Attachment 36138 Details for Bug 28440 – 2.6.34 kernel's KMS doesn't support X1250 well.

2.6.34 kernel's KMS doesn't support X1250 well.

dmesg.txt (text/plain), 30.28 KB, created by crocket on 2010-06-08 04:06:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: crocket

Created: 2010-06-08 04:06:59 UTC

Size: 30.28 KB

patch

obsolete

>red tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:01:05.0: Boot video device
>PCI: CLS 32 bytes, default 64
>audit: initializing netlink socket (disabled)
>type=2000 audit(1275991820.366:1): initialized
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>ROMFS MTD (C) 2007 Red Hat, Inc.
>msgmni has been set to 5515
>alg: No test for cipher_null (cipher_null-generic)
>alg: No test for ecb(cipher_null) (ecb-cipher_null)
>alg: No test for digest_null (digest_null-generic)
>alg: No test for compress_null (compress_null-generic)
>alg: No test for fcrypt (fcrypt-generic)
>alg: No test for stdrng (krng)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pcieport 0000:00:04.0: setting latency timer to 64
>pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
>pcieport 0000:00:06.0: setting latency timer to 64
>pcieport 0000:00:06.0: irq 25 for MSI/MSI-X
>pcieport 0000:00:07.0: setting latency timer to 64
>pcieport 0000:00:07.0: irq 26 for MSI/MSI-X
>pcieport 0000:00:04.0: Requesting control of PCIe PME from ACPI BIOS
>pcieport 0000:00:04.0: Failed to receive control of PCIe PME service: no _OSC support
>pcie_pme: probe of 0000:00:04.0:pcie01 failed with error -13
>pcieport 0000:00:06.0: Requesting control of PCIe PME from ACPI BIOS
>pcieport 0000:00:06.0: Failed to receive control of PCIe PME service: no _OSC support
>pcie_pme: probe of 0000:00:06.0:pcie01 failed with error -13
>pcieport 0000:00:07.0: Requesting control of PCIe PME from ACPI BIOS
>pcieport 0000:00:07.0: Failed to receive control of PCIe PME service: no _OSC support
>pcie_pme: probe of 0000:00:07.0:pcie01 failed with error -13
>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000e00000, using 3072k, total 16384k
>vesafb: mode is 1024x768x16, linelength=2048, pages=9
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>floppy0: no floppy controllers found
>brd: module loaded
>loop: module loaded
>Loading iSCSI transport class v2.0-870.
>ahci 0000:00:12.0: version 3.0
>ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22
>ata2: SATA max UDMA/133 abar m1024@0xf4209000 port 0xf4209180 irq 22
>ata3: SATA max UDMA/133 abar m1024@0xf4209000 port 0xf4209200 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xf4209000 port 0xf4209280 irq 22
>pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pata_atiixp 0000:00:14.1: setting latency timer to 64
>scsi4 : pata_atiixp
>scsi5 : pata_atiixp
>ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
>ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>cpuidle: using governor menu
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WH01, max UDMA/33
>ata5.00: configured for UDMA/33
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata2: SATA link down (SStatus 0 SControl 300)
>ata1: softreset failed (device not ready)
>ata1: applying SB600 PMP SRST workaround and retrying
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: Hitachi HTS542525K9A300, BBFOC3EP, max UDMA/133
>ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WH01 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> sda:
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
> sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>registered taskstats version 1
>EXT4-fs (sda5): mounted filesystem with ordered data mode
>VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
>devtmpfs: mounted
>Freeing unused kernel memory: 576k freed
>Write protecting the kernel read-only data: 8192k
>Freeing unused kernel memory: 1572k freed
>Freeing unused kernel memory: 604k freed
>udev: starting version 153
>ACPI: AC Adapter [AC] (on-line)
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button [SLPB]
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
>ACPI: Lid Switch [LID0]
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>ACPI: Power Button [PWRF]
>HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ACPI: Battery Slot [CMB0] (battery present)
>ACPI: WMI: Mapper loaded
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 4:0:0:0: Attached scsi generic sg1 type 5
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
>acpi device:2a: registered as cooling_device0
>Monitor-Mwait will be used to enter C-1 state
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:28/LNXVIDEO:00/input/input5
>Monitor-Mwait will be used to enter C-2 state
>Marking TSC unstable due to TSC halts in idle
>Switching to clocksource hpet
>ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
>hda_codec: ALC262: BIOS auto-probing.
>ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>HDA Intel 0000:01:05.2: irq 27 for MSI/MSI-X
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 19, io mem 0xf4209400
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.34-smp ehci_hcd
>usb usb1: SerialNumber: 0000:00:13.5
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>thermal LNXTHERM:01: registered as thermal_zone0
>ACPI: Thermal Zone [TZ1] (40 C)
>piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
>rtc_cmos 00:04: RTC can wake from S4
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
>cfg80211: Calling CRDA to update world regulatory domain
>ACPI: Fan [FAN0] (off)
>usb 1-9: new high speed USB device using ehci_hcd and address 4
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04711/0x200000/0x0
>[drm] Initialized drm 1.1.0 20060810
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
>usb 1-9: New USB device found, idVendor=0c45, idProduct=62c0
>usb 1-9: New USB device strings: Mfr=2, Product=1, SerialNumber=3
>usb 1-9: Product: LG Webcam
>usb 1-9: Manufacturer: LG Innotek
>usb 1-9: SerialNumber: 1.3.2.1.7
>ath5k 0000:08:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>ath5k 0000:08:00.0: setting latency timer to 64
>ath5k 0000:08:00.0: registered as 'phy0'
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>[drm] initializing kernel modesetting (RS600 0x1002:0x7942).
>[drm] register mmio base: 0xDFEF0000
>[drm] register mmio size: 65536
>ATOM BIOS: ATI
>[drm] GPU reset succeed (RBBM_STATUS=0x10000140)
>[drm] 1 Power State(s)
>[drm] State 0 Default (default)
>[drm] 	1 Clock Mode(s)
>[drm] 		0 engine: 500000
>[drm] radeon: power management initialized
>radeon 0000:01:05.0: VRAM: 256M 0xB0000000 - 0xBFFFFFFF (256M used)
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>radeon 0000:01:05.0: GTT: 512M 0x90000000 - 0xAFFFFFFF
>[drm] radeon: irq initialized.
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>[drm] Detected VRAM RAM=256M, BAR=256M
>[drm] RAM width 128bits DDR
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xf4004000
>[TTM] Zone  kernel: Available graphics memory: 1413326 kiB.
>[drm] radeon: 256M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] radeon: 1 quad pipes, 1 z pipes initialized.
>[drm] radeon: cp idle (0x10000C03)
>[drm] Loading RS600 Microcode
>platform radeon_cp.0: firmware: requesting radeon/RS600_cp.bin
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: OHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.34-smp ohci_hcd
>usb usb2: SerialNumber: 0000:00:13.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xf4005000
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.34-smp ohci_hcd
>usb usb3: SerialNumber: 0000:00:13.1
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.2: irq 18, io mem 0xf4006000
>Linux video capture interface: v2.00
>uvcvideo: Found UVC 1.00 device LG Webcam (0c45:62c0)
>input: LG Webcam as /devices/pci0000:00/0000:00:13.5/usb1/1-9/1-9:1.0/input/input7
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.34-smp ohci_hcd
>usb usb4: SerialNumber: 0000:00:13.2
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.3: irq 17, io mem 0xf4007000
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.34-smp ohci_hcd
>[drm] radeon: ring at 0x0000000090000000
>[drm] ring test succeeded in 0 usecs
>[drm] radeon: ib pool ready.
>usb usb5: SerialNumber: 0000:00:13.3
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.4: irq 18, io mem 0xf4008000
>ath: EEPROM regdomain: 0x60
>ath: EEPROM indicates we should expect a direct regpair map
>ath: Country alpha2 being used: 00
>ath: Regpair used: 0x60
>phy0: Selected rate control algorithm 'minstrel'
>Registered led device: ath5k-phy0::rx
>Registered led device: ath5k-phy0::tx
>ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: OHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.34-smp ohci_hcd
>usb usb6: SerialNumber: 0000:00:13.4
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>cfg80211: World regulatory domain updated:
>    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>usb 2-2: new low speed USB device using ohci_hcd and address 2
>usb 2-2: New USB device found, idVendor=0566, idProduct=3002
>usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 3-1: new full speed USB device using ohci_hcd and address 2
>usb 3-1: New USB device found, idVendor=046d, idProduct=c049
>usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 3-1: Product: USB Gaming Mouse
>usb 3-1: Manufacturer: Logitech
>usbcore: registered new interface driver hiddev
>input: HID 0566:3002 as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input8
>generic-usb 0003:0566:3002.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 0566:3002] on usb-0000:00:13.0-2/input0
>input: HID 0566:3002 as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.1/input/input9
>generic-usb 0003:0566:3002.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [HID 0566:3002] on usb-0000:00:13.0-2/input1
>input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input10
>generic-usb 0003:046D:C049.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:13.1-1/input0
>generic-usb 0003:046D:C049.0004: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:13.1-1/input1
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>[drm:radeon_fence_wait] *ERROR* fence(ffff8800ad62eb40:0x00000001) 510ms timeout going to reset GPU
>[drm] CP reset succeed (RBBM_STATUS=0x10000140)
>[drm] radeon: cp idle (0x10000000)
>[drm] radeon: ring at 0x0000000090000000
>[drm:r100_ring_test] *ERROR* radeon: ring test failed (sracth(0x15E8)=0xCAFEDEAD)
>[drm:r100_cp_init] *ERROR* radeon: cp isn't working (-22).
>[drm:r300_gpu_reset] *ERROR* Failed to reset GPU (RBBM_STATUS=0x90010140)
>[drm:radeon_fence_wait] *ERROR* fence(ffff8800ad62eb40:0x00000001) 660ms timeout
>[drm:radeon_fence_wait] *ERROR* last signaled fence(0x00000001)
>[drm:r100_ib_test] *ERROR* radeon: ib test failed (sracth(0x15E4)=0xCAFEDEAD)
>radeon 0000:01:05.0: failled testing IB (-22).
>radeon 0000:01:05.0: failled initializing IB (-22).
>radeon 0000:01:05.0: Disabling GPU acceleration
>[drm:r100_cp_fini] *ERROR* Wait for CP idle timeout, shutting down CP.
>Failed to wait GUI idle while programming pipes. Bad things might happen.
>[drm] radeon: cp finalized
>radeon 0000:01:05.0: ffff8800ad6cea00 unpin not necessary
>[drm] Default TV standard: NTSC
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   VGA
>[drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
>[drm]   Encoders:
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm] Connector 1:
>[drm]   LVDS
>[drm]   DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
>[drm]   Encoders:
>[drm]     LCD1: INTERNAL_LVTM1
>[drm] Connector 2:
>[drm]   HDMI-A
>[drm]   HPD2
>[drm]   DDC: 0x7e40 0x7e60 0x7e44 0x7e64 0x7e48 0x7e68 0x7e4c 0x7e6c
>[drm]   Encoders:
>[drm]     DFP2: INTERNAL_DDI
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 01 ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff fe 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 01 ff ff ff ff ff ff ff ff ff ff ff  ................
>
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>
>radeon 0000:01:05.0: VGA-1: EDID invalid.
>[drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>
>radeon 0000:01:05.0: VGA-1: EDID invalid.
>[drm] fb mappable at 0xE0040000
>[drm] vram apper at 0xE0000000
>[drm] size 4096000
>[drm] fb depth is 24
>[drm]    pitch is 5120
>fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
>Console: switching to colour dummy device 80x25
>Console: switching to colour frame buffer device 128x48
>fb0: radeondrmfb frame buffer device
>registered panic notifier
>[drm] Initialized radeon 2.3.0 20080528 for 0000:01:05.0 on minor 0
>Adding 778236k swap on /dev/sda6.  Priority:-1 extents:1 across:778236k 
>fuse init (API version 7.13)
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: Found 2 processor cores.
>VBoxDrv: dbg - g_abExecMemory=ffffffffa056cd40
>vboxdrv: fAsync=0 offMin=0x1a4 offMax=0x84c
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 3.2.0 (interface 0x00140001).
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
>
>[drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 07 ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
>
>CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 03 ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff fc 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>
>radeon 0000:01:05.0: VGA-1: EDID invalid.
>input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input11
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 0f ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
>
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
>
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 7f ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
>
>[drm:drm_edid_is_valid] *ERROR* Raw EDID:
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
><3>00 00 00 00 00 00 00 00 00 7f ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
><3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff  ................
>
>radeon 0000:01:05.0: VGA-1: EDID invalid.
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>wlan0: authenticate with 0a:0e:dc:2b:2b:34 (try 1)
>wlan0: authenticated
>wlan0: associate with 0a:0e:dc:2b:2b:34 (try 1)
>wlan0: RX AssocResp from 0a:0e:dc:2b:2b:34 (capab=0x431 status=0 aid=1)
>wlan0: associated
>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>cfg80211: Calling CRDA for country: KR
>cfg80211: Current regulatory domain updated by AP to: KR
>    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>    (2402000 KHz - 2482000 KHz @ 20000 KHz), (N/A, 2000 mBm)
>wlan0: no IPv6 routers present

Actions: View

Attachments on bug 28440: 36138

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.