Attachment 28646 Details for Bug 22719 – Xorg.0.log with s3 driver

Xorg.0.log with s3 driver

Xorg.0.log (text/plain), 26.63 KB, created by Eugene Zykov on 2009-08-15 10:49:29 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Eugene Zykov

Created: 2009-08-15 10:49:29 UTC

Size: 26.63 KB

patch

obsolete

>
>X.Org X Server 1.4.2
>Release Date: 11 June 2008
>X Protocol Version 11, Revision 0
>Build Operating System: NetBSD/i386  - 
>Current Operating System: NetBSD  5.0.1 NetBSD 5.0.1 (GENERIC) #0: Thu Jul 30 01:39:11 UTC 2009  builds@b8.netbsd.org:/home/builds/ab/netbsd-5-0-1-RELEASE/i386/200907292356Z-obj/home/builds/ab/netbsd-5-0-1-RELEASE/src/sys/arch/i386/compile/GENERIC i386
>Build Date: 11 June 2008  04:31:59PM
> 
>	Before reporting problems, check http://wiki.X.Org
>	to make sure that you have the latest version.
>Module Loader present
>Markers: (--) probed, (**) from config file, (==) default setting,
>	(++) from command line, (!!) notice, (II) informational,
>	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 15 23:10:04 2009
>(==) Using config file: "/etc/X11/xorg.conf"
>(==) ServerLayout "X.org Configured"
>(**) |-->Screen "Screen0" (0)
>(**) |   |-->Monitor "Monitor0"
>(**) |   |-->Device "Card0"
>(**) |-->Input Device "Mouse0"
>(**) |-->Input Device "Keyboard0"
>(==) Automatically adding devices
>(==) Automatically enabling devices
>(WW) `fonts.dir' not found (or not valid) in "/usr/X11R7/lib/X11/fonts/Speedo/".
>	Entry deleted from font path.
>	(Run 'mkfontdir' on "/usr/X11R7/lib/X11/fonts/Speedo/").
>(WW) `fonts.dir' not found (or not valid) in "/usr/X11R7/lib/X11/fonts/CID/".
>	Entry deleted from font path.
>	(Run 'mkfontdir' on "/usr/X11R7/lib/X11/fonts/CID/").
>(==) Including the default font path /usr/X11R7/lib/X11/fonts/misc/,/usr/X11R7/lib/X11/fonts/TTF/,/usr/X11R7/lib/X11/fonts/Speedo/,/usr/X11R7/lib/X11/fonts/Type1/,/usr/X11R7/lib/X11/fonts/CID/,/usr/X11R7/lib/X11/fonts/75dpi/,/usr/X11R7/lib/X11/fonts/100dpi/.
>(**) FontPath set to:
>	/usr/X11R7/lib/X11/fonts/misc/,
>	/usr/X11R7/lib/X11/fonts/TTF/,
>	/usr/X11R7/lib/X11/fonts/Type1/,
>	/usr/X11R7/lib/X11/fonts/75dpi/,
>	/usr/X11R7/lib/X11/fonts/100dpi/,
>	/usr/X11R7/lib/X11/fonts/misc/,
>	/usr/X11R7/lib/X11/fonts/TTF/,
>	/usr/X11R7/lib/X11/fonts/Speedo/,
>	/usr/X11R7/lib/X11/fonts/Type1/,
>	/usr/X11R7/lib/X11/fonts/CID/,
>	/usr/X11R7/lib/X11/fonts/75dpi/,
>	/usr/X11R7/lib/X11/fonts/100dpi/
>(**) RgbPath set to "/usr/X11R7/lib/X11/rgb"
>(**) ModulePath set to "/usr/X11R7/lib/modules"
>(II) Loader magic: 0x81b8a60
>(II) Module ABI versions:
>	X.Org ANSI C Emulation: 0.3
>	X.Org Video Driver: 2.0
>	X.Org XInput driver : 2.0
>	X.Org Server Extension : 0.3
>	X.Org Font Renderer : 0.5
>(II) Loader running on netbsd
>(II) LoadModule: "pcidata"
>(II) Loading /usr/X11R7/lib/modules//libpcidata.so
>(II) Module pcidata: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.0.0
>	ABI class: X.Org Video Driver, version 2.0
>(--) Using wscons driver in pcvt compatibility mode (version 3.32)
>(--) using VT number 5
>
>(II) PCI: Probing config type using method 1
>(II) PCI: Config type is 1
>(II) PCI: stages = 0x03, oldVal1 = 0x80000000, mode1Res1 = 0x80000000
>(WW) OS did not count PCI devices, guessing wildly
>(II) PCI: PCI scan (all values are in hex)
>(II) PCI: 00:00:0: chip 8086,7192 card 0000,0000 rev 03 class 06,00,00 hdr 00
>(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 01 class 06,01,00 hdr 80
>(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
>(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
>(II) PCI: 00:08:0: chip 5333,8811 card 0000,0000 rev 00 class 03,00,00 hdr 00
>(II) PCI: 00:0a:0: chip 1011,0009 card 0a00,2114 rev 20 class 02,00,00 hdr 00
>(II) PCI: End of PCI scan
>(II) Host-to-PCI bridge:
>(II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
>(II) Bus 0 I/O range:
>	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
>(II) Bus 0 non-prefetchable memory range:
>	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
>(II) Bus 0 prefetchable memory range:
>	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
>(II) PCI-to-ISA bridge:
>(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
>(--) PCI:*(0:8:0) S3 Inc. 86c764/765 [Trio32/64/64V+] rev 0, Mem @ 0xf8000000/26
>(II) Addressable bus resource ranges are
>	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
>	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
>(II) OS-reported resource ranges:
>	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>(II) Active PCI resource ranges:
>	[0] -1	0	0xfebff000 - 0xfebfffff (0x1000) MX[B]E
>	[1] -1	0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
>	[2] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]E
>	[3] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
>(II) Active PCI resource ranges after removing overlaps:
>	[0] -1	0	0xfebff000 - 0xfebfffff (0x1000) MX[B]E
>	[1] -1	0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
>	[2] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]E
>	[3] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
>(II) OS-reported resource ranges after removing overlaps with PCI:
>	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>(II) All system resource ranges:
>	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0xfebff000 - 0xfebfffff (0x1000) MX[B]E
>	[5] -1	0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
>	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>	[8] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]E
>	[9] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
>(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
>(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
>(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
>(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
>(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
>(II) "record" will be loaded. This was enabled by default and also specified in the config file.
>(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
>(II) LoadModule: "cfb"
>(II) Loading /usr/X11R7/lib/modules/extensions//libcfb.so
>(II) Module cfb: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.3
>(II) Loading sub module "mfb"
>(II) LoadModule: "mfb"
>(II) Loading /usr/X11R7/lib/modules/extensions//libmfb.so
>(II) Module mfb: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.3
>(II) LoadModule: "cfb32"
>(II) Loading /usr/X11R7/lib/modules/extensions//libcfb32.so
>(II) Module cfb32: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.3
>(II) Loading sub module "cfb"
>(II) LoadModule: "cfb"
>(II) Reloading /usr/X11R7/lib/modules/extensions//libcfb.so
>(II) Loading sub module "mfb"
>(II) LoadModule: "mfb"
>(II) Reloading /usr/X11R7/lib/modules/extensions//libmfb.so
>(II) LoadModule: "dbe"
>(II) Loading /usr/X11R7/lib/modules/extensions//libdbe.so
>(II) Module dbe: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 0.3
>(II) Loading extension DOUBLE-BUFFER
>(II) LoadModule: "dri"
>(II) Loading /usr/X11R7/lib/modules/extensions//libdri.so
>(II) Module dri: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 0.3
>(II) Loading extension XFree86-DRI
>(II) LoadModule: "extmod"
>(II) Loading /usr/X11R7/lib/modules/extensions//libextmod.so
>(II) Module extmod: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 0.3
>(II) Loading extension SHAPE
>(II) Loading extension MIT-SUNDRY-NONSTANDARD
>(II) Loading extension BIG-REQUESTS
>(II) Loading extension SYNC
>(II) Loading extension MIT-SCREEN-SAVER
>(II) Loading extension XC-MISC
>(II) Loading extension XFree86-VidModeExtension
>(II) Loading extension XFree86-Misc
>(II) Loading extension XFree86-DGA
>(II) Loading extension DPMS
>(II) Loading extension TOG-CUP
>(II) Loading extension Extended-Visual-Information
>(II) Loading extension XVideo
>(II) Loading extension XVideo-MotionCompensation
>(II) Loading extension X-Resource
>(II) LoadModule: "glx"
>(II) Loading /usr/X11R7/lib/modules/extensions//libglx.so
>(II) Module glx: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 0.3
>(==) AIGLX enabled
>(II) Loading extension GLX
>(II) LoadModule: "mfb"
>(II) Reloading /usr/X11R7/lib/modules/extensions//libmfb.so
>(II) LoadModule: "record"
>(II) Loading /usr/X11R7/lib/modules/extensions//librecord.so
>(II) Module record: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.13.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 0.3
>(II) Loading extension RECORD
>(II) LoadModule: "shadow"
>(II) Loading /usr/X11R7/lib/modules/extensions//libshadow.so
>(II) Module shadow: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.1.0
>	ABI class: X.Org ANSI C Emulation, version 0.3
>(II) LoadModule: "xtrap"
>(II) Loading /usr/X11R7/lib/modules/extensions//libxtrap.so
>(II) Module xtrap: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.0.0
>	Module class: X.Org Server Extension
>	ABI class: X.Org Server Extension, version 0.3
>(II) Loading extension DEC-XTRAP
>(II) LoadModule: "freetype"
>(II) Loading /usr/X11R7/lib/modules/fonts//libfreetype.so
>(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
>	compiled for 1.4.2, module version = 2.1.0
>	Module class: X.Org Font Renderer
>	ABI class: X.Org Font Renderer, version 0.5
>(II) Loading font FreeType
>(II) LoadModule: "type1"
>(II) Loading /usr/X11R7/lib/modules/fonts//libtype1.so
>(II) Module type1: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.0.2
>	Module class: X.Org Font Renderer
>	ABI class: X.Org Font Renderer, version 0.5
>(II) Loading font Type1
>(II) LoadModule: "s3"
>(II) Loading /usr/X11R7/lib/modules/drivers//s3_drv.so
>(II) Module s3: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 0.5.0
>	Module class: X.Org Video Driver
>	ABI class: X.Org Video Driver, version 2.0
>(II) LoadModule: "mouse"
>(II) Loading /usr/X11R7/lib/modules/drivers//mouse_drv.so
>(II) Module mouse: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.3.0
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 2.0
>(II) LoadModule: "kbd"
>(II) Loading /usr/X11R7/lib/modules/drivers//kbd_drv.so
>(II) Module kbd: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.3.1
>	Module class: X.Org XInput Driver
>	ABI class: X.Org XInput driver, version 2.0
>(II) S3: driver (version 0.5.0 for S3 chipset: 964-0, 964-1, 968,
>	Trio32/64, Aurora64V+, Trio64UV+, Trio64V2/DX/GX
>(II) Primary Device is: PCI 00:08:0
>(--) Chipset Trio32/64 found
>(II) resource ranges after xf86ClaimFixedResources() call:
>	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0xfebff000 - 0xfebfffff (0x1000) MX[B]E
>	[5] -1	0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
>	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>	[8] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]E
>	[9] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
>(II) resource ranges after probing:
>	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[4] -1	0	0xfebff000 - 0xfebfffff (0x1000) MX[B]E
>	[5] -1	0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
>	[6] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
>	[7] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
>	[8] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
>	[9] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[10] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>	[11] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]E
>	[12] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
>	[13] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
>	[14] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
>(II) Setting vga for screen 0.
>(II) Loading sub module "vgahw"
>(II) LoadModule: "vgahw"
>(II) Loading /usr/X11R7/lib/modules//libvgahw.so
>(II) Module vgahw: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 0.1.0
>	ABI class: X.Org Video Driver, version 2.0
>(II) s3(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>(==) s3(0): Depth 24, (==) framebuffer bpp 32
>(==) s3(0): RGB weight 888
>(==) s3(0): Default visual is TrueColor
>(II) Loading sub module "int10"
>(II) LoadModule: "int10"
>(II) Loading /usr/X11R7/lib/modules//libint10.so
>(II) Module int10: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.0.0
>	ABI class: X.Org Video Driver, version 2.0
>(WW) s3(0): remove MTRR a0000 - c0000
>(WW) s3(0): remove MTRR c0000 - 100000
>(WW) s3(0): Bad V_BIOS checksum
>(II) s3(0): Primary V_BIOS segment is: 0xc000
>(WW) s3(0): remove MTRR 0 - 1000
>(II) Loading sub module "vbe"
>(II) LoadModule: "vbe"
>(II) Loading /usr/X11R7/lib/modules//libvbe.so
>(II) Module vbe: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.1.0
>	ABI class: X.Org Video Driver, version 2.0
>(II) s3(0): VESA BIOS detected
>(II) s3(0): VESA VBE Version 2.0
>(II) s3(0): VESA VBE Total Mem: 4096 kB
>(II) s3(0): VESA VBE OEM: IBM SVGA BIOS, (C) 1993 International Business Machines
>(II) s3(0): VESA VBE OEM Software Rev: 0.0
>(==) s3(0): Using gamma correction (1.0, 1.0, 1.0)
>(**) s3(0): Chipset: "Trio32/64"
>(--) s3(0): Framebuffer @ 0xf8000000
>(--) s3(0): videoRam = 4096 Kb
>(II) Loading sub module "ramdac"
>(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
>(--) s3(0): MCLK 14.318 Mhz
>(--) s3(0): RefClock: 16000
>(--) s3(0): Max pixel clock at this depth is 50 Mhz
>(II) s3(0): Monitor0: Using hsync range of 30.00-85.00 kHz
>(II) s3(0): Monitor0: Using vrefresh range of 50.00-160.00 Hz
>(II) s3(0): Clock range:  15.60 to  50.00 MHz
>(II) s3(0): Not using default mode "1280x960" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1280x960" (insufficient memory for mode)
>(II) s3(0): Not using default mode "640x480" (hsync out of range)
>(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
>(II) s3(0): Not using default mode "640x512" (hsync out of range)
>(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
>(II) s3(0): Not using default mode "800x600" (hsync out of range)
>(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
>(II) s3(0): Not using default mode "800x600" (hsync out of range)
>(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
>(II) s3(0): Not using default mode "800x600" (hsync out of range)
>(II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode)
>(II) s3(0): Not using default mode "896x672" (hsync out of range)
>(II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode)
>(II) s3(0): Not using default mode "928x696" (hsync out of range)
>(II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode)
>(II) s3(0): Not using default mode "928x696" (hsync out of range)
>(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
>(II) s3(0): Not using default mode "960x720" (hsync out of range)
>(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
>(II) s3(0): Not using default mode "960x720" (hsync out of range)
>(II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1600x1024" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
>(II) s3(0): Not using default mode "960x720" (hsync out of range)
>(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1024x768" (hsync out of range)
>(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1024x768" (hsync out of range)
>(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
>(II) s3(0): Not using default mode "1024x768" (hsync out of range)
>(II) s3(0): Not using mode "1152x864" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using mode "1152x768" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using default mode "1024x768" (width too large for virtual size)
>(II) s3(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using mode "896x672" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using mode "832x624" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using mode "700x525" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using mode "640x512" (bad mode clock/interlace/doublescan)
>(II) s3(0): Not using mode "576x432" (bad mode clock/interlace/doublescan)
>(--) s3(0): Virtual size is 800x600 (pitch 800)
>(**) s3(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
>(II) s3(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
>(**) s3(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
>(II) s3(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
>(**) s3(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
>(II) s3(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
>(**) s3(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
>(II) s3(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
>(**) s3(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
>(II) s3(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
>(**) s3(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
>(II) s3(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
>(**) s3(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
>(II) s3(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
>(**) s3(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
>(II) s3(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
>(**) s3(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
>(II) s3(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
>(**) s3(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
>(II) s3(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
>(**) s3(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
>(II) s3(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
>(**) s3(0):  Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
>(II) s3(0): Modeline "576x384"x54.8   32.50  576 589 657 736  384 385 388 403 doublescan +hsync +vsync (44.2 kHz)
>(**) s3(0):  Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D)
>(II) s3(0): Modeline "512x384"x85.0   47.25  512 536 584 688  384 384 386 404 doublescan +hsync +vsync (68.7 kHz)
>(**) s3(0):  Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
>(II) s3(0): Modeline "512x384"x75.0   39.38  512 520 568 656  384 384 386 400 doublescan +hsync +vsync (60.0 kHz)
>(**) s3(0):  Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
>(II) s3(0): Modeline "512x384"x70.1   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync (56.5 kHz)
>(**) s3(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
>(II) s3(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz)
>(**) s3(0):  Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
>(II) s3(0): Modeline "512x384"x87.1   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync (35.5 kHz)
>(**) s3(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
>(II) s3(0): Modeline "416x312"x74.7   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync (49.7 kHz)
>(**) s3(0):  Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
>(II) s3(0): Modeline "400x300"x85.3   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync (53.7 kHz)
>(**) s3(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
>(II) s3(0): Modeline "400x300"x75.1   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync (46.9 kHz)
>(**) s3(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
>(II) s3(0): Modeline "400x300"x72.2   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync (48.1 kHz)
>(**) s3(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
>(II) s3(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
>(**) s3(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
>(II) s3(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
>(**) s3(0):  Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
>(II) s3(0): Modeline "320x240"x85.2   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync (43.3 kHz)
>(**) s3(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
>(II) s3(0): Modeline "320x240"x75.0   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync (37.5 kHz)
>(**) s3(0):  Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
>(II) s3(0): Modeline "320x240"x72.8   15.75  320 332 352 416  240 244 246 260 doublescan -hsync -vsync (37.9 kHz)
>(**) s3(0):  Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
>(II) s3(0): Modeline "360x200"x85.0   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync (37.9 kHz)
>(**) s3(0):  Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
>(II) s3(0): Modeline "320x200"x85.3   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync (37.9 kHz)
>(**) s3(0):  Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
>(II) s3(0): Modeline "320x175"x85.3   15.75  320 336 368 416  175 191 192 222 doublescan +hsync -vsync (37.9 kHz)
>(==) s3(0): DPI set to (96, 96)
>(II) Loading sub module "fb"
>(II) LoadModule: "fb"
>(II) Loading /usr/X11R7/lib/modules//libfb.so
>(II) Module fb: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.0.0
>	ABI class: X.Org ANSI C Emulation, version 0.3
>(II) Loading sub module "xaa"
>(II) LoadModule: "xaa"
>(II) Loading /usr/X11R7/lib/modules//libxaa.so
>(II) Module xaa: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.2.0
>	ABI class: X.Org Video Driver, version 2.0
>(--) Depth 24 pixmap format is 32 bpp
>(II) do I need RAC?  No, I don't.
>(II) resource ranges after preInit:
>	[0] 0	0	0xf8000000 - 0xfbffffff (0x4000000) MS[B]
>	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>	[5] -1	0	0xfebff000 - 0xfebfffff (0x1000) MX[B]E
>	[6] -1	0	0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
>	[7] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
>	[8] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
>	[9] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
>	[10] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>	[11] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>	[12] -1	0	0x0000ec00 - 0x0000ecff (0x100) IX[B]E
>	[13] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
>	[14] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
>	[15] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
>(WW) s3(0): set MTRR f8000000 - f8400000
>(WW) s3(0): remove MTRR a0000 - b0000
>(==) s3(0): Backing store disabled
>(II) s3(0): Using XFree86 Acceleration Architecture (XAA)
>	Screen to screen bit blits
>	Solid filled rectangles
>	8x8 color pattern filled rectangles
>	Solid Lines
>(II) s3(0): Acceleration enabled
>(II) s3(0): Using PIO
>(II) s3(0): Using SW cursor
>(==) RandR enabled
>(II) Setting vga for screen 0.
>(II) Initializing built-in extension MIT-SHM
>(II) Initializing built-in extension XInputExtension
>(II) Initializing built-in extension XTEST
>(II) Initializing built-in extension XKEYBOARD
>(II) Initializing built-in extension XC-APPGROUP
>(II) Initializing built-in extension XAccessControlExtension
>(II) Initializing built-in extension SECURITY
>(II) Initializing built-in extension XINERAMA
>(II) Initializing built-in extension XFIXES
>(II) Initializing built-in extension XFree86-Bigfont
>(II) Initializing built-in extension RENDER
>(II) Initializing built-in extension RANDR
>(II) Initializing built-in extension COMPOSITE
>(II) Initializing built-in extension DAMAGE
>(II) Initializing built-in extension XEVIE
>(II) Loading sub module "GLcore"
>(II) LoadModule: "GLcore"
>(II) Loading /usr/X11R7/lib/modules/extensions//libGLcore.so
>(II) Module GLcore: vendor="X.Org Foundation"
>	compiled for 1.4.2, module version = 1.0.0
>	ABI class: X.Org Server Extension, version 0.3
>(II) GLX: Initialized MESA-PROXY GL provider for screen 0
>(**) Option "Protocol" "wsmouse"
>(**) Mouse0: Protocol: wsmouse
>(**) Option "CorePointer"
>(**) Mouse0: always reports core events
>(**) Option "Device" "/dev/wsmouse"
>(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
>(**) Option "ZAxisMapping" "4 5 6 7"
>(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
>(**) Mouse0: Buttons: 11
>(**) Option "CoreKeyboard"
>(**) Keyboard0: always reports core events
>(**) Option "Protocol" "standard"
>(**) Keyboard0: Protocol: standard
>(**) Option "AutoRepeat" "500 30"
>(**) Option "XkbRules" "xorg"
>(**) Keyboard0: XkbRules: "xorg"
>(**) Option "XkbModel" "pc105"
>(**) Keyboard0: XkbModel: "pc105"
>(**) Option "XkbLayout" "us"
>(**) Keyboard0: XkbLayout: "us"
>(**) Option "CustomKeycodes" "off"
>(**) Keyboard0: CustomKeycodes disabled
>(II) evaluating device (Keyboard0)
>(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
>(II) evaluating device (Mouse0)
>(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
>Could not init font path element /usr/X11R7/lib/X11/fonts/Speedo/, removing from list!
>Could not init font path element /usr/X11R7/lib/X11/fonts/CID/, removing from list!

Actions: View

Attachments on bug 22719: 28645 | 28646 | 28651 | 28652

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.