Attachment 144358 Details for Bug 108132 – dmesg from 5.1.4-arch1-1-ARCH with drm.debug=14

dmesg from 5.1.4-arch1-1-ARCH with drm.debug=14

dmesg.txt (text/plain), 120.49 KB, created by Yugge on 2019-05-28 05:59:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Yugge

Created: 2019-05-28 05:59:06 UTC

Size: 120.49 KB

patch

obsolete

>[    0.963840] EDAC MC: Ver: 3.0.0
>[    0.964129] Registered efivars operations
>[    1.014400] PCI: Using ACPI for IRQ routing
>[    1.036569] PCI: pci_cache_line_size set to 64 bytes
>[    1.036976] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
>[    1.036979] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
>[    1.036981] e820: reserve RAM buffer [mem 0x168b8000-0x17ffffff]
>[    1.036982] e820: reserve RAM buffer [mem 0x18388000-0x1bffffff]
>[    1.036983] e820: reserve RAM buffer [mem 0x2ee9e000-0x2fffffff]
>[    1.036985] e820: reserve RAM buffer [mem 0x2ffff000-0x2fffffff]
>[    1.036986] e820: reserve RAM buffer [mem 0x2c2000000-0x2c3ffffff]
>[    1.037165] NetLabel: Initializing
>[    1.037167] NetLabel:  domain hash size = 128
>[    1.037167] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
>[    1.037191] NetLabel:  unlabeled traffic allowed by default
>[    1.038069] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    1.038078] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
>[    1.040474] clocksource: Switched to clocksource tsc-early
>[    1.057570] VFS: Disk quotas dquot_6.6.0
>[    1.057615] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    1.057649] *** VALIDATE hugetlbfs ***
>[    1.057705] pnp: PnP ACPI init
>[    1.058027] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
>[    1.058030] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
>[    1.058031] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
>[    1.058033] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
>[    1.058035] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
>[    1.058037] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
>[    1.058038] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
>[    1.058045] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.058647] system 00:01: [io  0x2000-0x20fe] has been reserved
>[    1.058653] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.059056] system 00:02: [io  0x0680-0x069f] has been reserved
>[    1.059059] system 00:02: [io  0xffff] has been reserved
>[    1.059060] system 00:02: [io  0xffff] has been reserved
>[    1.059062] system 00:02: [io  0xffff] has been reserved
>[    1.059064] system 00:02: [io  0x1800-0x18fe] has been reserved
>[    1.059065] system 00:02: [io  0x164e-0x164f] has been reserved
>[    1.059070] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.059254] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    1.059321] system 00:04: [io  0x1854-0x1857] has been reserved
>[    1.059326] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    1.059388] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
>[    1.061748] system 00:06: [mem 0xfe029000-0xfe029fff] has been reserved
>[    1.061750] system 00:06: [mem 0xfe028000-0xfe028fff] has been reserved
>[    1.061755] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.062846] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
>[    1.062848] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
>[    1.062850] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
>[    1.062852] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
>[    1.062853] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    1.062855] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
>[    1.062857] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
>[    1.062859] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
>[    1.062861] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    1.062863] system 00:07: [mem 0x3d000000-0x3d01ffff] has been reserved
>[    1.062868] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.063527] pnp: PnP ACPI: found 8 devices
>[    1.069997] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    1.070017] pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 03-3b] add_size 1000
>[    1.070025] pci 0000:00:1d.0: BAR 13: assigned [io  0x4000-0x4fff]
>[    1.070028] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    1.070036] pci 0000:00:1c.0:   bridge window [mem 0x56200000-0x563fffff]
>[    1.070044] pci 0000:00:1c.4: PCI bridge to [bus 02]
>[    1.070048] pci 0000:00:1c.4:   bridge window [mem 0x56100000-0x561fffff]
>[    1.070056] pci 0000:00:1d.0: PCI bridge to [bus 03-3b]
>[    1.070060] pci 0000:00:1d.0:   bridge window [io  0x4000-0x4fff]
>[    1.070064] pci 0000:00:1d.0:   bridge window [mem 0x40000000-0x560fffff]
>[    1.070068] pci 0000:00:1d.0:   bridge window [mem 0x2fd0000000-0x2ff1ffffff 64bit pref]
>[    1.070075] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    1.070077] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    1.070079] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    1.070080] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
>[    1.070082] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
>[    1.070083] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
>[    1.070085] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
>[    1.070086] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
>[    1.070088] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
>[    1.070089] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
>[    1.070090] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
>[    1.070092] pci_bus 0000:00: resource 15 [mem 0x3d000000-0xdfffffff window]
>[    1.070094] pci_bus 0000:00: resource 16 [mem 0x2000000000-0x2fffffffff window]
>[    1.070095] pci_bus 0000:00: resource 17 [mem 0xfd000000-0xfe7fffff window]
>[    1.070097] pci_bus 0000:01: resource 1 [mem 0x56200000-0x563fffff]
>[    1.070099] pci_bus 0000:02: resource 1 [mem 0x56100000-0x561fffff]
>[    1.070100] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
>[    1.070102] pci_bus 0000:03: resource 1 [mem 0x40000000-0x560fffff]
>[    1.070103] pci_bus 0000:03: resource 2 [mem 0x2fd0000000-0x2ff1ffffff 64bit pref]
>[    1.070380] NET: Registered protocol family 2
>[    1.070708] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
>[    1.070753] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
>[    1.070935] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    1.071217] TCP: Hash tables configured (established 65536 bind 65536)
>[    1.071289] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    1.071326] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    1.071438] NET: Registered protocol family 1
>[    1.071445] NET: Registered protocol family 44
>[    1.071459] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    1.073538] PCI: CLS 64 bytes, default 64
>[    1.073606] Unpacking initramfs...
>[    1.283677] Freeing initrd memory: 11296K
>[    1.283758] DMAR: ACPI device "device:7a" under DMAR at fed91000 as 00:15.0
>[    1.283763] DMAR: ACPI device "device:7b" under DMAR at fed91000 as 00:15.1
>[    1.297235] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    1.297238] software IO TLB: mapped [mem 0x29dc1000-0x2ddc1000] (64MB)
>[    1.297312] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns
>[    1.297339] clocksource: Switched to clocksource tsc
>[    1.297552] check: Scanning for low memory corruption every 60 seconds
>[    1.298519] Initialise system trusted keyrings
>[    1.298533] Key type blacklist registered
>[    1.298594] workingset: timestamp_bits=41 max_order=21 bucket_order=0
>[    1.300447] zbud: loaded
>[    1.369595] Key type asymmetric registered
>[    1.369597] Asymmetric key parser 'x509' registered
>[    1.369612] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
>[    1.369674] io scheduler mq-deadline registered
>[    1.369675] io scheduler kyber registered
>[    1.369766] io scheduler bfq registered
>[    1.370506] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
>[    1.370854] pcieport 0000:00:1c.4: Signaling PME with IRQ 123
>[    1.371175] pcieport 0000:00:1d.0: Signaling PME with IRQ 124
>[    1.371212] pciehp 0000:00:1d.0:pcie004: Slot #8 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
>[    1.371376] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    1.371502] efifb: probing for efifb
>[    1.371526] efifb: showing boot graphics
>[    1.413140] efifb: framebuffer at 0xc0000000, using 32448k, total 32448k
>[    1.413142] efifb: mode is 3840x2160x32, linelength=15360, pages=1
>[    1.413142] efifb: scrolling: redraw
>[    1.413144] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    1.413206] fbcon: Deferring console take-over
>[    1.413207] fb0: EFI VGA frame buffer device
>[    1.413220] intel_idle: MWAIT substates: 0x11142120
>[    1.413221] intel_idle: v0.4.1 model 0x8E
>[    1.413951] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    1.414109] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>[    1.414119] ACPI: Lid Switch [LID0]
>[    1.414164] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>[    1.414172] ACPI: Power Button [PWRB]
>[    1.417482] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.419828] nvme nvme0: pci function 0000:02:00.0
>[    1.419889] usbcore: registered new interface driver usbserial_generic
>[    1.419896] usbserial: USB Serial support registered for generic
>[    1.419926] rtc_cmos 00:03: RTC can wake from S4
>[    1.420438] rtc_cmos 00:03: registered as rtc0
>[    1.420456] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
>[    1.420561] intel_pstate: Intel P-state driver initializing
>[    1.421241] intel_pstate: HWP enabled
>[    1.421452] ledtrig-cpu: registered to indicate activity on CPUs
>[    1.421510] intel_pmc_core:  initialized
>[    1.421669] NET: Registered protocol family 10
>[    1.427833] Segment Routing with IPv6
>[    1.427848] NET: Registered protocol family 17
>[    1.428631] RAS: Correctable Errors collector initialized.
>[    1.428731] microcode: sig=0x806ea, pf=0x80, revision=0xb4
>[    1.429015] microcode: Microcode Update Driver: v2.2.
>[    1.429023] sched_clock: Marking stable (1431613404, -2600352)->(1452624675, -23611623)
>[    1.429424] registered taskstats version 1
>[    1.429429] Loading compiled-in X.509 certificates
>[    1.432723] Loaded X.509 cert 'Build time autogenerated kernel key: 3b9bb2ef50642261f2eff7ee0a3d64824e8a3bd2'
>[    1.432770] zswap: loaded using pool lzo/zbud
>[    1.438741] Key type big_key registered
>[    1.439668] PM:   Magic number: 3:73:874
>[    1.439914] rtc_cmos 00:03: setting system clock to 2019-05-28T06:52:17 UTC (1559026337)
>[    1.636179] nvme nvme0: 8/0/0 default/read/poll queues
>[    1.639811]  nvme0n1: p1 p2 p3 p4
>[    1.643939] Freeing unused decrypted memory: 2040K
>[    1.644707] Freeing unused kernel image memory: 1564K
>[    1.671005] Write protecting the kernel read-only data: 18432k
>[    1.672346] Freeing unused kernel image memory: 2016K
>[    1.672847] Freeing unused kernel image memory: 328K
>[    1.696542] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    1.696545] x86/mm: Checking user space page tables
>[    1.711994] x86/mm: Checked W+X mappings: passed, no W+X pages found.
>[    1.711996] Run /init as init process
>[    1.800422] fbcon: Taking over console
>[    1.800510] Console: switching to colour frame buffer device 480x135
>[    1.889491] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    1.889492] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    1.895886] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.898453] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.898459] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    1.899540] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
>[    1.899546] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.900251] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
>[    1.900253] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.900254] usb usb1: Product: xHCI Host Controller
>[    1.900255] usb usb1: Manufacturer: Linux 5.1.4-arch1-1-ARCH xhci-hcd
>[    1.900256] usb usb1: SerialNumber: 0000:00:14.0
>[    1.900407] hub 1-0:1.0: USB hub found
>[    1.900424] hub 1-0:1.0: 12 ports detected
>[    1.902175] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.902177] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.902180] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
>[    1.902222] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.01
>[    1.902223] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.902228] usb usb2: Product: xHCI Host Controller
>[    1.902231] usb usb2: Manufacturer: Linux 5.1.4-arch1-1-ARCH xhci-hcd
>[    1.902232] usb usb2: SerialNumber: 0000:00:14.0
>[    1.902373] hub 2-0:1.0: USB hub found
>[    1.902388] hub 2-0:1.0: 6 ports detected
>[    1.902690] usb: port power management may be unreliable
>[    1.917654] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>[    1.971393] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
>[    1.997879] random: fast init done
>[    2.163718] systemd[1]: systemd 242.29-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
>[    2.181085] systemd[1]: Detected architecture x86-64.
>[    2.190629] systemd[1]: Set hostname to <scienter>.
>[    2.230610] usb 1-3: new full-speed USB device number 2 using xhci_hcd
>[    2.336940] systemd[1]: /usr/lib/systemd/system/docker.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/docker.sock â /run/docker.sock; please update the unit file accordingly.
>[    2.341074] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
>[    2.342982] systemd[1]: Created slice User and Session Slice.
>[    2.343449] systemd[1]: Created slice system-getty.slice.
>[    2.343561] systemd[1]: Listening on Journal Socket (/dev/log).
>[    2.343628] systemd[1]: Listening on udev Control Socket.
>[    2.343735] systemd[1]: Listening on Journal Audit Socket.
>[    2.363512] EXT4-fs (nvme0n1p2): re-mounted. Opts: (null)
>[    2.366169] random: lvm: uninitialized urandom read (4 bytes read)
>[    2.373338] usb 1-3: New USB device found, idVendor=06cb, idProduct=0081, bcdDevice= 1.64
>[    2.373341] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=1
>[    2.373343] usb 1-3: SerialNumber: 09dfb8868629
>[    2.375097] random: systemd-random-: uninitialized urandom read (512 bytes read)
>[    2.500480] usb 1-4: new high-speed USB device number 3 using xhci_hcd
>[    2.571916] audit: type=1130 audit(1559026338.629:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.579282] systemd-journald[294]: Received request to flush runtime journal from PID 1
>[    2.650367] usb 1-4: New USB device found, idVendor=5986, idProduct=210d, bcdDevice=53.15
>[    2.650371] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.650373] usb 1-4: Product: EasyCamera
>[    2.650374] usb 1-4: Manufacturer: SunplusIT Inc
>[    2.719696] audit: type=1130 audit(1559026338.776:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.754782] audit: type=1130 audit(1559026338.813:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.773845] usb 1-7: new full-speed USB device number 4 using xhci_hcd
>[    2.782814] ACPI: AC Adapter [ADP0] (off-line)
>[    2.850368] hidraw: raw HID events driver (C) Jiri Kosina
>[    2.851504] i801_smbus 0000:00:1f.4: SPD Write Disable is set
>[    2.851555] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
>[    2.852529] input: PC Speaker as /devices/platform/pcspkr/input/input3
>[    2.860366] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
>[    2.861575] Linux agpgart interface v0.103
>[    2.862125] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
>[    2.862658] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
>[    2.862660] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>[    2.862660] RAPL PMU: hw unit of domain package 2^-14 Joules
>[    2.862661] RAPL PMU: hw unit of domain dram 2^-14 Joules
>[    2.862662] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>[    2.862663] RAPL PMU: hw unit of domain psys 2^-14 Joules
>[    2.868159] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
>[    2.872857] idma64 idma64.0: Found Intel integrated DMA 64-bit
>[    2.880578] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
>[    2.888063] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
>[    2.895401] cryptd: max_cpu_qlen set to 1000
>[    2.898738] Adding 4194300k swap on /dev/nvme0n1p3.  Priority:-2 extents:1 across:4194300k SSFS
>[    2.913375] AVX2 version of gcm_enc/dec engaged.
>[    2.913377] AES CTR mode by8 optimization enabled
>[    2.914687] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
>[    2.914854] usb 1-7: New USB device found, idVendor=0cf3, idProduct=e300, bcdDevice= 0.01
>[    2.914856] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.933043] audit: type=1130 audit(1559026338.989:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.938797] cfg80211: Loading compiled-in X.509 certificates for regulatory database
>[    2.941102] battery: ACPI: Battery Slot [BAT0] (battery present)
>[    2.946959] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>[    2.949447] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
>[    2.949450] cfg80211: failed to load regulatory.db
>[    2.950598] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input4
>[    2.975101] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..
>[    2.989124] audit: type=1130 audit(1559026339.046:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-73052438\x2d1189\x2d4c9e\x2d8e07\x2d101e71680e41 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    2.999679] EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null)
>[    3.019632] audit: type=1130 audit(1559026339.076:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    3.026278] audit: type=1127 audit(1559026339.083:8): pid=476 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
>[    3.029890] audit: type=1130 audit(1559026339.086:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    3.036147] audit: type=1130 audit(1559026339.093:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[    3.041977] random: dbus-daemon: uninitialized urandom read (12 bytes read)
>[    3.057558] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
>[    3.057917] idma64 idma64.1: Found Intel integrated DMA 64-bit
>[    3.062393] i2c_hid i2c-MSFT0001:01: i2c-MSFT0001:01 supply vdd not found, using dummy regulator
>[    3.062439] i2c_hid i2c-MSFT0001:01: i2c-MSFT0001:01 supply vddl not found, using dummy regulator
>[    3.117549] iTCO_vendor_support: vendor-support=0
>[    3.123347] [drm:intel_pch_type [i915]] Found SunrisePoint LP PCH
>[    3.123402] [drm:i915_driver_load [i915]] WOPCM size: 1024KiB
>[    3.123480] [drm:intel_uc_init_early [i915]] enable_guc=0 (submission:no huc:no)
>[    3.123535] [drm:i915_driver_load [i915]] guc_log_level=0 (enabled:no, verbose:no, verbosity:0)
>[    3.123599] [drm:intel_power_domains_init [i915]] Allowed DC state mask 03
>[    3.124190] [drm:i915_ggtt_probe_hw [i915]] GGTT size = 4096M
>[    3.124249] [drm:i915_ggtt_probe_hw [i915]] GMADR size = 256M
>[    3.124305] [drm:i915_ggtt_probe_hw [i915]] DSM size = 64M
>[    3.124309] checking generic (c0000000 1fb0000) vs hw (2fc0000000 10000000)
>[    3.124313] i915 0000:00:02.0: vgaarb: deactivate vga console
>[    3.124401] [drm:i915_gem_init_stolen [i915]] GEN6_STOLEN_RESERVED = 3cf00047
>[    3.124460] [drm:i915_gem_init_stolen [i915]] Memory reserved for graphics device: 65536K, usable: 64512K
>[    3.124524] [drm:intel_gt_init_workarounds [i915]] Initialized 5 GT workarounds
>[    3.124654] [drm:intel_gvt_init [i915]] GVT-g is disabled by kernel params
>[    3.124721] [drm:intel_opregion_setup [i915]] graphic opregion physical addr: 0x2ff69018
>[    3.124843] [drm:intel_opregion_setup [i915]] ACPI OpRegion version 2.0.0
>[    3.124942] [drm:intel_opregion_setup [i915]] Public ACPI methods supported
>[    3.125033] [drm:intel_opregion_setup [i915]] SWSCI supported
>[    3.127492] [drm:intel_opregion_setup [i915]] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300583
>[    3.127571] [drm:intel_opregion_setup [i915]] ASLE supported
>[    3.127639] [drm:intel_opregion_setup [i915]] ASLE extension supported
>[    3.127707] [drm:intel_opregion_setup [i915]] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    3.127762] [drm:skl_dram_get_channel_info [i915]] (size:width:rank) L(8GB:X8:dual) S(0GB:X8:single)
>[    3.127814] [drm:skl_dram_get_channels_info [i915]] memory configuration is not Symmetric memory
>[    3.127882] [drm:i915_driver_load [i915]] DRAM bandwidth:19200000 KBps, total-channels: 1
>[    3.127934] [drm:i915_driver_load [i915]] DRAM rank: single rank 16GB-dimm:yes
>[    3.127935] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
>[    3.127941] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    3.127942] [drm] Driver supports precise vblank timestamp query.
>[    3.128034] [drm:intel_bios_init [i915]] Set default to SSC at 120000 kHz
>[    3.128110] [drm:intel_bios_init [i915]] VBT signature "$VBT SKYLAKE        ", BDB version 211
>[    3.128188] [drm:intel_bios_init [i915]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    3.128276] [drm:intel_bios_init [i915]] crt_ddc_bus_pin: 2
>[    3.128278] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
>[    3.128483] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    3.128725] input: MSFT0001:01 04F3:3095 Mouse as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-MSFT0001:01/0018:04F3:3095.0001/input/input5
>[    3.128821] input: MSFT0001:01 04F3:3095 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-MSFT0001:01/0018:04F3:3095.0001/input/input6
>[    3.128892] hid-generic 0018:04F3:3095.0001: input,hidraw0: I2C HID v1.00 Mouse [MSFT0001:01 04F3:3095] on i2c-MSFT0001:01
>[    3.129086] [drm:intel_opregion_get_panel_type [i915]] Ignoring OpRegion panel type (0)
>[    3.129153] [drm:intel_bios_init [i915]] Panel type: 2 (VBT)
>[    3.129218] [drm:intel_bios_init [i915]] DRRS supported mode is static
>[    3.129285] [drm:intel_bios_init [i915]] Found panel mode in BIOS VBT tables:
>[    3.129315] [drm:drm_mode_debug_printmodeline [drm]] Modeline "1024x768": 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
>[    3.129382] [drm:intel_bios_init [i915]] VBT initial LVDS value 300
>[    3.129451] [drm:intel_bios_init [i915]] VBT backlight PWM modulation frequency 900 Hz, active high, min brightness 0, level 255, controller 0
>[    3.129521] [drm:intel_bios_init [i915]] DRRS State Enabled:1
>[    3.129596] [drm:intel_bios_init [i915]] Skipping SDVO device mapping
>[    3.129672] [drm:intel_bios_init [i915]] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0 TCUSB:0 TBT:0
>[    3.129745] [drm:intel_bios_init [i915]] VBT HDMI level shift for port A: 0
>[    3.129819] [drm:intel_bios_init [i915]] Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 TCUSB:1 TBT:0
>[    3.129890] [drm:intel_bios_init [i915]] VBT HDMI level shift for port B: 8
>[    3.129958] [drm:intel_bios_init [i915]] Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0 TCUSB:1 TBT:0
>[    3.130027] [drm:intel_bios_init [i915]] VBT HDMI level shift for port C: 8
>[    3.130166] [drm:intel_dsm_detect [i915]] no _DSM method for intel device
>[    3.130231] [drm:i915_driver_load [i915]] rawclk rate: 24000 kHz
>[    3.130295] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[    3.130354] [drm:intel_power_well_enable [i915]] enabling power well 1
>[    3.130415] [drm:intel_power_well_enable [i915]] enabling MISC IO power well
>[    3.130487] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 675000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 3
>[    3.130567] [drm:intel_update_max_cdclk [i915]] Max CD clock rate: 675000 kHz
>[    3.130634] [drm:skl_init_cdclk [i915]] Max dotclock rate: 675000 kHz
>[    3.130711] [drm:intel_power_well_enable [i915]] enabling always-on
>[    3.130765] [drm:intel_power_well_enable [i915]] enabling DC off
>[    3.130827] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 00
>[    3.130885] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.130894] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    3.130951] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
>[    3.131011] [drm:intel_power_well_enable [i915]] enabling DDI B IO power well
>[    3.131064] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
>[    3.131124] [drm:intel_power_well_enable [i915]] enabling DDI D IO power well
>[    3.131183] [drm:intel_csr_ucode_init [i915]] Loading i915/kbl_dmc_ver1_04.bin
>[    3.131893] [drm:intel_fbc_init [i915]] Sanitized enable_fbc value: 1
>[    3.131968] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM0 latency 3 (3.0 usec)
>[    3.132017] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM1 latency 19 (19.0 usec)
>[    3.132066] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM2 latency 28 (28.0 usec)
>[    3.132113] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM3 latency 32 (32.0 usec)
>[    3.132158] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM4 latency 63 (63.0 usec)
>[    3.132208] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM5 latency 77 (77.0 usec)
>[    3.132268] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM6 latency 83 (83.0 usec)
>[    3.132314] [drm:intel_print_wm_latency [i915]] Gen9 Plane WM7 latency 99 (99.0 usec)
>[    3.132390] [drm:intel_modeset_init [i915]] 3 display pipes available.
>[    3.132573] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 675000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 3
>[    3.132952] [drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT)
>[    3.133021] [drm:intel_dp_init_connector [i915]] Adding eDP connector on port A
>[    3.133131] [drm:intel_pps_dump_state [i915]] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000
>[    3.133191] [drm:intel_pps_dump_state [i915]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
>[    3.133248] [drm:intel_dp_init_panel_power_sequencer [i915]] panel power up delay 200, power down delay 50, power cycle delay 600
>[    3.133304] [drm:intel_dp_init_panel_power_sequencer [i915]] backlight on delay 1, off delay 200
>[    3.133405] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    3.133486] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[    3.133589] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f
>[    3.134211] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 c1 00 00 01 c0 02 00 00 00 00 0a 00
>[    3.134620] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    3.135014] [drm:intel_dp_init_connector [i915]] eDP DPCD: 02 93 a6
>[    3.135414] [drm:intel_psr_init_dpcd [i915]] eDP panel supports PSR version 1
>[    3.139315] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    3.139338] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    3.139372] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    3.139483] [drm:intel_dp_init_connector [i915]] VBT doesn't support DRRS
>[    3.139586] [drm:intel_panel_setup_backlight [i915]] Connector eDP-1 backlight initialized, enabled, brightness 1666/1666
>[    3.139672] [drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (VBT)
>[    3.139742] [drm:intel_dp_init_connector [i915]] Adding DP connector on port B
>[    3.139822] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port B
>[    3.139888] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x5 for port B (VBT)
>[    3.139964] [drm:intel_bios_port_aux_ch [i915]] using AUX C for port C (VBT)
>[    3.140031] [drm:intel_dp_init_connector [i915]] Adding DP connector on port C
>[    3.140103] [drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on port C
>[    3.140170] [drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x4 for port C (VBT)
>[    3.140261] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:47:pipe A] hw state readout: enabled
>[    3.140340] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:65:pipe B] hw state readout: disabled
>[    3.140414] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe C] hw state readout: disabled
>[    3.140484] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:30:plane 1A] hw state readout: enabled, pipe A
>[    3.140577] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:37:plane 2A] hw state readout: disabled, pipe A
>[    3.140675] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:cursor A] hw state readout: disabled, pipe A
>[    3.140745] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:48:plane 1B] hw state readout: disabled, pipe B
>[    3.140819] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:plane 2B] hw state readout: disabled, pipe B
>[    3.140881] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:62:cursor B] hw state readout: disabled, pipe B
>[    3.140950] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 1C] hw state readout: disabled, pipe C
>[    3.141010] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 2C] hw state readout: disabled, pipe C
>[    3.141070] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:80:cursor C] hw state readout: disabled, pipe C
>[    3.141130] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000001, on 1
>[    3.141190] [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[    3.141248] [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[    3.141304] [drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
>[    3.141366] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:84:DDI A] hw state readout: enabled, pipe A
>[    3.141421] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:90:DDI B] hw state readout: disabled, pipe A
>[    3.141477] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:92:DP-MST A] hw state readout: disabled, pipe A
>[    3.141531] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:93:DP-MST B] hw state readout: disabled, pipe B
>[    3.141585] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DP-MST C] hw state readout: disabled, pipe C
>[    3.141641] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C] hw state readout: disabled, pipe A
>[    3.141695] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DP-MST A] hw state readout: disabled, pipe A
>[    3.141748] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DP-MST B] hw state readout: disabled, pipe B
>[    3.141803] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DP-MST C] hw state readout: disabled, pipe C
>[    3.141859] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:85:eDP-1] hw state readout: enabled
>[    3.141914] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:91:DP-1] hw state readout: disabled
>[    3.141969] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:98:HDMI-A-1] hw state readout: disabled
>[    3.142025] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:DP-2] hw state readout: disabled
>[    3.142079] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:HDMI-A-2] hw state readout: disabled
>[    3.142875] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
>[    3.148402] [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe A][setup_hw_state]
>[    3.148494] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
>[    3.148562] [drm:intel_dump_pipe_config [i915]] output format: RGB
>[    3.148636] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[    3.148702] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 6213395, gmch_n: 8388608, link_m: 517782, link_n: 524288, tu: 64
>[    3.148768] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    3.148831] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    3.148882] [drm:drm_mode_debug_printmodeline [drm]] Modeline "3840x2160": 60 533299 3840 3888 3920 4000 2160 2163 2168 2222 0x40 0xa
>[    3.148947] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    3.148972] [drm:drm_mode_debug_printmodeline [drm]] Modeline "3840x2160": 60 533299 3840 3888 3920 4000 2160 2163 2168 2222 0x40 0xa
>[    3.149042] [drm:intel_dump_pipe_config [i915]] crtc timings: 533299 3840 3888 3920 4000 2160 2163 2168 2222, type: 0x40 flags: 0xa
>[    3.149107] [drm:intel_dump_pipe_config [i915]] port clock: 540000, pipe src size: 3840x2160, pixel rate 533299
>[    3.149173] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[    3.149252] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.149313] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    3.149374] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0
>[    3.149434] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    3.149493] [drm:intel_dump_pipe_config [i915]] [PLANE:30:plane 1A] disabled, scaler_id = -1
>[    3.149553] [drm:intel_dump_pipe_config [i915]] [PLANE:37:plane 2A] disabled, scaler_id = -1
>[    3.149612] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor A] disabled, scaler_id = -1
>[    3.149672] [drm:intel_dump_pipe_config [i915]] [CRTC:65:pipe B][setup_hw_state]
>[    3.149731] [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
>[    3.149789] [drm:intel_dump_pipe_config [i915]] output format: Invalid
>[    3.149850] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[    3.149925] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    3.149982] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    3.150011] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.150070] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    3.150092] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.150153] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    3.150212] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[    3.150271] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[    3.150331] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.150389] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    3.150448] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[    3.150504] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    3.150630] [drm:intel_dump_pipe_config [i915]] [PLANE:48:plane 1B] disabled, scaler_id = -1
>[    3.150693] [drm:intel_dump_pipe_config [i915]] [PLANE:55:plane 2B] disabled, scaler_id = -1
>[    3.150751] [drm:intel_dump_pipe_config [i915]] [PLANE:62:cursor B] disabled, scaler_id = -1
>[    3.150811] [drm:intel_dump_pipe_config [i915]] [CRTC:83:pipe C][setup_hw_state]
>[    3.150873] [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
>[    3.150930] [drm:intel_dump_pipe_config [i915]] output format: Invalid
>[    3.150990] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[    3.151047] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    3.151105] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    3.151127] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.151187] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    3.151224] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    3.151291] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    3.151352] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[    3.151416] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: -1
>[    3.151476] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.151538] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    3.151598] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[    3.151660] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    3.151721] [drm:intel_dump_pipe_config [i915]] [PLANE:66:plane 1C] disabled, scaler_id = -1
>[    3.151783] [drm:intel_dump_pipe_config [i915]] [PLANE:73:plane 2C] disabled, scaler_id = -1
>[    3.151843] [drm:intel_dump_pipe_config [i915]] [PLANE:80:cursor C] disabled, scaler_id = -1
>[    3.151951] [drm:skylake_get_initial_plane_config [i915]] pipe A/plane 1A with fb: size=3840x2160@32, offset=0, pitch 15360, size 0x1fa4000
>[    3.152017] [drm:intel_plane_disable_noatomic [i915]] Disabling [PLANE:30:plane 1A] on [CRTC:47:pipe A]
>[    3.152124] [drm:skl_compute_wm [i915]] [PLANE:44:cursor A] ddb (0 - 0) -> (860 - 892)
>[    3.163513] [drm:i915_gem_init_ggtt [i915]] clearing unused GTT space: [1000, 100000000]
>[    3.163594] [drm:intel_engine_init_ctx_wa [i915]] Initialized 15 context workarounds
>[    3.163673] [drm:i915_gem_contexts_init [i915]] logical context support initialized
>[    3.163900] [drm:intel_engine_init_workarounds [i915]] Initialized 5 rcs0 workarounds
>[    3.163965] [drm:intel_engine_init_whitelist [i915]] Initialized 4 whitelist workarounds
>[    3.165024] [drm:intel_fbdev_init [i915]] pipe A not active or no fb, skipping
>[    3.165092] [drm:intel_fbdev_init [i915]] pipe B not active or no fb, skipping
>[    3.165159] [drm:intel_fbdev_init [i915]] pipe C not active or no fb, skipping
>[    3.165228] [drm:intel_fbdev_init [i915]] no active fbs found, not using BIOS config
>[    3.166086] [drm:intel_backlight_device_register [i915]] Connector eDP-1 backlight sysfs interface registered
>[    3.166158] [drm:intel_dp_connector_register [i915]] registering DPDDC-A bus for card0-eDP-1
>[    3.166432] [drm:intel_dp_connector_register [i915]] registering DPDDC-B bus for card0-DP-1
>[    3.166653] [drm:intel_dp_connector_register [i915]] registering DPDDC-C bus for card0-DP-2
>[    3.166657] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
>[    3.166877] [drm] Initialized i915 1.6.0 20190207 for 0000:00:02.0 on minor 0
>[    3.167137] [drm:intel_opregion_resume [i915]] 5 outputs detected
>[    3.171670] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    3.172054] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
>[    3.187498] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
>[    3.187571] [drm:intel_power_well_disable [i915]] disabling DDI D IO power well
>[    3.187584] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    3.187642] [drm:intel_power_well_disable [i915]] disabling DDI C IO power well
>[    3.187653] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:eDP-1]
>[    3.187709] [drm:intel_power_well_disable [i915]] disabling DDI B IO power well
>[    3.187781] [drm:intel_dp_detect [i915]] [CONNECTOR:85:eDP-1]
>[    3.187835] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.187847] i915 device info: pciid=0x5917 rev=0x07 platform=KABYLAKE gen=9
>[    3.187918] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    3.187921] i915 device info: is_mobile: no
>[    3.187992] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
>[    3.187994] i915 device info: is_lp: no
>[    3.188066] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
>[    3.188067] i915 device info: is_alpha_support: no
>[    3.188068] i915 device info: has_64bit_reloc: yes
>[    3.188070] i915 device info: gpu_reset_clobbers_display: no
>[    3.188071] i915 device info: has_reset_engine: yes
>[    3.188072] i915 device info: has_fpga_dbg: yes
>[    3.188074] i915 device info: has_guc: yes
>[    3.188075] i915 device info: has_guc_ct: no
>[    3.188076] i915 device info: has_l3_dpf: no
>[    3.188077] i915 device info: has_llc: yes
>[    3.188079] i915 device info: has_logical_ring_contexts: yes
>[    3.188080] i915 device info: has_logical_ring_elsq: no
>[    3.188081] i915 device info: has_logical_ring_preemption: yes
>[    3.188083] i915 device info: has_pooled_eu: no
>[    3.188084] i915 device info: has_rc6: yes
>[    3.188085] i915 device info: has_rc6p: no
>[    3.188086] i915 device info: has_runtime_pm: yes
>[    3.188087] i915 device info: has_snoop: no
>[    3.188089] i915 device info: has_coherent_ggtt: yes
>[    3.188090] i915 device info: unfenced_needs_alignment: no
>[    3.188091] i915 device info: hws_needs_physical: no
>[    3.188092] i915 device info: cursor_needs_physical: no
>[    3.188094] i915 device info: has_csr: yes
>[    3.188095] i915 device info: has_ddi: yes
>[    3.188096] i915 device info: has_dp_mst: yes
>[    3.188097] i915 device info: has_fbc: yes
>[    3.188099] i915 device info: has_gmch: no
>[    3.188100] i915 device info: has_hotplug: yes
>[    3.188101] i915 device info: has_ipc: yes
>[    3.188102] i915 device info: has_overlay: no
>[    3.188104] i915 device info: has_psr: yes
>[    3.188105] i915 device info: overlay_needs_physical: no
>[    3.188106] i915 device info: supports_tv: no
>[    3.188108] i915 device info: slice total: 1, mask=0001
>[    3.188109] i915 device info: subslice total: 3
>[    3.188111] i915 device info: slice0: 3 subslices, mask=0007
>[    3.188113] i915 device info: slice1: 0 subslices, mask=0000
>[    3.188114] i915 device info: slice2: 0 subslices, mask=0000
>[    3.188116] i915 device info: EU total: 24
>[    3.188117] i915 device info: EU per subslice: 8
>[    3.188118] i915 device info: has slice power gating: no
>[    3.188120] i915 device info: has subslice power gating: no
>[    3.188121] i915 device info: has EU power gating: yes
>[    3.188122] i915 device info: CS timestamp frequency: 12000 kHz
>[    3.188479] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    3.188857] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes
>[    3.189472] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:eDP-1] status updated from unknown to connected
>[    3.189504] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    3.189530] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    3.189552] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    3.189585] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:eDP-1] probed modes :
>[    3.189607] [drm:drm_mode_debug_printmodeline [drm]] Modeline "3840x2160": 60 533300 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0xa
>[    3.189617] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-1]
>[    3.189686] [drm:intel_dp_detect [i915]] [CONNECTOR:91:DP-1]
>[    3.189744] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.189815] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.189831] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-1] status updated from unknown to disconnected
>[    3.189840] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-1] disconnected
>[    3.189850] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:98:HDMI-A-1]
>[    3.189916] [drm:intel_hdmi_detect [i915]] [CONNECTOR:98:HDMI-A-1]
>[    3.231804] input: MSFT0001:01 04F3:3095 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-MSFT0001:01/0018:04F3:3095.0001/input/input9
>[    3.231844] kvm: disabled by bios
>[    3.231918] hid-multitouch 0018:04F3:3095.0001: input,hidraw0: I2C HID v1.00 Mouse [MSFT0001:01 04F3:3095] on i2c-MSFT0001:01
>[    3.242417] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    3.244957] Bluetooth: Core ver 2.22
>[    3.244978] NET: Registered protocol family 31
>[    3.244980] Bluetooth: HCI device and connection manager initialized
>[    3.244984] Bluetooth: HCI socket layer initialized
>[    3.244986] Bluetooth: L2CAP socket layer initialized
>[    3.244991] Bluetooth: SCO socket layer initialized
>[    3.267485] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.267581] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.267646] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    3.284031] kvm: disabled by bios
>[    3.285542] mousedev: PS/2 mouse device common for all mice
>[    3.293996] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    3.294072] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    3.296587] intel_rapl: Found RAPL domain package
>[    3.296589] intel_rapl: Found RAPL domain core
>[    3.296590] intel_rapl: Found RAPL domain uncore
>[    3.296592] intel_rapl: Found RAPL domain dram
>[    3.346534] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    3.370616] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    3.370627] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:98:HDMI-A-1] status updated from unknown to disconnected
>[    3.370639] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:98:HDMI-A-1] disconnected
>[    3.370656] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:DP-2]
>[    3.370734] [drm:intel_dp_detect [i915]] [CONNECTOR:104:DP-2]
>[    3.370787] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    3.370850] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    3.370866] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:DP-2] status updated from unknown to disconnected
>[    3.370874] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:DP-2] disconnected
>[    3.370883] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2]
>[    3.370936] [drm:intel_backlight_device_update_status [i915]] updating intel_backlight, brightness=1666/1666
>[    3.370983] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 1666
>[    3.371067] [drm:intel_hdmi_detect [i915]] [CONNECTOR:110:HDMI-A-2]
>[    3.423145] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
>[    3.425953] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.426020] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.426078] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    3.428709] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 17aa:0827
>[    3.428711] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 0
>[    3.428766] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    3.428830] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    3.429285] ath10k_pci 0000:01:00.0: firmware ver RM.4.4.1.c2-00057-QCARMSWP-1 api 6 features wowlan,ignore-otp,no-4addr-pad,raw-mode crc32 e061250a
>[    3.479099] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
>[    3.482253] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    3.482265] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2] status updated from unknown to disconnected
>[    3.482274] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2] disconnected
>[    3.482285] [drm:drm_setup_crtcs [drm_kms_helper]] connector 85 enabled? yes
>[    3.482293] [drm:drm_setup_crtcs [drm_kms_helper]] connector 91 enabled? no
>[    3.482300] [drm:drm_setup_crtcs [drm_kms_helper]] connector 98 enabled? no
>[    3.482307] [drm:drm_setup_crtcs [drm_kms_helper]] connector 104 enabled? no
>[    3.482314] [drm:drm_setup_crtcs [drm_kms_helper]] connector 110 enabled? no
>[    3.482388] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    3.482399] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 85
>[    3.482407] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 85 0
>[    3.482415] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 3840x2160
>[    3.482422] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 8192x8192 config
>[    3.482432] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 3840x2160 set on crtc 47 (0,0)
>[    3.482478] [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
>[    3.494106] [drm:intelfb_create [i915]] allocated 3840x2160 fb: 0x00040000
>[    3.494112] checking generic (c0000000 1fb0000) vs hw (2fc0000000 10000000)
>[    3.494213] fbcon: inteldrmfb (fb1) is primary device
>[    3.494215] fbcon: Remapping primary device, fb1, to tty 1-63
>[    3.494325] [drm:intel_atomic_check [i915]] [CONNECTOR:85:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36
>[    3.494395] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 24 pixel clock 533300KHz
>[    3.494456] [drm:intel_dp_compute_config [i915]] Force DSC en = 0
>[    3.494518] [drm:intel_dp_compute_config [i915]] DP lane count 4 clock 540000 bpp 24
>[    3.494582] [drm:intel_dp_compute_config [i915]] DP link rate required 1599900 available 2160000
>[    3.494658] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0
>[    3.494719] [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe A][fastset]
>[    3.494764] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
>[    3.494806] [drm:intel_dump_pipe_config [i915]] output format: RGB
>[    3.494848] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[    3.494890] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 6213395, gmch_n: 8388608, link_m: 517782, link_n: 524288, tu: 64
>[    3.494934] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[    3.495002] [drm:intel_dump_pipe_config [i915]] requested mode:
>[    3.495030] [drm:drm_mode_debug_printmodeline [drm]] Modeline "3840x2160": 60 533300 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0xa
>[    3.495096] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[    3.495118] [drm:drm_mode_debug_printmodeline [drm]] Modeline "3840x2160": 60 533300 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0xa
>[    3.495185] [drm:intel_dump_pipe_config [i915]] crtc timings: 533300 3840 3888 3920 4000 2160 2163 2168 2222, type: 0x48 flags: 0xa
>[    3.495266] [drm:intel_dump_pipe_config [i915]] port clock: 540000, pipe src size: 3840x2160, pixel rate 533300
>[    3.495334] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[    3.495397] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    3.495400] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id N/A crc32 4ed3569e
>[    3.495460] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[    3.495522] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0
>[    3.495572] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[    3.495614] [drm:intel_dump_pipe_config [i915]] [PLANE:30:plane 1A] disabled, scaler_id = -1
>[    3.495655] [drm:intel_dump_pipe_config [i915]] [PLANE:37:plane 2A] disabled, scaler_id = -1
>[    3.495695] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor A] disabled, scaler_id = -1
>[    3.495750] [drm:skl_compute_wm [i915]] [PLANE:30:plane 1A] ddb (0 - 0) -> (0 - 860)
>[    3.495821] [drm:intel_psr_enable_locked [i915]] Enabling PSR1
>[    3.496221] [drm:intel_ddi_update_pipe [i915]] Panel doesn't support DRRS
>[    3.496272] [drm:intel_fbc_enable [i915]] reserved 33177600 bytes of contiguous stolen space for FBC, threshold: 1
>[    3.496317] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
>[    3.514477] [drm:verify_connector_state.isra.72 [i915]] [CONNECTOR:85:eDP-1]
>[    3.514543] [drm:intel_atomic_commit_tail [i915]] [CRTC:47:pipe A]
>[    3.514635] [drm:verify_single_dpll_state.isra.73 [i915]] DPLL 0
>[    3.568728] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
>[    3.586882] ath10k_pci 0000:01:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
>[    3.661297] urandom_read: 2 callbacks suppressed
>[    3.661299] random: nm-online: uninitialized urandom read (16 bytes read)
>[    3.663601] ath: EEPROM regdomain: 0x6c
>[    3.663602] ath: EEPROM indicates we should expect a direct regpair map
>[    3.663605] ath: Country alpha2 being used: 00
>[    3.663606] ath: Regpair used: 0x6c
>[    3.679971] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
>[    3.684765] random: crng init done
>[    3.909197] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
>[    4.253093] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
>[    4.576840] media: Linux media interface: v0.10
>[    4.592056] usbcore: registered new interface driver btusb
>[    4.645269] videodev: Linux video capture interface: v2.00
>[    4.678488] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[    4.678492] Bluetooth: BNEP filters: protocol multicast
>[    4.678501] Bluetooth: BNEP socket layer initialized
>[    4.712163] uvcvideo: Found UVC 1.00 device EasyCamera (5986:210d)
>[    4.729144] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
>[    4.729146] uvcvideo 1-4:1.0: Entity type for entity Extension 3 was not initialized!
>[    4.729148] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
>[    4.729149] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
>[    4.729256] input: EasyCamera: EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input10
>[    4.729331] usbcore: registered new interface driver uvcvideo
>[    4.729332] USB Video Class driver (1.1.1)
>[    5.335759] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
>[    5.342630] Bridge firewalling registered
>[    5.540528] Initializing XFRM netlink socket
>[    5.744340] kauditd_printk_skb: 57 callbacks suppressed
>[    5.744347] audit: type=1325 audit(1559026341.803:68): table=nat family=2 entries=15
>[    5.748225] audit: type=1325 audit(1559026341.806:69): table=nat family=2 entries=14
>[    5.752480] audit: type=1325 audit(1559026341.809:70): table=filter family=2 entries=31
>[    5.756532] audit: type=1325 audit(1559026341.813:71): table=filter family=2 entries=30
>[    5.762135] audit: type=1325 audit(1559026341.819:72): table=filter family=2 entries=29
>[    5.768922] audit: type=1325 audit(1559026341.826:73): table=filter family=2 entries=28
>[    5.773069] audit: type=1325 audit(1559026341.829:74): table=filter family=2 entries=27
>[    5.777201] audit: type=1325 audit(1559026341.833:75): table=filter family=2 entries=26
>[    5.809489] audit: type=1325 audit(1559026341.866:76): table=nat family=2 entries=13
>[    5.813553] audit: type=1325 audit(1559026341.869:77): table=nat family=2 entries=14
>[    6.089161] br-e45a5f63020e: port 1(vethc0f248c) entered blocking state
>[    6.089167] br-e45a5f63020e: port 1(vethc0f248c) entered disabled state
>[    6.089477] device vethc0f248c entered promiscuous mode
>[    6.090336] br-e45a5f63020e: port 1(vethc0f248c) entered blocking state
>[    6.090340] br-e45a5f63020e: port 1(vethc0f248c) entered forwarding state
>[    6.090900] docker0: port 1(vethdaff461) entered blocking state
>[    6.090906] docker0: port 1(vethdaff461) entered disabled state
>[    6.091130] device vethdaff461 entered promiscuous mode
>[    6.091626] docker0: port 1(vethdaff461) entered blocking state
>[    6.091631] docker0: port 1(vethdaff461) entered forwarding state
>[    6.092243] IPv6: ADDRCONF(NETDEV_CHANGE): br-e45a5f63020e: link becomes ready
>[    6.092661] docker0: port 1(vethdaff461) entered disabled state
>[    6.093219] br-e45a5f63020e: port 1(vethc0f248c) entered disabled state
>[    6.113014] br-e45a5f63020e: port 2(vethea248c5) entered blocking state
>[    6.113131] br-e45a5f63020e: port 2(vethea248c5) entered disabled state
>[    6.113324] device vethea248c5 entered promiscuous mode
>[    6.113747] br-e45a5f63020e: port 2(vethea248c5) entered blocking state
>[    6.113753] br-e45a5f63020e: port 2(vethea248c5) entered forwarding state
>[    6.311785] docker0: port 1(vethdaff461) entered disabled state
>[    6.315151] device vethdaff461 left promiscuous mode
>[    6.315164] docker0: port 1(vethdaff461) entered disabled state
>[    6.318587] i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
>[    6.318685] Bluetooth: RFCOMM TTY layer initialized
>[    6.318691] Bluetooth: RFCOMM socket layer initialized
>[    6.318698] Bluetooth: RFCOMM ver 1.11
>[    6.330668] [drm:drm_fb_helper_hotplug_event.part.29 [drm_kms_helper]] 
>[    6.330682] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    6.330696] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:eDP-1]
>[    6.330820] [drm:intel_dp_detect [i915]] [CONNECTOR:85:eDP-1]
>[    6.330877] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    6.330924] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
>[    6.330970] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
>[    6.331394] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    6.331748] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes
>[    6.332265] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    6.332528] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    6.332550] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    6.332570] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    6.332608] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:eDP-1] probed modes :
>[    6.332626] [drm:drm_mode_debug_printmodeline [drm]] Modeline "3840x2160": 60 533300 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0xa
>[    6.332634] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-1]
>[    6.332675] [drm:intel_dp_detect [i915]] [CONNECTOR:91:DP-1]
>[    6.332690] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-1] disconnected
>[    6.332697] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:98:HDMI-A-1]
>[    6.332734] [drm:intel_hdmi_detect [i915]] [CONNECTOR:98:HDMI-A-1]
>[    6.383236] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    6.385353] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[    6.385357] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    6.385359] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[    6.385361] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[    6.385362] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[    6.385365] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
>[    6.385367] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
>[    6.407377] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    6.407469] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    6.407529] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    6.433962] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    6.434024] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    6.486525] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    6.510656] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    6.510684] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:98:HDMI-A-1] disconnected
>[    6.510703] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:DP-2]
>[    6.510798] [drm:intel_dp_detect [i915]] [CONNECTOR:104:DP-2]
>[    6.510834] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:DP-2] disconnected
>[    6.510855] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2]
>[    6.510932] [drm:intel_hdmi_detect [i915]] [CONNECTOR:110:HDMI-A-2]
>[    6.563345] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
>[    6.566158] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    6.566265] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    6.566337] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    6.569137] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    6.569214] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    6.581038] br-e45a5f63020e: port 2(vethea248c5) entered disabled state
>[    6.620698] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
>[    6.623492] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    6.623510] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2] disconnected
>[    6.623530] [drm:drm_setup_crtcs [drm_kms_helper]] connector 85 enabled? yes
>[    6.623547] [drm:drm_setup_crtcs [drm_kms_helper]] connector 91 enabled? no
>[    6.623565] [drm:drm_setup_crtcs [drm_kms_helper]] connector 98 enabled? no
>[    6.623583] [drm:drm_setup_crtcs [drm_kms_helper]] connector 104 enabled? no
>[    6.623594] [drm:drm_setup_crtcs [drm_kms_helper]] connector 110 enabled? no
>[    6.623692] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    6.623724] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 85
>[    6.623738] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 85 0
>[    6.623753] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 3840x2160
>[    6.623764] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 3840x2160 config
>[    6.623788] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 3840x2160 set on crtc 47 (0,0)
>[    6.656034] [drm:drm_fb_helper_hotplug_event.part.29 [drm_kms_helper]] 
>[    6.656051] [drm:drm_setup_crtcs [drm_kms_helper]] 
>[    6.656071] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:eDP-1]
>[    6.656170] [drm:intel_dp_detect [i915]] [CONNECTOR:85:eDP-1]
>[    6.656256] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    6.656331] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
>[    6.656405] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
>[    6.656843] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    6.658097] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes
>[    6.658772] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    6.658814] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    6.658849] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    6.658903] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:eDP-1] probed modes :
>[    6.658942] [drm:drm_mode_debug_printmodeline [drm]] Modeline "3840x2160": 60 533300 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0xa
>[    6.658973] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-1]
>[    6.659061] [drm:intel_dp_detect [i915]] [CONNECTOR:91:DP-1]
>[    6.659086] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-1] disconnected
>[    6.659101] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:98:HDMI-A-1]
>[    6.659176] [drm:intel_hdmi_detect [i915]] [CONNECTOR:98:HDMI-A-1]
>[    6.709922] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    6.734001] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    6.734122] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    6.734196] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    6.760649] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    6.760745] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    6.812631] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    6.837299] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    6.837319] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:98:HDMI-A-1] disconnected
>[    6.837338] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:DP-2]
>[    6.837426] [drm:intel_dp_detect [i915]] [CONNECTOR:104:DP-2]
>[    6.837478] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:DP-2] disconnected
>[    6.837493] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2]
>[    6.837565] [drm:intel_hdmi_detect [i915]] [CONNECTOR:110:HDMI-A-2]
>[    6.889856] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
>[    6.892668] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    6.892753] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    6.892825] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    6.895579] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    6.895658] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    6.945830] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
>[    6.948607] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    6.948625] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2] disconnected
>[    6.948644] [drm:drm_setup_crtcs [drm_kms_helper]] connector 85 enabled? yes
>[    6.948658] [drm:drm_setup_crtcs [drm_kms_helper]] connector 91 enabled? no
>[    6.948675] [drm:drm_setup_crtcs [drm_kms_helper]] connector 98 enabled? no
>[    6.948693] [drm:drm_setup_crtcs [drm_kms_helper]] connector 104 enabled? no
>[    6.948711] [drm:drm_setup_crtcs [drm_kms_helper]] connector 110 enabled? no
>[    6.948826] [drm:intel_fb_initial_config [i915]] Not using firmware configuration
>[    6.948850] [drm:drm_setup_crtcs [drm_kms_helper]] looking for cmdline mode on connector 85
>[    6.948871] [drm:drm_setup_crtcs [drm_kms_helper]] looking for preferred mode on connector 85 0
>[    6.948891] [drm:drm_setup_crtcs [drm_kms_helper]] found mode 3840x2160
>[    6.948912] [drm:drm_setup_crtcs [drm_kms_helper]] picking CRTCs for 3840x2160 config
>[    6.948938] [drm:drm_setup_crtcs [drm_kms_helper]] desired mode 3840x2160 set on crtc 47 (0,0)
>[    6.991678] eth0: renamed from vethdf5a843
>[    7.011311] IPv6: ADDRCONF(NETDEV_CHANGE): vethc0f248c: link becomes ready
>[    7.011409] br-e45a5f63020e: port 1(vethc0f248c) entered blocking state
>[    7.011413] br-e45a5f63020e: port 1(vethc0f248c) entered forwarding state
>[    7.048560] eth0: renamed from vethf18578e
>[    7.084710] IPv6: ADDRCONF(NETDEV_CHANGE): vethea248c5: link becomes ready
>[    7.084812] br-e45a5f63020e: port 2(vethea248c5) entered blocking state
>[    7.084816] br-e45a5f63020e: port 2(vethea248c5) entered forwarding state
>[    7.088598] [drm:drm_mode_addfb2 [drm]] [FB:113]
>[    7.089620] [drm:intel_framebuffer_init [i915]] No Y tiling for legacy addfb
>[    7.089703] [drm:drm_internal_framebuffer_create [drm]] could not create framebuffer
>[    7.089784] [drm:drm_mode_addfb2 [drm]] [FB:113]
>[    7.184917] [drm:drm_mode_addfb2 [drm]] [FB:113]
>[    7.445819] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    7.445856] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    7.445890] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[    7.445922] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    7.445954] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    7.445986] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[    7.446018] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[    7.446049] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[    7.446080] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[    7.447733] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
>[    7.447836] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
>[    7.447934] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
>[    7.448028] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
>[    7.448120] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
>[    7.448221] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
>[    7.448323] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17
>[    7.448414] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
>[    7.448609] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    7.893766] [drm:drm_mode_addfb2 [drm]] [FB:117]
>[    7.893966] [drm:drm_mode_setcrtc [drm]] [CRTC:47:pipe A]
>[    7.894013] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:85:eDP-1]
>[    8.300268] fuse init (API version 7.29)
>[    8.669240] [drm:drm_mode_addfb2 [drm]] [FB:119]
>[    9.098914] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:eDP-1]
>[    9.099024] [drm:intel_dp_detect [i915]] [CONNECTOR:85:eDP-1]
>[    9.099121] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    9.099206] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
>[    9.099288] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
>[    9.099744] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    9.100151] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes
>[    9.100985] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    9.101034] [drm:drm_add_edid_modes [drm]] ELD: no CEA Extension found
>[    9.101076] [drm:drm_add_display_info [drm]] non_desktop set to 0
>[    9.101139] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:85:eDP-1] probed modes :
>[    9.101178] [drm:drm_mode_debug_printmodeline [drm]] Modeline "3840x2160": 60 533300 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0xa
>[    9.102001] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-1]
>[    9.102098] [drm:intel_dp_detect [i915]] [CONNECTOR:91:DP-1]
>[    9.102160] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    9.102241] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    9.102271] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-1] disconnected
>[    9.102303] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:DP-2]
>[    9.102388] [drm:intel_dp_detect [i915]] [CONNECTOR:104:DP-2]
>[    9.102446] [drm:intel_power_well_enable [i915]] enabling power well 2
>[    9.102521] [drm:intel_power_well_disable [i915]] disabling power well 2
>[    9.102548] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:DP-2] disconnected
>[    9.102575] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:98:HDMI-A-1]
>[    9.102655] [drm:intel_hdmi_detect [i915]] [CONNECTOR:98:HDMI-A-1]
>[    9.154170] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    9.180666] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    9.180759] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    9.180841] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    9.207300] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[    9.207386] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    9.259284] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    9.283975] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    9.283997] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:98:HDMI-A-1] disconnected
>[    9.284052] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2]
>[    9.284143] [drm:intel_hdmi_detect [i915]] [CONNECTOR:110:HDMI-A-2]
>[    9.336658] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
>[    9.339453] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    9.339546] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    9.339630] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    9.342382] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[    9.342467] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    9.393132] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
>[    9.395919] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[    9.395941] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2] disconnected
>[   12.150983] [drm:edp_panel_vdd_off_sync [i915]] Turning eDP port A VDD off
>[   12.151138] [drm:edp_panel_vdd_off_sync [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007
>[   14.009173] kauditd_printk_skb: 48 callbacks suppressed
>[   14.009176] audit: type=1131 audit(1559026350.066:126): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   21.854829] [drm:intel_power_well_disable [i915]] disabling DC off
>[   21.854892] [drm:skl_enable_dc6 [i915]] Enabling DC6
>[   21.854950] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
>[   34.720372] audit: type=1131 audit(1559026370.776:127): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   44.478144] [drm:intel_power_well_enable [i915]] enabling DC off
>[   44.478431] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
>[   47.881402] [drm:intel_power_well_disable [i915]] disabling DC off
>[   47.881464] [drm:skl_enable_dc6 [i915]] Enabling DC6
>[   47.881523] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
>[   53.888717] [drm:intel_power_well_enable [i915]] enabling DC off
>[   53.888781] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
>[   54.759839] [drm:drm_mode_addfb2 [drm]] [FB:114]
>[   54.843308] audit: type=1006 audit(1559026390.899:128): pid=1575 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
>[   54.904177] audit: type=1130 audit(1559026390.963:129): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   54.924759] audit: type=1006 audit(1559026390.983:130): pid=1637 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
>[   55.026649] audit: type=1130 audit(1559026391.083:131): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   55.050550] audit: type=1112 audit(1559026391.106:132): pid=1575 uid=0 auid=1000 ses=2 msg='op=login id=1000 exe="/usr/bin/lightdm" hostname=scienter addr=? terminal=/dev/tty7 res=success'
>[   56.333705] audit: type=1130 audit(1559026392.389:133): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   56.427561] [drm:intel_power_well_enable [i915]] enabling power well 2
>[   56.440492] [drm:intel_power_well_disable [i915]] disabling power well 2
>[   56.543786] [drm:intel_power_well_enable [i915]] enabling power well 2
>[   56.550144] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[   56.550229] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[   56.550308] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[   56.550384] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[   56.550458] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[   56.550533] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[   56.550576] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[   56.550606] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[   56.550638] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[   59.031635] [drm:intel_power_well_disable [i915]] disabling power well 2
>[   59.791360] wlp1s0: authenticate with bc:ee:7b:34:56:48
>[   59.840682] wlp1s0: send auth to bc:ee:7b:34:56:48 (try 1/3)
>[   59.842381] wlp1s0: authenticated
>[   59.853892] wlp1s0: associate with bc:ee:7b:34:56:48 (try 1/3)
>[   59.858211] wlp1s0: RX AssocResp from bc:ee:7b:34:56:48 (capab=0x411 status=0 aid=3)
>[   59.861529] wlp1s0: associated
>[   59.928033] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
>[   60.023107] audit: type=1130 audit(1559026396.079:134): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   64.977494] audit: type=1131 audit(1559026401.036:135): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   65.002235] audit: type=1131 audit(1559026401.059:136): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@620 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   65.893937] [drm:drm_mode_addfb2 [drm]] [FB:114]
>[   66.250895] [drm:intel_power_well_enable [i915]] enabling power well 2
>[   66.264101] [drm:intel_power_well_disable [i915]] disabling power well 2
>[   70.011808] audit: type=1131 audit(1559026406.069:137): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   70.236873] audit: type=1130 audit(1559022566.130:138): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ntpdate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   70.236881] audit: type=1131 audit(1559022566.130:139): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ntpdate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[   77.096250] [drm:drm_mode_addfb2 [drm]] [FB:115]
>[   83.934538] [drm:intel_power_well_disable [i915]] disabling DC off
>[   83.934601] [drm:skl_enable_dc6 [i915]] Enabling DC6
>[   83.934665] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
>[   86.690022] [drm:drm_mode_addfb2 [drm]] [FB:115]
>[   86.690191] [drm:intel_power_well_enable [i915]] enabling DC off
>[   86.690249] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
>[   92.814724] [drm:intel_power_well_disable [i915]] disabling DC off
>[   92.814787] [drm:skl_enable_dc6 [i915]] Enabling DC6
>[   92.814849] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
>[   92.961124] [drm:intel_power_well_enable [i915]] enabling DC off
>[   92.961185] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
>[   94.551893] [drm:drm_mode_addfb2 [drm]] [FB:117]
>[  104.976609] [drm:drm_mode_addfb2 [drm]] [FB:117]
>[  117.801515] [drm:intel_power_well_disable [i915]] disabling DC off
>[  117.801584] [drm:skl_enable_dc6 [i915]] Enabling DC6
>[  117.801648] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
>[  120.303985] [drm:intel_power_well_enable [i915]] enabling DC off
>[  120.304047] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
>[  124.894751] [drm:intel_power_well_disable [i915]] disabling DC off
>[  124.894815] [drm:skl_enable_dc6 [i915]] Enabling DC6
>[  124.894872] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
>[  128.509059] [drm:intel_power_well_enable [i915]] enabling DC off
>[  128.509122] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
>[  128.625707] [drm:drm_mode_addfb2 [drm]] [FB:117]
>[  130.814508] [drm:intel_power_well_disable [i915]] disabling DC off
>[  130.814573] [drm:skl_enable_dc6 [i915]] Enabling DC6
>[  130.814630] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
>[  131.362211] [drm:intel_power_well_enable [i915]] enabling DC off
>[  131.362273] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
>[  136.911179] [drm:drm_mode_addfb2 [drm]] [FB:115]
>[  144.947895] [drm:intel_power_well_disable [i915]] disabling DC off
>[  144.947958] [drm:skl_enable_dc6 [i915]] Enabling DC6
>[  144.948019] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
>[  153.471263] [drm:intel_power_well_enable [i915]] enabling DC off
>[  153.471323] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
>[  155.184947] [drm:drm_mode_addfb2 [drm]] [FB:114]
>[  158.658006] PM: suspend entry (s2idle)
>[  158.658008] PM: Syncing filesystems ... done.
>[  158.931321] [drm:skl_compute_wm [i915]] [PLANE:30:plane 1A] ddb (0 - 860) -> (0 - 0)
>[  158.954209] [drm:skl_compute_wm [i915]] [PLANE:30:plane 1A] ddb (0 - 0) -> (0 - 860)
>[  159.090946] Freezing user space processes ... (elapsed 0.002 seconds) done.
>[  159.092984] OOM killer disabled.
>[  159.092986] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
>[  159.093882] printk: Suspending console(s) (use no_console_suspend to debug)
>[  159.197598] [drm:intel_power_well_disable [i915]] disabling DC off
>[  159.197642] [drm:skl_enable_dc6 [i915]] Enabling DC6
>[  159.197682] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
>[  159.198264] wlp1s0: deauthenticating from bc:ee:7b:34:56:48 by local choice (Reason: 3=DEAUTH_LEAVING)
>[  159.214026] [drm:intel_power_well_enable [i915]] enabling DC off
>[  159.214072] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
>[  159.214118] [drm:intel_power_well_enable [i915]] enabling power well 2
>[  159.226808] [drm:intel_power_well_disable [i915]] disabling power well 2
>[  159.226873] [drm:intel_power_well_disable [i915]] disabling DC off
>[  159.226920] [drm:skl_enable_dc6 [i915]] Enabling DC6
>[  159.226966] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
>[  159.228671] [drm:intel_power_well_enable [i915]] enabling DC off
>[  159.228976] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
>[  159.229026] [drm:intel_power_well_enable [i915]] enabling power well 2
>[  159.229078] [drm:intel_power_well_enable [i915]] enabling DDI B IO power well
>[  159.229122] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
>[  159.229166] [drm:intel_power_well_enable [i915]] enabling DDI D IO power well
>[  159.229311] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
>[  159.229377] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 0, actual 0
>[  159.229435] [drm:skl_compute_wm [i915]] [PLANE:30:plane 1A] ddb (0 - 860) -> (0 - 0)
>[  159.229475] [drm:skl_compute_wm [i915]] [PLANE:44:cursor A] ddb (860 - 892) -> (0 - 0)
>[  159.230288] [drm:intel_psr_disable_locked [i915]] Disabling PSR1
>[  159.236016] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[  159.236140] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f
>[  159.236383] [drm:intel_edp_backlight_off [i915]] 
>[  159.440950] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 0
>[  159.441036] [drm:lpt_disable_backlight [i915]] cpu backlight was enabled, disabling
>[  159.441129] [drm:intel_disable_pipe [i915]] disabling pipe A
>[  159.452411] [drm:intel_edp_panel_off.part.34 [i915]] Turn eDP port A panel power off
>[  159.452505] [drm:intel_edp_panel_off.part.34 [i915]] Wait for panel power off time
>[  159.452624] [drm:wait_panel_status [i915]] mask b0000000 value 00000000 status a0000003 control 00000000
>[  159.503060] [drm:wait_panel_status [i915]] Wait complete
>[  159.503157] [drm:__intel_fbc_disable [i915]] Disabling FBC on pipe A
>[  159.503241] [drm:intel_disable_shared_dpll [i915]] disable DPLL 0 (active 1, on? 1) for crtc 47
>[  159.503321] [drm:intel_disable_shared_dpll [i915]] disabling DPLL 0
>[  159.503410] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
>[  159.503506] [drm:intel_atomic_commit_tail [i915]] [ENCODER:84:DDI A]
>[  159.503585] [drm:intel_atomic_commit_tail [i915]] [ENCODER:90:DDI B]
>[  159.503660] [drm:intel_atomic_commit_tail [i915]] [ENCODER:92:DP-MST A]
>[  159.503735] [drm:intel_atomic_commit_tail [i915]] [ENCODER:93:DP-MST B]
>[  159.503808] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DP-MST C]
>[  159.503909] [drm:intel_atomic_commit_tail [i915]] [ENCODER:103:DDI C]
>[  159.503983] [drm:intel_atomic_commit_tail [i915]] [ENCODER:105:DP-MST A]
>[  159.504058] [drm:intel_atomic_commit_tail [i915]] [ENCODER:106:DP-MST B]
>[  159.504131] [drm:intel_atomic_commit_tail [i915]] [ENCODER:107:DP-MST C]
>[  159.504206] [drm:verify_connector_state.isra.72 [i915]] [CONNECTOR:85:eDP-1]
>[  159.504284] [drm:verify_single_dpll_state.isra.73 [i915]] DPLL 0
>[  159.504361] [drm:verify_single_dpll_state.isra.73 [i915]] DPLL 1
>[  159.504437] [drm:verify_single_dpll_state.isra.73 [i915]] DPLL 2
>[  159.504512] [drm:verify_single_dpll_state.isra.73 [i915]] DPLL 3
>[  159.504599] [drm:intel_atomic_commit_tail [i915]] [CRTC:47:pipe A]
>[  159.504664] [drm:intel_enable_sagv [i915]] Enabling SAGV
>[  159.504842] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010
>[  159.504929] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[  159.505010] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 10
>[  159.649129] [drm:intel_power_well_disable [i915]] disabling DDI D IO power well
>[  159.649181] [drm:intel_power_well_disable [i915]] disabling DDI C IO power well
>[  159.649228] [drm:intel_power_well_disable [i915]] disabling DDI B IO power well
>[  159.649273] [drm:intel_power_well_disable [i915]] disabling DDI A/E IO power well
>[  159.649318] [drm:intel_power_well_disable [i915]] disabling power well 2
>[  159.649363] [drm:intel_power_well_disable [i915]] disabling DC off
>[  159.649410] [drm:skl_enable_dc6 [i915]] Enabling DC6
>[  159.649456] [drm:gen9_set_dc_state [i915]] Setting DC state from 00 to 02
>[  159.649928] [drm:intel_power_well_disable [i915]] disabling always-on
>[  192.505512] [drm:intel_power_well_enable [i915]] enabling always-on
>[  192.505561] [drm:intel_power_well_enable [i915]] enabling DC off
>[  192.506020] [drm:gen9_set_dc_state [i915]] Setting DC state from 02 to 00
>[  192.506121] [drm:intel_power_well_enable [i915]] enabling power well 2
>[  192.506197] [drm:intel_power_well_enable [i915]] enabling DDI A/E IO power well
>[  192.506255] [drm:intel_power_well_enable [i915]] enabling DDI B IO power well
>[  192.506309] [drm:intel_power_well_enable [i915]] enabling DDI C IO power well
>[  192.506364] [drm:intel_power_well_enable [i915]] enabling DDI D IO power well
>[  192.508861] [drm:intel_dp_init_panel_power_sequencer_registers [i915]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[  192.511332] [drm:intel_dump_cdclk_state [i915]] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
>[  192.511474] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:47:pipe A] hw state readout: disabled
>[  192.511547] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:65:pipe B] hw state readout: disabled
>[  192.511618] [drm:intel_modeset_setup_hw_state [i915]] [CRTC:83:pipe C] hw state readout: disabled
>[  192.511687] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:30:plane 1A] hw state readout: disabled, pipe A
>[  192.511754] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:37:plane 2A] hw state readout: disabled, pipe A
>[  192.511820] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:44:cursor A] hw state readout: disabled, pipe A
>[  192.511886] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:48:plane 1B] hw state readout: disabled, pipe B
>[  192.511951] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:55:plane 2B] hw state readout: disabled, pipe B
>[  192.512017] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:62:cursor B] hw state readout: disabled, pipe B
>[  192.512081] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:66:plane 1C] hw state readout: disabled, pipe C
>[  192.512145] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:73:plane 2C] hw state readout: disabled, pipe C
>[  192.512210] [drm:intel_modeset_setup_hw_state [i915]] [PLANE:80:cursor C] hw state readout: disabled, pipe C
>[  192.512277] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 hw state readout: crtc_mask 0x00000000, on 1
>[  192.512341] [drm:intel_modeset_setup_hw_state [i915]] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[  192.512406] [drm:intel_modeset_setup_hw_state [i915]] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[  192.512470] [drm:intel_modeset_setup_hw_state [i915]] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
>[  192.512537] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:84:DDI A] hw state readout: disabled, pipe A
>[  192.512601] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:90:DDI B] hw state readout: disabled, pipe A
>[  192.512664] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:92:DP-MST A] hw state readout: disabled, pipe A
>[  192.512728] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:93:DP-MST B] hw state readout: disabled, pipe B
>[  192.512791] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:94:DP-MST C] hw state readout: disabled, pipe C
>[  192.512855] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:103:DDI C] hw state readout: disabled, pipe A
>[  192.512918] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:105:DP-MST A] hw state readout: disabled, pipe A
>[  192.512981] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:106:DP-MST B] hw state readout: disabled, pipe B
>[  192.513044] [drm:intel_modeset_setup_hw_state [i915]] [ENCODER:107:DP-MST C] hw state readout: disabled, pipe C
>[  192.513109] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:85:eDP-1] hw state readout: disabled
>[  192.513175] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:91:DP-1] hw state readout: disabled
>[  192.513241] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:98:HDMI-A-1] hw state readout: disabled
>[  192.513312] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:104:DP-2] hw state readout: disabled
>[  192.513386] [drm:intel_modeset_setup_hw_state [i915]] [CONNECTOR:110:HDMI-A-2] hw state readout: disabled
>[  192.526307] [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe A][setup_hw_state]
>[  192.526380] [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
>[  192.526447] [drm:intel_dump_pipe_config [i915]] output format: Invalid
>[  192.526531] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: A, pipe bpp: 0, dithering: 0
>[  192.526591] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  192.526650] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  192.526683] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  192.526742] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  192.526770] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  192.526831] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  192.526890] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[  192.526948] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[  192.527006] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  192.527063] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  192.527121] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[  192.527177] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  192.527235] [drm:intel_dump_pipe_config [i915]] [PLANE:30:plane 1A] disabled, scaler_id = -1
>[  192.527292] [drm:intel_dump_pipe_config [i915]] [PLANE:37:plane 2A] disabled, scaler_id = -1
>[  192.527350] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor A] disabled, scaler_id = -1
>[  192.527422] [drm:intel_dump_pipe_config [i915]] [CRTC:65:pipe B][setup_hw_state]
>[  192.527480] [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
>[  192.527538] [drm:intel_dump_pipe_config [i915]] output format: Invalid
>[  192.527595] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: B, pipe bpp: 0, dithering: 0
>[  192.527653] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  192.527709] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  192.527738] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  192.527795] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  192.527822] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  192.527882] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  192.527940] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[  192.527997] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[  192.528053] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  192.528110] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  192.528168] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[  192.528224] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  192.528281] [drm:intel_dump_pipe_config [i915]] [PLANE:48:plane 1B] disabled, scaler_id = -1
>[  192.528338] [drm:intel_dump_pipe_config [i915]] [PLANE:55:plane 2B] disabled, scaler_id = -1
>[  192.528394] [drm:intel_dump_pipe_config [i915]] [PLANE:62:cursor B] disabled, scaler_id = -1
>[  192.528451] [drm:intel_dump_pipe_config [i915]] [CRTC:83:pipe C][setup_hw_state]
>[  192.528508] [drm:intel_dump_pipe_config [i915]] output_types:  (0x0)
>[  192.528565] [drm:intel_dump_pipe_config [i915]] output format: Invalid
>[  192.528622] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: C, pipe bpp: 0, dithering: 0
>[  192.528678] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  192.528734] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  192.528762] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  192.528819] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  192.528846] [drm:drm_mode_debug_printmodeline [drm]] Modeline "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  192.528905] [drm:intel_dump_pipe_config [i915]] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  192.528963] [drm:intel_dump_pipe_config [i915]] port clock: 0, pipe src size: 0x0, pixel rate 0
>[  192.529019] [drm:intel_dump_pipe_config [i915]] num_scalers: 1, scaler_users: 0x0, scaler_id: -1
>[  192.529076] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  192.529133] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  192.529189] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x0, cfgcr1: 0x0, cfgcr2: 0x0
>[  192.529245] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  192.529302] [drm:intel_dump_pipe_config [i915]] [PLANE:66:plane 1C] disabled, scaler_id = -1
>[  192.529359] [drm:intel_dump_pipe_config [i915]] [PLANE:73:plane 2C] disabled, scaler_id = -1
>[  192.529416] [drm:intel_dump_pipe_config [i915]] [PLANE:80:cursor C] disabled, scaler_id = -1
>[  192.529477] [drm:intel_modeset_setup_hw_state [i915]] DPLL 0 enabled but not in use, disabling
>[  192.529611] [drm:intel_atomic_check [i915]] [CONNECTOR:85:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36
>[  192.529672] [drm:intel_dp_compute_config [i915]] DP link computation with max lane count 4 max rate 540000 max bpp 24 pixel clock 533300KHz
>[  192.529726] [drm:intel_dp_compute_config [i915]] Force DSC en = 0
>[  192.529780] [drm:intel_dp_compute_config [i915]] DP lane count 4 clock 540000 bpp 24
>[  192.529833] [drm:intel_dp_compute_config [i915]] DP link rate required 1599900 available 2160000
>[  192.529907] [drm:intel_atomic_check [i915]] hw max bpp: 24, pipe bpp: 24, dithering: 0
>[  192.529967] [drm:pipe_config_err [i915]] mismatch in cpu_transcoder (expected 0, found 3)
>[  192.530025] [drm:pipe_config_err [i915]] mismatch in lane_count (expected 0, found 4)
>[  192.530086] [drm:pipe_config_err [i915]] mismatch in dp_m_n (expected tu 0 gmch 0/0 link 0/0, or tu 0 gmch 0/0 link 0/0, found tu 64, gmch 6213395/8388608 link 1035565/1048576)
>[  192.530144] [drm:pipe_config_err [i915]] mismatch in output_types (expected 0x00000000, found 0x00000100)
>[  192.530201] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_hdisplay (expected 0, found 3840)
>[  192.530258] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_htotal (expected 0, found 4000)
>[  192.530314] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_hblank_start (expected 0, found 3840)
>[  192.530371] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_hblank_end (expected 0, found 4000)
>[  192.530428] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_hsync_start (expected 0, found 3888)
>[  192.530484] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_hsync_end (expected 0, found 3920)
>[  192.530542] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_vdisplay (expected 0, found 2160)
>[  192.530599] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_vtotal (expected 0, found 2222)
>[  192.530656] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_vblank_start (expected 0, found 2160)
>[  192.530723] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_vblank_end (expected 0, found 2222)
>[  192.530779] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_vsync_start (expected 0, found 2163)
>[  192.530836] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_vsync_end (expected 0, found 2168)
>[  192.530893] [drm:pipe_config_err [i915]] mismatch in pixel_multiplier (expected 0, found 1)
>[  192.530950] [drm:pipe_config_err [i915]] mismatch in output_format (expected 0, found 1)
>[  192.531007] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.flags (2) (expected 0, found 2)
>[  192.531065] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.flags (8) (expected 0, found 8)
>[  192.531123] [drm:pipe_config_err [i915]] mismatch in shared_dpll (expected           (null), found 0000000018966fd0)
>[  192.531180] [drm:pipe_config_err [i915]] mismatch in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000001)
>[  192.531239] [drm:pipe_config_err [i915]] mismatch in pipe_bpp (expected 0, found 24)
>[  192.531296] [drm:pipe_config_err [i915]] mismatch in base.adjusted_mode.crtc_clock (expected 0, found 533300)
>[  192.531352] [drm:pipe_config_err [i915]] mismatch in port_clock (expected 0, found 540000)
>[  192.531410] [drm:intel_dump_pipe_config [i915]] [CRTC:47:pipe A][modeset]
>[  192.531468] [drm:intel_dump_pipe_config [i915]] output_types: EDP (0x100)
>[  192.531526] [drm:intel_dump_pipe_config [i915]] output format: RGB
>[  192.531582] [drm:intel_dump_pipe_config [i915]] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[  192.531640] [drm:intel_dump_pipe_config [i915]] dp m_n: lanes: 4; gmch_m: 6213395, gmch_n: 8388608, link_m: 1035565, link_n: 1048576, tu: 64
>[  192.531698] [drm:intel_dump_pipe_config [i915]] audio: 0, infoframes: 0
>[  192.531755] [drm:intel_dump_pipe_config [i915]] requested mode:
>[  192.531784] [drm:drm_mode_debug_printmodeline [drm]] Modeline "3840x2160": 60 533300 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0xa
>[  192.531842] [drm:intel_dump_pipe_config [i915]] adjusted mode:
>[  192.531870] [drm:drm_mode_debug_printmodeline [drm]] Modeline "3840x2160": 60 533300 3840 3888 3920 4000 2160 2163 2168 2222 0x48 0xa
>[  192.531930] [drm:intel_dump_pipe_config [i915]] crtc timings: 533300 3840 3888 3920 4000 2160 2163 2168 2222, type: 0x48 flags: 0xa
>[  192.531987] [drm:intel_dump_pipe_config [i915]] port clock: 540000, pipe src size: 3840x2160, pixel rate 533300
>[  192.532045] [drm:intel_dump_pipe_config [i915]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[  192.532102] [drm:intel_dump_pipe_config [i915]] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  192.532159] [drm:intel_dump_pipe_config [i915]] ips: 0, double wide: 0
>[  192.532216] [drm:intel_dump_pipe_config [i915]] dpll_hw_state: ctrl1: 0x1, cfgcr1: 0x0, cfgcr2: 0x0
>[  192.532272] [drm:intel_dump_pipe_config [i915]] planes on this crtc
>[  192.532329] [drm:intel_dump_pipe_config [i915]] [PLANE:30:plane 1A] disabled, scaler_id = -1
>[  192.532386] [drm:intel_dump_pipe_config [i915]] [PLANE:37:plane 2A] disabled, scaler_id = -1
>[  192.532443] [drm:intel_dump_pipe_config [i915]] [PLANE:44:cursor A] disabled, scaler_id = -1
>[  192.532505] [drm:intel_atomic_check [i915]] New cdclk calculated to be logical 540000 kHz, actual 540000 kHz
>[  192.532562] [drm:intel_atomic_check [i915]] New voltage level calculated to be logical 2, actual 2
>[  192.532630] [drm:intel_find_shared_dpll [i915]] [CRTC:47:pipe A] allocated DPLL 0
>[  192.532687] [drm:intel_reference_shared_dpll [i915]] using DPLL 0 for pipe A
>[  192.532738] [drm:skl_compute_wm [i915]] [PLANE:30:plane 1A] ddb (0 - 0) -> (0 - 860)
>[  192.532777] [drm:skl_compute_wm [i915]] [PLANE:44:cursor A] ddb (0 - 0) -> (860 - 892)
>[  192.533058] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 540000 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 2
>[  192.533385] [drm:intel_atomic_commit_tail [i915]] [ENCODER:84:DDI A]
>[  192.533445] [drm:intel_atomic_commit_tail [i915]] [ENCODER:90:DDI B]
>[  192.533503] [drm:intel_atomic_commit_tail [i915]] [ENCODER:92:DP-MST A]
>[  192.533560] [drm:intel_atomic_commit_tail [i915]] [ENCODER:93:DP-MST B]
>[  192.533617] [drm:intel_atomic_commit_tail [i915]] [ENCODER:94:DP-MST C]
>[  192.533674] [drm:intel_atomic_commit_tail [i915]] [ENCODER:103:DDI C]
>[  192.533732] [drm:intel_atomic_commit_tail [i915]] [ENCODER:105:DP-MST A]
>[  192.533789] [drm:intel_atomic_commit_tail [i915]] [ENCODER:106:DP-MST B]
>[  192.533846] [drm:intel_atomic_commit_tail [i915]] [ENCODER:107:DP-MST C]
>[  192.533904] [drm:verify_connector_state.isra.72 [i915]] [CONNECTOR:91:DP-1]
>[  192.533964] [drm:verify_connector_state.isra.72 [i915]] [CONNECTOR:98:HDMI-A-1]
>[  192.534024] [drm:verify_connector_state.isra.72 [i915]] [CONNECTOR:104:DP-2]
>[  192.534097] [drm:verify_connector_state.isra.72 [i915]] [CONNECTOR:110:HDMI-A-2]
>[  192.534157] [drm:verify_single_dpll_state.isra.73 [i915]] DPLL 0
>[  192.534216] [drm:verify_single_dpll_state.isra.73 [i915]] DPLL 1
>[  192.534274] [drm:verify_single_dpll_state.isra.73 [i915]] DPLL 2
>[  192.534332] [drm:verify_single_dpll_state.isra.73 [i915]] DPLL 3
>[  192.534394] [drm:intel_enable_shared_dpll [i915]] enable DPLL 0 (active 1, on? 0) for crtc 47
>[  192.534451] [drm:intel_enable_shared_dpll [i915]] enabling DPLL 0
>[  192.534511] [drm:edp_panel_on [i915]] Turn eDP port A panel power on
>[  192.534572] [drm:wait_panel_power_cycle [i915]] Wait for panel power cycle
>[  192.534681] [drm:wait_panel_status [i915]] mask b800000f value 00000000 status 00000000 control 00000000
>[  192.534741] [drm:wait_panel_status [i915]] Wait complete
>[  192.534815] [drm:edp_panel_on [i915]] Wait for panel power on
>[  192.534920] [drm:wait_panel_status [i915]] mask b000000f value 80000008 status 9000000a control 00000003
>[  192.577095] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010
>[  192.577174] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - long
>[  192.577249] [drm:intel_hpd_irq_handler [i915]] Received HPD interrupt on PIN 4 - cnt: 20
>[  192.577344] [drm:intel_dp_hpd_pulse [i915]] ignoring long hpd on eDP port A
>[  192.704475] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
>[  192.726542] nvme nvme0: 8/0/0 default/read/poll queues
>[  192.737000] [drm:wait_panel_status [i915]] Wait complete
>[  192.737087] [drm:edp_panel_vdd_on [i915]] Turning eDP port A VDD on
>[  192.737189] [drm:edp_panel_vdd_on [i915]] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b
>[  192.738013] [drm:intel_dp_start_link_train [i915]] Using LINK_BW_SET value 14
>[  192.738398] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 00000000
>[  192.738448] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[  192.738497] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 0
>[  192.738547] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS1
>[  192.739235] [drm:intel_dp_start_link_train [i915]] clock recovery OK
>[  192.739283] [drm:intel_dp_program_link_training_pattern [i915]] Using DP training pattern TPS3
>[  192.740273] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 01000000
>[  192.740321] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[  192.740369] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1
>[  192.741348] [drm:intel_dp_set_signal_levels [i915]] Using signal levels 01000000
>[  192.741396] [drm:intel_dp_set_signal_levels [i915]] Using vswing level 0
>[  192.741444] [drm:intel_dp_set_signal_levels [i915]] Using pre-emphasis level 1
>[  192.742422] [drm:intel_dp_start_link_train [i915]] Channel EQ done. DP Training successful
>[  192.742473] [drm:intel_dp_start_link_train [i915]] [CONNECTOR:85:eDP-1] Link Training Passed at Link Rate = 540000, Lane count = 4
>[  192.742799] [drm:intel_enable_pipe [i915]] enabling pipe A
>[  192.742871] [drm:intel_edp_backlight_on [i915]] 
>[  192.742918] [drm:intel_panel_enable_backlight [i915]] pipe A
>[  192.743017] [drm:intel_panel_actually_set_backlight [i915]] set backlight PWM = 1666
>[  192.743107] [drm:intel_psr_enable_locked [i915]] Enabling PSR1
>[  192.743476] [drm:intel_enable_ddi [i915]] Panel doesn't support DRRS
>[  192.744781] [drm:intel_fbc_enable [i915]] reserved 33177600 bytes of contiguous stolen space for FBC, threshold: 1
>[  192.744843] [drm:intel_fbc_enable [i915]] Enabling FBC on pipe A
>[  192.759740] [drm:verify_connector_state.isra.72 [i915]] [CONNECTOR:85:eDP-1]
>[  192.759821] [drm:intel_atomic_commit_tail [i915]] [CRTC:47:pipe A]
>[  192.759910] [drm:verify_single_dpll_state.isra.73 [i915]] DPLL 0
>[  192.759979] [drm:intel_atomic_commit_tail [i915]] [CRTC:65:pipe B]
>[  192.760047] [drm:intel_atomic_commit_tail [i915]] [CRTC:83:pipe C]
>[  192.760259] [drm:intel_dp_detect [i915]] [CONNECTOR:85:eDP-1]
>[  192.760322] [drm:intel_dp_print_rates [i915]] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[  192.760381] [drm:intel_dp_print_rates [i915]] sink rates: 162000, 270000, 540000
>[  192.760439] [drm:intel_dp_print_rates [i915]] common rates: 162000, 270000, 540000
>[  192.760566] [drm:intel_opregion_resume [i915]] 5 outputs detected
>[  192.760928] [drm:drm_dp_read_desc [drm_kms_helper]] DP sink: OUI 38-ec-11 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[  192.761308] [drm:intel_dp_detect [i915]] MST support? port A: no, sink: no, modparam: yes
>[  192.761966] [drm:intel_power_well_disable [i915]] disabling DDI D IO power well
>[  192.762114] [drm:intel_power_well_disable [i915]] disabling DDI C IO power well
>[  192.762156] [drm:intel_power_well_disable [i915]] disabling DDI B IO power well
>[  192.762198] [drm:intel_power_well_disable [i915]] disabling power well 2
>[  192.762232] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:85:eDP-1] status updated from connected to connected
>[  192.762426] [drm:intel_power_well_enable [i915]] enabling power well 2
>[  192.775608] [drm:intel_power_well_disable [i915]] disabling power well 2
>[  192.775734] [drm:intel_power_well_enable [i915]] enabling power well 2
>[  192.776288] [drm:intel_dp_detect [i915]] [CONNECTOR:91:DP-1]
>[  192.776309] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:91:DP-1] status updated from disconnected to disconnected
>[  192.776344] [drm:intel_hdmi_detect [i915]] [CONNECTOR:98:HDMI-A-1]
>[  192.792058] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010, long 0x00000000
>[  192.792100] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short
>[  192.792181] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short
>[  192.792674] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 c1 00 00 01 c0 02 00 00 00 00 0a 00
>[  192.826945] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[  192.850888] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[  192.850936] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[  192.850979] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[  192.855712] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010, long 0x00000000
>[  192.855772] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short
>[  192.855899] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short
>[  192.856605] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 c1 00 00 01 c0 02 00 00 00 00 0a 00
>[  192.877509] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[  192.877562] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[  192.905076] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010, long 0x00000000
>[  192.905148] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short
>[  192.905280] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short
>[  192.905815] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 c1 00 00 01 c0 02 00 00 00 00 0a 00
>[  192.930579] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[  192.957497] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[  192.957513] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:98:HDMI-A-1] status updated from disconnected to disconnected
>[  192.957583] [drm:intel_dp_detect [i915]] [CONNECTOR:104:DP-2]
>[  192.957613] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:104:DP-2] status updated from disconnected to disconnected
>[  192.957676] [drm:intel_hdmi_detect [i915]] [CONNECTOR:110:HDMI-A-2]
>[  193.010565] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
>[  193.013971] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[  193.014035] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[  193.014103] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[  193.017452] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[  193.017512] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[  193.067702] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
>[  193.071077] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[  193.071094] [drm:drm_helper_hpd_irq_event [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2] status updated from disconnected to disconnected
>[  193.785321] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[  193.785397] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[  193.785467] [drm:i915_audio_component_get_eld [i915]] Not valid for port B
>[  193.785536] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[  193.785603] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[  193.785670] [drm:i915_audio_component_get_eld [i915]] Not valid for port C
>[  193.785737] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[  193.785803] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[  193.785870] [drm:i915_audio_component_get_eld [i915]] Not valid for port D
>[  193.787426] OOM killer enabled.
>[  193.787427] Restarting tasks ... done.
>[  193.885050] PM: suspend exit
>[  193.890527] audit: type=1130 audit(1559022690.138:140): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[  193.890535] audit: type=1131 audit(1559022690.138:141): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-suspend comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[  193.896881] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010, long 0x00000000
>[  193.896998] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short
>[  193.897145] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short
>[  193.897774] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 c1 00 00 01 c0 02 00 00 00 00 0a 00
>[  193.923836] [drm:drm_mode_setcrtc [drm]] [CRTC:47:pipe A]
>[  193.923881] [drm:drm_mode_setcrtc [drm]] [CONNECTOR:85:eDP-1]
>[  193.957909] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-1]
>[  193.958027] [drm:intel_dp_detect [i915]] [CONNECTOR:91:DP-1]
>[  193.958067] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:91:DP-1] disconnected
>[  193.958112] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:DP-2]
>[  193.958225] [drm:intel_dp_detect [i915]] [CONNECTOR:104:DP-2]
>[  193.958257] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:104:DP-2] disconnected
>[  193.958290] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:98:HDMI-A-1]
>[  193.958392] [drm:intel_hdmi_detect [i915]] [CONNECTOR:98:HDMI-A-1]
>[  193.959473] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010, long 0x00000000
>[  193.959593] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short
>[  193.959747] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short
>[  193.960338] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 c1 00 00 01 c0 02 00 00 00 00 0a 00
>[  193.986425] audit: type=1130 audit(1559022690.234:142): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
>[  194.010503] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[  194.011567] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010, long 0x00000000
>[  194.011655] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short
>[  194.011789] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short
>[  194.012480] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 c1 00 00 01 c0 02 00 00 00 00 0a 00
>[  194.037499] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[  194.037566] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[  194.037629] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[  194.064183] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpb
>[  194.064240] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[  194.116933] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[  194.140792] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[  194.140807] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:98:HDMI-A-1] disconnected
>[  194.140850] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2]
>[  194.140915] [drm:intel_hdmi_detect [i915]] [CONNECTOR:110:HDMI-A-2]
>[  194.193799] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
>[  194.196589] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[  194.196664] [drm:intel_hdmi_set_edid [i915]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[  194.196731] [drm:intel_gmbus_force_bit [i915]] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[  194.199458] [drm:drm_do_probe_ddc_edid [drm]] drm: skipping non-existent adapter i915 gmbus dpc
>[  194.199526] [drm:intel_gmbus_force_bit [i915]] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[  194.250776] [drm:do_gmbus_xfer [i915]] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
>[  194.253843] [drm:drm_dp_dual_mode_detect [drm_kms_helper]] DP dual mode HDMI ID:  (err -6)
>[  194.253862] [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:110:HDMI-A-2] disconnected
>[  194.312293] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
>[  195.034709] [drm:intel_power_well_disable [i915]] disabling power well 2
>[  195.759933] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010, long 0x00000000
>[  195.760022] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short
>[  195.760214] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short
>[  195.760807] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 c1 00 00 01 c0 02 00 00 00 00 0a 00
>[  196.157634] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010, long 0x00000000
>[  196.157734] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short
>[  196.157925] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short
>[  196.158541] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 c1 00 00 01 c0 02 00 00 00 00 0a 00
>[  196.203856] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010, long 0x00000000
>[  196.203955] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short
>[  196.204132] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short
>[  196.204695] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 c1 00 00 01 c0 02 00 00 00 00 0a 00
>[  197.189767] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010, long 0x00000000
>[  197.189865] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short
>[  197.190023] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short
>[  197.190646] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 c1 00 00 01 c0 02 00 00 00 00 0a 00
>[  197.525863] [drm:gen8_de_irq_handler [i915]] hotplug event received, stat 0x01000000, dig 0x11101010, pins 0x00000010, long 0x00000000
>[  197.525951] [drm:intel_hpd_irq_handler [i915]] digital hpd port A - short
>[  197.526159] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on port A - short
>[  197.526762] [drm:intel_dp_read_dpcd [i915]] DPCD: 12 14 c4 c1 00 00 01 c0 02 00 00 00 00 0a 00

Actions: View

Attachments on bug 108132: 141835 | 141867 | 141868 | 141902 | 141905 | 141906 | 141943 | 141944 | 141947 | 142004 | 142392 | 142399 | 144358 | 144365

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.