Attachment 31927 Details for Bug 25559 – dmesg output

dmesg output

dmesg-output (text/plain), 39.75 KB, created by Bob Ham on 2009-12-10 04:01:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bob Ham

Created: 2009-12-10 04:01:41 UTC

Size: 39.75 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.32-drm-radeon-testing-18 (root@myrtle) (gcc version 4.3.4 (Debian 4.3.4-6) ) #3 SMP PREEMPT Thu Dec 10 11:45:06 GMT 2009
>Command line: root=/dev/sda5 ro earlyprintk=vga pci=nommconf 
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
> BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data)
> BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS)
> BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>bootconsole [earlyvga0] enabled
>PCI: Unknown option `nommconf'
>DMI present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>last_pfn = 0x130000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-DFFFF write-protect
>  E0000-EFFFF write-through
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask F00000000 write-back
>  1 base 100000000 mask FE0000000 write-back
>  2 base 120000000 mask FF0000000 write-back
>  3 base 0D0000000 mask FF0000000 uncachable
>  4 base 0E0000000 mask FE0000000 uncachable
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xcff70 max_arch_pfn = 0x400000000
>initial memory mapped : 0 - 20000000
>init_memory_mapping: 0000000000000000-00000000cff70000
> 0000000000 - 00cfe00000 page 2M
> 00cfe00000 - 00cff70000 page 4k
>kernel direct mapping tables up to cff70000 @ 10000-16000
>init_memory_mapping: 0000000100000000-0000000130000000
> 0100000000 - 0130000000 page 2M
>kernel direct mapping tables up to 130000000 @ 14000-1a000
>RAMDISK: 37af5000 - 37fefc6f
>ACPI: RSDP 00000000000faf00 00024 (v02 ACPIAM)
>ACPI: XSDT 00000000cff70100 0005C (v01 A_M_I_ OEMXSDT  06000812 MSFT 00000097)
>ACPI: FACP 00000000cff70290 000F4 (v03 A_M_I_ OEMFACP  06000812 MSFT 00000097)
>ACPI: DSDT 00000000cff70440 09647 (v01  A0993 A0993001 00000001 INTL 20060113)
>ACPI: FACS 00000000cff7e000 00040
>ACPI: APIC 00000000cff70390 0006C (v01 A_M_I_ OEMAPIC  06000812 MSFT 00000097)
>ACPI: MCFG 00000000cff70400 0003C (v01 A_M_I_ OEMMCFG  06000812 MSFT 00000097)
>ACPI: OEMB 00000000cff7e040 00081 (v01 A_M_I_ AMI_OEM  06000812 MSFT 00000097)
>ACPI: HPET 00000000cff79a90 00038 (v01 A_M_I_ OEMHPET  06000812 MSFT 00000097)
>ACPI: OSFR 00000000cff79ad0 000B0 (v01 A_M_I_ OEMOSFR  06000812 MSFT 00000097)
>ACPI: SSDT 00000000cff7eb20 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20060113)
>ACPI: Local APIC address 0xfee00000
>(8 early reservations) ==> bootmem [0000000000 - 0130000000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 00018680a4]    TEXT DATA BSS ==> [0001000000 - 00018680a4]
>  #3 [0037af5000 - 0037fefc6f]          RAMDISK ==> [0037af5000 - 0037fefc6f]
>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #5 [0001869000 - 0001869270]              BRK ==> [0001869000 - 0001869270]
>  #6 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]
>  #7 [0000014000 - 0000015000]          PGTABLE ==> [0000014000 - 0000015000]
>found SMP MP-table at [ffff8800000ff780] ff780
> [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00130000
>Movable zone start PFN for each node
>early_node_map[3] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x000cff70
>    0: 0x00100000 -> 0x00130000
>On node 0 totalpages: 1048319
>  DMA zone: 56 pages used for memmap
>  DMA zone: 104 pages reserved
>  DMA zone: 3823 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 833448 pages, LIFO batch:31
>  Normal zone: 2688 pages used for memmap
>  Normal zone: 193920 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x8086a301 base: 0xfed00000
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>nr_irqs_gsi: 24
>Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
>NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>PERCPU: Embedded 27 pages/cpu @ffff880028200000 s79064 r8192 d23336 u524288
>pcpu-alloc: s79064 r8192 d23336 u524288 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1031191
>Kernel command line: root=/dev/sda5 ro earlyprintk=vga pci=nommconf 
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Initializing CPU#0
>Checking aperture...
>No AGP bridge found
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
>software IO TLB at phys 0x20000000 - 0x24000000
>Memory: 4046476k/4980736k available (5270k kernel code, 787460k absent, 145848k reserved, 2341k data, 460k init)
>Experimental preemptable hierarchical RCU implementation.
>NR_IRQS:384
>Extended CMOS year: 2000
>Console: colour VGA+ 80x25
>console [tty0] enabled, bootconsole disabled
>hpet clockevent registered
>HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>Fast TSC calibration using PIT
>Detected 2999.791 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.58 BogoMIPS (lpj=2999791)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>CPU0: Thermal monitoring enabled (TM2)
>using mwait in idle threads.
>Performance Events: Core2 events, Intel PMU driver.
>... version:                2
>... bit width:              40
>... generic registers:      2
>... value mask:             000000ffffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   3
>... event mask:             0000000700000003
>ACPI: Core revision 20090903
>Setting APIC routing to flat
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 06
>Booting processor 1 APIC 0x1 ip 0x6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5999.07 BogoMIPS (lpj=2999539)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 6144K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>CPU1: Intel(R) Core(TM)2 Duo CPU     E8400  @ 3.00GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>Total of 2 processors activated (11998.66 BogoMIPS).
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Executed 1 blocks of module-level executable AML code
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:01.0: PME# disabled
>pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f]
>pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]
>pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f]
>pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe8ffc00-0xfe8fffff]
>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1a.7: PME# disabled
>pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe8f8000-0xfe8fbfff]
>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1b.0: PME# disabled
>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.0: PME# disabled
>pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>pci 0000:00:1c.5: PME# disabled
>pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f]
>pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
>pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f]
>pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe8ff800-0xfe8ffbff]
>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>pci 0000:00:1d.7: PME# disabled
>pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
>pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
>pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007]
>pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03]
>pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887]
>pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803]
>pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f]
>pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f]
>pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe8ff400-0xfe8ff4ff]
>pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
>pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007]
>pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03]
>pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887]
>pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803]
>pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f]
>pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f]
>pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
>pci 0000:01:00.0: reg 18 64bit mmio: [0xfe9e0000-0xfe9effff]
>pci 0000:01:00.0: reg 20 io port: [0xc000-0xc0ff]
>pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe9c0000-0xfe9dffff]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
>pci 0000:00:01.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
>pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
>pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
>pci 0000:02:00.0: reg 10 64bit mmio: [0xfeac0000-0xfeafffff]
>pci 0000:02:00.0: reg 18 io port: [0xdc00-0xdc7f]
>pci 0000:02:00.0: PME# supported from D3hot D3cold
>pci 0000:02:00.0: PME# disabled
>pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
>pci 0000:00:1c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff]
>pci 0000:04:00.0: reg 10 32bit mmio pref: [0xfdffe000-0xfdffefff]
>pci 0000:04:00.1: reg 10 32bit mmio pref: [0xfdfff000-0xfdffffff]
>pci 0000:04:01.0: reg 10 io port: [0xe800-0xe8ff]
>pci 0000:04:01.0: reg 14 32bit mmio: [0xfebffc00-0xfebffcff]
>pci 0000:04:01.0: reg 30 32bit mmio pref: [0xfebe0000-0xfebeffff]
>pci 0000:04:01.0: PME# supported from D0
>pci 0000:04:01.0: PME# disabled
>pci 0000:04:02.0: reg 10 io port: [0xe480-0xe49f]
>pci 0000:04:02.0: supports D1 D2
>pci 0000:04:02.1: reg 10 io port: [0xec00-0xec07]
>pci 0000:04:02.1: supports D1 D2
>pci 0000:04:03.0: reg 10 32bit mmio: [0xfebfe000-0xfebfefff]
>pci 0000:04:03.0: supports D1 D2
>pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:04:03.0: PME# disabled
>pci 0000:00:1e.0: transparent bridge
>pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
>pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
>pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 16 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>system 00:06: ioport range 0x290-0x29f has been reserved
>system 00:07: ioport range 0x4d0-0x4d1 has been reserved
>system 00:07: ioport range 0x800-0x87f has been reserved
>system 00:07: ioport range 0x500-0x57f could not be reserved
>system 00:07: iomem range 0xfed08000-0xfed08fff has been reserved
>system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
>system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved
>system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
>system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0f: iomem range 0x0-0x9ffff could not be reserved
>system 00:0f: iomem range 0xc0000-0xcffff has been reserved
>system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0f: iomem range 0x100000-0xcfffffff could not be reserved
>pci 0000:04:01.0: BAR 6: address space collision on of device [0xfebe0000-0xfebeffff]
>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:01.0:   IO window: 0xc000-0xcfff
>pci 0000:00:01.0:   MEM window: 0xfe900000-0xfe9fffff
>pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
>pci 0000:00:1c.0:   MEM window: 0xf0000000-0xf03fffff
>pci 0000:00:1c.0:   PREFETCH window: 0x000000fde00000-0x000000fdefffff
>pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.5:   IO window: 0xd000-0xdfff
>pci 0000:00:1c.5:   MEM window: 0xfea00000-0xfeafffff
>pci 0000:00:1c.5:   PREFETCH window: 0x000000f0400000-0x000000f05fffff
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:1e.0:   IO window: 0xe000-0xefff
>pci 0000:00:1e.0:   MEM window: 0xfeb00000-0xfebfffff
>pci 0000:00:1e.0:   PREFETCH window: 0x000000fdf00000-0x000000fdffffff
>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:1c.0: enabling device (0106 -> 0107)
>pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.5: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
>pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
>pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfe9fffff]
>pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
>pci_bus 0000:03: resource 0 io:  [0x1000-0x1fff]
>pci_bus 0000:03: resource 1 mem: [0xf0000000-0xf03fffff]
>pci_bus 0000:03: resource 2 pref mem [0xfde00000-0xfdefffff]
>pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
>pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]
>pci_bus 0000:02: resource 2 pref mem [0xf0400000-0xf05fffff]
>pci_bus 0000:04: resource 0 io:  [0xe000-0xefff]
>pci_bus 0000:04: resource 1 mem: [0xfeb00000-0xfebfffff]
>pci_bus 0000:04: resource 2 pref mem [0xfdf00000-0xfdffffff]
>pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
>pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:01:00.0: Boot video device
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 5099k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1260445749.229:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 7915
>alg: No test for stdrng (krng)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:01.0: setting latency timer to 64
>pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
>pcieport 0000:00:1c.0: setting latency timer to 64
>pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
>pcieport 0000:00:1c.5: setting latency timer to 64
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:01:00.0: setting latency timer to 64
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xFE9E0000
>[drm] register mmio size: 65536
>ATOM BIOS: 9442.11.10.0.2.AS01
>[drm] Clocks initialized !
>mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 256bits DDR
>[TTM] Zone  kernel: Available graphics memory: 2026264 kiB.
>[drm] radeon: 256M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>radeon 0000:01:00.0: irq 27 for MSI/MSI-X
>[drm] radeon: using MSI.
>[drm] radeon: irq initialized.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] Loading RV770 Microcode
>platform radeon_cp.0: firmware: using built-in firmware radeon/RV770_pfp.bin
>platform radeon_cp.0: firmware: using built-in firmware radeon/RV770_me.bin
>platform radeon_cp.0: firmware: using built-in firmware radeon/R700_rlc.bin
>[drm] ring test succeeded in 1 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   DVI-I
>[drm]   HPD1
>[drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_UNIPHY
>[drm]     CRT2: INTERNAL_KLDSCP_DAC2
>[drm] Connector 1:
>[drm]   DIN
>[drm]   Encoders:
>[drm]     TV1: INTERNAL_KLDSCP_DAC2
>[drm] Connector 2:
>[drm]   DVI-I
>[drm]   HPD2
>[drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm]     DFP2: INTERNAL_KLDSCP_LVTMA
>[drm] fb mappable at 0xD0141000
>[drm] vram apper at 0xD0000000
>[drm] size 9216000
>[drm] fb depth is 24
>[drm]    pitch is 7680
>executing set pll
>executing set crtc timing
>[drm] TV-11: set mode 1280x1024 2d
>executing set pll
>executing set crtc timing
>[drm] TMDS-15: set mode 1920x1200 2e
>Console: switching to colour frame buffer device 160x64
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>brd: module loaded
>ata_piix 0000:00:1f.2: version 2.13
>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
>ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
>ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
>ata_piix 0000:00:1f.5: setting latency timer to 64
>scsi2 : ata_piix
>scsi3 : ata_piix
>ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
>ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
>ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>ATL1E 0000:02:00.0: setting latency timer to 64
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>console [netcon0] enabled
>netconsole: network logging started
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>Driver 'rtc_cmos' needs updating - please use bus_type methods
>rtc_cmos 00:03: RTC can wake from S4
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>ctnetlink v0.93: registering with nfnetlink.
>xt_time: kernel timezone is -0000
>IPv4 over IPv4 tunneling driver
>GRE over IPv4 tunneling driver
>ip_tables: (C) 2000-2006 Netfilter Core Team
>arp_tables: (C) 2002 David S. Miller
>TCP bic registered
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>tunl0: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>sit0: Disabled Privacy Extensions
>ip6tnl0: Disabled Privacy Extensions
>NET: Registered protocol family 17
>Bridge firewalling registered
>registered taskstats version 1
>rtc_cmos 00:03: setting system clock to 2009-12-10 11:49:10 UTC (1260445750)
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
>ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.01: SATA link down (SStatus 0 SControl 300)
>ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.01: SATA link down (SStatus 0 SControl 300)
>ata2.01: link offline, clearing class 3 to NONE
>ata1.00: ATA-8: ST3750330AS, SD15, max UDMA/133
>ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: ATAPI: PIONEER DVD-RW  DVR-215, 1.19, max UDMA/66
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST3750330AS      SD15 PQ: 0 ANSI: 5
>ata2.00: configured for UDMA/66
>sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 <
>scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-215  1.19 PQ: 0 ANSI: 5
> sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>Freeing unused kernel memory: 460k freed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1a.7: setting latency timer to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.7: debug port 1
>firewire_ohci 0000:04:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8ffc00
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8ff800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>sr0: scsi3-mmc drive: 12x/12x writer dvd-ram cd/rw xa/form2 cdda tray
>hub 2-0:1.0: 6 ports detected
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 1:0:0:0: Attached scsi generic sg1 type 5
>firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.0
>via-rhine 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>eth0: VIA Rhine II at 0xfebffc00, 00:05:5d:01:96:2b, IRQ 17.
>eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 45e1.
>udev: renamed network interface eth0 to eth2
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: setting latency timer to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1a.1: setting latency timer to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1a.2: setting latency timer to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 2 ports detected
>usb 1-3: new high speed USB device using ehci_hcd and address 3
>usb 1-3: configuration #1 chosen from 1 choice
>firewire_core: created device fw0: GUID 001e8c0001478d1d, S400
>usb 2-2: new high speed USB device using ehci_hcd and address 2
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
>EXT3-fs: mounted filesystem with writeback data mode.
>kjournald starting.  Commit interval 5 seconds
>usb 2-2: configuration #1 chosen from 1 choice
>hub 2-2:1.0: USB hub found
>hub 2-2:1.0: 2 ports detected
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>usb 8-2: new full speed USB device using uhci_hcd and address 2
>udev: starting version 146
>usb 8-2: configuration #1 chosen from 1 choice
>usb 2-2.1: new high speed USB device using ehci_hcd and address 4
>input: PC Speaker as /devices/platform/pcspkr/input/input2
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>usb 2-2.1: configuration #1 chosen from 1 choice
>hub 2-2.1:1.0: USB hub found
>hub 2-2.1:1.0: 4 ports detected
>gameport: EMU10K1 is pci0000:04:02.1/gameport0, io 0xec00, speed 1050kHz
>Linux video capture interface: v2.00
>usb 2-2.1.1: new high speed USB device using ehci_hcd and address 5
>usb 2-2.1.1: configuration #1 chosen from 1 choice
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>bttv: driver version 0.9.18 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>bttv 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>bttv0: Bt878 (rev 17) at 0000:04:00.0, irq: 16, latency: 64, mmio: 0xfdffe000
>bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001
>bttv0: using: Twinhan DST + clones [card=113,autodetected]
>IRQ 16/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
>bttv0: gpio: en=00000000, out=00000000 in=00f500ff [init]
>bttv0: tuner absent
>bttv0: add subdevice "dvb0"
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>bt878: AUDIO driver version 0.0.0 loaded
>bt878: Bt878 AUDIO function found (0).
>bt878 0000:04:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions.
>bt878(0): Bt878 (rev 17) at 04:00.1, irq: 16, latency: 64, memory: 0xfdfff000
>IRQ 16/bt878: IRQF_DISABLED is not guaranteed on shared IRQs
>DVB: registering new adapter (bttv0)
>EMU10K1_Audigy 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3
>HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>HDA Intel 0000:01:00.1: setting latency timer to 64
>dst(0) dst_get_device_id: Recognise [DTTDIG]
>DST type flags : 0x10 firmware version = 2
>dst(0) dst_get_mac: MAC Address=[00:08:ca:10:13:22]
>DVB: registering adapter 0 frontend 3040 (DST DVB-T)...
>Adding 7815580k swap on /dev/sda1.  Priority:-1 extents:1 across:7815580k 
>EXT3 FS on sda5, internal journal
>loop: module loaded
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access     Generic  Flash HS-CF      5.39 PQ: 0 ANSI: 0
>scsi 4:0:0:1: Direct-Access     Generic  Flash HS-COMBO   5.39 PQ: 0 ANSI: 0
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>sd 4:0:0:1: Attached scsi generic sg3 type 0
>sd 4:0:0:0: [sdb] Attached SCSI removable disk
>sd 4:0:0:1: [sdc] Attached SCSI removable disk
>fuse init (API version 7.13)
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>REISERFS (device dm-1): found reiserfs format "3.6" with standard journal
>REISERFS (device dm-1): using ordered data mode
>REISERFS (device dm-1): journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device dm-1): checking transaction log (dm-1)
>REISERFS (device dm-1): Using r5 hash to sort names
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with writeback data mode.
>REISERFS (device dm-2): found reiserfs format "3.6" with standard journal
>REISERFS (device dm-2): using ordered data mode
>REISERFS (device dm-2): journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device dm-2): checking transaction log (dm-2)
>REISERFS (device dm-2): Using r5 hash to sort names
>REISERFS (device dm-5): found reiserfs format "3.6" with standard journal
>REISERFS (device dm-5): using ordered data mode
>REISERFS (device dm-5): journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>REISERFS (device dm-5): checking transaction log (dm-5)
>REISERFS (device dm-5): Using r5 hash to sort names
>NTFS driver 2.1.29 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>NTFS-fs warning (device sda3): load_system_files(): Unsupported volume flags 0x4000 encountered.
>NTFS-fs error (device sda3): load_system_files(): Volume has unsupported flags set.  Mounting read-only.  Run chkdsk and mount in Windows.
>device eth1 entered promiscuous mode
>ATL1E 0000:02:00.0: irq 28 for MSI/MSI-X
>ATL1E 0000:02:00.0: ATL1E: eth1 NIC Link is Up<1000 Mbps Full Duplex>
>device tap0 entered promiscuous mode
>br0: port 2(tap0) entering learning state
>br0: port 1(eth1) entering learning state
>br0: port 2(tap0) entering forwarding state
>br0: port 1(eth1) entering forwarding state
>eth2: link up, 100Mbps, full-duplex, lpa 0x45E1
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>sixxs: Disabled Privacy Extensions
>Bluetooth: L2CAP ver 2.14
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>executing set pll
>executing set crtc timing
>[drm] TV-11: set mode 1280x1024 2d
>executing set pll
>executing set crtc timing
>[drm] TMDS-15: set mode 1920x1200 2e
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>[drm:radeon_cs_ioctl] *ERROR* Failed to parse relocation !
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)
>radeon 0000:01:00.0: object_init failed for (15974400, 0x00060004)
>[drm:radeon_gem_object_create] *ERROR* Failed to allocate GEM object (15974400, 4, 4096)

Actions: View

Attachments on bug 25559: 31927 | 31933 | 31934 | 31939 | 31940 | 31975 | 32032

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.