Attachment 142188 Details for Bug 108546 – lspci -vvv output for good-working configuration

lspci -vvv output for good-working configuration

lspci-good.txt (text/plain), 24.04 KB, created by Takashi Iwai on 2018-10-25 06:45:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Takashi Iwai

Created: 2018-10-25 06:45:35 UTC

Size: 24.04 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation Device 3e30 (rev 0a)
>	Subsystem: Intel Corporation Device 7270
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information: Len=10 <?>
>
>00:02.0 VGA compatible controller: Intel Corporation Device 3e98 (prog-if 00 [VGA controller])
>	Subsystem: Intel Corporation Device 2212
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 255
>	Region 0: Memory at b0000000 (64-bit, non-prefetchable) [size=16M]
>	Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M]
>	Region 4: I/O ports at 3000 [size=64]
>	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
>	Capabilities: [40] Vendor Specific Information: Len=0c <?>
>	Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
>			 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
>			 AtomicOpsCtl: ReqEn-
>	Capabilities: [ac] MSI: Enable- Count=1/1 Maskable- 64bit-
>		Address: 00000000  Data: 0000
>	Capabilities: [d0] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [100 v1] Process Address Space ID (PASID)
>		PASIDCap: Exec- Priv-, Max PASID Width: 14
>		PASIDCtl: Enable- Exec- Priv-
>	Capabilities: [200 v1] Address Translation Service (ATS)
>		ATSCap:	Invalidate Queue Depth: 00
>		ATSCtl:	Enable-, Smallest Translation Unit: 00
>	Capabilities: [300 v1] Page Request Interface (PRI)
>		PRICtl: Enable- Reset-
>		PRISta: RF- UPRGI- Stopped+
>		Page Request Capacity: 00008000, Page Request Allocation: 00000000
>	Kernel modules: i915
>
>00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 0a)
>	Subsystem: Intel Corporation Device 7270
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin A routed to IRQ 255
>	Region 0: Memory at b1230000 (64-bit, non-prefetchable) [disabled] [size=32K]
>	Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
>		Address: 00000000  Data: 0000
>	Capabilities: [d0] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
>
>00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model
>	Subsystem: Intel Corporation Device 7270
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin A routed to IRQ 255
>	Region 0: Memory at b1244000 (64-bit, non-prefetchable) [disabled] [size=4K]
>	Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
>		Address: 00000000  Data: 0000
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [f0] PCI Advanced Features
>		AFCap: TP+ FLR+
>		AFCtrl: FLR-
>		AFStatus: TP-
>
>00:12.0 Signal processing controller: Intel Corporation Device a379 (rev 10)
>	Subsystem: Intel Corporation Device 7270
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin A routed to IRQ 255
>	Region 0: Memory at b1245000 (64-bit, non-prefetchable) [size=4K]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
>		Address: 00000000  Data: 0000
>
>00:14.0 USB controller: Intel Corporation Device a36d (rev 10) (prog-if 30 [XHCI])
>	Subsystem: Intel Corporation Device 7270
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 125
>	Region 0: Memory at b1220000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
>		Address: 00000000fee00278  Data: 0000
>	Capabilities: [90] Vendor Specific Information: Len=14 <?>
>	Kernel driver in use: xhci_hcd
>	Kernel modules: xhci_pci
>
>00:14.2 RAM memory: Intel Corporation Device a36f (rev 10)
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Region 0: Memory at b1240000 (64-bit, non-prefetchable) [disabled] [size=8K]
>	Region 2: Memory at b1246000 (64-bit, non-prefetchable) [disabled] [size=4K]
>	Capabilities: [80] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>
>00:14.3 Network controller: Intel Corporation Device a370 (rev 10)
>	Subsystem: Intel Corporation Device 0030
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at b1238000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [c8] Power Management version 3
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR+, OBFF Via WAKE#
>			 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
>		DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis-, LTR+, OBFF Disabled
>			 AtomicOpsCtl: ReqEn-
>	Capabilities: [80] MSI-X: Enable+ Count=16 Masked-
>		Vector table: BAR=0 offset=00002000
>		PBA: BAR=0 offset=00003000
>	Capabilities: [100 v0] #00
>	Capabilities: [14c v1] Latency Tolerance Reporting
>		Max snoop latency: 0ns
>		Max no snoop latency: 0ns
>	Capabilities: [164 v1] Vendor Specific Information: ID=0010 Rev=0 Len=014 <?>
>	Kernel driver in use: iwlwifi
>	Kernel modules: iwlwifi
>
>00:14.5 SD Host controller: Intel Corporation Device a375 (rev 10) (prog-if 01)
>	Subsystem: Intel Corporation Device 7270
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 19
>	Region 0: Memory at b1247000 (64-bit, non-prefetchable) [size=4K]
>	Capabilities: [80] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [90] Vendor Specific Information: Len=14 <?>
>	Kernel driver in use: sdhci-pci
>	Kernel modules: sdhci_pci
>
>00:15.0 Serial bus controller [0c80]: Intel Corporation Device a368 (rev 10)
>	Subsystem: Intel Corporation Device 7270
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=4K]
>	Capabilities: [80] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [90] Vendor Specific Information: Len=14 <?>
>	Kernel driver in use: intel-lpss
>	Kernel modules: intel_lpss_pci
>
>00:15.1 Serial bus controller [0c80]: Intel Corporation Device a369 (rev 10)
>	Subsystem: Intel Corporation Device 7270
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 17
>	Region 0: Memory at 90001000 (64-bit, non-prefetchable) [size=4K]
>	Capabilities: [80] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [90] Vendor Specific Information: Len=14 <?>
>	Kernel driver in use: intel-lpss
>	Kernel modules: intel_lpss_pci
>
>00:16.0 Communication controller: Intel Corporation Device a360 (rev 10)
>	Subsystem: Intel Corporation Device 7270
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 430
>	Region 0: Memory at b124a000 (64-bit, non-prefetchable) [size=4K]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee00378  Data: 0000
>	Capabilities: [a4] Vendor Specific Information: Len=14 <?>
>	Kernel driver in use: mei_me
>	Kernel modules: mei_me
>
>00:17.0 SATA controller: Intel Corporation Device a352 (rev 10) (prog-if 01 [AHCI 1.0])
>	Subsystem: Intel Corporation Device 7270
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 124
>	Region 0: Memory at b1242000 (32-bit, non-prefetchable) [size=8K]
>	Region 1: Memory at b124f000 (32-bit, non-prefetchable) [size=256]
>	Region 2: I/O ports at 3080 [size=8]
>	Region 3: I/O ports at 3088 [size=4]
>	Region 4: I/O ports at 3060 [size=32]
>	Region 5: Memory at b124e000 (32-bit, non-prefetchable) [size=2K]
>	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee00258  Data: 0000
>	Capabilities: [70] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
>	Kernel driver in use: ahci
>	Kernel modules: ahci
>
>00:1b.0 PCI bridge: Intel Corporation Device a340 (rev f0) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 122
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 0000f000-00000fff [empty]
>	Memory behind bridge: b1100000-b11fffff [size=1M]
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE+
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #17, Speed 8GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
>			ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 8GT/s, Width x2, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt+
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
>			Slot #16, PowerLimit 25.000W; Interlock- NoCompl+
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet- LinkState+
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>		DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd+
>			 AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd+
>			 AtomicOpsCtl: ReqEn- EgressBlck-
>		LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+
>			 EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
>	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee00218  Data: 0000
>	Capabilities: [90] Subsystem: Intel Corporation Device 7270
>	Capabilities: [a0] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [100 v1] Advanced Error Reporting
>		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UESvrt:	DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		AERCap:	First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
>			MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
>		HeaderLog: 00000000 00000000 00000000 00000000
>		RootCmd: CERptEn+ NFERptEn+ FERptEn+
>		RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
>			 FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
>		ErrorSrc: ERR_COR: 00d8 ERR_FATAL/NONFATAL: 0000
>	Capabilities: [140 v1] Access Control Services
>		ACSCap:	SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd- EgressCtrl- DirectTrans-
>		ACSCtl:	SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
>	Capabilities: [150 v1] Precision Time Measurement
>		PTMCap: Requester:- Responder:+ Root:+
>		PTMClockGranularity: 4ns
>		PTMControl: Enabled:+ RootSelected:+
>		PTMEffectiveGranularity: Unknown
>	Capabilities: [200 v1] L1 PM Substates
>		L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
>			  PortCommonModeRestoreTime=40us PortTPowerOnTime=44us
>		L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
>			   T_CommonMode=40us LTR1.2_Threshold=81920ns
>		L1SubCtl2: T_PwrOn=44us
>	Capabilities: [220 v1] #19
>	Capabilities: [250 v1] Downstream Port Containment
>		DpcCap:	INT Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
>		DpcCtl:	Trigger:2 Cmpl- INT+ ErrCor- PoisonedTLP- SwTrigger- DL_ActiveErr-
>		DpcSta:	Trigger- Reason:00 INT- RPBusy- TriggerExt:00 RP PIO ErrPtr:1f
>		Source:	0000
>	Kernel driver in use: pcieport
>	Kernel modules: shpchp
>
>00:1e.0 Communication controller: Intel Corporation Device a328 (rev 10)
>	Subsystem: Intel Corporation Device 7270
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at 90002000 (64-bit, non-prefetchable) [size=4K]
>	Capabilities: [80] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [90] Vendor Specific Information: Len=14 <?>
>	Kernel driver in use: intel-lpss
>	Kernel modules: intel_lpss_pci
>
>00:1f.0 ISA bridge: Intel Corporation Device a305 (rev 10)
>	Subsystem: Intel Corporation Device 7270
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>
>00:1f.3 Multimedia audio controller: Intel Corporation Device a348 (rev 10)
>	Subsystem: Intel Corporation Device 7270
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64
>	Interrupt: pin A routed to IRQ 448
>	Region 0: Memory at b123c000 (64-bit, non-prefetchable) [size=16K]
>	Region 4: Memory at b1000000 (64-bit, non-prefetchable) [size=1M]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] Vendor Specific Information: Len=14 <?>
>	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee005d8  Data: 0000
>	Kernel driver in use: snd_hda_intel
>	Kernel modules: snd_hda_intel
>
>00:1f.4 SMBus: Intel Corporation Device a323 (rev 10)
>	Subsystem: Intel Corporation Device 7270
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at b124c000 (64-bit, non-prefetchable) [size=256]
>	Region 4: I/O ports at efa0 [size=32]
>	Kernel driver in use: i801_smbus
>	Kernel modules: i2c_i801
>
>00:1f.5 Serial bus controller [0c80]: Intel Corporation Device a324 (rev 10)
>	Subsystem: Intel Corporation Device 7270
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Region 0: Memory at fe010000 (32-bit, non-prefetchable) [size=4K]
>
>00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (7) I219-V (rev 10)
>	Subsystem: Intel Corporation Device 0000
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 431
>	Region 0: Memory at b1200000 (32-bit, non-prefetchable) [size=128K]
>	Capabilities: [c8] Power Management version 3
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee00398  Data: 0000
>	Kernel driver in use: e1000e
>	Kernel modules: e1000e
>
>01:00.0 Non-Volatile memory controller: Intel Corporation Device 2522 (prog-if 02 [NVM Express])
>	Subsystem: Intel Corporation Device 3802
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	NUMA node: 0
>	Region 0: Memory at b1110000 (64-bit, non-prefetchable) [size=16K]
>	Region 4: Memory at b1100000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: [40] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] MSI-X: Enable+ Count=9 Masked-
>		Vector table: BAR=0 offset=00002000
>		PBA: BAR=0 offset=00003000
>	Capabilities: [60] Express (v2) Endpoint, MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
>		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>			RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 8GT/s, Width x2, ASPM not supported
>			ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 8GT/s, Width x2, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR+, OBFF Not Supported
>			 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled
>			 AtomicOpsCtl: ReqEn-
>		LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+
>			 EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
>	Capabilities: [a0] MSI: Enable- Count=1/16 Maskable+ 64bit+
>		Address: 0000000000000000  Data: 0000
>		Masking: 00000000  Pending: 00000000
>	Capabilities: [100 v1] Advanced Error Reporting
>		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		AERCap:	First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
>			MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
>		HeaderLog: 00000000 00000000 00000000 00000000
>	Capabilities: [150 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed- WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>			Status:	NegoPending- InProgress-
>	Capabilities: [180 v1] Power Budgeting <?>
>	Capabilities: [190 v1] Alternative Routing-ID Interpretation (ARI)
>		ARICap:	MFVC- ACS-, Next Function: 0
>		ARICtl:	MFVC- ACS-, Function Group: 0
>	Capabilities: [2a0 v1] #19
>	Capabilities: [2d0 v1] Latency Tolerance Reporting
>		Max snoop latency: 3145728ns
>		Max no snoop latency: 3145728ns
>	Capabilities: [310 v1] L1 PM Substates
>		L1SubCap: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- L1_PM_Substates-
>		L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1-
>
>		L1SubCtl2:
>	Kernel driver in use: nvme
>	Kernel modules: nvme
>

Actions: View

Attachments on bug 108546: 142188 | 142189 | 142258 | 142259 | 142333 | 142371 | 142372

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.