Attachment 15758 Details for Bug 15360 – dmesg output with 2GB RAM

dmesg output with 2GB RAM

dmesg.2G.txt (text/plain), 32.64 KB, created by Mika Fischer on 2008-04-08 03:37:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mika Fischer

Created: 2008-04-08 03:37:59 UTC

Size: 32.64 KB

patch

obsolete

>[    0.000000] Linux version 2.6.24-15-generic (buildd@rothera) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Apr 4 03:48:31 UTC 2008 (Ubuntu 2.6.24-15.26-generic)
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
>[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
>[    0.000000]  BIOS-e820: 000000007f6d0000 - 000000007f6e3000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 000000007f6e3000 - 0000000080000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>[    0.000000] 1142MB HIGHMEM available.
>[    0.000000] 896MB LOWMEM available.
>[    0.000000] found SMP MP-table at 000f6e10
>[    0.000000] Entering add_active_range(0, 0, 521936) 0 entries of 256 used
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA             0 ->     4096
>[    0.000000]   Normal       4096 ->   229376
>[    0.000000]   HighMem    229376 ->   521936
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[1] active PFN ranges
>[    0.000000]     0:        0 ->   521936
>[    0.000000] On node 0 totalpages: 521936
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1760 pages used for memmap
>[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 2285 pages used for memmap
>[    0.000000]   HighMem zone: 290275 pages, LIFO batch:31
>[    0.000000]   Movable zone: 0 pages used for memmap
>[    0.000000] DMI present.
>[    0.000000] ACPI: RSDP signature @ 0xC00F6DE0 checksum 0
>[    0.000000] ACPI: RSDP 000F6DE0, 0024 (r2 PTLTD )
>[    0.000000] ACPI: XSDT 7F6D71D0, 00A4 (r1 SECCSD LH43STAR  6040000  LTP        0)
>[    0.000000] ACPI: FACP 7F6DFB6F, 00F4 (r3 INTEL  CRESTLNE  6040000 ALAN        1)
>[    0.000000] ACPI: DSDT 7F6D9189, 6972 (r2 INTEL  CRESTLNE  6040000 INTL 20050624)
>[    0.000000] ACPI: FACS 7F6E2FC0, 0040
>[    0.000000] ACPI: APIC 7F6DFC63, 0068 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
>[    0.000000] ACPI: HPET 7F6DFCCB, 0038 (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
>[    0.000000] ACPI: MCFG 7F6DFD03, 003C (r1 INTEL  CRESTLNE  6040000 LOHR       5A)
>[    0.000000] ACPI: TCPA 7F6DFD3F, 0032 (r1 Intel   CRESTLN  6040000          5A52)
>[    0.000000] ACPI: TMOR 7F6DFD71, 0026 (r1 PTLTD            6040000 PTL         3)
>[    0.000000] ACPI: APIC 7F6DFD97, 0068 (r1 PTLTD  	 APIC    6040000  LTP        0)
>[    0.000000] ACPI: BOOT 7F6DFDFF, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>[    0.000000] ACPI: ASF! 7F6DFE27, 0063 (r16   CETP     CETP  6040000 PTL         1)
>[    0.000000] ACPI: SLIC 7F6DFE8A, 0176 (r1 SECCSD LH43STAR  6040000  LTP        0)
>[    0.000000] ACPI: SSDT 7F6D8B3A, 064F (r1 SataRe  SataPri     1000 INTL 20050624)
>[    0.000000] ACPI: SSDT 7F6D84A8, 0692 (r1 SataRe  SataSec     1000 INTL 20050624)
>[    0.000000] ACPI: SSDT 7F6D846F, 0039 (r1 BrtRef  DD01BRT     1000 INTL 20050624)
>[    0.000000] ACPI: SSDT 7F6D7800, 025F (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
>[    0.000000] ACPI: SSDT 7F6D775A, 00A6 (r1  PmRef  Cpu1Tst     3000 INTL 20050624)
>[    0.000000] ACPI: SSDT 7F6D7274, 04E6 (r1  PmRef    CpuPm     3000 INTL 20050624)
>[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
>[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>[    0.000000] ACPI: DMI detected: Samsung
>[    0.000000] ACPI: PM-Timer IO Port: 0x1008
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] Processor #0 6:15 APIC version 20
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>[    0.000000] Processor #1 6:15 APIC version 20
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
>[    0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517859
>[    0.000000] Kernel command line: root=UUID=06e54b2b-70cb-4346-9c4e-8c732179ffc8 ro quiet splash
>[    0.000000] mapped APIC to ffffb000 (fee00000)
>[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
>[    0.000000] Enabling fast FPU save and restore... done.
>[    0.000000] Enabling unmasked SIMD FPU exception support... done.
>[    0.000000] Initializing CPU#0
>[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
>[    0.000000] Detected 1995.047 MHz processor.
>[   14.373312] Console: colour VGA+ 80x25
>[   14.373316] console [tty0] enabled
>[   14.373674] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[   14.373983] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[   14.453296] Memory: 2057652k/2087744k available (2164k kernel code, 28896k reserved, 1006k data, 364k init, 1170240k highmem)
>[   14.453303] virtual kernel memory layout:
>[   14.453304]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
>[   14.453305]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>[   14.453306]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>[   14.453307]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>[   14.453307]       .init : 0xc041f000 - 0xc047a000   ( 364 kB)
>[   14.453308]       .data : 0xc031d2ad - 0xc0418dc4   (1006 kB)
>[   14.453309]       .text : 0xc0100000 - 0xc031d2ad   (2164 kB)
>[   14.453312] Checking if this processor honours the WP bit even in supervisor mode... Ok.
>[   14.453353] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
>[   14.453481] hpet clockevent registered
>[   14.533442] Calibrating delay using timer specific routine.. 3994.42 BogoMIPS (lpj=7988841)
>[   14.533464] Security Framework initialized
>[   14.533470] SELinux:  Disabled at boot.
>[   14.533482] AppArmor: AppArmor initialized
>[   14.533486] Failure registering capabilities with primary security module.
>[   14.533493] Mount-cache hash table entries: 512
>[   14.533610] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000001
>[   14.533618] monitor/mwait feature present.
>[   14.533619] using mwait in idle threads.
>[   14.533622] CPU: L1 I cache: 32K, L1 D cache: 32K
>[   14.533624] CPU: L2 cache: 2048K
>[   14.533627] CPU: Physical Processor ID: 0
>[   14.533628] CPU: Processor Core ID: 0
>[   14.533629] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000001
>[   14.533638] Compat vDSO mapped to ffffe000.
>[   14.533650] Checking 'hlt' instruction... OK.
>[   14.549765] SMP alternatives: switching to UP code
>[   14.551161] Early unpacking initramfs... done
>[   14.846518] ACPI: Core revision 20070126
>[   14.846557] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
>[   14.857907] CPU0: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
>[   14.857920] SMP alternatives: switching to SMP code
>[   14.858519] Booting processor 1/1 eip 3000
>[   14.868691] Initializing CPU#1
>[   14.949206] Calibrating delay using timer specific routine.. 3990.05 BogoMIPS (lpj=7980100)
>[   14.949212] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000001
>[   14.949216] monitor/mwait feature present.
>[   14.949219] CPU: L1 I cache: 32K, L1 D cache: 32K
>[   14.949221] CPU: L2 cache: 2048K
>[   14.949222] CPU: Physical Processor ID: 0
>[   14.949223] CPU: Processor Core ID: 1
>[   14.949225] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000001
>[   14.949734] CPU1: Intel(R) Core(TM)2 Duo CPU     T7250  @ 2.00GHz stepping 0d
>[   14.949754] Total of 2 processors activated (7984.47 BogoMIPS).
>[   14.949922] ENABLING IO-APIC IRQs
>[   14.950109] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>[   15.097220] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>[   15.117221] Brought up 2 CPUs
>[   15.117242] CPU0 attaching sched-domain:
>[   15.117244]  domain 0: span 03
>[   15.117246]   groups: 01 02
>[   15.117249] CPU1 attaching sched-domain:
>[   15.117250]  domain 0: span 03
>[   15.117251]   groups: 02 01
>[   15.117429] net_namespace: 64 bytes
>[   15.117439] Booting paravirtualized kernel on bare hardware
>[   15.117848] Time: 12:30:48  Date: 04/08/08
>[   15.117891] NET: Registered protocol family 16
>[   15.118043] EISA bus registered
>[   15.118047] ACPI: bus type pci registered
>[   15.118199] PCI: PCI BIOS revision 2.10 entry at 0xfd845, last bus=5
>[   15.118201] PCI: Using configuration type 1
>[   15.118203] Setting up standard PCI resources
>[   15.120303] ACPI: EC: Look up EC in DSDT
>[   15.121904] ACPI: BIOS _OSI(Linux) query ignored via DMI
>[   15.124448] ACPI: Interpreter enabled
>[   15.124451] ACPI: (supports S0 S3 S4 S5)
>[   15.124463] ACPI: Using IOAPIC for interrupt routing
>[   15.124694] ACPI: EC: non-query interrupt received, switching to interrupt mode
>[   15.130123] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>[   15.130126] ACPI: EC: driver started in interrupt mode
>[   15.130161] ACPI: PCI Root Bridge [PCI0] (0000:00)
>[   15.131108] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>[   15.131112] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>[   15.132349] PCI: Transparent bridge - 0000:00:1e.0
>[   15.132426] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[   15.132744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>[   15.132854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>[   15.132981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>[   15.142027] ACPI: PCI Interrupt Link [LNKA] (IRQs 11) *10
>[   15.142114] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
>[   15.142198] ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
>[   15.142283] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
>[   15.142366] ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
>[   15.142448] ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
>[   15.142530] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
>[   15.142612] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
>[   15.142734] ACPI: Power Resource [FN00] (off)
>[   15.142782] Linux Plug and Play Support v0.97 (c) Adam Belay
>[   15.142806] pnp: PnP ACPI init
>[   15.142812] ACPI: bus type pnp registered
>[   15.144576] pnp: PnP ACPI: found 10 devices
>[   15.144578] ACPI: ACPI bus type pnp unregistered
>[   15.144582] PnPBIOS: Disabled by ACPI PNP
>[   15.144760] PCI: Using ACPI for IRQ routing
>[   15.144763] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>[   15.197080] NET: Registered protocol family 8
>[   15.197081] NET: Registered protocol family 20
>[   15.197109] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[   15.197113] hpet0: 3 64-bit timers, 14318180 Hz
>[   15.198143] AppArmor: AppArmor Filesystem Enabled
>[   15.201071] Time: tsc clocksource has been installed.
>[   15.201082] Switched to high resolution mode on CPU 0
>[   15.201171] Switched to high resolution mode on CPU 1
>[   15.217055] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
>[   15.217058] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>[   15.217060] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>[   15.217062] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>[   15.217065] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>[   15.217067] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
>[   15.217070] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
>[   15.217072] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
>[   15.217078] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
>[   15.217084] system 00:06: ioport range 0x680-0x69f has been reserved
>[   15.217086] system 00:06: ioport range 0x6b0-0x6ff has been reserved
>[   15.217088] system 00:06: ioport range 0x800-0x80f has been reserved
>[   15.217090] system 00:06: ioport range 0x900-0x90f has been reserved
>[   15.217092] system 00:06: ioport range 0x1000-0x107f has been reserved
>[   15.217095] system 00:06: ioport range 0x1180-0x11bf has been reserved
>[   15.217097] system 00:06: ioport range 0x1640-0x164f has been reserved
>[   15.217099] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
>[   15.247434] PCI: Bridge: 0000:00:1c.0
>[   15.247436]   IO window: disabled.
>[   15.247441]   MEM window: f0300000-f03fffff
>[   15.247445]   PREFETCH window: disabled.
>[   15.247451] PCI: Bridge: 0000:00:1c.1
>[   15.247453]   IO window: 2000-2fff
>[   15.247459]   MEM window: f0200000-f02fffff
>[   15.247463]   PREFETCH window: disabled.
>[   15.247472] PCI: Bus 5, cardbus bridge: 0000:04:09.0
>[   15.247473]   IO window: 00001400-000014ff
>[   15.247478]   IO window: 00003000-000030ff
>[   15.247482]   PREFETCH window: 8c000000-8fffffff
>[   15.247486]   MEM window: 90000000-93ffffff
>[   15.247491] PCI: Bridge: 0000:00:1e.0
>[   15.247492]   IO window: disabled.
>[   15.247497]   MEM window: f0400000-f04fffff
>[   15.247501]   PREFETCH window: disabled.
>[   15.247530] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
>[   15.247536] PCI: Setting latency timer of device 0000:00:1c.0 to 64
>[   15.247561] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
>[   15.247566] PCI: Setting latency timer of device 0000:00:1c.1 to 64
>[   15.247580] PCI: Setting latency timer of device 0000:00:1e.0 to 64
>[   15.247635] ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 20 (level, low) -> IRQ 18
>[   15.247648] NET: Registered protocol family 2
>[   15.285041] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>[   15.285233] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[   15.285635] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[   15.285843] TCP: Hash tables configured (established 131072 bind 65536)
>[   15.285845] TCP reno registered
>[   15.297092] checking if image is initramfs... it is
>[   15.877913] Freeing initrd memory: 7595k freed
>[   15.878049] Simple Boot Flag at 0x36 set to 0x1
>[   15.878557] audit: initializing netlink socket (disabled)
>[   15.878571] audit(1207657848.293:1): initialized
>[   15.878755] highmem bounce pool size: 64 pages
>[   15.880347] VFS: Disk quotas dquot_6.5.1
>[   15.880410] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[   15.880519] io scheduler noop registered
>[   15.880521] io scheduler anticipatory registered
>[   15.880522] io scheduler deadline registered
>[   15.880531] io scheduler cfq registered (default)
>[   15.880543] Boot video device is 0000:00:02.0
>[   15.880767] PCI: Setting latency timer of device 0000:00:1c.0 to 64
>[   15.880826] assign_interrupt_mode Found MSI capability
>[   15.880875] Allocate Port Service[0000:00:1c.0:pcie00]
>[   15.880902] Allocate Port Service[0000:00:1c.0:pcie02]
>[   15.880998] PCI: Setting latency timer of device 0000:00:1c.1 to 64
>[   15.881056] assign_interrupt_mode Found MSI capability
>[   15.881102] Allocate Port Service[0000:00:1c.1:pcie00]
>[   15.881128] Allocate Port Service[0000:00:1c.1:pcie02]
>[   15.881349] isapnp: Scanning for PnP cards...
>[   16.235546] isapnp: No Plug & Play device found
>[   16.255844] Real Time Clock Driver v1.12ac
>[   16.256036] hpet_resources: 0xfed00000 is busy
>[   16.256065] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>[   16.257020] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
>[   16.257075] input: Macintosh mouse button emulation as /devices/virtual/input/input0
>[   16.257153] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[   16.260187] i8042.c: Detected active multiplexing controller, rev 1.1.
>[   16.261610] serio: i8042 KBD port at 0x60,0x64 irq 1
>[   16.261614] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[   16.261616] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[   16.261618] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[   16.261620] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[   16.281582] mice: PS/2 mouse device common for all mice
>[   16.281670] EISA: Probing bus 0 at eisa.0
>[   16.281677] Cannot allocate resource for EISA slot 1
>[   16.281679] Cannot allocate resource for EISA slot 2
>[   16.281681] Cannot allocate resource for EISA slot 3
>[   16.281704] EISA: Detected 0 cards.
>[   16.281707] cpuidle: using governor ladder
>[   16.281708] cpuidle: using governor menu
>[   16.281778] NET: Registered protocol family 1
>[   16.281801] Using IPI No-Shortcut mode
>[   16.281831] registered taskstats version 1
>[   16.281932]   Magic number: 4:337:531
>[   16.281995] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
>[   16.281997] EDD information not available.
>[   16.282184] Freeing unused kernel memory: 364k freed
>[   16.325559] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>[   17.469199] fuse init (API version 7.9)
>[   17.482817] ACPI: Transitioning device [FAN0] to D3
>[   17.482820] ACPI: Transitioning device [FAN0] to D3
>[   17.482823] ACPI: Fan [FAN0] (off)
>[   17.488464] ACPI: SSDT 7F6D807F, 0328 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>[   17.488652] ACPI: SSDT 7F6D7A5F, 059B (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>[   17.490382] Monitor-Mwait will be used to enter C-1 state
>[   17.490385] Monitor-Mwait will be used to enter C-2 state
>[   17.490464] ACPI: CPU0 (power states: C1[C1] C2[C2])
>[   17.490468] ACPI: Processor [CPU0] (supports 8 throttling states)
>[   17.490664] ACPI: SSDT 7F6D83A7, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>[   17.490841] ACPI: SSDT 7F6D7FFA, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>[   17.492027] ACPI: CPU1 (power states: C1[C1] C2[C2])
>[   17.492031] ACPI: Processor [CPU1] (supports 8 throttling states)
>[   17.493655] ACPI: Thermal Zone [TZ00] (56 C)
>[   17.494158] ACPI: Thermal Zone [TZ01] (56 C)
>[   17.772154] usbcore: registered new interface driver usbfs
>[   17.772175] usbcore: registered new interface driver hub
>[   17.772196] usbcore: registered new device driver usb
>[   17.781618] USB Universal Host Controller Interface driver v3.0
>[   17.781666] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17
>[   17.781677] PCI: Setting latency timer of device 0000:00:1a.0 to 64
>[   17.781681] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>[   17.781887] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[   17.781921] uhci_hcd 0000:00:1a.0: irq 17, io base 0x00001820
>[   17.782038] usb usb1: configuration #1 chosen from 1 choice
>[   17.782058] hub 1-0:1.0: USB hub found
>[   17.782062] hub 1-0:1.0: 2 ports detected
>[   17.849956] SCSI subsystem initialized
>[   17.883608] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19
>[   17.883619] PCI: Setting latency timer of device 0000:00:1a.1 to 64
>[   17.883623] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>[   17.883644] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>[   17.883675] uhci_hcd 0000:00:1a.1: irq 19, io base 0x00001840
>[   17.883772] usb usb2: configuration #1 chosen from 1 choice
>[   17.883791] hub 2-0:1.0: USB hub found
>[   17.883795] hub 2-0:1.0: 2 ports detected
>[   17.930243] libata version 3.00 loaded.
>[   17.987533] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
>[   17.987545] PCI: Setting latency timer of device 0000:00:1d.0 to 64
>[   17.987549] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[   17.987569] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>[   17.987600] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001860
>[   17.987697] usb usb3: configuration #1 chosen from 1 choice
>[   17.987717] hub 3-0:1.0: USB hub found
>[   17.987721] hub 3-0:1.0: 2 ports detected
>[   18.091477] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21
>[   18.091488] PCI: Setting latency timer of device 0000:00:1d.1 to 64
>[   18.091492] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[   18.091512] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>[   18.091543] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001880
>[   18.091643] usb usb4: configuration #1 chosen from 1 choice
>[   18.091663] hub 4-0:1.0: USB hub found
>[   18.091668] hub 4-0:1.0: 2 ports detected
>[   18.195408] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22
>[   18.195419] PCI: Setting latency timer of device 0000:00:1d.2 to 64
>[   18.195423] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[   18.195442] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>[   18.195474] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000018a0
>[   18.195576] usb usb5: configuration #1 chosen from 1 choice
>[   18.195596] hub 5-0:1.0: USB hub found
>[   18.195600] hub 5-0:1.0: 2 ports detected
>[   18.299533] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 22
>[   18.299547] PCI: Setting latency timer of device 0000:00:1a.7 to 64
>[   18.299550] ehci_hcd 0000:00:1a.7: EHCI Host Controller
>[   18.299572] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>[   18.303487] ehci_hcd 0000:00:1a.7: debug port 1
>[   18.303494] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>[   18.303499] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf0704000
>[   18.319247] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>[   18.319367] usb usb6: configuration #1 chosen from 1 choice
>[   18.319389] hub 6-0:1.0: USB hub found
>[   18.319394] hub 6-0:1.0: 4 ports detected
>[   18.423322] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
>[   18.423340] PCI: Setting latency timer of device 0000:00:1d.7 to 64
>[   18.423345] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[   18.423378] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>[   18.427290] ehci_hcd 0000:00:1d.7: debug port 1
>[   18.427296] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>[   18.427301] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf0704400
>[   18.443188] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>[   18.443333] usb usb7: configuration #1 chosen from 1 choice
>[   18.443366] hub 7-0:1.0: USB hub found
>[   18.443373] hub 7-0:1.0: 6 ports detected
>[   18.547426] ACPI: PCI Interrupt 0000:04:09.1[B] -> GSI 21 (level, low) -> IRQ 19
>[   18.599104] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[f0401000-f04017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>[   18.606163] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21
>[   18.606198] PCI: Setting latency timer of device 0000:00:1f.2 to 64
>[   18.606210] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>[   18.608175] ata_piix 0000:00:1f.2: version 2.12
>[   18.608180] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>[   18.763018] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21
>[   18.763059] PCI: Setting latency timer of device 0000:00:1f.2 to 64
>[   18.763153] scsi0 : ata_piix
>[   18.763304] scsi1 : ata_piix
>[   18.764084] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18e0 irq 14
>[   18.764086] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18e8 irq 15
>[   18.838965] usb 6-2: new high speed USB device using ehci_hcd and address 2
>[   18.928997] ata1.00: ATA-8: SAMSUNG HM160HI, HH100-06, max UDMA7
>[   18.929004] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>[   18.944990] ata1.00: configured for UDMA/133
>[   19.063372] usb 6-2: configuration #1 chosen from 1 choice
>[   19.263138] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L632H, SC00, max UDMA/33
>[   19.434980] ata2.00: configured for UDMA/33
>[   19.435094] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM160HI  HH10 PQ: 0 ANSI: 5
>[   19.438999] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L632H  SC00 PQ: 0 ANSI: 5
>[   19.446724] Driver 'sd' needs updating - please use bus_type methods
>[   19.446787] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>[   19.446796] sd 0:0:0:0: [sda] Write Protect is off
>[   19.446798] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[   19.446812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   19.446850] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
>[   19.446858] sd 0:0:0:0: [sda] Write Protect is off
>[   19.446860] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[   19.446873] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   19.446876]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
>[   19.468856]  sda1 sda2 < sda5 sda6 sda7 >
>[   19.506435] sd 0:0:0:0: [sda] Attached SCSI disk
>[   19.511259] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[   19.511276] sr 1:0:0:0: Attached scsi generic sg1 type 5
>[   19.533611] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[   19.533616] Uniform CD-ROM driver Revision: 3.20
>[   19.533664] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[   19.686468] usb 5-1: new full speed USB device using uhci_hcd and address 2
>[   19.721790] Attempting manual resume
>[   19.721793] swsusp: Resume From Partition 8:5
>[   19.721795] PM: Checking swsusp image.
>[   19.722059] PM: Resume from disk failed.
>[   19.726197] swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
>[   19.726203] swsusp: Basic memory bitmaps created
>[   19.734329] swsusp: Basic memory bitmaps freed
>[   19.764140] kjournald starting.  Commit interval 5 seconds
>[   19.764150] EXT3-fs: mounted filesystem with ordered data mode.
>[   19.861724] usb 5-1: configuration #1 chosen from 1 choice
>[   19.874583] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0000f0410107774d]
>[   27.902685] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[   27.982655] iTCO_vendor_support: vendor-support=0
>[   28.004196] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
>[   28.083195] Linux agpgart interface v0.102
>[   28.107255] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>[   28.129568] input: Power Button (FF) as /devices/virtual/input/input2
>[   28.190508] ACPI: Power Button (FF) [PWRF]
>[   28.190598] input: Lid Switch as /devices/virtual/input/input3
>[   28.218541] ACPI: Lid Switch [LID0]
>[   28.218591] input: Power Button (CM) as /devices/virtual/input/input4
>[   28.278523] agpgart: Detected an Intel 965GM Chipset.
>[   28.279396] agpgart: Detected 7676K stolen memory.
>[   28.291367] ACPI: Power Button (CM) [PWRB]
>[   28.291424] input: Sleep Button (CM) as /devices/virtual/input/input5
>[   28.291457] agpgart: AGP aperture is 256M @ 0xd0000000
>[   28.354411] ACPI: Sleep Button (CM) [SLPB]
>[   28.355727] ACPI: AC Adapter [ADP1] (on-line)
>[   28.445065] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000
>[   28.482074] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
>[   28.547998] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
>[   28.548040] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   28.548084] input: PC Speaker as /devices/platform/pcspkr/input/input7
>[   28.595451] ACPI: Battery Slot [BAT1] (battery present)
>[   28.740049] ricoh-mmc: Ricoh MMC Controller disabling driver
>[   28.740052] ricoh-mmc: Copyright(c) Philip Langdale
>[   28.740092] ricoh-mmc: Ricoh MMC controller found at 0000:04:09.3 [1180:0843] (rev 0)
>[   28.740096] ricoh-mmc: Main firewire function not found. Cannot disable controller.
>[   28.777349] sdhci: Secure Digital Host Controller Interface driver
>[   28.777352] sdhci: Copyright(c) Pierre Ossman
>[   28.777391] sdhci: SDHCI controller found at 0000:04:09.2 [1180:0822] (rev 18)
>[   28.777475] ACPI: PCI Interrupt 0000:04:09.2[C] -> GSI 22 (level, low) -> IRQ 23
>[   28.777492] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
>[   28.777536] mmc0: SDHCI at 0xf0401800 irq 23 DMA
>[   28.790784] Yenta: CardBus bridge found at 0000:04:09.0 [144d:c510]
>[   28.917866] Yenta: ISA IRQ mask 0x0cb8, PCI irq 18
>[   28.917869] Socket status: 30000006
>[   28.917872] Yenta: Raising subordinate bus# of parent bus (#04) from #05 to #08
>[   28.917876] pcmcia: parent PCI bridge Memory window: 0xf0400000 - 0xf04fffff
>[   29.122757] ACPI: WMI-Acer: Mapper loaded
>[   29.219759] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16
>[   29.219772] PCI: Setting latency timer of device 0000:03:00.0 to 64
>[   29.219800] sky2 0000:03:00.0: v1.20 addr 0xf0200000 irq 16 Yukon-FE (0xb7) rev 3
>[   29.220189] sky2 eth0: addr 00:13:77:5b:6f:b7
>[   29.307749] Linux video capture interface: v2.00
>[   29.362981] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
>[   29.362984] iwl3945: Copyright(c) 2003-2007 Intel Corporation
>[   29.363125] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>[   29.363140] PCI: Setting latency timer of device 0000:02:00.0 to 64
>[   29.363160] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>[   29.450893] Bluetooth: Core ver 2.11
>[   29.451729] NET: Registered protocol family 31
>[   29.451731] Bluetooth: HCI device and connection manager initialized
>[   29.451734] Bluetooth: HCI socket layer initialized
>[   29.506004] uvcvideo: Found UVC 1.00 device Vega USB 2.0 Camera. (0ac8:c302)
>[   29.507548] usbcore: registered new interface driver uvcvideo
>[   29.507552] USB Video Class driver (v0.1.0)
>[   29.556741] Bluetooth: HCI USB driver ver 2.9
>[   29.558439] usbcore: registered new interface driver hci_usb
>[   29.655162] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
>[   29.655185] PCI: Setting latency timer of device 0000:00:1b.0 to 64
>[   30.145095] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>[   30.145450] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
>[   30.277295] cs: IO port probe 0x100-0x3af: clean.
>[   30.279415] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>[   30.280301] cs: IO port probe 0x820-0x8ff: clean.
>[   30.281024] cs: IO port probe 0xc00-0xcf7: clean.
>[   30.281912] cs: IO port probe 0xa00-0xaff: clean.
>[   30.490992] lp: driver loaded but no devices found
>[   30.599801] Adding 1975952k swap on /dev/sda5.  Priority:-1 extents:1 across:1975952k
>[   31.223443] EXT3 FS on sda6, internal journal
>[   32.258753] kjournald starting.  Commit interval 5 seconds
>[   32.259183] EXT3 FS on sda7, internal journal
>[   32.259190] EXT3-fs: mounted filesystem with ordered data mode.
>[   33.027181] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   34.869113] No dock devices found.
>[   37.572518] sky2 eth0: enabling interface
>[   38.306741] NET: Registered protocol family 10
>[   38.306956] lo: Disabled Privacy Extensions
>[   38.307297] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   38.307672] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[   38.588160] ppdev: user-space parallel port driver
>[   38.985385] audit(1207650671.658:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5500 profile="/usr/sbin/cupsd" namespace="default"
>[   44.851815] apm: BIOS not found.
>[   50.824363] vboxdrv: Trying to deactivate the NMI watchdog permanently...
>[   50.824372] vboxdrv: Successfully done.
>[   50.824447] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>[   50.824451] vboxdrv: Successfully loaded version 1.5.6 (interface 0x00050002).
>[   51.283795] Bluetooth: L2CAP ver 2.9
>[   51.283803] Bluetooth: L2CAP socket layer initialized
>[   51.416773] Bluetooth: RFCOMM socket layer initialized
>[   51.416793] Bluetooth: RFCOMM TTY layer initialized
>[   51.416796] Bluetooth: RFCOMM ver 1.8
>[   55.603806] [drm] Initialized drm 1.1.0 20060810
>[   55.659755] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
>[   55.659774] PCI: Setting latency timer of device 0000:00:02.0 to 64
>[   55.659878] [drm] Initialized i915 1.6.0 20060119 on minor 0

Actions: View

Attachments on bug 15360: 15752 | 15756 | 15758 | 15759 | 15804

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.