Attachment 144489 Details for Bug 110868 – full dmesg output with drm.debug=0xe

full dmesg output with drm.debug=0xe

dmesg.bad.txt (text/plain), 96.76 KB, created by Serge Belyshev on 2019-06-09 23:59:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Serge Belyshev

Created: 2019-06-09 23:59:28 UTC

Size: 96.76 KB

patch

obsolete

>[    0.000000] Linux version 5.2.0-rc3-00948-g999689d568a8-dirty (ssb@mi) (gcc version 9.1.1 20190609 [gcc-9-branch revision 272088]) #464 SMP Mon Jun 10 01:51:21 MSK 2019
>[    0.000000] Command line: BOOT_IMAGE=/boot/bzImage.test~ root=/dev/sda1 ro rootfstype=ext4 rootdir=/amd64 net.ifnames=0 drm.debug=0xe
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
>[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
>[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
>[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
>[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
>[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007569dfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007569e000-0x000000007569efff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007569f000-0x00000000756c8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000756c9000-0x0000000075778fff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000075779000-0x0000000076078fff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000076079000-0x000000008c28dfff] usable
>[    0.000000] BIOS-e820: [mem 0x000000008c28e000-0x000000008cc7dfff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000008cc7e000-0x000000008ce7dfff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000008ce7e000-0x000000008cefdfff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000008cefe000-0x000000008cefefff] usable
>[    0.000000] BIOS-e820: [mem 0x000000008ceff000-0x000000008fffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000016effffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.8 present.
>[    0.000000] DMI: Timi TM1612/TM1612, BIOS A04 08/06/2016
>[    0.000000] tsc: Detected 1500.000 MHz processor
>[    0.003301] tsc: Detected 1512.000 MHz TSC
>[    0.003301] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.003305] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.003321] last_pfn = 0x16f000 max_arch_pfn = 0x400000000
>[    0.003326] MTRR default type: uncachable
>[    0.003327] MTRR fixed ranges enabled:
>[    0.003329]   00000-9FFFF write-back
>[    0.003331]   A0000-BFFFF uncachable
>[    0.003332]   C0000-FFFFF write-protect
>[    0.003333] MTRR variable ranges enabled:
>[    0.003336]   0 base 0000000000 mask 7E00000000 write-back
>[    0.003338]   1 base 008CEFF000 mask 7FFFFFF000 uncachable
>[    0.003340]   2 base 008CF00000 mask 7FFFF00000 uncachable
>[    0.003341]   3 base 008D000000 mask 7FFF000000 uncachable
>[    0.003342]   4 base 008E000000 mask 7FFE000000 uncachable
>[    0.003343]   5 base 0090000000 mask 7FF0000000 uncachable
>[    0.003345]   6 base 00A0000000 mask 7FE0000000 uncachable
>[    0.003346]   7 base 00C0000000 mask 7FC0000000 uncachable
>[    0.003347]   8 disabled
>[    0.003348]   9 disabled
>[    0.005630] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
>[    0.006327] e820: update [mem 0x8ceff000-0xffffffff] usable ==> reserved
>[    0.006332] last_pfn = 0x8ceff max_arch_pfn = 0x400000000
>[    0.006349] Using GB pages for direct mapping
>[    0.006353] BRK [0x02801000, 0x02801fff] PGTABLE
>[    0.006357] BRK [0x02802000, 0x02802fff] PGTABLE
>[    0.006359] BRK [0x02803000, 0x02803fff] PGTABLE
>[    0.006451] BRK [0x02804000, 0x02804fff] PGTABLE
>[    0.007101] BRK [0x02805000, 0x02805fff] PGTABLE
>[    0.007177] BRK [0x02806000, 0x02806fff] PGTABLE
>[    0.007715] ACPI: Early table checksum verification disabled
>[    0.007835] ACPI: RSDP 0x00000000000FE020 000024 (v02 XMCC  )
>[    0.007842] ACPI: XSDT 0x000000008CEC0188 00010C (v01 XMCC   XMCC1501 00000000      01000013)
>[    0.007853] ACPI: FACP 0x000000008CEE5000 0000F4 (v05 XMCC   XMCC1501 00000000 ACPI 00040000)
>[    0.007863] ACPI: DSDT 0x000000008CEC2000 01E131 (v02 XMCC   XMCC1501 00000000 ACPI 00040000)
>[    0.007869] ACPI: FACS 0x000000008CE4E000 000040
>[    0.007874] ACPI: TCPA 0x000000008CEFC000 000032 (v02 XMCC   XMCC1501 00000000 ACPI 00040000)
>[    0.007879] ACPI: UEFI 0x000000008CEFB000 000236 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
>[    0.007884] ACPI: UEFI 0x000000008CEFA000 000042 (v01 XMCC   XMCC1501 00000002 ACPI 00040000)
>[    0.007889] ACPI: SSDT 0x000000008CEF9000 0004B7 (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
>[    0.007894] ACPI: SSDT 0x000000008CEF8000 00004B (v02 XMCC   XMCC1501 00003000 ACPI 00040000)
>[    0.007899] ACPI: TPM2 0x000000008CEF7000 000034 (v03 XMCC   XMCC1501 00000000 ACPI 00040000)
>[    0.007905] ACPI: MSDM 0x000000008CEF6000 000055 (v03 XMCC   XMCC1501 00000001 ACPI 00040000)
>[    0.007909] ACPI: SSDT 0x000000008CEF0000 0052EE (v02 XMCC   XMCC1501 00003000 ACPI 00040000)
>[    0.007915] ACPI: SSDT 0x000000008CEEC000 003377 (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
>[    0.007920] ACPI: DBGP 0x000000008CEEB000 000034 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
>[    0.007925] ACPI: DBG2 0x000000008CEEA000 000054 (v00 XMCC   XMCC1501 00000000 ACPI 00040000)
>[    0.007930] ACPI: ASF! 0x000000008CEE9000 0000A5 (v32 XMCC   XMCC1501 00000001 ACPI 00040000)
>[    0.007935] ACPI: ASPT 0x000000008CEE8000 000034 (v07 XMCC   XMCC1501 00000001 ACPI 00040000)
>[    0.007940] ACPI: BOOT 0x000000008CEE7000 000028 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
>[    0.007945] ACPI: DBGP 0x000000008CEE6000 000034 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
>[    0.007950] ACPI: HPET 0x000000008CEE4000 000038 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
>[    0.007955] ACPI: LPIT 0x000000008CEE3000 000094 (v01 XMCC   XMCC1501 00000000 ACPI 00040000)
>[    0.007960] ACPI: APIC 0x000000008CEE2000 0000BC (v03 XMCC   XMCC1501 00000001 ACPI 00040000)
>[    0.007965] ACPI: MCFG 0x000000008CEE1000 00003C (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
>[    0.007970] ACPI: SSDT 0x000000008CEC1000 0002D4 (v01 XMCC   XMCC1501 00000000 ACPI 00040000)
>[    0.007975] ACPI: SSDT 0x000000008CEBD000 002BAE (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
>[    0.007980] ACPI: SSDT 0x000000008CEBC000 0001DD (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
>[    0.007985] ACPI: SSDT 0x000000008CEBB000 00019A (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
>[    0.007990] ACPI: SSDT 0x000000008CEBA000 000B49 (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
>[    0.007995] ACPI: SSDT 0x000000008CEB9000 0004A3 (v02 XMCC   XMCC1501 00001000 ACPI 00040000)
>[    0.008000] ACPI: SSDT 0x000000008CEB8000 000E73 (v02 XMCC   XMCC1501 00003000 ACPI 00040000)
>[    0.008005] ACPI: DMAR 0x000000008CEB7000 0000F0 (v01 XMCC   XMCC1501 00000001 ACPI 00040000)
>[    0.008010] ACPI: FPDT 0x000000008CEB6000 000044 (v01 XMCC   XMCC1501 00000002 ACPI 00040000)
>[    0.008024] ACPI: Local APIC address 0xfee00000
>[    0.008253] Zone ranges:
>[    0.008255]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>[    0.008259]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>[    0.008261]   Normal   [mem 0x0000000100000000-0x000000016effffff]
>[    0.008263] Movable zone start for each node
>[    0.008265] Early memory node ranges
>[    0.008267]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
>[    0.008269]   node   0: [mem 0x0000000000100000-0x000000007569dfff]
>[    0.008271]   node   0: [mem 0x00000000756c9000-0x0000000075778fff]
>[    0.008273]   node   0: [mem 0x0000000076079000-0x000000008c28dfff]
>[    0.008274]   node   0: [mem 0x000000008cefe000-0x000000008cefefff]
>[    0.008276]   node   0: [mem 0x0000000100000000-0x000000016effffff]
>[    0.008564] Zeroed struct page in unavailable ranges: 18175 pages
>[    0.008566] Initmem setup node 0 [mem 0x0000000000001000-0x000000016effffff]
>[    0.008570] On node 0 totalpages: 1026305
>[    0.008573]   DMA zone: 64 pages used for memmap
>[    0.008574]   DMA zone: 21 pages reserved
>[    0.008575]   DMA zone: 3997 pages, LIFO batch:0
>[    0.008646]   DMA32 zone: 8870 pages used for memmap
>[    0.008648]   DMA32 zone: 567652 pages, LIFO batch:63
>[    0.022106]   Normal zone: 7104 pages used for memmap
>[    0.022107]   Normal zone: 454656 pages, LIFO batch:63
>[    0.029069] Reserving Intel graphics memory at [mem 0x8e000000-0x8fffffff]
>[    0.029391] ACPI: PM-Timer IO Port: 0x1808
>[    0.029394] ACPI: Local APIC address 0xfee00000
>[    0.029403] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.029405] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>[    0.029407] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>[    0.029408] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>[    0.029410] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>[    0.029411] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>[    0.029412] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>[    0.029414] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>[    0.029449] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
>[    0.029452] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.029455] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.029458] ACPI: IRQ0 used by override.
>[    0.029460] ACPI: IRQ9 used by override.
>[    0.029463] Using ACPI (MADT) for SMP configuration information
>[    0.029466] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.029471] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb2 (or later)
>[    0.029473] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[    0.029506] [mem 0x90000000-0xdfffffff] available for PCI devices
>[    0.029510] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
>[    0.194553] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>[    0.194864] percpu: Embedded 38 pages/cpu s126552 r0 d29096 u524288
>[    0.194876] pcpu-alloc: s126552 r0 d29096 u524288 alloc=1*2097152
>[    0.194877] pcpu-alloc: [0] 0 1 2 3 
>[    0.194898] Built 1 zonelists, mobility grouping on.  Total pages: 1010246
>[    0.194902] Kernel command line: BOOT_IMAGE=/boot/bzImage.test~ root=/dev/sda1 ro rootfstype=ext4 rootdir=/amd64 net.ifnames=0 drm.debug=0xe
>[    0.195427] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.195663] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.216863] Memory: 3942224K/4105220K available (10243K kernel code, 530K rwdata, 5496K rodata, 836K init, 1348K bss, 162996K reserved, 0K cma-reserved)
>[    0.216959] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.217026] rcu: Hierarchical RCU implementation.
>[    0.217029] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
>[    0.217058] NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
>[    0.221815] Console: colour VGA+ 80x25
>[    0.243734] printk: console [tty0] enabled
>[    0.243890] ACPI: Core revision 20190509
>[    0.244721] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
>[    0.245000] hpet clockevent registered
>[    0.245050] APIC: Switch to symmetric I/O mode setup
>[    0.249224] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.295016] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x15cb6aaa5cc, max_idle_ns: 440795251989 ns
>[    0.295268] Calibrating delay loop (skipped), value calculated using timer frequency.. 3024.00 BogoMIPS (lpj=15120000)
>[    0.295521] pid_max: default: 32768 minimum: 301
>[    0.295713] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.295886] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.296215] *** VALIDATE proc ***
>[    0.296417] process: using mwait in idle threads
>[    0.296573] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
>[    0.296729] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
>[    0.296886] Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available!
>[    0.296887] Speculative Store Bypass: Vulnerable
>[    0.297280] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
>[    0.297931] Freeing SMP alternatives memory: 32K
>[    0.305267] smpboot: CPU0: Intel(R) Core(TM) m3-6Y30 CPU @ 0.90GHz (family: 0x6, model: 0x4e, stepping: 0x3)
>[    0.305267] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
>[    0.305267] ... version:                4
>[    0.305267] ... bit width:              48
>[    0.305267] ... generic registers:      4
>[    0.305267] ... value mask:             0000ffffffffffff
>[    0.305267] ... max period:             00007fffffffffff
>[    0.305267] ... fixed-purpose events:   3
>[    0.305267] ... event mask:             000000070000000f
>[    0.305267] rcu: Hierarchical SRCU implementation.
>[    0.305267] smp: Bringing up secondary CPUs ...
>[    0.305267] x86: Booting SMP configuration:
>[    0.305267] .... node  #0, CPUs:      #1 #2
>[    0.305267] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
>[    0.305360]  #3
>[    0.306274] smp: Brought up 1 node, 4 CPUs
>[    0.306274] smpboot: Max logical packages: 1
>[    0.306274] smpboot: Total of 4 processors activated (12096.00 BogoMIPS)
>[    0.315276] devtmpfs: initialized
>[    0.315718] random: get_random_bytes called from setup_net+0x33/0x190 with crng_init=0
>[    0.315734] PM: Registering ACPI NVS region [mem 0x7569e000-0x7569efff] (4096 bytes)
>[    0.316128] PM: Registering ACPI NVS region [mem 0x8cc7e000-0x8ce7dfff] (2097152 bytes)
>[    0.316616] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
>[    0.317023] futex hash table entries: 1024 (order: 4, 65536 bytes)
>[    0.317298] pinctrl core: initialized pinctrl subsystem
>[    0.317633] NET: Registered protocol family 16
>[    0.318089] cpuidle: using governor ladder
>[    0.318089] cpuidle: using governor menu
>[    0.318089] Simple Boot Flag at 0x44 set to 0x1
>[    0.318089] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.318089] ACPI: bus type PCI registered
>[    0.318089] PCI: Using configuration type 1 for base access
>[    0.318089] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.318089] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
>[    0.318089] ACPI: Added _OSI(Module Device)
>[    0.318089] ACPI: Added _OSI(Processor Device)
>[    0.325275] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.325508] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.325739] ACPI: Added _OSI(Linux-Dell-Video)
>[    0.325969] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
>[    0.326204] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
>[    0.365699] ACPI: 12 ACPI AML tables successfully acquired and loaded
>[    0.370972] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
>[    0.375929] ACPI: Dynamic OEM Table Load:
>[    0.375929] ACPI: SSDT 0xFFFF888169938000 000492 (v02 PmRef  Cpu0Ist  00003000 INTL 20160108)
>[    0.376686] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
>[    0.377074] ACPI: Dynamic OEM Table Load:
>[    0.377315] ACPI: SSDT 0xFFFF88816A36F400 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20160108)
>[    0.378208] ACPI: Dynamic OEM Table Load:
>[    0.378446] ACPI: SSDT 0xFFFF88816A235F00 00008E (v02 PmRef  Cpu0Hwp  00003000 INTL 20160108)
>[    0.379192] ACPI: Dynamic OEM Table Load:
>[    0.379429] ACPI: SSDT 0xFFFF88816A3B8600 000130 (v02 PmRef  HwpLvt   00003000 INTL 20160108)
>[    0.385980] ACPI: Dynamic OEM Table Load:
>[    0.386223] ACPI: SSDT 0xFFFF888169938800 0005AA (v02 PmRef  ApIst    00003000 INTL 20160108)
>[    0.387243] ACPI: Dynamic OEM Table Load:
>[    0.387243] ACPI: SSDT 0xFFFF88816A3B9800 000119 (v02 PmRef  ApHwp    00003000 INTL 20160108)
>[    0.387244] ACPI: Dynamic OEM Table Load:
>[    0.387244] ACPI: SSDT 0xFFFF88816A3BAC00 000119 (v02 PmRef  ApCst    00003000 INTL 20160108)
>[    0.388112] ACPI: Interpreter enabled
>[    0.388385] ACPI: (supports S0 S3 S5)
>[    0.388610] ACPI: Using IOAPIC for interrupt routing
>[    0.388883] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.390098] ACPI: Enabled 10 GPEs in block 00 to 7F
>[    0.395829] ACPI: Power Resource [PG00] (on)
>[    0.396544] ACPI: Power Resource [PG01] (on)
>[    0.397224] ACPI: Power Resource [PG02] (on)
>[    0.410917] ACPI: Power Resource [FN00] (on)
>[    0.412818] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    0.413062] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
>[    0.413503] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
>[    0.415536] PCI host bridge to bus 0000:00
>[    0.415766] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>[    0.416004] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>[    0.416242] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
>[    0.416629] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
>[    0.417017] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
>[    0.417401] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    0.417644] pci 0000:00:00.0: [8086:190c] type 00 class 0x060000
>[    0.418832] pci 0000:00:02.0: [8086:191e] type 00 class 0x030000
>[    0.419084] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb0ffffff 64bit]
>[    0.419332] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
>[    0.419725] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
>[    0.420913] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
>[    0.421169] pci 0000:00:04.0: reg 0x10: [mem 0xb1120000-0xb1127fff 64bit]
>[    0.422446] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
>[    0.422709] pci 0000:00:14.0: reg 0x10: [mem 0xb1100000-0xb110ffff 64bit]
>[    0.423043] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.425442] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
>[    0.425941] pci 0000:00:15.0: reg 0x10: [mem 0xb1132000-0xb1132fff 64bit]
>[    0.427293] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
>[    0.427293] pci 0000:00:15.1: reg 0x10: [mem 0xb1133000-0xb1133fff 64bit]
>[    0.428553] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
>[    0.428821] pci 0000:00:16.0: reg 0x10: [mem 0xb1134000-0xb1134fff 64bit]
>[    0.429160] pci 0000:00:16.0: PME# supported from D3hot
>[    0.430427] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
>[    0.430702] pci 0000:00:17.0: reg 0x10: [mem 0xb1130000-0xb1131fff]
>[    0.430947] pci 0000:00:17.0: reg 0x14: [mem 0xb1137000-0xb11370ff]
>[    0.431188] pci 0000:00:17.0: reg 0x18: [io  0x3080-0x3087]
>[    0.431429] pci 0000:00:17.0: reg 0x1c: [io  0x3088-0x308b]
>[    0.431667] pci 0000:00:17.0: reg 0x20: [io  0x3060-0x307f]
>[    0.431905] pci 0000:00:17.0: reg 0x24: [mem 0xb1135000-0xb11357ff]
>[    0.432199] pci 0000:00:17.0: PME# supported from D3hot
>[    0.433388] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
>[    0.433737] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.434980] pci 0000:00:1f.0: [8086:9d46] type 00 class 0x060100
>[    0.436289] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
>[    0.436544] pci 0000:00:1f.2: reg 0x10: [mem 0xb112c000-0xb112ffff]
>[    0.437775] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
>[    0.438040] pci 0000:00:1f.3: reg 0x10: [mem 0xb1128000-0xb112bfff 64bit]
>[    0.438312] pci 0000:00:1f.3: reg 0x20: [mem 0xb1110000-0xb111ffff 64bit]
>[    0.438606] pci 0000:00:1f.3: PME# supported from D3hot D3cold
>[    0.439839] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
>[    0.440134] pci 0000:00:1f.4: reg 0x10: [mem 0xb1136000-0xb11360ff 64bit]
>[    0.440444] pci 0000:00:1f.4: reg 0x20: [io  0x3040-0x305f]
>[    0.441767] pci 0000:01:00.0: [8086:24f3] type 00 class 0x028000
>[    0.442056] pci 0000:01:00.0: reg 0x10: [mem 0xb1000000-0xb1001fff 64bit]
>[    0.442531] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
>[    0.442998] pci 0000:00:1d.0: PCI bridge to [bus 01]
>[    0.443232] pci 0000:00:1d.0:   bridge window [mem 0xb1000000-0xb10fffff]
>[    0.443485] pci_bus 0000:00: on NUMA node 0
>[    0.455929] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.456254] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    0.456572] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.456890] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.457206] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.457523] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.457841] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.458159] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.458642] platform MSFT0101:00: failed to claim resource 1: [mem 0xfed40000-0xfed40fff]
>[    0.459036] acpi MSFT0101:00: platform device creation failed: -16
>[    0.459573] pci 0000:00:02.0: vgaarb: setting as boot VGA device
>[    0.459573] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    0.459573] pci 0000:00:02.0: vgaarb: bridge control possible
>[    0.459573] vgaarb: loaded
>[    0.459573] SCSI subsystem initialized
>[    0.459573] libata version 3.00 loaded.
>[    0.459573] ACPI: bus type USB registered
>[    0.459573] usbcore: registered new interface driver usbfs
>[    0.459573] usbcore: registered new interface driver hub
>[    0.459582] usbcore: registered new device driver usb
>[    0.459582] Advanced Linux Sound Architecture Driver Initialized.
>[    0.459582] PCI: Using ACPI for IRQ routing
>[    0.459582] PCI: pci_cache_line_size set to 64 bytes
>[    0.459582] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
>[    0.459582] e820: reserve RAM buffer [mem 0x7569e000-0x77ffffff]
>[    0.459582] e820: reserve RAM buffer [mem 0x75779000-0x77ffffff]
>[    0.459582] e820: reserve RAM buffer [mem 0x8c28e000-0x8fffffff]
>[    0.459582] e820: reserve RAM buffer [mem 0x8ceff000-0x8fffffff]
>[    0.459582] e820: reserve RAM buffer [mem 0x16f000000-0x16fffffff]
>[    0.459582] Bluetooth: Core ver 2.22
>[    0.459582] NET: Registered protocol family 31
>[    0.459582] Bluetooth: HCI device and connection manager initialized
>[    0.459582] Bluetooth: HCI socket layer initialized
>[    0.459582] Bluetooth: L2CAP socket layer initialized
>[    0.459582] Bluetooth: SCO socket layer initialized
>[    0.459887] clocksource: Switched to clocksource tsc-early
>[    0.460160] *** VALIDATE hugetlbfs ***
>[    0.460409] pnp: PnP ACPI init
>[    0.460836] system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
>[    0.461074] system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
>[    0.461074] system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
>[    0.461074] system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
>[    0.461074] system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
>[    0.461074] system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
>[    0.461074] system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
>[    0.461074] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.461074] system 00:01: [io  0x2000-0x20fe] has been reserved
>[    0.461074] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.461074] system 00:02: [io  0x0680-0x069f] has been reserved
>[    0.461074] system 00:02: [io  0xffff] has been reserved
>[    0.461074] system 00:02: [io  0xffff] has been reserved
>[    0.461074] system 00:02: [io  0xffff] has been reserved
>[    0.461074] system 00:02: [io  0x1800-0x18fe] has been reserved
>[    0.461074] system 00:02: [io  0x164e-0x164f] has been reserved
>[    0.461074] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.461074] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.461074] system 00:04: [io  0x1854-0x1857] has been reserved
>[    0.461074] system 00:04: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.461074] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.462214] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.462869] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.463109] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.463347] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.467754] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.467992] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.468229] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.468467] system 00:07: [mem 0xfed45000-0xfed8ffff] could not be reserved
>[    0.468706] system 00:07: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.468945] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    0.469185] system 00:07: [mem 0x90000000-0x9001ffff] has been reserved
>[    0.469425] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.469853] pnp: PnP ACPI: found 8 devices
>[    0.476079] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    0.476488] pci 0000:00:1d.0: PCI bridge to [bus 01]
>[    0.476725] pci 0000:00:1d.0:   bridge window [mem 0xb1000000-0xb10fffff]
>[    0.476973] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>[    0.477209] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>[    0.477444] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
>[    0.477683] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
>[    0.477922] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
>[    0.478156] pci_bus 0000:01: resource 1 [mem 0xb1000000-0xb10fffff]
>[    0.478590] NET: Registered protocol family 2
>[    0.478958] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
>[    0.479358] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>[    0.479802] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.480123] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.480390] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.480640] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.480923] NET: Registered protocol family 1
>[    0.481282] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    0.483373] PCI: CLS 64 bytes, default 64
>[    0.483614] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.483852] software IO TLB: mapped [mem 0x8828e000-0x8c28e000] (64MB)
>[    0.484187] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
>[    0.484578] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
>[    0.484811] RAPL PMU: hw unit of domain package 2^-14 Joules
>[    0.485044] RAPL PMU: hw unit of domain dram 2^-14 Joules
>[    0.485272] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
>[    0.485501] RAPL PMU: hw unit of domain psys 2^-14 Joules
>[    0.485868] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x15cb6aaa5cc, max_idle_ns: 440795251989 ns
>[    0.486280] clocksource: Switched to clocksource tsc
>[    0.487093] Initialise system trusted keyrings
>[    0.487356] workingset: timestamp_bits=62 max_order=20 bucket_order=0
>[    0.489503] fuse: init (API version 7.30)
>[    0.489814] 9p: Installing v9fs 9p2000 file system support
>[    0.490081] Key type asymmetric registered
>[    0.490309] Asymmetric key parser 'x509' registered
>[    0.490958] intel_idle: MWAIT substates: 0x11142120
>[    0.490959] intel_idle: v0.4.1 model 0x4E
>[    0.491273] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.491458] ACPI: AC Adapter [ADP0] (on-line)
>[    0.491777] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0C:00/input/input0
>[    0.492270] ACPI: Power Button [PWRB]
>[    0.492560] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:18/PNP0C0D:00/input/input1
>[    0.493055] ACPI: Lid Switch [LID0]
>[    0.493368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[    0.493850] ACPI: Power Button [PWRF]
>[    0.495988] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.496242] ACPI: Thermal Zone [TZ01] (46 C)
>[    0.498132] [drm:intel_pch_type] Found SunrisePoint LP PCH
>[    0.498137] [drm:i915_driver_load] WOPCM size: 1024KiB
>[    0.498143] [drm:intel_uc_init_early] enable_guc=0 (submission:no huc:no)
>[    0.498146] [drm:i915_driver_load] guc_log_level=0 (enabled:no, verbose:no, verbosity:0)
>[    0.498151] [drm:intel_power_domains_init] Allowed DC state mask 03
>[    0.498184] pmd_set_huge: Cannot satisfy [mem 0xb0000000-0xb0200000] with a huge-page mapping due to MTRR override.
>[    0.498415] battery: ACPI: Battery Slot [BAT0] (battery present)
>[    0.498976] [drm:i915_ggtt_probe_hw] GGTT size = 4096M
>[    0.498979] [drm:i915_ggtt_probe_hw] GMADR size = 256M
>[    0.498981] [drm:i915_ggtt_probe_hw] DSM size = 32M
>[    0.498985] i915 0000:00:02.0: vgaarb: deactivate vga console
>[    0.502195] Console: switching to colour dummy device 80x25
>[    0.502534] [drm:i915_gem_init_stolen] GEN6_STOLEN_RESERVED = 8ff00047
>[    0.502538] [drm:i915_gem_init_stolen] Memory reserved for graphics device: 32768K, usable: 31744K
>[    0.502774] [drm:intel_gt_init_workarounds] Initialized 5 GT workarounds
>[    0.502842] [drm:intel_opregion_setup] graphic opregion physical addr: 0x8ce5f018
>[    0.502852] [drm:intel_opregion_setup] ACPI OpRegion version 2.0.0
>[    0.502855] [drm:intel_opregion_setup] Public ACPI methods supported
>[    0.502857] [drm:intel_opregion_setup] SWSCI supported
>[    0.504828] [drm:intel_opregion_setup] SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    0.504832] [drm:intel_opregion_setup] ASLE supported
>[    0.504835] [drm:intel_opregion_setup] ASLE extension supported
>[    0.504838] [drm:intel_opregion_setup] Found valid VBT in ACPI OpRegion (Mailbox #4)
>[    0.504843] [drm:i915_driver_load] DRAM type: LPDDR3
>[    0.504848] [drm:skl_dram_get_dimm_info] CH0 DIMM L size: 2 GB, width: X32, ranks: 2, 16Gb DIMMs: no
>[    0.504851] [drm:skl_dram_get_dimm_info] CH0 DIMM S size: 0 GB, width: X0, ranks: 0, 16Gb DIMMs: no
>[    0.504854] [drm:skl_dram_get_channel_info] CH0 ranks: 2, 16Gb DIMMs: no
>[    0.504857] [drm:skl_dram_get_dimm_info] CH1 DIMM L size: 2 GB, width: X32, ranks: 2, 16Gb DIMMs: no
>[    0.504860] [drm:skl_dram_get_dimm_info] CH1 DIMM S size: 0 GB, width: X0, ranks: 0, 16Gb DIMMs: no
>[    0.504862] [drm:skl_dram_get_channel_info] CH1 ranks: 2, 16Gb DIMMs: no
>[    0.504865] [drm:i915_driver_load] Memory configuration is symmetric? yes
>[    0.504868] [drm:i915_driver_load] DRAM bandwidth: 29866672 kBps, channels: 2
>[    0.504870] [drm:i915_driver_load] DRAM ranks: 2, 16Gb DIMMs: no
>[    0.504872] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    0.504878] [drm] Driver supports precise vblank timestamp query.
>[    0.504885] [drm:intel_bios_init] Set default to SSC at 120000 kHz
>[    0.504888] [drm:intel_bios_init] VBT signature "$VBT SKYLAKE        ", BDB version 205
>[    0.504893] [drm:intel_bios_init] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
>[    0.504896] [drm:intel_bios_init] crt_ddc_bus_pin: 2
>[    0.505566] [drm:intel_opregion_get_panel_type] Ignoring OpRegion panel type (0)
>[    0.505586] [drm:intel_bios_init] Panel type: 15 (VBT)
>[    0.505589] [drm:intel_bios_init] DRRS supported mode is static
>[    0.505594] [drm:intel_bios_init] Found panel mode in BIOS VBT tables:
>[    0.505601] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 0 140250 1920 1968 2000 2124 1080 1083 1089 1100 0x8 0xa
>[    0.505604] [drm:intel_bios_init] VBT initial LVDS value 20033c
>[    0.505609] [drm:intel_bios_init] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 255, controller 0
>[    0.505612] [drm:intel_bios_init] DRRS State Enabled:1
>[    0.505615] [drm:intel_bios_init] Skipping SDVO device mapping
>[    0.505620] [drm:intel_bios_init] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 LSPCON:0 USB-Type-C:0 TBT:0
>[    0.505624] [drm:intel_bios_init] VBT HDMI level shift for port A: 0
>[    0.505627] [drm:intel_bios_init] VBT (e)DP boost level for port A: 1
>[    0.505630] [drm:intel_bios_init] VBT HDMI boost level for port A: 1
>[    0.505634] [drm:intel_bios_init] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:1 TBT:0
>[    0.505637] [drm:intel_bios_init] VBT HDMI level shift for port B: 8
>[    0.505640] [drm:intel_bios_init] VBT (e)DP boost level for port B: 1
>[    0.505642] [drm:intel_bios_init] VBT HDMI boost level for port B: 7
>[    0.505646] [drm:intel_bios_init] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0
>[    0.505649] [drm:intel_bios_init] VBT HDMI level shift for port C: 8
>[    0.505652] [drm:intel_bios_init] VBT (e)DP boost level for port C: 1
>[    0.505654] [drm:intel_bios_init] VBT HDMI boost level for port C: 7
>[    0.505697] [drm:intel_dsm_detect] no _DSM method for intel device
>[    0.505718] [drm:i915_driver_load] rawclk rate: 24000 kHz
>[    0.505722] [drm:gen9_set_dc_state] Setting DC state from 00 to 00
>[    0.505729] [drm:intel_power_well_enable] enabling power well 1
>[    0.505734] [drm:intel_power_well_enable] enabling MISC IO power well
>[    0.505743] [drm:intel_dump_cdclk_state] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
>[    0.505748] [drm:intel_update_max_cdclk] Max CD clock rate: 675000 kHz
>[    0.505752] [drm:intel_cdclk_init] Max dotclock rate: 675000 kHz
>[    0.505767] [drm:intel_power_well_enable] enabling always-on
>[    0.505769] [drm:intel_power_well_enable] enabling DC off
>[    0.505772] [drm:gen9_set_dc_state] Setting DC state from 00 to 00
>[    0.505779] [drm:intel_power_well_enable] enabling power well 2
>[    0.505786] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    0.505798] [drm:intel_power_well_enable] enabling DDI A/E IO power well
>[    0.505801] [drm:intel_power_well_enable] enabling DDI B IO power well
>[    0.505804] [drm:intel_power_well_enable] enabling DDI C IO power well
>[    0.505807] [drm:intel_power_well_enable] enabling DDI D IO power well
>[    0.505822] [drm:intel_csr_ucode_init] Loading i915/skl_dmc_ver1_27.bin
>[    0.506325] [drm:intel_fbc_init] Sanitized enable_fbc value: 1
>[    0.506336] [drm:intel_print_wm_latency] Gen9 Plane WM0 latency 2 (2.0 usec)
>[    0.506339] [drm:intel_print_wm_latency] Gen9 Plane WM1 latency 19 (19.0 usec)
>[    0.506341] [drm:intel_print_wm_latency] Gen9 Plane WM2 latency 28 (28.0 usec)
>[    0.506344] [drm:intel_print_wm_latency] Gen9 Plane WM3 latency 32 (32.0 usec)
>[    0.506346] [drm:intel_print_wm_latency] Gen9 Plane WM4 latency 63 (63.0 usec)
>[    0.506349] [drm:intel_print_wm_latency] Gen9 Plane WM5 latency 77 (77.0 usec)
>[    0.506351] [drm:intel_print_wm_latency] Gen9 Plane WM6 latency 83 (83.0 usec)
>[    0.506354] [drm:intel_print_wm_latency] Gen9 Plane WM7 latency 99 (99.0 usec)
>[    0.506357] [drm:intel_modeset_init] 3 display pipes available.
>[    0.506446] [drm:intel_dump_cdclk_state] Current CDCLK 337500 kHz, VCO 8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
>[    0.506757] [drm:intel_bios_port_aux_ch] using AUX A for port A (VBT)
>[    0.506762] [drm:intel_dp_init_connector] Adding eDP connector on port A
>[    0.506821] [drm:intel_pps_dump_state] cur t1_t3 0 t8 0 t9 0 t10 500 t11_t12 6000
>[    0.506825] [drm:intel_pps_dump_state] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
>[    0.506829] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
>[    0.506832] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
>[    0.506905] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    0.506936] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    0.507004] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f
>[    0.507543] [drm:intel_dp_read_dpcd] DPCD: 12 0a 02 41 00 00 00 00 00 00 00 00 00 0b 00
>[    0.507807] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27)
>[    0.508023] [drm:drm_dp_read_desc] DP sink: OUI 38-ec-11 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    0.508371] [drm:intel_dp_init_connector] eDP DPCD: 02 88 00
>[    0.508712] [drm:intel_psr_init_dpcd] eDP panel supports PSR version 1
>[    0.512720] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[    0.512724] [drm:drm_add_display_info] non_desktop set to 0
>[    0.512746] [drm:drm_add_display_info] non_desktop set to 0
>[    0.512752] [drm:intel_panel_edid_fixed_mode] [CONNECTOR:86:eDP-1] using preferred mode from EDID: 
>[    0.512758] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140250 1920 1968 2000 2125 1080 1083 1089 1100 0x48 0x9
>[    0.512760] [drm:intel_dp_init_connector] VBT doesn't support DRRS
>[    0.512812] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 937/937
>[    0.512838] [drm:intel_bios_port_aux_ch] using AUX B for port B (VBT)
>[    0.512842] [drm:intel_dp_init_connector] Adding DP connector on port B
>[    0.512860] [drm:intel_hdmi_init_connector] Adding HDMI connector on port B
>[    0.512865] [drm:intel_hdmi_init_connector] Using DDC pin 0x5 for port B (VBT)
>[    0.512881] [drm:intel_bios_port_aux_ch] using AUX C for port C (platform default)
>[    0.512884] [drm:intel_hdmi_init_connector] Adding HDMI connector on port C
>[    0.512889] [drm:intel_hdmi_init_connector] Using DDC pin 0x4 for port C (VBT)
>[    0.512914] [drm:intel_modeset_setup_hw_state] [CRTC:48:pipe A] hw state readout: enabled
>[    0.512919] [drm:intel_modeset_setup_hw_state] [CRTC:66:pipe B] hw state readout: disabled
>[    0.512923] [drm:intel_modeset_setup_hw_state] [CRTC:84:pipe C] hw state readout: disabled
>[    0.512927] [drm:intel_modeset_setup_hw_state] [PLANE:31:plane 1A] hw state readout: disabled, pipe A
>[    0.512930] [drm:intel_modeset_setup_hw_state] [PLANE:38:plane 2A] hw state readout: disabled, pipe A
>[    0.512933] [drm:intel_modeset_setup_hw_state] [PLANE:45:cursor A] hw state readout: disabled, pipe A
>[    0.512936] [drm:intel_modeset_setup_hw_state] [PLANE:49:plane 1B] hw state readout: disabled, pipe B
>[    0.512938] [drm:intel_modeset_setup_hw_state] [PLANE:56:plane 2B] hw state readout: disabled, pipe B
>[    0.512941] [drm:intel_modeset_setup_hw_state] [PLANE:63:cursor B] hw state readout: disabled, pipe B
>[    0.512944] [drm:intel_modeset_setup_hw_state] [PLANE:67:plane 1C] hw state readout: disabled, pipe C
>[    0.512946] [drm:intel_modeset_setup_hw_state] [PLANE:74:plane 2C] hw state readout: disabled, pipe C
>[    0.512949] [drm:intel_modeset_setup_hw_state] [PLANE:81:cursor C] hw state readout: disabled, pipe C
>[    0.512954] [drm:intel_modeset_setup_hw_state] DPLL 0 hw state readout: crtc_mask 0x00000001, on 1
>[    0.512957] [drm:intel_modeset_setup_hw_state] DPLL 1 hw state readout: crtc_mask 0x00000000, on 0
>[    0.512959] [drm:intel_modeset_setup_hw_state] DPLL 2 hw state readout: crtc_mask 0x00000000, on 0
>[    0.512962] [drm:intel_modeset_setup_hw_state] DPLL 3 hw state readout: crtc_mask 0x00000000, on 0
>[    0.512970] [drm:intel_modeset_setup_hw_state] [ENCODER:85:DDI A] hw state readout: enabled, pipe A
>[    0.512973] [drm:intel_modeset_setup_hw_state] [ENCODER:91:DDI B] hw state readout: disabled, pipe A
>[    0.512975] [drm:intel_modeset_setup_hw_state] [ENCODER:93:DP-MST A] hw state readout: disabled, pipe A
>[    0.512977] [drm:intel_modeset_setup_hw_state] [ENCODER:94:DP-MST B] hw state readout: disabled, pipe B
>[    0.512979] [drm:intel_modeset_setup_hw_state] [ENCODER:95:DP-MST C] hw state readout: disabled, pipe C
>[    0.512981] [drm:intel_modeset_setup_hw_state] [ENCODER:104:DDI C] hw state readout: disabled, pipe A
>[    0.512986] [drm:intel_modeset_setup_hw_state] [CONNECTOR:86:eDP-1] hw state readout: enabled
>[    0.512989] [drm:intel_modeset_setup_hw_state] [CONNECTOR:92:DP-1] hw state readout: disabled
>[    0.512993] [drm:intel_modeset_setup_hw_state] [CONNECTOR:99:HDMI-A-1] hw state readout: disabled
>[    0.512996] [drm:intel_modeset_setup_hw_state] [CONNECTOR:105:HDMI-A-2] hw state readout: disabled
>[    0.513003] [drm:intel_modeset_setup_hw_state] pipe A data rate 0 num active planes 0
>[    0.513005] [drm:intel_modeset_setup_hw_state] pipe B data rate 0 num active planes 0
>[    0.513007] [drm:intel_modeset_setup_hw_state] pipe C data rate 0 num active planes 0
>[    0.513018] [drm:intel_dump_pipe_config] [CRTC:48:pipe A] enable: yes [setup_hw_state]
>[    0.513023] [drm:intel_dump_pipe_config] active: yes, output_types: EDP (0x100), output format: RGB
>[    0.513026] [drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[    0.513031] [drm:intel_dump_pipe_config] dp m_n: lanes: 2; gmch_m: 6536123, gmch_n: 8388608, link_m: 272338, link_n: 524288, tu: 64
>[    0.513034] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0, infoframes enabled: 0x0
>[    0.513037] [drm:intel_dump_pipe_config] requested mode:
>[    0.513043] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140249 720 1968 2000 2124 400 1083 1089 1100 0x40 0x9
>[    0.513045] [drm:intel_dump_pipe_config] adjusted mode:
>[    0.513050] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140249 1920 1968 2000 2124 1080 1083 1089 1100 0x40 0x9
>[    0.513055] [drm:intel_dump_pipe_config] crtc timings: 140249 1920 1968 2000 2124 1080 1083 1089 1100, type: 0x40 flags: 0x9
>[    0.513058] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 720x400, pixel rate 140249
>[    0.513062] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x80000000, scaler_id: 0
>[    0.513065] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x07800438, enabled, force thru: no
>[    0.513068] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[    0.513072] [drm:intel_dump_pipe_config] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
>[    0.513075] [drm:intel_dump_pipe_config] [CRTC:66:pipe B] enable: no [setup_hw_state]
>[    0.513079] [drm:intel_dump_pipe_config] [CRTC:84:pipe C] enable: no [setup_hw_state]
>[    0.513130] [drm:intel_atomic_setup_scalers] Attached scaler id 0.0 to CRTC:48
>[    0.513145] [drm:skl_compute_wm] [PLANE:45:cursor A] ddb (   0 -    0) -> ( 860 -  892), size    0 ->   32
>[    0.513150] [drm:skl_compute_wm] [PLANE:31:plane 1A]   level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
>[    0.513156] [drm:skl_compute_wm] [PLANE:31:plane 1A]   lines    1,   1,   1,   1,   1,   1,   1,   1,   1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513161] [drm:skl_compute_wm] [PLANE:31:plane 1A]  blocks    4,   7,   7,   7,   7,   7,   7,   7,   7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513166] [drm:skl_compute_wm] [PLANE:31:plane 1A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513170] [drm:skl_compute_wm] [PLANE:38:plane 2A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
>[    0.513175] [drm:skl_compute_wm] [PLANE:38:plane 2A]   lines    1,   1,   1,   1,   1,   1,   1,   1,   1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513180] [drm:skl_compute_wm] [PLANE:38:plane 2A]  blocks    7,   7,   7,   7,   7,   7,   7,   7,   7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513185] [drm:skl_compute_wm] [PLANE:38:plane 2A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513189] [drm:skl_compute_wm] [PLANE:45:cursor A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
>[    0.513194] [drm:skl_compute_wm] [PLANE:45:cursor A]   lines    1,   1,   1,   1,   1,   1,   1,   1,   1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513199] [drm:skl_compute_wm] [PLANE:45:cursor A]  blocks    7,   7,   7,   7,   7,   7,   7,   7,   7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513203] [drm:skl_compute_wm] [PLANE:45:cursor A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513208] [drm:skl_compute_wm] [PLANE:49:plane 1B]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
>[    0.513213] [drm:skl_compute_wm] [PLANE:49:plane 1B]   lines    1,   1,   1,   1,   1,   1,   1,   1,   1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513218] [drm:skl_compute_wm] [PLANE:49:plane 1B]  blocks    7,   7,   7,   7,   7,   7,   7,   7,   7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513222] [drm:skl_compute_wm] [PLANE:49:plane 1B] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513226] [drm:skl_compute_wm] [PLANE:56:plane 2B]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
>[    0.513232] [drm:skl_compute_wm] [PLANE:56:plane 2B]   lines    1,   1,   1,   1,   1,   1,   1,   1,   1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513236] [drm:skl_compute_wm] [PLANE:56:plane 2B]  blocks    7,   7,   7,   7,   7,   7,   7,   7,   7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513241] [drm:skl_compute_wm] [PLANE:56:plane 2B] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513245] [drm:skl_compute_wm] [PLANE:63:cursor B]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
>[    0.513250] [drm:skl_compute_wm] [PLANE:63:cursor B]   lines    1,   1,   1,   1,   1,   1,   1,   1,   1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513255] [drm:skl_compute_wm] [PLANE:63:cursor B]  blocks    7,   7,   7,   7,   7,   7,   7,   7,   7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513259] [drm:skl_compute_wm] [PLANE:63:cursor B] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513264] [drm:skl_compute_wm] [PLANE:67:plane 1C]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
>[    0.513269] [drm:skl_compute_wm] [PLANE:67:plane 1C]   lines    1,   1,   1,   1,   1,   1,   1,   1,   1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513273] [drm:skl_compute_wm] [PLANE:67:plane 1C]  blocks    7,   7,   7,   7,   7,   7,   7,   7,   7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513278] [drm:skl_compute_wm] [PLANE:67:plane 1C] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513282] [drm:skl_compute_wm] [PLANE:74:plane 2C]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
>[    0.513287] [drm:skl_compute_wm] [PLANE:74:plane 2C]   lines    1,   1,   1,   1,   1,   1,   1,   1,   1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513292] [drm:skl_compute_wm] [PLANE:74:plane 2C]  blocks    7,   7,   7,   7,   7,   7,   7,   7,   7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513296] [drm:skl_compute_wm] [PLANE:74:plane 2C] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513300] [drm:skl_compute_wm] [PLANE:81:cursor C]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
>[    0.513306] [drm:skl_compute_wm] [PLANE:81:cursor C]   lines    1,   1,   1,   1,   1,   1,   1,   1,   1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513310] [drm:skl_compute_wm] [PLANE:81:cursor C]  blocks    7,   7,   7,   7,   7,   7,   7,   7,   7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.513315] [drm:skl_compute_wm] [PLANE:81:cursor C] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[    0.530903] [drm:i915_gem_init_ggtt] clearing unused GTT space: [1000, 100000000]
>[    0.530944] [drm:intel_engine_init_ctx_wa] Initialized 13 context workarounds
>[    0.530973] [drm:i915_gem_contexts_init] logical context support initialized
>[    0.531081] [drm:intel_engine_init_workarounds] Initialized 5 rcs0 workarounds
>[    0.531084] [drm:intel_engine_init_whitelist] Initialized 4 whitelist workarounds
>[    0.532009] [drm:intel_fbdev_init] pipe A not active or no fb, skipping
>[    0.532013] [drm:intel_fbdev_init] pipe B not active or no fb, skipping
>[    0.532018] [drm:intel_fbdev_init] pipe C not active or no fb, skipping
>[    0.532021] [drm:intel_fbdev_init] no active fbs found, not using BIOS config
>[    0.533195] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered
>[    0.533204] [drm:intel_dp_connector_register] registering DPDDC-A bus for card0-eDP-1
>[    0.533261] [drm:intel_dp_connector_register] registering DPDDC-B bus for card0-DP-1
>[    0.533330] [drm] Initialized i915 1.6.0 20190524 for 0000:00:02.0 on minor 0
>[    0.533456] [drm:intel_opregion_resume] 4 outputs detected
>[    0.537592] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    0.538108] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
>[    0.538190] [drm:intel_power_well_disable] disabling DDI D IO power well
>[    0.538195] [drm:intel_power_well_disable] disabling DDI C IO power well
>[    0.538199] [drm:intel_power_well_disable] disabling DDI B IO power well
>[    0.538202] [drm:intel_power_well_disable] disabling power well 2
>[    0.538215] i915 device info: pciid=0x191e rev=0x07 platform=SKYLAKE (subplatform=0x2) gen=9
>[    0.538217] i915 device info: is_mobile: no
>[    0.538218] i915 device info: is_lp: no
>[    0.538220] i915 device info: require_force_probe: no
>[    0.538221] i915 device info: has_64bit_reloc: yes
>[    0.538222] i915 device info: gpu_reset_clobbers_display: no
>[    0.538223] i915 device info: has_reset_engine: yes
>[    0.538225] i915 device info: has_fpga_dbg: yes
>[    0.538226] i915 device info: has_guc: yes
>[    0.538227] i915 device info: has_l3_dpf: no
>[    0.538228] i915 device info: has_llc: yes
>[    0.538229] i915 device info: has_logical_ring_contexts: yes
>[    0.538231] i915 device info: has_logical_ring_elsq: no
>[    0.538232] i915 device info: has_logical_ring_preemption: yes
>[    0.538237] [drm:drm_setup_crtcs] 
>[    0.538239] i915 device info: has_pooled_eu: no
>[    0.538244] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1]
>[    0.538246] i915 device info: has_rc6: yes
>[    0.538248] i915 device info: has_rc6p: no
>[    0.538251] [drm:intel_dp_detect] [CONNECTOR:86:eDP-1]
>[    0.538253] i915 device info: has_rps: yes
>[    0.538254] i915 device info: has_runtime_pm: yes
>[    0.538259] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    0.538261] i915 device info: has_snoop: no
>[    0.538264] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    0.538266] i915 device info: has_coherent_ggtt: yes
>[    0.538269] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    0.538271] i915 device info: unfenced_needs_alignment: no
>[    0.538272] i915 device info: hws_needs_physical: no
>[    0.538274] i915 device info: cursor_needs_physical: no
>[    0.538275] i915 device info: has_csr: yes
>[    0.538276] i915 device info: has_ddi: yes
>[    0.538277] i915 device info: has_dp_mst: yes
>[    0.538278] i915 device info: has_fbc: yes
>[    0.538279] i915 device info: has_gmch: no
>[    0.538280] i915 device info: has_hotplug: yes
>[    0.538282] i915 device info: has_ipc: yes
>[    0.538283] i915 device info: has_overlay: no
>[    0.538284] i915 device info: has_psr: yes
>[    0.538285] i915 device info: overlay_needs_physical: no
>[    0.538286] i915 device info: supports_tv: no
>[    0.538288] i915 device info: slice total: 1, mask=0001
>[    0.538289] i915 device info: subslice total: 3
>[    0.538291] i915 device info: slice0: 3 subslices, mask=0007
>[    0.538292] i915 device info: slice1: 0 subslices, mask=0000
>[    0.538294] i915 device info: slice2: 0 subslices, mask=0000
>[    0.538296] i915 device info: EU total: 24
>[    0.538298] i915 device info: EU per subslice: 8
>[    0.538299] i915 device info: has slice power gating: no
>[    0.538301] i915 device info: has subslice power gating: no
>[    0.538302] i915 device info: has EU power gating: yes
>[    0.538304] i915 device info: CS timestamp frequency: 12000 kHz
>[    0.538728] [drm:drm_dp_read_desc] DP sink: OUI 38-ec-11 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    0.539068] [drm:intel_dp_detect] MST support? port A: no, sink: no, modparam: yes
>[    0.539408] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1] status updated from unknown to connected
>[    0.539417] [drm:drm_add_display_info] non_desktop set to 0
>[    0.539423] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[    0.539426] [drm:drm_add_display_info] non_desktop set to 0
>[    0.539477] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1] probed modes :
>[    0.539484] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140250 1920 1968 2000 2125 1080 1083 1089 1100 0x48 0x9
>[    0.539490] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 47 112200 1920 2020 2120 2125 1080 1100 1120 1121 0x40 0x9
>[    0.539492] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:DP-1]
>[    0.539495] [drm:intel_dp_detect] [CONNECTOR:92:DP-1]
>[    0.539515] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:DP-1] status updated from unknown to disconnected
>[    0.539517] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:DP-1] disconnected
>[    0.539520] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:HDMI-A-1]
>[    0.539524] [drm:intel_hdmi_detect] [CONNECTOR:99:HDMI-A-1]
>[    0.540343] loop: module loaded
>[    0.540823] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
>[    0.546020] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
>[    0.550345] ahci 0000:00:17.0: version 3.0
>[    0.550628] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
>[    0.550637] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    0.551117] scsi host0: ahci
>[    0.551303] scsi host1: ahci
>[    0.551381] ata1: SATA max UDMA/133 abar m2048@0xb1135000 port 0xb1135100 irq 122
>[    0.551391] ata2: SATA max UDMA/133 abar m2048@0xb1135000 port 0xb1135180 irq 122
>[    0.551428] PPP generic driver version 2.4.2
>[    0.551481] PPP BSD Compression module registered
>[    0.551485] PPP Deflate Compression module registered
>[    0.551495] PPP MPPE Compression module registered
>[    0.551500] NET: Registered protocol family 24
>[    0.551509] Intel(R) Wireless WiFi driver for Linux
>[    0.551512] Copyright(c) 2003- 2015 Intel Corporation
>[    0.552595] usbcore: registered new interface driver rtl8xxxu
>[    0.552606] usbcore: registered new interface driver r8152
>[    0.552841] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.552852] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
>[    0.553965] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
>[    0.553979] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    0.554851] iwlwifi 0000:01:00.0: loaded firmware version 36.9f0a2d68.0 op_mode iwlmvm
>[    0.554869] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
>[    0.554984] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
>[    0.554992] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.555006] usb usb1: Product: xHCI Host Controller
>[    0.555010] usb usb1: Manufacturer: Linux 5.2.0-rc3-00948-g999689d568a8-dirty xhci-hcd
>[    0.555015] usb usb1: SerialNumber: 0000:00:14.0
>[    0.555179] hub 1-0:1.0: USB hub found
>[    0.555215] hub 1-0:1.0: 12 ports detected
>[    0.556260] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.556268] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    0.556277] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
>[    0.556379] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
>[    0.556388] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.556393] usb usb2: Product: xHCI Host Controller
>[    0.556397] usb usb2: Manufacturer: Linux 5.2.0-rc3-00948-g999689d568a8-dirty xhci-hcd
>[    0.556402] usb usb2: SerialNumber: 0000:00:14.0
>[    0.556569] hub 2-0:1.0: USB hub found
>[    0.556596] hub 2-0:1.0: 6 ports detected
>[    0.556779] usb: port power management may be unreliable
>[    0.557280] usbcore: registered new interface driver cdc_acm
>[    0.557284] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
>[    0.557301] usbcore: registered new interface driver usb-storage
>[    0.557323] usbcore: registered new interface driver ftdi_sio
>[    0.557332] usbserial: USB Serial support registered for FTDI USB Serial Device
>[    0.557358] usbcore: registered new interface driver garmin_gps
>[    0.557366] usbserial: USB Serial support registered for Garmin GPS usb/tty
>[    0.557375] usbcore: registered new interface driver pl2303
>[    0.557382] usbserial: USB Serial support registered for pl2303
>[    0.557418] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    0.557422] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    0.558571] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.558634] mousedev: PS/2 mouse device common for all mice
>[    0.558801] rtc_cmos 00:03: RTC can wake from S4
>[    0.559288] rtc_cmos 00:03: registered as rtc0
>[    0.559313] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    0.559335] i2c /dev entries driver
>[    0.559772] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
>[    0.562495] usbcore: registered new interface driver btusb
>[    0.562502] intel_pstate: Intel P-state driver initializing
>[    0.562874] intel_pstate: HWP enabled
>[    0.562915] usbcore: registered new interface driver usbhid
>[    0.562918] usbhid: USB HID core driver
>[    0.574074] random: fast init done
>[    0.575310] input: SYNA3105:00 06CB:7EA5 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-5/i2c-SYNA3105:00/0018:06CB:7EA5.0001/input/input5
>[    0.575479] hid-generic 0018:06CB:7EA5.0001: input: I2C HID v1.00 Mouse [SYNA3105:00 06CB:7EA5] on i2c-SYNA3105:00
>[    0.575852] usbcore: registered new interface driver snd-usb-audio
>[    0.575937] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>[    0.576366] NET: Registered protocol family 10
>[    0.576644] Segment Routing with IPv6
>[    0.576713] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
>[    0.576885] NET: Registered protocol family 17
>[    0.576899] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>[    0.576904] Bluetooth: HIDP socket layer initialized
>[    0.576944] 9pnet: Installing 9P2000 support
>[    0.577013] sched_clock: Marking stable (558759342, 17813537)->(705271293, -128698414)
>[    0.577269] registered taskstats version 1
>[    0.577273] Loading compiled-in X.509 certificates
>[    0.578507] rtc_cmos 00:03: setting system clock to 2019-06-09T23:11:16 UTC (1560121876)
>[    0.578584] cfg80211: Loading compiled-in X.509 certificates for regulatory database
>[    0.579292] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
>[    0.579302] ALSA device list:
>[    0.579306]   No soundcards found.
>[    0.579346] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
>[    0.579351] cfg80211: failed to load regulatory.db
>[    0.590703] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    0.594530] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    0.594534] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    0.594537] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    0.598341] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    0.598344] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    0.629272] iwlwifi 0000:01:00.0: base HW address: 00:c2:c6:ef:20:81
>[    0.650749] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    0.654581] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[    0.654587] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:HDMI-A-1] status updated from unknown to disconnected
>[    0.654593] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:HDMI-A-1] disconnected
>[    0.654600] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]
>[    0.654604] [drm:intel_hdmi_detect] [CONNECTOR:105:HDMI-A-2]
>[    0.654886] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    0.654888] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    0.655146] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    0.655170] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    0.655173] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    0.655176] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    0.658971] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    0.658975] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    0.659255] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    0.659258] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    0.659516] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    0.659541] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[    0.659544] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] status updated from unknown to disconnected
>[    0.659547] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected
>[    0.659550] [drm:drm_setup_crtcs] connector 86 enabled? yes
>[    0.659552] [drm:drm_setup_crtcs] connector 92 enabled? no
>[    0.659553] [drm:drm_setup_crtcs] connector 99 enabled? no
>[    0.659555] [drm:drm_setup_crtcs] connector 105 enabled? no
>[    0.659560] [drm:drm_setup_crtcs] Not using firmware configuration
>[    0.659563] [drm:drm_setup_crtcs] looking for cmdline mode on connector 86
>[    0.659565] [drm:drm_setup_crtcs] looking for preferred mode on connector 86 0
>[    0.659567] [drm:drm_setup_crtcs] found mode 1920x1080
>[    0.659569] [drm:drm_setup_crtcs] picking CRTCs for 16384x16384 config
>[    0.659576] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 48 (0,0)
>[    0.659585] [drm:intelfb_create] no BIOS fb, allocating a new one
>[    0.659588] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffff81c7c1d0)
>[    0.659596] [drm:intel_power_well_enable] enabling power well 2
>[    0.660399] [drm:intelfb_create] allocated 1920x1080 fb: 0x00040000
>[    0.660505] fbcon: i915drmfb (fb0) is primary device
>[    0.660612] [drm:intel_atomic_check] [CONNECTOR:86:eDP-1] Limiting display bpp to 24 instead of EDID bpp 24, requested bpp 36, max platform bpp 36
>[    0.660632] [drm:skl_update_scaler] scaler_user index 0.31: Staged freeing scaler id 0 scaler_users = 0x0
>[    0.660636] [drm:intel_dp_compute_config] DP link computation with max lane count 2 max rate 270000 max bpp 24 pixel clock 140250KHz
>[    0.660638] [drm:intel_dp_compute_config] Force DSC en = 0
>[    0.660641] [drm:intel_dp_compute_config] DP lane count 2 clock 270000 bpp 24
>[    0.660643] [drm:intel_dp_compute_config] DP link rate required 420750 available 540000
>[    0.660657] [drm:intel_dp_compute_config] PSR condition failed: PSR setup time (330 us) too long
>[    0.660660] [drm:intel_atomic_check] hw max bpp: 24, pipe bpp: 24, dithering: 0
>[    0.660665] [drm:pipe_config_err] mismatch in base.adjusted_mode.crtc_htotal (expected 2124, found 2125)
>[    0.660668] [drm:pipe_config_err] mismatch in base.adjusted_mode.crtc_hblank_end (expected 2124, found 2125)
>[    0.660676] [drm:intel_atomic_check] New cdclk calculated to be logical 337500 kHz, actual 337500 kHz
>[    0.660678] [drm:intel_atomic_check] New voltage level calculated to be logical 0, actual 0
>[    0.660691] [drm:intel_find_shared_dpll] [CRTC:48:pipe A] allocated DPLL 0
>[    0.660695] [drm:intel_reference_shared_dpll] using DPLL 0 for pipe A
>[    0.660714] [drm:skl_compute_wm] [PLANE:31:plane 1A] ddb (   0 -    0) -> (   0 -  860), size    0 ->  860
>[    0.660720] [drm:skl_compute_wm] [PLANE:31:plane 1A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm
>[    0.660726] [drm:skl_compute_wm] [PLANE:31:plane 1A]   lines    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    0,   2,   2,   3,   5,   6,   6,   7,   0
>[    0.660732] [drm:skl_compute_wm] [PLANE:31:plane 1A]  blocks    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    4,  23,  33,  38,  72,  87,  93, 111,   0
>[    0.660737] [drm:skl_compute_wm] [PLANE:31:plane 1A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    5,  24,  34,  39,  73,  88,  94, 112,   0
>[    0.660744] [drm:intel_dump_pipe_config] [CRTC:48:pipe A] enable: yes [modeset]
>[    0.660749] [drm:intel_dump_pipe_config] active: yes, output_types: EDP (0x100), output format: RGB
>[    0.660753] [drm:intel_dump_pipe_config] cpu_transcoder: EDP, pipe bpp: 24, dithering: 0
>[    0.660757] [drm:intel_dump_pipe_config] dp m_n: lanes: 2; gmch_m: 6536123, gmch_n: 8388608, link_m: 272338, link_n: 524288, tu: 64
>[    0.660761] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0, infoframes enabled: 0x0
>[    0.660764] [drm:intel_dump_pipe_config] requested mode:
>[    0.660771] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140250 1920 1968 2000 2125 1080 1083 1089 1100 0x48 0x9
>[    0.660774] [drm:intel_dump_pipe_config] adjusted mode:
>[    0.660779] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140250 1920 1968 2000 2125 1080 1083 1089 1100 0x48 0x9
>[    0.660783] [drm:intel_dump_pipe_config] crtc timings: 140250 1920 1968 2000 2125 1080 1083 1089 1100, type: 0x48 flags: 0x9
>[    0.660787] [drm:intel_dump_pipe_config] port clock: 270000, pipe src size: 1920x1080, pixel rate 140250
>[    0.660791] [drm:intel_dump_pipe_config] num_scalers: 2, scaler_users: 0x0, scaler_id: -1
>[    0.660795] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled, force thru: no
>[    0.660798] [drm:intel_dump_pipe_config] ips: 0, double wide: 0
>[    0.660802] [drm:intel_dump_pipe_config] dpll_hw_state: ctrl1: 0x3, cfgcr1: 0x0, cfgcr2: 0x0
>[    0.660807] [drm:intel_dump_pipe_config] [PLANE:31:plane 1A] fb: [FB:87] 1920x1080 format = XR24 little-endian (0x34325258), visible: yes
>[    0.660810] [drm:intel_dump_pipe_config] 	rotation: 0x1, scaler: -1
>[    0.660816] [drm:intel_dump_pipe_config] 	src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0
>[    0.660820] [drm:intel_dump_pipe_config] [PLANE:38:plane 2A] fb: [NOFB], visible: no
>[    0.660823] [drm:intel_dump_pipe_config] [PLANE:45:cursor A] fb: [NOFB], visible: no
>[    0.660859] [drm:intel_edp_backlight_off] 
>[    0.679527] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[    0.679530] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    0.679533] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[    0.679534] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
>[    0.679536] snd_hda_codec_realtek hdaudioC0D0:    inputs:
>[    0.679538] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x12
>[    0.701754] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>[    0.702051] thermal thermal_zone1: failed to read out thermal zone (-61)
>[    0.733733] [drm:i915_audio_component_get_eld] Not valid for port B
>[    0.733737] [drm:i915_audio_component_get_eld] Not valid for port B
>[    0.733740] [drm:i915_audio_component_get_eld] Not valid for port B
>[    0.733743] [drm:i915_audio_component_get_eld] Not valid for port C
>[    0.733746] [drm:i915_audio_component_get_eld] Not valid for port C
>[    0.733748] [drm:i915_audio_component_get_eld] Not valid for port C
>[    0.733751] [drm:i915_audio_component_get_eld] Not valid for port D
>[    0.733753] [drm:i915_audio_component_get_eld] Not valid for port D
>[    0.733756] [drm:i915_audio_component_get_eld] Not valid for port D
>[    0.735077] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
>[    0.735141] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
>[    0.735199] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
>[    0.735254] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
>[    0.735323] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
>[    0.735379] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
>[    0.806253] [drm:intel_power_well_disable] disabling power well 2
>[    0.875630] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
>[    0.875660] [drm:lpt_disable_backlight] cpu backlight was enabled, disabling
>[    0.875688] [drm:intel_disable_pipe] disabling pipe A
>[    0.878562] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    0.878593] ata1: SATA link down (SStatus 4 SControl 300)
>[    0.881061] ata2.00: ATA-9: SAMSUNG MZNTY128HDHP-00000, MAT2100Q, max UDMA/133
>[    0.881064] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
>[    0.881324] [drm:intel_edp_panel_off.part.0] Turn eDP port A panel power off
>[    0.881362] [drm:intel_edp_panel_off.part.0] Wait for panel power off time
>[    0.881429] [drm:wait_panel_status] mask b0000000 value 00000000 status 80000008 control 00000000
>[    0.883308] ata2.00: configured for UDMA/133
>[    0.933190] [drm:wait_panel_status] Wait complete
>[    0.933201] [drm:intel_power_well_disable] disabling DDI A/E IO power well
>[    0.933217] [drm:intel_disable_shared_dpll] disable DPLL 0 (active 1, on? 1) for crtc 48
>[    0.933225] [drm:intel_disable_shared_dpll] disabling DPLL 0
>[    0.933236] [drm:intel_atomic_commit_tail] [ENCODER:85:DDI A]
>[    0.933239] [drm:intel_atomic_commit_tail] [ENCODER:91:DDI B]
>[    0.933242] [drm:intel_atomic_commit_tail] [ENCODER:93:DP-MST A]
>[    0.933244] [drm:intel_atomic_commit_tail] [ENCODER:94:DP-MST B]
>[    0.933246] [drm:intel_atomic_commit_tail] [ENCODER:95:DP-MST C]
>[    0.933248] [drm:intel_atomic_commit_tail] [ENCODER:104:DDI C]
>[    0.933254] [drm:verify_single_dpll_state.isra.0] DPLL 0
>[    0.933259] [drm:verify_single_dpll_state.isra.0] DPLL 1
>[    0.933265] [drm:verify_single_dpll_state.isra.0] DPLL 2
>[    0.933269] [drm:verify_single_dpll_state.isra.0] DPLL 3
>[    0.933280] [drm:intel_enable_shared_dpll] enable DPLL 0 (active 1, on? 0) for crtc 48
>[    0.933284] [drm:intel_enable_shared_dpll] enabling DPLL 0
>[    0.933295] [drm:edp_panel_on] Turn eDP port A panel power on
>[    0.933316] [drm:wait_panel_power_cycle] Wait for panel power cycle
>[    0.933974] [drm:gen8_de_irq_handler] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010
>[    0.933981] [drm:intel_hpd_irq_handler] digital hpd port A - long
>[    0.933986] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 10
>[    0.934096] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A
>[    0.935646] usb 1-3: new full-speed USB device number 2 using xhci_hcd
>[    1.118320] usb 1-3: New USB device found, idVendor=8087, idProduct=0a2b, bcdDevice= 0.01
>[    1.118324] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.122743] Bluetooth: hci0: Firmware revision 0.0 build 10 week 41 2018
>[    1.265822] usb 1-7: new high-speed USB device number 3 using xhci_hcd
>[    1.454698] usb 1-7: New USB device found, idVendor=04f2, idProduct=b59a, bcdDevice=34.04
>[    1.454702] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.454706] usb 1-7: Product: XiaoMi USB 2.0 Webcam
>[    1.454708] usb 1-7: Manufacturer: Chicony
>[    1.545920] [drm:wait_panel_status] mask b800000f value 00000000 status 00000000 control 00000000
>[    1.545942] [drm:wait_panel_status] Wait complete
>[    1.545983] [drm:edp_panel_on] Wait for panel power on
>[    1.546055] [drm:wait_panel_status] mask b000000f value 80000008 status 0000000a control 00000003
>[    1.602953] [drm:gen8_de_irq_handler] hotplug event received, stat 0x01000000, dig 0x12101010, pins 0x00000010, long 0x00000010
>[    1.602962] [drm:intel_hpd_irq_handler] digital hpd port A - long
>[    1.602969] [drm:intel_hpd_irq_handler] Received HPD interrupt on PIN 4 - cnt: 20
>[    1.603044] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port A
>[    1.748595] [drm:wait_panel_status] Wait complete
>[    1.748613] [drm:intel_power_well_enable] enabling DDI A/E IO power well
>[    1.748659] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[    1.748734] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000b
>[    1.749538] [drm:intel_dp_start_link_train] Using LINK_BW_SET value 0a
>[    1.749908] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
>[    1.749913] [drm:intel_dp_set_signal_levels] Using vswing level 0
>[    1.749916] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    1.749921] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS1
>[    1.750604] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[    1.750607] [drm:intel_dp_set_signal_levels] Using vswing level 1
>[    1.750610] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    1.751280] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
>[    1.751284] [drm:intel_dp_set_signal_levels] Using vswing level 1
>[    1.751287] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
>[    1.751957] [drm:intel_dp_start_link_train] clock recovery OK
>[    1.751962] [drm:intel_dp_program_link_training_pattern] Using DP training pattern TPS2
>[    1.752943] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
>[    1.752946] [drm:intel_dp_set_signal_levels] Using vswing level 1
>[    1.752949] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1
>[    1.753918] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
>[    1.753922] [drm:intel_dp_set_signal_levels] Using vswing level 1
>[    1.753925] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1
>[    1.754886] [drm:intel_dp_start_link_train] Channel EQ done. DP Training successful
>[    1.754889] [drm:intel_dp_start_link_train] [CONNECTOR:86:eDP-1] Link Training Passed at Link Rate = 270000, Lane count = 2
>[    1.755061] [drm:intel_enable_pipe] enabling pipe A
>[    1.755069] [drm:intel_edp_backlight_on] 
>[    1.755071] [drm:intel_panel_enable_backlight] pipe A
>[    1.755151] [drm:intel_panel_actually_set_backlight] set backlight PWM = 937
>[    1.775904] [drm:intel_enable_ddi] Panel doesn't support DRRS
>[    1.775912] [drm:intel_fbc_enable] reserved 16588800 bytes of contiguous stolen space for FBC, threshold: 1
>[    1.775913] [drm:intel_fbc_enable] Enabling FBC on pipe A
>[    1.789015] [drm:verify_connector_state.isra.0] [CONNECTOR:86:eDP-1]
>[    1.789023] [drm:intel_atomic_commit_tail] [CRTC:48:pipe A]
>[    1.789042] [drm:verify_single_dpll_state.isra.0] DPLL 0
>[    1.789054] [drm:intel_enable_sagv] Enabling SAGV
>[    1.814337] Console: switching to colour frame buffer device 240x67
>[    1.836691] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
>[    1.836891] [drm:drm_fb_helper_hotplug_event.part.0] 
>[    1.836895] [drm:drm_setup_crtcs] 
>[    1.836903] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1]
>[    1.836909] [drm:intel_dp_detect] [CONNECTOR:86:eDP-1]
>[    1.836918] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    1.836923] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    1.836928] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    1.837083] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG MZNTY128 100Q PQ: 0 ANSI: 5
>[    1.837564] [drm:drm_dp_read_desc] DP sink: OUI 38-ec-11 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    1.837591] sd 1:0:0:0: Attached scsi generic sg0 type 0
>[    1.837600] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
>[    1.837813] sd 1:0:0:0: [sda] Write Protect is off
>[    1.837887] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.837931] [drm:intel_dp_detect] MST support? port A: no, sink: no, modparam: yes
>[    1.837934] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.838388] [drm:drm_add_display_info] non_desktop set to 0
>[    1.838400] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[    1.838406] [drm:drm_add_display_info] non_desktop set to 0
>[    1.838501] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1] probed modes :
>[    1.838510] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140250 1920 1968 2000 2125 1080 1083 1089 1100 0x48 0x9
>[    1.838518] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 47 112200 1920 2020 2120 2125 1080 1100 1120 1121 0x40 0x9
>[    1.838522] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:DP-1]
>[    1.838526] [drm:intel_dp_detect] [CONNECTOR:92:DP-1]
>[    1.838544] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:DP-1] disconnected
>[    1.838548] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:HDMI-A-1]
>[    1.838553] [drm:intel_hdmi_detect] [CONNECTOR:99:HDMI-A-1]
>[    1.840185]  sda: sda1 sda2
>[    1.841890] sd 1:0:0:0: [sda] Attached SCSI disk
>[    1.845324] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
>[    1.845418] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
>[    1.849057] devtmpfs: mounted
>[    1.849571] Freeing unused kernel image memory: 836K
>[    1.890313] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    1.894499] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.894505] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.894511] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    1.898475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    1.898477] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    1.915647] Write protecting the kernel read-only data: 18432k
>[    1.916467] Freeing unused kernel image memory: 2012K
>[    1.918845] Freeing unused kernel image memory: 648K
>[    1.921377] Run /sbin/init as init process
>[    1.950612] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    1.954204] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[    1.954211] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:HDMI-A-1] disconnected
>[    1.954219] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]
>[    1.954225] [drm:intel_hdmi_detect] [CONNECTOR:105:HDMI-A-2]
>[    1.954526] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    1.954531] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    1.954800] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    1.954834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.954840] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    1.954846] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    1.958979] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    1.958986] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    1.959276] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    1.959281] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    1.959539] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    1.959577] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[    1.959583] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected
>[    1.959590] [drm:drm_setup_crtcs] connector 86 enabled? yes
>[    1.959594] [drm:drm_setup_crtcs] connector 92 enabled? no
>[    1.959597] [drm:drm_setup_crtcs] connector 99 enabled? no
>[    1.959601] [drm:drm_setup_crtcs] connector 105 enabled? no
>[    1.959609] [drm:drm_setup_crtcs] Not using firmware configuration
>[    1.959614] [drm:drm_setup_crtcs] looking for cmdline mode on connector 86
>[    1.959618] [drm:drm_setup_crtcs] looking for preferred mode on connector 86 0
>[    1.959622] [drm:drm_setup_crtcs] found mode 1920x1080
>[    1.959626] [drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config
>[    1.959637] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 48 (0,0)
>[    1.971822] [drm:drm_fb_helper_hotplug_event.part.0] 
>[    1.971825] [drm:drm_setup_crtcs] 
>[    1.971831] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1]
>[    1.971836] [drm:intel_dp_detect] [CONNECTOR:86:eDP-1]
>[    1.971846] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[    1.971852] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[    1.971858] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[    1.972331] [drm:drm_dp_read_desc] DP sink: OUI 38-ec-11 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[    1.972693] [drm:intel_dp_detect] MST support? port A: no, sink: no, modparam: yes
>[    1.973043] [drm:drm_add_display_info] non_desktop set to 0
>[    1.973051] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[    1.973055] [drm:drm_add_display_info] non_desktop set to 0
>[    1.973123] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1] probed modes :
>[    1.973133] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140250 1920 1968 2000 2125 1080 1083 1089 1100 0x48 0x9
>[    1.973142] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 47 112200 1920 2020 2120 2125 1080 1100 1120 1121 0x40 0x9
>[    1.973146] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:DP-1]
>[    1.973150] [drm:intel_dp_detect] [CONNECTOR:92:DP-1]
>[    1.973166] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:DP-1] disconnected
>[    1.973170] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:HDMI-A-1]
>[    1.973175] [drm:intel_hdmi_detect] [CONNECTOR:99:HDMI-A-1]
>[    2.025326] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    2.029475] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    2.029483] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.029489] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    2.033588] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[    2.033594] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    2.085353] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[    2.089104] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[    2.089109] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:HDMI-A-1] disconnected
>[    2.089114] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]
>[    2.089116] [drm:intel_hdmi_detect] [CONNECTOR:105:HDMI-A-2]
>[    2.089344] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.089346] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.089642] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[    2.089665] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.089667] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.089669] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[    2.093618] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[    2.093622] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[    2.093894] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.093896] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[    2.094144] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[    2.094177] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[    2.094180] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected
>[    2.094183] [drm:drm_setup_crtcs] connector 86 enabled? yes
>[    2.094185] [drm:drm_setup_crtcs] connector 92 enabled? no
>[    2.094186] [drm:drm_setup_crtcs] connector 99 enabled? no
>[    2.094187] [drm:drm_setup_crtcs] connector 105 enabled? no
>[    2.094191] [drm:drm_setup_crtcs] Not using firmware configuration
>[    2.094193] [drm:drm_setup_crtcs] looking for cmdline mode on connector 86
>[    2.094195] [drm:drm_setup_crtcs] looking for preferred mode on connector 86 0
>[    2.094196] [drm:drm_setup_crtcs] found mode 1920x1080
>[    2.094197] [drm:drm_setup_crtcs] picking CRTCs for 1920x1080 config
>[    2.094202] [drm:drm_setup_crtcs] desired mode 1920x1080 set on crtc 48 (0,0)
>[    2.130218] systemd-udevd[174]: Network interface NamePolicy= disabled on kernel command line, ignoring.
>[    2.249631] systemd-udevd[225]: Using default interface naming scheme 'v240'.
>[    2.259090] systemd-udevd[225]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
>[    2.259131] systemd-udevd[242]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
>[    2.263651] systemd-udevd[206]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
>[    2.287835] systemd-udevd[239]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 0' failed with exit code 99.
>[    3.232813] EXT4-fs (sda1): re-mounted. Opts: (null)
>[    3.261452] EXT4-fs (sda1): re-mounted. Opts: (null)
>[    3.413061] EXT4-fs (sda1): re-mounted. Opts: (null)
>[    3.503895] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=286/937
>[    3.503898] [drm:intel_panel_actually_set_backlight] set backlight PWM = 286
>[    3.590000] random: dd: uninitialized urandom read (512 bytes read)
>[    3.601712] random: perl: uninitialized urandom read (4 bytes read)
>[    3.662868] random: crng init done
>[    4.875702] [drm:intel_backlight_device_get_brightness] get backlight PWM = 286
>[    5.035847] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[    5.035923] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007
>[    5.035934] [drm:intel_power_well_disable] disabling DC off
>[    5.035950] [drm:skl_enable_dc6] Enabling DC6
>[    5.035962] [drm:gen9_set_dc_state] Setting DC state from 00 to 02
>[    7.592766] wlan0: authenticate with 90:f6:52:f5:f7:e5
>[    7.607463] wlan0: send auth to 90:f6:52:f5:f7:e5 (try 1/3)
>[    7.617547] wlan0: authenticated
>[    7.625478] wlan0: associate with 90:f6:52:f5:f7:e5 (try 1/3)
>[    7.633996] wlan0: RX AssocResp from 90:f6:52:f5:f7:e5 (capab=0x411 status=0 aid=2)
>[    7.643664] wlan0: associated
>[    7.692690] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>[    8.789924] hid-generic 0005:046D:B014.0002: unknown main item tag 0x0
>[    8.795165] input: Bluetooth Mouse M336/M337/M535 Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/bluetooth/hci0/hci0:256/0005:046D:B014.0002/input/input13
>[    8.799401] input: Bluetooth Mouse M336/M337/M535 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/bluetooth/hci0/hci0:256/0005:046D:B014.0002/input/input14
>[    8.804279] input: Bluetooth Mouse M336/M337/M535 Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/bluetooth/hci0/hci0:256/0005:046D:B014.0002/input/input17
>[    8.809306] hid-generic 0005:046D:B014.0002: input: BLUETOOTH HID v12.00 Mouse [Bluetooth Mouse M336/M337/M535] on 00:c2:c6:ef:20:85
>[   11.967896] [drm:drm_mode_addfb2] [FB:108]
>[   11.968236] [drm:intel_power_well_enable] enabling DC off
>[   11.968247] [drm:gen9_set_dc_state] Setting DC state from 02 to 00
>[   11.968516] [drm:intel_framebuffer_init] No Y tiling for legacy addfb
>[   11.968524] [drm:drm_internal_framebuffer_create] could not create framebuffer
>[   11.968539] [drm:drm_mode_addfb2] [FB:108]
>[   12.039259] [drm:drm_mode_addfb2] [FB:108]
>[   12.142793] [drm:drm_mode_setcrtc] [CRTC:48:pipe A]
>[   12.142800] [drm:drm_mode_setcrtc] [CONNECTOR:86:eDP-1]
>[   12.142825] [drm:skl_compute_wm] [PLANE:31:plane 1A]   level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm
>[   12.142828] [drm:skl_compute_wm] [PLANE:31:plane 1A]   lines    0,   2,   2,   3,   5,   6,   6,   7,   0 ->    0,   3,   3,   4,   6,   7,   7,   8,   0
>[   12.142831] [drm:skl_compute_wm] [PLANE:31:plane 1A]  blocks    4,  23,  33,  38,  72,  87,  93, 111,   0 ->   20,  40,  47,  54,  88, 103, 107, 122,   0
>[   12.142834] [drm:skl_compute_wm] [PLANE:31:plane 1A] min_ddb    5,  24,  34,  39,  73,  88,  94, 112,   0 ->   21,  41,  48,  55,  89, 104, 108, 123,   0
>[   12.308139] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1]
>[   12.308143] [drm:intel_dp_detect] [CONNECTOR:86:eDP-1]
>[   12.308148] [drm:intel_dp_print_rates] source rates: 162000, 216000, 270000, 324000, 432000, 540000
>[   12.308150] [drm:intel_dp_print_rates] sink rates: 162000, 270000
>[   12.308152] [drm:intel_dp_print_rates] common rates: 162000, 270000
>[   12.308175] [drm:edp_panel_vdd_on] Turning eDP port A VDD on
>[   12.308244] [drm:edp_panel_vdd_on] PP_STATUS: 0x80000008 PP_CONTROL: 0x0000000f
>[   12.308673] [drm:drm_dp_read_desc] DP sink: OUI 38-ec-11 dev-ID  HW-rev 0.0 SW-rev 0.0 quirks 0x0000
>[   12.309007] [drm:intel_dp_detect] MST support? port A: no, sink: no, modparam: yes
>[   12.309344] [drm:drm_add_display_info] non_desktop set to 0
>[   12.309350] [drm:drm_add_edid_modes] ELD: no CEA Extension found
>[   12.309352] [drm:drm_add_display_info] non_desktop set to 0
>[   12.309383] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:86:eDP-1] probed modes :
>[   12.309387] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 140250 1920 1968 2000 2125 1080 1083 1089 1100 0x48 0x9
>[   12.309390] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 47 112200 1920 2020 2120 2125 1080 1100 1120 1121 0x40 0x9
>[   12.309810] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:DP-1]
>[   12.309812] [drm:intel_dp_detect] [CONNECTOR:92:DP-1]
>[   12.309831] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:92:DP-1] disconnected
>[   12.309837] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:HDMI-A-1]
>[   12.309840] [drm:intel_hdmi_detect] [CONNECTOR:99:HDMI-A-1]
>[   12.361487] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[   12.365796] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   12.365805] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[   12.365813] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpb. force bit now 1
>[   12.370010] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
>[   12.370017] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpb. force bit now 0
>[   12.421498] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
>[   12.425797] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[   12.425807] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:99:HDMI-A-1] disconnected
>[   12.425879] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2]
>[   12.425888] [drm:intel_hdmi_detect] [CONNECTOR:105:HDMI-A-2]
>[   12.426203] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   12.426208] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   12.426489] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 w(1)
>[   12.426523] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   12.426530] [drm:intel_hdmi_set_edid] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
>[   12.426537] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus dpc. force bit now 1
>[   12.430745] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
>[   12.430750] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus dpc. force bit now 0
>[   12.431056] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   12.431060] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK on first message, retry
>[   12.431334] [drm:do_gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0040 w(1)
>[   12.431368] [drm:drm_dp_dual_mode_detect] DP dual mode HDMI ID:  (err -6)
>[   12.431372] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:105:HDMI-A-2] disconnected
>[   12.432580] [drm:skl_compute_wm] [PLANE:45:cursor A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm
>[   12.432592] [drm:skl_compute_wm] [PLANE:45:cursor A]   lines    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    0,   2,   2,   3,   5,   6,   6,   7,   0
>[   12.432602] [drm:skl_compute_wm] [PLANE:45:cursor A]  blocks    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    4,   6,   6,   8,  12,  14,  14,  16,   0
>[   12.432611] [drm:skl_compute_wm] [PLANE:45:cursor A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    5,   7,   7,   9,  13,  15,  15,  17,   0
>[   13.557126] atkbd serio0: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0).
>[   13.557142] atkbd serio0: Use 'setkeycodes e071 <keycode>' to make it known.
>[   13.564218] atkbd serio0: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0).
>[   13.564231] atkbd serio0: Use 'setkeycodes e071 <keycode>' to make it known.
>[   14.255422] [drm:intel_backlight_device_get_brightness] get backlight PWM = 286
>[   15.355836] [drm:edp_panel_vdd_off_sync] Turning eDP port A VDD off
>[   15.355912] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0x00000007
>[   18.275575] [drm:skl_compute_wm] [PLANE:45:cursor A]   level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
>[   18.275603] [drm:skl_compute_wm] [PLANE:45:cursor A]   lines    0,   2,   2,   3,   5,   6,   6,   7,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[   18.275615] [drm:skl_compute_wm] [PLANE:45:cursor A]  blocks    4,   6,   6,   8,  12,  14,  14,  16,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[   18.275626] [drm:skl_compute_wm] [PLANE:45:cursor A] min_ddb    5,   7,   7,   9,  13,  15,  15,  17,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[   22.006013] [drm:skl_compute_wm] [PLANE:45:cursor A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm
>[   22.006019] [drm:skl_compute_wm] [PLANE:45:cursor A]   lines    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    0,   2,   2,   3,   5,   6,   6,   7,   0
>[   22.006022] [drm:skl_compute_wm] [PLANE:45:cursor A]  blocks    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    4,   6,   6,   8,  12,  14,  14,  16,   0
>[   22.006026] [drm:skl_compute_wm] [PLANE:45:cursor A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0 ->    5,   7,   7,   9,  13,  15,  15,  17,   0
>[   24.245299] [drm:intel_backlight_device_get_brightness] get backlight PWM = 286
>[   26.236129] [drm:intel_power_well_disable] disabling DC off
>[   26.236143] [drm:skl_enable_dc6] Enabling DC6
>[   26.236154] [drm:gen9_set_dc_state] Setting DC state from 00 to 02
>[   28.101902] [drm:intel_power_well_enable] enabling DC off
>[   28.101920] [drm:gen9_set_dc_state] Setting DC state from 02 to 00
>[   32.235654] [drm:intel_power_well_disable] disabling DC off
>[   32.235670] [drm:skl_enable_dc6] Enabling DC6
>[   32.235682] [drm:gen9_set_dc_state] Setting DC state from 00 to 02
>[   33.151166] [drm:intel_power_well_enable] enabling DC off
>[   33.151179] [drm:gen9_set_dc_state] Setting DC state from 02 to 00
>[   34.245305] [drm:intel_backlight_device_get_brightness] get backlight PWM = 286
>[   43.040120] [drm:skl_compute_wm] [PLANE:45:cursor A]   level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5,*wm6,*wm7, twm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm
>[   43.040138] [drm:skl_compute_wm] [PLANE:45:cursor A]   lines    0,   2,   2,   3,   5,   6,   6,   7,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[   43.040150] [drm:skl_compute_wm] [PLANE:45:cursor A]  blocks    4,   6,   6,   8,  12,  14,  14,  16,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[   43.040161] [drm:skl_compute_wm] [PLANE:45:cursor A] min_ddb    5,   7,   7,   9,  13,  15,  15,  17,   0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0
>[   44.255787] [drm:intel_backlight_device_get_brightness] get backlight PWM = 286

Actions: View

Attachments on bug 110868: 144489

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.