Attachment 131053 Details for Bug 100755 – Dmesg of working version

Dmesg of working version

dmesg.good (text/plain), 76.98 KB, created by Rafael Ristovski on 2017-04-26 16:16:53 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Rafael Ristovski

Created: 2017-04-26 16:16:53 UTC

Size: 76.98 KB

patch

obsolete

>[    0.000000] microcode: microcode updated early to revision 0x1f, date = 2016-04-01
>[    0.000000] Linux version 4.11.0-rc7-next-20170421-00001-ga31d0bc-dirty (rafael@RPC) (gcc version 7.0.0-alpha20170219 20170219 (experimental) (Gentoo 7.0.0_alpha20170219) ) #26 SMP PREEMPT Sat Apr 22 17:08:16 CEST 2017
>[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.11.0-rc7-next-20170421-00001-ga31d0bc-dirty root=/dev/sda4 ro drm.debug=14
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094d5ffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000094d60000-0x0000000095d5ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000095d60000-0x000000009aabefff] usable
>[    0.000000] BIOS-e820: [mem 0x000000009aabf000-0x000000009aebefff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.7 present.
>[    0.000000] DMI: Dell Inc. Inspiron 3537/0PHTY0, BIOS A07 11/12/2013
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-E7FFF write-protect
>[    0.000000]   E8000-EFFFF write-combining
>[    0.000000]   F0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0000000000 mask 7F80000000 write-back
>[    0.000000]   1 base 0080000000 mask 7FE0000000 write-back
>[    0.000000]   2 base 009B000000 mask 7FFF000000 uncachable
>[    0.000000]   3 base 009C000000 mask 7FFC000000 uncachable
>[    0.000000]   4 base 00FFC00000 mask 7FFFC00000 write-protect
>[    0.000000]   5 base 0100000000 mask 7F00000000 write-back
>[    0.000000]   6 base 0200000000 mask 7F80000000 write-back
>[    0.000000]   7 base 025F600000 mask 7FFFE00000 uncachable
>[    0.000000]   8 base 025F800000 mask 7FFF800000 uncachable
>[    0.000000]   9 base 0260000000 mask 7FE0000000 uncachable
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
>[    0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
>[    0.000000] Using GB pages for direct mapping
>[    0.000000] BRK [0x021cd000, 0x021cdfff] PGTABLE
>[    0.000000] BRK [0x021ce000, 0x021cefff] PGTABLE
>[    0.000000] BRK [0x021cf000, 0x021cffff] PGTABLE
>[    0.000000] BRK [0x021d0000, 0x021d0fff] PGTABLE
>[    0.000000] BRK [0x021d1000, 0x021d1fff] PGTABLE
>[    0.000000] BRK [0x021d2000, 0x021d2fff] PGTABLE
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL  )
>[    0.000000] ACPI: XSDT 0x000000009AFFE210 0000A4 (v01 DELL   CL09     00000001      01000013)
>[    0.000000] ACPI: FACP 0x000000009AFF9000 00010C (v05 DELL   CL09     00000001 ASL  00040000)
>[    0.000000] ACPI: DSDT 0x000000009AFEA000 00B97B (v01 DELL   CL09     00000000 ASL  00040000)
>[    0.000000] ACPI: FACS 0x000000009AFB8000 000040
>[    0.000000] ACPI: UEFI 0x000000009AFFD000 000236 (v01 DELL   CL09     00000001 ASL  00040000)
>[    0.000000] ACPI: FPDT 0x000000009AFFB000 000044 (v01 DELL   CL09     00000001 ASL  00040000)
>[    0.000000] ACPI: ASF! 0x000000009AFFA000 0000A5 (v32 DELL   CL09     00000001 ASL  00040000)
>[    0.000000] ACPI: HPET 0x000000009AFF8000 000038 (v01 DELL   CL09     00000001 ASL  00040000)
>[    0.000000] ACPI: APIC 0x000000009AFF7000 00008C (v03 DELL   CL09     00000001 ASL  00040000)
>[    0.000000] ACPI: MCFG 0x000000009AFF6000 00003C (v01 DELL   CL09     00000001 ASL  00040000)
>[    0.000000] ACPI: SSDT 0x000000009AFE9000 0006FE (v01 COMPAL CRV ORB  00001000 ACPI 00040000)
>[    0.000000] ACPI: BOOT 0x000000009AFE7000 000028 (v01 DELL   CL09     00000001 ASL  00040000)
>[    0.000000] ACPI: LPIT 0x000000009AFE6000 000094 (v01 DELL   CL09     00000001 ASL  00040000)
>[    0.000000] ACPI: ASPT 0x000000009AFE4000 000034 (v07 DELL   CL09     00000001 ASL  00040000)
>[    0.000000] ACPI: DBGP 0x000000009AFE3000 000034 (v01 DELL   CL09     00000001 ASL  00040000)
>[    0.000000] ACPI: SSDT 0x000000009AFDD000 000539 (v01 COMPAL CRV ORB  00003000 ACPI 00040000)
>[    0.000000] ACPI: SSDT 0x000000009AFDC000 000AD8 (v01 COMPAL CRV ORB  00003000 ACPI 00040000)
>[    0.000000] ACPI: SSDT 0x000000009AFD8000 003517 (v01 COMPAL CRV ORB  00003000 ACPI 00040000)
>[    0.000000] ACPI: SSDT 0x000000009AFD6000 001E3D (v01 COMPAL CRV ORB  00001000 ACPI 00040000)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x25f5f9000-0x25f5fcfff]
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000025f5fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000094d5ffff]
>[    0.000000]   node   0: [mem 0x0000000095d60000-0x000000009aabefff]
>[    0.000000]   node   0: [mem 0x000000009afff000-0x000000009affffff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000025f5fffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff]
>[    0.000000] On node 0 totalpages: 2068572
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 9771 pages used for memmap
>[    0.000000]   DMA32 zone: 625344 pages, LIFO batch:31
>[    0.000000]   Normal zone: 22488 pages used for memmap
>[    0.000000]   Normal zone: 1439232 pages, LIFO batch:31
>[    0.000000] Reserving Intel graphics memory at 0x000000009ba00000-0x000000009f9fffff
>[    0.000000] ACPI: PM-Timer IO Port: 0x1808
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x94d60000-0x95d5ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9aabf000-0x9aebefff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
>[    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
>[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] percpu: Embedded 37 pages/cpu @ffff88025f200000 s112600 r8192 d30760 u262144
>[    0.000000] pcpu-alloc: s112600 r8192 d30760 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2036228
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0-rc7-next-20170421-00001-ga31d0bc-dirty root=/dev/sda4 ro drm.debug=14
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Memory: 8057652K/8274288K available (9454K kernel code, 1488K rwdata, 3512K rodata, 1404K init, 880K bss, 216636K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] ftrace: allocating 35090 entries in 138 pages
>[    0.000000] Preemptible hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS:8448 nr_irqs:760 16
>[    0.000000] NO_HZ: Clearing 0 from nohz_full range for timekeeping
>[    0.000000] NO_HZ: Full dynticks CPUs: 1-7.
>[    0.000000] 	Note: kernel parameter 'rcu_nocbs=' contains nonexistent CPUs.
>[    0.000000] 	Offload RCU callbacks from CPUs: 1-7.
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.001000] tsc: Detected 2394.418 MHz processor
>[    0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.83 BogoMIPS (lpj=2394418)
>[    0.001000] pid_max: default: 32768 minimum: 301
>[    0.001000] ACPI: Core revision 20170119
>[    0.014010] ACPI: 6 ACPI AML tables successfully acquired and loaded
>[    0.014069] Security Framework initialized
>[    0.014102] Yama: becoming mindful.
>[    0.015634] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.016447] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.016517] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.016580] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.016839] CPU: Physical Processor ID: 0
>[    0.016872] CPU: Processor Core ID: 0
>[    0.016907] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.016943] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.016987] mce: CPU supports 7 MCE banks
>[    0.017012] CPU0: Thermal monitoring enabled (TM1)
>[    0.017059] process: using mwait in idle threads
>[    0.017094] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
>[    0.017131] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
>[    0.017328] Freeing SMP alternatives memory: 28K
>[    0.018066] smpboot: Max logical packages: 4
>[    0.019520] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.029567] TSC deadline timer enabled
>[    0.029570] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (family: 0x6, model: 0x45, stepping: 0x1)
>[    0.033021] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
>[    0.033130] ... version:                3
>[    0.033162] ... bit width:              48
>[    0.033194] ... generic registers:      4
>[    0.033226] ... value mask:             0000ffffffffffff
>[    0.033261] ... max period:             00007fffffffffff
>[    0.033295] ... fixed-purpose events:   3
>[    0.034001] ... event mask:             000000070000000f
>[    0.038475] NMI watchdog: Disabling watchdog on nohz_full cores by default
>[    0.040170] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.042014] smp: Bringing up secondary CPUs ...
>[    0.050053] x86: Booting SMP configuration:
>[    0.050086] .... node  #0, CPUs:      #1 #2 #3
>[    0.250022] smp: Brought up 1 node, 4 CPUs
>[    0.250071] smpboot: Total of 4 processors activated (19175.50 BogoMIPS)
>[    0.251128] sched_clock: Marking stable (251000000, 0)->(254916077, -3916077)
>[    0.251474] devtmpfs: initialized
>[    0.251677] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
>[    0.251807] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
>[    0.251878] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.251985] pinctrl core: initialized pinctrl subsystem
>[    0.252185] NET: Registered protocol family 16
>[    0.252401] cpuidle: using governor ladder
>[    0.252437] PCCT header not found.
>[    0.252498] Simple Boot Flag at 0x44 set to 0x1
>[    0.252545] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.252602] ACPI: bus type PCI registered
>[    0.252691] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.252794] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    0.252848] PCI: Using configuration type 1 for base access
>[    0.252890] dmi type 0xB1 record - unknown flag
>[    0.252965] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
>[    0.254750] HugeTLB registered 1 GB page size, pre-allocated 0 pages
>[    0.254790] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.255053] ACPI: Added _OSI(Module Device)
>[    0.255087] ACPI: Added _OSI(Processor Device)
>[    0.255120] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.255154] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.255415] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.261322] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.262390] ACPI: Dynamic OEM Table Load:
>[    0.262431] ACPI: SSDT 0xFFFF880255591000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20130117)
>[    0.262898] ACPI: Dynamic OEM Table Load:
>[    0.262938] ACPI: SSDT 0xFFFF88025555C000 0005AA (v01 PmRef  ApIst    00003000 INTL 20130117)
>[    0.263446] ACPI: Dynamic OEM Table Load:
>[    0.263484] ACPI: SSDT 0xFFFF8802555F4400 000119 (v01 PmRef  ApCst    00003000 INTL 20130117)
>[    0.264644] ACPI : EC: EC started
>[    0.264676] ACPI : EC: interrupt blocked
>[    0.396383] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
>[    0.396420] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.396477] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
>[    0.396534] ACPI: Interpreter enabled
>[    0.396603] ACPI: (supports S0 S3 S4 S5)
>[    0.396635] ACPI: Using IOAPIC for interrupt routing
>[    0.396699] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.538507] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    0.538550] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.539198] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.539257] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
>[    0.539743] PCI host bridge to bus 0000:00
>[    0.539778] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.539817] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.539856] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.539914] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
>[    0.539971] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    0.540014] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
>[    0.540173] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
>[    0.540185] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
>[    0.540192] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
>[    0.540198] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
>[    0.540348] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
>[    0.540358] pci 0000:00:03.0: reg 0x10: [mem 0xc0810000-0xc0813fff 64bit]
>[    0.540534] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
>[    0.540551] pci 0000:00:14.0: reg 0x10: [mem 0xc0800000-0xc080ffff 64bit]
>[    0.540613] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.540733] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.540806] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
>[    0.540825] pci 0000:00:16.0: reg 0x10: [mem 0xc0818000-0xc081801f 64bit]
>[    0.540898] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.541038] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
>[    0.541055] pci 0000:00:1b.0: reg 0x10: [mem 0xc0814000-0xc0817fff 64bit]
>[    0.541124] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.541256] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
>[    0.541325] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.541499] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.541573] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
>[    0.541642] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.543402] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
>[    0.543474] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>[    0.543647] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
>[    0.544560] pci 0000:00:1d.0: reg 0x10: [mem 0xc081c000-0xc081c3ff]
>[    0.550008] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.550131] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.550206] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
>[    0.550444] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
>[    0.550457] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
>[    0.550464] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
>[    0.550472] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
>[    0.550479] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
>[    0.550486] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
>[    0.550493] pci 0000:00:1f.2: reg 0x24: [mem 0xc081b000-0xc081b7ff]
>[    0.550529] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.550653] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
>[    0.550668] pci 0000:00:1f.3: reg 0x10: [mem 0xc0819000-0xc08190ff 64bit]
>[    0.550688] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
>[    0.550887] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
>[    0.550920] pci 0000:01:00.0: reg 0x10: [io  0x4000-0x40ff]
>[    0.550953] pci 0000:01:00.0: reg 0x18: [mem 0xc0700000-0xc0700fff 64bit]
>[    0.550989] pci 0000:01:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
>[    0.551098] pci 0000:01:00.0: supports D1 D2
>[    0.551100] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.554023] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.554061] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
>[    0.554065] pci 0000:00:1c.0:   bridge window [mem 0xc0700000-0xc07fffff]
>[    0.554069] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
>[    0.554154] pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
>[    0.554196] pci 0000:02:00.0: reg 0x10: [mem 0xc0600000-0xc0607fff 64bit]
>[    0.554390] pci 0000:02:00.0: supports D1 D2
>[    0.554392] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    0.558280] pci 0000:00:1c.3: PCI bridge to [bus 02]
>[    0.558320] pci 0000:00:1c.3:   bridge window [mem 0xc0600000-0xc06fffff]
>[    0.558392] pci 0000:03:00.0: [1002:6823] type 00 class 0x030000
>[    0.558420] pci 0000:03:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
>[    0.558437] pci 0000:03:00.0: reg 0x18: [mem 0xc0500000-0xc053ffff 64bit]
>[    0.558446] pci 0000:03:00.0: reg 0x20: [io  0x3000-0x30ff]
>[    0.558464] pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
>[    0.558550] pci 0000:03:00.0: supports D1 D2
>[    0.558551] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
>[    0.558625] pci 0000:03:00.0: System wakeup disabled by ACPI
>[    0.561264] pci 0000:00:1c.4: PCI bridge to [bus 03]
>[    0.561301] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
>[    0.561304] pci 0000:00:1c.4:   bridge window [mem 0xc0500000-0xc05fffff]
>[    0.561309] pci 0000:00:1c.4:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
>[    1.333691] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    1.333785] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    1.333895] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    1.333986] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    1.334075] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    1.334184] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    1.334299] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    1.334388] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    1.334701] ACPI: Enabled 5 GPEs in block 00 to 7F
>[    1.334793] ACPI : EC: interrupt unblocked
>[    1.334832] ACPI : EC: event unblocked
>[    1.334870] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    1.334927] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
>[    1.335060] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    1.335098] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    1.335163] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
>[    1.335222] pci 0000:03:00.0: vgaarb: bridge control possible
>[    1.335263] pci 0000:00:02.0: vgaarb: no bridge control possible
>[    1.335300] vgaarb: loaded
>[    1.335394] SCSI subsystem initialized
>[    1.335465] libata version 3.00 loaded.
>[    1.335482] EDAC MC: Ver: 3.0.0
>[    1.335651] PCI: Using ACPI for IRQ routing
>[    1.341644] PCI: pci_cache_line_size set to 64 bytes
>[    1.341715] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
>[    1.341716] e820: reserve RAM buffer [mem 0x94d60000-0x97ffffff]
>[    1.341718] e820: reserve RAM buffer [mem 0x9aabf000-0x9bffffff]
>[    1.341719] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
>[    1.341720] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
>[    1.341893] NetLabel: Initializing
>[    1.341925] NetLabel:  domain hash size = 128
>[    1.341957] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    1.342009] NetLabel:  unlabeled traffic allowed by default
>[    1.342134] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    1.342177] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    1.344234] clocksource: Switched to clocksource hpet
>[    1.358798] VFS: Disk quotas dquot_6.6.0
>[    1.358851] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.358974] pnp: PnP ACPI init
>[    1.359142] system 00:00: [io  0x0680-0x069f] has been reserved
>[    1.359181] system 00:00: [io  0xfd60-0xfd63] has been reserved
>[    1.359219] system 00:00: [io  0xffff] has been reserved
>[    1.359263] system 00:00: [io  0xffff] has been reserved
>[    1.359299] system 00:00: [io  0xffff] has been reserved
>[    1.359334] system 00:00: [io  0x1800-0x18fe] has been reserved
>[    1.359371] system 00:00: [io  0x164e-0x164f] has been reserved
>[    1.359411] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.359461] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    1.359515] system 00:02: [io  0x1854-0x1857] has been reserved
>[    1.359554] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    1.359593] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
>[    1.359618] pnp 00:04: Plug and Play ACPI device, IDs DLL05eb PNP0f13 (active)
>[    1.425408] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    1.425448] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
>[    1.425490] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
>[    1.425528] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
>[    1.425567] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
>[    1.425606] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    1.425645] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
>[    1.425684] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
>[    1.425723] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
>[    1.425763] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    1.425802] system 00:05: [mem 0x9fa22000-0x9fa22fff] has been reserved
>[    1.425841] system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved
>[    1.425882] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.426465] pnp: PnP ACPI: found 6 devices
>[    1.432543] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    1.432609] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
>[    1.432696] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    1.432732] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
>[    1.432773] pci 0000:00:1c.0:   bridge window [mem 0xc0700000-0xc07fffff]
>[    1.432814] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
>[    1.432875] pci 0000:00:1c.3: PCI bridge to [bus 02]
>[    1.432913] pci 0000:00:1c.3:   bridge window [mem 0xc0600000-0xc06fffff]
>[    1.432960] pci 0000:03:00.0: BAR 6: assigned [mem 0xc0540000-0xc055ffff pref]
>[    1.433017] pci 0000:00:1c.4: PCI bridge to [bus 03]
>[    1.433052] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
>[    1.433092] pci 0000:00:1c.4:   bridge window [mem 0xc0500000-0xc05fffff]
>[    1.433133] pci 0000:00:1c.4:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
>[    1.433196] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    1.433198] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    1.433199] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    1.433201] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
>[    1.433202] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
>[    1.433203] pci_bus 0000:01: resource 1 [mem 0xc0700000-0xc07fffff]
>[    1.433205] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
>[    1.433206] pci_bus 0000:02: resource 1 [mem 0xc0600000-0xc06fffff]
>[    1.433207] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
>[    1.433209] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
>[    1.433210] pci_bus 0000:03: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
>[    1.433337] NET: Registered protocol family 2
>[    1.433530] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    1.433719] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    1.433893] TCP: Hash tables configured (established 65536 bind 65536)
>[    1.433966] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    1.434029] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    1.434126] NET: Registered protocol family 1
>[    1.434172] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    1.447381] PCI: CLS 64 bytes, default 64
>[    1.447399] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    1.447440] software IO TLB [mem 0x96abf000-0x9aabf000] (64MB) mapped at [ffff880096abf000-ffff88009aabefff]
>[    1.447573] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
>[    1.447631] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>[    1.447667] RAPL PMU: hw unit of domain package 2^-14 Joules
>[    1.447702] RAPL PMU: hw unit of domain dram 2^-14 Joules
>[    1.447738] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>[    1.448304] Scanning for low memory corruption every 60 seconds
>[    1.449133] workingset: timestamp_bits=40 max_order=21 bucket_order=0
>[    1.451292] zbud: loaded
>[    1.451738] ntfs: driver 2.1.32 [Flags: R/O].
>[    1.451861] JFS: nTxBlock = 8192, nTxLock = 65536
>[    1.453085] SGI XFS with security attributes, no debug enabled
>[    1.454113] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    1.454206] io scheduler noop registered
>[    1.454250] io scheduler deadline registered
>[    1.454290] io scheduler cfq registered (default)
>[    1.454324] io scheduler mq-deadline registered
>[    1.454357] io scheduler kyber registered
>[    1.454416] io scheduler bfq registered
>[    1.455081] pcieport 0000:00:1c.0: Signaling PME with IRQ 40
>[    1.455134] pcieport 0000:00:1c.3: Signaling PME with IRQ 41
>[    1.455186] pcieport 0000:00:1c.4: Signaling PME with IRQ 42
>[    1.455344] ACPI: AC Adapter [ACAD] (on-line)
>[    1.455463] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input0
>[    1.455531] ACPI: Lid Switch [LID0]
>[    1.455595] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input1
>[    1.455660] ACPI: Power Button [PWRB]
>[    1.455731] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    1.455789] ACPI: Power Button [PWRF]
>[    1.456244] Monitor-Mwait will be used to enter C-1 state
>[    1.456256] Monitor-Mwait will be used to enter C-2 state
>[    1.457199] GHES: HEST is not enabled!
>[    1.677318] [Firmware Bug]: battery: (dis)charge rate invalid.
>[    1.677396] ACPI: Battery Slot [BAT1] (battery present)
>[    1.677549] Linux agpgart interface v0.103
>[    1.677771] [drm:i915_driver_load] Found LynxPoint LP PCH
>[    1.677776] [drm:intel_power_domains_init] Allowed DC state mask 00
>[    1.677845] [drm:intel_device_info_dump] i915 device info: platform=HASWELL gen=7 pciid=0x0a16 rev=0x09
>[    1.677847] [drm:intel_device_info_dump] i915 device info: is_mobile: no
>[    1.677848] [drm:intel_device_info_dump] i915 device info: is_lp: no
>[    1.677850] [drm:intel_device_info_dump] i915 device info: is_alpha_support: no
>[    1.677851] [drm:intel_device_info_dump] i915 device info: has_64bit_reloc: no
>[    1.677852] [drm:intel_device_info_dump] i915 device info: has_aliasing_ppgtt: yes
>[    1.677853] [drm:intel_device_info_dump] i915 device info: has_csr: no
>[    1.677854] [drm:intel_device_info_dump] i915 device info: has_ddi: yes
>[    1.677856] [drm:intel_device_info_dump] i915 device info: has_decoupled_mmio: no
>[    1.677857] [drm:intel_device_info_dump] i915 device info: has_dp_mst: yes
>[    1.677858] [drm:intel_device_info_dump] i915 device info: has_fbc: yes
>[    1.677859] [drm:intel_device_info_dump] i915 device info: has_fpga_dbg: yes
>[    1.677861] [drm:intel_device_info_dump] i915 device info: has_full_ppgtt: yes
>[    1.677862] [drm:intel_device_info_dump] i915 device info: has_full_48bit_ppgtt: no
>[    1.677863] [drm:intel_device_info_dump] i915 device info: has_gmbus_irq: yes
>[    1.677864] [drm:intel_device_info_dump] i915 device info: has_gmch_display: no
>[    1.677865] [drm:intel_device_info_dump] i915 device info: has_guc: no
>[    1.677866] [drm:intel_device_info_dump] i915 device info: has_hotplug: yes
>[    1.677868] [drm:intel_device_info_dump] i915 device info: has_hw_contexts: yes
>[    1.677869] [drm:intel_device_info_dump] i915 device info: has_l3_dpf: yes
>[    1.677870] [drm:intel_device_info_dump] i915 device info: has_llc: yes
>[    1.677871] [drm:intel_device_info_dump] i915 device info: has_logical_ring_contexts: no
>[    1.677872] [drm:intel_device_info_dump] i915 device info: has_overlay: no
>[    1.677874] [drm:intel_device_info_dump] i915 device info: has_pipe_cxsr: no
>[    1.677875] [drm:intel_device_info_dump] i915 device info: has_pooled_eu: no
>[    1.677876] [drm:intel_device_info_dump] i915 device info: has_psr: yes
>[    1.677877] [drm:intel_device_info_dump] i915 device info: has_rc6: yes
>[    1.677878] [drm:intel_device_info_dump] i915 device info: has_rc6p: no
>[    1.677879] [drm:intel_device_info_dump] i915 device info: has_resource_streamer: yes
>[    1.677881] [drm:intel_device_info_dump] i915 device info: has_runtime_pm: yes
>[    1.677882] [drm:intel_device_info_dump] i915 device info: has_snoop: no
>[    1.677883] [drm:intel_device_info_dump] i915 device info: unfenced_needs_alignment: no
>[    1.677884] [drm:intel_device_info_dump] i915 device info: cursor_needs_physical: no
>[    1.677885] [drm:intel_device_info_dump] i915 device info: hws_needs_physical: no
>[    1.677887] [drm:intel_device_info_dump] i915 device info: overlay_needs_physical: no
>[    1.677888] [drm:intel_device_info_dump] i915 device info: supports_tv: no
>[    1.677942] [drm:intel_device_info_runtime_init] slice mask: 0000
>[    1.677943] [drm:intel_device_info_runtime_init] slice total: 0
>[    1.677944] [drm:intel_device_info_runtime_init] subslice total: 0
>[    1.677946] [drm:intel_device_info_runtime_init] subslice mask 0000
>[    1.677947] [drm:intel_device_info_runtime_init] subslice per slice: 0
>[    1.677948] [drm:intel_device_info_runtime_init] EU total: 0
>[    1.677949] [drm:intel_device_info_runtime_init] EU per subslice: 0
>[    1.677951] [drm:intel_device_info_runtime_init] has slice power gating: n
>[    1.677952] [drm:intel_device_info_runtime_init] has subslice power gating: n
>[    1.677953] [drm:intel_device_info_runtime_init] has EU power gating: n
>[    1.677956] [drm:i915_driver_load] ppgtt mode: 1
>[    1.677958] [drm:i915_driver_load] use GPU semaphores? yes
>[    1.677966] [drm] Memory usable by graphics device = 2048M
>[    1.678005] [drm:i915_ggtt_probe_hw] GMADR size = 256M
>[    1.678006] [drm:i915_ggtt_probe_hw] GTT stolen size = 64M
>[    1.678008] [drm] Replacing VGA console driver
>[    1.678685] Console: switching to colour dummy device 80x25
>[    1.678745] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K
>[    1.678753] [drm:intel_opregion_setup] graphic opregion physical addr: 0x9afb2018
>[    1.678761] [drm:intel_opregion_setup] Public ACPI methods supported
>[    1.678762] [drm:intel_opregion_setup] SWSCI supported
>[    1.684346] [drm:intel_opregion_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    1.684349] [drm:intel_opregion_setup] ASLE supported
>[    1.684351] [drm:intel_opregion_setup] ASLE extension supported
>[    1.684354] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    1.684413] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    1.684421] [drm] Driver supports precise vblank timestamp query.
>[    1.684429] [drm:intel_bios_init] Set default to SSC at 120000 kHz
>[    1.684432] [drm:intel_bios_init] VBT signature "$VBT HASWELL        ", BDB version 176
>[    1.684435] [drm:intel_bios_init] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    1.684437] [drm:intel_bios_init] crt_ddc_bus_pin: 2
>[    1.686283] [drm:intel_opregion_get_panel_type] Ignoring OpRegion panel type (0)
>[    1.686286] [drm:intel_bios_init] Panel type: 2 (VBT)
>[    1.686288] [drm:intel_bios_init] DRRS supported mode is seamless
>[    1.686292] [drm:intel_bios_init] Found panel mode in BIOS VBT tables:
>[    1.686297] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 0 69300 1366 1374 1384 1462 768 771 772 790 0x8 0xa
>[    1.686300] [drm:intel_bios_init] VBT initial LVDS value 200300
>[    1.686303] [drm:intel_bios_init] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255, controller 0
>[    1.686305] [drm:intel_bios_init] Found SDVO panel mode in BIOS VBT tables:
>[    1.686309] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    1.686311] [drm:intel_bios_init] No SDVO device info is found in VBT
>[    1.686313] [drm:intel_bios_init] DRRS State Enabled:0
>[    1.686317] [drm:intel_bios_init] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    1.686319] [drm:intel_bios_init] VBT HDMI level shift for port A: 0
>[    1.686322] [drm:intel_bios_init] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    1.686324] [drm:intel_bios_init] VBT HDMI level shift for port B: 7
>[    1.686336] [drm:intel_dsm_detect] no _DSM method for intel device
>[    1.686343] [drm:intel_dsm_detect] no _DSM method for intel device
>[    1.686349] [drm:intel_update_rawclk] rawclk rate: 24000 kHz
>[    1.686354] [drm:intel_power_well_enable] enabling always-on
>[    1.686356] [drm:intel_power_well_enable] enabling display
>[    1.686607] [drm:intel_fbc_init] Sanitized enable_fbc value: 0
>[    1.686611] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
>[    1.686612] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec)
>[    1.686614] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec)
>[    1.686616] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec)
>[    1.686617] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
>[    1.686619] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
>[    1.686621] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec)
>[    1.686622] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec)
>[    1.686624] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec)
>[    1.686626] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
>[    1.686627] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
>[    1.686629] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec)
>[    1.686630] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec)
>[    1.686632] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec)
>[    1.686634] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
>[    1.686638] [drm:intel_modeset_init] 3 display pipes available.
>[    1.686664] [drm:intel_update_cdclk] Current CD clock rate: 450000 kHz, VCO: 0 kHz, ref: 0 kHz
>[    1.686741] [drm:intel_update_max_cdclk] Max CD clock rate: 450000 kHz
>[    1.686743] [drm:intel_update_max_cdclk] Max dotclock rate: 450000 kHz
>[    1.686747] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
>[    1.687065] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    1.687069] [drm:intel_dp_init_connector] using AUX A for port A (VBT)
>[    1.687078] [drm:intel_pps_dump_state] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
>[    1.687081] [drm:intel_pps_dump_state] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    1.687084] [drm:intel_dp_init_panel_power_sequencer.part.16] panel power up delay 200, power down delay 50, power cycle delay 600
>[    1.687086] [drm:intel_dp_init_panel_power_sequencer.part.16] backlight on delay 1, off delay 200
>[    1.687093] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    1.687098] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    1.687105] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f
>[    1.688071] [drm:intel_dp_read_dpcd] DPCD: 11 0a 82 01 00 00 01 80 02 00 00 00 00 01 00
>[    1.689009] [drm:intel_dp_read_desc] DP sink: OUI 00-e0-4c dev-ID  HW-rev 0.0 SW-rev 0.0
>[    1.695076] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.695078] [drm:intel_dp_init_connector] VBT doesn't support DRRS
>[    1.695086] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 937/937
>[    1.695095] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B
>[    1.695098] [drm:intel_hdmi_init_connector] Using DDC pin 0x5 for port B (VBT)
>[    1.695100] [drm:intel_ddi_init] VBT says port C is not DVI/HDMI/DP compatible, respect it
>[    1.695173] [drm:intel_set_plane_visible] pipe A active planes 0x0
>[    1.695176] [drm:intel_modeset_setup_hw_state] [CRTC:32:pipe A] hw state readout: enabled
>[    1.695178] [drm:intel_set_plane_visible] pipe B active planes 0x0
>[    1.695180] [drm:intel_modeset_setup_hw_state] [CRTC:39:pipe B] hw state readout: disabled
>[    1.695182] [drm:intel_set_plane_visible] pipe C active planes 0x0
>[    1.695184] [drm:intel_modeset_setup_hw_state] [CRTC:46:pipe C] hw state readout: disabled
>[    1.695187] [drm:intel_modeset_setup_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1
>[    1.695190] [drm:intel_modeset_setup_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[    1.695193] [drm:intel_modeset_setup_hw_state] SPLL hw state readout: crtc_mask 0x00000000, on 0
>[    1.695195] [drm:intel_modeset_setup_hw_state] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1
>[    1.695197] [drm:intel_modeset_setup_hw_state] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1
>[    1.695199] [drm:intel_modeset_setup_hw_state] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1
>[    1.695205] [drm:intel_modeset_setup_hw_state] [ENCODER:47:DDI A] hw state readout: enabled, pipe A
>[    1.695208] [drm:intel_modeset_setup_hw_state] [ENCODER:56:DDI B] hw state readout: disabled, pipe A
>[    1.695211] [drm:intel_modeset_setup_hw_state] [CONNECTOR:48:eDP-1] hw state readout: enabled
>[    1.695214] [drm:intel_modeset_setup_hw_state] [CONNECTOR:57:HDMI-A-1] hw state readout: disabled
>[    1.695227] [drm:intel_dump_pipe_config] [CRTC:32:pipe A][setup_hw_state]
>[    1.695229] [drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 18, dithering: 0
>[    1.695231] [drm:intel_dump_pipe_config] dp m_n: lanes: 2; gmch_m: 2428257, gmch_n: 8388608, link_m: 134903, link_n: 524288, tu: 64
>[    1.695233] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.695234] [drm:intel_dump_pipe_config] requested mode:
>[    1.695238] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 69472 1366 1374 1384 1462 768 771 772 790 0x40 0x9
>[    1.695250] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.695253] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 69472 1366 1374 1384 1462 768 771 772 790 0x40 0x9
>[    1.695256] [drm:intel_dump_pipe_config] crtc timings: 69472 1366 1374 1384 1462 768 771 772 790, type: 0x40 flags: 0x9
>[    1.695258] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 720x400, pixel rate 69472
>[    1.695260] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x05560300, enabled
>[    1.695262] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[    1.695265] [drm:hsw_dump_hw_state] dpll_hw_state: wrpll: 0x90280202 spll: 0x0
>[    1.695267] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.695268] [drm:intel_dump_pipe_config] [PLANE:26:primary A] disabled, scaler_id = 0
>[    1.695270] [drm:intel_dump_pipe_config] [PLANE:28:sprite A] disabled, scaler_id = 0
>[    1.695272] [drm:intel_dump_pipe_config] [PLANE:30:cursor A] disabled, scaler_id = 0
>[    1.695274] [drm:intel_dump_pipe_config] [CRTC:39:pipe B][setup_hw_state]
>[    1.695276] [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[    1.695277] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.695279] [drm:intel_dump_pipe_config] requested mode:
>[    1.695282] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.695283] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.695286] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.695288] [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.695290] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0
>[    1.695292] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.695293] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[    1.695296] [drm:hsw_dump_hw_state] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    1.695297] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.695299] [drm:intel_dump_pipe_config] [PLANE:33:primary B] disabled, scaler_id = 0
>[    1.695300] [drm:intel_dump_pipe_config] [PLANE:35:sprite B] disabled, scaler_id = 0
>[    1.695302] [drm:intel_dump_pipe_config] [PLANE:37:cursor B] disabled, scaler_id = 0
>[    1.695304] [drm:intel_dump_pipe_config] [CRTC:46:pipe C][setup_hw_state]
>[    1.695306] [drm:intel_dump_pipe_config] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[    1.695307] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.695309] [drm:intel_dump_pipe_config] requested mode:
>[    1.695311] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.695312] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.695315] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    1.695317] [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    1.695319] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0
>[    1.695320] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.695322] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[    1.695324] [drm:hsw_dump_hw_state] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    1.695326] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.695327] [drm:intel_dump_pipe_config] [PLANE:40:primary C] disabled, scaler_id = 0
>[    1.695329] [drm:intel_dump_pipe_config] [PLANE:42:sprite C] disabled, scaler_id = 0
>[    1.695331] [drm:intel_dump_pipe_config] [PLANE:44:cursor C] disabled, scaler_id = 0
>[    1.695333] [drm:intel_modeset_setup_hw_state] LCPLL 810 enabled but not in use, disabling
>[    1.695336] [drm:intel_modeset_setup_hw_state] LCPLL 1350 enabled but not in use, disabling
>[    1.695338] [drm:intel_modeset_setup_hw_state] LCPLL 2700 enabled but not in use, disabling
>[    1.695426] [drm:i915_gem_init_ggtt] clearing unused GTT space: [1000, 80000000]
>[    1.697640] [drm:i915_ppgtt_create] Allocated pde space (2M) at GTT entry: 7fe00
>[    1.697642] [drm:i915_ppgtt_create] Adding PPGTT at offset 7fe00000
>[    1.697656] [drm:i915_gem_context_init] HW context support initialized
>[    1.697735] [drm:intel_init_ring_buffer] rcs hws offset: 0x00001000
>[    1.697742] [drm:intel_engine_create_scratch] rcs pipe control offset: 0x7fdee000
>[    1.697770] [drm:intel_init_ring_buffer] bcs hws offset: 0x00022000
>[    1.697796] [drm:intel_init_ring_buffer] vcs hws offset: 0x00043000
>[    1.697821] [drm:intel_init_ring_buffer] vecs hws offset: 0x00064000
>[    1.697852] [drm:init_workarounds_ring] rcs: Number of context specific w/a: 0
>[    1.697902] [drm:intel_init_gt_powersave] Overclocking supported, max: 1100MHz, overclock: 1100MHz
>[    1.697905] [drm:intel_fbdev_init] pipe A not active or no fb, skipping
>[    1.697907] [drm:intel_fbdev_init] pipe B not active or no fb, skipping
>[    1.697909] [drm:intel_fbdev_init] pipe C not active or no fb, skipping
>[    1.697910] [drm:intel_fbdev_init] no active fbs found, not using BIOS config
>[    1.698107] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered
>[    1.698111] [drm:intel_dp_connector_register] registering DPDDC-A bus for card0-eDP-1
>[    1.698146] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
>[    1.698236] [drm:intel_opregion_register] 2 outputs detected
>[    1.698313] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
>[    1.699093] ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
>[    1.699104] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20170119/psargs-363)
>[    1.699115] ACPI Error: Method parse/execution failed [\_SB.PCI0.RP05.PEGP.DD02._BCL] (Node ffff88025699bde8), AE_NOT_FOUND (20170119/psparse-543)
>[    1.699315] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:38/LNXVIDEO:00/input/input3
>[    1.700341] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    1.700463] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4
>[    1.700493] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
>[    1.700500] [drm:drm_setup_crtcs] 
>[    1.700505] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:eDP-1]
>[    1.700509] [drm:intel_dp_detect] [CONNECTOR:48:eDP-1]
>[    1.700512] [drm:intel_dp_detect] Display Port TPS3 support: source yes, sink no
>[    1.700515] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
>[    1.700517] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    1.700519] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    1.701029] ahci 0000:00:1f.2: version 3.0
>[    1.701461] [drm:intel_dp_read_desc] DP sink: OUI 00-e0-4c dev-ID  HW-rev 0.0 SW-rev 0.0
>[    1.702303] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:eDP-1] status updated from unknown to connected
>[    1.702321] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[    1.702325] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:eDP-1] probed modes :
>[    1.702329] [drm:drm_mode_debug_printmodeline] Modeline 49:"1366x768" 60 69300 1366 1374 1384 1462 768 771 772 790 0x48 0x9
>[    1.702332] [drm:drm_mode_debug_printmodeline] Modeline 50:"1366x768" 40 69300 1366 1374 1384 1786 768 771 772 968 0x40 0x9
>[    1.702335] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-1]
>[    1.702337] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-1]
>[    1.704264] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    1.704265] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    1.706266] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[    1.706269] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.708262] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    1.708263] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[    1.710298] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[    1.710302] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[    1.710306] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-1] status updated from unknown to disconnected
>[    1.710308] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-1] disconnected
>[    1.710311] [drm:drm_setup_crtcs] connector 48 enabled? yes
>[    1.710313] [drm:drm_setup_crtcs] connector 57 enabled? no
>[    1.710316] [drm:intel_fb_initial_config] Not using firmware configuration
>[    1.710319] [drm:drm_setup_crtcs] looking for cmdline mode on connector 48
>[    1.710320] [drm:drm_setup_crtcs] looking for preferred mode on connector 48 0
>[    1.710322] [drm:drm_setup_crtcs] found mode 1366x768
>[    1.710324] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
>[    1.710327] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 32 (0,0)
>[    1.710331] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    1.710786] [drm:intelfb_create] allocated 1366x768 fb: 0x00085000
>[    1.710845] fbcon: inteldrmfb (fb0) is primary device
>[    1.710919] [drm:intel_atomic_check] [CONNECTOR:48:eDP-1] checking for sink bpp constrains
>[    1.710921] [drm:intel_atomic_check] clamping display bpp (was 36) to EDID reported max of 18
>[    1.710925] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max bw 270000 pixel clock 69300KHz
>[    1.710928] [drm:intel_dp_compute_config] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18
>[    1.710930] [drm:intel_dp_compute_config] DP link bw required 155925 available 540000
>[    1.710933] [drm:intel_atomic_check] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[    1.710935] [drm:intel_dump_pipe_config] [CRTC:32:pipe A][modeset]
>[    1.710937] [drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 18, dithering: 1
>[    1.710939] [drm:intel_dump_pipe_config] dp m_n: lanes: 2; gmch_m: 2422210, gmch_n: 8388608, link_m: 134567, link_n: 524288, tu: 64
>[    1.710941] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    1.710942] [drm:intel_dump_pipe_config] requested mode:
>[    1.710946] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 69300 1366 1374 1384 1462 768 771 772 790 0x48 0x9
>[    1.710948] [drm:intel_dump_pipe_config] adjusted mode:
>[    1.710950] [drm:drm_mode_debug_printmodeline] Modeline 0:"1366x768" 60 69300 1366 1374 1384 1462 768 771 772 790 0x48 0x9
>[    1.710953] [drm:intel_dump_pipe_config] crtc timings: 69300 1366 1374 1384 1462 768 771 772 790, type: 0x48 flags: 0x9
>[    1.710955] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 1366x768, pixel rate 69300
>[    1.710957] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    1.710958] [drm:intel_dump_pipe_config] ips: 1, double wide: 0
>[    1.710961] [drm:hsw_dump_hw_state] dpll_hw_state: wrpll: 0x90280202 spll: 0x0
>[    1.710963] [drm:intel_dump_pipe_config] planes on this crtc
>[    1.710964] [drm:intel_dump_pipe_config] [PLANE:26:primary A] disabled, scaler_id = 0
>[    1.710966] [drm:intel_dump_pipe_config] [PLANE:28:sprite A] disabled, scaler_id = 0
>[    1.710968] [drm:intel_dump_pipe_config] [PLANE:30:cursor A] disabled, scaler_id = 0
>[    1.710974] [drm:intel_reference_shared_dpll] using LCPLL 1350 for pipe A
>[    1.710990] [drm:intel_edp_backlight_off.part.27] 
>[    1.711278] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode
>[    1.711281] ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst 
>[    1.711628] scsi host0: ahci
>[    1.711726] scsi host1: ahci
>[    1.711898] scsi host2: ahci
>[    1.711947] ata1: SATA max UDMA/133 abar m2048@0xc081b000 port 0xc081b100 irq 44
>[    1.711949] ata2: SATA max UDMA/133 abar m2048@0xc081b000 port 0xc081b180 irq 44
>[    1.711950] ata3: DUMMY
>[    1.712061] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    1.739953] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.739989] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.740274] mousedev: PS/2 mouse device common for all mice
>[    1.742865] rtc_cmos 00:01: RTC can wake from S4
>[    1.743091] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>[    1.743119] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
>[    1.743134] i2c /dev entries driver
>[    1.744150] i801_smbus 0000:00:1f.3: An interrupt is pending!
>[    1.744164] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[    1.773941] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
>[    1.811056] Driver for 1-wire Dallas network protocol.
>[    1.811425] intel_pstate: Intel P-state driver initializing
>[    1.811609] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.811971] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
>[    1.812338] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    1.812433] arp_tables: arp_tables: (C) 2002 David S. Miller
>[    1.812506] NET: Registered protocol family 10
>[    1.812710] Segment Routing with IPv6
>[    1.812725] NET: Registered protocol family 17
>[    1.812916] microcode: sig=0x40651, pf=0x40, revision=0x1f
>[    1.812966] microcode: Microcode Update Driver: v2.2.
>[    1.812972] AVX2 version of gcm_enc/dec engaged.
>[    1.812972] AES CTR mode by8 optimization enabled
>[    1.813589] registered taskstats version 1
>[    1.813602] zswap: loaded using pool lzo/zbud
>[    1.814075] rtc_cmos 00:01: setting system clock to 2017-04-26 16:10:34 UTC (1493223034)
>[    1.814113] PM: Hibernation image not present or could not be loaded.
>[    1.918334] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    1.918341] [drm:lpt_disable_backlight] cpu backlight was enabled, disabling
>[    1.918353] [drm:intel_disable_pipe] disabling pipe A
>[    1.926765] [drm:intel_edp_panel_off.part.25] Turn eDP port A panel power off
>[    1.926770] [drm:intel_edp_panel_off.part.25] Wait for panel power off time
>[    1.926779] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control 00000000
>[    1.978276] [drm:wait_panel_status] Wait complete
>[    1.978282] [drm:intel_disable_shared_dpll] disable WRPLL 1 (active 1, on? 1) for crtc 32
>[    1.978284] [drm:intel_disable_shared_dpll] disabling WRPLL 1
>[    1.978291] [drm:intel_atomic_commit_tail] [ENCODER:47:DDI A]
>[    1.978293] [drm:intel_atomic_commit_tail] [ENCODER:56:DDI B]
>[    1.978295] [drm:verify_single_dpll_state.isra.113] WRPLL 1
>[    1.978296] [drm:verify_single_dpll_state.isra.113] WRPLL 2
>[    1.978298] [drm:verify_single_dpll_state.isra.113] SPLL
>[    1.978300] [drm:verify_single_dpll_state.isra.113] LCPLL 810
>[    1.978301] [drm:verify_single_dpll_state.isra.113] LCPLL 1350
>[    1.978302] [drm:verify_single_dpll_state.isra.113] LCPLL 2700
>[    1.978304] [drm:intel_enable_shared_dpll] enable LCPLL 1350 (active 1, on? 0) for crtc 32
>[    1.978305] [drm:intel_enable_shared_dpll] enabling LCPLL 1350
>[    1.978314] [drm:edp_panel_on] Turn eDP port A panel power on
>[    1.978316] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    2.020330] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    2.020347] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    2.021165] ata1.00: ATA-9: WDC WD10JPVX-75JC3T0, 01.01A01, max UDMA/133
>[    2.021167] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    2.021962] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8E2, 1.01, max UDMA/133
>[    2.022073] ata1.00: configured for UDMA/133
>[    2.024379] ata2.00: configured for UDMA/133
>[    2.470326] tsc: Refined TSC clocksource calibration: 2394.456 MHz
>[    2.470334] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c236f90, max_idle_ns: 440795217409 ns
>[    2.534275] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000000
>[    2.534278] [drm:wait_panel_status] Wait complete
>[    2.534283] [drm:edp_panel_on] Wait for panel power on
>[    2.534290] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control 00000003
>[    2.736336] [drm:wait_panel_status] Wait complete
>[    2.736347] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    2.736354] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b
>[    2.738237] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    2.738239] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[    2.738240] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    2.738242] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS1
>[    2.739647] [drm:intel_dp_start_link_train] clock recovery OK
>[    2.739649] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS2
>[    2.741355] [drm:intel_dp_start_link_train] Channel EQ done. DP Training successful
>[    2.741397] [drm:intel_enable_pipe] enabling pipe A
>[    2.741820] [drm:intel_edp_backlight_on.part.26] 
>[    2.741822] [drm:intel_panel_enable_backlight] pipe A
>[    2.741828] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[    2.741833] [drm:intel_psr_enable] PSR not supported by this panel
>[    2.741835] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
>[    2.775294] [drm:intel_power_well_disable] disabling display
>[    2.775297] [drm:hsw_set_power_well.constprop.14] Requesting to disable the power well
>[    2.775300] [drm:verify_connector_state.isra.82] [CONNECTOR:48:eDP-1]
>[    2.775307] [drm:intel_atomic_commit_tail] [CRTC:32:pipe A]
>[    2.775317] [drm:verify_single_dpll_state.isra.113] LCPLL 1350
>[    2.793707] Console: switching to colour frame buffer device 170x48
>[    2.827168] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    2.828063] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JPVX-75J 1A01 PQ: 0 ANSI: 5
>[    2.828838] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[    2.828864] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    2.830053] sd 0:0:0:0: [sda] 4096-byte physical blocks
>[    2.830208] scsi 1:0:0:0: CD-ROM            MATSHITA DVD+-RW UJ8E2    1.01 PQ: 0 ANSI: 5
>[    2.831238] sd 0:0:0:0: [sda] Write Protect is off
>[    2.831851] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.831870] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.857691] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    2.858704] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    2.859603] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    2.859671] sr 1:0:0:0: Attached scsi generic sg1 type 5
>[    2.875045] psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4754]
>[    2.932810]  sda: sda1 sda2 sda3 sda4
>[    2.934986] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.960509] psmouse serio1: synaptics: queried min coordinates: x [1268..], y [1098..]
>[    2.998235] random: fast init done
>[    3.122393] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26c00/0x8173496a, board id: 2382, fw id: 1238635
>[    3.225443] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
>[    3.341853] EXT4-fs (sda4): couldn't mount as ext3 due to feature incompatibilities
>[    3.343145] EXT4-fs (sda4): couldn't mount as ext2 due to feature incompatibilities
>[    3.382431] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
>[    3.383091] VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
>[    3.421766] devtmpfs: mounted
>[    3.424198] Freeing unused kernel memory: 1404K
>[    3.424947] Write protecting the kernel read-only data: 14336k
>[    3.425875] Freeing unused kernel memory: 764K
>[    3.427461] Freeing unused kernel memory: 584K
>[    3.430396] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
>[    3.430407] [drm:sandybridge_pcode_read] warning: pcode (read) mailbox access failed: -6
>[    3.478469] clocksource: Switched to clocksource tsc
>[    4.074904] random: crng init done
>[    5.798333] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[    5.798340] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007
>[    9.612750] udevd[643]: starting version 3.2.1
>[   10.308981] udevd[644]: starting eudev-3.2.1
>[   10.508361] wmi: Mapper loaded
>[   10.735901] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>[   10.748673] ACPI: bus type USB registered
>[   10.748689] usbcore: registered new interface driver usbfs
>[   10.748697] usbcore: registered new interface driver hub
>[   10.748723] usbcore: registered new device driver usb
>[   10.808758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[   10.842567] ehci-pci: EHCI PCI platform driver
>[   10.842775] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[   10.842783] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
>[   10.842795] ehci-pci 0000:00:1d.0: debug port 2
>[   10.846707] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[   10.846716] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc081c000
>[   10.853464] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[   10.853697] hub 1-0:1.0: USB hub found
>[   10.853702] hub 1-0:1.0: 2 ports detected
>[   10.889220] iTCO_vendor_support: vendor-support=0
>[   10.902198] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[   10.902208] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[   10.903275] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
>[   10.903278] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[   10.903527] hub 2-0:1.0: USB hub found
>[   10.903537] hub 2-0:1.0: 9 ports detected
>[   10.905411] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[   10.905414] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[   10.905545] hub 3-0:1.0: USB hub found
>[   10.905562] hub 3-0:1.0: 4 ports detected
>[   10.983693] [drm] amdgpu kernel modesetting enabled.
>[   10.983706] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
>[   10.983785] ATPX version 1, functions 0x00000033
>[   10.983864] amdgpu 0000:03:00.0: enabling device (0000 -> 0003)
>[   10.983982] [drm] initializing kernel modesetting (VERDE 0x1002:0x6823 0x1028:0x05EB 0x00).
>[   10.983984] amdgpu 0000:03:00.0: VM size (-1) must be a power of 2
>[   10.983992] [drm] register mmio base: 0xC0500000
>[   10.983993] [drm] register mmio size: 262144
>[   10.983997] vga_switcheroo: enabled
>[   10.990840] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[   10.990867] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[   10.990942] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   10.991986] ATOM BIOS: BR44591.001
>[   10.991993] [drm] GPU post is not needed
>[   10.992426] [drm] vm size is 64 GB, block size is 13-bit
>[   11.074851] amdgpu 0000:03:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
>[   11.074853] amdgpu 0000:03:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
>[   11.074863] [drm] Detected VRAM RAM=2048M, BAR=256M
>[   11.074864] [drm] RAM width 128bits GDDR5
>[   11.074990] [TTM] Zone  kernel: Available graphics memory: 4030216 kiB
>[   11.074992] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[   11.074992] [TTM] Initializing pool allocator
>[   11.074996] [TTM] Initializing DMA pool allocator
>[   11.075021] [drm] amdgpu: 2048M of VRAM memory ready
>[   11.075022] [drm] amdgpu: 2048M of GTT memory ready.
>[   11.075032] [drm] GART: num cpu pages 524288, num gpu pages 524288
>[   11.076809] amdgpu 0000:03:00.0: PCIE GART of 2048M enabled (table at 0x0000000000040000).
>[   11.076826] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[   11.076827] [drm] Driver supports precise vblank timestamp query.
>[   11.076863] amdgpu 0000:03:00.0: amdgpu: using MSI.
>[   11.076882] [drm] amdgpu: irq initialized.
>[   11.100794] [drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
>[   11.100822] [drm] Internal thermal controller without fan control
>[   11.100834] [drm] amdgpu: dpm initialized
>[   11.100866] [drm] AMDGPU Display Connectors
>[   11.166469] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[   11.180466] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[   11.180474] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
>[   11.180917] r8169 0000:01:00.0 eth0: RTL8106e at 0xffffc90000c94000, ec:f4:bb:8a:8d:91, XID 04900000 IRQ 47
>[   11.181472] r8169 0000:01:00.0 enp1s0: renamed from eth0
>[   11.197278] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops)
>[   11.198318] [drm:intel_power_well_enable] enabling display
>[   11.198321] [drm:hsw_set_power_well.constprop.14] Enabling power well
>[   11.210465] [drm:i915_audio_component_get_eld] Not valid for port B
>[   11.210468] [drm:i915_audio_component_get_eld] Not valid for port B
>[   11.210469] [drm:i915_audio_component_get_eld] Not valid for port B
>[   11.210471] [drm:i915_audio_component_get_eld] Not valid for port C
>[   11.210472] [drm:i915_audio_component_get_eld] Not valid for port C
>[   11.210474] [drm:i915_audio_component_get_eld] Not valid for port C
>[   11.210475] [drm:i915_audio_component_get_eld] Not valid for port D
>[   11.210476] [drm:i915_audio_component_get_eld] Not valid for port D
>[   11.210478] [drm:i915_audio_component_get_eld] Not valid for port D
>[   11.211099] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input8
>[   11.211162] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input9
>[   11.211222] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input10
>[   11.211279] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card1/input11
>[   11.211344] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card1/input12
>[   11.266469] usb 2-1: new low-speed USB device number 2 using xhci_hcd
>[   11.285060] hub 1-1:1.0: USB hub found
>[   11.285143] hub 1-1:1.0: 8 ports detected
>[   11.362765] amdgpu 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000010, cpu addr 0xffff880250a1a010
>[   11.362860] amdgpu 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000020, cpu addr 0xffff880250a1a020
>[   11.362957] amdgpu 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000030, cpu addr 0xffff880250a1a030
>[   11.363056] amdgpu 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000040, cpu addr 0xffff880250a1a040
>[   11.363150] amdgpu 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000050, cpu addr 0xffff880250a1a050
>[   11.363309] [drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
>[   11.363312] [drm] PCIE gen 2 link speeds already enabled
>[   11.373805] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2)
>[   11.373856] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2)
>[   11.373901] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2)
>[   11.373942] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2)
>[   11.373976] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2)
>[   11.374011] [drm:dce_v6_0_pageflip_irq [amdgpu]] amdgpu_crtc->pflip_status = 0 != AMDGPU_FLIP_SUBMITTED(2)
>[   11.423368] intel_rapl: Found RAPL domain package
>[   11.423369] intel_rapl: Found RAPL domain core
>[   11.423370] intel_rapl: Found RAPL domain uncore
>[   11.423371] intel_rapl: Found RAPL domain dram
>[   11.423373] intel_rapl: RAPL package 0 domain package locked by BIOS
>[   11.558426] usb 1-1.5: new full-speed USB device number 3 using ehci-pci
>[   11.594139] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C31C.0001/input/input13
>[   11.598424] usb 2-2: new full-speed USB device number 3 using xhci_hcd
>[   11.622265] [drm] ring test on 0 succeeded in 10 usecs
>[   11.624278] [drm] ring test on 1 succeeded in 1 usecs
>[   11.624286] [drm] ring test on 2 succeeded in 2 usecs
>[   11.624293] [drm] ring test on 3 succeeded in 4 usecs
>[   11.624301] [drm] ring test on 4 succeeded in 5 usecs
>[   11.624539] [drm] ib test on ring 0 succeeded
>[   11.624585] [drm] ib test on ring 1 succeeded
>[   11.624644] [drm] ib test on ring 2 succeeded
>[   11.624676] [drm] ib test on ring 3 succeeded
>[   11.624714] [drm] ib test on ring 4 succeeded
>[   11.645563] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-1/input0
>[   11.651030] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/0003:046D:C31C.0002/input/input14
>[   11.702501] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-1/input1
>[   11.702532] usbcore: registered new interface driver usbhid
>[   11.702533] usbhid: USB HID core driver
>[   11.703407] usb 1-1.7: new high-speed USB device number 4 using ehci-pci
>[   11.758498] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3223: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[   11.758500] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   11.758501] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[   11.758502] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[   11.758503] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[   11.758504] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
>[   11.758506] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
>[   11.758506] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
>[   11.769254] input: Areson USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:E0FF:0005.0003/input/input15
>[   11.769344] hid-generic 0003:E0FF:0005.0003: input,hidraw2: USB HID v1.00 Mouse [Areson USB Device] on usb-0000:00:14.0-2/input0
>[   11.771156] input: Areson USB Device as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:E0FF:0005.0004/input/input16
>[   11.822604] hid-generic 0003:E0FF:0005.0004: input,hiddev0,hidraw3: USB HID v1.00 Keyboard [Areson USB Device] on usb-0000:00:14.0-2/input1
>[   11.846407] usb 1-1.8: new high-speed USB device number 5 using ehci-pci
>[   11.942422] [drm:drm_fb_helper_hotplug_event] 
>[   11.942424] [drm:drm_setup_crtcs] 
>[   11.942427] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:eDP-1]
>[   11.942431] [drm:intel_dp_detect] [CONNECTOR:48:eDP-1]
>[   11.942434] [drm:intel_dp_detect] Display Port TPS3 support: source yes, sink no
>[   11.942437] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
>[   11.942439] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[   11.942442] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[   11.942447] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[   11.942457] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f
>[   11.943399] [drm:intel_dp_read_desc] DP sink: OUI 00-e0-4c dev-ID  HW-rev 0.0 SW-rev 0.0
>[   11.944299] [drm:drm_edid_to_eld] ELD: no CEA Extension found
>[   11.944304] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:48:eDP-1] probed modes :
>[   11.944306] [drm:drm_mode_debug_printmodeline] Modeline 49:"1366x768" 60 69300 1366 1374 1384 1462 768 771 772 790 0x48 0x9
>[   11.944309] [drm:drm_mode_debug_printmodeline] Modeline 50:"1366x768" 40 69300 1366 1374 1384 1786 768 771 772 968 0x40 0x9
>[   11.944311] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-1]
>[   11.944313] [drm:intel_hdmi_detect] [CONNECTOR:57:HDMI-A-1]
>[   11.945413] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   11.945415] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   11.947413] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
>[   11.947415] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   11.949414] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   11.949416] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK on first message, retry
>[   11.951414] [drm:gmbus_xfer] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
>[   11.951416] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[   11.951418] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:57:HDMI-A-1] disconnected
>[   11.951420] [drm:drm_setup_crtcs] connector 48 enabled? yes
>[   11.951422] [drm:drm_setup_crtcs] connector 57 enabled? no
>[   11.951425] [drm:intel_fb_initial_config] Not using firmware configuration
>[   11.951426] [drm:drm_setup_crtcs] looking for cmdline mode on connector 48
>[   11.951428] [drm:drm_setup_crtcs] looking for preferred mode on connector 48 0
>[   11.951429] [drm:drm_setup_crtcs] found mode 1366x768
>[   11.951431] [drm:drm_setup_crtcs] picking CRTCs for 1366x768 config
>[   11.951435] [drm:drm_setup_crtcs] desired mode 1366x768 set on crtc 32 (0,0)
>[   11.962858] usbcore: registered new interface driver rtsx_usb
>[   11.994287] Bluetooth: Core ver 2.22
>[   11.994300] NET: Registered protocol family 31
>[   11.994301] Bluetooth: HCI device and connection manager initialized
>[   11.994304] Bluetooth: HCI socket layer initialized
>[   11.994305] Bluetooth: L2CAP socket layer initialized
>[   11.994317] Bluetooth: SCO socket layer initialized
>[   12.111531] [drm:amdgpu_acpi_init [amdgpu]] Call to ATCS verify_interface failed: -5
>[   12.111563] [drm:amdgpu_acpi_init [amdgpu]] Call to ATIF verify_interface failed: -5
>[   12.111577] [drm] Initialized amdgpu 3.13.0 20150101 for 0000:03:00.0 on minor 1
>[   12.190906] usbcore: registered new interface driver btusb
>[   12.305173] Bluetooth: hci0: BCM: chip id 70
>[   12.321175] Bluetooth: hci0: BCM43142A
>[   12.321179] Bluetooth: hci0: BCM (001.001.011) build 0000
>[   12.592096] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
>[   12.976079] Bluetooth: hci0: BCM (001.001.011) build 0036
>[   12.992160] Bluetooth: hci0: Dell Wireless 1704 Bluetooth v4.0+HS
>[   13.151450] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=281/937
>[   13.151453] [drm:intel_panel_actually_set_backlight] set backlight PWM = 315
>[   13.437868] EXT4-fs (sda4): re-mounted. Opts: (null)
>[   13.614095] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[   14.643590] r8169 0000:01:00.0 enp1s0: link down
>[   14.643592] r8169 0000:01:00.0 enp1s0: link down
>[   14.643646] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
>[   14.950525] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[   14.950532] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007
>[   16.296939] r8169 0000:01:00.0 enp1s0: link up
>[   16.296948] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready

Actions: View

Attachments on bug 100755: 130972 | 130973 | 130979 | 130986 | 131053 | 131054 | 131098

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.