Attachment 33076 Details for Bug 26430 – dmesg

dmesg

dmesg_failed_edid.log (text/plain), 42.92 KB, created by Andrew Randrianasulu on 2010-02-04 10:16:17 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andrew Randrianasulu

Created: 2010-02-04 10:16:17 UTC

Size: 42.92 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.33-rc6-i486 (guest@slax) (gcc version 4.4.3 (GCC) ) #67 SMP Thu Feb 4 18:11:12 GMT 2010
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ce000 - 00000000000d2000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
> BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
> BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
>DMI 2.3 present.
>AMI BIOS detected: BIOS may corrupt low RAM, working around it.
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>last_pfn = 0xfff0 max_arch_pfn = 0x100000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-EFFFF uncachable
>  F0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask FF0000000 write-back
>  1 disabled
>  2 disabled
>  3 disabled
>  4 disabled
>  5 base 0E0000000 mask FFE000000 write-combining
>  6 disabled
>  7 disabled
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>initial memory mapped : 0 - 01800000
>found SMP MP-table at [c00fb920] fb920
>init_memory_mapping: 0000000000000000-000000000fff0000
> 0000000000 - 0000400000 page 4k
> 0000400000 - 000fc00000 page 2M
> 000fc00000 - 000fff0000 page 4k
>kernel direct mapping tables up to fff0000 @ 15000-1a000
>RAMDISK: 00e21000 - 00effc43
>ACPI: RSDP 000fa940 00014 (v00 AMI   )
>ACPI: RSDT 0fff0000 0002C (v01 AMIINT VIA_K7   00000010 MSFT 00000097)
>ACPI: FACP 0fff0030 00081 (v01 AMIINT VIA_K7   00000011 MSFT 00000097)
>ACPI: DSDT 0fff0120 02F53 (v01    VIA   VIA_K7 00001000 MSFT 0100000D)
>ACPI: FACS 0fff8000 00040
>ACPI: APIC 0fff00c0 00054 (v01 AMIINT VIA_K7   00000009 MSFT 00000097)
>ACPI: Local APIC address 0xfee00000
>0MB HIGHMEM available.
>255MB LOWMEM available.
>  mapped low ram: 0 - 0fff0000
>  low ram: 0 - 0fff0000
>  node 0 low ram: 00000000 - 0fff0000
>  node 0 bootmap 00016000 - 00018000
>(14 early reservations) ==> bootmem [0000000000 - 000fff0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
>  #2 [0001000000 - 00014b0c40]    TEXT DATA BSS ==> [0001000000 - 00014b0c40]
>  #3 [0000e21000 - 0000effc43]          RAMDISK ==> [0000e21000 - 0000effc43]
>  #4 [00014b1000 - 00014b7108]              BRK ==> [00014b1000 - 00014b7108]
>  #5 [00000fb930 - 0000100000]    BIOS reserved ==> [00000fb930 - 0000100000]
>  #6 [00000fb920 - 00000fb930]     MP-table mpf ==> [00000fb920 - 00000fb930]
>  #7 [000009fc00 - 00000f66b0]    BIOS reserved ==> [000009fc00 - 00000f66b0]
>  #8 [00000f67e0 - 00000fb920]    BIOS reserved ==> [00000f67e0 - 00000fb920]
>  #9 [00000f66b0 - 00000f67e0]     MP-table mpc ==> [00000f66b0 - 00000f67e0]
>  #10 [0000010000 - 0000011000]       TRAMPOLINE ==> [0000010000 - 0000011000]
>  #11 [0000011000 - 0000015000]      ACPI WAKEUP ==> [0000011000 - 0000015000]
>  #12 [0000015000 - 0000016000]          PGTABLE ==> [0000015000 - 0000016000]
>  #13 [0000016000 - 0000018000]          BOOTMAP ==> [0000016000 - 0000018000]
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  Normal   0x00001000 -> 0x0000fff0
>  HighMem  0x0000fff0 -> 0x0000fff0
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000010 -> 0x0000009f
>    0: 0x00000100 -> 0x0000fff0
>On node 0 totalpages: 65407
>free_area_init_node: node 0, pgdat c13a1280, node_mem_map c14b9200
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3951 pages, LIFO batch:0
>  Normal zone: 480 pages used for memmap
>  Normal zone: 60944 pages, LIFO batch:15
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 24
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
>PM: Registered nosave memory: 00000000000ce000 - 00000000000d2000
>PM: Registered nosave memory: 00000000000d2000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 10000000 (gap: 10000000:eec00000)
>setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
>PERCPU: Embedded 16 pages/cpu @c1800000 s41624 r0 d23912 u4194304
>pcpu-alloc: s41624 r0 d23912 u4194304 alloc=1*4194304
>pcpu-alloc: [0] 0 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64895
>Kernel command line: BOOT_IMAGE=2.6.33-rc6 ro root=1601 nocd nopcmcia max_loop=255 nohotplug vt.default_utf8=0
>PID hash table entries: 1024 (order: 0, 4096 bytes)
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Enabling fast FPU save and restore... done.
>Initializing CPU#0
>allocated 1310080 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Initializing HighMem for node 0 (00000000:00000000)
>Memory: 252072k/262080k available (2268k kernel code, 9360k reserved, 1537k data, 400k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff1e000 - 0xfffff000   ( 900 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xd07f0000 - 0xff7fe000   ( 752 MB)
>    lowmem  : 0xc0000000 - 0xcfff0000   ( 255 MB)
>      .init : 0xc13b8000 - 0xc141c000   ( 400 kB)
>      .data : 0xc12371f4 - 0xc13b79c8   (1537 kB)
>      .text : 0xc1000000 - 0xc12371f4   (2268 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:512
>CPU 0 irqstacks, hard=c1800000 soft=c1801000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Fast TSC calibration using PIT
>Detected 950.033 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 1900.06 BogoMIPS (lpj=3800132)
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys freezer
>mce: CPU supports 4 MCE banks
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 11k freed
>ACPI: Core revision 20091214
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 13931 entries in 28 pages
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Duron(tm) Processor stepping 01
>Brought up 1 CPUs
>Total of 1 processors activated (1900.06 BogoMIPS).
>Time: 21:06:42  Date: 02/04/10
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>ACPI: No dock devices found.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xfebfffff] (ignored)
>pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffdfffff] (ignored)
>pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe1ffffff pref]
>pci 0000:00:01.0: supports D1
>pci 0000:00:05.0: reg 10: [io  0xec00-0xecff]
>pci 0000:00:05.0: reg 14: [mem 0xdfffff00-0xdfffffff]
>pci 0000:00:05.0: reg 30: [mem 0xdffe0000-0xdffeffff pref]
>pci 0000:00:05.0: supports D1 D2
>pci 0000:00:05.0: PME# supported from D1 D2 D3hot
>pci 0000:00:05.0: PME# disabled
>pci 0000:00:06.0: reg 20: [io  0xe400-0xe41f]
>pci 0000:00:06.1: reg 20: [io  0xe800-0xe81f]
>pci 0000:00:06.2: reg 10: [mem 0xdffffe00-0xdffffeff]
>pci 0000:00:06.2: PME# supported from D0 D3hot
>pci 0000:00:06.2: PME# disabled
>pci 0000:00:08.0: reg 10: [mem 0xdffff800-0xdffffbff]
>pci 0000:00:08.0: supports D1 D2
>pci 0000:00:11.1: reg 20: [io  0xfc00-0xfc0f]
>pci 0000:00:11.2: reg 20: [io  0xd800-0xd81f]
>pci 0000:00:11.3: reg 20: [io  0xdc00-0xdc1f]
>pci 0000:00:11.5: reg 10: [io  0xe000-0xe0ff]
>pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
>pci 0000:01:00.0: reg 14: [io  0xc800-0xc8ff]
>pci 0000:01:00.0: reg 18: [mem 0xdfef0000-0xdfefffff]
>pci 0000:01:00.0: reg 30: [mem 0xdfec0000-0xdfedffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: reg 10: [mem 0xc8000000-0xcfffffff pref]
>pci 0000:01:00.1: reg 14: [mem 0xdfee0000-0xdfeeffff]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:01.0:   bridge window [mem 0xdfe00000-0xdfefffff]
>pci 0000:00:01.0:   bridge window [mem 0xbfc00000-0xdfcfffff pref]
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 32 bytes
>Switching to clocksource tsc
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>pci 0000:00:01.0: PCI bridge to [bus 01-01]
>pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:01.0:   bridge window [mem 0xdfe00000-0xdfefffff]
>pci 0000:00:01.0:   bridge window [mem 0xbfc00000-0xdfcfffff pref]
>pci 0000:00:01.0: setting latency timer to 64
>pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
>pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
>pci_bus 0000:01: resource 2 [mem 0xbfc00000-0xdfcfffff pref]
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 8192 bind 8192)
>TCP reno registered
>UDP hash table entries: 128 (order: 0, 4096 bytes)
>UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
>NET: Registered protocol family 1
>pci 0000:00:01.0: disabling DAC on VIA PCI bridge
>pci 0000:01:00.0: Boot video device
>PCI: CLS 32 bytes, default 32
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 891k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1265317602.313:1): initialized
>HugeTLB registered 4 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 494
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler cfq registered (default)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>brd: module loaded
>loop: module loaded
>console [netcon0] enabled
>netconsole: network logging started
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>PM: Resume from disk failed.
>registered taskstats version 1
>  Magic number: 14:566:145
>Freeing unused kernel memory: 400k freed
>input: AT Translated Set 2 keyboard as /class/input/input0
>Uniform Multi-Platform E-IDE driver
>ide-gd driver 1.18
>via82cxxx 0000:00:11.1: VIA vt8233a (rev 00) IDE UDMA133
>via82cxxx 0000:00:11.1: IDE controller (0x1106:0x0571 rev 0x06)
>VIA_IDE 0000:00:11.1: can't derive routing for PCI INT A
>via82cxxx 0000:00:11.1: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xfc00-0xfc07
>    ide1: BM-DMA at 0xfc08-0xfc0f
>Probing IDE interface ide0...
>hda: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive
>hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/66 mode selected
>Probing IDE interface ide1...
>hdc: ST3160021A, ATA DISK drive
>hdd: SAMSUNG SP0802N, ATA DISK drive
>hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>hdc: UDMA/100 mode selected
>hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>hdd: UDMA/100 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>hdc: max request size: 512KiB
>hdc: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63
>hdc: cache flushes supported
> hdc: hdc1 hdc2 < hdc5 hdc6 >
>hdd: max request size: 512KiB
>hdd: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63
>hdd: cache flushes supported
> hdd: hdd1 hdd2 hdd3
> hdd3: <netbsd: hdd5 hdd6bad subpartition - ignored
>bad subpartition - ignored
> hdd7 hdd8 >
>ide-cd driver 5.00
>ide-cd: hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
>Uniform CD-ROM driver Revision: 3.20
>EXT3-fs (hdc1): recovery required on readonly filesystem
>EXT3-fs (hdc1): write access will be enabled during recovery
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (hdc1): recovery complete
>EXT3-fs (hdc1): mounted filesystem with writeback data mode
>EXT3-fs (hdc1): warning: maximal mount count reached, running e2fsck is recommended
>EXT3-fs (hdc1): using internal journal
>i2c /dev entries driver
>ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts with ACPI region SMOV [0x400-0x406]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>w83627hf: Found W83697HF chip at 0x290
>Linux video capture interface: v2.00
>Linux agpgart interface v0.103
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (hdc5): warning: maximal mount count reached, running e2fsck is recommended
>EXT3-fs (hdc5): using internal journal
>EXT3-fs (hdc5): mounted filesystem with writeback data mode
>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>XFS mounting filesystem hdc6
>Ending clean XFS mount for filesystem: hdc6
>input: Power Button as /class/input/input1
>ACPI: Power Button [PWRB]
>input: Sleep Button as /class/input/input2
>ACPI: Sleep Button [SLPB]
>input: Power Button as /class/input/input3
>ACPI: Power Button [PWRF]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>agpgart: Detected VIA KT266/KY266x/KT333 chipset
>agpgart-via 0000:00:00.0: AGP aperture is 32M @ 0xe0000000
>8139too Fast Ethernet driver 0.9.28
>8139too 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>eth0: RealTek RTL8139 at 0xd081ef00, 00:e0:4c:66:01:63, IRQ 16
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Floppy drive(s): fd0 is 1.44M
>gameport: NS558 PnP Gameport is pnp00:05/gameport0, io 0x208, speed 946kHz
>parport_pc 00:04: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>FDC 0 is a post-1991 82077
>rtc_cmos 00:08: RTC can wake from S4
>rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 114 bytes nvram
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:06.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:06.2: EHCI Host Controller
>ehci_hcd 0000:00:06.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:06.2: irq 19, io mem 0xdffffe00
>ppdev: user-space parallel port driver
>ehci_hcd 0000:00:06.2: USB 2.0 started, EHCI 0.95
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.33-rc6-i486 ehci_hcd
>usb usb1: SerialNumber: 0000:00:06.2
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>saa7130/34: v4l2 driver version 0.2.15 loaded
>saa7134 0000:00:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>saa7130[0]: found at 0000:00:08.0, rev: 1, irq: 19, latency: 64, mmio: 0xdffff800
>saa7130[0]: subsystem: 1461:2115, board: AverMedia AverTV Studio 305 [card=35,autodetected]
>saa7130[0]: board init: gpio is 10000
>input: saa7134 IR (AverMedia AverTV St as /class/input/input4
>IRQ 19/saa7130[0]: IRQF_DISABLED is not guaranteed on shared IRQs
>uhci_hcd: USB Universal Host Controller Interface driver
>saa7130[0]: i2c eeprom 00: 61 14 15 21 ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>tuner 0-0043: chip found @ 0x86 (saa7130[0])
>tda9887 0-0043: creating new instance
>tda9887 0-0043: tda988[5/6/7] found
>tuner 0-0061: chip found @ 0xc2 (saa7130[0])
>tuner-simple 0-0061: creating new instance
>tuner-simple 0-0061: type set to 51 (Philips PAL/SECAM_D (FM 1256 I-H3))
>saa7130[0]: registered device video0 [v4l2]
>saa7130[0]: registered device vbi0
>saa7130[0]: registered device radio0
>uhci_hcd 0000:00:06.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>uhci_hcd 0000:00:06.0: UHCI Host Controller
>uhci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:06.0: irq 17, io base 0x0000e400
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.33-rc6-i486 uhci_hcd
>usb usb2: SerialNumber: 0000:00:06.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
>VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
>usb 2-2: new low speed USB device using uhci_hcd and address 2
>usb 2-2: New USB device found, idVendor=045e, idProduct=0083
>usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-2: Product: Basic Optical Mouse
>usb 2-2: Manufacturer: Microsoft
>uhci_hcd 0000:00:06.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
>uhci_hcd 0000:00:06.1: UHCI Host Controller
>uhci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:06.1: irq 18, io base 0x0000e800
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.33-rc6-i486 uhci_hcd
>usb usb3: SerialNumber: 0000:00:06.1
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>uhci_hcd 0000:00:11.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:11.2: UHCI Host Controller
>uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:11.2: irq 21, io base 0x0000d800
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.33-rc6-i486 uhci_hcd
>usb usb4: SerialNumber: 0000:00:11.2
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>uhci_hcd 0000:00:11.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:11.3: UHCI Host Controller
>uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:11.3: irq 21, io base 0x0000dc00
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.33-rc6-i486 uhci_hcd
>usb usb5: SerialNumber: 0000:00:11.3
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>input: Microsoft Basic Optical Mouse as /class/input/input5
>usbcore: registered new interface driver usbmouse
>usbmouse: v1.6:USB HID Boot Protocol mouse driver
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>mice: PS/2 mouse device common for all mice
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>usb 3-1: New USB device found, idVendor=03f0, idProduct=0a01
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=12
>usb 3-1: Product: hp scanjet scanner
>usb 3-1: Manufacturer: Hewlett-Packard
>usb 3-1: SerialNumber: CN35TS10W8
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>usb 4-2: New USB device found, idVendor=04e8, idProduct=326c
>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 4-2: Product: Samsung ML-2010
>usb 4-2: Manufacturer: Samsung
>usb 4-2: SerialNumber: 3D66BKBLC20560F.
>usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x326C
>usbcore: registered new interface driver usblp
>NET: Registered protocol family 10
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: unable to find recovery directory /var/lib/nfs/v4recovery
>NFSD: starting 90-second grace period
>svc: failed to register lockdv1 RPC service (errno 97).
>warning: `squid' uses 32-bit capabilities (legacy support in use)
>eth0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>[drm:drm_init], 
>[drm:drm_get_dev], 
>radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>[drm:drm_get_minor], 
>[drm:drm_get_minor], new minor assigned 64
>[drm:drm_get_minor], 
>[drm:drm_get_minor], new minor assigned 0
>[drm] radeon: Initializing kernel modesetting.
>[drm] register mmio base: 0xDFEF0000
>[drm] register mmio size: 65536
>[drm:radeon_get_bios], COMBIOS detected
>[drm] GPU reset succeed (RBBM_STATUS=0x00000140)
>[drm] Generation 2 PCI interface, using max accessible memory
>[drm] AGP mode requested: 1
>agpgart-via 0000:00:00.0: AGP 2.0 bridge
>agpgart-via 0000:00:00.0: putting AGP V2 device into 1x mode
>radeon 0000:01:00.0: putting AGP V2 device into 1x mode
>[drm] radeon: VRAM 128M
>[drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
>[drm] radeon: GTT 32M
>[drm] radeon: GTT from 0xE0000000 to 0xE1FFFFFF
>[drm:drm_irq_install], irq=16
>[drm] radeon: irq initialized.
>[drm] Detected VRAM RAM=128M, BAR=128M
>[drm] RAM width 64bits DDR
>[TTM] Zone  kernel: Available graphics memory: 126786 kiB.
>[drm] radeon: 64M of VRAM memory ready
>[drm] radeon: 32M of GTT memory ready.
>[drm] radeon: cp idle (0x02000603)
>[drm:r100_cp_init_microcode], 
>[drm] Loading R200 Microcode
>platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin
>[drm] radeon: ring at 0x00000000E0000000
>[drm] ring test succeeded in 0 usecs
>[drm] radeon: ib pool ready.
>[drm] ib test succeeded in 0 usecs
>[drm:drm_sysfs_connector_add], adding "VGA-1" to sysfs
>[drm:drm_sysfs_hotplug_event], generating hotplug event
>[drm] Default TV standard: NTSC
>[drm] 27.000000000 MHz TV ref clk
>[drm] DFP table revision: 4
>[drm:radeon_legacy_get_tmds_info_from_combios], TMDS PLL From COMBIOS 13000 1f400f4
>[drm:radeon_legacy_get_tmds_info_from_combios], TMDS PLL From COMBIOS 500 1f400f7
>[drm:radeon_legacy_get_tmds_info_from_combios], TMDS PLL From COMBIOS 20000 1f40111
>[drm:radeon_legacy_get_tmds_info_from_combios], TMDS PLL From COMBIOS 0 4e20000c
>[drm:drm_sysfs_connector_add], adding "DVI-I-1" to sysfs
>[drm:drm_sysfs_hotplug_event], generating hotplug event
>[drm] Default TV standard: NTSC
>[drm] 27.000000000 MHz TV ref clk
>[drm:drm_sysfs_connector_add], adding "SVIDEO-1" to sysfs
>[drm:drm_sysfs_hotplug_event], generating hotplug event
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_DAC1
>[drm] Connector 1:
>[drm]   DVI-I
>[drm]   HPD1
>[drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
>[drm]   Encoders:
>[drm]     CRT2: INTERNAL_DAC2
>[drm]     DFP1: INTERNAL_TMDS1
>[drm] Connector 2:
>[drm]   S-video
>[drm]   Encoders:
>[drm]     TV1: INTERNAL_DAC2
>[drm:r100_hw_i2c_xfer], i2c write error 0x04800302
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>radeon 0000:01:00.0: DVI-I-1: EDID invalid.
>[drm:radeon_legacy_primary_dac_dpms], 
>[drm:radeon_legacy_tv_dac_dpms], 
>[drm:radeon_legacy_tmds_int_dpms], 
>[drm:drm_vblank_get], enabling vblank on crtc 0, ret: 0
>[drm:drm_update_vblank_count], enabling vblank interrupts on crtc 0, missed 47866
>[drm:drm_vblank_get], enabling vblank on crtc 1, ret: 0
>[drm:drm_update_vblank_count], enabling vblank interrupts on crtc 1, missed 0
>[drm:r100_hw_i2c_xfer], i2c write error 0x04800302
>[drm:radeon_combios_connected_scratch_regs], CRT1 connected
>[drm:r100_hw_i2c_xfer], i2c write error 0x04800302
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>radeon 0000:01:00.0: DVI-I-1: EDID invalid.
>[drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID
>[drm:radeon_combios_connected_scratch_regs], CRT2 disconnected
>[drm:radeon_combios_connected_scratch_regs], DFP1 disconnected
>[drm:radeon_combios_connected_scratch_regs], TV1 disconnected
>[drm] fb mappable at 0xD0040000
>[drm] vram apper at 0xD0000000
>[drm] size 3145728
>[drm] fb depth is 24
>[drm]    pitch is 4096
>[drm:radeon_encoder_set_active_device], setting active device to 00000001 from 00000001 00000001 for encoder 1
>[drm:radeon_legacy_primary_dac_dpms], 
>[drm:radeon_legacy_tv_dac_dpms], 
>[drm:radeon_legacy_tmds_int_dpms], 
>[drm:radeon_crtc_set_base], 
>[drm:r100_bandwidth_update], GRPH_BUFFER_CNTL from to 20135c5c
>[drm:radeon_set_crtc_timing], 
>[drm:radeon_set_pll], 
>[drm:radeon_compute_pll], PLL freq 65000 2 1023
>[drm:radeon_set_pll], dc=6500, fd=130, rd=9, pd=6
>[drm:radeon_set_pll], Wrote: 0x00000009 0x00060082 0x00000000 (0x00008f00)
>[drm:radeon_set_pll], Wrote: rd=9, fd=130, pd=6
>[drm:drm_crtc_helper_set_mode], DAC-9: set mode 1024x768 15
>[drm:radeon_legacy_primary_dac_mode_set], 
>[drm:radeon_legacy_primary_dac_dpms], 
>[drm:radeon_legacy_tv_dac_dpms], 
>[drm:radeon_legacy_tmds_int_dpms], 
>Console: switching to colour frame buffer device 128x48
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
>[drm:vblank_disable_fn], disabling vblank on crtc 0
>Adding 399992k swap on /swap.file.  Priority:-1 extents:728 across:2152036k 
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>radeon 0000:01:00.0: DVI-I-1: EDID invalid.
>[drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>radeon 0000:01:00.0: DVI-I-1: EDID invalid.
>[drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>radeon 0000:01:00.0: DVI-I-1: EDID invalid.
>[drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>[drm:edid_is_valid] *ERROR* Raw EDID:
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
><3>00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff 00 ff  ................
>
>radeon 0000:01:00.0: DVI-I-1: EDID invalid.
>[drm:radeon_dvi_detect] *ERROR* DVI-I-1: probed a monitor but no|invalid EDID

Actions: View

Attachments on bug 26430: 33075 | 33076 | 33339 | 33498 | 33953 | 33961 | 33973 | 34005 | 34014 | 34042 | 34124

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.