Attachment 79673 Details for Bug 62962 – dmesg with patch from comment #18 applied and via.modeset=1

dmesg with patch from comment #18 applied and via.modeset=1

dmesg (text/plain), 36.27 KB, created by ma on 2013-05-22 17:03:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: ma

Created: 2013-05-22 17:03:52 UTC

Size: 36.27 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 3.9.0-rc5+ (ulla@juerg-laptop) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #3 SMP Wed May 22 16:19:06 CEST 2013
>Disabled fast string operations
>e820: BIOS-provided physical RAM map:
>BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
>BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
>BIOS-e820: [mem 0x00000000000d0000-0x00000000000d3fff] reserved
>BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
>BIOS-e820: [mem 0x0000000000100000-0x000000002beaffff] usable
>BIOS-e820: [mem 0x000000002beb0000-0x000000002beb7fff] ACPI data
>BIOS-e820: [mem 0x000000002beb8000-0x000000002befffff] ACPI NVS
>BIOS-e820: [mem 0x000000002bf00000-0x000000002fffffff] reserved
>BIOS-e820: [mem 0x00000000fffe0000-0x00000000ffffffff] reserved
>NX (Execute Disable) protection: active
>SMBIOS 2.34 present.
>DMI: FUJITSU SIEMENS AMILO PRO V2030/AMILO PRO V2030, BIOS 1.0I-2309-8A20 04/06/2006
>e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>e820: remove [mem 0x000a0000-0x000fffff] usable
>e820: last_pfn = 0x2beb0 max_arch_pfn = 0x1000000
>MTRR default type: uncachable
>MTRR fixed ranges enabled:
>  00000-9FFFF write-back
>  A0000-BFFFF uncachable
>  C0000-C7FFF write-protect
>  C8000-DFFFF uncachable
>  E0000-FFFFF write-protect
>MTRR variable ranges enabled:
>  0 base 000000000 mask FE0000000 write-back
>  1 base 020000000 mask FF0000000 write-back
>  2 base 02BF00000 mask FFFF00000 uncachable
>  3 base 02C000000 mask FFC000000 uncachable
>  4 disabled
>  5 disabled
>  6 disabled
>  7 disabled
>PAT not supported by CPU.
>original variable MTRRs
>reg 0, base: 0GB, range: 512MB, type WB
>reg 1, base: 512MB, range: 256MB, type WB
>reg 2, base: 703MB, range: 1MB, type UC
>reg 3, base: 704MB, range: 64MB, type UC
>total RAM covered: 703M
>Found optimal setting for mtrr clean up
> gran_size: 64K 	chunk_size: 2M 	num_reg: 4  	lose cover RAM: 0G
>New variable MTRRs
>reg 0, base: 0GB, range: 512MB, type WB
>reg 1, base: 512MB, range: 128MB, type WB
>reg 2, base: 640MB, range: 64MB, type WB
>reg 3, base: 703MB, range: 1MB, type UC
>found SMP MP-table at [mem 0x000f64d0-0x000f64df] mapped at [c00f64d0]
>initial memory mapped: [mem 0x00000000-0x011fffff]
>Base memory trampoline at [c009b000] 9b000 size 16384
>init_memory_mapping: [mem 0x00000000-0x000fffff]
> [mem 0x00000000-0x000fffff] page 4k
>init_memory_mapping: [mem 0x2b600000-0x2b7fffff]
> [mem 0x2b600000-0x2b7fffff] page 2M
>init_memory_mapping: [mem 0x28000000-0x2b5fffff]
> [mem 0x28000000-0x2b5fffff] page 2M
>init_memory_mapping: [mem 0x00100000-0x27ffffff]
> [mem 0x00100000-0x001fffff] page 4k
> [mem 0x00200000-0x27ffffff] page 2M
>init_memory_mapping: [mem 0x2b800000-0x2beaffff]
> [mem 0x2b800000-0x2bdfffff] page 2M
> [mem 0x2be00000-0x2beaffff] page 4k
>BRK [0x00c94000, 0x00c94fff] PGTABLE
>BRK [0x00c95000, 0x00c97fff] PGTABLE
>BRK [0x00c98000, 0x00c98fff] PGTABLE
>RAMDISK: [mem 0x2b914000-0x2be9ffff]
>crashkernel: memory value expected
>ACPI: RSDP 000f64a0 00014 (v00 PTLTD )
>ACPI: RSDT 2beb3c1c 00038 (v01 PTLTD    RSDT   06040000  LTP 00000000)
>ACPI: FACP 2beb7eec 00074 (v01 VN800  FIC_LM7R 06040000 PTL_ 000F4240)
>ACPI: DSDT 2beb3f21 03FCB (v01 FIC    LM7R     06040000 MSFT 0100000E)
>ACPI: FACS 2beb8fc0 00040
>ACPI: APIC 2beb7f60 00050 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
>ACPI: APIC 2beb7fb0 00050 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
>ACPI: SSDT 2beb3d91 00190 (v01  PmRef  Cpu0Cst 00003001 INTL 20030224)
>ACPI: SSDT 2beb3c54 0013D (v01  PmRef    CpuPm 00003000 INTL 20030224)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>ACPI: Local APIC address 0xfee00000
>0MB HIGHMEM available.
>702MB LOWMEM available.
>  mapped low ram: 0 - 2beb0000
>  low ram: 0 - 2beb0000
>Zone ranges:
>  DMA      [mem 0x00001000-0x00ffffff]
>  Normal   [mem 0x01000000-0x2beaffff]
>  HighMem  empty
>Movable zone start for each node
>Early memory node ranges
>  node   0: [mem 0x00001000-0x0009efff]
>  node   0: [mem 0x00100000-0x2beaffff]
>On node 0 totalpages: 179790
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3998 pages, LIFO batch:0
>  Normal zone: 1374 pages used for memmap
>  Normal zone: 175792 pages, LIFO batch:31
>Using APIC driver default
>FUJITSU SIEMENS detected: Ignoring BIOS IRQ0 override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 16 low level)
>ACPI: BIOS IRQ0 override ignored.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>smpboot: Allowing 1 CPUs, 0 hotplug CPUs
>nr_irqs_gsi: 40
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
>PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000
>PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
>PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
>e820: [mem 0x30000000-0xfffdffff] available for PCI devices
>Booting paravirtualized kernel on bare hardware
>setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
>PERCPU: Embedded 14 pages/cpu @eb0f9000 s34560 r0 d22784 u57344
>pcpu-alloc: s34560 r0 d22784 u57344 alloc=14*4096
>pcpu-alloc: [0] 0 
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 178384
>Kernel command line: ro root=/dev/mapper/vg_juerglaptop-lv_root rd_LVM_LV=vg_juerglaptop/lv_root rd_LVM_LV=vg_juerglaptop/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=de_DE.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=de-latin1-nodeadkeys crashkernel=auto rhgb quiet via.modeset=1
>PID hash table entries: 4096 (order: 2, 16384 bytes)
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>__ex_table already sorted, skipping sort
>Initializing CPU#0
>Initializing HighMem for node 0 (00000000:00000000)
>Memory: 695456k/719552k available (4737k kernel code, 23704k reserved, 2495k data, 536k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffa95000 - 0xfffff000   (5544 kB)
>    pkmap   : 0xff600000 - 0xff800000   (2048 kB)
>    vmalloc : 0xec6b0000 - 0xff5fe000   ( 303 MB)
>    lowmem  : 0xc0000000 - 0xebeb0000   ( 702 MB)
>      .init : 0xc0b11000 - 0xc0b97000   ( 536 kB)
>      .data : 0xc08a05ce - 0xc0b10280   (2495 kB)
>      .text : 0xc0400000 - 0xc08a05ce   (4737 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>Hierarchical RCU implementation.
>	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
>NR_IRQS:2304 nr_irqs:256 16
>CPU 0 irqstacks, hard=eac06000 soft=eac08000
>Console: colour VGA+ 80x25
>console [tty0] enabled
>tsc: Fast TSC calibration using PIT
>tsc: Detected 1406.975 MHz processor
>Calibrating delay loop (skipped), value calculated using timer frequency.. 2813.95 BogoMIPS (lpj=1406975)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>Mount-cache hash table entries: 512
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>Initializing cgroup subsys perf_event
>Initializing cgroup subsys net_prio
>Disabled fast string operations
>mce: CPU supports 5 MCE banks
>CPU0: Thermal monitoring enabled (TM1)
>Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
>Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
>tlb_flushall_shift: 6
>Freeing SMP alternatives: 20k freed
>ACPI: Core revision 20130117
>ACPI: All ACPI Tables successfully acquired
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ...
>..... (found apic 0 pin 0) ...
>....... works.
>smpboot: CPU0: Intel(R) Celeron(R) M processor         1.40GHz (fam: 06, model: 0d, stepping: 08)
>Performance Events: p6 PMU driver.
>... version:                0
>... bit width:              32
>... generic registers:      2
>... value mask:             00000000ffffffff
>... max period:             000000007fffffff
>... fixed-purpose events:   0
>... event mask:             0000000000000003
>Brought up 1 CPUs
>smpboot: Total of 1 processors activated (2813.95 BogoMIPS)
>NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>devtmpfs: initialized
>PM: Registering ACPI NVS region [mem 0x2beb8000-0x2befffff] (294912 bytes)
>regulator-dummy: no parameters
>NET: Registered protocol family 16
>ACPI: bus type PCI registered
>PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
>PCI: PCI BIOS revision 2.10 entry at 0xfd8ec, last bus=1
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: Added _OSI(Module Device)
>ACPI: Added _OSI(Processor Device)
>ACPI: Added _OSI(3.0 _SCP Extensions)
>ACPI: Added _OSI(Processor Aggregator Device)
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
>ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>ACPI: Power Resource [PFAN] (off)
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
>acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
>acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
>acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
>acpi PNP0A03:00: host bridge window [mem 0x30000000-0xfff7ffff] (ignored)
>PCI: root bus 00: using default resources
>acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [bus 00-ff]
>pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
>pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
>pci 0000:00:00.0: [1106:0314] type 00 class 0x060000
>pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
>pci 0000:00:00.1: [1106:1314] type 00 class 0x060000
>pci 0000:00:00.2: [1106:2314] type 00 class 0x060000
>pci 0000:00:00.3: [1106:3208] type 00 class 0x060000
>pci 0000:00:00.4: [1106:4314] type 00 class 0x060000
>pci 0000:00:00.7: [1106:7314] type 00 class 0x060000
>pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
>pci 0000:00:01.0: supports D1
>pci 0000:00:06.0: [14e4:4318] type 00 class 0x028000
>pci 0000:00:06.0: reg 10: [mem 0xd0000000-0xd0001fff]
>pci 0000:00:0c.0: [104c:8031] type 02 class 0x060700
>pci 0000:00:0c.0: reg 10: [mem 0x00000000-0x00000fff]
>pci 0000:00:0c.0: supports D1 D2
>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0c.2: [104c:8032] type 00 class 0x0c0010
>pci 0000:00:0c.2: reg 10: [mem 0xd0002000-0xd00027ff]
>pci 0000:00:0c.2: reg 14: [mem 0xd0004000-0xd0007fff]
>pci 0000:00:0c.2: supports D1 D2
>pci 0000:00:0c.2: PME# supported from D0 D1 D2 D3hot
>pci 0000:00:0f.0: [1106:3149] type 00 class 0x01018f
>pci 0000:00:0f.0: reg 10: [io  0x1430-0x1437]
>pci 0000:00:0f.0: reg 14: [io  0x1424-0x1427]
>pci 0000:00:0f.0: reg 18: [io  0x1428-0x142f]
>pci 0000:00:0f.0: reg 1c: [io  0x1420-0x1423]
>pci 0000:00:0f.0: reg 20: [io  0x1400-0x140f]
>pci 0000:00:0f.0: reg 24: [io  0x1000-0x10ff]
>pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
>pci 0000:00:0f.1: reg 20: [io  0x1410-0x141f]
>pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
>pci 0000:00:10.0: reg 20: [io  0x1440-0x145f]
>pci 0000:00:10.0: supports D1 D2
>pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
>pci 0000:00:10.1: reg 20: [io  0x1460-0x147f]
>pci 0000:00:10.1: supports D1 D2
>pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
>pci 0000:00:10.4: reg 10: [mem 0xd0002800-0xd00028ff]
>pci 0000:00:10.4: supports D1 D2
>pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
>HPET not enabled in BIOS. You might try hpet=force boot option
>pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
>pci 0000:00:11.5: reg 10: [io  0x1800-0x18ff]
>pci 0000:00:11.5: supports D1 D2
>pci 0000:00:11.6: [1106:3068] type 00 class 0x078000
>pci 0000:00:11.6: reg 10: [io  0x1c00-0x1cff]
>pci 0000:00:11.6: System wakeup disabled by ACPI
>pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
>pci 0000:00:12.0: reg 10: [io  0x2000-0x20ff]
>pci 0000:00:12.0: reg 14: [mem 0xd0002c00-0xd0002cff]
>pci 0000:00:12.0: supports D1 D2
>pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:12.0: System wakeup disabled by ACPI
>pci 0000:01:00.0: [1106:3344] type 00 class 0x030000
>pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf3ffffff pref]
>pci 0000:01:00.0: reg 14: [mem 0xd1000000-0xd1ffffff]
>pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>pci 0000:01:00.0: supports D1 D2
>pci 0000:00:01.0: PCI bridge to [bus 01]
>pci 0000:00:01.0:   bridge window [mem 0xd1000000-0xd1ffffff]
>pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>pci 0000:00:0c.0: bridge configuration invalid ([bus 00-00]), reconfiguring
>pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
>pci_bus 0000:00: on NUMA node 0
>ACPI _OSC control for PCIe not granted, disabling ASPM
>ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
>ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
>ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *5, disabled.
>ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled.
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 9 10 11 12) *5
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 9 10 11 12) *8
>ACPI: Enabled 5 GPEs in block 00 to 0F
>acpi root: \_SB_.PCI0 notify handler is installed
>Found 1 acpi root devices
>ACPI: No dock devices found.
>vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:01:00.0
>SCSI subsystem initialized
>ACPI: bus type ATA registered
>libata version 3.00 loaded.
>ACPI: bus type USB registered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: pci_cache_line_size set to 64 bytes
>e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
>e820: reserve RAM buffer [mem 0x2beb0000-0x2bffffff]
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Switching to clocksource refined-jiffies
>pnp: PnP ACPI init
>ACPI: bus type PNP registered
>pnp 00:00: [dma 4]
>pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
>pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
>pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
>pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
>system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
>system 00:04: [mem 0x000e0000-0x000fffff] could not be reserved
>system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
>system 00:04: [mem 0xfff80000-0xffffffff] could not be reserved
>system 00:04: [mem 0xffb80000-0xffbfffff] has been reserved
>system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
>system 00:05: [io  0x04d0-0x04d1] has been reserved
>system 00:05: [io  0xfe10-0xfe11] has been reserved
>system 00:05: [io  0xfe00] has been reserved
>system 00:05: [io  0x4000-0x407f] has been reserved
>system 00:05: [io  0x4100-0x411f] has been reserved
>system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
>pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
>pnp: PnP ACPI: found 8 devices
>ACPI: bus type PNP unregistered
>Switching to clocksource acpi_pm
>pci 0000:00:0c.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
>pci 0000:00:0c.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
>pci 0000:00:0c.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
>pci 0000:00:0c.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
>pci 0000:00:0c.0: BAR 0: assigned [mem 0x30000000-0x30000fff]
>pci 0000:00:0c.0: BAR 15: assigned [mem 0x34000000-0x37ffffff pref]
>pci 0000:00:0c.0: BAR 16: assigned [mem 0x38000000-0x3bffffff]
>pci 0000:00:0c.0: BAR 13: assigned [io  0x2400-0x24ff]
>pci 0000:00:0c.0: BAR 14: assigned [io  0x2800-0x28ff]
>pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x10000)
>pci 0000:00:01.0: PCI bridge to [bus 01]
>pci 0000:00:01.0:   bridge window [mem 0xd1000000-0xd1ffffff]
>pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
>pci 0000:00:0c.0: CardBus bridge to [bus 02-05]
>pci 0000:00:0c.0:   bridge window [io  0x2400-0x24ff]
>pci 0000:00:0c.0:   bridge window [io  0x2800-0x28ff]
>pci 0000:00:0c.0:   bridge window [mem 0x34000000-0x37ffffff pref]
>pci 0000:00:0c.0:   bridge window [mem 0x38000000-0x3bffffff]
>pci 0000:00:01.0: setting latency timer to 64
>pci 0000:00:0c.0: setting latency timer to 64
>pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
>pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
>pci_bus 0000:01: resource 1 [mem 0xd1000000-0xd1ffffff]
>pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf3ffffff pref]
>pci_bus 0000:02: resource 0 [io  0x2400-0x24ff]
>pci_bus 0000:02: resource 1 [io  0x2800-0x28ff]
>pci_bus 0000:02: resource 2 [mem 0x34000000-0x37ffffff pref]
>pci_bus 0000:02: resource 3 [mem 0x38000000-0x3bffffff]
>NET: Registered protocol family 2
>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 8192 bind 8192)
>TCP: reno registered
>UDP hash table entries: 512 (order: 2, 16384 bytes)
>UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>NET: Registered protocol family 1
>pci 0000:00:01.0: disabling DAC on VIA PCI bridge
>ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
>ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
>ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21
>pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
>pci 0000:01:00.0: Boot video device
>PCI: CLS 32 bytes, default 64
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 5680k freed
>apm: BIOS not found.
>Initialise module verification
>audit: initializing netlink socket (disabled)
>type=2000 audit(1369249110.560:1): initialized
>bounce pool size: 64 pages
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>msgmni has been set to 1369
>SELinux:  Registering netfilter hooks
>Key type asymmetric registered
>Asymmetric key parser 'x509' registered
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>io scheduler noop registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>intel_idle: does not run on family 6 model 13
>ipmi message handler version 39.2
>IPMI System Interface driver.
>ipmi_si: Adding default-specified kcs state machine
>ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
>ipmi_si: Interface detection failed
>ipmi_si: Adding default-specified smic state machine
>ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
>ipmi_si: Interface detection failed
>ipmi_si: Adding default-specified bt state machine
>ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
>ipmi_si: Interface detection failed
>ipmi_si: Unable to find any System Interface(s)
>ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>ACPI: AC Adapter [ACAD] (on-line)
>input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>ACPI: Power Button [PWRB]
>input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
>ACPI: Lid Switch [LID]
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>ACPI: Power Button [PWRF]
>ACPI: Fan [FAN] (on)
>tsc: Marking TSC unstable due to TSC halts in idle
>ACPI: acpi_idle registered with cpuidle
>thermal LNXTHERM:00: registered as thermal_zone0
>ACPI: Thermal Zone [THRM] (56 C)
>GHES: HEST is not enabled!
>isapnp: Scanning for PnP cards...
>ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>ACPI: Battery Slot [BAT0] (battery present)
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>agpgart: Detected VIA VT3314 chipset
>agpgart-via 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
>brd: module loaded
>loop: module loaded
>libphy: Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ehci-pci: EHCI PCI platform driver
>ehci-pci 0000:00:10.4: EHCI Host Controller
>ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
>ehci-pci 0000:00:10.4: irq 21, io mem 0xd0002800
>ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 3.9.0-rc5+ ehci_hcd
>usb usb1: SerialNumber: 0000:00:10.4
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.0: irq 21, io base 0x00001440
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 3.9.0-rc5+ uhci_hcd
>usb usb2: SerialNumber: 0000:00:10.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.1: irq 21, io base 0x00001460
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 3.9.0-rc5+ uhci_hcd
>usb usb3: SerialNumber: 0000:00:10.1
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mousedev: PS/2 mouse device common for all mice
>rtc_cmos 00:01: RTC can wake from S4
>rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram
>cpuidle: using governor ladder
>cpuidle: using governor menu
>EFI Variables Facility v0.08 2004-May-17
>hidraw: raw HID events driver (C) Jiri Kosina
>usbcore: registered new interface driver usbhid
>usbhid: USB HID core driver
>drop_monitor: Initializing network drop monitor service
>TCP: cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Loading module verification certificates
>MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 6a0c9d8196f992f742801d82f40412ca4766214d'
>registered taskstats version 1
>IMA: No TPM chip found, activating TPM-bypass!
>Freeing unused kernel memory: 536k freed
>Write protecting the kernel text: 4740k
>Write protecting the kernel read-only data: 2032k
>NX-protecting the kernel data: 3452k
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
>dracut: dracut-004-303.el6
>dracut: rd_NO_LUKS: removing cryptoluks activation
>dm_mod: module verification failed: signature and/or required key missing - tainting kernel
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
>udev: starting version 147
>udevd (69): /proc/69/oom_adj is deprecated, please use /proc/69/oom_score_adj instead.
>[drm] Initialized drm 1.1.0 20060810
>[TTM] Zone  kernel: Available graphics memory: 350846 kiB
>[TTM] Initializing pool allocator
>[TTM] Initializing DMA pool allocator
>[drm] Detected 64 MB of DDR2 400 Video RAM at physical address 0xf0000000.
>[drm] Detected MMIO at physical address 0xd1000000.
>agpgart-via 0000:00:00.0: AGP 3.5 bridge
>agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
>agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
>via 0000:01:00.0: putting AGP V2 device into 4x mode
>[drm] Detected 256 MB of AGP Aperture at physical address 0xe0000000.
>[drm] Allocated 256 KB of memory for VQ
>[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[drm] No driver support for vblank timestamp query.
>[drm] Internal DVI not detected
>fbcon: viadrmfb (fb0) is primary device
>Console: switching to colour frame buffer device 128x48
>via 0000:01:00.0: fb0: viadrmfb frame buffer device
>via 0000:01:00.0: registered panic notifier
>[drm] Initialized via 3.0.0 20110221 for 0000:01:00.0 on minor 0
>dracut: Starting plymouth daemon
>usb 2-1: new low-speed USB device number 2 using uhci_hcd
>usb 2-1: New USB device found, idVendor=05e3, idProduct=1205
>usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
>usb 2-1: Product: USB Mouse
>input: USB Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input4
>hid-generic 0003:05E3:1205.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:10.0-1/input0
>yenta_cardbus 0000:00:0c.0: CardBus bridge found [1734:109b]
>yenta_cardbus 0000:00:0c.0: Enabling burst memory read transactions
>yenta_cardbus 0000:00:0c.0: Using CSCINT to route CSC interrupts to PCI
>yenta_cardbus 0000:00:0c.0: Routing CardBus interrupts to PCI
>yenta_cardbus 0000:00:0c.0: TI: mfunc 0x01ac1b22, devctl 0x64
>input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input5
>input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6
>yenta_cardbus 0000:00:0c.0: ISA IRQ mask 0x0cf8, PCI irq 19
>yenta_cardbus 0000:00:0c.0: Socket status: 30000006
>firewire_ohci 0000:00:0c.2: enabling device (0010 -> 0012)
>firewire_ohci 0000:00:0c.2: setting latency timer to 64
>firewire_ohci 0000:00:0c.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
>sata_via 0000:00:0f.0: version 2.6
>sata_via 0000:00:0f.0: routed to hard irq line 9
>scsi0 : sata_via
>scsi1 : sata_via
>ata1: SATA max UDMA/133 cmd 0x1430 ctl 0x1424 bmdma 0x1400 irq 20
>ata2: SATA max UDMA/133 cmd 0x1428 ctl 0x1420 bmdma 0x1408 irq 20
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: SAMSUNG HM040HI, YA100-02, max UDMA7
>ata1.00: 78242976 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM040HI  YA10 PQ: 0 ANSI: 5
>firewire_core 0000:00:0c.2: created device fw0: GUID 0040ca013470e7e4, S400
>ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>scsi2 : pata_acpi
>scsi3 : pata_acpi
>ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1410 irq 14
>ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1418 irq 15
>ata4.00: ATAPI: PHILIPS CD-RW/DVD-ROM SCB5265, TX08, max UDMA/33
>ata4.00: configured for UDMA/33
>scsi 3:0:0:0: CD-ROM            PHILIPS  CDRW/DVD SCB5265 TX08 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: [sda] Attached SCSI disk
>sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray
>cdrom: Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>dracut: Scanning devices sda3  for LVM logical volumes vg_juerglaptop/lv_root vg_juerglaptop/lv_swap 
>dracut: inactive '/dev/vg_juerglaptop/lv_root' [11.07 GiB] inherit
>dracut: inactive '/dev/vg_juerglaptop/lv_swap' [1.34 GiB] inherit
>bio: create slab <bio-1> at 1
>EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
>dracut: Mounted root filesystem /dev/mapper/vg_juerglaptop-lv_root
>dracut: Loading SELinux policy
>type=1404 audit(1369249114.966:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
>SELinux: 2048 avtab hash slots, 277524 rules.
>SELinux: 2048 avtab hash slots, 277524 rules.
>SELinux:  9 users, 12 roles, 3897 types, 205 bools, 1 sens, 1024 cats
>SELinux:  81 classes, 277524 rules
>SELinux:  Permission audit_access in class file not defined in policy.
>SELinux:  Permission audit_access in class dir not defined in policy.
>SELinux:  Permission execmod in class dir not defined in policy.
>SELinux:  Permission audit_access in class lnk_file not defined in policy.
>SELinux:  Permission open in class lnk_file not defined in policy.
>SELinux:  Permission execmod in class lnk_file not defined in policy.
>SELinux:  Permission audit_access in class chr_file not defined in policy.
>SELinux:  Permission audit_access in class blk_file not defined in policy.
>SELinux:  Permission execmod in class blk_file not defined in policy.
>SELinux:  Permission audit_access in class sock_file not defined in policy.
>SELinux:  Permission execmod in class sock_file not defined in policy.
>SELinux:  Permission audit_access in class fifo_file not defined in policy.
>SELinux:  Permission execmod in class fifo_file not defined in policy.
>SELinux:  Permission syslog in class capability2 not defined in policy.
>SELinux:  Permission wake_alarm in class capability2 not defined in policy.
>SELinux:  Permission block_suspend in class capability2 not defined in policy.
>SELinux:  Permission attach_queue in class tun_socket not defined in policy.
>SELinux: the above unknown classes and permissions will be allowed
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev dm-0, type ext4), uses xattr
>type=1403 audit(1369249116.825:3): policy loaded auid=4294967295 ses=4294967295
>dracut: 
>dracut: Switching root
>readahead: starting
>udev: starting version 147
>WARNING! power/level is deprecated; use power/control instead
>b43-pci-bridge 0000:00:06.0: enabling device (0000 -> 0002)
>ssb: Found chip with id 0x4318, rev 0x02 and package 0x00
>ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
>ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
>ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
>ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
>ssb: Sonics Silicon Backplane found on PCI device 0000:00:06.0
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
> excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
> excluding 0x3f0-0x3f7 0x4d0-0x4d7
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
> clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
> clean.
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
> excluding 0xc0000-0xd3fff 0xdc000-0xfffff
>pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
> clean.
>pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
> clean.
>pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
> clean.
>snd_via82xx 0000:00:11.5: enabling device (0000 -> 0001)
>ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
>ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
>ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
>snd_via82xx 0000:00:11.5: setting latency timer to 64
>snd_via82xx_modem 0000:00:11.6: enabling device (0000 -> 0001)
>snd_via82xx_modem 0000:00:11.6: setting latency timer to 64
>via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
>via-rhine 0000:00:12.0 eth0: VIA Rhine II at 0xd0002c00, 00:40:ca:d8:b0:88, IRQ 23
>via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sr 3:0:0:0: Attached scsi generic sg1 type 5
>microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
>microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>NET: Registered protocol family 10
>cfg80211: Calling CRDA to update world regulatory domain
>b43-phy0: Broadcom 4318 WLAN found (core revision 9)
>b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7
>b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
>Broadcom 43xx driver loaded [ Features: PMLS ]
>ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>cfg80211: World regulatory domain updated:
>cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
>cfg80211: Calling CRDA for country: DE
>cfg80211: Regulatory domain changed to country: DE
>cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
>cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
>cfg80211:   (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0b/LNXVIDEO:00/input/input7
>EXT4-fs (dm-0): re-mounted. Opts: (null)
>EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>SELinux: initialized (dev sda2, type ext4), uses xattr
>Adding 1409020k swap on /dev/mapper/vg_juerglaptop-lv_swap.  Priority:-1 extents:1 across:1409020k 
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (10963 buckets, 43852 max)
>ip_tables: (C) 2000-2006 Netfilter Core Team
>p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
>b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
>b43-phy0 debug: Chip initialized
>b43-phy0 debug: 32-bit DMA initialized
>b43-phy0 debug: QoS disabled
>b43-phy0 debug: Wireless interface started
>b43-phy0 debug: Adding Interface type 2
>IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>8021q: 802.1Q VLAN Support v1.8
>IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>wlan0: authenticate with bc:05:43:5e:60:cb
>wlan0: send auth to bc:05:43:5e:60:cb (try 1/3)
>wlan0: send auth to bc:05:43:5e:60:cb (try 2/3)
>wlan0: authenticated
>wlan0: associate with bc:05:43:5e:60:cb (try 1/3)
>wlan0: RX AssocResp from bc:05:43:5e:60:cb (capab=0x431 status=0 aid=3)
>wlan0: associated
>IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
>fuse init (API version 7.21)

Actions: View

Attachments on bug 62962: 77247 | 77250 | 77251 | 77272 | 77663 | 77940 | 77941 | 77942 | 77943 | 77944 | 77949 | 79651 | 79659 | 79660 | 79673 | 79674 | 80515 | 80581 | 80582 | 80870 | 80871 | 81236

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.