Attachment 132825 Details for Bug 101865 – dmesg output

dmesg output

dmesg.out (text/plain), 116.56 KB, created by nutrinfnon on 2017-07-22 05:46:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: nutrinfnon

Created: 2017-07-22 05:46:14 UTC

Size: 116.56 KB

patch

obsolete

>[    0.014006] process: using mwait in idle threads
>[    0.014009] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
>[    0.014009] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
>[    0.014095] Freeing SMP alternatives memory: 16K
>[    0.022709] smpboot: Max logical packages: 1
>[    0.023083] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.064000] smpboot: CPU0: Intel(R) Celeron(R) CPU G1820 @ 2.70GHz (family: 0x6, model: 0x3c, stepping: 0x3)
>[    0.064000] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
>[    0.064000] ... version:                3
>[    0.064000] ... bit width:              48
>[    0.064000] ... generic registers:      8
>[    0.064000] ... value mask:             0000ffffffffffff
>[    0.064000] ... max period:             00007fffffffffff
>[    0.064000] ... fixed-purpose events:   3
>[    0.064000] ... event mask:             00000007000000ff
>[    0.064000] Hierarchical SRCU implementation.
>[    0.064000] smp: Bringing up secondary CPUs ...
>[    0.064000] x86: Booting SMP configuration:
>[    0.064000] .... node  #0, CPUs:      #1
>[    0.140018] smp: Brought up 1 node, 2 CPUs
>[    0.140018] smpboot: Total of 2 processors activated (10775.16 BogoMIPS)
>[    0.140032] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.141092] devtmpfs: initialized
>[    0.141092] x86/mm: Memory block size: 128MB
>[    0.141092] PM: Registering ACPI NVS region [mem 0x602fe000-0x60304fff] (28672 bytes)
>[    0.141092] PM: Registering ACPI NVS region [mem 0x778d0000-0x77e0bfff] (5488640 bytes)
>[    0.141092] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.141092] futex hash table entries: 512 (order: 3, 32768 bytes)
>[    0.141092] pinctrl core: initialized pinctrl subsystem
>[    0.141092] NET: Registered protocol family 16
>[    0.141092] cpuidle: using governor ladder
>[    0.141092] cpuidle: using governor menu
>[    0.141092] PCCT header not found.
>[    0.141092] ACPI: bus type PCI registered
>[    0.141092] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.141092] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.141092] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.141092] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
>[    0.141092] PCI: Using configuration type 1 for base access
>[    0.141092] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.141092] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
>[    0.141092] mtrr: your CPUs had inconsistent fixed MTRR settings
>[    0.141092] mtrr: probably your BIOS does not setup all CPUs.
>[    0.141092] mtrr: corrected configuration.
>[    0.141092] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
>[    0.141092] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.141092] ACPI: Added _OSI(Module Device)
>[    0.141092] ACPI: Added _OSI(Processor Device)
>[    0.141092] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.141092] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.141092] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.146318] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.146628] ACPI: Dynamic OEM Table Load:
>[    0.146628] ACPI: SSDT 0xFFFF880100D3E800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
>[    0.146630] ACPI: Dynamic OEM Table Load:
>[    0.146630] ACPI: SSDT 0xFFFF88010008B800 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
>[    0.146630] ACPI: Dynamic OEM Table Load:
>[    0.146630] ACPI: SSDT 0xFFFF880100D14600 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
>[    0.146630] ACPI: Interpreter enabled
>[    0.146630] ACPI: (supports S0 S3 S4 S5)
>[    0.146630] ACPI: Using IOAPIC for interrupt routing
>[    0.146630] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.155955] ACPI: Power Resource [FN00] (off)
>[    0.156028] ACPI: Power Resource [FN01] (off)
>[    0.156097] ACPI: Power Resource [FN02] (off)
>[    0.156165] ACPI: Power Resource [FN03] (off)
>[    0.156234] ACPI: Power Resource [FN04] (off)
>[    0.156959] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.156962] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.157431] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.157741] PCI host bridge to bus 0000:00
>[    0.157743] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.157744] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.157746] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.157747] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
>[    0.157748] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
>[    0.157749] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
>[    0.157750] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
>[    0.157751] pci_bus 0000:00: root bus resource [mem 0x7e200000-0xfeafffff window]
>[    0.157753] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.157758] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
>[    0.157837] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
>[    0.157866] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.157968] pci 0000:00:02.0: [8086:0402] type 00 class 0x030000
>[    0.157978] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
>[    0.157983] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.157987] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
>[    0.158073] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
>[    0.158090] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
>[    0.158141] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.158204] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
>[    0.158222] pci 0000:00:16.0: reg 0x10: [mem 0xf7e19000-0xf7e1900f 64bit]
>[    0.158276] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.158344] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
>[    0.158362] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e17000-0xf7e173ff]
>[    0.158434] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.158500] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
>[    0.158517] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
>[    0.158576] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.158643] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
>[    0.158701] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.158801] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
>[    0.158859] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.158957] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
>[    0.159015] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.159119] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
>[    0.159138] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e16000-0xf7e163ff]
>[    0.159210] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.159278] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
>[    0.159429] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
>[    0.159444] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e15000-0xf7e150ff 64bit]
>[    0.159461] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
>[    0.159558] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.159603] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.159666] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
>[    0.159699] pci 0000:03:00.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
>[    0.159816] pci 0000:03:00.0: supports D1
>[    0.159817] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
>[    0.168030] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.168034] pci 0000:00:1c.1:   bridge window [mem 0xf7d00000-0xf7dfffff]
>[    0.168096] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
>[    0.168124] pci 0000:04:00.0: reg 0x10: [io  0xe000-0xe0ff]
>[    0.168150] pci 0000:04:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
>[    0.168166] pci 0000:04:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
>[    0.168253] pci 0000:04:00.0: supports D1 D2
>[    0.168254] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.180031] pci 0000:00:1c.2: PCI bridge to [bus 04]
>[    0.180033] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
>[    0.180036] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
>[    0.180040] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
>[    0.180566] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>[    0.180606] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>[    0.180644] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>[    0.180681] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>[    0.180719] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>[    0.180756] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>[    0.180794] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
>[    0.180831] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>[    0.181149] ACPI: Enabled 5 GPEs in block 00 to 3F
>[    0.181199] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    0.181199] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.181199] pci 0000:00:02.0: vgaarb: bridge control possible
>[    0.181199] vgaarb: loaded
>[    0.181199] EDAC MC: Ver: 3.0.0
>[    0.181199] Registered efivars operations
>[    0.184640] PCI: Using ACPI for IRQ routing
>[    0.185858] PCI: pci_cache_line_size set to 64 bytes
>[    0.185890] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.185891] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    0.185892] e820: reserve RAM buffer [mem 0x602fe000-0x63ffffff]
>[    0.185893] e820: reserve RAM buffer [mem 0x60750000-0x63ffffff]
>[    0.185894] e820: reserve RAM buffer [mem 0x776b2000-0x77ffffff]
>[    0.185895] e820: reserve RAM buffer [mem 0x79000000-0x7bffffff]
>[    0.185896] e820: reserve RAM buffer [mem 0x100e00000-0x103ffffff]
>[    0.185989] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.185989] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.188012] clocksource: Switched to clocksource hpet
>[    0.192733] VFS: Disk quotas dquot_6.6.0
>[    0.192749] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.192817] pnp: PnP ACPI init
>[    0.192916] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
>[    0.192919] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.193056] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.193057] system 00:01: [io  0xffff] has been reserved
>[    0.193058] system 00:01: [io  0xffff] has been reserved
>[    0.193059] system 00:01: [io  0xffff] has been reserved
>[    0.193060] system 00:01: [io  0x1c00-0x1cfe] has been reserved
>[    0.193061] system 00:01: [io  0x1d00-0x1dfe] has been reserved
>[    0.193063] system 00:01: [io  0x1e00-0x1efe] has been reserved
>[    0.193064] system 00:01: [io  0x1f00-0x1ffe] has been reserved
>[    0.193065] system 00:01: [io  0x1800-0x18fe] has been reserved
>[    0.193066] system 00:01: [io  0x164e-0x164f] has been reserved
>[    0.193068] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.193088] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.193124] system 00:03: [io  0x1854-0x1857] has been reserved
>[    0.193126] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.193189] system 00:04: [io  0x0290-0x029f] has been reserved
>[    0.193190] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.193227] system 00:05: [io  0x04d0-0x04d1] has been reserved
>[    0.193228] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.193572] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.193574] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.193575] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.193576] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.193577] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.193578] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.193580] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.193581] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.193582] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
>[    0.193584] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    0.193585] system 00:06: [mem 0xf7fef000-0xf7feffff] has been reserved
>[    0.193586] system 00:06: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
>[    0.193588] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.193801] pnp: PnP ACPI: found 7 devices
>[    0.199639] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.199652] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
>[    0.199654] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
>[    0.199655] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
>[    0.199672] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7e200000-0x7e3fffff]
>[    0.199677] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7e400000-0x7e5fffff 64bit pref]
>[    0.199679] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
>[    0.199680] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.199686] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.199687] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>[    0.199691] pci 0000:00:1c.0:   bridge window [mem 0x7e200000-0x7e3fffff]
>[    0.199693] pci 0000:00:1c.0:   bridge window [mem 0x7e400000-0x7e5fffff 64bit pref]
>[    0.199697] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.199701] pci 0000:00:1c.1:   bridge window [mem 0xf7d00000-0xf7dfffff]
>[    0.199706] pci 0000:00:1c.2: PCI bridge to [bus 04]
>[    0.199708] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
>[    0.199711] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
>[    0.199714] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
>[    0.199718] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.199720] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.199720] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.199721] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
>[    0.199722] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
>[    0.199723] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
>[    0.199724] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
>[    0.199725] pci_bus 0000:00: resource 11 [mem 0x7e200000-0xfeafffff window]
>[    0.199726] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
>[    0.199727] pci_bus 0000:02: resource 1 [mem 0x7e200000-0x7e3fffff]
>[    0.199728] pci_bus 0000:02: resource 2 [mem 0x7e400000-0x7e5fffff 64bit pref]
>[    0.199729] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
>[    0.199730] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
>[    0.199731] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
>[    0.199732] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
>[    0.199813] NET: Registered protocol family 2
>[    0.199932] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.199968] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
>[    0.200023] TCP: Hash tables configured (established 16384 bind 16384)
>[    0.200045] UDP hash table entries: 1024 (order: 3, 32768 bytes)
>[    0.200053] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>[    0.200091] NET: Registered protocol family 1
>[    0.200103] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.248085] PCI: CLS 64 bytes, default 64
>[    0.248116] Unpacking initramfs...
>[    0.369209] Freeing initrd memory: 8656K
>[    0.369215] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.369217] software IO TLB [mem 0x63200000-0x67200000] (64MB) mapped at [ffff880063200000-ffff8800671fffff]
>[    0.369286] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
>[    0.369287] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>[    0.369288] RAPL PMU: hw unit of domain package 2^-14 Joules
>[    0.369288] RAPL PMU: hw unit of domain dram 2^-14 Joules
>[    0.369289] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>[    0.369563] audit: initializing netlink subsys (disabled)
>[    0.369606] audit: type=2000 audit(1500711322.369:1): state=initialized audit_enabled=0 res=1
>[    0.369908] workingset: timestamp_bits=56 max_order=19 bucket_order=0
>[    0.370276] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
>[    0.370295] io scheduler noop registered
>[    0.370296] io scheduler deadline registered
>[    0.370300] io scheduler cfq registered (default)
>[    0.370301] io scheduler mq-deadline registered
>[    0.370301] io scheduler kyber registered
>[    0.370845] pcieport 0000:00:01.0: Signaling PME with IRQ 24
>[    0.370860] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
>[    0.370874] pcieport 0000:00:1c.1: Signaling PME with IRQ 26
>[    0.370888] pcieport 0000:00:1c.2: Signaling PME with IRQ 27
>[    0.370899] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
>[    0.370925] efifb: probing for efifb
>[    0.370935] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
>[    0.370936] efifb: mode is 1024x768x32, linelength=4096, pages=1
>[    0.370936] efifb: scrolling: redraw
>[    0.370937] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.372910] Console: switching to colour frame buffer device 128x48
>[    0.374787] fb0: EFI VGA frame buffer device
>[    0.374792] intel_idle: MWAIT substates: 0x2120
>[    0.374792] intel_idle: v0.4.1 model 0x3C
>[    0.374844] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.374910] GHES: HEST is not enabled!
>[    0.374955] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.375429] i8042: PNP: No PS/2 controller found.
>[    0.375492] mousedev: PS/2 mouse device common for all mice
>[    0.375515] rtc_cmos 00:02: RTC can wake from S4
>[    0.375627] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    0.375649] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    0.375663] intel_pstate: Intel P-state driver initializing
>[    0.375783] drop_monitor: Initializing network drop monitor service
>[    0.375987] NET: Registered protocol family 10
>[    0.376466] Segment Routing with IPv6
>[    0.376504] mip6: Mobile IPv6
>[    0.376507] NET: Registered protocol family 17
>[    0.376523] Key type dns_resolver registered
>[    0.376930] microcode: sig=0x306c3, pf=0x2, revision=0x9
>[    0.377053] microcode: Microcode Update Driver: v2.2.
>[    0.377072] sched_clock: Marking stable (377041776, 0)->(479575247, -102533471)
>[    0.377491] registered taskstats version 1
>[    0.378300] rtc_cmos 00:02: setting system clock to 2017-07-22 08:15:23 UTC (1500711323)
>[    0.378443] PM: Hibernation image not present or could not be loaded.
>[    0.381369] Freeing unused kernel memory: 1004K
>[    0.381372] Write protecting the kernel read-only data: 8192k
>[    0.382425] Freeing unused kernel memory: 1736K
>[    0.383382] Freeing unused kernel memory: 116K
>[    0.488184] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    0.488309] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.488310] ACPI: Thermal Zone [TZ00] (28 C)
>[    0.488769] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.488770] ACPI: Thermal Zone [TZ01] (30 C)
>[    0.490020] ACPI: bus type USB registered
>[    0.490037] usbcore: registered new interface driver usbfs
>[    0.490044] usbcore: registered new interface driver hub
>[    0.490061] usbcore: registered new device driver usb
>[    0.490767] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.490771] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    0.491829] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
>[    0.491833] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    0.491899] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.491900] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.491901] usb usb1: Product: xHCI Host Controller
>[    0.491902] usb usb1: Manufacturer: Linux 4.13.0-rc1 xhci-hcd
>[    0.491903] usb usb1: SerialNumber: 0000:00:14.0
>[    0.492032] hub 1-0:1.0: USB hub found
>[    0.492041] hub 1-0:1.0: 10 ports detected
>[    0.493051] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.493053] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    0.493076] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
>[    0.493077] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.493078] usb usb2: Product: xHCI Host Controller
>[    0.493078] usb usb2: Manufacturer: Linux 4.13.0-rc1 xhci-hcd
>[    0.493079] usb usb2: SerialNumber: 0000:00:14.0
>[    0.493721] hub 2-0:1.0: USB hub found
>[    0.493727] hub 2-0:1.0: 2 ports detected
>[    0.494449] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.494625] ehci-pci: EHCI PCI platform driver
>[    0.494679] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    0.494757] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    0.494761] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
>[    0.494770] ehci-pci 0000:00:1a.0: debug port 2
>[    0.498655] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    0.498759] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7e17000
>[    0.508892] r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0xffffc90000351000, e0:3f:49:0d:d3:c9, XID 0c000800 IRQ 29
>[    0.508894] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>[    0.509820] r8169 0000:04:00.0 enp4s0: renamed from eth0
>[    0.512061] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    0.512089] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.512090] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.512091] usb usb3: Product: EHCI Host Controller
>[    0.512092] usb usb3: Manufacturer: Linux 4.13.0-rc1 ehci_hcd
>[    0.512092] usb usb3: SerialNumber: 0000:00:1a.0
>[    0.512193] hub 3-0:1.0: USB hub found
>[    0.512197] hub 3-0:1.0: 2 ports detected
>[    0.512407] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    0.512411] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
>[    0.512419] ehci-pci 0000:00:1d.0: debug port 2
>[    0.516324] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    0.516334] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e16000
>[    0.532041] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    0.532082] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.532084] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.532085] usb usb4: Product: EHCI Host Controller
>[    0.532086] usb usb4: Manufacturer: Linux 4.13.0-rc1 ehci_hcd
>[    0.532087] usb usb4: SerialNumber: 0000:00:1d.0
>[    0.532316] hub 4-0:1.0: USB hub found
>[    0.532322] hub 4-0:1.0: 2 ports detected
>[    0.532608] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[    0.553163] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com
>[    0.562888] CPU feature 'AVX registers' is not supported.
>[    0.820245] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
>[    0.843982] usb 3-1: new high-speed USB device number 2 using ehci-pci
>[    0.845707] usb 2-2: New USB device found, idVendor=05dc, idProduct=a838
>[    0.845709] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    0.845710] usb 2-2: Product: USB Flash Drive
>[    0.845711] usb 2-2: Manufacturer: Lexar
>[    0.845711] usb 2-2: SerialNumber: AAHS4Y6S3JPP1D9D
>[    0.850873] SCSI subsystem initialized
>[    0.851474] usb-storage 2-2:1.0: USB Mass Storage device detected
>[    0.856035] scsi host0: usb-storage 2-2:1.0
>[    0.856338] usbcore: registered new interface driver usb-storage
>[    0.863986] usb 4-1: new high-speed USB device number 2 using ehci-pci
>[    0.960019] usb 1-10: new low-speed USB device number 2 using xhci_hcd
>[    0.992608] usb 3-1: New USB device found, idVendor=8087, idProduct=8008
>[    0.992611] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    0.992971] hub 3-1:1.0: USB hub found
>[    0.993041] hub 3-1:1.0: 4 ports detected
>[    1.012759] usb 4-1: New USB device found, idVendor=8087, idProduct=8000
>[    1.012764] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.013258] hub 4-1:1.0: USB hub found
>[    1.013427] hub 4-1:1.0: 6 ports detected
>[    1.103562] usb 1-10: New USB device found, idVendor=13ba, idProduct=0018
>[    1.103567] usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    1.103571] usb 1-10: Product: Barcode Reader 
>[    1.113875] usbcore: registered new interface driver usbhid
>[    1.113876] usbhid: USB HID core driver
>[    1.114516] input: Barcode Reader  as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:13BA:0018.0001/input/input0
>[    1.172145] hid-generic 0003:13BA:0018.0001: input: USB HID v1.10 Keyboard [Barcode Reader ] on usb-0000:00:14.0-10/input0
>[    1.172554] input: Barcode Reader  as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:13BA:0018.0002/input/input1
>[    1.232263] hid-generic 0003:13BA:0018.0002: input: USB HID v1.10 Mouse [Barcode Reader ] on usb-0000:00:14.0-10/input1
>[    1.376005] tsc: Refined TSC clocksource calibration: 2693.761 MHz
>[    1.376015] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d438c619d, max_idle_ns: 440795237946 ns
>[    2.015743] scsi 0:0:0:0: Direct-Access     Lexar    USB Flash Drive  1100 PQ: 0 ANSI: 6
>[    2.031738] sd 0:0:0:0: [sda] 62517248 512-byte logical blocks: (32.0 GB/29.8 GiB)
>[    2.032215] sd 0:0:0:0: [sda] Write Protect is off
>[    2.032220] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
>[    2.032698] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.040841]  sda: sda1 sda2 sda3 sda4 sda5
>[    2.042692] sd 0:0:0:0: [sda] Attached SCSI removable disk
>[    2.400256] clocksource: Switched to clocksource tsc
>[    5.059789] PM: Starting manual resume from disk
>[    5.059793] PM: Hibernation image partition 254:1 present
>[    5.059793] PM: Looking for hibernation image.
>[    5.060446] PM: Image not found (code -22)
>[    5.060448] PM: Hibernation image not present or could not be loaded.
>[    5.064443] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[    5.064446] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
>[    5.064448] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
>[    5.064452] PM: Marking nosave pages: [mem 0x602fe000-0x60304fff]
>[    5.064453] PM: Marking nosave pages: [mem 0x60750000-0x60b67fff]
>[    5.064485] PM: Marking nosave pages: [mem 0x776b2000-0x78ffefff]
>[    5.064667] PM: Marking nosave pages: [mem 0x79000000-0xffffffff]
>[    5.068858] PM: Basic memory bitmaps created
>[    5.070095] PM: Basic memory bitmaps freed
>[    5.217776] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
>[    5.685479] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
>[    5.743470] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    5.782712] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
>[    5.782891] systemd[1]: Detected architecture x86-64.
>[    5.784141] systemd[1]: Set hostname to <usbk>.
>[    6.189476] systemd[1]: ModemManager.service: Cannot add dependency job, ignoring: Unit ModemManager.service is masked.
>[    6.190671] systemd[1]: Reached target Remote File Systems.
>[    6.190918] systemd[1]: Listening on udev Control Socket.
>[    6.191009] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
>[    6.191111] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
>[    6.191184] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    6.191211] systemd[1]: Reached target Encrypted Volumes.
>[    6.245415] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
>[    6.254286] lp: driver loaded but no devices found
>[    6.262470] ppdev: user-space parallel port driver
>[    6.291871] systemd-journald[253]: Received request to flush runtime journal from PID 1
>[    6.931858] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>[    6.931868] ACPI: Power Button [PWRB]
>[    6.931909] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>[    6.931917] ACPI: Power Button [PWRF]
>[    7.011785] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
>[    7.011788] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    7.011789] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[    7.011790] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[    7.011790] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
>[    7.011791] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[    7.011793] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
>[    7.011794] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
>[    7.011795] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
>[    7.030120] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
>[    7.030144] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
>[    7.030166] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
>[    7.030187] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>[    7.030209] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>[    7.032761] input: PC Speaker as /devices/platform/pcspkr/input/input9
>[    7.054095] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170531/utaddress-247)
>[    7.054100] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    7.054102] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247)
>[    7.054105] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    7.054106] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170531/utaddress-247)
>[    7.054108] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247)
>[    7.054110] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    7.054111] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170531/utaddress-247)
>[    7.054113] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247)
>[    7.054115] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    7.054116] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    7.073297] [drm:i915_driver_load [i915]] Found LynxPoint PCH
>[    7.073333] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00
>[    7.073381] [drm:intel_device_info_dump [i915]] i915 device info: platform=HASWELL gen=7 pciid=0x0402 rev=0x06
>[    7.073413] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: no
>[    7.073446] [drm:intel_device_info_dump [i915]] i915 device info: is_lp: no
>[    7.073478] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: no
>[    7.073510] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: no
>[    7.073542] [drm:intel_device_info_dump [i915]] i915 device info: has_aliasing_ppgtt: yes
>[    7.073573] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: no
>[    7.073605] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: yes
>[    7.073637] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: yes
>[    7.073669] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: yes
>[    7.073701] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: yes
>[    7.073732] [drm:intel_device_info_dump [i915]] i915 device info: has_full_ppgtt: yes
>[    7.073763] [drm:intel_device_info_dump [i915]] i915 device info: has_full_48bit_ppgtt: no
>[    7.073795] [drm:intel_device_info_dump [i915]] i915 device info: has_gmbus_irq: yes
>[    7.073827] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: no
>[    7.073859] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: no
>[    7.073890] [drm:intel_device_info_dump [i915]] i915 device info: has_guc_ct: no
>[    7.073922] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes
>[    7.073954] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: yes
>[    7.073986] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: yes
>[    7.074014] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: no
>[    7.074042] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no
>[    7.074069] [drm:intel_device_info_dump [i915]] i915 device info: has_pipe_cxsr: no
>[    7.074096] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no
>[    7.074122] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: yes
>[    7.074148] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes
>[    7.074174] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no
>[    7.074200] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: yes
>[    7.074225] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: yes
>[    7.074251] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: no
>[    7.074277] [drm:intel_device_info_dump [i915]] i915 device info: unfenced_needs_alignment: no
>[    7.074305] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no
>[    7.074332] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no
>[    7.074357] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no
>[    7.074385] [drm:i915_driver_load [i915]] i915 device info: supports_tv: no
>[    7.075588] [drm] PipeC fused off
>[    7.075626] [drm:intel_device_info_runtime_init [i915]] slice mask: 0000
>[    7.075657] [drm:intel_device_info_runtime_init [i915]] slice total: 0
>[    7.075689] [drm:intel_device_info_runtime_init [i915]] subslice total: 0
>[    7.075721] [drm:intel_device_info_runtime_init [i915]] subslice mask 0000
>[    7.075751] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 0
>[    7.075783] [drm:intel_device_info_runtime_init [i915]] EU total: 0
>[    7.075814] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 0
>[    7.075846] [drm:intel_device_info_runtime_init [i915]] has slice power gating: n
>[    7.075877] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: n
>[    7.075906] [drm:i915_driver_load [i915]] has EU power gating: n
>[    7.075934] [drm:i915_driver_load [i915]] ppgtt mode: 1
>[    7.075963] [drm:i915_driver_load [i915]] use GPU semaphores? yes
>[    7.078267] [drm] Memory usable by graphics device = 2048M
>[    7.078312] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
>[    7.078344] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 64M
>[    7.078346] checking generic (e0000000 300000) vs hw (e0000000 10000000)
>[    7.078347] fb: switching to inteldrmfb from EFI VGA
>[    7.078379] Console: switching to colour dummy device 80x25
>[    7.078448] [drm] Replacing VGA console driver
>[    7.078624] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K
>[    7.078668] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x77b04018
>[    7.078723] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[    7.078760] [drm:intel_opregion_setup [i915]] SWSCI supported
>[    7.093164] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    7.093201] [drm:intel_opregion_setup [i915]] ASLE supported
>[    7.093234] [drm:intel_opregion_setup [i915]] ASLE extension supported
>[    7.093267] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    7.093319] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    7.093320] [drm] Driver supports precise vblank timestamp query.
>[    7.093356] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
>[    7.093390] [drm:intel_bios_init [i915]] VBT signature "$VBT HASWELL        ", BDB version 170
>[    7.093423] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    7.093456] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
>[    7.097529] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)
>[    7.097569] [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
>[    7.097607] [drm:intel_bios_init [i915]] DRRS supported mode is static
>[    7.097648] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
>[    7.097657] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    7.097695] [drm:intel_bios_init [i915]] VBT initial LVDS value 300
>[    7.097733] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0
>[    7.097772] [drm:intel_bios_init [i915]] Found SDVO panel mode in BIOS VBT tables:
>[    7.097779] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    7.097816] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT
>[    7.097854] [drm:intel_bios_init [i915]] DRRS State Enabled:1
>[    7.097893] [drm:intel_bios_init [i915]] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    7.097931] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 10
>[    7.098802] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
>[    7.098837] [drm:i915_driver_load [i915]] rawclk rate: 125000 kHz
>[    7.098873] [drm:intel_power_well_enable [i915]] enabling always-on
>[    7.098906] [drm:intel_power_well_enable [i915]] enabling display
>[    7.099152] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0
>[    7.099186] [drm:intel_print_wm_latency [i915]] Primary WM0 latency 20 (2.0 usec)
>[    7.099219] [drm:intel_print_wm_latency [i915]] Primary WM1 latency 4 (2.0 usec)
>[    7.099251] [drm:intel_print_wm_latency [i915]] Primary WM2 latency 36 (18.0 usec)
>[    7.099284] [drm:intel_print_wm_latency [i915]] Primary WM3 latency 90 (45.0 usec)
>[    7.099317] [drm:intel_print_wm_latency [i915]] Primary WM4 latency 160 (80.0 usec)
>[    7.099350] [drm:intel_print_wm_latency [i915]] Sprite WM0 latency 20 (2.0 usec)
>[    7.099383] [drm:intel_print_wm_latency [i915]] Sprite WM1 latency 4 (2.0 usec)
>[    7.099415] [drm:intel_print_wm_latency [i915]] Sprite WM2 latency 36 (18.0 usec)
>[    7.099448] [drm:intel_print_wm_latency [i915]] Sprite WM3 latency 90 (45.0 usec)
>[    7.099480] [drm:intel_print_wm_latency [i915]] Sprite WM4 latency 160 (80.0 usec)
>[    7.099511] [drm:intel_print_wm_latency [i915]] Cursor WM0 latency 20 (2.0 usec)
>[    7.099543] [drm:intel_print_wm_latency [i915]] Cursor WM1 latency 4 (2.0 usec)
>[    7.099575] [drm:intel_print_wm_latency [i915]] Cursor WM2 latency 36 (18.0 usec)
>[    7.099608] [drm:intel_print_wm_latency [i915]] Cursor WM3 latency 90 (45.0 usec)
>[    7.099640] [drm:intel_print_wm_latency [i915]] Cursor WM4 latency 160 (80.0 usec)
>[    7.099679] [drm:intel_modeset_init [i915]] 2 display pipes available.
>[    7.100733] [drm:intel_update_cdclk [i915]] Current CD clock rate: 540000 kHz, VCO: 0 kHz, ref: 0 kHz
>[    7.100787] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 540000 kHz
>[    7.100826] [drm:intel_modeset_init [i915]] Max dotclock rate: 540000 kHz
>[    7.100830] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    7.101177] [drm:intel_crt_reset [i915]] crt adpa set to 0x80f40000
>[    7.101217] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C
>[    7.101256] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT)
>[    7.101300] [drm:intel_modeset_init [i915]] VBT says port D is not DVI/HDMI/DP compatible, respect it
>[    7.101548] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1
>[    7.101582] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:32:pipe A] hw state readout: enabled
>[    7.101617] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
>[    7.101650] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe B] hw state readout: disabled
>[    7.101682] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[    7.101714] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[    7.101745] [drm:intel_modeset_setup_hw_state [i915]] SPLL hw state readout: crtc_mask 0x00000001, on 1
>[    7.101777] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1
>[    7.101808] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1
>[    7.101838] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1
>[    7.101886] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:41:CRT] hw state readout: enabled, pipe A
>[    7.101917] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:42:DDI C] hw state readout: disabled, pipe A
>[    7.101949] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:40:VGA-1] hw state readout: enabled
>[    7.101979] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:43:HDMI-A-1] hw state readout: disabled
>[    7.102019] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][setup_hw_state]
>[    7.102051] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[    7.102083] [drm:intel_dump_m_n_config.isra.53 [i915]] fdi: lanes: 1; gmch_m: 6058439, gmch_n: 8388608, link_m: 126217, link_n: 524288, tu: 64
>[    7.102114] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    7.102145] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    7.102153] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 60 65011 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    7.102190] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    7.102197] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 60 65011 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    7.102236] [drm:intel_dump_pipe_config [i915]] crtc timings: 65011 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa
>[    7.102275] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1024x768, pixel rate 65011
>[    7.102313] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x04000300, enabled
>[    7.102351] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    7.102401] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[    7.102440] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    7.102480] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] disabled, scaler_id = 0
>[    7.102520] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[    7.102559] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0
>[    7.102601] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe B][setup_hw_state]
>[    7.102640] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[    7.102680] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    7.102718] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    7.102725] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    7.102763] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    7.102773] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    7.102811] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    7.102849] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[    7.102888] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    7.102926] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    7.102963] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[    7.102997] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    7.103031] [drm:intel_dump_pipe_config [i915]] [PLANE:33:primary B] disabled, scaler_id = 0
>[    7.103065] [drm:intel_dump_pipe_config [i915]] [PLANE:35:sprite B] disabled, scaler_id = 0
>[    7.103102] [drm:intel_dump_pipe_config [i915]] [PLANE:37:cursor B] disabled, scaler_id = 0
>[    7.103141] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 enabled but not in use, disabling
>[    7.103177] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 enabled but not in use, disabling
>[    7.103211] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 enabled but not in use, disabling
>[    7.105604] [drm:ironlake_get_initial_plane_config [i915]] pipe A with fb: size=1024x768@32, offset=0, pitch 4096, size 0x300000
>[    7.105643] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=300000
>[    7.105689] [drm:intel_alloc_initial_plane_obj.isra.85 [i915]] initial plane fb obj ffff88006adf7980
>[    7.105735] [drm:intel_modeset_init [i915]] pipe A active planes 0x1
>[    7.105807] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [301000, 80000000]
>[    7.107956] [drm:i915_ppgtt_create [i915]] Allocated pde space (2M) at GTT entry: 7fe00
>[    7.108016] [drm:i915_ppgtt_create [i915]] Adding PPGTT at offset 7fe00000
>[    7.108052] [drm:i915_gem_context_init [i915]] logical context support initialized
>[    7.111505] [drm:intel_init_ring_buffer [i915]] rcs0 hws offset: 0x00301000
>[    7.111552] [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0x7fdee000
>[    7.113405] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    7.114247] [drm:intel_init_ring_buffer [i915]] bcs0 hws offset: 0x00322000
>[    7.114881] [drm:intel_init_ring_buffer [i915]] vcs0 hws offset: 0x00343000
>[    7.115867] [drm:intel_init_ring_buffer [i915]] vecs0 hws offset: 0x00364000
>[    7.115945] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 0
>[    7.116030] [drm:sandybridge_pcode_read [i915]] warning: pcode (read) mailbox access failed: -6
>[    7.116065] [drm:intel_init_gt_powersave [i915]] Overclocking supported, max: 1050MHz, overclock: 1050MHz
>[    7.116105] [drm:intel_fbdev_init [i915]] found possible fb from plane A
>[    7.116142] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
>[    7.116179] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb
>[    7.116217] [drm:intel_fbdev_init [i915]] pipe A area: 1024x768, bpp: 32, size: 3145728
>[    7.116254] [drm:intel_fbdev_init [i915]] fb big enough for plane A (3145728 >= 3145728)
>[    7.116291] [drm:intel_fbdev_init [i915]] pipe B not active, skipping
>[    7.116328] [drm:intel_fbdev_init [i915]] using BIOS fb for initial console
>[    7.116376] [drm:intel_crt_detect [i915]] [CONNECTOR:40:VGA-1] force=0
>[    7.116415] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40000
>[    7.118064] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
>[    7.118181] [drm:intel_opregion_register [i915]] 2 outputs detected
>[    7.118962] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    7.119272] [drm:asle_work [i915]] bclp = 0x80000002
>[    7.120176] acpi device:62: registered as cooling_device2
>[    7.120242] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
>[    7.126176] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1
>[    7.126215] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[    7.126223] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:40:VGA-1] status updated from unknown to connected
>[    7.126263] [drm:intel_hdmi_detect [i915]] [CONNECTOR:43:HDMI-A-1]
>[    7.128000] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    7.128038] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    7.130095] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    7.130107] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    7.132097] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    7.132135] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    7.134186] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    7.134193] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    7.134199] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1] status updated from unknown to disconnected
>[    7.134207] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    7.134212] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1]
>[    7.134252] [drm:asle_work [i915]] updating opregion backlight 2/255
>[    7.134288] [drm:asle_work [i915]] No request on ASLC interrupt 0x00000000
>[    7.134327] [drm:intel_crt_detect [i915]] [CONNECTOR:40:VGA-1] force=1
>[    7.134366] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1
>[    7.134404] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[    7.171990] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    7.172002] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1] probed modes :
>[    7.172009] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[    7.172015] [drm:drm_mode_debug_printmodeline [drm]] Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    7.172021] [drm:drm_mode_debug_printmodeline [drm]] Modeline 57:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    7.172026] [drm:drm_mode_debug_printmodeline [drm]] Modeline 58:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    7.172031] [drm:drm_mode_debug_printmodeline [drm]] Modeline 59:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    7.172036] [drm:drm_mode_debug_printmodeline [drm]] Modeline 60:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    7.172041] [drm:drm_mode_debug_printmodeline [drm]] Modeline 52:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    7.172046] [drm:drm_mode_debug_printmodeline [drm]] Modeline 53:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    7.172052] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    7.172057] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"720x400" 70 28320 720 738 846 900 400 413 415 449 0x40 0x6
>[    7.172062] [drm:drm_mode_debug_printmodeline [drm]] Modeline 55:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    7.172066] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1]
>[    7.172116] [drm:intel_hdmi_detect [i915]] [CONNECTOR:43:HDMI-A-1]
>[    7.174184] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    7.174222] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    7.176003] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    7.176018] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    7.178088] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    7.178126] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    7.180021] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    7.180029] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    7.180034] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1] disconnected
>[    7.180039] [drm:drm_setup_crtcs [drm_kms_helper]] connector 40 enabled? yes
>[    7.180042] [drm:drm_setup_crtcs [drm_kms_helper]] connector 43 enabled? no
>[    7.180078] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    7.180082] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 40
>[    7.180086] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 40 0
>[    7.180088] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1280x1024
>[    7.180091] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config
>[    7.180096] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1280x1024 set on crtc 32 (0,0)
>[    7.180134] [drm:intelfb_create [i915]] BIOS fb too small (1024x768), we require (1280x1024), releasing it
>[    7.180171] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
>[    7.180820] [drm:intelfb_create [i915]] allocated 1280x1024 fb: 0x00385000
>[    7.180968] fbcon: inteldrmfb (fb0) is primary device
>[    7.181074] [drm:intel_atomic_check [i915]] [CONNECTOR:40:VGA-1] checking for sink bpp constrains
>[    7.181113] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24
>[    7.181157] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 2
>[    7.181196] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[    7.181235] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset]
>[    7.181273] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[    7.181311] [drm:intel_dump_m_n_config.isra.53 [i915]] fdi: lanes: 2; gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
>[    7.181349] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    7.181387] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    7.181396] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[    7.181432] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    7.181439] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[    7.181479] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
>[    7.181517] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000
>[    7.181556] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    7.181594] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    7.181632] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[    7.181670] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    7.181709] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] FB:48, fb = 1024x768 format = XR24 little-endian (0x34325258)
>[    7.181747] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[    7.181785] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0
>[    7.181828] [drm:intel_find_shared_dpll [i915]] [CRTC:32:pipe A] allocated SPLL
>[    7.181865] [drm:intel_reference_shared_dpll [i915]] using SPLL for pipe A
>[    7.181922] [drm:intel_disable_pipe [i915]] disabling pipe A
>[    7.212027] [drm:intel_disable_shared_dpll [i915]] disable SPLL (active 1, on? 1) for crtc 32
>[    7.212065] [drm:intel_disable_shared_dpll [i915]] disabling SPLL
>[    7.212105] [drm:intel_atomic_commit_tail [i915]] [ENCODER:41:CRT]
>[    7.212138] [drm:intel_atomic_commit_tail [i915]] [ENCODER:42:DDI C]
>[    7.212173] [drm:verify_single_dpll_state.isra.79 [i915]] WRPLL 1
>[    7.212207] [drm:verify_single_dpll_state.isra.79 [i915]] WRPLL 2
>[    7.212245] [drm:verify_single_dpll_state.isra.79 [i915]] SPLL
>[    7.212284] [drm:verify_single_dpll_state.isra.79 [i915]] LCPLL 810
>[    7.212322] [drm:verify_single_dpll_state.isra.79 [i915]] LCPLL 1350
>[    7.212359] [drm:verify_single_dpll_state.isra.79 [i915]] LCPLL 2700
>[    7.212401] [drm:intel_enable_shared_dpll [i915]] enable SPLL (active 1, on? 0) for crtc 32
>[    7.212439] [drm:intel_enable_shared_dpll [i915]] enabling SPLL
>[    7.213360] [drm:hsw_fdi_link_train [i915]] FDI link training done on step 0
>[    7.213443] [drm:intel_enable_pipe [i915]] enabling pipe A
>[    7.213494] [drm:haswell_crtc_enable [i915]] iCLKIP clock: found settings for 108000KHz refresh rate: auxdiv=0, divsel=17, phasedir=0, phaseinc=0
>[    7.242875] ath: EEPROM regdomain: 0x809c
>[    7.242876] ath: EEPROM indicates we should expect a country code
>[    7.242877] ath: doing EEPROM country->regdmn map search
>[    7.242877] ath: country maps to regdmn code: 0x52
>[    7.242878] ath: Country alpha2 being used: CN
>[    7.242878] ath: Regpair used: 0x52
>[    7.256740] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[    7.257048] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000760000, irq=17
>[    7.263625] [drm:verify_connector_state.isra.78 [i915]] [CONNECTOR:40:VGA-1]
>[    7.263668] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A]
>[    7.263733] [drm:verify_single_dpll_state.isra.79 [i915]] SPLL
>[    7.263792] Console: switching to colour frame buffer device 160x64
>[    7.283371] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    7.487377] iTCO_vendor_support: vendor-support=0
>[    7.504281] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    7.504320] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
>[    7.504961] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    7.551752] [drm:asle_work [i915]] bclp = 0x80000033
>[    7.551770] [drm:asle_work [i915]] updating opregion backlight 51/255
>[    8.286040] random: crng init done
>[    8.287173] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[    8.832015] [drm:intel_enable_gt_powersave [i915]] Enabling RC6 states: RC6 on
>[    8.832036] [drm:sandybridge_pcode_read [i915]] warning: pcode (read) mailbox access failed: -6
>[    9.751029] [drm:drm_mode_addfb2 [drm]] [FB:47]
>[    9.956053] [drm:intel_engine_cmd_parser [i915]] CMD: Rejected register 0x00002360 in command: 0x11000001 (rcs0)
>[    9.961109] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1]
>[    9.961133] [drm:intel_crt_detect [i915]] [CONNECTOR:40:VGA-1] force=1
>[    9.961152] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40018, result 1
>[    9.961166] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[    9.999739] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[    9.999767] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1] probed modes :
>[    9.999785] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[    9.999799] [drm:drm_mode_debug_printmodeline [drm]] Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    9.999812] [drm:drm_mode_debug_printmodeline [drm]] Modeline 57:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    9.999825] [drm:drm_mode_debug_printmodeline [drm]] Modeline 58:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    9.999838] [drm:drm_mode_debug_printmodeline [drm]] Modeline 59:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    9.999850] [drm:drm_mode_debug_printmodeline [drm]] Modeline 60:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    9.999863] [drm:drm_mode_debug_printmodeline [drm]] Modeline 52:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    9.999876] [drm:drm_mode_debug_printmodeline [drm]] Modeline 53:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    9.999888] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    9.999901] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"720x400" 70 28320 720 738 846 900 400 413 415 449 0x40 0x6
>[    9.999913] [drm:drm_mode_debug_printmodeline [drm]] Modeline 55:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   10.000152] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1]
>[   10.000195] [drm:intel_hdmi_detect [i915]] [CONNECTOR:43:HDMI-A-1]
>[   10.002242] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   10.002261] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   10.004036] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   10.004047] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   10.006099] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   10.006118] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   10.007981] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   10.007991] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   10.007996] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1] disconnected
>[   10.008102] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1]
>[   10.008123] [drm:intel_crt_detect [i915]] [CONNECTOR:40:VGA-1] force=1
>[   10.008143] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40018, result 1
>[   10.008161] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[   10.046042] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[   10.046064] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1] probed modes :
>[   10.046077] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[   10.046087] [drm:drm_mode_debug_printmodeline [drm]] Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   10.046097] [drm:drm_mode_debug_printmodeline [drm]] Modeline 57:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   10.046106] [drm:drm_mode_debug_printmodeline [drm]] Modeline 58:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[   10.046116] [drm:drm_mode_debug_printmodeline [drm]] Modeline 59:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   10.046125] [drm:drm_mode_debug_printmodeline [drm]] Modeline 60:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   10.046135] [drm:drm_mode_debug_printmodeline [drm]] Modeline 52:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   10.046144] [drm:drm_mode_debug_printmodeline [drm]] Modeline 53:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   10.046153] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[   10.046163] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"720x400" 70 28320 720 738 846 900 400 413 415 449 0x40 0x6
>[   10.046172] [drm:drm_mode_debug_printmodeline [drm]] Modeline 55:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   10.046675] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1]
>[   10.046709] [drm:intel_hdmi_detect [i915]] [CONNECTOR:43:HDMI-A-1]
>[   10.048205] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   10.048234] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   10.050313] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   10.050327] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   10.052102] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   10.052129] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   10.054211] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   10.054219] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   10.054225] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1] disconnected
>[   10.255675] wlan0: authenticate with f8:d1:11:ce:7d:59
>[   10.268434] wlan0: send auth to f8:d1:11:ce:7d:59 (try 1/3)
>[   10.270122] wlan0: authenticated
>[   10.272004] wlan0: associate with f8:d1:11:ce:7d:59 (try 1/3)
>[   10.275725] wlan0: RX AssocResp from f8:d1:11:ce:7d:59 (capab=0x411 status=0 aid=2)
>[   10.275821] wlan0: associated
>[   10.275844] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[   10.462580] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   10.462603] [drm:drm_mode_setcrtc [drm]] [CRTC:32:pipe A]
>[   10.462625] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:40:VGA-1]
>[   10.495867] [drm:drm_mode_setcrtc [drm]] [CRTC:39:pipe B]
>[   10.933328] [drm:intel_engine_cmd_parser [i915]] CMD: Rejected register 0x00002360 in command: 0x11000001 (rcs0)
>[   13.004807] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   13.011772] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   13.028442] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   13.045149] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   13.061817] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   13.078488] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   13.095162] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   13.111820] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   13.128482] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   13.145104] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   13.161773] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   13.178467] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   13.507484] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   14.006940] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   14.507707] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   15.007252] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   15.506949] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   16.007463] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   16.507109] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   17.007724] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   17.266440] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   17.621936] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   17.982024] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   18.157961] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   18.230032] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   18.389945] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   18.573961] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   18.845958] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   18.950023] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   19.293994] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   19.397953] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   19.573994] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   19.968772] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   19.984427] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   20.000372] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   20.016483] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   20.032294] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   20.048754] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   20.065014] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   21.522189] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1]
>[   21.522221] [drm:intel_crt_detect [i915]] [CONNECTOR:40:VGA-1] force=1
>[   21.522241] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40018, result 1
>[   21.522255] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[   21.559985] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[   21.560000] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1] probed modes :
>[   21.560007] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[   21.560012] [drm:drm_mode_debug_printmodeline [drm]] Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   21.560018] [drm:drm_mode_debug_printmodeline [drm]] Modeline 57:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   21.560023] [drm:drm_mode_debug_printmodeline [drm]] Modeline 58:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[   21.560028] [drm:drm_mode_debug_printmodeline [drm]] Modeline 59:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   21.560034] [drm:drm_mode_debug_printmodeline [drm]] Modeline 60:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   21.560039] [drm:drm_mode_debug_printmodeline [drm]] Modeline 52:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   21.560044] [drm:drm_mode_debug_printmodeline [drm]] Modeline 53:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   21.560049] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[   21.560054] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"720x400" 70 28320 720 738 846 900 400 413 415 449 0x40 0x6
>[   21.560059] [drm:drm_mode_debug_printmodeline [drm]] Modeline 55:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   21.560233] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1]
>[   21.560256] [drm:intel_hdmi_detect [i915]] [CONNECTOR:43:HDMI-A-1]
>[   21.562188] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   21.562203] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   21.564084] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   21.564092] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   21.566150] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   21.566167] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   21.568148] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   21.568155] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   21.568159] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1] disconnected
>[   21.568356] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1]
>[   21.568375] [drm:intel_crt_detect [i915]] [CONNECTOR:40:VGA-1] force=1
>[   21.568393] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40018, result 1
>[   21.568407] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[   21.606005] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[   21.606020] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1] probed modes :
>[   21.606028] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[   21.606034] [drm:drm_mode_debug_printmodeline [drm]] Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   21.606040] [drm:drm_mode_debug_printmodeline [drm]] Modeline 57:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   21.606045] [drm:drm_mode_debug_printmodeline [drm]] Modeline 58:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[   21.606050] [drm:drm_mode_debug_printmodeline [drm]] Modeline 59:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   21.606056] [drm:drm_mode_debug_printmodeline [drm]] Modeline 60:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   21.606061] [drm:drm_mode_debug_printmodeline [drm]] Modeline 52:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   21.606067] [drm:drm_mode_debug_printmodeline [drm]] Modeline 53:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   21.606072] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[   21.606077] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"720x400" 70 28320 720 738 846 900 400 413 415 449 0x40 0x6
>[   21.606082] [drm:drm_mode_debug_printmodeline [drm]] Modeline 55:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   21.606257] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1]
>[   21.606283] [drm:intel_hdmi_detect [i915]] [CONNECTOR:43:HDMI-A-1]
>[   21.609027] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   21.609043] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   21.611077] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   21.611088] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   21.613128] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   21.613143] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   21.615174] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   21.615181] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   21.615185] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1] disconnected
>[   22.026706] fuse init (API version 7.26)
>[   52.875314] PM: Hibernation mode set to 'platform'
>[   52.878372] PM: Syncing filesystems ... 
>[   52.898711] [drm:intel_atomic_check [i915]] [CONNECTOR:40:VGA-1] checking for sink bpp constrains
>[   52.898745] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24
>[   52.898779] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 2
>[   52.898809] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[   52.898843] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset]
>[   52.898874] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[   52.898906] [drm:intel_dump_m_n_config.isra.53 [i915]] fdi: lanes: 2; gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
>[   52.898936] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   52.898969] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   52.898987] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[   52.899018] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   52.899032] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[   52.899064] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
>[   52.899094] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000
>[   52.899124] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   52.899153] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   52.899183] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[   52.899211] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   52.899243] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] FB:63, fb = 1280x1024 format = XR24 little-endian (0x34325258)
>[   52.899272] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[   52.899301] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0
>[   52.899342] [drm:intel_find_shared_dpll [i915]] [CRTC:32:pipe A] allocated SPLL
>[   52.899373] [drm:intel_reference_shared_dpll [i915]] using SPLL for pipe A
>[   52.899430] [drm:intel_disable_pipe [i915]] disabling pipe A
>[   52.933553] [drm:intel_disable_shared_dpll [i915]] disable SPLL (active 1, on? 1) for crtc 32
>[   52.933607] [drm:intel_disable_shared_dpll [i915]] disabling SPLL
>[   52.933666] [drm:intel_atomic_commit_tail [i915]] [ENCODER:41:CRT]
>[   52.933716] [drm:intel_atomic_commit_tail [i915]] [ENCODER:42:DDI C]
>[   52.933769] [drm:verify_single_dpll_state.isra.79 [i915]] WRPLL 1
>[   52.933819] [drm:verify_single_dpll_state.isra.79 [i915]] WRPLL 2
>[   52.933868] [drm:verify_single_dpll_state.isra.79 [i915]] SPLL
>[   52.933918] [drm:verify_single_dpll_state.isra.79 [i915]] LCPLL 810
>[   52.933966] [drm:verify_single_dpll_state.isra.79 [i915]] LCPLL 1350
>[   52.934013] [drm:verify_single_dpll_state.isra.79 [i915]] LCPLL 2700
>[   52.934063] [drm:intel_power_well_disable [i915]] disabling display
>[   52.934103] [drm:intel_display_power_put [i915]] Requesting to disable the power well
>[   52.934154] [drm:verify_connector_state.isra.78 [i915]] [CONNECTOR:40:VGA-1]
>[   52.934207] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A]
>[   52.934258] [drm:verify_single_dpll_state.isra.79 [i915]] SPLL
>[   52.934300] [drm:intel_power_well_disable [i915]] disabling always-on
>[   52.986966] PM: done.
>[   52.986970] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[   52.988604] OOM killer disabled.
>[   52.988695] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[   52.988697] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
>[   52.988699] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
>[   52.988706] PM: Marking nosave pages: [mem 0x602fe000-0x60304fff]
>[   52.988708] PM: Marking nosave pages: [mem 0x60750000-0x60b67fff]
>[   52.988755] PM: Marking nosave pages: [mem 0x776b2000-0x78ffefff]
>[   52.989068] PM: Marking nosave pages: [mem 0x79000000-0xffffffff]
>[   52.995164] PM: Basic memory bitmaps created
>[   52.995325] PM: Preallocating image memory... done (allocated 150771 pages)
>[   53.052111] PM: Allocated 603084 kbytes in 0.05 seconds (12061.68 MB/s)
>[   53.052112] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[   53.053202] Suspending console(s) (use no_console_suspend to debug)
>[   53.053239] wlan0: deauthenticating from f8:d1:11:ce:7d:59 by local choice (Reason: 3=DEAUTH_LEAVING)
>[   53.054172] [drm:intel_power_well_enable [i915]] enabling always-on
>[   53.054184] [drm:intel_power_well_enable [i915]] enabling display
>[   53.054197] [drm:hsw_set_power_well.constprop.14 [i915]] Enabling power well
>[   53.069253] [drm:intel_atomic_commit_tail [i915]] [ENCODER:41:CRT]
>[   53.069279] [drm:intel_atomic_commit_tail [i915]] [ENCODER:42:DDI C]
>[   53.069304] [drm:verify_connector_state.isra.78 [i915]] [CONNECTOR:40:VGA-1]
>[   53.069328] [drm:verify_single_dpll_state.isra.79 [i915]] WRPLL 1
>[   53.069352] [drm:verify_single_dpll_state.isra.79 [i915]] WRPLL 2
>[   53.069375] [drm:verify_single_dpll_state.isra.79 [i915]] SPLL
>[   53.069398] [drm:verify_single_dpll_state.isra.79 [i915]] LCPLL 810
>[   53.069420] [drm:verify_single_dpll_state.isra.79 [i915]] LCPLL 1350
>[   53.069441] [drm:verify_single_dpll_state.isra.79 [i915]] LCPLL 2700
>[   53.069467] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A]
>[   53.272096] PM: freeze of devices complete after 218.849 msecs
>[   53.272330] [drm:intel_power_well_disable [i915]] disabling display
>[   53.272348] [drm:intel_display_power_put [i915]] Requesting to disable the power well
>[   53.272363] [drm:intel_power_well_disable [i915]] disabling always-on
>[   53.272386] [drm:hsw_enable_pc8 [i915]] Enabling package C8+
>[   53.272465] [drm:sandybridge_pcode_write [i915]] warning: pcode (write) mailbox access failed: -6
>[   53.272486] [drm:hsw_write_dcomp [i915]] Failed to write to D_COMP
>[   53.289204] PM: late freeze of devices complete after 17.099 msecs
>[   53.289915] PM: noirq freeze of devices complete after 0.695 msecs
>[   53.290219] ACPI: Preparing to enter system sleep state S4
>[   53.291130] PM: Saving platform NVS memory
>[   53.295778] Disabling non-boot CPUs ...
>[   53.309412] IRQ 9: no longer affine to CPU1
>[   53.309418] IRQ 17: no longer affine to CPU1
>[   53.309437] IRQ 28: no longer affine to CPU1
>[   53.309440] IRQ 31: no longer affine to CPU1
>[   53.310464] smpboot: CPU 1 is now offline
>[   53.310781] PM: Creating hibernation image:
>[   53.371075] PM: Need to copy 150474 pages
>[   53.371077] PM: Normal pages needed: 150474 + 1024, available pages: 341024
>[   53.312043] PM: Restoring platform NVS memory
>[   53.314063] Suspended for 535.000 seconds
>[   53.314164] Enabling non-boot CPUs ...
>[   53.314272] x86: Booting SMP configuration:
>[   53.314275] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[   53.315283]  cache: parent cpu1 should not be sleeping
>[   53.315648] CPU1 is up
>[   53.320700] ACPI: Waking up from system sleep state S4
>[   53.340507] PM: noirq restore of devices complete after 18.565 msecs
>[   53.340597] [drm:hsw_disable_pc8 [i915]] Disabling package C8+
>[   53.340827] [drm:intel_power_well_enable [i915]] enabling always-on
>[   53.340849] [drm:intel_power_well_enable [i915]] enabling display
>[   53.342687] PM: early restore of devices complete after 2.160 msecs
>[   53.367762] usb usb1: root hub lost power or was reset
>[   53.367764] usb usb2: root hub lost power or was reset
>[   53.368815] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x77b04018
>[   53.368855] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[   53.368871] [drm:intel_opregion_setup [i915]] SWSCI supported
>[   53.368910] usb usb3: root hub lost power or was reset
>[   53.369193] usb usb4: root hub lost power or was reset
>[   53.372786] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[   53.373090] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[   53.379751] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[   53.379769] [drm:intel_opregion_setup [i915]] ASLE supported
>[   53.379786] [drm:intel_opregion_setup [i915]] ASLE extension supported
>[   53.379804] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[   53.380045] [drm:intel_crt_reset [i915]] crt adpa set to 0x80f40000
>[   53.380088] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 0
>[   53.380143] [drm:intel_update_cdclk [i915]] Current CD clock rate: 540000 kHz, VCO: 0 kHz, ref: 0 kHz
>[   53.380184] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1
>[   53.380199] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:32:pipe A] hw state readout: enabled
>[   53.380215] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
>[   53.380229] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe B] hw state readout: disabled
>[   53.380244] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[   53.380259] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[   53.380273] [drm:intel_modeset_setup_hw_state [i915]] SPLL hw state readout: crtc_mask 0x00000001, on 1
>[   53.380287] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1
>[   53.380301] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1
>[   53.380315] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1
>[   53.380397] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:41:CRT] hw state readout: enabled, pipe A
>[   53.380414] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:42:DDI C] hw state readout: disabled, pipe A
>[   53.380429] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:40:VGA-1] hw state readout: enabled
>[   53.380444] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:43:HDMI-A-1] hw state readout: disabled
>[   53.380480] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][setup_hw_state]
>[   53.380495] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[   53.380510] [drm:intel_dump_m_n_config.isra.53 [i915]] fdi: lanes: 1; gmch_m: 6058439, gmch_n: 8388608, link_m: 126217, link_n: 524288, tu: 64
>[   53.380524] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   53.380539] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   53.380548] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 60 65011 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   53.380563] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   53.380569] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 60 65011 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   53.380585] [drm:intel_dump_pipe_config [i915]] crtc timings: 65011 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa
>[   53.380599] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1024x768, pixel rate 65011
>[   53.380613] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x04000300, enabled
>[   53.380627] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   53.380642] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[   53.380655] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   53.380669] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] disabled, scaler_id = 0
>[   53.380683] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[   53.380697] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0
>[   53.380712] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe B][setup_hw_state]
>[   53.380725] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[   53.380739] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   53.380753] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   53.380759] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   53.380774] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   53.380780] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   53.380795] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   53.380809] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[   53.380823] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   53.380836] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   53.380850] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[   53.380863] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   53.380877] [drm:intel_dump_pipe_config [i915]] [PLANE:33:primary B] disabled, scaler_id = 0
>[   53.380891] [drm:intel_dump_pipe_config [i915]] [PLANE:35:sprite B] disabled, scaler_id = 0
>[   53.380905] [drm:intel_dump_pipe_config [i915]] [PLANE:37:cursor B] disabled, scaler_id = 0
>[   53.380921] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 enabled but not in use, disabling
>[   53.380936] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 enabled but not in use, disabling
>[   53.380950] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 enabled but not in use, disabling
>[   53.380976] [drm:intel_atomic_check [i915]] [CONNECTOR:40:VGA-1] checking for sink bpp constrains
>[   53.380990] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24
>[   53.381006] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 2
>[   53.381020] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[   53.381035] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset]
>[   53.381050] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[   53.381064] [drm:intel_dump_m_n_config.isra.53 [i915]] fdi: lanes: 2; gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
>[   53.381078] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   53.381092] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   53.381099] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[   53.381114] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   53.381120] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[   53.381135] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x0 flags: 0x5
>[   53.381150] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000
>[   53.381164] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   53.381177] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   53.381191] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[   53.381205] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   53.381219] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] disabled, scaler_id = 0
>[   53.381233] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[   53.381247] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0
>[   53.381267] [drm:intel_find_shared_dpll [i915]] [CRTC:32:pipe A] allocated SPLL
>[   53.381281] [drm:intel_reference_shared_dpll [i915]] using SPLL for pipe A
>[   53.381434] [drm:intel_disable_pipe [i915]] disabling pipe A
>[   53.401719] [drm:intel_disable_shared_dpll [i915]] disable SPLL (active 1, on? 1) for crtc 32
>[   53.401735] [drm:intel_disable_shared_dpll [i915]] disabling SPLL
>[   53.401754] [drm:intel_atomic_commit_tail [i915]] [ENCODER:41:CRT]
>[   53.401768] [drm:intel_atomic_commit_tail [i915]] [ENCODER:42:DDI C]
>[   53.401784] [drm:verify_connector_state.isra.78 [i915]] [CONNECTOR:43:HDMI-A-1]
>[   53.401799] [drm:verify_single_dpll_state.isra.79 [i915]] WRPLL 1
>[   53.401814] [drm:verify_single_dpll_state.isra.79 [i915]] WRPLL 2
>[   53.401829] [drm:verify_single_dpll_state.isra.79 [i915]] SPLL
>[   53.401843] [drm:verify_single_dpll_state.isra.79 [i915]] LCPLL 810
>[   53.401857] [drm:verify_single_dpll_state.isra.79 [i915]] LCPLL 1350
>[   53.401871] [drm:verify_single_dpll_state.isra.79 [i915]] LCPLL 2700
>[   53.401885] [drm:intel_power_well_disable [i915]] disabling display
>[   53.401897] [drm:intel_display_power_put [i915]] Requesting to disable the power well
>[   53.401911] [drm:verify_connector_state.isra.78 [i915]] [CONNECTOR:40:VGA-1]
>[   53.401928] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A]
>[   53.401943] [drm:verify_single_dpll_state.isra.79 [i915]] SPLL
>[   53.401958] [drm:intel_atomic_commit_tail [i915]] [CRTC:39:pipe B]
>[   53.401971] [drm:intel_power_well_disable [i915]] disabling always-on
>[   53.401996] [drm:intel_opregion_register [i915]] 2 outputs detected
>[   53.402024] [drm:intel_crt_detect [i915]] [CONNECTOR:40:VGA-1] force=0
>[   53.402036] [drm:intel_power_well_enable [i915]] enabling always-on
>[   53.402047] [drm:intel_power_well_enable [i915]] enabling display
>[   53.402059] [drm:hsw_set_power_well.constprop.14 [i915]] Enabling power well
>[   53.402076] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x3f40000
>[   53.412116] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1
>[   53.412131] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[   53.412143] [drm:intel_power_well_disable [i915]] disabling display
>[   53.412155] [drm:intel_display_power_put [i915]] Requesting to disable the power well
>[   53.412166] [drm:intel_power_well_disable [i915]] disabling always-on
>[   53.412170] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:40:VGA-1] status updated from connected to connected
>[   53.412186] [drm:intel_hdmi_detect [i915]] [CONNECTOR:43:HDMI-A-1]
>[   53.412197] [drm:intel_power_well_enable [i915]] enabling always-on
>[   53.414246] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   53.414261] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   53.416307] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   53.416315] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   53.418364] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   53.418381] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   53.420430] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   53.420435] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   53.420448] [drm:intel_power_well_disable [i915]] disabling always-on
>[   53.420452] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1] status updated from disconnected to disconnected
>[   53.600570] usb 2-2: Disable of device-initiated U1 failed.
>[   53.600592] usb 2-2: Disable of device-initiated U2 failed.
>[   53.708595] usb 4-1: reset high-speed USB device number 2 using ehci-pci
>[   53.708609] usb 3-1: reset high-speed USB device number 2 using ehci-pci
>[   53.864622] usb 1-10: reset low-speed USB device number 2 using xhci_hcd
>[   54.272998] usb 2-2: reset SuperSpeed USB device number 2 using xhci_hcd
>[   54.299768] PM: restore of devices complete after 931.950 msecs
>[   54.300200] PM: Image restored successfully.
>[   54.300222] PM: Basic memory bitmaps freed
>[   54.300228] OOM killer enabled.
>[   54.300229] Restarting tasks ... 
>[   54.309267] [drm:intel_atomic_check [i915]] [CONNECTOR:40:VGA-1] checking for sink bpp constrains
>[   54.309287] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24
>[   54.309306] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 2
>[   54.309322] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[   54.309340] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset]
>[   54.309356] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[   54.309372] [drm:intel_dump_m_n_config.isra.53 [i915]] fdi: lanes: 2; gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
>[   54.309386] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   54.309401] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   54.309410] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[   54.309425] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   54.309433] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[   54.309449] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x0 flags: 0x5
>[   54.309463] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000
>[   54.309478] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   54.309492] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   54.309507] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[   54.309521] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   54.309538] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] FB:63, fb = 1280x1024 format = XR24 little-endian (0x34325258)
>[   54.309553] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[   54.309568] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0
>[   54.309595] [drm:intel_find_shared_dpll [i915]] [CRTC:32:pipe A] allocated SPLL
>[   54.309609] [drm:intel_reference_shared_dpll [i915]] using SPLL for pipe A
>[   54.309623] [drm:ilk_validate_wm_level.part.20 [i915]] Sprite WM0 too large 56 (max 0)
>[   54.309634] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
>[   54.309649] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible
>[   54.309692] [drm:intel_atomic_check [i915]] [CONNECTOR:40:VGA-1] checking for sink bpp constrains
>[   54.309706] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24
>[   54.309721] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 2
>[   54.309736] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[   54.309751] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset]
>[   54.309766] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[   54.309781] [drm:intel_dump_m_n_config.isra.53 [i915]] fdi: lanes: 2; gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
>[   54.309795] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   54.309809] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   54.309816] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[   54.309831] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   54.309837] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[   54.309852] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x0 flags: 0x5
>[   54.309867] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000
>[   54.309881] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   54.309894] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   54.309909] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[   54.309922] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   54.309937] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] FB:63, fb = 1280x1024 format = XR24 little-endian (0x34325258)
>[   54.309951] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[   54.309965] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0
>[   54.309982] [drm:intel_find_shared_dpll [i915]] [CRTC:32:pipe A] allocated SPLL
>[   54.309997] [drm:intel_reference_shared_dpll [i915]] using SPLL for pipe A
>[   54.310009] [drm:ilk_validate_wm_level.part.20 [i915]] Sprite WM0 too large 56 (max 0)
>[   54.310019] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
>[   54.310034] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible
>[   54.311973] done.
>[   54.312030] video LNXVIDEO:00: Restoring backlight state
>[   54.312666] [drm:intel_enable_gt_powersave [i915]] Enabling RC6 states: RC6 on
>[   54.312684] [drm:sandybridge_pcode_read [i915]] warning: pcode (read) mailbox access failed: -6
>[   55.249525] wlan0: authenticate with f8:d1:11:ce:7d:59
>[   55.269072] wlan0: send auth to f8:d1:11:ce:7d:59 (try 1/3)
>[   55.270765] wlan0: authenticated
>[   55.272866] wlan0: associate with f8:d1:11:ce:7d:59 (try 1/3)
>[   55.276128] wlan0: RX AssocResp from f8:d1:11:ce:7d:59 (capab=0x411 status=0 aid=2)
>[   55.276224] wlan0: associated
>[   65.155184] [drm:ilk_validate_wm_level.part.20 [i915]] Sprite WM0 too large 56 (max 0)
>[   65.155199] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
>[   65.155215] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible
>[   65.155236] [drm:ilk_validate_wm_level.part.20 [i915]] Sprite WM0 too large 56 (max 0)
>[   65.155247] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
>[   65.155262] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible
>[  395.686800] [drm:intel_atomic_check [i915]] [CONNECTOR:40:VGA-1] checking for sink bpp constrains
>[  395.686854] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24
>[  395.686906] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 2
>[  395.686956] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[  395.687010] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset]
>[  395.687060] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[  395.687143] [drm:intel_dump_m_n_config.isra.53 [i915]] fdi: lanes: 2; gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
>[  395.687201] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  395.687251] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  395.687283] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  395.687338] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  395.687365] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  395.687417] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x0 flags: 0x5
>[  395.687471] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000
>[  395.687523] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  395.687571] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  395.687620] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[  395.687667] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  395.687718] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] FB:63, fb = 1280x1024 format = XR24 little-endian (0x34325258)
>[  395.687766] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[  395.687812] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0
>[  395.687877] [drm:intel_find_shared_dpll [i915]] [CRTC:32:pipe A] allocated SPLL
>[  395.687927] [drm:intel_reference_shared_dpll [i915]] using SPLL for pipe A
>[  395.687970] [drm:ilk_validate_wm_level.part.20 [i915]] Sprite WM0 too large 56 (max 0)
>[  395.688006] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
>[  395.688056] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible
>[  395.688113] [drm:ilk_validate_wm_level.part.20 [i915]] Sprite WM0 too large 56 (max 0)
>[  395.688148] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
>[  395.688199] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible
>[  395.688278] [drm:ilk_validate_wm_level.part.20 [i915]] Sprite WM0 too large 56 (max 0)
>[  395.688313] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
>[  395.688362] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible
>[  431.099854] PM: Hibernation mode set to 'platform'
>[  431.101434] PM: Syncing filesystems ... 
>[  431.182557] PM: done.
>[  431.182560] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[  431.184094] OOM killer disabled.
>[  431.184159] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[  431.184161] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
>[  431.184162] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
>[  431.184166] PM: Marking nosave pages: [mem 0x602fe000-0x60304fff]
>[  431.184168] PM: Marking nosave pages: [mem 0x60750000-0x60b67fff]
>[  431.184199] PM: Marking nosave pages: [mem 0x776b2000-0x78ffefff]
>[  431.184383] PM: Marking nosave pages: [mem 0x79000000-0xffffffff]
>[  431.188627] PM: Basic memory bitmaps created
>[  431.189026] PM: Preallocating image memory... done (allocated 151075 pages)
>[  431.276922] PM: Allocated 604300 kbytes in 0.08 seconds (7553.75 MB/s)
>[  431.276923] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[  431.278192] Suspending console(s) (use no_console_suspend to debug)
>[  431.278234] wlan0: deauthenticating from f8:d1:11:ce:7d:59 by local choice (Reason: 3=DEAUTH_LEAVING)
>[  431.279178] [drm:intel_power_well_enable [i915]] enabling always-on
>[  431.279191] [drm:intel_power_well_enable [i915]] enabling display
>[  431.279204] [drm:hsw_set_power_well.constprop.14 [i915]] Enabling power well
>[  431.294734] [drm:ilk_validate_wm_level.part.20 [i915]] Sprite WM0 too large 56 (max 0)
>[  431.294744] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
>[  431.294761] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible
>[  431.294780] [drm:intel_display_suspend [i915]] *ERROR* Suspending crtc's failed with -22
>[  431.493754] PM: freeze of devices complete after 215.502 msecs
>[  431.493978] [drm:intel_power_well_disable [i915]] disabling display
>[  431.493997] [drm:intel_display_power_put [i915]] Requesting to disable the power well
>[  431.494013] [drm:intel_power_well_disable [i915]] disabling always-on
>[  431.494036] [drm:hsw_enable_pc8 [i915]] Enabling package C8+
>[  431.494117] [drm:sandybridge_pcode_write [i915]] warning: pcode (write) mailbox access failed: -6
>[  431.494140] [drm:hsw_write_dcomp [i915]] Failed to write to D_COMP
>[  431.514702] PM: late freeze of devices complete after 20.938 msecs
>[  431.515399] PM: noirq freeze of devices complete after 0.692 msecs
>[  431.515703] ACPI: Preparing to enter system sleep state S4
>[  431.516580] PM: Saving platform NVS memory
>[  431.521706] Disabling non-boot CPUs ...
>[  431.535048] IRQ 9: no longer affine to CPU1
>[  431.535056] IRQ 17: no longer affine to CPU1
>[  431.535063] IRQ 28: no longer affine to CPU1
>[  431.535066] IRQ 31: no longer affine to CPU1
>[  431.536097] smpboot: CPU 1 is now offline
>[  431.536525] PM: Creating hibernation image:
>[  431.623214] PM: Need to copy 150866 pages
>[  431.623216] PM: Normal pages needed: 150866 + 1024, available pages: 340632
>[  431.537785] PM: Restoring platform NVS memory
>[  431.539799] Suspended for 75.461 seconds
>[  431.539874] Enabling non-boot CPUs ...
>[  431.539971] x86: Booting SMP configuration:
>[  431.539973] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[  431.540889]  cache: parent cpu1 should not be sleeping
>[  431.541236] CPU1 is up
>[  431.545940] ACPI: Waking up from system sleep state S4
>[  431.566078] PM: noirq restore of devices complete after 18.864 msecs
>[  431.566223] [drm:hsw_disable_pc8 [i915]] Disabling package C8+
>[  431.566501] [drm:intel_power_well_enable [i915]] enabling always-on
>[  431.566538] [drm:intel_power_well_enable [i915]] enabling display
>[  431.566744] PM: early restore of devices complete after 0.636 msecs
>[  431.594055] usb usb4: root hub lost power or was reset
>[  431.597951] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[  431.598860] usb usb3: root hub lost power or was reset
>[  431.602743] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[  431.602769] usb usb1: root hub lost power or was reset
>[  431.602771] usb usb2: root hub lost power or was reset
>[  431.603166] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x77b04018
>[  431.603198] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[  431.603212] [drm:intel_opregion_setup [i915]] SWSCI supported
>[  431.615650] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[  431.615665] [drm:intel_opregion_setup [i915]] ASLE supported
>[  431.615679] [drm:intel_opregion_setup [i915]] ASLE extension supported
>[  431.615694] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[  431.616193] [drm:intel_crt_reset [i915]] crt adpa set to 0x80f40000
>[  431.616236] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 0
>[  431.616290] [drm:intel_update_cdclk [i915]] Current CD clock rate: 540000 kHz, VCO: 0 kHz, ref: 0 kHz
>[  431.616333] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1
>[  431.616348] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:32:pipe A] hw state readout: enabled
>[  431.616364] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
>[  431.616378] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe B] hw state readout: disabled
>[  431.616393] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[  431.616408] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[  431.616422] [drm:intel_modeset_setup_hw_state [i915]] SPLL hw state readout: crtc_mask 0x00000001, on 1
>[  431.616436] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1
>[  431.616450] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1
>[  431.616464] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1
>[  431.616497] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:41:CRT] hw state readout: enabled, pipe A
>[  431.616512] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:42:DDI C] hw state readout: disabled, pipe A
>[  431.616526] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:40:VGA-1] hw state readout: enabled
>[  431.616541] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:43:HDMI-A-1] hw state readout: disabled
>[  431.616564] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][setup_hw_state]
>[  431.616579] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[  431.616594] [drm:intel_dump_m_n_config.isra.53 [i915]] fdi: lanes: 1; gmch_m: 6058439, gmch_n: 8388608, link_m: 126217, link_n: 524288, tu: 64
>[  431.616609] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  431.616623] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  431.616633] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 60 65011 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  431.616647] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  431.616654] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 60 65011 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  431.616669] [drm:intel_dump_pipe_config [i915]] crtc timings: 65011 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa
>[  431.616684] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1024x768, pixel rate 65011
>[  431.616698] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x04000300, enabled
>[  431.616713] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  431.616727] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[  431.616741] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  431.616756] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] FB:63, fb = 1280x1024 format = XR24 little-endian (0x34325258)
>[  431.616771] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[  431.616785] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0
>[  431.616799] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe B][setup_hw_state]
>[  431.616813] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[  431.616827] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  431.616840] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  431.616847] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  431.616862] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  431.616868] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  431.616883] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  431.616897] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[  431.616911] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  431.616925] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  431.616939] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[  431.616953] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  431.616967] [drm:intel_dump_pipe_config [i915]] [PLANE:33:primary B] disabled, scaler_id = 0
>[  431.616981] [drm:intel_dump_pipe_config [i915]] [PLANE:35:sprite B] disabled, scaler_id = 0
>[  431.616995] [drm:intel_dump_pipe_config [i915]] [PLANE:37:cursor B] disabled, scaler_id = 0
>[  431.617011] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 enabled but not in use, disabling
>[  431.617026] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 enabled but not in use, disabling
>[  431.617040] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 enabled but not in use, disabling
>[  431.617067] [drm:intel_opregion_register [i915]] 2 outputs detected
>[  431.617087] [drm:intel_crt_detect [i915]] [CONNECTOR:40:VGA-1] force=0
>[  431.617103] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40000
>[  431.627185] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1
>[  431.627200] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[  431.627205] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:40:VGA-1] status updated from connected to connected
>[  431.627221] [drm:intel_hdmi_detect [i915]] [CONNECTOR:43:HDMI-A-1]
>[  431.629283] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[  431.629298] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[  431.631364] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[  431.631373] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[  431.633440] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[  431.633458] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[  431.635524] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[  431.635530] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[  431.635534] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1] status updated from disconnected to disconnected
>[  431.830232] usb 2-2: Disable of device-initiated U1 failed.
>[  431.830246] usb 2-2: Disable of device-initiated U2 failed.
>[  431.938161] usb 3-1: reset high-speed USB device number 2 using ehci-pci
>[  431.938177] usb 4-1: reset high-speed USB device number 2 using ehci-pci
>[  431.950465] usb 2-2: reset SuperSpeed USB device number 2 using xhci_hcd
>[  432.238286] usb 1-10: reset low-speed USB device number 2 using xhci_hcd
>[  432.534174] PM: restore of devices complete after 940.025 msecs
>[  432.534627] PM: Image restored successfully.
>[  432.534649] PM: Basic memory bitmaps freed
>[  432.534655] OOM killer enabled.
>[  432.534657] Restarting tasks ... 
>[  432.542043] [drm:ilk_validate_wm_level.part.20 [i915]] Sprite WM0 too large 56 (max 0)
>[  432.542070] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
>[  432.542107] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible
>[  432.542167] [drm:ilk_validate_wm_level.part.20 [i915]] Sprite WM0 too large 56 (max 0)
>[  432.542191] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
>[  432.542226] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible
>[  432.543364] done.
>[  432.543494] video LNXVIDEO:00: Restoring backlight state
>[  432.545487] [drm:intel_enable_gt_powersave [i915]] Enabling RC6 states: RC6 on
>[  432.545523] [drm:sandybridge_pcode_read [i915]] warning: pcode (read) mailbox access failed: -6
>[  433.483877] wlan0: authenticate with f8:d1:11:ce:7d:59
>[  433.504510] wlan0: send auth to f8:d1:11:ce:7d:59 (try 1/3)
>[  433.506511] wlan0: authenticated
>[  433.510537] wlan0: associate with f8:d1:11:ce:7d:59 (try 1/3)
>[  433.513800] wlan0: RX AssocResp from f8:d1:11:ce:7d:59 (capab=0x411 status=0 aid=2)
>[  433.513895] wlan0: associated
>[  496.942710] [drm:intel_atomic_check [i915]] [CONNECTOR:40:VGA-1] checking for sink bpp constrains
>[  496.942761] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24
>[  496.942814] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 2
>[  496.942863] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[  496.942917] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset]
>[  496.942967] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[  496.943018] [drm:intel_dump_m_n_config.isra.53 [i915]] fdi: lanes: 2; gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
>[  496.943066] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  496.943114] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  496.943140] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[  496.943189] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  496.943211] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[  496.943263] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
>[  496.943312] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000
>[  496.943360] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  496.943408] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  496.943456] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[  496.943502] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  496.943553] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] FB:63, fb = 1280x1024 format = XR24 little-endian (0x34325258)
>[  496.943600] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[  496.943647] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0
>[  496.943709] [drm:intel_find_shared_dpll [i915]] [CRTC:32:pipe A] allocated SPLL
>[  496.943760] [drm:intel_reference_shared_dpll [i915]] using SPLL for pipe A
>[  496.943802] [drm:ilk_validate_wm_level.part.20 [i915]] Sprite WM0 too large 56 (max 0)
>[  496.943837] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
>[  496.943887] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible

Actions: View

Attachments on bug 101865: 132825 | 133602 | 133626 | 133627 | 133644 | 135095 | 135136

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.