Attachment 67258 Details for Bug 26891 – dmesg output from failing loading of radeon driver in 3.6.0_rc3

dmesg output from failing loading of radeon driver in 3.6.0_rc3

dmesg.log (text/plain), 91.18 KB, created by Moritz Schlarb on 2012-09-16 21:43:50 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Moritz Schlarb

Created: 2012-09-16 21:43:50 UTC

Size: 91.18 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Linux version 3.6.0-rc3-efifb-radeonkms-gmux (root@ilarry) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #2 SMP Sun Sep 16 23:21:50 CEST 2012
>[    0.000000] Disabled fast string operations
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] usable
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f0c9fff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007f0ca000-0x000000007f2cafff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007f2cb000-0x000000007fe4afff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007fe4b000-0x000000007fe6efff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000007fe6f000-0x000000007fe7efff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007fe7f000-0x000000007feaafff] reserved
>[    0.000000] BIOS-e820: [mem 0x000000007feab000-0x000000007feb1fff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007feb2000-0x000000007feb7fff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000007feb8000-0x000000007feb8fff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007feb9000-0x000000007feeefff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000007feef000-0x000000007feeffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000007fef0000-0x000000007fefefff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x000000007feff000-0x000000007fefffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fffb0000-0x00000000fffdffff] reserved
>[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
>[    0.000000] efi: EFI v1.10 by Apple
>[    0.000000] efi:  ACPI=0x7fefd000  ACPI 2.0=0x7fefd014  SMBIOS=0x7feba000 
>[    0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000008f000) (0MB)
>[    0.000000] efi: mem01: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB)
>[    0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB)
>[    0.000000] efi: mem03: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000dc2000) (12MB)
>[    0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000dc2000-0x000000005c9e8000) (1468MB)
>[    0.000000] efi: mem05: type=2, attr=0xf, range=[0x000000005c9e8000-0x000000007c1f5000) (504MB)
>[    0.000000] efi: mem06: type=4, attr=0xf, range=[0x000000007c1f5000-0x000000007c23d000) (0MB)
>[    0.000000] efi: mem07: type=7, attr=0xf, range=[0x000000007c23d000-0x000000007cfa0000) (13MB)
>[    0.000000] efi: mem08: type=1, attr=0xf, range=[0x000000007cfa0000-0x000000007d021000) (0MB)
>[    0.000000] efi: mem09: type=2, attr=0xf, range=[0x000000007d021000-0x000000007d091000) (0MB)
>[    0.000000] efi: mem10: type=7, attr=0xf, range=[0x000000007d091000-0x000000007d094000) (0MB)
>[    0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000007d094000-0x000000007d097000) (0MB)
>[    0.000000] efi: mem12: type=7, attr=0xf, range=[0x000000007d097000-0x000000007d098000) (0MB)
>[    0.000000] efi: mem13: type=2, attr=0xf, range=[0x000000007d098000-0x000000007d0dc000) (0MB)
>[    0.000000] efi: mem14: type=1, attr=0xf, range=[0x000000007d0dc000-0x000000007d0f4000) (0MB)
>[    0.000000] efi: mem15: type=7, attr=0xf, range=[0x000000007d0f4000-0x000000007e1b5000) (16MB)
>[    0.000000] efi: mem16: type=4, attr=0xf, range=[0x000000007e1b5000-0x000000007ecea000) (11MB)
>[    0.000000] efi: mem17: type=7, attr=0xf, range=[0x000000007ecea000-0x000000007eda7000) (0MB)
>[    0.000000] efi: mem18: type=4, attr=0xf, range=[0x000000007eda7000-0x000000007eda8000) (0MB)
>[    0.000000] efi: mem19: type=7, attr=0xf, range=[0x000000007eda8000-0x000000007edba000) (0MB)
>[    0.000000] efi: mem20: type=4, attr=0xf, range=[0x000000007edba000-0x000000007f0ca000) (3MB)
>[    0.000000] efi: mem21: type=10, attr=0xf, range=[0x000000007f0ca000-0x000000007f2cb000) (2MB)
>[    0.000000] efi: mem22: type=4, attr=0xf, range=[0x000000007f2cb000-0x000000007fceb000) (10MB)
>[    0.000000] efi: mem23: type=7, attr=0xf, range=[0x000000007fceb000-0x000000007fd12000) (0MB)
>[    0.000000] efi: mem24: type=3, attr=0xf, range=[0x000000007fd12000-0x000000007fe42000) (1MB)
>[    0.000000] efi: mem25: type=7, attr=0xf, range=[0x000000007fe42000-0x000000007fe4b000) (0MB)
>[    0.000000] efi: mem26: type=5, attr=0x800000000000000f, range=[0x000000007fe4b000-0x000000007fe6f000) (0MB)
>[    0.000000] efi: mem27: type=7, attr=0xf, range=[0x000000007fe6f000-0x000000007fe76000) (0MB)
>[    0.000000] efi: mem28: type=2, attr=0xf, range=[0x000000007fe76000-0x000000007fe7f000) (0MB)
>[    0.000000] efi: mem29: type=6, attr=0x800000000000000f, range=[0x000000007fe7f000-0x000000007feab000) (0MB)
>[    0.000000] efi: mem30: type=7, attr=0xf, range=[0x000000007feab000-0x000000007feb2000) (0MB)
>[    0.000000] efi: mem31: type=9, attr=0xf, range=[0x000000007feb2000-0x000000007feb8000) (0MB)
>[    0.000000] efi: mem32: type=7, attr=0xf, range=[0x000000007feb8000-0x000000007feb9000) (0MB)
>[    0.000000] efi: mem33: type=10, attr=0xf, range=[0x000000007feb9000-0x000000007feef000) (0MB)
>[    0.000000] efi: mem34: type=7, attr=0xf, range=[0x000000007feef000-0x000000007fef0000) (0MB)
>[    0.000000] efi: mem35: type=9, attr=0xf, range=[0x000000007fef0000-0x000000007feff000) (0MB)
>[    0.000000] efi: mem36: type=6, attr=0x800000000000000f, range=[0x000000007feff000-0x000000007ff00000) (0MB)
>[    0.000000] efi: mem37: type=11, attr=0x8000000000000000, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
>[    0.000000] efi: mem38: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
>[    0.000000] efi: mem39: type=11, attr=0x8000000000000000, range=[0x00000000fffb0000-0x00000000fffe0000) (0MB)
>[    0.000000] DMI 2.4 present.
>[    0.000000] DMI: Apple Computer, Inc. iMac4,1/Mac-F42786C8, BIOS     IM41.88Z.0055.B08.0610121350 10/12/06
>[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x7fef0 max_arch_pfn = 0x100000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-CFFFF write-protect
>[    0.000000]   D0000-DFFFF uncachable
>[    0.000000]   E0000-FFFFF write-protect
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 0FFE00000 mask FFFE00000 write-protect
>[    0.000000]   1 base 000000000 mask F80000000 write-back
>[    0.000000]   2 base 07FF00000 mask FFFF00000 uncachable
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] PAT not supported by CPU.
>[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
>[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x377fdfff]
>[    0.000000]  [mem 0x00000000-0x003fffff] page 4k
>[    0.000000]  [mem 0x00400000-0x373fffff] page 2M
>[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
>[    0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x01ffa000-0x01ffffff]
>[    0.000000] ACPI: RSDP 7fefd014 00024 (v02 APPLE )
>[    0.000000] ACPI: XSDT 7fefd120 00074 (v01 APPLE   Apple00 00000055      01000013)
>[    0.000000] ACPI: FACP 7fefb000 000F4 (v03 APPLE   Apple00 00000055 Loki 0000005F)
>[    0.000000] ACPI: DSDT 7fef1000 03D19 (v01 APPLE      iMac 00040001 INTL 20050309)
>[    0.000000] ACPI: FACS 7febb000 00040
>[    0.000000] ACPI: HPET 7fefa000 00038 (v01 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: APIC 7fef9000 00068 (v01 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: MCFG 7fef8000 0003C (v01 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: ASF! 7fef7000 0009C (v32 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: SBST 7fef6000 00030 (v01 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: ECDT 7fef5000 00053 (v01 APPLE   Apple00 00000001 Loki 0000005F)
>[    0.000000] ACPI: SSDT 7feb7000 0064F (v01 APPLE   SataPri 00001000 INTL 20050309)
>[    0.000000] ACPI: SSDT 7feb6000 0069C (v01 APPLE   SataSec 00001000 INTL 20050309)
>[    0.000000] ACPI: SSDT 7fef0000 004DC (v01 APPLE     CpuPm 00003000 INTL 20050309)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] 1158MB HIGHMEM available.
>[    0.000000] 887MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 377fe000
>[    0.000000]   low ram: 0 - 377fe000
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
>[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
>[    0.000000]   HighMem  [mem 0x377fe000-0x7feeffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00010000-0x0008efff]
>[    0.000000]   node   0: [mem 0x00090000-0x0009ffff]
>[    0.000000]   node   0: [mem 0x00100000-0x7f0c9fff]
>[    0.000000]   node   0: [mem 0x7f2cb000-0x7fe4afff]
>[    0.000000]   node   0: [mem 0x7fe6f000-0x7fe7efff]
>[    0.000000]   node   0: [mem 0x7feab000-0x7feb1fff]
>[    0.000000]   node   0: [mem 0x7feb8000-0x7feb8fff]
>[    0.000000]   node   0: [mem 0x7feef000-0x7feeffff]
>[    0.000000] On node 0 totalpages: 523250
>[    0.000000] free_area_init_node: node 0, pgdat c1a6da40, node_mem_map f67fd200
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1744 pages used for memmap
>[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 2318 pages used for memmap
>[    0.000000]   HighMem zone: 293719 pages, LIFO batch:31
>[    0.000000] Using APIC driver default
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
>[    0.000000] e820: [mem 0x7ff00000-0xe00f7fff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 13 pages/cpu @f67d7000 s31104 r0 d22144 u53248
>[    0.000000] pcpu-alloc: s31104 r0 d22144 u53248 alloc=13*4096
>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519156
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.6.0-rc3-efifb-radeonkms-gmux root=/dev/sda3 ro
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] __ex_table already sorted, skipping sort
>[    0.000000] Initializing CPU#0
>[    0.000000] Initializing HighMem for node 0 (000377fe:0007fef0)
>[    0.000000] Memory: 2037216k/2096064k available (7958k kernel code, 29296k reserved, 2767k data, 460k init, 1157660k highmem)
>[    0.000000] virtual kernel memory layout:
>[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
>[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>[    0.000000]       .init : 0xc1a7a000 - 0xc1aed000   ( 460 kB)
>[    0.000000]       .data : 0xc17c5bd6 - 0xc1a799c0   (2767 kB)
>[    0.000000]       .text : 0xc1000000 - 0xc17c5bd6   (7958 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
>[    0.000000] NR_IRQS:2304 nr_irqs:512 16
>[    0.000000] CPU 0 irqstacks, hard=f6008000 soft=f600a000
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1833.183 MHz processor
>[    0.001001] Calibrating delay loop (skipped), value calculated using timer frequency.. 3666.36 BogoMIPS (lpj=1833183)
>[    0.001012] pid_max: default: 32768 minimum: 301
>[    0.001025] ------------[ cut here ]------------
>[    0.001034] WARNING: at arch/x86/mm/ioremap.c:102 __ioremap_caller+0x2d2/0x300()
>[    0.001041] Hardware name: iMac4,1
>[    0.001045] Modules linked in:
>[    0.001052] Pid: 0, comm: swapper/0 Not tainted 3.6.0-rc3-efifb-radeonkms-gmux #2
>[    0.001058] Call Trace:
>[    0.001066]  [<c1038e9d>] warn_slowpath_common+0x6d/0xa0
>[    0.001072]  [<c102a012>] ? __ioremap_caller+0x2d2/0x300
>[    0.001079]  [<c102a012>] ? __ioremap_caller+0x2d2/0x300
>[    0.001085]  [<c1038eed>] warn_slowpath_null+0x1d/0x20
>[    0.001092]  [<c102a012>] __ioremap_caller+0x2d2/0x300
>[    0.001099]  [<c1102611>] ? __kmem_cache_create+0x31/0x2d0
>[    0.001106]  [<c110262b>] ? __kmem_cache_create+0x4b/0x2d0
>[    0.001114]  [<c17bc5d4>] ? mutex_lock+0x14/0x40
>[    0.001121]  [<c102a073>] ioremap_cache+0x13/0x20
>[    0.001129]  [<c1a8c94a>] ? efi_enter_virtual_mode+0x158/0x3ae
>[    0.002006]  [<c1a8c94a>] efi_enter_virtual_mode+0x158/0x3ae
>[    0.002013]  [<c103c70f>] ? put_online_cpus+0x3f/0x50
>[    0.002020]  [<c1a7a8a7>] start_kernel+0x27f/0x2e9
>[    0.002026]  [<c1a7a3ed>] ? repair_env_string+0x51/0x51
>[    0.002033]  [<c1a7a29f>] i386_start_kernel+0x75/0x79
>[    0.002046] ---[ end trace 369da6a6841c63eb ]---
>[    0.005321] Security Framework initialized
>[    0.005330] SELinux:  Initializing.
>[    0.005340] SELinux:  Starting in permissive mode
>[    0.005356] Mount-cache hash table entries: 512
>[    0.005604] Initializing cgroup subsys cpuacct
>[    0.005610] Initializing cgroup subsys freezer
>[    0.005639] Disabled fast string operations
>[    0.005647] CPU: Physical Processor ID: 0
>[    0.005651] CPU: Processor Core ID: 0
>[    0.005656] mce: CPU supports 6 MCE banks
>[    0.005668] CPU0: Thermal monitoring enabled (TM2)
>[    0.005674] process: using mwait in idle threads
>[    0.005687] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
>[    0.005687] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
>[    0.005687] tlb_flushall_shift is 0x6
>[    0.005792] ACPI: Core revision 20120711
>[    0.009052] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.009508] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.019733] smpboot: CPU0: Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
>[    0.019996] Performance Events: Core events, core PMU driver.
>[    0.019996] ... version:                1
>[    0.019996] ... bit width:              40
>[    0.019996] ... generic registers:      2
>[    0.019996] ... value mask:             000000ffffffffff
>[    0.019996] ... max period:             000000007fffffff
>[    0.019996] ... fixed-purpose events:   0
>[    0.019996] ... event mask:             0000000000000003
>[    0.019996] CPU 1 irqstacks, hard=f608c000 soft=f608e000
>[    0.019996] smpboot: Booting Node   0, Processors  #1 OK
>[    0.001999] Initializing CPU#1
>[    0.001999] Disabled fast string operations
>[    0.031027] Brought up 2 CPUs
>[    0.031027] smpboot: Total of 2 processors activated (7332.73 BogoMIPS)
>[    0.033004] devtmpfs: initialized
>[    0.033256] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
>[    0.033256] PM: Registering ACPI NVS region [mem 0x7f0ca000-0x7f2cafff] (2101248 bytes)
>[    0.033256] PM: Registering ACPI NVS region [mem 0x7feb9000-0x7feeefff] (221184 bytes)
>[    0.033256] RTC time: 21:37:20, date: 09/16/12
>[    0.033278] NET: Registered protocol family 16
>[    0.033361] kworker/u:0 (18) used greatest stack depth: 6936 bytes left
>[    0.034100] ACPI: bus type pci registered
>[    0.034120] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.034120] PCI: not using MMCONFIG
>[    0.048836] PCI: Using configuration type 1 for base access
>[    0.063021] bio: create slab <bio-0> at 0
>[    0.063052] ACPI: Added _OSI(Module Device)
>[    0.063052] ACPI: Added _OSI(Processor Device)
>[    0.063052] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.063052] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.063700] ACPI: EC: EC description table is found, configuring boot EC
>[    0.065269] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.068275] ACPI: SSDT 7feb4c90 0022A (v01 APPLE   Cpu0Ist 00003000 INTL 20050309)
>[    0.068508] ACPI: Dynamic OEM Table Load:
>[    0.068515] ACPI: SSDT   (null) 0022A (v01 APPLE   Cpu0Ist 00003000 INTL 20050309)
>[    0.068646] ACPI: SSDT 7feb3e10 001BA (v01 APPLE   Cpu0Cst 00003001 INTL 20050309)
>[    0.068861] ACPI: Dynamic OEM Table Load:
>[    0.068867] ACPI: SSDT   (null) 001BA (v01 APPLE   Cpu0Cst 00003001 INTL 20050309)
>[    0.075239] ACPI: SSDT 7feb4f10 00087 (v01 APPLE   Cpu1Ist 00003000 INTL 20050309)
>[    0.075462] ACPI: Dynamic OEM Table Load:
>[    0.075468] ACPI: SSDT   (null) 00087 (v01 APPLE   Cpu1Ist 00003000 INTL 20050309)
>[    0.075584] ACPI: SSDT 7feb2f10 00085 (v01 APPLE   Cpu1Cst 00003000 INTL 20050309)
>[    0.075800] ACPI: Dynamic OEM Table Load:
>[    0.075806] ACPI: SSDT   (null) 00085 (v01 APPLE   Cpu1Cst 00003000 INTL 20050309)
>[    0.082142] ACPI: Interpreter enabled
>[    0.082161] ACPI: (supports S0 S3 S4 S5)
>[    0.082184] ACPI: Using IOAPIC for interrupt routing
>[    0.082208] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.082443] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
>[    0.082452] PCI: Using MMCONFIG for extended config space
>[    0.090057] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>[    0.090162] ACPI: No dock devices found.
>[    0.090174] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>[    0.090453] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.090762] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>[    0.090766] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
>[    0.090769] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>[    0.090772] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)
>[    0.090775] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
>[    0.090778] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
>[    0.090782] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
>[    0.090785] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
>[    0.090788] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
>[    0.090791] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
>[    0.090794] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
>[    0.090797] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
>[    0.090801] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
>[    0.090804] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored)
>[    0.090807] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] (ignored)
>[    0.090810] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored)
>[    0.090813] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
>[    0.090816] PCI: root bus 00: using default resources
>[    0.091018] PCI host bridge to bus 0000:00
>[    0.091027] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
>[    0.091030] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.091037] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
>[    0.091043] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
>[    0.091059] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
>[    0.091111] pci 0000:00:01.0: [8086:27a1] type 01 class 0x060400
>[    0.091160] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.091183] pci 0000:00:07.0: [8086:27a3] type 00 class 0x110100
>[    0.091194] pci 0000:00:07.0: reg 10: [mem 0x88404000-0x88404fff]
>[    0.091285] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
>[    0.091306] pci 0000:00:1b.0: reg 10: [mem 0x88400000-0x88403fff 64bit]
>[    0.091410] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.091441] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
>[    0.091549] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.091582] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
>[    0.091691] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.091727] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
>[    0.091781] pci 0000:00:1d.0: reg 20: [io  0x30a0-0x30bf]
>[    0.091824] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
>[    0.091878] pci 0000:00:1d.1: reg 20: [io  0x3080-0x309f]
>[    0.091921] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
>[    0.091975] pci 0000:00:1d.2: reg 20: [io  0x3060-0x307f]
>[    0.092049] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
>[    0.092103] pci 0000:00:1d.3: reg 20: [io  0x3040-0x305f]
>[    0.092159] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
>[    0.092182] pci 0000:00:1d.7: reg 10: [mem 0x88405400-0x884057ff]
>[    0.092289] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.092316] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>[    0.092412] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
>[    0.092529] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
>[    0.092539] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
>[    0.092548] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 0003)
>[    0.092558] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
>[    0.092619] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018f
>[    0.092635] pci 0000:00:1f.1: reg 10: [io  0x30e8-0x30ef]
>[    0.092648] pci 0000:00:1f.1: reg 14: [io  0x30fc-0x30ff]
>[    0.092660] pci 0000:00:1f.1: reg 18: [io  0x30e0-0x30e7]
>[    0.092673] pci 0000:00:1f.1: reg 1c: [io  0x30f8-0x30fb]
>[    0.092685] pci 0000:00:1f.1: reg 20: [io  0x30c0-0x30cf]
>[    0.092737] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
>[    0.092760] pci 0000:00:1f.2: reg 10: [io  0x30d8-0x30df]
>[    0.092773] pci 0000:00:1f.2: reg 14: [io  0x30f4-0x30f7]
>[    0.092785] pci 0000:00:1f.2: reg 18: [io  0x30d0-0x30d7]
>[    0.092798] pci 0000:00:1f.2: reg 1c: [io  0x30f0-0x30f3]
>[    0.092810] pci 0000:00:1f.2: reg 20: [io  0x3020-0x302f]
>[    0.092823] pci 0000:00:1f.2: reg 24: [mem 0x88405000-0x884053ff]
>[    0.092881] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.092905] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
>[    0.092976] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
>[    0.093065] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
>[    0.093078] pci 0000:01:00.0: [1002:71c5] type 00 class 0x030000
>[    0.093089] pci 0000:01:00.0: reg 10: [mem 0x80000000-0x87ffffff pref]
>[    0.093099] pci 0000:01:00.0: reg 14: [io  0x2000-0x20ff]
>[    0.093108] pci 0000:01:00.0: reg 18: [mem 0x88300000-0x8830ffff]
>[    0.093134] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
>[    0.093169] pci 0000:01:00.0: supports D1 D2
>[    0.093181] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.093195] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.093203] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
>[    0.093207] pci 0000:00:01.0:   bridge window [mem 0x88300000-0x883fffff]
>[    0.093212] pci 0000:00:01.0:   bridge window [mem 0x80000000-0x87ffffff 64bit pref]
>[    0.093271] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
>[    0.093305] pci 0000:02:00.0: [11ab:4362] type 00 class 0x020000
>[    0.093335] pci 0000:02:00.0: reg 10: [mem 0x88200000-0x88203fff 64bit]
>[    0.093352] pci 0000:02:00.0: reg 18: [io  0x1000-0x10ff]
>[    0.093412] pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
>[    0.093508] pci 0000:02:00.0: supports D1 D2
>[    0.093511] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.093532] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.093550] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.093559] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>[    0.093565] pci 0000:00:1c.0:   bridge window [mem 0x88200000-0x882fffff]
>[    0.093630] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
>[    0.093660] pci 0000:03:00.0: [14e4:4312] type 00 class 0x028000
>[    0.093682] pci 0000:03:00.0: reg 10: [mem 0x88100000-0x88103fff]
>[    0.093847] pci 0000:03:00.0: supports D1 D2
>[    0.093872] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
>[    0.093891] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.093902] pci 0000:00:1c.1:   bridge window [mem 0x88100000-0x881fffff]
>[    0.093941] pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-ff]
>[    0.093962] pci 0000:04:03.0: [11c1:5811] type 00 class 0x0c0010
>[    0.093983] pci 0000:04:03.0: reg 10: [mem 0x88000000-0x88000fff]
>[    0.094097] pci 0000:04:03.0: supports D1 D2
>[    0.094100] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
>[    0.094164] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
>[    0.094177] pci 0000:00:1e.0:   bridge window [mem 0x88000000-0x880fffff]
>[    0.094186] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>[    0.094189] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
>[    0.094213] pci_bus 0000:00: on NUMA node 0
>[    0.094217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.094396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>[    0.094458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>[    0.094518] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>[    0.094593] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>[    0.094918]  pci0000:00: Requesting ACPI _OSC control (0x1d)
>[    0.095244]  pci0000:00: ACPI _OSC control (0x1d) granted
>[    0.100059] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>[    0.100126] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.100192] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>[    0.100256] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.100319] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>[    0.100382] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.100446] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>[    0.100509] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.100555] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
>[    0.100555] vgaarb: loaded
>[    0.100555] vgaarb: bridge control possible 0000:01:00.0
>[    0.101053] SCSI subsystem initialized
>[    0.101053] ACPI: bus type scsi registered
>[    0.101053] libata version 3.00 loaded.
>[    0.101053] ACPI: bus type usb registered
>[    0.101053] usbcore: registered new interface driver usbfs
>[    0.101053] usbcore: registered new interface driver hub
>[    0.101053] usbcore: registered new device driver usb
>[    0.102010] Advanced Linux Sound Architecture Driver Version 1.0.25.
>[    0.102010] PCI: Using ACPI for IRQ routing
>[    0.112426] PCI: pci_cache_line_size set to 64 bytes
>[    0.112520] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
>[    0.112523] e820: reserve RAM buffer [mem 0x7f0ca000-0x7fffffff]
>[    0.112527] e820: reserve RAM buffer [mem 0x7fe4b000-0x7fffffff]
>[    0.112531] e820: reserve RAM buffer [mem 0x7fe7f000-0x7fffffff]
>[    0.112534] e820: reserve RAM buffer [mem 0x7feb2000-0x7fffffff]
>[    0.112537] e820: reserve RAM buffer [mem 0x7feb9000-0x7fffffff]
>[    0.112540] e820: reserve RAM buffer [mem 0x7fef0000-0x7fffffff]
>[    0.113068] Bluetooth: Core ver 2.16
>[    0.113068] NET: Registered protocol family 31
>[    0.113068] Bluetooth: HCI device and connection manager initialized
>[    0.113068] Bluetooth: HCI socket layer initialized
>[    0.113068] Bluetooth: L2CAP socket layer initialized
>[    0.113068] Bluetooth: SCO socket layer initialized
>[    0.113160] NetLabel: Initializing
>[    0.113165] NetLabel:  domain hash size = 128
>[    0.113169] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.113186] NetLabel:  unlabeled traffic allowed by default
>[    0.113205] cfg80211: Calling CRDA to update world regulatory domain
>[    0.113220] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>[    0.113220] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>[    0.113220] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>[    0.115999] Switching to clocksource hpet
>[    0.120990] pnp: PnP ACPI init
>[    0.121026] ACPI: bus type pnp registered
>[    0.121238] pnp 00:00: [bus 00-ff]
>[    0.121243] pnp 00:00: [io  0x0000-0x0cf7 window]
>[    0.121246] pnp 00:00: [io  0x0cf8-0x0cff]
>[    0.121249] pnp 00:00: [io  0x0d00-0xffff window]
>[    0.121252] pnp 00:00: [mem 0x000a0000-0x000bffff window]
>[    0.121255] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>[    0.121258] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>[    0.121261] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>[    0.121264] pnp 00:00: [mem 0x000cc000-0x000cffff window]
>[    0.121267] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>[    0.121270] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>[    0.121273] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
>[    0.121276] pnp 00:00: [mem 0x000dc000-0x000dffff window]
>[    0.121279] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
>[    0.121282] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
>[    0.121285] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
>[    0.121288] pnp 00:00: [mem 0x000ec000-0x000effff window]
>[    0.121291] pnp 00:00: [mem 0x000f0000-0x000fffff window]
>[    0.121294] pnp 00:00: [mem 0x80000000-0xfebfffff window]
>[    0.121413] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
>[    0.121430] pnp 00:01: [mem 0xe0000000-0xefffffff]
>[    0.121433] pnp 00:01: [mem 0xfed14000-0xfed17fff]
>[    0.121436] pnp 00:01: [mem 0xfed18000-0xfed18fff]
>[    0.121439] pnp 00:01: [mem 0xfed19000-0xfed19fff]
>[    0.121441] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
>[    0.121444] pnp 00:01: [mem 0xfed20000-0xfed8ffff]
>[    0.121544] system 00:01: [mem 0xe0000000-0xefffffff] could not be reserved
>[    0.121552] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
>[    0.121559] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.121566] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.121573] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.121580] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
>[    0.121588] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.121800] pnp 00:02: [io  0x0300-0x031f]
>[    0.121814] pnp 00:02: [irq 6]
>[    0.121909] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active)
>[    0.121932] pnp 00:03: [io  0x004e-0x004f]
>[    0.121936] pnp 00:03: [io  0x4700-0x470b]
>[    0.122039] pnp 00:03: Plug and Play ACPI device, IDs IFX0101 (active)
>[    0.122052] pnp 00:04: [io  0x0000-0x001f]
>[    0.122055] pnp 00:04: [io  0x0081-0x0091]
>[    0.122058] pnp 00:04: [io  0x0093-0x009f]
>[    0.122060] pnp 00:04: [io  0x00c0-0x00df]
>[    0.122063] pnp 00:04: [dma 4]
>[    0.122152] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.122164] pnp 00:05: [mem 0xff000000-0xffffffff]
>[    0.122253] pnp 00:05: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.122335] pnp 00:06: [irq 0 disabled]
>[    0.122342] pnp 00:06: [irq 8]
>[    0.122345] pnp 00:06: [mem 0xfed00000-0xfed003ff]
>[    0.122455] system 00:06: [mem 0xfed00000-0xfed003ff] has been reserved
>[    0.122464] system 00:06: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
>[    0.122478] pnp 00:07: [io  0x00f0]
>[    0.122485] pnp 00:07: [irq 13]
>[    0.122579] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.122609] pnp 00:08: [io  0x002e-0x002f]
>[    0.122612] pnp 00:08: [io  0x004e-0x004f]
>[    0.122615] pnp 00:08: [io  0x0061]
>[    0.122617] pnp 00:08: [io  0x0063]
>[    0.122620] pnp 00:08: [io  0x0065]
>[    0.122622] pnp 00:08: [io  0x0067]
>[    0.122625] pnp 00:08: [io  0x0070]
>[    0.122628] pnp 00:08: [io  0x0080]
>[    0.122630] pnp 00:08: [io  0x0092]
>[    0.122633] pnp 00:08: [io  0x00b2-0x00b3]
>[    0.122636] pnp 00:08: [io  0x0680-0x06ef]
>[    0.122639] pnp 00:08: [io  0x0800-0x080f]
>[    0.122641] pnp 00:08: [io  0x0810-0x0817]
>[    0.122644] pnp 00:08: [io  0x0400-0x047f]
>[    0.122647] pnp 00:08: [io  0x0500-0x053f]
>[    0.122649] pnp 00:08: [io  0x1640-0x164f]
>[    0.122661] pnp 00:08: disabling [io  0x1640-0x164f] because it overlaps 0000:00:1c.0 BAR 7 [io  0x1000-0x1fff]
>[    0.122783] system 00:08: [io  0x0680-0x06ef] has been reserved
>[    0.122791] system 00:08: [io  0x0800-0x080f] has been reserved
>[    0.122797] system 00:08: [io  0x0810-0x0817] has been reserved
>[    0.122804] system 00:08: [io  0x0400-0x047f] has been reserved
>[    0.122810] system 00:08: [io  0x0500-0x053f] has been reserved
>[    0.122818] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.122829] pnp 00:09: [io  0x0070-0x0077]
>[    0.122920] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.122953] pnp: PnP ACPI: found 10 devices
>[    0.122958] ACPI: ACPI bus type pnp unregistered
>[    0.163992] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
>[    0.164017] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
>[    0.164046] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff pref] to [bus 02] add_size 200000
>[    0.164059] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
>[    0.164064] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
>[    0.164081] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
>[    0.164085] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.164088] pci 0000:00:1c.1: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.164095] pci 0000:00:1c.0: BAR 9: assigned [mem 0x88500000-0x887fffff pref]
>[    0.164105] pci 0000:00:1c.1: BAR 9: assigned [mem 0x88800000-0x889fffff 64bit pref]
>[    0.164114] pci 0000:00:1c.1: BAR 7: assigned [io  0x4000-0x4fff]
>[    0.164122] pci 0000:01:00.0: BAR 6: assigned [mem 0x88320000-0x8833ffff pref]
>[    0.164130] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.164137] pci 0000:00:01.0:   bridge window [io  0x2000-0x2fff]
>[    0.164145] pci 0000:00:01.0:   bridge window [mem 0x88300000-0x883fffff]
>[    0.164153] pci 0000:00:01.0:   bridge window [mem 0x80000000-0x87ffffff 64bit pref]
>[    0.164164] pci 0000:02:00.0: BAR 6: assigned [mem 0x88500000-0x8851ffff pref]
>[    0.164172] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.164179] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
>[    0.164189] pci 0000:00:1c.0:   bridge window [mem 0x88200000-0x882fffff]
>[    0.164199] pci 0000:00:1c.0:   bridge window [mem 0x88500000-0x887fffff pref]
>[    0.164212] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.164219] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
>[    0.164229] pci 0000:00:1c.1:   bridge window [mem 0x88100000-0x881fffff]
>[    0.164239] pci 0000:00:1c.1:   bridge window [mem 0x88800000-0x889fffff 64bit pref]
>[    0.164252] pci 0000:00:1e.0: PCI bridge to [bus 04]
>[    0.164262] pci 0000:00:1e.0:   bridge window [mem 0x88000000-0x880fffff]
>[    0.164352] pci 0000:00:1e.0: power state changed by ACPI to D0
>[    0.164364] pci 0000:00:1e.0: setting latency timer to 64
>[    0.164369] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>[    0.164372] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
>[    0.164375] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
>[    0.164379] pci_bus 0000:01: resource 1 [mem 0x88300000-0x883fffff]
>[    0.164382] pci_bus 0000:01: resource 2 [mem 0x80000000-0x87ffffff 64bit pref]
>[    0.164385] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
>[    0.164388] pci_bus 0000:02: resource 1 [mem 0x88200000-0x882fffff]
>[    0.164391] pci_bus 0000:02: resource 2 [mem 0x88500000-0x887fffff pref]
>[    0.164394] pci_bus 0000:03: resource 0 [io  0x4000-0x4fff]
>[    0.164398] pci_bus 0000:03: resource 1 [mem 0x88100000-0x881fffff]
>[    0.164401] pci_bus 0000:03: resource 2 [mem 0x88800000-0x889fffff 64bit pref]
>[    0.164404] pci_bus 0000:04: resource 1 [mem 0x88000000-0x880fffff]
>[    0.164407] pci_bus 0000:04: resource 4 [io  0x0000-0xffff]
>[    0.164410] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff]
>[    0.164452] NET: Registered protocol family 2
>[    0.164636] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.165345] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>[    0.165688] TCP: Hash tables configured (established 131072 bind 65536)
>[    0.165716] TCP: reno registered
>[    0.165723] UDP hash table entries: 512 (order: 2, 16384 bytes)
>[    0.165737] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>[    0.165831] NET: Registered protocol family 1
>[    0.165955] RPC: Registered named UNIX socket transport module.
>[    0.165963] RPC: Registered udp transport module.
>[    0.165968] RPC: Registered tcp transport module.
>[    0.165972] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.166046] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>[    0.166049] pci 0000:00:1d.0: Performing full reset
>[    0.166081] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0080
>[    0.166083] pci 0000:00:1d.1: Performing full reset
>[    0.166115] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>[    0.166117] pci 0000:00:1d.2: Performing full reset
>[    0.166145] pci 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
>[    0.166147] pci 0000:00:1d.3: Performing full reset
>[    0.166172] pci 0000:00:1d.7: enabling device (0000 -> 0002)
>[    0.166235] PCI: CLS mismatch (256 != 64), using 64 bytes
>[    0.167098] microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39
>[    0.167113] microcode: CPU1 sig=0x6e8, pf=0x20, revision=0x39
>[    0.167200] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    0.168058] audit: initializing netlink socket (disabled)
>[    0.168076] type=2000 audit(1347831439.167:1): initialized
>[    0.192710] bounce pool size: 64 pages
>[    0.192720] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>[    0.197723] VFS: Disk quotas dquot_6.5.2
>[    0.197842] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    0.199642] NFS: Registering the id_resolver key type
>[    0.199663] Key type id_resolver registered
>[    0.199667] Key type id_legacy registered
>[    0.199881] NTFS driver 2.1.30 [Flags: R/W].
>[    0.200139] fuse init (API version 7.20)
>[    0.200841] Btrfs loaded
>[    0.200850] msgmni has been set to 1769
>[    0.200981] SELinux:  Registering netfilter hooks
>[    0.201763] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
>[    0.201772] io scheduler noop registered
>[    0.201776] io scheduler deadline registered
>[    0.201786] io scheduler cfq registered (default)
>[    0.201960] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>[    0.202236] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
>[    0.202523] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
>[    0.202915] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.202921] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.211584] efifb: dmi detected iMac4,1 - framebuffer at 0x80010000 (1440x900, stride 5888)
>[    0.211666] efifb: probing for efifb
>[    0.212506] efifb: framebuffer at 0x80010000, mapped to 0xf9b80000, using 5184k, total 5184k
>[    0.212514] efifb: mode is 1440x900x32, linelength=5888, pages=1
>[    0.212518] efifb: scrolling: redraw
>[    0.212524] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.292298] Console: switching to colour frame buffer device 180x56
>[    0.365857] fb0: EFI VGA frame buffer device
>[    0.366463] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
>[    0.367217] ACPI: Power Button [PWRB]
>[    0.367648] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>[    0.368329] ACPI: Power Button [PWRF]
>[    0.368938] ACPI: Requesting acpi_cpufreq
>[    0.369476] Monitor-Mwait will be used to enter C-1 state
>[    0.369515] Monitor-Mwait will be used to enter C-2 state
>[    0.369524] tsc: Marking TSC unstable due to TSC halts in idle
>[    0.370073] ACPI: acpi_idle registered with cpuidle
>[    0.373090] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.374721] Non-volatile memory driver v1.3
>[    0.375164] intel_rng: FWH not detected
>[    0.375536] Linux agpgart interface v0.103
>[    0.376345] [drm] Initialized drm 1.1.0 20060810
>[    0.376816] [drm] radeon defaulting to kernel modesetting.
>[    0.377324] [drm] radeon kernel modesetting enabled.
>[    0.377807] checking generic (80010000 510000) vs hw (80000000 8000000)
>[    0.377809] fb: conflicting fb hw usage radeondrmfb vs EFI VGA - removing generic driver
>[    0.378590] Console: switching to colour dummy device 80x25
>[    0.378993] [drm] initializing kernel modesetting (RV530 0x1002:0x71C5 0x106B:0x0080).
>[    0.379029] [drm] register mmio base: 0x88300000
>[    0.379034] [drm] register mmio size: 65536
>[    0.379073] radeon 0000:01:00.0: Invalid ROM contents
>[    0.379112] radeon 0000:01:00.0: Invalid ROM contents
>[    0.379120] [drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
>[    0.379126] radeon 0000:01:00.0: Fatal error during GPU init
>[    0.379132] [drm] radeon: finishing device.
>[    0.379136] [TTM] Memory type 2 has not been initialized
>[    0.379144] [drm] radeon: cp finalized
>[    0.379335] radeon: probe of 0000:01:00.0 failed with error -22
>[    0.382337] brd: module loaded
>[    0.383966] loop: module loaded
>[    0.384410] ahci 0000:00:1f.2: version 3.0
>[    0.384420] ahci 0000:00:1f.2: enabling device (0005 -> 0007)
>[    0.384483] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
>[    0.384530] ahci: SSS flag set, parallel bus scan disabled
>[    0.384564] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x4 impl SATA mode
>[    0.384574] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part 
>[    0.384585] ahci 0000:00:1f.2: setting latency timer to 64
>[    0.385562] scsi0 : ahci
>[    0.385745] scsi1 : ahci
>[    0.385909] scsi2 : ahci
>[    0.386086] scsi3 : ahci
>[    0.386222] ata1: DUMMY
>[    0.386227] ata2: DUMMY
>[    0.386233] ata3: SATA max UDMA/133 abar m1024@0x88405000 port 0x88405200 irq 43
>[    0.386239] ata4: DUMMY
>[    0.386370] ata_piix 0000:00:1f.1: version 2.13
>[    0.386410] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
>[    0.386457] ata_piix 0000:00:1f.1: setting latency timer to 64
>[    0.387078] scsi4 : ata_piix
>[    0.387258] scsi5 : ata_piix
>[    0.387400] ata5: PATA max UDMA/100 cmd 0x30e8 ctl 0x30fc bmdma 0x30c0 irq 18
>[    0.387407] ata6: PATA max UDMA/100 cmd 0x30e0 ctl 0x30f8 bmdma 0x30c8 irq 18
>[    0.387789] PPP generic driver version 2.4.2
>[    0.439100] firewire_ohci 0000:04:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
>[    0.439467] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.439474] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
>[    0.439503] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>[    0.439508] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>[    0.439604] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>[    0.439621] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
>[    0.439626] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
>[    0.439652] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
>[    0.443545] ehci_hcd 0000:00:1d.7: debug port 1
>[    0.443558] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>[    0.443561] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
>[    0.443579] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x88405400
>[    0.443589] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
>[    0.449022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    0.449058] usb usb1: default language 0x0409
>[    0.449068] usb usb1: udev 1, busnum 1, minor = 0
>[    0.449071] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.449078] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.449086] usb usb1: Product: EHCI Host Controller
>[    0.449092] usb usb1: Manufacturer: Linux 3.6.0-rc3-efifb-radeonkms-gmux ehci_hcd
>[    0.449099] usb usb1: SerialNumber: 0000:00:1d.7
>[    0.449250] usb usb1: usb_probe_device
>[    0.449254] usb usb1: configuration #1 chosen from 1 choice
>[    0.449263] usb usb1: adding 1-0:1.0 (config #1, interface 0)
>[    0.449331] hub 1-0:1.0: usb_probe_interface
>[    0.449334] hub 1-0:1.0: usb_probe_interface - got id
>[    0.449337] hub 1-0:1.0: USB hub found
>[    0.449347] hub 1-0:1.0: 8 ports detected
>[    0.449352] hub 1-0:1.0: standalone hub
>[    0.449354] hub 1-0:1.0: no power switching (usb 1.0)
>[    0.449357] hub 1-0:1.0: individual port over-current protection
>[    0.449360] hub 1-0:1.0: power on to power good time: 20ms
>[    0.449365] hub 1-0:1.0: local power source is good
>[    0.449368] hub 1-0:1.0: trying to enable port power on non-switchable hub
>[    0.449492] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.449499] ohci_hcd: block sizes: ed 64 td 64
>[    0.449561] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.449595] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    0.449600] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    0.449688] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.449703] uhci_hcd 0000:00:1d.0: detected 2 ports
>[    0.449712] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
>[    0.449714] uhci_hcd 0000:00:1d.0: Performing full reset
>[    0.449731] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
>[    0.449737] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000030a0
>[    0.449775] usb usb2: default language 0x0409
>[    0.449782] usb usb2: udev 1, busnum 2, minor = 128
>[    0.449786] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.449793] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.449800] usb usb2: Product: UHCI Host Controller
>[    0.449806] usb usb2: Manufacturer: Linux 3.6.0-rc3-efifb-radeonkms-gmux uhci_hcd
>[    0.449813] usb usb2: SerialNumber: 0000:00:1d.0
>[    0.449959] usb usb2: usb_probe_device
>[    0.449962] usb usb2: configuration #1 chosen from 1 choice
>[    0.449969] usb usb2: adding 2-0:1.0 (config #1, interface 0)
>[    0.450048] hub 2-0:1.0: usb_probe_interface
>[    0.450051] hub 2-0:1.0: usb_probe_interface - got id
>[    0.450054] hub 2-0:1.0: USB hub found
>[    0.450062] hub 2-0:1.0: 2 ports detected
>[    0.450067] hub 2-0:1.0: standalone hub
>[    0.450069] hub 2-0:1.0: no power switching (usb 1.0)
>[    0.450072] hub 2-0:1.0: individual port over-current protection
>[    0.450074] hub 2-0:1.0: power on to power good time: 2ms
>[    0.450079] hub 2-0:1.0: local power source is good
>[    0.450082] hub 2-0:1.0: trying to enable port power on non-switchable hub
>[    0.450126] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
>[    0.450146] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    0.450151] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    0.450243] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>[    0.450258] uhci_hcd 0000:00:1d.1: detected 2 ports
>[    0.450266] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
>[    0.450269] uhci_hcd 0000:00:1d.1: Performing full reset
>[    0.450286] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
>[    0.450292] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003080
>[    0.450330] usb usb3: default language 0x0409
>[    0.450338] usb usb3: udev 1, busnum 3, minor = 256
>[    0.450341] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.450348] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.450355] usb usb3: Product: UHCI Host Controller
>[    0.450361] usb usb3: Manufacturer: Linux 3.6.0-rc3-efifb-radeonkms-gmux uhci_hcd
>[    0.450368] usb usb3: SerialNumber: 0000:00:1d.1
>[    0.450502] usb usb3: usb_probe_device
>[    0.450505] usb usb3: configuration #1 chosen from 1 choice
>[    0.450512] usb usb3: adding 3-0:1.0 (config #1, interface 0)
>[    0.450581] hub 3-0:1.0: usb_probe_interface
>[    0.450584] hub 3-0:1.0: usb_probe_interface - got id
>[    0.450587] hub 3-0:1.0: USB hub found
>[    0.450595] hub 3-0:1.0: 2 ports detected
>[    0.450600] hub 3-0:1.0: standalone hub
>[    0.450602] hub 3-0:1.0: no power switching (usb 1.0)
>[    0.450604] hub 3-0:1.0: individual port over-current protection
>[    0.450607] hub 3-0:1.0: power on to power good time: 2ms
>[    0.450612] hub 3-0:1.0: local power source is good
>[    0.450614] hub 3-0:1.0: trying to enable port power on non-switchable hub
>[    0.450660] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
>[    0.450680] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    0.450684] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    0.450778] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>[    0.450792] uhci_hcd 0000:00:1d.2: detected 2 ports
>[    0.450800] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
>[    0.450803] uhci_hcd 0000:00:1d.2: Performing full reset
>[    0.450820] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
>[    0.450826] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003060
>[    0.450863] usb usb4: default language 0x0409
>[    0.450871] usb usb4: udev 1, busnum 4, minor = 384
>[    0.450874] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.450881] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.450889] usb usb4: Product: UHCI Host Controller
>[    0.450894] usb usb4: Manufacturer: Linux 3.6.0-rc3-efifb-radeonkms-gmux uhci_hcd
>[    0.450902] usb usb4: SerialNumber: 0000:00:1d.2
>[    0.451055] usb usb4: usb_probe_device
>[    0.451058] usb usb4: configuration #1 chosen from 1 choice
>[    0.451066] usb usb4: adding 4-0:1.0 (config #1, interface 0)
>[    0.451134] hub 4-0:1.0: usb_probe_interface
>[    0.451137] hub 4-0:1.0: usb_probe_interface - got id
>[    0.451140] hub 4-0:1.0: USB hub found
>[    0.451148] hub 4-0:1.0: 2 ports detected
>[    0.451153] hub 4-0:1.0: standalone hub
>[    0.451155] hub 4-0:1.0: no power switching (usb 1.0)
>[    0.451158] hub 4-0:1.0: individual port over-current protection
>[    0.451160] hub 4-0:1.0: power on to power good time: 2ms
>[    0.451165] hub 4-0:1.0: local power source is good
>[    0.451167] hub 4-0:1.0: trying to enable port power on non-switchable hub
>[    0.451215] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
>[    0.451236] uhci_hcd 0000:00:1d.3: setting latency timer to 64
>[    0.451240] uhci_hcd 0000:00:1d.3: UHCI Host Controller
>[    0.451342] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>[    0.451356] uhci_hcd 0000:00:1d.3: detected 2 ports
>[    0.451365] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
>[    0.451367] uhci_hcd 0000:00:1d.3: Performing full reset
>[    0.451384] uhci_hcd 0000:00:1d.3: supports USB remote wakeup
>[    0.451401] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003040
>[    0.451440] usb usb5: default language 0x0409
>[    0.451448] usb usb5: udev 1, busnum 5, minor = 512
>[    0.451451] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    0.451458] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.451465] usb usb5: Product: UHCI Host Controller
>[    0.451471] usb usb5: Manufacturer: Linux 3.6.0-rc3-efifb-radeonkms-gmux uhci_hcd
>[    0.451478] usb usb5: SerialNumber: 0000:00:1d.3
>[    0.451620] usb usb5: usb_probe_device
>[    0.451623] usb usb5: configuration #1 chosen from 1 choice
>[    0.451630] usb usb5: adding 5-0:1.0 (config #1, interface 0)
>[    0.451698] hub 5-0:1.0: usb_probe_interface
>[    0.451702] hub 5-0:1.0: usb_probe_interface - got id
>[    0.451704] hub 5-0:1.0: USB hub found
>[    0.451712] hub 5-0:1.0: 2 ports detected
>[    0.451717] hub 5-0:1.0: standalone hub
>[    0.451719] hub 5-0:1.0: no power switching (usb 1.0)
>[    0.451722] hub 5-0:1.0: individual port over-current protection
>[    0.451724] hub 5-0:1.0: power on to power good time: 2ms
>[    0.451729] hub 5-0:1.0: local power source is good
>[    0.451732] hub 5-0:1.0: trying to enable port power on non-switchable hub
>[    0.451775] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3
>[    0.451903] usbcore: registered new interface driver usblp
>[    0.451909] Initializing USB Mass Storage driver...
>[    0.451995] usbcore: registered new interface driver usb-storage
>[    0.452015] USB Mass Storage support registered.
>[    0.452101] usbcore: registered new interface driver libusual
>[    0.452337] i8042: PNP: No PS/2 controller found. Probing ports directly.
>[    0.453253] i8042: No controller found
>[    0.453339] mousedev: PS/2 mouse device common for all mice
>[    0.453698] rtc_cmos 00:09: RTC can wake from S4
>[    0.453906] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
>[    0.453945] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    0.454092] i2c /dev entries driver
>[    0.454244] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0001)
>[    0.454256] ACPI Warning: 0x0000efa0-0x0000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
>[    0.454270] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    0.489051] applesmc: key=160 fan=3 temp=7 index=7 acc=0 lux=2 kbd=0
>[    0.489673] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
>[    0.489822] usbcore: registered new interface driver btusb
>[    0.489871] cpuidle: using governor ladder
>[    0.489929] cpuidle: using governor menu
>[    0.489934] EFI Variables Facility v0.08 2004-May-17
>[    0.555897] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001403 0  ACK POWER sig=k CSC CONNECT
>[    0.555903] hub 1-0:1.0: port 1: status 0501 change 0001
>[    0.555947] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001803 0  ACK POWER sig=j CSC CONNECT
>[    0.555951] hub 1-0:1.0: port 3: status 0501 change 0001
>[    0.555983] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001803 0  ACK POWER sig=j CSC CONNECT
>[    0.555986] hub 1-0:1.0: port 4: status 0501 change 0001
>[    0.556041] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001803 0  ACK POWER sig=j CSC CONNECT
>[    0.556045] hub 1-0:1.0: port 7: status 0501 change 0001
>[    0.556084] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0  ACK POWER sig=j CSC CONNECT
>[    0.556088] hub 1-0:1.0: port 8: status 0501 change 0001
>[    0.556127] uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00
>[    0.556225] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00
>[    0.556274] uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00
>[    0.556377] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00
>[    0.556433] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
>[    0.556477] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    0.556537] ata5.00: ATAPI: MATSHITADVD-R   UJ-846, FB2U, max UDMA/66
>[    0.563411] ata5.00: configured for UDMA/66
>[    0.602759] usbcore: registered new interface driver usbhid
>[    0.602765] usbhid: USB HID core driver
>[    0.603439] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
>[    0.603514] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
>[    0.613654] hda_codec: STAC922x, Apple subsys_id=106b0600
>[    0.619572] Netfilter messages via NETLINK v0.30.
>[    0.619593] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[    0.619864] ctnetlink v0.93: registering with nfnetlink.
>[    0.620091] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    0.620142] TCP: cubic registered
>[    0.620147] Initializing XFRM netlink socket
>[    0.620518] NET: Registered protocol family 10
>[    0.620735] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[    0.620776] sit: IPv6 over IPv4 tunneling driver
>[    0.621127] NET: Registered protocol family 17
>[    0.621153] Key type dns_resolver registered
>[    0.621592] Using IPI No-Shortcut mode
>[    0.621905] PM: Hibernation image not present or could not be loaded.
>[    0.621919] registered taskstats version 1
>[    0.622316]   Magic number: 12:31:652
>[    0.622400] console [netcon0] enabled
>[    0.622404] netconsole: network logging started
>[    0.625458] ALSA device list:
>[    0.625463]   #0: HDA Intel at 0x88400000 irq 44
>[    0.656069] hub 1-0:1.0: state 7 ports 8 chg 019a evt 0000
>[    0.656085] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
>[    0.656100] ehci_hcd 0000:00:1d.7: port 1 low speed --> companion
>[    0.692058] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    0.693435] ata3.00: ATA-6: ST3160023AS, 3.42, max UDMA/133
>[    0.693448] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (not used)
>[    0.695022] ata3.00: configured for UDMA/133
>[    0.695273] scsi 2:0:0:0: Direct-Access     ATA      ST3160023AS      3.42 PQ: 0 ANSI: 5
>[    0.695618] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
>[    0.695683] sd 2:0:0:0: [sda] Write Protect is off
>[    0.695691] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    0.695719] sd 2:0:0:0: Attached scsi generic sg0 type 0
>[    0.695721] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    0.697633] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-R   UJ-846   FB2U PQ: 0 ANSI: 5
>[    0.700134] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>[    0.700147] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    0.700482] sr 4:0:0:0: Attached scsi CD-ROM sr0
>[    0.700673] sr 4:0:0:0: Attached scsi generic sg1 type 5
>[    0.707058] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    0.707094] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
>[    0.740966]  sda: sda1 sda2 sda3 sda4
>[    0.741972] sd 2:0:0:0: [sda] Attached SCSI disk
>[    0.741996] md: Waiting for all devices to be available before autodetect
>[    0.742005] md: If you don't use raid, use raid=noautodetect
>[    0.742293] md: Autodetecting RAID arrays.
>[    0.742299] md: Scanned 0 and added 0 devices.
>[    0.742303] md: autorun ...
>[    0.742307] md: ... autorun DONE.
>[    0.758378] ehci_hcd 0000:00:1d.7: port 3 reset complete, port enabled
>[    0.758390] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001005 0  ACK POWER sig=se0 PE CONNECT
>[    0.760783] EXT3-fs (sda3): error: couldn't mount because of unsupported optional features (240)
>[    0.765230] EXT2-fs (sda3): error: couldn't mount because of unsupported optional features (240)
>[    0.796227] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    0.796244] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
>[    0.809056] usb 1-3: new high-speed USB device number 3 using ehci_hcd
>[    0.814725] devtmpfs: mounted
>[    0.814812] Freeing unused kernel memory: 460k freed
>[    0.815132] Write protecting the kernel text: 7960k
>[    0.815189] Write protecting the kernel read-only data: 2336k
>[    0.860259] ehci_hcd 0000:00:1d.7: port 3 reset complete, port enabled
>[    0.860272] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001005 0  ACK POWER sig=se0 PE CONNECT
>[    0.924037] usb 1-3: default language 0x0409
>[    0.924413] usb 1-3: udev 3, busnum 1, minor = 2
>[    0.924417] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608
>[    0.924425] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    0.924432] usb 1-3: Product: USB2.0 Hub
>[    0.924671] kworker/u:4 (1063) used greatest stack depth: 6844 bytes left
>[    0.924687] usb 1-3: usb_probe_device
>[    0.924692] usb 1-3: configuration #1 chosen from 1 choice
>[    0.924924] usb 1-3: adding 1-3:1.0 (config #1, interface 0)
>[    0.925081] hub 1-3:1.0: usb_probe_interface
>[    0.925088] hub 1-3:1.0: usb_probe_interface - got id
>[    0.925093] hub 1-3:1.0: USB hub found
>[    0.925405] hub 1-3:1.0: 4 ports detected
>[    0.925416] hub 1-3:1.0: standalone hub
>[    0.925420] hub 1-3:1.0: ganged power switching
>[    0.925425] hub 1-3:1.0: global over-current protection
>[    0.925430] hub 1-3:1.0: Single TT
>[    0.925435] hub 1-3:1.0: TT requires at most 32 FS bit times (2664 ns)
>[    0.925440] hub 1-3:1.0: Port indicators are supported
>[    0.925444] hub 1-3:1.0: power on to power good time: 100ms
>[    0.925902] hub 1-3:1.0: local power source is good
>[    0.925908] hub 1-3:1.0: no over-current condition exists
>[    0.925913] hub 1-3:1.0: enabling power on all ports
>[    0.927098] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
>[    0.940253] firewire_core 0000:04:03.0: created device fw0: GUID 001451fffebd2d64, S400
>[    0.978263] ehci_hcd 0000:00:1d.7: port 4 reset complete, port enabled
>[    0.978276] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0  ACK POWER sig=se0 PE CONNECT
>[    1.027785] hub 1-3:1.0: port 3: status 0101 change 0001
>[    1.029042] usb 1-4: new high-speed USB device number 4 using ehci_hcd
>[    1.080264] ehci_hcd 0000:00:1d.7: port 4 reset complete, port enabled
>[    1.080278] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001005 0  ACK POWER sig=se0 PE CONNECT
>[    1.128052] usb 1-3: link qh256-0001/f59d3180 start 1 [1/0 us]
>[    1.143425] usb 1-4: udev 4, busnum 1, minor = 3
>[    1.143430] usb 1-4: New USB device found, idVendor=05ac, idProduct=8300
>[    1.143438] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.143677] usb 1-4: usb_probe_device
>[    1.143681] usb 1-4: configuration #1 chosen from 1 choice
>[    1.143793] usb 1-4: adding 1-4:1.0 (config #1, interface 0)
>[    1.143984] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s
>[    1.194270] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
>[    1.194283] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003801 0  ACK POWER OWNER sig=j CONNECT
>[    1.194291] hub 1-0:1.0: port 7 not reset yet, waiting 50ms
>[    1.245055] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    1.245090] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s
>[    1.296272] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
>[    1.296285] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003801 0  ACK POWER OWNER sig=j CONNECT
>[    1.296320] hub 1-0:1.0: port 8 not reset yet, waiting 50ms
>[    1.347053] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    1.347084] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002
>[    1.347097] uhci_hcd 0000:00:1d.0: port 1 portsc 01a3,00
>[    1.347110] hub 2-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
>[    1.451056] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
>[    1.454057] usb usb4: suspend_rh (auto-stop)
>[    1.553043] usb 2-1: new low-speed USB device number 2 using uhci_hcd
>[    1.678451] kbd_mode (1072) used greatest stack depth: 6428 bytes left
>[    1.697845] usb 2-1: skipped 1 descriptor after interface
>[    1.697854] usb 2-1: skipped 1 descriptor after interface
>[    1.702837] usb 2-1: default language 0x0409
>[    1.704083] usb usb3: suspend_rh (auto-stop)
>[    1.717843] usb 2-1: udev 2, busnum 2, minor = 129
>[    1.717852] usb 2-1: New USB device found, idVendor=046d, idProduct=c505
>[    1.717865] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.717879] usb 2-1: Product: USB Receiver
>[    1.717888] usb 2-1: Manufacturer: Logitech
>[    1.718208] usb 2-1: usb_probe_device
>[    1.718226] usb 2-1: configuration #1 chosen from 1 choice
>[    1.720863] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
>[    1.721042] usbhid 2-1:1.0: usb_probe_interface
>[    1.721049] usbhid 2-1:1.0: usb_probe_interface - got id
>[    1.727926] loadkeys (1073) used greatest stack depth: 6396 bytes left
>[    1.728154] init-early.sh (1070) used greatest stack depth: 5976 bytes left
>[    1.736030] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
>[    1.736051] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
>[    1.736272] hid-generic 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
>[    1.736300] usb 2-1: adding 2-1:1.1 (config #1, interface 1)
>[    1.736392] usbhid 2-1:1.1: usb_probe_interface
>[    1.736396] usbhid 2-1:1.1: usb_probe_interface - got id
>[    1.770049] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input3
>[    1.770076] uhci_hcd 0000:00:1d.0: reserve dev 2 ep82-INT, period 8, phase 4, 118 us
>[    1.770285] hid-generic 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
>[    1.770333] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[    1.770338] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0006
>[    1.770349] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00
>[    1.770358] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
>[    1.874050] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
>[    1.976049] usb 5-1: new full-speed USB device number 2 using uhci_hcd
>[    2.158528] usb 5-1: skipped 1 descriptor after interface
>[    2.158541] usb 5-1: udev 2, busnum 5, minor = 513
>[    2.158548] usb 5-1: New USB device found, idVendor=05ac, idProduct=1000
>[    2.158562] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.158879] usb 5-1: usb_probe_device
>[    2.158895] usb 5-1: configuration #1 chosen from 1 choice
>[    2.162535] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
>[    2.162892] usbhid 5-1:1.0: usb_probe_interface
>[    2.162896] usbhid 5-1:1.0: usb_probe_interface - got id
>[    2.162900] usbhid 5-1:1.0: couldn't find an input interrupt endpoint
>[    2.162935] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00
>[    2.162944] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
>[    2.266051] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>[    2.368049] usb 5-2: new full-speed USB device number 3 using uhci_hcd
>[    2.488031] usb 5-2: ep0 maxpacket = 8
>[    2.515542] usb 5-2: skipped 1 descriptor after interface
>[    2.520532] usb 5-2: default language 0x0409
>[    2.538537] usb 5-2: udev 3, busnum 5, minor = 514
>[    2.538548] usb 5-2: New USB device found, idVendor=05ac, idProduct=8240
>[    2.538563] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    2.538576] usb 5-2: Product: IR Receiver
>[    2.538586] usb 5-2: Manufacturer: Apple Computer, Inc.
>[    2.538893] usb 5-2: usb_probe_device
>[    2.538901] usb 5-2: configuration #1 chosen from 1 choice
>[    2.541538] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
>[    2.541624] usbhid 5-2:1.0: usb_probe_interface
>[    2.541628] usbhid 5-2:1.0: usb_probe_interface - got id
>[    2.624531] usb 5-2: uhci_result_common: failed with status 440000
>[    2.625521] usb 5-2: uhci_result_common: failed with status 440000
>[    2.625745] hid-generic 0003:05AC:8240.0003: hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.3-2/input0
>[    2.625829] hub 1-0:1.0: state 7 ports 8 chg 0000 evt ff82
>[    2.625848] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    2.625862] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s
>[    2.730051] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
>[    2.730070] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    2.730083] hub 1-0:1.0: port 7, status 0100, change 0001, 12 Mb/s
>[    2.834047] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x100
>[    2.834064] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0  ACK POWER sig=j CSC CONNECT
>[    2.834076] hub 1-0:1.0: port 8, status 0501, change 0001, 480 Mb/s
>[    2.851078] systemd-udevd[1189]: starting version 189
>[    2.938049] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x501
>[    2.989203] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
>[    2.989216] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003801 0  ACK POWER OWNER sig=j CONNECT
>[    2.989224] hub 1-0:1.0: port 8 not reset yet, waiting 50ms
>[    3.040052] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    3.040089] hub 1-3:1.0: state 7 ports 4 chg 0008 evt 0000
>[    3.040355] hub 1-3:1.0: port 3, status 0101, change 0000, 12 Mb/s
>[    3.103370] usb 1-3.3: new high-speed USB device number 8 using ehci_hcd
>[    3.177108] usb 1-3.3: USB quirks for this device: 2
>[    3.177478] usb 1-3.3: default language 0x0409
>[    3.177853] usb 1-3.3: udev 8, busnum 1, minor = 7
>[    3.177861] usb 1-3.3: New USB device found, idVendor=0204, idProduct=6025
>[    3.177866] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    3.177872] usb 1-3.3: Product: Flash Disk
>[    3.177878] usb 1-3.3: Manufacturer: CBM
>[    3.177883] usb 1-3.3: SerialNumber: 20091100413E3509
>[    3.178080] usb 1-3.3: usb_probe_device
>[    3.178087] usb 1-3.3: configuration #1 chosen from 1 choice
>[    3.178239] usb 1-3.3: adding 1-3.3:1.0 (config #1, interface 0)
>[    3.178276] usb-storage 1-3.3:1.0: usb_probe_interface
>[    3.178283] usb-storage 1-3.3:1.0: usb_probe_interface - got id
>[    3.178362] scsi6 : usb-storage 1-3.3:1.0
>[    3.178462] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
>[    3.178472] uhci_hcd 0000:00:1d.3: port 2 portsc 009b,00
>[    3.178484] hub 5-0:1.0: port 2, status 0101, change 0003, 12 Mb/s
>[    3.178488] usb 5-2: USB disconnect, device number 3
>[    3.178491] usb 5-2: unregistering device
>[    3.178494] usb 5-2: unregistering interface 5-2:1.0
>[    3.178638] usb 5-2: usb_disable_device nuking all URBs
>[    3.282070] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>[    3.359905] sky2: driver version 1.30
>[    3.359977] sky2 0000:02:00.0: Yukon-2 EC chip revision 2
>[    3.360109] sky2 0000:02:00.0: irq 45 for MSI/MSI-X
>[    3.360404] sky2 0000:02:00.0: eth0: addr 00:16:cb:88:6c:0f
>[    3.384035] usb 5-2: new full-speed USB device number 4 using uhci_hcd
>[    3.504052] usb 5-2: ep0 maxpacket = 8
>[    3.528572] usb 5-2: skipped 1 descriptor after interface
>[    3.533560] usb 5-2: default language 0x0409
>[    3.551569] usb 5-2: udev 4, busnum 5, minor = 515
>[    3.551579] usb 5-2: New USB device found, idVendor=05ac, idProduct=8240
>[    3.551585] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    3.551591] usb 5-2: Product: IR Receiver
>[    3.551596] usb 5-2: Manufacturer: Apple Computer, Inc.
>[    3.551815] usb 5-2: usb_probe_device
>[    3.551823] usb 5-2: configuration #1 chosen from 1 choice
>[    3.554585] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
>[    3.554672] usbhid 5-2:1.0: usb_probe_interface
>[    3.554678] usbhid 5-2:1.0: usb_probe_interface - got id
>[    3.563059] b43-pci-bridge 0000:03:00.0: enabling device (0000 -> 0002)
>[    3.571087] ssb: Found chip with id 0x4311, rev 0x01 and package 0x00
>[    3.571106] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
>[    3.571122] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
>[    3.571137] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
>[    3.571153] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
>[    3.594132] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
>[    3.629047] b43-phy0: Broadcom 4311 WLAN found (core revision 10)
>[    3.651224] Broadcom 43xx driver loaded [ Features: PL ]
>[    3.830664] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>[    3.830945] Registered led device: b43-phy0::tx
>[    3.830962] Registered led device: b43-phy0::rx
>[    3.830982] Registered led device: b43-phy0::radio
>[    4.180693] scsi 6:0:0:0: Direct-Access     CBM      Flash Disk       5.00 PQ: 0 ANSI: 2
>[    4.180961] sd 6:0:0:0: Attached scsi generic sg2 type 0
>[    4.181524] sd 6:0:0:0: [sdb] 255744 512-byte logical blocks: (130 MB/124 MiB)
>[    4.182955] sd 6:0:0:0: [sdb] Write Protect is off
>[    4.182960] sd 6:0:0:0: [sdb] Mode Sense: 0b 00 00 08
>[    4.183920] sd 6:0:0:0: [sdb] No Caching mode page present
>[    4.183926] sd 6:0:0:0: [sdb] Assuming drive cache: write through
>[    4.186409] sd 6:0:0:0: [sdb] No Caching mode page present
>[    4.186415] sd 6:0:0:0: [sdb] Assuming drive cache: write through
>[    4.187259]  sdb: sdb1
>[    4.189907] sd 6:0:0:0: [sdb] No Caching mode page present
>[    4.189911] sd 6:0:0:0: [sdb] Assuming drive cache: write through
>[    4.189914] sd 6:0:0:0: [sdb] Attached SCSI removable disk
>[    7.051677] usb 5-2: uhci_result_common: failed with status 440000
>[    7.053669] usb 5-2: uhci_result_common: failed with status 440000
>[    7.053815] hid-generic 0003:05AC:8240.0004: hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.3-2/input0
>[    7.053883] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
>[    7.053901] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001002 0  ACK POWER sig=se0 CSC
>[    7.053915] hub 1-0:1.0: port 8, status 0100, change 0001, 12 Mb/s
>[    7.157049] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x100
>[    7.170675] usb 5-1: uhci_result_common: failed with status 440000
>[    7.170704] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
>[    7.204101] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0006
>[    7.204120] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00
>[    7.204138] hub 5-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
>[    7.204145] usb 5-1: USB disconnect, device number 2
>[    7.204150] usb 5-1: unregistering device
>[    7.204156] usb 5-1: unregistering interface 5-1:1.0
>[    7.204234] usb 5-1: usb_disable_device nuking all URBs
>[    7.308045] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
>[    7.308058] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
>[    7.308070] hub 5-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
>[    7.308074] usb 5-2: USB disconnect, device number 4
>[    7.308077] usb 5-2: unregistering device
>[    7.308080] usb 5-2: unregistering interface 5-2:1.0
>[    7.308241] usb 5-2: usb_disable_device nuking all URBs
>[    7.412055] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
>[    7.412065] hub 1-0:1.0: state 7 ports 8 chg 0000 evt ff80
>[    7.412081] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 001803 0  ACK POWER sig=j CSC CONNECT
>[    7.412093] hub 1-0:1.0: port 7, status 0501, change 0001, 480 Mb/s
>[    7.516051] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501
>[    7.567228] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion
>[    7.567238] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003801 0  ACK POWER OWNER sig=j CONNECT
>[    7.567245] hub 1-0:1.0: port 7 not reset yet, waiting 50ms
>[    7.618055] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    7.618089] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0  ACK POWER sig=j CSC CONNECT
>[    7.618100] hub 1-0:1.0: port 8, status 0501, change 0001, 480 Mb/s
>[    7.722060] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x501
>[    7.773233] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
>[    7.773243] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003801 0  ACK POWER OWNER sig=j CONNECT
>[    7.773250] hub 1-0:1.0: port 8 not reset yet, waiting 50ms
>[    7.824050] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    7.824076] hub 1-0:1.0: state 7 ports 8 chg 0000 evt ff80
>[    7.824087] ehci_hcd 0000:00:1d.7: GetStatus port:7 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    7.824099] hub 1-0:1.0: port 7, status 0100, change 0001, 12 Mb/s
>[    7.928060] hub 1-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x100
>[    7.928072] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[    7.928083] hub 1-0:1.0: port 8, status 0100, change 0001, 12 Mb/s
>[    8.032086] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x100
>[    8.032094] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0006
>[    8.032105] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00
>[    8.032112] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
>[    8.136059] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
>[    8.238065] usb 5-1: new full-speed USB device number 5 using uhci_hcd
>[    8.432749] usb 5-1: skipped 1 descriptor after interface
>[    8.432761] usb 5-1: udev 5, busnum 5, minor = 516
>[    8.432767] usb 5-1: New USB device found, idVendor=05ac, idProduct=8206
>[    8.432773] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    8.433030] usb 5-1: usb_probe_device
>[    8.433038] usb 5-1: configuration #1 chosen from 1 choice
>[    8.436757] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
>[    8.436844] btusb 5-1:1.0: usb_probe_interface
>[    8.436850] btusb 5-1:1.0: usb_probe_interface - got id
>[    8.437149] usb 5-1: adding 5-1:1.1 (config #1, interface 1)
>[    8.437247] usb 5-1: adding 5-1:1.2 (config #1, interface 2)
>[    8.437305] btusb 5-1:1.2: usb_probe_interface
>[    8.437309] btusb 5-1:1.2: usb_probe_interface - got id
>[    8.437340] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00
>[    8.437349] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
>[    8.437375] uhci_hcd 0000:00:1d.3: reserve dev 5 ep81-INT, period 1, phase 0, 23 us
>[    8.541075] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>[    8.643052] usb 5-2: new full-speed USB device number 6 using uhci_hcd
>[    8.762054] usb 5-2: ep0 maxpacket = 8
>[    8.789728] usb 5-2: skipped 1 descriptor after interface
>[    8.793743] usb 5-2: default language 0x0409
>[    8.809745] usb 5-2: udev 6, busnum 5, minor = 517
>[    8.809753] usb 5-2: New USB device found, idVendor=05ac, idProduct=8240
>[    8.809759] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    8.809765] usb 5-2: Product: IR Receiver
>[    8.809770] usb 5-2: Manufacturer: Apple Computer, Inc.
>[    8.810031] usb 5-2: usb_probe_device
>[    8.810039] usb 5-2: configuration #1 chosen from 1 choice
>[    8.812759] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
>[    8.812847] usbhid 5-2:1.0: usb_probe_interface
>[    8.812853] usbhid 5-2:1.0: usb_probe_interface - got id
>[   10.673807] uhci_hcd 0000:00:1d.3: release dev 5 ep81-INT, period 1, phase 0, 23 us
>[   12.308836] usb 5-2: uhci_result_common: failed with status 440000
>[   12.310843] usb 5-2: uhci_result_common: failed with status 440000
>[   12.311028] hid-generic 0003:05AC:8240.0005: hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.3-2/input0
>[   12.311098] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
>[   12.454105] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
>[   12.454125] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
>[   12.454144] hub 5-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
>[   12.454151] usb 5-2: USB disconnect, device number 6
>[   12.454157] usb 5-2: unregistering device
>[   12.454162] usb 5-2: unregistering interface 5-2:1.0
>[   12.454430] usb 5-2: usb_disable_device nuking all URBs
>[   12.558071] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
>[   12.614856] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
>[   12.614870] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0  ACK POWER sig=j CSC CONNECT
>[   12.614880] hub 1-0:1.0: port 8, status 0501, change 0001, 480 Mb/s
>[   12.718060] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x501
>[   12.769274] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
>[   12.769287] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003801 0  ACK POWER OWNER sig=j CONNECT
>[   12.769296] hub 1-0:1.0: port 8 not reset yet, waiting 50ms
>[   12.820073] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[   12.820107] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
>[   12.820119] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[   12.820131] hub 1-0:1.0: port 8, status 0100, change 0001, 12 Mb/s
>[   12.924072] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x100
>[   12.954095] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
>[   12.954112] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00
>[   12.954124] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
>[   13.058056] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>[   13.160055] usb 5-2: new full-speed USB device number 7 using uhci_hcd
>[   13.280048] usb 5-2: ep0 maxpacket = 8
>[   13.306896] usb 5-2: skipped 1 descriptor after interface
>[   13.311890] usb 5-2: default language 0x0409
>[   13.329898] usb 5-2: udev 7, busnum 5, minor = 518
>[   13.329907] usb 5-2: New USB device found, idVendor=05ac, idProduct=8240
>[   13.329912] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   13.329918] usb 5-2: Product: IR Receiver
>[   13.329924] usb 5-2: Manufacturer: Apple Computer, Inc.
>[   13.330183] usb 5-2: usb_probe_device
>[   13.330191] usb 5-2: configuration #1 chosen from 1 choice
>[   13.332906] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
>[   13.332989] usbhid 5-2:1.0: usb_probe_interface
>[   13.332995] usbhid 5-2:1.0: usb_probe_interface - got id
>[   16.829998] usb 5-2: uhci_result_common: failed with status 440000
>[   16.831989] usb 5-2: uhci_result_common: failed with status 440000
>[   16.832177] hid-generic 0003:05AC:8240.0006: hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.3-2/input0
>[   16.832243] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
>[   16.832258] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
>[   16.832276] hub 5-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
>[   16.832282] usb 5-2: USB disconnect, device number 7
>[   16.832287] usb 5-2: unregistering device
>[   16.832293] usb 5-2: unregistering interface 5-2:1.0
>[   16.832512] usb 5-2: usb_disable_device nuking all URBs
>[   16.937066] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
>[   17.136003] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
>[   17.136045] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0  ACK POWER sig=j CSC CONNECT
>[   17.136055] hub 1-0:1.0: port 8, status 0501, change 0001, 480 Mb/s
>[   17.240073] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x501
>[   17.291302] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
>[   17.291315] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003801 0  ACK POWER OWNER sig=j CONNECT
>[   17.291324] hub 1-0:1.0: port 8 not reset yet, waiting 50ms
>[   17.342064] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[   17.342099] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
>[   17.342111] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[   17.342123] hub 1-0:1.0: port 8, status 0100, change 0001, 12 Mb/s
>[   17.446061] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x100
>[   17.454101] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
>[   17.454116] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00
>[   17.454129] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
>[   17.558058] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>[   17.660076] usb 5-2: new full-speed USB device number 8 using uhci_hcd
>[   17.782049] usb 5-2: ep0 maxpacket = 8
>[   17.807049] usb 5-2: skipped 1 descriptor after interface
>[   17.812029] usb 5-2: default language 0x0409
>[   17.830046] usb 5-2: udev 8, busnum 5, minor = 519
>[   17.830055] usb 5-2: New USB device found, idVendor=05ac, idProduct=8240
>[   17.830061] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   17.830067] usb 5-2: Product: IR Receiver
>[   17.830072] usb 5-2: Manufacturer: Apple Computer, Inc.
>[   17.830320] usb 5-2: usb_probe_device
>[   17.830328] usb 5-2: configuration #1 chosen from 1 choice
>[   17.833069] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
>[   17.833152] usbhid 5-2:1.0: usb_probe_interface
>[   17.833158] usbhid 5-2:1.0: usb_probe_interface - got id
>[   17.839022] usb 5-2: uhci_result_common: failed with status 440000
>[   17.840023] usb 5-2: uhci_result_common: failed with status 440000
>[   17.840155] hid-generic 0003:05AC:8240.0007: hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.3-2/input0
>[   17.840218] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
>[   17.840233] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
>[   17.840250] hub 5-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
>[   17.840257] usb 5-2: USB disconnect, device number 8
>[   17.840262] usb 5-2: unregistering device
>[   17.840267] usb 5-2: unregistering interface 5-2:1.0
>[   17.840598] usb 5-2: usb_disable_device nuking all URBs
>[   17.945083] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
>[   17.945094] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
>[   17.945112] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0  ACK POWER sig=j CSC CONNECT
>[   17.945124] hub 1-0:1.0: port 8, status 0501, change 0001, 480 Mb/s
>[   18.049060] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x501
>[   18.100327] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
>[   18.100341] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003801 0  ACK POWER OWNER sig=j CONNECT
>[   18.100350] hub 1-0:1.0: port 8 not reset yet, waiting 50ms
>[   18.151041] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[   18.151069] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
>[   18.151076] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[   18.151084] hub 1-0:1.0: port 8, status 0100, change 0001, 12 Mb/s
>[   18.255037] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x100
>[   18.255044] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
>[   18.255053] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00
>[   18.255062] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
>[   18.359042] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>[   18.461076] usb 5-2: new full-speed USB device number 9 using uhci_hcd
>[   18.583049] usb 5-2: ep0 maxpacket = 8
>[   18.608074] usb 5-2: skipped 1 descriptor after interface
>[   18.613052] usb 5-2: default language 0x0409
>[   18.631072] usb 5-2: udev 9, busnum 5, minor = 520
>[   18.631080] usb 5-2: New USB device found, idVendor=05ac, idProduct=8240
>[   18.631086] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   18.631092] usb 5-2: Product: IR Receiver
>[   18.631097] usb 5-2: Manufacturer: Apple Computer, Inc.
>[   18.631346] usb 5-2: usb_probe_device
>[   18.631354] usb 5-2: configuration #1 chosen from 1 choice
>[   18.634075] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
>[   18.634163] usbhid 5-2:1.0: usb_probe_interface
>[   18.634169] usbhid 5-2:1.0: usb_probe_interface - got id
>[   19.663433] EXT4-fs (sda3): re-mounted. Opts: (null)
>[   19.776007] Adding 3911468k swap on /dev/sda4.  Priority:-1 extents:1 across:3911468k 
>[   22.132177] usb 5-2: uhci_result_common: failed with status 440000
>[   22.134166] usb 5-2: uhci_result_common: failed with status 440000
>[   22.134333] hid-generic 0003:05AC:8240.0008: hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.3-2/input0
>[   22.204106] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
>[   22.204127] uhci_hcd 0000:00:1d.3: port 2 portsc 008a,00
>[   22.204145] hub 5-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
>[   22.204153] usb 5-2: USB disconnect, device number 9
>[   22.204158] usb 5-2: unregistering device
>[   22.204164] usb 5-2: unregistering interface 5-2:1.0
>[   22.204430] usb 5-2: usb_disable_device nuking all URBs
>[   22.308066] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
>[   22.437710] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
>[   22.437725] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 001803 0  ACK POWER sig=j CSC CONNECT
>[   22.437735] hub 1-0:1.0: port 8, status 0501, change 0001, 480 Mb/s
>[   22.449938] sky2 0000:02:00.0: eth0: enabling interface
>[   22.450034] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   22.541061] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x501
>[   22.592223] ehci_hcd 0000:00:1d.7: port 8 full speed --> companion
>[   22.592235] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003801 0  ACK POWER OWNER sig=j CONNECT
>[   22.592243] hub 1-0:1.0: port 8 not reset yet, waiting 50ms
>[   22.643071] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[   22.643102] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
>[   22.643114] ehci_hcd 0000:00:1d.7: GetStatus port:8 status 003002 0  ACK POWER OWNER sig=se0 CSC
>[   22.643126] hub 1-0:1.0: port 8, status 0100, change 0001, 12 Mb/s
>[   22.747052] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x100
>[   22.747060] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0004
>[   22.747072] uhci_hcd 0000:00:1d.3: port 2 portsc 0093,00
>[   22.747083] hub 5-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
>[   22.851055] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
>[   22.953052] usb 5-2: new full-speed USB device number 10 using uhci_hcd
>[   23.073045] usb 5-2: ep0 maxpacket = 8
>[   23.098214] usb 5-2: skipped 1 descriptor after interface
>[   23.103210] usb 5-2: default language 0x0409
>[   23.121213] usb 5-2: udev 10, busnum 5, minor = 521
>[   23.121220] usb 5-2: New USB device found, idVendor=05ac, idProduct=8240
>[   23.121226] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[   23.121232] usb 5-2: Product: IR Receiver
>[   23.121237] usb 5-2: Manufacturer: Apple Computer, Inc.
>[   23.121470] usb 5-2: usb_probe_device
>[   23.121478] usb 5-2: configuration #1 chosen from 1 choice
>[   23.124225] usb 5-2: adding 5-2:1.0 (config #1, interface 0)
>[   23.124308] usbhid 5-2:1.0: usb_probe_interface
>[   23.124314] usbhid 5-2:1.0: usb_probe_interface - got id
>[   24.901778] sky2 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
>[   24.901806] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[   25.239629] pci 0000:01:00.0: Invalid ROM contents
>[   25.239723] pci 0000:01:00.0: Invalid ROM contents
>[   25.284937] pci 0000:01:00.0: Invalid ROM contents
>[   25.285051] pci 0000:01:00.0: Invalid ROM contents
>[   25.323978] pci 0000:01:00.0: Invalid ROM contents
>[   25.324099] pci 0000:01:00.0: Invalid ROM contents
>[   25.362850] pci 0000:01:00.0: Invalid ROM contents
>[   25.362943] pci 0000:01:00.0: Invalid ROM contents
>[   25.401685] pci 0000:01:00.0: Invalid ROM contents
>[   25.401778] pci 0000:01:00.0: Invalid ROM contents
>[   25.440923] pci 0000:01:00.0: Invalid ROM contents
>[   25.441034] pci 0000:01:00.0: Invalid ROM contents
>[   33.128540] hid-generic 0003:05AC:8240.0009: timeout initializing reports
>[   33.128672] hid-generic 0003:05AC:8240.0009: hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.3-2/input0

Actions: View

Attachments on bug 26891: 33766 | 56618 | 56619 | 56620 | 65100 | 65357 | 66308 | 67258 | 67314

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.