Attachment 32797 Details for Bug 26199 – dmesg with dri off and booting to X

dmesg with dri off and booting to X

kernel_oops (text/plain), 33.62 KB, created by Peter Hercek on 2010-01-24 12:17:00 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Peter Hercek

Created: 2010-01-24 12:17:00 UTC

Size: 33.62 KB

patch

obsolete

>Linux version 2.6.33-rc5-rc (root@metod) (gcc version 4.4.2 20091208 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Jan 24 19:26:42 CET 2010
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bfff0000 (usable)
> BIOS-e820: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
> BIOS-e820: 00000000bfff3000 - 00000000c0000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>DMI 2.2 present.
>Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>last_pfn = 0xbfff0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-FFFFF uncachable
>MTRR variable ranges enabled:
>  0 base 0000000000 mask FF80000000 write-back
>  1 base 0080000000 mask FFC0000000 write-back
>  2 base 00F0000000 mask FFF8000000 write-combining
>  3 disabled
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>Scanning 0 areas for low memory corruption
>modified physical RAM map:
> modified: 0000000000000000 - 0000000000010000 (reserved)
> modified: 0000000000010000 - 000000000009f000 (usable)
> modified: 000000000009f000 - 00000000000a0000 (reserved)
> modified: 00000000000f0000 - 0000000000100000 (reserved)
> modified: 0000000000100000 - 00000000bfff0000 (usable)
> modified: 00000000bfff0000 - 00000000bfff3000 (ACPI NVS)
> modified: 00000000bfff3000 - 00000000c0000000 (ACPI data)
> modified: 00000000fec00000 - 0000000100000000 (reserved)
>initial memory mapped : 0 - 01800000
>found SMP MP-table at [c00f5040] f5040
>init_memory_mapping: 0000000000000000-00000000377fe000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 0037400000 page 2M
> 0037400000 - 00377fe000 page 4k
>kernel direct mapping tables up to 377fe000 @ 15000-1a000
>RAMDISK: 7fe3b000 - 7ffef23c
>Allocated new RAMDISK: 00100000 - 002b423c
>Move RAMDISK from 000000007fe3b000 - 000000007ffef23b to 00100000 - 002b423b
>ACPI: RSDP 000f8f30 00014 (v00 Nvidia)
>ACPI: RSDT bfff3040 00030 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
>ACPI: FACP bfff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
>ACPI: DSDT bfff3180 048C1 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
>ACPI: FACS bfff0000 00040
>ACPI: SSDT bfff7b80 0020C (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
>ACPI: APIC bfff7ac0 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
>ACPI: Local APIC address 0xfee00000
>2183MB HIGHMEM available.
>887MB LOWMEM available.
>  mapped low ram: 0 - 377fe000
>  low ram: 0 - 377fe000
>  node 0 low ram: 00000000 - 377fe000
>  node 0 bootmap 00016000 - 0001cf00
>(14 early reservations) ==> bootmem [0000000000 - 00377fe000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0001000000 - 0001535b84]    TEXT DATA BSS ==> [0001000000 - 0001535b84]
>  #3 [0001536000 - 000153c06a]              BRK ==> [0001536000 - 000153c06a]
>  #4 [00000f5050 - 0000100000]    BIOS reserved ==> [00000f5050 - 0000100000]
>  #5 [00000f5040 - 00000f5050]     MP-table mpf ==> [00000f5040 - 00000f5050]
>  #6 [000009f000 - 00000f0c00]    BIOS reserved ==> [000009f000 - 00000f0c00]
>  #7 [00000f0d4c - 00000f5040]    BIOS reserved ==> [00000f0d4c - 00000f5040]
>  #8 [00000f0c00 - 00000f0d4c]     MP-table mpc ==> [00000f0c00 - 00000f0d4c]
>  #9 [0000010000 - 0000011000]       TRAMPOLINE ==> [0000010000 - 0000011000]
>  #10 [0000011000 - 0000015000]      ACPI WAKEUP ==> [0000011000 - 0000015000]
>  #11 [0000015000 - 0000016000]          PGTABLE ==> [0000015000 - 0000016000]
>  #12 [0000100000 - 00002b423c]      NEW RAMDISK ==> [0000100000 - 00002b423c]
>  #13 [0000016000 - 000001d000]          BOOTMAP ==> [0000016000 - 000001d000]
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x000377fe
>  HighMem  0x000377fe -> 0x000bfff0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x000bfff0
>On node 0 totalpages: 786303
>free_area_init_node: node 0, pgdat c13e1440, node_mem_map c153e200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 1744 pages used for memmap
>  Normal zone: 221486 pages, LIFO batch:31
>  HighMem zone: 4368 pages used for memmap
>  HighMem zone: 554722 pages, LIFO batch:31
>Using APIC driver default
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
>PERCPU: Embedded 14 pages/cpu @c3000000 s34904 r0 d22440 u2097152
>pcpu-alloc: s34904 r0 d22440 u2097152 alloc=1*4194304
>pcpu-alloc: [0] 0 1 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 780159
>Kernel command line: root=/dev/disk/by-uuid/c3c979bd-fbe6-438f-b702-763dd74b8098 ro
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>Initializing HighMem for node 0 (000377fe:000bfff0)
>Memory: 3111576k/3145664k available (2813k kernel code, 32688k reserved, 1193k data, 412k init, 2236360k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff1e000 - 0xfffff000   ( 900 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>      .init : 0xc13ea000 - 0xc1451000   ( 412 kB)
>      .data : 0xc12bf5b2 - 0xc13e9da8   (1193 kB)
>      .text : 0xc1000000 - 0xc12bf5b2   (2813 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:512
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Fast TSC calibration using PIT
>Detected 2411.142 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4824.21 BogoMIPS (lpj=8037140)
>Security Framework initialized
>Mount-cache hash table entries: 512
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 5 MCE banks
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20091214
>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ stepping 02
>Booting Node   0, Processors  #1 Ok.
>Initializing CPU#1
>Brought up 2 CPUs
>Total of 2 processors activated (9626.03 BogoMIPS).
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb840, last bus=2
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Power Resource [ISAV] (on)
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff] (ignored)
>pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
>pci 0000:00:01.1: reg 10: [io  0xfc00-0xfc1f]
>pci 0000:00:01.1: reg 20: [io  0x4c00-0x4c3f]
>pci 0000:00:01.1: reg 24: [io  0x4c40-0x4c7f]
>pci 0000:00:01.1: PME# supported from D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
>pci 0000:00:02.0: supports D1 D2
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02efff]
>pci 0000:00:02.1: supports D1 D2
>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.1: PME# disabled
>pci 0000:00:02.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
>pci 0000:00:02.2: supports D1 D2
>pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.2: PME# disabled
>pci 0000:00:05.0: reg 10: [mem 0xfe02c000-0xfe02cfff]
>pci 0000:00:05.0: reg 14: [io  0xf000-0xf007]
>pci 0000:00:05.0: supports D1 D2
>pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:05.0: PME# disabled
>pci 0000:00:08.0: reg 20: [io  0xe400-0xe40f]
>pci 0000:00:09.0: reg 10: [io  0x09e0-0x09e7]
>pci 0000:00:09.0: reg 14: [io  0x0be0-0x0be3]
>pci 0000:00:09.0: reg 18: [io  0x0960-0x0967]
>pci 0000:00:09.0: reg 1c: [io  0x0b60-0x0b63]
>pci 0000:00:09.0: reg 20: [io  0xd000-0xd00f]
>pci 0000:00:09.0: reg 24: [io  0xcc00-0xcc7f]
>pci 0000:00:0a.0: reg 10: [io  0x09f0-0x09f7]
>pci 0000:00:0a.0: reg 14: [io  0x0bf0-0x0bf3]
>pci 0000:00:0a.0: reg 18: [io  0x0970-0x0977]
>pci 0000:00:0a.0: reg 1c: [io  0x0b70-0x0b73]
>pci 0000:00:0a.0: reg 20: [io  0xb800-0xb80f]
>pci 0000:00:0a.0: reg 24: [io  0xb400-0xb47f]
>pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
>pci 0000:01:00.0: reg 14: [io  0xac00-0xacff]
>pci 0000:01:00.0: reg 18: [mem 0xfdff0000-0xfdffffff]
>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:00:0b.0: PCI bridge to [bus 01-01]
>pci 0000:00:0b.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:0b.0:   bridge window [mem 0xfdf00000-0xfdffffff]
>pci 0000:00:0b.0:   bridge window [mem 0xe0000000-0xefffffff pref]
>pci 0000:02:07.0: reg 10: [mem 0xfddff000-0xfddfffff pref]
>pci 0000:02:07.1: reg 10: [mem 0xfddfe000-0xfddfefff pref]
>pci 0000:02:08.0: reg 10: [io  0x9c00-0x9cff]
>pci 0000:02:08.0: supports D1 D2
>pci 0000:02:0c.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
>pci 0000:02:0c.0: reg 14: [io  0x9800-0x987f]
>pci 0000:02:0c.0: supports D2
>pci 0000:02:0c.0: PME# supported from D2 D3hot D3cold
>pci 0000:02:0c.0: PME# disabled
>pci 0000:02:0d.0: reg 10: [io  0x9400-0x94ff]
>pci 0000:02:0d.0: reg 14: [mem 0xfdefe000-0xfdefe0ff]
>pci 0000:02:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:02:0d.0: supports D1 D2
>pci 0000:02:0d.0: PME# supported from D1 D2 D3hot D3cold
>pci 0000:02:0d.0: PME# disabled
>pci 0000:00:0e.0: PCI bridge to [bus 02-02]
>pci 0000:00:0e.0:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:0e.0:   bridge window [mem 0xfde00000-0xfdefffff]
>pci 0000:00:0e.0:   bridge window [mem 0xfdd00000-0xfddfffff pref]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
>ACPI: PCI Interrupt Link [APC5] (IRQs *16)
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Switching to clocksource jiffies
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 10 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:00: [io  0x4000-0x407f] has been reserved
>system 00:00: [io  0x4080-0x40ff] has been reserved
>system 00:00: [io  0x4400-0x447f] has been reserved
>system 00:00: [io  0x4480-0x44ff] has been reserved
>system 00:00: [io  0x4800-0x487f] has been reserved
>system 00:00: [io  0x4880-0x48ff] has been reserved
>system 00:01: [mem 0x000d0000-0x000d3fff] has been reserved
>system 00:01: [mem 0x000f0000-0x000f7fff] could not be reserved
>system 00:01: [mem 0x000f8000-0x000fbfff] could not be reserved
>system 00:01: [mem 0x000fc000-0x000fffff] could not be reserved
>system 00:01: [mem 0xbfff0000-0xbfffffff] could not be reserved
>system 00:01: [mem 0xffff0000-0xffffffff] has been reserved
>system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:01: [mem 0x00100000-0xbffeffff] could not be reserved
>system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
>system 00:01: [mem 0xfefff000-0xfeffffff] has been reserved
>system 00:01: [mem 0xfff80000-0xfff80fff] has been reserved
>system 00:01: [mem 0xfff90000-0xfffbffff] has been reserved
>system 00:01: [mem 0xfffed000-0xfffeffff] has been reserved
>system 00:03: [io  0x0b78-0x0b7b] has been reserved
>system 00:03: [io  0x0f78-0x0f7b] has been reserved
>system 00:03: [io  0x0a78-0x0a7b] has been reserved
>system 00:03: [io  0x0e78-0x0e7b] has been reserved
>system 00:03: [io  0x0bbc-0x0bbf] has been reserved
>system 00:03: [io  0x0fbc-0x0fbf] has been reserved
>system 00:03: [io  0x04d0-0x04d1] has been reserved
>Switching to clocksource acpi_pm
>pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
>pci 0000:00:0b.0: PCI bridge to [bus 01-01]
>pci 0000:00:0b.0:   bridge window [io  0xa000-0xafff]
>pci 0000:00:0b.0:   bridge window [mem 0xfdf00000-0xfdffffff]
>pci 0000:00:0b.0:   bridge window [mem 0xe0000000-0xefffffff pref]
>pci 0000:02:0d.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
>pci 0000:00:0e.0: PCI bridge to [bus 02-02]
>pci 0000:00:0e.0:   bridge window [io  0x9000-0x9fff]
>pci 0000:00:0e.0:   bridge window [mem 0xfde00000-0xfdefffff]
>pci 0000:00:0e.0:   bridge window [mem 0xfdd00000-0xfddfffff pref]
>pci 0000:00:0e.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
>pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
>pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref]
>pci_bus 0000:02: resource 0 [io  0x9000-0x9fff]
>pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
>pci_bus 0000:02: resource 2 [mem 0xfdd00000-0xfddfffff pref]
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>pci 0000:01:00.0: Boot video device
>PCI: CLS 32 bytes, default 64
>Unpacking initramfs...
>Freeing initrd memory: 1744k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>Scanning for low memory corruption every 60 seconds
>audit: initializing netlink socket (disabled)
>type=2000 audit(1264363227.390:1): initialized
>highmem bounce pool size: 64 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1714
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>PM: Resume from disk failed.
>registered taskstats version 1
>Initalizing network drop monitor service
>Freeing unused kernel memory: 412k freed
>SCSI subsystem initialized
>libata version 3.00 loaded.
>pata_amd 0000:00:08.0: version 0.4.1
>pata_amd 0000:00:08.0: power state changed by ACPI to D0
>pata_amd 0000:00:08.0: setting latency timer to 64
>scsi0 : pata_amd
>scsi1 : pata_amd
>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15
>ata1.00: ATAPI: PIONEER DVD-RW  DVR-108, 1.20, max UDMA/66
>ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:120:0x1b)
>ata1.00: configured for UDMA/66
>scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-108  1.20 PQ: 0 ANSI: 5
>ata2: port disabled. ignoring.
>sata_nv 0000:00:09.0: version 3.5
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
>sata_nv 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, high) -> IRQ 23
>sata_nv 0000:00:09.0: setting latency timer to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xd000 irq 23
>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xd008 irq 23
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
>sata_nv 0000:00:0a.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, high) -> IRQ 22
>sata_nv 0000:00:0a.0: setting latency timer to 64
>scsi4 : sata_nv
>scsi5 : sata_nv
>ata5: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xb800 irq 22
>ata6: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xb808 irq 22
>ata5: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-7: WDC WD1500ADFD-00NLR1, 20.07P20, max UDMA/133
>ata3.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD1500ADFD-0 20.0 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sda] 293046768 512-byte logical blocks: (150 GB/139 GiB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 2:0:0:0: [sda] Attached SCSI disk
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATA-7: WDC WD7500AYYS-01RCA0, 30.04G30, max UDMA/133
>ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata4.00: configured for UDMA/133
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD7500AYYS-0 30.0 PQ: 0 ANSI: 5
>sd 3:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4
>sd 3:0:0:0: [sdb] Attached SCSI disk
>ata6: SATA link down (SStatus 0 SControl 300)
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
>ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 21 (level, high) -> IRQ 21
>ehci_hcd 0000:00:02.2: setting latency timer to 64
>ehci_hcd 0000:00:02.2: EHCI Host Controller
>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.2: debug port 1
>ehci_hcd 0000:00:02.2: cache line size of 32 is not supported
>ehci_hcd 0000:00:02.2: irq 21, io mem 0xfe02d000
>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, high) -> IRQ 20
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ACPI: PCI Interrupt Link [APCG] enabled at IRQ 23
>ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 23 (level, high) -> IRQ 23
>ohci_hcd 0000:00:02.1: setting latency timer to 64
>ohci_hcd 0000:00:02.1: OHCI Host Controller
>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>usb 1-3: new high speed USB device using ehci_hcd and address 2
>EXT3-fs (sda2): mounted filesystem with writeback data mode
>kjournald starting.  Commit interval 5 seconds
>usb 2-3: new low speed USB device using ohci_hcd and address 2
>rtc_cmos 00:05: RTC can wake from S4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 242 bytes nvram
>usb 3-2: new full speed USB device using ohci_hcd and address 2
>udev: starting version 146
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
>r8169 0000:02:0d.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
>r8169 0000:02:0d.0: no PCI Express capability
>eth0: RTL8110s at 0xf82ee000, 00:11:09:88:cf:25, XID 04000000 IRQ 16
>usb 3-3: new full speed USB device using ohci_hcd and address 3
>input: PC Speaker as /devices/platform/pcspkr/input/input1
>sr 0:0:0:0: Attached scsi generic sg0 type 5
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>lp: driver loaded but no devices found
>Initializing USB Mass Storage driver...
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4800+ processors (2 cpu cores) (version 2.20.00)
>powernow-k8:    0 : fid 0x10 (2400 MHz), vid 0x8
>powernow-k8:    1 : fid 0xe (2200 MHz), vid 0xa
>powernow-k8:    2 : fid 0xc (2000 MHz), vid 0xc
>powernow-k8:    3 : fid 0xa (1800 MHz), vid 0xe
>powernow-k8:    4 : fid 0x2 (1000 MHz), vid 0x12
>scsi6 : usb-storage 1-3:1.0
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
>forcedeth 0000:00:05.0: PCI INT A -> Link[APCH] -> GSI 22 (level, high) -> IRQ 22
>forcedeth 0000:00:05.0: setting latency timer to 64
>nv_probe: set workaround bit for reversed mac addr
>forcedeth 0000:00:05.0: Invalid Mac address detected: bf:ff:ff:ef:ff:ff
>forcedeth 0000:00:05.0: Please complain to your hardware vendor. Switching to a random MAC.
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button [PWRF]
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4
>generic-usb 0003:045E:0039.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-3/input0
>Linux agpgart interface v0.103
>hub 3-3:1.0: USB hub found
>hub 3-3:1.0: 4 ports detected
>generic-usb 0003:18EA:0004.0002: hiddev0,hidraw1: USB HID v1.01 Device [Matrox TripleHead2Go] on usb-0000:00:02.1-2/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>ppdev: user-space parallel port driver
>w83627hf: Found W83627THF chip at 0x290
>w83627hf w83627hf.656: Reading VID from GPIO5
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>[drm] Initialized drm 1.1.0 20060810
>lp0: using parport0 (interrupt-driven).
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>firewire_ohci 0000:02:0c.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
>firewire_ohci: Added fw-ohci device 0000:02:0c.0, OHCI version 1.0
>usb 3-3.2: new full speed USB device using ohci_hcd and address 4
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
>radeon 0000:01:00.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xFDFF0000
>[drm] register mmio size: 65536
>ATOM BIOS: 113
>[drm] Clocks initialized !
>BUG: unable to handle kernel NULL pointer dereference at 00000040
>IP: [<f87aafe2>] radeon_agp_init+0x12/0x2d0 [radeon]
>*pde = 00000000 
>Oops: 0000 [#1] PREEMPT SMP 
>last sysfs file: /sys/devices/pci0000:00/0000:00:09.0/host2/target2:0:0/2:0:0:0/scsi_level
>Modules linked in: videobuf_core snd_seq_device radeon(+) btcx_risc ttm firewire_ohci tveeprom snd drm_kms_helper firewire_core ir_core soundcore drm i2c_algo_bit crc_itu_t w83627hf parport_pc hwmon_vid i2c_nforce2(+) amd64_agp(+) agpgart i2c_core k8temp(+) button thermal ppdev forcedeth(+) powernow_k8 usbhid shpchp freq_table pci_hotplug hid psmouse usb_storage serio_raw processor evdev sg lp pcspkr parport r8169 mii rtc_cmos rtc_core rtc_lib ext3 jbd mbcache ohci_hcd ehci_hcd usbcore sr_mod sd_mod cdrom sata_nv ata_generic pata_amd libata scsi_mod
>
>Pid: 1104, comm: modprobe Not tainted 2.6.33-rc5-rc #1 MS-7025/ 
>EIP: 0060:[<f87aafe2>] EFLAGS: 00010282 CPU: 0
>EIP is at radeon_agp_init+0x12/0x2d0 [radeon]
>EAX: f6a52000 EBX: f655e000 ECX: 20000000 EDX: 00000000
>ESI: 00080000 EDI: 0000001e EBP: f70e1000 ESP: f64e3d70
> DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
>Process modprobe (pid: 1104, ti=f64e2000 task=f6687240 task.ti=f64e2000)
>Stack:
> f66d4120 00000002 f64e3d92 000080d0 c10e0320 00000036 00000000 00000202
><0> 00004000 f87c67fb f66d4120 f65cacd0 00000020 deba4007 f880c2b4 00000001
><0> f655e000 f655e000 00080000 0000001e f70e1000 f87e32e4 00000000 f655e64c
>Call Trace:
> [<c10e0320>] ? __kmalloc+0x100/0x1c0
> [<f87c67fb>] ? radeon_read_bios+0x6b/0x80 [radeon]
> [<f87e32e4>] ? r600_mc_init+0x1c4/0x470 [radeon]
> [<f87b4760>] ? radeon_fence_driver_init+0xd0/0x150 [radeon]
> [<f87e40d5>] ? r600_init+0x115/0x2b0 [radeon]
> [<f87a778f>] ? radeon_device_init+0x21f/0x2e0 [radeon]
> [<f87a6b60>] ? radeon_vga_set_decode+0x0/0x20 [radeon]
> [<f87a83fe>] ? radeon_driver_load_kms+0x7e/0x1b0 [radeon]
> [<f85ed597>] ? drm_get_dev+0x2b7/0x4e0 [drm]
> [<c1189850>] ? pci_match_device+0xa0/0xc0
> [<c11896db>] ? local_pci_probe+0xb/0x10
> [<c118a4b1>] ? pci_device_probe+0x61/0x80
> [<c11fe46b>] ? driver_probe_device+0x7b/0x170
> [<c1189850>] ? pci_match_device+0xa0/0xc0
> [<c11fe5d9>] ? __driver_attach+0x79/0x80
> [<c11fe560>] ? __driver_attach+0x0/0x80
> [<c11fdcd2>] ? bus_for_each_dev+0x52/0x80
> [<c11fe306>] ? driver_attach+0x16/0x20
> [<c11fe560>] ? __driver_attach+0x0/0x80
> [<c11fd5c6>] ? bus_add_driver+0xc6/0x2b0
> [<c118a3f0>] ? pci_device_remove+0x0/0x40
> [<c11fe873>] ? driver_register+0x63/0x120
> [<f85e846d>] ? drm_init+0x2d/0xf0 [drm]
> [<f881b000>] ? radeon_init+0x0/0xb0 [radeon]
> [<c118a6dd>] ? __pci_register_driver+0x3d/0xb0
> [<c100112f>] ? do_one_initcall+0x2f/0x190
> [<c10761b4>] ? sys_init_module+0xb4/0x220
> [<c100381f>] ? sysenter_do_call+0x12/0x28
>Code: 00 00 85 d2 74 07 8b 52 40 85 d2 75 04 f3 c3 66 90 e9 43 35 e4 ff 8d 76 00 55 57 56 53 89 c3 83 ec 44 8b 40 04 8b 90 38 02 00 00 <8b> 4a 40 85 c9 75 12 e8 a2 34 e4 ff 85 c0 89 c7 0f 85 42 02 00 
>EIP: [<f87aafe2>] radeon_agp_init+0x12/0x2d0 [radeon] SS:ESP 0068:f64e3d70
>CR2: 0000000000000040
>---[ end trace 9862a09ac2d1c90e ]---
>input: HID 05f3:0007 as /devices/pci0000:00/0000:00:02.1/usb3/3-3/3-3.2/3-3.2:1.0/input/input5
>generic-usb 0003:05F3:0007.0003: input,hidraw2: USB HID v1.00 Keyboard [HID 05f3:0007] on usb-0000:00:02.1-3.2/input0
>input: HID 05f3:0007 as /devices/pci0000:00/0000:00:02.1/usb3/3-3/3-3.2/3-3.2:1.1/input/input6
>generic-usb 0003:05F3:0007.0004: input,hidraw3: USB HID v1.00 Device [HID 05f3:0007] on usb-0000:00:02.1-3.2/input1
>Linux video capture interface: v2.00
>forcedeth 0000:00:05.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 02:c4:3c:8f:32:d0
>forcedeth 0000:00:05.0: csum timirq gbit lnktim desc-v2
>agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
>agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
>agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
>agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
>i2c i2c-0: nForce2 SMBus adapter at 0x4c00
>i2c i2c-1: nForce2 SMBus adapter at 0x4c40
>bttv: driver version 0.9.18 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>bttv 0000:02:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
>bttv0: Bt879 (rev 2) at 0000:02:07.0, irq: 17, latency: 32, mmio: 0xfddff000
>bttv0: detected: FlyVideo 98 (LR50)/ Chronos Video Shuttle II [card=35], PCI subsystem ID is 1851:1850
>bttv0: using: Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II [card=35,autodetected]
>IRQ 17/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
>bttv0: gpio: en=00000000, out=00000000 in=0094ff00 [init]
>bttv0: FlyVideo Radio=no  RemoteControl=yes Tuner=5 gpio=0x94ff00
>bttv0: FlyVideo  LR90=no  tda9821/tda9820=no  capture_only=no 
>bttv0: tuner type=5
>fuse init (API version 7.13)
>loop: module loaded
>bttv0: audio absent, no audio device found!
>tuner 2-0061: chip found @ 0xc2 (bt879 #0 [sw])
>tuner-simple 2-0061: creating new instance
>tuner-simple 2-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>bttv0: registered device video0
>bttv0: registered device vbi0
>bttv0: PLL: 28636363 => 35468950 .. ok
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>AV200 0000:02:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
>firewire_core: created device fw0: GUID 0010dc00006b9ce3, S400
>EXT3-fs (sda2): using internal journal
>Adding 6016300k swap on /dev/sda1.  Priority:-1 extents:1 across:6016300k 
>scsi 6:0:0:0: Direct-Access     Generic  USB Storage-SMC  I03A PQ: 0 ANSI: 0 CCS
>sd 6:0:0:0: Attached scsi generic sg3 type 0
>scsi 6:0:0:1: Direct-Access     Generic  USB Storage-CFC  I03A PQ: 0 ANSI: 0 CCS
>sd 6:0:0:1: Attached scsi generic sg4 type 0
>scsi 6:0:0:2: Direct-Access     Generic  USB Storage-MMC  I03A PQ: 0 ANSI: 0 CCS
>sd 6:0:0:2: Attached scsi generic sg5 type 0
>scsi 6:0:0:3: Direct-Access     Generic  USB Storage-MSC  I03A PQ: 0 ANSI: 0 CCS
>sd 6:0:0:3: Attached scsi generic sg6 type 0
>sd 6:0:0:2: [sde] Attached SCSI removable disk
>sd 6:0:0:0: [sdc] Attached SCSI removable disk
>sd 6:0:0:3: [sdf] Attached SCSI removable disk
>sd 6:0:0:1: [sdd] Attached SCSI removable disk
>eth1: no link during initialization.
>Clocksource tsc unstable (delta = -81926248 ns)
>eth1: link up.

Actions: View

Attachments on bug 26199: 32797 | 32798 | 32812 | 32813

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.