Attachment 30416 Details for Bug 24282 – dmesg output with new patch with boot options i915.modeset=1 drm.debug=0x06

dmesg output with new patch with boot options i915.modeset=1 drm.debug=0x06

dmesg-new_drm_debug.txt (text/plain), 35.29 KB, created by Markus Heinz on 2009-10-14 13:40:18 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Markus Heinz

Created: 2009-10-14 13:40:18 UTC

Size: 35.29 KB

patch

obsolete

>Linux version 2.6.32-rc2 (markus@Darksun) (gcc version 4.4.1 (CRUX) (GCC) ) #1 SMP Wed Oct 14 22:24:17 CEST 2009
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f6a0000 (usable)
> BIOS-e820: 000000007f6a0000 - 000000007f6ae000 (ACPI data)
> BIOS-e820: 000000007f6ae000 - 000000007f6f0000 (ACPI NVS)
> BIOS-e820: 000000007f6f0000 - 000000007f6fe000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>DMI present.
>last_pfn = 0x7f6a0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-CBFFF write-protect
>  CC000-DFFFF uncachable
>  E0000-EFFFF write-through
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F80000000 write-back
>  1 base 07F700000 mask FFFF00000 uncachable
>  2 base 07F800000 mask FFF800000 uncachable
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 01c00000
>init_memory_mapping: 0000000000000000-00000000377fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037400000 page 2M
> 0037400000 - 00377fe000 page 4k
>kernel direct mapping tables up to 377fe000 @ 7000-c000
>ACPI: RSDP 000f9650 00014 (v00 ACPIAM)
>ACPI: RSDT 7f6a0000 00048 (v01 LENOVO TC-03    20080704 MSFT 00000097)
>ACPI: FACP 7f6a0200 00084 (v01 LENOVO OEMFACP  20080704 MSFT 00000097)
>ACPI: DSDT 7f6a05c0 05A7D (v01  1AAAA 1AAAA000 00000000 INTL 20051117)
>ACPI: FACS 7f6ae000 00040
>ACPI: APIC 7f6a0390 0006C (v01 LENOVO OEMAPIC  20080704 MSFT 00000097)
>ACPI: MCFG 7f6a0400 0003C (v01 LENOVO OEMMCFG  20080704 MSFT 00000097)
>ACPI: SLIC 7f6a0440 00176 (v01 LENOVO TC-03    20080704 MSFT 00000097)
>ACPI: OEMB 7f6ae040 00071 (v01 LENOVO AMI_OEM  20080704 MSFT 00000097)
>ACPI: HPET 7f6a6040 00038 (v01 LENOVO OEMHPET  20080704 MSFT 00000097)
>ACPI: ASF! 7f6a6078 000B1 (v32 LEGEND I865PASF 00000001 INTL 20051117)
>ACPI: GSCI 7f6ae0c0 02024 (v01 LENOVO GMCHSCI  20080704 MSFT 00000097)
>ACPI: SSDT 7f6b1330 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
>ACPI: Local APIC address 0xfee00000
>1150MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 0 - 377fe000
>  node 0 low ram: 00000000 - 377fe000
>  node 0 bootmap 00008000 - 0000ef00
>(8 early reservations) ==> bootmem [0000000000 - 00377fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
>  #3 [0001000000 - 000170c98c]    TEXT DATA BSS ==> [0001000000 - 000170c98c]
>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #5 [000170d000 - 0001714113]              BRK ==> [000170d000 - 0001714113]
>  #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
>  #7 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
>found SMP MP-table at [c00ff780] ff780
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x0007f6a0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007f6a0
>On node 0 totalpages: 521791
>free_area_init_node: node 0, pgdat c163e080, node_mem_map c1716000
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3967 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 2302 pages used for memmap
>  HighMem zone: 292260 pages, LIFO batch:31
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 7f6fe000 (gap: 7f6fe000:7f702000)
>NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 11 pages/cpu @c2800000 s21848 r0 d23208 u1048576
>pcpu-alloc: s21848 r0 d23208 u1048576 alloc=1*4194304
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517713
>Kernel command line: BOOT_IMAGE=CRUX-2.6.32-rc2 ro root=805 quiet i915.modeset=1 drm.debug=0x06
>Unknown boot option `i915.modeset=1': ignoring
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Initializing HighMem for node 0 (000377fe:0007f6a0)
>Memory: 2061432k/2087552k available (4425k kernel code, 24616k reserved, 2000k data, 428k init, 1178248k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff6b000 - 0xfffff000   ( 592 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc1647000 - 0xc16b2000   ( 428 kB)
>      .data : 0xc14524d2 - 0xc16468c8   (2000 kB)
>      .text : 0xc1000000 - 0xc14524d2   (4425 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>Hierarchical RCU implementation.
>NR_IRQS:384
>Console: colour dummy device 80x25
>console [tty0] enabled
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2393.993 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.98 BogoMIPS (lpj=9575972)
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>using mwait in idle threads.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20090903
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>APIC calibration not consistent with PM-Timer: 115ms instead of 100ms
>APIC delta adjusted to PM-Timer: 1662498 (1928472)
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4787.97 BogoMIPS (lpj=9575955)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Booting processor 2 APIC 0x2 ip 0x6000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4788.01 BogoMIPS (lpj=9576027)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 2
>CPU2: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>Booting processor 3 APIC 0x3 ip 0x6000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4788.00 BogoMIPS (lpj=9576008)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 3
>CPU3: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>Total of 4 processors activated (19151.98 BogoMIPS).
>NET: Registered protocol family 16
>EISA bus registered
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG for extended config space
>ACPI: Enumerating devices from [\]
>ACPI Warning: Incorrect checksum in table [OEMB] - 49, should be 44 (20090903/tbutils-314)
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:02.0: reg 10 32bit mmio: [0xfea80000-0xfeafffff]
>pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07]
>pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
>pci 0000:00:02.0: reg 1c 32bit mmio: [0xfe900000-0xfe9fffff]
>pci 0000:00:02.1: reg 10 32bit mmio: [0xfe880000-0xfe8fffff]
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xfea78000-0xfea7bfff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.1: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f]
>pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f]
>pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f]
>pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xfea77c00-0xfea77fff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
>pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
>pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
>pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
>pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
>pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
>pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087]
>pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003]
>pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07]
>pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883]
>pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
>pci 0000:02:00.0: reg 10 64bit mmio: [0xfebfc000-0xfebfffff]
>pci 0000:02:00.0: reg 18 io port: [0xe800-0xe8ff]
>pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfebc0000-0xfebdffff]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
>pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
>pci 0000:00:1e.0: transparent bridge
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>system 00:07: ioport range 0xa00-0xa0f has been reserved
>system 00:07: ioport range 0xa10-0xa1f has been reserved
>system 00:07: ioport range 0xa20-0xa2f has been reserved
>system 00:07: ioport range 0xa30-0xa3f has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x87f has been reserved
>system 00:08: ioport range 0x480-0x4bf has been reserved
>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
>system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
>system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0f: iomem range 0x0-0x9ffff could not be reserved
>system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
>system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0f: iomem range 0x100000-0x7f6fffff could not be reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
>pci 0000:00:1c.0:   MEM window: 0x80000000-0x801fffff
>pci 0000:00:1c.0:   PREFETCH window: 0x00000080200000-0x000000803fffff
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.1:   IO window: 0xe000-0xefff
>pci 0000:00:1c.1:   MEM window: 0xfeb00000-0xfebfffff
>pci 0000:00:1c.1:   PREFETCH window: 0x00000080400000-0x000000805fffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: disabled
>pci 0000:00:1e.0:   PREFETCH window: disabled
>pci 0000:00:1c.0: enabling device (0104 -> 0107)
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
>pci_bus 0000:01: resource 0 io:  [0x1000-0x1fff]
>pci_bus 0000:01: resource 1 mem: [0x80000000-0x801fffff]
>pci_bus 0000:01: resource 2 pref mem [0x80200000-0x803fffff]
>pci_bus 0000:02: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
>pci_bus 0000:02: resource 2 pref mem [0x80400000-0x805fffff]
>pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>highmem bounce pool size: 64 pages
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>Slow work thread pool: Starting up
>Slow work thread pool: Ready
>NTFS driver 2.1.29 [Flags: R/W].
>QNX4 filesystem 0.2.3 registered.
>fuse init (API version 7.13)
>JFS: nTxBlock = 8192, nTxLock = 65536
>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>msgmni has been set to 1727
>alg: No test for cipher_null (cipher_null-generic)
>alg: No test for ecb(cipher_null) (ecb-cipher_null)
>alg: No test for digest_null (digest_null-generic)
>alg: No test for compress_null (compress_null-generic)
>alg: No test for fcrypt (fcrypt-generic)
>alg: No test for stdrng (krng)
>alg: No test for ghash (ghash-generic)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered (default)
>io scheduler cfq registered
>pci 0000:00:02.0: Boot video device
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8600000, using 6144k, total 8128k
>vesafb: mode is 1024x768x32, linelength=4096, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>ACPI: SSDT 7f6b00f0 00277 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
>processor LNXCPU:00: registered as cooling_device0
>ACPI: SSDT 7f6b0580 00277 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
>processor LNXCPU:01: registered as cooling_device1
>ACPI: SSDT 7f6b0a10 00277 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
>processor LNXCPU:02: registered as cooling_device2
>ACPI: SSDT 7f6b0ea0 00277 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
>processor LNXCPU:03: registered as cooling_device3
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>lp: driver loaded but no devices found
>Real Time Clock Driver v1.12b
>Non-volatile memory driver v1.3
>ppdev: user-space parallel port driver
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel G33 Chipset
>agpgart-intel 0000:00:00.0: detected 7164K stolen memory
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>[drm] Initialized drm 1.1.0 20060810
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>parport_pc 00:06: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>brd: module loaded
>loop: module loaded
>nbd: registered device at major 43
>Uniform Multi-Platform E-IDE driver
>piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x01)
>PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>piix 0000:00:1f.1: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7
>    ide1: BM-DMA at 0xffa8-0xffaf
>Probing IDE interface ide0...
>Switched to high resolution mode on CPU 3
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>Probing IDE interface ide1...
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>ide-gd driver 1.18
>ide-cd driver 5.00
>ata_piix 0000:00:1f.2: version 2.13
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19
>ata2: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19
>NET3 PLIP version 2.4-parport gniibe@mri.co.jp
>plip0: Parallel port at 0x378, using IRQ 7.
>sky2 driver version 1.25
>sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>sky2 0000:02:00.0: setting latency timer to 64
>sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
>sky2 eth0: addr 00:21:97:06:e1:0b
>PPP generic driver version 2.4.2
>PPP Deflate Compression module registered
>PPP BSD Compression module registered
>NET: Registered protocol family 24
>SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
>CSLIP: code copyright 1989 Regents of the University of California.
>SLIP linefill/keepalive option.
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea77c00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.32-rc2 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1d.7
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.32-rc2 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.32-rc2 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.32-rc2 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.2
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.32-rc2 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.3
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /devices/platform/pcspkr/input/input2
>Linux video capture interface: v2.00
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.1.0 loaded
>device-mapper: multipath round-robin: version 1.0.0 loaded
>EISA: Probing bus 0 at eisa.0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Advanced Linux Sound Architecture Driver Version 1.0.21.
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>hda_codec: ALC662 rev1: BIOS auto-probing.
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3
>ALSA device list:
>  #0: HDA Intel at 0xfea78000 irq 16
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ctnetlink v0.93: registering with nfnetlink.
>xt_time: kernel timezone is -0000
>IPv4 over IPv4 tunneling driver
>ip_tables: (C) 2000-2006 Netfilter Core Team
>arp_tables: (C) 2002 David S. Miller
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>tunl0: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>IPv6 over IPv4 tunneling driver
>sit0: Disabled Privacy Extensions
>ip6tnl0: Disabled Privacy Extensions
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ata1.00: ATA-8: WDC WD3200AAJS-08B4A0, 01.03A01, max UDMA/100
>ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.01: ATAPI: TSSTcorp CDDVDW TS-H653B, LE05, max UDMA/33
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-0 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:1:0: CD-ROM            TSSTcorp CDDVDW TS-H653B  LE05 PQ: 0 ANSI: 5
> sda: sda1 sda2 sda3 sda4 <sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>sr 0:0:1:0: Attached scsi generic sg1 type 5
> sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
> sda3: <solaris: [s0] sda12 [s2] sda13 [s8] sda14 [s9] sda15 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb 1-2: new high speed USB device using ehci_hcd and address 3
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with writeback data mode.
>VFS: Mounted root (ext3 filesystem) readonly on device 8:5.
>Freeing unused kernel memory: 428k freed
>usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
>usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 1-2: Product: USB2.0 Hub
>usb 1-2: configuration #1 chosen from 1 choice
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 4 ports detected
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>usb 2-1: New USB device found, idVendor=04b3, idProduct=3025
>usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: USB NetVista Full Width Keyboard.
>usb 2-1: Manufacturer: LITE-ON Technology
>usb 2-1: configuration #1 chosen from 1 choice
>input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
>generic-usb 0003:04B3:3025.0001: input: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:1d.0-1/input0
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>usb 3-1: New USB device found, idVendor=04b3, idProduct=310c
>usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>usb 3-1: Product: USB Optical Mouse
>usb 3-1: configuration #1 chosen from 1 choice
>input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input5
>generic-usb 0003:04B3:310C.0002: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-1/input0
>usb 1-2.2: new full speed USB device using ehci_hcd and address 5
>usb 1-2.2: New USB device found, idVendor=06bd, idProduct=2061
>usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2.2: Product:  Snapscan1212u_2
>usb 1-2.2: Manufacturer: AGFA
>usb 1-2.2: configuration #1 chosen from 1 choice
>usb 1-2.3: new full speed USB device using ehci_hcd and address 6
>usb 1-2.3: New USB device found, idVendor=03f0, idProduct=6004
>usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-2.3: Product: deskjet 5550
>usb 1-2.3: Manufacturer: hp
>usb 1-2.3: SerialNumber: MY3331P1DS2L
>usb 1-2.3: configuration #1 chosen from 1 choice
>usb 1-2.4: new high speed USB device using ehci_hcd and address 7
>usb 1-2.4: New USB device found, idVendor=15a4, idProduct=9016
>usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-2.4: Product: DVB-T 2
>usb 1-2.4: Manufacturer: Afatech
>usb 1-2.4: SerialNumber: 010101010600001
>usb 1-2.4: configuration #1 chosen from 1 choice
>Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8
>input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.4/1-2.4:1.1/input/input6
>generic-usb 0003:15A4:9016.0003: input: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:1d.7-2.4/input1
>usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6004
>usbcore: registered new interface driver usblp
>dvb-usb: found a 'Afatech AF9015 DVB-T USB2.0 stick' in warm state.
>dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
>DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick)
>af9013: firmware version:4.95.0
>DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
>MT2060: successfully identified (IF1 = 1220)
>dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected.
>usbcore: registered new interface driver dvb_usb_af9015
>EXT3 FS on sda5, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>Adding 4008176k swap on /dev/sda7.  Priority:-1 extents:1 across:4008176k 
>sky2 eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>[drm] set up 7M of stolen space
>Switch to SDVO SPD ROM
>Can't read the SDVO SPD ROM
>Switch to SDVO DDC1
>Can't read the SDVO DDC1
>Switch to SDVO DDC2
>Can't read the SDVO DDC2
>Switch to SDVO DDC3
>Can't read the SDVO DDC3
>[drm:intel_sdvo_init], SDVOB device VID/DID: 03:94.02, clock range 25MHz - 165MHz, input 1: N, input 2: Y, output 1: Y, output 2: N
>[drm:intel_sdvo_read_byte], i2c transfer returned -6
>[drm:intel_sdvo_init], No SDVO device found on SDVOC
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 3 9
>Read EDID for connector DVI-D-1, DDC bus name intel drm SDVOB DDC
>Incorrect EDID
>Read EDID for connector DVI-D-1, DDC bus name intel drm SDVOB/VGA
>Incorrect EDID
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>------------[ cut here ]------------
>WARNING: at drivers/gpu/drm/drm_crtc_helper.c:953 drm_helper_initial_config+0x2f/0x4b [drm_kms_helper]()
>Hardware name: 97027RG
>Connected connector with 0 modes
>Modules linked in: i915(+) drm_kms_helper video backlight mt2060 af9013 dvb_usb_af9015 dvb_usb dvb_core usblp usbhid
>Pid: 1757, comm: modprobe Not tainted 2.6.32-rc2 #1
>Call Trace:
> [<c10245ef>] warn_slowpath_common+0x65/0x7c
> [<f856c464>] ? drm_helper_initial_config+0x2f/0x4b [drm_kms_helper]
> [<c102463a>] warn_slowpath_fmt+0x24/0x27
> [<f856c464>] drm_helper_initial_config+0x2f/0x4b [drm_kms_helper]
> [<f8576e42>] i915_driver_load+0xd5a/0xdfb [i915]
> [<c129bd08>] drm_get_dev+0x2c3/0x3a3
> [<f8593b78>] i915_pci_probe+0xd/0x96 [i915]
> [<c123a6e2>] local_pci_probe+0xe/0x10
> [<c123b0b4>] pci_device_probe+0x43/0x66
> [<c12b1f21>] driver_probe_device+0x79/0xed
> [<c12b1fd8>] __driver_attach+0x43/0x5f
> [<c12b1946>] bus_for_each_dev+0x3d/0x67
> [<c12b1dfa>] driver_attach+0x14/0x16
> [<c12b1f95>] ? __driver_attach+0x0/0x5f
> [<c12b13f7>] bus_add_driver+0x94/0x1be
> [<c1226acf>] ? kset_find_obj+0x23/0x4e
> [<c12b2207>] driver_register+0x79/0xe0
> [<c123b279>] __pci_register_driver+0x38/0x95
> [<c129870d>] drm_init+0x5a/0xb2
> [<f85ae000>] ? i915_init+0x0/0x4d [i915]
> [<f85ae04b>] i915_init+0x4b/0x4d [i915]
> [<c1001139>] do_one_initcall+0x4c/0x131
> [<c1044177>] sys_init_module+0xa7/0x1dc
> [<c1002888>] sysenter_do_call+0x12/0x26
>---[ end trace 4770e8047621cc85 ]---
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 5 enabled? no
>[drm:drm_enable_connectors], connector 7 enabled? no
>[drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[drm:i915_driver_open], 
>[drm:i915_driver_open], 
>[drm:drm_mode_getresources], Counted 2 2 2
>[drm:drm_mode_getresources], Counted 2 2 2
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 3 0
>Read EDID for connector DVI-D-1, DDC bus name intel drm SDVOB DDC
>Incorrect EDID
>Read EDID for connector DVI-D-1, DDC bus name intel drm SDVOB/VGA
>Incorrect EDID
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 3 0
>Read EDID for connector DVI-D-1, DDC bus name intel drm SDVOB DDC
>Incorrect EDID
>Read EDID for connector DVI-D-1, DDC bus name intel drm SDVOB/VGA
>Incorrect EDID
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 5:
>[drm:drm_helper_probe_single_connector_modes], VGA-1
>[drm:drm_helper_probe_single_connector_modes], VGA-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 3 0
>Read EDID for connector DVI-D-1, DDC bus name intel drm SDVOB DDC
>Incorrect EDID
>Read EDID for connector DVI-D-1, DDC bus name intel drm SDVOB/VGA
>Incorrect EDID
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected
>[drm:drm_mode_getconnector], connector id 7:
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1
>[drm:intel_sdvo_detect], SDVO response 3 0
>Read EDID for connector DVI-D-1, DDC bus name intel drm SDVOB DDC
>Incorrect EDID
>Read EDID for connector DVI-D-1, DDC bus name intel drm SDVOB/VGA
>Incorrect EDID
>[drm:drm_helper_probe_single_connector_modes], DVI-D-1 is disconnected

Actions: View

Attachments on bug 24282: 30001 | 30002 | 30192 | 30229 | 30250 | 30251 | 30277 | 30305 | 30356 | 30357 | 30370 | 30416 | 30417 | 30476 | 30590 | 30610

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.