ACPI
>[  205.714680] rtc_cmos 00:04: System wakeup disabled by ACPI
>[  205.716124] sd 0:0:0:0: [sda] Starting disk
>[  205.716680] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x79cff018
>[  205.716736] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[  205.716760] [drm:intel_opregion_setup [i915]] ASLE supported
>[  205.716788] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[  205.716856] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
>[  205.716883] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
>[  205.717002] [drm:gen8_init_common_ring [i915]] Execlists enabled for render ring
>[  205.717125] [drm:gen8_init_common_ring [i915]] Execlists enabled for blitter ring
>[  205.717228] [drm:gen8_init_common_ring [i915]] Execlists enabled for bsd ring
>[  205.717332] [drm:gen8_init_common_ring [i915]] Execlists enabled for video enhancement ring
>[  205.717367] [drm:intel_guc_setup [i915]] GuC fw status: path i915/bxt_guc_ver8_7.bin, fetch SUCCESS, load SUCCESS
>[  205.717420] [drm:intel_guc_setup [i915]] GuC fw status: fetch SUCCESS, load PENDING
>[  205.717465] [drm:intel_huc_load [i915]] i915/bxt_huc_ver01_07_1398.bin fw status: fetch SUCCESS, load SUCCESS
>[  205.719536] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[  205.719684] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[  205.719713] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[  205.720884] [drm:intel_huc_load [i915]] HuC DMA transfer wait over with ret 0
>[  205.720911] [drm:intel_huc_load [i915]] i915/bxt_huc_ver01_07_1398.bin fw status: fetch SUCCESS, load SUCCESS
>[  205.731199] [drm:guc_ucode_xfer_dma [i915]] DMA status 0x10, GuC status 0x8002f0ec
>[  205.731226] [drm:guc_ucode_xfer_dma [i915]] returning 0
>[  205.731253] [drm:intel_guc_setup [i915]] GuC fw status: fetch SUCCESS, load SUCCESS
>[  205.751408] [drm] INTEL_GUC_SEND: Action 0x502 failed; ret=-110 status=0x00000502 response=0x40000000
>[  205.751439] [drm:intel_update_cdclk [i915]] Current CD clock rate: 144000 kHz, VCO: 1152000 kHz, ref: 19200 kHz
>[  205.751474] [drm:bxt_hpd_irq_setup [i915]] Invert bit setting: hp_ctl:18001818 hp_port:38
>[  205.751516] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:33:pipe A] hw state readout: disabled
>[  205.751545] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:42:pipe B] hw state readout: disabled
>[  205.751575] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:49:pipe C] hw state readout: disabled
>[  205.751604] [drm:intel_modeset_setup_hw_state [i915]] PORT PLL A hw state readout: crtc_mask 0x00000000, on 0
>[  205.751631] [drm:intel_modeset_setup_hw_state [i915]] PORT PLL B hw state readout: crtc_mask 0x00000000, on 0
>[  205.751658] [drm:intel_modeset_setup_hw_state [i915]] PORT PLL C hw state readout: crtc_mask 0x00000000, on 0
>[  205.751688] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:50:DDI A] hw state readout: disabled, pipe A
>[  205.751718] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:58:DDI B] hw state readout: disabled, pipe A
>[  205.751746] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:60:DP-MST A] hw state readout: disabled, pipe A
>[  205.751772] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:61:DP-MST B] hw state readout: disabled, pipe B
>[  205.751906] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:62:DP-MST C] hw state readout: disabled, pipe C
>[  205.751934] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:65:DDI C] hw state readout: disabled, pipe A
>[  205.751960] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:67:DP-MST A] hw state readout: disabled, pipe A
>[  205.751986] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:68:DP-MST B] hw state readout: disabled, pipe B
>[  205.752012] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:69:DP-MST C] hw state readout: disabled, pipe C
>[  205.752042] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:51:eDP-1] hw state readout: disabled
>[  205.752071] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:59:DP-1] hw state readout: disabled
>[  205.752100] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:63:HDMI-A-1] hw state readout: disabled
>[  205.752129] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:66:DP-2] hw state readout: disabled
>[  205.752157] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:70:HDMI-A-2] hw state readout: disabled
>[  205.752188] [drm:intel_dump_pipe_config [i915]] [CRTC:33:pipe A][setup_hw_state]
>[  205.752216] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 0, dithering: 0
>[  205.752241] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  205.752267] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  205.752291] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  205.752317] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  205.752332] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  205.752361] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  205.752387] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0
>[  205.752416] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: 0
>[  205.752442] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  205.752468] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  205.752497] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0
>[  205.752522] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  205.752553] [drm:intel_dump_pipe_config [i915]] [PLANE:25:plane 1A] FB:53, fb = 3840x1200 format = XR24 little-endian (0x34325258)
>[  205.752580] [drm:intel_dump_pipe_config [i915]] 	scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080
>[  205.752607] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1
>[  205.752635] [drm:intel_dump_pipe_config [i915]] [PLANE:29:plane 3A] disabled, scaler_id = -1
>[  205.752662] [drm:intel_dump_pipe_config [i915]] [PLANE:31:cursor A] disabled, scaler_id = -1
>[  205.752691] [drm:intel_dump_pipe_config [i915]] [CRTC:42:pipe B][setup_hw_state]
>[  205.752717] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[  205.752742] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  205.752768] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  205.752784] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  205.752809] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  205.752825] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  205.752851] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  205.752877] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0
>[  205.752903] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: 0
>[  205.752929] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  205.752955] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  205.752982] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0
>[  205.753007] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  205.753035] [drm:intel_dump_pipe_config [i915]] [PLANE:34:plane 1B] FB:53, fb = 3840x1200 format = XR24 little-endian (0x34325258)
>[  205.753062] [drm:intel_dump_pipe_config [i915]] 	scaler:-1 src 1920x0+1920+1200 dst 0x0+1920+1200
>[  205.753089] [drm:intel_dump_pipe_config [i915]] [PLANE:36:plane 2B] disabled, scaler_id = -1
>[  205.753116] [drm:intel_dump_pipe_config [i915]] [PLANE:38:plane 3B] disabled, scaler_id = -1
>[  205.753144] [drm:intel_dump_pipe_config [i915]] [PLANE:40:cursor B] disabled, scaler_id = -1
>[  205.753172] [drm:intel_dump_pipe_config [i915]] [CRTC:49:pipe C][setup_hw_state]
>[  205.753198] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[  205.753223] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  205.753249] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  205.753265] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  205.753290] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  205.753306] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  205.753333] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  205.753359] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0
>[  205.753385] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: 0
>[  205.753410] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  205.753441] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  205.753468] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x0, ebb4: 0x0,pll0: 0x0, pll1: 0x0, pll2: 0x0, pll3: 0x0, pll6: 0x0, pll8: 0x0, pll9: 0x0, pll10: 0x0, pcsdw12: 0x0
>[  205.753494] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  205.753521] [drm:intel_dump_pipe_config [i915]] [PLANE:43:plane 1C] disabled, scaler_id = -1
>[  205.753549] [drm:intel_dump_pipe_config [i915]] [PLANE:45:plane 2C] disabled, scaler_id = -1
>[  205.753576] [drm:intel_dump_pipe_config [i915]] [PLANE:47:cursor C] disabled, scaler_id = -1
>[  205.753648] [drm:intel_power_well_disable [i915]] disabling dpio-common-bc
>[  205.753674] [drm:intel_power_well_disable [i915]] disabling dpio-common-a
>[  205.753715] [drm:intel_atomic_check [i915]] [CONNECTOR:51:eDP-1] checking for sink bpp constrains
>[  205.753741] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
>[  205.753776] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 2 max bw 270000 pixel clock 138120KHz
>[  205.753806] [drm:intel_dp_compute_config [i915]] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 24
>[  205.753831] [drm:intel_dp_compute_config [i915]] DP link bw required 414360 available 540000
>[  205.753859] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[  205.753887] [drm:intel_dump_pipe_config [i915]] [CRTC:33:pipe A][modeset]
>[  205.753913] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[  205.753940] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 2; gmch_m: 6436858, gmch_n: 8388608, link_m: 268202, link_n: 524288, tu: 64
>[  205.753966] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  205.753992] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  205.754008] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x0 0xa
>[  205.754034] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  205.754050] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1920x1080" 60 138120 1920 1968 2018 2052 1080 1084 1086 1122 0x48 0xa
>[  205.754077] [drm:intel_dump_pipe_config [i915]] crtc timings: 138120 1920 1968 2018 2052 1080 1084 1086 1122, type: 0x48 flags: 0xa
>[  205.754102] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1920x1080
>[  205.754129] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[  205.754154] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  205.754180] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  205.754207] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x8100, ebb4: 0x2000,pll0: 0x1b, pll1: 0x100, pll2: 0x0, pll3: 0x0, pll6: 0x10803, pll8: 0x9, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d
>[  205.754233] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  205.754260] [drm:intel_dump_pipe_config [i915]] [PLANE:25:plane 1A] FB:53, fb = 3840x1200 format = XR24 little-endian (0x34325258)
>[  205.754286] [drm:intel_dump_pipe_config [i915]] 	scaler:-1 src 0x0+1920+1080 dst 0x0+1920+1080
>[  205.754312] [drm:intel_dump_pipe_config [i915]] [PLANE:27:plane 2A] disabled, scaler_id = -1
>[  205.754338] [drm:intel_dump_pipe_config [i915]] [PLANE:29:plane 3A] disabled, scaler_id = -1
>[  205.754364] [drm:intel_dump_pipe_config [i915]] [PLANE:31:cursor A] disabled, scaler_id = -1
>[  205.754391] [drm:intel_atomic_check [i915]] [CONNECTOR:66:DP-2] checking for sink bpp constrains
>[  205.754417] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to EDID reported max of 24
>[  205.754444] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max bw 270000 pixel clock 154000KHz
>[  205.754473] [drm:intel_dp_compute_config [i915]] DP link bw 06 rate select 00 lane count 4 clock 162000 bpp 24
>[  205.754498] [drm:intel_dp_compute_config [i915]] DP link bw required 462000 available 648000
>[  205.754524] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[  205.754550] [drm:intel_dump_pipe_config [i915]] [CRTC:42:pipe B][modeset]
>[  205.754576] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 24, dithering: 0
>[  205.754602] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 5980766, gmch_n: 8388608, link_m: 249198, link_n: 262144, tu: 64
>[  205.754669] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  205.754695] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  205.754711] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x0 0x9
>[  205.754736] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  205.754752] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x0 0x9
>[  205.754779] [drm:intel_dump_pipe_config [i915]] crtc timings: 154000 1920 1968 2000 2080 1200 1203 1209 1235, type: 0x0 flags: 0x9
>[  205.754805] [drm:intel_dump_pipe_config [i915]] port clock: 162000, pipe src size: 1920x1200
>[  205.754831] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[  205.754857] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  205.754883] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  205.754910] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ebb0: 0x8200, ebb4: 0x2000,pll0: 0x20, pll1: 0x100, pll2: 0x19999a, pll3: 0x10000, pll6: 0x30904, pll8: 0x8, pll9: 0xa, pll10: 0x8003c00, pcsdw12: 0x4d
>[  205.754936] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  205.754963] [drm:intel_dump_pipe_config [i915]] [PLANE:34:plane 1B] FB:53, fb = 3840x1200 format = XR24 little-endian (0x34325258)
>[  205.754989] [drm:intel_dump_pipe_config [i915]] 	scaler:-1 src 1920x0+1920+1200 dst 0x0+1920+1200
>[  205.755015] [drm:intel_dump_pipe_config [i915]] [PLANE:36:plane 2B] disabled, scaler_id = -1
>[  205.755041] [drm:intel_dump_pipe_config [i915]] [PLANE:38:plane 3B] disabled, scaler_id = -1
>[  205.755067] [drm:intel_dump_pipe_config [i915]] [PLANE:40:cursor B] disabled, scaler_id = -1
>[  205.755096] [drm:intel_atomic_check [i915]] New cdclk calculated to be atomic 288000, actual 288000
>[  205.755135] [drm:bxt_get_dpll [i915]] [CRTC:33:pipe A] using pre-allocated PORT PLL A
>[  205.755163] [drm:intel_reference_shared_dpll [i915]] using PORT PLL A for pipe A
>[  205.755192] [drm:bxt_get_dpll [i915]] [CRTC:42:pipe B] using pre-allocated PORT PLL C
>[  205.755218] [drm:intel_reference_shared_dpll [i915]] using PORT PLL C for pipe B
>[  205.755245] [drm:skl_update_scaler [i915]] scaler_user index 2.31: Staged freeing scaler id 0 scaler_users = 0x0
>[  205.755286] [drm:intel_power_well_enable [i915]] enabling dpio-common-a
>[  205.755376] [drm:intel_power_well_enable [i915]] enabling dpio-common-bc
>[  205.755486] [drm:bxt_set_cdclk [i915]] Changing CDCLK to 288000 kHz (VCO 1152000 kHz)
>[  205.759547] [drm:intel_update_cdclk [i915]] Current CD clock rate: 288000 kHz, VCO: 1152000 kHz, ref: 19200 kHz
>[  205.759575] [drm:intel_atomic_commit_tail [i915]] [ENCODER:50:DDI A]
>[  205.759601] [drm:intel_atomic_commit_tail [i915]] [ENCODER:58:DDI B]
>[  205.759629] [drm:intel_atomic_commit_tail [i915]] [ENCODER:60:DP-MST A]
>[  205.759655] [drm:intel_atomic_commit_tail [i915]] [ENCODER:61:DP-MST B]
>[  205.759681] [drm:intel_atomic_commit_tail [i915]] [ENCODER:62:DP-MST C]
>[  205.759707] [drm:intel_atomic_commit_tail [i915]] [ENCODER:65:DDI C]
>[  205.759733] [drm:intel_atomic_commit_tail [i915]] [ENCODER:67:DP-MST A]
>[  205.759759] [drm:intel_atomic_commit_tail [i915]] [ENCODER:68:DP-MST B]
>[  205.759785] [drm:intel_atomic_commit_tail [i915]] [ENCODER:69:DP-MST C]
>[  205.759815] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:59:DP-1]
>[  205.759842] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:63:HDMI-A-1]
>[  205.759868] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:70:HDMI-A-2]
>[  205.759895] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL A
>[  205.759922] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL B
>[  205.759948] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL C
>[  205.759990] [drm:intel_enable_shared_dpll [i915]] enable PORT PLL A (active 1, on? 0) for crtc 33
>[  205.760017] [drm:intel_enable_shared_dpll [i915]] enabling PORT PLL A
>[  205.760142] [drm:edp_panel_on [i915]] Turn eDP port A panel power on
>[  205.760169] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
>[  205.760197] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000060
>[  205.760224] [drm:wait_panel_status [i915]] Wait complete
>[  205.760250] [drm:edp_panel_on [i915]] Wait for panel power on
>[  205.760276] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 0000000a control 00000063
>[  205.867815] [drm:intel_get_hpd_pins [i915]] hotplug event received, stat 0x00000008, dig 0x1a001818, pins 0x00000010
>[  205.867842] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[  205.867869] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 1
>[  205.868123] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[  205.938621] atkbd serio0: Failed to deactivate keyboard on isa0060/serio0
>[  205.960741] [drm:wait_panel_status [i915]] Wait complete
>[  205.960773] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[  205.960801] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
>[  205.962015] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[  205.962041] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[  205.962069] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[  205.962892] [drm:intel_dp_start_link_train [i915]] clock recovery OK
>[  205.962918] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
>[  205.963906] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
>[  205.964131] [drm:skylake_pfit_enable [i915]] for crtc_state = ffff9cf3a8cc7800
>[  205.964203] [drm:intel_enable_pipe [i915]] enabling pipe A
>[  205.964239] [drm:intel_edp_backlight_on.part.27 [i915]] 
>[  205.964280] [drm:intel_panel_enable_backlight [i915]] pipe A
>[  205.964309] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 28800
>[  205.970665] [drm:intel_psr_enable [i915]] PSR not supported on this platform
>[  205.970690] [drm:intel_edp_drrs_enable [i915]] Panel doesn't support DRRS
>[  205.970754] [drm:intel_enable_shared_dpll [i915]] enable PORT PLL C (active 2, on? 0) for crtc 42
>[  205.970779] [drm:intel_enable_shared_dpll [i915]] enabling PORT PLL C
>[  205.972051] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[  205.972075] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[  205.972101] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[  205.972932] [drm:intel_dp_start_link_train [i915]] clock recovery OK
>[  205.972957] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS2
>[  205.973935] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
>[  205.976205] [drm:skylake_pfit_enable [i915]] for crtc_state = ffff9cf3a8cc7000
>[  205.976274] [drm:intel_enable_pipe [i915]] enabling pipe B
>[  205.993096] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:51:eDP-1]
>[  205.993125] [drm:intel_atomic_commit_tail [i915]] [CRTC:33:pipe A]
>[  205.993205] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL A
>[  205.993265] [drm:verify_connector_state.isra.83 [i915]] [CONNECTOR:66:DP-2]
>[  205.993294] [drm:intel_atomic_commit_tail [i915]] [CRTC:42:pipe B]
>[  205.993354] [drm:verify_single_dpll_state.isra.115 [i915]] PORT PLL C
>[  205.993396] [drm:intel_atomic_commit_tail [i915]] [CRTC:49:pipe C]
>[  205.993437] [drm:bxt_hpd_irq_setup [i915]] Invert bit setting: hp_ctl:18001818 hp_port:38
>[  205.993464] [drm:intel_opregion_register [i915]] 5 outputs detected
>[  205.993599] [drm:intel_dp_detect [i915]] [CONNECTOR:51:eDP-1]
>[  205.993626] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[  205.993652] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[  205.993678] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[  205.993703] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[  205.996906] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-1c-f8 dev-ID b\006UA\021\001 HW-rev 10.0 SW-rev 1.8
>[  205.997355] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:51:eDP-1] status updated from connected to connected
>[  205.997380] [drm:intel_dp_detect [i915]] [CONNECTOR:59:DP-1]
>[  205.997389] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:59:DP-1] status updated from disconnected to disconnected
>[  205.997415] [drm:intel_hdmi_detect [i915]] [CONNECTOR:63:HDMI-A-1]
>[  205.997616] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[  205.997641] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[  205.997841] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[  205.997864] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[  205.998080] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[  205.998104] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[  205.998324] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[  205.998334] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[  205.998341] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:63:HDMI-A-1] status updated from disconnected to disconnected
>[  205.998366] [drm:intel_dp_detect [i915]] [CONNECTOR:66:DP-2]
>[  205.998924] [drm:intel_dp_read_dpcd [i915]] DPCD: 11 0a 84 01 01 00 01 00 02 02 06 04 00 00 00
>[  205.999384] [drm:intel_dp_detect [i915]] Display Port TPS3 support: source yes, sink no
>[  205.999412] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000
>[  205.999439] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000
>[  205.999464] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000
>[  205.999963] [drm:intel_dp_read_desc [i915]] DP sink: OUI 00-00-00(NS) dev-ID  HW-rev 0.0 SW-rev 0.0
>[  205.999988] [drm:intel_dp_detect [i915]] Sink is not MST capable
>[  206.000409] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:66:DP-2] status updated from connected to connected
>[  206.000434] [drm:intel_hdmi_detect [i915]] [CONNECTOR:70:HDMI-A-2]
>[  206.000672] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[  206.000697] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[  206.000904] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[  206.000919] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[  206.001135] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[  206.001160] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[  206.001367] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[  206.001376] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[  206.001383] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:70:HDMI-A-2] status updated from disconnected to disconnected
>[  206.194638] atkbd serio0: Failed to enable keyboard on isa0060/serio0
>[  206.210715] usb 1-4: reset low-speed USB device number 2 using xhci_hcd
>[  206.403407] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  206.614954] hpet1: lost 7161 rtc interrupts
>[  206.618742] usb 1-7: reset full-speed USB device number 3 using xhci_hcd
>[  206.761722] PM: restore of devices complete after 1049.344 msecs
>[  206.761817] usb 1-7:1.0: rebind failed: -517
>[  206.761820] usb 1-7:1.1: rebind failed: -517
>[  206.762172] PM: Image restored successfully.
>[  206.762212] PM: Basic memory bitmaps freed
>[  206.762213] Restarting tasks ... done.
>[  206.795133] Bluetooth: hci0: read Intel version: 370810011003110e23
>[  206.795135] Bluetooth: hci0: Intel device is already patched. patch num: 23
>[  207.087489] ata1.00: configured for UDMA/133
>[  207.116002] [drm] RC6 on
>[  208.674740] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
>[  208.674801] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
>[  208.723402] igb 0000:01:00.0 enp1s0: igb: enp1s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX

Actions: View

Attachments on bug 94698: 122556 | 124932 | 124933 | 128494

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.