Attachment 145034 Details for Bug 111371 – Fetch workaround kernel log

Fetch workaround kernel log

dmesg_workaround.txt (text/plain), 25.80 KB, created by Jorge Natz on 2019-08-12 03:26:39 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jorge Natz

Created: 2019-08-12 03:26:39 UTC

Size: 25.80 KB

patch

obsolete

>Linux version 4.19.10-tinycore (tc@box) (gcc version 8.2.0 (GCC)) #1999 SMP Tue Dec 18 13:36:47 UTC 2018
>x86/fpu: x87 FPU will use FXSAVE
>BIOS-provided physical RAM map:
>BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
>BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
>BIOS-e820: [mem 0x00000000000e6c00-0x00000000000fffff] reserved
>BIOS-e820: [mem 0x0000000000100000-0x00000000040fd7ff] usable
>BIOS-e820: [mem 0x00000000040fd800-0x00000000040ff7ff] ACPI data
>BIOS-e820: [mem 0x00000000040ff800-0x00000000040ffbff] ACPI NVS
>BIOS-e820: [mem 0x00000000040ffc00-0x0000000007ffffff] usable
>BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
>Notice: NX (Execute Disable) protection missing in CPU!
>SMBIOS 2.1 present.
>DMI: Dell Computer Corporation XPST500/SE440BX-3, BIOS 4S4EB2X0.10A.0017.P05 04/22/1999
>tsc: Fast TSC calibration using PIT
>tsc: Detected 498.888 MHz processor
>e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>e820: remove [mem 0x000a0000-0x000fffff] usable
>last_pfn = 0x8000 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CBFFF write-protect
>  CC000-DFFFF uncachable
>  E0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask FF8000000 write-back
>  1 disabled
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86/PAT: PAT not supported by CPU.
>x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
>initial memory mapped: [mem 0x00000000-0x00bfffff]
>Base memory trampoline at [(ptrval)] 9b000 size 16384
>RAMDISK: [mem 0x03827000-0x040dcfff]
>ACPI: Early table checksum verification disabled
>ACPI: RSDP 0x00000000000F6B80 000014 (v00 PTLTD )
>ACPI: RSDT 0x00000000040FDB3C 000028 (v01 PTLTD    RSDT   00000000 PTL  01000000)
>ACPI: FACP 0x00000000040FF78C 000074 (v01 DELL   KUBLAI   19990409 PTL  000F4240)
>ACPI: DSDT 0x00000000040FDB64 001C28 (v01 Intel  S2440BX  00000000 MSFT 01000004)
>ACPI: FACS 0x00000000040FFBC0 000040
>0MB HIGHMEM available.
>128MB LOWMEM available.
>  mapped low ram: 0 - 08000000
>  low ram: 0 - 08000000
>BRK [0x00937000, 0x00937fff] PGTABLE
>Zone ranges:
>  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>  Normal   [mem 0x0000000001000000-0x0000000007ffffff]
>  HighMem  empty
>Movable zone start for each node
>Early memory node ranges
>  node   0: [mem 0x0000000000001000-0x000000000009efff]
>  node   0: [mem 0x0000000000100000-0x00000000040fcfff]
>  node   0: [mem 0x0000000004100000-0x0000000007ffffff]
>Initmem setup node 0 [mem 0x0000000000001000-0x0000000007ffffff]
>On node 0 totalpages: 32667
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3998 pages, LIFO batch:0
>  Normal zone: 224 pages used for memmap
>  Normal zone: 28669 pages, LIFO batch:7
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x8008
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>APIC: disable apic facility
>APIC: switched to apic NOOP
>smpboot: Allowing 1 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
>PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
>PM: Registered nosave memory: [mem 0x000a0000-0x000e6fff]
>PM: Registered nosave memory: [mem 0x000e7000-0x000fffff]
>PM: Registered nosave memory: [mem 0x040fd000-0x040fdfff]
>PM: Registered nosave memory: [mem 0x040fe000-0x040fefff]
>PM: Registered nosave memory: [mem 0x040ff000-0x040fffff]
>PM: Registered nosave memory: [mem 0x040ff000-0x040fffff]
>[mem 0x08000000-0xfff7ffff] available for PCI devices
>Booting paravirtualized kernel on bare hardware
>clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
>setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
>percpu: Embedded 28 pages/cpu @(ptrval) s84812 r0 d29876 u114688
>pcpu-alloc: s84812 r0 d29876 u114688 alloc=28*4096
>pcpu-alloc: [0] 0 
>Built 1 zonelists, mobility grouping on.  Total pages: 32411
>Kernel command line: loglevel=3 waitusb=5 initrd=/boot/core.gz BOOT_IMAGE=/boot/vmlinuz 
>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
>BRK [0x00938000, 0x00938fff] PGTABLE
>Initializing CPU#0
>Initializing HighMem for node 0 (00000000:00000000)
>Memory: 111992K/130668K available (5401K kernel code, 419K rwdata, 1380K rodata, 656K init, 464K bss, 18676K reserved, 0K cma-reserved, 0K highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
>  cpu_entry : 0xff800000 - 0xff939000   (1252 kB)
>    pkmap   : 0xff000000 - 0xff400000   (4096 kB)
>    vmalloc : 0xc8800000 - 0xfeffe000   ( 871 MB)
>    lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
>      .init : 0xc0816000 - 0xc08ba000   ( 656 kB)
>      .data : 0xc0646490 - 0xc080bf80   (1814 kB)
>      .text : 0xc0100000 - 0xc0646490   (5401 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>rcu: Hierarchical RCU implementation.
>rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
>rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
>NR_IRQS: 2304, nr_irqs: 32, preallocated irqs: 16
>CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
>Console: colour VGA+ 80x25
>console [tty0] enabled
>ACPI: Core revision 20180810
>ACPI: setting ELCR to 0200 (from 0e00)
>APIC: Keep in PIC mode(8259)
>clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xe61e221ad7, max_idle_ns: 881590438218 ns
>Calibrating delay loop (skipped), value calculated using timer frequency.. 998.35 BogoMIPS (lpj=1662960)
>pid_max: default: 32768 minimum: 301
>Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
>Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
>mce: CPU supports 5 MCE banks
>Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
>Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
>Spectre V2 : Mitigation: Full generic retpoline
>Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
>Speculative Store Bypass: Vulnerable
>L1TF: Kernel not compiled for PAE. No mitigation for L1TF
>Freeing SMP alternatives memory: 20K
>smpboot: weird, boot CPU (#0) not listed by the BIOS
>smpboot: SMP disabled
>Performance Events: 
>no APIC, boot with the "lapic" boot parameter to force-enable it.
>no hardware sampling interrupt available.
>p6 PMU driver.
>... version:                0
>... bit width:              32
>... generic registers:      2
>... value mask:             00000000ffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   0
>... event mask:             0000000000000003
>rcu: Hierarchical SRCU implementation.
>smp: Bringing up secondary CPUs ...
>smp: Brought up 1 node, 1 CPU
>smpboot: Max logical packages: 1
>smpboot: Total of 1 processors activated (998.35 BogoMIPS)
>random: get_random_u32 called from 0xc033b4cd with crng_init=0
>PM: Registering ACPI NVS region [mem 0x040ff800-0x040ffbff] (1024 bytes)
>clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
>futex hash table entries: 256 (order: 2, 16384 bytes)
>pinctrl core: initialized pinctrl subsystem
>NET: Registered protocol family 16
>cpuidle: using governor ladder
>cpuidle: using governor menu
>clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
>ACPI: bus type PCI registered
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>PCI: PCI BIOS revision 2.10 entry at 0xfd993, last bus=1
>PCI: Using configuration type 1 for base access
>cryptd: max_cpu_qlen set to 1000
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: Added _OSI(Linux-Dell-Video)
>ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
>ACPI: 1 ACPI AML tables successfully acquired and loaded
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S5)
>ACPI: Using PIC for interrupt routing
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: Enabled 4 GPEs in block 00 to 0F
>ACPI: Power Resource [PFAN] (on)
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
>acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
>acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
>acpi PNP0A03:00: host bridge window [io  0x0cf8-0x0cff] (ignored)
>acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)
>acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff window] (ignored)
>acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
>acpi PNP0A03:00: host bridge window [mem 0x000cc000-0x000dffff window] (ignored)
>acpi PNP0A03:00: host bridge window [mem 0x08000000-0xffdfffff window] (ignored)
>acpi PNP0A03:00: host bridge window [mem 0xfff80000-0xffffffff window] (ignored)
>PCI: root bus 00: using default resources
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
>pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
>pci_bus 0000:00: root bus resource [bus 00-ff]
>pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
>pci 0000:00:00.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
>pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
>pci 0000:00:07.0: [8086:7110] type 00 class 0x060100
>pci 0000:00:07.1: [8086:7111] type 00 class 0x010180
>pci 0000:00:07.1: reg 0x20: [io  0x10a0-0x10af]
>pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
>pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
>pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
>pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
>pci 0000:00:07.2: [8086:7112] type 00 class 0x0c0300
>pci 0000:00:07.2: reg 0x20: [io  0x1080-0x109f]
>pci 0000:00:07.3: [8086:7113] type 00 class 0x068000
>* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
>* this clock source is slow. Consider trying other clock sources
>pci 0000:00:07.3: quirk: [io  0x8000-0x803f] claimed by PIIX4 ACPI
>pci 0000:00:07.3: quirk: [io  0x7000-0x700f] claimed by PIIX4 SMB
>pci 0000:00:0d.0: [10b7:9200] type 00 class 0x020000
>pci 0000:00:0d.0: reg 0x10: [io  0x1000-0x107f]
>pci 0000:00:0d.0: reg 0x14: [mem 0xf4040000-0xf404007f]
>pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:00:0d.0: supports D1 D2
>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0e.0: [12eb:0002] type 00 class 0x040100
>pci 0000:00:0e.0: reg 0x10: [mem 0xf4000000-0xf403ffff]
>pci 0000:00:0e.0: reg 0x14: [io  0x10b8-0x10bf]
>pci 0000:00:0e.0: reg 0x18: [io  0x10b0-0x10b7]
>pci 0000:00:0e.0: supports D2
>pci_bus 0000:01: extended config space not accessible
>pci 0000:01:00.0: [10de:0020] type 00 class 0x030000
>pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
>pci 0000:01:00.0: reg 0x14: [mem 0xfc000000-0xfcffffff pref]
>pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
>pci 0000:00:01.0: PCI bridge to [bus 01]
>pci 0000:00:01.0:   bridge window [mem 0xf5000000-0xf5ffffff]
>pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfcffffff pref]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
>pci 0000:01:00.0: vgaarb: setting as boot VGA device
>pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
>pci 0000:01:00.0: vgaarb: bridge control possible
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>ACPI: bus type USB registered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>videodev: Linux video capture interface: v2.00
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 32 bytes
>Expanded resource Reserved due to conflict with Adapter ROM
>e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
>e820: reserve RAM buffer [mem 0x040fd800-0x07ffffff]
>clocksource: Switched to clocksource tsc-early
>pnp: PnP ACPI init
>system 00:00: [io  0x7000-0x700f] has been reserved
>system 00:00: [io  0x8000-0x803f] has been reserved
>system 00:00: [mem 0xfff80000-0xffffffff] has been reserved
>system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:02: [dma 2]
>pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
>pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
>pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
>pnp: PnP ACPI: found 7 devices
>PnPBIOS: Disabled
>clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
>pci 0000:00:0d.0: BAR 6: assigned [mem 0x08000000-0x0801ffff pref]
>pci 0000:01:00.0: BAR 6: no space for [mem size 0x00010000 pref]
>pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00010000 pref]
>pci 0000:00:01.0: PCI bridge to [bus 01]
>pci 0000:00:01.0:   bridge window [mem 0xf5000000-0xf5ffffff]
>pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfcffffff pref]
>pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf5ffffff]
>pci_bus 0000:01: resource 2 [mem 0xfc000000-0xfcffffff pref]
>NET: Registered protocol family 2
>tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
>TCP established hash table entries: 1024 (order: 0, 4096 bytes)
>TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
>TCP: Hash tables configured (established 1024 bind 1024)
>UDP hash table entries: 256 (order: 1, 8192 bytes)
>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
>NET: Registered protocol family 1
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:00:00.0: Limiting direct PCI/PCI transfers
>PCI Interrupt Link [LNKD] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
>PCI: CLS 32 bytes, default 32
>Trying to unpack rootfs image as initramfs...
>random: fast init done
>Freeing initrd memory: 8920K
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>workingset: timestamp_bits=30 max_order=15 bucket_order=0
>NFS: Registering the id_resolver key type
>Key type id_resolver registered
>Key type id_legacy registered
>nfs4filelayout_init: NFSv4 File Layout Driver Registering...
>fuse init (API version 7.27)
>pstore: using deflate compression
>NET: Registered protocol family 38
>Key type asymmetric registered
>Asymmetric key parser 'x509' registered
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
>io scheduler noop registered
>io scheduler deadline registered (default)
>io scheduler mq-deadline registered (default)
>io scheduler kyber registered
>intel_idle: does not run on family 6 model 7
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>tsc: Marking TSC unstable due to TSC halts in idle
>clocksource: Switched to clocksource acpi_pm
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>isapnp: Scanning for PnP cards...
>Non-volatile memory driver v1.3
>Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
>brd: module loaded
>mtip32xx Version 1.3.1
>zram: Added device: zram0
>VMware PVSCSI driver - version 1.0.7.0-k
>ata_piix 0000:00:07.1: version 2.13
>scsi host0: ata_piix
>scsi host1: ata_piix
>ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x10a0 irq 14
>ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x10a8 irq 15
>libphy: Fixed MDIO Bus: probed
>tun: Universal TUN/TAP device driver, 1.6
>PPP generic driver version 2.4.2
>PPP Deflate Compression module registered
>NET: Registered protocol family 24
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci-pci: EHCI PCI platform driver
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci-pci: OHCI PCI platform driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 9, io base 0x00001080
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>usbcore: registered new interface driver uas
>usbcore: registered new interface driver usb-storage
>usbcore: registered new interface driver ums-alauda
>usbcore: registered new interface driver ums-cypress
>usbcore: registered new interface driver ums-datafab
>usbcore: registered new interface driver ums_eneub6250
>usbcore: registered new interface driver ums-freecom
>usbcore: registered new interface driver ums-isd200
>usbcore: registered new interface driver ums-jumpshot
>usbcore: registered new interface driver ums-karma
>usbcore: registered new interface driver ums-onetouch
>usbcore: registered new interface driver ums-sddr09
>usbcore: registered new interface driver ums-sddr55
>usbcore: registered new interface driver ums-usbat
>i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MICE] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>usbcore: registered new interface driver appletouch
>usbcore: registered new interface driver bcm5974
>usbcore: registered new interface driver synaptics_usb
>rtc_cmos 00:01: registered as rtc0
>rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
>intel_powerclamp: CPU does not support MWAIT
>softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
>ledtrig-cpu: registered to indicate activity on CPUs
>Driver for HIFN 795x crypto accelerator chip has been successfully registered.
>hidraw: raw HID events driver (C) Jiri Kosina
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>ipip: IPv4 and MPLS over IPv4 tunneling driver
>IPv4 over IPsec tunneling driver
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>Key type dns_resolver registered
>microcode: sig=0x672, pf=0x1, revision=0x4
>microcode: Microcode Update Driver: v2.2.
>Using IPI No-Shortcut mode
>registered taskstats version 1
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>ata1.00: ATA-4: WDC AC36400L, 09.09M08, max UDMA/33
>ata1.00: 12594960 sectors, multi 16: LBA 
>ata2.00: ATAPI: SAMSUNG SC-140B,     d003, max UDMA/33, CDB intr
>Key type encrypted registered
>rtc_cmos 00:01: setting system clock to 2019-08-11 23:36:10 UTC (1565566570)
>isapnp: No Plug & Play device found
>scsi 0:0:0:0: Direct-Access     ATA      WDC AC36400L     9M08 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 12594960 512-byte logical blocks: (6.45 GB/6.00 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: CD-ROM            SAMSUNG  CD-ROM SC-140B   d003 PQ: 0 ANSI: 5
> sda: sda1
>sd 0:0:0:0: [sda] Attached SCSI disk
>sr 1:0:0:0: [sr0] scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>Freeing unused kernel image memory: 656K
>Write protecting the kernel text: 5404k
>Write protecting the kernel read-only data: 1392k
>Run /init as init process
>usb 1-1: new full-speed USB device number 2 using uhci_hcd
>usb-storage 1-1:1.0: USB Mass Storage device detected
>scsi host2: usb-storage 1-1:1.0
>usb 1-2: new full-speed USB device number 3 using uhci_hcd
>usb-storage 1-2:1.0: USB Mass Storage device detected
>scsi host3: usb-storage 1-2:1.0
>input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
>scsi 2:0:0:0: Direct-Access     USB      Disk             2.60 PQ: 0 ANSI: 2
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 2:0:0:0: [sdb] 1030400 512-byte logical blocks: (528 MB/503 MiB)
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08
>sd 2:0:0:0: [sdb] No Caching mode page found
>sd 2:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 2:0:0:0: [sdb] Attached SCSI removable disk
>PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>3c59x: Donald Becker and others.
>0000:00:0d.0: 3Com PCI 3c905C Tornado at (ptrval).
>input: PC Speaker as /devices/platform/pcspkr/input/input4
>scsi 3:0:0:0: Direct-Access     Lexar    USB Flash Drive  1100 PQ: 0 ANSI: 4
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>sd 3:0:0:0: [sdc] 31258624 512-byte logical blocks: (16.0 GB/14.9 GiB)
>sd 3:0:0:0: [sdc] Write Protect is off
>sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00
>sd 3:0:0:0: [sdc] No Caching mode page found
>sd 3:0:0:0: [sdc] Assuming drive cache: write through
> sdc: sdc1
>sd 3:0:0:0: [sdc] Attached SCSI removable disk
>parport_pc 00:04: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ppdev: user-space parallel port driver
>loop: module loaded
>zram0: detected capacity change from 0 to 24133632
>random: mkswap: uninitialized urandom read (16 bytes read)
>Adding 23564k swap on /dev/zram0.  Priority:-2 extents:1 across:23564k SSFS
>squashfs: version 4.0 (2009/01/31) Phillip Lougher
>random: crng init done
>FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 440BX Chipset
>agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
>piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x7000, revision 0
>drm: loading out-of-tree module taints kernel.
>nouveau 0000:01:00.0: NVIDIA NV04 (20044001)
>nouveau 0000:01:00.0: bios: version 30.2e.8e.7e.00
>nouveau 0000:01:00.0: bios: DCB table not found
>nouveau 0000:01:00.0: bios: DCB table not found
>nouveau 0000:01:00.0: bios: DCB table not found
>nouveau 0000:01:00.0: bios: DCB table not found
>agpgart-intel 0000:00:00.0: AGP 1.0 bridge
>agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x mode
>nouveau 0000:01:00.0: putting AGP V2 device into 2x mode
>nouveau 0000:01:00.0: tmr: unknown input clock freq
>nouveau 0000:01:00.0: fb: 16 MiB SDRAM
>[TTM] Zone  kernel: Available graphics memory: 60794 kiB
>[TTM] Initializing pool allocator
>[TTM] Initializing DMA pool allocator
>nouveau 0000:01:00.0: DRM: VRAM: 15 MiB
>nouveau 0000:01:00.0: DRM: GART: 64 MiB
>nouveau 0000:01:00.0: DRM: BMP version 0.1
>nouveau 0000:01:00.0: DRM: No DCB data found in VBIOS
>nouveau 0000:01:00.0: bios: DCB table not found
>nouveau 0000:01:00.0: DRM: Saving VGA fonts
>nouveau 0000:01:00.0: DRM: No DCB data found in VBIOS
>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[drm] Driver supports precise vblank timestamp query.
>nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
>nouveau 0000:01:00.0: gr: intr 00000001 [NOTIFY] nsource 00000040 [ILLEGAL_MTHD] nstatus 00004000 [PROTECTION_FAULT] ch 0 [DRM] subc 2 class 005f mthd 019c data 000018a6
>nouveau 0000:01:00.0: gr: intr 00000001 [NOTIFY] nsource 00000040 [ILLEGAL_MTHD] nstatus 00004000 [PROTECTION_FAULT] ch 0 [DRM] subc 2 class 005f mthd 02fc data 00000003
>nouveau 0000:01:00.0: gr: intr 00000001 [NOTIFY] nsource 00000040 [ILLEGAL_MTHD] nstatus 00004000 [PROTECTION_FAULT] ch 0 [DRM] subc 3 class 004a mthd 0198 data 000018a6
>nouveau 0000:01:00.0: gr: intr 00000001 [NOTIFY] nsource 00000040 [ILLEGAL_MTHD] nstatus 00004000 [PROTECTION_FAULT] ch 0 [DRM] subc 3 class 004a mthd 0188 data 000018a9
>nouveau 0000:01:00.0: gr: intr 00000001 [NOTIFY] nsource 00000040 [ILLEGAL_MTHD] nstatus 00004000 [PROTECTION_FAULT] ch 0 [DRM] subc 3 class 004a mthd 018c data 000018a8
>nouveau 0000:01:00.0: gr: intr 00000001 [NOTIFY] nsource 00000040 [ILLEGAL_MTHD] nstatus 00004000 [PROTECTION_FAULT] ch 0 [DRM] subc 3 class 004a mthd 02fc data 00000003
>nouveau 0000:01:00.0: gr: intr 00000001 [NOTIFY] nsource 00000040 [ILLEGAL_MTHD] nstatus 00004000 [PROTECTION_FAULT] ch 0 [DRM] subc 3 class 004a mthd 02fc data 00000003
>nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x4000, bo 219d5324
>[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
>BUG: unable to handle kernel NULL pointer dereference at 00000004
>*pde = 00000000 
>Oops: 0000 [#1] SMP
>CPU: 0 PID: 20 Comm: kworker/0:1 Tainted: G           O      4.19.10-tinycore #1999
>Hardware name: Dell Computer Corporation XPST500/SE440BX-3, BIOS 4S4EB2X0.10A.0017.P05 04/22/1999
>Workqueue: events 0xc8e8a091
>EIP: 0xc8e94911
>Code: c8 51 ff 70 14 68 29 98 e9 c8 6a 04 e8 75 0e 04 00 8b 45 e0 83 c4 10 8a 04 18 43 09 c7 eb a1 89 fb 31 c0 84 db 74 2d 8b 46 3c <8b> 58 04 85 db 75 2a eb 4c 8b 56 38 8b 14 82 8b 0a 31 d2 80 b9 e8
>EAX: 00000000 EBX: 00000000 ECX: c2142a00 EDX: c2142a1c
>ESI: c33ae800 EDI: 00000000 EBP: c789fedc ESP: c789fe84
>DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010207
>CR0: 80050033 CR2: 00000004 CR3: 03304000 CR4: 000006d0
>Call Trace:
> ? 0xc06431c6
> ? 0xc064207b
> ? 0xc06413f2
> ? 0xc0641a94
> ? 0xc8e93004
> 0xc8e952fd
> 0xc91950c3
> 0xc8e8a066
> 0xc8e8a194
> ? 0xc01585c1
> 0xc015150b
> 0xc0151904
> 0xc0154e68
> ? 0xc01517a3
> ? 0xc0154d9c
> 0xc064347e
>Modules linked in: nouveau(O) drm_kms_helper fb_sys_fops syscopyarea sysfillrect sysimgblt ttm drm(O) mxm_wmi wmi video backlight i2c_algo_bit i2c_piix4 intel_agp intel_gtt agpgart squashfs zstd_decompress xxhash loop ppdev parport_pc floppy parport pcspkr 3c59x mii
>CR2: 0000000000000004
>---[ end trace ee748d543266319a ]---
>EIP: 0xc8e94911
>Code: c8 51 ff 70 14 68 29 98 e9 c8 6a 04 e8 75 0e 04 00 8b 45 e0 83 c4 10 8a 04 18 43 09 c7 eb a1 89 fb 31 c0 84 db 74 2d 8b 46 3c <8b> 58 04 85 db 75 2a eb 4c 8b 56 38 8b 14 82 8b 0a 31 d2 80 b9 e8
>EAX: 00000000 EBX: 00000000 ECX: c2142a00 EDX: c2142a1c
>ESI: c33ae800 EDI: 00000000 EBP: c789fedc ESP: c08c54bc
>DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010207
>CR0: 80050033 CR2: 00000004 CR3: 03304000 CR4: 000006d0
>eth0:  setting full-duplex.

Actions: View

Attachments on bug 111371: 145023 | 145024 | 145025 | 145030 | 145031 | 145034 | 145039 | 145040

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.