Attachment 28492 Details for Bug 23234 – dmesg

dmesg

dmesg (text/plain), 35.00 KB, created by aaron on 2009-08-10 19:12:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: aaron

Created: 2009-08-10 19:12:22 UTC

Size: 35.00 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.31-rc5 (root@gentoo) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #1 SMP PREEMPT Thu Aug 6 00:22:33 NZST 2009
>Command line: root=/dev/sda6
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bffd0000 (usable)
> BIOS-e820: 00000000bffd0000 - 00000000bffde000 (ACPI data)
> BIOS-e820: 00000000bffde000 - 00000000c0000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>DMI present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>last_pfn = 0xbffd0 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 0000000000 mask FF80000000 write-back
>  1 base 0080000000 mask FFC0000000 write-back
>  2 disabled
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>Scanning 0 areas for low memory corruption
>modified physical RAM map:
> modified: 0000000000000000 - 0000000000010000 (reserved)
> modified: 0000000000010000 - 000000000009fc00 (usable)
> modified: 000000000009fc00 - 00000000000a0000 (reserved)
> modified: 00000000000e0000 - 0000000000100000 (reserved)
> modified: 0000000000100000 - 00000000bffd0000 (usable)
> modified: 00000000bffd0000 - 00000000bffde000 (ACPI data)
> modified: 00000000bffde000 - 00000000c0000000 (ACPI NVS)
> modified: 00000000fec00000 - 00000000fec01000 (reserved)
> modified: 00000000fee00000 - 00000000fef00000 (reserved)
> modified: 00000000ff780000 - 0000000100000000 (reserved)
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-00000000bffd0000
> 0000000000 - 00bfe00000 page 2M
> 00bfe00000 - 00bffd0000 page 4k
>kernel direct mapping tables up to bffd0000 @ 10000-15000
>ACPI: RSDP 00000000000fa950 00014 (v00 ACPIAM)
>ACPI: RSDT 00000000bffd0000 00034 (v01 A M I  OEMRSDT  06000602 MSFT 00000097)
>ACPI: FACP 00000000bffd0200 00084 (v02 A M I  OEMFACP  06000602 MSFT 00000097)
>ACPI: DSDT 00000000bffd0440 064B1 (v01  1ADGH 1ADGH000 00000000 INTL 02002026)
>ACPI: FACS 00000000bffde000 00040
>ACPI: APIC 00000000bffd0390 00070 (v01 A M I  OEMAPIC  06000602 MSFT 00000097)
>ACPI: MCFG 00000000bffd0400 0003C (v01 A M I  OEMMCFG  06000602 MSFT 00000097)
>ACPI: OEMB 00000000bffde040 0005B (v01 A M I  AMI_OEM  06000602 MSFT 00000097)
>ACPI: Local APIC address 0xfee00000
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-00000000bffd0000
>Bootmem setup node 0 0000000000000000-00000000bffd0000
>  NODE_DATA [0000000000013000 - 0000000000017fff]
>  bootmap [0000000000018000 -  000000000002ffff] pages 18
>(6 early reservations) ==> bootmem [0000000000 - 00bffd0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 00016e705c]    TEXT DATA BSS ==> [0001000000 - 00016e705c]
>  #3 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #4 [00016e8000 - 00016e81a8]              BRK ==> [00016e8000 - 00016e81a8]
>  #5 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
>found SMP MP-table at [ffff8800000ff780] ff780
> [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880001c00000-ffff8800045fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x000bffd0
>On node 0 totalpages: 786271
>  DMA zone: 56 pages used for memmap
>  DMA zone: 102 pages reserved
>  DMA zone: 3825 pages, LIFO batch:0
>  DMA32 zone: 10696 pages used for memmap
>  DMA32 zone: 771592 pages, LIFO batch:31
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x2008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
>NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 25 pages at ffff880001705000, static data 71072 bytes
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 775417
>Policy zone: DMA32
>Kernel command line: root=/dev/sda6
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Initializing CPU#0
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 1800000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Memory: 3094592k/3145536k available (3972k kernel code, 452k absent, 50492k reserved, 2055k data, 464k init)
>SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:4352 nr_irqs:424
>Fast TSC calibration using PIT
>Detected 2613.234 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5226.46 BogoMIPS (lpj=2613234)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys freezer
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0x0 -> Node 0
>tseg: 0000000000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 5 MCE banks
>using C1E aware idle routine
>ACPI: Core revision 20090521
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5225.87 BogoMIPS (lpj=2612936)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1/0x1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>mce: CPU supports 5 MCE banks
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
>Brought up 2 CPUs
>Total of 2 processors activated (10452.34 BogoMIPS).
>Time: 13:11:48  Date: 08/11/09
>NET: Registered protocol family 16
>node 0 link 0: io port [1000, ffffff]
>node 0 link 0: io port [2000, 3fff]
>TOM: 00000000c0000000 aka 3072M
>node 0 link 0: mmio [e0000000, efffffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [c0000000, fe0bffff]
>bus: [00,ff] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [c0000000, fcffffffff]
>bus: 00 index 2 mmio: [a0000, bffff]
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>HPET not enabled in BIOS. You might try hpet=force boot option
>pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f]
>pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f]
>pci 0000:00:01.1: PME# supported from D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>pci 0000:00:02.0: reg 10 32bit mmio: [0xfeafb000-0xfeafbfff]
>pci 0000:00:02.0: supports D1 D2
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:02.1: reg 10 32bit mmio: [0xfeafac00-0xfeafacff]
>pci 0000:00:02.1: supports D1 D2
>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.1: PME# disabled
>pci 0000:00:05.0: reg 10 io port: [0xd800-0xd807]
>pci 0000:00:05.0: reg 14 io port: [0xd480-0xd483]
>pci 0000:00:05.0: reg 18 io port: [0xd400-0xd407]
>pci 0000:00:05.0: reg 1c io port: [0xd080-0xd083]
>pci 0000:00:05.0: reg 20 io port: [0xd000-0xd00f]
>pci 0000:00:05.0: reg 24 32bit mmio: [0xfeaf9000-0xfeaf9fff]
>pci 0000:00:05.1: reg 10 io port: [0xcc00-0xcc07]
>pci 0000:00:05.1: reg 14 io port: [0xc880-0xc883]
>pci 0000:00:05.1: reg 18 io port: [0xc800-0xc807]
>pci 0000:00:05.1: reg 1c io port: [0xc480-0xc483]
>pci 0000:00:05.1: reg 20 io port: [0xc400-0xc40f]
>pci 0000:00:05.1: reg 24 32bit mmio: [0xfeaf8000-0xfeaf8fff]
>pci 0000:00:06.1: reg 10 32bit mmio: [0xfeaf4000-0xfeaf7fff]
>pci 0000:00:06.1: PME# supported from D3hot D3cold
>pci 0000:00:06.1: PME# disabled
>pci 0000:00:08.0: reg 10 32bit mmio: [0xfeaf3000-0xfeaf3fff]
>pci 0000:00:08.0: reg 14 io port: [0xc080-0xc087]
>pci 0000:00:08.0: reg 18 32bit mmio: [0xfeafa800-0xfeafa8ff]
>pci 0000:00:08.0: reg 1c 32bit mmio: [0xfeafa400-0xfeafa40f]
>pci 0000:00:08.0: supports D1 D2
>pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:08.0: PME# disabled
>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.0: PME# disabled
>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0c.0: PME# disabled
>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0d.0: PME# disabled
>pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0e.0: PME# disabled
>pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0f.0: PME# disabled
>pci 0000:00:06.0: transparent bridge
>pci 0000:06:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
>pci 0000:06:00.0: reg 18 64bit mmio: [0xfebf0000-0xfebfffff]
>pci 0000:06:00.0: reg 20 io port: [0xe000-0xe0ff]
>pci 0000:06:00.0: reg 30 32bit mmio: [0xfebc0000-0xfebdffff]
>pci 0000:06:00.0: supports D1 D2
>pci 0000:06:00.1: reg 10 64bit mmio: [0xfebe0000-0xfebeffff]
>pci 0000:06:00.1: supports D1 D2
>pci 0000:00:0f.0: bridge io port: [0xe000-0xefff]
>pci 0000:00:0f.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
>pci 0000:00:0f.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
>ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *14
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *0, disabled.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:05: ioport range 0x4d0-0x4d1 has been reserved
>system 00:05: ioport range 0x800-0x80f has been reserved
>system 00:05: ioport range 0x2000-0x207f has been reserved
>system 00:05: ioport range 0x2080-0x20ff has been reserved
>system 00:05: ioport range 0x2400-0x247f has been reserved
>system 00:05: ioport range 0x2480-0x24ff has been reserved
>system 00:05: ioport range 0x2800-0x287f has been reserved
>system 00:05: ioport range 0x2880-0x28ff has been reserved
>system 00:05: ioport range 0x2c00-0x2c7f has been reserved
>system 00:05: ioport range 0x2c80-0x2cff has been reserved
>system 00:05: iomem range 0xfea80000-0xfeabffff has been reserved
>system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
>system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:07: ioport range 0xa00-0xa0f has been reserved
>system 00:07: ioport range 0xa10-0xa1f has been reserved
>system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:09: iomem range 0x0-0x9ffff could not be reserved
>system 00:09: iomem range 0xc0000-0xcffff has been reserved
>system 00:09: iomem range 0xe0000-0xfffff could not be reserved
>system 00:09: iomem range 0x100000-0xbfffffff could not be reserved
>system 00:09: iomem range 0xff780000-0xffffffff has been reserved
>pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:06.0:   IO window: disabled
>pci 0000:00:06.0:   MEM window: disabled
>pci 0000:00:06.0:   PREFETCH window: disabled
>Switched to high resolution mode on CPU 0
>pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
>Switched to high resolution mode on CPU 1
>pci 0000:00:0b.0:   IO window: disabled
>pci 0000:00:0b.0:   MEM window: disabled
>pci 0000:00:0b.0:   PREFETCH window: disabled
>pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:0c.0:   IO window: disabled
>pci 0000:00:0c.0:   MEM window: disabled
>pci 0000:00:0c.0:   PREFETCH window: disabled
>pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:0d.0:   IO window: disabled
>pci 0000:00:0d.0:   MEM window: disabled
>pci 0000:00:0d.0:   PREFETCH window: disabled
>pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:0e.0:   IO window: disabled
>pci 0000:00:0e.0:   MEM window: disabled
>pci 0000:00:0e.0:   PREFETCH window: disabled
>pci 0000:00:0f.0: PCI bridge, secondary bus 0000:06
>pci 0000:00:0f.0:   IO window: 0xe000-0xefff
>pci 0000:00:0f.0:   MEM window: 0xfeb00000-0xfebfffff
>pci 0000:00:0f.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:06.0: setting latency timer to 64
>pci 0000:00:0b.0: setting latency timer to 64
>pci 0000:00:0c.0: setting latency timer to 64
>pci 0000:00:0d.0: setting latency timer to 64
>pci 0000:00:0e.0: setting latency timer to 64
>pci 0000:00:0f.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:06: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:06: resource 1 mem: [0xfeb00000-0xfebfffff]
>pci_bus 0000:06: resource 2 pref mem [0xd0000000-0xdfffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>microcode: CPU0: AMD CPU family 0xf not supported
>microcode: CPU1: AMD CPU family 0xf not supported
>Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>Scanning for low memory corruption every 60 seconds
>audit: initializing netlink socket (disabled)
>type=2000 audit(1249996308.177:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SGI XFS with security attributes, large block/inode numbers, no debug enabled
>msgmni has been set to 6044
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler anticipatory registered (default)
>io scheduler deadline registered
>io scheduler cfq registered
>pci 0000:00:05.0: Enabling HT MSI Mapping
>pci 0000:00:05.1: Enabling HT MSI Mapping
>pci 0000:00:06.0: Enabling HT MSI Mapping
>pci 0000:00:06.1: Enabling HT MSI Mapping
>pci 0000:00:08.0: Enabling HT MSI Mapping
>pci 0000:00:0b.0: Enabling HT MSI Mapping
>pci 0000:00:0c.0: Enabling HT MSI Mapping
>pci 0000:00:0d.0: Enabling HT MSI Mapping
>pci 0000:00:0e.0: Enabling HT MSI Mapping
>pci 0000:00:0f.0: Enabling HT MSI Mapping
>pci 0000:06:00.0: Boot video device
>  alloc irq_desc for 24 on node 0
>  alloc kstat_irqs on node 0
>pcieport-driver 0000:00:0b.0: irq 24 for MSI/MSI-X
>pcieport-driver 0000:00:0b.0: setting latency timer to 64
>  alloc irq_desc for 25 on node 0
>  alloc kstat_irqs on node 0
>pcieport-driver 0000:00:0c.0: irq 25 for MSI/MSI-X
>pcieport-driver 0000:00:0c.0: setting latency timer to 64
>  alloc irq_desc for 26 on node 0
>  alloc kstat_irqs on node 0
>pcieport-driver 0000:00:0d.0: irq 26 for MSI/MSI-X
>pcieport-driver 0000:00:0d.0: setting latency timer to 64
>  alloc irq_desc for 27 on node 0
>  alloc kstat_irqs on node 0
>pcieport-driver 0000:00:0e.0: irq 27 for MSI/MSI-X
>pcieport-driver 0000:00:0e.0: setting latency timer to 64
>  alloc irq_desc for 28 on node 0
>  alloc kstat_irqs on node 0
>pcieport-driver 0000:00:0f.0: irq 28 for MSI/MSI-X
>pcieport-driver 0000:00:0f.0: setting latency timer to 64
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PWRB]
>processor LNXCPU:00: registered as cooling_device0
>processor LNXCPU:01: registered as cooling_device1
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon default to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
>  alloc irq_desc for 19 on node 0
>  alloc kstat_irqs on node 0
>radeon 0000:06:00.0: PCI INT A -> Link[LNEB] -> GSI 19 (level, low) -> IRQ 19
>radeon 0000:06:00.0: setting latency timer to 64
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xFEBF0000
>[drm] register mmio size: 65536
>ATOM BIOS: X1950XT
>[drm] GPU reset succeed (RBBM_STATUS=0x10000140)
>[drm] Clocks initialized !
>[drm] Generation 2 PCI interface, using max accessible memory
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 256bits DDR
>[drm] radeon: 4 pipes initialized.
>[drm] radeon: VRAM 256M
>[drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF
>[drm] radeon: GTT 512M
>[drm] radeon: GTT from 0x10000000 to 0x2FFFFFFF
>[drm] radeon: irq initialized.
>[TTM] TTM available graphics memory: 1511 MiB
>[TTM] TTM available object memory: 1511 MiB
>[drm] radeon: 256M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] PCIE GART of 512M enabled (table at 0x00040000).
>[drm] radeon: cp idle (0x10000C03)
>[drm] Loading R500 Microcode
>[drm] radeon: ring at 0x0000000010000000
>[drm] ring test succeeded in 2 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   DVI-I
>[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm]     DFP3: INTERNAL_LVTM1
>[drm] Connector 1:
>[drm]   DVI-I
>[drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_KLDSCP_TMDS1
>[drm]     CRT2: INTERNAL_KLDSCP_DAC2
>[drm] fb mappable at 0xD00C0000
>[drm] vram apper at 0xD0000000
>[drm] size 7257600
>[drm] fb depth is 24
>[drm]    pitch is 6912
>executing set pll
>executing set crtc timing
>[drm] TMDS-8: set mode 1680x1050 2e
>executing set pll
>executing set crtc timing
>[drm] TMDS-6: set mode 1680x1050 2f
>Console: switching to colour frame buffer device 210x65
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] radeon: kernel modesetting successfully initialized.
>[drm] Initialized radeon 2.0.0 20080528 for 0000:06:00.0 on minor 0
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>Platform driver 'serial8250' needs updating - please use dev_pm_ops
>brd: module loaded
>loop: module loaded
>sata_nv 0000:00:05.0: version 3.5
>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
>  alloc irq_desc for 23 on node 0
>  alloc kstat_irqs on node 0
>sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:05.0: Using SWNCQ mode
>sata_nv 0000:00:05.0: setting latency timer to 64
>scsi0 : sata_nv
>scsi1 : sata_nv
>ata1: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 23
>ata2: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 23
>ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
>  alloc irq_desc for 22 on node 0
>  alloc kstat_irqs on node 0
>sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
>sata_nv 0000:00:05.1: Using SWNCQ mode
>sata_nv 0000:00:05.1: setting latency timer to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 22
>ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 22
>ata3: SATA link down (SStatus 0 SControl 300)
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21
>  alloc irq_desc for 21 on node 0
>  alloc kstat_irqs on node 0
>forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21
>forcedeth 0000:00:08.0: setting latency timer to 64
>nv_probe: set workaround bit for reversed mac addr
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATAPI: Optiarc DVD RW AD-7200S, 1.06, max UDMA/100
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: CD-ROM            Optiarc  DVD RW AD-7200S  1.06 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
>ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/133
>scsi 1:0:0:0: Direct-Access     ATA      ST3500630AS      3.AA PQ: 0 ANSI: 5
>sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 sda7 > sda3 sda4
>sd 1:0:0:0: [sda] Attached SCSI disk
>forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 1, addr 00:16:17:ea:f9:d0
>forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd: block sizes: qh 192 qtd 96 itd 192 sitd 96
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
>  alloc irq_desc for 20 on node 0
>  alloc kstat_irqs on node 0
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>drivers/usb/core/inode.c: creating file 'devices'
>drivers/usb/core/inode.c: creating file '001'
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: reset hcs_params 0x101a8a dbg=1 cc=1 pcc=10 !ppc ports=10
>ehci_hcd 0000:00:02.1: reset portroute 0 0 0 0 0 0 0 0 0 0 
>ehci_hcd 0000:00:02.1: reset hcc_params a086 caching frame 256/512/1024 park
>ehci_hcd 0000:00:02.1: park 0
>ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:02.1: debug port 1
>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
>ehci_hcd 0000:00:02.1: supports USB remote wakeup
>ehci_hcd 0000:00:02.1: irq 20, io mem 0xfeafac00
>ehci_hcd 0000:00:02.1: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:02.1: init command 010009 (park)=0 ithresh=1 period=256 RUN
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
>usb usb1: default language 0x0409
>usb usb1: udev 1, busnum 1, minor = 0
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.31-rc5 ehci_hcd
>usb usb1: SerialNumber: 0000:00:02.1
>usb usb1: uevent
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>usb 1-0:1.0: uevent
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 80 td 96
>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>drivers/usb/core/inode.c: creating file '002'
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: created debug files
>ohci_hcd 0000:00:02.0: supports USB remote wakeup
>ohci_hcd 0000:00:02.0: irq 23, io mem 0xfeafb000
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
>ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ohci_hcd 0000:00:02.0: OHCI controller state
>ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
>ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational CBSR=3
>ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
>ohci_hcd 0000:00:02.0: intrenable 0x8000004a MIE RHSC RD WDH
>ohci_hcd 0000:00:02.0: hcca frame #0003
>ohci_hcd 0000:00:02.0: roothub.a 0100120a POTPGT=1 NOCP NPS NDP=10(10)
>ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [3] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [4] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [5] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [6] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [7] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [8] 0x00000100 PPS
>ohci_hcd 0000:00:02.0: roothub.portstatus [9] 0x00000100 PPS
>usb usb2: default language 0x0409
>usb usb2: udev 1, busnum 2, minor = 128
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.31-rc5 ohci_hcd
>usb usb2: SerialNumber: 0000:00:02.0
>usb usb2: uevent
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>usb 2-0:1.0: uevent
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: no over-current protection
>hub 2-0:1.0: power on to power good time: 2ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>drivers/usb/core/inode.c: creating file '001'
>uhci_hcd: USB Universal Host Controller Interface driver
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver libusual
>PNP: No PS/2 controller found. Probing ports directly.
>Platform driver 'i8042' needs updating - please use dev_pm_ops
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:02: RTC can wake from S4
>ehci_hcd 0000:00:02.1: GetStatus port 4 status 001403 POWER sig=k CSC CONNECT
>hub 1-0:1.0: port 4: status 0501 change 0001
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 114 bytes nvram
>cpuidle: using governor ladder
>cpuidle: using governor menu
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>TCP cubic registered
>NET: Registered protocol family 17
>ata4.00: configured for UDMA/133
>scsi 3:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb:
>PM: Resume from disk failed.
>registered taskstats version 1
>  Magic number: 5:831:179
>acpi device:0f: hash matches
> sdb1 sdb2 sdb3
>sd 3:0:0:0: [sdb] Attached SCSI disk
>REISERFS (device sda6): found reiserfs format "3.6" with standard journal
>REISERFS (device sda6): using ordered data mode
>hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0000
>REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda6): checking transaction log (sda6)
>hub 1-0:1.0: state 7 ports 10 chg 0010 evt 0000
>hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:02.1: port 4 low speed --> companion
>REISERFS (device sda6): Using r5 hash to sort names
>VFS: Mounted root (reiserfs filesystem) readonly on device 8:6.
>Freeing unused kernel memory: 464k freed
>ehci_hcd 0000:00:02.1: GetStatus port 4 status 003402 POWER OWNER sig=k CSC
>hub 1-0:1.0: state 7 ports 10 chg 0000 evt 0010
>hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0010
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [3] = 0x00010301 CSC LSDA PPS CCS
>hub 2-0:1.0: port 4, status 0301, change 0001, 1.5 Mb/s
>hub 2-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x301
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [3] = 0x00100303 PRSC LSDA PPS PES CCS
>usb 2-4: new low speed USB device using ohci_hcd and address 2
>ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [3] = 0x00100303 PRSC LSDA PPS PES CCS
>usb 2-4: skipped 1 descriptor after interface
>usb 2-4: skipped 1 descriptor after interface
>usb 2-4: default language 0x0409
>usb 2-4: udev 2, busnum 2, minor = 129
>usb 2-4: New USB device found, idVendor=046d, idProduct=c517
>usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-4: Product: USB Receiver
>usb 2-4: Manufacturer: Logitech
>usb 2-4: uevent
>usb 2-4: usb_probe_device
>usb 2-4: configuration #1 chosen from 1 choice
>usb 2-4: adding 2-4:1.0 (config #1, interface 0)
>usb 2-4:1.0: uevent
>usbhid 2-4:1.0: usb_probe_interface
>usbhid 2-4:1.0: usb_probe_interface - got id
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input2
>logitech 0003:046D:C517.0001: input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-4/input0
>usb 2-4: adding 2-4:1.1 (config #1, interface 1)
>usb 2-4:1.1: uevent
>usbhid 2-4:1.1: usb_probe_interface
>usbhid 2-4:1.1: usb_probe_interface - got id
>logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input3
>logitech 0003:046D:C517.0002: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-4/input1
>drivers/usb/core/inode.c: creating file '002'
>hub 2-0:1.0: state 7 ports 10 chg 0000 evt 0010
>hub 1-0:1.0: hub_suspend
>usb usb1: bus auto-suspend
>ehci_hcd 0000:00:02.1: suspend root hub
>udev: starting version 141
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb 2-4: uevent
>usb 2-4:1.0: uevent
>usb 2-4:1.1: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>usb 2-4:1.0: uevent
>usb 2-4: uevent
>usb 2-4:1.1: uevent
>usb 2-4: uevent
>usb 2-4:1.1: uevent
>usb 2-4: uevent
>REISERFS (device sda4): found reiserfs format "3.6" with standard journal
>REISERFS (device sda4): using ordered data mode
>REISERFS (device sda4): journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda4): checking transaction log (sda4)
>REISERFS (device sda4): Using r5 hash to sort names
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>REISERFS (device sda7): found reiserfs format "3.6" with standard journal
>REISERFS (device sda7): using ordered data mode
>REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device sda7): checking transaction log (sda7)
>REISERFS (device sda7): Using r5 hash to sort names
>Adding 1959888k swap on /dev/sda5.  Priority:-1 extents:1 across:1959888k 
>  alloc irq_desc for 29 on node 0
>  alloc kstat_irqs on node 0
>forcedeth 0000:00:08.0: irq 29 for MSI/MSI-X
>osscore: sizeof(midi_packet_header_t) != 32 (40)
>MIDI subsystem not activated
>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
>oss_hdaudio 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
>usbcore: registered new interface driver oss_usb
>usb usb2: uevent
>usb 2-0:1.0: uevent
>usb 2-4: uevent
>usb 2-4:1.0: uevent
>usb 2-4:1.1: uevent
>usb usb1: uevent
>usb 1-0:1.0: uevent
>executing set pll
>executing set crtc timing
>[drm] TMDS-6: set mode  33
>executing set pll
>executing set crtc timing
>[drm] TMDS-8: set mode  36
>executing set pll
>executing set crtc timing
>[drm] TMDS-8: set mode  37
>executing set pll
>executing set crtc timing
>[drm] TMDS-6: set mode  38

Actions: View

Attachments on bug 23234: 28492 | 28493 | 29540 | 33446 | 33447

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.