Attachment 37346 Details for Bug 29221 – dmesg after applying the patch Jesse suggested in #11

dmesg after applying the patch Jesse suggested in #11

dmesg.txt (text/plain), 15.07 KB, created by Dongxu Li on 2010-07-23 17:09:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dongxu Li

Created: 2010-07-23 17:09:23 UTC

Size: 15.07 KB

patch

obsolete

>00:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>mtrr: no more MTRRs available
>[drm] MTRR allocation failed.  Graphics performance may suffer.
>  alloc irq_desc for 26 on node -1
>  alloc kstat_irqs on node -1
>i915 0000:00:02.0: irq 26 for MSI/MSI-X
>[drm] set up 127M of stolen space
>------------[ cut here ]------------
>WARNING: at drivers/gpu/drm/i915/intel_lvds.c:65 intel_lvds_set_power+0x135/0x1a0()
>Hardware name: NV79            
>Modules linked in:
>Pid: 1, comm: swapper Not tainted 2.6.34-gentoo-r2 #5
>Call Trace:
> [<ffffffff81041743>] ? warn_slowpath_common+0x73/0xb0
> [<ffffffff812b5875>] ? intel_lvds_set_power+0x135/0x1a0
> [<ffffffff8127ba92>] ? drm_helper_disable_unused_functions+0x162/0x170
> [<ffffffff8127cd29>] ? drm_helper_initial_config+0x9/0x50
> [<ffffffff812991cf>] ? i915_driver_load+0xedf/0x10d0
> [<ffffffff81287cde>] ? drm_get_minor+0x1ce/0x2c0
> [<ffffffff81288101>] ? drm_get_dev+0x331/0x520
> [<ffffffff8114a0b1>] ? sysfs_addrm_finish+0x21/0xe0
> [<ffffffff8114a70d>] ? sysfs_add_one+0x2d/0x130
> [<ffffffff811effe2>] ? local_pci_probe+0x12/0x20
> [<ffffffff811f0c4a>] ? pci_device_probe+0x10a/0x130
> [<ffffffff812d2eea>] ? driver_sysfs_add+0x5a/0x80
> [<ffffffff812d3013>] ? driver_probe_device+0x93/0x190
> [<ffffffff812d31a3>] ? __driver_attach+0x93/0xa0
> [<ffffffff812d3110>] ? __driver_attach+0x0/0xa0
> [<ffffffff812d24b8>] ? bus_for_each_dev+0x58/0x80
> [<ffffffff812d2772>] ? bus_add_driver+0xd2/0x270
> [<ffffffff812d34a0>] ? driver_register+0x70/0x130
> [<ffffffff811f0ebc>] ? __pci_register_driver+0x4c/0xc0
> [<ffffffff810b7ef8>] ? register_shrinker+0x18/0x50
> [<ffffffff816ca455>] ? i915_init+0x0/0x95
> [<ffffffff810001d4>] ? do_one_initcall+0x34/0x1d0
> [<ffffffff816a56e4>] ? kernel_init+0x151/0x1db
> [<ffffffff81003414>] ? kernel_thread_helper+0x4/0x10
> [<ffffffff816a5593>] ? kernel_init+0x0/0x1db
> [<ffffffff81003410>] ? kernel_thread_helper+0x0/0x10
>---[ end trace 70c02da18817ccc1 ]---
>fbcon: inteldrmfb (fb0) is primary device
>------------[ cut here ]------------
>WARNING: at drivers/gpu/drm/i915/intel_lvds.c:65 intel_lvds_set_power+0x135/0x1a0()
>Hardware name: NV79            
>Modules linked in:
>Pid: 1, comm: swapper Tainted: G        W  2.6.34-gentoo-r2 #5
>Call Trace:
> [<ffffffff81041743>] ? warn_slowpath_common+0x73/0xb0
> [<ffffffff812b5875>] ? intel_lvds_set_power+0x135/0x1a0
> [<ffffffff8127be23>] ? drm_crtc_helper_set_mode+0x323/0x3c0
> [<ffffffff8127d680>] ? drm_crtc_helper_set_config+0x880/0x950
> [<ffffffff8127a0b8>] ? drm_fb_helper_pan_display+0xd8/0x110
> [<ffffffff8122b9bf>] ? fb_pan_display+0xdf/0x130
> [<ffffffff8123b501>] ? bit_update_start+0x21/0x50
> [<ffffffff81238e4a>] ? fbcon_switch+0x45a/0x490
> [<ffffffff8121e316>] ? redraw_screen+0x136/0x240
> [<ffffffff81221361>] ? vc_do_resize+0x491/0x4a0
> [<ffffffff811d6827>] ? ida_get_new_above+0x97/0x210
> [<ffffffff8123a1f0>] ? fbcon_init+0x2b0/0x570
> [<ffffffff8121dcf3>] ? visual_init+0xd3/0x160
> [<ffffffff8121e5f5>] ? bind_con_driver+0x1d5/0x3e0
> [<ffffffff8121e844>] ? take_over_console+0x44/0x70
> [<ffffffff81236972>] ? fbcon_takeover+0x62/0xc0
> [<ffffffff810645f6>] ? notifier_call_chain+0x46/0x70
> [<ffffffff810649ee>] ? __blocking_notifier_call_chain+0x5e/0x90
> [<ffffffff8122c9d9>] ? register_framebuffer+0x249/0x330
> [<ffffffff812303e6>] ? fb_alloc_cmap+0x116/0x120
> [<ffffffff8127a5fd>] ? drm_fb_helper_single_fb_probe+0x3fd/0x4c0
> [<ffffffff812bd920>] ? intelfb_create+0x0/0x4c0
> [<ffffffff8127cd5e>] ? drm_helper_initial_config+0x3e/0x50
> [<ffffffff812991cf>] ? i915_driver_load+0xedf/0x10d0
> [<ffffffff81287cde>] ? drm_get_minor+0x1ce/0x2c0
> [<ffffffff81288101>] ? drm_get_dev+0x331/0x520
> [<ffffffff8114a0b1>] ? sysfs_addrm_finish+0x21/0xe0
> [<ffffffff8114a70d>] ? sysfs_add_one+0x2d/0x130
> [<ffffffff811effe2>] ? local_pci_probe+0x12/0x20
> [<ffffffff811f0c4a>] ? pci_device_probe+0x10a/0x130
> [<ffffffff812d2eea>] ? driver_sysfs_add+0x5a/0x80
> [<ffffffff812d3013>] ? driver_probe_device+0x93/0x190
> [<ffffffff812d31a3>] ? __driver_attach+0x93/0xa0
> [<ffffffff812d3110>] ? __driver_attach+0x0/0xa0
> [<ffffffff812d24b8>] ? bus_for_each_dev+0x58/0x80
> [<ffffffff812d2772>] ? bus_add_driver+0xd2/0x270
> [<ffffffff812d34a0>] ? driver_register+0x70/0x130
> [<ffffffff811f0ebc>] ? __pci_register_driver+0x4c/0xc0
> [<ffffffff810b7ef8>] ? register_shrinker+0x18/0x50
> [<ffffffff816ca455>] ? i915_init+0x0/0x95
> [<ffffffff810001d4>] ? do_one_initcall+0x34/0x1d0
> [<ffffffff816a56e4>] ? kernel_init+0x151/0x1db
> [<ffffffff81003414>] ? kernel_thread_helper+0x4/0x10
> [<ffffffff816a5593>] ? kernel_init+0x0/0x1db
> [<ffffffff81003410>] ? kernel_thread_helper+0x0/0x10
>---[ end trace 70c02da18817ccc2 ]---
>Console: switching to colour frame buffer device 200x56
>fb0: inteldrmfb frame buffer device
>registered panic notifier
>acpi device:02: registered as cooling_device4
>acpi device:03: registered as cooling_device5
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
>ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>brd: module loaded
>loop: module loaded
>SCSI Media Changer driver v0.25 
>ahci 0000:00:1f.2: version 3.0
>  alloc irq_desc for 19 on node -1
>  alloc kstat_irqs on node -1
>ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>  alloc irq_desc for 27 on node -1
>  alloc kstat_irqs on node -1
>ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
>ahci: SSS flag set, parallel bus scan disabled
>ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405100 irq 27
>ata2: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405180 irq 27
>ata3: DUMMY
>ata4: DUMMY
>ata5: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405300 irq 27
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
>i2c /dev entries driver
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
>ACPI: resource 0000:00:1f.3 [io  0x3000-0x301f] conflicts with ACPI region SMBI [io  0x3000-0x300f 64bit pref window disabled]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>cpuidle: using governor ladder
>cpuidle: using governor menu
>ioatdma: Intel(R) QuickData Technology Driver 4.00
>  alloc irq_desc for 22 on node -1
>  alloc kstat_irqs on node -1
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>  alloc irq_desc for 28 on node -1
>  alloc kstat_irqs on node -1
>HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
>hda_codec: ALC272: BIOS auto-probing.
>ALSA device list:
>  #0: HDA Intel at 0xd4400000 irq 28
>TCP cubic registered
>NET: Registered protocol family 17
>rtc_cmos 00:06: setting system clock to 2010-07-23 19:58:51 UTC (1279915131)
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-8: Hitachi HTS545032B9A300, PB3OC60F, max UDMA/133
>ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATAPI: Optiarc DVD RW AD-7585H, KX04, max UDMA/100
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7585H  KX04 PQ: 0 ANSI: 5
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>ata5: SATA link down (SStatus 0 SControl 300)
>EXT4-fs (sda7): mounted filesystem with ordered data mode
>VFS: Mounted root (ext4 filesystem) readonly on device 8:7.
>Freeing unused kernel memory: 448k freed
>udev: starting version 160
>iTCO_vendor_support: vendor-support=0
>ACPI: AC Adapter [AC] (on-line)
>tg3.c:v3.108 (February 17, 2010)
>tg3 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>tg3 0000:01:00.0: setting latency timer to 64
>tg3 mdio bus: probed
>tg3 0000:01:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 70:5a:b6:19:5e:98
>tg3 0000:01:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=100:01)
>tg3 0000:01:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>tg3 0000:01:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ACPI: Battery Slot [BAT0] (battery present)
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: EHCI Host Controller
>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.0: debug port 2
>ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd4405c00
>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.34-gentoo-r2 ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>  alloc irq_desc for 23 on node -1
>  alloc kstat_irqs on node -1
>ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: EHCI Host Controller
>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.0: debug port 2
>ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd4405800
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
>iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.34-gentoo-r2 ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>cfg80211: Calling CRDA to update world regulatory domain
>ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>ath9k 0000:02:00.0: setting latency timer to 64
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>usb 1-1: New USB device found, idVendor=8087, idProduct=0020
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 6 ports detected
>usb 2-1: new high speed USB device using ehci_hcd and address 2
>ath: EEPROM regdomain: 0x65
>ath: EEPROM indicates we should expect a direct regpair map
>ath: Country alpha2 being used: 00
>ath: Regpair used: 0x65
>phy0: Selected rate control algorithm 'ath9k_rate_control'
>Registered led device: ath9k-phy0::radio
>Registered led device: ath9k-phy0::assoc
>Registered led device: ath9k-phy0::tx
>Registered led device: ath9k-phy0::rx
>phy0: Atheros AR9280 Rev:2 mem=0xffffc90011820000, irq=17
>usb 2-1: New USB device found, idVendor=8087, idProduct=0020
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 8 ports detected
>usb 1-1.2: new high speed USB device using ehci_hcd and address 3
>usb 1-1.2: New USB device found, idVendor=064e, idProduct=a103
>usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
>usb 1-1.2: Product: Video WebCam
>usb 1-1.2: Manufacturer: SuYin
>usb 1-1.2: SerialNumber: CN0314-SN30-OV035-VA-R05.00.00
>Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa44000/0xa0000
>Linux video capture interface: v2.00
>uvcvideo: Found UVC 1.00 device Video WebCam (064e:a103)
>usb 2-1.3: new high speed USB device using ehci_hcd and address 3
>input: Video WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
>usb 2-1.3: New USB device found, idVendor=1058, idProduct=0704
>usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-1.3: Product: External HDD    
>usb 2-1.3: Manufacturer: Western Digital 
>usb 2-1.3: SerialNumber: 575845333038443343353734
>Initializing USB Mass Storage driver...
>scsi5 : usb-storage 2-1.3:1.0
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>scsi 5:0:0:0: Direct-Access     WD       3200BEV External 1.05 PQ: 0 ANSI: 4
>sd 5:0:0:0: Attached scsi generic sg2 type 0
>sd 5:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
>sd 5:0:0:0: [sdb] Write Protect is off
>sd 5:0:0:0: [sdb] Mode Sense: 21 00 00 00
>sd 5:0:0:0: [sdb] Assuming drive cache: write through
>sd 5:0:0:0: [sdb] Assuming drive cache: write through
> sdb:
>EXT4-fs (sda5): mounted filesystem with ordered data mode
>Adding 975868k swap on /dev/sda6.  Priority:-1 extents:1 across:975868k 
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>wlan0: authenticate with 00:13:46:1b:be:ba (try 1)
>wlan0: authenticated
>wlan0: associate with 00:13:46:1b:be:ba (try 1)
>wlan0: RX AssocResp from 00:13:46:1b:be:ba (capab=0x401 status=0 aid=3)
>wlan0: associated
> sdb1
>sd 5:0:0:0: [sdb] Assuming drive cache: write through
>sd 5:0:0:0: [sdb] Attached SCSI disk
>Bridge firewalling registered
>device qtap0 entered promiscuous mode
>br0: port 1(qtap0) entering learning state
>device qtap1 entered promiscuous mode
>br0: port 2(qtap1) entering learning state
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
>sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>tun0: Disabled Privacy Extensions
>qtap0: no IPv6 routers present
>br0: no IPv6 routers present
>wlan0: no IPv6 routers present
>qtap1: no IPv6 routers present
>br0: port 1(qtap0) entering forwarding state
>br0: port 2(qtap1) entering forwarding state
>ata1: hard resetting link
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: configured for UDMA/133
>ata1: EH complete

Actions: View

Attachments on bug 29221: 37322 | 37326 | 37333 | 37337 | 37346 | 37402 | 37406

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.