Attachment 138445 Details for Bug 105811 – dmesg from boot into runlevel 3 after ntfs filesystems removed

dmesg from boot into runlevel 3 after ntfs filesystems removed

dmesg-booted.txt (text/plain), 94.05 KB, created by Alec Habig on 2018-03-30 14:24:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alec Habig

Created: 2018-03-30 14:24:57 UTC

Size: 94.05 KB

patch

obsolete

>[    0.000000] Linux version 4.16.0-rc7+ (root@entropy) (gcc version 7.3.1 20180303 (Red Hat 7.3.1-5) (GCC)) #1 SMP Fri Mar 30 08:48:49 CDT 2018
>[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.16.0-rc7+ root=/dev/mapper/fedora_entropy-root ro vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora_entropy/root LANG=en_US.UTF-8 nouveau.modeset=0 rd.driver.blacklist=nouveau crashkernel=128M drm.debug=14
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000aede0fff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000aede1000-0x00000000bae9efff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000bae9f000-0x00000000baf9efff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000bf9fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023e5fffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] random: fast init done
>[    0.000000] SMBIOS 2.7 present.
>[    0.000000] DMI: LENOVO 2344BPU/2344BPU, BIOS G1ETB5WW (2.75 ) 03/05/2018
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x23e600 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0FFC00000 mask FFFC00000 write-protect
>[    0.000000]   1 base 000000000 mask F80000000 write-back
>[    0.000000]   2 base 080000000 mask FC0000000 write-back
>[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
>[    0.000000]   4 base 0BB000000 mask FFF000000 uncachable
>[    0.000000]   5 base 100000000 mask F00000000 write-back
>[    0.000000]   6 base 200000000 mask FC0000000 write-back
>[    0.000000]   7 base 23F000000 mask FFF000000 uncachable
>[    0.000000]   8 base 23E800000 mask FFF800000 uncachable
>[    0.000000]   9 base 23E600000 mask FFFE00000 uncachable
>[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.000000] e820: last_pfn = 0xaede1 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [        (ptrval)]
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
>[    0.000000] BRK [0x1f2d01000, 0x1f2d01fff] PGTABLE
>[    0.000000] BRK [0x1f2d02000, 0x1f2d02fff] PGTABLE
>[    0.000000] BRK [0x1f2d03000, 0x1f2d03fff] PGTABLE
>[    0.000000] BRK [0x1f2d04000, 0x1f2d04fff] PGTABLE
>[    0.000000] BRK [0x1f2d05000, 0x1f2d05fff] PGTABLE
>[    0.000000] BRK [0x1f2d06000, 0x1f2d06fff] PGTABLE
>[    0.000000] BRK [0x1f2d07000, 0x1f2d07fff] PGTABLE
>[    0.000000] BRK [0x1f2d08000, 0x1f2d08fff] PGTABLE
>[    0.000000] BRK [0x1f2d09000, 0x1f2d09fff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x35906000-0x36c7afff]
>[    0.000000] ACPI: Early table checksum verification disabled
>[    0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
>[    0.000000] ACPI: XSDT 0x00000000BAFFE170 0000C4 (v01 LENOVO TP-G1    00002750 PTL  00000002)
>[    0.000000] ACPI: FACP 0x00000000BAFE6000 00010C (v05 LENOVO TP-G1    00002750 PTL  00000002)
>[    0.000000] ACPI: DSDT 0x00000000BAFE8000 0103F7 (v01 LENOVO TP-G1    00002750 INTL 20061109)
>[    0.000000] ACPI: FACS 0x00000000BAF5A000 000040
>[    0.000000] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 LENOVO TP-G1    00002750 PTL  00000001)
>[    0.000000] ACPI: TCPA 0x00000000BAFFC000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)
>[    0.000000] ACPI: SSDT 0x00000000BAFFB000 000408 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
>[    0.000000] ACPI: SSDT 0x00000000BAFFA000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
>[    0.000000] ACPI: SSDT 0x00000000BAFF9000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
>[    0.000000] ACPI: HPET 0x00000000BAFE4000 000038 (v01 LENOVO TP-G1    00002750 PTL  00000002)
>[    0.000000] ACPI: APIC 0x00000000BAFE3000 000098 (v01 LENOVO TP-G1    00002750 PTL  00000002)
>[    0.000000] ACPI: MCFG 0x00000000BAFE2000 00003C (v01 LENOVO TP-G1    00002750 PTL  00000002)
>[    0.000000] ACPI: ECDT 0x00000000BAFE1000 000052 (v01 LENOVO TP-G1    00002750 PTL  00000002)
>[    0.000000] ACPI: FPDT 0x00000000BAFE0000 000064 (v01 LENOVO TP-G1    00002750 PTL  00000002)
>[    0.000000] ACPI: ASF! 0x00000000BAFE7000 0000A5 (v32 LENOVO TP-G1    00002750 PTL  00000002)
>[    0.000000] ACPI: UEFI 0x00000000BAFDF000 00003E (v01 LENOVO TP-G1    00002750 PTL  00000002)
>[    0.000000] ACPI: UEFI 0x00000000BAFDE000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
>[    0.000000] ACPI: MSDM 0x00000000BAFDD000 000055 (v03 LENOVO TP-G1    00002750 PTL  00000002)
>[    0.000000] ACPI: SSDT 0x00000000BAFDC000 000C51 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
>[    0.000000] ACPI: SSDT 0x00000000BAFDB000 000A83 (v01 PmRef  CpuPm    00003000 INTL 20061109)
>[    0.000000] ACPI: DMAR 0x00000000BAFDA000 0000B8 (v01 INTEL  SNB      00000001 INTL 00000001)
>[    0.000000] ACPI: UEFI 0x00000000BAFD9000 000292 (v01 LENOVO TP-G1    00002750 PTL  00000002)
>[    0.000000] ACPI: DBG2 0x00000000BAFD8000 0000E9 (v00 LENOVO TP-G1    00002750 PTL  00000002)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023e5fffff]
>[    0.000000] NODE_DATA(0) allocated [mem 0x23e5f8000-0x23e5fbfff]
>[    0.000000] Reserving 128MB of memory at 720MB for crashkernel (System RAM: 7889MB)
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023e5fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
>[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
>[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
>[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000aede0fff]
>[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023e5fffff]
>[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023e5fffff]
>[    0.000000] On node 0 totalpages: 2019708
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 21 pages reserved
>[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 11120 pages used for memmap
>[    0.000000]   DMA32 zone: 711648 pages, LIFO batch:31
>[    0.000000]   Normal zone: 20376 pages used for memmap
>[    0.000000]   Normal zone: 1304064 pages, LIFO batch:31
>[    0.000000] Reserved but unavailable: 100 pages
>[    0.000000] Reserving Intel graphics memory at [mem 0xbba00000-0xbf9fffff]
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
>[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
>[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
>[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xaede1000-0xbae9efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbae9f000-0xbaf9efff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbaf9f000-0xbaffefff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbafff000-0xbf9fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
>[    0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
>[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] percpu: Embedded 43 pages/cpu @        (ptrval) s137944 r8192 d29992 u262144
>[    0.000000] pcpu-alloc: s137944 r8192 d29992 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1988127
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.16.0-rc7+ root=/dev/mapper/fedora_entropy-root ro vconsole.font=latarcyrheb-sun16 rd.lvm.lv=fedora_entropy/root LANG=en_US.UTF-8 nouveau.modeset=0 rd.driver.blacklist=nouveau crashkernel=128M drm.debug=14
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 7707704K/8078832K available (12300K kernel code, 1281K rwdata, 3072K rodata, 1224K init, 660K bss, 371128K reserved, 0K cma-reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Kernel/User page tables isolation: enabled
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU event tracing is enabled.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
>[    0.000000] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] ACPI: Core revision 20180105
>[    0.000000] ACPI: 6 ACPI AML tables successfully acquired and loaded
>[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
>[    0.000000] hpet clockevent registered
>[    0.000000] APIC: Switch to symmetric I/O mode setup
>[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.005000] tsc: Fast TSC calibration using PIT
>[    0.006000] tsc: Detected 2893.239 MHz processor
>[    0.006000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b45022b5f, max_idle_ns: 440795242138 ns
>[    0.006000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.47 BogoMIPS (lpj=2893239)
>[    0.006000] pid_max: default: 32768 minimum: 301
>[    0.006000] Security Framework initialized
>[    0.006000] SELinux:  Initializing.
>[    0.006000] SELinux:  Starting in permissive mode
>[    0.007716] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.008409] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.008507] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.008598] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
>[    0.008829] CPU: Physical Processor ID: 0
>[    0.009001] CPU: Processor Core ID: 0
>[    0.009074] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.009148] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.009223] mce: CPU supports 7 MCE banks
>[    0.009299] CPU0: Thermal monitoring enabled (TM1)
>[    0.009379] process: using mwait in idle threads
>[    0.009450] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
>[    0.009521] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
>[    0.009593] Spectre V2 : Mitigation: Full generic retpoline
>[    0.009661] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
>[    0.010000] Spectre V2 : Enabling Restricted Speculation for firmware calls
>[    0.010168] Freeing SMP alternatives memory: 36K
>[    0.011061] TSC deadline timer enabled
>[    0.011064] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9)
>[    0.011258] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
>[    0.011424] ... version:                3
>[    0.011518] ... bit width:              48
>[    0.011610] ... generic registers:      4
>[    0.011703] ... value mask:             0000ffffffffffff
>[    0.011797] ... max period:             00007fffffffffff
>[    0.011892] ... fixed-purpose events:   3
>[    0.011985] ... event mask:             000000070000000f
>[    0.012030] Hierarchical SRCU implementation.
>[    0.012227] smp: Bringing up secondary CPUs ...
>[    0.012376] x86: Booting SMP configuration:
>[    0.012473] .... node  #0, CPUs:      #1 #2 #3
>[    0.015019] smp: Brought up 1 node, 4 CPUs
>[    0.015195] smpboot: Max logical packages: 2
>[    0.015289] smpboot: Total of 4 processors activated (23145.91 BogoMIPS)
>[    0.016208] devtmpfs: initialized
>[    0.016248] PM: Registering ACPI NVS region [mem 0xbae9f000-0xbaf9efff] (1048576 bytes)
>[    0.016260] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
>[    0.016248] kworker/u16:0 (30) used greatest stack depth: 14688 bytes left
>[    0.016415] futex hash table entries: 2048 (order: 5, 131072 bytes)
>[    0.017168] RTC time:  9:18:34, date: 03/30/18
>[    0.017327] NET: Registered protocol family 16
>[    0.017525] audit: initializing netlink subsys (disabled)
>[    0.017626] audit: type=2000 audit(1522401514.017:1): state=initialized audit_enabled=0 res=1
>[    0.017626] kworker/u16:0 (32) used greatest stack depth: 14240 bytes left
>[    0.017626] cpuidle: using governor menu
>[    0.018077] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.018221] ACPI: bus type PCI registered
>[    0.018492] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
>[    0.018647] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
>[    0.018752] PCI: Using configuration type 1 for base access
>[    0.018916] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
>[    0.022118] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.022127] ACPI: Added _OSI(Module Device)
>[    0.022151] ACPI: Added _OSI(Processor Device)
>[    0.022245] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.022339] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.022436] ACPI: EC: EC started
>[    0.022529] ACPI: EC: interrupt blocked
>[    0.023002] ACPI: \: Used as first EC
>[    0.023002] ACPI: \: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.023002] ACPI: \: Used as boot ECDT EC to handle transactions
>[    0.025287] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.029856] ACPI: Dynamic OEM Table Load:
>[    0.029960] ACPI: SSDT 0xFFFF97BDF4F71000 000A01 (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
>[    0.031281] ACPI: Dynamic OEM Table Load:
>[    0.031382] ACPI: SSDT 0xFFFF97BDF4A28C00 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
>[    0.031716] ACPI: Dynamic OEM Table Load:
>[    0.031816] ACPI: SSDT 0xFFFF97BDF4BF4000 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
>[    0.032504] ACPI: Interpreter enabled
>[    0.032615] ACPI: (supports S0 S3 S4 S5)
>[    0.032711] ACPI: Using IOAPIC for interrupt routing
>[    0.032825] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.033174] ACPI: Enabled 6 GPEs in block 00 to 3F
>[    0.036051] ACPI: Power Resource [PUBS] (on)
>[    0.036445] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
>[    0.037246] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2)
>[    0.039416] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>[    0.039583] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
>[    0.039745] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>[    0.039904] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
>[    0.040063] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>[    0.040226] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11)
>[    0.040389] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
>[    0.040552] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
>[    0.040715] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
>[    0.040818] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
>[    0.041046] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
>[    0.041182] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
>[    0.041328] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
>[    0.041470] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
>[    0.041612] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
>[    0.041748] PCI host bridge to bus 0000:00
>[    0.041845] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.041943] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.042002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.042143] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff window]
>[    0.042282] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
>[    0.042424] pci_bus 0000:00: root bus resource [bus 00-3f]
>[    0.042528] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
>[    0.042594] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
>[    0.042624] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.042676] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
>[    0.042687] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
>[    0.042692] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.042696] pci 0000:00:02.0: reg 0x20: [io  0x7000-0x703f]
>[    0.042773] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
>[    0.042796] pci 0000:00:14.0: reg 0x10: [mem 0xf3920000-0xf392ffff 64bit]
>[    0.042863] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.042916] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
>[    0.042941] pci 0000:00:16.0: reg 0x10: [mem 0xf3935000-0xf393500f 64bit]
>[    0.043013] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.043070] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
>[    0.043089] pci 0000:00:19.0: reg 0x10: [mem 0xf3900000-0xf391ffff]
>[    0.043096] pci 0000:00:19.0: reg 0x14: [mem 0xf393b000-0xf393bfff]
>[    0.043104] pci 0000:00:19.0: reg 0x18: [io  0x7080-0x709f]
>[    0.043161] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>[    0.043212] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
>[    0.043233] pci 0000:00:1a.0: reg 0x10: [mem 0xf393a000-0xf393a3ff]
>[    0.043313] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.043366] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
>[    0.043386] pci 0000:00:1b.0: reg 0x10: [mem 0xf3930000-0xf3933fff 64bit]
>[    0.043456] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.043517] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
>[    0.043657] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.043725] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
>[    0.043864] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.043932] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
>[    0.044070] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.044140] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
>[    0.044161] pci 0000:00:1d.0: reg 0x10: [mem 0xf3939000-0xf39393ff]
>[    0.044241] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.044296] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
>[    0.044445] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
>[    0.044462] pci 0000:00:1f.2: reg 0x10: [io  0x70a8-0x70af]
>[    0.044469] pci 0000:00:1f.2: reg 0x14: [io  0x70b4-0x70b7]
>[    0.044477] pci 0000:00:1f.2: reg 0x18: [io  0x70a0-0x70a7]
>[    0.044484] pci 0000:00:1f.2: reg 0x1c: [io  0x70b0-0x70b3]
>[    0.044492] pci 0000:00:1f.2: reg 0x20: [io  0x7060-0x707f]
>[    0.044499] pci 0000:00:1f.2: reg 0x24: [mem 0xf3938000-0xf39387ff]
>[    0.044538] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.044585] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
>[    0.044603] pci 0000:00:1f.3: reg 0x10: [mem 0xf3934000-0xf39340ff 64bit]
>[    0.044623] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
>[    0.044708] pci 0000:01:00.0: [10de:0def] type 00 class 0x030000
>[    0.044718] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf0ffffff]
>[    0.044724] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.044730] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
>[    0.044734] pci 0000:01:00.0: reg 0x24: [io  0x6000-0x607f]
>[    0.044738] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
>[    0.044743] pci 0000:01:00.0: enabling Extended Tags
>[    0.048021] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.048137] pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
>[    0.048139] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf10fffff]
>[    0.048141] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
>[    0.048366] pci 0000:02:00.0: [1180:e822] type 00 class 0x088001
>[    0.048413] pci 0000:02:00.0: reg 0x10: [mem 0xf3100000-0xf31000ff]
>[    0.048635] pci 0000:02:00.0: supports D1 D2
>[    0.048637] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.051190] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.051288] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
>[    0.051293] pci 0000:00:1c.0:   bridge window [mem 0xf3100000-0xf38fffff]
>[    0.051300] pci 0000:00:1c.0:   bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
>[    0.051483] pci 0000:03:00.0: [8086:0085] type 00 class 0x028000
>[    0.051708] pci 0000:03:00.0: reg 0x10: [mem 0xf3000000-0xf3001fff 64bit]
>[    0.052481] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
>[    0.055165] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.055266] pci 0000:00:1c.1:   bridge window [mem 0xf3000000-0xf30fffff]
>[    0.055330] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
>[    0.055428] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
>[    0.055432] pci 0000:00:1c.2:   bridge window [mem 0xf2800000-0xf2ffffff]
>[    0.055441] pci 0000:00:1c.2:   bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
>[    0.056273] ACPI: EC: interrupt unblocked
>[    0.056373] ACPI: EC: event unblocked
>[    0.056471] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
>[    0.056612] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
>[    0.056815] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    0.056815] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.057006] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
>[    0.057152] pci 0000:01:00.0: vgaarb: bridge control possible
>[    0.057247] pci 0000:00:02.0: vgaarb: no bridge control possible
>[    0.057344] vgaarb: loaded
>[    0.057507] SCSI subsystem initialized
>[    0.057613] libata version 3.00 loaded.
>[    0.057613] ACPI: bus type USB registered
>[    0.057613] usbcore: registered new interface driver usbfs
>[    0.058001] usbcore: registered new interface driver hub
>[    0.058018] usbcore: registered new device driver usb
>[    0.058125] pps_core: LinuxPPS API ver. 1 registered
>[    0.058223] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.058369] PTP clock support registered
>[    0.058480] EDAC MC: Ver: 3.0.0
>[    0.059037] Advanced Linux Sound Architecture Driver Initialized.
>[    0.059150] PCI: Using ACPI for IRQ routing
>[    0.059941] PCI: pci_cache_line_size set to 64 bytes
>[    0.061286] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
>[    0.061287] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
>[    0.061288] e820: reserve RAM buffer [mem 0xaede1000-0xafffffff]
>[    0.061289] e820: reserve RAM buffer [mem 0x23e600000-0x23fffffff]
>[    0.061381] NetLabel: Initializing
>[    0.061476] NetLabel:  domain hash size = 128
>[    0.061569] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    0.061675] NetLabel:  unlabeled traffic allowed by default
>[    0.061783] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.061783] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.065013] clocksource: Switched to clocksource tsc-early
>[    0.071908] VFS: Disk quotas dquot_6.6.0
>[    0.072023] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.072168] pnp: PnP ACPI init
>[    0.072600] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>[    0.072703] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
>[    0.072800] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
>[    0.072897] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
>[    0.072994] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
>[    0.073094] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
>[    0.073190] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
>[    0.073288] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
>[    0.073386] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
>[    0.073483] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
>[    0.073581] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
>[    0.073679] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
>[    0.073777] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
>[    0.073875] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
>[    0.073972] system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved
>[    0.074072] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
>[    0.074171] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
>[    0.074272] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.074347] pnp 00:01: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
>[    0.074501] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
>[    0.074711] system 00:01: [io  0x0400-0x047f] has been reserved
>[    0.074810] system 00:01: [io  0x0500-0x057f] has been reserved
>[    0.074907] system 00:01: [io  0x0800-0x080f] has been reserved
>[    0.075006] system 00:01: [io  0x15e0-0x15ef] has been reserved
>[    0.075104] system 00:01: [io  0x1600-0x167f] has been reserved
>[    0.075201] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
>[    0.076540] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.076637] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.076733] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.076830] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.076927] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
>[    0.077030] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.077070] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.077086] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
>[    0.077101] pnp 00:04: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active)
>[    0.077136] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
>[    0.077539] pnp: PnP ACPI: found 6 devices
>[    0.083620] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.083769] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
>[    0.083956] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
>[    0.084102] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.084199] pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
>[    0.084297] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf10fffff]
>[    0.084395] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
>[    0.084538] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.084636] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
>[    0.084736] pci 0000:00:1c.0:   bridge window [mem 0xf3100000-0xf38fffff]
>[    0.084836] pci 0000:00:1c.0:   bridge window [mem 0xf1800000-0xf1ffffff 64bit pref]
>[    0.084984] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.085085] pci 0000:00:1c.1:   bridge window [mem 0xf3000000-0xf30fffff]
>[    0.085191] pci 0000:00:1c.2: PCI bridge to [bus 04-0b]
>[    0.085288] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
>[    0.085390] pci 0000:00:1c.2:   bridge window [mem 0xf2800000-0xf2ffffff]
>[    0.085490] pci 0000:00:1c.2:   bridge window [mem 0xf2000000-0xf27fffff 64bit pref]
>[    0.085639] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.085640] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.085641] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.085642] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff window]
>[    0.085644] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
>[    0.085645] pci_bus 0000:01: resource 0 [io  0x6000-0x6fff]
>[    0.085646] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
>[    0.085647] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
>[    0.085648] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
>[    0.085650] pci_bus 0000:02: resource 1 [mem 0xf3100000-0xf38fffff]
>[    0.085651] pci_bus 0000:02: resource 2 [mem 0xf1800000-0xf1ffffff 64bit pref]
>[    0.085652] pci_bus 0000:03: resource 1 [mem 0xf3000000-0xf30fffff]
>[    0.085653] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
>[    0.085654] pci_bus 0000:04: resource 1 [mem 0xf2800000-0xf2ffffff]
>[    0.085655] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf27fffff 64bit pref]
>[    0.085723] NET: Registered protocol family 2
>[    0.085928] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
>[    0.086100] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.086338] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.086552] TCP: Hash tables configured (established 65536 bind 65536)
>[    0.086679] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.086797] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.086941] NET: Registered protocol family 1
>[    0.087114] RPC: Registered named UNIX socket transport module.
>[    0.087213] RPC: Registered udp transport module.
>[    0.087306] RPC: Registered tcp transport module.
>[    0.087400] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.087573] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.087808] pci 0000:00:14.0: CONFIG_USB_XHCI_HCD is turned off, defaulting to EHCI.
>[    0.087950] pci 0000:00:14.0: USB 3.0 devices will work at USB 2.0 speeds.
>[    0.088473] PCI: CLS 64 bytes, default 64
>[    0.088501] Unpacking initramfs...
>[    0.361371] Freeing initrd memory: 19924K
>[    0.361493] DMAR: Host address width 36
>[    0.361590] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
>[    0.361697] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
>[    0.361841] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
>[    0.361940] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
>[    0.362089] DMAR: RMRR base: 0x000000ba44a000 end: 0x000000ba460fff
>[    0.362189] DMAR: RMRR base: 0x000000bb800000 end: 0x000000bf9fffff
>[    0.362297] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.362398] software IO TLB [mem 0xaade1000-0xaede1000] (64MB) mapped at [00000000d4339adb-00000000e1d1566a]
>[    0.362642] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
>[    0.362786] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
>[    0.362882] RAPL PMU: hw unit of domain package 2^-16 Joules
>[    0.362976] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
>[    0.363557] Scanning for low memory corruption every 60 seconds
>[    0.364193] Initialise system trusted keyrings
>[    0.364312] workingset: timestamp_bits=56 max_order=21 bucket_order=0
>[    0.366181] NFS: Registering the id_resolver key type
>[    0.366283] Key type id_resolver registered
>[    0.366378] Key type id_legacy registered
>[    0.366543] SELinux:  Registering netfilter hooks
>[    0.367174] Key type asymmetric registered
>[    0.367272] Asymmetric key parser 'x509' registered
>[    0.367394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.367539] io scheduler noop registered
>[    0.367631] io scheduler deadline registered
>[    0.367754] io scheduler cfq registered (default)
>[    0.367851] io scheduler mq-deadline registered
>[    0.367945] io scheduler kyber registered
>[    0.368966] ACPI: AC Adapter [AC] (on-line)
>[    0.369116] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>[    0.369269] ACPI: Lid Switch [LID]
>[    0.369389] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>[    0.369539] ACPI: Sleep Button [SLPB]
>[    0.369667] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    0.369813] ACPI: Power Button [PWRF]
>[    0.370486] Monitor-Mwait will be used to enter C-1 state
>[    0.370490] Monitor-Mwait will be used to enter C-2 state
>[    0.373019] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.373117] ACPI: Thermal Zone [THM0] (59 C)
>[    0.373275] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.373797] Non-volatile memory driver v1.3
>[    0.373962] Linux agpgart interface v0.103
>[    0.374295] [drm:intel_pch_type] Found PantherPoint PCH
>[    0.374297] [drm:i915_driver_load] WOPCM size: 1024KiB
>[    0.374300] [drm:intel_uc_init_early] enable_guc=0 (submission:no huc:no)
>[    0.374301] [drm:intel_uc_init_early] guc_log_level=0 (enabled:no, verbose:no, verbosity:0)
>[    0.374303] [drm:intel_power_domains_init] Allowed DC state mask 00
>[    0.374445] [drm:i915_driver_load] ppgtt mode: 1
>[    0.374455] [drm:i915_ggtt_probe_hw] GGTT size = 2048M
>[    0.374457] [drm:i915_ggtt_probe_hw] GMADR size = 256M
>[    0.374458] [drm:i915_ggtt_probe_hw] DSM size = 64M
>[    0.374459] [drm] Replacing VGA console driver
>[    0.375998] Console: switching to colour dummy device 80x25
>[    0.376039] [drm:i915_gem_init_stolen] GEN6_STOLEN_RESERVED = bf900007
>[    0.376041] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 65536K, usable: 64512K
>[    0.376051] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbaf55018
>[    0.376056] [drm:intel_opregion_setup] Public ACPI methods supported
>[    0.376057] [drm:intel_opregion_setup] SWSCI supported
>[    0.379052] [drm:intel_opregion_setup] SWSCI GBDA callbacks 00000483, SBCB callbacks 00000203
>[    0.379054] [drm:intel_opregion_setup] ASLE supported
>[    0.379056] [drm:intel_opregion_setup] ASLE extension supported
>[    0.379058] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    0.379089] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    0.379091] [drm] Driver supports precise vblank timestamp query.
>[    0.379095] [drm:intel_bios_init] Set default to SSC at 120000 kHz
>[    0.379097] [drm:intel_bios_init] VBT signature "$VBT SNB/IVB-MOBILE ", BDB version 168
>[    0.379099] [drm:intel_bios_init] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    0.379101] [drm:intel_bios_init] crt_ddc_bus_pin: 2
>[    0.379104] [drm:intel_opregion_get_panel_type] Failed to get panel details from OpRegion (-22)
>[    0.379105] [drm:intel_bios_init] Panel type: 2 (VBT)
>[    0.379106] [drm:intel_bios_init] DRRS supported mode is static
>[    0.379109] [drm:intel_bios_init] Found panel mode in BIOS VBT tables:
>[    0.379113] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 0 110000 1600 1664 1706 2010 900 903 906 912 0x8 0xa
>[    0.379114] [drm:intel_bios_init] VBT initial LVDS value 30033c
>[    0.379116] [drm:intel_bios_init] VBT backlight PWM modulation frequency 220 Hz, active high, min brightness 3, level 255, controller 0
>[    0.379118] [drm:intel_bios_init] Found SDVO panel mode in BIOS VBT tables:
>[    0.379120] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    0.379122] [drm:intel_bios_init] DRRS State Enabled:1
>[    0.379124] [drm:intel_bios_init] No SDVO device info is found in VBT
>[    0.379139] [drm:intel_dsm_detect] no _DSM method for intel device
>[    0.379235] [drm:intel_dsm_detect] no _DSM method for intel device
>[    0.379241] [drm:i915_driver_load] rawclk rate: 125000 kHz
>[    0.379243] [drm:intel_power_well_enable] enabling always-on
>[    0.379445] [drm:intel_fbc_init] Sanitized enable_fbc value: 0
>[    0.379449] [drm:intel_print_wm_latency] Primary WM0 latency 12 (1.2 usec)
>[    0.379450] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec)
>[    0.379452] [drm:intel_print_wm_latency] Primary WM2 latency 16 (8.0 usec)
>[    0.379454] [drm:intel_print_wm_latency] Primary WM3 latency 32 (16.0 usec)
>[    0.379456] [drm:intel_print_wm_latency] Sprite WM0 latency 12 (1.2 usec)
>[    0.379458] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec)
>[    0.379460] [drm:intel_print_wm_latency] Sprite WM2 latency 16 (8.0 usec)
>[    0.379462] [drm:intel_print_wm_latency] Sprite WM3 latency 32 (16.0 usec)
>[    0.379464] [drm:intel_print_wm_latency] Cursor WM0 latency 12 (1.2 usec)
>[    0.379466] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec)
>[    0.379467] [drm:intel_print_wm_latency] Cursor WM2 latency 16 (8.0 usec)
>[    0.379469] [drm:intel_print_wm_latency] Cursor WM3 latency 32 (16.0 usec)
>[    0.379475] [drm:intel_modeset_init] 3 display pipes available.
>[    0.379511] [drm:intel_modeset_init] FDI PLL freq=270000
>[    0.379514] [drm:intel_dump_cdclk_state] Current CDCLK 400000 kHz, VCO 0 kHz, ref 0 kHz, bypass 0 kHz, voltage level 0
>[    0.379516] [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz
>[    0.379518] [drm:intel_modeset_init] Max dotclock rate: 360000 kHz
>[    0.379522] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
>[    0.379846] [drm:intel_lvds_init] LVDS PPS:t1+t2 300 t3 300 t4 5000 t5 3000 tx 2000 divider 6249 port 0 powerdown_on_reset 1
>[    0.381777] ACPI: Battery Slot [BAT0] (battery present)
>[    0.400031] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[    0.400036] [drm:drm_add_display_info] non_desktop set to 0
>[    0.400066] [drm:drm_add_display_info] non_desktop set to 0
>[    0.400073] [drm:intel_lvds_init] using preferred mode from EDID: 
>[    0.400080] [drm:drm_mode_debug_printmodeline] Modeline 67:"1600x900" 60 110000 1600 1664 1706 2010 900 903 906 912 0x48 0xa
>[    0.400102] [drm:intel_panel_setup_backlight] Connector LVDS-1 backlight initialized, enabled, brightness 69/4437
>[    0.400106] [drm:intel_lvds_init] detected dual-link lvds configuration
>[    0.400121] [drm:intel_crt_reset] crt adpa set to 0xf40000
>[    0.400130] [drm:intel_init_pch_refclk] has_panel 1 has_lvds 1 has_ck505 0 using_ssc_source 1
>[    0.400133] [drm:intel_init_pch_refclk] Using SSC on panel
>[    0.400555] [drm:intel_modeset_setup_hw_state] pipe A active planes 0x0
>[    0.400557] [drm:intel_modeset_setup_hw_state] pipe A active planes 0x0
>[    0.400558] [drm:intel_modeset_setup_hw_state] pipe A active planes 0x0
>[    0.400560] [drm:intel_modeset_setup_hw_state] [CRTC:39:pipe A] hw state readout: enabled
>[    0.400562] [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0
>[    0.400564] [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0
>[    0.400565] [drm:intel_modeset_setup_hw_state] pipe B active planes 0x0
>[    0.400567] [drm:intel_modeset_setup_hw_state] [CRTC:51:pipe B] hw state readout: disabled
>[    0.400569] [drm:intel_modeset_setup_hw_state] pipe C active planes 0x0
>[    0.400571] [drm:intel_modeset_setup_hw_state] pipe C active planes 0x0
>[    0.400572] [drm:intel_modeset_setup_hw_state] pipe C active planes 0x0
>[    0.400574] [drm:intel_modeset_setup_hw_state] [CRTC:63:pipe C] hw state readout: disabled
>[    0.400581] [drm:intel_modeset_setup_hw_state] PCH DPLL A hw state readout: crtc_mask 0x00000001, on 1
>[    0.400586] [drm:intel_modeset_setup_hw_state] PCH DPLL B hw state readout: crtc_mask 0x00000000, on 0
>[    0.400591] [drm:intel_modeset_setup_hw_state] [ENCODER:65:LVDS] hw state readout: enabled, pipe A
>[    0.400594] [drm:intel_modeset_setup_hw_state] [ENCODER:72:CRT] hw state readout: disabled, pipe A
>[    0.400598] [drm:intel_modeset_setup_hw_state] [CONNECTOR:64:LVDS-1] hw state readout: enabled
>[    0.400601] [drm:intel_modeset_setup_hw_state] [CONNECTOR:71:VGA-1] hw state readout: disabled
>[    0.400607] [drm:intel_dump_pipe_config] [CRTC:39:pipe A][setup_hw_state]
>[    0.400609] [drm:intel_dump_pipe_config] output_types: LVDS (0x10)
>[    0.400610] [drm:intel_dump_pipe_config] cpu_transcoder: A, pipe bpp: 18, dithering: 0
>[    0.400612] [drm:intel_dump_pipe_config] fdi: lanes: 1; gmch_m: 7689557, gmch_n: 8388608, link_m: 213598, link_n: 524288, tu: 64
>[    0.400613] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    0.400614] [drm:intel_dump_pipe_config] requested mode:
>[    0.400617] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 110357 1600 1664 1706 2010 900 903 906 912 0x40 0xa
>[    0.400618] [drm:intel_dump_pipe_config] adjusted mode:
>[    0.400621] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 110357 1600 1664 1706 2010 900 903 906 912 0x40 0xa
>[    0.400623] [drm:intel_dump_pipe_config] crtc timings: 110357 1600 1664 1706 2010 900 903 906 912, type: 0x40 flags: 0xa
>[    0.400624] [drm:intel_dump_pipe_config] port clock: 110357, pipe src size: 720x400, pixel rate 110357
>[    0.400626] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x06400384, enabled
>[    0.400627] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[    0.400629] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x89086008, dpll_md: 0x0, fp0: 0x21106, fp1: 0x30d07
>[    0.400630] [drm:intel_dump_pipe_config] planes on this crtc
>[    0.400631] [drm:intel_dump_pipe_config] [PLANE:28:primary A] disabled, scaler_id = 0
>[    0.400632] [drm:intel_dump_pipe_config] [PLANE:31:sprite A] disabled, scaler_id = 0
>[    0.400634] [drm:intel_dump_pipe_config] [PLANE:36:cursor A] disabled, scaler_id = 0
>[    0.400635] [drm:intel_dump_pipe_config] [CRTC:51:pipe B][setup_hw_state]
>[    0.400636] [drm:intel_dump_pipe_config] output_types:  (0x0)
>[    0.400638] [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[    0.400639] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    0.400640] [drm:intel_dump_pipe_config] requested mode:
>[    0.400642] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    0.400643] [drm:intel_dump_pipe_config] adjusted mode:
>[    0.400645] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    0.400648] [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    0.400649] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0
>[    0.400650] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    0.400651] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[    0.400653] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[    0.400654] [drm:intel_dump_pipe_config] planes on this crtc
>[    0.400655] [drm:intel_dump_pipe_config] [PLANE:40:primary B] disabled, scaler_id = 0
>[    0.400657] [drm:intel_dump_pipe_config] [PLANE:43:sprite B] disabled, scaler_id = 0
>[    0.400658] [drm:intel_dump_pipe_config] [PLANE:48:cursor B] disabled, scaler_id = 0
>[    0.400659] [drm:intel_dump_pipe_config] [CRTC:63:pipe C][setup_hw_state]
>[    0.400660] [drm:intel_dump_pipe_config] output_types:  (0x0)
>[    0.400662] [drm:intel_dump_pipe_config] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[    0.400663] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    0.400664] [drm:intel_dump_pipe_config] requested mode:
>[    0.400666] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    0.400667] [drm:intel_dump_pipe_config] adjusted mode:
>[    0.400669] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    0.400671] [drm:intel_dump_pipe_config] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    0.400673] [drm:intel_dump_pipe_config] port clock: 0, pipe src size: 0x0, pixel rate 0
>[    0.400674] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    0.400675] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[    0.400676] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[    0.400677] [drm:intel_dump_pipe_config] planes on this crtc
>[    0.400679] [drm:intel_dump_pipe_config] [PLANE:52:primary C] disabled, scaler_id = 0
>[    0.400680] [drm:intel_dump_pipe_config] [PLANE:55:sprite C] disabled, scaler_id = 0
>[    0.400681] [drm:intel_dump_pipe_config] [PLANE:60:cursor C] disabled, scaler_id = 0
>[    0.400709] [drm:intel_wopcm_init] Calculated GuC WOPCM Region: [16KiB, 1008KiB)
>[    0.400968] [drm:i915_gem_init_ggtt] clearing unused GTT space: [1000, 80000000]
>[    0.402826] [drm:i915_ppgtt_create] Allocated pde space (2M) at GTT entry: 7fe00
>[    0.402828] [drm:i915_ppgtt_create] Adding PPGTT at offset 7fe00000
>[    0.402831] [drm:i915_gem_contexts_init] logical context support initialized
>[    0.402904] [drm:intel_engine_init_common] rcs0 hws offset: 0x7fdfd000
>[    0.402911] [drm:intel_engine_create_scratch] rcs0 pipe control offset: 0x7fdfc000
>[    0.402958] [drm:intel_engine_init_common] bcs0 hws offset: 0x7fdfb000
>[    0.403031] [drm:intel_engine_init_common] vcs0 hws offset: 0x7fdfa000
>[    0.403038] [drm:intel_init_gt_powersave] Overclocking supported, max: 1250MHz, overclock: 1250MHz
>[    0.403055] [drm:init_workarounds_ring] rcs0: Number of context specific w/a: 0
>[    0.403188] [drm:intel_fbdev_init] pipe A not active or no fb, skipping
>[    0.403189] [drm:intel_fbdev_init] pipe B not active or no fb, skipping
>[    0.403191] [drm:intel_fbdev_init] pipe C not active or no fb, skipping
>[    0.403192] [drm:intel_fbdev_init] no active fbs found, not using BIOS config
>[    0.403420] [drm:intel_backlight_device_register] Connector LVDS-1 backlight sysfs interface registered
>[    0.403442] [drm] Initialized i915 1.6.0 20180308 for 0000:00:02.0 on minor 0
>[    0.403515] [drm:intel_opregion_register] 2 outputs detected
>[    0.403674] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>[    0.403857] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
>[    0.403934] ACPI: Video Device [VID1] (multi-head: yes  rom: yes  post: no)
>[    0.404050] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input4
>[    0.404074] i915 device info: pciid=0x0166 rev=0x09 platform=IVYBRIDGE gen=7
>[    0.404076] [drm:drm_setup_crtcs] 
>[    0.404077] i915 device info: is_mobile: yes
>[    0.404078] i915 device info: is_lp: no
>[    0.404079] i915 device info: is_alpha_support: no
>[    0.404082] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:LVDS-1]
>[    0.404083] i915 device info: has_64bit_reloc: no
>[    0.404085] [drm:intel_lvds_detect] [CONNECTOR:64:LVDS-1]
>[    0.404086] i915 device info: has_aliasing_ppgtt: yes
>[    0.404089] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:LVDS-1] status updated from unknown to connected
>[    0.404089] i915 device info: has_csr: no
>[    0.404090] i915 device info: has_ddi: no
>[    0.404091] i915 device info: has_dp_mst: no
>[    0.404093] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[    0.404094] i915 device info: has_reset_engine: no
>[    0.404096] [drm:drm_add_display_info] non_desktop set to 0
>[    0.404096] i915 device info: has_fbc: yes
>[    0.404097] i915 device info: has_fpga_dbg: no
>[    0.404098] i915 device info: has_full_ppgtt: yes
>[    0.404099] i915 device info: has_full_48bit_ppgtt: no
>[    0.404100] i915 device info: has_gmch_display: no
>[    0.404101] i915 device info: has_guc: no
>[    0.404102] i915 device info: has_guc_ct: no
>[    0.404103] i915 device info: has_hotplug: yes
>[    0.404104] i915 device info: has_l3_dpf: yes
>[    0.404104] i915 device info: has_llc: yes
>[    0.404105] i915 device info: has_logical_ring_contexts: no
>[    0.404106] i915 device info: has_logical_ring_elsq: no
>[    0.404107] i915 device info: has_logical_ring_preemption: no
>[    0.404108] i915 device info: has_overlay: no
>[    0.404109] i915 device info: has_pooled_eu: no
>[    0.404110] i915 device info: has_psr: no
>[    0.404111] i915 device info: has_rc6: yes
>[    0.404112] i915 device info: has_rc6p: yes
>[    0.404113] i915 device info: has_resource_streamer: no
>[    0.404114] i915 device info: has_runtime_pm: no
>[    0.404115] i915 device info: has_snoop: no
>[    0.404116] i915 device info: unfenced_needs_alignment: no
>[    0.404117] i915 device info: cursor_needs_physical: no
>[    0.404117] i915 device info: hws_needs_physical: no
>[    0.404118] i915 device info: overlay_needs_physical: no
>[    0.404119] i915 device info: supports_tv: no
>[    0.404120] i915 device info: has_ipc: no
>[    0.404121] i915 device info: slice total: 0, mask=0000
>[    0.404122] i915 device info: subslice total: 0
>[    0.404123] i915 device info: EU total: 0
>[    0.404124] i915 device info: EU per subslice: 0
>[    0.404125] i915 device info: has slice power gating: no
>[    0.404127] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:LVDS-1] probed modes :
>[    0.404128] i915 device info: has subslice power gating: no
>[    0.404131] [drm:drm_mode_debug_printmodeline] Modeline 67:"1600x900" 60 110000 1600 1664 1706 2010 900 903 906 912 0x48 0xa
>[    0.404132] i915 device info: has EU power gating: no
>[    0.404135] [drm:drm_mode_debug_printmodeline] Modeline 68:"1600x900" 40 73330 1600 1664 1706 2010 900 903 906 912 0x40 0xa
>[    0.404136] i915 device info: CS timestamp frequency: 12500 kHz
>[    0.404138] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
>[    0.404141] [drm:intel_crt_detect] [CONNECTOR:71:VGA-1] force=1
>[    0.404147] [drm:intel_crt_detect] trigger hotplug detect cycle: adpa=0x3f40000
>[    0.405440] loop: module loaded
>[    0.405516] ahci 0000:00:1f.2: version 3.0
>[    0.405649] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
>[    0.413042] [drm:intel_crt_detect] ironlake hotplug adpa=0x3f40000, result 1
>[    0.413045] [drm:intel_crt_detect] CRT detected via hotplug
>[    0.413053] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] status updated from unknown to connected
>[    0.416056] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
>[    0.416070] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst 
>[    0.422475] scsi host0: ahci
>[    0.422562] scsi host1: ahci
>[    0.422624] scsi host2: ahci
>[    0.422689] scsi host3: ahci
>[    0.422745] scsi host4: ahci
>[    0.422806] scsi host5: ahci
>[    0.422840] ata1: SATA max UDMA/133 abar m2048@0xf3938000 port 0xf3938100 irq 25
>[    0.422848] ata2: SATA max UDMA/133 abar m2048@0xf3938000 port 0xf3938180 irq 25
>[    0.422850] ata3: DUMMY
>[    0.422851] ata4: DUMMY
>[    0.422856] ata5: SATA max UDMA/133 abar m2048@0xf3938000 port 0xf3938300 irq 25
>[    0.422858] ata6: DUMMY
>[    0.422946] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.422950] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.422967] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.422969] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.422986] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
>[    0.422989] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>[    0.423112] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
>[    0.433014] [drm:drm_add_display_info] non_desktop set to 0
>[    0.433018] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[    0.433020] [drm:drm_add_display_info] non_desktop set to 0
>[    0.433115] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] probed modes :
>[    0.433118] [drm:drm_mode_debug_printmodeline] Modeline 75:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
>[    0.433121] [drm:drm_mode_debug_printmodeline] Modeline 82:"1680x1050" 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6
>[    0.433123] [drm:drm_mode_debug_printmodeline] Modeline 88:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    0.433125] [drm:drm_mode_debug_printmodeline] Modeline 78:"1280x1024" 72 132840 1280 1368 1504 1728 1024 1025 1028 1067 0x0 0x6
>[    0.433127] [drm:drm_mode_debug_printmodeline] Modeline 79:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    0.433130] [drm:drm_mode_debug_printmodeline] Modeline 81:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
>[    0.433132] [drm:drm_mode_debug_printmodeline] Modeline 80:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
>[    0.433134] [drm:drm_mode_debug_printmodeline] Modeline 77:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    0.433137] [drm:drm_mode_debug_printmodeline] Modeline 89:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    0.433139] [drm:drm_mode_debug_printmodeline] Modeline 90:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    0.433141] [drm:drm_mode_debug_printmodeline] Modeline 91:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    0.433144] [drm:drm_mode_debug_printmodeline] Modeline 92:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    0.433146] [drm:drm_mode_debug_printmodeline] Modeline 93:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[    0.433148] [drm:drm_mode_debug_printmodeline] Modeline 83:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    0.433150] [drm:drm_mode_debug_printmodeline] Modeline 84:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    0.433153] [drm:drm_mode_debug_printmodeline] Modeline 85:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
>[    0.433155] [drm:drm_mode_debug_printmodeline] Modeline 76:"640x480" 66 26885 640 664 728 816 480 481 484 499 0x0 0x6
>[    0.433157] [drm:drm_mode_debug_printmodeline] Modeline 86:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    0.433159] [drm:drm_mode_debug_printmodeline] Modeline 87:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    0.433162] [drm:drm_setup_crtcs] connector 64 enabled? yes
>[    0.433163] [drm:drm_setup_crtcs] connector 71 enabled? yes
>[    0.433168] [drm:intel_fb_initial_config] Not using firmware configuration
>[    0.433170] [drm:drm_setup_crtcs] looking for cmdline mode on connector 64
>[    0.433171] [drm:drm_setup_crtcs] looking for preferred mode on connector 64 0
>[    0.433172] [drm:drm_setup_crtcs] found mode 1600x900
>[    0.433173] [drm:drm_setup_crtcs] looking for cmdline mode on connector 71
>[    0.433175] [drm:drm_setup_crtcs] looking for preferred mode on connector 71 0
>[    0.433176] [drm:drm_setup_crtcs] found mode 1680x1050
>[    0.433177] [drm:drm_setup_crtcs] picking CRTCs for 8192x8192 config
>[    0.433181] [drm:drm_setup_crtcs] desired mode 1600x900 set on crtc 39 (0,0)
>[    0.433182] [drm:drm_setup_crtcs] desired mode 1680x1050 set on crtc 51 (0,0)
>[    0.433185] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    0.433984] [drm:intelfb_create] allocated 1680x1050 fb: 0x00061000
>[    0.434027] fbcon: inteldrmfb (fb0) is primary device
>[    0.434098] [drm:intel_atomic_check] [CONNECTOR:64:LVDS-1] checking for sink bpp constrains
>[    0.434099] [drm:intel_atomic_check] clamping display bpp (was 36) to EDID reported max of 18
>[    0.434102] [drm:intel_atomic_check] checking fdi config on pipe A, lanes 1
>[    0.434104] [drm:intel_atomic_check] hw max bpp: 36, pipe bpp: 18, dithering: 1
>[    0.434106] [drm:intel_dump_pipe_config] [CRTC:39:pipe A][modeset]
>[    0.434107] [drm:intel_dump_pipe_config] output_types: LVDS (0x10)
>[    0.434109] [drm:intel_dump_pipe_config] cpu_transcoder: A, pipe bpp: 18, dithering: 1
>[    0.434111] [drm:intel_dump_pipe_config] fdi: lanes: 1; gmch_m: 3844778, gmch_n: 4194304, link_m: 213598, link_n: 524288, tu: 64
>[    0.434112] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    0.434113] [drm:intel_dump_pipe_config] requested mode:
>[    0.434116] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 110000 1600 1664 1706 2010 900 903 906 912 0x48 0xa
>[    0.434117] [drm:intel_dump_pipe_config] adjusted mode:
>[    0.434119] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x900" 60 110000 1600 1664 1706 2010 900 903 906 912 0x48 0xa
>[    0.434121] [drm:intel_dump_pipe_config] crtc timings: 110000 1600 1664 1706 2010 900 903 906 912, type: 0x48 flags: 0xa
>[    0.434123] [drm:intel_dump_pipe_config] port clock: 110000, pipe src size: 1600x900, pixel rate 110000
>[    0.434124] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    0.434125] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[    0.434127] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x89086008, dpll_md: 0x0, fp0: 0x21106, fp1: 0x30d07
>[    0.434128] [drm:intel_dump_pipe_config] planes on this crtc
>[    0.434130] [drm:intel_dump_pipe_config] [PLANE:28:primary A] disabled, scaler_id = 0
>[    0.434131] [drm:intel_dump_pipe_config] [PLANE:31:sprite A] disabled, scaler_id = 0
>[    0.434132] [drm:intel_dump_pipe_config] [PLANE:36:cursor A] disabled, scaler_id = 0
>[    0.434134] [drm:intel_atomic_check] [CONNECTOR:71:VGA-1] checking for sink bpp constrains
>[    0.434136] [drm:intel_atomic_check] clamping display bpp (was 36) to default limit of 24
>[    0.434138] [drm:intel_atomic_check] checking fdi config on pipe B, lanes 2
>[    0.434140] [drm:intel_atomic_check] hw max bpp: 36, pipe bpp: 24, dithering: 0
>[    0.434141] [drm:intel_dump_pipe_config] [CRTC:51:pipe B][modeset]
>[    0.434142] [drm:intel_dump_pipe_config] output_types: ANALOG (0x2)
>[    0.434144] [drm:intel_dump_pipe_config] cpu_transcoder: B, pipe bpp: 24, dithering: 0
>[    0.434146] [drm:intel_dump_pipe_config] fdi: lanes: 2; gmch_m: 6815744, gmch_n: 8388608, link_m: 283989, link_n: 524288, tu: 64
>[    0.434147] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
>[    0.434148] [drm:intel_dump_pipe_config] requested mode:
>[    0.434151] [drm:drm_mode_debug_printmodeline] Modeline 0:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
>[    0.434152] [drm:intel_dump_pipe_config] adjusted mode:
>[    0.434154] [drm:drm_mode_debug_printmodeline] Modeline 0:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
>[    0.434156] [drm:intel_dump_pipe_config] crtc timings: 146250 1680 1784 1960 2240 1050 1053 1059 1089, type: 0x48 flags: 0x6
>[    0.434158] [drm:intel_dump_pipe_config] port clock: 146250, pipe src size: 1680x1050, pixel rate 146250
>[    0.434159] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    0.434160] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[    0.434162] [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
>[    0.434163] [drm:intel_dump_pipe_config] planes on this crtc
>[    0.434164] [drm:intel_dump_pipe_config] [PLANE:40:primary B] disabled, scaler_id = 0
>[    0.434165] [drm:intel_dump_pipe_config] [PLANE:43:sprite B] disabled, scaler_id = 0
>[    0.434166] [drm:intel_dump_pipe_config] [PLANE:48:cursor B] disabled, scaler_id = 0
>[    0.434173] [drm:ironlake_crtc_compute_clock] using SSC reference clock of 120000 kHz
>[    0.434191] [drm:intel_find_shared_dpll] [CRTC:39:pipe A] allocated PCH DPLL A
>[    0.434192] [drm:intel_reference_shared_dpll] using PCH DPLL A for pipe A
>[    0.434213] [drm:intel_find_shared_dpll] [CRTC:51:pipe B] allocated PCH DPLL B
>[    0.434214] [drm:intel_reference_shared_dpll] using PCH DPLL B for pipe B
>[    0.434233] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    0.434238] [drm:intel_disable_pipe] disabling pipe A
>[    0.507130] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
>[    0.589461] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:39:60:99
>[    0.589463] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
>[    0.589518] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
>[    0.589540] sky2: driver version 1.30
>[    0.589665] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.589665] ehci-pci: EHCI PCI platform driver
>[    0.589755] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    0.589811] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    0.589826] ehci-pci 0000:00:1a.0: debug port 2
>[    0.593720] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    0.593731] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf393a000
>[    0.600032] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    0.600104] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.600105] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.600107] usb usb1: Product: EHCI Host Controller
>[    0.600108] usb usb1: Manufacturer: Linux 4.16.0-rc7+ ehci_hcd
>[    0.600109] usb usb1: SerialNumber: 0000:00:1a.0
>[    0.600264] hub 1-0:1.0: USB hub found
>[    0.600272] hub 1-0:1.0: 3 ports detected
>[    0.600478] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    0.600589] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.600603] ehci-pci 0000:00:1d.0: debug port 2
>[    0.604492] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    0.604503] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3939000
>[    0.611031] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    0.611098] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.611100] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.611101] usb usb2: Product: EHCI Host Controller
>[    0.611102] usb usb2: Manufacturer: Linux 4.16.0-rc7+ ehci_hcd
>[    0.611103] usb usb2: SerialNumber: 0000:00:1d.0
>[    0.611299] hub 2-0:1.0: USB hub found
>[    0.611304] hub 2-0:1.0: 3 ports detected
>[    0.611411] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.611416] ohci-pci: OHCI PCI platform driver
>[    0.611428] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.611459] usbcore: registered new interface driver usblp
>[    0.611478] usbcore: registered new interface driver usb-storage
>[    0.611515] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>[    0.613308] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.613311] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    0.613729] rtc_cmos 00:02: RTC can wake from S4
>[    0.613855] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>[    0.613884] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    0.613991] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>[    0.614745] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
>[    0.614750] intel_pstate: Intel P-state driver initializing
>[    0.614830] hidraw: raw HID events driver (C) Jiri Kosina
>[    0.615141] usbcore: registered new interface driver usbhid
>[    0.615141] usbhid: USB HID core driver
>[    0.615301] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
>[    0.616483] Initializing XFRM netlink socket
>[    0.616692] NET: Registered protocol family 10
>[    0.617148] Segment Routing with IPv6
>[    0.617309] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
>[    0.617544] NET: Registered protocol family 17
>[    0.617568] Key type dns_resolver registered
>[    0.618048] microcode: sig=0x306a9, pf=0x10, revision=0x1f
>[    0.618118] microcode: Microcode Update Driver: v2.2.
>[    0.618135] sched_clock: Marking stable (618108335, 0)->(621539981, -3431646)
>[    0.618461] registered taskstats version 1
>[    0.618462] Loading compiled-in X.509 certificates
>[    0.619334]   Magic number: 10:460:324
>[    0.619375] tty tty49: hash matches
>[    0.619410] acpi PNP0B00:00: hash matches
>[    0.669253] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 39
>[    0.669264] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
>[    0.669489] [drm:intel_atomic_commit_tail] [ENCODER:65:LVDS]
>[    0.669492] [drm:intel_atomic_commit_tail] [ENCODER:72:CRT]
>[    0.669496] [drm:verify_single_dpll_state.isra.116] PCH DPLL A
>[    0.669505] [drm:verify_single_dpll_state.isra.116] PCH DPLL B
>[    0.669518] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A
>[    0.670095] [drm:intel_enable_pipe] enabling pipe A
>[    0.670266] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR before link train 0x700
>[    0.670276] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x700
>[    0.670280] [drm:ivb_manual_fdi_link_train] FDI train 1 done, level 0.
>[    0.670289] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x600
>[    0.670292] [drm:ivb_manual_fdi_link_train] FDI train 2 done, level 0.
>[    0.670296] [drm:ironlake_crtc_enable] FDI train done.
>[    0.670304] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 1, on? 0) for crtc 39
>[    0.670306] [drm:intel_enable_shared_dpll] enabling PCH DPLL A
>[    0.733057] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    0.734816] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[    0.734821] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    0.735093] ata1.00: supports DRM functions and may not be fully accessible
>[    0.735587] ata1.00: NCQ Send/Recv Log not supported
>[    0.735591] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT01B6Q, max UDMA/133
>[    0.735594] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>[    0.737100] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[    0.737105] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    0.737322] ata1.00: supports DRM functions and may not be fully accessible
>[    0.737680] ata1.00: NCQ Send/Recv Log not supported
>[    0.738501] ata1.00: configured for UDMA/133
>[    0.922044] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    0.930043] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.050473] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.050477] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.050774] hub 1-1:1.0: USB hub found
>[    1.050937] hub 1-1:1.0: 6 ports detected
>[    1.058741] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.058745] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.058971] hub 2-1:1.0: USB hub found
>[    1.059099] hub 2-1:1.0: 8 ports detected
>[    1.265025] [drm:intel_panel_enable_backlight] pipe A
>[    1.265038] [drm:intel_panel_actually_set_backlight] set backlight PWM = 69
>[    1.271255] [drm:intel_prepare_shared_dpll] setting up PCH DPLL B
>[    1.271824] [drm:intel_enable_pipe] enabling pipe B
>[    1.271838] [drm:cpt_set_fdi_bc_bifurcation] enabling fdi C rx
>[    1.271998] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR before link train 0x0
>[    1.272029] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x100
>[    1.272033] [drm:ivb_manual_fdi_link_train] FDI train 1 done, level 0.
>[    1.272042] [drm:ivb_manual_fdi_link_train] FDI_RX_IIR 0x600
>[    1.272046] [drm:ivb_manual_fdi_link_train] FDI train 2 done, level 0.
>[    1.272050] [drm:ironlake_crtc_enable] FDI train done.
>[    1.272057] [drm:intel_enable_shared_dpll] enable PCH DPLL B (active 2, on? 0) for crtc 51
>[    1.272059] [drm:intel_enable_shared_dpll] enabling PCH DPLL B
>[    1.306750] [drm:verify_connector_state.isra.115] [CONNECTOR:64:LVDS-1]
>[    1.306764] [drm:intel_atomic_commit_tail] [CRTC:39:pipe A]
>[    1.306787] [drm:verify_single_dpll_state.isra.116] PCH DPLL A
>[    1.306801] [drm:verify_connector_state.isra.115] [CONNECTOR:71:VGA-1]
>[    1.306806] [drm:intel_atomic_commit_tail] [CRTC:51:pipe B]
>[    1.306823] [drm:verify_single_dpll_state.isra.116] PCH DPLL B
>[    1.306869] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffffbd098b60)
>[    1.316907] hdaudio hdaudioC0D0: Unable to bind the codec
>[    1.328039] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
>[    1.328822] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
>[    1.329742] Console: switching to colour frame buffer device 200x56
>[    1.336070] usb 2-1.8: new high-speed USB device number 3 using ehci-pci
>[    1.377009] tsc: Refined TSC clocksource calibration: 2893.429 MHz
>[    1.377417] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    1.378325] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b503c3395, max_idle_ns: 440795255992 ns
>[    1.396453] console [netcon0] enabled
>[    1.397456] netconsole: network logging started
>[    1.398463] clocksource: Switched to clocksource tsc
>[    1.398466] [drm:drm_fb_helper_hotplug_event.part.35] 
>[    1.398469] [drm:drm_setup_crtcs] 
>[    1.398499] cfg80211: Loading compiled-in X.509 certificates for regulatory database
>[    1.399949] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>[    1.400801] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:LVDS-1]
>[    1.400805] [drm:intel_lvds_detect] [CONNECTOR:64:LVDS-1]
>[    1.400810] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[    1.401869] [drm:drm_add_display_info] non_desktop set to 0
>[    1.401874] ALSA device list:
>[    1.401900] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:LVDS-1] probed modes :
>[    1.402936] [drm:drm_mode_debug_printmodeline] Modeline 67:"1600x900" 60 110000 1600 1664 1706 2010 900 903 906 912 0x48 0xa
>[    1.402936]   No soundcards found.
>[    1.402963] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
>[    1.403976] [drm:drm_mode_debug_printmodeline] Modeline 68:"1600x900" 40 73330 1600 1664 1706 2010 900 903 906 912 0x40 0xa
>[    1.405030] cfg80211: failed to load regulatory.db
>[    1.406404] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
>[    1.406409] [drm:intel_crt_detect] [CONNECTOR:71:VGA-1] force=1
>[    1.406414] [drm:intel_crt_detect] ironlake hotplug adpa=0xa3f40010, result 1
>[    1.406416] [drm:intel_crt_detect] CRT detected via hotplug
>[    1.406483] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
>[    1.407511] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.407529] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
>[    1.408267] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
>[    1.409305] sd 0:0:0:0: [sda] Write Protect is off
>[    1.410072] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
>[    1.412509] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.412534] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.415901]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
>[    1.416443] usb 2-1.8: New USB device found, idVendor=17ef, idProduct=100a
>[    1.417118] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.417657] usb 2-1.8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.419998] hub 2-1.8:1.0: USB hub found
>[    1.420745] [drm:drm_add_display_info] non_desktop set to 0
>[    1.421474] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[    1.421477] [drm:drm_add_display_info] non_desktop set to 0
>[    1.421594] hub 2-1.8:1.0: 6 ports detected
>[    1.421656] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] probed modes :
>[    1.423362] [drm:drm_mode_debug_printmodeline] Modeline 75:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
>[    1.423366] [drm:drm_mode_debug_printmodeline] Modeline 82:"1680x1050" 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6
>[    1.423370] [drm:drm_mode_debug_printmodeline] Modeline 88:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.423374] [drm:drm_mode_debug_printmodeline] Modeline 78:"1280x1024" 72 132840 1280 1368 1504 1728 1024 1025 1028 1067 0x0 0x6
>[    1.423378] [drm:drm_mode_debug_printmodeline] Modeline 79:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.423382] [drm:drm_mode_debug_printmodeline] Modeline 81:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
>[    1.423386] [drm:drm_mode_debug_printmodeline] Modeline 80:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
>[    1.423390] [drm:drm_mode_debug_printmodeline] Modeline 77:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    1.423394] [drm:drm_mode_debug_printmodeline] Modeline 89:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    1.423398] [drm:drm_mode_debug_printmodeline] Modeline 90:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    1.423410] [drm:drm_mode_debug_printmodeline] Modeline 91:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.423413] [drm:drm_mode_debug_printmodeline] Modeline 92:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    1.423416] [drm:drm_mode_debug_printmodeline] Modeline 93:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[    1.423420] [drm:drm_mode_debug_printmodeline] Modeline 83:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.423424] [drm:drm_mode_debug_printmodeline] Modeline 84:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    1.423426] [drm:drm_mode_debug_printmodeline] Modeline 85:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
>[    1.423428] [drm:drm_mode_debug_printmodeline] Modeline 76:"640x480" 66 26885 640 664 728 816 480 481 484 499 0x0 0x6
>[    1.423431] [drm:drm_mode_debug_printmodeline] Modeline 86:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.423445] [drm:drm_mode_debug_printmodeline] Modeline 87:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    1.423448] [drm:drm_setup_crtcs] connector 64 enabled? yes
>[    1.423450] [drm:drm_setup_crtcs] connector 71 enabled? yes
>[    1.423455] [drm:intel_fb_initial_config] Not using firmware configuration
>[    1.423458] [drm:drm_setup_crtcs] looking for cmdline mode on connector 64
>[    1.423459] [drm:drm_setup_crtcs] looking for preferred mode on connector 64 0
>[    1.423461] [drm:drm_setup_crtcs] found mode 1600x900
>[    1.423462] [drm:drm_setup_crtcs] looking for cmdline mode on connector 71
>[    1.423464] [drm:drm_setup_crtcs] looking for preferred mode on connector 71 0
>[    1.423465] [drm:drm_setup_crtcs] found mode 1680x1050
>[    1.423467] [drm:drm_setup_crtcs] picking CRTCs for 1680x1050 config
>[    1.423472] [drm:drm_setup_crtcs] desired mode 1600x900 set on crtc 39 (0,0)
>[    1.423474] [drm:drm_setup_crtcs] desired mode 1680x1050 set on crtc 51 (0,0)
>[    1.426139] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c531
>[    1.427148] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.428148] usb 1-1.2: Product: USB Receiver
>[    1.429139] usb 1-1.2: Manufacturer: Logitech
>[    1.432442] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C531.0001/input/input8
>[    1.433588] hid-generic 0003:046D:C531.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0
>[    1.436982] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C531.0002/input/input9
>[    1.439521] [drm:drm_fb_helper_hotplug_event.part.35] 
>[    1.439524] [drm:drm_setup_crtcs] 
>[    1.439528] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:LVDS-1]
>[    1.439532] [drm:intel_lvds_detect] [CONNECTOR:64:LVDS-1]
>[    1.439535] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[    1.439538] [drm:drm_add_display_info] non_desktop set to 0
>[    1.439574] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:64:LVDS-1] probed modes :
>[    1.439580] [drm:drm_mode_debug_printmodeline] Modeline 67:"1600x900" 60 110000 1600 1664 1706 2010 900 903 906 912 0x48 0xa
>[    1.439584] [drm:drm_mode_debug_printmodeline] Modeline 68:"1600x900" 40 73330 1600 1664 1706 2010 900 903 906 912 0x40 0xa
>[    1.439586] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1]
>[    1.439590] [drm:intel_crt_detect] [CONNECTOR:71:VGA-1] force=1
>[    1.439597] [drm:intel_crt_detect] ironlake hotplug adpa=0xa3f40010, result 1
>[    1.439598] [drm:intel_crt_detect] CRT detected via hotplug
>[    1.453374] [drm:drm_add_display_info] non_desktop set to 0
>[    1.453384] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[    1.453388] [drm:drm_add_display_info] non_desktop set to 0
>[    1.453605] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:71:VGA-1] probed modes :
>[    1.453612] [drm:drm_mode_debug_printmodeline] Modeline 75:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x48 0x6
>[    1.453618] [drm:drm_mode_debug_printmodeline] Modeline 82:"1680x1050" 75 187000 1680 1800 1976 2272 1050 1053 1059 1099 0x40 0x6
>[    1.453624] [drm:drm_mode_debug_printmodeline] Modeline 88:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.453629] [drm:drm_mode_debug_printmodeline] Modeline 78:"1280x1024" 72 132840 1280 1368 1504 1728 1024 1025 1028 1067 0x0 0x6
>[    1.453635] [drm:drm_mode_debug_printmodeline] Modeline 79:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    1.453640] [drm:drm_mode_debug_printmodeline] Modeline 81:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
>[    1.453646] [drm:drm_mode_debug_printmodeline] Modeline 80:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x40 0x6
>[    1.453651] [drm:drm_mode_debug_printmodeline] Modeline 77:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    1.453657] [drm:drm_mode_debug_printmodeline] Modeline 89:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    1.453662] [drm:drm_mode_debug_printmodeline] Modeline 90:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    1.453668] [drm:drm_mode_debug_printmodeline] Modeline 91:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    1.453673] [drm:drm_mode_debug_printmodeline] Modeline 92:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    1.453678] [drm:drm_mode_debug_printmodeline] Modeline 93:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[    1.453684] [drm:drm_mode_debug_printmodeline] Modeline 83:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    1.453689] [drm:drm_mode_debug_printmodeline] Modeline 84:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    1.453695] [drm:drm_mode_debug_printmodeline] Modeline 85:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
>[    1.453700] [drm:drm_mode_debug_printmodeline] Modeline 76:"640x480" 66 26885 640 664 728 816 480 481 484 499 0x0 0x6
>[    1.453706] [drm:drm_mode_debug_printmodeline] Modeline 86:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    1.453711] [drm:drm_mode_debug_printmodeline] Modeline 87:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    1.453715] [drm:drm_setup_crtcs] connector 64 enabled? yes
>[    1.453718] [drm:drm_setup_crtcs] connector 71 enabled? yes
>[    1.453726] [drm:intel_fb_initial_config] Not using firmware configuration
>[    1.453730] [drm:drm_setup_crtcs] looking for cmdline mode on connector 64
>[    1.453733] [drm:drm_setup_crtcs] looking for preferred mode on connector 64 0
>[    1.453735] [drm:drm_setup_crtcs] found mode 1600x900
>[    1.453738] [drm:drm_setup_crtcs] looking for cmdline mode on connector 71
>[    1.453740] [drm:drm_setup_crtcs] looking for preferred mode on connector 71 0
>[    1.453743] [drm:drm_setup_crtcs] found mode 1680x1050
>[    1.453746] [drm:drm_setup_crtcs] picking CRTCs for 1680x1050 config
>[    1.453754] [drm:drm_setup_crtcs] desired mode 1600x900 set on crtc 39 (0,0)
>[    1.453758] [drm:drm_setup_crtcs] desired mode 1680x1050 set on crtc 51 (0,0)
>[    1.455454] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
>[    1.490417] hid-generic 0003:046D:C531.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1
>[    1.556050] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
>[    1.637366] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020
>[    1.639788] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.642189] usb 1-1.3: Product: Biometric Coprocessor
>[    1.643500] usb 1-1.3: Manufacturer: Auth
>[    1.709033] usb 2-1.8.4: new low-speed USB device number 4 using ehci-pci
>[    1.711293] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
>[    1.717518] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.721603] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[    1.721611] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    1.725154] ata2.00: ATA-10: Micron_1100_MTFDDAK256TBN,  M0MU001, max UDMA/133
>[    1.727692] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.730806] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
>[    1.730811] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
>[    1.733493] ata2.00: configured for UDMA/133
>[    1.734712] scsi 1:0:0:0: Direct-Access     ATA      Micron_1100_MTFD U001 PQ: 0 ANSI: 5
>[    1.737565] ata2.00: Enabling discard_zeroes_data
>[    1.737611] sd 1:0:0:0: Attached scsi generic sg1 type 0
>[    1.738583] sd 1:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
>[    1.743565] sd 1:0:0:0: [sdb] Write Protect is off
>[    1.746056] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    1.746083] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.747113] ata2.00: Enabling discard_zeroes_data
>[    1.748203]  sdb: sdb1
>[    1.749253] ata2.00: Enabling discard_zeroes_data
>[    1.750191] sd 1:0:0:0: [sdb] Attached SCSI disk
>[    1.794979] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
>[    1.797205] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    1.799415] usb 1-1.4: Product: BCM20702A0
>[    1.801618] usb 1-1.4: Manufacturer: Broadcom Corp
>[    1.802682] usb 1-1.4: SerialNumber: 3C77E6F1FB84
>[    1.811628] usb 2-1.8.4: New USB device found, idVendor=046d, idProduct=c01e
>[    1.812684] usb 2-1.8.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.814097] usb 2-1.8.4: Product: USB-PS/2 Optical Mouse
>[    1.815494] usb 2-1.8.4: Manufacturer: Logitech
>[    1.820347] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.4/2-1.8.4:1.0/0003:046D:C01E.0003/input/input11
>[    1.821871] hid-generic 0003:046D:C01E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.8.4/input0
>[    1.869074] usb 1-1.6: new high-speed USB device number 6 using ehci-pci
>[    1.900050] usb 2-1.8.6: new low-speed USB device number 5 using ehci-pci
>[    1.957119] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5
>[    1.959430] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.961702] usb 1-1.6: Product: Integrated Camera
>[    1.963975] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
>[    2.018518] usb 2-1.8.6: New USB device found, idVendor=06a3, idProduct=8020
>[    2.020810] usb 2-1.8.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.023068] usb 2-1.8.6: Product: Saitek Eclipse Keyboard
>[    2.025319] usb 2-1.8.6: Manufacturer: Chicony
>[    2.040188] input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.6/2-1.8.6:1.0/0003:06A3:8020.0004/input/input12
>[    2.045734] ata5: SATA link down (SStatus 0 SControl 300)
>[    2.050084] Freeing unused kernel memory: 1224K
>[    2.052370] Write protecting the kernel read-only data: 18432k
>[    2.055428] Freeing unused kernel memory: 2004K
>[    2.060060] Freeing unused kernel memory: 1024K
>[    2.095195] hid-generic 0003:06A3:8020.0004: input,hidraw3: USB HID v1.11 Keyboard [Chicony Saitek Eclipse Keyboard] on usb-0000:00:1d.0-1.8.6/input0
>[    2.116937] input: Chicony Saitek Eclipse Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8.6/2-1.8.6:1.1/0003:06A3:8020.0005/input/input13
>[    2.150890] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
>[    2.156684] setfont (1349) used greatest stack depth: 14016 bytes left
>[    2.170140] hid-generic 0003:06A3:8020.0005: input,hiddev97,hidraw4: USB HID v1.11 Device [Chicony Saitek Eclipse Keyboard] on usb-0000:00:1d.0-1.8.6/input1
>[    2.170492] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
>[    2.172984] systemd[1]: Failed to start Load Kernel Modules.
>[    2.178125] systemd[1]: systemd-modules-load.service: Unit entered failed state.
>[    2.179932] audit: type=1130 audit(1522401516.178:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
>[    2.179941] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
>[    2.186536] audit: type=1130 audit(1522401516.185:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.193477] audit: type=1130 audit(1522401516.192:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.199124] audit: type=1130 audit(1522401516.198:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.222131] audit: type=1130 audit(1522401516.221:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.225357] audit: type=1131 audit(1522401516.221:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.235679] audit: type=1130 audit(1522401516.234:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.264815] audit: type=1130 audit(1522401516.263:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.300025] audit: type=1130 audit(1522401516.298:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.361128] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input10
>[    2.377124] udevadm (1703) used greatest stack depth: 13784 bytes left
>[    2.395776] e1000e 0000:00:19.0 enp0s25: renamed from eth0
>[    2.534895] systemd-udevd (2082) used greatest stack depth: 13072 bytes left
>[    2.733219] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
>[    3.099855] systemd-journald[1347]: Received SIGTERM from PID 1 (systemd).
>[    3.212753] SELinux: 32768 avtab hash slots, 108906 rules.
>[    3.226897] SELinux: 32768 avtab hash slots, 108906 rules.
>[    3.252211] SELinux:  8 users, 14 roles, 5092 types, 316 bools, 1 sens, 1024 cats
>[    3.252213] SELinux:  97 classes, 108906 rules
>[    3.255411] SELinux:  Permission getrlimit in class process not defined in policy.
>[    3.256068] SELinux:  Class sctp_socket not defined in policy.
>[    3.256626] SELinux:  Class icmp_socket not defined in policy.
>[    3.257173] SELinux:  Class ax25_socket not defined in policy.
>[    3.257705] SELinux:  Class ipx_socket not defined in policy.
>[    3.258237] SELinux:  Class netrom_socket not defined in policy.
>[    3.258770] SELinux:  Class atmpvc_socket not defined in policy.
>[    3.259294] SELinux:  Class x25_socket not defined in policy.
>[    3.259810] SELinux:  Class rose_socket not defined in policy.
>[    3.260331] SELinux:  Class decnet_socket not defined in policy.
>[    3.260850] SELinux:  Class atmsvc_socket not defined in policy.
>[    3.261356] SELinux:  Class rds_socket not defined in policy.
>[    3.261854] SELinux:  Class irda_socket not defined in policy.
>[    3.262340] SELinux:  Class pppox_socket not defined in policy.
>[    3.262830] SELinux:  Class llc_socket not defined in policy.
>[    3.263314] SELinux:  Class can_socket not defined in policy.
>[    3.263789] SELinux:  Class tipc_socket not defined in policy.
>[    3.264263] SELinux:  Class bluetooth_socket not defined in policy.
>[    3.264745] SELinux:  Class iucv_socket not defined in policy.
>[    3.265218] SELinux:  Class rxrpc_socket not defined in policy.
>[    3.265690] SELinux:  Class isdn_socket not defined in policy.
>[    3.266162] SELinux:  Class phonet_socket not defined in policy.
>[    3.266632] SELinux:  Class ieee802154_socket not defined in policy.
>[    3.267101] SELinux:  Class caif_socket not defined in policy.
>[    3.267574] SELinux:  Class alg_socket not defined in policy.
>[    3.268048] SELinux:  Class nfc_socket not defined in policy.
>[    3.268517] SELinux:  Class vsock_socket not defined in policy.
>[    3.268983] SELinux:  Class kcm_socket not defined in policy.
>[    3.269455] SELinux:  Class qipcrtr_socket not defined in policy.
>[    3.269928] SELinux:  Class smc_socket not defined in policy.
>[    3.270406] SELinux:  Class bpf not defined in policy.
>[    3.270887] SELinux: the above unknown classes and permissions will be allowed
>[    3.271390] SELinux:  policy capability network_peer_controls=1
>[    3.271895] SELinux:  policy capability open_perms=1
>[    3.272398] SELinux:  policy capability extended_socket_class=0
>[    3.272902] SELinux:  policy capability always_check_network=0
>[    3.273403] SELinux:  policy capability cgroup_seclabel=1
>[    3.273907] SELinux:  policy capability nnp_nosuid_transition=1
>[    3.274413] SELinux:  Completing initialization.
>[    3.274414] SELinux:  Setting up existing superblocks.
>[    3.295191] systemd[1]: Successfully loaded SELinux policy in 110.067ms.
>[    3.305231] systemd[1]: RTC configured in localtime, applying delta of -300 minutes to system time.
>[    3.329974] systemd[1]: Relabelled /dev and /run in 20.379ms.
>[    3.553671] EXT4-fs (dm-0): re-mounted. Opts: (null)
>[    3.562059] bbswitch: loading out-of-tree module taints kernel.
>[    3.562266] bbswitch: version 0.8
>[    3.562272] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.VID_
>[    3.562278] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG_.VID_
>[    3.562286] ACPI Warning: \_SB.PCI0.PEG.VID._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180105/nsarguments-100)
>[    3.562634] bbswitch: detected an Optimus _DSM function
>[    3.562644] pci 0000:01:00.0: enabling device (0000 -> 0003)
>[    3.562676] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
>[    3.603616] systemd-journald[2404]: Received request to flush runtime journal from PID 1
>[    3.808612] [drm:intel_lvds_detect] [CONNECTOR:64:LVDS-1]
>[    3.840914] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=4437/4437
>[    3.840917] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4437
>[    3.963312] Adding 8290300k swap on /dev/sda6.  Priority:-2 extents:1 across:8290300k SS
>[    4.189620] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
>[    4.237289] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
>[    4.490983] random: crng init done
>[    4.539475] [drm:intel_lvds_detect] [CONNECTOR:64:LVDS-1]
>[    5.444514] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[    5.680317] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
>[    9.268041] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
>[    9.269701] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready

Actions: View

Attachments on bug 105811: 138431 | 138444 | 138445 | 138446 | 139108 | 139146 | 139147 | 139175 | 139469

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.