Attachment 145023 Details for Bug 111371 – The non-verbose kernel log

The non-verbose kernel log

kernel_log.txt (text/plain), 12.60 KB, created by Jorge Natz on 2019-08-11 15:33:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jorge Natz

Created: 2019-08-11 15:33:56 UTC

Size: 12.60 KB

patch

obsolete

>[    1.694681] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
>[    1.704287] pci 0000:01:00.0: vgaarb: setting as boot VGA device
>[    1.704304] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>[    1.704315] pci 0000:01:00.0: vgaarb: bridge control possible
>[    1.704321] vgaarb: loaded
>[    1.705898] pps_core: LinuxPPS API ver. 1 registered
>[    1.705909] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    1.706133] PTP clock support registered
>[    1.709414] PCI: Using ACPI for IRQ routing
>[    1.709433] PCI: pci_cache_line_size set to 32 bytes
>[    1.709511] Expanded resource Reserved due to conflict with Adapter ROM
>[    1.709522] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
>[    1.709534] e820: reserve RAM buffer [mem 0x040fd800-0x07ffffff]
>[    1.712838] clocksource: Switched to clocksource tsc-early
>[    1.767795] VFS: Disk quotas dquot_6.6.0
>[    1.767937] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    1.768622] pnp: PnP ACPI init
>[    1.769605] system 00:00: [io  0x7000-0x700f] has been reserved
>[    1.769623] system 00:00: [io  0x8000-0x803f] has been reserved
>[    1.769641] system 00:00: [mem 0xfff80000-0xffffffff] has been reserved
>[    1.769884] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    1.771604] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    1.772656] pnp 00:02: [dma 2]
>[    1.773493] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
>[    1.776695] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
>[    1.780333] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
>[    1.782365] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
>[    1.782849] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
>[    1.782883] pnp: PnP ACPI: found 7 devices
>[    1.861277] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>[    1.862545] pci 0000:00:0d.0: BAR 6: assigned [mem 0x08000000-0x0801ffff pref]
>[    1.862577] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00010000 pref]
>[    1.862592] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00010000 pref]
>[    1.862608] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    1.862626] pci 0000:00:01.0:   bridge window [mem 0xf5000000-0xf5ffffff]
>[    1.862641] pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfcffffff pref]
>[    1.862664] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>[    1.862676] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
>[    1.862689] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf5ffffff]
>[    1.862701] pci_bus 0000:01: resource 2 [mem 0xfc000000-0xfcffffff pref]
>[    1.863127] NET: Registered protocol family 2
>[    1.864447] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
>[    1.864490] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
>[    1.864520] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
>[    1.864554] TCP: Hash tables configured (established 1024 bind 1024)
>[    1.864774] UDP hash table entries: 256 (order: 1, 8192 bytes)
>[    1.864818] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
>[    1.865101] NET: Registered protocol family 1
>[    1.865166] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
>[    1.866567] PCI Interrupt Link [LNKD] enabled at IRQ 9
>[    1.866577] PCI: setting IRQ 9 as level-triggered
>[    1.867057] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>[    1.867069] PCI: CLS 32 bytes, default 32
>[    1.867458] Trying to unpack rootfs image as initramfs...
>[    3.524378] Freeing initrd memory: 10300K
>[    3.534344] Initialise system trusted keyrings
>[    3.535405] workingset: timestamp_bits=30 max_order=15 bucket_order=0
>[    3.577647] Key type asymmetric registered
>[    3.577660] Asymmetric key parser 'x509' registered
>[    3.577761] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
>[    3.577789] io scheduler noop registered
>[    3.578048] io scheduler cfq registered (default)
>[    3.578059] io scheduler mq-deadline registered
>[    3.578065] io scheduler kyber registered
>[    3.579763] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[    3.579920] intel_idle: does not run on family 6 model 7
>[    3.580020] tsc: Marking TSC unstable due to TSC halts in idle
>[    3.580536] ERST DBG: ERST support is disabled.
>[    3.583580] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    3.604608] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[    3.607026] clocksource: Switched to clocksource acpi_pm
>[    3.644187] brd: module loaded
>[    3.645587] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MICE] at 0x60,0x64 irq 1,12
>[    3.650423] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    3.650865] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    3.653114] rtc_cmos 00:01: registered as rtc0
>[    3.653456] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
>[    3.654674] gre: GRE over IPv4 demultiplexor driver
>[    3.654724] Key type dns_resolver registered
>[    3.657078] microcode: sig=0x672, pf=0x1, revision=0x4
>[    3.657545] microcode: Microcode Update Driver: v2.2.
>[    3.657562] Using IPI No-Shortcut mode
>[    3.659572] registered taskstats version 1
>[    3.659581] Loading compiled-in X.509 certificates
>[    3.661659] rtc_cmos 00:01: setting system clock to 2019-08-10 20:55:05 UTC (1565470505)
>[    3.661950] Unstable clock detected, switching default tracing clock to "global"
>[    3.661950] If you want to keep using the local clock, then add:
>[    3.661950]   "trace_clock=local"
>[    3.661950] on the kernel command line
>[    3.670781] Freeing unused kernel image memory: 752K
>[    3.675487] Write protecting the kernel text: 4136k
>[    3.675670] Write protecting the kernel read-only data: 1944k
>[    3.675680] Run /init as init process
>[    3.676782] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    3.813890] loop: module loaded
>[    3.820863] squashfs: version 4.0 (2009/01/31) Phillip Lougher
>[    3.837047] SCSI subsystem initialized
>[    3.857695] ACPI: bus type USB registered
>[    3.858268] usbcore: registered new interface driver usbfs
>[    3.858677] usbcore: registered new interface driver hub
>[    3.858875] usbcore: registered new device driver usb
>[    3.867109] usbcore: registered new interface driver usb-storage
>[    4.140775] libata version 3.00 loaded.
>[    4.147872] ata_piix 0000:00:07.1: version 2.13
>[    4.154116] scsi host0: ata_piix
>[    4.156418] scsi host1: ata_piix
>[    4.156817] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x10a0 irq 14
>[    4.156830] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x10a8 irq 15
>[    4.312508] ata2.00: NODEV after polling detection
>[    4.314940] ata1.00: ATA-4: WDC AC36400L, 09.09M08, max UDMA/33
>[    4.314952] ata1.00: 12594960 sectors, multi 16: LBA 
>[    4.320789] scsi 0:0:0:0: Direct-Access     ATA      WDC AC36400L     9M08 PQ: 0 ANSI: 5
>[    4.323740] sd 0:0:0:0: [sda] 12594960 512-byte logical blocks: (6.45 GB/6.00 GiB)
>[    4.324465] sd 0:0:0:0: [sda] Write Protect is off
>[    4.324481] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    4.324734] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[    4.337550]  sda: sda1
>[    4.340388] sd 0:0:0:0: [sda] Attached SCSI disk
>[    4.356997] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    4.359948] ehci-pci: EHCI PCI platform driver
>[    4.368893] uhci_hcd: USB Universal Host Controller Interface driver
>[    4.369592] uhci_hcd 0000:00:07.2: UHCI Host Controller
>[    4.369672] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>[    4.369758] uhci_hcd 0000:00:07.2: irq 9, io base 0x00001080
>[    4.370511] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
>[    4.370525] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    4.370536] usb usb1: Product: UHCI Host Controller
>[    4.370546] usb usb1: Manufacturer: Linux 4.19.58-0-vanilla uhci_hcd
>[    4.370556] usb usb1: SerialNumber: 0000:00:07.2
>[    4.372014] hub 1-0:1.0: USB hub found
>[    4.372099] hub 1-0:1.0: 2 ports detected
>[    4.702018] usb 1-1: new full-speed USB device number 2 using uhci_hcd
>[    4.894939] usb 1-1: New USB device found, idVendor=125f, idProduct=db8a, bcdDevice=11.00
>[    4.894956] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    4.894967] usb 1-1: Product: ADATA USB Flash Drive
>[    4.894977] usb 1-1: Manufacturer: ADATA
>[    4.894987] usb 1-1: SerialNumber: 14B2103492230045
>[    4.900305] usb-storage 1-1:1.0: USB Mass Storage device detected
>[    4.909642] scsi host2: usb-storage 1-1:1.0
>[    4.911338] usbcore: registered new interface driver uas
>[    5.035370] usb 1-2: new full-speed USB device number 3 using uhci_hcd
>[    5.210881] usb 1-2: New USB device found, idVendor=1221, idProduct=3234, bcdDevice= 0.00
>[    5.210899] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    5.210909] usb 1-2: Product: Disk
>[    5.210919] usb 1-2: Manufacturer: USB
>[    5.210928] usb 1-2: SerialNumber: 00000000816B
>[    5.213185] usb-storage 1-2:1.0: USB Mass Storage device detected
>[    5.222820] scsi host3: usb-storage 1-2:1.0
>[    6.232909] scsi 3:0:0:0: Direct-Access     USB      Disk             2.60 PQ: 0 ANSI: 2
>[    6.482034] scsi 2:0:0:0: Direct-Access     ADATA    USB Flash Drive  1100 PQ: 0 ANSI: 6
>[    6.491828] sd 2:0:0:0: [sdb] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB)
>[    6.492807] sd 3:0:0:0: [sdc] 1030400 512-byte logical blocks: (528 MB/503 MiB)
>[    6.494824] sd 2:0:0:0: [sdb] Write Protect is off
>[    6.494840] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
>[    6.495775] sd 3:0:0:0: [sdc] Write Protect is off
>[    6.495790] sd 3:0:0:0: [sdc] Mode Sense: 0b 00 00 08
>[    6.497777] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    6.498949] sd 3:0:0:0: [sdc] No Caching mode page found
>[    6.498964] sd 3:0:0:0: [sdc] Assuming drive cache: write through
>[    6.527871]  sdc: sdc1
>[    6.528421]  sdb: sdb1 sdb2
>[    6.546833] sd 3:0:0:0: [sdc] Attached SCSI removable disk
>[    6.546892] sd 2:0:0:0: [sdb] Attached SCSI removable disk
>[    8.816477] random: crng init done
>[    9.507345] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>[   10.996122] ISO 9660 Extensions: Microsoft Joliet Level 3
>[   11.006120] ISO 9660 Extensions: RRIP_1991A
>[   99.956057] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[   99.956185] ACPI: Power Button [PWRF]
>[  100.185464] parport_pc 00:04: reported by Plug and Play ACPI
>[  100.185827] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
>[  100.775282] Floppy drive(s): fd0 is 1.44M
>[  100.795882] FDC 0 is a post-1991 82077
>[  102.073914] PCI Interrupt Link [LNKA] enabled at IRQ 11
>[  102.073927] PCI: setting IRQ 11 as level-triggered
>[  102.073986] 3c59x: Donald Becker and others.
>[  102.074039] 0000:00:0d.0: 3Com PCI 3c905C Tornado at 22f395e5.
>[  102.583084] Linux agpgart interface v0.103
>[  103.927350] nouveau 0000:01:00.0: NVIDIA NV04 (20044001)
>[  103.927615] nouveau 0000:01:00.0: pci: failed to acquire agp
>[  103.928356] nouveau 0000:01:00.0: bios: OOB 4 00003b6f 00003b6f
>[  103.930212] nouveau 0000:01:00.0: bios: OOB 4 00003b6f 00003b6f
>[  103.932092] nouveau 0000:01:00.0: bios: OOB 4 00003b6f 00003b6f
>[  103.932122] nouveau 0000:01:00.0: bios: unable to locate usable image
>[  103.932144] nouveau 0000:01:00.0: bios ctor failed, -22
>[  103.932191] nouveau: probe of 0000:01:00.0 failed with error -22
>[  104.539852] PCI Interrupt Link [LNKB] enabled at IRQ 10
>[  104.539866] PCI: setting IRQ 10 as level-triggered
>[  104.540004] snd_au8830 0000:00:0e.0: init started
>[  105.376950] snd_au8830 0000:00:0e.0: control 3:0:0:Playback PCM advanced processing:0 is already present
>[  105.377184] snd_au8830 0000:00:0e.0: init.... done.
>[  105.672851] piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x7000, revision 0
>[  105.785689] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
>[  105.809433] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
>[  105.915818] input: PC Speaker as /devices/platform/pcspkr/input/input3
>[  106.988052] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
>[  107.422462] mousedev: PS/2 mouse device common for all mice
>[  108.812216] NET: Registered protocol family 17
>[  109.068475] NET: Registered protocol family 10
>[  109.093795] Segment Routing with IPv6
>[  169.017710] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>[  169.116761] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

Actions: View

Attachments on bug 111371: 145023 | 145024 | 145025 | 145030 | 145031 | 145034 | 145039 | 145040

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.