Attachment 73284 Details for Bug 59572 – boot to blank screen, no fbcon present, using 3.8

boot to blank screen, no fbcon present, using 3.8

blind-boot-dmesg (text/plain), 53.41 KB, created by mlsemon35 on 2013-01-19 13:06:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: mlsemon35

Created: 2013-01-19 13:06:47 UTC

Size: 53.41 KB

patch

obsolete

>[    0.000000] Linux version 3.8.0-rc4 (root@plbearer) (gcc version 4.7.2 (GCC) ) #1 Fri Jan 18 00:08:16 EST 2013
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002feeffff] usable
>[    0.000000] BIOS-e820: [mem 0x000000002fef0000-0x000000002fef2fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x000000002fef3000-0x000000002fefffff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
>[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
>[    0.000000] SMBIOS 2.3 present.
>[    0.000000] DMI: Dell Computer Corporation Dimension 2350/07W080, BIOS A01 12/17/2002
>[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x2fef0 max_arch_pfn = 0x100000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-C9FFF write-protect
>[    0.000000]   CA000-F7FFF uncachable
>[    0.000000]   F8000-FBFFF write-through
>[    0.000000]   FC000-FFFFF uncachable
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask FC0000000 write-back
>[    0.000000]   1 base 02FF00000 mask FFFF00000 uncachable
>[    0.000000]   2 base 030000000 mask FF0000000 uncachable
>[    0.000000]   3 disabled
>[    0.000000]   4 disabled
>[    0.000000]   5 disabled
>[    0.000000]   6 disabled
>[    0.000000]   7 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
>[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x2feeffff]
>[    0.000000]  [mem 0x00000000-0x003fffff] page 4k
>[    0.000000]  [mem 0x00400000-0x2fbfffff] page 2M
>[    0.000000]  [mem 0x2fc00000-0x2feeffff] page 4k
>[    0.000000] kernel direct mapping tables up to 0x2feeffff @ [mem 0x01bfa000-0x01bfffff]
>[    0.000000] ACPI: RSDP 000f6d40 00014 (v00 IntelR)
>[    0.000000] ACPI: RSDT 2fef3000 00030 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
>[    0.000000] ACPI: FACP 2fef3040 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
>[    0.000000] ACPI: DSDT 2fef30c0 03543 (v01 INTELR AWRDACPI 00001000 MSFT 0100000C)
>[    0.000000] ACPI: FACS 2fef0000 00040
>[    0.000000] ACPI: BOOT 2fef6640 00028 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
>[    0.000000] ACPI: APIC 2fef6680 00054 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] 766MB LOWMEM available.
>[    0.000000]   mapped low ram: 0 - 2fef0000
>[    0.000000]   low ram: 0 - 2fef0000
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
>[    0.000000]   Normal   [mem 0x01000000-0x2feeffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
>[    0.000000]   node   0: [mem 0x00100000-0x2feeffff]
>[    0.000000] On node 0 totalpages: 196223
>[    0.000000] free_area_init_node: node 0, pgdat c16fa980, node_mem_map ef8f0200
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
>[    0.000000]   Normal zone: 1502 pages used for memmap
>[    0.000000]   Normal zone: 190738 pages, LIFO batch:31
>[    0.000000] Using APIC driver default
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] e820: [mem 0x2ff00000-0xfebfffff] available for PCI devices
>[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
>[    0.000000] pcpu-alloc: [0] 0 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 194689
>[    0.000000] Kernel command line: BOOT_IMAGE=Linux ro root=801 drm.debug=3 clocksource=acpi_pm lapic iTCO_wdt.heartbeat=60 vt.default_utf8=1 video=1024x768-16 video=1024x768M-8@75 drm.debug=6
>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>[    0.000000] __ex_table already sorted, skipping sort
>[    0.000000] Initializing CPU#0
>[    0.000000] Memory: 769920k/785344k available (4930k kernel code, 14972k reserved, 2235k data, 364k init, 0k highmem)
>[    0.000000] virtual kernel memory layout:
>[    0.000000]     fixmap  : 0xfffa3000 - 0xfffff000   ( 368 kB)
>[    0.000000]     vmalloc : 0xf06f0000 - 0xfffa1000   ( 248 MB)
>[    0.000000]     lowmem  : 0xc0000000 - 0xefef0000   ( 766 MB)
>[    0.000000]       .init : 0xc1700000 - 0xc175b000   ( 364 kB)
>[    0.000000]       .data : 0xc14d0b02 - 0xc16ff800   (2235 kB)
>[    0.000000]       .text : 0xc1000000 - 0xc14d0b02   (4930 kB)
>[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
>[    0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
>[    0.000000] NR_IRQS:2304 nr_irqs:256 16
>[    0.000000] CPU 0 irqstacks, hard=ef406000 soft=ef408000
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.000000] tsc: Detected 1794.247 MHz processor
>[    0.003335] Calibrating delay loop (skipped), value calculated using timer frequency.. 3589.01 BogoMIPS (lpj=5980823)
>[    0.003520] pid_max: default: 32768 minimum: 301
>[    0.006738] Mount-cache hash table entries: 512
>[    0.007113] Initializing cgroup subsys freezer
>[    0.007207] Initializing cgroup subsys net_cls
>[    0.007328] mce: CPU supports 4 MCE banks
>[    0.007433] CPU0: Thermal monitoring enabled (TM1)
>[    0.007548] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
>[    0.007548] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64
>[    0.007548] tlb_flushall_shift: 6
>[    0.007747] CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (fam: 0f, model: 02, stepping: 07)
>[    0.008053] ACPI: Core revision 20121018
>[    0.012997] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
>[    0.013176] ... version:                0
>[    0.013264] ... bit width:              40
>[    0.013338] ... generic registers:      18
>[    0.013427] ... value mask:             000000ffffffffff
>[    0.013517] ... max period:             0000007fffffffff
>[    0.013606] ... fixed-purpose events:   0
>[    0.013694] ... event mask:             000000000003ffff
>[    0.013968] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.014448] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.049999] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.049999] devtmpfs: initialized
>[    0.049999] NET: Registered protocol family 16
>[    0.049999] ACPI: bus type pci registered
>[    0.078378] PCI: PCI BIOS revision 2.10 entry at 0xfaea0, last bus=1
>[    0.078473] PCI: Using configuration type 1 for base access
>[    0.081519] bio: create slab <bio-0> at 0
>[    0.081733] ACPI: Added _OSI(Module Device)
>[    0.081825] ACPI: Added _OSI(Processor Device)
>[    0.081918] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.082010] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.083260] ACPI: EC: Look up EC in DSDT
>[    0.088001] ACPI: Interpreter enabled
>[    0.088094] ACPI: (supports S0 S5)
>[    0.088264] ACPI: Using IOAPIC for interrupt routing
>[    0.093461] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>[    0.093719] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.093816] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.094049] pci_root PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
>[    0.094194] pci_root PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
>[    0.094486] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>[    0.094493] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>[    0.094499] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
>[    0.094504] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
>[    0.094509] pci_root PNP0A03:00: host bridge window [mem 0x2ff00000-0xfebfffff] (ignored)
>[    0.094514] PCI: root bus 00: using default resources
>[    0.094521] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
>[    0.094712] PCI host bridge to bus 0000:00
>[    0.094806] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.094901] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
>[    0.094997] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
>[    0.095111] pci 0000:00:00.0: [8086:2560] type 00 class 0x060000
>[    0.095129] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xebffffff pref]
>[    0.095229] pci 0000:00:02.0: [8086:2562] type 00 class 0x030000
>[    0.095253] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
>[    0.095268] pci 0000:00:02.0: reg 14: [mem 0xee000000-0xee07ffff]
>[    0.095410] pci 0000:00:1d.0: [8086:24c2] type 00 class 0x0c0300
>[    0.095471] pci 0000:00:1d.0: reg 20: [io  0xd800-0xd81f]
>[    0.095521] pci 0000:00:1d.1: [8086:24c4] type 00 class 0x0c0300
>[    0.095582] pci 0000:00:1d.1: reg 20: [io  0xd000-0xd01f]
>[    0.095633] pci 0000:00:1d.2: [8086:24c7] type 00 class 0x0c0300
>[    0.095694] pci 0000:00:1d.2: reg 20: [io  0xd400-0xd41f]
>[    0.095756] pci 0000:00:1d.7: [8086:24cd] type 00 class 0x0c0320
>[    0.095783] pci 0000:00:1d.7: reg 10: [mem 0xee080000-0xee0803ff]
>[    0.095895] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>[    0.095922] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
>[    0.095984] pci 0000:00:1f.0: [8086:24c0] type 00 class 0x060100
>[    0.095991] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
>[    0.095991] * this clock source is slow. If you are sure your timer does not have
>[    0.095991] * this bug, please use "acpi_pm_good" to disable the workaround
>[    0.096399] pci 0000:00:1f.1: [8086:24cb] type 00 class 0x01018a
>[    0.096421] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
>[    0.096436] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
>[    0.096451] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
>[    0.096466] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
>[    0.096482] pci 0000:00:1f.1: reg 20: [io  0xf000-0xf00f]
>[    0.096497] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
>[    0.096543] pci 0000:00:1f.3: [8086:24c3] type 00 class 0x0c0500
>[    0.096604] pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
>[    0.096703] pci 0000:01:05.0: [8086:107c] type 00 class 0x020000
>[    0.096731] pci 0000:01:05.0: reg 10: [mem 0xed020000-0xed03ffff]
>[    0.096746] pci 0000:01:05.0: reg 14: [mem 0xed000000-0xed01ffff]
>[    0.096761] pci 0000:01:05.0: reg 18: [io  0xc000-0xc03f]
>[    0.096805] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>[    0.096855] pci 0000:01:05.0: PME# supported from D0 D3hot D3cold
>[    0.096886] pci 0000:01:06.0: [1274:1371] type 00 class 0x040100
>[    0.096910] pci 0000:01:06.0: reg 10: [io  0xc400-0xc43f]
>[    0.097005] pci 0000:01:06.0: supports D2
>[    0.097010] pci 0000:01:06.0: PME# supported from D0 D2 D3hot
>[    0.097061] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
>[    0.097161] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
>[    0.097169] pci 0000:00:1e.0:   bridge window [mem 0xec000000-0xedffffff]
>[    0.097177] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
>[    0.097182] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
>[    0.097196] pci_bus 0000:00: on NUMA node 0
>[    0.097212] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>[    0.097455] ACPI _OSC control for PCIe not granted, disabling ASPM
>[    0.112870] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>[    0.113428] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>[    0.114036] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>[    0.114644] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>[    0.115252] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>[    0.115978] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>[    0.116759] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>[    0.117483] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
>[    0.118265] SCSI subsystem initialized
>[    0.118358] ACPI: bus type scsi registered
>[    0.118537] libata version 3.00 loaded.
>[    0.118559] ACPI: bus type usb registered
>[    0.118703] usbcore: registered new interface driver usbfs
>[    0.118816] usbcore: registered new interface driver hub
>[    0.118943] usbcore: registered new device driver usb
>[    0.119122] Advanced Linux Sound Architecture Driver Initialized.
>[    0.119235] PCI: Using ACPI for IRQ routing
>[    0.119330] PCI: pci_cache_line_size set to 64 bytes
>[    0.119397] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
>[    0.119402] e820: reserve RAM buffer [mem 0x2fef0000-0x2fffffff]
>[    0.119797] Switching to clocksource refined-jiffies
>[    0.119957] FS-Cache: Loaded
>[    0.120071] CacheFiles: Loaded
>[    0.120183] pnp: PnP ACPI init
>[    0.120279] ACPI: bus type pnp registered
>[    0.120774] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
>[    0.120872] system 00:00: [mem 0x000d5000-0x000d7fff] has been reserved
>[    0.120967] system 00:00: [mem 0x000f0000-0x000fbfff] could not be reserved
>[    0.121063] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
>[    0.121159] system 00:00: [mem 0x2fef0000-0x2fefffff] could not be reserved
>[    0.121255] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
>[    0.121351] system 00:00: [mem 0x00100000-0x2feeffff] could not be reserved
>[    0.121447] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.121544] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.121641] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
>[    0.121737] system 00:00: [mem 0xfff00000-0xffffffff] has been reserved
>[    0.121834] system 00:00: [mem 0x000e0000-0x000effff] has been reserved
>[    0.121934] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.122084] system 00:01: [io  0x0400-0x04bf] has been reserved
>[    0.122182] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.122565] system 00:02: [io  0x04d0-0x04d1] has been reserved
>[    0.122663] system 00:02: [io  0x0800-0x087f] has been reserved
>[    0.122760] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.122789] pnp 00:03: [dma 4]
>[    0.122827] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.122902] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.122956] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
>[    0.123015] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.123553] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.124097] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
>[    0.124406] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
>[    0.124495] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.124510] pnp: PnP ACPI: found 11 devices
>[    0.124601] ACPI: ACPI bus type pnp unregistered
>[    0.124695] PnPBIOS: Disabled by ACPI PNP
>[    0.161935] Switching to clocksource acpi_pm
>[    0.162098] pci 0000:00:1e.0: BAR 9: assigned [mem 0x30000000-0x300fffff pref]
>[    0.162244] pci 0000:00:1f.1: BAR 5: assigned [mem 0x30100000-0x301003ff]
>[    0.162351] pci 0000:01:05.0: BAR 6: assigned [mem 0x30000000-0x3001ffff pref]
>[    0.162493] pci 0000:00:1e.0: PCI bridge to [bus 01]
>[    0.162587] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
>[    0.162686] pci 0000:00:1e.0:   bridge window [mem 0xec000000-0xedffffff]
>[    0.162784] pci 0000:00:1e.0:   bridge window [mem 0x30000000-0x300fffff pref]
>[    0.162942] pci 0000:00:1e.0: setting latency timer to 64
>[    0.162951] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>[    0.162956] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
>[    0.162961] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
>[    0.162966] pci_bus 0000:01: resource 1 [mem 0xec000000-0xedffffff]
>[    0.162971] pci_bus 0000:01: resource 2 [mem 0x30000000-0x300fffff pref]
>[    0.162976] pci_bus 0000:01: resource 4 [io  0x0000-0xffff]
>[    0.162981] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
>[    0.163046] NET: Registered protocol family 2
>[    0.163046] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
>[    0.163046] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
>[    0.163046] TCP: Hash tables configured (established 8192 bind 8192)
>[    0.163046] TCP: reno registered
>[    0.163117] UDP hash table entries: 512 (order: 2, 24576 bytes)
>[    0.163239] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
>[    0.163478] NET: Registered protocol family 1
>[    0.163606] pci 0000:00:02.0: Boot video device
>[    0.163803] PCI: CLS 32 bytes, default 64
>[    0.164065] Simple Boot Flag at 0x59 set to 0x1
>[    0.164508] microcode: CPU0 sig=0xf27, pf=0x4, revision=0x24
>[    0.164641] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    0.165033] audit: initializing netlink socket (disabled)
>[    0.165147] type=2000 audit(1358599418.159:1): initialized
>[    0.168146] VFS: Disk quotas dquot_6.5.2
>[    0.168316] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[    0.168778] DLM installed
>[    0.168970] FS-Cache: Netfs 'cifs' registered for caching
>[    0.169200] Key type cifs.idmap registered
>[    0.169411] JFS: nTxBlock = 6015, nTxLock = 48120
>[    0.176368] SGI XFS with ACLs, security attributes, realtime, no debug enabled
>[    0.177313] msgmni has been set to 1503
>[    0.179671] alg: No test for stdrng (krng)
>[    0.179793] io scheduler noop registered
>[    0.179883] io scheduler deadline registered
>[    0.179993] io scheduler cfq registered (default)
>[    0.181168] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
>[    0.181260] crc32: self tests passed, processed 225944 bytes in 509285 nsec
>[    0.181823] crc32c: CRC_LE_BITS = 64
>[    0.181913] crc32c: self tests passed, processed 225944 bytes in 231594 nsec
>[    0.182359] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>[    0.182511] ACPI: Power Button [PWRB]
>[    0.182704] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>[    0.182848] ACPI: Power Button [PWRF]
>[    0.183327] GHES: HEST is not enabled!
>[    0.183493] isapnp: Scanning for PnP cards...
>[    0.540690] isapnp: No Plug & Play device found
>[    0.542787] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.563549] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    0.564354] lp: driver loaded but no devices found
>[    0.564578] Non-volatile memory driver v1.3
>[    0.564715] intel_rng: FWH not detected
>[    0.564809] Linux agpgart interface v0.103
>[    0.564930] agpgart-intel 0000:00:00.0: Intel 845G Chipset
>[    0.565043] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable
>[    0.565351] agpgart-intel 0000:00:00.0: detected 1024K stolen memory
>[    0.565620] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
>[    0.565756] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
>[    0.565899] Hangcheck: Using getrawmonotonic().
>[    0.566037] [drm] Initialized drm 1.1.0 20060810
>[    0.566609] [drm:i915_dump_device_info], i915 device info: gen=2, pciid=0x2562 flags=has_overlay,overlay_needs_physical,
>[    0.566630] i915 0000:00:02.0: setting latency timer to 64
>[    0.566922] [drm:intel_opregion_setup], graphic opregion physical addr: 0x0
>[    0.566928] [drm:intel_opregion_setup], ACPI OpRegion not supported!
>[    0.566948] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    0.567045] [drm] Driver supports precise vblank timestamp query.
>[    0.567139] [drm:init_vbt_defaults], Set default to SSC at 66MHz
>[    0.567186] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 48 display_clock_mode 0
>[    0.567192] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[    0.567197] [drm:parse_sdvo_device_mapping], different child size is found. Invalid.
>[    0.567201] [drm:parse_device_mapping], different child size is found. Invalid.
>[    0.567225] [drm] applying pipe a force quirk
>[    0.567319] [drm:intel_modeset_init], 1 display pipe available.
>[    0.567333] [drm:intel_modeset_init], plane 0 init failed: -19
>[    0.567338] [drm:intel_pch_pll_init], No PCH PLLs on this hardware, skipping initialisation
>[    0.573360] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0038 r(1)
>[    0.580024] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0076 r(1)
>[    0.586690] [drm:gmbus_xfer], GMBUS [i915 gmbus ssc] NAK for addr: 0002 r(0)
>[    0.593357] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0038 r(1)
>[    0.593364] [drm:tfp410_init], tfp410 not detected got VID FFFFFFFF: from i915 gmbus dpb Slave 56.
>[    0.600024] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0075 r(1)
>[    0.606690] [drm:gmbus_xfer], GMBUS [i915 gmbus dpb] NAK for addr: 0038 r(1)
>[    0.611534] [drm] initialized overlay support
>[    0.611637] [drm:intel_modeset_setup_hw_state], [CRTC:3] hw state readout: enabled
>[    0.611644] [drm:intel_modeset_setup_hw_state], [ENCODER:5:DAC-5] hw state readout: enabled, pipe=0
>[    0.611650] [drm:intel_modeset_setup_hw_state], [CONNECTOR:4:VGA-1] hw state readout: enabled
>[    0.611658] [drm:intel_connector_check_state], [CONNECTOR:4:VGA-1]
>[    0.611663] [drm:intel_modeset_check_state], [ENCODER:5:DAC-5]
>[    0.611667] [drm:intel_modeset_check_state], [CRTC:3]
>[    0.611706] [drm:drm_fb_helper_parse_command_line], cmdline mode for connector VGA-1 1024x768@75Hz
>[    0.611714] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:4:VGA-1]
>[    0.736692] [drm:intel_crt_detect_ddc], CRT detected via DDC:0x50 [EDID]
>[    0.863435] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    0.863457] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:4:VGA-1] probed modes :
>[    0.863462] [drm:drm_mode_debug_printmodeline], Modeline 7:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[    0.863470] [drm:drm_mode_debug_printmodeline], Modeline 13:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    0.863477] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[    0.863484] [drm:drm_mode_debug_printmodeline], Modeline 25:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
>[    0.863491] [drm:drm_mode_debug_printmodeline], Modeline 24:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
>[    0.863498] [drm:drm_mode_debug_printmodeline], Modeline 8:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[    0.863505] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
>[    0.863512] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
>[    0.863518] [drm:drm_mode_debug_printmodeline], Modeline 14:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[    0.863525] [drm:drm_mode_debug_printmodeline], Modeline 21:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[    0.863532] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    0.863539] [drm:drm_mode_debug_printmodeline], Modeline 27:"1024x576" 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6
>[    0.863546] [drm:drm_mode_debug_printmodeline], Modeline 19:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[    0.863553] [drm:drm_mode_debug_printmodeline], Modeline 16:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[    0.863560] [drm:drm_mode_debug_printmodeline], Modeline 9:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    0.863566] [drm:drm_mode_debug_printmodeline], Modeline 18:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[    0.863573] [drm:drm_mode_debug_printmodeline], Modeline 20:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[    0.863580] [drm:drm_mode_debug_printmodeline], Modeline 17:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
>[    0.863587] [drm:drm_mode_debug_printmodeline], Modeline 10:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[    0.863594] [drm:drm_mode_debug_printmodeline], Modeline 11:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    0.863601] [drm:drm_mode_debug_printmodeline], Modeline 12:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    0.863608] [drm:drm_setup_crtcs], 
>[    0.863612] [drm:drm_enable_connectors], connector 4 enabled? yes
>[    0.863616] [drm:drm_target_preferred], looking for cmdline mode on connector 4
>[    0.863620] [drm:drm_target_preferred], found mode 1024x768
>[    0.863624] [drm:drm_setup_crtcs], picking CRTCs for 2048x2048 config
>[    0.863629] [drm:drm_setup_crtcs], desired mode 1024x768 set on crtc 3
>[    0.865761] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    0.866174] parport_pc 00:08: reported by Plug and Play ACPI
>[    0.866293] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>[    0.946783] lp0: using parport0 (interrupt-driven).
>[    0.948881] brd: module loaded
>[    0.949907] loop: module loaded
>[    0.950158] nbd: registered device at major 43
>[    0.952392] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
>[    0.952651] ata_piix 0000:00:1f.1: version 2.13
>[    0.952767] ata_piix 0000:00:1f.1: setting latency timer to 64
>[    0.953172] scsi0 : ata_piix
>[    0.953966] scsi1 : ata_piix
>[    0.954552] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
>[    0.954648] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
>[    0.954875] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.954968] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.955085] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.955179] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    1.219355] tsc: Refined TSC clocksource calibration: 1794.178 MHz
>[    1.224004] ata2.00: ATAPI: SAMSUNG CD-R/RW SW-252S, R902, max UDMA/33
>[    1.236922] ata2.00: configured for UDMA/33
>[    1.273362] ata1.00: ATA-7: ST3120814A, 3.AAJ, max UDMA/100
>[    1.273457] ata1.00: 234441648 sectors, multi 16: LBA48 
>[    1.339928] ata1.00: configured for UDMA/100
>[    1.340192] scsi 0:0:0:0: Direct-Access     ATA      ST3120814A       3.AA PQ: 0 ANSI: 5
>[    1.340677] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    1.341084] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
>[    1.341308] sd 0:0:0:0: [sda] Write Protect is off
>[    1.341444] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.341578] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.341893] scsi 1:0:0:0: CD-ROM            SAMSUNG  CD-R/RW SW-252S  R902 PQ: 0 ANSI: 5
>[    1.344420] sr0: scsi3-mmc drive: 48x/16x writer cd/rw xa/form2 cdda tray
>[    1.344520] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    1.344801] sr 1:0:0:0: Attached scsi CD-ROM sr0
>[    1.344979] sr 1:0:0:0: Attached scsi generic sg1 type 5
>[    1.388981] e1000 0000:01:05.0 eth0: (PCI:33MHz:32-bit) 00:0e:0c:bc:a3:91
>[    1.389082] e1000 0000:01:05.0 eth0: Intel(R) PRO/1000 Network Connection
>[    1.389215] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.389309] ehci-pci: EHCI PCI platform driver
>[    1.389458] ehci-pci 0000:00:1d.7: setting latency timer to 64
>[    1.389466] ehci-pci 0000:00:1d.7: EHCI Host Controller
>[    1.389566] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
>[    1.393626] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
>[    1.393653] ehci-pci 0000:00:1d.7: irq 23, io mem 0xee080000
>[    1.403365] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>[    1.403493] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.403589] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.403729] usb usb1: Product: EHCI Host Controller
>[    1.403820] usb usb1: Manufacturer: Linux 3.8.0-rc4 ehci_hcd
>[    1.403912] usb usb1: SerialNumber: 0000:00:1d.7
>[    1.404200] hub 1-0:1.0: USB hub found
>[    1.404296] hub 1-0:1.0: 6 ports detected
>[    1.404518] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.404663] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>[    1.404670] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>[    1.404770] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    1.404937] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
>[    1.405089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.405186] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.405325] usb usb2: Product: UHCI Host Controller
>[    1.405415] usb usb2: Manufacturer: Linux 3.8.0-rc4 uhci_hcd
>[    1.405507] usb usb2: SerialNumber: 0000:00:1d.0
>[    1.405766] hub 2-0:1.0: USB hub found
>[    1.405861] hub 2-0:1.0: 2 ports detected
>[    1.406037] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>[    1.406045] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>[    1.406143] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>[    1.406315] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
>[    1.406465] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.406561] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.406734] usb usb3: Product: UHCI Host Controller
>[    1.406826] usb usb3: Manufacturer: Linux 3.8.0-rc4 uhci_hcd
>[    1.406918] usb usb3: SerialNumber: 0000:00:1d.1
>[    1.407158] hub 3-0:1.0: USB hub found
>[    1.407252] hub 3-0:1.0: 2 ports detected
>[    1.407436] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>[    1.407443] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>[    1.407542] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>[    1.407753] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
>[    1.407997] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>[    1.408093] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.408232] usb usb4: Product: UHCI Host Controller
>[    1.408323] usb usb4: Manufacturer: Linux 3.8.0-rc4 uhci_hcd
>[    1.408415] usb usb4: SerialNumber: 0000:00:1d.2
>[    1.408665] hub 4-0:1.0: USB hub found
>[    1.408759] hub 4-0:1.0: 2 ports detected
>[    1.408969] usbcore: registered new interface driver usblp
>[    1.409061] Initializing USB Mass Storage driver...
>[    1.409206] usbcore: registered new interface driver usb-storage
>[    1.409298] USB Mass Storage support registered.
>[    1.409463] usbcore: registered new interface driver usbserial
>[    1.409572] usbcore: registered new interface driver usbserial_generic
>[    1.409679] usbserial: USB Serial support registered for generic
>[    1.409788] usbcore: registered new interface driver garmin_gps
>[    1.409896] usbserial: USB Serial support registered for Garmin GPS usb/tty
>[    1.410112] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    1.413644] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.413744] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.414043] mousedev: PS/2 mouse device common for all mice
>[    1.414451] input: PC Speaker as /devices/platform/pcspkr/input/input2
>[    1.414636] rtc_cmos 00:04: RTC can wake from S4
>[    1.414863] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>[    1.414985] rtc0: alarms up to one month, 242 bytes nvram
>[    1.415091] i2c /dev entries driver
>[    1.415631] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[    1.415748] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
>[    1.415950] iTCO_wdt: initialized. heartbeat=60 sec (nowayout=0)
>[    1.416054] iTCO_vendor_support: vendor-support=0
>[    1.416277] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
>[    1.416465] cpuidle: using governor ladder
>[    1.416628] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
>[    1.416900] usbcore: registered new interface driver usbhid
>[    1.416992] usbhid: USB HID core driver
>[    1.487583]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
>[    1.523107] sd 0:0:0:0: [sda] Attached SCSI disk
>[    1.535553] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>[    2.145413] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
>[    2.389235] TCP: cubic registered
>[    2.389330] Initializing XFRM netlink socket
>[    2.389642] NET: Registered protocol family 10
>[    2.390117] NET: Registered protocol family 17
>[    2.393273] sctp: Hash tables configured (established 65536 bind 52428)
>[    2.393756] Key type dns_resolver registered
>[    2.394249] Using IPI Shortcut mode
>[    2.395126] rtc_cmos 00:04: setting system clock to 2013-01-19 12:43:40 UTC (1358599420)
>[    2.395376] ALSA device list:
>[    2.395464]   #0: Ensoniq AudioPCI ENS1371 at 0xc400, irq 18
>[    2.432541] XFS (sda1): Mounting Filesystem
>[    2.538969] XFS (sda1): Ending clean mount
>[    2.539092] VFS: Mounted root (xfs filesystem) readonly on device 8:1.
>[    2.593235] devtmpfs: mounted
>[    2.593393] Freeing unused kernel memory: 364k freed
>[    2.594013] Write protecting the kernel text: 4932k
>[    2.594156] Write protecting the kernel read-only data: 1888k
>[    3.525614] udevd[89]: starting version 182
>[   17.841355] bio: create slab <bio-1> at 1
>[   20.058002] bio: create slab <bio-1> at 1
>[   22.320147] bio: create slab <bio-1> at 1
>[   22.612245] bio: create slab <bio-1> at 1
>[   22.690948] XFS (dm-0): Mounting Filesystem
>[   23.168335] XFS (dm-0): Ending clean mount
>[   29.224009] Adding 2096124k swap on /dev/mapper/swapCrypt.  Priority:-1 extents:1 across:2096124k 
>[   32.628219] XFS (dm-2): Mounting Filesystem
>[   33.022162] XFS (dm-2): Ending clean mount
>[   33.037614] XFS (dm-3): Mounting Filesystem
>[   33.154768] XFS (dm-3): Ending clean mount
>[   33.189303] XFS (dm-4): Mounting Filesystem
>[   33.433921] XFS (dm-4): Ending clean mount
>[   36.577736] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[   36.602008] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
>[   36.602558] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[  215.666832] [drm:i915_driver_open], 
>[  215.666942] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[  215.666950] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[  215.666954] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  215.666962] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[  215.666971] ------------[ cut here ]------------
>[  215.666986] WARNING: at drivers/gpu/drm/i915/intel_display.c:8114 intel_crtc_set_config+0x7ad/0x802()
>[  215.666991] Hardware name: Dimension 2350
>[  215.666994] Modules linked in:
>[  215.667001] Pid: 658, comm: X Not tainted 3.8.0-rc4 #1
>[  215.667005] Call Trace:
>[  215.667018]  [<c1027954>] warn_slowpath_common+0x67/0x8e
>[  215.667027]  [<c12da585>] ? intel_crtc_set_config+0x7ad/0x802
>[  215.667033]  [<c12da585>] ? intel_crtc_set_config+0x7ad/0x802
>[  215.667040]  [<c1027998>] warn_slowpath_null+0x1d/0x1f
>[  215.667046]  [<c12da585>] intel_crtc_set_config+0x7ad/0x802
>[  215.667056]  [<c1299d32>] drm_fb_helper_restore_fbdev_mode+0x32/0x5a
>[  215.667069]  [<c12f2b3d>] intel_fb_restore_mode+0x29/0x88
>[  215.667076]  [<c12b8b29>] i915_driver_lastclose+0x35/0x3d
>[  215.667083]  [<c12a14c2>] drm_lastclose+0x40/0x22e
>[  215.667089]  [<c12a1a99>] drm_release+0x3ad/0x51a
>[  215.667098]  [<c10a521a>] __fput+0xd8/0x26d
>[  215.667104]  [<c10a53b7>] ____fput+0x8/0xa
>[  215.667113]  [<c103bc36>] task_work_run+0x62/0x84
>[  215.667120]  [<c10027ac>] do_notify_resume+0x3d/0x55
>[  215.667129]  [<c14cf32f>] work_notifysig+0x24/0x29
>[  215.667134] ---[ end trace ef4691875b8f82d0 ]---
>[  215.667140] [drm:intel_modeset_stage_output_state], [CONNECTOR:4:VGA-1] to [NOCRTC]
>[  215.667144] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  215.667148] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  215.667152] [drm:intel_crtc_set_config], attempting to set mode from userspace
>[  215.667155] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[  215.667164] [drm:intel_set_mode], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[  215.667194] [drm:intel_modeset_check_state], [ENCODER:5:DAC-5]
>[  215.667198] [drm:intel_modeset_check_state], [CRTC:3]
>[  215.865263] [drm:i915_driver_open], 
>[  215.865321] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[  215.865329] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[  215.865333] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  215.865341] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[  215.865350] ------------[ cut here ]------------
>[  215.865365] WARNING: at drivers/gpu/drm/i915/intel_display.c:8114 intel_crtc_set_config+0x7ad/0x802()
>[  215.865369] Hardware name: Dimension 2350
>[  215.865373] Modules linked in:
>[  215.865380] Pid: 658, comm: X Tainted: G        W    3.8.0-rc4 #1
>[  215.865384] Call Trace:
>[  215.865396]  [<c1027954>] warn_slowpath_common+0x67/0x8e
>[  215.865404]  [<c12da585>] ? intel_crtc_set_config+0x7ad/0x802
>[  215.865412]  [<c12da585>] ? intel_crtc_set_config+0x7ad/0x802
>[  215.865419]  [<c1027998>] warn_slowpath_null+0x1d/0x1f
>[  215.865428]  [<c12da585>] intel_crtc_set_config+0x7ad/0x802
>[  215.865439]  [<c1299d32>] drm_fb_helper_restore_fbdev_mode+0x32/0x5a
>[  215.865449]  [<c12f2b3d>] intel_fb_restore_mode+0x29/0x88
>[  215.865455]  [<c12b8b29>] i915_driver_lastclose+0x35/0x3d
>[  215.865463]  [<c12a14c2>] drm_lastclose+0x40/0x22e
>[  215.865468]  [<c12a1a99>] drm_release+0x3ad/0x51a
>[  215.865477]  [<c10a521a>] __fput+0xd8/0x26d
>[  215.865483]  [<c10a53b7>] ____fput+0x8/0xa
>[  215.865491]  [<c103bc36>] task_work_run+0x62/0x84
>[  215.865500]  [<c10027ac>] do_notify_resume+0x3d/0x55
>[  215.865512]  [<c14cf32f>] work_notifysig+0x24/0x29
>[  215.865517] ---[ end trace ef4691875b8f82d1 ]---
>[  215.865521] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  215.865527] [drm:intel_modeset_stage_output_state], [CONNECTOR:4:VGA-1] to [CRTC:3]
>[  215.865532] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  215.865535] [drm:intel_crtc_set_config], attempting to set mode from userspace
>[  215.865539] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[  215.865548] [drm:intel_set_mode], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  215.865559] [drm:intel_modeset_adjusted_mode], [CRTC:3]
>[  215.870147] [drm:i8xx_irq_handler], pipe A underrun
>[  215.870185] [drm:i9xx_crtc_mode_set], Mode for pipe A:
>[  215.870189] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[  215.923337] [drm:intel_wait_for_vblank], vblank wait timed out
>[  215.923347] [drm:intel_pipe_set_base] *ERROR* No FB bound
>[  215.923355] [drm:intel_crtc_mode_set], [ENCODER:5:DAC-5] set [MODE:28:1024x768]
>[  215.976669] [drm:intel_wait_for_vblank], vblank wait timed out
>[  215.976733] [drm:intel_connector_check_state], [CONNECTOR:4:VGA-1]
>[  215.976738] [drm:intel_modeset_check_state], [ENCODER:5:DAC-5]
>[  215.976743] [drm:intel_modeset_check_state], [CRTC:3]
>[  215.976795] [drm:i915_driver_open], 
>[  215.976912] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[  215.976920] ------------[ cut here ]------------
>[  215.976933] WARNING: at drivers/gpu/drm/i915/intel_display.c:8114 intel_crtc_set_config+0x7ad/0x802()
>[  215.976938] Hardware name: Dimension 2350
>[  215.976941] Modules linked in:
>[  215.976948] Pid: 658, comm: X Tainted: G        W    3.8.0-rc4 #1
>[  215.976952] Call Trace:
>[  215.976965]  [<c1027954>] warn_slowpath_common+0x67/0x8e
>[  215.976974]  [<c12da585>] ? intel_crtc_set_config+0x7ad/0x802
>[  215.976980]  [<c12da585>] ? intel_crtc_set_config+0x7ad/0x802
>[  215.976987]  [<c1027998>] warn_slowpath_null+0x1d/0x1f
>[  215.976993]  [<c12da585>] intel_crtc_set_config+0x7ad/0x802
>[  215.977003]  [<c1299d32>] drm_fb_helper_restore_fbdev_mode+0x32/0x5a
>[  215.977013]  [<c12f2b3d>] intel_fb_restore_mode+0x29/0x88
>[  215.977022]  [<c12b8b29>] i915_driver_lastclose+0x35/0x3d
>[  215.977029]  [<c12a14c2>] drm_lastclose+0x40/0x22e
>[  215.977037]  [<c12a1a99>] drm_release+0x3ad/0x51a
>[  215.977046]  [<c10a521a>] __fput+0xd8/0x26d
>[  215.977054]  [<c10a53b7>] ____fput+0x8/0xa
>[  215.977064]  [<c103bc36>] task_work_run+0x62/0x84
>[  215.977072]  [<c10027ac>] do_notify_resume+0x3d/0x55
>[  215.977082]  [<c14cf32f>] work_notifysig+0x24/0x29
>[  215.977087] ---[ end trace ef4691875b8f82d2 ]---
>[  215.977092] [drm:intel_modeset_stage_output_state], [CONNECTOR:4:VGA-1] to [NOCRTC]
>[  215.977097] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  215.977101] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  215.977104] [drm:intel_crtc_set_config], attempting to set mode from userspace
>[  215.977108] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[  215.977118] [drm:intel_set_mode], set mode pipe masks: modeset: 0, prepare: 0, disable: 1
>[  215.983349] [drm:intel_modeset_check_state], [ENCODER:5:DAC-5]
>[  215.983356] [drm:intel_modeset_check_state], [CRTC:3]
>[  215.990148] [drm:i915_driver_open], 
>[  215.990187] [drm:intel_crtc_set_config], [CRTC:3] [NOFB]
>[  215.990194] ------------[ cut here ]------------
>[  215.990208] WARNING: at drivers/gpu/drm/i915/intel_display.c:8114 intel_crtc_set_config+0x7ad/0x802()
>[  215.990212] Hardware name: Dimension 2350
>[  215.990215] Modules linked in:
>[  215.990222] Pid: 658, comm: X Tainted: G        W    3.8.0-rc4 #1
>[  215.990226] Call Trace:
>[  215.990237]  [<c1027954>] warn_slowpath_common+0x67/0x8e
>[  215.990247]  [<c12da585>] ? intel_crtc_set_config+0x7ad/0x802
>[  215.990254]  [<c12da585>] ? intel_crtc_set_config+0x7ad/0x802
>[  215.990260]  [<c1027998>] warn_slowpath_null+0x1d/0x1f
>[  215.990266]  [<c12da585>] intel_crtc_set_config+0x7ad/0x802
>[  215.990275]  [<c1299d32>] drm_fb_helper_restore_fbdev_mode+0x32/0x5a
>[  215.990284]  [<c12f2b3d>] intel_fb_restore_mode+0x29/0x88
>[  215.990291]  [<c12b8b29>] i915_driver_lastclose+0x35/0x3d
>[  215.990298]  [<c12a14c2>] drm_lastclose+0x40/0x22e
>[  215.990303]  [<c12a1a99>] drm_release+0x3ad/0x51a
>[  215.990312]  [<c10a521a>] __fput+0xd8/0x26d
>[  215.990318]  [<c10a53b7>] ____fput+0x8/0xa
>[  215.990327]  [<c103bc36>] task_work_run+0x62/0x84
>[  215.990333]  [<c10027ac>] do_notify_resume+0x3d/0x55
>[  215.990343]  [<c14cf32f>] work_notifysig+0x24/0x29
>[  215.990347] ---[ end trace ef4691875b8f82d3 ]---
>[  215.990351] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[  215.990357] [drm:intel_modeset_stage_output_state], [CONNECTOR:4:VGA-1] to [CRTC:3]
>[  215.990361] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[  215.990364] [drm:intel_crtc_set_config], attempting to set mode from userspace
>[  215.990369] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[  215.990378] [drm:intel_set_mode], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  215.990388] [drm:intel_modeset_adjusted_mode], [CRTC:3]
>[  215.995016] [drm:i9xx_crtc_mode_set], Mode for pipe A:
>[  215.995021] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[  216.046691] [drm:intel_wait_for_vblank], vblank wait timed out
>[  216.046699] [drm:intel_pipe_set_base] *ERROR* No FB bound
>[  216.046707] [drm:intel_crtc_mode_set], [ENCODER:5:DAC-5] set [MODE:28:1024x768]
>[  216.100002] [drm:intel_wait_for_vblank], vblank wait timed out
>[  216.100065] [drm:intel_connector_check_state], [CONNECTOR:4:VGA-1]
>[  216.100070] [drm:intel_modeset_check_state], [ENCODER:5:DAC-5]
>[  216.100075] [drm:intel_modeset_check_state], [CRTC:3]
>[  216.100117] [drm:i915_driver_open], 
>[  216.101687] [drm:i915_getparam], Unknown parameter 26
>[  216.105931] [drm:drm_mode_getresources], CRTC[1] CONNECTORS[1] ENCODERS[1]
>[  216.105947] [drm:drm_mode_getresources], CRTC[1] CONNECTORS[1] ENCODERS[1]
>[  216.106054] [drm:drm_mode_getconnector], [CONNECTOR:4:?]
>[  216.106063] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:4:VGA-1]
>[  216.230006] [drm:intel_crt_detect_ddc], CRT detected via DDC:0x50 [EDID]
>[  216.356819] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  216.356857] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:4:VGA-1] probed modes :
>[  216.356863] [drm:drm_mode_debug_printmodeline], Modeline 7:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[  216.356872] [drm:drm_mode_debug_printmodeline], Modeline 13:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[  216.356880] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[  216.356887] [drm:drm_mode_debug_printmodeline], Modeline 25:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
>[  216.356895] [drm:drm_mode_debug_printmodeline], Modeline 24:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
>[  216.356903] [drm:drm_mode_debug_printmodeline], Modeline 8:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[  216.356910] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
>[  216.356918] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
>[  216.356926] [drm:drm_mode_debug_printmodeline], Modeline 14:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[  216.356933] [drm:drm_mode_debug_printmodeline], Modeline 21:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[  216.356941] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  216.356949] [drm:drm_mode_debug_printmodeline], Modeline 27:"1024x576" 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6
>[  216.356956] [drm:drm_mode_debug_printmodeline], Modeline 19:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[  216.356964] [drm:drm_mode_debug_printmodeline], Modeline 16:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[  216.356972] [drm:drm_mode_debug_printmodeline], Modeline 9:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[  216.356979] [drm:drm_mode_debug_printmodeline], Modeline 18:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[  216.356987] [drm:drm_mode_debug_printmodeline], Modeline 20:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[  216.356995] [drm:drm_mode_debug_printmodeline], Modeline 17:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
>[  216.357002] [drm:drm_mode_debug_printmodeline], Modeline 10:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[  216.357010] [drm:drm_mode_debug_printmodeline], Modeline 11:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[  216.357018] [drm:drm_mode_debug_printmodeline], Modeline 12:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[  216.357040] [drm:drm_mode_getconnector], [CONNECTOR:4:?]
>[  216.357410] [drm:drm_mode_getconnector], [CONNECTOR:4:?]
>[  216.357418] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:4:VGA-1]
>[  216.483340] [drm:intel_crt_detect_ddc], CRT detected via DDC:0x50 [EDID]
>[  216.610092] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  216.610131] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:4:VGA-1] probed modes :
>[  216.610136] [drm:drm_mode_debug_printmodeline], Modeline 7:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x48 0x5
>[  216.610145] [drm:drm_mode_debug_printmodeline], Modeline 13:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
>[  216.610152] [drm:drm_mode_debug_printmodeline], Modeline 26:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[  216.610160] [drm:drm_mode_debug_printmodeline], Modeline 25:"1280x800" 75 106500 1280 1360 1488 1696 800 803 809 838 0x40 0x6
>[  216.610167] [drm:drm_mode_debug_printmodeline], Modeline 24:"1280x800" 60 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
>[  216.610175] [drm:drm_mode_debug_printmodeline], Modeline 8:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
>[  216.610183] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x768" 75 102250 1280 1360 1488 1696 768 771 778 805 0x40 0x9
>[  216.610190] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x768" 60 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
>[  216.610198] [drm:drm_mode_debug_printmodeline], Modeline 14:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[  216.610205] [drm:drm_mode_debug_printmodeline], Modeline 21:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
>[  216.610213] [drm:drm_mode_debug_printmodeline], Modeline 15:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  216.610221] [drm:drm_mode_debug_printmodeline], Modeline 27:"1024x576" 60 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6
>[  216.610228] [drm:drm_mode_debug_printmodeline], Modeline 19:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
>[  216.610236] [drm:drm_mode_debug_printmodeline], Modeline 16:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
>[  216.610243] [drm:drm_mode_debug_printmodeline], Modeline 9:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[  216.610251] [drm:drm_mode_debug_printmodeline], Modeline 18:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
>[  216.610258] [drm:drm_mode_debug_printmodeline], Modeline 20:"848x480" 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
>[  216.610266] [drm:drm_mode_debug_printmodeline], Modeline 17:"640x480" 73 31500 640 664 704 832 480 489 492 520 0x40 0xa
>[  216.610273] [drm:drm_mode_debug_printmodeline], Modeline 10:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
>[  216.610281] [drm:drm_mode_debug_printmodeline], Modeline 11:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[  216.610288] [drm:drm_mode_debug_printmodeline], Modeline 12:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[  216.610317] [drm:drm_mode_getconnector], [CONNECTOR:4:?]
>[  216.910884] [drm:drm_mode_addfb], [FB:29]
>[  216.910900] [drm:drm_mode_setcrtc], [CRTC:3]
>[  216.910912] [drm:drm_mode_setcrtc], [CONNECTOR:4:VGA-1]
>[  216.910917] [drm:intel_crtc_set_config], [CRTC:3] [FB:29] #connectors=1 (x y) (0 0)
>[  216.910925] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
>[  216.910929] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[  216.910934] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
>[  216.910942] [drm:drm_mode_debug_printmodeline], Modeline 30:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  216.910952] [drm:intel_modeset_stage_output_state], [CONNECTOR:4:VGA-1] to [CRTC:3]
>[  216.910957] [drm:intel_crtc_set_config], attempting to set mode from userspace
>[  216.910960] [drm:drm_mode_debug_printmodeline], Modeline 30:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  216.910969] [drm:intel_set_mode], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  216.910976] [drm:intel_modeset_adjusted_mode], [CRTC:3]
>[  216.921278] [drm:i9xx_crtc_mode_set], Mode for pipe A:
>[  216.921286] [drm:drm_mode_debug_printmodeline], Modeline 30:"" 0 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x0 0x5
>[  216.973334] [drm:intel_wait_for_vblank], vblank wait timed out
>[  216.997221] [drm:i9xx_update_plane], Writing base 00800000 00000000 0 0 8192
>[  216.997244] [drm:intel_crtc_mode_set], [ENCODER:5:DAC-5] set [MODE:30:]
>[  216.997251] [drm:i845_get_fifo_size], FIFO size - (0x0000005f) A: 23
>[  216.997256] [drm:intel_calculate_wm], FIFO entries required for mode: 68
>[  216.997260] [drm:intel_calculate_wm], FIFO watermark level: -47
>[  216.997264] [drm:i830_update_wm], Setting FIFO watermarks - A: 1
>[  217.050002] [drm:intel_wait_for_vblank], vblank wait timed out
>[  217.050060] [drm:intel_connector_check_state], [CONNECTOR:4:VGA-1]
>[  217.050065] [drm:intel_modeset_check_state], [ENCODER:5:DAC-5]
>[  217.050070] [drm:intel_modeset_check_state], [CRTC:3]
>[  221.391738] [drm:intel_crtc_cursor_set], cursor off

Actions: View

Attachments on bug 59572: 73254 | 73283 | 73284 | 73371 | 73372 | 73994 | 73995

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.