Attachment 57645 Details for Bug 45018 – dmesg after lock with latest patch

dmesg after lock with latest patch

dmesg_patched.txt (text/plain), 70.98 KB, created by Alexandre Demers on 2012-02-25 17:31:17 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alexandre Demers

Created: 2012-02-25 17:31:17 UTC

Size: 70.98 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 3.3.0-rc5 (dema1701@Xander) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #115 SMP Sat Feb 25 19:10:10 EST 2012
>Command line: BOOT_IMAGE=/vmlinuz-3.3.0-rc5 root=/dev/sda3 ro quiet splash vt.handoff=7 radeon.pcie_gen2=1
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000098400 (usable)
> BIOS-e820: 0000000000098400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cfd81000 (usable)
> BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS)
> BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data)
> BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
>NX (Execute Disable) protection: active
>DMI 2.4 present.
>DMI: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS 12b 08/17/2010
>e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
>e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
>No AGP bridge found
>last_pfn = 0x230000 max_arch_pfn = 0x400000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-FFFFF uncachable
>MTRR variable ranges enabled:
>  0 base 000000000000 mask FFFF80000000 write-back
>  1 base 000080000000 mask FFFFC0000000 write-back
>  2 base 0000C0000000 mask FFFFF0000000 write-back
>  3 base 0000CFE00000 mask FFFFFFE00000 uncachable
>  4 base 000100000000 mask FFFF00000000 write-back
>  5 base 000200000000 mask FFFFE0000000 write-back
>  6 base 000220000000 mask FFFFF0000000 write-back
>  7 disabled
>TOM2: 0000000230000000 aka 8960M
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>original variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 1GB, type WB
>reg 2, base: 3GB, range: 256MB, type WB
>reg 3, base: 3326MB, range: 2MB, type UC
>reg 4, base: 4GB, range: 4GB, type WB
>reg 5, base: 8GB, range: 512MB, type WB
>reg 6, base: 8704MB, range: 256MB, type WB
>total RAM covered: 3326M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 4M 	num_reg: 4  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 2GB, type WB
>reg 1, base: 2GB, range: 1GB, type WB
>reg 2, base: 3GB, range: 256MB, type WB
>reg 3, base: 3326MB, range: 2MB, type UC
>e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
>last_pfn = 0xcfd81 max_arch_pfn = 0x400000000
>found SMP MP-table at [ffff8800000f57c0] f57c0
>initial memory mapped : 0 - 20000000
>Base memory trampoline at [ffff880000093000] 93000 size 20480
>Using GB pages for direct mapping
>init_memory_mapping: 0000000000000000-00000000cfd81000
> 0000000000 - 00c0000000 page 1G
> 00c0000000 - 00cfc00000 page 2M
> 00cfc00000 - 00cfd81000 page 4k
>kernel direct mapping tables up to cfd81000 @ 1fffd000-20000000
>init_memory_mapping: 0000000100000000-0000000230000000
> 0100000000 - 0200000000 page 1G
> 0200000000 - 0230000000 page 2M
>kernel direct mapping tables up to 230000000 @ cfd7f000-cfd81000
>ACPI: RSDP 00000000000f7120 00014 (v00 GBT   )
>ACPI: RSDT 00000000cfde3000 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: FACP 00000000cfde3040 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: DSDT 00000000cfde30c0 06BFA (v01 GBT    GBTUACPI 00001000 MSFT 03000000)
>ACPI: FACS 00000000cfde0000 00040
>ACPI: SSDT 00000000cfde9d80 012F6 (v01 PTLTD  POWERNOW 00000001  LTP 00000001)
>ACPI: HPET 00000000cfdeb080 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>ACPI: MCFG 00000000cfdeb0c0 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: APIC 00000000cfde9cc0 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>ACPI: Local APIC address 0xfee00000
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000230000000
>Initmem setup node 0 0000000000000000-0000000230000000
>  NODE_DATA [000000022ffeb000 - 000000022fffffff]
> [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000010 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00230000
>Movable zone start PFN for each node
>Early memory PFN ranges
>    0: 0x00000010 -> 0x00000098
>    0: 0x00000100 -> 0x000cfd81
>    0: 0x00100000 -> 0x00230000
>On node 0 totalpages: 2096393
>  DMA zone: 64 pages used for memmap
>  DMA zone: 5 pages reserved
>  DMA zone: 3907 pages, LIFO batch:0
>  DMA32 zone: 16320 pages used for memmap
>  DMA32 zone: 830913 pages, LIFO batch:31
>  Normal zone: 19456 pages used for memmap
>  Normal zone: 1225728 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>SMP: Allowing 8 CPUs, 2 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 0000000000098000 - 0000000000099000
>PM: Registered nosave memory: 0000000000099000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>PM: Registered nosave memory: 00000000cfd81000 - 00000000cfde0000
>PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000
>PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000
>PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000
>PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000
>PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
>PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
>PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
>Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000)
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
>PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s83328 r8192 d23168 u262144
>pcpu-alloc: s83328 r8192 d23168 u262144 alloc=1*2097152
>pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2060548
>Policy zone: Normal
>Kernel command line: BOOT_IMAGE=/vmlinuz-3.3.0-rc5 root=/dev/sda3 ro quiet splash vt.handoff=7 radeon.pcie_gen2=1
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 0 size 32 MB
>Your BIOS doesn't leave a aperture memory hole
>Please enable the IOMMU option in the BIOS setup
>This costs you 64 MB of RAM
>Mapping aperture over 65536 KB of RAM @ c4000000
>PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
>Memory: 8099268k/9175040k available (4914k kernel code, 789468k absent, 286304k reserved, 6126k data, 892k init)
>SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>Hierarchical RCU implementation.
>NR_IRQS:16640 nr_irqs:744 16
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>console [tty0] enabled
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:  8
>... MAX_LOCK_DEPTH:          48
>... MAX_LOCKDEP_KEYS:        8191
>... CLASSHASH_SIZE:          4096
>... MAX_LOCKDEP_ENTRIES:     16384
>... MAX_LOCKDEP_CHAINS:      32768
>... CHAINHASH_SIZE:          16384
> memory used by lock dependency info: 5855 kB
> per task-struct memory footprint: 1920 bytes
>allocated 33554432 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>hpet clockevent registered
>Fast TSC calibration using PIT
>Detected 2913.480 MHz processor.
>Calibrating delay loop (skipped), value calculated using timer frequency.. 5826.96 BogoMIPS (lpj=2913480)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys debug
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys blkio
>Initializing cgroup subsys perf_event
>tseg: 00cfe00000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>mce: CPU supports 6 MCE banks
>using AMD E400 aware idle routine
>ACPI: Core revision 20120111
>ftrace: allocating 21710 entries in 85 pages
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: AMD Phenom(tm) II X6 1065T Processor stepping 00
>Performance Events: AMD PMU driver.
>... version:                0
>... bit width:              48
>... generic registers:      4
>... value mask:             0000ffffffffffff
>... max period:             00007fffffffffff
>... fixed-purpose events:   0
>... event mask:             000000000000000f
>NMI watchdog enabled, takes one hw-pmu counter.
>lockdep: fixing up alternatives.
>Booting Node   0, Processors  #1
>smpboot cpu 1: start_ip = 93000
>System has AMD C1E enabled
>Switch to broadcast mode on CPU1
>NMI watchdog enabled, takes one hw-pmu counter.
>lockdep: fixing up alternatives.
> #2
>smpboot cpu 2: start_ip = 93000
>NMI watchdog enabled, takes one hw-pmu counter.
>Switch to broadcast mode on CPU2
>lockdep: fixing up alternatives.
> #3
>smpboot cpu 3: start_ip = 93000
>NMI watchdog enabled, takes one hw-pmu counter.
>Switch to broadcast mode on CPU3
>lockdep: fixing up alternatives.
> #4
>smpboot cpu 4: start_ip = 93000
>NMI watchdog enabled, takes one hw-pmu counter.
>Switch to broadcast mode on CPU4
>lockdep: fixing up alternatives.
> #5
>smpboot cpu 5: start_ip = 93000
>NMI watchdog enabled, takes one hw-pmu counter.
>Switch to broadcast mode on CPU5
>Brought up 6 CPUs
>Total of 6 processors activated (34961.76 BogoMIPS).
>Switch to broadcast mode on CPU0
>devtmpfs: initialized
>PM: Registering ACPI NVS region at cfde0000 (12288 bytes)
>print_constraints: dummy: 
>RTC time: 20:21:41, date: 02/25/12
>NET: Registered protocol family 16
>node 0 link 0: io port [c000, ffff]
>TOM: 00000000d0000000 aka 3328M
>Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [d0000000, dfffffff]
>node 0 link 0: mmio [f0000000, fe02ffff]
>node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
>TOM2: 0000000230000000 aka 8960M
>bus: [00, 03] on node 0 link 0
>bus: 00 index 0 [io  0x0000-0xffff]
>bus: 00 index 1 [mem 0x000a0000-0x000bffff]
>bus: 00 index 2 [mem 0xd0000000-0xdfffffff]
>bus: 00 index 3 [mem 0xe0400000-0xffffffff]
>bus: 00 index 4 [mem 0xe0100000-0xe03fffff]
>bus: 00 index 5 [mem 0x230000000-0xfcffffffff]
>ACPI: bus type pci registered
>PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
>pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
>pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfebfffff]
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
>pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
>pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff]
>pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
>pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
>pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
>pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
>pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
>pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
>pci 0000:00:11.0: reg 10: [io  0xff00-0xff07]
>pci 0000:00:11.0: reg 14: [io  0xfe00-0xfe03]
>pci 0000:00:11.0: reg 18: [io  0xfd00-0xfd07]
>pci 0000:00:11.0: reg 1c: [io  0xfc00-0xfc03]
>pci 0000:00:11.0: reg 20: [io  0xfb00-0xfb0f]
>pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
>pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
>pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff]
>pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
>pci 0000:00:12.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
>pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
>pci 0000:00:12.2: reg 10: [mem 0xfe02c000-0xfe02c0ff]
>pci 0000:00:12.2: supports D1 D2
>pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
>pci 0000:00:13.0: reg 10: [mem 0xfe02b000-0xfe02bfff]
>pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
>pci 0000:00:13.1: reg 10: [mem 0xfe02a000-0xfe02afff]
>pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
>pci 0000:00:13.2: reg 10: [mem 0xfe029000-0xfe0290ff]
>pci 0000:00:13.2: supports D1 D2
>pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
>pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
>pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
>pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
>pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
>pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
>pci 0000:00:14.1: reg 20: [io  0xfa00-0xfa0f]
>pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
>pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
>pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
>pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
>pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
>pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
>pci 0000:00:14.5: reg 10: [mem 0xfe028000-0xfe028fff]
>pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
>pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
>pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
>pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
>pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
>pci 0000:01:00.0: [1002:6719] type 0 class 0x000300
>pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:01:00.0: reg 18: [mem 0xfdfc0000-0xfdfdffff 64bit]
>pci 0000:01:00.0: reg 20: [io  0xee00-0xeeff]
>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:01:00.1: [1002:aa80] type 0 class 0x000403
>pci 0000:01:00.1: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
>pci 0000:01:00.1: supports D1 D2
>pci 0000:00:02.0: PCI bridge to [bus 01-01]
>pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:02.0:   bridge window [mem 0xfdf00000-0xfdffffff]
>pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
>pci 0000:02:00.0: reg 10: [io  0xde00-0xdeff]
>pci 0000:02:00.0: reg 18: [mem 0xfdbff000-0xfdbfffff 64bit pref]
>pci 0000:02:00.0: reg 20: [mem 0xfdbe0000-0xfdbeffff 64bit pref]
>pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>pci 0000:02:00.0: supports D1 D2
>pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0a.0: PCI bridge to [bus 02-02]
>pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
>pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci 0000:03:0e.0: [104c:8024] type 0 class 0x000c00
>pci 0000:03:0e.0: reg 10: [mem 0xfddff000-0xfddff7ff]
>pci 0000:03:0e.0: reg 14: [mem 0xfddf8000-0xfddfbfff]
>pci 0000:03:0e.0: supports D1 D2
>pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
>pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
>pci 0000:00:14.4:   bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
> pci0000:00: Requesting ACPI _OSC control (0x1d)
> pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
>ACPI _OSC control for PCIe not granted, disabling ASPM
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:01:00.0
>SCSI subsystem initialized
>libata version 3.00 loaded.
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
>reserve RAM buffer: 0000000000098400 - 000000000009ffff 
>reserve RAM buffer: 00000000cfd81000 - 00000000cfffffff 
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 comparators, 32-bit 14.318180 MHz counter
>Switching to clocksource hpet
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp 00:00: [bus 00-ff]
>pnp 00:00: [io  0x0cf8-0x0cff]
>pnp 00:00: [io  0x0000-0x0cf7 window]
>pnp 00:00: [io  0x0d00-0xffff window]
>pnp 00:00: [mem 0x000a0000-0x000bffff window]
>pnp 00:00: [mem 0x000c0000-0x000dffff window]
>pnp 00:00: [mem 0xfed40000-0xfed44fff window]
>pnp 00:00: [mem 0xcff00000-0xfebfffff window]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
>pnp 00:01: [io  0x0010-0x001f]
>pnp 00:01: [io  0x0022-0x003f]
>pnp 00:01: [io  0x0044-0x004d]
>pnp 00:01: [io  0x0050-0x005f]
>pnp 00:01: [io  0x0062-0x0063]
>pnp 00:01: [io  0x0065-0x006f]
>pnp 00:01: [io  0x0074-0x007f]
>pnp 00:01: [io  0x0091-0x0093]
>pnp 00:01: [io  0x00a2-0x00bf]
>pnp 00:01: [io  0x00e0-0x00ef]
>pnp 00:01: [io  0x04d0-0x04d1]
>pnp 00:01: [io  0x0220-0x0225]
>pnp 00:01: [io  0x0290-0x0294]
>system 00:01: [io  0x04d0-0x04d1] has been reserved
>system 00:01: [io  0x0220-0x0225] has been reserved
>system 00:01: [io  0x0290-0x0294] has been reserved
>system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:02: [io  0x4100-0x411f]
>pnp 00:02: [io  0x0228-0x022f]
>pnp 00:02: [io  0x0238-0x023f]
>pnp 00:02: [io  0x040b]
>pnp 00:02: [io  0x04d6]
>pnp 00:02: [io  0x0c00-0x0c01]
>pnp 00:02: [io  0x0c14]
>pnp 00:02: [io  0x0c50-0x0c52]
>pnp 00:02: [io  0x0c6c-0x0c6d]
>pnp 00:02: [io  0x0c6f]
>pnp 00:02: [io  0x0cd0-0x0cd1]
>pnp 00:02: [io  0x0cd2-0x0cd3]
>pnp 00:02: [io  0x0cd4-0x0cdf]
>pnp 00:02: [io  0x4000-0x40fe]
>pnp 00:02: [io  0x4210-0x4217]
>pnp 00:02: [io  0x0b00-0x0b0f]
>pnp 00:02: [io  0x0b10-0x0b1f]
>pnp 00:02: [io  0x0b20-0x0b3f]
>pnp 00:02: [mem 0x00000000-0x00000fff window]
>pnp 00:02: [mem 0xfee00400-0xfee00fff window]
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
>pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0000ffff pref]
>system 00:02: [io  0x4100-0x411f] has been reserved
>system 00:02: [io  0x0228-0x022f] has been reserved
>system 00:02: [io  0x0238-0x023f] has been reserved
>system 00:02: [io  0x040b] has been reserved
>system 00:02: [io  0x04d6] has been reserved
>system 00:02: [io  0x0c00-0x0c01] has been reserved
>system 00:02: [io  0x0c14] has been reserved
>system 00:02: [io  0x0c50-0x0c52] has been reserved
>system 00:02: [io  0x0c6c-0x0c6d] has been reserved
>system 00:02: [io  0x0c6f] has been reserved
>system 00:02: [io  0x0cd0-0x0cd1] has been reserved
>system 00:02: [io  0x0cd2-0x0cd3] has been reserved
>system 00:02: [io  0x0cd4-0x0cdf] has been reserved
>system 00:02: [io  0x4000-0x40fe] has been reserved
>system 00:02: [io  0x4210-0x4217] has been reserved
>system 00:02: [io  0x0b00-0x0b0f] has been reserved
>system 00:02: [io  0x0b10-0x0b1f] has been reserved
>system 00:02: [io  0x0b20-0x0b3f] has been reserved
>system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
>system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:03: [dma 4]
>pnp 00:03: [io  0x0000-0x000f]
>pnp 00:03: [io  0x0080-0x0090]
>pnp 00:03: [io  0x0094-0x009f]
>pnp 00:03: [io  0x00c0-0x00df]
>pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:04: [irq 0 disabled]
>pnp 00:04: [irq 8]
>pnp 00:04: [mem 0xfed00000-0xfed003ff]
>pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
>pnp 00:05: [io  0x0070-0x0073]
>pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:06: [io  0x0061]
>pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
>pnp 00:07: [io  0x00f0-0x00ff]
>pnp 00:07: [irq 13]
>pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:08: [io  0x03f8-0x03ff]
>pnp 00:08: [irq 4]
>pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
>pnp 00:09: [io  0x0378-0x037f]
>pnp 00:09: [irq 7]
>pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
>pnp 00:0a: [mem 0xe0000000-0xefffffff]
>system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
>system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:0b: [mem 0x000d4400-0x000d7fff]
>pnp 00:0b: [mem 0x000f0000-0x000f7fff]
>pnp 00:0b: [mem 0x000f8000-0x000fbfff]
>pnp 00:0b: [mem 0x000fc000-0x000fffff]
>pnp 00:0b: [mem 0xcfde0000-0xcfdeffff]
>pnp 00:0b: [mem 0xffff0000-0xffffffff]
>pnp 00:0b: [mem 0x00000000-0x0009ffff]
>pnp 00:0b: [mem 0x00100000-0xcfddffff]
>pnp 00:0b: [mem 0xcfdf0000-0xcfdfffff]
>pnp 00:0b: [mem 0xcfe00000-0xcfefffff]
>pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
>pnp 00:0b: [mem 0xfec00000-0xfec00fff]
>pnp 00:0b: [mem 0xfee00000-0xfee00fff]
>pnp 00:0b: [mem 0xfff80000-0xfffeffff]
>pnp 00:0b: disabling [mem 0x000d4400-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0b: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0b: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0b: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0b: disabling [mem 0x00100000-0xcfddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
>pnp 00:0b: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xe00fffff]; adding more reservations
>system 00:0b: [mem 0xcfde0000-0xcfdeffff] could not be reserved
>system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
>system 00:0b: [mem 0xcfdf0000-0xcfdfffff] has been reserved
>system 00:0b: [mem 0xcfe00000-0xcfefffff] could not be reserved
>system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
>system 00:0b: [mem 0xfee00000-0xfee00fff] could not be reserved
>system 00:0b: [mem 0xfff80000-0xfffeffff] has been reserved
>system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: max bus depth: 1 pci_try_num: 2
>pci 0000:01:00.0: BAR 6: assigned [mem 0xfdf00000-0xfdf1ffff pref]
>pci 0000:00:02.0: PCI bridge to [bus 01-01]
>pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
>pci 0000:00:02.0:   bridge window [mem 0xfdf00000-0xfdffffff]
>pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
>pci 0000:02:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb0ffff pref]
>pci 0000:00:0a.0: PCI bridge to [bus 02-02]
>pci 0000:00:0a.0:   bridge window [io  0xd000-0xdfff]
>pci 0000:00:0a.0:   bridge window [mem 0xfde00000-0xfdefffff]
>pci 0000:00:0a.0:   bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci 0000:00:14.4: PCI bridge to [bus 03-03]
>pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
>pci 0000:00:14.4:   bridge window [mem 0xfdd00000-0xfddfffff]
>pci 0000:00:14.4:   bridge window [mem 0xfdc00000-0xfdcfffff pref]
>pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
>pci_bus 0000:00: resource 9 [mem 0xcff00000-0xfebfffff]
>pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>pci_bus 0000:01: resource 1 [mem 0xfdf00000-0xfdffffff]
>pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
>pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
>pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
>pci_bus 0000:02: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
>pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
>pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
>pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
>pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
>pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
>pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
>pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
>pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff]
>pci_bus 0000:03: resource 9 [mem 0xcff00000-0xfebfffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
>TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>UDP hash table entries: 4096 (order: 7, 655360 bytes)
>UDP-Lite hash table entries: 4096 (order: 7, 655360 bytes)
>pci 0000:01:00.0: Boot video device
>PCI: CLS 64 bytes, default 64
>PCI-DMA: Disabling AGP.
>PCI-DMA: aperture base @ c4000000 size 65536 KB
>PCI-DMA: using GART IOMMU.
>PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
>IBS: LVT offset 1 assigned
>perf: AMD IBS detected (0x0000001f)
>audit: initializing netlink socket (disabled)
>type=2000 audit(1330201300.683:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>fuse init (API version 7.18)
>Btrfs loaded
>msgmni has been set to 15947
>SELinux:  Registering netfilter hooks
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>start plist test
>end plist test
>pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
>pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
>GHES: HEST is not enabled!
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Non-volatile memory driver v1.3
>brd: module loaded
>loop: module loaded
>ahci 0000:00:11.0: version 3.0
>ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
>ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
>ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
>ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
>ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22
>ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22
>Fixed MDIO Bus: probed
>i8042: PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Registering the dns_resolver key type
>PM: Hibernation image not present or could not be loaded.
>registered taskstats version 1
>IMA: No TPM chip found, activating TPM-bypass!
>  Magic number: 0:798:397
>mem random: hash matches
>/home/dema1701/projects/kernel/linux-3/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Initializing network drop monitor service
>ata6: SATA link down (SStatus 0 SControl 300)
>ata3: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata2: softreset failed (device not ready)
>ata2: applying PMP SRST workaround and retrying
>ata1: softreset failed (device not ready)
>ata1: applying PMP SRST workaround and retrying
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.00, max UDMA/100
>ata2.00: configured for UDMA/100
>ata1.00: HPA detected: current 312579695, native 312581808
>ata1.00: ATA-8: WDC WD1600AAJS-00B4A0, 01.03A01, max UDMA/133
>ata1.00: 312579695 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 312579695 512-byte logical blocks: (160 GB/149 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22NS30 1.00 PQ: 0 ANSI: 5
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Refined TSC clocksource calibration: 2913.267 MHz.
>Switching to clocksource tsc
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>md: Waiting for all devices to be available before autodetect
>md: If you don't use raid, use raid=noautodetect
>md: Autodetecting RAID arrays.
>md: Scanned 0 and added 0 devices.
>md: autorun ...
>md: ... autorun DONE.
>EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
>EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (244)
>EXT4-fs (sda3): INFO: recovery required on readonly filesystem
>EXT4-fs (sda3): write access will be enabled during recovery
>EXT4-fs (sda3): recovery complete
>EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
>devtmpfs: mounted
>Freeing unused kernel memory: 892k freed
>Write protecting the kernel read-only data: 10240k
>Freeing unused kernel memory: 1212k freed
>Freeing unused kernel memory: 1632k freed
>NET: Registered protocol family 1
>init: ureadahead main process (81) terminated with status 5
>udevd[116]: starting version 173
>lp: driver loaded but no devices found
>ACPI: processor limited to max C-state 1
>wmi: Mapper loaded
>parport_pc 00:09: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>ACPI: Power Button [PWRF]
>rtc_cmos 00:05: RTC can wake from S4
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
>ppdev: user-space parallel port driver
>scsi6 : pata_atiixp
>scsi7 : pata_atiixp
>ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
>ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
>ata7.00: HPA detected: current 488388911, native 488397168
>ata7.00: ATA-7: Maxtor 6L250R0, BAH41F90, max UDMA/133
>ata7.00: 488388911 sectors, multi 16: LBA48 
>ata7.00: configured for UDMA/100
>scsi 6:0:0:0: Direct-Access     ATA      Maxtor 6L250R0   BAH4 PQ: 0 ANSI: 5
>sd 6:0:0:0: [sdb] 488388911 512-byte logical blocks: (250 GB/232 GiB)
>sd 6:0:0:0: Attached scsi generic sg2 type 0
>sd 6:0:0:0: [sdb] Write Protect is off
>sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb:
>sd 6:0:0:0: [sdb] Attached SCSI disk
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:02:00.0: irq 42 for MSI/MSI-X
>r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90011d16000, 00:1f:d0:5b:f5:b2, XID 1c4000c0 IRQ 42
>r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
>ehci_hcd 0000:00:12.2: EHCI Host Controller
>ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6
>ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
>ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>QUIRK: Enable AMD PLL fix
>ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
>ehci_hcd 0000:00:12.2: debug port 1
>ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:12.2: MWI active
>ehci_hcd 0000:00:12.2: supports USB remote wakeup
>ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
>ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
>ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
>usb usb1: default language 0x0409
>usb usb1: udev 1, busnum 1, minor = 0
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 3.3.0-rc5 ehci_hcd
>usb usb1: SerialNumber: 0000:00:12.2
>usb usb1: usb_probe_device
>usb usb1: configuration #1 chosen from 1 choice
>usb usb1: adding 1-0:1.0 (config #1, interface 0)
>hub 1-0:1.0: usb_probe_interface
>hub 1-0:1.0: usb_probe_interface - got id
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>hub 1-0:1.0: standalone hub
>hub 1-0:1.0: no power switching (usb 1.0)
>hub 1-0:1.0: individual port over-current protection
>hub 1-0:1.0: power on to power good time: 20ms
>hub 1-0:1.0: local power source is good
>hub 1-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6
>ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
>ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
>ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
>ehci_hcd 0000:00:13.2: debug port 1
>ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
>ehci_hcd 0000:00:13.2: MWI active
>ehci_hcd 0000:00:13.2: supports USB remote wakeup
>ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
>ehci_hcd 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
>firewire_ohci: Added fw-ohci device 0000:03:0e.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
>usb usb2: default language 0x0409
>usb usb2: udev 1, busnum 2, minor = 128
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 3.3.0-rc5 ehci_hcd
>usb usb2: SerialNumber: 0000:00:13.2
>usb usb2: usb_probe_device
>usb usb2: configuration #1 chosen from 1 choice
>usb usb2: adding 2-0:1.0 (config #1, interface 0)
>hub 2-0:1.0: usb_probe_interface
>hub 2-0:1.0: usb_probe_interface - got id
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 6 ports detected
>hub 2-0:1.0: standalone hub
>hub 2-0:1.0: no power switching (usb 1.0)
>hub 2-0:1.0: individual port over-current protection
>hub 2-0:1.0: power on to power good time: 20ms
>hub 2-0:1.0: local power source is good
>hub 2-0:1.0: trying to enable port power on non-switchable hub
>MCE: In-kernel MCE decoding enabled.
>EDAC MC: Ver: 2.1.0
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>ehci_hcd 0000:00:12.2: GetStatus port:1 status 001403 0  ACK POWER sig=k CSC CONNECT
>hub 1-0:1.0: port 1: status 0501 change 0001
>ehci_hcd 0000:00:12.2: GetStatus port:2 status 001803 0  ACK POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 2: status 0501 change 0001
>ehci_hcd 0000:00:12.2: GetStatus port:3 status 001803 0  ACK POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 3: status 0501 change 0001
>ehci_hcd 0000:00:12.2: GetStatus port:4 status 001803 0  ACK POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 4: status 0501 change 0001
>ehci_hcd 0000:00:12.2: GetStatus port:5 status 001803 0  ACK POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 5: status 0501 change 0001
>ehci_hcd 0000:00:12.2: GetStatus port:6 status 001803 0  ACK POWER sig=j CSC CONNECT
>hub 1-0:1.0: port 6: status 0501 change 0001
>AMD64 EDAC driver v3.4.0
>EDAC amd64: DRAM ECC disabled.
>EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
> Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
> (Note that use of the override may cause unknown side effects.)
>hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd: block sizes: ed 80 td 96
>ohci_hcd 0000:00:12.0: OHCI Host Controller
>ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:12.0: created debug files
>ohci_hcd 0000:00:12.0: supports USB remote wakeup
>ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
>hub 1-0:1.0: state 7 ports 6 chg 007e evt 0000
>hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:12.2: port 1 low speed --> companion
>ehci_hcd 0000:00:12.2: GetStatus port:1 status 003002 0  ACK POWER OWNER sig=se0 CSC
>hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
>ohci_hcd 0000:00:12.0: OHCI controller state
>ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers, rh state running
>ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3
>ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF
>ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH
>ohci_hcd 0000:00:12.0: hcca frame #0005
>ohci_hcd 0000:00:12.0: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
>ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00010301 CSC LSDA PPS CCS
>ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
>ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
>usb usb3: default language 0x0409
>usb usb3: udev 1, busnum 3, minor = 256
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: OHCI Host Controller
>usb usb3: Manufacturer: Linux 3.3.0-rc5 ohci_hcd
>usb usb3: SerialNumber: 0000:00:12.0
>usb usb3: usb_probe_device
>usb usb3: configuration #1 chosen from 1 choice
>usb usb3: adding 3-0:1.0 (config #1, interface 0)
>hub 3-0:1.0: usb_probe_interface
>hub 3-0:1.0: usb_probe_interface - got id
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>hub 3-0:1.0: standalone hub
>hub 3-0:1.0: no power switching (usb 1.0)
>hub 3-0:1.0: global over-current protection
>hub 3-0:1.0: power on to power good time: 4ms
>hub 3-0:1.0: local power source is good
>hub 3-0:1.0: no over-current condition exists
>hub 3-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:12.2: HS companion for 0000:00:12.0
>ohci_hcd 0000:00:12.1: OHCI Host Controller
>ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:12.1: created debug files
>ohci_hcd 0000:00:12.1: supports USB remote wakeup
>ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
>ehci_hcd 0000:00:12.2: port 2 high speed
>ehci_hcd 0000:00:12.2: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
>ohci_hcd 0000:00:12.1: OHCI controller state
>ohci_hcd 0000:00:12.1: OHCI 1.0, NO legacy support registers, rh state running
>ohci_hcd 0000:00:12.1: control 0x283 RWC HCFS=operational CBSR=3
>ohci_hcd 0000:00:12.1: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:12.1: intrstatus 0x00000004 SF
>ohci_hcd 0000:00:12.1: intrenable 0x8000005a MIE RHSC UE RD WDH
>ohci_hcd 0000:00:12.1: hcca frame #0005
>ohci_hcd 0000:00:12.1: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
>ohci_hcd 0000:00:12.1: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:12.1: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:12.1: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:00:12.1: roothub.portstatus [1] 0x00000100 PPS
>ohci_hcd 0000:00:12.1: roothub.portstatus [2] 0x00000100 PPS
>usb usb4: default language 0x0409
>usb usb4: udev 1, busnum 4, minor = 384
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: OHCI Host Controller
>usb usb4: Manufacturer: Linux 3.3.0-rc5 ohci_hcd
>usb usb4: SerialNumber: 0000:00:12.1
>usb usb4: usb_probe_device
>usb usb4: configuration #1 chosen from 1 choice
>usb usb4: adding 4-0:1.0 (config #1, interface 0)
>hub 4-0:1.0: usb_probe_interface
>hub 4-0:1.0: usb_probe_interface - got id
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>hub 4-0:1.0: standalone hub
>hub 4-0:1.0: no power switching (usb 1.0)
>hub 4-0:1.0: global over-current protection
>hub 4-0:1.0: power on to power good time: 4ms
>hub 4-0:1.0: local power source is good
>hub 4-0:1.0: no over-current condition exists
>hub 4-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:12.2: HS companion for 0000:00:12.1
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.0: created debug files
>ohci_hcd 0000:00:13.0: supports USB remote wakeup
>ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
>usb 1-2: new high-speed USB device number 3 using ehci_hcd
>ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
>hub 3-0:1.0: port 1: status 0301 change 0001
>ohci_hcd 0000:00:13.0: OHCI controller state
>ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers, rh state running
>ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3
>ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
>ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
>ohci_hcd 0000:00:13.0: hcca frame #0005
>ohci_hcd 0000:00:13.0: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
>ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
>ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
>usb usb5: default language 0x0409
>usb usb5: udev 1, busnum 5, minor = 512
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: OHCI Host Controller
>usb usb5: Manufacturer: Linux 3.3.0-rc5 ohci_hcd
>usb usb5: SerialNumber: 0000:00:13.0
>usb usb5: usb_probe_device
>usb usb5: configuration #1 chosen from 1 choice
>usb usb5: adding 5-0:1.0 (config #1, interface 0)
>hub 5-0:1.0: usb_probe_interface
>hub 5-0:1.0: usb_probe_interface - got id
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 3 ports detected
>hub 5-0:1.0: standalone hub
>hub 5-0:1.0: no power switching (usb 1.0)
>hub 5-0:1.0: global over-current protection
>hub 5-0:1.0: power on to power good time: 4ms
>hub 5-0:1.0: local power source is good
>hub 5-0:1.0: no over-current condition exists
>hub 5-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:13.2: HS companion for 0000:00:13.0
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
>ohci_hcd 0000:00:13.1: created debug files
>ohci_hcd 0000:00:13.1: supports USB remote wakeup
>ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
>ohci_hcd 0000:00:13.1: OHCI controller state
>ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers, rh state running
>ohci_hcd 0000:00:13.1: control 0x283 RWC HCFS=operational CBSR=3
>ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
>ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
>ohci_hcd 0000:00:13.1: hcca frame #0005
>ohci_hcd 0000:00:13.1: roothub.a 02000203 POTPGT=2 NPS NDP=3(3)
>ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
>ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS
>usb usb6: default language 0x0409
>usb usb6: udev 1, busnum 6, minor = 640
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: OHCI Host Controller
>usb usb6: Manufacturer: Linux 3.3.0-rc5 ohci_hcd
>usb usb6: SerialNumber: 0000:00:13.1
>usb usb6: usb_probe_device
>usb usb6: configuration #1 chosen from 1 choice
>usb usb6: adding 6-0:1.0 (config #1, interface 0)
>hub 6-0:1.0: usb_probe_interface
>hub 6-0:1.0: usb_probe_interface - got id
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 3 ports detected
>hub 6-0:1.0: standalone hub
>hub 6-0:1.0: no power switching (usb 1.0)
>hub 6-0:1.0: global over-current protection
>hub 6-0:1.0: power on to power good time: 4ms
>hub 6-0:1.0: local power source is good
>hub 6-0:1.0: no over-current condition exists
>hub 6-0:1.0: trying to enable port power on non-switchable hub
>ehci_hcd 0000:00:13.2: HS companion for 0000:00:13.1
>ohci_hcd 0000:00:14.5: OHCI Host Controller
>ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
>ohci_hcd 0000:00:14.5: created debug files
>ohci_hcd 0000:00:14.5: supports USB remote wakeup
>ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
>ohci_hcd 0000:00:14.5: OHCI controller state
>ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers, rh state running
>ohci_hcd 0000:00:14.5: control 0x283 RWC HCFS=operational CBSR=3
>ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0
>ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF
>ohci_hcd 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH
>ohci_hcd 0000:00:14.5: hcca frame #0005
>ohci_hcd 0000:00:14.5: roothub.a 02000202 POTPGT=2 NPS NDP=2(2)
>ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000
>ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE
>ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS
>ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS
>usb usb7: default language 0x0409
>usb usb7: udev 1, busnum 7, minor = 768
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: OHCI Host Controller
>usb usb7: Manufacturer: Linux 3.3.0-rc5 ohci_hcd
>usb usb7: SerialNumber: 0000:00:14.5
>usb usb7: usb_probe_device
>usb usb7: configuration #1 chosen from 1 choice
>usb usb7: adding 7-0:1.0 (config #1, interface 0)
>hub 7-0:1.0: usb_probe_interface
>hub 7-0:1.0: usb_probe_interface - got id
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 2 ports detected
>hub 7-0:1.0: standalone hub
>hub 7-0:1.0: no power switching (usb 1.0)
>hub 7-0:1.0: global over-current protection
>hub 7-0:1.0: power on to power good time: 4ms
>hub 7-0:1.0: local power source is good
>hub 7-0:1.0: no over-current condition exists
>hub 7-0:1.0: trying to enable port power on non-switchable hub
>ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120111/utaddress-251)
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>firewire_core: created device fw0: GUID 0072d7dc00001fd0, S400
>SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
>SP5100 TCO timer: mmio address 0xfec000f0 already in use
>ehci_hcd 0000:00:12.2: port 2 high speed
>ehci_hcd 0000:00:12.2: GetStatus port:2 status 001005 0  ACK POWER sig=se0 PE CONNECT
>Linux agpgart interface v0.103
>[drm] Initialized drm 1.1.0 20060810
>usb 1-2: default language 0x0409
>usb 1-2: udev 3, busnum 1, minor = 2
>usb 1-2: New USB device found, idVendor=03f0, idProduct=9b07
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-2: Product: Portable Drive
>usb 1-2: Manufacturer: Hewlett-Packard
>usb 1-2: SerialNumber: 63431047032318577663
>usb 1-2: usb_probe_device
>usb 1-2: configuration #1 chosen from 1 choice
>usb 1-2: adding 1-2:1.0 (config #1, interface 0)
>hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>[drm] initializing kernel modesetting (CAYMAN 0x1002:0x6719 0x1682:0x3126).
>[drm] register mmio base: 0xFDFC0000
>[drm] register mmio size: 131072
>ATOM BIOS: CAYMAN
>radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
>radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
>ehci_hcd 0000:00:12.2: port 3 high speed
>ehci_hcd 0000:00:12.2: GetStatus port:3 status 001005 0  ACK POWER sig=se0 PE CONNECT
>[drm] Detected VRAM RAM=1024M, BAR=256M
>[drm] RAM width 256bits DDR
>[TTM] Zone  kernel: Available graphics memory: 4084478 kiB.
>[TTM] Zone   dma32: Available graphics memory: 2097152 kiB.
>[TTM] Initializing pool allocator.
>[TTM] Initializing DMA pool allocator.
>[drm] radeon: 1024M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>radeon 0000:01:00.0: irq 43 for MSI/MSI-X
>radeon 0000:01:00.0: radeon: using MSI.
>[drm] radeon: irq initialized.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] radeon: ib pool ready.
>[drm] Loading CAYMAN Microcode
>usb 1-3: new high-speed USB device number 4 using ehci_hcd
>ehci_hcd 0000:00:12.2: port 3 high speed
>ehci_hcd 0000:00:12.2: GetStatus port:3 status 001005 0  ACK POWER sig=se0 PE CONNECT
>usb 1-3: default language 0x0409
>usb 1-3: udev 4, busnum 1, minor = 3
>usb 1-3: New USB device found, idVendor=0bda, idProduct=8172
>usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-3: SerialNumber: 00e04c000001
>usb 1-3: usb_probe_device
>usb 1-3: configuration #1 chosen from 1 choice
>usb 1-3: adding 1-3:1.0 (config #1, interface 0)
>hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:12.2: port 4 full speed --> companion
>ehci_hcd 0000:00:12.2: GetStatus port:4 status 003801 0  ACK POWER OWNER sig=j CONNECT
>hub 1-0:1.0: port 4 not reset yet, waiting 50ms
>ehci_hcd 0000:00:12.2: GetStatus port:4 status 003002 0  ACK POWER OWNER sig=se0 CSC
>hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:12.2: port 5 full speed --> companion
>ehci_hcd 0000:00:12.2: GetStatus port:5 status 003801 0  ACK POWER OWNER sig=j CONNECT
>hub 1-0:1.0: port 5 not reset yet, waiting 50ms
>ehci_hcd 0000:00:12.2: GetStatus port:5 status 003002 0  ACK POWER OWNER sig=se0 CSC
>hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
>ehci_hcd 0000:00:12.2: port 6 high speed
>ehci_hcd 0000:00:12.2: GetStatus port:6 status 001005 0  ACK POWER sig=se0 PE CONNECT
>usb 1-6: new high-speed USB device number 7 using ehci_hcd
>ehci_hcd 0000:00:12.2: port 6 high speed
>ehci_hcd 0000:00:12.2: GetStatus port:6 status 001005 0  ACK POWER sig=se0 PE CONNECT
>usb 1-6: skipped 3 descriptors after interface
>usb 1-6: skipped 2 descriptors after interface
>usb 1-6: skipped 1 descriptor after endpoint
>usb 1-6: skipped 1 descriptor after interface
>usb 1-6: default language 0x0409
>usb 1-6: udev 7, busnum 1, minor = 6
>usb 1-6: New USB device found, idVendor=05ac, idProduct=129e
>usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-6: Product: iPod
>usb 1-6: Manufacturer: Apple Inc.
>usb 1-6: SerialNumber: 169724406bc954d64e4c0cb7fb096700fe533c79
>usb 1-6: usb_probe_device
>usb 1-6: configuration #1 chosen from 4 choices
>usb 1-6: adding 1-6:1.0 (config #1, interface 0)
>hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0020
>hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0006
>ohci_hcd 0000:00:12.1: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
>hub 4-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
>hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
>ohci_hcd 0000:00:12.1: port[0] reset timeout, stat 00000111
>ohci_hcd 0000:00:12.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
>[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>radeon 0000:01:00.0: WB enabled
>[drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff88021eff5c00
>[drm] fence driver on ring 1 use gpu addr 0x40000c04 and cpu addr 0xffff88021eff5c04
>[drm] fence driver on ring 2 use gpu addr 0x40000c08 and cpu addr 0xffff88021eff5c08
>[drm] ring test on 0 succeeded in 2 usecs
>[drm] ib test on ring 0 succeeded in 0 usecs
>usb 4-1: new full-speed USB device number 2 using ohci_hcd
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   DisplayPort
>[drm]   HPD5
>[drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_UNIPHY2
>[drm] Connector 1:
>[drm]   DisplayPort
>[drm]   HPD4
>[drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
>[drm]   Encoders:
>[drm]     DFP2: INTERNAL_UNIPHY2
>[drm] Connector 2:
>[drm]   HDMI-A
>[drm]   HPD6
>[drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
>[drm]   Encoders:
>[drm]     DFP3: INTERNAL_UNIPHY1
>[drm] Connector 3:
>[drm]   DVI-D
>[drm]   HPD1
>[drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
>[drm]   Encoders:
>[drm]     DFP4: INTERNAL_UNIPHY1
>[drm] Connector 4:
>[drm]   DVI-I
>[drm]   HPD3
>[drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
>[drm]   Encoders:
>[drm]     DFP5: INTERNAL_UNIPHY
>[drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[drm] Internal thermal controller with fan control
>[drm] radeon: power management initialized
>ohci_hcd 0000:00:12.1: port[0] reset timeout, stat 00000113
>ohci_hcd 0000:00:12.1: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS
>[drm] fb mappable at 0xD0942000
>[drm] vram apper at 0xD0000000
>[drm] size 5242880
>[drm] fb depth is 24
>[drm]    pitch is 5120
>fb0: radeondrmfb frame buffer device
>drm: registered panic notifier
>[drm] Initialized radeon 2.13.0 20080528 for 0000:01:00.0 on minor 0
>usb 4-1: ep0 maxpacket = 8
>hub 2-0:1.0: hub_suspend
>usb usb2: bus auto-suspend, wakeup 1
>ehci_hcd 0000:00:13.2: suspend root hub
>usb 4-1: skipped 4 descriptors after interface
>usb 4-1: skipped 2 descriptors after interface
>usb 4-1: skipped 1 descriptor after endpoint
>usb 4-1: skipped 2 descriptors after interface
>usb 4-1: skipped 1 descriptor after endpoint
>usb 4-1: skipped 2 descriptors after interface
>usb 4-1: skipped 1 descriptor after endpoint
>usb 4-1: skipped 2 descriptors after interface
>usb 4-1: skipped 1 descriptor after endpoint
>usb 4-1: udev 2, busnum 4, minor = 385
>usb 4-1: New USB device found, idVendor=046d, idProduct=08b0
>usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>usb 4-1: usb_probe_device
>usb 4-1: configuration #1 chosen from 1 choice
>usb 4-1: adding 4-1:1.0 (config #1, interface 0)
>usb 4-1: adding 4-1:1.1 (config #1, interface 1)
>usb 4-1: adding 4-1:1.2 (config #1, interface 2)
>ohci_hcd 0000:00:12.1: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS
>hub 4-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
>hda_intel: position_fix set to 1 for device 1458:a022
>ALSA hda_intel.c:1572 Enable sync_write for stable communication
>hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>ohci_hcd 0000:00:12.1: port[1] reset timeout, stat 00000111
>ohci_hcd 0000:00:12.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
>Console: switching to colour frame buffer device 160x64
>hda_codec: ALC889A: BIOS auto-probing.
>ALSA patch_realtek.c:1253 SKU: Nid=0x1d sku_cfg=0x4005e601
>ALSA patch_realtek.c:1255 SKU: port_connectivity=0x1
>ALSA patch_realtek.c:1256 SKU: enable_pcbeep=0x0
>ALSA patch_realtek.c:1257 SKU: check_sum=0x00000005
>ALSA patch_realtek.c:1258 SKU: customization=0x000000e6
>ALSA patch_realtek.c:1259 SKU: external_amp=0x0
>ALSA patch_realtek.c:1260 SKU: platform_type=0x0
>ALSA patch_realtek.c:1261 SKU: swap=0x0
>ALSA patch_realtek.c:1262 SKU: override=0x1
>ALSA hda_codec.c:4923 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
>ALSA hda_codec.c:4927    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>ALSA hda_codec.c:4931    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>ALSA hda_codec.c:4932    mono: mono_out=0x0
>ALSA hda_codec.c:4935    dig-out=0x1e/0x0
>ALSA hda_codec.c:4936    inputs:
>ALSA hda_codec.c:4940  Rear Mic=0x18
>ALSA hda_codec.c:4940  Front Mic=0x19
>ALSA hda_codec.c:4940  Line=0x1a
>ALSA hda_codec.c:4942 
>ALSA hda_codec.c:4944    dig-in=0x1f
>ALSA patch_realtek.c:1316 realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
>ALSA patch_realtek.c:1332 realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0885
>usb 4-2: new full-speed USB device number 3 using ohci_hcd
>input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input2
>input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
>input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
>input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
>input: HDA ATI SB Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
>input: HDA ATI SB Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
>input: HDA ATI SB Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
>input: HDA ATI SB Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
>ALSA hda_intel.c:2538 Using LPIB position fix
>snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
>ALSA hda_intel.c:1572 Enable sync_write for stable communication
>ohci_hcd 0000:00:12.1: port[1] reset timeout, stat 00000113
>ohci_hcd 0000:00:12.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
>usb 4-2: ep0 maxpacket = 8
>usb 4-2: skipped 1 descriptor after interface
>usb 4-2: skipped 1 descriptor after interface
>usb 4-2: skipped 1 descriptor after interface
>usb 4-2: default language 0x0409
>usb 4-2: udev 3, busnum 4, minor = 386
>usb 4-2: New USB device found, idVendor=046d, idProduct=c52b
>usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 4-2: Product: USB Receiver
>usb 4-2: Manufacturer: Logitech
>usb 4-2: usb_probe_device
>usb 4-2: configuration #1 chosen from 1 choice
>usb 4-2: adding 4-2:1.0 (config #1, interface 0)
>usb 4-2: adding 4-2:1.1 (config #1, interface 1)
>usb 4-2: adding 4-2:1.2 (config #1, interface 2)
>hub 3-0:1.0: state 7 ports 3 chg 0002 evt 0000
>hub 3-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
>HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
>input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
>ohci_hcd 0000:00:12.0: port[0] reset timeout, stat 00000311
>ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
>usb 3-1: new low-speed USB device number 2 using ohci_hcd
>ohci_hcd 0000:00:12.0: port[0] reset timeout, stat 00000313
>ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
>usb 3-1: skipped 1 descriptor after interface
>usb 3-1: default language 0x0409
>usb 3-1: udev 2, busnum 3, minor = 257
>usb 3-1: New USB device found, idVendor=051d, idProduct=0002
>usb 3-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>usb 3-1: Product: Back-UPS ES 550 FW:843.K2 .D USB FW:K2 
>usb 3-1: Manufacturer: APC
>usb 3-1: SerialNumber: 4B1116P54888  
>usb 3-1: usb_probe_device
>usb 3-1: configuration #1 chosen from 1 choice
>usb 3-1: adding 3-1:1.0 (config #1, interface 0)
>hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000
>hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000
>hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
>hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0004
>hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0002
>usb usb2: usb auto-resume
>ehci_hcd 0000:00:13.2: resume root hub
>hub 2-0:1.0: hub_resume
>hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
>usb 1-6: unregistering interface 1-6:1.0
>usb 1-6: usb_disable_device nuking non-ep0 URBs
>usb 1-6: adding 1-6:4.0 (config #4, interface 0)
>usb 1-6: adding 1-6:4.1 (config #4, interface 1)
>usb 1-6: adding 1-6:4.2 (config #4, interface 2)
>uas 1-2:1.0: usb_probe_interface
>uas 1-2:1.0: usb_probe_interface - got id
>usbcore: registered new interface driver uas
>Initializing USB Mass Storage driver...
>usb-storage 1-2:1.0: usb_probe_interface
>usb-storage 1-2:1.0: usb_probe_interface - got id
>scsi8 : usb-storage 1-2:1.0
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usbhid 4-2:1.0: usb_probe_interface
>usbhid 4-2:1.0: usb_probe_interface - got id
>usbhid 4-2:1.1: usb_probe_interface
>usbhid 4-2:1.1: usb_probe_interface - got id
>usbhid 4-2:1.2: usb_probe_interface
>usbhid 4-2:1.2: usb_probe_interface - got id
>usbhid 3-1:1.0: usb_probe_interface
>usbhid 3-1:1.0: usb_probe_interface - got id
>usbhid 3-1:1.0: looking for a minor, starting at 0
>generic-usb 0003:051D:0002.0004: hiddev0,hidraw0: USB HID v1.10 Device [APC Back-UPS ES 550 FW:843.K2 .D USB FW:K2 ] on usb-0000:00:12.0-1/input0
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>Linux media interface: v0.10
>Linux video capture interface: v2.00
>usbhid 4-2:1.2: looking for a minor, starting at 0
>logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.1-2/input2
>input: Logitech Unifying Device. Wireless PID:1024 as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/input/input11
>logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1024] on usb-0000:00:12.1-2:1
>input: Logitech Unifying Device. Wireless PID:2011 as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/input/input12
>logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:2011] on usb-0000:00:12.1-2:2
>Adding 1461876k swap on /dev/sda7.  Priority:-1 extents:1 across:1461876k 
>r8712u: module is from the staging directory, the quality is unknown, you have been warned.
>r8712u 1-3:1.0: usb_probe_interface
>r8712u 1-3:1.0: usb_probe_interface - got id
>r8712u: DriverVersion: v7_0.20100831
>r8712u: register rtl8712_netdev_ops to netdev_ops
>r8712u: USB_SPEED_HIGH with 4 endpoints
>r8712u: Boot from EFUSE: Autoload OK
>Philips webcam 4-1:1.0: usb_probe_interface
>Philips webcam 4-1:1.0: usb_probe_interface - got id
>pwc: Logitech QuickCam Pro 3000 USB webcam detected.
>scsi 8:0:0:0: Direct-Access     HP       Portable Drive   1008 PQ: 0 ANSI: 6
>sd 8:0:0:0: Attached scsi generic sg3 type 0
>sd 8:0:0:0: [sdc] 976769024 512-byte logical blocks: (500 GB/465 GiB)
>sd 8:0:0:0: [sdc] Write Protect is off
>sd 8:0:0:0: [sdc] Mode Sense: 47 00 10 08
>sd 8:0:0:0: [sdc] No Caching mode page present
>sd 8:0:0:0: [sdc] Assuming drive cache: write through
>sd 8:0:0:0: [sdc] No Caching mode page present
>sd 8:0:0:0: [sdc] Assuming drive cache: write through
>pwc: Registered as video0.
>input: PWC snapshot button as /devices/pci0000:00/0000:00:12.1/usb4/4-1/input/input13
>Philips webcam 4-1:1.1: usb_probe_interface
>Philips webcam 4-1:1.1: usb_probe_interface - got id
>snd-usb-audio 4-1:1.1: usb_probe_interface
>snd-usb-audio 4-1:1.1: usb_probe_interface - got id
>ALSA mixer.c:846 2:1: cannot get min/max values for control 2 (id 2)
>ALSA mixer.c:846 2:1: cannot get min/max values for control 2 (id 2)
>usbcore: registered new interface driver snd-usb-audio
>usbcore: registered new interface driver Philips webcam
> sdc: sdc1 sdc2
>sd 8:0:0:0: [sdc] No Caching mode page present
>sd 8:0:0:0: [sdc] Assuming drive cache: write through
>sd 8:0:0:0: [sdc] Attached SCSI disk
>r8712u: CustomerID = 0x0000
>r8712u: MAC Address from efuse = 00:0d:09:a1:09:d9
>r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
>usbcore: registered new interface driver r8712u
>hub 5-0:1.0: hub_suspend
>usb usb5: bus auto-suspend, wakeup 1
>hub 2-0:1.0: hub_suspend
>ohci_hcd 0000:00:13.0: suspend root hub
>usb usb2: bus auto-suspend, wakeup 1
>ehci_hcd 0000:00:13.2: suspend root hub
>hub 6-0:1.0: hub_suspend
>usb usb6: bus auto-suspend, wakeup 1
>ohci_hcd 0000:00:13.1: suspend root hub
>hub 7-0:1.0: hub_suspend
>usb usb7: bus auto-suspend, wakeup 1
>ohci_hcd 0000:00:14.5: suspend root hub
>EXT4-fs (sda3): re-mounted. Opts: (null)
>EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
>EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
>NET: Registered protocol family 10
>Bluetooth: Core ver 2.16
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: SCO socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM ver 1.11
>init: failsafe main process (960) killed by TERM signal
>init: apport pre-start process (1084) terminated with status 1
>init: apport post-stop process (1144) terminated with status 1
>init: lightdm main process (1093) killed by TERM signal
>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>Bluetooth: BNEP filters: protocol multicast
>r8169 0000:02:00.0: eth0: link down
>r8169 0000:02:00.0: eth0: link down
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>r8169 0000:02:00.0: eth0: link up
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>NET: Registered protocol family 17
>EXT4-fs (sda3): re-mounted. Opts: commit=0
>EXT4-fs (sda2): re-mounted. Opts: commit=0
>EXT4-fs (sda5): re-mounted. Opts: commit=0
>usb usb7: usb auto-resume
>ohci_hcd 0000:00:14.5: resume root hub
>init: plymouth-stop pre-start process (1631) terminated with status 1
>hub 7-0:1.0: hub_resume
>hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
>usb usb6: usb auto-resume
>ohci_hcd 0000:00:13.1: resume root hub
>hub 6-0:1.0: hub_resume
>hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000
>usb usb5: usb auto-resume
>ohci_hcd 0000:00:13.0: resume root hub
>hub 5-0:1.0: hub_resume
>hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000
>usb usb2: usb auto-resume
>ehci_hcd 0000:00:13.2: resume root hub
>hub 2-0:1.0: hub_resume
>hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
>init: mediatomb main process (1665) terminated with status 1
>init: mediatomb main process ended, respawning
>init: mediatomb main process (1679) terminated with status 1
>init: mediatomb main process ended, respawning
>init: mediatomb main process (1681) terminated with status 1
>init: mediatomb main process ended, respawning
>init: mediatomb main process (1683) terminated with status 1
>init: mediatomb main process ended, respawning
>init: mediatomb main process (1685) terminated with status 1
>init: mediatomb main process ended, respawning
>init: mediatomb main process (1687) terminated with status 1
>init: mediatomb main process ended, respawning
>init: mediatomb main process (1689) terminated with status 1
>init: mediatomb main process ended, respawning
>init: mediatomb main process (1691) terminated with status 1
>init: mediatomb main process ended, respawning
>init: mediatomb main process (1693) terminated with status 1
>init: mediatomb main process ended, respawning
>init: mediatomb main process (1696) terminated with status 1
>init: mediatomb main process ended, respawning
>init: mediatomb main process (1698) terminated with status 1
>init: mediatomb respawning too fast, stopped
>at-spi-registry[1701]: segfault at 18 ip 00007f39049175f1 sp 00007ffff14fb950 error 4 in libgconf-2.so.4.1.5[7f3904900000+2d000]
>EXT4-fs (sda3): re-mounted. Opts: commit=0
>EXT4-fs (sda2): re-mounted. Opts: commit=0
>EXT4-fs (sda5): re-mounted. Opts: commit=0
>eth0: no IPv6 routers present
>EXT4-fs (sdc2): warning: maximal mount count reached, running e2fsck is recommended
>EXT4-fs (sdc2): recovery complete
>EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
>radeon 0000:01:00.0: GPU lockup CP stall for more than 10000msec
>GPU lockup (waiting for 0x00000C25 last fence id 0x00000C23)
>radeon 0000:01:00.0: GPU softreset 
>radeon 0000:01:00.0:   GRBM_STATUS=0xF5702828
>radeon 0000:01:00.0:   GRBM_STATUS_SE0=0xFC000005
>radeon 0000:01:00.0:   GRBM_STATUS_SE1=0xFC000005
>radeon 0000:01:00.0:   SRBM_STATUS=0x20020FC0
>radeon 0000:01:00.0:   VM_CONTEXT0_PROTECTION_FAULT_ADDR   0x00000000
>radeon 0000:01:00.0:   VM_CONTEXT0_PROTECTION_FAULT_STATUS 0x00000000
>radeon 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_ADDR   0x00001968
>radeon 0000:01:00.0:   VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0206700C
>radeon 0000:01:00.0: Wait for MC idle timedout !
>radeon 0000:01:00.0:   GRBM_SOFT_RESET=0x0000DF7B
>radeon 0000:01:00.0:   GRBM_STATUS=0x80103828
>radeon 0000:01:00.0:   GRBM_STATUS_SE0=0x04000007
>radeon 0000:01:00.0:   GRBM_STATUS_SE1=0x04000007
>radeon 0000:01:00.0:   SRBM_STATUS=0x20020FC0
>radeon 0000:01:00.0: GPU reset succeed
>radeon 0000:01:00.0: Wait for MC idle timedout !
>radeon 0000:01:00.0: Wait for MC idle timedout !
>[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>radeon 0000:01:00.0: WB enabled
>[drm] fence driver on ring 0 use gpu addr 0x40000c00 and cpu addr 0xffff88021eff5c00
>[drm] fence driver on ring 1 use gpu addr 0x40000c04 and cpu addr 0xffff88021eff5c04
>[drm] fence driver on ring 2 use gpu addr 0x40000c08 and cpu addr 0xffff88021eff5c08
>[drm:r600_ring_test] *ERROR* radeon: ring 0 test failed (scratch(0x8500)=0xCAFEDEAD)
>[drm:cayman_resume] *ERROR* cayman startup failed on resume

Actions: View

Attachments on bug 45018: 55888 | 55889 | 55912 | 55913 | 57178 | 57234 | 57235 | 57237 | 57645 | 57740 | 58846 | 60582 | 62618 | 62619 | 64052 | 64053 | 64585 | 65013 | 65014 | 65051 | 65093 | 65095 | 65096 | 65097 | 65098 | 65101 | 65102

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.