Attachment 21803 Details for Bug 12882 – my "grep intel\(0\) /var/log/Xorg.0.log"

my "grep intel\(0\) /var/log/Xorg.0.log"

intel_log.txt (text/plain), 9.91 KB, created by legolas558 on 2009-01-08 05:19:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: legolas558

Created: 2009-01-08 05:19:03 UTC

Size: 9.91 KB

patch

obsolete

>(II) intel(0): Creating default Display subsection in Screen section
>(==) intel(0): Depth 24, (==) framebuffer bpp 32
>(==) intel(0): RGB weight 888
>(==) intel(0): Default visual is TrueColor
>(II) intel(0): Integrated Graphics Chipset: Intel(R) 855GM
>(--) intel(0): Chipset: "852GM/855GM"
>(--) intel(0): Linear framebuffer at 0xE8000000
>(--) intel(0): IO registers at addr 0xE0000000
>(II) intel(0): 2 display pipes available.
>(==) intel(0): Using EXA for acceleration
>(II) intel(0): initializing int10
>(II) intel(0): Primary V_BIOS segment is: 0xc000
>(II) intel(0): VESA BIOS detected
>(II) intel(0): VESA VBE Version 3.0
>(II) intel(0): VESA VBE Total Mem: 8000 kB
>(II) intel(0): VESA VBE OEM: Intel(r)852MG/852MGE/855MG/855MGE Graphics Chip Accelerated VGA BIOS
>(II) intel(0): VESA VBE OEM Software Rev: 1.0
>(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
>(II) intel(0): VESA VBE OEM Product: Intel(r)852MG/852MGE/855MG/855MGE Graphics Controller
>(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
>(II) intel(0): Output VGA using monitor section LVDS_17
>(II) intel(0): I2C bus "CRTDDC_A" initialized.
>(II) intel(0): Output LVDS has no monitor section
>(II) intel(0): I2C bus "LVDSDDC_C" initialized.
>(II) intel(0): Attempting to determine panel fixed mode.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(II) intel(0): I2C bus "DVODDC_D" initialized.
>(II) intel(0): I2C bus "DVOI2C_E" initialized.
>(II) intel(0): I2C bus "DVOI2C_E" removed.
>(II) intel(0): I2C bus "DVOI2C_E" initialized.
>(II) intel(0): I2C bus "DVOI2C_E" removed.
>(II) intel(0): I2C bus "DVOI2C_B" initialized.
>(II) intel(0): I2C bus "DVOI2C_B" removed.
>(II) intel(0): I2C bus "DVOI2C_E" initialized.
>(II) intel(0): I2C bus "DVOI2C_E" removed.
>(II) intel(0): I2C bus "DVOI2C_E" initialized.
>(II) intel(0): I2C bus "DVOI2C_E" removed.
>(II) intel(0): I2C bus "DVODDC_D" removed.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(II) intel(0): Output VGA disconnected
>(II) intel(0): Output LVDS connected
>(II) intel(0): Using exact sizes for initial modes
>(II) intel(0): Output LVDS using initial mode 1024x768
>(II) intel(0): Monitoring connected displays enabled
>(II) intel(0): detected 128 kB GTT.
>(II) intel(0): detected 8060 kB stolen memory.
>(==) intel(0): video overlay key set to 0x101fe
>(==) intel(0): Will not try to enable page flipping
>(==) intel(0): Triple buffering disabled
>(==) intel(0): Intel XvMC decoder disabled
>(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
>(==) intel(0): DPI set to (96, 96)
>(II) intel(0): Comparing regs from server start up to After PreInit
>(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
>(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
>(WW) intel(0): PP_STATUS after: on, ready, sequencing on
>(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x80000202 to 0x00000202
>(WW) intel(0): PIPEBSTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
>(WW) intel(0): PIPEBSTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
>(II) intel(0): Kernel reported 110080 total, 1 used
>(II) intel(0): I830CheckAvailableMemory: 440316 kB available
>(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
>(II) intel(0): [drm] framebuffer mapped by ddx driver
>(II) intel(0): [drm] added 1 reserved context for kernel
>(II) intel(0): X context handle = 0x1
>(II) intel(0): [drm] installed DRM signal handler
>(**) intel(0): Framebuffer compression enabled
>(**) intel(0): Tiling enabled
>(==) intel(0): VideoRam: 131072 KB
>(II) intel(0): Attempting memory allocation with tiled buffers.
>(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
>(WW) intel(0): Allocation error, framebuffer compression disabled
>(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
>(II) intel(0): Tiled allocation successful.
>(II) intel(0): [drm] Registers = 0xe0000000
>(II) intel(0): [drm] ring buffer = 0xe8000000
>(II) intel(0): [drm] mapped front buffer at 0xe8800000, handle = 0xe8800000
>(II) intel(0): [drm] mapped back buffer at 0xe9800000, handle = 0xe9800000
>(II) intel(0): [drm] mapped depth buffer at 0xe9c00000, handle = 0xe9c00000
>(II) intel(0): [drm] mapped classic textures at 0xea000000, handle = 0xea000000
>(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
>(II) intel(0): [dri] visual configs initialized
>(II) intel(0): Page Flipping disabled
>(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>(==) intel(0): Backing store disabled
>(==) intel(0): Silken mouse enabled
>(II) intel(0): Initializing HW Cursor
>(II) intel(0): [DRI] installation complete
>(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
>(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x007e0000 (pgoffset 2016)
>(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x007e4000 (pgoffset 2020)
>(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x007e5000 (pgoffset 2021)
>(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x007e9000 (pgoffset 2025)
>(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x00800000 (pgoffset 2048)
>(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x00c00000 (pgoffset 3072)
>(II) intel(0): xf86BindGARTMemory: bind key 7 at 0x01800000 (pgoffset 6144)
>(II) intel(0): xf86BindGARTMemory: bind key 8 at 0x01c00000 (pgoffset 7168)
>(II) intel(0): xf86BindGARTMemory: bind key 9 at 0x02000000 (pgoffset 8192)
>(II) intel(0): Fixed memory allocation layout:
>(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
>(II) intel(0): 0x00020000-0x00027fff: logical 3D context (32 kB)
>(II) intel(0): 0x007df000:            end of stolen memory
>(II) intel(0): 0x007df000-0x007dffff: Core cursor (4 kB, 0x000000001d872000 physical
>(II) intel(0): 0x007e0000-0x007e3fff: ARGB cursor (16 kB, 0x000000001d888000 physical
>(II) intel(0): 0x007e4000-0x007e4fff: Core cursor (4 kB, 0x000000001d855000 physical
>(II) intel(0): 0x007e5000-0x007e8fff: ARGB cursor (16 kB, 0x000000001d894000 physical
>(II) intel(0): 0x007e9000-0x007e9fff: overlay registers (4 kB, 0x000000001d863000 physical
>(II) intel(0): 0x00800000-0x00bfffff: front buffer (4096 kB) X tiled
>(II) intel(0): 0x00c00000-0x017fffff: exa offscreen (12288 kB)
>(II) intel(0): 0x01800000-0x01bfffff: back buffer (4096 kB) X tiled
>(II) intel(0): 0x01c00000-0x01ffffff: depth buffer (4096 kB) X tiled
>(II) intel(0): 0x02000000-0x03ffffff: classic textures (32768 kB)
>(II) intel(0): 0x08000000:            end of aperture
>(II) intel(0): using SSC reference clock of 66 MHz
>(WW) intel(0): Chosen PLL clock of 66.5 Mhz more than 2% away from desired 65.0 Mhz
>(II) intel(0): Selecting standard 18 bit TMDS pixel format.
>(II) intel(0): Output configuration:
>(II) intel(0):   Pipe A is off
>(II) intel(0):   Display plane A is now enabled and connected to pipe A.
>(WW) intel(0):   Hardware claims pipe A is on while software believes it is off
>(WW) intel(0):   Hardware claims plane A is on while software believes it is off
>(II) intel(0):   Pipe B is on
>(II) intel(0):   Display plane B is now enabled and connected to pipe B.
>(II) intel(0):   Output VGA is connected to pipe none
>(II) intel(0):   Output LVDS is connected to pipe B
>(II) intel(0): [drm] dma control initialized, using IRQ 11
>(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
>(II) intel(0): DPMS enabled
>(II) intel(0): Set up overlay video
>(II) intel(0): direct rendering: Enabled
>(II) intel(0): Setting screen physical size to 270 x 203
>(EE) intel(0): underrun on pipe B!
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(EE) intel(0): underrun on pipe B!
>(EE) intel(0): underrun on pipe B!
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(EE) intel(0): underrun on pipe B!
>(EE) intel(0): underrun on pipe B!
>(EE) intel(0): underrun on pipe B!
>(EE) intel(0): underrun on pipe B!
>(EE) intel(0): underrun on pipe B!
>(EE) intel(0): underrun on pipe B!
>(EE) intel(0): underrun on pipe B!
>(EE) intel(0): underrun on pipe B!
>(EE) intel(0): underrun on pipe B!
>(EE) intel(0): underrun on pipe B!
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
>(EE) intel(0): tried to update DSPARB with both planes enabled!
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
>(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.

Actions: View

Attachments on bug 12882: 12145 | 21801 | 21803

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.