Attachment 727 Details for Bug 1181 – dmesg output

dmesg output

dmesg.txt (text/plain), 14.30 KB, created by Philip Verhoeven on 2004-08-25 06:29:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Philip Verhoeven

Created: 2004-08-25 06:29:41 UTC

Size: 14.30 KB

patch

obsolete

>Linux version 2.6.8.1 (root@vubserver) (gcc version 3.3.3 20040412 (Gentoo Linux 3.3.3-r6, ssp-3.3.2-2, pie-8.7.6)) #20 Wed Aug 25 14:26:31 CEST 2004
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>1023MB LOWMEM available.
>On node 0 totalpages: 262128
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 258032 pages, LIFO batch:16
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.2 present.
>ACPI: RSDP (v000 Nvidia                                    ) @ 0x000f6d60
>ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
>ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
>ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff74c0
>ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
>Built 1 zonelists
>Initializing CPU#0
>Kernel command line: root=/dev/hda3
>CPU 0 irqstacks, hard=b0423000 soft=b0422000
>PID hash table entries: 4096 (order 12: 32768 bytes)
>Detected 1670.299 MHz processor.
>Using tsc for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
>Memory: 1034680k/1048512k available (2171k kernel code, 13280k reserved, 867k data, 144k init, 0k highmem, 0k BadRAM)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay loop... 3301.37 BogoMIPS (lpj=1650688)
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
>CPU: After vendor identify, caps:  0383fbff c1c3fbff 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU: After all inits, caps:        0383fbff c1c3fbff 00000000 00000020
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: AMD Athlon(tm) XP 2000+ stepping 00
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>ACPI: IRQ9 SCI: Edge set to Level Trigger.
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040715
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
>SCSI subsystem initialized
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>** PCI interrupts are no longer routed automatically.  If this
>** causes a device to stop working, it is probably because the
>** driver failed to call pci_enable_device().  As a temporary
>** workaround, the "pci=routeirq" argument restores the old
>** behavior.  If this argument makes the device work again,
>** please email the output of "lspci" to bjorn.helgaas@hp.com
>** so I can fix the driver.
>ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5
>ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 5 (level, low) -> IRQ 5
>radeonfb: Found Intel x86 BIOS ROM Image
>radeonfb: Retreived PLL infos from BIOS
>radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=275.00 Mhz, System=260.00 MHz
>radeonfb: Monitor 1 type CRT found
>radeonfb: Monitor 2 type no found
>radeonfb: ATI Radeon If  DDR SGRAM 128 MB
>vesafb: ATI Technologies Inc., V250, 01.00 (OEM: ATI RADEON RV250)
>vesafb: VBE version: 2.0
>vesafb: protected mode interface info at c000:572a
>vesafb: pmi: set display start = b00c57be, set palette = b00c580a
>vesafb: pmi: ports = b010 b016 b054 b038 b03c b05c b000 b004 b0b0 b0b2 b0b4 
>vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz
>vesafb: scrolling: redraw
>vesafb: cannot reserve video memory at 0xd8000000
>vesafb: framebuffer at 0xd8000000, mapped to 0xf1900000, size 16384k
>fb1: VESA VGA frame buffer device
>audit: initializing netlink socket (disabled)
>audit(1093436980.521:0): initialized
>devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
>devfs: boot_options: 0x0
>ACPI: Power Button (FF) [PWRF]
>ACPI: Processor [CPU0] (supports C1)
>Linux agpgart interface v0.100 (c) Dave Jones
>agpgart: Detected NVIDIA nForce2 chipset
>agpgart: Maximum main memory to use for agp memory: 941M
>agpgart: AGP aperture is 128M @ 0xd0000000
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>floppy: controller ACPI FDC0 at I/O 0x3f7-0x3f7 irq 6 dma channel 2
>Using cfq io scheduler
>Floppy drive(s): fd0 is 1.44M
>floppy0: Floppy io-port 0x03f7 in use
>loop: loaded (max 8 devices)
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE2: IDE controller at PCI slot 0000:00:09.0
>NFORCE2: chipset revision 162
>NFORCE2: not 100% native mode: will probe irqs later
>NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
>NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: IC35L060AVVA07-0, ATA DISK drive
>hdb: WDC WD200EB-00CSF0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>SiI3112 Serial ATA: IDE controller at PCI slot 0000:01:0b.0
>ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
>ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
>SiI3112 Serial ATA: chipset revision 2
>SiI3112 Serial ATA: 100% native mode on irq 11
>    ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio
>    ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
>Probing IDE interface ide2...
>hde: Maxtor 6Y120M0, ATA DISK drive
>ide2 at 0xf080e080-0xf080e087,0xf080e08a on irq 11
>Probing IDE interface ide3...
>hdg: Maxtor 6Y160M0, ATA DISK drive
>ide3 at 0xf080e0c0-0xf080e0c7,0xf080e0ca on irq 11
>Probing IDE interface ide1...
>Probing IDE interface ide4...
>ide4: Wait for ready failed before probe !
>Probing IDE interface ide5...
>ide5: Wait for ready failed before probe !
>hda: max request size: 128KiB
>hda: 120103200 sectors (61492 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
>hda: cache flushes supported
> /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
>hdb: max request size: 128KiB
>hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(100)
>hdb: cache flushes supported
> /dev/ide/host0/bus0/target1/lun0: p1
>hde: max request size: 64KiB
>hde: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63
>hde: cache flushes supported
> /dev/ide/host2/bus0/target0/lun0: p1 p2 < p5 >
>hdg: max request size: 64KiB
>hdg: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63
>hdg: cache flushes supported
> /dev/ide/host2/bus1/target0/lun0: p1 p2
>libata version 1.02 loaded.
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
>ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 10 (level, low) -> IRQ 10
>ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
>PCI: Setting latency timer of device 0000:00:02.2 to 64
>ehci_hcd 0000:00:02.2: irq 10, pci mem f0818000
>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.2
>ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ohci_hcd: block sizes: ed 64 td 64
>ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
>ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11
>ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: irq 11, pci mem f081a000
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 5
>ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 5 (level, low) -> IRQ 5
>ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ohci_hcd 0000:00:02.1: irq 5, pci mem f081c000
>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>USB Universal Host Controller Interface driver v2.2
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
>ohci_hcd 0000:00:02.1: wakeup
>NET: Registered protocol family 2
>IP: routing cache hash table of 8192 buckets, 64Kbytes
>TCP: Hash tables configured (established 262144 bind 65536)
>ip_conntrack version 2.1 (8191 buckets, 65528 max) - 296 bytes per conntrack
>ip_tables: (C) 2000-2002 Netfilter core team
>usb 3-2: new low speed USB device using address 2
>ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
>arp_tables: (C) 2002 David S. Miller
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ReiserFS: hda3: found reiserfs format "3.6" with standard journal
>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:02.1-2
>input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-2
>ReiserFS: hda3: using ordered data mode
>ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda3: checking transaction log (hda3)
>ReiserFS: hda3: Using r5 hash to sort names
>VFS: Mounted root (reiserfs filesystem) readonly.
>Freeing unused kernel memory: 144k freed
>Adding 506036k swap on /dev/hda2.  Priority:-1 extents:1
>ndiswrapper version 0.9 loaded
>ndiswrapper: driver bcmwl5.sys added
>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
>ACPI: PCI interrupt 0000:01:09.0[A] -> GSI 10 (level, low) -> IRQ 10
>ndiswrapper: using irq 10
>wlan0: ndiswrapper ethernet device 00:0c:41:19:89:61 using driver bcmwl5.sys
>ndiswrapper device wlan0 supports WPA with AES/CCMP and TKIP ciphers
>ReiserFS: hdg2: found reiserfs format "3.6" with standard journal
>ReiserFS: hdg2: using ordered data mode
>ReiserFS: hdg2: journal params: device hdg2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hdg2: checking transaction log (hdg2)
>ReiserFS: hdg2: Using r5 hash to sort names
>ReiserFS: hdb1: found reiserfs format "3.6" with standard journal
>ReiserFS: hdb1: using ordered data mode
>ReiserFS: hdb1: journal params: device hdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hdb1: checking transaction log (hdb1)
>ReiserFS: hdb1: Using r5 hash to sort names
>ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 5 (level, low) -> IRQ 5
>fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
>[fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
>ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 5 (level, low) -> IRQ 5
>[fglrx] module loaded - fglrx 3.11.1 [Aug  4 2004] on minor 0
>[fglrx] AGP detected, AgpState   = 0x1f000217 (hardware caps of chipset)
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
>[fglrx] AGP enabled,  AgpCommand = 0x1f000314 (selected caps)
>[fglrx] free  AGP = 121909248
>[fglrx] max   AGP = 121909248
>[fglrx] free  LFB = 122683392
>[fglrx] max   LFB = 122683392
>[fglrx] free  Inv = 0
>[fglrx] max   Inv = 0
>[fglrx] total Inv = 0
>[fglrx] total TIM = 0
>[fglrx] total FB  = 0
>[fglrx] total AGP = 32768

Actions: View

Attachments on bug 1181: 725 | 726 | 727

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.