Attachment 39835 Details for Bug 29278 – dmesg, drm.debug=0xe, no backlight during boot, backlight in X, but black

dmesg, drm.debug=0xe, no backlight during boot, backlight in X, but black

dmesg.out (text/plain), 30.27 KB, created by Elias Probst on 2010-10-28 00:36:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Elias Probst

Created: 2010-10-28 00:36:44 UTC

Size: 30.27 KB

patch

obsolete

>i_bus 0000:04: [bus 04-07] partially hidden behind bridge 0000:03 [bus 03-04]
>pci 0000:00:1c.3: PCI bridge to [bus 05-0a]
>pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.3:   bridge window [mem 0xf2d00000-0xf40fffff]
>pci 0000:00:1c.3:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0: PCI bridge to [bus 0b-0b] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
>pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
>pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
>pci_bus 0000:00: on NUMA node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 9 1f 
>ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
>pci_bus 0000:3f: on NUMA node 0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>SCSI subsystem initialized
>libata version 3.00 loaded.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ACPI: WMI: Mapper loaded
>Advanced Linux Sound Architecture Driver Version 1.0.23.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>reserve RAM buffer: 000000000009ac00 - 000000000009ffff 
>reserve RAM buffer: 00000000db65f000 - 00000000dbffffff 
>Bluetooth: Core ver 2.15
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>cfg80211: Calling CRDA to update world regulatory domain
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>Switching to clocksource tsc
>FS-Cache: Loaded
>CacheFiles: Loaded
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 13 devices
>ACPI: ACPI bus type pnp unregistered
>system 00:05: [io  0x0680-0x069f] has been reserved
>system 00:05: [io  0x1000-0x1003] has been reserved
>system 00:05: [io  0x1004-0x1013] has been reserved
>system 00:05: [io  0xffff] has been reserved
>system 00:05: [io  0x0400-0x047f] has been reserved
>system 00:05: [io  0x0500-0x057f] has been reserved
>system 00:05: [io  0x164e-0x164f] has been reserved
>system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
>system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
>system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
>system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
>system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
>system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
>system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
>system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
>system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
>system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
>system 00:0a: [mem 0xf69c0000-0xf69c0fff] has been reserved
>pci 0000:00:1c.2: BAR 9: can't assign mem pref (size 0x4000000)
>pci 0000:00:1c.0: BAR 9: assigned [mem 0xf6a00000-0xf6bfffff 64bit pref]
>pci 0000:00:1c.1: BAR 9: assigned [mem 0xf6c00000-0xf6dfffff 64bit pref]
>pci 0000:00:1c.3: BAR 9: assigned [mem 0xf6e00000-0xf6ffffff 64bit pref]
>pci 0000:00:1c.0: PCI bridge to [bus 01-01]
>pci 0000:00:1c.0:   bridge window [io  0x6000-0x6fff]
>pci 0000:00:1c.0:   bridge window [mem 0xf5500000-0xf68fffff]
>pci 0000:00:1c.0:   bridge window [mem 0xf6a00000-0xf6bfffff 64bit pref]
>pci 0000:00:1c.1: PCI bridge to [bus 02-02]
>pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
>pci 0000:00:1c.1:   bridge window [mem 0xf4100000-0xf54fffff]
>pci 0000:00:1c.1:   bridge window [mem 0xf6c00000-0xf6dfffff 64bit pref]
>pci 0000:03:00.0: BAR 9: can't assign mem pref (size 0x4000000)
>pci 0000:03:00.0: BAR 10: can't assign mem (size 0x4000000)
>pci 0000:03:00.0: BAR 7: assigned [io  0x2000-0x20ff]
>pci 0000:03:00.0: BAR 8: assigned [io  0x2400-0x24ff]
>pci 0000:03:00.0: CardBus bridge to [bus 04-07]
>pci 0000:03:00.0:   bridge window [io  0x2000-0x20ff]
>pci 0000:03:00.0:   bridge window [io  0x2400-0x24ff]
>pci 0000:00:1c.2: PCI bridge to [bus 03-04]
>pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
>pci 0000:00:1c.2:   bridge window [mem 0xf0400000-0xf2cfffff]
>pci 0000:00:1c.2:   bridge window [mem pref disabled]
>pci 0000:00:1c.3: PCI bridge to [bus 05-0a]
>pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
>pci 0000:00:1c.3:   bridge window [mem 0xf2d00000-0xf40fffff]
>pci 0000:00:1c.3:   bridge window [mem 0xf6e00000-0xf6ffffff 64bit pref]
>pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
>pci 0000:00:1e.0:   bridge window [io  disabled]
>pci 0000:00:1e.0:   bridge window [mem disabled]
>pci 0000:00:1e.0:   bridge window [mem pref disabled]
>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>pci 0000:00:1c.0: setting latency timer to 64
>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
>pci 0000:00:1c.1: setting latency timer to 64
>pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>pci 0000:00:1c.2: setting latency timer to 64
>pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>pci 0000:03:00.0: setting latency timer to 64
>pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff]
>pci_bus 0000:01: resource 0 [io  0x6000-0x6fff]
>pci_bus 0000:01: resource 1 [mem 0xf5500000-0xf68fffff]
>pci_bus 0000:01: resource 2 [mem 0xf6a00000-0xf6bfffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
>pci_bus 0000:02: resource 1 [mem 0xf4100000-0xf54fffff]
>pci_bus 0000:02: resource 2 [mem 0xf6c00000-0xf6dfffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0x2000-0x3fff]
>pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf2cfffff]
>pci_bus 0000:04: resource 0 [io  0x2000-0x20ff]
>pci_bus 0000:04: resource 1 [io  0x2400-0x24ff]
>pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
>pci_bus 0000:05: resource 1 [mem 0xf2d00000-0xf40fffff]
>pci_bus 0000:05: resource 2 [mem 0xf6e00000-0xf6ffffff 64bit pref]
>pci_bus 0000:0b: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:0b: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:0b: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:0b: resource 7 [mem 0xe0000000-0xfeafffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>UDP hash table entries: 2048 (order: 4, 65536 bytes)
>UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>NET: Registered protocol family 1
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>pci 0000:00:02.0: Boot video device
>PCI: CLS 64 bytes, default 64
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing 64MB software IO TLB between ffff880006200000 - ffff88000a200000
>software IO TLB at phys 0x6200000 - 0xa200000
>Simple Boot Flag at 0xf1 set to 0x1
>microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
>microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
>microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
>microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>audit: initializing netlink socket (disabled)
>type=2000 audit(1288258016.334:1): initialized
>squashfs: version 4.0 (2009/01/31) Phillip Lougher
>FS-Cache: Netfs 'nfs' registered for caching
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NTFS driver 2.1.29 [Flags: R/O].
>ROMFS MTD (C) 2007 Red Hat, Inc.
>fuse init (API version 7.15)
>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>Btrfs loaded
>msgmni has been set to 7505
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered (default)
>io scheduler deadline registered
>io scheduler cfq registered
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 0 15 
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 0 15 
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 0 15 
>\_SB_.PCI0:_OSC invalid UUID
>_OSC request data:1 0 15 
>intel_idle: MWAIT substates: 0x1120
>intel_idle: v0.4 model 0x25
>intel_idle: lapic_timer_reliable_states 0xffffffff
>ACPI: AC Adapter [AC] (on-line)
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
>ACPI: Lid Switch [LID]
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
>ACPI: Power Button [PBTN]
>input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
>ACPI: Sleep Button [SBTN]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>ACPI: Power Button [PWRF]
>ACPI: acpi_idle yielding to intel_idle
>Initializing Nozomi driver 2.1d (build date: Oct 24 2010 17:07:19)
>Non-volatile memory driver v1.3
>i8k: unable to get SMM BIOS version
>Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (dz@debian.org)
>Linux agpgart interface v0.103
>agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
>agpgart-intel 0000:00:00.0: detected 32764K stolen memory
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>ipwireless 1.1 by Stephen Blackheath, Ben Martel, Jiri Kosina and David Sterba
>[drm] Initialized drm 1.1.0 20060810
>i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>i915 0000:00:02.0: setting latency timer to 64
>mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
>[drm] MTRR allocation failed.  Graphics performance may suffer.
>[drm] set up 31M of stolen space
>[drm:init_status_page], render ring hws offset: 0x02000000
>[drm:init_status_page], bsd ring hws offset: 0x02021000
>[drm:i915_gtt_to_phys], GTT addr: 0x00000000, PTE: 0xde000001
>[drm:i915_gtt_to_phys], GTT addr: 0x00000000, phys addr: 0xde000000
>[drm:i915_setup_compression], FBC base 0xde000000, ll base 0x00000000, size 8M
>[drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 0 137700 1920 1968 2000 2066 1080 1083 1088 1111 0x8 0xa
>[drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[drm:intel_modeset_init], 2 display pipes available.
>[drm:intel_lvds_init], LVDS is not present in VBT
>[drm:intel_dp_i2c_init], i2c_init DPDDC-A
>[drm:intel_dp_i2c_aux_ch], aux_ch nack
>[drm:intel_dp_i2c_aux_ch], aux_ch nack
>[drm:intel_sdvo_read_byte], i2c transfer returned -6
>[drm:intel_sdvo_init], No SDVO device found on SDVOB
>[drm:intel_dp_i2c_init], i2c_init DPDDC-B
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_i2c_init], i2c_init DPDDC-C
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_i2c_init], i2c_init DPDDC-D
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[drm:ironlake_enable_drps], fmax: 0, fmin: 10, fstart: 0
>[drm:ironlake_edp_backlight_off], 
>[drm:intel_dp_link_down], 
>[drm:ironlake_crtc_dpms], crtc 0/0 dpms off
>[drm:ironlake_disable_fbc], disabled FBC
>[drm:ironlake_crtc_dpms], crtc 1/1 dpms off
>[drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe 1
>[drm:ironlake_crtc_dpms], crtc 1 is disabled
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:Embedded DisplayPort-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x501500e1
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:Embedded DisplayPort-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:VGA-1]
>[drm:intel_ironlake_crt_detect_hotplug], pch crt adpa 0xf50018
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:8:VGA-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI Type A-1]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:HDMI Type A-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DisplayPort-1]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DisplayPort-1] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI Type A-2]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI Type A-2] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI Type A-3]
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:16:HDMI Type A-3] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DisplayPort-2]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DisplayPort-2] disconnected
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DisplayPort-3]
>[drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003e
>[drm:ironlake_dp_detect], DPCD: 0000
>[drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DisplayPort-3] disconnected
>No connectors reported connected with modes
>[drm:drm_setup_crtcs], 
>[drm:drm_enable_connectors], connector 5 enabled? no
>[drm:drm_enable_connectors], connector 8 enabled? no
>[drm:drm_enable_connectors], connector 10 enabled? no
>[drm:drm_enable_connectors], connector 12 enabled? no
>[drm:drm_enable_connectors], connector 14 enabled? no
>[drm:drm_enable_connectors], connector 16 enabled? no
>[drm:drm_enable_connectors], connector 18 enabled? no
>[drm:drm_enable_connectors], connector 20 enabled? no
>[drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[drm] Cannot find any crtc or sizes - going 1024x768
>[drm:intelfb_create], allocated 1024x768 fb: 0x02042000, bo ffff880112df6000
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:3] [FB:22] #connectors=0 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:ironlake_edp_backlight_off], 
>[drm:drm_crtc_helper_set_config], 
>[drm:drm_crtc_helper_set_config], [CRTC:4] [FB:22] #connectors=0 (x y) (0 0)
>[drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
>[drm:ironlake_edp_backlight_off], 
>Console: switching to colour frame buffer device 128x48
>fb0: inteldrmfb frame buffer device
>drm: registered panic notifier
>[drm:intel_opregion_init], graphic opregion physical addr: 0xdb749018
>[drm:intel_opregion_init], Public ACPI methods supported
>[drm:intel_opregion_init], SWSCI supported
>[drm:intel_opregion_init], ASLE supported
>acpi device:42: registered as cooling_device4
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input4
>ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial 0000:00:16.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>0000:00:16.3: ttyS0 at I/O 0x70a0 (irq = 19) is a 16550A
>brd: module loaded
>loop: module loaded
>Uniform Multi-Platform E-IDE driver
>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
>Probing IDE interface ide0...
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>ide1 at 0x170-0x177,0x376 on irq 15
>ide-cd driver 5.00
>SCSI Media Changer driver v0.25 
>ahci 0000:00:1f.2: version 3.0
>ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
>ahci 0000:00:1f.2: setting latency timer to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 18
>ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 18
>ata3: DUMMY
>ata4: DUMMY
>ata5: SATA max UDMA/133 abar m2048@0xf6940000 port 0xf6940300 irq 18
>ata6: SATA max UDMA/133 abar m2048@0xf6940000 port 0xf6940380 irq 18
>PPP generic driver version 2.4.2
>PPP Deflate Compression module registered
>PPP BSD Compression module registered
>PPP MPPE Compression module registered
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
>iwlagn: Copyright(c) 2003-2010 Intel Corporation
>iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>iwlagn 0000:02:00.0: setting latency timer to 64
>iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
>iwlagn 0000:02:00.0: device EEPROM VER=0x436, CALIB=0x6
>iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
>yenta_cardbus 0000:03:00.0: CardBus bridge found [1028:040b]
>yenta_cardbus 0000:03:00.0: CardBus bridge to [bus 04-07]
>yenta_cardbus 0000:03:00.0:   bridge window [io  0x2000-0x20ff]
>yenta_cardbus 0000:03:00.0:   bridge window [io  0x2400-0x24ff]
>yenta_cardbus 0000:03:00.0:   bridge window [mem 0xf0400000-0xf17fffff pref]
>yenta_cardbus 0000:03:00.0:   bridge window [mem 0xf1800000-0xf1bfffff]
>ata6: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-8: OCZ-VERTEX, 1.42, max UDMA/133
>ata2.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>ata2.00: configured for UDMA/133
>ata1.00: ATA-7: SAMSUNG SSD PM800 TH 64GB, VBM24D1Q, max UDMA/100
>ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
>ata1.00: configured for UDMA/100
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG SSD PM80 VBM2 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Direct-Access     ATA      OCZ-VERTEX       1.42 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
> sdb: sdb1 sdb2 sdb3
>sd 0:0:0:0: [sda] Attached SCSI disk
>sd 1:0:0:0: [sdb] Attached SCSI disk
>yenta_cardbus 0000:03:00.0: ISA IRQ mask 0x0000, PCI irq 18
>yenta_cardbus 0000:03:00.0: Socket status: 30000006
>pci_bus 0000:04: Upper limit for fixing this bridge's parent bridge: #04
>yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge window: [io  0x2000-0x3fff]
>yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge window: [mem 0xf0400000-0xf2cfffff]
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0400000-0xf2cfffff: excluding 0xf0400000-0xf1d9ffff 0xf2a70000-0xf2cfffff
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: EHCI Host Controller
>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.0: debug port 2
>ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf6970000
>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.36-rc7+ ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: EHCI Host Controller
>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.0: debug port 2
>ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.0: irq 17, io mem 0xf6950000
>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.36-rc7+ ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>driver u132_hcd built at 17:10:07 on Oct 24 2010
>usbcore: registered new interface driver usblp
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new interface driver usbserial
>USB Serial support registered for generic
>usbcore: registered new interface driver usbserial_generic
>usbserial: USB Serial Driver core
>USB Serial support registered for GSM modem (1-port)
>usbcore: registered new interface driver option
>option: v0.7.2:USB Driver for GSM modems
>USB Serial support registered for pl2303
>usbcore: registered new interface driver pl2303
>pl2303: Prolific PL2303 USB to serial adaptor driver
>driver ftdi-elan built at 17:10:02 on Oct 24 2010
>usbcore: registered new interface driver ftdi-elan
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Warning: Keylock active.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>rtc_cmos 00:06: RTC can wake from S4
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
>i2c /dev entries driver
>i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>ACPI: resource 0000:00:1f.3 [io  0x7000-0x701f] conflicts with ACPI region SMBI [io  0x7000-0x700f pref disabled]
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>lirc_dev: IR Remote Control driver registered, major 250 
>Linux video capture interface: v2.00
>usbcore: registered new interface driver uvcvideo
>USB Video Class driver (v0.1.0)
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
>coretemp coretemp.0: TjMax is 105 C.
>coretemp coretemp.1: TjMax is 105 C.
>lis3lv02d driver loaded.
>device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
>Bluetooth: HCI UART driver ver 2.2
>Bluetooth: HCI H4 protocol initialized
>Bluetooth: HCI BCSP protocol initialized
>Bluetooth: HCILL protocol initialized
>Bluetooth: Generic Bluetooth USB driver ver 0.6
>usbcore: registered new interface driver btusb
>Bluetooth: Generic Bluetooth SDIO driver ver 0.1
>cpuidle: using governor ladder
>cpuidle: using governor menu
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci-pci 0000:03:00.1: SDHCI controller found [1180:e822] (rev 3)
>sdhci-pci 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>mmc0: Unknown controller version (2). You may experience problems.
>sdhci-pci 0000:03:00.1: setting latency timer to 64
>Registered led device: mmc0::
>mmc0: SDHCI controller on PCI [0000:03:00.1] using DMA
>ioatdma: Intel(R) QuickData Technology Driver 4.00
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>input: Dell WMI hotkeys as /devices/virtual/input/input6
>intel ips 0000:00:1f.6: Warning: CPU TDP doesn't match expected value (found 25, expected 35)
>intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 65535
>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
>usbcore: registered new interface driver snd-usb-audio
>ALSA device list:
>  #0: HDA Intel at 0xf6960000 irq 22
>GACT probability on
>Mirror/redirect action on
>Simple TC action Loaded
>netem: version 1.2
>u32 classifier
>    Performance counters on
>    input device check on
>    Actions configured
>Netfilter messages via NETLINK v0.30.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>IPv6 over IPv4 tunneling driver
>sit0: Disabled Privacy Extensions
>ip6tnl0: Disabled Privacy Extensions
>NET: Registered protocol family 17
>NET: Registered protocol family 15
>Bluetooth: L2CAP ver 2.15
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO (Voice Link) ver 0.6
>Bluetooth: SCO socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
>All bugs added by David S. Miller <davem@redhat.com>
>lib80211: common routines for IEEE802.11 drivers
>lib80211_crypt: registered algorithm 'NULL'
>Registering the dns_resolver key type
>registered taskstats version 1
>rtc_cmos 00:06: setting system clock to 2010-10-28 09:26:59 UTC (1288258019)
>Initalizing network drop monitor service
>input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input11
>EXT3-fs (sdb2): error: couldn't mount because of unsupported optional features (240)
>EXT2-fs (sdb2): error: couldn't mount because of unsupported optional features (240)
>EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
>VFS: Mounted root (ext4 filesystem) readonly on device 8:18.
>Freeing unused kernel memory: 596k freed
>usb 1-1: new high speed USB device using ehci_hcd and address 2
>usb 1-1: New USB device found, idVendor=8087, idProduct=0020
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 6 ports detected
>usb 2-1: new high speed USB device using ehci_hcd and address 2
>udev: starting version 151
>udevd (1485): /proc/1485/oom_adj is deprecated, please use /proc/1485/oom_score_adj instead.
>usb 2-1: New USB device found, idVendor=8087, idProduct=0020
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 8 ports detected
>iwlagn 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532
>phy0: Selected rate control algorithm 'iwl-agn-rs'
>usb 1-1.4: new high speed USB device using ehci_hcd and address 3
>e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
>e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
>e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>e1000e 0000:00:19.0: setting latency timer to 64
>e1000e 0000:00:19.0: (unregistered net_device): Failed to initialize MSI interrupts.  Falling back to legacy interrupts.
>usb 1-1.4: New USB device found, idVendor=05ca, idProduct=1814
>usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1.4: Product: Laptop_Integrated_Webcam_3M
>usb 1-1.4: Manufacturer: CN06YWTK7248707F09M1
>uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_3M (05ca:1814)
>input: Laptop_Integrated_Webcam_3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12
>e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:26:b9:f7:9d:4c
>e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
>e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: 2041ff-0ff
>usb 2-1.7: new full speed USB device using ehci_hcd and address 3
>usb 2-1.7: New USB device found, idVendor=413c, idProduct=8187
>usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-1.7: Product: DW375 Bluetooth Module
>usb 2-1.7: Manufacturer: Dell Computer Corp
>usb 2-1.7: SerialNumber: 1C659D01A0F8
>usb 2-1.8: new full speed USB device using ehci_hcd and address 4
>usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5800
>usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-1.8: Product: 5880
>usb 2-1.8: Manufacturer: Broadcom Corp
>usb 2-1.8: SerialNumber: 0123456789ABCD
>usb 2-1.8: config 0 descriptor??
>EXT4-fs (sdb2): re-mounted. Opts: (null)
>EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>Adding 979960k swap on /dev/sdb3.  Priority:-1 extents:1 across:979960k SS
>ADDRCONF(NETDEV_UP): wlan0: link is not ready
>ADDRCONF(NETDEV_UP): eth0: link is not ready

Actions: View

Attachments on bug 29278: 37419 | 37420 | 37794 | 37795 | 38110 | 38127 | 38527 | 38538 | 38750 | 38805 | 38810 | 38828 | 38868 | 38987 | 39104 | 39293 | 39835 | 39836 | 39970 | 39971 | 40116 | 40505 | 40515 | 40516 | 40517 | 40518 | 40543 | 41121 | 41675 | 41830 | 43401

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.