Attachment 66517 Details for Bug 50227 – drm.debug=6 After patches applied

drm.debug=6 After patches applied

drm.debug=6 After patches applied (text/plain), 245.95 KB, created by brettcornwall on 2012-09-02 21:16:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: brettcornwall

Created: 2012-09-02 21:16:21 UTC

Size: 245.95 KB

patch

obsolete

>[  116.186077] ehci_hcd 0000:00:1d.7: PME# disabled
>[  116.186095] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>[  116.186099] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
>[  116.186104] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
>[  116.186114] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>[  116.186196] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
>[  116.186292] ath9k 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  116.186853] PM: early resume of devices complete after 1.591 msecs
>[  116.186958] i915 0000:00:02.0: setting latency timer to 64
>[  116.187290] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[  116.187296] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[  116.187321] usb usb3: root hub lost power or was reset
>[  116.187338] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
>[  116.187344] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[  116.187372] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[  116.187378] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>[  116.187425] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[  116.187477] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  116.187483] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[  116.187507] usb usb4: root hub lost power or was reset
>[  116.187520] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[  116.187526] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[  116.187549] usb usb5: root hub lost power or was reset
>[  116.187562] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
>[  116.187568] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[  116.187592] usb usb6: root hub lost power or was reset
>[  116.187604] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[  116.187610] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[  116.187633] usb usb7: root hub lost power or was reset
>[  116.187648] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  116.187654] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[  116.187677] pci 0000:00:1e.0: setting latency timer to 64
>[  116.187693] ahci 0000:00:1f.2: setting latency timer to 64
>[  116.204466] sd 0:0:0:0: [sda] Starting disk
>[  116.268964] [drm:intel_opregion_setup], graphic opregion physical addr: 0xbba8c018
>[  116.269032] [drm:intel_opregion_setup], Public ACPI methods supported
>[  116.269034] [drm:intel_opregion_setup], SWSCI supported
>[  116.269035] [drm:intel_opregion_setup], ASLE supported
>[  116.269071] [drm:init_status_page], render ring hws offset: 0x00000000
>[  116.269249] [drm:init_ring_common], render ring head not reset to zero ctl 00000000 head 00001000 tail 00000000 start 00001000
>[  116.269263] [drm:init_status_page], bsd ring hws offset: 0x00021000
>[  116.269459] [drm:drm_crtc_helper_set_mode], [CRTC:4]
>[  116.269466] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  116.269470] [drm:i915_get_crtc_scanoutpos], trying to get scanoutpos for disabled pipe B
>[  116.269474] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  116.269480] [drm:intel_update_fbc], 
>[  116.269482] [drm:intel_update_fbc], fbc set to per-chip default
>[  116.269483] [drm:intel_update_fbc], fbc disabled per module param
>[  116.269486] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  116.269489] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  116.269494] [drm:i9xx_crtc_mode_set], using SSC reference clock of 96 MHz
>[  116.269519] [drm:i9xx_crtc_mode_set], Mode for pipe B:
>[  116.269521] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  116.269824] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[  116.308063] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  116.308067] [drm:intel_update_fbc], 
>[  116.308069] [drm:intel_update_fbc], fbc set to per-chip default
>[  116.308070] [drm:intel_update_fbc], fbc disabled per module param
>[  116.324093] PM: resume of drv:hub dev:4-0:1.0 complete after 119.729 msecs
>[  116.324100] PM: resume of drv: dev:ep_00 complete after 119.728 msecs
>[  116.324106] PM: resume of drv: dev:ep_81 complete after 119.741 msecs
>[  116.324110] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  116.324113] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  116.324118] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1366x768]
>[  116.324121] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  116.324123] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  116.324139] PM: resume of drv:hub dev:5-0:1.0 complete after 119.749 msecs
>[  116.324147] PM: resume of drv: dev:ep_00 complete after 119.747 msecs
>[  116.324153] PM: resume of drv:hub dev:6-0:1.0 complete after 119.738 msecs
>[  116.324161] PM: resume of drv: dev:ep_00 complete after 119.735 msecs
>[  116.324167] PM: resume of drv:hub dev:7-0:1.0 complete after 119.727 msecs
>[  116.324175] PM: resume of drv: dev:ep_00 complete after 119.724 msecs
>[  116.324181] PM: resume of drv: dev:ep_81 complete after 119.784 msecs
>[  116.324187] PM: resume of drv: dev:ep_81 complete after 119.764 msecs
>[  116.324193] PM: resume of drv: dev:ep_81 complete after 119.745 msecs
>[  116.324632] [drm:intel_update_fbc], 
>[  116.324633] [drm:intel_update_fbc], fbc set to per-chip default
>[  116.324635] [drm:intel_update_fbc], fbc disabled per module param
>[  116.324641] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  116.324646] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  116.324656] [drm:intel_opregion_asle_intr], non asle set request??
>[  116.324801] [drm:drm_crtc_helper_set_config], 
>[  116.324803] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  116.324811] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  116.327441] PM: resume of drv:i915 dev:0000:00:02.0 complete after 140.492 msecs
>[  116.336059] PM: resume of drv: dev:ep_00 complete after 131.738 msecs
>[  116.336069] PM: resume of drv:hub dev:2-0:1.0 complete after 131.760 msecs
>[  116.336078] PM: resume of drv: dev:ep_81 complete after 131.761 msecs
>[  116.428056] PM: resume of drv:hub dev:3-0:1.0 complete after 223.719 msecs
>[  116.428072] PM: resume of drv: dev:ep_81 complete after 223.733 msecs
>[  116.428081] PM: resume of drv: dev:ep_00 complete after 223.734 msecs
>[  116.448068] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[  116.666734] PM: resume of drv:uvcvideo dev:2-4:1.1 complete after 462.215 msecs
>[  116.666741] PM: resume of drv:uvcvideo dev:2-4:1.0 complete after 462.235 msecs
>[  116.666745] PM: resume of drv: dev:ep_00 complete after 462.220 msecs
>[  116.666757] PM: resume of drv: dev:ep_82 complete after 462.244 msecs
>[  116.752052] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  116.755971] ata2.00: configured for UDMA/100
>[  116.856074] usb 3-1: reset low-speed USB device number 2 using uhci_hcd
>[  117.163361] PM: resume of drv: dev:ep_00 complete after 958.812 msecs
>[  117.163372] PM: resume of drv:usbhid dev:3-1:1.0 complete after 958.831 msecs
>[  117.163391] PM: resume of drv: dev:ep_81 complete after 958.846 msecs
>[  117.596082] PM: resume of drv:battery dev:PNP0C0A:00 complete after 1409.036 msecs
>[  119.488053] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[  119.520627] ata1.00: configured for UDMA/133
>[  119.547875] PM: resume of drv:sd dev:0:0:0:0 complete after 3343.411 msecs
>[  119.547886] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1931.620 msecs
>[  119.547898] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3343.407 msecs
>[  119.554503] PM: resume of devices complete after 3367.590 msecs
>[  119.554689] PM: resume devices took 3.368 seconds
>[  119.554733] PM: Finishing wakeup.
>[  119.554734] Restarting tasks ... done.
>[  119.664070] usb 2-5: new high-speed USB device number 6 using ehci_hcd
>[  119.822665] scsi7 : usb-storage 2-5:1.0
>[  120.160211] video LNXVIDEO:01: Restoring backlight state
>[  120.160498] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[  120.160569] [drm:drm_mode_setcrtc], [CRTC:4]
>[  120.160576] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[  120.160579] [drm:drm_crtc_helper_set_config], 
>[  120.160581] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:26] #connectors=1 (x y) (0 0)
>[  120.160593] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  120.160602] [drm:i9xx_update_plane], Writing base 031E9000 00000000 0 0 5632
>[  120.160606] [drm:intel_update_fbc], 
>[  120.160608] [drm:intel_update_fbc], fbc set to per-chip default
>[  120.160610] [drm:intel_update_fbc], fbc disabled per module param
>[  120.176159] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  120.176166] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  120.176182] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  120.176185] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  120.176191] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  120.176466] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  120.176472] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  120.184129] [drm:intel_crt_detect], CRT not detected via hotplug
>[  120.184138] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  120.184152] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  120.184155] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  120.192055] [drm:intel_crt_detect], CRT not detected via hotplug
>[  120.192064] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  120.192090] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  120.192093] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  120.192596] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  120.200560] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  120.208542] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  120.216044] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  120.216049] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  120.216060] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  120.216062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  120.216563] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  120.224543] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  120.232542] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  120.240045] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  120.240049] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  120.241529] [drm:intel_crtc_cursor_set], 
>[  120.243840] [drm:drm_mode_addfb], [FB:27]
>[  120.249396] [drm:intel_update_fbc], 
>[  120.249403] [drm:intel_update_fbc], fbc set to per-chip default
>[  120.249405] [drm:intel_update_fbc], fbc disabled per module param
>[  120.278310] [drm:drm_mode_addfb], [FB:26]
>[  120.297550] [drm:intel_update_fbc], 
>[  120.297557] [drm:intel_update_fbc], fbc set to per-chip default
>[  120.297560] [drm:intel_update_fbc], fbc disabled per module param
>[  120.823974] scsi 7:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
>[  120.831350] sd 7:0:0:0: Attached scsi generic sg2 type 0
>[  120.902624] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  120.908577] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  120.916546] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  120.928058] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  120.940023] [drm:intel_crt_detect], CRT not detected via hotplug
>[  120.964721] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[  120.973840] atl1c 0000:05:00.0: irq 46 for MSI/MSI-X
>[  121.033237] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[  122.321875] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  122.321883] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  122.321899] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  122.321903] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  122.321909] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  122.322130] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  122.322134] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  122.336077] [drm:intel_crt_detect], CRT not detected via hotplug
>[  122.336087] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  122.336199] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  122.336205] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  122.344039] [drm:intel_crt_detect], CRT not detected via hotplug
>[  122.344046] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  122.344114] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  122.344120] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  122.344628] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  122.352534] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  122.360557] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  122.368054] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  122.368063] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  122.368141] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  122.368147] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  122.368651] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  122.376556] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  122.384566] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  122.392037] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  122.392046] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  122.399599] [drm:intel_crtc_cursor_set], 
>[  122.399628] [drm:intel_crtc_cursor_set], cursor off
>[  122.482392] [drm:intel_crtc_cursor_set], 
>[  122.498546] [drm:drm_mode_addfb], [FB:27]
>[  122.512431] [drm:intel_update_fbc], 
>[  122.512436] [drm:intel_update_fbc], fbc set to per-chip default
>[  122.512439] [drm:intel_update_fbc], fbc disabled per module param
>[  125.671617] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  125.671630] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  125.671654] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  125.671660] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  125.671673] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  125.672087] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  125.672097] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  125.684049] [drm:intel_crt_detect], CRT not detected via hotplug
>[  125.684057] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  125.684068] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  125.684074] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  125.692035] [drm:intel_crt_detect], CRT not detected via hotplug
>[  125.692045] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  125.692077] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  125.692083] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  125.692589] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  125.700536] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  125.708558] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  125.716039] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  125.716053] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  125.716083] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  125.716089] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  125.716596] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  125.724570] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  125.732602] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  125.740063] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  125.740070] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  125.741486] [drm:intel_crtc_cursor_set], 
>[  125.741490] [drm:intel_crtc_cursor_set], cursor off
>[  125.829842] [drm:intel_crtc_cursor_set], 
>[  125.838796] [drm:drm_mode_addfb], [FB:26]
>[  125.841562] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  125.841570] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  125.841581] [drm:intel_opregion_asle_intr], non asle set request??
>[  125.849652] [drm:intel_update_fbc], 
>[  125.849655] [drm:intel_update_fbc], fbc set to per-chip default
>[  125.849657] [drm:intel_update_fbc], fbc disabled per module param
>[  126.112057] [drm:intel_update_fbc], 
>[  126.112063] [drm:intel_update_fbc], fbc set to per-chip default
>[  126.112068] [drm:intel_update_fbc], fbc disabled per module param
>[  126.112074] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  126.112079] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  126.217464] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  126.217474] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  126.240084] [drm:intel_update_fbc], 
>[  126.240091] [drm:intel_update_fbc], fbc set to per-chip default
>[  126.240095] [drm:intel_update_fbc], fbc disabled per module param
>[  126.464056] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  126.464062] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  126.464068] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  126.464095] [drm:intel_opregion_asle_intr], non asle set request??
>[  126.464154] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  126.464160] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  126.464182] [drm:intel_opregion_asle_intr], non asle set request??
>[  126.464242] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  126.464248] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  126.464258] [drm:intel_opregion_asle_intr], non asle set request??
>[  126.496059] [drm:intel_update_fbc], 
>[  126.496066] [drm:intel_update_fbc], fbc set to per-chip default
>[  126.496070] [drm:intel_update_fbc], fbc disabled per module param
>[  126.496076] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  126.496081] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  126.504071] [drm:intel_crt_detect], CRT not detected via hotplug
>[  126.504080] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[  126.504588] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  126.512557] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  126.520567] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  126.528027] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  126.528036] [drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated from 2 to 2
>[  127.927656] sd 7:0:0:0: [sdb] Attached SCSI removable disk
>[  131.488404] usb 2-5: USB disconnect, device number 6
>[  132.815791] PM: Syncing filesystems ... done.
>[  132.818851] PM: Preparing system for mem sleep
>[  132.818993] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  132.818999] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  132.840067] [drm:intel_update_fbc], 
>[  132.840073] [drm:intel_update_fbc], fbc set to per-chip default
>[  132.840075] [drm:intel_update_fbc], fbc disabled per module param
>[  132.848037] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  132.848044] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  132.848047] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  132.848058] [drm:intel_opregion_asle_intr], non asle set request??
>[  132.848118] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  132.848122] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  132.848128] [drm:intel_opregion_asle_intr], non asle set request??
>[  132.848178] [drm:intel_crtc_cursor_set], 
>[  132.848180] [drm:intel_crtc_cursor_set], cursor off
>[  133.276324] [drm:drm_crtc_helper_set_config], 
>[  133.276329] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[  133.276338] [drm:drm_crtc_helper_set_config], 
>[  133.276340] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  133.276350] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  133.276362] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  133.276367] [drm:intel_update_fbc], 
>[  133.276369] [drm:intel_update_fbc], fbc set to per-chip default
>[  133.276370] [drm:intel_update_fbc], fbc disabled per module param
>[  133.292041] [drm:drm_crtc_helper_set_config], 
>[  133.292044] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  133.292055] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  133.296895] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[  133.312108] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[  133.328108] PM: Entering mem sleep
>[  133.328146] Suspending console(s) (use no_console_suspend to debug)
>[  133.329137] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  133.329316] sd 0:0:0:0: [sda] Stopping disk
>[  133.470621] PM: suspend of drv:psmouse dev:serio1 complete after 141.414 msecs
>[  133.484375] uhci_hcd 0000:00:1a.0: PCI INT A disabled
>[  133.484795] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe A
>[  133.500076] ehci_hcd 0000:00:1d.7: PCI INT A disabled
>[  133.520077] uhci_hcd 0000:00:1d.1: PCI INT B disabled
>[  133.520095] uhci_hcd 0000:00:1d.2: PCI INT D disabled
>[  133.520121] uhci_hcd 0000:00:1d.0: PCI INT A disabled
>[  133.520139] uhci_hcd 0000:00:1d.3: PCI INT C disabled
>[  133.548067] ehci_hcd 0000:00:1a.7: PCI INT D disabled
>[  133.792486] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
>[  133.808052] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 323.709 msecs
>[  133.908812] PM: suspend of drv:sd dev:0:0:0:0 complete after 579.681 msecs
>[  133.908833] PM: suspend of drv:scsi dev:target0:0:0 complete after 579.701 msecs
>[  133.908854] PM: suspend of drv:scsi dev:host0 complete after 425.202 msecs
>[  133.924075] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 439.798 msecs
>[  133.924095] PM: suspend of drv: dev:pci0000:00 complete after 439.710 msecs
>[  133.924101] PM: suspend of devices complete after 595.642 msecs
>[  133.924103] PM: suspend devices took 0.596 seconds
>[  133.956807] ehci_hcd 0000:00:1d.7: PME# enabled
>[  133.956817] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[  133.972822] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[  133.973772] ehci_hcd 0000:00:1a.7: PME# enabled
>[  133.973776] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[  133.988305] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[  133.989133] PM: late suspend of devices complete after 65.027 msecs
>[  133.989268] ACPI: Preparing to enter system sleep state S3
>[  133.989421] PM: Saving platform NVS memory
>[  133.989907] Disabling non-boot CPUs ...
>[  134.092152] CPU 1 is now offline
>[  134.092654] ACPI: Low-level resume complete
>[  134.092654] PM: Restoring platform NVS memory
>[  134.092654] CPU0: Thermal monitoring handled by SMI
>[  134.092654] Enabling non-boot CPUs ...
>[  134.092654] Booting Node 0 Processor 1 APIC 0x1
>[  134.092654] smpboot cpu 1: start_ip = 99000
>[  133.991608] Calibrating delay loop (skipped) already calibrated this CPU
>[  134.120058] NMI watchdog enabled, takes one hw-pmu counter.
>[  134.127195] CPU1 is up
>[  134.128649] ACPI: Waking up from system sleep state S3
>[  134.131437] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
>[  134.131443] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
>[  134.131499] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  134.131525] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[  134.131564] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[  134.131582] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[  134.131587] ehci_hcd 0000:00:1a.7: PME# disabled
>[  134.131605] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[  134.131623] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  134.131629] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[  134.131657] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[  134.131667] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd131d041)
>[  134.131672] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd660d570)
>[  134.131684] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100001, writing 0x100407)
>[  134.131727] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[  134.131738] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xd231d141)
>[  134.131743] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd560d460)
>[  134.131754] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[  134.131797] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[  134.131808] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xd331d241)
>[  134.131812] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xd450d350)
>[  134.131824] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[  134.131881] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  134.131903] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[  134.131932] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  134.131969] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  134.132035] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  134.132081] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[  134.132100] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[  134.132105] ehci_hcd 0000:00:1d.7: PME# disabled
>[  134.132122] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>[  134.132127] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
>[  134.132131] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
>[  134.132142] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>[  134.132223] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
>[  134.132319] ath9k 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  134.132881] PM: early resume of devices complete after 1.616 msecs
>[  134.133002] i915 0000:00:02.0: setting latency timer to 64
>[  134.133020] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[  134.133027] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[  134.133052] usb usb3: root hub lost power or was reset
>[  134.133186] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
>[  134.133222] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[  134.133251] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[  134.133256] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>[  134.133303] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[  134.133355] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  134.133361] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[  134.133385] usb usb4: root hub lost power or was reset
>[  134.133398] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[  134.133403] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[  134.133427] usb usb5: root hub lost power or was reset
>[  134.133440] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
>[  134.133446] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[  134.133470] usb usb6: root hub lost power or was reset
>[  134.133482] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[  134.133488] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[  134.133512] usb usb7: root hub lost power or was reset
>[  134.133526] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  134.133532] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[  134.133554] pci 0000:00:1e.0: setting latency timer to 64
>[  134.133572] ahci 0000:00:1f.2: setting latency timer to 64
>[  134.150560] sd 0:0:0:0: [sda] Starting disk
>[  134.215147] [drm:intel_opregion_setup], graphic opregion physical addr: 0xbba8c018
>[  134.215211] [drm:intel_opregion_setup], Public ACPI methods supported
>[  134.215213] [drm:intel_opregion_setup], SWSCI supported
>[  134.215214] [drm:intel_opregion_setup], ASLE supported
>[  134.215251] [drm:init_status_page], render ring hws offset: 0x00000000
>[  134.215431] [drm:init_ring_common], render ring head not reset to zero ctl 00000000 head 00001000 tail 00000000 start 00001000
>[  134.215444] [drm:init_status_page], bsd ring hws offset: 0x00021000
>[  134.215641] [drm:drm_crtc_helper_set_mode], [CRTC:4]
>[  134.215647] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  134.215651] [drm:i915_get_crtc_scanoutpos], trying to get scanoutpos for disabled pipe B
>[  134.215656] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  134.215661] [drm:intel_update_fbc], 
>[  134.215663] [drm:intel_update_fbc], fbc set to per-chip default
>[  134.215665] [drm:intel_update_fbc], fbc disabled per module param
>[  134.215668] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  134.215670] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  134.215675] [drm:i9xx_crtc_mode_set], using SSC reference clock of 96 MHz
>[  134.215701] [drm:i9xx_crtc_mode_set], Mode for pipe B:
>[  134.215703] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  134.216018] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[  134.256064] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  134.256068] [drm:intel_update_fbc], 
>[  134.256069] [drm:intel_update_fbc], fbc set to per-chip default
>[  134.256071] [drm:intel_update_fbc], fbc disabled per module param
>[  134.268091] PM: resume of drv:hub dev:5-0:1.0 complete after 117.586 msecs
>[  134.268099] PM: resume of drv: dev:ep_00 complete after 117.587 msecs
>[  134.268105] PM: resume of drv: dev:ep_81 complete after 117.597 msecs
>[  134.268129] PM: resume of drv: dev:ep_00 complete after 117.598 msecs
>[  134.268140] PM: resume of drv:hub dev:4-0:1.0 complete after 117.658 msecs
>[  134.268144] PM: resume of drv:hub dev:6-0:1.0 complete after 117.617 msecs
>[  134.268150] PM: resume of drv:hub dev:7-0:1.0 complete after 117.607 msecs
>[  134.268153] PM: resume of drv: dev:ep_00 complete after 117.667 msecs
>[  134.268159] PM: resume of drv: dev:ep_00 complete after 117.608 msecs
>[  134.268162] PM: resume of drv: dev:ep_81 complete after 117.632 msecs
>[  134.268167] PM: resume of drv: dev:ep_81 complete after 117.686 msecs
>[  134.268172] PM: resume of drv: dev:ep_81 complete after 117.625 msecs
>[  134.272061] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  134.272064] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  134.272070] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1366x768]
>[  134.272077] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  134.272080] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  134.272563] [drm:intel_update_fbc], 
>[  134.272564] [drm:intel_update_fbc], fbc set to per-chip default
>[  134.272566] [drm:intel_update_fbc], fbc disabled per module param
>[  134.272570] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  134.272573] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  134.272591] [drm:intel_opregion_asle_intr], non asle set request??
>[  134.272731] [drm:drm_crtc_helper_set_config], 
>[  134.272733] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  134.272741] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  134.275495] PM: resume of drv:i915 dev:0000:00:02.0 complete after 142.501 msecs
>[  134.280070] PM: resume of drv:hub dev:2-0:1.0 complete after 129.798 msecs
>[  134.280077] PM: resume of drv: dev:ep_00 complete after 129.764 msecs
>[  134.280080] PM: resume of drv: dev:ep_81 complete after 129.804 msecs
>[  134.372056] PM: resume of drv:hub dev:3-0:1.0 complete after 221.615 msecs
>[  134.372072] PM: resume of drv: dev:ep_81 complete after 221.616 msecs
>[  134.372082] PM: resume of drv: dev:ep_00 complete after 221.617 msecs
>[  134.392050] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[  134.610825] PM: resume of drv:uvcvideo dev:2-4:1.1 complete after 460.206 msecs
>[  134.610833] PM: resume of drv:uvcvideo dev:2-4:1.0 complete after 460.230 msecs
>[  134.610837] PM: resume of drv: dev:ep_00 complete after 460.212 msecs
>[  134.610844] PM: resume of drv: dev:ep_82 complete after 460.235 msecs
>[  134.696056] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  134.699768] ata2.00: configured for UDMA/100
>[  134.800074] usb 3-1: reset low-speed USB device number 2 using uhci_hcd
>[  135.107409] PM: resume of drv: dev:ep_00 complete after 956.760 msecs
>[  135.107419] PM: resume of drv:usbhid dev:3-1:1.0 complete after 956.778 msecs
>[  135.107439] PM: resume of drv: dev:ep_81 complete after 956.794 msecs
>[  135.552087] PM: resume of drv:battery dev:PNP0C0A:00 complete after 1401.869 msecs
>[  137.488073] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[  137.518269] ata1.00: configured for UDMA/133
>[  137.545405] PM: resume of drv:sd dev:0:0:0:0 complete after 3394.845 msecs
>[  137.545415] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1974.899 msecs
>[  137.545428] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3394.836 msecs
>[  137.552121] PM: resume of devices complete after 3419.201 msecs
>[  137.552312] PM: resume devices took 3.420 seconds
>[  137.552352] PM: Finishing wakeup.
>[  137.552354] Restarting tasks ... done.
>[  137.664051] usb 2-5: new high-speed USB device number 7 using ehci_hcd
>[  137.822637] scsi8 : usb-storage 2-5:1.0
>[  138.184245] video LNXVIDEO:01: Restoring backlight state
>[  138.184575] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[  138.184645] [drm:drm_mode_setcrtc], [CRTC:4]
>[  138.184653] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[  138.184656] [drm:drm_crtc_helper_set_config], 
>[  138.184658] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:26] #connectors=1 (x y) (0 0)
>[  138.184669] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  138.184678] [drm:i9xx_update_plane], Writing base 08835000 00000000 0 0 5632
>[  138.184683] [drm:intel_update_fbc], 
>[  138.184685] [drm:intel_update_fbc], fbc set to per-chip default
>[  138.184687] [drm:intel_update_fbc], fbc disabled per module param
>[  138.200143] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  138.200150] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  138.200166] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  138.200169] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  138.200175] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  138.200417] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  138.200423] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  138.208088] [drm:intel_crt_detect], CRT not detected via hotplug
>[  138.208094] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  138.208108] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  138.208112] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  138.216103] [drm:intel_crt_detect], CRT not detected via hotplug
>[  138.216110] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  138.216136] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  138.216139] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  138.216643] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  138.224587] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  138.232576] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  138.240091] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  138.240100] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  138.240114] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  138.240118] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  138.240624] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  138.248544] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  138.256584] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  138.264047] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  138.264056] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  138.264629] [drm:intel_crtc_cursor_set], 
>[  138.269207] [drm:drm_mode_addfb], [FB:28]
>[  138.275845] [drm:intel_update_fbc], 
>[  138.275852] [drm:intel_update_fbc], fbc set to per-chip default
>[  138.275854] [drm:intel_update_fbc], fbc disabled per module param
>[  138.321622] [drm:drm_mode_addfb], [FB:26]
>[  138.340089] [drm:intel_update_fbc], 
>[  138.340096] [drm:intel_update_fbc], fbc set to per-chip default
>[  138.340099] [drm:intel_update_fbc], fbc disabled per module param
>[  138.808571] [drm:drm_mode_addfb], [FB:28]
>[  138.821428] [drm:intel_update_fbc], 
>[  138.821437] [drm:intel_update_fbc], fbc set to per-chip default
>[  138.821441] [drm:intel_update_fbc], fbc disabled per module param
>[  138.822499] scsi 8:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
>[  138.832826] sd 8:0:0:0: Attached scsi generic sg2 type 0
>[  138.889445] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  138.898331] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  138.910196] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  138.916030] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  138.924877] [drm:intel_crt_detect], CRT not detected via hotplug
>[  138.952340] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[  138.959555] atl1c 0000:05:00.0: irq 46 for MSI/MSI-X
>[  139.017214] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[  140.264628] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  140.264635] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  140.264651] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  140.264655] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  140.264663] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  140.264908] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  140.264913] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  140.276042] [drm:intel_crt_detect], CRT not detected via hotplug
>[  140.276049] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  140.276062] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  140.276065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  140.284039] [drm:intel_crt_detect], CRT not detected via hotplug
>[  140.284046] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  140.284067] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  140.284073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  140.284579] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  140.292539] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  140.300557] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  140.308055] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  140.308064] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  140.308088] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  140.308094] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  140.308598] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  140.316555] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  140.324570] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  140.332037] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  140.332046] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  140.336873] [drm:intel_crtc_cursor_set], 
>[  140.336882] [drm:intel_crtc_cursor_set], cursor off
>[  140.425211] [drm:intel_crtc_cursor_set], 
>[  140.444926] [drm:drm_mode_addfb], [FB:26]
>[  140.459754] [drm:intel_update_fbc], 
>[  140.459761] [drm:intel_update_fbc], fbc set to per-chip default
>[  140.459763] [drm:intel_update_fbc], fbc disabled per module param
>[  143.051376] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  143.051388] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  143.051412] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  143.051418] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  143.051431] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  143.051817] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  143.051824] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  143.060036] [drm:intel_crt_detect], CRT not detected via hotplug
>[  143.060045] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  143.060058] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  143.060063] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  143.071394] [drm:intel_crt_detect], CRT not detected via hotplug
>[  143.071402] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  143.071437] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  143.071444] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  143.071950] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  143.076560] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  143.084567] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  143.092035] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  143.092047] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  143.092068] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  143.092074] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  143.092579] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  143.100587] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  143.112549] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  143.120071] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  143.120082] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  143.122372] [drm:intel_crtc_cursor_set], 
>[  143.122379] [drm:intel_crtc_cursor_set], cursor off
>[  143.210376] [drm:intel_crtc_cursor_set], 
>[  143.212957] [drm:drm_mode_addfb], [FB:28]
>[  143.214608] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  143.214617] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  143.214628] [drm:intel_opregion_asle_intr], non asle set request??
>[  143.234225] [drm:intel_update_fbc], 
>[  143.234233] [drm:intel_update_fbc], fbc set to per-chip default
>[  143.234237] [drm:intel_update_fbc], fbc disabled per module param
>[  143.492055] [drm:intel_update_fbc], 
>[  143.492061] [drm:intel_update_fbc], fbc set to per-chip default
>[  143.492066] [drm:intel_update_fbc], fbc disabled per module param
>[  143.492071] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  143.492076] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  143.599796] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  143.599804] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  143.628082] [drm:intel_update_fbc], 
>[  143.628088] [drm:intel_update_fbc], fbc set to per-chip default
>[  143.628090] [drm:intel_update_fbc], fbc disabled per module param
>[  143.848060] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  143.848066] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  143.848070] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  143.848079] [drm:intel_opregion_asle_intr], non asle set request??
>[  143.848151] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  143.848155] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  143.848160] [drm:intel_opregion_asle_intr], non asle set request??
>[  143.848247] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  143.848255] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  143.848261] [drm:intel_opregion_asle_intr], non asle set request??
>[  143.880058] [drm:intel_update_fbc], 
>[  143.880063] [drm:intel_update_fbc], fbc set to per-chip default
>[  143.880066] [drm:intel_update_fbc], fbc disabled per module param
>[  143.880069] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  143.880072] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  144.296062] [drm:intel_crt_detect], CRT not detected via hotplug
>[  144.296068] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[  144.296573] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  144.304546] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  144.312548] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  144.320032] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  144.320037] [drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated from 2 to 2
>[  145.925366] sd 8:0:0:0: [sdb] Attached SCSI removable disk
>[  149.458732] [drm:drm_crtc_helper_set_mode], [CRTC:4]
>[  149.458748] [drm:i9xx_crtc_mode_set], using SSC reference clock of 96 MHz
>[  149.458799] [drm:i9xx_crtc_mode_set], Mode for pipe B:
>[  149.458804] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  149.459112] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[  149.496039] [drm:i9xx_update_plane], Writing base 031E9000 00000000 0 0 5632
>[  149.496052] [drm:intel_update_fbc], 
>[  149.496056] [drm:intel_update_fbc], fbc set to per-chip default
>[  149.496061] [drm:intel_update_fbc], fbc disabled per module param
>[  149.512040] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  149.512049] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  149.512062] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1366x768]
>[  149.512069] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  149.512074] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  149.512558] [drm:intel_update_fbc], 
>[  149.512561] [drm:intel_update_fbc], fbc set to per-chip default
>[  149.512565] [drm:intel_update_fbc], fbc disabled per module param
>[  149.520038] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  149.520045] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  149.520051] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  149.520064] [drm:intel_opregion_asle_intr], non asle set request??
>[  149.520075] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  149.520080] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  149.520088] [drm:intel_opregion_asle_intr], non asle set request??
>[  149.544059] [drm:intel_update_fbc], 
>[  149.544064] [drm:intel_update_fbc], fbc set to per-chip default
>[  149.544068] [drm:intel_update_fbc], fbc disabled per module param
>[  149.544074] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  149.544080] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  149.544343] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  149.544350] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  149.564075] [drm:intel_update_fbc], 
>[  149.564082] [drm:intel_update_fbc], fbc set to per-chip default
>[  149.564086] [drm:intel_update_fbc], fbc disabled per module param
>[  149.601375] usb 2-5: USB disconnect, device number 7
>[  149.964073] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  149.964080] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  149.964092] [drm:intel_opregion_asle_intr], non asle set request??
>[  149.964132] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  149.964136] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  149.964143] [drm:intel_opregion_asle_intr], non asle set request??
>[  149.986775] [drm:drm_mode_addfb], [FB:26]
>[  150.010296] [drm:drm_mode_addfb], [FB:28]
>[  150.010391] [drm:intel_update_fbc], 
>[  150.010395] [drm:intel_update_fbc], fbc set to per-chip default
>[  150.010397] [drm:intel_update_fbc], fbc disabled per module param
>[  150.026247] [drm:intel_update_fbc], 
>[  150.026253] [drm:intel_update_fbc], fbc set to per-chip default
>[  150.026256] [drm:intel_update_fbc], fbc disabled per module param
>[  150.026324] [drm:drm_mode_addfb], [FB:26]
>[  150.042388] [drm:drm_mode_addfb], [FB:28]
>[  150.042482] [drm:intel_update_fbc], 
>[  150.042486] [drm:intel_update_fbc], fbc set to per-chip default
>[  150.042488] [drm:intel_update_fbc], fbc disabled per module param
>[  150.058448] [drm:drm_mode_addfb], [FB:26]
>[  150.058540] [drm:intel_update_fbc], 
>[  150.058544] [drm:intel_update_fbc], fbc set to per-chip default
>[  150.058546] [drm:intel_update_fbc], fbc disabled per module param
>[  150.074469] [drm:drm_mode_addfb], [FB:28]
>[  150.074540] [drm:intel_update_fbc], 
>[  150.074543] [drm:intel_update_fbc], fbc set to per-chip default
>[  150.074545] [drm:intel_update_fbc], fbc disabled per module param
>[  150.090527] [drm:drm_mode_addfb], [FB:26]
>[  150.090620] [drm:intel_update_fbc], 
>[  150.090624] [drm:intel_update_fbc], fbc set to per-chip default
>[  150.090626] [drm:intel_update_fbc], fbc disabled per module param
>[  150.106470] [drm:intel_update_fbc], 
>[  150.106477] [drm:intel_update_fbc], fbc set to per-chip default
>[  150.106480] [drm:intel_update_fbc], fbc disabled per module param
>[  151.176233] PM: Syncing filesystems ... done.
>[  151.183631] PM: Preparing system for mem sleep
>[  151.183720] [drm:intel_crtc_cursor_set], 
>[  151.183722] [drm:intel_crtc_cursor_set], cursor off
>[  151.532274] [drm:drm_crtc_helper_set_config], 
>[  151.532278] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[  151.532286] [drm:drm_crtc_helper_set_config], 
>[  151.532287] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  151.532296] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  151.532306] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  151.532311] [drm:intel_update_fbc], 
>[  151.532312] [drm:intel_update_fbc], fbc set to per-chip default
>[  151.532314] [drm:intel_update_fbc], fbc disabled per module param
>[  151.588049] [drm:intel_wait_for_vblank], vblank wait timed out
>[  151.588055] [drm:drm_crtc_helper_set_config], 
>[  151.588057] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  151.588064] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  151.588170] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[  151.604114] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[  151.620108] PM: Entering mem sleep
>[  151.620148] Suspending console(s) (use no_console_suspend to debug)
>[  151.621145] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  151.621339] sd 0:0:0:0: [sda] Stopping disk
>[  151.760164] PM: suspend of drv:psmouse dev:serio1 complete after 138.946 msecs
>[  151.774676] uhci_hcd 0000:00:1a.0: PCI INT A disabled
>[  151.775091] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe A
>[  151.788073] ehci_hcd 0000:00:1d.7: PCI INT A disabled
>[  151.812078] uhci_hcd 0000:00:1d.2: PCI INT D disabled
>[  151.812091] uhci_hcd 0000:00:1d.1: PCI INT B disabled
>[  151.812133] uhci_hcd 0000:00:1d.0: PCI INT A disabled
>[  151.812141] uhci_hcd 0000:00:1d.3: PCI INT C disabled
>[  151.840053] ehci_hcd 0000:00:1a.7: PCI INT D disabled
>[  152.080460] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
>[  152.096051] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 321.401 msecs
>[  152.198359] PM: suspend of drv:sd dev:0:0:0:0 complete after 577.220 msecs
>[  152.198385] PM: suspend of drv:scsi dev:target0:0:0 complete after 577.244 msecs
>[  152.198406] PM: suspend of drv:scsi dev:host0 complete after 424.412 msecs
>[  152.212069] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 437.468 msecs
>[  152.212085] PM: suspend of drv: dev:pci0000:00 complete after 437.067 msecs
>[  152.212104] PM: suspend of devices complete after 591.651 msecs
>[  152.212106] PM: suspend devices took 0.592 seconds
>[  152.244798] ehci_hcd 0000:00:1d.7: PME# enabled
>[  152.244808] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[  152.260809] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[  152.261766] ehci_hcd 0000:00:1a.7: PME# enabled
>[  152.261770] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[  152.276316] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[  152.277157] PM: late suspend of devices complete after 65.047 msecs
>[  152.277290] ACPI: Preparing to enter system sleep state S3
>[  152.277434] PM: Saving platform NVS memory
>[  152.277928] Disabling non-boot CPUs ...
>[  152.380166] CPU 1 is now offline
>[  152.380655] ACPI: Low-level resume complete
>[  152.380655] PM: Restoring platform NVS memory
>[  152.380655] CPU0: Thermal monitoring handled by SMI
>[  152.380655] Enabling non-boot CPUs ...
>[  152.380655] Booting Node 0 Processor 1 APIC 0x1
>[  152.380655] smpboot cpu 1: start_ip = 99000
>[  152.279618] Calibrating delay loop (skipped) already calibrated this CPU
>[  152.406637] NMI watchdog enabled, takes one hw-pmu counter.
>[  152.411018] CPU1 is up
>[  152.412482] ACPI: Waking up from system sleep state S3
>[  152.415273] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
>[  152.415279] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
>[  152.415335] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  152.415361] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[  152.415400] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[  152.415419] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[  152.415424] ehci_hcd 0000:00:1a.7: PME# disabled
>[  152.415442] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[  152.415460] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  152.415466] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[  152.415494] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[  152.415505] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd131d041)
>[  152.415510] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd660d570)
>[  152.415522] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100001, writing 0x100407)
>[  152.415566] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[  152.415576] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xd231d141)
>[  152.415581] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd560d460)
>[  152.415593] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[  152.415636] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[  152.415646] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xd331d241)
>[  152.415651] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xd450d350)
>[  152.415662] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[  152.415719] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  152.415742] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[  152.415771] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  152.415809] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  152.415845] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  152.415892] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[  152.415910] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[  152.415915] ehci_hcd 0000:00:1d.7: PME# disabled
>[  152.415933] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>[  152.415938] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
>[  152.415942] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
>[  152.415953] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>[  152.416057] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
>[  152.416155] ath9k 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  152.416718] PM: early resume of devices complete after 1.617 msecs
>[  152.416822] i915 0000:00:02.0: setting latency timer to 64
>[  152.417013] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[  152.417019] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[  152.417045] usb usb3: root hub lost power or was reset
>[  152.417179] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
>[  152.417185] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[  152.417215] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[  152.417221] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>[  152.417267] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[  152.417321] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  152.417327] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[  152.417351] usb usb4: root hub lost power or was reset
>[  152.417364] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[  152.417370] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[  152.417394] usb usb5: root hub lost power or was reset
>[  152.417407] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
>[  152.417413] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[  152.417437] usb usb6: root hub lost power or was reset
>[  152.417450] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[  152.417455] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[  152.417479] usb usb7: root hub lost power or was reset
>[  152.417494] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  152.417499] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[  152.417522] pci 0000:00:1e.0: setting latency timer to 64
>[  152.417538] ahci 0000:00:1f.2: setting latency timer to 64
>[  152.434321] sd 0:0:0:0: [sda] Starting disk
>[  152.498985] [drm:intel_opregion_setup], graphic opregion physical addr: 0xbba8c018
>[  152.499051] [drm:intel_opregion_setup], Public ACPI methods supported
>[  152.499053] [drm:intel_opregion_setup], SWSCI supported
>[  152.499055] [drm:intel_opregion_setup], ASLE supported
>[  152.499090] [drm:init_status_page], render ring hws offset: 0x00000000
>[  152.499269] [drm:init_ring_common], render ring head not reset to zero ctl 00000000 head 00001000 tail 00000000 start 00001000
>[  152.499282] [drm:init_status_page], bsd ring hws offset: 0x00021000
>[  152.499482] [drm:drm_crtc_helper_set_mode], [CRTC:4]
>[  152.499489] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  152.499493] [drm:i915_get_crtc_scanoutpos], trying to get scanoutpos for disabled pipe B
>[  152.499497] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  152.499503] [drm:intel_update_fbc], 
>[  152.499504] [drm:intel_update_fbc], fbc set to per-chip default
>[  152.499506] [drm:intel_update_fbc], fbc disabled per module param
>[  152.499509] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  152.499511] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  152.499517] [drm:i9xx_crtc_mode_set], using SSC reference clock of 96 MHz
>[  152.499542] [drm:i9xx_crtc_mode_set], Mode for pipe B:
>[  152.499545] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  152.499847] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[  152.536064] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  152.536068] [drm:intel_update_fbc], 
>[  152.536070] [drm:intel_update_fbc], fbc set to per-chip default
>[  152.536071] [drm:intel_update_fbc], fbc disabled per module param
>[  152.552095] PM: resume of drv:hub dev:4-0:1.0 complete after 117.874 msecs
>[  152.552103] PM: resume of drv: dev:ep_00 complete after 117.872 msecs
>[  152.552108] PM: resume of drv: dev:ep_81 complete after 117.887 msecs
>[  152.552113] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  152.552116] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  152.552123] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1366x768]
>[  152.552126] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  152.552128] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  152.552139] PM: resume of drv:hub dev:5-0:1.0 complete after 117.893 msecs
>[  152.552147] PM: resume of drv: dev:ep_00 complete after 117.890 msecs
>[  152.552153] PM: resume of drv:hub dev:6-0:1.0 complete after 117.882 msecs
>[  152.552161] PM: resume of drv: dev:ep_00 complete after 117.879 msecs
>[  152.552167] PM: resume of drv:hub dev:7-0:1.0 complete after 117.871 msecs
>[  152.552175] PM: resume of drv: dev:ep_00 complete after 117.867 msecs
>[  152.552182] PM: resume of drv: dev:ep_81 complete after 117.929 msecs
>[  152.552188] PM: resume of drv: dev:ep_81 complete after 117.909 msecs
>[  152.552194] PM: resume of drv: dev:ep_81 complete after 117.890 msecs
>[  152.552634] [drm:intel_update_fbc], 
>[  152.552635] [drm:intel_update_fbc], fbc set to per-chip default
>[  152.552637] [drm:intel_update_fbc], fbc disabled per module param
>[  152.552643] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  152.552646] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  152.552658] [drm:intel_opregion_asle_intr], non asle set request??
>[  152.552801] [drm:drm_crtc_helper_set_config], 
>[  152.552803] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  152.552811] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  152.555442] PM: resume of drv:i915 dev:0000:00:02.0 complete after 138.628 msecs
>[  152.564058] PM: resume of drv: dev:ep_00 complete after 129.880 msecs
>[  152.564068] PM: resume of drv:hub dev:2-0:1.0 complete after 129.902 msecs
>[  152.564077] PM: resume of drv: dev:ep_81 complete after 129.903 msecs
>[  152.656062] PM: resume of drv:hub dev:3-0:1.0 complete after 221.869 msecs
>[  152.656080] PM: resume of drv: dev:ep_81 complete after 221.881 msecs
>[  152.656085] PM: resume of drv: dev:ep_00 complete after 221.882 msecs
>[  152.676049] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[  152.894968] PM: resume of drv:uvcvideo dev:2-4:1.1 complete after 460.592 msecs
>[  152.894975] PM: resume of drv:uvcvideo dev:2-4:1.0 complete after 460.613 msecs
>[  152.894978] PM: resume of drv: dev:ep_00 complete after 460.598 msecs
>[  152.894986] PM: resume of drv: dev:ep_82 complete after 460.617 msecs
>[  152.980073] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  152.983778] ata2.00: configured for UDMA/100
>[  153.084062] usb 3-1: reset low-speed USB device number 2 using uhci_hcd
>[  153.391219] PM: resume of drv: dev:ep_00 complete after 956.815 msecs
>[  153.391229] PM: resume of drv:usbhid dev:3-1:1.0 complete after 956.832 msecs
>[  153.391248] PM: resume of drv: dev:ep_81 complete after 956.847 msecs
>[  153.828087] PM: resume of drv:battery dev:PNP0C0A:00 complete after 1411.176 msecs
>[  155.660074] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[  155.691112] ata1.00: configured for UDMA/133
>[  155.718326] PM: resume of drv:sd dev:0:0:0:0 complete after 3284.006 msecs
>[  155.718337] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1870.341 msecs
>[  155.718349] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3284.002 msecs
>[  155.725090] PM: resume of devices complete after 3308.314 msecs
>[  155.725273] PM: resume devices took 3.308 seconds
>[  155.725311] PM: Finishing wakeup.
>[  155.725312] Restarting tasks ... done.
>[  155.836067] usb 2-5: new high-speed USB device number 8 using ehci_hcd
>[  156.235385] scsi9 : usb-storage 2-5:1.0
>[  156.328216] video LNXVIDEO:01: Restoring backlight state
>[  156.328552] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[  156.328621] [drm:drm_mode_setcrtc], [CRTC:4]
>[  156.328633] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[  156.328636] [drm:drm_crtc_helper_set_config], 
>[  156.328638] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:26] #connectors=1 (x y) (0 0)
>[  156.328649] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  156.328658] [drm:i9xx_update_plane], Writing base 08835000 00000000 0 0 5632
>[  156.328662] [drm:intel_update_fbc], 
>[  156.328664] [drm:intel_update_fbc], fbc set to per-chip default
>[  156.328667] [drm:intel_update_fbc], fbc disabled per module param
>[  156.336133] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  156.336139] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  156.336154] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  156.336157] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  156.336162] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  156.336380] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  156.336386] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  156.344097] [drm:intel_crt_detect], CRT not detected via hotplug
>[  156.344105] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  156.344121] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  156.344124] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  156.352041] [drm:intel_crt_detect], CRT not detected via hotplug
>[  156.352049] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  156.352074] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  156.352078] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  156.352581] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  156.360560] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  156.368535] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  156.376081] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  156.376089] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  156.376103] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  156.376106] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  156.376611] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  156.384593] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  156.392571] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  156.400072] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  156.400080] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  156.400518] [drm:intel_crtc_cursor_set], 
>[  156.405356] [drm:drm_mode_addfb], [FB:29]
>[  156.415254] [drm:intel_update_fbc], 
>[  156.415261] [drm:intel_update_fbc], fbc set to per-chip default
>[  156.415263] [drm:intel_update_fbc], fbc disabled per module param
>[  156.435722] [drm:drm_mode_addfb], [FB:26]
>[  156.447455] [drm:intel_update_fbc], 
>[  156.447461] [drm:intel_update_fbc], fbc set to per-chip default
>[  156.447463] [drm:intel_update_fbc], fbc disabled per module param
>[  156.991489] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  156.996545] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  157.004583] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  157.014498] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  157.029764] [drm:intel_crt_detect], CRT not detected via hotplug
>[  157.044814] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  157.044822] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  157.044836] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  157.044839] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  157.044845] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  157.045863] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  157.045870] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  157.055107] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[  157.060393] [drm:intel_crt_detect], CRT not detected via hotplug
>[  157.060401] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  157.060415] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  157.060419] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  157.062471] atl1c 0000:05:00.0: irq 46 for MSI/MSI-X
>[  157.068050] [drm:intel_crt_detect], CRT not detected via hotplug
>[  157.068058] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  157.068100] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  157.068104] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  157.068608] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  157.076562] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  157.084552] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  157.096051] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  157.096063] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  157.096087] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  157.096091] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  157.096592] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  157.104579] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  157.112560] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  157.120074] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  157.120079] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  157.120831] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[  157.125774] [drm:intel_crtc_cursor_set], 
>[  157.125780] [drm:intel_crtc_cursor_set], cursor off
>[  157.238747] scsi 9:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
>[  157.242063] sd 9:0:0:0: Attached scsi generic sg2 type 0
>[  157.283521] [drm:intel_crtc_cursor_set], 
>[  157.289280] [drm:drm_mode_addfb], [FB:29]
>[  157.313937] [drm:intel_update_fbc], 
>[  157.313942] [drm:intel_update_fbc], fbc set to per-chip default
>[  157.313945] [drm:intel_update_fbc], fbc disabled per module param
>[  158.461263] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  158.461271] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  158.461289] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  158.461292] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  158.461298] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  158.461523] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  158.461528] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  158.476045] [drm:intel_crt_detect], CRT not detected via hotplug
>[  158.476055] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  158.476114] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  158.476120] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  158.484038] [drm:intel_crt_detect], CRT not detected via hotplug
>[  158.484045] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  158.484091] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  158.484097] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  158.484603] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  158.492546] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  158.500555] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  158.508054] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  158.508062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  158.508102] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  158.508109] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  158.508613] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  158.516567] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  158.524532] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  158.532038] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  158.532047] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  158.536610] [drm:intel_crtc_cursor_set], 
>[  158.536619] [drm:intel_crtc_cursor_set], cursor off
>[  158.620436] [drm:intel_crtc_cursor_set], 
>[  158.630175] [drm:drm_mode_addfb], [FB:26]
>[  158.645717] [drm:intel_update_fbc], 
>[  158.645722] [drm:intel_update_fbc], fbc set to per-chip default
>[  158.645725] [drm:intel_update_fbc], fbc disabled per module param
>[  160.664274] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  160.664287] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  160.664310] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  160.664316] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  160.664329] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  160.664708] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  160.664715] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  160.676038] [drm:intel_crt_detect], CRT not detected via hotplug
>[  160.676050] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  160.676063] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  160.676068] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  160.684036] [drm:intel_crt_detect], CRT not detected via hotplug
>[  160.684043] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  160.684065] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  160.684071] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  160.684577] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  160.692536] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  160.700563] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  160.708061] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  160.708071] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  160.708095] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  160.708101] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  160.708606] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  160.716562] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  160.728658] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  160.736085] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  160.736096] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  160.738419] [drm:intel_crtc_cursor_set], 
>[  160.738425] [drm:intel_crtc_cursor_set], cursor off
>[  160.848203] [drm:intel_crtc_cursor_set], 
>[  160.850574] [drm:drm_mode_addfb], [FB:29]
>[  160.852524] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  160.852535] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  160.852549] [drm:intel_opregion_asle_intr], non asle set request??
>[  160.876192] [drm:intel_update_fbc], 
>[  160.876200] [drm:intel_update_fbc], fbc set to per-chip default
>[  160.876204] [drm:intel_update_fbc], fbc disabled per module param
>[  161.124058] [drm:intel_update_fbc], 
>[  161.124065] [drm:intel_update_fbc], fbc set to per-chip default
>[  161.124070] [drm:intel_update_fbc], fbc disabled per module param
>[  161.124076] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  161.124081] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  161.230817] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  161.230824] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  161.252080] [drm:intel_update_fbc], 
>[  161.252086] [drm:intel_update_fbc], fbc set to per-chip default
>[  161.252088] [drm:intel_update_fbc], fbc disabled per module param
>[  161.492069] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  161.492079] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  161.492085] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  161.492099] [drm:intel_opregion_asle_intr], non asle set request??
>[  161.492195] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  161.492201] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  161.492210] [drm:intel_opregion_asle_intr], non asle set request??
>[  161.492309] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  161.492315] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  161.492324] [drm:intel_opregion_asle_intr], non asle set request??
>[  161.524067] [drm:intel_update_fbc], 
>[  161.524075] [drm:intel_update_fbc], fbc set to per-chip default
>[  161.524079] [drm:intel_update_fbc], fbc disabled per module param
>[  161.524086] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  161.524091] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  162.568064] [drm:intel_crt_detect], CRT not detected via hotplug
>[  162.568073] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[  162.568581] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  162.576560] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  162.584561] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  162.592060] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  162.592068] [drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated from 2 to 2
>[  164.341384] sd 9:0:0:0: [sdb] Attached SCSI removable disk
>[  168.016126] usb 2-5: USB disconnect, device number 8
>[  169.561298] PM: Syncing filesystems ... done.
>[  169.567722] PM: Preparing system for mem sleep
>[  169.567858] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  169.567862] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  169.592080] [drm:intel_update_fbc], 
>[  169.592085] [drm:intel_update_fbc], fbc set to per-chip default
>[  169.592087] [drm:intel_update_fbc], fbc disabled per module param
>[  169.600037] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  169.600042] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  169.600046] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  169.600057] [drm:intel_opregion_asle_intr], non asle set request??
>[  169.600118] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  169.600121] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  169.600127] [drm:intel_opregion_asle_intr], non asle set request??
>[  169.600174] [drm:intel_crtc_cursor_set], 
>[  169.600178] [drm:intel_crtc_cursor_set], cursor off
>[  169.892229] [drm:drm_crtc_helper_set_config], 
>[  169.892232] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[  169.892240] [drm:drm_crtc_helper_set_config], 
>[  169.892241] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  169.892250] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  169.892260] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  169.892264] [drm:intel_update_fbc], 
>[  169.892266] [drm:intel_update_fbc], fbc set to per-chip default
>[  169.892268] [drm:intel_update_fbc], fbc disabled per module param
>[  169.908062] [drm:drm_crtc_helper_set_config], 
>[  169.908064] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  169.908068] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  169.908156] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[  169.924096] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[  169.940083] PM: Entering mem sleep
>[  169.940140] Suspending console(s) (use no_console_suspend to debug)
>[  169.941171] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  169.941376] sd 0:0:0:0: [sda] Stopping disk
>[  170.077099] [drm:drm_crtc_helper_set_mode], [CRTC:4]
>[  170.082352] PM: suspend of drv:psmouse dev:serio1 complete after 141.133 msecs
>[  170.099414] [drm:intel_update_fbc], 
>[  170.099417] [drm:intel_update_fbc], fbc set to per-chip default
>[  170.099418] [drm:intel_update_fbc], fbc disabled per module param
>[  170.099422] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  170.099424] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  170.099430] [drm:i9xx_crtc_mode_set], using SSC reference clock of 96 MHz
>[  170.099456] [drm:i9xx_crtc_mode_set], Mode for pipe B:
>[  170.099458] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  170.099761] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[  170.100617] uhci_hcd 0000:00:1a.0: PCI INT A disabled
>[  170.101012] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe A
>[  170.104056] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  170.104062] [drm:intel_update_fbc], 
>[  170.104064] [drm:intel_update_fbc], fbc set to per-chip default
>[  170.104066] [drm:intel_update_fbc], fbc disabled per module param
>[  170.104069] [drm:intel_update_fbc], unsupported config, disabling FBC
>[  170.104072] [drm:g4x_disable_fbc], disabled FBC
>[  170.104077] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  170.104079] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  170.104086] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1366x768]
>[  170.104089] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  170.104091] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  170.104606] [drm:intel_update_fbc], 
>[  170.104607] [drm:intel_update_fbc], fbc set to per-chip default
>[  170.104609] [drm:intel_update_fbc], fbc disabled per module param
>[  170.104612] [drm:intel_update_fbc], unsupported config, disabling FBC
>[  170.104615] [drm:g4x_disable_fbc], disabled FBC
>[  170.104621] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  170.104627] [drm:intel_panel_get_max_backlight], max backlight PWM = 16711425
>[  170.104638] [drm:intel_dp_link_down], 
>[  170.116080] ehci_hcd 0000:00:1d.7: PCI INT A disabled
>[  170.136080] uhci_hcd 0000:00:1d.0: PCI INT A disabled
>[  170.136084] uhci_hcd 0000:00:1d.1: PCI INT B disabled
>[  170.136126] uhci_hcd 0000:00:1d.3: PCI INT C disabled
>[  170.136128] uhci_hcd 0000:00:1d.2: PCI INT D disabled
>[  170.164052] ehci_hcd 0000:00:1a.7: PCI INT D disabled
>[  170.408437] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
>[  170.424051] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 323.457 msecs
>[  170.518470] PM: suspend of drv:sd dev:0:0:0:0 complete after 577.304 msecs
>[  170.518492] PM: suspend of drv:scsi dev:target0:0:0 complete after 577.295 msecs
>[  170.518513] PM: suspend of drv:scsi dev:host0 complete after 418.582 msecs
>[  170.532066] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 431.521 msecs
>[  170.532087] PM: suspend of drv: dev:pci0000:00 complete after 431.460 msecs
>[  170.532092] PM: suspend of devices complete after 591.654 msecs
>[  170.532095] PM: suspend devices took 0.592 seconds
>[  170.564791] ehci_hcd 0000:00:1d.7: PME# enabled
>[  170.564799] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[  170.580767] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[  170.581711] ehci_hcd 0000:00:1a.7: PME# enabled
>[  170.581716] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[  170.596292] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[  170.596993] PM: late suspend of devices complete after 64.895 msecs
>[  170.597127] ACPI: Preparing to enter system sleep state S3
>[  170.597301] PM: Saving platform NVS memory
>[  170.597803] Disabling non-boot CPUs ...
>[  170.700148] CPU 1 is now offline
>[  170.700603] ACPI: Low-level resume complete
>[  170.700603] PM: Restoring platform NVS memory
>[  170.700603] CPU0: Thermal monitoring handled by SMI
>[  170.700603] Enabling non-boot CPUs ...
>[  170.700603] Booting Node 0 Processor 1 APIC 0x1
>[  170.700603] smpboot cpu 1: start_ip = 99000
>[  170.599639] Calibrating delay loop (skipped) already calibrated this CPU
>[  170.727917] NMI watchdog enabled, takes one hw-pmu counter.
>[  170.735456] CPU1 is up
>[  170.736908] ACPI: Waking up from system sleep state S3
>[  170.739695] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
>[  170.739701] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
>[  170.739757] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  170.739782] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[  170.739821] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[  170.739839] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[  170.739845] ehci_hcd 0000:00:1a.7: PME# disabled
>[  170.739863] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[  170.739881] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  170.739887] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[  170.739915] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[  170.739926] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd131d041)
>[  170.739930] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd660d570)
>[  170.739942] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100001, writing 0x100407)
>[  170.739986] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[  170.739996] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xd231d141)
>[  170.740029] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd560d460)
>[  170.740041] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[  170.740085] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[  170.740095] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xd331d241)
>[  170.740100] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xd450d350)
>[  170.740112] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[  170.740169] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  170.740192] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[  170.740221] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  170.740259] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  170.740296] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  170.740341] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[  170.740360] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[  170.740365] ehci_hcd 0000:00:1d.7: PME# disabled
>[  170.740382] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>[  170.740387] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
>[  170.740392] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
>[  170.740402] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>[  170.740484] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
>[  170.740580] ath9k 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  170.741142] PM: early resume of devices complete after 1.618 msecs
>[  170.741266] i915 0000:00:02.0: setting latency timer to 64
>[  170.741294] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[  170.741300] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[  170.741326] usb usb3: root hub lost power or was reset
>[  170.741342] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
>[  170.741404] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[  170.741524] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[  170.741530] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>[  170.741576] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[  170.741629] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  170.741635] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[  170.741659] usb usb4: root hub lost power or was reset
>[  170.741672] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[  170.741678] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[  170.741702] usb usb5: root hub lost power or was reset
>[  170.741714] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
>[  170.741720] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[  170.741744] usb usb6: root hub lost power or was reset
>[  170.741756] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[  170.741762] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[  170.741786] usb usb7: root hub lost power or was reset
>[  170.741800] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  170.741807] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[  170.741829] pci 0000:00:1e.0: setting latency timer to 64
>[  170.741846] ahci 0000:00:1f.2: setting latency timer to 64
>[  170.758829] sd 0:0:0:0: [sda] Starting disk
>[  170.823262] [drm:intel_opregion_setup], graphic opregion physical addr: 0xbba8c018
>[  170.823327] [drm:intel_opregion_setup], Public ACPI methods supported
>[  170.823329] [drm:intel_opregion_setup], SWSCI supported
>[  170.823331] [drm:intel_opregion_setup], ASLE supported
>[  170.823368] [drm:init_status_page], render ring hws offset: 0x00000000
>[  170.823546] [drm:init_ring_common], render ring head not reset to zero ctl 00000000 head 00001000 tail 00000000 start 00001000
>[  170.823561] [drm:init_status_page], bsd ring hws offset: 0x00021000
>[  170.823756] [drm:drm_crtc_helper_set_mode], [CRTC:4]
>[  170.823763] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  170.823767] [drm:i915_get_crtc_scanoutpos], trying to get scanoutpos for disabled pipe B
>[  170.823771] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  170.823777] [drm:intel_update_fbc], 
>[  170.823779] [drm:intel_update_fbc], fbc set to per-chip default
>[  170.823780] [drm:intel_update_fbc], fbc disabled per module param
>[  170.823783] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  170.823786] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  170.823792] [drm:i9xx_crtc_mode_set], using SSC reference clock of 96 MHz
>[  170.823817] [drm:i9xx_crtc_mode_set], Mode for pipe B:
>[  170.823819] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  170.824125] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[  170.864063] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  170.864068] [drm:intel_update_fbc], 
>[  170.864069] [drm:intel_update_fbc], fbc set to per-chip default
>[  170.864071] [drm:intel_update_fbc], fbc disabled per module param
>[  170.876087] PM: resume of drv:hub dev:5-0:1.0 complete after 117.312 msecs
>[  170.876095] PM: resume of drv: dev:ep_00 complete after 117.313 msecs
>[  170.876101] PM: resume of drv: dev:ep_81 complete after 117.323 msecs
>[  170.876126] PM: resume of drv: dev:ep_00 complete after 117.325 msecs
>[  170.876133] PM: resume of drv:hub dev:6-0:1.0 complete after 117.340 msecs
>[  170.876140] PM: resume of drv: dev:ep_00 complete after 117.385 msecs
>[  170.876146] PM: resume of drv: dev:ep_81 complete after 117.349 msecs
>[  170.876151] PM: resume of drv:hub dev:4-0:1.0 complete after 117.402 msecs
>[  170.876155] PM: resume of drv: dev:ep_00 complete after 117.335 msecs
>[  170.876159] PM: resume of drv: dev:ep_81 complete after 117.407 msecs
>[  170.876162] PM: resume of drv:hub dev:7-0:1.0 complete after 117.349 msecs
>[  170.876169] PM: resume of drv: dev:ep_81 complete after 117.353 msecs
>[  170.880062] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  170.880064] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  170.880070] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1366x768]
>[  170.880073] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  170.880075] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  170.880554] [drm:intel_update_fbc], 
>[  170.880555] [drm:intel_update_fbc], fbc set to per-chip default
>[  170.880557] [drm:intel_update_fbc], fbc disabled per module param
>[  170.880561] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  170.880564] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  170.880583] [drm:intel_opregion_asle_intr], non asle set request??
>[  170.880715] [drm:drm_crtc_helper_set_config], 
>[  170.880717] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  170.880725] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  170.883302] PM: resume of drv:i915 dev:0000:00:02.0 complete after 142.044 msecs
>[  170.888060] PM: resume of drv: dev:ep_00 complete after 129.509 msecs
>[  170.888069] PM: resume of drv:hub dev:2-0:1.0 complete after 129.530 msecs
>[  170.888078] PM: resume of drv: dev:ep_81 complete after 129.531 msecs
>[  170.980058] PM: resume of drv:hub dev:3-0:1.0 complete after 221.436 msecs
>[  170.980072] PM: resume of drv: dev:ep_81 complete after 221.411 msecs
>[  170.980089] PM: resume of drv: dev:ep_00 complete after 221.365 msecs
>[  171.000058] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[  171.218839] PM: resume of drv:uvcvideo dev:2-4:1.1 complete after 459.951 msecs
>[  171.218845] PM: resume of drv:uvcvideo dev:2-4:1.0 complete after 459.970 msecs
>[  171.218849] PM: resume of drv: dev:ep_00 complete after 459.956 msecs
>[  171.218862] PM: resume of drv: dev:ep_82 complete after 459.983 msecs
>[  171.360106] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  171.363395] ata2.00: configured for UDMA/100
>[  171.408078] usb 3-1: reset low-speed USB device number 2 using uhci_hcd
>[  171.715593] PM: resume of drv: dev:ep_00 complete after 956.674 msecs
>[  171.715604] PM: resume of drv:usbhid dev:3-1:1.0 complete after 956.693 msecs
>[  171.715623] PM: resume of drv: dev:ep_81 complete after 956.708 msecs
>[  172.160089] PM: resume of drv:battery dev:PNP0C0A:00 complete after 1401.603 msecs
>[  173.928073] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[  173.958648] ata1.00: configured for UDMA/133
>[  173.985809] PM: resume of drv:sd dev:0:0:0:0 complete after 3226.980 msecs
>[  173.985820] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1809.871 msecs
>[  173.985832] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3226.972 msecs
>[  173.992567] PM: resume of devices complete after 3251.387 msecs
>[  173.992776] PM: resume devices took 3.252 seconds
>[  173.992821] PM: Finishing wakeup.
>[  173.992822] Restarting tasks ... done.
>[  174.104137] usb 2-5: new high-speed USB device number 9 using ehci_hcd
>[  174.503397] scsi10 : usb-storage 2-5:1.0
>[  174.608243] video LNXVIDEO:01: Restoring backlight state
>[  174.608521] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[  174.608624] [drm:drm_mode_setcrtc], [CRTC:4]
>[  174.608632] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[  174.608635] [drm:drm_crtc_helper_set_config], 
>[  174.608637] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
>[  174.608648] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  174.608660] [drm:i9xx_update_plane], Writing base 031E9000 00000000 0 0 5632
>[  174.608664] [drm:intel_update_fbc], 
>[  174.608667] [drm:intel_update_fbc], fbc set to per-chip default
>[  174.608669] [drm:intel_update_fbc], fbc disabled per module param
>[  174.616127] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  174.616133] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  174.616149] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  174.616152] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  174.616158] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  174.616398] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  174.616403] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  174.624063] [drm:intel_crt_detect], CRT not detected via hotplug
>[  174.624072] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  174.624087] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  174.624091] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  174.632093] [drm:intel_crt_detect], CRT not detected via hotplug
>[  174.632102] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  174.632129] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  174.632134] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  174.632637] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  174.644587] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  174.656546] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  174.668041] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  174.668048] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  174.668062] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  174.668065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  174.668567] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  174.676543] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  174.684542] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  174.692043] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  174.692047] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  174.693355] [drm:intel_crtc_cursor_set], 
>[  174.695415] [drm:drm_mode_addfb], [FB:30]
>[  174.707426] [drm:intel_update_fbc], 
>[  174.707434] [drm:intel_update_fbc], fbc set to per-chip default
>[  174.707437] [drm:intel_update_fbc], fbc disabled per module param
>[  174.710146] [drm:drm_mode_addfb], [FB:29]
>[  174.723475] [drm:intel_update_fbc], 
>[  174.723479] [drm:intel_update_fbc], fbc set to per-chip default
>[  174.723481] [drm:intel_update_fbc], fbc disabled per module param
>[  175.401243] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  175.408591] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  175.416532] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  175.424043] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  175.432031] [drm:intel_crt_detect], CRT not detected via hotplug
>[  175.475103] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[  175.484087] atl1c 0000:05:00.0: irq 46 for MSI/MSI-X
>[  175.508127] scsi 10:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
>[  175.515492] sd 10:0:0:0: Attached scsi generic sg2 type 0
>[  175.545441] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[  176.907868] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  176.907880] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  176.907902] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  176.907908] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  176.907920] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  176.908337] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  176.908346] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  176.916074] [drm:intel_crt_detect], CRT not detected via hotplug
>[  176.916081] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  176.916092] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  176.916097] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  176.924072] [drm:intel_crt_detect], CRT not detected via hotplug
>[  176.924080] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  176.924099] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  176.924105] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  176.924611] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  176.932537] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  176.940537] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  176.948057] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  176.948066] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  176.948091] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  176.948096] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  176.948601] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  176.956556] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  176.964555] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  176.972069] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  176.972076] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  176.975356] [drm:intel_crtc_cursor_set], 
>[  176.975363] [drm:intel_crtc_cursor_set], cursor off
>[  177.058477] [drm:intel_crtc_cursor_set], 
>[  177.062419] [drm:drm_mode_addfb], [FB:30]
>[  177.082314] [drm:intel_update_fbc], 
>[  177.082321] [drm:intel_update_fbc], fbc set to per-chip default
>[  177.082323] [drm:intel_update_fbc], fbc disabled per module param
>[  177.082372] [drm:drm_mode_addfb], [FB:29]
>[  177.098374] [drm:intel_update_fbc], 
>[  177.098380] [drm:intel_update_fbc], fbc set to per-chip default
>[  177.098382] [drm:intel_update_fbc], fbc disabled per module param
>[  180.372932] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  180.372943] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  180.372955] [drm:intel_opregion_asle_intr], non asle set request??
>[  180.648040] [drm:intel_update_fbc], 
>[  180.648049] [drm:intel_update_fbc], fbc set to per-chip default
>[  180.648053] [drm:intel_update_fbc], fbc disabled per module param
>[  180.648060] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  180.648066] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  180.648459] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  180.648469] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  180.648492] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  180.648498] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  180.648509] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  180.648860] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  180.648869] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  180.656063] [drm:intel_crt_detect], CRT not detected via hotplug
>[  180.656073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  180.656090] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  180.656096] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  180.664066] [drm:intel_crt_detect], CRT not detected via hotplug
>[  180.664072] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  180.664093] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  180.664098] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  180.664604] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  180.672561] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  180.680566] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  180.688037] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  180.688046] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  180.688070] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  180.688076] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  180.688580] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  180.696546] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  180.704555] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  180.712054] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  180.712063] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  180.714449] [drm:intel_crtc_cursor_set], 
>[  180.714456] [drm:intel_crtc_cursor_set], cursor off
>[  180.804795] [drm:intel_crtc_cursor_set], 
>[  180.904043] [drm:intel_crt_detect], CRT not detected via hotplug
>[  180.904050] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[  180.904554] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  180.912590] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  180.920547] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  180.928028] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  180.928036] [drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated from 2 to 2
>[  182.609384] sd 10:0:0:0: [sdb] Attached SCSI removable disk
>[  186.169016] usb 2-5: USB disconnect, device number 9
>[  187.588213] PM: Syncing filesystems ... done.
>[  187.595259] PM: Preparing system for mem sleep
>[  187.595392] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  187.595397] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  187.616068] [drm:intel_update_fbc], 
>[  187.616073] [drm:intel_update_fbc], fbc set to per-chip default
>[  187.616076] [drm:intel_update_fbc], fbc disabled per module param
>[  187.624042] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  187.624048] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  187.624052] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  187.624064] [drm:intel_opregion_asle_intr], non asle set request??
>[  187.624126] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  187.624131] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  187.624137] [drm:intel_opregion_asle_intr], non asle set request??
>[  187.624184] [drm:intel_crtc_cursor_set], 
>[  187.624187] [drm:intel_crtc_cursor_set], cursor off
>[  188.052323] [drm:drm_crtc_helper_set_config], 
>[  188.052328] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[  188.052338] [drm:drm_crtc_helper_set_config], 
>[  188.052339] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  188.052350] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  188.052363] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  188.052367] [drm:intel_update_fbc], 
>[  188.052369] [drm:intel_update_fbc], fbc set to per-chip default
>[  188.052370] [drm:intel_update_fbc], fbc disabled per module param
>[  188.068043] [drm:drm_crtc_helper_set_config], 
>[  188.068047] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  188.068058] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  188.068173] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[  188.084107] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[  188.100104] PM: Entering mem sleep
>[  188.100143] Suspending console(s) (use no_console_suspend to debug)
>[  188.101169] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  188.101378] sd 0:0:0:0: [sda] Stopping disk
>[  188.243647] PM: suspend of drv:psmouse dev:serio1 complete after 142.428 msecs
>[  188.258357] uhci_hcd 0000:00:1a.0: PCI INT A disabled
>[  188.258776] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe A
>[  188.272051] ehci_hcd 0000:00:1d.7: PCI INT A disabled
>[  188.296113] uhci_hcd 0000:00:1d.1: PCI INT B disabled
>[  188.296118] uhci_hcd 0000:00:1d.0: PCI INT A disabled
>[  188.296127] uhci_hcd 0000:00:1d.2: PCI INT D disabled
>[  188.296129] uhci_hcd 0000:00:1d.3: PCI INT C disabled
>[  188.324069] ehci_hcd 0000:00:1a.7: PCI INT D disabled
>[  188.564454] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
>[  188.580063] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 321.734 msecs
>[  188.678617] PM: suspend of drv:sd dev:0:0:0:0 complete after 577.454 msecs
>[  188.678639] PM: suspend of drv:scsi dev:target0:0:0 complete after 577.441 msecs
>[  188.678660] PM: suspend of drv:scsi dev:host0 complete after 421.005 msecs
>[  188.692064] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 433.794 msecs
>[  188.692078] PM: suspend of drv: dev:pci0000:00 complete after 433.711 msecs
>[  188.692083] PM: suspend of devices complete after 591.631 msecs
>[  188.692085] PM: suspend devices took 0.592 seconds
>[  188.724785] ehci_hcd 0000:00:1d.7: PME# enabled
>[  188.724795] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[  188.740816] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[  188.741728] ehci_hcd 0000:00:1a.7: PME# enabled
>[  188.741732] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[  188.756292] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[  188.756991] PM: late suspend of devices complete after 64.909 msecs
>[  188.757130] ACPI: Preparing to enter system sleep state S3
>[  188.757314] PM: Saving platform NVS memory
>[  188.757829] Disabling non-boot CPUs ...
>[  188.860119] CPU 1 is now offline
>[  188.860594] ACPI: Low-level resume complete
>[  188.860594] PM: Restoring platform NVS memory
>[  188.860594] CPU0: Thermal monitoring handled by SMI
>[  188.860594] Enabling non-boot CPUs ...
>[  188.860594] Booting Node 0 Processor 1 APIC 0x1
>[  188.860594] smpboot cpu 1: start_ip = 99000
>[  188.759677] Calibrating delay loop (skipped) already calibrated this CPU
>[  188.888025] NMI watchdog enabled, takes one hw-pmu counter.
>[  188.895290] CPU1 is up
>[  188.896746] ACPI: Waking up from system sleep state S3
>[  188.899529] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
>[  188.899535] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
>[  188.899591] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  188.899616] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[  188.899655] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[  188.899673] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[  188.899679] ehci_hcd 0000:00:1a.7: PME# disabled
>[  188.899696] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[  188.899714] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  188.899720] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[  188.899748] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[  188.899759] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd131d041)
>[  188.899764] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd660d570)
>[  188.899776] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100001, writing 0x100407)
>[  188.899818] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[  188.899829] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xd231d141)
>[  188.899834] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd560d460)
>[  188.899846] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[  188.899889] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[  188.899899] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xd331d241)
>[  188.899904] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xd450d350)
>[  188.899916] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[  188.899972] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  188.899994] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[  188.900054] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  188.900091] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  188.900128] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  188.900173] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[  188.900193] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[  188.900198] ehci_hcd 0000:00:1d.7: PME# disabled
>[  188.900215] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>[  188.900220] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
>[  188.900225] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
>[  188.900235] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>[  188.900317] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
>[  188.900413] ath9k 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  188.900976] PM: early resume of devices complete after 1.618 msecs
>[  188.901052] i915 0000:00:02.0: setting latency timer to 64
>[  188.901092] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[  188.901098] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[  188.901124] usb usb3: root hub lost power or was reset
>[  188.901139] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
>[  188.901145] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[  188.901173] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[  188.901179] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>[  188.901225] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[  188.901274] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  188.901280] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[  188.901304] usb usb4: root hub lost power or was reset
>[  188.901317] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[  188.901323] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[  188.901346] usb usb5: root hub lost power or was reset
>[  188.901359] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
>[  188.901365] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[  188.901388] usb usb6: root hub lost power or was reset
>[  188.901401] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[  188.901407] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[  188.901430] usb usb7: root hub lost power or was reset
>[  188.901444] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  188.901451] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[  188.901473] pci 0000:00:1e.0: setting latency timer to 64
>[  188.901490] ahci 0000:00:1f.2: setting latency timer to 64
>[  188.918320] sd 0:0:0:0: [sda] Starting disk
>[  188.983602] [drm:intel_opregion_setup], graphic opregion physical addr: 0xbba8c018
>[  188.983672] [drm:intel_opregion_setup], Public ACPI methods supported
>[  188.983674] [drm:intel_opregion_setup], SWSCI supported
>[  188.983675] [drm:intel_opregion_setup], ASLE supported
>[  188.983705] [drm:init_status_page], render ring hws offset: 0x00000000
>[  188.983882] [drm:init_ring_common], render ring head not reset to zero ctl 00000000 head 00001000 tail 00000000 start 00001000
>[  188.983896] [drm:init_status_page], bsd ring hws offset: 0x00021000
>[  188.984137] [drm:drm_crtc_helper_set_mode], [CRTC:4]
>[  188.984144] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  188.984149] [drm:i915_get_crtc_scanoutpos], trying to get scanoutpos for disabled pipe B
>[  188.984153] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  188.984159] [drm:intel_update_fbc], 
>[  188.984161] [drm:intel_update_fbc], fbc set to per-chip default
>[  188.984163] [drm:intel_update_fbc], fbc disabled per module param
>[  188.984166] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  188.984168] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  188.984174] [drm:i9xx_crtc_mode_set], using SSC reference clock of 96 MHz
>[  188.984200] [drm:i9xx_crtc_mode_set], Mode for pipe B:
>[  188.984203] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  188.984505] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[  189.024048] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  189.024057] [drm:intel_update_fbc], 
>[  189.024059] [drm:intel_update_fbc], fbc set to per-chip default
>[  189.024061] [drm:intel_update_fbc], fbc disabled per module param
>[  189.036102] PM: resume of drv:hub dev:7-0:1.0 complete after 117.796 msecs
>[  189.036111] PM: resume of drv: dev:ep_00 complete after 117.800 msecs
>[  189.036118] PM: resume of drv: dev:ep_81 complete after 117.811 msecs
>[  189.036140] PM: resume of drv: dev:ep_00 complete after 117.863 msecs
>[  189.036147] PM: resume of drv:hub dev:5-0:1.0 complete after 117.877 msecs
>[  189.036155] PM: resume of drv: dev:ep_00 complete after 117.896 msecs
>[  189.036160] PM: resume of drv:hub dev:6-0:1.0 complete after 117.872 msecs
>[  189.036163] PM: resume of drv:hub dev:4-0:1.0 complete after 117.909 msecs
>[  189.036168] PM: resume of drv: dev:ep_00 complete after 117.874 msecs
>[  189.036171] PM: resume of drv: dev:ep_81 complete after 117.898 msecs
>[  189.036174] PM: resume of drv: dev:ep_81 complete after 117.883 msecs
>[  189.036178] PM: resume of drv: dev:ep_81 complete after 117.922 msecs
>[  189.040029] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  189.040032] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  189.040037] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1366x768]
>[  189.040040] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  189.040042] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  189.040521] [drm:intel_update_fbc], 
>[  189.040522] [drm:intel_update_fbc], fbc set to per-chip default
>[  189.040524] [drm:intel_update_fbc], fbc disabled per module param
>[  189.040528] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  189.040531] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  189.040539] [drm:intel_opregion_asle_intr], non asle set request??
>[  189.040691] [drm:drm_crtc_helper_set_config], 
>[  189.040693] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  189.040701] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  189.043311] PM: resume of drv:i915 dev:0000:00:02.0 complete after 142.268 msecs
>[  189.048071] PM: resume of drv: dev:ep_00 complete after 129.846 msecs
>[  189.048075] PM: resume of drv:hub dev:2-0:1.0 complete after 129.858 msecs
>[  189.048084] PM: resume of drv: dev:ep_81 complete after 129.863 msecs
>[  189.140073] PM: resume of drv:hub dev:3-0:1.0 complete after 221.837 msecs
>[  189.140085] PM: resume of drv: dev:ep_81 complete after 221.847 msecs
>[  189.140088] PM: resume of drv: dev:ep_00 complete after 221.843 msecs
>[  189.160064] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[  189.378780] PM: resume of drv: dev:ep_00 complete after 460.412 msecs
>[  189.378786] PM: resume of drv:uvcvideo dev:2-4:1.1 complete after 460.423 msecs
>[  189.378791] PM: resume of drv:uvcvideo dev:2-4:1.0 complete after 460.436 msecs
>[  189.378812] PM: resume of drv: dev:ep_82 complete after 460.452 msecs
>[  189.464062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  189.467482] ata2.00: configured for UDMA/100
>[  189.568075] usb 3-1: reset low-speed USB device number 2 using uhci_hcd
>[  189.874279] PM: resume of drv: dev:ep_00 complete after 955.882 msecs
>[  189.874285] PM: resume of drv:usbhid dev:3-1:1.0 complete after 955.900 msecs
>[  189.874306] PM: resume of drv: dev:ep_81 complete after 955.917 msecs
>[  190.320088] PM: resume of drv:battery dev:PNP0C0A:00 complete after 1411.684 msecs
>[  192.144065] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[  192.174342] ata1.00: configured for UDMA/133
>[  192.201492] PM: resume of drv:sd dev:0:0:0:0 complete after 3283.173 msecs
>[  192.201508] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1860.978 msecs
>[  192.201514] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3283.165 msecs
>[  192.208193] PM: resume of devices complete after 3307.181 msecs
>[  192.208382] PM: resume devices took 3.308 seconds
>[  192.208421] PM: Finishing wakeup.
>[  192.208422] Restarting tasks ... done.
>[  192.320080] usb 2-5: new high-speed USB device number 10 using ehci_hcd
>[  192.478704] scsi11 : usb-storage 2-5:1.0
>[  192.840216] video LNXVIDEO:01: Restoring backlight state
>[  192.840475] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[  192.840553] [drm:drm_mode_setcrtc], [CRTC:4]
>[  192.840562] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[  192.840565] [drm:drm_crtc_helper_set_config], 
>[  192.840567] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:29] #connectors=1 (x y) (0 0)
>[  192.840580] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  192.840592] [drm:i9xx_update_plane], Writing base 08835000 00000000 0 0 5632
>[  192.840597] [drm:intel_update_fbc], 
>[  192.840599] [drm:intel_update_fbc], fbc set to per-chip default
>[  192.840601] [drm:intel_update_fbc], fbc disabled per module param
>[  192.856140] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  192.856147] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  192.856162] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  192.856165] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  192.856171] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  192.856425] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  192.856431] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  192.864032] [drm:intel_crt_detect], CRT not detected via hotplug
>[  192.864038] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  192.864053] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  192.864056] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  192.872112] [drm:intel_crt_detect], CRT not detected via hotplug
>[  192.872119] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  192.872140] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  192.872144] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  192.872646] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  192.880565] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  192.888557] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  192.896060] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  192.896064] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  192.896071] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  192.896073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  192.896574] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  192.904561] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  192.912554] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  192.920063] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  192.920072] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  192.922438] [drm:intel_crtc_cursor_set], 
>[  192.925205] [drm:drm_mode_addfb], [FB:31]
>[  192.931997] [drm:intel_update_fbc], 
>[  192.932067] [drm:intel_update_fbc], fbc set to per-chip default
>[  192.932070] [drm:intel_update_fbc], fbc disabled per module param
>[  192.950184] [drm:drm_mode_addfb], [FB:29]
>[  192.964198] [drm:intel_update_fbc], 
>[  192.964204] [drm:intel_update_fbc], fbc set to per-chip default
>[  192.964206] [drm:intel_update_fbc], fbc disabled per module param
>[  193.478705] scsi 11:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
>[  193.489638] sd 11:0:0:0: Attached scsi generic sg2 type 0
>[  193.590204] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  193.596532] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  193.604570] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  193.613233] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  193.628512] [drm:intel_crt_detect], CRT not detected via hotplug
>[  193.653215] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[  193.659565] atl1c 0000:05:00.0: irq 46 for MSI/MSI-X
>[  193.717237] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[  194.985122] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  194.985130] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  194.985144] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  194.985148] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  194.985154] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  194.985371] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  194.985375] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  194.992057] [drm:intel_crt_detect], CRT not detected via hotplug
>[  194.992062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  194.992073] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  194.992076] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  195.000066] [drm:intel_crt_detect], CRT not detected via hotplug
>[  195.000073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  195.000090] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  195.000096] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  195.000603] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  195.008576] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  195.016595] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  195.024055] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  195.024065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  195.024095] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  195.024101] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  195.024606] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  195.032569] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  195.040535] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  195.048035] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  195.048044] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  195.052870] [drm:intel_crtc_cursor_set], 
>[  195.052880] [drm:intel_crtc_cursor_set], cursor off
>[  195.142705] [drm:intel_crtc_cursor_set], 
>[  195.150954] [drm:drm_mode_addfb], [FB:31]
>[  195.178510] [drm:intel_update_fbc], 
>[  195.178519] [drm:intel_update_fbc], fbc set to per-chip default
>[  195.178522] [drm:intel_update_fbc], fbc disabled per module param
>[  196.853677] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  196.853689] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  196.853714] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  196.853719] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  196.853731] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  196.854114] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  196.854121] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  196.864041] [drm:intel_crt_detect], CRT not detected via hotplug
>[  196.864051] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  196.864064] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  196.864069] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  196.872084] [drm:intel_crt_detect], CRT not detected via hotplug
>[  196.872092] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  196.872111] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  196.872117] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  196.872623] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  196.880591] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  196.888565] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  196.896077] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  196.896087] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  196.896112] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  196.896117] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  196.896622] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  196.908580] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  196.916593] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  196.924068] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  196.924075] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  196.925487] [drm:intel_crtc_cursor_set], 
>[  196.925491] [drm:intel_crtc_cursor_set], cursor off
>[  197.010210] [drm:intel_crtc_cursor_set], 
>[  197.013731] [drm:drm_mode_addfb], [FB:29]
>[  197.015877] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  197.015884] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  197.015902] [drm:intel_opregion_asle_intr], non asle set request??
>[  197.039919] [drm:intel_update_fbc], 
>[  197.039926] [drm:intel_update_fbc], fbc set to per-chip default
>[  197.039931] [drm:intel_update_fbc], fbc disabled per module param
>[  197.284066] [drm:intel_update_fbc], 
>[  197.284072] [drm:intel_update_fbc], fbc set to per-chip default
>[  197.284076] [drm:intel_update_fbc], fbc disabled per module param
>[  197.284082] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  197.284087] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  197.386006] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  197.386014] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  197.408085] [drm:intel_update_fbc], 
>[  197.408092] [drm:intel_update_fbc], fbc set to per-chip default
>[  197.408095] [drm:intel_update_fbc], fbc disabled per module param
>[  197.684061] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  197.684070] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  197.684076] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  197.684105] [drm:intel_opregion_asle_intr], non asle set request??
>[  197.684170] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  197.684177] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  197.684199] [drm:intel_opregion_asle_intr], non asle set request??
>[  197.684268] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  197.684275] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  197.684285] [drm:intel_opregion_asle_intr], non asle set request??
>[  197.708071] [drm:intel_update_fbc], 
>[  197.708079] [drm:intel_update_fbc], fbc set to per-chip default
>[  197.708083] [drm:intel_update_fbc], fbc disabled per module param
>[  197.708090] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  197.708096] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  199.080046] [drm:intel_crt_detect], CRT not detected via hotplug
>[  199.080056] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[  199.080564] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  199.088538] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  199.096533] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  199.104037] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  199.104046] [drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated from 2 to 2
>[  200.581440] sd 11:0:0:0: [sdb] Attached SCSI removable disk
>[  204.256181] usb 2-5: USB disconnect, device number 10
>[  204.382180] [drm:drm_crtc_helper_set_mode], [CRTC:4]
>[  204.382195] [drm:i9xx_crtc_mode_set], using SSC reference clock of 96 MHz
>[  204.382246] [drm:i9xx_crtc_mode_set], Mode for pipe B:
>[  204.382251] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  204.382559] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[  204.383115] atkbd serio0: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0).
>[  204.383123] atkbd serio0: Use 'setkeycodes e060 <keycode>' to make it known.
>[  204.387746] atkbd serio0: Unknown key pressed (translated set 2, code 0x63 on isa0060/serio0).
>[  204.387755] atkbd serio0: Use 'setkeycodes 63 <keycode>' to make it known.
>[  204.420081] [drm:i9xx_update_plane], Writing base 0094E000 00000000 0 0 5632
>[  204.420090] [drm:intel_update_fbc], 
>[  204.420092] [drm:intel_update_fbc], fbc set to per-chip default
>[  204.420095] [drm:intel_update_fbc], fbc disabled per module param
>[  204.436067] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  204.436075] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  204.436083] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1366x768]
>[  204.436088] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  204.436091] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  204.436575] [drm:intel_update_fbc], 
>[  204.436577] [drm:intel_update_fbc], fbc set to per-chip default
>[  204.436579] [drm:intel_update_fbc], fbc disabled per module param
>[  204.444082] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  204.444090] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  204.444093] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  204.444105] [drm:intel_opregion_asle_intr], non asle set request??
>[  204.444114] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  204.444118] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  204.444123] [drm:intel_opregion_asle_intr], non asle set request??
>[  204.468053] [drm:intel_update_fbc], 
>[  204.468059] [drm:intel_update_fbc], fbc set to per-chip default
>[  204.468062] [drm:intel_update_fbc], fbc disabled per module param
>[  204.468066] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  204.468069] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  204.468118] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  204.468122] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  204.492074] [drm:intel_update_fbc], 
>[  204.492079] [drm:intel_update_fbc], fbc set to per-chip default
>[  204.492082] [drm:intel_update_fbc], fbc disabled per module param
>[  204.824051] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  204.824057] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  204.824070] [drm:intel_opregion_asle_intr], non asle set request??
>[  204.824108] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  204.824111] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  204.824117] [drm:intel_opregion_asle_intr], non asle set request??
>[  204.840444] [drm:drm_mode_addfb], [FB:31]
>[  204.869776] [drm:intel_update_fbc], 
>[  204.869783] [drm:intel_update_fbc], fbc set to per-chip default
>[  204.869785] [drm:intel_update_fbc], fbc disabled per module param
>[  204.987213] [drm:drm_mode_addfb], [FB:29]
>[  205.014197] [drm:intel_update_fbc], 
>[  205.014203] [drm:intel_update_fbc], fbc set to per-chip default
>[  205.014205] [drm:intel_update_fbc], fbc disabled per module param
>[  205.014240] [drm:drm_mode_addfb], [FB:31]
>[  205.030243] [drm:intel_update_fbc], 
>[  205.030247] [drm:intel_update_fbc], fbc set to per-chip default
>[  205.030249] [drm:intel_update_fbc], fbc disabled per module param
>[  205.860647] PM: Syncing filesystems ... done.
>[  205.868148] PM: Preparing system for mem sleep
>[  205.868247] [drm:intel_crtc_cursor_set], 
>[  205.868250] [drm:intel_crtc_cursor_set], cursor off
>[  206.216224] [drm:drm_crtc_helper_set_config], 
>[  206.216228] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[  206.216235] [drm:drm_crtc_helper_set_config], 
>[  206.216236] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  206.216246] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  206.216256] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  206.216260] [drm:intel_update_fbc], 
>[  206.216262] [drm:intel_update_fbc], fbc set to per-chip default
>[  206.216263] [drm:intel_update_fbc], fbc disabled per module param
>[  206.272057] [drm:intel_wait_for_vblank], vblank wait timed out
>[  206.272061] [drm:drm_crtc_helper_set_config], 
>[  206.272062] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  206.272067] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  206.272152] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[  206.288099] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[  206.304093] PM: Entering mem sleep
>[  206.304148] Suspending console(s) (use no_console_suspend to debug)
>[  206.305160] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  206.305367] sd 0:0:0:0: [sda] Stopping disk
>[  206.444083] PM: suspend of drv:psmouse dev:serio1 complete after 138.881 msecs
>[  206.457791] uhci_hcd 0000:00:1a.0: PCI INT A disabled
>[  206.458214] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe A
>[  206.472061] ehci_hcd 0000:00:1d.7: PCI INT A disabled
>[  206.496086] uhci_hcd 0000:00:1d.2: PCI INT D disabled
>[  206.496102] uhci_hcd 0000:00:1d.3: PCI INT C disabled
>[  206.496108] uhci_hcd 0000:00:1d.1: PCI INT B disabled
>[  206.496148] uhci_hcd 0000:00:1d.0: PCI INT A disabled
>[  206.524056] ehci_hcd 0000:00:1a.7: PCI INT D disabled
>[  206.764429] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
>[  206.780052] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 322.283 msecs
>[  206.884210] PM: suspend of drv:sd dev:0:0:0:0 complete after 579.055 msecs
>[  206.884232] PM: suspend of drv:scsi dev:target0:0:0 complete after 579.047 msecs
>[  206.884253] PM: suspend of drv:scsi dev:host0 complete after 427.079 msecs
>[  206.900064] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 442.337 msecs
>[  206.900078] PM: suspend of drv: dev:pci0000:00 complete after 441.926 msecs
>[  206.900083] PM: suspend of devices complete after 595.634 msecs
>[  206.900085] PM: suspend devices took 0.596 seconds
>[  206.932792] ehci_hcd 0000:00:1d.7: PME# enabled
>[  206.932801] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[  206.948795] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[  206.949740] ehci_hcd 0000:00:1a.7: PME# enabled
>[  206.949744] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[  206.964294] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[  206.965118] PM: late suspend of devices complete after 65.032 msecs
>[  206.965261] ACPI: Preparing to enter system sleep state S3
>[  206.965436] PM: Saving platform NVS memory
>[  206.965951] Disabling non-boot CPUs ...
>[  207.068099] CPU 1 is now offline
>[  207.068580] ACPI: Low-level resume complete
>[  207.068580] PM: Restoring platform NVS memory
>[  207.068580] CPU0: Thermal monitoring handled by SMI
>[  207.068580] Enabling non-boot CPUs ...
>[  207.068580] Booting Node 0 Processor 1 APIC 0x1
>[  207.068580] smpboot cpu 1: start_ip = 99000
>[  206.967814] Calibrating delay loop (skipped) already calibrated this CPU
>[  207.094011] NMI watchdog enabled, takes one hw-pmu counter.
>[  207.098027] CPU1 is up
>[  207.099449] ACPI: Waking up from system sleep state S3
>[  207.102236] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
>[  207.102243] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
>[  207.102299] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  207.102325] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[  207.102364] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[  207.102383] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[  207.102388] ehci_hcd 0000:00:1a.7: PME# disabled
>[  207.102406] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[  207.102424] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  207.102429] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[  207.102458] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[  207.102468] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd131d041)
>[  207.102473] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd660d570)
>[  207.102485] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100001, writing 0x100407)
>[  207.102528] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[  207.102539] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xd231d141)
>[  207.102544] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd560d460)
>[  207.102555] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[  207.102599] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[  207.102609] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xd331d241)
>[  207.102614] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xd450d350)
>[  207.102626] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[  207.102682] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  207.102705] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[  207.102735] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  207.102772] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  207.102809] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  207.102855] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[  207.102874] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[  207.102879] ehci_hcd 0000:00:1d.7: PME# disabled
>[  207.102896] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>[  207.102901] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
>[  207.102905] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
>[  207.102916] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>[  207.102997] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
>[  207.103094] ath9k 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  207.103654] PM: early resume of devices complete after 1.592 msecs
>[  207.103760] i915 0000:00:02.0: setting latency timer to 64
>[  207.104108] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[  207.104114] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[  207.104140] usb usb3: root hub lost power or was reset
>[  207.104156] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
>[  207.104162] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[  207.104191] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[  207.104196] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>[  207.104243] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[  207.104296] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  207.104301] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[  207.104325] usb usb4: root hub lost power or was reset
>[  207.104338] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[  207.104344] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[  207.104367] usb usb5: root hub lost power or was reset
>[  207.104380] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
>[  207.104386] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[  207.104410] usb usb6: root hub lost power or was reset
>[  207.104422] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[  207.104428] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[  207.104452] usb usb7: root hub lost power or was reset
>[  207.104466] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  207.104473] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[  207.104495] pci 0000:00:1e.0: setting latency timer to 64
>[  207.104512] ahci 0000:00:1f.2: setting latency timer to 64
>[  207.121450] sd 0:0:0:0: [sda] Starting disk
>[  207.186066] [drm:intel_opregion_setup], graphic opregion physical addr: 0xbba8c018
>[  207.186131] [drm:intel_opregion_setup], Public ACPI methods supported
>[  207.186133] [drm:intel_opregion_setup], SWSCI supported
>[  207.186134] [drm:intel_opregion_setup], ASLE supported
>[  207.186170] [drm:init_status_page], render ring hws offset: 0x00000000
>[  207.186351] [drm:init_ring_common], render ring head not reset to zero ctl 00000000 head 00001000 tail 00000000 start 00001000
>[  207.186365] [drm:init_status_page], bsd ring hws offset: 0x00021000
>[  207.186560] [drm:drm_crtc_helper_set_mode], [CRTC:4]
>[  207.186567] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  207.186571] [drm:i915_get_crtc_scanoutpos], trying to get scanoutpos for disabled pipe B
>[  207.186576] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  207.186581] [drm:intel_update_fbc], 
>[  207.186583] [drm:intel_update_fbc], fbc set to per-chip default
>[  207.186585] [drm:intel_update_fbc], fbc disabled per module param
>[  207.186588] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  207.186590] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  207.186596] [drm:i9xx_crtc_mode_set], using SSC reference clock of 96 MHz
>[  207.186621] [drm:i9xx_crtc_mode_set], Mode for pipe B:
>[  207.186623] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  207.186926] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[  207.224060] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  207.224065] [drm:intel_update_fbc], 
>[  207.224066] [drm:intel_update_fbc], fbc set to per-chip default
>[  207.224068] [drm:intel_update_fbc], fbc disabled per module param
>[  207.240090] PM: resume of drv:hub dev:5-0:1.0 complete after 118.706 msecs
>[  207.240097] PM: resume of drv: dev:ep_00 complete after 118.704 msecs
>[  207.240103] PM: resume of drv: dev:ep_81 complete after 118.717 msecs
>[  207.240108] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  207.240110] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  207.240115] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1366x768]
>[  207.240119] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  207.240122] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  207.240139] PM: resume of drv:hub dev:7-0:1.0 complete after 118.708 msecs
>[  207.240147] PM: resume of drv: dev:ep_00 complete after 118.705 msecs
>[  207.240154] PM: resume of drv:hub dev:4-0:1.0 complete after 118.794 msecs
>[  207.240162] PM: resume of drv: dev:ep_00 complete after 118.790 msecs
>[  207.240168] PM: resume of drv:hub dev:6-0:1.0 complete after 118.760 msecs
>[  207.240176] PM: resume of drv: dev:ep_00 complete after 118.757 msecs
>[  207.240182] PM: resume of drv: dev:ep_81 complete after 118.748 msecs
>[  207.240188] PM: resume of drv: dev:ep_81 complete after 118.825 msecs
>[  207.240194] PM: resume of drv: dev:ep_81 complete after 118.783 msecs
>[  207.240603] [drm:intel_update_fbc], 
>[  207.240604] [drm:intel_update_fbc], fbc set to per-chip default
>[  207.240606] [drm:intel_update_fbc], fbc disabled per module param
>[  207.240610] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  207.240613] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  207.240633] [drm:intel_opregion_asle_intr], non asle set request??
>[  207.240765] [drm:drm_crtc_helper_set_config], 
>[  207.240767] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  207.240775] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  207.243354] PM: resume of drv:i915 dev:0000:00:02.0 complete after 139.602 msecs
>[  207.252060] PM: resume of drv: dev:ep_00 complete after 130.915 msecs
>[  207.252069] PM: resume of drv:hub dev:2-0:1.0 complete after 130.939 msecs
>[  207.252077] PM: resume of drv: dev:ep_81 complete after 130.941 msecs
>[  207.344057] PM: resume of drv: dev:ep_00 complete after 222.711 msecs
>[  207.344077] PM: resume of drv:hub dev:3-0:1.0 complete after 222.888 msecs
>[  207.344099] PM: resume of drv: dev:ep_81 complete after 222.849 msecs
>[  207.364050] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[  207.582806] PM: resume of drv:uvcvideo dev:2-4:1.1 complete after 461.307 msecs
>[  207.582811] PM: resume of drv:uvcvideo dev:2-4:1.0 complete after 461.326 msecs
>[  207.582814] PM: resume of drv: dev:ep_00 complete after 461.309 msecs
>[  207.582826] PM: resume of drv: dev:ep_82 complete after 461.338 msecs
>[  207.668053] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  207.671897] ata2.00: configured for UDMA/100
>[  207.772074] usb 3-1: reset low-speed USB device number 2 using uhci_hcd
>[  208.079182] PM: resume of drv: dev:ep_00 complete after 957.638 msecs
>[  208.079193] PM: resume of drv:usbhid dev:3-1:1.0 complete after 957.664 msecs
>[  208.079212] PM: resume of drv: dev:ep_81 complete after 957.676 msecs
>[  208.524084] PM: resume of drv:battery dev:PNP0C0A:00 complete after 1420.236 msecs
>[  210.292057] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[  210.323094] ata1.00: configured for UDMA/133
>[  210.350266] PM: resume of drv:sd dev:0:0:0:0 complete after 3228.817 msecs
>[  210.350282] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1808.118 msecs
>[  210.350293] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3228.819 msecs
>[  210.356923] PM: resume of devices complete after 3253.209 msecs
>[  210.357108] PM: resume devices took 3.256 seconds
>[  210.357151] PM: Finishing wakeup.
>[  210.357153] Restarting tasks ... done.
>[  210.468075] usb 2-5: new high-speed USB device number 11 using ehci_hcd
>[  210.867237] scsi12 : usb-storage 2-5:1.0
>[  210.960240] video LNXVIDEO:01: Restoring backlight state
>[  210.960718] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[  210.960783] [drm:drm_mode_setcrtc], [CRTC:4]
>[  210.960791] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[  210.960794] [drm:drm_crtc_helper_set_config], 
>[  210.960796] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:31] #connectors=1 (x y) (0 0)
>[  210.960808] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  210.960820] [drm:i9xx_update_plane], Writing base 0094E000 00000000 0 0 5632
>[  210.960824] [drm:intel_update_fbc], 
>[  210.960826] [drm:intel_update_fbc], fbc set to per-chip default
>[  210.960828] [drm:intel_update_fbc], fbc disabled per module param
>[  210.980139] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  210.980147] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  210.980161] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  210.980165] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  210.980171] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  210.980410] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  210.980415] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  210.992103] [drm:intel_crt_detect], CRT not detected via hotplug
>[  210.992110] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  210.992127] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  210.992130] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  211.000070] [drm:intel_crt_detect], CRT not detected via hotplug
>[  211.000074] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  211.000090] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  211.000093] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  211.000596] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  211.008568] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  211.016560] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  211.024060] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  211.024064] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  211.024070] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  211.024073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  211.024573] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  211.032556] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  211.040558] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  211.048056] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  211.048060] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  211.049477] [drm:intel_crtc_cursor_set], 
>[  211.055007] [drm:drm_mode_addfb], [FB:32]
>[  211.086300] [drm:intel_update_fbc], 
>[  211.086306] [drm:intel_update_fbc], fbc set to per-chip default
>[  211.086309] [drm:intel_update_fbc], fbc disabled per module param
>[  211.086353] [drm:drm_mode_addfb], [FB:31]
>[  211.102380] [drm:intel_update_fbc], 
>[  211.102385] [drm:intel_update_fbc], fbc set to per-chip default
>[  211.102387] [drm:intel_update_fbc], fbc disabled per module param
>[  211.729660] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  211.736631] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  211.748572] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  211.756032] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  211.768026] [drm:intel_crt_detect], CRT not detected via hotplug
>[  211.792190] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[  211.800648] atl1c 0000:05:00.0: irq 46 for MSI/MSI-X
>[  211.861241] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[  211.876151] scsi 12:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
>[  211.878750] sd 12:0:0:0: Attached scsi generic sg2 type 0
>[  213.173358] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  213.173366] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  213.173382] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  213.173385] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  213.173392] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  213.173618] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  213.173623] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  213.188064] [drm:intel_crt_detect], CRT not detected via hotplug
>[  213.188073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  213.188087] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  213.188091] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  213.196038] [drm:intel_crt_detect], CRT not detected via hotplug
>[  213.196045] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  213.196082] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  213.196088] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  213.196595] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  213.204535] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  213.212556] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  213.220055] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  213.220063] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  213.220082] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  213.220087] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  213.220592] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  213.228545] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  213.236567] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  213.244039] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  213.244047] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  213.247447] [drm:intel_crtc_cursor_set], 
>[  213.247455] [drm:intel_crtc_cursor_set], cursor off
>[  213.330788] [drm:intel_crtc_cursor_set], 
>[  213.334843] [drm:drm_mode_addfb], [FB:32]
>[  213.337070] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  213.337079] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  213.337095] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  213.337099] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  213.337106] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  213.337323] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  213.337327] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  213.344053] [drm:intel_crt_detect], CRT not detected via hotplug
>[  213.344057] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  213.344064] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  213.344066] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  213.352050] [drm:intel_crt_detect], CRT not detected via hotplug
>[  213.352056] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  213.352076] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  213.352080] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  213.352582] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  213.360543] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  213.364891] [drm:intel_update_fbc], 
>[  213.364897] [drm:intel_update_fbc], fbc set to per-chip default
>[  213.364902] [drm:intel_update_fbc], fbc disabled per module param
>[  213.368571] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  213.376054] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  213.376062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  213.376086] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  213.376092] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  213.376596] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  213.384544] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  213.392570] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  213.400038] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  213.400047] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  213.402110] [drm:intel_crtc_cursor_set], 
>[  213.402118] [drm:intel_crtc_cursor_set], cursor off
>[  213.485670] [drm:intel_crtc_cursor_set], 
>[  213.492441] [drm:drm_mode_addfb], [FB:31]
>[  213.525479] [drm:intel_update_fbc], 
>[  213.525485] [drm:intel_update_fbc], fbc set to per-chip default
>[  213.525488] [drm:intel_update_fbc], fbc disabled per module param
>[  217.256067] [drm:intel_crt_detect], CRT not detected via hotplug
>[  217.256076] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[  217.256584] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  217.264567] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  217.272560] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  217.280045] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  217.280054] [drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated from 2 to 2
>[  218.259636] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  218.259647] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  218.259670] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  218.259676] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  218.259688] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  218.260077] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  218.260087] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  218.268068] [drm:intel_crt_detect], CRT not detected via hotplug
>[  218.268075] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  218.268087] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  218.268092] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  218.276092] [drm:intel_crt_detect], CRT not detected via hotplug
>[  218.276100] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  218.276122] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  218.276129] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  218.276635] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  218.284540] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  218.292535] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  218.300070] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  218.300079] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  218.300105] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  218.300111] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  218.300615] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  218.308560] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  218.316584] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  218.324081] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  218.324091] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  218.325536] [drm:intel_crtc_cursor_set], 
>[  218.325539] [drm:intel_crtc_cursor_set], cursor off
>[  218.410059] [drm:intel_crtc_cursor_set], 
>[  218.412403] [drm:drm_mode_addfb], [FB:32]
>[  218.414185] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  218.414192] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  218.414217] [drm:intel_opregion_asle_intr], non asle set request??
>[  218.435604] [drm:intel_update_fbc], 
>[  218.435612] [drm:intel_update_fbc], fbc set to per-chip default
>[  218.435617] [drm:intel_update_fbc], fbc disabled per module param
>[  218.684055] [drm:intel_update_fbc], 
>[  218.684060] [drm:intel_update_fbc], fbc set to per-chip default
>[  218.684065] [drm:intel_update_fbc], fbc disabled per module param
>[  218.684070] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  218.684076] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  218.791234] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  218.791241] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  218.812064] [drm:intel_update_fbc], 
>[  218.812070] [drm:intel_update_fbc], fbc set to per-chip default
>[  218.812072] [drm:intel_update_fbc], fbc disabled per module param
>[  218.982981] sd 12:0:0:0: [sdb] Attached SCSI removable disk
>[  219.052057] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  219.052064] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  219.052070] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  219.052098] [drm:intel_opregion_asle_intr], non asle set request??
>[  219.052160] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  219.052167] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  219.052189] [drm:intel_opregion_asle_intr], non asle set request??
>[  219.052258] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  219.052265] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  219.052274] [drm:intel_opregion_asle_intr], non asle set request??
>[  219.084070] [drm:intel_update_fbc], 
>[  219.084077] [drm:intel_update_fbc], fbc set to per-chip default
>[  219.084082] [drm:intel_update_fbc], fbc disabled per module param
>[  219.084087] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  219.084093] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  222.543233] usb 2-5: USB disconnect, device number 11
>[  223.999213] PM: Syncing filesystems ... done.
>[  224.005922] PM: Preparing system for mem sleep
>[  224.006050] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  224.006055] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  224.028066] [drm:intel_update_fbc], 
>[  224.028071] [drm:intel_update_fbc], fbc set to per-chip default
>[  224.028074] [drm:intel_update_fbc], fbc disabled per module param
>[  224.036054] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  224.036061] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  224.036065] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  224.036076] [drm:intel_opregion_asle_intr], non asle set request??
>[  224.036132] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  224.036136] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  224.036143] [drm:intel_opregion_asle_intr], non asle set request??
>[  224.036190] [drm:intel_crtc_cursor_set], 
>[  224.036194] [drm:intel_crtc_cursor_set], cursor off
>[  224.464384] [drm:drm_crtc_helper_set_config], 
>[  224.464388] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[  224.464396] [drm:drm_crtc_helper_set_config], 
>[  224.464398] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  224.464407] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  224.464418] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  224.464422] [drm:intel_update_fbc], 
>[  224.464423] [drm:intel_update_fbc], fbc set to per-chip default
>[  224.464425] [drm:intel_update_fbc], fbc disabled per module param
>[  224.472044] [drm:drm_crtc_helper_set_config], 
>[  224.472046] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  224.472050] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  224.472157] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[  224.488114] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[  224.504106] PM: Entering mem sleep
>[  224.504145] Suspending console(s) (use no_console_suspend to debug)
>[  224.505157] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  224.505364] sd 0:0:0:0: [sda] Stopping disk
>[  224.644855] PM: suspend of drv:psmouse dev:serio1 complete after 139.657 msecs
>[  224.659423] uhci_hcd 0000:00:1a.0: PCI INT A disabled
>[  224.659838] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe A
>[  224.672073] ehci_hcd 0000:00:1d.7: PCI INT A disabled
>[  224.696079] uhci_hcd 0000:00:1d.2: PCI INT D disabled
>[  224.696085] uhci_hcd 0000:00:1d.0: PCI INT A disabled
>[  224.696135] uhci_hcd 0000:00:1d.1: PCI INT B disabled
>[  224.696138] uhci_hcd 0000:00:1d.3: PCI INT C disabled
>[  224.724066] ehci_hcd 0000:00:1a.7: PCI INT D disabled
>[  224.964463] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
>[  224.980066] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 320.669 msecs
>[  225.082710] PM: suspend of drv:sd dev:0:0:0:0 complete after 577.558 msecs
>[  225.082732] PM: suspend of drv:scsi dev:target0:0:0 complete after 577.578 msecs
>[  225.082754] PM: suspend of drv:scsi dev:host0 complete after 424.022 msecs
>[  225.096065] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 436.733 msecs
>[  225.096087] PM: suspend of drv: dev:pci0000:00 complete after 436.654 msecs
>[  225.096106] PM: suspend of devices complete after 591.670 msecs
>[  225.096109] PM: suspend devices took 0.592 seconds
>[  225.128832] ehci_hcd 0000:00:1d.7: PME# enabled
>[  225.128841] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[  225.144822] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[  225.145765] ehci_hcd 0000:00:1a.7: PME# enabled
>[  225.145770] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[  225.160310] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[  225.161153] PM: late suspend of devices complete after 65.041 msecs
>[  225.161287] ACPI: Preparing to enter system sleep state S3
>[  225.161434] PM: Saving platform NVS memory
>[  225.161915] Disabling non-boot CPUs ...
>[  225.264152] CPU 1 is now offline
>[  225.264615] ACPI: Low-level resume complete
>[  225.264615] PM: Restoring platform NVS memory
>[  225.264615] CPU0: Thermal monitoring handled by SMI
>[  225.264615] Enabling non-boot CPUs ...
>[  225.264615] Booting Node 0 Processor 1 APIC 0x1
>[  225.264615] smpboot cpu 1: start_ip = 99000
>[  225.163601] Calibrating delay loop (skipped) already calibrated this CPU
>[  225.290488] NMI watchdog enabled, takes one hw-pmu counter.
>[  225.294936] CPU1 is up
>[  225.296394] ACPI: Waking up from system sleep state S3
>[  225.299186] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
>[  225.299192] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
>[  225.299248] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  225.299274] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[  225.299313] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[  225.299332] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[  225.299337] ehci_hcd 0000:00:1a.7: PME# disabled
>[  225.299355] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[  225.299373] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  225.299379] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[  225.299408] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[  225.299418] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd131d041)
>[  225.299423] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd660d570)
>[  225.299435] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100001, writing 0x100407)
>[  225.299478] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[  225.299489] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xd231d141)
>[  225.299493] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd560d460)
>[  225.299505] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[  225.299548] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[  225.299559] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xd331d241)
>[  225.299564] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xd450d350)
>[  225.299576] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[  225.299632] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  225.299655] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[  225.299685] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  225.299722] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  225.299759] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  225.299805] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[  225.299824] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[  225.299829] ehci_hcd 0000:00:1d.7: PME# disabled
>[  225.299846] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>[  225.299851] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
>[  225.299856] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
>[  225.299866] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>[  225.299948] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
>[  225.300068] ath9k 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  225.300631] PM: early resume of devices complete after 1.618 msecs
>[  225.300736] i915 0000:00:02.0: setting latency timer to 64
>[  225.301017] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[  225.301082] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[  225.301108] usb usb3: root hub lost power or was reset
>[  225.301124] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
>[  225.301130] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[  225.301159] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[  225.301165] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>[  225.301212] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[  225.301266] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  225.301272] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[  225.301296] usb usb4: root hub lost power or was reset
>[  225.301309] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[  225.301315] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[  225.301339] usb usb5: root hub lost power or was reset
>[  225.301352] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
>[  225.301358] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[  225.301382] usb usb6: root hub lost power or was reset
>[  225.301394] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[  225.301400] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[  225.301424] usb usb7: root hub lost power or was reset
>[  225.301438] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  225.301445] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[  225.301468] pci 0000:00:1e.0: setting latency timer to 64
>[  225.301484] ahci 0000:00:1f.2: setting latency timer to 64
>[  225.318411] sd 0:0:0:0: [sda] Starting disk
>[  225.382726] [drm:intel_opregion_setup], graphic opregion physical addr: 0xbba8c018
>[  225.382791] [drm:intel_opregion_setup], Public ACPI methods supported
>[  225.382793] [drm:intel_opregion_setup], SWSCI supported
>[  225.382795] [drm:intel_opregion_setup], ASLE supported
>[  225.382830] [drm:init_status_page], render ring hws offset: 0x00000000
>[  225.383010] [drm:init_ring_common], render ring head not reset to zero ctl 00000000 head 00001000 tail 00000000 start 00001000
>[  225.383024] [drm:init_status_page], bsd ring hws offset: 0x00021000
>[  225.383223] [drm:drm_crtc_helper_set_mode], [CRTC:4]
>[  225.383230] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  225.383235] [drm:i915_get_crtc_scanoutpos], trying to get scanoutpos for disabled pipe B
>[  225.383239] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  225.383245] [drm:intel_update_fbc], 
>[  225.383247] [drm:intel_update_fbc], fbc set to per-chip default
>[  225.383248] [drm:intel_update_fbc], fbc disabled per module param
>[  225.383251] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  225.383254] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  225.383259] [drm:i9xx_crtc_mode_set], using SSC reference clock of 96 MHz
>[  225.383284] [drm:i9xx_crtc_mode_set], Mode for pipe B:
>[  225.383286] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  225.383589] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[  225.420063] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  225.420068] [drm:intel_update_fbc], 
>[  225.420070] [drm:intel_update_fbc], fbc set to per-chip default
>[  225.420071] [drm:intel_update_fbc], fbc disabled per module param
>[  225.436094] PM: resume of drv:hub dev:4-0:1.0 complete after 117.765 msecs
>[  225.436102] PM: resume of drv: dev:ep_00 complete after 117.768 msecs
>[  225.436107] PM: resume of drv: dev:ep_81 complete after 117.777 msecs
>[  225.436112] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  225.436115] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  225.436120] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1366x768]
>[  225.436123] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  225.436126] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  225.436140] PM: resume of drv:hub dev:5-0:1.0 complete after 117.787 msecs
>[  225.436148] PM: resume of drv: dev:ep_00 complete after 117.788 msecs
>[  225.436155] PM: resume of drv:hub dev:6-0:1.0 complete after 117.783 msecs
>[  225.436163] PM: resume of drv: dev:ep_00 complete after 117.783 msecs
>[  225.436169] PM: resume of drv:hub dev:7-0:1.0 complete after 117.778 msecs
>[  225.436177] PM: resume of drv: dev:ep_00 complete after 117.778 msecs
>[  225.436183] PM: resume of drv: dev:ep_81 complete after 117.827 msecs
>[  225.436189] PM: resume of drv: dev:ep_81 complete after 117.813 msecs
>[  225.436195] PM: resume of drv: dev:ep_81 complete after 117.800 msecs
>[  225.436633] [drm:intel_update_fbc], 
>[  225.436634] [drm:intel_update_fbc], fbc set to per-chip default
>[  225.436636] [drm:intel_update_fbc], fbc disabled per module param
>[  225.436643] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  225.436647] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  225.436659] [drm:intel_opregion_asle_intr], non asle set request??
>[  225.436807] [drm:drm_crtc_helper_set_config], 
>[  225.436809] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  225.436817] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  225.439448] PM: resume of drv:i915 dev:0000:00:02.0 complete after 138.720 msecs
>[  225.448060] PM: resume of drv: dev:ep_00 complete after 129.774 msecs
>[  225.448069] PM: resume of drv:hub dev:2-0:1.0 complete after 129.796 msecs
>[  225.448077] PM: resume of drv: dev:ep_81 complete after 129.796 msecs
>[  225.540057] PM: resume of drv:hub dev:3-0:1.0 complete after 221.755 msecs
>[  225.540074] PM: resume of drv: dev:ep_81 complete after 221.766 msecs
>[  225.540090] PM: resume of drv: dev:ep_00 complete after 221.779 msecs
>[  225.560050] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[  225.778828] PM: resume of drv:uvcvideo dev:2-4:1.1 complete after 460.364 msecs
>[  225.778835] PM: resume of drv:uvcvideo dev:2-4:1.0 complete after 460.385 msecs
>[  225.778838] PM: resume of drv: dev:ep_00 complete after 460.369 msecs
>[  225.778850] PM: resume of drv: dev:ep_82 complete after 460.392 msecs
>[  225.864078] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  225.867843] ata2.00: configured for UDMA/100
>[  225.968058] usb 3-1: reset low-speed USB device number 2 using uhci_hcd
>[  226.275327] PM: resume of drv: dev:ep_00 complete after 956.834 msecs
>[  226.275337] PM: resume of drv:usbhid dev:3-1:1.0 complete after 956.852 msecs
>[  226.275356] PM: resume of drv: dev:ep_81 complete after 956.867 msecs
>[  226.712085] PM: resume of drv:battery dev:PNP0C0A:00 complete after 1411.258 msecs
>[  228.544075] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[  228.578872] ata1.00: configured for UDMA/133
>[  228.606049] PM: resume of drv:sd dev:0:0:0:0 complete after 3287.638 msecs
>[  228.606060] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1873.977 msecs
>[  228.606072] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3287.633 msecs
>[  228.612638] PM: resume of devices complete after 3311.948 msecs
>[  228.612826] PM: resume devices took 3.312 seconds
>[  228.612866] PM: Finishing wakeup.
>[  228.612868] Restarting tasks ... done.
>[  228.724069] usb 2-5: new high-speed USB device number 12 using ehci_hcd
>[  229.123127] scsi13 : usb-storage 2-5:1.0
>[  229.220236] video LNXVIDEO:01: Restoring backlight state
>[  229.220562] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[  229.220630] [drm:drm_mode_setcrtc], [CRTC:4]
>[  229.220637] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[  229.220640] [drm:drm_crtc_helper_set_config], 
>[  229.220642] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
>[  229.220659] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  229.220669] [drm:i9xx_update_plane], Writing base 08835000 00000000 0 0 5632
>[  229.220673] [drm:intel_update_fbc], 
>[  229.220675] [drm:intel_update_fbc], fbc set to per-chip default
>[  229.220678] [drm:intel_update_fbc], fbc disabled per module param
>[  229.236190] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  229.236199] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  229.236218] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  229.236222] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  229.236229] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  229.236518] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  229.236525] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  229.244044] [drm:intel_crt_detect], CRT not detected via hotplug
>[  229.244051] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  229.244064] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  229.244068] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  229.252034] [drm:intel_crt_detect], CRT not detected via hotplug
>[  229.252041] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  229.252068] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  229.252072] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  229.252575] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  229.260614] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  229.268562] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  229.276528] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  229.276536] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  229.276550] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  229.276554] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  229.277057] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  229.284589] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  229.292567] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  229.300087] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  229.300095] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  229.300583] [drm:intel_crtc_cursor_set], 
>[  229.302011] [drm:drm_mode_addfb], [FB:33]
>[  229.315042] [drm:intel_update_fbc], 
>[  229.315048] [drm:intel_update_fbc], fbc set to per-chip default
>[  229.315050] [drm:intel_update_fbc], fbc disabled per module param
>[  229.338025] [drm:drm_mode_addfb], [FB:32]
>[  229.363198] [drm:intel_update_fbc], 
>[  229.363204] [drm:intel_update_fbc], fbc set to per-chip default
>[  229.363207] [drm:intel_update_fbc], fbc disabled per module param
>[  229.921859] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  229.929658] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  229.936544] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  229.948033] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  229.960023] [drm:intel_crt_detect], CRT not detected via hotplug
>[  229.984082] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[  229.991774] atl1c 0000:05:00.0: irq 46 for MSI/MSI-X
>[  230.049256] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[  230.122477] scsi 13:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
>[  230.123517] sd 13:0:0:0: Attached scsi generic sg2 type 0
>[  231.286237] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  231.286247] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  231.286266] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  231.286270] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  231.286279] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  231.286561] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  231.286567] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  231.300030] [drm:intel_crt_detect], CRT not detected via hotplug
>[  231.300036] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  231.300045] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  231.300049] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  231.308066] [drm:intel_crt_detect], CRT not detected via hotplug
>[  231.308073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  231.308105] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  231.308110] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  231.308614] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  231.316551] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  231.324534] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  231.332056] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  231.332065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  231.332082] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  231.332088] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  231.332593] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  231.340555] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  231.348553] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  231.356069] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  231.356078] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  231.360870] [drm:intel_crtc_cursor_set], 
>[  231.360880] [drm:intel_crtc_cursor_set], cursor off
>[  231.447826] [drm:intel_crtc_cursor_set], 
>[  231.468093] [drm:drm_mode_addfb], [FB:33]
>[  231.481312] [drm:intel_update_fbc], 
>[  231.481318] [drm:intel_update_fbc], fbc set to per-chip default
>[  231.481321] [drm:intel_update_fbc], fbc disabled per module param
>[  233.633797] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  233.633804] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  233.633821] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  233.633825] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  233.633833] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  233.634068] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  233.634073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  233.648075] [drm:intel_crt_detect], CRT not detected via hotplug
>[  233.648084] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  233.648099] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  233.648102] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  233.656038] [drm:intel_crt_detect], CRT not detected via hotplug
>[  233.656048] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  233.656091] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  233.656097] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  233.656603] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  233.664541] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  233.672562] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  233.680042] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  233.680050] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  233.680074] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  233.680078] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  233.680580] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  233.688558] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  233.696613] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  233.704030] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  233.704037] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  233.705363] [drm:intel_crtc_cursor_set], 
>[  233.705367] [drm:intel_crtc_cursor_set], cursor off
>[  233.788921] [drm:intel_crtc_cursor_set], 
>[  233.791145] [drm:drm_mode_addfb], [FB:32]
>[  233.793070] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  233.793080] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  233.793094] [drm:intel_opregion_asle_intr], non asle set request??
>[  233.827506] [drm:intel_update_fbc], 
>[  233.827514] [drm:intel_update_fbc], fbc set to per-chip default
>[  233.827518] [drm:intel_update_fbc], fbc disabled per module param
>[  234.072069] [drm:intel_update_fbc], 
>[  234.072076] [drm:intel_update_fbc], fbc set to per-chip default
>[  234.072081] [drm:intel_update_fbc], fbc disabled per module param
>[  234.072087] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  234.072092] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  234.178826] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  234.178834] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  234.200101] [drm:intel_update_fbc], 
>[  234.200106] [drm:intel_update_fbc], fbc set to per-chip default
>[  234.200109] [drm:intel_update_fbc], fbc disabled per module param
>[  234.464058] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  234.464067] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  234.464073] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  234.464106] [drm:intel_opregion_asle_intr], non asle set request??
>[  234.464166] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  234.464172] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  234.464194] [drm:intel_opregion_asle_intr], non asle set request??
>[  234.464264] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  234.464270] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  234.464280] [drm:intel_opregion_asle_intr], non asle set request??
>[  234.488071] [drm:intel_update_fbc], 
>[  234.488079] [drm:intel_update_fbc], fbc set to per-chip default
>[  234.488083] [drm:intel_update_fbc], fbc disabled per module param
>[  234.488089] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  234.488095] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  235.464069] [drm:intel_crt_detect], CRT not detected via hotplug
>[  235.464078] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[  235.464585] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  235.472555] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  235.480544] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  235.488060] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  235.488069] [drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated from 2 to 2
>[  237.219246] sd 13:0:0:0: [sdb] Attached SCSI removable disk
>[  240.892099] usb 2-5: USB disconnect, device number 12
>[  242.390593] PM: Syncing filesystems ... done.
>[  242.398148] PM: Preparing system for mem sleep
>[  242.398288] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  242.398292] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  242.420061] [drm:intel_update_fbc], 
>[  242.420068] [drm:intel_update_fbc], fbc set to per-chip default
>[  242.420071] [drm:intel_update_fbc], fbc disabled per module param
>[  242.428049] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  242.428056] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  242.428059] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  242.428070] [drm:intel_opregion_asle_intr], non asle set request??
>[  242.428128] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  242.428132] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  242.428137] [drm:intel_opregion_asle_intr], non asle set request??
>[  242.428186] [drm:intel_crtc_cursor_set], 
>[  242.428189] [drm:intel_crtc_cursor_set], cursor off
>[  242.800396] [drm:drm_crtc_helper_set_config], 
>[  242.800400] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[  242.800408] [drm:drm_crtc_helper_set_config], 
>[  242.800409] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  242.800420] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  242.800431] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  242.800434] [drm:intel_update_fbc], 
>[  242.800436] [drm:intel_update_fbc], fbc set to per-chip default
>[  242.800438] [drm:intel_update_fbc], fbc disabled per module param
>[  242.816063] [drm:drm_crtc_helper_set_config], 
>[  242.816065] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  242.816071] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  242.816171] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[  242.832095] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[  242.848090] PM: Entering mem sleep
>[  242.848145] Suspending console(s) (use no_console_suspend to debug)
>[  242.849141] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  242.849334] sd 0:0:0:0: [sda] Stopping disk
>[  242.990338] PM: suspend of drv:psmouse dev:serio1 complete after 141.140 msecs
>[  243.004197] uhci_hcd 0000:00:1a.0: PCI INT A disabled
>[  243.004619] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe A
>[  243.020060] ehci_hcd 0000:00:1d.7: PCI INT A disabled
>[  243.040087] uhci_hcd 0000:00:1d.0: PCI INT A disabled
>[  243.040103] uhci_hcd 0000:00:1d.2: PCI INT D disabled
>[  243.040115] uhci_hcd 0000:00:1d.1: PCI INT B disabled
>[  243.040146] uhci_hcd 0000:00:1d.3: PCI INT C disabled
>[  243.068053] ehci_hcd 0000:00:1a.7: PCI INT D disabled
>[  243.312456] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
>[  243.328064] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 323.894 msecs
>[  243.426508] PM: suspend of drv:sd dev:0:0:0:0 complete after 577.375 msecs
>[  243.426530] PM: suspend of drv:scsi dev:target0:0:0 complete after 577.386 msecs
>[  243.426556] PM: suspend of drv:scsi dev:host0 complete after 423.060 msecs
>[  243.440069] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 435.952 msecs
>[  243.440081] PM: suspend of drv: dev:pci0000:00 complete after 435.875 msecs
>[  243.440087] PM: suspend of devices complete after 591.652 msecs
>[  243.440089] PM: suspend devices took 0.592 seconds
>[  243.472799] ehci_hcd 0000:00:1d.7: PME# enabled
>[  243.472813] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[  243.488786] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[  243.489712] ehci_hcd 0000:00:1a.7: PME# enabled
>[  243.489716] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[  243.504305] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[  243.505027] PM: late suspend of devices complete after 64.940 msecs
>[  243.505166] ACPI: Preparing to enter system sleep state S3
>[  243.505340] PM: Saving platform NVS memory
>[  243.505858] Disabling non-boot CPUs ...
>[  243.608142] CPU 1 is now offline
>[  243.608628] ACPI: Low-level resume complete
>[  243.608628] PM: Restoring platform NVS memory
>[  243.608628] CPU0: Thermal monitoring handled by SMI
>[  243.608628] Enabling non-boot CPUs ...
>[  243.608628] Booting Node 0 Processor 1 APIC 0x1
>[  243.608628] smpboot cpu 1: start_ip = 99000
>[  243.507671] Calibrating delay loop (skipped) already calibrated this CPU
>[  243.633943] NMI watchdog enabled, takes one hw-pmu counter.
>[  243.638050] CPU1 is up
>[  243.639485] ACPI: Waking up from system sleep state S3
>[  243.642265] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
>[  243.642271] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
>[  243.642328] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  243.642353] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[  243.642392] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[  243.642411] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[  243.642416] ehci_hcd 0000:00:1a.7: PME# disabled
>[  243.642434] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[  243.642452] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  243.642458] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[  243.642486] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[  243.642497] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd131d041)
>[  243.642502] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd660d570)
>[  243.642514] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100001, writing 0x100407)
>[  243.642558] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[  243.642568] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xd231d141)
>[  243.642573] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd560d460)
>[  243.642585] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[  243.642628] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[  243.642639] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xd331d241)
>[  243.642644] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xd450d350)
>[  243.642656] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[  243.642713] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  243.642735] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[  243.642764] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  243.642802] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  243.642839] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  243.642884] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[  243.642903] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[  243.642908] ehci_hcd 0000:00:1d.7: PME# disabled
>[  243.642926] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>[  243.642930] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
>[  243.642935] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
>[  243.642945] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>[  243.643027] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
>[  243.643123] ath9k 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  243.643684] PM: early resume of devices complete after 1.594 msecs
>[  243.643790] i915 0000:00:02.0: setting latency timer to 64
>[  243.644140] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[  243.644146] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[  243.644171] usb usb3: root hub lost power or was reset
>[  243.644188] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
>[  243.644195] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[  243.644224] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[  243.644229] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>[  243.644276] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[  243.644330] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  243.644336] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[  243.644360] usb usb4: root hub lost power or was reset
>[  243.644373] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[  243.644379] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[  243.644403] usb usb5: root hub lost power or was reset
>[  243.644416] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
>[  243.644422] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[  243.644446] usb usb6: root hub lost power or was reset
>[  243.644459] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[  243.644465] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[  243.644489] usb usb7: root hub lost power or was reset
>[  243.644503] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  243.644509] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[  243.644532] pci 0000:00:1e.0: setting latency timer to 64
>[  243.644549] ahci 0000:00:1f.2: setting latency timer to 64
>[  243.661471] sd 0:0:0:0: [sda] Starting disk
>[  243.725956] [drm:intel_opregion_setup], graphic opregion physical addr: 0xbba8c018
>[  243.726022] [drm:intel_opregion_setup], Public ACPI methods supported
>[  243.726024] [drm:intel_opregion_setup], SWSCI supported
>[  243.726026] [drm:intel_opregion_setup], ASLE supported
>[  243.726057] [drm:init_status_page], render ring hws offset: 0x00000000
>[  243.726239] [drm:init_ring_common], render ring head not reset to zero ctl 00000000 head 00001000 tail 00000000 start 00001000
>[  243.726253] [drm:init_status_page], bsd ring hws offset: 0x00021000
>[  243.726450] [drm:drm_crtc_helper_set_mode], [CRTC:4]
>[  243.726457] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  243.726461] [drm:i915_get_crtc_scanoutpos], trying to get scanoutpos for disabled pipe B
>[  243.726465] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  243.726471] [drm:intel_update_fbc], 
>[  243.726472] [drm:intel_update_fbc], fbc set to per-chip default
>[  243.726474] [drm:intel_update_fbc], fbc disabled per module param
>[  243.726477] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  243.726479] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  243.726485] [drm:i9xx_crtc_mode_set], using SSC reference clock of 96 MHz
>[  243.726510] [drm:i9xx_crtc_mode_set], Mode for pipe B:
>[  243.726513] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  243.726816] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[  243.764061] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  243.764065] [drm:intel_update_fbc], 
>[  243.764066] [drm:intel_update_fbc], fbc set to per-chip default
>[  243.764068] [drm:intel_update_fbc], fbc disabled per module param
>[  243.780086] PM: resume of drv:hub dev:7-0:1.0 complete after 118.630 msecs
>[  243.780093] PM: resume of drv: dev:ep_00 complete after 118.630 msecs
>[  243.780098] PM: resume of drv: dev:ep_81 complete after 118.641 msecs
>[  243.780103] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  243.780107] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  243.780112] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1366x768]
>[  243.780115] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  243.780118] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  243.780138] PM: resume of drv:hub dev:6-0:1.0 complete after 118.703 msecs
>[  243.780147] PM: resume of drv: dev:ep_00 complete after 118.704 msecs
>[  243.780153] PM: resume of drv:hub dev:4-0:1.0 complete after 118.765 msecs
>[  243.780161] PM: resume of drv: dev:ep_00 complete after 118.760 msecs
>[  243.780167] PM: resume of drv:hub dev:5-0:1.0 complete after 118.752 msecs
>[  243.780174] PM: resume of drv: dev:ep_00 complete after 118.750 msecs
>[  243.780180] PM: resume of drv: dev:ep_81 complete after 118.742 msecs
>[  243.780186] PM: resume of drv: dev:ep_81 complete after 118.790 msecs
>[  243.780192] PM: resume of drv: dev:ep_81 complete after 118.773 msecs
>[  243.780628] [drm:intel_update_fbc], 
>[  243.780630] [drm:intel_update_fbc], fbc set to per-chip default
>[  243.780632] [drm:intel_update_fbc], fbc disabled per module param
>[  243.780638] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  243.780642] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  243.780654] [drm:intel_opregion_asle_intr], non asle set request??
>[  243.780798] [drm:drm_crtc_helper_set_config], 
>[  243.780801] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  243.780809] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  243.783439] PM: resume of drv:i915 dev:0000:00:02.0 complete after 139.657 msecs
>[  243.792058] PM: resume of drv: dev:ep_00 complete after 130.881 msecs
>[  243.792069] PM: resume of drv:hub dev:2-0:1.0 complete after 130.904 msecs
>[  243.792078] PM: resume of drv: dev:ep_81 complete after 130.910 msecs
>[  243.884081] PM: resume of drv: dev:ep_00 complete after 222.764 msecs
>[  243.884091] PM: resume of drv:hub dev:3-0:1.0 complete after 222.874 msecs
>[  243.884112] PM: resume of drv: dev:ep_81 complete after 222.829 msecs
>[  243.904051] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[  244.122839] PM: resume of drv:uvcvideo dev:2-4:1.1 complete after 461.312 msecs
>[  244.122846] PM: resume of drv:uvcvideo dev:2-4:1.0 complete after 461.331 msecs
>[  244.122849] PM: resume of drv: dev:ep_00 complete after 461.317 msecs
>[  244.122857] PM: resume of drv: dev:ep_82 complete after 461.340 msecs
>[  244.208053] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  244.211771] ata2.00: configured for UDMA/100
>[  244.312074] usb 3-1: reset low-speed USB device number 2 using uhci_hcd
>[  244.619214] PM: resume of drv: dev:ep_00 complete after 957.656 msecs
>[  244.619224] PM: resume of drv:usbhid dev:3-1:1.0 complete after 957.674 msecs
>[  244.619243] PM: resume of drv: dev:ep_81 complete after 957.689 msecs
>[  245.064084] PM: resume of drv:battery dev:PNP0C0A:00 complete after 1420.205 msecs
>[  246.832060] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[  246.861118] ata1.00: configured for UDMA/133
>[  246.888279] PM: resume of drv:sd dev:0:0:0:0 complete after 3226.809 msecs
>[  246.888290] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1808.257 msecs
>[  246.888303] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3226.803 msecs
>[  246.894965] PM: resume of devices complete after 3251.220 msecs
>[  246.895151] PM: resume devices took 3.252 seconds
>[  246.895192] PM: Finishing wakeup.
>[  246.895193] Restarting tasks ... done.
>[  247.004079] usb 2-5: new high-speed USB device number 13 using ehci_hcd
>[  247.162643] scsi14 : usb-storage 2-5:1.0
>[  247.508221] video LNXVIDEO:01: Restoring backlight state
>[  247.508639] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[  247.508709] [drm:drm_mode_setcrtc], [CRTC:4]
>[  247.508717] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[  247.508720] [drm:drm_crtc_helper_set_config], 
>[  247.508722] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
>[  247.508732] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  247.508742] [drm:i9xx_update_plane], Writing base 0094E000 00000000 0 0 5632
>[  247.508746] [drm:intel_update_fbc], 
>[  247.508748] [drm:intel_update_fbc], fbc set to per-chip default
>[  247.508750] [drm:intel_update_fbc], fbc disabled per module param
>[  247.516157] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  247.516165] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  247.516182] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  247.516185] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  247.516191] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  247.516448] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  247.516455] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  247.524037] [drm:intel_crt_detect], CRT not detected via hotplug
>[  247.524046] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  247.524062] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  247.524066] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  247.532061] [drm:intel_crt_detect], CRT not detected via hotplug
>[  247.532068] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  247.532097] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  247.532101] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  247.532604] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  247.540552] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  247.548545] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  247.556048] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  247.556059] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  247.556071] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  247.556074] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  247.556576] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  247.564542] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  247.572545] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  247.580046] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  247.580050] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  247.581365] [drm:intel_crtc_cursor_set], 
>[  247.584888] [drm:drm_mode_addfb], [FB:34]
>[  247.610146] [drm:intel_update_fbc], 
>[  247.610152] [drm:intel_update_fbc], fbc set to per-chip default
>[  247.610154] [drm:intel_update_fbc], fbc disabled per module param
>[  247.610242] [drm:drm_mode_addfb], [FB:32]
>[  247.626577] [drm:intel_update_fbc], 
>[  247.626585] [drm:intel_update_fbc], fbc set to per-chip default
>[  247.626587] [drm:intel_update_fbc], fbc disabled per module param
>[  248.163965] scsi 14:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
>[  248.165301] sd 14:0:0:0: Attached scsi generic sg2 type 0
>[  248.255647] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  248.261699] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  248.268553] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  248.278552] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  248.293848] [drm:intel_crt_detect], CRT not detected via hotplug
>[  248.320043] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[  248.339228] atl1c 0000:05:00.0: irq 46 for MSI/MSI-X
>[  248.396759] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[  249.695332] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  249.695339] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  249.695355] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  249.695358] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  249.695364] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  249.695584] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  249.695589] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  249.708051] [drm:intel_crt_detect], CRT not detected via hotplug
>[  249.708061] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  249.708076] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  249.708082] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  249.716070] [drm:intel_crt_detect], CRT not detected via hotplug
>[  249.716078] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  249.716115] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  249.716122] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  249.716627] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  249.724538] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  249.732536] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  249.740057] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  249.740066] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  249.740084] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  249.740089] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  249.740594] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  249.748548] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  249.756554] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  249.764066] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  249.764074] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  249.768530] [drm:intel_crtc_cursor_set], 
>[  249.768539] [drm:intel_crtc_cursor_set], cursor off
>[  249.856395] [drm:intel_crtc_cursor_set], 
>[  249.876834] [drm:drm_mode_addfb], [FB:34]
>[  249.888738] [drm:intel_update_fbc], 
>[  249.888744] [drm:intel_update_fbc], fbc set to per-chip default
>[  249.888746] [drm:intel_update_fbc], fbc disabled per module param
>[  253.800067] [drm:intel_crt_detect], CRT not detected via hotplug
>[  253.800077] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[  253.800585] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  253.808558] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  253.816528] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  253.824055] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  253.824066] [drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated from 2 to 2
>[  255.268139] sd 14:0:0:0: [sdb] Attached SCSI removable disk
>[  257.701574] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  257.701586] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  257.701612] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  257.701618] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  257.701630] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  257.702014] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  257.702022] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  257.712072] [drm:intel_crt_detect], CRT not detected via hotplug
>[  257.712081] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  257.712095] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  257.712100] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  257.720069] [drm:intel_crt_detect], CRT not detected via hotplug
>[  257.720077] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  257.720097] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  257.720103] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  257.720610] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  257.728533] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  257.736535] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  257.744052] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  257.744061] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  257.744085] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  257.744091] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  257.744596] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  257.752538] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  257.760567] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  257.768106] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  257.768116] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  257.770250] [drm:intel_crtc_cursor_set], 
>[  257.770256] [drm:intel_crtc_cursor_set], cursor off
>[  257.856030] [drm:intel_crtc_cursor_set], 
>[  257.857863] [drm:drm_mode_addfb], [FB:32]
>[  257.868153] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  257.868161] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  257.868174] [drm:intel_opregion_asle_intr], non asle set request??
>[  257.879918] [drm:intel_update_fbc], 
>[  257.879926] [drm:intel_update_fbc], fbc set to per-chip default
>[  257.879930] [drm:intel_update_fbc], fbc disabled per module param
>[  258.140066] [drm:intel_update_fbc], 
>[  258.140072] [drm:intel_update_fbc], fbc set to per-chip default
>[  258.140076] [drm:intel_update_fbc], fbc disabled per module param
>[  258.140082] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  258.140087] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  258.140395] [drm:drm_mode_addfb], [FB:34]
>[  258.244534] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  258.244542] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  258.268145] [drm:intel_update_fbc], 
>[  258.268150] [drm:intel_update_fbc], fbc set to per-chip default
>[  258.268153] [drm:intel_update_fbc], fbc disabled per module param
>[  258.556071] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  258.556081] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  258.556091] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  258.556105] [drm:intel_opregion_asle_intr], non asle set request??
>[  258.556199] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  258.556206] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  258.556215] [drm:intel_opregion_asle_intr], non asle set request??
>[  258.556313] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  258.556320] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  258.556329] [drm:intel_opregion_asle_intr], non asle set request??
>[  258.588070] [drm:intel_update_fbc], 
>[  258.588078] [drm:intel_update_fbc], fbc set to per-chip default
>[  258.588082] [drm:intel_update_fbc], fbc disabled per module param
>[  258.588089] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  258.588094] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  258.940129] usb 2-5: USB disconnect, device number 13
>[  260.697689] PM: Syncing filesystems ... done.
>[  260.705473] PM: Preparing system for mem sleep
>[  260.705593] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  260.705597] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  260.728067] [drm:intel_update_fbc], 
>[  260.728072] [drm:intel_update_fbc], fbc set to per-chip default
>[  260.728075] [drm:intel_update_fbc], fbc disabled per module param
>[  260.736032] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  260.736037] [drm:intel_panel_actually_set_backlight], set backlight PWM = 2948310
>[  260.736040] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  260.736052] [drm:intel_opregion_asle_intr], non asle set request??
>[  260.736100] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  260.736104] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  260.736111] [drm:intel_opregion_asle_intr], non asle set request??
>[  260.736149] [drm:intel_crtc_cursor_set], 
>[  260.736152] [drm:intel_crtc_cursor_set], cursor off
>[  261.144267] [drm:drm_crtc_helper_set_config], 
>[  261.144272] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[  261.144279] [drm:drm_crtc_helper_set_config], 
>[  261.144281] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  261.144290] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  261.144296] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  261.144300] [drm:intel_update_fbc], 
>[  261.144301] [drm:intel_update_fbc], fbc set to per-chip default
>[  261.144303] [drm:intel_update_fbc], fbc disabled per module param
>[  261.160057] [drm:drm_crtc_helper_set_config], 
>[  261.160059] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  261.160063] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  261.160159] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[  261.176073] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[  261.192084] PM: Entering mem sleep
>[  261.192141] Suspending console(s) (use no_console_suspend to debug)
>[  261.193166] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  261.193371] sd 0:0:0:0: [sda] Stopping disk
>[  261.338602] PM: suspend of drv:psmouse dev:serio1 complete after 145.385 msecs
>[  261.352484] uhci_hcd 0000:00:1a.0: PCI INT A disabled
>[  261.352906] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe A
>[  261.388089] uhci_hcd 0000:00:1d.3: PCI INT C disabled
>[  261.388101] uhci_hcd 0000:00:1d.0: PCI INT A disabled
>[  261.388114] uhci_hcd 0000:00:1d.2: PCI INT D disabled
>[  261.388133] uhci_hcd 0000:00:1d.1: PCI INT B disabled
>[  261.392031] ehci_hcd 0000:00:1d.7: PCI INT A disabled
>[  261.416066] ehci_hcd 0000:00:1a.7: PCI INT D disabled
>[  261.660490] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
>[  261.676063] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 323.612 msecs
>[  261.771396] PM: suspend of drv:sd dev:0:0:0:0 complete after 578.237 msecs
>[  261.771419] PM: suspend of drv:scsi dev:target0:0:0 complete after 578.229 msecs
>[  261.771440] PM: suspend of drv:scsi dev:host0 complete after 419.656 msecs
>[  261.784065] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 431.660 msecs
>[  261.784078] PM: suspend of drv: dev:pci0000:00 complete after 431.084 msecs
>[  261.784096] PM: suspend of devices complete after 591.651 msecs
>[  261.784098] PM: suspend devices took 0.592 seconds
>[  261.816821] ehci_hcd 0000:00:1d.7: PME# enabled
>[  261.816831] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
>[  261.832831] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
>[  261.833789] ehci_hcd 0000:00:1a.7: PME# enabled
>[  261.833793] ehci_hcd 0000:00:1a.7: wake-up capability enabled by ACPI
>[  261.848304] uhci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
>[  261.849120] PM: late suspend of devices complete after 65.019 msecs
>[  261.849255] ACPI: Preparing to enter system sleep state S3
>[  261.849404] PM: Saving platform NVS memory
>[  261.849891] Disabling non-boot CPUs ...
>[  261.952100] CPU 1 is now offline
>[  261.952580] ACPI: Low-level resume complete
>[  261.952580] PM: Restoring platform NVS memory
>[  261.952580] CPU0: Thermal monitoring handled by SMI
>[  261.952580] Enabling non-boot CPUs ...
>[  261.952580] Booting Node 0 Processor 1 APIC 0x1
>[  261.952580] smpboot cpu 1: start_ip = 99000
>[  261.851595] Calibrating delay loop (skipped) already calibrated this CPU
>[  261.978546] NMI watchdog enabled, takes one hw-pmu counter.
>[  261.982928] CPU1 is up
>[  261.984389] ACPI: Waking up from system sleep state S3
>[  261.987172] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
>[  261.987178] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
>[  261.987234] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  261.987260] uhci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
>[  261.987299] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[  261.987318] ehci_hcd 0000:00:1a.7: wake-up capability disabled by ACPI
>[  261.987323] ehci_hcd 0000:00:1a.7: PME# disabled
>[  261.987341] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[  261.987359] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  261.987365] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
>[  261.987394] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
>[  261.987404] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd131d041)
>[  261.987409] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd660d570)
>[  261.987421] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100001, writing 0x100407)
>[  261.987465] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
>[  261.987475] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xd231d141)
>[  261.987480] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xd560d460)
>[  261.987492] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[  261.987535] pcieport 0000:00:1c.2: restoring config space at offset 0xf (was 0x300, writing 0x30b)
>[  261.987546] pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xd331d241)
>[  261.987550] pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0x0, writing 0xd450d350)
>[  261.987562] pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
>[  261.987619] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  261.987642] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
>[  261.987671] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  261.987709] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  261.987745] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
>[  261.987791] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
>[  261.987810] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
>[  261.987814] ehci_hcd 0000:00:1d.7: PME# disabled
>[  261.987832] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
>[  261.987836] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
>[  261.987841] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
>[  261.987851] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
>[  261.987933] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
>[  261.988051] ath9k 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
>[  261.988613] PM: early resume of devices complete after 1.613 msecs
>[  261.988715] i915 0000:00:02.0: setting latency timer to 64
>[  261.988905] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
>[  261.988912] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[  261.988937] usb usb3: root hub lost power or was reset
>[  261.989072] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 21 (level, low) -> IRQ 21
>[  261.989079] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>[  261.989108] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>[  261.989114] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
>[  261.989160] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>[  261.989212] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  261.989218] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[  261.989242] usb usb4: root hub lost power or was reset
>[  261.989256] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>[  261.989261] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[  261.989285] usb usb5: root hub lost power or was reset
>[  261.989299] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 20 (level, low) -> IRQ 20
>[  261.989305] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[  261.989329] usb usb6: root hub lost power or was reset
>[  261.989341] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>[  261.989347] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[  261.989371] usb usb7: root hub lost power or was reset
>[  261.989385] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
>[  261.989391] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[  261.989414] pci 0000:00:1e.0: setting latency timer to 64
>[  261.989430] ahci 0000:00:1f.2: setting latency timer to 64
>[  262.006358] sd 0:0:0:0: [sda] Starting disk
>[  262.070997] [drm:intel_opregion_setup], graphic opregion physical addr: 0xbba8c018
>[  262.071063] [drm:intel_opregion_setup], Public ACPI methods supported
>[  262.071065] [drm:intel_opregion_setup], SWSCI supported
>[  262.071067] [drm:intel_opregion_setup], ASLE supported
>[  262.071103] [drm:init_status_page], render ring hws offset: 0x00000000
>[  262.071282] [drm:init_ring_common], render ring head not reset to zero ctl 00000000 head 00001000 tail 00000000 start 00001000
>[  262.071295] [drm:init_status_page], bsd ring hws offset: 0x00021000
>[  262.071490] [drm:drm_crtc_helper_set_mode], [CRTC:4]
>[  262.071497] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  262.071501] [drm:i915_get_crtc_scanoutpos], trying to get scanoutpos for disabled pipe B
>[  262.071505] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  262.071511] [drm:intel_update_fbc], 
>[  262.071513] [drm:intel_update_fbc], fbc set to per-chip default
>[  262.071514] [drm:intel_update_fbc], fbc disabled per module param
>[  262.071517] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  262.071520] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  262.071525] [drm:i9xx_crtc_mode_set], using SSC reference clock of 96 MHz
>[  262.071550] [drm:i9xx_crtc_mode_set], Mode for pipe B:
>[  262.071553] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  262.071855] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[  262.108063] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  262.108067] [drm:intel_update_fbc], 
>[  262.108069] [drm:intel_update_fbc], fbc set to per-chip default
>[  262.108071] [drm:intel_update_fbc], fbc disabled per module param
>[  262.124092] PM: resume of drv:hub dev:4-0:1.0 complete after 117.813 msecs
>[  262.124100] PM: resume of drv: dev:ep_00 complete after 117.811 msecs
>[  262.124106] PM: resume of drv: dev:ep_81 complete after 117.825 msecs
>[  262.124111] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  262.124113] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  262.124118] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1366x768]
>[  262.124121] [drm:g4x_check_srwm], SR watermark: display plane 59, cursor 6
>[  262.124124] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=26, cursor=6, SR: plane=59, cursor=6
>[  262.124139] PM: resume of drv:hub dev:5-0:1.0 complete after 117.835 msecs
>[  262.124148] PM: resume of drv: dev:ep_00 complete after 117.836 msecs
>[  262.124154] PM: resume of drv:hub dev:6-0:1.0 complete after 117.831 msecs
>[  262.124162] PM: resume of drv: dev:ep_00 complete after 117.831 msecs
>[  262.124168] PM: resume of drv:hub dev:7-0:1.0 complete after 117.827 msecs
>[  262.124176] PM: resume of drv: dev:ep_00 complete after 117.826 msecs
>[  262.124182] PM: resume of drv: dev:ep_81 complete after 117.875 msecs
>[  262.124188] PM: resume of drv: dev:ep_81 complete after 117.861 msecs
>[  262.124195] PM: resume of drv: dev:ep_81 complete after 117.849 msecs
>[  262.124630] [drm:intel_update_fbc], 
>[  262.124632] [drm:intel_update_fbc], fbc set to per-chip default
>[  262.124634] [drm:intel_update_fbc], fbc disabled per module param
>[  262.124639] [drm:intel_panel_actually_set_backlight], set backlight PWM = 9
>[  262.124643] [drm:intel_panel_get_max_backlight], max backlight PWM = 2948310
>[  262.124653] [drm:intel_opregion_asle_intr], non asle set request??
>[  262.124797] [drm:drm_crtc_helper_set_config], 
>[  262.124799] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  262.124806] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  262.127437] PM: resume of drv:i915 dev:0000:00:02.0 complete after 138.731 msecs
>[  262.136058] PM: resume of drv: dev:ep_00 complete after 129.823 msecs
>[  262.136070] PM: resume of drv:hub dev:2-0:1.0 complete after 129.846 msecs
>[  262.136079] PM: resume of drv: dev:ep_81 complete after 129.851 msecs
>[  262.228057] PM: resume of drv:hub dev:3-0:1.0 complete after 221.805 msecs
>[  262.228079] PM: resume of drv: dev:ep_81 complete after 221.824 msecs
>[  262.228088] PM: resume of drv: dev:ep_00 complete after 221.825 msecs
>[  262.248049] usb 2-4: reset high-speed USB device number 2 using ehci_hcd
>[  262.466779] PM: resume of drv:uvcvideo dev:2-4:1.1 complete after 460.362 msecs
>[  262.466785] PM: resume of drv:uvcvideo dev:2-4:1.0 complete after 460.381 msecs
>[  262.466788] PM: resume of drv: dev:ep_00 complete after 460.367 msecs
>[  262.466796] PM: resume of drv: dev:ep_82 complete after 460.385 msecs
>[  262.552054] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  262.555779] ata2.00: configured for UDMA/100
>[  262.656078] usb 3-1: reset low-speed USB device number 2 using uhci_hcd
>[  262.963278] PM: resume of drv: dev:ep_00 complete after 956.832 msecs
>[  262.963288] PM: resume of drv:usbhid dev:3-1:1.0 complete after 956.849 msecs
>[  262.963312] PM: resume of drv: dev:ep_81 complete after 956.870 msecs
>[  263.404083] PM: resume of drv:battery dev:PNP0C0A:00 complete after 1415.279 msecs
>[  265.400057] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[  265.431646] ata1.00: configured for UDMA/133
>[  265.458817] PM: resume of drv:sd dev:0:0:0:0 complete after 3452.459 msecs
>[  265.458828] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2034.208 msecs
>[  265.458840] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3452.450 msecs
>[  265.465524] PM: resume of devices complete after 3476.854 msecs
>[  265.465712] PM: resume devices took 3.476 seconds
>[  265.465751] PM: Finishing wakeup.
>[  265.465752] Restarting tasks ... done.
>[  265.576084] usb 2-5: new high-speed USB device number 14 using ehci_hcd
>[  265.734947] scsi15 : usb-storage 2-5:1.0
>[  266.076218] video LNXVIDEO:01: Restoring backlight state
>[  266.076551] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
>[  266.076621] [drm:drm_mode_setcrtc], [CRTC:4]
>[  266.076629] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[  266.076632] [drm:drm_crtc_helper_set_config], 
>[  266.076634] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:32] #connectors=1 (x y) (0 0)
>[  266.076645] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  266.076654] [drm:i9xx_update_plane], Writing base 031E9000 00000000 0 0 5632
>[  266.076659] [drm:intel_update_fbc], 
>[  266.076661] [drm:intel_update_fbc], fbc set to per-chip default
>[  266.076663] [drm:intel_update_fbc], fbc disabled per module param
>[  266.084175] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  266.084181] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  266.084195] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  266.084198] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  266.084204] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  266.084420] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  266.084425] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  266.092037] [drm:intel_crt_detect], CRT not detected via hotplug
>[  266.092045] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  266.092060] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  266.092063] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  266.100038] [drm:intel_crt_detect], CRT not detected via hotplug
>[  266.100046] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  266.100074] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  266.100078] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  266.100581] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  266.108552] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  266.116556] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  266.128099] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  266.128110] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  266.128126] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  266.128130] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  266.128636] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  266.136608] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  266.144535] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  266.152104] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  266.152113] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  266.152656] [drm:intel_crtc_cursor_set], 
>[  266.158259] [drm:drm_mode_addfb], [FB:35]
>[  266.179819] [drm:intel_update_fbc], 
>[  266.179824] [drm:intel_update_fbc], fbc set to per-chip default
>[  266.179826] [drm:intel_update_fbc], fbc disabled per module param
>[  266.734596] scsi 15:0:0:0: Direct-Access     Generic- Multi-Card       1.00 PQ: 0 ANSI: 0 CCS
>[  266.735625] sd 15:0:0:0: Attached scsi generic sg2 type 0
>[  266.788701] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  266.796964] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  266.806489] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  266.812032] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  266.820032] [drm:intel_crt_detect], CRT not detected via hotplug
>[  266.851637] ADDRCONF(NETDEV_UP): wlan0: link is not ready
>[  266.858497] atl1c 0000:05:00.0: irq 46 for MSI/MSI-X
>[  266.916786] ADDRCONF(NETDEV_UP): eth0: link is not ready
>[  268.188287] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  268.188296] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[  268.188311] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[  268.188315] [drm:drm_mode_debug_printmodeline], Modeline 17:"1366x768" 60 75460 1366 1426 1466 1576 768 771 777 798 0x48 0xa
>[  268.188322] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[  268.188559] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  268.188563] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  268.200064] [drm:intel_crt_detect], CRT not detected via hotplug
>[  268.200074] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  268.200090] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[  268.200096] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[  268.208068] [drm:intel_crt_detect], CRT not detected via hotplug
>[  268.208076] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[  268.208097] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  268.208103] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  268.208610] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  268.216537] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  268.224534] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  268.232054] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  268.232063] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  268.232086] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
>[  268.232091] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1]
>[  268.232595] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  268.240560] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  268.248557] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  268.256069] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  268.256077] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:DP-1] disconnected
>[  268.259355] [drm:intel_crtc_cursor_set], 
>[  268.259362] [drm:intel_crtc_cursor_set], cursor off
>[  268.341243] [drm:intel_crtc_cursor_set], 
>[  272.168063] [drm:intel_crt_detect], CRT not detected via hotplug
>[  272.168072] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
>[  272.168579] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  272.176560] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  272.184555] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450064
>[  272.192048] [drm:intel_dp_detect], DPCD: 0000000000000000
>[  272.192056] [drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated from 2 to 2
>[  273.838702] sd 15:0:0:0: [sdb] Attached SCSI removable disk
>[  277.400327] usb 2-5: USB disconnect, device number 14
>[  280.825579] [drm:intel_crtc_cursor_set], 
>[  280.825586] [drm:intel_crtc_cursor_set], cursor off
>[  280.944390] [drm:drm_crtc_helper_set_config], 
>[  280.944396] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
>[  280.944407] [drm:drm_crtc_helper_set_config], 
>[  280.944409] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  280.944422] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  280.944431] [drm:i9xx_update_plane], Writing base 00042000 00000000 0 0 5504
>[  280.944438] [drm:intel_update_fbc], 
>[  280.944441] [drm:intel_update_fbc], fbc set to per-chip default
>[  280.944444] [drm:intel_update_fbc], fbc disabled per module param
>[  280.960082] [drm:drm_crtc_helper_set_config], 
>[  280.960085] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  280.960094] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
>[  280.960110] [drm:drm_crtc_helper_set_config], 
>[  280.960112] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
>[  280.960120] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]

Actions: View

Attachments on bug 50227: 61993 | 61994 | 62482 | 62483 | 66517 | 66518

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.