Attachment 133644 Details for Bug 101865 – dmesg output

dmesg output

resume_fails_xrandr.txt (text/plain), 116.77 KB, created by nutrinfnon on 2017-08-21 10:56:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: nutrinfnon

Created: 2017-08-21 10:56:52 UTC

Size: 116.77 KB

patch

obsolete

>[    0.004000] tsc: Detected 2694.018 MHz processor
>[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5388.03 BogoMIPS (lpj=10776072)
>[    0.004000] pid_max: default: 32768 minimum: 301
>[    0.004000] ACPI: Core revision 20170531
>[    0.012559] ACPI: 5 ACPI AML tables successfully acquired and loaded
>[    0.013175] Security Framework initialized
>[    0.013178] AppArmor: AppArmor disabled by boot time parameter
>[    0.013595] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.013831] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.013843] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.013852] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.014017] CPU: Physical Processor ID: 0
>[    0.014017] CPU: Processor Core ID: 0
>[    0.014021] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.014021] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.014024] mce: CPU supports 7 MCE banks
>[    0.014032] CPU0: Thermal monitoring enabled (TM1)
>[    0.014041] process: using mwait in idle threads
>[    0.014044] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
>[    0.014044] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
>[    0.014130] Freeing SMP alternatives memory: 16K
>[    0.021696] smpboot: Max logical packages: 1
>[    0.022069] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.064000] smpboot: CPU0: Intel(R) Celeron(R) CPU G1820 @ 2.70GHz (family: 0x6, model: 0x3c, stepping: 0x3)
>[    0.064000] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
>[    0.064000] ... version:                3
>[    0.064000] ... bit width:              48
>[    0.064000] ... generic registers:      8
>[    0.064000] ... value mask:             0000ffffffffffff
>[    0.064000] ... max period:             00007fffffffffff
>[    0.064000] ... fixed-purpose events:   3
>[    0.064000] ... event mask:             00000007000000ff
>[    0.064000] Hierarchical SRCU implementation.
>[    0.064000] smp: Bringing up secondary CPUs ...
>[    0.064000] x86: Booting SMP configuration:
>[    0.064000] .... node  #0, CPUs:      #1
>[    0.140018] smp: Brought up 1 node, 2 CPUs
>[    0.140018] smpboot: Total of 2 processors activated (10775.56 BogoMIPS)
>[    0.140032] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.141097] devtmpfs: initialized
>[    0.141097] x86/mm: Memory block size: 128MB
>[    0.141097] PM: Registering ACPI NVS region [mem 0x602fe000-0x60304fff] (28672 bytes)
>[    0.141097] PM: Registering ACPI NVS region [mem 0x778d0000-0x77e0bfff] (5488640 bytes)
>[    0.141097] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
>[    0.141097] futex hash table entries: 512 (order: 3, 32768 bytes)
>[    0.141097] pinctrl core: initialized pinctrl subsystem
>[    0.141097] NET: Registered protocol family 16
>[    0.141097] cpuidle: using governor ladder
>[    0.141097] cpuidle: using governor menu
>[    0.141097] PCCT header not found.
>[    0.141097] ACPI: bus type PCI registered
>[    0.141097] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.141097] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.141097] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.141097] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
>[    0.141097] PCI: Using configuration type 1 for base access
>[    0.141097] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.141097] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
>[    0.141097] mtrr: your CPUs had inconsistent fixed MTRR settings
>[    0.141097] mtrr: probably your BIOS does not setup all CPUs.
>[    0.141097] mtrr: corrected configuration.
>[    0.141097] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
>[    0.141097] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.141097] ACPI: Added _OSI(Module Device)
>[    0.141097] ACPI: Added _OSI(Processor Device)
>[    0.141097] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.141097] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.141097] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.146383] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.146693] ACPI: Dynamic OEM Table Load:
>[    0.146693] ACPI: SSDT 0xFFFF880100D86800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
>[    0.146695] ACPI: Dynamic OEM Table Load:
>[    0.146695] ACPI: SSDT 0xFFFF88010008B800 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
>[    0.146695] ACPI: Dynamic OEM Table Load:
>[    0.146695] ACPI: SSDT 0xFFFF8801003D8600 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
>[    0.146695] ACPI: Interpreter enabled
>[    0.146695] ACPI: (supports S0 S3 S4 S5)
>[    0.146695] ACPI: Using IOAPIC for interrupt routing
>[    0.146695] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.155487] ACPI: Power Resource [FN00] (off)
>[    0.155551] ACPI: Power Resource [FN01] (off)
>[    0.155613] ACPI: Power Resource [FN02] (off)
>[    0.155676] ACPI: Power Resource [FN03] (off)
>[    0.155738] ACPI: Power Resource [FN04] (off)
>[    0.156435] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
>[    0.156439] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.156873] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
>[    0.157166] PCI host bridge to bus 0000:00
>[    0.157168] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.157169] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.157170] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.157171] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
>[    0.157172] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
>[    0.157173] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
>[    0.157174] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
>[    0.157175] pci_bus 0000:00: root bus resource [mem 0x7e200000-0xfeafffff window]
>[    0.157176] pci_bus 0000:00: root bus resource [bus 00-3e]
>[    0.157182] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
>[    0.157259] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
>[    0.157288] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.157385] pci 0000:00:02.0: [8086:0402] type 00 class 0x030000
>[    0.157395] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
>[    0.157400] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.157403] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
>[    0.157488] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
>[    0.157505] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
>[    0.157555] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.157617] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
>[    0.157634] pci 0000:00:16.0: reg 0x10: [mem 0xf7e19000-0xf7e1900f 64bit]
>[    0.157688] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.157753] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
>[    0.157771] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e17000-0xf7e173ff]
>[    0.157844] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.157908] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
>[    0.157925] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
>[    0.157983] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.158049] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
>[    0.158107] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.158200] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
>[    0.158259] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.158350] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
>[    0.158408] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.158504] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
>[    0.158522] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e16000-0xf7e163ff]
>[    0.158595] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.158661] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
>[    0.158809] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
>[    0.158824] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e15000-0xf7e150ff 64bit]
>[    0.158840] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
>[    0.158933] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.158977] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.159037] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
>[    0.159070] pci 0000:03:00.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
>[    0.159187] pci 0000:03:00.0: supports D1
>[    0.159188] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
>[    0.168031] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.168035] pci 0000:00:1c.1:   bridge window [mem 0xf7d00000-0xf7dfffff]
>[    0.168095] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
>[    0.168122] pci 0000:04:00.0: reg 0x10: [io  0xe000-0xe0ff]
>[    0.168148] pci 0000:04:00.0: reg 0x18: [mem 0xf7c00000-0xf7c00fff 64bit]
>[    0.168165] pci 0000:04:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
>[    0.168253] pci 0000:04:00.0: supports D1 D2
>[    0.168254] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.180031] pci 0000:00:1c.2: PCI bridge to [bus 04]
>[    0.180033] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
>[    0.180035] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
>[    0.180039] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
>[    0.180567] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>[    0.180607] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>[    0.180645] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>[    0.180683] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>[    0.180720] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>[    0.180757] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>[    0.180794] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
>[    0.180831] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>[    0.181149] ACPI: Enabled 5 GPEs in block 00 to 3F
>[    0.181201] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    0.181201] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.181201] pci 0000:00:02.0: vgaarb: bridge control possible
>[    0.181201] vgaarb: loaded
>[    0.181201] EDAC MC: Ver: 3.0.0
>[    0.181201] Registered efivars operations
>[    0.184621] PCI: Using ACPI for IRQ routing
>[    0.185840] PCI: pci_cache_line_size set to 64 bytes
>[    0.185871] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    0.185872] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
>[    0.185873] e820: reserve RAM buffer [mem 0x602fe000-0x63ffffff]
>[    0.185874] e820: reserve RAM buffer [mem 0x60750000-0x63ffffff]
>[    0.185874] e820: reserve RAM buffer [mem 0x776b2000-0x77ffffff]
>[    0.185875] e820: reserve RAM buffer [mem 0x79000000-0x7bffffff]
>[    0.185876] e820: reserve RAM buffer [mem 0x100e00000-0x103ffffff]
>[    0.185968] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.185968] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.188011] clocksource: Switched to clocksource hpet
>[    0.192766] VFS: Disk quotas dquot_6.6.0
>[    0.192782] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.192851] pnp: PnP ACPI init
>[    0.192950] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
>[    0.192953] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.193091] system 00:01: [io  0x0680-0x069f] has been reserved
>[    0.193092] system 00:01: [io  0xffff] has been reserved
>[    0.193094] system 00:01: [io  0xffff] has been reserved
>[    0.193095] system 00:01: [io  0xffff] has been reserved
>[    0.193096] system 00:01: [io  0x1c00-0x1cfe] has been reserved
>[    0.193097] system 00:01: [io  0x1d00-0x1dfe] has been reserved
>[    0.193098] system 00:01: [io  0x1e00-0x1efe] has been reserved
>[    0.193099] system 00:01: [io  0x1f00-0x1ffe] has been reserved
>[    0.193100] system 00:01: [io  0x1800-0x18fe] has been reserved
>[    0.193101] system 00:01: [io  0x164e-0x164f] has been reserved
>[    0.193103] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.193123] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.193160] system 00:03: [io  0x1854-0x1857] has been reserved
>[    0.193162] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.193226] system 00:04: [io  0x0290-0x029f] has been reserved
>[    0.193227] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.193264] system 00:05: [io  0x04d0-0x04d1] has been reserved
>[    0.193266] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.193610] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.193611] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.193613] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.193614] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.193615] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.193616] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.193617] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.193619] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.193620] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
>[    0.193622] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    0.193623] system 00:06: [mem 0xf7fef000-0xf7feffff] has been reserved
>[    0.193624] system 00:06: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
>[    0.193626] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.193840] pnp: PnP ACPI: found 7 devices
>[    0.199685] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.199697] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
>[    0.199699] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
>[    0.199701] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
>[    0.199717] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7e200000-0x7e3fffff]
>[    0.199723] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7e400000-0x7e5fffff 64bit pref]
>[    0.199724] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
>[    0.199726] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.199731] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.199733] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>[    0.199736] pci 0000:00:1c.0:   bridge window [mem 0x7e200000-0x7e3fffff]
>[    0.199739] pci 0000:00:1c.0:   bridge window [mem 0x7e400000-0x7e5fffff 64bit pref]
>[    0.199743] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.199746] pci 0000:00:1c.1:   bridge window [mem 0xf7d00000-0xf7dfffff]
>[    0.199752] pci 0000:00:1c.2: PCI bridge to [bus 04]
>[    0.199754] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
>[    0.199757] pci 0000:00:1c.2:   bridge window [mem 0xf7c00000-0xf7cfffff]
>[    0.199759] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
>[    0.199764] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.199765] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.199766] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.199767] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
>[    0.199768] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
>[    0.199769] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
>[    0.199770] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
>[    0.199771] pci_bus 0000:00: resource 11 [mem 0x7e200000-0xfeafffff window]
>[    0.199772] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
>[    0.199773] pci_bus 0000:02: resource 1 [mem 0x7e200000-0x7e3fffff]
>[    0.199774] pci_bus 0000:02: resource 2 [mem 0x7e400000-0x7e5fffff 64bit pref]
>[    0.199775] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
>[    0.199776] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
>[    0.199777] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
>[    0.199778] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
>[    0.199860] NET: Registered protocol family 2
>[    0.199979] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.200020] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
>[    0.200070] TCP: Hash tables configured (established 16384 bind 16384)
>[    0.200092] UDP hash table entries: 1024 (order: 3, 32768 bytes)
>[    0.200100] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
>[    0.200139] NET: Registered protocol family 1
>[    0.200151] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.248085] PCI: CLS 64 bytes, default 64
>[    0.248116] Unpacking initramfs...
>[    0.336911] Freeing initrd memory: 6156K
>[    0.336916] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.336919] software IO TLB [mem 0x63200000-0x67200000] (64MB) mapped at [ffff880063200000-ffff8800671fffff]
>[    0.336987] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
>[    0.336988] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>[    0.336988] RAPL PMU: hw unit of domain package 2^-14 Joules
>[    0.336989] RAPL PMU: hw unit of domain dram 2^-14 Joules
>[    0.336989] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>[    0.337262] audit: initializing netlink subsys (disabled)
>[    0.337307] audit: type=2000 audit(1503317408.337:1): state=initialized audit_enabled=0 res=1
>[    0.337607] workingset: timestamp_bits=56 max_order=19 bucket_order=0
>[    0.337955] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
>[    0.337973] io scheduler noop registered
>[    0.337974] io scheduler deadline registered
>[    0.337978] io scheduler cfq registered (default)
>[    0.337979] io scheduler mq-deadline registered
>[    0.337979] io scheduler kyber registered
>[    0.338526] pcieport 0000:00:01.0: Signaling PME with IRQ 24
>[    0.338540] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
>[    0.338554] pcieport 0000:00:1c.1: Signaling PME with IRQ 26
>[    0.338567] pcieport 0000:00:1c.2: Signaling PME with IRQ 27
>[    0.338578] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
>[    0.338606] efifb: probing for efifb
>[    0.338615] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
>[    0.338616] efifb: mode is 1024x768x32, linelength=4096, pages=1
>[    0.338616] efifb: scrolling: redraw
>[    0.338617] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.340587] Console: switching to colour frame buffer device 128x48
>[    0.342462] fb0: EFI VGA frame buffer device
>[    0.342467] intel_idle: MWAIT substates: 0x2120
>[    0.342468] intel_idle: v0.4.1 model 0x3C
>[    0.342521] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.342588] GHES: HEST is not enabled!
>[    0.342634] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.343116] i8042: PNP: No PS/2 controller found.
>[    0.343200] mousedev: PS/2 mouse device common for all mice
>[    0.343223] rtc_cmos 00:02: RTC can wake from S4
>[    0.343328] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    0.343350] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    0.343364] intel_pstate: Intel P-state driver initializing
>[    0.343476] drop_monitor: Initializing network drop monitor service
>[    0.343679] NET: Registered protocol family 10
>[    0.344199] Segment Routing with IPv6
>[    0.344239] mip6: Mobile IPv6
>[    0.344243] NET: Registered protocol family 17
>[    0.344256] Key type dns_resolver registered
>[    0.344649] microcode: sig=0x306c3, pf=0x2, revision=0x9
>[    0.344762] microcode: Microcode Update Driver: v2.2.
>[    0.344783] sched_clock: Marking stable (344748494, 0)->(447252019, -102503525)
>[    0.345244] registered taskstats version 1
>[    0.346078] rtc_cmos 00:02: setting system clock to 2017-08-21 12:10:09 UTC (1503317409)
>[    0.346219] PM: Hibernation image not present or could not be loaded.
>[    0.349170] Freeing unused kernel memory: 1004K
>[    0.349173] Write protecting the kernel read-only data: 8192k
>[    0.350239] Freeing unused kernel memory: 1732K
>[    0.351177] Freeing unused kernel memory: 112K
>[    0.443047] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
>[    0.443083] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.443084] ACPI: Thermal Zone [TZ00] (28 C)
>[    0.443254] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.443255] ACPI: Thermal Zone [TZ01] (30 C)
>[    0.455015] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[    0.456399] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[    0.456821] ACPI: bus type USB registered
>[    0.456839] usbcore: registered new interface driver usbfs
>[    0.456847] usbcore: registered new interface driver hub
>[    0.456861] usbcore: registered new device driver usb
>[    0.457075] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.457166] ehci-pci: EHCI PCI platform driver
>[    0.457263] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    0.457267] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    0.457277] ehci-pci 0000:00:1a.0: debug port 2
>[    0.461163] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    0.461507] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7e17000
>[    0.468931] r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0xffffc9000001e000, e0:3f:49:0d:d3:c9, XID 0c000800 IRQ 28
>[    0.468933] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>[    0.469550] r8169 0000:04:00.0 enp4s0: renamed from eth0
>[    0.480051] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    0.480088] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.480090] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.480091] usb usb1: Product: EHCI Host Controller
>[    0.480091] usb usb1: Manufacturer: Linux 4.13.0-rc6 ehci_hcd
>[    0.480092] usb usb1: SerialNumber: 0000:00:1a.0
>[    0.480292] hub 1-0:1.0: USB hub found
>[    0.480297] hub 1-0:1.0: 2 ports detected
>[    0.480505] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    0.480509] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.480518] ehci-pci 0000:00:1d.0: debug port 2
>[    0.484415] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    0.484481] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e16000
>[    0.500061] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    0.500115] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.500118] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.500120] usb usb2: Product: EHCI Host Controller
>[    0.500121] usb usb2: Manufacturer: Linux 4.13.0-rc6 ehci_hcd
>[    0.500123] usb usb2: SerialNumber: 0000:00:1d.0
>[    0.500436] hub 2-0:1.0: USB hub found
>[    0.500445] hub 2-0:1.0: 2 ports detected
>[    0.501010] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.501019] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    0.502103] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
>[    0.502109] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    0.502215] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.502217] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.502219] usb usb3: Product: xHCI Host Controller
>[    0.502221] usb usb3: Manufacturer: Linux 4.13.0-rc6 xhci-hcd
>[    0.502222] usb usb3: SerialNumber: 0000:00:14.0
>[    0.502398] hub 3-0:1.0: USB hub found
>[    0.502412] hub 3-0:1.0: 10 ports detected
>[    0.504410] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.504415] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
>[    0.504459] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    0.504461] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.504463] usb usb4: Product: xHCI Host Controller
>[    0.504464] usb usb4: Manufacturer: Linux 4.13.0-rc6 xhci-hcd
>[    0.504466] usb usb4: SerialNumber: 0000:00:14.0
>[    0.504772] hub 4-0:1.0: USB hub found
>[    0.504782] hub 4-0:1.0: 2 ports detected
>[    0.523266] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com
>[    0.534385] CPU feature 'AVX registers' is not supported.
>[    0.808026] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    0.828021] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    0.832028] usb 3-9: new high-speed USB device number 2 using xhci_hcd
>[    0.956432] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
>[    0.956437] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    0.956826] hub 1-1:1.0: USB hub found
>[    0.956880] hub 1-1:1.0: 4 ports detected
>[    0.975693] usb 3-9: New USB device found, idVendor=04fc, idProduct=0c25
>[    0.975698] usb 3-9: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[    0.975701] usb 3-9: Product: USB to Serial-ATA bridge
>[    0.975703] usb 3-9: Manufacturer: Sunplus Technology Co.,Ltd.
>[    0.975706] usb 3-9: SerialNumber: FAFFFFF0FFF10FFD0F462212
>[    0.980414] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
>[    0.980420] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    0.981319] hub 2-1:1.0: USB hub found
>[    0.981384] hub 2-1:1.0: 6 ports detected
>[    0.982146] SCSI subsystem initialized
>[    0.983662] usb-storage 3-9:1.0: USB Mass Storage device detected
>[    0.986714] scsi host0: usb-storage 3-9:1.0
>[    0.986916] usbcore: registered new interface driver usb-storage
>[    1.096013] usb 3-10: new low-speed USB device number 3 using xhci_hcd
>[    1.240047] usb 3-10: New USB device found, idVendor=13ba, idProduct=0018
>[    1.240052] usb 3-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    1.240055] usb 3-10: Product: Barcode Reader 
>[    1.251412] usbcore: registered new interface driver usbhid
>[    1.251414] usbhid: USB HID core driver
>[    1.252107] input: Barcode Reader  as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:13BA:0018.0001/input/input0
>[    1.312104] hid-generic 0003:13BA:0018.0001: input: USB HID v1.10 Keyboard [Barcode Reader ] on usb-0000:00:14.0-10/input0
>[    1.312480] input: Barcode Reader  as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/0003:13BA:0018.0002/input/input1
>[    1.343986] tsc: Refined TSC clocksource calibration: 2693.761 MHz
>[    1.343994] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d438c619d, max_idle_ns: 440795237946 ns
>[    1.372183] hid-generic 0003:13BA:0018.0002: input: USB HID v1.10 Mouse [Barcode Reader ] on usb-0000:00:14.0-10/input1
>[    2.022610] scsi 0:0:0:0: Direct-Access     SAMSUNG  HM160HI               PQ: 0 ANSI: 2
>[    2.039671] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>[    2.041576] sd 0:0:0:0: [sda] Write Protect is off
>[    2.041582] sd 0:0:0:0: [sda] Mode Sense: 38 00 00 00
>[    2.043522] sd 0:0:0:0: [sda] No Caching mode page found
>[    2.043606] sd 0:0:0:0: [sda] Assuming drive cache: write through
>[    2.368085] clocksource: Switched to clocksource tsc
>[    3.624591]  sda: sda1 sda2 sda3 sda4 sda5 sda6
>[    3.640401] sd 0:0:0:0: [sda] Attached SCSI disk
>[    4.424322] PM: Starting manual resume from disk
>[    4.424326] PM: Hibernation image partition 8:6 present
>[    4.424327] PM: Looking for hibernation image.
>[    4.424724] PM: Image not found (code -22)
>[    4.424725] PM: Hibernation image not present or could not be loaded.
>[    4.825212] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    6.331815] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
>[    6.587298] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    6.772404] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
>[    6.772658] systemd[1]: Detected architecture x86-64.
>[    6.790422] systemd[1]: Set hostname to <usbk>.
>[    8.147897] systemd[1]: ModemManager.service: Cannot add dependency job, ignoring: Unit ModemManager.service is masked.
>[    8.149130] systemd[1]: Listening on fsck to fsckd communication Socket.
>[    8.149532] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
>[    8.149614] systemd[1]: Listening on udev Kernel Socket.
>[    8.149695] systemd[1]: Listening on Journal Socket (/dev/log).
>[    8.149772] systemd[1]: Listening on Journal Socket.
>[    8.149813] systemd[1]: Reached target Remote File Systems.
>[    8.485420] lp: driver loaded but no devices found
>[    8.532814] ppdev: user-space parallel port driver
>[    8.594446] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
>[    8.768434] systemd-journald[235]: Received request to flush runtime journal from PID 1
>[   11.080683] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>[   11.080693] ACPI: Power Button [PWRB]
>[   11.080747] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>[   11.080755] ACPI: Power Button [PWRF]
>[   11.206484] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170531/utaddress-247)
>[   11.206489] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   11.206491] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247)
>[   11.206494] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   11.206495] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170531/utaddress-247)
>[   11.206497] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247)
>[   11.206500] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   11.206500] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170531/utaddress-247)
>[   11.206503] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247)
>[   11.206506] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   11.206506] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[   11.363743] input: PC Speaker as /devices/platform/pcspkr/input/input4
>[   11.437532] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[   11.523133] iTCO_vendor_support: vendor-support=0
>[   11.709217] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[   11.709254] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
>[   11.709328] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   12.361197] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
>[   12.361200] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   12.361201] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[   12.361202] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[   12.361203] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
>[   12.361204] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[   12.361205] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
>[   12.361206] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
>[   12.361207] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
>[   12.372650] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
>[   12.372693] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
>[   12.372731] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>[   12.372767] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>[   12.372803] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>[   12.997674] ath: EEPROM regdomain: 0x809c
>[   12.997675] ath: EEPROM indicates we should expect a country code
>[   12.997676] ath: doing EEPROM country->regdmn map search
>[   12.997676] ath: country maps to regdmn code: 0x52
>[   12.997677] ath: Country alpha2 being used: CN
>[   12.997677] ath: Regpair used: 0x52
>[   13.167313] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[   13.167648] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000680000, irq=17
>[   13.486456] [drm:i915_driver_load [i915]] Found LynxPoint PCH
>[   13.486490] [drm:intel_power_domains_init [i915]] Allowed DC state mask 00
>[   13.486533] [drm:intel_device_info_dump [i915]] i915 device info: platform=HASWELL gen=7 pciid=0x0402 rev=0x06
>[   13.486565] [drm:intel_device_info_dump [i915]] i915 device info: is_mobile: no
>[   13.486599] [drm:intel_device_info_dump [i915]] i915 device info: is_lp: no
>[   13.486634] [drm:intel_device_info_dump [i915]] i915 device info: is_alpha_support: no
>[   13.486668] [drm:intel_device_info_dump [i915]] i915 device info: has_64bit_reloc: no
>[   13.486702] [drm:intel_device_info_dump [i915]] i915 device info: has_aliasing_ppgtt: yes
>[   13.486737] [drm:intel_device_info_dump [i915]] i915 device info: has_csr: no
>[   13.486771] [drm:intel_device_info_dump [i915]] i915 device info: has_ddi: yes
>[   13.486805] [drm:intel_device_info_dump [i915]] i915 device info: has_dp_mst: yes
>[   13.486838] [drm:intel_device_info_dump [i915]] i915 device info: has_fbc: yes
>[   13.486873] [drm:intel_device_info_dump [i915]] i915 device info: has_fpga_dbg: yes
>[   13.486907] [drm:intel_device_info_dump [i915]] i915 device info: has_full_ppgtt: yes
>[   13.486941] [drm:intel_device_info_dump [i915]] i915 device info: has_full_48bit_ppgtt: no
>[   13.486976] [drm:intel_device_info_dump [i915]] i915 device info: has_gmbus_irq: yes
>[   13.487010] [drm:intel_device_info_dump [i915]] i915 device info: has_gmch_display: no
>[   13.487044] [drm:intel_device_info_dump [i915]] i915 device info: has_guc: no
>[   13.487078] [drm:intel_device_info_dump [i915]] i915 device info: has_guc_ct: no
>[   13.487113] [drm:intel_device_info_dump [i915]] i915 device info: has_hotplug: yes
>[   13.487147] [drm:intel_device_info_dump [i915]] i915 device info: has_l3_dpf: yes
>[   13.487181] [drm:intel_device_info_dump [i915]] i915 device info: has_llc: yes
>[   13.487216] [drm:intel_device_info_dump [i915]] i915 device info: has_logical_ring_contexts: no
>[   13.487250] [drm:intel_device_info_dump [i915]] i915 device info: has_overlay: no
>[   13.487284] [drm:intel_device_info_dump [i915]] i915 device info: has_pipe_cxsr: no
>[   13.487318] [drm:intel_device_info_dump [i915]] i915 device info: has_pooled_eu: no
>[   13.487352] [drm:intel_device_info_dump [i915]] i915 device info: has_psr: yes
>[   13.487387] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6: yes
>[   13.487421] [drm:intel_device_info_dump [i915]] i915 device info: has_rc6p: no
>[   13.487455] [drm:intel_device_info_dump [i915]] i915 device info: has_resource_streamer: yes
>[   13.487489] [drm:intel_device_info_dump [i915]] i915 device info: has_runtime_pm: yes
>[   13.487523] [drm:intel_device_info_dump [i915]] i915 device info: has_snoop: no
>[   13.487557] [drm:intel_device_info_dump [i915]] i915 device info: unfenced_needs_alignment: no
>[   13.487591] [drm:intel_device_info_dump [i915]] i915 device info: cursor_needs_physical: no
>[   13.487626] [drm:intel_device_info_dump [i915]] i915 device info: hws_needs_physical: no
>[   13.487660] [drm:intel_device_info_dump [i915]] i915 device info: overlay_needs_physical: no
>[   13.487693] [drm:i915_driver_load [i915]] i915 device info: supports_tv: no
>[   13.487727] [drm] PipeC fused off
>[   13.487762] [drm:intel_device_info_runtime_init [i915]] slice mask: 0000
>[   13.487796] [drm:intel_device_info_runtime_init [i915]] slice total: 0
>[   13.487830] [drm:intel_device_info_runtime_init [i915]] subslice total: 0
>[   13.487864] [drm:intel_device_info_runtime_init [i915]] subslice mask 0000
>[   13.487898] [drm:intel_device_info_runtime_init [i915]] subslice per slice: 0
>[   13.487931] [drm:intel_device_info_runtime_init [i915]] EU total: 0
>[   13.487976] [drm:intel_device_info_runtime_init [i915]] EU per subslice: 0
>[   13.488009] [drm:intel_device_info_runtime_init [i915]] has slice power gating: n
>[   13.488044] [drm:intel_device_info_runtime_init [i915]] has subslice power gating: n
>[   13.488077] [drm:i915_driver_load [i915]] has EU power gating: n
>[   13.488111] [drm:i915_driver_load [i915]] ppgtt mode: 1
>[   13.488146] [drm:i915_driver_load [i915]] use GPU semaphores? yes
>[   13.490509] [drm] Memory usable by graphics device = 2048M
>[   13.490560] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
>[   13.490592] [drm:i915_ggtt_probe_hw [i915]] GTT stolen size = 64M
>[   13.490594] checking generic (e0000000 300000) vs hw (e0000000 10000000)
>[   13.490595] fb: switching to inteldrmfb from EFI VGA
>[   13.490629] Console: switching to colour dummy device 80x25
>[   13.491025] [drm] Replacing VGA console driver
>[   13.491292] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K
>[   13.491338] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x77b04018
>[   13.491391] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[   13.491429] [drm:intel_opregion_setup [i915]] SWSCI supported
>[   13.497567] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[   13.497606] [drm:intel_opregion_setup [i915]] ASLE supported
>[   13.497645] [drm:intel_opregion_setup [i915]] ASLE extension supported
>[   13.497683] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[   13.497727] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[   13.497728] [drm] Driver supports precise vblank timestamp query.
>[   13.497768] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
>[   13.497807] [drm:intel_bios_init [i915]] VBT signature "$VBT HASWELL        ", BDB version 170
>[   13.497847] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[   13.497886] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
>[   13.499966] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)
>[   13.500033] [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
>[   13.500066] [drm:intel_bios_init [i915]] DRRS supported mode is static
>[   13.500140] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
>[   13.500149] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[   13.500181] [drm:intel_bios_init [i915]] VBT initial LVDS value 300
>[   13.500212] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0
>[   13.500252] [drm:intel_bios_init [i915]] Found SDVO panel mode in BIOS VBT tables:
>[   13.500260] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[   13.500303] [drm:intel_bios_init [i915]] No SDVO device info is found in VBT
>[   13.500345] [drm:intel_bios_init [i915]] DRRS State Enabled:1
>[   13.500390] [drm:intel_bios_init [i915]] Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[   13.500432] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 10
>[   13.500481] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
>[   13.500521] [drm:i915_driver_load [i915]] rawclk rate: 125000 kHz
>[   13.500562] [drm:intel_power_well_enable [i915]] enabling always-on
>[   13.500600] [drm:intel_power_well_enable [i915]] enabling display
>[   13.500854] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 0
>[   13.500894] [drm:intel_print_wm_latency [i915]] Primary WM0 latency 20 (2.0 usec)
>[   13.500932] [drm:intel_print_wm_latency [i915]] Primary WM1 latency 4 (2.0 usec)
>[   13.500971] [drm:intel_print_wm_latency [i915]] Primary WM2 latency 36 (18.0 usec)
>[   13.501009] [drm:intel_print_wm_latency [i915]] Primary WM3 latency 90 (45.0 usec)
>[   13.501047] [drm:intel_print_wm_latency [i915]] Primary WM4 latency 160 (80.0 usec)
>[   13.501085] [drm:intel_print_wm_latency [i915]] Sprite WM0 latency 20 (2.0 usec)
>[   13.501123] [drm:intel_print_wm_latency [i915]] Sprite WM1 latency 4 (2.0 usec)
>[   13.501162] [drm:intel_print_wm_latency [i915]] Sprite WM2 latency 36 (18.0 usec)
>[   13.501200] [drm:intel_print_wm_latency [i915]] Sprite WM3 latency 90 (45.0 usec)
>[   13.501238] [drm:intel_print_wm_latency [i915]] Sprite WM4 latency 160 (80.0 usec)
>[   13.501276] [drm:intel_print_wm_latency [i915]] Cursor WM0 latency 20 (2.0 usec)
>[   13.501314] [drm:intel_print_wm_latency [i915]] Cursor WM1 latency 4 (2.0 usec)
>[   13.501352] [drm:intel_print_wm_latency [i915]] Cursor WM2 latency 36 (18.0 usec)
>[   13.501391] [drm:intel_print_wm_latency [i915]] Cursor WM3 latency 90 (45.0 usec)
>[   13.501429] [drm:intel_print_wm_latency [i915]] Cursor WM4 latency 160 (80.0 usec)
>[   13.501472] [drm:intel_modeset_init [i915]] 2 display pipes available.
>[   13.501532] [drm:intel_update_cdclk [i915]] Current CD clock rate: 540000 kHz, VCO: 0 kHz, ref: 0 kHz
>[   13.501589] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 540000 kHz
>[   13.501633] [drm:intel_modeset_init [i915]] Max dotclock rate: 540000 kHz
>[   13.501636] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[   13.501986] [drm:intel_crt_reset [i915]] crt adpa set to 0x80f40000
>[   13.502031] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C
>[   13.502073] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT)
>[   13.502120] [drm:intel_modeset_init [i915]] VBT says port D is not DVI/HDMI/DP compatible, respect it
>[   13.502374] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1
>[   13.502429] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:32:pipe A] hw state readout: enabled
>[   13.502473] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
>[   13.502515] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe B] hw state readout: disabled
>[   13.502562] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[   13.502600] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[   13.502644] [drm:intel_modeset_setup_hw_state [i915]] SPLL hw state readout: crtc_mask 0x00000001, on 1
>[   13.502687] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1
>[   13.502730] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1
>[   13.502773] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1
>[   13.502833] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:41:CRT] hw state readout: enabled, pipe A
>[   13.502877] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:42:DDI C] hw state readout: disabled, pipe A
>[   13.502920] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:40:VGA-1] hw state readout: enabled
>[   13.502968] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:43:HDMI-A-1] hw state readout: disabled
>[   13.503018] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][setup_hw_state]
>[   13.503064] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[   13.503108] [drm:intel_dump_m_n_config.isra.52 [i915]] fdi: lanes: 1; gmch_m: 6058439, gmch_n: 8388608, link_m: 126217, link_n: 524288, tu: 64
>[   13.503150] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   13.503193] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   13.503202] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 60 65011 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   13.503244] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   13.503252] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 60 65011 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   13.503295] [drm:intel_dump_pipe_config [i915]] crtc timings: 65011 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa
>[   13.503338] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1024x768, pixel rate 65011
>[   13.503379] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x04000300, enabled
>[   13.503414] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   13.503447] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[   13.503489] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   13.503532] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] disabled, scaler_id = 0
>[   13.503574] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[   13.503619] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0
>[   13.503662] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe B][setup_hw_state]
>[   13.503703] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[   13.503744] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   13.503787] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   13.503795] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   13.503837] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   13.503845] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   13.503888] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   13.503930] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[   13.503979] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   13.504021] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   13.504064] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[   13.504106] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   13.504149] [drm:intel_dump_pipe_config [i915]] [PLANE:33:primary B] disabled, scaler_id = 0
>[   13.504192] [drm:intel_dump_pipe_config [i915]] [PLANE:35:sprite B] disabled, scaler_id = 0
>[   13.504234] [drm:intel_dump_pipe_config [i915]] [PLANE:37:cursor B] disabled, scaler_id = 0
>[   13.504277] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 enabled but not in use, disabling
>[   13.504320] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 enabled but not in use, disabling
>[   13.504362] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 enabled but not in use, disabling
>[   13.504434] [drm:ironlake_get_initial_plane_config [i915]] pipe A with fb: size=1024x768@32, offset=0, pitch 4096, size 0x300000
>[   13.504476] [drm:i915_gem_object_create_stolen_for_preallocated [i915]] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=300000
>[   13.504525] [drm:intel_alloc_initial_plane_obj.isra.84 [i915]] initial plane fb obj ffff88006a764340
>[   13.504576] [drm:intel_modeset_init [i915]] pipe A active planes 0x1
>[   13.504644] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [301000, 80000000]
>[   13.506119] [drm:i915_ppgtt_create [i915]] Allocated pde space (2M) at GTT entry: 7fe00
>[   13.506158] [drm:i915_ppgtt_create [i915]] Adding PPGTT at offset 7fe00000
>[   13.506197] [drm:i915_gem_context_init [i915]] logical context support initialized
>[   13.506357] [drm:intel_init_ring_buffer [i915]] rcs0 hws offset: 0x00301000
>[   13.506403] [drm:intel_engine_create_scratch [i915]] rcs0 pipe control offset: 0x7fdee000
>[   13.506473] [drm:intel_init_ring_buffer [i915]] bcs0 hws offset: 0x00322000
>[   13.506537] [drm:intel_init_ring_buffer [i915]] vcs0 hws offset: 0x00343000
>[   13.506602] [drm:intel_init_ring_buffer [i915]] vecs0 hws offset: 0x00364000
>[   13.506662] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 0
>[   13.506741] [drm:sandybridge_pcode_read [i915]] warning: pcode (read) mailbox access failed: -6
>[   13.506781] [drm:intel_init_gt_powersave [i915]] Overclocking supported, max: 1050MHz, overclock: 1050MHz
>[   13.506825] [drm:intel_fbdev_init [i915]] found possible fb from plane A
>[   13.506869] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
>[   13.506914] [drm:intel_fbdev_init [i915]] checking plane A for BIOS fb
>[   13.506960] [drm:intel_fbdev_init [i915]] pipe A area: 1024x768, bpp: 32, size: 3145728
>[   13.507004] [drm:intel_fbdev_init [i915]] fb big enough for plane A (3145728 >= 3145728)
>[   13.507049] [drm:intel_fbdev_init [i915]] pipe B not active, skipping
>[   13.507094] [drm:intel_fbdev_init [i915]] using BIOS fb for initial console
>[   13.507153] [drm:intel_crt_detect [i915]] [CONNECTOR:40:VGA-1] force=0
>[   13.507201] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40000
>[   13.507377] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
>[   13.507495] [drm:intel_opregion_register [i915]] 2 outputs detected
>[   13.508384] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[   13.508735] [drm:asle_work [i915]] bclp = 0x80000002
>[   13.508910] acpi device:62: registered as cooling_device2
>[   13.508981] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
>[   13.517298] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1
>[   13.517330] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[   13.517337] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:40:VGA-1] status updated from unknown to connected
>[   13.517372] [drm:intel_hdmi_detect [i915]] [CONNECTOR:43:HDMI-A-1]
>[   13.519439] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   13.519474] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   13.521558] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   13.521568] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   13.523647] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   13.523698] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   13.525794] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   13.525805] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   13.525814] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1] status updated from unknown to disconnected
>[   13.525889] [drm:asle_work [i915]] updating opregion backlight 2/255
>[   13.525934] [drm:asle_work [i915]] No request on ASLC interrupt 0x00000000
>[   13.525940] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[   13.525944] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1]
>[   13.525987] [drm:intel_crt_detect [i915]] [CONNECTOR:40:VGA-1] force=1
>[   13.526040] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40000, result 1
>[   13.526092] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[   13.563974] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[   13.563986] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1] probed modes :
>[   13.563993] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[   13.563999] [drm:drm_mode_debug_printmodeline [drm]] Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   13.564005] [drm:drm_mode_debug_printmodeline [drm]] Modeline 57:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   13.564010] [drm:drm_mode_debug_printmodeline [drm]] Modeline 58:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[   13.564015] [drm:drm_mode_debug_printmodeline [drm]] Modeline 59:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   13.564020] [drm:drm_mode_debug_printmodeline [drm]] Modeline 60:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   13.564025] [drm:drm_mode_debug_printmodeline [drm]] Modeline 52:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   13.564030] [drm:drm_mode_debug_printmodeline [drm]] Modeline 53:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   13.564035] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[   13.564040] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"720x400" 70 28320 720 738 846 900 400 413 415 449 0x40 0x6
>[   13.564045] [drm:drm_mode_debug_printmodeline [drm]] Modeline 55:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   13.564049] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1]
>[   13.564100] [drm:intel_hdmi_detect [i915]] [CONNECTOR:43:HDMI-A-1]
>[   13.566172] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   13.566208] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   13.567991] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   13.568001] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   13.570099] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   13.570148] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   13.571988] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   13.571997] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   13.572002] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1] disconnected
>[   13.572008] [drm:drm_setup_crtcs [drm_kms_helper]] connector 40 enabled? yes
>[   13.572011] [drm:drm_setup_crtcs [drm_kms_helper]] connector 43 enabled? no
>[   13.572065] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[   13.572070] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 40
>[   13.572075] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 40 0
>[   13.572078] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 1280x1024
>[   13.572082] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config
>[   13.572088] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 1280x1024 set on crtc 32 (0,0)
>[   13.572143] [drm:intelfb_create [i915]] BIOS fb too small (1024x768), we require (1280x1024), releasing it
>[   13.572205] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
>[   13.572869] [drm:intelfb_create [i915]] allocated 1280x1024 fb: 0x00385000
>[   13.573016] fbcon: inteldrmfb (fb0) is primary device
>[   13.573148] [drm:intel_atomic_check [i915]] [CONNECTOR:40:VGA-1] checking for sink bpp constrains
>[   13.573201] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24
>[   13.573256] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 2
>[   13.573310] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[   13.573362] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset]
>[   13.573407] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[   13.573458] [drm:intel_dump_m_n_config.isra.52 [i915]] fdi: lanes: 2; gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
>[   13.573501] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   13.573541] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   13.573551] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[   13.573589] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   13.573599] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[   13.573650] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x48 flags: 0x5
>[   13.573702] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000
>[   13.573755] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   13.573808] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   13.573860] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[   13.573911] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   13.573960] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] FB:48, fb = 1024x768 format = XR24 little-endian (0x34325258)
>[   13.574002] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[   13.574043] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0
>[   13.574098] [drm:intel_find_shared_dpll [i915]] [CRTC:32:pipe A] allocated SPLL
>[   13.574140] [drm:intel_reference_shared_dpll [i915]] using SPLL for pipe A
>[   13.574209] [drm:intel_disable_pipe [i915]] disabling pipe A
>[   13.606060] [drm:intel_disable_shared_dpll [i915]] disable SPLL (active 1, on? 1) for crtc 32
>[   13.606100] [drm:intel_disable_shared_dpll [i915]] disabling SPLL
>[   13.606144] [drm:intel_atomic_commit_tail [i915]] [ENCODER:41:CRT]
>[   13.606184] [drm:intel_atomic_commit_tail [i915]] [ENCODER:42:DDI C]
>[   13.606223] [drm:verify_single_dpll_state.isra.78 [i915]] WRPLL 1
>[   13.606263] [drm:verify_single_dpll_state.isra.78 [i915]] WRPLL 2
>[   13.606302] [drm:verify_single_dpll_state.isra.78 [i915]] SPLL
>[   13.606341] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 810
>[   13.606379] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 1350
>[   13.606418] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 2700
>[   13.606461] [drm:intel_enable_shared_dpll [i915]] enable SPLL (active 1, on? 0) for crtc 32
>[   13.606500] [drm:intel_enable_shared_dpll [i915]] enabling SPLL
>[   13.607420] [drm:hsw_fdi_link_train [i915]] FDI link training done on step 0
>[   13.607495] [drm:intel_enable_pipe [i915]] enabling pipe A
>[   13.607547] [drm:haswell_crtc_enable [i915]] iCLKIP clock: found settings for 108000KHz refresh rate: auxdiv=0, divsel=17, phasedir=0, phaseinc=0
>[   13.657728] [drm:verify_connector_state.isra.77 [i915]] [CONNECTOR:40:VGA-1]
>[   13.657798] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A]
>[   13.657893] [drm:verify_single_dpll_state.isra.78 [i915]] SPLL
>[   13.657973] Console: switching to colour frame buffer device 160x64
>[   13.677552] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[   13.945325] [drm:asle_work [i915]] bclp = 0x80000033
>[   13.945343] [drm:asle_work [i915]] updating opregion backlight 51/255
>[   14.335113] Adding 2097148k swap on /dev/sda6.  Priority:-1 extents:1 across:2097148k 
>[   14.815996] [drm:intel_enable_gt_powersave [i915]] Enabling RC6 states: RC6 on
>[   14.816025] [drm:sandybridge_pcode_read [i915]] warning: pcode (read) mailbox access failed: -6
>[   15.540655] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   25.226116] [drm:drm_mode_addfb2 [drm]] [FB:47]
>[   26.504663] [drm:intel_engine_cmd_parser [i915]] CMD: Rejected register 0x00002360 in command: 0x11000001 (rcs0)
>[   26.543520] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1]
>[   26.543584] [drm:intel_crt_detect [i915]] [CONNECTOR:40:VGA-1] force=1
>[   26.543642] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40018, result 1
>[   26.543691] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[   26.581989] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[   26.582004] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1] probed modes :
>[   26.582011] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[   26.582017] [drm:drm_mode_debug_printmodeline [drm]] Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   26.582022] [drm:drm_mode_debug_printmodeline [drm]] Modeline 57:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   26.582027] [drm:drm_mode_debug_printmodeline [drm]] Modeline 58:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[   26.582032] [drm:drm_mode_debug_printmodeline [drm]] Modeline 59:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   26.582037] [drm:drm_mode_debug_printmodeline [drm]] Modeline 60:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   26.582042] [drm:drm_mode_debug_printmodeline [drm]] Modeline 52:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   26.582047] [drm:drm_mode_debug_printmodeline [drm]] Modeline 53:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   26.582052] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[   26.582057] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"720x400" 70 28320 720 738 846 900 400 413 415 449 0x40 0x6
>[   26.582062] [drm:drm_mode_debug_printmodeline [drm]] Modeline 55:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   26.583389] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1]
>[   26.583410] [drm:intel_hdmi_detect [i915]] [CONNECTOR:43:HDMI-A-1]
>[   26.585468] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   26.585483] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   26.587537] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   26.587545] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   26.589604] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   26.589619] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   26.591676] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   26.591681] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   26.591685] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1] disconnected
>[   26.591772] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1]
>[   26.591789] [drm:intel_crt_detect [i915]] [CONNECTOR:40:VGA-1] force=1
>[   26.591806] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40018, result 1
>[   26.591820] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[   26.630094] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[   26.630125] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1] probed modes :
>[   26.630143] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[   26.630159] [drm:drm_mode_debug_printmodeline [drm]] Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   26.630173] [drm:drm_mode_debug_printmodeline [drm]] Modeline 57:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   26.630187] [drm:drm_mode_debug_printmodeline [drm]] Modeline 58:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[   26.630200] [drm:drm_mode_debug_printmodeline [drm]] Modeline 59:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   26.630214] [drm:drm_mode_debug_printmodeline [drm]] Modeline 60:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   26.630228] [drm:drm_mode_debug_printmodeline [drm]] Modeline 52:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   26.630241] [drm:drm_mode_debug_printmodeline [drm]] Modeline 53:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   26.630254] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[   26.630268] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"720x400" 70 28320 720 738 846 900 400 413 415 449 0x40 0x6
>[   26.630281] [drm:drm_mode_debug_printmodeline [drm]] Modeline 55:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   26.631171] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1]
>[   26.631217] [drm:intel_hdmi_detect [i915]] [CONNECTOR:43:HDMI-A-1]
>[   26.633311] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   26.633351] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   26.635444] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   26.635464] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   26.637561] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   26.637606] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   26.639680] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   26.639695] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   26.639705] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1] disconnected
>[   27.703155] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   27.703177] [drm:drm_mode_setcrtc [drm]] [CRTC:32:pipe A]
>[   27.703197] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:40:VGA-1]
>[   27.736400] [drm:drm_mode_setcrtc [drm]] [CRTC:39:pipe B]
>[   29.269037] [drm:intel_engine_cmd_parser [i915]] CMD: Rejected register 0x00002360 in command: 0x11000001 (rcs0)
>[   34.880123] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   34.900763] [drm:drm_mode_addfb2 [drm]] [FB:64]
>[   34.917459] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   34.934126] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   34.950810] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   34.967447] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   34.984138] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   35.000797] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   35.017457] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   35.034122] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   35.050779] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   35.067440] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   35.415518] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   35.940095] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   36.464914] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   36.990560] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   37.165315] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   37.200369] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   37.538689] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   37.553891] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   37.570122] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   37.586359] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   37.601301] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   37.618274] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   37.633995] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   37.650452] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   37.666484] [drm:drm_mode_addfb2 [drm]] [FB:63]
>[   37.714001] [drm:drm_mode_addfb2 [drm]] [FB:48]
>[   42.558092] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1]
>[   42.558120] [drm:intel_crt_detect [i915]] [CONNECTOR:40:VGA-1] force=1
>[   42.558140] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40018, result 1
>[   42.558154] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[   42.597497] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[   42.597513] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1] probed modes :
>[   42.597520] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[   42.597526] [drm:drm_mode_debug_printmodeline [drm]] Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   42.597531] [drm:drm_mode_debug_printmodeline [drm]] Modeline 57:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   42.597536] [drm:drm_mode_debug_printmodeline [drm]] Modeline 58:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[   42.597542] [drm:drm_mode_debug_printmodeline [drm]] Modeline 59:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   42.597547] [drm:drm_mode_debug_printmodeline [drm]] Modeline 60:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   42.597552] [drm:drm_mode_debug_printmodeline [drm]] Modeline 52:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   42.597557] [drm:drm_mode_debug_printmodeline [drm]] Modeline 53:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   42.597562] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[   42.597567] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"720x400" 70 28320 720 738 846 900 400 413 415 449 0x40 0x6
>[   42.597572] [drm:drm_mode_debug_printmodeline [drm]] Modeline 55:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   42.597775] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1]
>[   42.597801] [drm:intel_hdmi_detect [i915]] [CONNECTOR:43:HDMI-A-1]
>[   42.599847] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   42.599862] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   42.601906] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   42.601914] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   42.603979] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   42.603995] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   42.606054] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   42.606058] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   42.606062] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1] disconnected
>[   42.606210] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1]
>[   42.606228] [drm:intel_crt_detect [i915]] [CONNECTOR:40:VGA-1] force=1
>[   42.606246] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40018, result 1
>[   42.606260] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[   42.643958] [drm:drm_edid_to_eld [drm]] ELD: no CEA Extension found
>[   42.643972] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:40:VGA-1] probed modes :
>[   42.643979] [drm:drm_mode_debug_printmodeline [drm]] Modeline 50:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[   42.643985] [drm:drm_mode_debug_printmodeline [drm]] Modeline 56:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[   42.643990] [drm:drm_mode_debug_printmodeline [drm]] Modeline 57:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[   42.643995] [drm:drm_mode_debug_printmodeline [drm]] Modeline 58:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[   42.644000] [drm:drm_mode_debug_printmodeline [drm]] Modeline 59:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   42.644005] [drm:drm_mode_debug_printmodeline [drm]] Modeline 60:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[   42.644010] [drm:drm_mode_debug_printmodeline [drm]] Modeline 52:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[   42.644015] [drm:drm_mode_debug_printmodeline [drm]] Modeline 53:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[   42.644020] [drm:drm_mode_debug_printmodeline [drm]] Modeline 54:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[   42.644025] [drm:drm_mode_debug_printmodeline [drm]] Modeline 51:"720x400" 70 28320 720 738 846 900 400 413 415 449 0x40 0x6
>[   42.644030] [drm:drm_mode_debug_printmodeline [drm]] Modeline 55:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[   42.644201] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1]
>[   42.644219] [drm:intel_hdmi_detect [i915]] [CONNECTOR:43:HDMI-A-1]
>[   42.646263] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   42.646277] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   42.648091] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   42.648098] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   42.650140] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   42.650155] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   42.651990] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   42.651995] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   42.651999] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1] disconnected
>[   44.058659] fuse init (API version 7.26)
>[   51.104192] random: crng init done
>[   81.075416] PM: Hibernation mode set to 'platform'
>[   81.100380] PM: Syncing filesystems ... 
>[   81.123719] PM: done.
>[   81.123720] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[   81.125010] OOM killer disabled.
>[   81.125042] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[   81.125043] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
>[   81.125043] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
>[   81.125045] PM: Marking nosave pages: [mem 0x602fe000-0x60304fff]
>[   81.125046] PM: Marking nosave pages: [mem 0x60750000-0x60b67fff]
>[   81.125060] PM: Marking nosave pages: [mem 0x776b2000-0x78ffefff]
>[   81.125141] PM: Marking nosave pages: [mem 0x79000000-0xffffffff]
>[   81.126858] PM: Basic memory bitmaps created
>[   81.127022] PM: Preallocating image memory... done (allocated 162275 pages)
>[   81.192759] PM: Allocated 649100 kbytes in 0.06 seconds (10818.33 MB/s)
>[   81.192760] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[   81.194004] Suspending console(s) (use no_console_suspend to debug)
>[   81.228145] [drm:intel_disable_pipe [i915]] disabling pipe A
>[   81.252654] [drm:intel_disable_shared_dpll [i915]] disable SPLL (active 1, on? 1) for crtc 32
>[   81.252687] [drm:intel_disable_shared_dpll [i915]] disabling SPLL
>[   81.252723] [drm:intel_atomic_commit_tail [i915]] [ENCODER:41:CRT]
>[   81.252755] [drm:intel_atomic_commit_tail [i915]] [ENCODER:42:DDI C]
>[   81.252787] [drm:verify_connector_state.isra.77 [i915]] [CONNECTOR:40:VGA-1]
>[   81.252819] [drm:verify_single_dpll_state.isra.78 [i915]] WRPLL 1
>[   81.252851] [drm:verify_single_dpll_state.isra.78 [i915]] WRPLL 2
>[   81.252881] [drm:verify_single_dpll_state.isra.78 [i915]] SPLL
>[   81.252912] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 810
>[   81.252941] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 1350
>[   81.252970] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 2700
>[   81.253010] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A]
>[   81.258553] PM: freeze of devices complete after 64.545 msecs
>[   81.258983] [drm:intel_power_well_disable [i915]] disabling display
>[   81.259017] [drm:intel_display_power_put [i915]] Requesting to disable the power well
>[   81.259048] [drm:intel_power_well_disable [i915]] disabling always-on
>[   81.259092] [drm:hsw_enable_pc8 [i915]] Enabling package C8+
>[   81.259191] [drm:sandybridge_pcode_write [i915]] warning: pcode (write) mailbox access failed: -6
>[   81.259234] [drm:hsw_write_dcomp [i915]] Failed to write to D_COMP
>[   81.276038] PM: late freeze of devices complete after 17.479 msecs
>[   81.276856] PM: noirq freeze of devices complete after 0.812 msecs
>[   81.277251] ACPI: Preparing to enter system sleep state S4
>[   81.278365] PM: Saving platform NVS memory
>[   81.284878] Disabling non-boot CPUs ...
>[   81.300387] IRQ 9: no longer affine to CPU1
>[   81.300395] IRQ 17: no longer affine to CPU1
>[   81.300422] IRQ 29: no longer affine to CPU1
>[   81.300425] IRQ 31: no longer affine to CPU1
>[   81.301463] smpboot: CPU 1 is now offline
>[   81.301848] PM: Creating hibernation image:
>[   81.390572] PM: Need to copy 162123 pages
>[   81.390575] PM: Normal pages needed: 162123 + 1024, available pages: 329365
>[   81.302822] PM: Restoring platform NVS memory
>[   81.304579] Suspended for 132.000 seconds
>[   81.304635] Enabling non-boot CPUs ...
>[   81.304713] x86: Booting SMP configuration:
>[   81.304715] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[   81.305435]  cache: parent cpu1 should not be sleeping
>[   81.305694] CPU1 is up
>[   81.309209] ACPI: Waking up from system sleep state S4
>[   81.330804] PM: noirq restore of devices complete after 20.745 msecs
>[   81.330921] [drm:hsw_disable_pc8 [i915]] Disabling package C8+
>[   81.331175] [drm:intel_power_well_enable [i915]] enabling always-on
>[   81.331207] [drm:intel_power_well_enable [i915]] enabling display
>[   81.331305] PM: early restore of devices complete after 0.477 msecs
>[   81.359545] usb usb3: root hub lost power or was reset
>[   81.359546] usb usb4: root hub lost power or was reset
>[   81.360417] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x77b04018
>[   81.360449] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[   81.360464] [drm:intel_opregion_setup [i915]] SWSCI supported
>[   81.360496] usb usb1: root hub lost power or was reset
>[   81.360911] usb usb2: root hub lost power or was reset
>[   81.364374] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[   81.364801] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[   81.367973] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[   81.367987] [drm:intel_opregion_setup [i915]] ASLE supported
>[   81.368001] [drm:intel_opregion_setup [i915]] ASLE extension supported
>[   81.368016] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[   81.368270] [drm:intel_crt_reset [i915]] crt adpa set to 0x80f40000
>[   81.368313] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 0
>[   81.368377] [drm:intel_update_cdclk [i915]] Current CD clock rate: 540000 kHz, VCO: 0 kHz, ref: 0 kHz
>[   81.368418] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1
>[   81.368433] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:32:pipe A] hw state readout: enabled
>[   81.368449] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
>[   81.368463] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe B] hw state readout: disabled
>[   81.368478] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[   81.368492] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[   81.368506] [drm:intel_modeset_setup_hw_state [i915]] SPLL hw state readout: crtc_mask 0x00000001, on 1
>[   81.368521] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1
>[   81.368534] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1
>[   81.368548] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1
>[   81.368582] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:41:CRT] hw state readout: enabled, pipe A
>[   81.368597] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:42:DDI C] hw state readout: disabled, pipe A
>[   81.368611] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:40:VGA-1] hw state readout: enabled
>[   81.368626] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:43:HDMI-A-1] hw state readout: disabled
>[   81.368650] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][setup_hw_state]
>[   81.368665] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[   81.368680] [drm:intel_dump_m_n_config.isra.52 [i915]] fdi: lanes: 1; gmch_m: 6058439, gmch_n: 8388608, link_m: 126217, link_n: 524288, tu: 64
>[   81.368694] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   81.368708] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   81.368717] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 60 65011 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   81.368732] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   81.368738] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 60 65011 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[   81.368761] [drm:intel_dump_pipe_config [i915]] crtc timings: 65011 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa
>[   81.368776] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1024x768, pixel rate 65011
>[   81.368790] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x04000300, enabled
>[   81.368805] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   81.368819] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[   81.368833] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   81.368847] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] disabled, scaler_id = 0
>[   81.368862] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[   81.368876] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0
>[   81.368891] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe B][setup_hw_state]
>[   81.368905] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[   81.368919] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   81.368933] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   81.368939] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   81.368953] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   81.368959] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   81.368974] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[   81.368988] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[   81.369003] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   81.369017] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   81.369031] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[   81.369045] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   81.369059] [drm:intel_dump_pipe_config [i915]] [PLANE:33:primary B] disabled, scaler_id = 0
>[   81.369073] [drm:intel_dump_pipe_config [i915]] [PLANE:35:sprite B] disabled, scaler_id = 0
>[   81.369087] [drm:intel_dump_pipe_config [i915]] [PLANE:37:cursor B] disabled, scaler_id = 0
>[   81.369103] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 enabled but not in use, disabling
>[   81.369117] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 enabled but not in use, disabling
>[   81.369132] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 enabled but not in use, disabling
>[   81.369158] [drm:intel_atomic_check [i915]] [CONNECTOR:40:VGA-1] checking for sink bpp constrains
>[   81.369172] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24
>[   81.369186] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 2
>[   81.369201] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[   81.369215] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset]
>[   81.369230] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[   81.369244] [drm:intel_dump_m_n_config.isra.52 [i915]] fdi: lanes: 2; gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
>[   81.369259] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[   81.369272] [drm:intel_dump_pipe_config [i915]] requested mode:
>[   81.369279] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[   81.369293] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[   81.369300] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[   81.369315] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x0 flags: 0x5
>[   81.369329] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000
>[   81.369343] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[   81.369357] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[   81.369371] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[   81.369385] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[   81.369399] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] disabled, scaler_id = 0
>[   81.369413] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[   81.369427] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0
>[   81.369447] [drm:intel_find_shared_dpll [i915]] [CRTC:32:pipe A] allocated SPLL
>[   81.369462] [drm:intel_reference_shared_dpll [i915]] using SPLL for pipe A
>[   81.369618] [drm:intel_disable_pipe [i915]] disabling pipe A
>[   81.400603] [drm:intel_disable_shared_dpll [i915]] disable SPLL (active 1, on? 1) for crtc 32
>[   81.400619] [drm:intel_disable_shared_dpll [i915]] disabling SPLL
>[   81.400637] [drm:intel_atomic_commit_tail [i915]] [ENCODER:41:CRT]
>[   81.400652] [drm:intel_atomic_commit_tail [i915]] [ENCODER:42:DDI C]
>[   81.400668] [drm:verify_connector_state.isra.77 [i915]] [CONNECTOR:43:HDMI-A-1]
>[   81.400683] [drm:verify_single_dpll_state.isra.78 [i915]] WRPLL 1
>[   81.400698] [drm:verify_single_dpll_state.isra.78 [i915]] WRPLL 2
>[   81.400713] [drm:verify_single_dpll_state.isra.78 [i915]] SPLL
>[   81.400728] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 810
>[   81.400742] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 1350
>[   81.400756] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 2700
>[   81.400774] [drm:intel_enable_shared_dpll [i915]] enable SPLL (active 1, on? 0) for crtc 32
>[   81.400789] [drm:intel_enable_shared_dpll [i915]] enabling SPLL
>[   81.401685] [drm:hsw_fdi_link_train [i915]] FDI link training done on step 0
>[   81.401736] [drm:intel_enable_pipe [i915]] enabling pipe A
>[   81.401764] [drm:haswell_crtc_enable [i915]] iCLKIP clock: found settings for 108000KHz refresh rate: auxdiv=0, divsel=17, phasedir=0, phaseinc=0
>[   81.451848] [drm:verify_connector_state.isra.77 [i915]] [CONNECTOR:40:VGA-1]
>[   81.451866] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A]
>[   81.451905] [drm:verify_single_dpll_state.isra.78 [i915]] SPLL
>[   81.451921] [drm:intel_atomic_commit_tail [i915]] [CRTC:39:pipe B]
>[   81.451947] [drm:intel_opregion_register [i915]] 2 outputs detected
>[   81.451965] [drm:intel_crt_detect [i915]] [CONNECTOR:40:VGA-1] force=0
>[   81.451981] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x83f40018
>[   81.462103] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x83f40018, result 1
>[   81.462118] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[   81.462123] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:40:VGA-1] status updated from connected to connected
>[   81.462139] [drm:intel_hdmi_detect [i915]] [CONNECTOR:43:HDMI-A-1]
>[   81.464187] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   81.464202] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   81.466248] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   81.466256] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[   81.468303] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   81.468318] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   81.470362] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   81.470367] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[   81.470370] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1] status updated from disconnected to disconnected
>[   81.698839] usb 1-1: reset high-speed USB device number 2 using ehci-pci
>[   81.698857] usb 2-1: reset high-speed USB device number 2 using ehci-pci
>[   81.710858] usb 3-9: reset high-speed USB device number 2 using xhci_hcd
>[   82.118865] usb 3-10: reset low-speed USB device number 3 using xhci_hcd
>[   82.414514] PM: restore of devices complete after 1055.219 msecs
>[   82.414994] PM: Image restored successfully.
>[   82.415014] PM: Basic memory bitmaps freed
>[   82.415044] OOM killer enabled.
>[   82.415046] Restarting tasks ... done.
>[   82.423108] video LNXVIDEO:00: Restoring backlight state
>[   82.818856] [drm:intel_enable_gt_powersave [i915]] Enabling RC6 states: RC6 on
>[   82.818882] [drm:sandybridge_pcode_read [i915]] warning: pcode (read) mailbox access failed: -6
>[  328.793303] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[  328.936047] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[  331.963015] wlan0: authenticate with f8:d1:11:ce:7d:59
>[  331.981935] wlan0: send auth to f8:d1:11:ce:7d:59 (try 1/3)
>[  331.983617] wlan0: authenticated
>[  331.986838] wlan0: associate with f8:d1:11:ce:7d:59 (try 1/3)
>[  331.990065] wlan0: RX AssocResp from f8:d1:11:ce:7d:59 (capab=0x411 status=0 aid=2)
>[  331.990184] wlan0: associated
>[  331.990217] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[  351.446826] [drm:intel_atomic_check [i915]] [CONNECTOR:40:VGA-1] checking for sink bpp constrains
>[  351.446879] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24
>[  351.446932] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 2
>[  351.446980] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[  351.447034] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset]
>[  351.447089] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[  351.447141] [drm:intel_dump_m_n_config.isra.52 [i915]] fdi: lanes: 2; gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
>[  351.447190] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  351.447239] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  351.447264] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  351.447313] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  351.447335] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  351.447388] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x0 flags: 0x5
>[  351.447437] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000
>[  351.447486] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  351.447534] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  351.447583] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[  351.447664] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  351.447724] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] FB:48, fb = 1280x1024 format = XR24 little-endian (0x34325258)
>[  351.447778] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[  351.447834] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] FB:63, fb = 256x256 format = AR24 little-endian (0x34325241)
>[  351.447907] [drm:intel_find_shared_dpll [i915]] [CRTC:32:pipe A] allocated SPLL
>[  351.447963] [drm:intel_reference_shared_dpll [i915]] using SPLL for pipe A
>[  351.448060] [drm:intel_disable_pipe [i915]] disabling pipe A
>[  351.482000] [drm:intel_disable_shared_dpll [i915]] disable SPLL (active 1, on? 1) for crtc 32
>[  351.482055] [drm:intel_disable_shared_dpll [i915]] disabling SPLL
>[  351.482114] [drm:intel_atomic_commit_tail [i915]] [ENCODER:41:CRT]
>[  351.482164] [drm:intel_atomic_commit_tail [i915]] [ENCODER:42:DDI C]
>[  351.482216] [drm:verify_single_dpll_state.isra.78 [i915]] WRPLL 1
>[  351.482268] [drm:verify_single_dpll_state.isra.78 [i915]] WRPLL 2
>[  351.482318] [drm:verify_single_dpll_state.isra.78 [i915]] SPLL
>[  351.482368] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 810
>[  351.482416] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 1350
>[  351.482464] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 2700
>[  351.482514] [drm:intel_power_well_disable [i915]] disabling display
>[  351.482555] [drm:intel_display_power_put [i915]] Requesting to disable the power well
>[  351.482606] [drm:verify_connector_state.isra.77 [i915]] [CONNECTOR:40:VGA-1]
>[  351.482659] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A]
>[  351.482711] [drm:verify_single_dpll_state.isra.78 [i915]] SPLL
>[  351.482753] [drm:intel_power_well_disable [i915]] disabling always-on
>[  359.592200] PM: Hibernation mode set to 'platform'
>[  359.593324] PM: Syncing filesystems ... 
>[  359.619059] PM: done.
>[  359.619061] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[  359.620540] OOM killer disabled.
>[  359.620596] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[  359.620597] PM: Marking nosave pages: [mem 0x00058000-0x00058fff]
>[  359.620599] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
>[  359.620602] PM: Marking nosave pages: [mem 0x602fe000-0x60304fff]
>[  359.620603] PM: Marking nosave pages: [mem 0x60750000-0x60b67fff]
>[  359.620630] PM: Marking nosave pages: [mem 0x776b2000-0x78ffefff]
>[  359.620788] PM: Marking nosave pages: [mem 0x79000000-0xffffffff]
>[  359.624123] PM: Basic memory bitmaps created
>[  359.624416] PM: Preallocating image memory... done (allocated 164977 pages)
>[  359.695019] PM: Allocated 659908 kbytes in 0.06 seconds (10998.46 MB/s)
>[  359.695020] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[  359.696303] Suspending console(s) (use no_console_suspend to debug)
>[  359.696357] wlan0: deauthenticating from f8:d1:11:ce:7d:59 by local choice (Reason: 3=DEAUTH_LEAVING)
>[  359.697240] [drm:intel_power_well_enable [i915]] enabling always-on
>[  359.697252] [drm:intel_power_well_enable [i915]] enabling display
>[  359.697265] [drm:hsw_set_power_well.constprop.14 [i915]] Enabling power well
>[  359.730134] [drm:intel_atomic_commit_tail [i915]] [ENCODER:41:CRT]
>[  359.730155] [drm:intel_atomic_commit_tail [i915]] [ENCODER:42:DDI C]
>[  359.730175] [drm:verify_connector_state.isra.77 [i915]] [CONNECTOR:40:VGA-1]
>[  359.730195] [drm:verify_single_dpll_state.isra.78 [i915]] WRPLL 1
>[  359.730214] [drm:verify_single_dpll_state.isra.78 [i915]] WRPLL 2
>[  359.730233] [drm:verify_single_dpll_state.isra.78 [i915]] SPLL
>[  359.730252] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 810
>[  359.730270] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 1350
>[  359.730288] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 2700
>[  359.730308] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A]
>[  359.734549] PM: freeze of devices complete after 37.120 msecs
>[  359.734769] [drm:intel_power_well_disable [i915]] disabling display
>[  359.734786] [drm:intel_display_power_put [i915]] Requesting to disable the power well
>[  359.734801] [drm:intel_power_well_disable [i915]] disabling always-on
>[  359.734822] [drm:hsw_enable_pc8 [i915]] Enabling package C8+
>[  359.734900] [drm:sandybridge_pcode_write [i915]] warning: pcode (write) mailbox access failed: -6
>[  359.734921] [drm:hsw_write_dcomp [i915]] Failed to write to D_COMP
>[  359.754732] PM: late freeze of devices complete after 19.586 msecs
>[  359.755233] PM: noirq freeze of devices complete after 0.485 msecs
>[  359.755380] ACPI: Preparing to enter system sleep state S4
>[  359.755922] PM: Saving platform NVS memory
>[  359.758575] Disabling non-boot CPUs ...
>[  359.771362] IRQ 9: no longer affine to CPU1
>[  359.771366] IRQ 17: no longer affine to CPU1
>[  359.771370] IRQ 29: no longer affine to CPU1
>[  359.771371] IRQ 31: no longer affine to CPU1
>[  359.772393] smpboot: CPU 1 is now offline
>[  359.772663] PM: Creating hibernation image:
>[  359.798851] PM: Need to copy 164747 pages
>[  359.798852] PM: Normal pages needed: 164747 + 1024, available pages: 326748
>[  359.773636] PM: Restoring platform NVS memory
>[  359.775312] Suspended for 98.732 seconds
>[  359.775402] Enabling non-boot CPUs ...
>[  359.775507] x86: Booting SMP configuration:
>[  359.775509] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[  359.776566]  cache: parent cpu1 should not be sleeping
>[  359.776923] CPU1 is up
>[  359.782086] ACPI: Waking up from system sleep state S4
>[  359.802789] PM: noirq restore of devices complete after 18.866 msecs
>[  359.802884] [drm:hsw_disable_pc8 [i915]] Disabling package C8+
>[  359.803116] [drm:intel_power_well_enable [i915]] enabling always-on
>[  359.803139] [drm:intel_power_well_enable [i915]] enabling display
>[  359.803165] PM: early restore of devices complete after 0.345 msecs
>[  359.828744] usb usb3: root hub lost power or was reset
>[  359.828746] usb usb4: root hub lost power or was reset
>[  359.829627] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x77b04018
>[  359.829657] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[  359.829671] [drm:intel_opregion_setup [i915]] SWSCI supported
>[  359.829933] usb usb1: root hub lost power or was reset
>[  359.831695] usb usb2: root hub lost power or was reset
>[  359.833827] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[  359.835596] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[  359.846978] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[  359.846993] [drm:intel_opregion_setup [i915]] ASLE supported
>[  359.847007] [drm:intel_opregion_setup [i915]] ASLE extension supported
>[  359.847022] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[  359.847576] [drm:intel_crt_reset [i915]] crt adpa set to 0x80f40000
>[  359.847618] [drm:init_workarounds_ring [i915]] rcs0: Number of context specific w/a: 0
>[  359.847673] [drm:intel_update_cdclk [i915]] Current CD clock rate: 540000 kHz, VCO: 0 kHz, ref: 0 kHz
>[  359.847713] [drm:intel_modeset_setup_hw_state [i915]] pipe A active planes 0x1
>[  359.847728] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:32:pipe A] hw state readout: enabled
>[  359.847744] [drm:intel_modeset_setup_hw_state [i915]] pipe B active planes 0x0
>[  359.847758] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:39:pipe B] hw state readout: disabled
>[  359.847773] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[  359.847787] [drm:intel_modeset_setup_hw_state [i915]] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[  359.847802] [drm:intel_modeset_setup_hw_state [i915]] SPLL hw state readout: crtc_mask 0x00000001, on 1
>[  359.847816] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 hw state readout: crtc_mask 0x00000000, on 1
>[  359.847830] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 hw state readout: crtc_mask 0x00000000, on 1
>[  359.847844] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 hw state readout: crtc_mask 0x00000000, on 1
>[  359.847876] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:41:CRT] hw state readout: enabled, pipe A
>[  359.847891] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:42:DDI C] hw state readout: disabled, pipe A
>[  359.847905] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:40:VGA-1] hw state readout: enabled
>[  359.847920] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:43:HDMI-A-1] hw state readout: disabled
>[  359.847944] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][setup_hw_state]
>[  359.847959] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[  359.847974] [drm:intel_dump_m_n_config.isra.52 [i915]] fdi: lanes: 1; gmch_m: 6058439, gmch_n: 8388608, link_m: 126217, link_n: 524288, tu: 64
>[  359.847988] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  359.848003] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  359.848011] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 60 65011 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  359.848026] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  359.848032] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1024x768" 60 65011 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  359.848049] [drm:intel_dump_pipe_config [i915]] crtc timings: 65011 1024 1048 1184 1344 768 771 777 806, type: 0x40 flags: 0xa
>[  359.848063] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1024x768, pixel rate 65011
>[  359.848086] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x04000300, enabled
>[  359.848100] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  359.848114] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[  359.848129] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  359.848143] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] disabled, scaler_id = 0
>[  359.848157] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[  359.848171] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0
>[  359.848186] [drm:intel_dump_pipe_config [i915]] [CRTC:39:pipe B][setup_hw_state]
>[  359.848200] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[  359.848214] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  359.848228] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  359.848235] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  359.848249] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  359.848255] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  359.848270] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  359.848284] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[  359.848299] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  359.848313] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  359.848327] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x0
>[  359.848341] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  359.848355] [drm:intel_dump_pipe_config [i915]] [PLANE:33:primary B] disabled, scaler_id = 0
>[  359.848369] [drm:intel_dump_pipe_config [i915]] [PLANE:35:sprite B] disabled, scaler_id = 0
>[  359.848383] [drm:intel_dump_pipe_config [i915]] [PLANE:37:cursor B] disabled, scaler_id = 0
>[  359.848398] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 810 enabled but not in use, disabling
>[  359.848413] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 1350 enabled but not in use, disabling
>[  359.848427] [drm:intel_modeset_setup_hw_state [i915]] LCPLL 2700 enabled but not in use, disabling
>[  359.848452] [drm:intel_atomic_check [i915]] [CONNECTOR:40:VGA-1] checking for sink bpp constrains
>[  359.848467] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24
>[  359.848481] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 2
>[  359.848496] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[  359.848510] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset]
>[  359.848525] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[  359.848540] [drm:intel_dump_m_n_config.isra.52 [i915]] fdi: lanes: 2; gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
>[  359.848554] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  359.848568] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  359.848575] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  359.848589] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  359.848596] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  359.848611] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x0 flags: 0x5
>[  359.848625] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000
>[  359.848640] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  359.848654] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  359.848668] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[  359.848682] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  359.848696] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] disabled, scaler_id = 0
>[  359.848710] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[  359.848724] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] disabled, scaler_id = 0
>[  359.848744] [drm:intel_find_shared_dpll [i915]] [CRTC:32:pipe A] allocated SPLL
>[  359.848759] [drm:intel_reference_shared_dpll [i915]] using SPLL for pipe A
>[  359.848929] [drm:intel_disable_pipe [i915]] disabling pipe A
>[  359.872690] [drm:intel_disable_shared_dpll [i915]] disable SPLL (active 1, on? 1) for crtc 32
>[  359.872705] [drm:intel_disable_shared_dpll [i915]] disabling SPLL
>[  359.872724] [drm:intel_atomic_commit_tail [i915]] [ENCODER:41:CRT]
>[  359.872738] [drm:intel_atomic_commit_tail [i915]] [ENCODER:42:DDI C]
>[  359.872754] [drm:verify_connector_state.isra.77 [i915]] [CONNECTOR:43:HDMI-A-1]
>[  359.872770] [drm:verify_single_dpll_state.isra.78 [i915]] WRPLL 1
>[  359.872785] [drm:verify_single_dpll_state.isra.78 [i915]] WRPLL 2
>[  359.872800] [drm:verify_single_dpll_state.isra.78 [i915]] SPLL
>[  359.872823] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 810
>[  359.872837] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 1350
>[  359.872852] [drm:verify_single_dpll_state.isra.78 [i915]] LCPLL 2700
>[  359.872866] [drm:intel_power_well_disable [i915]] disabling display
>[  359.872878] [drm:intel_display_power_put [i915]] Requesting to disable the power well
>[  359.872893] [drm:verify_connector_state.isra.77 [i915]] [CONNECTOR:40:VGA-1]
>[  359.872909] [drm:intel_atomic_commit_tail [i915]] [CRTC:32:pipe A]
>[  359.872925] [drm:verify_single_dpll_state.isra.78 [i915]] SPLL
>[  359.872940] [drm:intel_atomic_commit_tail [i915]] [CRTC:39:pipe B]
>[  359.872952] [drm:intel_power_well_disable [i915]] disabling always-on
>[  359.872977] [drm:intel_opregion_register [i915]] 2 outputs detected
>[  359.872994] [drm:intel_crt_detect [i915]] [CONNECTOR:40:VGA-1] force=0
>[  359.873006] [drm:intel_power_well_enable [i915]] enabling always-on
>[  359.873018] [drm:intel_power_well_enable [i915]] enabling display
>[  359.873029] [drm:hsw_set_power_well.constprop.14 [i915]] Enabling power well
>[  359.873047] [drm:intel_crt_detect [i915]] trigger hotplug detect cycle: adpa=0x3f40000
>[  359.883286] [drm:intel_crt_detect [i915]] ironlake hotplug adpa=0x3f40000, result 1
>[  359.883310] [drm:intel_crt_detect [i915]] CRT detected via hotplug
>[  359.883329] [drm:intel_power_well_disable [i915]] disabling display
>[  359.883348] [drm:intel_display_power_put [i915]] Requesting to disable the power well
>[  359.883366] [drm:intel_power_well_disable [i915]] disabling always-on
>[  359.883373] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:40:VGA-1] status updated from connected to connected
>[  359.883398] [drm:intel_hdmi_detect [i915]] [CONNECTOR:43:HDMI-A-1]
>[  359.883416] [drm:intel_power_well_enable [i915]] enabling always-on
>[  359.885502] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[  359.885527] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[  359.887609] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[  359.887621] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[  359.889707] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[  359.889731] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[  359.891815] [drm:gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[  359.891823] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[  359.891841] [drm:intel_power_well_disable [i915]] disabling always-on
>[  359.891847] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:43:HDMI-A-1] status updated from disconnected to disconnected
>[  360.177779] usb 1-1: reset high-speed USB device number 2 using ehci-pci
>[  360.177784] usb 2-1: reset high-speed USB device number 2 using ehci-pci
>[  360.190210] usb 3-9: reset high-speed USB device number 2 using xhci_hcd
>[  360.609555] usb 3-10: reset low-speed USB device number 3 using xhci_hcd
>[  360.912577] PM: restore of devices complete after 1054.303 msecs
>[  360.913084] PM: Image restored successfully.
>[  360.913106] PM: Basic memory bitmaps freed
>[  360.913112] OOM killer enabled.
>[  360.913113] Restarting tasks ... done.
>[  360.916816] video LNXVIDEO:00: Restoring backlight state
>[  360.922657] [drm:ilk_validate_wm_level.part.20 [i915]] Sprite WM0 too large 56 (max 0)
>[  360.922669] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
>[  360.922685] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible
>[  360.922734] [drm:intel_atomic_check [i915]] [CONNECTOR:40:VGA-1] checking for sink bpp constrains
>[  360.922749] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24
>[  360.922765] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 2
>[  360.922779] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[  360.922795] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset]
>[  360.922810] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[  360.922826] [drm:intel_dump_m_n_config.isra.52 [i915]] fdi: lanes: 2; gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
>[  360.922840] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  360.922855] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  360.922864] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  360.922879] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  360.922885] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  360.922901] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x0 flags: 0x5
>[  360.922916] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000
>[  360.922930] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  360.922945] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  360.922960] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[  360.922974] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  360.922990] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] FB:48, fb = 1280x1024 format = XR24 little-endian (0x34325258)
>[  360.923005] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[  360.923020] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] FB:63, fb = 256x256 format = AR24 little-endian (0x34325241)
>[  360.923040] [drm:intel_find_shared_dpll [i915]] [CRTC:32:pipe A] allocated SPLL
>[  360.923055] [drm:intel_reference_shared_dpll [i915]] using SPLL for pipe A
>[  360.923068] [drm:ilk_validate_wm_level.part.20 [i915]] Sprite WM0 too large 56 (max 0)
>[  360.923078] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
>[  360.923094] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible
>[  360.923131] [drm:intel_atomic_check [i915]] [CONNECTOR:40:VGA-1] checking for sink bpp constrains
>[  360.923146] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24
>[  360.923161] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 2
>[  360.923175] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[  360.923190] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset]
>[  360.923204] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[  360.923219] [drm:intel_dump_m_n_config.isra.52 [i915]] fdi: lanes: 2; gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
>[  360.923234] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  360.923248] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  360.923255] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  360.923270] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  360.923276] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  360.923291] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x0 flags: 0x5
>[  360.923306] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000
>[  360.923321] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  360.923335] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  360.923349] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[  360.923363] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  360.923379] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] FB:48, fb = 1280x1024 format = XR24 little-endian (0x34325258)
>[  360.923394] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[  360.923409] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] FB:63, fb = 256x256 format = AR24 little-endian (0x34325241)
>[  360.923427] [drm:intel_find_shared_dpll [i915]] [CRTC:32:pipe A] allocated SPLL
>[  360.923441] [drm:intel_reference_shared_dpll [i915]] using SPLL for pipe A
>[  360.923453] [drm:ilk_validate_wm_level.part.20 [i915]] Sprite WM0 too large 56 (max 0)
>[  360.923464] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
>[  360.923480] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible
>[  361.073559] [drm:intel_enable_gt_powersave [i915]] Enabling RC6 states: RC6 on
>[  361.073595] [drm:sandybridge_pcode_read [i915]] warning: pcode (read) mailbox access failed: -6
>[  361.881131] wlan0: authenticate with f8:d1:11:ce:7d:59
>[  361.900571] wlan0: send auth to f8:d1:11:ce:7d:59 (try 1/3)
>[  361.902282] wlan0: authenticated
>[  361.905242] wlan0: associate with f8:d1:11:ce:7d:59 (try 1/3)
>[  361.908475] wlan0: RX AssocResp from f8:d1:11:ce:7d:59 (capab=0x411 status=0 aid=2)
>[  361.908573] wlan0: associated
>[  453.785924] [drm:ilk_validate_wm_level.part.20 [i915]] Sprite WM0 too large 56 (max 0)
>[  453.785962] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
>[  453.786017] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible
>[  453.897257] [drm:intel_atomic_check [i915]] [CONNECTOR:40:VGA-1] checking for sink bpp constrains
>[  453.897311] [drm:intel_atomic_check [i915]] clamping display bpp (was 36) to default limit of 24
>[  453.897364] [drm:intel_atomic_check [i915]] checking fdi config on pipe A, lanes 2
>[  453.897413] [drm:intel_atomic_check [i915]] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[  453.897466] [drm:intel_dump_pipe_config [i915]] [CRTC:32:pipe A][modeset]
>[  453.897516] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
>[  453.897568] [drm:intel_dump_m_n_config.isra.52 [i915]] fdi: lanes: 2; gmch_m: 5033164, gmch_n: 8388608, link_m: 209715, link_n: 524288, tu: 64
>[  453.897616] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  453.897665] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  453.897690] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[  453.897739] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  453.897761] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  453.897814] [drm:intel_dump_pipe_config [i915]] crtc timings: 108000 1280 1328 1440 1688 1024 1025 1028 1066, type: 0x0 flags: 0x5
>[  453.897864] [drm:intel_dump_pipe_config [i915]] port clock: 270000, pipe src size: 1280x1024, pixel rate 108000
>[  453.897913] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  453.897961] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  453.898011] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: wrpll: 0x0 spll: 0x94000000
>[  453.898058] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  453.898110] [drm:intel_dump_pipe_config [i915]] [PLANE:26:primary A] FB:48, fb = 1280x1024 format = XR24 little-endian (0x34325258)
>[  453.898158] [drm:intel_dump_pipe_config [i915]] [PLANE:28:sprite A] disabled, scaler_id = 0
>[  453.898208] [drm:intel_dump_pipe_config [i915]] [PLANE:30:cursor A] FB:63, fb = 256x256 format = AR24 little-endian (0x34325241)
>[  453.898271] [drm:intel_find_shared_dpll [i915]] [CRTC:32:pipe A] allocated SPLL
>[  453.898320] [drm:intel_reference_shared_dpll [i915]] using SPLL for pipe A
>[  453.898362] [drm:ilk_validate_wm_level.part.20 [i915]] Sprite WM0 too large 56 (max 0)
>[  453.898397] [drm:ilk_validate_pipe_wm [i915]] LP0 watermark invalid
>[  453.898449] [drm:intel_crtc_atomic_check [i915]] No valid intermediate pipe watermarks are possible

Actions: View

Attachments on bug 101865: 132825 | 133602 | 133626 | 133627 | 133644 | 135095 | 135136

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.