Attachment 143950 Details for Bug 110413 – lspci -vvv output for HP Spectre 360x

lspci -vvv output for HP Spectre 360x

lspci-vvv.log (text/x-log), 15.79 KB, created by Rémi Verschelde on 2019-04-12 14:44:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Rémi Verschelde

Created: 2019-04-12 14:44:42 UTC

Size: 15.79 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 05)
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: <access denied>
>
>00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) (rev 05) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 0000e000-0000efff [size=4K]
>	Memory behind bridge: de400000-de4fffff [size=1M]
>	Prefetchable memory behind bridge: 0000002fe0000000-0000002ff01fffff [size=258M]
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: <access denied>
>	Kernel driver in use: pcieport
>
>00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (rev 04) (prog-if 00 [VGA controller])
>	DeviceName:  Onboard IGD
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 132
>	Region 0: Memory at 2ffe000000 (64-bit, non-prefetchable) [size=16M]
>	Region 2: Memory at 2f80000000 (64-bit, prefetchable) [size=256M]
>	Region 4: I/O ports at f000 [size=64]
>	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
>	Capabilities: <access denied>
>	Kernel driver in use: i915
>	Kernel modules: i915
>
>00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 05)
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at 2fff020000 (64-bit, non-prefetchable) [size=32K]
>	Capabilities: <access denied>
>	Kernel driver in use: proc_thermal
>	Kernel modules: processor_thermal_device
>
>00:13.0 Non-VGA unclassified device: Intel Corporation 100 Series/C230 Series Chipset Family Integrated Sensor Hub (rev 31)
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at 2fff032000 (64-bit, non-prefetchable) [size=4K]
>	Capabilities: <access denied>
>	Kernel driver in use: intel_ish_ipc
>	Kernel modules: intel_ish_ipc
>
>00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31) (prog-if 30 [XHCI])
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 134
>	Region 0: Memory at 2fff010000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: <access denied>
>	Kernel driver in use: xhci_hcd
>	Kernel modules: xhci_pci
>
>00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31)
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin C routed to IRQ 18
>	Region 0: Memory at 2fff031000 (64-bit, non-prefetchable) [size=4K]
>	Capabilities: <access denied>
>	Kernel driver in use: intel_pch_thermal
>	Kernel modules: intel_pch_thermal
>
>00:15.0 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #0 (rev 31)
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at 2fff030000 (64-bit, non-prefetchable) [size=4K]
>	Capabilities: <access denied>
>	Kernel driver in use: intel-lpss
>	Kernel modules: intel_lpss_pci
>
>00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 136
>	Region 0: Memory at 2fff02f000 (64-bit, non-prefetchable) [size=4K]
>	Capabilities: <access denied>
>	Kernel driver in use: mei_me
>	Kernel modules: mei_me
>
>00:17.0 SATA controller: Intel Corporation HM170/QM170 Chipset SATA Controller [AHCI Mode] (rev 31) (prog-if 01 [AHCI 1.0])
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 123
>	Region 0: Memory at de504000 (32-bit, non-prefetchable) [size=8K]
>	Region 1: Memory at de507000 (32-bit, non-prefetchable) [size=256]
>	Region 2: I/O ports at f090 [size=8]
>	Region 3: I/O ports at f080 [size=4]
>	Region 4: I/O ports at f060 [size=32]
>	Region 5: Memory at de506000 (32-bit, non-prefetchable) [size=2K]
>	Capabilities: <access denied>
>	Kernel driver in use: ahci
>
>00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 (rev f1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin A routed to IRQ 16
>	Bus: primary=00, secondary=02, subordinate=6c, sec-latency=0
>	I/O behind bridge: 00002000-00002fff [size=4K]
>	Memory behind bridge: b0000000-de0fffff [size=737M]
>	Prefetchable memory behind bridge: 0000002f90000000-0000002fd9ffffff [size=1184M]
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: <access denied>
>	Kernel driver in use: pcieport
>
>00:1c.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 (rev f1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Bus: primary=00, secondary=6d, subordinate=6d, sec-latency=0
>	I/O behind bridge: 0000f000-00000fff [empty]
>	Memory behind bridge: de300000-de3fffff [size=1M]
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: <access denied>
>	Kernel driver in use: pcieport
>
>00:1c.5 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #6 (rev f1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 17
>	Bus: primary=00, secondary=6e, subordinate=6e, sec-latency=0
>	I/O behind bridge: 0000f000-00000fff [empty]
>	Memory behind bridge: de200000-de2fffff [size=1M]
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: <access denied>
>	Kernel driver in use: pcieport
>
>00:1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 (rev f1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Bus: primary=00, secondary=6f, subordinate=6f, sec-latency=0
>	I/O behind bridge: 0000f000-00000fff [empty]
>	Memory behind bridge: de100000-de1fffff [size=1M]
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA- VGA- VGA16+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: <access denied>
>	Kernel driver in use: pcieport
>
>00:1e.0 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO UART #0 (rev 31)
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at 2fff02e000 (64-bit, non-prefetchable) [size=4K]
>	Capabilities: <access denied>
>	Kernel driver in use: intel-lpss
>	Kernel modules: intel_lpss_pci
>
>00:1e.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO GSPI #0 (rev 31)
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin C routed to IRQ 22
>	Region 0: Memory at 2fff02d000 (64-bit, non-prefetchable) [size=4K]
>	Capabilities: <access denied>
>	Kernel driver in use: intel-lpss
>	Kernel modules: intel_lpss_pci
>
>00:1f.0 ISA bridge: Intel Corporation HM175 Chipset LPC/eSPI Controller (rev 31)
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>
>00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Region 0: Memory at de500000 (32-bit, non-prefetchable) [disabled] [size=16K]
>
>00:1f.3 Audio device: Intel Corporation CM238 HD Audio Controller (rev 31) (prog-if 80)
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 138
>	Region 0: Memory at 2fff028000 (64-bit, non-prefetchable) [size=16K]
>	Region 4: Memory at 2fff000000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: <access denied>
>	Kernel driver in use: snd_hda_intel
>	Kernel modules: snd_hda_intel
>
>00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at 2fff02c000 (64-bit, non-prefetchable) [size=256]
>	Region 4: I/O ports at f040 [size=32]
>	Kernel driver in use: i801_smbus
>	Kernel modules: i2c_i801
>
>01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Polaris 22 XL [Radeon RX Vega M GL] (rev c0)
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 135
>	Region 0: Memory at 2fe0000000 (64-bit, prefetchable) [size=256M]
>	Region 2: Memory at 2ff0000000 (64-bit, prefetchable) [size=2M]
>	Region 4: I/O ports at e000 [size=256]
>	Region 5: Memory at de400000 (32-bit, non-prefetchable) [size=256K]
>	Expansion ROM at de440000 [disabled] [size=128K]
>	Capabilities: <access denied>
>	Kernel driver in use: amdgpu
>	Kernel modules: amdgpu
>
>6d:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01)
>	DeviceName: Realtek PCIE CardReader
>	Subsystem: Hewlett-Packard Company Device 83bb
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 133
>	Region 1: Memory at de300000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: <access denied>
>	Kernel driver in use: rtsx_pci
>	Kernel modules: rtsx_pci
>
>6e:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)
>	DeviceName: Intel WLAN 8265 WindstormPeak ac 2x2 + BT 4.1 LE PCIe+USB NGFF 2230
>	Subsystem: Intel Corporation Device 9010
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 137
>	Region 0: Memory at de200000 (64-bit, non-prefetchable) [size=8K]
>	Capabilities: <access denied>
>	Kernel driver in use: iwlwifi
>	Kernel modules: iwlwifi
>
>6f:00.0 Non-Volatile memory controller: Toshiba America Info Systems Device 0116 (prog-if 02 [NVM Express])
>	Subsystem: Toshiba America Info Systems Device 0001
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	NUMA node: 0
>	Region 0: Memory at de100000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: <access denied>
>	Kernel driver in use: nvme
>

Actions: View

Attachments on bug 110413: 143950 | 143951 | 143952 | 143953 | 143958 | 143959 | 143960 | 143961 | 144926

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.