Attachment 23341 Details for Bug 20339 – dmesg output

dmesg output

dmesg (text/plain), 14.95 KB, created by Brian De Wolf on 2009-02-26 15:08:18 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Brian De Wolf

Created: 2009-02-26 15:08:18 UTC

Size: 14.95 KB

patch

obsolete

>0e: ioport range 0x87c0-0x87df has been reserved
>system 00:0e: ioport range 0x8bb0-0x8bbb has been reserved
>system 00:0e: ioport range 0x8bc0-0x8bdf has been reserved
>system 00:0e: ioport range 0x8fb0-0x8fbb has been reserved
>system 00:0e: ioport range 0x8fc0-0x8fdf has been reserved
>system 00:0e: ioport range 0x93b0-0x93bb has been reserved
>system 00:0e: ioport range 0x93c0-0x93df has been reserved
>system 00:0e: ioport range 0x97b0-0x97bb has been reserved
>system 00:0e: ioport range 0x97c0-0x97df has been reserved
>system 00:0e: ioport range 0x9bb0-0x9bbb has been reserved
>system 00:0e: ioport range 0x9bc0-0x9bdf has been reserved
>system 00:0e: ioport range 0x9fb0-0x9fbb has been reserved
>system 00:0e: ioport range 0x9fc0-0x9fdf has been reserved
>system 00:0e: ioport range 0xa3b0-0xa3bb has been reserved
>system 00:0e: ioport range 0xa3c0-0xa3df has been reserved
>system 00:0e: ioport range 0xa7b0-0xa7bb has been reserved
>system 00:0e: ioport range 0xa7c0-0xa7df has been reserved
>system 00:0e: ioport range 0xabb0-0xabbb has been reserved
>system 00:0e: ioport range 0xabc0-0xabdf has been reserved
>system 00:0e: ioport range 0xafb0-0xafbb has been reserved
>system 00:0e: ioport range 0xafc0-0xafdf has been reserved
>system 00:0e: ioport range 0xb3b0-0xb3bb has been reserved
>system 00:0e: ioport range 0xb3c0-0xb3df has been reserved
>system 00:0e: ioport range 0xb7b0-0xb7bb has been reserved
>system 00:0e: ioport range 0xb7c0-0xb7df has been reserved
>system 00:0e: ioport range 0xbbb0-0xbbbb has been reserved
>system 00:0e: ioport range 0xbbc0-0xbbdf has been reserved
>system 00:0e: ioport range 0xbfb0-0xbfbb has been reserved
>system 00:0e: ioport range 0xbfc0-0xbfdf has been reserved
>system 00:0e: ioport range 0xc3b0-0xc3bb has been reserved
>system 00:0e: ioport range 0xc3c0-0xc3df has been reserved
>system 00:0e: ioport range 0xc7b0-0xc7bb has been reserved
>system 00:0e: ioport range 0xc7c0-0xc7df has been reserved
>system 00:0e: ioport range 0xcbb0-0xcbbb has been reserved
>system 00:0e: ioport range 0xcbc0-0xcbdf has been reserved
>system 00:0e: ioport range 0xcfb0-0xcfbb has been reserved
>system 00:0e: ioport range 0xcfc0-0xcfdf has been reserved
>system 00:0e: ioport range 0xd3b0-0xd3bb has been reserved
>system 00:0e: ioport range 0xd3c0-0xd3df has been reserved
>system 00:0e: ioport range 0xd7b0-0xd7bb has been reserved
>system 00:0e: ioport range 0xd7c0-0xd7df has been reserved
>system 00:0e: ioport range 0xdbb0-0xdbbb has been reserved
>system 00:0e: ioport range 0xdbc0-0xdbdf has been reserved
>system 00:0e: ioport range 0xdfb0-0xdfbb has been reserved
>system 00:0e: ioport range 0xdfc0-0xdfdf has been reserved
>system 00:0e: ioport range 0xe3b0-0xe3bb has been reserved
>system 00:0e: ioport range 0xe3c0-0xe3df has been reserved
>system 00:0e: ioport range 0xe7b0-0xe7bb has been reserved
>system 00:0e: ioport range 0xe7c0-0xe7df has been reserved
>system 00:0e: ioport range 0xebb0-0xebbb has been reserved
>system 00:0e: ioport range 0xebc0-0xebdf has been reserved
>system 00:0e: ioport range 0xefb0-0xefbb has been reserved
>system 00:0e: ioport range 0xefc0-0xefdf has been reserved
>system 00:0e: ioport range 0xf3b0-0xf3bb has been reserved
>system 00:0e: ioport range 0xf3c0-0xf3df has been reserved
>system 00:0e: ioport range 0xf7b0-0xf7bb has been reserved
>system 00:0e: ioport range 0xf7c0-0xf7df has been reserved
>system 00:0e: ioport range 0xfbb0-0xfbbb has been reserved
>system 00:0e: ioport range 0xfbc0-0xfbdf has been reserved
>system 00:0e: ioport range 0xffb0-0xffbb has been reserved
>system 00:0e: ioport range 0xffc0-0xffdf has been reserved
>pci 0000:00:1e.0: BAR 7: can't allocate I/O resource [0x10000-0xffff]
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.0:   IO window: disabled
>pci 0000:00:1c.0:   MEM window: 0xdfd00000-0xdfdfffff
>pci 0000:00:1c.0:   PREFETCH window: disabled
>pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
>pci 0000:03:01.0:   IO window: 0x001400-0x0014ff
>pci 0000:03:01.0:   IO window: 0x001800-0x0018ff
>pci 0000:03:01.0:   PREFETCH window: 0x50000000-0x53ffffff
>pci 0000:03:01.0:   MEM window: 0x54000000-0x57ffffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: 0xdfc00000-0xdfcfffff
>pci 0000:00:1e.0:   PREFETCH window: 0x00000050000000-0x00000053ffffff
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci 0000:03:01.0: enabling device (0000 -> 0003)
>pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:02: resource 0 mem: [0x0-0x0]
>pci_bus 0000:02: resource 1 mem: [0xdfd00000-0xdfdfffff]
>pci_bus 0000:02: resource 2 mem: [0x0-0x0]
>pci_bus 0000:02: resource 3 mem: [0x0-0x0]
>pci_bus 0000:03: resource 0 mem: [0x0-0x0]
>pci_bus 0000:03: resource 1 mem: [0xdfc00000-0xdfcfffff]
>pci_bus 0000:03: resource 2 mem: [0x50000000-0x53ffffff]
>pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
>pci_bus 0000:04: resource 0 io:  [0x1400-0x14ff]
>pci_bus 0000:04: resource 1 io:  [0x1800-0x18ff]
>pci_bus 0000:04: resource 2 mem: [0x50000000-0x53ffffff]
>pci_bus 0000:04: resource 3 mem: [0x54000000-0x57ffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Machine check exception polling timer started.
>highmem bounce pool size: 64 pages
>msgmni has been set to 1749
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler cfq registered (default)
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>lp: driver loaded but no devices found
>Real Time Clock Driver v1.12b
>Non-volatile memory driver v1.3
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>serial 0000:00:1e.3: PCI INT B disabled
>parport_pc 00:0c: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>lp0: using parport0 (interrupt-driven).
>loop: module loaded
>tg3.c:v3.97 (December 10, 2008)
>tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>tg3 0000:02:00.0: setting latency timer to 64
>tg3 0000:02:00.0: wake-up capability disabled by ACPI
>tg3 0000:02:00.0: PME# disabled
>eth0: Tigon3 [partno(BCM95751) rev 4001] (PCI Express) MAC address 00:11:43:45:36:1a
>eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1])
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>Linux video capture interface: v2.00
>Driver 'sd' needs updating - please use bus_type methods
>Driver 'sr' needs updating - please use bus_type methods
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
>Switched to high resolution mode on CPU 0
>ata1.00: ATA-6: FUJITSU MHT2060AH, 006C, max UDMA/100
>ata1.00: 117210240 sectors, multi 8: LBA 
>ata1.00: applying bridge limits
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHT2060A 006C PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors: (60.0 GB/55.8 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 16, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>i2c /dev entries driver
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Advanced Linux Sound Architecture Driver Version 1.0.18a.
>ALSA device list:
>  No soundcards found.
>TCP cubic registered
>NET: Registered protocol family 17
>Using IPI Shortcut mode
>input: AT Translated Set 2 keyboard as /class/input/input0
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
>Freeing unused kernel memory: 236k freed
>kjournald starting.  Commit interval 5 seconds
>ACPI: AC Adapter [AC] (on-line)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
>processor ACPI_CPU:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [THM] (58 C)
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel 915GM Chipset
>agpgart-intel 0000:00:00.0: detected 7932K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
>Marking TSC unstable due to TSC halts in idle
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0182]
>yenta_cardbus 0000:03:01.0: Using CSCINT to route CSC interrupts to PCI
>yenta_cardbus 0000:03:01.0: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:03:01.0: TI: mfunc 0x01111122, devctl 0x64
>Intel ICH 0000:00:1e.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>Intel ICH 0000:00:1e.2: setting latency timer to 64
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmpr
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ACPI: Battery Slot [BAT0] (battery present)
>input: Lid Switch as /class/input/input1
>ACPI: Lid Switch [LID]
>yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0c78, PCI irq 19
>yenta_cardbus 0000:03:01.0: Socket status: 30000006
>pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
>yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xdfc00000 - 0xdfcfffff
>yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>ipw2200 0000:03:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>eth1 (ipw2200): not using net_device_ops yet
>ipw2200 0000:03:03.0: firmware: requesting ipw2200-bss.fw
>Clocksource tsc unstable (delta = -249825035 ns)
>ACPI: Battery Slot [BAT1] (battery present)
>input: Power Button (CM) as /class/input/input2
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input3
>ACPI: Sleep Button (CM) [SBTN]
>ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
>input: PS/2 Mouse as /class/input/input4
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
>intel8x0_measure_ac97_clock: measured 50327 usecs
>intel8x0: clocking to 48000
>EXT3 FS on sda1, internal journal
>[drm] Initialized drm 1.1.0 20060810
>pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:02.0: setting latency timer to 64
>[drm] Initialized i915 1.6.0 20080730 on minor 0
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 506036k swap on /dev/sda2.  Priority:-1 extents:1 across:506036k 
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16253 buckets, 65012 max)
>tg3 0000:02:00.0: wake-up capability disabled by ACPI
>tg3 0000:02:00.0: PME# disabled
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.

Actions: View

Attachments on bug 20339: 23340 | 23341 | 23342 | 23343 | 24095

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.