Attachment 78735 Details for Bug 61747 – dmesg output showing GPU lockup

dmesg output showing GPU lockup

LINUX-3.8.9-200.fc18.x86_64 (text/plain), 61.22 KB, created by Chris Rankin on 2013-05-01 19:10:19 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Chris Rankin

Created: 2013-05-01 19:10:19 UTC

Size: 61.22 KB

patch

obsolete

>[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
>[    0.000000] reg 2, base: 4GB, range: 1GB, type WB
>[    0.000000] reg 3, base: 5112MB, range: 8MB, type UC
>[    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
>[    0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
>[    0.000000] found SMP MP-table at [mem 0x000fccf0-0x000fccff] mapped at [ffff8800000fccf0]
>[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
>[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
>[    0.000000] init_memory_mapping: [mem 0x00000000-0xbf7fffff]
>[    0.000000]  [mem 0x00000000-0xbf7fffff] page 2M
>[    0.000000] kernel direct mapping tables up to 0xbf7fffff @ [mem 0x1fffc000-0x1fffffff]
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x13f7fffff]
>[    0.000000]  [mem 0x100000000-0x13f7fffff] page 2M
>[    0.000000] kernel direct mapping tables up to 0x13f7fffff @ [mem 0xbf7fe000-0xbf7fffff]
>[    0.000000] RAMDISK: [mem 0x35aa0000-0x36d47fff]
>[    0.000000] ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
>[    0.000000] ACPI: XSDT 00000000bf467068 0004C (v01 ALASKA    A M I 01072009 AMI  00010013)
>[    0.000000] ACPI: FACP 00000000bf470ac0 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
>[    0.000000] ACPI: DSDT 00000000bf467140 0997F (v02 ALASKA    A M I 00000000 INTL 20051117)
>[    0.000000] ACPI: FACS 00000000bf5d8f80 00040
>[    0.000000] ACPI: APIC 00000000bf470bb8 00072 (v03 ALASKA    A M I 01072009 AMI  00010013)
>[    0.000000] ACPI: SSDT 00000000bf470c30 00102 (v01 AMICPU     PROC 00000001 MSFT 03000001)
>[    0.000000] ACPI: MCFG 00000000bf470d38 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
>[    0.000000] ACPI: HPET 00000000bf470d78 00038 (v01 ALASKA    A M I 01072009 AMI. 00000004)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] No NUMA configuration found
>[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000013f7fffff]
>[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13f7fffff]
>[    0.000000]   NODE_DATA [mem 0x13f7ec000-0x13f7fffff]
>[    0.000000]  [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ae00000-ffff88013edfffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x13f7fffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00010000-0x0009dfff]
>[    0.000000]   node   0: [mem 0x00100000-0xbf41cfff]
>[    0.000000]   node   0: [mem 0xbf5cc000-0xbf5cdfff]
>[    0.000000]   node   0: [mem 0xbf680000-0xbf7fffff]
>[    0.000000]   node   0: [mem 0x100000000-0x13f7fffff]
>[    0.000000] On node 0 totalpages: 1043757
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 6 pages reserved
>[    0.000000]   DMA zone: 3912 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 12183 pages used for memmap
>[    0.000000]   DMA32 zone: 767496 pages, LIFO batch:31
>[    0.000000]   Normal zone: 4064 pages used for memmap
>[    0.000000]   Normal zone: 256032 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
>[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
>[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>[    0.000000] PM: Registered nosave memory: 00000000bf41d000 - 00000000bf474000
>[    0.000000] PM: Registered nosave memory: 00000000bf474000 - 00000000bf5a7000
>[    0.000000] PM: Registered nosave memory: 00000000bf5a7000 - 00000000bf5b8000
>[    0.000000] PM: Registered nosave memory: 00000000bf5b8000 - 00000000bf5cc000
>[    0.000000] PM: Registered nosave memory: 00000000bf5ce000 - 00000000bf5cf000
>[    0.000000] PM: Registered nosave memory: 00000000bf5cf000 - 00000000bf5d7000
>[    0.000000] PM: Registered nosave memory: 00000000bf5d7000 - 00000000bf5e1000
>[    0.000000] PM: Registered nosave memory: 00000000bf5e1000 - 00000000bf63d000
>[    0.000000] PM: Registered nosave memory: 00000000bf63d000 - 00000000bf680000
>[    0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000fed1c000
>[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
>[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
>[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
>[    0.000000] e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices
>[    0.000000] Booting paravirtualized kernel on bare hardware
>[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013f400000 s84608 r8192 d21888 u524288
>[    0.000000] pcpu-alloc: s84608 r8192 d21888 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1027440
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.8.9-200.fc18.x86_64 root=UUID=8d66d40a-4029-4e2b-98cd-509db8a8cb8a ro rd.md=0 rd.lvm=0 rd.dm=0 vconsole.font=latarcyrheb-sun16 vconsole.keymap=uk rd.luks=0 LANG=en_GB.UTF-8
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] __ex_table already sorted, skipping sort
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Memory: 4007848k/5234688k available (6526k kernel code, 1059660k absent, 167180k reserved, 6693k data, 1088k init)
>[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
>[    0.000000] NR_IRQS:8448 nr_irqs:712 16
>[    0.000000] Extended CMOS year: 2000
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] allocated 16777216 bytes of page_cgroup
>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.001000] tsc: Detected 3092.046 MHz processor
>[    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6184.09 BogoMIPS (lpj=3092046)
>[    0.000243] pid_max: default: 32768 minimum: 301
>[    0.000383] Security Framework initialized
>[    0.000507] SELinux:  Initializing.
>[    0.000632] SELinux:  Starting in permissive mode
>[    0.000909] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.001762] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.002173] Mount-cache hash table entries: 256
>[    0.002420] Initializing cgroup subsys cpuacct
>[    0.002540] Initializing cgroup subsys memory
>[    0.002666] Initializing cgroup subsys devices
>[    0.002799] Initializing cgroup subsys freezer
>[    0.002918] Initializing cgroup subsys net_cls
>[    0.003037] Initializing cgroup subsys blkio
>[    0.003156] Initializing cgroup subsys perf_event
>[    0.003294] CPU: Physical Processor ID: 0
>[    0.003413] CPU: Processor Core ID: 0
>[    0.003535] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.003535] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.003715] mce: CPU supports 7 MCE banks
>[    0.003849] CPU0: Thermal monitoring enabled (TM1)
>[    0.003972] process: using mwait in idle threads
>[    0.004092] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
>[    0.004092] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
>[    0.004092] tlb_flushall_shift: 5
>[    0.004445] Freeing SMP alternatives: 24k freed
>[    0.005654] ACPI: Core revision 20121018
>[    0.016152] ftrace: allocating 24339 entries in 96 pages
>[    0.026014] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.036132] smpboot: CPU0: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz (fam: 06, model: 2a, stepping: 07)
>[    0.036493] TSC deadline timer enabled
>[    0.036497] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
>[    0.036915] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
>[    0.037093] ... version:                3
>[    0.037213] ... bit width:              48
>[    0.037333] ... generic registers:      4
>[    0.037451] ... value mask:             0000ffffffffffff
>[    0.037572] ... max period:             000000007fffffff
>[    0.037690] ... fixed-purpose events:   3
>[    0.037808] ... event mask:             000000070000000f
>[    0.052197] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.038813] smpboot: Booting Node   0, Processors  #1 #2 #3 OK
>[    0.079185] Brought up 4 CPUs
>[    0.079305] smpboot: Total of 4 processors activated (24736.36 BogoMIPS)
>[    0.082014] devtmpfs: initialized
>[    0.082275] PM: Registering ACPI NVS region [mem 0xbf41d000-0xbf473fff] (356352 bytes)
>[    0.082456] PM: Registering ACPI NVS region [mem 0xbf5a7000-0xbf5b7fff] (69632 bytes)
>[    0.082631] PM: Registering ACPI NVS region [mem 0xbf5ce000-0xbf5cefff] (4096 bytes)
>[    0.082804] PM: Registering ACPI NVS region [mem 0xbf5d7000-0xbf5e0fff] (40960 bytes)
>[    0.082981] PM: Registering ACPI NVS region [mem 0xbf63d000-0xbf67ffff] (274432 bytes)
>[    0.083680] atomic64 test passed for x86-64 platform with CX8 and with SSE
>[    0.083822] RTC time: 19:32:03, date: 05/01/13
>[    0.083969] NET: Registered protocol family 16
>[    0.084199] ACPI: bus type pci registered
>[    0.084356] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
>[    0.084534] PCI: not using MMCONFIG
>[    0.086736] PCI: Using configuration type 1 for base access
>[    0.087417] bio: create slab <bio-0> at 0
>[    0.087586] ACPI: Added _OSI(Module Device)
>[    0.087705] ACPI: Added _OSI(Processor Device)
>[    0.087826] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.087946] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.088822] ACPI: EC: Look up EC in DSDT
>[    0.089690] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.091472] ACPI: SSDT 00000000bf5d7c18 0038C (v01    AMI      IST 00000001 MSFT 03000001)
>[    0.091987] ACPI: Dynamic OEM Table Load:
>[    0.092226] ACPI: SSDT           (null) 0038C (v01    AMI      IST 00000001 MSFT 03000001)
>[    0.092538] ACPI: SSDT 00000000bf5d8e18 00084 (v01    AMI      CST 00000001 MSFT 03000001)
>[    0.093016] ACPI: Dynamic OEM Table Load:
>[    0.093253] ACPI: SSDT           (null) 00084 (v01    AMI      CST 00000001 MSFT 03000001)
>[    0.093879] ACPI: Interpreter enabled
>[    0.094003] ACPI: (supports S0 S1 S3 S4 S5)
>[    0.094429] ACPI: Using IOAPIC for interrupt routing
>[    0.094562] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
>[    0.094774] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
>[    0.100253] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.103658] ACPI: No dock devices found.
>[    0.103779] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.104026] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>[    0.104147] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[    0.104353] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cffff])
>[    0.104534] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
>[    0.104728] PCI host bridge to bus 0000:00
>[    0.104847] pci_bus 0000:00: root bus resource [bus 00-ff]
>[    0.104968] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.105090] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.105210] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.105330] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
>[    0.105457] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
>[    0.105487] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
>[    0.105511] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.105551] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
>[    0.105573] pci 0000:00:16.0: reg 10: [mem 0xfe707000-0xfe70700f 64bit]
>[    0.105645] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.105676] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
>[    0.105696] pci 0000:00:1a.0: reg 10: [mem 0xfe706000-0xfe7063ff]
>[    0.105782] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.105807] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
>[    0.105821] pci 0000:00:1b.0: reg 10: [mem 0xfe700000-0xfe703fff 64bit]
>[    0.105886] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.105907] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
>[    0.105982] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.106006] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
>[    0.106080] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>[    0.106106] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
>[    0.106180] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.106204] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
>[    0.106278] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.106303] pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
>[    0.106379] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>[    0.106403] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
>[    0.106477] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
>[    0.106506] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
>[    0.106526] pci 0000:00:1d.0: reg 10: [mem 0xfe705000-0xfe7053ff]
>[    0.106612] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.106637] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
>[    0.106753] pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
>[    0.106767] pci 0000:00:1f.2: reg 10: [io  0xf0d0-0xf0d7]
>[    0.106774] pci 0000:00:1f.2: reg 14: [io  0xf0c0-0xf0c3]
>[    0.106782] pci 0000:00:1f.2: reg 18: [io  0xf0b0-0xf0b7]
>[    0.106789] pci 0000:00:1f.2: reg 1c: [io  0xf0a0-0xf0a3]
>[    0.106796] pci 0000:00:1f.2: reg 20: [io  0xf090-0xf09f]
>[    0.106803] pci 0000:00:1f.2: reg 24: [io  0xf080-0xf08f]
>[    0.106847] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
>[    0.106861] pci 0000:00:1f.3: reg 10: [mem 0xfe704000-0xfe7040ff 64bit]
>[    0.106881] pci 0000:00:1f.3: reg 20: [io  0xf000-0xf01f]
>[    0.106915] pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
>[    0.106929] pci 0000:00:1f.5: reg 10: [io  0xf070-0xf077]
>[    0.106936] pci 0000:00:1f.5: reg 14: [io  0xf060-0xf063]
>[    0.106944] pci 0000:00:1f.5: reg 18: [io  0xf050-0xf057]
>[    0.106951] pci 0000:00:1f.5: reg 1c: [io  0xf040-0xf043]
>[    0.106958] pci 0000:00:1f.5: reg 20: [io  0xf030-0xf03f]
>[    0.106966] pci 0000:00:1f.5: reg 24: [io  0xf020-0xf02f]
>[    0.107028] pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
>[    0.107041] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.107050] pci 0000:01:00.0: reg 18: [mem 0xfe620000-0xfe63ffff 64bit]
>[    0.107057] pci 0000:01:00.0: reg 20: [io  0xe000-0xe0ff]
>[    0.107069] pci 0000:01:00.0: reg 30: [mem 0xfe600000-0xfe61ffff pref]
>[    0.107102] pci 0000:01:00.0: supports D1 D2
>[    0.107122] pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
>[    0.107134] pci 0000:01:00.1: reg 10: [mem 0xfe640000-0xfe643fff 64bit]
>[    0.107191] pci 0000:01:00.1: supports D1 D2
>[    0.109110] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.109242] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>[    0.109244] pci 0000:00:01.0:   bridge window [mem 0xfe600000-0xfe6fffff]
>[    0.109247] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.109289] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.109457] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.109645] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
>[    0.109664] pci 0000:04:00.0: reg 10: [io  0xd000-0xd0ff]
>[    0.109697] pci 0000:04:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
>[    0.109719] pci 0000:04:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
>[    0.109808] pci 0000:04:00.0: supports D1 D2
>[    0.109809] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.111119] pci 0000:00:1c.2: PCI bridge to [bus 04]
>[    0.111252] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
>[    0.111260] pci 0000:00:1c.2:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
>[    0.111329] pci 0000:05:00.0: [1b21:1042] type 00 class 0x0c0330
>[    0.111357] pci 0000:05:00.0: reg 10: [mem 0xfe500000-0xfe507fff 64bit]
>[    0.111502] pci 0000:05:00.0: PME# supported from D3hot D3cold
>[    0.113120] pci 0000:00:1c.3: PCI bridge to [bus 05]
>[    0.113252] pci 0000:00:1c.3:   bridge window [mem 0xfe500000-0xfe5fffff]
>[    0.113312] pci 0000:06:00.0: [1b21:1080] type 01 class 0x060401
>[    0.113428] pci 0000:00:1c.4: PCI bridge to [bus 06-07] (subtractive decode)
>[    0.113554] pci 0000:00:1c.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.113557] pci 0000:00:1c.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.113559] pci 0000:00:1c.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.113560] pci 0000:00:1c.4:   bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
>[    0.113672] pci 0000:06:00.0: PCI bridge to [bus 07] (subtractive decode)
>[    0.113811] pci 0000:06:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
>[    0.113812] pci 0000:06:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
>[    0.113813] pci 0000:06:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
>[    0.113815] pci 0000:06:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
>[    0.113816] pci 0000:06:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.113817] pci 0000:06:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.113819] pci 0000:06:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.113820] pci 0000:06:00.0:   bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
>[    0.113872] pci 0000:00:1c.5: PCI bridge to [bus 08]
>[    0.114037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>[    0.114056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>[    0.114072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>[    0.114087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>[    0.114104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>[    0.114119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>[    0.114135] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4.BR16._PRT]
>[    0.114208]  pci0000:00: Requesting ACPI _OSC control (0x1d)
>[    0.114453]  pci0000:00: ACPI _OSC control (0x1c) granted
>[    0.115120] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>[    0.115985] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>[    0.116846] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    0.117649] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
>[    0.118454] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>[    0.119316] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
>[    0.120178] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>[    0.121048] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>[    0.121952] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.122132] vgaarb: loaded
>[    0.122249] vgaarb: bridge control possible 0000:01:00.0
>[    0.122412] SCSI subsystem initialized
>[    0.122531] ACPI: bus type scsi registered
>[    0.122679] libata version 3.00 loaded.
>[    0.122692] ACPI: bus type usb registered
>[    0.122820] usbcore: registered new interface driver usbfs
>[    0.122945] usbcore: registered new interface driver hub
>[    0.123079] usbcore: registered new device driver usb
>[    0.123230] PCI: Using ACPI for IRQ routing
>[    0.124701] PCI: pci_cache_line_size set to 64 bytes
>[    0.124759] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
>[    0.124761] e820: reserve RAM buffer [mem 0xbf41d000-0xbfffffff]
>[    0.124762] e820: reserve RAM buffer [mem 0xbf5ce000-0xbfffffff]
>[    0.124763] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
>[    0.124764] e820: reserve RAM buffer [mem 0x13f800000-0x13fffffff]
>[    0.124823] NetLabel: Initializing
>[    0.124943] NetLabel:  domain hash size = 128
>[    0.125060] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.125187] NetLabel:  unlabeled traffic allowed by default
>[    0.125342] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.126006] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.128135] Switching to clocksource hpet
>[    0.131889] pnp: PnP ACPI init
>[    0.132017] ACPI: bus type pnp registered
>[    0.132226] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
>[    0.132354] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
>[    0.132474] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.132592] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.132713] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
>[    0.132833] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.132892] system 00:01: [io  0x0290-0x029f] has been reserved
>[    0.133011] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.133219] pnp 00:02: [dma 0 disabled]
>[    0.133297] pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
>[    0.133305] pnp 00:03: [dma 4]
>[    0.133316] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.133333] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.133347] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
>[    0.133375] system 00:06: [io  0x04d0-0x04d1] has been reserved
>[    0.133495] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.133513] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.133664] pnp 00:08: [dma 0 disabled]
>[    0.133696] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.133725] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
>[    0.133841] system 00:0a: [io  0x0400-0x0453] has been reserved
>[    0.133960] system 00:0a: [io  0x0458-0x047f] has been reserved
>[    0.134080] system 00:0a: [io  0x0500-0x057f] has been reserved
>[    0.134199] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.134324] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
>[    0.134445] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
>[    0.134565] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
>[    0.134682] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.134720] system 00:0b: [io  0x0454-0x0457] has been reserved
>[    0.134838] system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.134917] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.135016] pnp: PnP ACPI: found 13 devices
>[    0.135134] ACPI: ACPI bus type pnp unregistered
>[    0.141301] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.141423] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
>[    0.141545] pci 0000:00:01.0:   bridge window [mem 0xfe600000-0xfe6fffff]
>[    0.141667] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.141847] pci 0000:00:1c.0: PCI bridge to [bus 02]
>[    0.141974] pci 0000:00:1c.1: PCI bridge to [bus 03]
>[    0.142101] pci 0000:00:1c.2: PCI bridge to [bus 04]
>[    0.142222] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
>[    0.142352] pci 0000:00:1c.2:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
>[    0.142535] pci 0000:00:1c.3: PCI bridge to [bus 05]
>[    0.142657] pci 0000:00:1c.3:   bridge window [mem 0xfe500000-0xfe5fffff]
>[    0.142783] pci 0000:06:00.0: PCI bridge to [bus 07]
>[    0.142921] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
>[    0.143049] pci 0000:00:1c.5: PCI bridge to [bus 08]
>[    0.143218] pci 0000:06:00.0: setting latency timer to 64
>[    0.143226] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.143227] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.143229] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.143230] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
>[    0.143232] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
>[    0.143233] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
>[    0.143235] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.143236] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
>[    0.143237] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
>[    0.143239] pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe5fffff]
>[    0.143240] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7]
>[    0.143242] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff]
>[    0.143243] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.143244] pci_bus 0000:06: resource 7 [mem 0xc0000000-0xffffffff]
>[    0.143246] pci_bus 0000:07: resource 8 [io  0x0000-0x0cf7]
>[    0.143247] pci_bus 0000:07: resource 9 [io  0x0d00-0xffff]
>[    0.143248] pci_bus 0000:07: resource 10 [mem 0x000a0000-0x000bffff]
>[    0.143250] pci_bus 0000:07: resource 11 [mem 0xc0000000-0xffffffff]
>[    0.143281] NET: Registered protocol family 2
>[    0.143518] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.143783] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.143959] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.144093] TCP: reno registered
>[    0.144213] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.144351] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.144514] NET: Registered protocol family 1
>[    0.391178] pci 0000:01:00.0: Boot video device
>[    0.391243] PCI: CLS 64 bytes, default 64
>[    0.391273] Unpacking initramfs...
>[    0.634299] Freeing initrd memory: 19104k freed
>[    0.636519] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.636644] software IO TLB [mem 0xbb41d000-0xbf41d000] (64MB) mapped at [ffff8800bb41d000-ffff8800bf41cfff]
>[    0.637321] Initialise module verification
>[    0.637467] audit: initializing netlink socket (disabled)
>[    0.637597] type=2000 audit(1367436723.616:1): initialized
>[    0.655977] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.657031] VFS: Disk quotas dquot_6.5.2
>[    0.657179] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.657567] msgmni has been set to 7865
>[    0.657723] SELinux:  Registering netfilter hooks
>[    0.658135] alg: No test for stdrng (krng)
>[    0.658259] NET: Registered protocol family 38
>[    0.658383] Key type asymmetric registered
>[    0.658501] Asymmetric key parser 'x509' registered
>[    0.658642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    0.658837] io scheduler noop registered
>[    0.658957] io scheduler deadline registered
>[    0.659096] io scheduler cfq registered (default)
>[    0.659296] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>[    0.659370] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
>[    0.659456] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
>[    0.659546] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
>[    0.659633] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
>[    0.659720] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
>[    0.659783] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
>[    0.659904] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
>[    0.660034] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
>[    0.660157] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
>[    0.660171] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
>[    0.660294] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
>[    0.660309] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
>[    0.660431] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
>[    0.660445] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
>[    0.660561] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
>[    0.660682] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
>[    0.660695] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
>[    0.660815] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
>[    0.660937] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
>[    0.660951] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
>[    0.661088] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
>[    0.661095] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.661221] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>[    0.661339] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>[    0.661657] intel_idle: MWAIT substates: 0x1120
>[    0.661659] intel_idle: v0.4 model 0x2A
>[    0.661660] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.661705] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>[    0.661882] ACPI: Power Button [PWRB]
>[    0.662036] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>[    0.662210] ACPI: Power Button [PWRF]
>[    0.662419] ACPI: Requesting acpi_cpufreq
>[    0.665229] GHES: HEST is not enabled!
>[    0.665393] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.686074] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[    0.686483] Non-volatile memory driver v1.3
>[    0.686604] Linux agpgart interface v0.103
>[    0.687157] loop: module loaded
>[    0.687320] ata_piix 0000:00:1f.2: version 2.13
>[    0.687336] ata_piix 0000:00:1f.2: MAP [
>[    0.687454]  P0 P2 P1 P3 ]
>[    0.837965] ata_piix 0000:00:1f.2: setting latency timer to 64
>[    0.838131] scsi0 : ata_piix
>[    0.838598] scsi1 : ata_piix
>[    0.838969] ata1: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf090 irq 20
>[    0.839093] ata2: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf098 irq 20
>[    0.839226] ata_piix 0000:00:1f.5: MAP [
>[    0.839377]  P0 -- P1 -- ]
>[    0.989898] ata_piix 0000:00:1f.5: setting latency timer to 64
>[    0.990029] scsi2 : ata_piix
>[    0.990459] scsi3 : ata_piix
>[    0.990817] ata3: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf030 irq 20
>[    0.990944] ata4: SATA max UDMA/133 cmd 0xf050 ctl 0xf040 bmdma 0xf038 irq 20
>[    0.991098] libphy: Fixed MDIO Bus: probed
>[    0.991295] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.993609] ehci-pci: EHCI PCI platform driver
>[    0.993754] ehci-pci 0000:00:1a.0: setting latency timer to 64
>[    0.993757] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    0.993910] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    0.994099] ehci-pci 0000:00:1a.0: debug port 2
>[    0.998122] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    0.998134] ehci-pci 0000:00:1a.0: irq 23, io mem 0xfe706000
>[    1.003865] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    1.004018] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.004139] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.004316] usb usb1: Product: EHCI Host Controller
>[    1.004435] usb usb1: Manufacturer: Linux 3.8.9-200.fc18.x86_64 ehci_hcd
>[    1.004557] usb usb1: SerialNumber: 0000:00:1a.0
>[    1.004738] hub 1-0:1.0: USB hub found
>[    1.004868] hub 1-0:1.0: 2 ports detected
>[    1.005051] ehci-pci 0000:00:1d.0: setting latency timer to 64
>[    1.005054] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    1.005197] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    1.005386] ehci-pci 0000:00:1d.0: debug port 2
>[    1.009409] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    1.009412] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe705000
>[    1.014860] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    1.015006] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.015124] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.015300] usb usb2: Product: EHCI Host Controller
>[    1.015419] usb usb2: Manufacturer: Linux 3.8.9-200.fc18.x86_64 ehci_hcd
>[    1.015538] usb usb2: SerialNumber: 0000:00:1d.0
>[    1.015709] hub 2-0:1.0: USB hub found
>[    1.015828] hub 2-0:1.0: 2 ports detected
>[    1.015999] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.016122] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.016270] xhci_hcd 0000:05:00.0: xHCI Host Controller
>[    1.016416] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
>[    1.023585] xhci_hcd 0000:05:00.0: irq 46 for MSI/MSI-X
>[    1.023589] xhci_hcd 0000:05:00.0: irq 47 for MSI/MSI-X
>[    1.023592] xhci_hcd 0000:05:00.0: irq 48 for MSI/MSI-X
>[    1.023595] xhci_hcd 0000:05:00.0: irq 49 for MSI/MSI-X
>[    1.023598] xhci_hcd 0000:05:00.0: irq 50 for MSI/MSI-X
>[    1.023681] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.023802] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.023985] usb usb3: Product: xHCI Host Controller
>[    1.024105] usb usb3: Manufacturer: Linux 3.8.9-200.fc18.x86_64 xhci_hcd
>[    1.024225] usb usb3: SerialNumber: 0000:05:00.0
>[    1.024384] xHCI xhci_add_endpoint called for root hub
>[    1.024385] xHCI xhci_check_bandwidth called for root hub
>[    1.024397] hub 3-0:1.0: USB hub found
>[    1.024522] hub 3-0:1.0: 2 ports detected
>[    1.024681] xhci_hcd 0000:05:00.0: xHCI Host Controller
>[    1.024824] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
>[    1.028766] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.028895] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.029069] usb usb4: Product: xHCI Host Controller
>[    1.029185] usb usb4: Manufacturer: Linux 3.8.9-200.fc18.x86_64 xhci_hcd
>[    1.029304] usb usb4: SerialNumber: 0000:05:00.0
>[    1.029454] xHCI xhci_add_endpoint called for root hub
>[    1.029455] xHCI xhci_check_bandwidth called for root hub
>[    1.029467] hub 4-0:1.0: USB hub found
>[    1.029588] hub 4-0:1.0: 2 ports detected
>[    1.034881] usbcore: registered new interface driver usbserial
>[    1.035013] usbcore: registered new interface driver usbserial_generic
>[    1.035135] usbserial: USB Serial support registered for generic
>[    1.035272] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    1.035391] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    1.036269] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.036429] mousedev: PS/2 mouse device common for all mice
>[    1.036648] rtc_cmos 00:04: RTC can wake from S4
>[    1.036884] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>[    1.037028] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
>[    1.037203] device-mapper: uevent: version 1.0.3
>[    1.037359] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
>[    1.037594] cpuidle: using governor ladder
>[    1.037762] cpuidle: using governor menu
>[    1.038080] EFI Variables Facility v0.08 2004-May-17
>[    1.038256] usbcore: registered new interface driver usbhid
>[    1.038381] usbhid: USB HID core driver
>[    1.038513] drop_monitor: Initializing network drop monitor service
>[    1.038689] ip_tables: (C) 2000-2006 Netfilter Core Team
>[    1.038830] TCP: cubic registered
>[    1.038969] Initializing XFRM netlink socket
>[    1.039167] NET: Registered protocol family 10
>[    1.039395] mip6: Mobile IPv6
>[    1.039514] NET: Registered protocol family 17
>[    1.039841] PM: Hibernation image not present or could not be loaded.
>[    1.039842] Loading module verification certificates
>[    1.040657] MODSIGN: Loaded cert 'Fedora kernel signing key: 29eac2c9c7733742677657744868d31761ff96ec'
>[    1.040848] registered taskstats version 1
>[    1.041452]   Magic number: 13:560:545
>[    1.041636] rtc_cmos 00:04: setting system clock to 2013-05-01 19:32:04 UTC (1367436724)
>[    1.063143] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>[    1.306796] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    1.421144] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.421277] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.421644] hub 1-1:1.0: USB hub found
>[    1.421882] hub 1-1:1.0: 4 ports detected
>[    1.446741] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    1.449886] ata3.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB01, max UDMA/100
>[    1.455889] ata3.00: configured for UDMA/100
>[    1.524695] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.637615] tsc: Refined TSC clocksource calibration: 3092.202 MHz
>[    1.637749] Switching to clocksource tsc
>[    1.638913] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
>[    1.639046] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.639440] hub 2-1:1.0: USB hub found
>[    1.639632] hub 2-1:1.0: 6 ports detected
>[    1.713777] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
>[    1.801380] usb 1-1.2: New USB device found, idVendor=1241, idProduct=1166
>[    1.801526] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.810925] input: HID 1241:1166 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input3
>[    1.811465] hid-generic 0003:1241:1166.0001: input,hidraw0: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:1a.0-1.2/input0
>[    1.845532] ata2.00: failed to resume link (SControl 0)
>[    1.914682] usb 2-1.4: new full-speed USB device number 3 using ehci-pci
>[    1.997432] ata4: failed to resume link (SControl 0)
>[    2.008865] ata4: SATA link down (SStatus 4 SControl 0)
>[    2.150390] ata1.01: failed to resume link (SControl 0)
>[    2.301380] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    2.301520] ata1.01: SATA link down (SStatus 0 SControl 0)
>[    2.304901] ata1.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
>[    2.305030] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
>[    2.311894] ata1.00: configured for UDMA/133
>[    2.312255] scsi 0:0:0:0: Direct-Access     ATA      ST500DM002-1BD14 KC45 PQ: 0 ANSI: 5
>[    2.312672] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>[    2.312686] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    2.312987] sd 0:0:0:0: [sda] 4096-byte physical blocks
>[    2.313158] sd 0:0:0:0: [sda] Write Protect is off
>[    2.313314] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.313346] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.356115]  sda: sda1 sda2 sda3 sda4 sda5 sda6
>[    2.356872] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.852065] ata2.01: failed to resume link (SControl 0)
>[    2.863449] ata2.00: SATA link down (SStatus 4 SControl 0)
>[    2.863586] ata2.01: SATA link down (SStatus 0 SControl 0)
>[    2.864519] scsi 2:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-222AB  SB01 PQ: 0 ANSI: 5
>[    2.867101] sr0: scsi3-mmc drive: 32x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>[    2.867289] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    2.867599] sr 2:0:0:0: Attached scsi CD-ROM sr0
>[    2.867698] sr 2:0:0:0: Attached scsi generic sg1 type 5
>[    2.870235] Freeing unused kernel memory: 1088k freed
>[    2.870554] Write protecting the kernel read-only data: 12288k
>[    2.876892] Freeing unused kernel memory: 1656k freed
>[    2.882199] Freeing unused kernel memory: 1344k freed
>[    2.940033] systemd[1]: systemd 197 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    2.940363] systemd[1]: Running in initial RAM disk.
>[    2.941235] systemd[1]: No hostname configured.
>[    2.941364] systemd[1]: Set hostname to <localhost>.
>[    2.941608] systemd[1]: Initializing machine ID from random generator.
>[    2.959221] systemd[1]: Starting Encrypted Volumes.
>[    2.959861] systemd[1]: Reached target Encrypted Volumes.
>[    2.960088] systemd[1]: Starting udev Kernel Socket.
>[    2.960720] systemd[1]: Listening on udev Kernel Socket.
>[    2.960914] systemd[1]: Starting udev Control Socket.
>[    2.961570] systemd[1]: Listening on udev Control Socket.
>[    2.961707] systemd[1]: Starting Journal Socket.
>[    2.962370] systemd[1]: Listening on Journal Socket.
>[    2.962511] systemd[1]: Starting dracut cmdline hook...
>[    2.980265] systemd[1]: Started Load Kernel Modules.
>[    2.980405] systemd[1]: Starting Journal Service...
>[    2.997613] systemd[1]: Started Journal Service.
>[    2.997950] systemd[1]: Starting Sockets.
>[    2.998551] systemd[1]: Reached target Sockets.
>[    2.998688] systemd[1]: Starting Swap.
>[    2.999327] systemd[1]: Reached target Swap.
>[    2.999464] systemd[1]: Starting Local File Systems.
>[    3.002228] systemd[1]: Reached target Local File Systems.
>[    3.111290] systemd-udevd[124]: starting version 197
>[    3.259349] wmi: Mapper loaded
>[    3.269204] [drm] Initialized drm 1.1.0 20060810
>[    3.293718] [drm] radeon defaulting to kernel modesetting.
>[    3.293849] [drm] radeon kernel modesetting enabled.
>[    3.294160] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1043:0x03DA).
>[    3.294388] [drm] register mmio base: 0xFE620000
>[    3.294511] [drm] register mmio size: 131072
>[    3.295047] ATOM BIOS: 6779.13.12.0.0.AS06
>[    3.295526] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
>[    3.295720] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
>[    3.297764] [drm] Detected VRAM RAM=1024M, BAR=256M
>[    3.297886] [drm] RAM width 64bits DDR
>[    3.298067] [TTM] Zone  kernel: Available graphics memory: 2015532 kiB
>[    3.298200] [TTM] Initializing pool allocator
>[    3.298318] [TTM] Initializing DMA pool allocator
>[    3.298449] [drm] radeon: 1024M of VRAM memory ready
>[    3.298566] [drm] radeon: 512M of GTT memory ready.
>[    3.298692] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    3.298816] [drm] Driver supports precise vblank timestamp query.
>[    3.298977] radeon 0000:01:00.0: irq 51 for MSI/MSI-X
>[    3.298987] radeon 0000:01:00.0: radeon: using MSI.
>[    3.299133] [drm] radeon: irq initialized.
>[    3.299252] [drm] GART: num cpu pages 131072, num gpu pages 131072
>[    3.299716] [drm] probing gen 2 caps for device 8086:101 = 2/0
>[    3.299852] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[    3.300102] [drm] Loading CAICOS Microcode
>[    3.326218] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[    3.326471] radeon 0000:01:00.0: WB enabled
>[    3.326602] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880134ba5c00
>[    3.326803] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880134ba5c0c
>[    3.343605] [drm] ring test on 0 succeeded in 3 usecs
>[    3.343780] [drm] ring test on 3 succeeded in 1 usecs
>[    3.344103] [drm] ib test on ring 0 succeeded in 0 usecs
>[    3.344255] [drm] ib test on ring 3 succeeded in 0 usecs
>[    3.344520] [drm] Radeon Display Connectors
>[    3.344630] [drm] Connector 0:
>[    3.344738] [drm]   HDMI-A-1
>[    3.344855] [drm]   HPD1
>[    3.344965] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
>[    3.345134] [drm]   Encoders:
>[    3.345244] [drm]     DFP1: INTERNAL_UNIPHY1
>[    3.345351] [drm] Connector 1:
>[    3.345458] [drm]   DVI-D-1
>[    3.345565] [drm]   HPD4
>[    3.345675] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
>[    3.345845] [drm]   Encoders:
>[    3.345957] [drm]     DFP2: INTERNAL_UNIPHY
>[    3.346068] [drm] Connector 2:
>[    3.346180] [drm]   VGA-1
>[    3.346292] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
>[    3.346464] [drm]   Encoders:
>[    3.346575] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[    3.346776] [drm] Internal thermal controller without fan control
>[    3.347770] [drm] radeon: power management initialized
>[    3.397395] [drm] fb mappable at 0xC0142000
>[    3.397464] [drm] vram apper at 0xC0000000
>[    3.397527] [drm] size 5242880
>[    3.397590] [drm] fb depth is 24
>[    3.397654] [drm]    pitch is 5120
>[    3.397766] fbcon: radeondrmfb (fb0) is primary device
>[    3.623549] Console: switching to colour frame buffer device 160x64
>[    3.626089] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
>[    3.626090] radeon 0000:01:00.0: registered panic notifier
>[    3.626095] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
>[    3.919278] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    4.058408] usb 2-1.4: New USB device found, idVendor=046d, idProduct=08b3
>[    4.058476] usb 2-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    4.132645] usb 2-1.6: new full-speed USB device number 4 using ehci-pci
>[    4.219407] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=4500
>[    4.219450] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    4.219485] usb 2-1.6: Product: BCM2046B1
>[    4.219497] usb 2-1.6: Manufacturer: Broadcom
>[    4.219839] hub 2-1.6:1.0: USB hub found
>[    4.220031] hub 2-1.6:1.0: 3 ports detected
>[    4.220639] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
>[    4.483490] usb 2-1.6.1: new full-speed USB device number 5 using ehci-pci
>[    4.490961] systemd-journald[74]: Received SIGTERM
>[    4.560752] usb 2-1.6.1: New USB device found, idVendor=0a5c, idProduct=4502
>[    4.560800] usb 2-1.6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    4.562552] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.1/2-1.6.1:1.0/input/input4
>[    4.562765] hid-generic 0003:0A5C:4502.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:1d.0-1.6.1/input0
>[    4.635400] usb 2-1.6.2: new full-speed USB device number 6 using ehci-pci
>[    4.712429] usb 2-1.6.2: New USB device found, idVendor=0a5c, idProduct=4503
>[    4.712477] usb 2-1.6.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    4.715095] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6.2/2-1.6.2:1.0/input/input5
>[    4.715306] hid-generic 0003:0A5C:4503.0003: input,hidraw2: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:1d.0-1.6.2/input0
>[    4.777315] usb 2-1.6.3: new full-speed USB device number 7 using ehci-pci
>[    4.855234] usb 2-1.6.3: New USB device found, idVendor=050d, idProduct=016a
>[    4.855282] usb 2-1.6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    4.855314] usb 2-1.6.3: Product: BLUETOOTH USB +EDR ADAPTER v2.1 UHE
>[    4.855341] usb 2-1.6.3: Manufacturer: Broadcom Corp
>[    4.855363] usb 2-1.6.3: SerialNumber: 000A3A8376DA
>[    5.159028] SELinux:  Disabled at runtime.
>[    5.159071] SELinux:  Unregistering netfilter hooks
>[    5.188932] type=1404 audit(1367436728.648:2): selinux=0 auid=4294967295 ses=4294967295
>[    6.623187] systemd-readahead[275]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
>[    7.387401] EXT4-fs (sda3): re-mounted. Opts: (null)
>[    7.431885] systemd-udevd[284]: starting version 197
>[    9.530009] RPC: Registered named UNIX socket transport module.
>[    9.531367] RPC: Registered udp transport module.
>[    9.532723] RPC: Registered tcp transport module.
>[    9.533698] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    9.649609] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[   10.357507] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x1a
>[   11.241047] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
>[   11.242217] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x1a
>[   11.243267] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
>[   11.244047] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x1a
>[   11.245397] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
>[   11.246492] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x1a
>[   11.247511] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
>[   11.248329] perf_event_intel: PEBS enabled due to microcode update
>[   11.249163] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[   11.305861] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20121018/utaddress-251)
>[   11.307272] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   11.308575] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20121018/utaddress-251)
>[   11.309930] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   11.311404] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPBX 1 (20121018/utaddress-251)
>[   11.312252] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_GPE.GPIO 2 (20121018/utaddress-251)
>[   11.313101] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   11.313943] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[   11.353501] iTCO_vendor_support: vendor-support=0
>[   11.355921] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[   11.356837] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
>[   11.357771] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[   11.441705] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[   11.443109] r8169 0000:04:00.0: irq 52 for MSI/MSI-X
>[   11.443284] r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0xffffc900047bc000, 54:04:a6:ef:18:40, XID 0c900800 IRQ 52
>[   11.444431] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>[   11.452096] parport_pc 00:02: reported by Plug and Play ACPI
>[   11.453145] parport0: PC-style at 0x378, irq 5 [PCSPP]
>[   11.569666] asus_wmi: ASUS WMI generic driver loaded
>[   11.575854] asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9
>[   11.576825] asus_wmi: SFUN value: 0x0<6>[   11.578002] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
>[   11.579567] asus_wmi: Disabling ACPI video driver
>[   11.730276] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>[   11.731868] mei 0000:00:16.0: setting latency timer to 64
>[   11.731917] mei 0000:00:16.0: irq 53 for MSI/MSI-X
>[   11.935544] ppdev: user-space parallel port driver
>[   12.120874] Bluetooth: Core ver 2.16
>[   12.121838] NET: Registered protocol family 31
>[   12.122803] Bluetooth: HCI device and connection manager initialized
>[   12.123761] Bluetooth: HCI socket layer initialized
>[   12.125243] Bluetooth: L2CAP socket layer initialized
>[   12.126221] Bluetooth: SCO socket layer initialized
>[   12.184243] usbcore: registered new interface driver btusb
>[   12.200281] usb 2-1.6.1: input irq status -75 received
>[   12.224267] usb 2-1.6.1: input irq status -75 received
>[   12.240446] snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
>[   12.248255] usb 2-1.6.1: input irq status -75 received
>[   12.251908] media: Linux media interface: v0.10
>[   12.272245] usb 2-1.6.1: input irq status -75 received
>[   12.274162] Linux video capture interface: v2.00
>[   12.296232] usb 2-1.6.1: input irq status -75 received
>[   12.313137] ALSA sound/pci/hda/patch_realtek.c:1241 SKU: Nid=0x1d sku_cfg=0x4004c601
>[   12.313140] ALSA sound/pci/hda/patch_realtek.c:1243 SKU: port_connectivity=0x1
>[   12.313141] ALSA sound/pci/hda/patch_realtek.c:1244 SKU: enable_pcbeep=0x0
>[   12.313142] ALSA sound/pci/hda/patch_realtek.c:1245 SKU: check_sum=0x00000004
>[   12.313143] ALSA sound/pci/hda/patch_realtek.c:1246 SKU: customization=0x000000c6
>[   12.313144] ALSA sound/pci/hda/patch_realtek.c:1247 SKU: external_amp=0x0
>[   12.313145] ALSA sound/pci/hda/patch_realtek.c:1248 SKU: platform_type=0x0
>[   12.313146] ALSA sound/pci/hda/patch_realtek.c:1249 SKU: swap=0x0
>[   12.313147] ALSA sound/pci/hda/patch_realtek.c:1250 SKU: override=0x1
>[   12.313151] ALSA sound/pci/hda/hda_auto_parser.c:306 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
>[   12.313152] ALSA sound/pci/hda/hda_auto_parser.c:310    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   12.313154] ALSA sound/pci/hda/hda_auto_parser.c:314    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
>[   12.313155] ALSA sound/pci/hda/hda_auto_parser.c:315    mono: mono_out=0x0
>[   12.313156] ALSA sound/pci/hda/hda_auto_parser.c:318    dig-out=0x11/0x0
>[   12.313157] ALSA sound/pci/hda/hda_auto_parser.c:319    inputs:
>[   12.313159] ALSA sound/pci/hda/hda_auto_parser.c:323      Front Mic=0x19
>[   12.313160] ALSA sound/pci/hda/hda_auto_parser.c:323      Rear Mic=0x18
>[   12.313161] ALSA sound/pci/hda/hda_auto_parser.c:323      Line=0x1a
>[   12.315171] ALSA sound/pci/hda/patch_realtek.c:1304 realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d
>[   12.315172] ALSA sound/pci/hda/patch_realtek.c:1320 realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0887
>[   12.322260] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>[   12.323329] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>[   12.324367] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>[   12.325426] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
>[   12.327117] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>[   12.328456] ALSA sound/pci/hda/hda_intel.c:2848 0000:01:00.1: Handle VGA-switcheroo audio client
>[   12.329470] ALSA sound/pci/hda/hda_intel.c:3040 0000:01:00.1: Using LPIB position fix
>[   12.329537] snd_hda_intel 0000:01:00.1: irq 55 for MSI/MSI-X
>[   12.331791] ALSA sound/pci/hda/hda_intel.c:1716 0000:01:00.1: Enable sync_write for stable communication
>[   12.402335] pwc: Logitech QuickCam Zoom USB webcam detected.
>[   12.465000] kvm: disabled by bios
>[   12.470960] kvm: disabled by bios
>[   12.476882] kvm: disabled by bios
>[   12.496286] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
>[   12.581593] pwc: Registered as video0.
>[   12.583273] input: PWC snapshot button as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/input/input13
>[   12.585485] usbcore: registered new interface driver Philips webcam
>[   12.590506] systemd-udevd[349]: renamed network interface eth0 to p2p1
>[   13.642628] ALSA sound/usb/mixer.c:931 2:1: cannot get min/max values for control 2 (id 2)
>[   13.643848] usbcore: registered new interface driver snd-usb-audio
>[   14.101438] Adding 6143996k swap on /dev/sda4.  Priority:-1 extents:1 across:6143996k 
>[   19.841717] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[   20.272480] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
>[   20.809962] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
>[   20.946733] systemd-journald[300]: Received SIGUSR1
>[   21.845233] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   21.846960] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[   23.828172] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
>[   23.828745] Bluetooth: BNEP filters: protocol multicast
>[   23.829321] Bluetooth: BNEP socket layer initialized
>[   23.856210] Bluetooth: RFCOMM TTY layer initialized
>[   23.857374] Bluetooth: RFCOMM socket layer initialized
>[   23.858480] Bluetooth: RFCOMM ver 1.11
>[   24.317514] input: PC Speaker as /devices/platform/pcspkr/input/input14
>[   24.555953] r8169 0000:04:00.0 p2p1: link down
>[   24.555974] r8169 0000:04:00.0 p2p1: link down
>[   24.556006] IPv6: ADDRCONF(NETDEV_UP): p2p1: link is not ready
>[   24.695214] NFSD: starting 90-second grace period (net ffffffff81ca8280)
>[   26.157702] r8169 0000:04:00.0 p2p1: link up
>[   26.157713] IPv6: ADDRCONF(NETDEV_CHANGE): p2p1: link becomes ready
>[   39.595607] fuse init (API version 7.20)
>[   54.311830] ISO 9660 Extensions: Microsoft Joliet Level 3
>[   54.333585] ISOFS: changing to secondary root
>[ 1724.567087] radeon 0000:01:00.0: GPU lockup CP stall for more than 10000msec
>[ 1724.567094] radeon 0000:01:00.0: GPU lockup (waiting for 0x000000000002b4ac last fence id 0x000000000002b4aa)
>[ 1724.568156] radeon 0000:01:00.0: Saved 151 dwords of commands on ring 0.
>[ 1724.568163] radeon 0000:01:00.0: GPU softreset: 0x00000003
>[ 1724.577702] radeon 0000:01:00.0:   GRBM_STATUS               = 0xE7730828
>[ 1724.577706] radeon 0000:01:00.0:   GRBM_STATUS_SE0           = 0xFC000001
>[ 1724.577709] radeon 0000:01:00.0:   GRBM_STATUS_SE1           = 0x00000007
>[ 1724.577711] radeon 0000:01:00.0:   SRBM_STATUS               = 0x200000C0
>[ 1724.577714] radeon 0000:01:00.0:   R_008674_CP_STALLED_STAT1 = 0x00000000
>[ 1724.577717] radeon 0000:01:00.0:   R_008678_CP_STALLED_STAT2 = 0x00010800
>[ 1724.577719] radeon 0000:01:00.0:   R_00867C_CP_BUSY_STAT     = 0x00028004
>[ 1724.577722] radeon 0000:01:00.0:   R_008680_CP_STAT          = 0x80038647
>[ 1724.577724] radeon 0000:01:00.0:   GRBM_SOFT_RESET=0x00007F6B
>[ 1724.577778] radeon 0000:01:00.0:   GRBM_STATUS               = 0x00003828
>[ 1724.577780] radeon 0000:01:00.0:   GRBM_STATUS_SE0           = 0x00000007
>[ 1724.577783] radeon 0000:01:00.0:   GRBM_STATUS_SE1           = 0x00000007
>[ 1724.577786] radeon 0000:01:00.0:   SRBM_STATUS               = 0x200000C0
>[ 1724.577788] radeon 0000:01:00.0:   R_008674_CP_STALLED_STAT1 = 0x00000000
>[ 1724.577791] radeon 0000:01:00.0:   R_008678_CP_STALLED_STAT2 = 0x00000000
>[ 1724.577793] radeon 0000:01:00.0:   R_00867C_CP_BUSY_STAT     = 0x00000000
>[ 1724.577796] radeon 0000:01:00.0:   R_008680_CP_STAT          = 0x00000000
>[ 1724.595250] radeon 0000:01:00.0: GPU reset succeeded, trying to resume
>[ 1724.613641] [drm] probing gen 2 caps for device 8086:101 = 2/0
>[ 1724.613646] [drm] PCIE gen 2 link speeds already enabled
>[ 1724.617195] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[ 1724.617327] radeon 0000:01:00.0: WB enabled
>[ 1724.617330] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880134ba5c00
>[ 1724.617331] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880134ba5c0c
>[ 1724.633728] [drm] ring test on 0 succeeded in 2 usecs
>[ 1724.633914] [drm] ring test on 3 succeeded in 1 usecs
>[ 1724.649831] [drm] ib test on ring 0 succeeded in 0 usecs
>[ 1724.649883] [drm] ib test on ring 3 succeeded in 0 usecs
>[ 1735.808716] radeon 0000:01:00.0: GPU lockup CP stall for more than 10000msec
>[ 1735.808722] radeon 0000:01:00.0: GPU lockup (waiting for 0x000000000002b4da last fence id 0x000000000002b4d8)
>[ 1735.809779] radeon 0000:01:00.0: Saved 311 dwords of commands on ring 0.
>[ 1735.809786] radeon 0000:01:00.0: GPU softreset: 0x00000003
>[ 1735.825741] radeon 0000:01:00.0:   GRBM_STATUS               = 0xE7730828
>[ 1735.825744] radeon 0000:01:00.0:   GRBM_STATUS_SE0           = 0xFC000001
>[ 1735.825745] radeon 0000:01:00.0:   GRBM_STATUS_SE1           = 0x00000007
>[ 1735.825747] radeon 0000:01:00.0:   SRBM_STATUS               = 0x200000C0
>[ 1735.825748] radeon 0000:01:00.0:   R_008674_CP_STALLED_STAT1 = 0x00000000
>[ 1735.825750] radeon 0000:01:00.0:   R_008678_CP_STALLED_STAT2 = 0x00010800
>[ 1735.825751] radeon 0000:01:00.0:   R_00867C_CP_BUSY_STAT     = 0x00028006
>[ 1735.825753] radeon 0000:01:00.0:   R_008680_CP_STAT          = 0x80038647
>[ 1735.825754] radeon 0000:01:00.0:   GRBM_SOFT_RESET=0x00007F6B
>[ 1735.825806] radeon 0000:01:00.0:   GRBM_STATUS               = 0x00003828
>[ 1735.825808] radeon 0000:01:00.0:   GRBM_STATUS_SE0           = 0x00000007
>[ 1735.825809] radeon 0000:01:00.0:   GRBM_STATUS_SE1           = 0x00000007
>[ 1735.825811] radeon 0000:01:00.0:   SRBM_STATUS               = 0x200000C0
>[ 1735.825812] radeon 0000:01:00.0:   R_008674_CP_STALLED_STAT1 = 0x00000000
>[ 1735.825814] radeon 0000:01:00.0:   R_008678_CP_STALLED_STAT2 = 0x00000000
>[ 1735.825815] radeon 0000:01:00.0:   R_00867C_CP_BUSY_STAT     = 0x00000000
>[ 1735.825817] radeon 0000:01:00.0:   R_008680_CP_STAT          = 0x00000000
>[ 1735.843289] radeon 0000:01:00.0: GPU reset succeeded, trying to resume
>[ 1735.861777] [drm] probing gen 2 caps for device 8086:101 = 2/0
>[ 1735.861782] [drm] PCIE gen 2 link speeds already enabled
>[ 1735.865502] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
>[ 1735.865639] radeon 0000:01:00.0: WB enabled
>[ 1735.865641] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880134ba5c00
>[ 1735.865642] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880134ba5c0c
>[ 1735.882043] [drm] ring test on 0 succeeded in 1 usecs
>[ 1736.225742] [drm:r600_dma_ring_test] *ERROR* radeon: ring 3 test failed (0xCAFEDEAD)
>[ 1736.225745] [drm:evergreen_resume] *ERROR* evergreen startup failed on resume
>[ 1736.647165] [drm] ib test on ring 0 succeeded in 0 usecs

Actions: View

Attachments on bug 61747: 75852 | 75853 | 78735

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.