Attachment 72975 Details for Bug 54111 – new_moudle_reload.dmesg

new_moudle_reload.dmesg

new_moudle_reload.dmesg (text/plain), 113.71 KB, created by yanbing on 2013-01-14 02:19:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: yanbing

Created: 2013-01-14 02:19:33 UTC

Size: 113.71 KB

patch

obsolete

>[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ef000
>[    0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
>[    0.000000] PM: Registered nosave memory: 0000000077630000 - 0000000077640000
>[    0.000000] PM: Registered nosave memory: 0000000077646000 - 0000000077648000
>[    0.000000] PM: Registered nosave memory: 000000007b3e2000 - 000000007b5e2000
>[    0.000000] PM: Registered nosave memory: 000000007b893000 - 000000007b89b000
>[    0.000000] PM: Registered nosave memory: 000000007b8bf000 - 000000007b8cf000
>[    0.000000] PM: Registered nosave memory: 000000007b8cf000 - 000000007b9cf000
>[    0.000000] PM: Registered nosave memory: 000000007b9cf000 - 000000007b9ff000
>[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007b600000 s79872 r8192 d22528 u524288
>[    0.000000] pcpu-alloc: s79872 r8192 d22528 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 497479
>[    0.000000] Policy zone: DMA32
>[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-rc3_drm-fixes_4ddf4b_20130114+ root=UUID=f7cc7c9d-b77b-49c2-a2dd-1427d5bd4919 ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True KEYTABLE=us rd.luks=0 LANG=en_US.UTF-8 rhgb quiet i915.preliminary_hw_support=1 drm.debug=0xe
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] __ex_table already sorted, skipping sort
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 1952712k/2025472k available (4856k kernel code, 3884k absent, 68876k reserved, 6014k data, 588k init)
>[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
>[    0.000000] NR_IRQS:4352 nr_irqs:712 16
>[    0.000000] Extended CMOS year: 2000
>[    0.000000] Console: colour dummy device 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
>[    0.000000] ... MAX_LOCK_DEPTH:          48
>[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
>[    0.000000] ... CLASSHASH_SIZE:          4096
>[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
>[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
>[    0.000000] ... CHAINHASH_SIZE:          16384
>[    0.000000]  memory used by lock dependency info: 5855 kB
>[    0.000000]  per task-struct memory footprint: 1920 bytes
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 2526.905 MHz processor
>[    0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.81 BogoMIPS (lpj=2526905)
>[    0.001007] pid_max: default: 32768 minimum: 301
>[    0.001076] Security Framework initialized
>[    0.002058] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.003347] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>[    0.003934] Mount-cache hash table entries: 256
>[    0.004680] Initializing cgroup subsys cpuacct
>[    0.004742] Disabled fast string operations
>[    0.004748] CPU: Physical Processor ID: 0
>[    0.004749] CPU: Processor Core ID: 0
>[    0.004752] mce: CPU supports 6 MCE banks
>[    0.004758] CPU0: Thermal monitoring handled by SMI
>[    0.004762] process: using mwait in idle threads
>[    0.004767] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
>[    0.004767] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
>[    0.004767] tlb_flushall_shift: -1
>[    0.004873] Freeing SMP alternatives: 20k freed
>[    0.004894] ACPI: Core revision 20121018
>[    0.019728] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.029847] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz (fam: 06, model: 17, stepping: 06)
>[    0.030000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
>[    0.030000] ... version:                2
>[    0.030000] ... bit width:              40
>[    0.030000] ... generic registers:      2
>[    0.030000] ... value mask:             000000ffffffffff
>[    0.030000] ... max period:             000000007fffffff
>[    0.030000] ... fixed-purpose events:   3
>[    0.030000] ... event mask:             0000000700000003
>[    0.030000] SMP alternatives: lockdep: fixing up alternatives
>[    0.002000] CPU1: Thermal monitoring handled by SMI
>[    0.030000] smpboot: Booting Node   0, Processors  #1
>[    0.042099] Brought up 2 CPUs
>[    0.042103] smpboot: Total of 2 processors activated (10107.62 BogoMIPS)
>[    0.043253] devtmpfs: initialized
>[    0.044353] PM: Registering ACPI NVS region [mem 0x77630000-0x7763ffff] (65536 bytes)
>[    0.044358] PM: Registering ACPI NVS region [mem 0x7b3e2000-0x7b5e1fff] (2097152 bytes)
>[    0.044422] PM: Registering ACPI NVS region [mem 0x7b8cf000-0x7b9cefff] (1048576 bytes)
>[    0.044459] reboot: BIOS series board detected. Selecting HP Compaq Laptop-method for reboots.
>[    0.044631] RTC time: 13:43:58, date: 01/14/13
>[    0.044794] NET: Registered protocol family 16
>[    0.046139] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.046151] ACPI: bus type pci registered
>[    0.046172] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.046172] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    0.073490] PCI: Using configuration type 1 for base access
>[    0.074063] mtrr: your CPUs had inconsistent variable MTRR settings
>[    0.074063] mtrr: probably your BIOS does not setup all CPUs.
>[    0.074063] mtrr: corrected configuration.
>[    0.084074] bio: create slab <bio-0> at 0
>[    0.085072] ACPI: Added _OSI(Module Device)
>[    0.085072] ACPI: Added _OSI(Processor Device)
>[    0.085072] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.085072] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.091792] ACPI: EC: Look up EC in DSDT
>[    0.112084] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.133245] ACPI: SSDT 000000007b8c6c18 00275 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
>[    0.134978] ACPI: Dynamic OEM Table Load:
>[    0.134982] ACPI: SSDT           (null) 00275 (v01  PmRef  Cpu0Ist 00003000 INTL 20060912)
>[    0.135144] ACPI: SSDT 000000007b8c4618 0057B (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
>[    0.136863] ACPI: Dynamic OEM Table Load:
>[    0.136866] ACPI: SSDT           (null) 0057B (v01  PmRef  Cpu0Cst 00003001 INTL 20060912)
>[    0.142337] ACPI: SSDT 000000007b8c5e18 001D7 (v01  PmRef    ApIst 00003000 INTL 20060912)
>[    0.144104] ACPI: Dynamic OEM Table Load:
>[    0.144107] ACPI: SSDT           (null) 001D7 (v01  PmRef    ApIst 00003000 INTL 20060912)
>[    0.147133] ACPI: SSDT 000000007b8c6f18 0008D (v01  PmRef    ApCst 00003000 INTL 20060912)
>[    0.148879] ACPI: Dynamic OEM Table Load:
>[    0.148882] ACPI: SSDT           (null) 0008D (v01  PmRef    ApCst 00003000 INTL 20060912)
>[    0.392156] ACPI: Interpreter enabled
>[    0.392162] ACPI: (supports S0 S3 S4 S5)
>[    0.392200] ACPI: Using IOAPIC for interrupt routing
>[    0.395244] ACPI: Power Resource [APPR] (off)
>[    0.415211] ACPI: Power Resource [PFN0] (off)
>[    0.415211] ACPI: Power Resource [PFN1] (off)
>[    0.416077] ACPI: Power Resource [PFN2] (off)
>[    0.416129] ACPI: Power Resource [PFN3] (off)
>[    0.416129] ACPI: Power Resource [PFN4] (off)
>[    0.418231] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
>[    0.418358] ACPI: No dock devices found.
>[    0.418362] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.419178] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.419183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.421256] pci_root PNP0A08:00: Requesting ACPI _OSC control (0x1d)
>[    0.423561] pci_root PNP0A08:00: ACPI _OSC control (0x1d) granted
>[    0.424629] PCI host bridge to bus 0000:00
>[    0.424629] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.424629] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.424629] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.424629] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.424629] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff]
>[    0.424629] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
>[    0.424629] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
>[    0.424629] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
>[    0.424629] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
>[    0.424629] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
>[    0.424629] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
>[    0.424629] pci 0000:00:02.0: reg 20: [io  0x70f0-0x70f7]
>[    0.424629] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
>[    0.424629] pci 0000:00:02.1: reg 10: [mem 0x90400000-0x904fffff 64bit]
>[    0.425087] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
>[    0.425159] pci 0000:00:1a.0: reg 20: [io  0x70c0-0x70df]
>[    0.425247] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
>[    0.425318] pci 0000:00:1a.1: reg 20: [io  0x70a0-0x70bf]
>[    0.425405] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
>[    0.425477] pci 0000:00:1a.2: reg 20: [io  0x7080-0x709f]
>[    0.425578] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
>[    0.425611] pci 0000:00:1a.7: reg 10: [mem 0x98904c00-0x98904fff]
>[    0.425752] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>[    0.425828] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
>[    0.425854] pci 0000:00:1b.0: reg 10: [mem 0x98900000-0x98903fff 64bit]
>[    0.425980] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.426020] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
>[    0.426151] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.426190] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
>[    0.426319] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.426358] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
>[    0.426488] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.426529] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
>[    0.426659] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>[    0.426698] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
>[    0.426828] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>[    0.426870] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
>[    0.426941] pci 0000:00:1d.0: reg 20: [io  0x7060-0x707f]
>[    0.427033] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
>[    0.427105] pci 0000:00:1d.1: reg 20: [io  0x7040-0x705f]
>[    0.427192] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
>[    0.427264] pci 0000:00:1d.2: reg 20: [io  0x7020-0x703f]
>[    0.427364] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
>[    0.427397] pci 0000:00:1d.7: reg 10: [mem 0x98904800-0x98904bff]
>[    0.427537] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.427573] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
>[    0.427688] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
>[    0.427891] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
>[    0.427926] pci 0000:00:1f.2: reg 10: [io  0x70e8-0x70ef]
>[    0.427940] pci 0000:00:1f.2: reg 14: [io  0x70fc-0x70ff]
>[    0.427955] pci 0000:00:1f.2: reg 18: [io  0x70e0-0x70e7]
>[    0.427969] pci 0000:00:1f.2: reg 1c: [io  0x70f8-0x70fb]
>[    0.427984] pci 0000:00:1f.2: reg 20: [io  0x7000-0x701f]
>[    0.427998] pci 0000:00:1f.2: reg 24: [mem 0x98904000-0x989047ff]
>[    0.428089] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.428193] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.428203] pci 0000:00:1c.0:   bridge window [mem 0x98800000-0x988fffff]
>[    0.428317] pci 0000:02:00.0: [8086:4237] type 00 class 0x028000
>[    0.428363] pci 0000:02:00.0: reg 10: [mem 0x98700000-0x98701fff 64bit]
>[    0.428587] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
>[    0.430040] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.430050] pci 0000:00:1c.1:   bridge window [mem 0x98700000-0x987fffff]
>[    0.430132] pci 0000:00:1c.2: PCI bridge to [bus 03-43]
>[    0.430139] pci 0000:00:1c.2:   bridge window [io  0x5000-0x6fff]
>[    0.430145] pci 0000:00:1c.2:   bridge window [mem 0x94700000-0x986fffff]
>[    0.430224] pci 0000:00:1c.4: PCI bridge to [bus 44-84]
>[    0.430231] pci 0000:00:1c.4:   bridge window [io  0x3000-0x4fff]
>[    0.430237] pci 0000:00:1c.4:   bridge window [mem 0x90700000-0x946fffff]
>[    0.430466] pci 0000:85:00.0: [11ab:436c] type 00 class 0x020000
>[    0.430619] pci 0000:85:00.0: reg 10: [mem 0x90600000-0x90603fff 64bit]
>[    0.430703] pci 0000:85:00.0: reg 18: [io  0x2000-0x20ff]
>[    0.431031] pci 0000:85:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
>[    0.431510] pci 0000:85:00.0: supports D1 D2
>[    0.431513] pci 0000:85:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.431755] pci 0000:00:1c.5: PCI bridge to [bus 85]
>[    0.431761] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
>[    0.431767] pci 0000:00:1c.5:   bridge window [mem 0x90600000-0x906fffff]
>[    0.431891] pci 0000:00:1e.0: PCI bridge to [bus 86] (subtractive decode)
>[    0.431901] pci 0000:00:1e.0:   bridge window [mem 0x90500000-0x905fffff]
>[    0.431910] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.431913] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.431916] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.431919] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
>[    0.431922] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfedfffff] (subtractive decode)
>[    0.431925] pci 0000:00:1e.0:   bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
>[    0.432078] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>[    0.432154] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>[    0.432239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>[    0.432390] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
>[    0.432541] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
>[    0.432701] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>[    0.451083] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.451166] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>[    0.451251] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.451334] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>[    0.451418] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.451499] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>[    0.451580] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>[    0.451664] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>[    0.452127] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.452127] vgaarb: loaded
>[    0.452127] vgaarb: bridge control possible 0000:00:02.0
>[    0.452170] SCSI subsystem initialized
>[    0.452170] ACPI: bus type scsi registered
>[    0.452170] libata version 3.00 loaded.
>[    0.453043] ACPI: bus type usb registered
>[    0.453065] usbcore: registered new interface driver usbfs
>[    0.453065] usbcore: registered new interface driver hub
>[    0.453065] usbcore: registered new device driver usb
>[    0.453065] PCI: Using ACPI for IRQ routing
>[    0.465133] PCI: pci_cache_line_size set to 64 bytes
>[    0.465252] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
>[    0.465255] e820: reserve RAM buffer [mem 0x77630000-0x77ffffff]
>[    0.465257] e820: reserve RAM buffer [mem 0x77646000-0x77ffffff]
>[    0.465260] e820: reserve RAM buffer [mem 0x7b3e2000-0x7bffffff]
>[    0.465262] e820: reserve RAM buffer [mem 0x7b893000-0x7bffffff]
>[    0.465265] e820: reserve RAM buffer [mem 0x7b8bf000-0x7bffffff]
>[    0.465267] e820: reserve RAM buffer [mem 0x7ba00000-0x7bffffff]
>[    0.465298] NetLabel: Initializing
>[    0.465298] NetLabel:  domain hash size = 128
>[    0.465298] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.465298] NetLabel:  unlabeled traffic allowed by default
>[    0.466040] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
>[    0.466047] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>[    0.466052] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>[    0.468050] Switching to clocksource hpet
>[    0.474531] pnp: PnP ACPI init
>[    0.474554] ACPI: bus type pnp registered
>[    0.474798] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.474803] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
>[    0.474806] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.474809] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.474813] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.474817] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.474820] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.474824] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
>[    0.474845] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.475538] pnp 00:01: [dma 4]
>[    0.475659] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.475777] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.475959] system 00:03: [io  0xfe00-0xfe0f] has been reserved
>[    0.475963] system 00:03: [io  0xfe80-0xfe8f] has been reserved
>[    0.475966] system 00:03: [mem 0xfed40000-0xfed44fff] has been reserved
>[    0.475972] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.476245] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
>[    0.476251] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
>[    0.476391] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.476545] system 00:06: [io  0x0200-0x027f] has been reserved
>[    0.476549] system 00:06: [io  0x1000-0x1003] has been reserved
>[    0.476553] system 00:06: [io  0x1010-0x101f] has been reserved
>[    0.476556] system 00:06: [io  0xffff] has been reserved
>[    0.476559] system 00:06: [io  0x0400-0x047f] has been reserved
>[    0.476563] system 00:06: [io  0x0500-0x057f] has been reserved
>[    0.476566] system 00:06: [io  0xef80-0xef9f] has been reserved
>[    0.476571] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.476701] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.476995] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.477143] pnp 00:09: Plug and Play ACPI device, IDs SYN0157 SYN0100 SYN0002 PNP0f13 (active)
>[    0.477309] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active)
>[    0.477475] pnp: PnP ACPI: found 11 devices
>[    0.477478] ACPI: ACPI bus type pnp unregistered
>[    0.490202] pci 0000:85:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
>[    0.490222] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
>[    0.490226] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
>[    0.490240] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
>[    0.490244] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
>[    0.490258] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-43] add_size 200000
>[    0.490272] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 44-84] add_size 200000
>[    0.490286] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff pref] to [bus 85] add_size 200000
>[    0.490305] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.490308] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.490311] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.490314] pci 0000:00:1c.4: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.490318] pci 0000:00:1c.5: res[9]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
>[    0.490321] pci 0000:00:1c.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.490324] pci 0000:00:1c.1: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.490330] pci 0000:00:1c.0: BAR 9: assigned [mem 0x98a00000-0x98bfffff 64bit pref]
>[    0.490334] pci 0000:00:1c.1: BAR 9: assigned [mem 0x98c00000-0x98dfffff 64bit pref]
>[    0.490339] pci 0000:00:1c.2: BAR 9: assigned [mem 0x98e00000-0x98ffffff 64bit pref]
>[    0.490343] pci 0000:00:1c.4: BAR 9: assigned [mem 0x99000000-0x991fffff 64bit pref]
>[    0.490348] pci 0000:00:1c.5: BAR 9: assigned [mem 0x99200000-0x994fffff pref]
>[    0.490352] pci 0000:00:1c.0: BAR 7: assigned [io  0x8000-0x8fff]
>[    0.490356] pci 0000:00:1c.1: BAR 7: assigned [io  0x9000-0x9fff]
>[    0.490361] pci 0000:00:1c.0: PCI bridge to [bus 01]
>[    0.490366] pci 0000:00:1c.0:   bridge window [io  0x8000-0x8fff]
>[    0.490374] pci 0000:00:1c.0:   bridge window [mem 0x98800000-0x988fffff]
>[    0.490381] pci 0000:00:1c.0:   bridge window [mem 0x98a00000-0x98bfffff 64bit pref]
>[    0.490390] pci 0000:00:1c.1: PCI bridge to [bus 02]
>[    0.490394] pci 0000:00:1c.1:   bridge window [io  0x9000-0x9fff]
>[    0.490402] pci 0000:00:1c.1:   bridge window [mem 0x98700000-0x987fffff]
>[    0.490408] pci 0000:00:1c.1:   bridge window [mem 0x98c00000-0x98dfffff 64bit pref]
>[    0.490418] pci 0000:00:1c.2: PCI bridge to [bus 03-43]
>[    0.490422] pci 0000:00:1c.2:   bridge window [io  0x5000-0x6fff]
>[    0.490430] pci 0000:00:1c.2:   bridge window [mem 0x94700000-0x986fffff]
>[    0.490436] pci 0000:00:1c.2:   bridge window [mem 0x98e00000-0x98ffffff 64bit pref]
>[    0.490445] pci 0000:00:1c.4: PCI bridge to [bus 44-84]
>[    0.490450] pci 0000:00:1c.4:   bridge window [io  0x3000-0x4fff]
>[    0.490457] pci 0000:00:1c.4:   bridge window [mem 0x90700000-0x946fffff]
>[    0.490463] pci 0000:00:1c.4:   bridge window [mem 0x99000000-0x991fffff 64bit pref]
>[    0.490474] pci 0000:85:00.0: BAR 6: assigned [mem 0x99200000-0x9921ffff pref]
>[    0.490477] pci 0000:00:1c.5: PCI bridge to [bus 85]
>[    0.490482] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
>[    0.490489] pci 0000:00:1c.5:   bridge window [mem 0x90600000-0x906fffff]
>[    0.490495] pci 0000:00:1c.5:   bridge window [mem 0x99200000-0x994fffff pref]
>[    0.490505] pci 0000:00:1e.0: PCI bridge to [bus 86]
>[    0.490513] pci 0000:00:1e.0:   bridge window [mem 0x90500000-0x905fffff]
>[    0.490582] pci 0000:00:1e.0: setting latency timer to 64
>[    0.490588] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.490590] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.490593] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.490596] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff]
>[    0.490599] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
>[    0.490602] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
>[    0.490605] pci_bus 0000:01: resource 0 [io  0x8000-0x8fff]
>[    0.490607] pci_bus 0000:01: resource 1 [mem 0x98800000-0x988fffff]
>[    0.490610] pci_bus 0000:01: resource 2 [mem 0x98a00000-0x98bfffff 64bit pref]
>[    0.490613] pci_bus 0000:02: resource 0 [io  0x9000-0x9fff]
>[    0.490616] pci_bus 0000:02: resource 1 [mem 0x98700000-0x987fffff]
>[    0.490619] pci_bus 0000:02: resource 2 [mem 0x98c00000-0x98dfffff 64bit pref]
>[    0.490622] pci_bus 0000:03: resource 0 [io  0x5000-0x6fff]
>[    0.490625] pci_bus 0000:03: resource 1 [mem 0x94700000-0x986fffff]
>[    0.490628] pci_bus 0000:03: resource 2 [mem 0x98e00000-0x98ffffff 64bit pref]
>[    0.490631] pci_bus 0000:44: resource 0 [io  0x3000-0x4fff]
>[    0.490634] pci_bus 0000:44: resource 1 [mem 0x90700000-0x946fffff]
>[    0.490636] pci_bus 0000:44: resource 2 [mem 0x99000000-0x991fffff 64bit pref]
>[    0.490639] pci_bus 0000:85: resource 0 [io  0x2000-0x2fff]
>[    0.490642] pci_bus 0000:85: resource 1 [mem 0x90600000-0x906fffff]
>[    0.490645] pci_bus 0000:85: resource 2 [mem 0x99200000-0x994fffff pref]
>[    0.490648] pci_bus 0000:86: resource 1 [mem 0x90500000-0x905fffff]
>[    0.490651] pci_bus 0000:86: resource 4 [io  0x0000-0x0cf7]
>[    0.490653] pci_bus 0000:86: resource 5 [io  0x0d00-0xffff]
>[    0.490656] pci_bus 0000:86: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.490659] pci_bus 0000:86: resource 7 [mem 0x80000000-0xdfffffff]
>[    0.490661] pci_bus 0000:86: resource 8 [mem 0xf0000000-0xfedfffff]
>[    0.490664] pci_bus 0000:86: resource 9 [mem 0xfee01000-0xffffffff]
>[    0.490719] NET: Registered protocol family 2
>[    0.491089] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
>[    0.491289] TCP bind hash table entries: 16384 (order: 8, 1048576 bytes)
>[    0.492488] TCP: Hash tables configured (established 16384 bind 16384)
>[    0.492556] TCP: reno registered
>[    0.492575] UDP hash table entries: 1024 (order: 5, 163840 bytes)
>[    0.492747] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes)
>[    0.493048] NET: Registered protocol family 1
>[    0.493262] RPC: Registered named UNIX socket transport module.
>[    0.493265] RPC: Registered udp transport module.
>[    0.493267] RPC: Registered tcp transport module.
>[    0.493269] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.493278] pci 0000:00:02.0: Boot video device
>[    0.493644] PCI: CLS 64 bytes, default 64
>[    0.493781] Trying to unpack rootfs image as initramfs...
>[    0.807399] Freeing initrd memory: 14884k freed
>[    0.816577] audit: initializing netlink socket (disabled)
>[    0.816617] type=2000 audit(1358171037.815:1): initialized
>[    0.849694] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.857479] VFS: Disk quotas dquot_6.5.2
>[    0.857617] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.858657] NFS: Registering the id_resolver key type
>[    0.858732] Key type id_resolver registered
>[    0.858735] Key type id_legacy registered
>[    0.858743] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.860619] Btrfs loaded
>[    0.860627] msgmni has been set to 3843
>[    0.861377] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    0.861391] io scheduler noop registered
>[    0.861394] io scheduler deadline registered
>[    0.861613] io scheduler cfq registered (default)
>[    0.861954] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
>[    0.862383] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
>[    0.862776] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
>[    0.863192] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
>[    0.863576] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
>[    0.864030] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.864374] vesafb: mode is 1024x768x32, linelength=4096, pages=0
>[    0.864376] vesafb: scrolling: redraw
>[    0.864379] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>[    0.864768] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90010500000, using 3072k, total 3072k
>[    0.889526] Console: switching to colour frame buffer device 128x48
>[    0.911535] fb0: VESA VGA frame buffer device
>[    0.911950] ACPI: Fan [FAN0] (off)
>[    0.912127] ACPI: Fan [FAN1] (off)
>[    0.912286] ACPI: Fan [FAN2] (off)
>[    0.912436] ACPI: Fan [FAN3] (off)
>[    0.912589] ACPI: Fan [FAN4] (off)
>[    0.912739] ACPI: Requesting acpi_cpufreq
>[    0.916249] Monitor-Mwait will be used to enter C-1 state
>[    0.916258] Monitor-Mwait will be used to enter C-2 state
>[    0.916263] tsc: Marking TSC unstable due to TSC halts in idle
>[    0.916301] ACPI: acpi_idle registered with cpuidle
>[    0.938129] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.938132] ACPI: Thermal Zone [DTSZ] (52 C)
>[    0.953699] thermal LNXTHERM:01: registered as thermal_zone1
>[    0.953702] ACPI: Thermal Zone [CPUZ] (56 C)
>[    0.958930] thermal LNXTHERM:02: registered as thermal_zone2
>[    0.958933] ACPI: Thermal Zone [SKNZ] (35 C)
>[    0.975099] thermal LNXTHERM:03: registered as thermal_zone3
>[    0.975102] ACPI: Thermal Zone [BATZ] (30 C)
>[    0.980818] thermal LNXTHERM:04: registered as thermal_zone4
>[    0.980820] ACPI: Thermal Zone [FDTZ] (30 C)
>[    0.981026] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.982743] Non-volatile memory driver v1.3
>[    0.982746] Linux agpgart interface v0.103
>[    0.983195] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
>[    0.983279] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
>[    0.985148] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
>[    0.985469] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
>[    0.990217] brd: module loaded
>[    0.990255] ahci 0000:00:1f.2: version 3.0
>[    0.990347] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
>[    0.990425] ahci: SSS flag set, parallel bus scan disabled
>[    0.990460] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
>[    0.990465] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems 
>[    0.990471] ahci 0000:00:1f.2: setting latency timer to 64
>[    0.996136] scsi0 : ahci
>[    0.996492] scsi1 : ahci
>[    0.996719] scsi2 : ahci
>[    0.996943] scsi3 : ahci
>[    0.997231] scsi4 : ahci
>[    0.997471] scsi5 : ahci
>[    0.997662] ata1: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904100 irq 45
>[    0.997666] ata2: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904180 irq 45
>[    0.997668] ata3: DUMMY
>[    0.997669] ata4: DUMMY
>[    0.997671] ata5: DUMMY
>[    0.997674] ata6: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904380 irq 45
>[    0.998282] usbcore: registered new interface driver zd1201
>[    0.998357] usbcore: registered new interface driver catc
>[    0.998429] usbcore: registered new interface driver kaweth
>[    0.998432] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver
>[    0.998504] usbcore: registered new interface driver pegasus
>[    0.998580] usbcore: registered new interface driver rtl8150
>[    0.998659] usbcore: registered new interface driver asix
>[    0.998732] usbcore: registered new interface driver cdc_ether
>[    0.998807] usbcore: registered new interface driver dm9601
>[    0.998881] usbcore: registered new interface driver gl620a
>[    0.998949] usbcore: registered new interface driver net1080
>[    0.999038] usbcore: registered new interface driver plusb
>[    0.999105] usbcore: registered new interface driver rndis_host
>[    0.999178] usbcore: registered new interface driver cdc_subset
>[    0.999251] usbcore: registered new interface driver zaurus
>[    0.999324] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    0.999400] usbcore: registered new interface driver cdc_ncm
>[    0.999717] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.999719] ehci-pci: EHCI PCI platform driver
>[    0.999754] ehci-pci 0000:00:1a.7: setting latency timer to 64
>[    0.999759] ehci-pci 0000:00:1a.7: EHCI Host Controller
>[    1.000147] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
>[    1.004106] ehci-pci 0000:00:1a.7: debug port 1
>[    1.004116] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
>[    1.004145] ehci-pci 0000:00:1a.7: irq 19, io mem 0x98904c00
>[    1.010030] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>[    1.010137] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.010140] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.010144] usb usb1: Product: EHCI Host Controller
>[    1.010147] usb usb1: Manufacturer: Linux 3.8.0-rc3_drm-fixes_4ddf4b_20130114+ ehci_hcd
>[    1.010149] usb usb1: SerialNumber: 0000:00:1a.7
>[    1.010794] hub 1-0:1.0: USB hub found
>[    1.010823] hub 1-0:1.0: 6 ports detected
>[    1.012321] ehci-pci 0000:00:1d.7: setting latency timer to 64
>[    1.012326] ehci-pci 0000:00:1d.7: EHCI Host Controller
>[    1.012471] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
>[    1.016405] ehci-pci 0000:00:1d.7: debug port 1
>[    1.016416] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
>[    1.016442] ehci-pci 0000:00:1d.7: irq 20, io mem 0x98904800
>[    1.022018] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    1.022070] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.022074] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.022076] usb usb2: Product: EHCI Host Controller
>[    1.022079] usb usb2: Manufacturer: Linux 3.8.0-rc3_drm-fixes_4ddf4b_20130114+ ehci_hcd
>[    1.022081] usb usb2: SerialNumber: 0000:00:1d.7
>[    1.022425] hub 2-0:1.0: USB hub found
>[    1.022435] hub 2-0:1.0: 6 ports detected
>[    1.023860] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.024041] Initializing USB Mass Storage driver...
>[    1.024129] usbcore: registered new interface driver usb-storage
>[    1.024131] USB Mass Storage support registered.
>[    1.024314] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    1.025977] i8042: Detected active multiplexing controller, rev 1.1
>[    1.026723] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.026768] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    1.026952] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    1.026961] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    1.026966] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    1.027381] mousedev: PS/2 mouse device common for all mice
>[    1.027765] rtc_cmos 00:07: RTC can wake from S4
>[    1.028110] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>[    1.028151] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>[    1.028285] cpuidle: using governor ladder
>[    1.028551] cpuidle: using governor menu
>[    1.028553] EFI Variables Facility v0.08 2004-May-17
>[    1.030309] usbcore: registered new interface driver usbhid
>[    1.030311] usbhid: USB HID core driver
>[    1.030544] TCP: cubic registered
>[    1.030546] Initializing XFRM netlink socket
>[    1.030566] NET: Registered protocol family 17
>[    1.030633] Key type dns_resolver registered
>[    1.031566] PM: Hibernation image not present or could not be loaded.
>[    1.031594] registered taskstats version 1
>[    1.032190]   Magic number: 13:83:736
>[    1.049477] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    1.302206] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    1.303309] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[    1.303782] ata1.00: ATA-9: INTEL SSDSC2CW240A3, 400i, max UDMA/133
>[    1.303787] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.304296] ata1.00: failed to get Identify Device Data, Emask 0x1
>[    1.313237] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[    1.314107] ata1.00: failed to get Identify Device Data, Emask 0x1
>[    1.314111] ata1.00: configured for UDMA/133
>[    1.314577] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2CW24 400i PQ: 0 ANSI: 5
>[    1.620202] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.633295] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[    1.633299] ata2.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100
>[    1.647219] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
>[    1.647225] ata2.00: configured for UDMA/100
>[    1.648644] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-7561S  AH03 PQ: 0 ANSI: 5
>[    1.888206] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 504169
>[    1.931888] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
>[    1.954203] ata6: SATA link down (SStatus 0 SControl 300)
>[    1.955244] Freeing unused kernel memory: 588k freed
>[    1.955413] Write protecting the kernel read-only data: 10240k
>[    1.958895] Freeing unused kernel memory: 1276k freed
>[    1.963797] Freeing unused kernel memory: 1832k freed
>[    2.019291] dracut: dracut-018-35.git20120510.fc17
>[    2.045659] dracut: rd.luks=0: removing cryptoluks activation
>[    2.053753] device-mapper: uevent: version 1.0.3
>[    2.054048] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
>[    2.061745] udevd[936]: starting version 182
>[    2.104875] [drm] Initialized drm 1.1.0 20060810
>[    2.107769] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
>[    2.109325] ACPI: Sleep Button [SLPB]
>[    2.111092] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
>[    2.112614] ACPI: Lid Switch [LID]
>[    2.115081] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>[    2.117233] ACPI: Power Button [PWRF]
>[    2.124955] [drm:i915_dump_device_info], i915 device info: gen=4, pciid=0x2a42 flags=is_mobile,need_gfx_hws,is_g4x,has_fbc,has_pipe_cxsr,has_hotplug,supports_tv,has_bsd_ring,
>[    2.124977] checking generic (80000000 300000) vs hw (80000000 10000000)
>[    2.124980] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
>[    2.125092] Console: switching to colour dummy device 80x25
>[    2.126575] i915 0000:00:02.0: setting latency timer to 64
>[    2.160659] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7b94b018
>[    2.160721] [drm:intel_opregion_setup], Public ACPI methods supported
>[    2.160724] [drm:intel_opregion_setup], SWSCI supported
>[    2.160726] [drm:intel_opregion_setup], ASLE supported
>[    2.160816] i915 0000:00:02.0: irq 46 for MSI/MSI-X
>[    2.160834] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    2.160836] [drm] Driver supports precise vblank timestamp query.
>[    2.160839] [drm:init_vbt_defaults], Set default to SSC at 100MHz
>[    2.160843] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT CANTIGA        d
>[    2.160846] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 100 display_clock_mode 0
>[    2.160849] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[    2.160854] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[    2.160857] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x800" 0 69300 1280 1296 1344 1415 800 801 804 816 0x8 0xa
>[    2.160861] [drm:parse_lfp_panel_data], VBT initial LVDS value 42300300
>[    2.160864] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[    2.160867] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    2.160871] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[    2.160901] [drm:intel_dsm_pci_probe], no _DSM method for intel device
>[    2.160915] [drm:i915_setup_compression], FBC base 0x7c000000, ll base 0x00000000, size 32M
>[    2.161066] [drm:intel_modeset_init], 2 display pipes available.
>[    2.161074] [drm:intel_modeset_init], plane 0 init failed: -19
>[    2.161081] [drm:intel_modeset_init], plane 1 init failed: -19
>[    2.161084] [drm:intel_pch_pll_init], No PCH PLLs on this hardware, skipping initialisation
>[    2.161092] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    2.199194] [drm:intel_lvds_init], using preferred mode from EDID: 
>[    2.199199] [drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 0 69300 1280 1296 1344 1415 800 801 804 816 0x48 0xa
>[    2.199554] [drm:intel_panel_get_backlight], get backlight PWM = 3157410
>[    2.199794] [drm:intel_panel_get_backlight], get backlight PWM = 3157410
>[    2.200050] [drm:intel_setup_outputs], probing SDVOB
>[    2.200054] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    2.200414] [drm:intel_sdvo_read_byte], i2c transfer returned -6
>[    2.200417] [drm:intel_sdvo_init], No SDVO device found on SDVOB
>[    2.200745] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    2.200749] [drm:intel_setup_outputs], probing HDMI on SDVOB
>[    2.200977] [drm:intel_setup_outputs], probing DP_B
>[    2.201188] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
>[    2.203733] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[    2.203736] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[    2.206247] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[    2.206249] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[    2.206369] [drm:intel_setup_outputs], probing SDVOC
>[    2.206372] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
>[    2.206757] [drm:intel_sdvo_read_byte], i2c transfer returned -6
>[    2.206760] [drm:intel_sdvo_init], No SDVO device found on SDVOC
>[    2.206890] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0
>[    2.206894] [drm:intel_setup_outputs], probing DP_D
>[    2.207136] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
>[    2.209647] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[    2.209650] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[    2.212161] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[    2.212164] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[    2.214666] [drm:init_status_page], render ring hws offset: 0x00001000
>[    2.214905] [drm:init_status_page], bsd ring hws offset: 0x00024000
>[    2.215092] [drm:intel_modeset_setup_hw_state], [CRTC:3] hw state readout: disabled
>[    2.215096] [drm:intel_modeset_setup_hw_state], [CRTC:4] hw state readout: enabled
>[    2.215099] [drm:intel_modeset_setup_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe=1
>[    2.215102] [drm:intel_modeset_setup_hw_state], [ENCODER:12:DAC-12] hw state readout: disabled, pipe=0
>[    2.215105] [drm:intel_modeset_setup_hw_state], [ENCODER:13:TMDS-13] hw state readout: disabled, pipe=0
>[    2.215108] [drm:intel_modeset_setup_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe=0
>[    2.215111] [drm:intel_modeset_setup_hw_state], [ENCODER:19:TMDS-19] hw state readout: disabled, pipe=0
>[    2.215114] [drm:intel_modeset_setup_hw_state], [ENCODER:22:TV-22] hw state readout: disabled, pipe=0
>[    2.215117] [drm:intel_modeset_setup_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled
>[    2.215120] [drm:intel_modeset_setup_hw_state], [CONNECTOR:11:VGA-1] hw state readout: disabled
>[    2.215123] [drm:intel_modeset_setup_hw_state], [CONNECTOR:14:HDMI-A-1] hw state readout: disabled
>[    2.215126] [drm:intel_modeset_setup_hw_state], [CONNECTOR:18:DP-1] hw state readout: disabled
>[    2.215128] [drm:intel_modeset_setup_hw_state], [CONNECTOR:20:DP-2] hw state readout: disabled
>[    2.215131] [drm:intel_modeset_setup_hw_state], [CONNECTOR:21:SVIDEO-1] hw state readout: disabled
>[    2.215136] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[    2.215140] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6]
>[    2.215143] [drm:intel_modeset_check_state], [ENCODER:12:DAC-12]
>[    2.215145] [drm:intel_modeset_check_state], [ENCODER:13:TMDS-13]
>[    2.215148] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17]
>[    2.215151] [drm:intel_modeset_check_state], [ENCODER:19:TMDS-19]
>[    2.215153] [drm:intel_modeset_check_state], [ENCODER:22:TV-22]
>[    2.215156] [drm:intel_modeset_check_state], [CRTC:3]
>[    2.215158] [drm:intel_modeset_check_state], [CRTC:4]
>[    2.215225] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[    2.215235] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[    2.215238] [drm:drm_mode_debug_printmodeline], Modeline 36:"1280x800" 60 69300 1280 1296 1344 1415 800 801 804 816 0x48 0xa
>[    2.215242] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[    2.223185] [drm:intel_crt_detect], CRT not detected via hotplug
>[    2.225185] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    2.225191] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    2.225195] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    2.225198] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    2.225459] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    2.225462] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    2.225464] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    2.225467] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[    2.225469] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1]
>[    2.225472] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected
>[    2.225475] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
>[    2.225478] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[    2.225481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
>[    2.225483] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
>[    2.227993] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[    2.231693] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[    2.235691] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[    2.237189] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[    2.237194] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
>[    2.237198] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:SVIDEO-1]
>[    2.237203] [drm:intel_get_load_detect_pipe], [CONNECTOR:21:SVIDEO-1], [ENCODER:22:TV-22]
>[    2.237208] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
>[    2.237276] [drm:intel_set_mode], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    2.237283] [drm:intel_modeset_adjusted_mode], [CRTC:3]
>[    2.237759] [drm:i9xx_crtc_mode_set], Mode for pipe A:
>[    2.237761] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
>[    2.237765] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[    2.263170] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5120
>[    2.263176] [drm:intel_update_fbc], no output, disabling
>[    2.263180] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
>[    2.263185] [drm:intel_crtc_mode_set], [ENCODER:22:TV-22] set [MODE:0:NTSC 480i]
>[    2.273199] [drm:g4x_check_srwm], SR watermark: display plane 82, cursor 6
>[    2.273204] [drm:g4x_check_srwm], display watermark is too large(82/63), disabling
>[    2.273208] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=36, cursor=6, B: plane=2, cursor=2, SR: plane=0, cursor=0
>[    2.291212] [drm:intel_update_fbc], fbc set to per-chip default
>[    2.291216] [drm:intel_update_fbc], fbc disabled per module param
>[    2.291228] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[    2.291234] [drm:intel_connector_check_state], [CONNECTOR:21:SVIDEO-1]
>[    2.291239] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6]
>[    2.291243] [drm:intel_modeset_check_state], [ENCODER:12:DAC-12]
>[    2.291248] [drm:intel_modeset_check_state], [ENCODER:13:TMDS-13]
>[    2.291252] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17]
>[    2.291256] [drm:intel_modeset_check_state], [ENCODER:19:TMDS-19]
>[    2.291260] [drm:intel_modeset_check_state], [ENCODER:22:TV-22]
>[    2.291264] [drm:intel_modeset_check_state], [CRTC:3]
>[    2.291268] [drm:intel_modeset_check_state], [CRTC:4]
>[    2.323187] [drm:intel_tv_detect_type], TV detected: c00d7, 700000aa
>[    2.323191] [drm:intel_tv_detect_type], Unrecognised TV connection
>[    2.341184] [drm:intel_release_load_detect_pipe], [CONNECTOR:21:SVIDEO-1], [ENCODER:22:TV-22]
>[    2.341190] [drm:intel_set_mode], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[    2.373186] [drm:intel_update_fbc], no output, disabling
>[    2.373191] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
>[    2.373201] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[    2.373206] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6]
>[    2.373211] [drm:intel_modeset_check_state], [ENCODER:12:DAC-12]
>[    2.373215] [drm:intel_modeset_check_state], [ENCODER:13:TMDS-13]
>[    2.373219] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17]
>[    2.373223] [drm:intel_modeset_check_state], [ENCODER:19:TMDS-19]
>[    2.373228] [drm:intel_modeset_check_state], [ENCODER:22:TV-22]
>[    2.373231] [drm:intel_modeset_check_state], [CRTC:3]
>[    2.373235] [drm:intel_modeset_check_state], [CRTC:4]
>[    2.373405] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:SVIDEO-1] disconnected
>[    2.373408] [drm:drm_setup_crtcs], 
>[    2.373411] [drm:drm_enable_connectors], connector 5 enabled? yes
>[    2.373414] [drm:drm_enable_connectors], connector 11 enabled? no
>[    2.373416] [drm:drm_enable_connectors], connector 14 enabled? no
>[    2.373418] [drm:drm_enable_connectors], connector 18 enabled? no
>[    2.373420] [drm:drm_enable_connectors], connector 20 enabled? no
>[    2.373423] [drm:drm_enable_connectors], connector 21 enabled? no
>[    2.373425] [drm:drm_target_preferred], looking for cmdline mode on connector 5
>[    2.373427] [drm:drm_target_preferred], looking for preferred mode on connector 5
>[    2.373430] [drm:drm_target_preferred], found mode 1280x800
>[    2.373432] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[    2.373435] [drm:drm_setup_crtcs], desired mode 1280x800 set on crtc 3
>[    2.378230] [drm:intelfb_create], allocated 1280x800 fb: 0x00046000, bo ffff880036f24e00
>[    2.378594] fbcon: inteldrmfb (fb0) is primary device
>[    2.379157] [drm:intel_crtc_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[    2.379160] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
>[    2.379162] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[    2.379166] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
>[    2.379169] [drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 69300 1280 1296 1344 1415 800 801 804 816 0x48 0xa
>[    2.379172] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[    2.379174] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[    2.379175] [drm:intel_crtc_set_config], attempting to set mode from userspace
>[    2.379178] [drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 69300 1280 1296 1344 1415 800 801 804 816 0x48 0xa
>[    2.379181] [drm:intel_set_mode], set mode pipe masks: modeset: 1, prepare: 1, disable: 2
>[    2.379183] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[    2.379186] [drm:intel_panel_get_max_backlight], max backlight PWM = 3157410
>[    2.379251] [drm:intel_opregion_asle_intr], non asle set request??
>[    2.739190] [drm:intel_update_fbc], no output, disabling
>[    2.739196] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
>[    2.739208] [drm:intel_modeset_adjusted_mode], [CRTC:3]
>[    2.739215] [drm:i9xx_get_refclk], using SSC reference clock of 100 MHz
>[    2.739552] [drm:i9xx_crtc_mode_set], Mode for pipe A:
>[    2.739555] [drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 69300 1280 1296 1344 1415 800 801 804 816 0x48 0xa
>[    2.739556] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[    2.757208] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5120
>[    2.757212] [drm:intel_update_fbc], no output, disabling
>[    2.757217] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
>[    2.757223] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:8:1280x800]
>[    2.757227] [drm:g4x_check_srwm], SR watermark: display plane 54, cursor 6
>[    2.757231] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=24, cursor=6, B: plane=2, cursor=2, SR: plane=54, cursor=6
>[    2.773205] [drm:intel_update_fbc], fbc set to per-chip default
>[    2.773208] [drm:intel_update_fbc], fbc disabled per module param
>[    2.773212] [drm:intel_enable_lvds], applying panel-fitter: 0, 0
>[    3.365192] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3157410
>[    3.365196] [drm:intel_panel_get_max_backlight], max backlight PWM = 3157410
>[    3.365216] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[    3.365223] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6]
>[    3.365226] [drm:intel_opregion_asle_intr], 
>[    3.365227] non asle set request??
>[    3.365228] [drm:intel_modeset_check_state], [ENCODER:12:DAC-12]
>[    3.365232] [drm:intel_modeset_check_state], [ENCODER:13:TMDS-13]
>[    3.365235] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17]
>[    3.365238] [drm:intel_modeset_check_state], [ENCODER:19:TMDS-19]
>[    3.365242] [drm:intel_modeset_check_state], [ENCODER:22:TV-22]
>[    3.365244] [drm:intel_modeset_check_state], [CRTC:3]
>[    3.365247] [drm:intel_modeset_check_state], [CRTC:4]
>[    3.365253] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[    3.365258] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[    3.365267] Console: switching to colour frame buffer device 160x50
>[    3.365278] [drm:intel_crtc_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[    3.365283] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[    3.368467] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    3.368470] i915 0000:00:02.0: registered panic notifier
>[    3.373849] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000005) is beyond end of object (20121018/exoparg2-418)
>[    3.373871] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DOD] (Node ffff88007af362a8), AE_AML_PACKAGE_LIMIT (20121018/psparse-537)
>[    3.373885] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20121018/video-1163)
>[    3.379311] [drm:asle_set_backlight], bclp = 0x800000ff
>[    3.379315] [drm:intel_panel_get_max_backlight], max backlight PWM = 3157410
>[    3.379317] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3157410
>[    3.379320] [drm:intel_panel_get_max_backlight], max backlight PWM = 3157410
>[    3.379336] [drm:intel_opregion_asle_intr], non asle set request??
>[    3.379823] [drm:asle_set_backlight], bclp = 0x800000ff
>[    3.379825] [drm:intel_panel_get_max_backlight], max backlight PWM = 3157410
>[    3.379828] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3157410
>[    3.379830] [drm:intel_panel_get_max_backlight], max backlight PWM = 3157410
>[    3.379835] [drm:intel_opregion_asle_intr], non asle set request??
>[    3.380299] acpi device:03: registered as cooling_device7
>[    3.380620] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    3.380813] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
>[    3.381285] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    3.391862] dracut: Starting plymouth daemon
>[    3.417288] [drm:i915_driver_open], 
>[    3.417357] [drm:intel_crtc_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[    3.417364] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[    3.417368] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[    3.417371] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[    3.417388] [drm:i915_driver_open], 
>[    3.417404] [drm:intel_crtc_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[    3.417407] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[    3.417410] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[    3.417413] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[    3.417429] [drm:i915_driver_open], 
>[    3.417552] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[6] ENCODERS[6]
>[    3.417566] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[6] ENCODERS[6]
>[    3.417574] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[    3.417580] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[    3.417596] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[    3.417599] [drm:drm_mode_debug_printmodeline], Modeline 36:"1280x800" 60 69300 1280 1296 1344 1415 800 801 804 816 0x48 0xa
>[    3.417604] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
>[    3.421719] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[    3.421725] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[    3.429180] [drm:intel_crt_detect], CRT not detected via hotplug
>[    3.431192] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    3.431198] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    3.431202] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.431205] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.431466] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    3.431468] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.431470] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.431473] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[    3.431478] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
>[    3.431481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[    3.439186] [drm:intel_crt_detect], CRT not detected via hotplug
>[    3.441181] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    3.441186] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    3.441190] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    3.441194] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    3.441454] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    3.441456] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    3.441459] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    3.441461] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[    3.441468] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[    3.441471] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1]
>[    3.441474] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected
>[    3.441478] [drm:drm_mode_getconnector], [CONNECTOR:14:?]
>[    3.441481] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1]
>[    3.441483] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected
>[    3.441489] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[    3.441492] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
>[    3.441496] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[    3.441498] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
>[    3.441501] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[    3.441504] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
>[    3.441507] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[    3.441509] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
>[    3.441515] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[    3.441518] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
>[    3.444030] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[    3.448695] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[    3.452689] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[    3.454187] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[    3.454192] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
>[    3.454199] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[    3.454204] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
>[    3.456716] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[    3.460688] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[    3.464693] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[    3.466184] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[    3.466189] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
>[    3.466200] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[    3.466205] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:SVIDEO-1]
>[    3.466211] [drm:intel_get_load_detect_pipe], [CONNECTOR:21:SVIDEO-1], [ENCODER:22:TV-22]
>[    3.466215] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
>[    3.466287] [drm:intel_set_mode], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[    3.466295] [drm:intel_modeset_adjusted_mode], [CRTC:4]
>[    3.466716] [drm:i9xx_crtc_mode_set], Mode for pipe B:
>[    3.466719] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
>[    3.466722] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[    3.492470] [drm:i9xx_update_plane], Writing base 0042E000 00000000 0 0 5120
>[    3.492478] [drm:intel_update_fbc], fbc set to per-chip default
>[    3.492480] [drm:intel_update_fbc], fbc disabled per module param
>[    3.492484] [drm:g4x_check_srwm], SR watermark: display plane 54, cursor 6
>[    3.492486] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=24, cursor=6, B: plane=2, cursor=2, SR: plane=54, cursor=6
>[    3.492492] [drm:intel_crtc_mode_set], [ENCODER:22:TV-22] set [MODE:0:NTSC 480i]
>[    3.502204] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=24, cursor=6, B: plane=36, cursor=6, SR: plane=0, cursor=0
>[    3.520204] [drm:intel_update_fbc], more than one pipe active, disabling compression
>[    3.520216] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[    3.520223] [drm:intel_connector_check_state], [CONNECTOR:21:SVIDEO-1]
>[    3.520227] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6]
>[    3.520231] [drm:intel_modeset_check_state], [ENCODER:12:DAC-12]
>[    3.520236] [drm:intel_modeset_check_state], [ENCODER:13:TMDS-13]
>[    3.520240] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17]
>[    3.520244] [drm:intel_modeset_check_state], [ENCODER:19:TMDS-19]
>[    3.520248] [drm:intel_modeset_check_state], [ENCODER:22:TV-22]
>[    3.520252] [drm:intel_modeset_check_state], [CRTC:3]
>[    3.520256] [drm:intel_modeset_check_state], [CRTC:4]
>[    3.552179] [drm:intel_tv_detect_type], TV detected: 400c00d7, 700000aa
>[    3.552184] [drm:intel_tv_detect_type], Unrecognised TV connection
>[    3.570186] [drm:intel_release_load_detect_pipe], [CONNECTOR:21:SVIDEO-1], [ENCODER:22:TV-22]
>[    3.570191] [drm:intel_set_mode], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>[    3.602183] [drm:intel_update_fbc], fbc set to per-chip default
>[    3.602188] [drm:intel_update_fbc], fbc disabled per module param
>[    3.602193] [drm:g4x_check_srwm], SR watermark: display plane 54, cursor 6
>[    3.602197] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=24, cursor=6, B: plane=2, cursor=2, SR: plane=54, cursor=6
>[    3.602207] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[    3.602213] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6]
>[    3.602218] [drm:intel_modeset_check_state], [ENCODER:12:DAC-12]
>[    3.602222] [drm:intel_modeset_check_state], [ENCODER:13:TMDS-13]
>[    3.602226] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17]
>[    3.602230] [drm:intel_modeset_check_state], [ENCODER:19:TMDS-19]
>[    3.602234] [drm:intel_modeset_check_state], [ENCODER:22:TV-22]
>[    3.602238] [drm:intel_modeset_check_state], [CRTC:3]
>[    3.602242] [drm:intel_modeset_check_state], [CRTC:4]
>[    3.602372] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:SVIDEO-1] disconnected
>[    3.603294] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[    3.603298] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:SVIDEO-1]
>[    3.603301] [drm:intel_get_load_detect_pipe], [CONNECTOR:21:SVIDEO-1], [ENCODER:22:TV-22]
>[    3.603304] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
>[    3.603320] [drm:intel_set_mode], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[    3.603325] [drm:intel_modeset_adjusted_mode], [CRTC:4]
>[    3.603710] [drm:i9xx_crtc_mode_set], Mode for pipe B:
>[    3.603712] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
>[    3.603716] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[    3.628625] [drm:i9xx_update_plane], Writing base 0042E000 00000000 0 0 5120
>[    3.628632] [drm:intel_update_fbc], fbc set to per-chip default
>[    3.628634] [drm:intel_update_fbc], fbc disabled per module param
>[    3.628637] [drm:g4x_check_srwm], SR watermark: display plane 54, cursor 6
>[    3.628640] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=24, cursor=6, B: plane=2, cursor=2, SR: plane=54, cursor=6
>[    3.628645] [drm:intel_crtc_mode_set], [ENCODER:22:TV-22] set [MODE:0:NTSC 480i]
>[    3.640199] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=24, cursor=6, B: plane=36, cursor=6, SR: plane=0, cursor=0
>[    3.658213] [drm:intel_update_fbc], more than one pipe active, disabling compression
>[    3.658225] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[    3.658231] [drm:intel_connector_check_state], [CONNECTOR:21:SVIDEO-1]
>[    3.658235] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6]
>[    3.658240] [drm:intel_modeset_check_state], [ENCODER:12:DAC-12]
>[    3.658244] [drm:intel_modeset_check_state], [ENCODER:13:TMDS-13]
>[    3.658248] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17]
>[    3.658252] [drm:intel_modeset_check_state], [ENCODER:19:TMDS-19]
>[    3.658256] [drm:intel_modeset_check_state], [ENCODER:22:TV-22]
>[    3.658260] [drm:intel_modeset_check_state], [CRTC:3]
>[    3.658264] [drm:intel_modeset_check_state], [CRTC:4]
>[    3.690187] [drm:intel_tv_detect_type], TV detected: 400c00d7, 700000aa
>[    3.690191] [drm:intel_tv_detect_type], Unrecognised TV connection
>[    3.708183] [drm:intel_release_load_detect_pipe], [CONNECTOR:21:SVIDEO-1], [ENCODER:22:TV-22]
>[    3.708188] [drm:intel_set_mode], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>[    3.740181] [drm:intel_update_fbc], fbc set to per-chip default
>[    3.740185] [drm:intel_update_fbc], fbc disabled per module param
>[    3.740189] [drm:g4x_check_srwm], SR watermark: display plane 54, cursor 6
>[    3.740193] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=24, cursor=6, B: plane=2, cursor=2, SR: plane=54, cursor=6
>[    3.740202] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[    3.740208] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6]
>[    3.740212] [drm:intel_modeset_check_state], [ENCODER:12:DAC-12]
>[    3.740216] [drm:intel_modeset_check_state], [ENCODER:13:TMDS-13]
>[    3.740220] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17]
>[    3.740224] [drm:intel_modeset_check_state], [ENCODER:19:TMDS-19]
>[    3.740228] [drm:intel_modeset_check_state], [ENCODER:22:TV-22]
>[    3.740232] [drm:intel_modeset_check_state], [CRTC:3]
>[    3.740236] [drm:intel_modeset_check_state], [CRTC:4]
>[    3.740363] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:SVIDEO-1] disconnected
>[    3.774642] [drm:drm_mode_addfb], [FB:38]
>[    3.774688] [drm:drm_mode_setcrtc], [CRTC:3]
>[    3.774697] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[    3.774699] [drm:intel_crtc_set_config], [CRTC:3] [FB:38] #connectors=1 (x y) (0 0)
>[    3.774705] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[    3.779910] [drm:i9xx_update_plane], Writing base 0042E000 00000000 0 0 5120
>[    3.797182] [drm:intel_update_fbc], fbc set to per-chip default
>[    3.797187] [drm:intel_update_fbc], fbc disabled per module param
>[    3.797210] [drm:drm_mode_setcrtc], [CRTC:3]
>[    3.797221] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
>[    3.797225] [drm:intel_crtc_set_config], [CRTC:3] [FB:38] #connectors=1 (x y) (0 0)
>[    3.797232] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[    3.822293] dracut: rd.dm=0: removing DM RAID activation
>[    3.832853] dracut: rd.md=0: removing MD RAID activation
>[    3.968132] uhci_hcd: USB Universal Host Controller Interface driver
>[    3.968186] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>[    3.968191] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>[    3.969068] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
>[    3.969124] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000070c0
>[    3.969254] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.969258] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.969262] usb usb3: Product: UHCI Host Controller
>[    3.969265] usb usb3: Manufacturer: Linux 3.8.0-rc3_drm-fixes_4ddf4b_20130114+ uhci_hcd
>[    3.969267] usb usb3: SerialNumber: 0000:00:1a.0
>[    3.971050] hub 3-0:1.0: USB hub found
>[    3.971062] hub 3-0:1.0: 2 ports detected
>[    3.971402] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>[    3.971407] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>[    3.971617] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
>[    3.971668] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000070a0
>[    3.971729] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.971732] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.971735] usb usb4: Product: UHCI Host Controller
>[    3.971738] usb usb4: Manufacturer: Linux 3.8.0-rc3_drm-fixes_4ddf4b_20130114+ uhci_hcd
>[    3.971741] usb usb4: SerialNumber: 0000:00:1a.1
>[    3.972982] hub 4-0:1.0: USB hub found
>[    3.972992] hub 4-0:1.0: 2 ports detected
>[    3.973321] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>[    3.973326] uhci_hcd 0000:00:1a.2: UHCI Host Controller
>[    3.974049] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
>[    3.974096] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00007080
>[    3.974152] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.974156] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.974159] usb usb5: Product: UHCI Host Controller
>[    3.974161] usb usb5: Manufacturer: Linux 3.8.0-rc3_drm-fixes_4ddf4b_20130114+ uhci_hcd
>[    3.974164] usb usb5: SerialNumber: 0000:00:1a.2
>[    3.975691] hub 5-0:1.0: USB hub found
>[    3.975702] hub 5-0:1.0: 2 ports detected
>[    3.975987] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    3.975992] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    3.976943] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
>[    3.976974] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007060
>[    3.977060] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.977064] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.977066] usb usb6: Product: UHCI Host Controller
>[    3.977069] usb usb6: Manufacturer: Linux 3.8.0-rc3_drm-fixes_4ddf4b_20130114+ uhci_hcd
>[    3.977072] usb usb6: SerialNumber: 0000:00:1d.0
>[    3.979249] hub 6-0:1.0: USB hub found
>[    3.979258] hub 6-0:1.0: 2 ports detected
>[    3.979846] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    3.979852] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    3.981754] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
>[    3.981805] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00007040
>[    3.981862] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.981866] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.981868] usb usb7: Product: UHCI Host Controller
>[    3.981871] usb usb7: Manufacturer: Linux 3.8.0-rc3_drm-fixes_4ddf4b_20130114+ uhci_hcd
>[    3.981874] usb usb7: SerialNumber: 0000:00:1d.1
>[    3.983525] hub 7-0:1.0: USB hub found
>[    3.983535] hub 7-0:1.0: 2 ports detected
>[    3.984282] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    3.984288] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    3.985968] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
>[    3.985998] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007020
>[    3.986072] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
>[    3.986076] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    3.986078] usb usb8: Product: UHCI Host Controller
>[    3.986081] usb usb8: Manufacturer: Linux 3.8.0-rc3_drm-fixes_4ddf4b_20130114+ uhci_hcd
>[    3.986084] usb usb8: SerialNumber: 0000:00:1d.2
>[    3.988213] hub 8-0:1.0: USB hub found
>[    3.988222] hub 8-0:1.0: 2 ports detected
>[    3.990062] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
>[    3.990332] sd 0:0:0:0: [sda] Write Protect is off
>[    3.990335] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    3.990375] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    3.995058]  sda: sda1 sda2 sda3
>[    3.999751] sd 0:0:0:0: [sda] Attached SCSI disk
>[    4.007170] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    4.007174] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    4.009188] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    4.118543] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    4.146800] dracut: Checking ext4: /dev/disk/by-uuid/f7cc7c9d-b77b-49c2-a2dd-1427d5bd4919
>[    4.146956] dracut: issuing e2fsck -a  /dev/disk/by-uuid/f7cc7c9d-b77b-49c2-a2dd-1427d5bd4919
>[    4.155993] dracut: /dev/disk/by-uuid/f7cc7c9d-b77b-49c2-a2dd-1427d5bd4919: clean, 1708586/14524416 files, 16180272/58082560 blocks
>[    4.156528] dracut: Remounting /dev/disk/by-uuid/f7cc7c9d-b77b-49c2-a2dd-1427d5bd4919 with -o ro
>[    4.171436] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    4.176712] dracut: Mounted root filesystem /dev/sda3
>[    4.214854] dracut: Switching root
>[    4.275129] usb 4-1: new full-speed USB device number 2 using uhci_hcd
>[    4.294777] NET: Registered protocol family 10
>[    4.366798] systemd-readahead-collect[1878]: Failed to create fanotify object: Function not implemented
>[    4.434726] usb 4-1: New USB device found, idVendor=08ff, idProduct=2810
>[    4.434730] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>[    4.434733] usb 4-1: Product: Fingerprint Sensor
>[    4.475701] udevd[1897]: starting version 182
>[    4.543215] EXT4-fs (sda3): re-mounted. Opts: (null)
>[    4.590043] usb 8-1: new low-speed USB device number 2 using uhci_hcd
>[    4.661115] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    4.661786] ACPI: AC Adapter [AC] (on-line)
>[    4.785096] usb 8-1: New USB device found, idVendor=04b3, idProduct=310b
>[    4.785101] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    4.785640] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    4.785662] ACPI: Battery Slot [BAT0] (battery present)
>[    4.802562] wmi: Mapper loaded
>[    4.805598] input: HID 04b3:310b as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input6
>[    4.807593] hid-generic 0003:04B3:310B.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:1d.2-1/input0
>[    4.814456] sky2: driver version 1.30
>[    4.814538] sky2 0000:85:00.0: Yukon-2 Extreme chip revision 2
>[    4.814688] sky2 0000:85:00.0: irq 47 for MSI/MSI-X
>[    4.816242] sky2 0000:85:00.0 eth0: addr 00:12:34:00:00:03
>[    4.831275] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
>[    4.907165] input: PC Speaker as /devices/platform/pcspkr/input/input7
>[    4.938084] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
>[    4.942007] microcode: CPU0 updated to revision 0x60f, date = 2010-09-29
>[    4.949917] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
>[    4.951304] microcode: CPU1 updated to revision 0x60f, date = 2010-09-29
>[    4.959961] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    5.040165] Adding 2097148k swap on /dev/sda2.  Priority:0 extents:1 across:2097148k SS
>[    5.219635] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
>[    5.219644] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    5.219649] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
>[    5.219654] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    5.219656] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
>[    5.219661] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    5.219663] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    5.222470] iTCO_vendor_support: vendor-support=0
>[    5.222898] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[    5.223697] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
>[    5.224396] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    6.268600] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    6.280332] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[    6.300660] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[    6.494470] [drm:intel_crtc_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[    6.494476] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[    6.494487] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5120
>[    6.494503] watchdog (2915): /proc/2915/oom_adj is deprecated, please use /proc/2915/oom_score_adj instead.
>[    6.497081] [drm:intel_update_fbc], fbc set to per-chip default
>[    6.497082] [drm:intel_update_fbc], fbc disabled per module param
>[    6.497086] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[    6.497089] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[    6.497093] [drm:intel_crtc_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[    6.497096] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[    6.497109] [drm:intel_crtc_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[    6.497112] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[    6.503942] [drm:intel_crtc_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[    6.503947] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[    6.503950] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[    6.503953] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[    6.719434] sky2 0000:85:00.0 p5p1: enabling interface
>[    6.719938] IPv6: ADDRCONF(NETDEV_UP): p5p1: link is not ready
>[    6.740968] Bluetooth: Core ver 2.16
>[    6.743203] NET: Registered protocol family 31
>[    6.743206] Bluetooth: HCI device and connection manager initialized
>[    6.743286] Bluetooth: HCI socket layer initialized
>[    6.743291] Bluetooth: L2CAP socket layer initialized
>[    6.743307] Bluetooth: SCO socket layer initialized
>[    6.753087] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[    6.753090] Bluetooth: BNEP filters: protocol multicast
>[    6.753099] Bluetooth: BNEP socket layer initialized
>[    8.385285] sky2 0000:85:00.0 p5p1: Link is up at 100 Mbps, full duplex, flow control rx
>[    8.385289] IPv6: ADDRCONF(NETDEV_CHANGE): p5p1: link becomes ready
>[   13.376348] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[   23.392151] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[   33.408146] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[   41.591955] [drm:i915_driver_open], 
>[   41.591986] [drm:intel_crtc_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[   41.591993] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[   41.591997] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[   41.592019] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[   41.592035] [drm:i915_driver_open], 
>[   41.592055] [drm:i915_driver_open], 
>[   41.592077] [drm:i915_driver_open], 
>[   41.611695] [drm:intel_crtc_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[   41.611699] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[   41.611703] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[   41.611706] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[   43.424152] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[   44.894755] 
>[   44.894755] ======================================================
>[   44.894756] [ INFO: possible circular locking dependency detected ]
>[   44.894758] 3.8.0-rc3_drm-fixes_4ddf4b_20130114+ #15 Not tainted
>[   44.894758] -------------------------------------------------------
>[   44.894759] module_reload/3180 is trying to acquire lock:
>[   44.894766]  (console_lock){+.+.+.}, at: [<ffffffff812f77a9>] unbind_con_driver+0x39/0x195
>[   44.894767] 
>[   44.894767] but task is already holding lock:
>[   44.894771]  (s_active#38){++++.+}, at: [<ffffffff81162b4d>] sysfs_write_file+0xd1/0x121
>[   44.894772] 
>[   44.894772] which lock already depends on the new lock.
>[   44.894772] 
>[   44.894772] 
>[   44.894772] the existing dependency chain (in reverse order) is:
>[   44.894774] 
>[   44.894774] -> #1 (s_active#38){++++.+}:
>[   44.894777]        [<ffffffff8107bc24>] lock_acquire+0x8f/0x104
>[   44.894779]        [<ffffffff811634d3>] sysfs_deactivate+0x90/0xc7
>[   44.894781]        [<ffffffff81163e13>] sysfs_addrm_finish+0x29/0x52
>[   44.894783]        [<ffffffff8116261a>] sysfs_hash_and_remove+0x76/0x88
>[   44.894785]        [<ffffffff811629a5>] sysfs_remove_file+0x2f/0x36
>[   44.894788]        [<ffffffff81311987>] device_remove_file+0x12/0x14
>[   44.894790]        [<ffffffff812f6ebe>] unregister_con_driver+0x56/0xcc
>[   44.894793]        [<ffffffff812ab172>] fbcon_event_notify+0x3a2/0x5ea
>[   44.894796]        [<ffffffff814b72c8>] notifier_call_chain+0x32/0x5c
>[   44.894799]        [<ffffffff81051c1d>] __blocking_notifier_call_chain+0x41/0x5a
>[   44.894801]        [<ffffffff81051c45>] blocking_notifier_call_chain+0xf/0x11
>[   44.894804]        [<ffffffff8129da0a>] fb_notifier_call_chain+0x16/0x18
>[   44.894806]        [<ffffffff8129f387>] do_unregister_framebuffer+0xbe/0xda
>[   44.894807]        [<ffffffff8129f4b6>] do_remove_conflicting_framebuffers+0xd8/0x145
>[   44.894809]        [<ffffffff8129f7d5>] remove_conflicting_framebuffers+0x31/0x46
>[   44.894826]        [<ffffffffa00a8e81>] i915_driver_load+0x4a6/0xcba [i915]
>[   44.894840]        [<ffffffffa0042247>] drm_get_pci_dev+0x172/0x26b [drm]
>[   44.894848]        [<ffffffffa00a5571>] i915_pci_probe+0x60/0x69 [i915]
>[   44.894851]        [<ffffffff8128f59c>] local_pci_probe+0x1b/0x2d
>[   44.894852]        [<ffffffff8128fea9>] pci_device_probe+0xba/0xe0
>[   44.894855]        [<ffffffff81314c69>] driver_probe_device+0x91/0x19e
>[   44.894856]        [<ffffffff81314dd3>] __driver_attach+0x5d/0x80
>[   44.894859]        [<ffffffff813133a0>] bus_for_each_dev+0x52/0x84
>[   44.894860]        [<ffffffff8131483b>] driver_attach+0x19/0x1b
>[   44.894862]        [<ffffffff81314449>] bus_add_driver+0xf9/0x21e
>[   44.894864]        [<ffffffff81315347>] driver_register+0x8e/0x114
>[   44.894866]        [<ffffffff8128ff94>] __pci_register_driver+0x5d/0x62
>[   44.894874]        [<ffffffffa00423c5>] drm_pci_init+0x85/0xea [drm]
>[   44.894878]        [<ffffffffa0124066>] ad1988_independent_hp_put+0x21/0x4e [snd_hda_codec_analog]
>[   44.894881]        [<ffffffff81000232>] do_one_initcall+0x7a/0x130
>[   44.894883]        [<ffffffff81085ddb>] load_module+0x1549/0x1811
>[   44.894885]        [<ffffffff81086145>] sys_init_module+0xa2/0xb1
>[   44.894887]        [<ffffffff814ba7d2>] system_call_fastpath+0x16/0x1b
>[   44.894889] 
>[   44.894889] -> #0 (console_lock){+.+.+.}:
>[   44.894891]        [<ffffffff8107b145>] __lock_acquire+0xfa6/0x1624
>[   44.894892]        [<ffffffff8107bc24>] lock_acquire+0x8f/0x104
>[   44.894895]        [<ffffffff81030480>] console_lock+0x59/0x5b
>[   44.894896]        [<ffffffff812f77a9>] unbind_con_driver+0x39/0x195
>[   44.894898]        [<ffffffff812f81d9>] store_bind+0x1ae/0x1c3
>[   44.894900]        [<ffffffff81311077>] dev_attr_store+0x13/0x1f
>[   44.894902]        [<ffffffff81162b65>] sysfs_write_file+0xe9/0x121
>[   44.894905]        [<ffffffff811052fb>] vfs_write+0x9e/0x147
>[   44.894907]        [<ffffffff811055a1>] sys_write+0x44/0x75
>[   44.894909]        [<ffffffff814ba7d2>] system_call_fastpath+0x16/0x1b
>[   44.894910] 
>[   44.894910] other info that might help us debug this:
>[   44.894910] 
>[   44.894910]  Possible unsafe locking scenario:
>[   44.894910] 
>[   44.894911]        CPU0                    CPU1
>[   44.894911]        ----                    ----
>[   44.894912]   lock(s_active#38);
>[   44.894914]                                lock(console_lock);
>[   44.894915]                                lock(s_active#38);
>[   44.894916]   lock(console_lock);
>[   44.894916] 
>[   44.894916]  *** DEADLOCK ***
>[   44.894916] 
>[   44.894917] 2 locks held by module_reload/3180:
>[   44.894920]  #0:  (&buffer->mutex){+.+.+.}, at: [<ffffffff81162ab3>] sysfs_write_file+0x37/0x121
>[   44.894924]  #1:  (s_active#38){++++.+}, at: [<ffffffff81162b4d>] sysfs_write_file+0xd1/0x121
>[   44.894924] 
>[   44.894924] stack backtrace:
>[   44.894926] Pid: 3180, comm: module_reload Not tainted 3.8.0-rc3_drm-fixes_4ddf4b_20130114+ #15
>[   44.894926] Call Trace:
>[   44.894929]  [<ffffffff814ac272>] print_circular_bug+0x28d/0x29e
>[   44.894931]  [<ffffffff8107b145>] __lock_acquire+0xfa6/0x1624
>[   44.894933]  [<ffffffff8107bc24>] lock_acquire+0x8f/0x104
>[   44.894935]  [<ffffffff812f77a9>] ? unbind_con_driver+0x39/0x195
>[   44.894936]  [<ffffffff8107c48f>] ? trace_hardirqs_on+0xd/0xf
>[   44.894938]  [<ffffffff81030480>] console_lock+0x59/0x5b
>[   44.894940]  [<ffffffff812f77a9>] ? unbind_con_driver+0x39/0x195
>[   44.894941]  [<ffffffff812f77a9>] unbind_con_driver+0x39/0x195
>[   44.894944]  [<ffffffff81275601>] ? simple_strtoull+0x2c/0x49
>[   44.894946]  [<ffffffff812f81d9>] store_bind+0x1ae/0x1c3
>[   44.894947]  [<ffffffff81311077>] dev_attr_store+0x13/0x1f
>[   44.894949]  [<ffffffff81162b65>] sysfs_write_file+0xe9/0x121
>[   44.894951]  [<ffffffff811052fb>] vfs_write+0x9e/0x147
>[   44.894953]  [<ffffffff811055a1>] sys_write+0x44/0x75
>[   44.894955]  [<ffffffff814ba7d2>] system_call_fastpath+0x16/0x1b
>[   44.950495] Console: switching to colour dummy device 80x25
>[   44.952500] [drm:intel_crtc_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[   44.952511] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[   44.952518] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[   44.952523] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[   44.962530] drm_kms_helper: drm: unregistered panic notifier
>[   44.967260] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[   44.971762] [drm:drm_mm_takedown] *ERROR* Memory manager not clean. Delaying takedown
>[   44.972514] [drm] Module unloaded
>[   45.025040] [drm] Initialized drm 1.1.0 20060810
>[   45.033680] [drm:i915_dump_device_info], i915 device info: gen=4, pciid=0x2a42 flags=is_mobile,need_gfx_hws,is_g4x,has_fbc,has_pipe_cxsr,has_hotplug,supports_tv,has_bsd_ring,
>[   45.033702] i915 0000:00:02.0: setting latency timer to 64
>[   45.058218] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7b94b018
>[   45.058251] [drm:intel_opregion_setup], Public ACPI methods supported
>[   45.058257] [drm:intel_opregion_setup], SWSCI supported
>[   45.058261] [drm:intel_opregion_setup], ASLE supported
>[   45.058298] i915 0000:00:02.0: irq 46 for MSI/MSI-X
>[   45.058312] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[   45.058317] [drm] Driver supports precise vblank timestamp query.
>[   45.058322] [drm:init_vbt_defaults], Set default to SSC at 100MHz
>[   45.058328] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT CANTIGA        d
>[   45.058335] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 100 display_clock_mode 0
>[   45.058343] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[   45.058350] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[   45.058356] [drm:drm_mode_debug_printmodeline], Modeline 0:"1280x800" 0 69300 1280 1296 1344 1415 800 801 804 816 0x8 0xa
>[   45.058365] [drm:parse_lfp_panel_data], VBT initial LVDS value 42300300
>[   45.058370] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[   45.058376] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[   45.058385] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[   45.058401] [drm:intel_dsm_pci_probe], no _DSM method for intel device
>[   45.058412] [drm:i915_setup_compression], FBC base 0x7c000000, ll base 0x00000000, size 32M
>[   45.058429] [drm:intel_modeset_init], 2 display pipes available.
>[   45.058436] [drm:intel_modeset_init], plane 0 init failed: -19
>[   45.058443] [drm:intel_modeset_init], plane 1 init failed: -19
>[   45.058449] [drm:intel_pch_pll_init], No PCH PLLs on this hardware, skipping initialisation
>[   45.096143] [drm:intel_lvds_init], using preferred mode from EDID: 
>[   45.096152] [drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 0 69300 1280 1296 1344 1415 800 801 804 816 0x48 0xa
>[   45.096347] [drm:intel_panel_get_backlight], get backlight PWM = 3157410
>[   45.096418] [drm:intel_panel_get_backlight], get backlight PWM = 3157410
>[   45.096538] [drm:intel_setup_outputs], probing SDVOB
>[   45.096545] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
>[   45.096887] [drm:intel_sdvo_read_byte], i2c transfer returned -6
>[   45.096893] [drm:intel_sdvo_init], No SDVO device found on SDVOB
>[   45.096996] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0
>[   45.097024] [drm:intel_setup_outputs], probing HDMI on SDVOB
>[   45.097147] [drm:intel_setup_outputs], probing DP_B
>[   45.097262] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
>[   45.099779] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[   45.099785] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[   45.102298] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[   45.102304] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[   45.102384] [drm:intel_setup_outputs], probing SDVOC
>[   45.102390] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus dpb. force bit now 1
>[   45.102718] [drm:intel_sdvo_read_byte], i2c transfer returned -6
>[   45.102724] [drm:intel_sdvo_init], No SDVO device found on SDVOC
>[   45.102797] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus dpb. force bit now 0
>[   45.102806] [drm:intel_setup_outputs], probing DP_D
>[   45.102931] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
>[   45.105445] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[   45.105451] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[   45.107963] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[   45.107969] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[   45.110235] [drm:init_status_page], render ring hws offset: 0x00001000
>[   45.110409] [drm:init_status_page], bsd ring hws offset: 0x00024000
>[   45.110571] [drm:intel_modeset_setup_hw_state], [CRTC:3] hw state readout: enabled
>[   45.110578] [drm:intel_modeset_setup_hw_state], [CRTC:4] hw state readout: disabled
>[   45.110585] [drm:intel_modeset_setup_hw_state], [ENCODER:6:LVDS-6] hw state readout: enabled, pipe=0
>[   45.110592] [drm:intel_modeset_setup_hw_state], [ENCODER:12:DAC-12] hw state readout: disabled, pipe=0
>[   45.110600] [drm:intel_modeset_setup_hw_state], [ENCODER:13:TMDS-13] hw state readout: disabled, pipe=0
>[   45.110607] [drm:intel_modeset_setup_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe=0
>[   45.110614] [drm:intel_modeset_setup_hw_state], [ENCODER:19:TMDS-19] hw state readout: disabled, pipe=0
>[   45.110622] [drm:intel_modeset_setup_hw_state], [ENCODER:22:TV-22] hw state readout: disabled, pipe=0
>[   45.110629] [drm:intel_modeset_setup_hw_state], [CONNECTOR:5:LVDS-1] hw state readout: enabled
>[   45.110636] [drm:intel_modeset_setup_hw_state], [CONNECTOR:11:VGA-1] hw state readout: disabled
>[   45.110643] [drm:intel_modeset_setup_hw_state], [CONNECTOR:14:HDMI-A-1] hw state readout: disabled
>[   45.110650] [drm:intel_modeset_setup_hw_state], [CONNECTOR:18:DP-1] hw state readout: disabled
>[   45.110657] [drm:intel_modeset_setup_hw_state], [CONNECTOR:20:DP-2] hw state readout: disabled
>[   45.110664] [drm:intel_modeset_setup_hw_state], [CONNECTOR:21:SVIDEO-1] hw state readout: disabled
>[   45.110673] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[   45.110679] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6]
>[   45.110685] [drm:intel_modeset_check_state], [ENCODER:12:DAC-12]
>[   45.110690] [drm:intel_modeset_check_state], [ENCODER:13:TMDS-13]
>[   45.110695] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17]
>[   45.110701] [drm:intel_modeset_check_state], [ENCODER:19:TMDS-19]
>[   45.110706] [drm:intel_modeset_check_state], [ENCODER:22:TV-22]
>[   45.110711] [drm:intel_modeset_check_state], [CRTC:3]
>[   45.110716] [drm:intel_modeset_check_state], [CRTC:4]
>[   45.110751] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
>[   45.110763] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
>[   45.110770] [drm:drm_mode_debug_printmodeline], Modeline 36:"1280x800" 60 69300 1280 1296 1344 1415 800 801 804 816 0x48 0xa
>[   45.110779] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
>[   45.118132] [drm:intel_crt_detect], CRT not detected via hotplug
>[   45.120133] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[   45.120144] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   45.120154] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[   45.120163] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[   45.120432] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[   45.120438] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[   45.120444] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[   45.120450] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
>[   45.120456] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1]
>[   45.120462] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected
>[   45.120468] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1]
>[   45.120474] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[   45.120480] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:DP-1] disconnected
>[   45.120486] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2]
>[   45.122999] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[   45.127643] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[   45.131641] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x51450085
>[   45.133133] [drm:intel_dp_detect], DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>[   45.133145] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-2] disconnected
>[   45.133155] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:SVIDEO-1]
>[   45.133165] [drm:intel_get_load_detect_pipe], [CONNECTOR:21:SVIDEO-1], [ENCODER:22:TV-22]
>[   45.133175] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
>[   45.133192] [drm:intel_set_mode], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[   45.133204] [drm:intel_modeset_adjusted_mode], [CRTC:4]
>[   45.133642] [drm:i9xx_crtc_mode_set], Mode for pipe B:
>[   45.133646] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
>[   45.133654] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[   45.158429] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5120
>[   45.158440] [drm:intel_update_fbc], no output, disabling
>[   45.158446] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
>[   45.158455] [drm:intel_crtc_mode_set], [ENCODER:22:TV-22] set [MODE:0:NTSC 480i]
>[   45.170152] [drm:g4x_check_srwm], SR watermark: display plane 82, cursor 6
>[   45.170163] [drm:g4x_check_srwm], display watermark is too large(82/63), disabling
>[   45.170172] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=36, cursor=6, SR: plane=0, cursor=0
>[   45.188158] [drm:intel_update_fbc], fbc set to per-chip default
>[   45.188167] [drm:intel_update_fbc], fbc disabled per module param
>[   45.188181] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[   45.188192] [drm:intel_connector_check_state], [CONNECTOR:21:SVIDEO-1]
>[   45.188200] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6]
>[   45.188208] [drm:intel_modeset_check_state], [ENCODER:12:DAC-12]
>[   45.188217] [drm:intel_modeset_check_state], [ENCODER:13:TMDS-13]
>[   45.188225] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17]
>[   45.188233] [drm:intel_modeset_check_state], [ENCODER:19:TMDS-19]
>[   45.188241] [drm:intel_modeset_check_state], [ENCODER:22:TV-22]
>[   45.188249] [drm:intel_modeset_check_state], [CRTC:3]
>[   45.188256] [drm:intel_modeset_check_state], [CRTC:4]
>[   45.220136] [drm:intel_tv_detect_type], TV detected: 400c00d7, 700000aa
>[   45.220146] [drm:intel_tv_detect_type], Unrecognised TV connection
>[   45.238136] [drm:intel_release_load_detect_pipe], [CONNECTOR:21:SVIDEO-1], [ENCODER:22:TV-22]
>[   45.238148] [drm:intel_set_mode], set mode pipe masks: modeset: 0, prepare: 0, disable: 2
>[   45.270133] [drm:intel_update_fbc], no output, disabling
>[   45.270144] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
>[   45.270161] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[   45.270171] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6]
>[   45.270179] [drm:intel_modeset_check_state], [ENCODER:12:DAC-12]
>[   45.270188] [drm:intel_modeset_check_state], [ENCODER:13:TMDS-13]
>[   45.270196] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17]
>[   45.270204] [drm:intel_modeset_check_state], [ENCODER:19:TMDS-19]
>[   45.270213] [drm:intel_modeset_check_state], [ENCODER:22:TV-22]
>[   45.270220] [drm:intel_modeset_check_state], [CRTC:3]
>[   45.270227] [drm:intel_modeset_check_state], [CRTC:4]
>[   45.270341] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:SVIDEO-1] disconnected
>[   45.270349] [drm:drm_setup_crtcs], 
>[   45.270353] [drm:drm_enable_connectors], connector 5 enabled? yes
>[   45.270358] [drm:drm_enable_connectors], connector 11 enabled? no
>[   45.270362] [drm:drm_enable_connectors], connector 14 enabled? no
>[   45.270367] [drm:drm_enable_connectors], connector 18 enabled? no
>[   45.270372] [drm:drm_enable_connectors], connector 20 enabled? no
>[   45.270376] [drm:drm_enable_connectors], connector 21 enabled? no
>[   45.270381] [drm:drm_target_preferred], looking for cmdline mode on connector 5
>[   45.270387] [drm:drm_target_preferred], looking for preferred mode on connector 5
>[   45.270392] [drm:drm_target_preferred], found mode 1280x800
>[   45.270397] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[   45.270402] [drm:drm_setup_crtcs], desired mode 1280x800 set on crtc 3
>[   45.274624] [drm:intelfb_create], allocated 1280x800 fb: 0x00046000, bo ffff880036f74600
>[   45.274830] fbcon: inteldrmfb (fb0) is primary device
>[   45.274981] [drm:intel_crtc_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[   45.274983] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
>[   45.274984] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[   45.274987] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[   45.274990] [drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 69300 1280 1296 1344 1415 800 801 804 816 0x48 0xa
>[   45.274992] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[   45.274993] [drm:intel_crtc_set_config], attempting to set mode from userspace
>[   45.274996] [drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 69300 1280 1296 1344 1415 800 801 804 816 0x48 0xa
>[   45.274998] [drm:intel_set_mode], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[   45.275018] [drm:intel_modeset_adjusted_mode], [CRTC:3]
>[   45.275022] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[   45.275027] [drm:intel_panel_get_max_backlight], max backlight PWM = 3157410
>[   45.275034] [drm:i965_irq_handler], pipe A underrun
>[   45.275038] [drm:intel_opregion_asle_intr], non asle set request??
>[   45.623142] [drm:intel_update_fbc], no output, disabling
>[   45.623146] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
>[   45.623152] [drm:i9xx_get_refclk], using SSC reference clock of 100 MHz
>[   45.623489] [drm:i9xx_crtc_mode_set], Mode for pipe A:
>[   45.623492] [drm:drm_mode_debug_printmodeline], Modeline 8:"1280x800" 60 69300 1280 1296 1344 1415 800 801 804 816 0x48 0xa
>[   45.623493] [drm:i9xx_crtc_mode_set], disabling CxSR downclocking
>[   45.641143] [drm:i9xx_update_plane], Writing base 00046000 00000000 0 0 5120
>[   45.641145] [drm:intel_update_fbc], no output, disabling
>[   45.641149] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
>[   45.641154] [drm:intel_crtc_mode_set], [ENCODER:6:LVDS-6] set [MODE:8:1280x800]
>[   45.641157] [drm:g4x_check_srwm], SR watermark: display plane 54, cursor 6
>[   45.641160] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=24, cursor=6, B: plane=2, cursor=2, SR: plane=54, cursor=6
>[   45.657166] [drm:intel_update_fbc], fbc set to per-chip default
>[   45.657167] [drm:intel_update_fbc], fbc disabled per module param
>[   46.207136] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3157410
>[   46.207139] [drm:intel_panel_get_max_backlight], max backlight PWM = 3157410
>[   46.207145] [drm:intel_opregion_asle_intr], non asle set request??
>[   46.207153] [drm:intel_connector_check_state], [CONNECTOR:5:LVDS-1]
>[   46.207158] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6]
>[   46.207161] [drm:intel_modeset_check_state], [ENCODER:12:DAC-12]
>[   46.207163] [drm:intel_modeset_check_state], [ENCODER:13:TMDS-13]
>[   46.207166] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17]
>[   46.207168] [drm:intel_modeset_check_state], [ENCODER:19:TMDS-19]
>[   46.207171] [drm:intel_modeset_check_state], [ENCODER:22:TV-22]
>[   46.207173] [drm:intel_modeset_check_state], [CRTC:3]
>[   46.207175] [drm:intel_modeset_check_state], [CRTC:4]
>[   46.207178] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[   46.207182] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[   46.207264] Console: switching to colour frame buffer device 160x50
>[   46.207274] [drm:intel_crtc_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[   46.207277] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[   46.241633] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[   46.243149] i915 0000:00:02.0: registered panic notifier
>[   46.244881] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000005) is beyond end of object (20121018/exoparg2-418)
>[   46.246441] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DOD] (Node ffff88007af362a8), AE_AML_PACKAGE_LIMIT (20121018/psparse-537)
>[   46.248036] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20121018/video-1163)
>[   46.250091] [drm:asle_set_backlight], bclp = 0x800000ff
>[   46.250552] acpi device:03: registered as cooling_device7
>[   46.250745] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[   46.250849] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
>[   46.251057] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[   46.252664] [drm:intel_panel_get_max_backlight], max backlight PWM = 3157410
>[   46.252664] [drm:intel_panel_actually_set_backlight], set backlight PWM = 3157410
>[   46.252664] [drm:intel_panel_get_max_backlight], max backlight PWM = 3157410
>[   46.252664] [drm:intel_opregion_asle_intr], non asle set request??
>[   46.267611] [drm:i915_driver_open], 
>[   46.269184] [drm:intel_crtc_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[   46.270756] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[   46.272314] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[   46.273873] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[   46.275473] [drm:i915_driver_open], 
>[   46.873820] [drm:intel_crtc_set_config], [CRTC:3] [FB:37] #connectors=1 (x y) (0 0)
>[   46.875426] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[   46.876991] [drm:intel_crtc_set_config], [CRTC:4] [NOFB]
>[   46.878570] [drm:intel_modeset_stage_output_state], [CONNECTOR:5:LVDS-1] to [CRTC:3]
>[   56.256144] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[   66.272145] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[   76.288140] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[   86.304144] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[   96.320144] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  106.336148] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  116.352150] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  126.368157] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  136.384153] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  146.400158] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  156.416158] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  166.432162] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  176.448163] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  186.464168] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  196.480163] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  206.496168] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  216.512168] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  226.528177] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  236.544173] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  246.560184] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  256.576182] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  266.592181] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  276.608181] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  286.624180] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  296.640181] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  306.656182] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  316.672183] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  326.688179] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  336.704217] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  346.720180] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  356.736187] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  366.752186] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  376.768182] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  386.784181] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  396.800182] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  406.816187] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  416.832187] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  426.848182] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  436.864183] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  446.880185] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  456.896179] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  466.912185] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  476.928188] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  486.944187] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  496.960186] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  506.976186] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  516.992187] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  527.008183] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  537.024187] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  547.040187] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  557.056183] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  567.072183] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  577.088181] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  587.104186] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  597.120182] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  607.136188] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  617.152182] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  627.168184] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  637.184179] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  646.112194] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  646.112199] [drm:intel_panel_get_max_backlight], max backlight PWM = 3157410
>[  646.112208] [drm:intel_opregion_asle_intr], non asle set request??
>[  646.474183] [drm:intel_update_fbc], no output, disabling
>[  646.474188] [drm:g4x_update_wm], Setting FIFO watermarks - A: plane=2, cursor=2, B: plane=2, cursor=2, SR: plane=0, cursor=0
>[  646.474196] [drm:intel_modeset_check_state], [ENCODER:6:LVDS-6]
>[  646.474199] [drm:intel_modeset_check_state], [ENCODER:12:DAC-12]
>[  646.474202] [drm:intel_modeset_check_state], [ENCODER:13:TMDS-13]
>[  646.474204] [drm:intel_modeset_check_state], [ENCODER:17:TMDS-17]
>[  646.474207] [drm:intel_modeset_check_state], [ENCODER:19:TMDS-19]
>[  646.474209] [drm:intel_modeset_check_state], [ENCODER:22:TV-22]
>[  646.474211] [drm:intel_modeset_check_state], [CRTC:3]
>[  646.474214] [drm:intel_modeset_check_state], [CRTC:4]
>[  646.474599] [drm:asle_set_backlight], bclp = 0x800000ff
>[  646.474601] [drm:intel_panel_get_max_backlight], max backlight PWM = 3157410
>[  647.200179] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  657.216182] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  667.232182] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  677.248183] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  687.264184] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  697.280181] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  707.296177] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  717.312178] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  727.328183] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  737.344178] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  747.360183] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  757.376179] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  767.392181] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  777.408180] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  787.424180] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  797.440180] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  807.456173] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  817.472176] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  827.488178] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  837.504179] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  847.520179] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  857.536180] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  867.552184] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  877.568185] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  887.584181] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  897.600185] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2
>[  907.616185] [drm:output_poll_execute], [CONNECTOR:21:SVIDEO-1] status updated from 2 to 2

Actions: View

Attachments on bug 54111: 66166 | 71737 | 72975

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.