Attachment 73827 Details for Bug 60009 – dmesg output

dmesg output

dmesg.txt (text/plain), 19.22 KB, created by Benny Ammitzbøll on 2013-01-29 12:53:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Benny Ammitzbøll

Created: 2013-01-29 12:53:49 UTC

Size: 19.22 KB

patch

obsolete

>sd 1:0:0:0: [sda] 4096-byte physical blocks
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MK1059GS GU00 PQ: 0 ANSI: 5
>sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>sd 2:0:0:0: [sdb] 4096-byte physical blocks
>sd 2:0:0:0: [sdb] Write Protect is off
>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata4.00: configured for UDMA/100
>scsi 3:0:0:0: CD-ROM            hp       BDDVDRW CA30P    QC01 PQ: 0 ANSI: 5
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
> sda: sda1 sda2 sda3
>sd 1:0:0:0: [sda] Attached SCSI disk
> sdb: sdb1 sdb2 sdb3
>sd 2:0:0:0: [sdb] Attached SCSI disk
>sd 1:0:0:0: Attached scsi generic sg0 type 0
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sr 3:0:0:0: Attached scsi generic sg2 type 5
>scsi: <fdomain> Detection failed (no card)
>GDT-HA: Storage RAID Controller Driver. Version: 3.05
>imm: Version 2.05 (for Linux 2.4.0)
>Fusion MPT base driver 3.04.20
>Copyright (c) 1999-2008 LSI Corporation
>Fusion MPT SPI Host driver 3.04.20
>Fusion MPT FC Host driver 3.04.20
>Fusion MPT SAS Host driver 3.04.20
>3ware Storage Controller device driver for Linux v1.26.02.003.
>3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
>Compaq SMART2 Driver (v 2.6.0)
>HP CISS Driver (v 3.6.26)
>Adaptec aacraid driver 1.2-0[29800]-ms
>megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
>megasas: 00.00.06.15-rc1 Mon. Mar. 19 17:00:00 PDT 2012
>qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.04.00.03-k.
>Emulex LightPulse Fibre Channel SCSI driver 8.3.32
>Copyright(c) 2004-2009 Emulex.  All rights reserved.
>aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>ACPI: bus type usb registered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci_hcd 0000:00:1a.0: setting latency timer to 64
>ehci_hcd 0000:00:1a.0: EHCI Host Controller
>ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1a.0: debug port 2
>ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc3809000
>ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 3.6.11-gentoo ehci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ehci_hcd 0000:00:1d.0: setting latency timer to 64
>ehci_hcd 0000:00:1d.0: EHCI Host Controller
>ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:1d.0: debug port 2
>ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
>ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc3808000
>ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: EHCI Host Controller
>usb usb2: Manufacturer: Linux 3.6.11-gentoo ehci_hcd
>usb usb2: SerialNumber: 0000:00:1d.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>uhci_hcd: USB Universal Host Controller Interface driver
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>xhci_hcd 0000:11:00.0: xHCI Host Controller
>xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 3
>xhci_hcd 0000:11:00.0: irq 18, io mem 0xc1500000
>xhci_hcd 0000:11:00.0: irq 44 for MSI/MSI-X
>xhci_hcd 0000:11:00.0: irq 45 for MSI/MSI-X
>xhci_hcd 0000:11:00.0: irq 46 for MSI/MSI-X
>xhci_hcd 0000:11:00.0: irq 47 for MSI/MSI-X
>xhci_hcd 0000:11:00.0: irq 48 for MSI/MSI-X
>xhci_hcd 0000:11:00.0: irq 49 for MSI/MSI-X
>xhci_hcd 0000:11:00.0: irq 50 for MSI/MSI-X
>xhci_hcd 0000:11:00.0: irq 51 for MSI/MSI-X
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: xHCI Host Controller
>usb usb3: Manufacturer: Linux 3.6.11-gentoo xhci_hcd
>usb usb3: SerialNumber: 0000:11:00.0
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>xhci_hcd 0000:11:00.0: xHCI Host Controller
>xhci_hcd 0000:11:00.0: new USB bus registered, assigned bus number 4
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: xHCI Host Controller
>usb usb4: Manufacturer: Linux 3.6.11-gentoo xhci_hcd
>usb usb4: SerialNumber: 0000:11:00.0
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new high-speed USB device number 2 using ehci_hcd
>xhci_hcd 0000:12:00.0: xHCI Host Controller
>xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 5
>xhci_hcd 0000:12:00.0: irq 19, io mem 0xc1400000
>xhci_hcd 0000:12:00.0: irq 52 for MSI/MSI-X
>xhci_hcd 0000:12:00.0: irq 53 for MSI/MSI-X
>xhci_hcd 0000:12:00.0: irq 54 for MSI/MSI-X
>xhci_hcd 0000:12:00.0: irq 55 for MSI/MSI-X
>xhci_hcd 0000:12:00.0: irq 56 for MSI/MSI-X
>xhci_hcd 0000:12:00.0: irq 57 for MSI/MSI-X
>xhci_hcd 0000:12:00.0: irq 58 for MSI/MSI-X
>xhci_hcd 0000:12:00.0: irq 59 for MSI/MSI-X
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: xHCI Host Controller
>usb usb5: Manufacturer: Linux 3.6.11-gentoo xhci_hcd
>usb usb5: SerialNumber: 0000:12:00.0
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>xhci_hcd 0000:12:00.0: xHCI Host Controller
>xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 6
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: xHCI Host Controller
>usb usb6: Manufacturer: Linux 3.6.11-gentoo xhci_hcd
>usb usb6: SerialNumber: 0000:12:00.0
>xHCI xhci_add_endpoint called for root hub
>xHCI xhci_check_bandwidth called for root hub
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 6 ports detected
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>usb 2-1: new high-speed USB device number 2 using ehci_hcd
>usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 6 ports detected
>usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
>usb 1-1.3: New USB device found, idVendor=0a5c, idProduct=21e1
>usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-1.3: Product: BCM20702A0
>usb 1-1.3: Manufacturer: Broadcom Corp
>usb 1-1.3: SerialNumber: 60D819F033AF
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
>usb 2-1.2: new full-speed USB device number 3 using ehci_hcd
>usb 2-1.2: New USB device found, idVendor=046d, idProduct=c52f
>usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1.2: Product: USB Receiver
>usb 2-1.2: Manufacturer: Logitech
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5
>hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input0
>input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input6
>hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input1
>usb 2-1.5: new high-speed USB device number 4 using ehci_hcd
>usb 2-1.5: New USB device found, idVendor=0424, idProduct=b832
>usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1.5: Product: HP Wireless Audio Adapter
>usb 2-1.5: Manufacturer: Standard Microsystems Corp.
>input: Standard Microsystems Corp. HP Wireless Audio Adapter as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.3/input/input7
>hid-generic 0003:0424:B832.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Standard Microsystems Corp. HP Wireless Audio Adapter] on usb-0000:00:1d.0-1.5/input3
>usb 2-1.6: new high-speed USB device number 5 using ehci_hcd
>md: raid0 personality registered for level 0
>usb 2-1.6: New USB device found, idVendor=064e, idProduct=e258
>usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 2-1.6: Product: HP TrueVision HD
>usb 2-1.6: Manufacturer: SuYin
>
>usb 2-1.6: SerialNumber: HF1016-A821-OV01-VH-R01.01.00
>md: raid1 personality registered for level 1
>async_tx: api initialized (async)
>raid6: sse2x1    4305 MB/s
>raid6: sse2x2    5310 MB/s
>raid6: sse2x4    6164 MB/s
>raid6: using algorithm sse2x4 (6164 MB/s)
>raid6: using ssse3x2 recovery algorithm
>xor: automatically using best checksumming function:
>   avx       : 10042.000 MB/sec
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>md: raid10 personality registered for level 10
>md: linear personality registered for level -1
>md: multipath personality registered for level -4
>JFS: nTxBlock = 8192, nTxLock = 65536
>RPC: Registered named UNIX socket transport module.
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>RPC: Registered tcp NFSv4.1 backchannel transport module.
>fuse init (API version 7.20)
>e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>e1000: Copyright (c) 1999-2006 Intel Corporation.
>Loading iSCSI transport class v2.0-870.
>md: md127 stopped.
>md: bind<sdb3>
>md: bind<sda3>
>bio: create slab <bio-1> at 1
>md/raid0:md127: md_size is 3889739776 sectors.
>md: RAID0 configuration for md127 - 1 zone
>ACPI: Invalid Power Resource to register!
>md: zone0=[sda3/sdb3]
>      zone-offset=         0KB, device-offset=         0KB, size=1944869888KB
>
>md127: detected capacity change from 0 to 1991546765312
> md127: unknown partition table
>md: md126 stopped.
>md: bind<sdb1>
>md: bind<sda1>
>md/raid1:md126: active with 2 out of 2 mirrors
>md126: detected capacity change from 0 to 134152192
> md126: unknown partition table
>md: Autodetecting RAID arrays.
>md: could not open unknown-block(8,1).
>md: could not open unknown-block(8,3).
>md: could not open unknown-block(8,17).
>md: could not open unknown-block(8,19).
>md: Scanned 4 and added 0 devices.
>md: autorun ...
>md: ... autorun DONE.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs (dm-0): mounted filesystem with ordered data mode
>systemd-udevd[15796]: starting version 197
>ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
>ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>input: PC Speaker as /devices/platform/pcspkr/input/input8
>microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a
>rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.
>Initializing Realtek PCIE storage driver...
>Resource length: 0x1000
>Original address: 0xc1700000, remapped address: 0xffffc900100fa000
>pci->irq = 18
>rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18
>microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a
>microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a
>microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a
>microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x1a
>microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x1a
>microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x1a
>microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x1a
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>atl1c 0000:10:00.0: version 1.0.1.0-NAPI
>scsi6 : SCSI emulation for PCI-Express Mass Storage devices
>rts_pstor: waiting for device to settle before scanning
>cfg80211: Calling CRDA to update world regulatory domain
>hp_accel: laptop model unknown, using default axes configuration
>lis3lv02d: 8 bits 3DC sensor found
>Intel(R) Wireless WiFi driver for Linux, in-tree:
>Copyright(c) 2003-2012 Intel Corporation
>iwlwifi 0000:09:00.0: pci_resource_len = 0x00002000
>iwlwifi 0000:09:00.0: pci_resource_base = ffffc90000068000
>iwlwifi 0000:09:00.0: HW Revision ID = 0x3E
>iwlwifi 0000:09:00.0: irq 60 for MSI/MSI-X
>input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
>Registered led device: hp::hddprotect
>hp_accel: driver loaded
>iwlwifi 0000:09:00.0: loaded firmware version 9.221.4.1 build 25532
>iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
>iwldvm: Copyright(c) 2003-2012 Intel Corporation
>iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUG disabled
>iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
>iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
>iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
>iwlwifi 0000:09:00.0: CONFIG_IWLWIFI_P2P enabled
>iwlwifi 0000:09:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
>iwlwifi 0000:09:00.0: L1 Enabled; Disabling L0S
>iwlwifi 0000:09:00.0: device EEPROM VER=0x43a, CALIB=0x6
>iwlwifi 0000:09:00.0: Device SKU: 0x1F0
>iwlwifi 0000:09:00.0: Valid Tx ant: 0x7, Valid Rx ant: 0x7
>Registered led device: phy0-led
>kvm: disabled by bios
>Linux agpgart interface v0.103
>ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
>snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
>[drm] Initialized drm 1.1.0 20060810
>rts_pstor: device scan complete
>scsi 6:0:0:0: Direct-Access     Generic- xD/SD/M.S.       1.00 PQ: 0 ANSI: 0 CCS
>sd 6:0:0:0: Attached scsi generic sg3 type 0
>sd 6:0:0:0: [sdc] Attached SCSI removable disk
>[drm] radeon defaulting to kernel modesetting.
>[drm] radeon kernel modesetting enabled.
>VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
>radeon 0000:01:00.0: enabling device (0000 -> 0003)
>[drm] initializing kernel modesetting (TURKS 0x1002:0x6740 0x103C:0x168A).
>[drm] register mmio base: 0xC2800000
>[drm] register mmio size: 131072
>ATOM BIOS: HP
>radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
>radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
>mtrr: no more MTRRs available
>[drm] Detected VRAM RAM=1024M, BAR=256M
>[drm] RAM width 128bits DDR
>[TTM] Zone  kernel: Available graphics memory: 4065884 kiB
>[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[TTM] Initializing pool allocator
>[TTM] Initializing DMA pool allocator
>[drm] radeon: 1024M of VRAM memory ready
>[drm] radeon: 512M of GTT memory ready.
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>radeon 0000:01:00.0: irq 62 for MSI/MSI-X
>radeon 0000:01:00.0: radeon: using MSI.
>[drm] radeon: irq initialized.
>[drm] GART: num cpu pages 131072, num gpu pages 131072
>[drm] probing gen 2 caps for device 8086:101 = 2/0
>[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[drm] Loading TURKS Microcode
>[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>radeon 0000:01:00.0: WB enabled
>radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880255a3ec00
>[drm] ring test on 0 succeeded in 3 usecs
>[drm] ib test on ring 0 succeeded in 0 usecs
>[drm] Radeon Display Connectors
>[drm] Connector 0:
>[drm]   eDP-1
>[drm]   HPD2
>[drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
>[drm]   Encoders:
>[drm]     LCD1: INTERNAL_UNIPHY1
>[drm] Connector 1:
>[drm]   DP-1
>[drm]   HPD3
>[drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
>[drm]   Encoders:
>[drm]     DFP1: INTERNAL_UNIPHY2
>[drm] Connector 2:
>[drm]   DP-2
>[drm]   HPD4
>[drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
>[drm]   Encoders:
>[drm]     DFP2: INTERNAL_UNIPHY2
>[drm] Connector 3:
>[drm]   HDMI-A-1
>[drm]   HPD1
>[drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
>[drm]   Encoders:
>[drm]     DFP3: INTERNAL_UNIPHY1
>[drm] Internal thermal controller with fan control
>[drm] radeon: power management initialized
>[drm] fb mappable at 0xA0142000
>[drm] vram apper at 0xA0000000
>[drm] size 8294400
>[drm] fb depth is 24
>[drm]    pitch is 7680
>fb1: radeondrmfb frame buffer device
>drm: registered panic notifier
>[drm] Initialized radeon 2.24.0 20080528 for 0000:01:00.0 on minor 0
>hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
>snd_hda_intel 0000:01:00.1: irq 63 for MSI/MSI-X
>pci 0000:00:00.0: Intel Sandybridge Chipset
>pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
>pci 0000:00:00.0: detected 32768K stolen memory
>i915 0000:00:02.0: setting latency timer to 64
>i915 0000:00:02.0: irq 64 for MSI/MSI-X
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] Driver supports precise vblank timestamp query.
>vga_switcheroo: enabled
>radeon atpx: version is 1
>vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
>vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
>[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
>fbcon: inteldrmfb (fb2) is primary device
>fbcon: Remapping primary device, fb2, to tty 1-63
>fb2: inteldrmfb frame buffer device
>[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
>acpi device:31: registered as cooling_device9
>ACPI: Video Device [PEGP] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2f/LNXVIDEO:00/input/input10
>acpi device:3e: registered as cooling_device10
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
>[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
>EXT3-fs (dm-0): using internal journal
>Adding 4194300k swap on /dev/mapper/swapa.  Priority:-1 extents:1 across:4194300k 
>Adding 4194300k swap on /dev/mapper/swapb.  Priority:-2 extents:1 across:4194300k 
>atl1c 0000:10:00.0: irq 65 for MSI/MSI-X
>atl1c 0000:10:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
>iwlwifi 0000:09:00.0: L1 Enabled; Disabling L0S
>iwlwifi 0000:09:00.0: Radio type=0x0-0x3-0x1
>iwlwifi 0000:09:00.0: L1 Enabled; Disabling L0S
>iwlwifi 0000:09:00.0: Radio type=0x0-0x3-0x1
>wlan0: authenticate with 58:6d:8f:fe:47:3a
>wlan0: direct probe to 58:6d:8f:fe:47:3a (try 1/3)
>wlan0: direct probe to 58:6d:8f:fe:47:3a (try 2/3)
>wlan0: send auth to 58:6d:8f:fe:47:3a (try 3/3)
>wlan0: authenticated
>wlan0: associate with 58:6d:8f:fe:47:3a (try 1/3)
>wlan0: RX AssocResp from 58:6d:8f:fe:47:3a (capab=0x411 status=0 aid=15)
>wlan0: associated
>NET: Registered protocol family 10
>ata2.00: configured for UDMA/100
>ata2: EH complete
>ata3.00: configured for UDMA/100
>ata3: EH complete
>hda-intel: Disabling 0000:01:00.1 via VGA-switcheroo
>hda-intel: Cannot lock devices!
>radeon: switched off

Actions: View

Attachments on bug 60009: 73821 | 73822 | 73827 | 73832 | 73833

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.