Attachment 81609 Details for Bug 66296 – dmesg: S3 resume with call trace

dmesg: S3 resume with call trace

S3_call_trace_on_acer (text/plain), 114.54 KB, created by shui yangwei on 2013-06-28 06:09:45 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: shui yangwei

Created: 2013-06-28 06:09:45 UTC

Size: 114.54 KB

patch

obsolete

>[    0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000
>[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
>[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
>[    0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb10000
>[    0.000000] PM: Registered nosave memory: 00000000feb10000 - 00000000fec00000
>[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
>[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
>[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee01000
>[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
>[    0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
>[    0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 26 pages/cpu @ffff88015f200000 s74368 r8192 d23936 u262144
>[    0.000000] pcpu-alloc: s74368 r8192 d23936 u262144 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
>[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 945572
>[    0.000000] Policy zone: Normal
>[    0.000000] Kernel command line: BOOT_IMAGE=kernels//nightly_parents/2013_06_28/drm-intel-next-queued/9199918a1e148c18e3519cb7b2d90a127d7ea87b/bzImage_x86_64 root=/dev/sda2 drm.debug=0xe modules_path=kernels//nightly_parents/2013_06_28/drm-intel-next-queued/9199918a1e148c18e3519cb7b2d90a127d7ea87b/modules_x86_64/lib/modules/3.10.0-rc2_drm-intel-next-queued_919991_20130628_+
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] Checking aperture...
>[    0.000000] No AGP bridge found
>[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
>[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>[    0.000000] Memory: 3639628k/5756928k available (7086k kernel code, 1914512k absent, 202788k reserved, 4127k data, 62380k init)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
>[    0.000000] Hierarchical RCU implementation.
>[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
>[    0.000000] NR_IRQS:4352 nr_irqs:744 16
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.001000] tsc: Fast TSC calibration using PIT
>[    0.002000] tsc: Detected 2194.937 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.87 BogoMIPS (lpj=2194937)
>[    0.000217] pid_max: default: 32768 minimum: 301
>[    0.000341] Security Framework initialized
>[    0.000667] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.001774] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>[    0.002300] Mount-cache hash table entries: 256
>[    0.002577] CPU: Physical Processor ID: 0
>[    0.002689] CPU: Processor Core ID: 0
>[    0.003751] mce: CPU supports 9 MCE banks
>[    0.003870] CPU0: Thermal monitoring enabled (TM1)
>[    0.003987] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
>[    0.003987] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
>[    0.003987] tlb_flushall_shift: 6
>[    0.004339] Freeing SMP alternatives: 32k freed
>[    0.004448] ACPI: Core revision 20130328
>[    0.013507] ACPI: All ACPI Tables successfully acquired
>[    0.014136] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.024256] smpboot: CPU0: Intel(R) Core(TM) i7-4702MQ CPU @ 2.20GHz (fam: 06, model: 3c, stepping: 03)
>[    0.024552] TSC deadline timer enabled
>[    0.024559] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
>[    0.024854] ... version:                3
>[    0.024957] ... bit width:              48
>[    0.025063] ... generic registers:      4
>[    0.025167] ... value mask:             0000ffffffffffff
>[    0.025277] ... max period:             000000007fffffff
>[    0.025383] ... fixed-purpose events:   3
>[    0.025489] ... event mask:             000000070000000f
>[    0.037558] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>[    0.037558] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.025735] smpboot: Booting Node   0, Processors  #1 #2 #3 #4 #5 #6 #7 OK
>[    0.126623] Brought up 8 CPUs
>[    0.126728] smpboot: Total of 8 processors activated (35118.99 BogoMIPS)
>[    0.133748] devtmpfs: initialized
>[    0.134072] PM: Registering ACPI NVS region [mem 0x8cebf000-0x8cfbefff] (1048576 bytes)
>[    0.136036] xor: automatically using best checksumming function:
>[    0.145951]    avx       : 22580.000 MB/sec
>[    0.146075] RTC time: 13:45:57, date: 06/28/13
>[    0.146213] NET: Registered protocol family 16
>[    0.146649] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>[    0.146818] ACPI: bus type PCI registered
>[    0.147019] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
>[    0.147194] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>[    0.155577] PCI: Using configuration type 1 for base access
>[    0.156029] mtrr: your CPUs had inconsistent variable MTRR settings
>[    0.156138] mtrr: probably your BIOS does not setup all CPUs.
>[    0.156247] mtrr: corrected configuration.
>[    0.163211] bio: create slab <bio-0> at 0
>[    0.180026] raid6: sse2x1    7050 MB/s
>[    0.197061] raid6: sse2x2    8785 MB/s
>[    0.214091] raid6: sse2x4   10343 MB/s
>[    0.231122] raid6: avx2x1   13906 MB/s
>[    0.248154] raid6: avx2x2   15769 MB/s
>[    0.265185] raid6: avx2x4   18457 MB/s
>[    0.265290] raid6: using algorithm avx2x4 (18457 MB/s)
>[    0.265396] raid6: using avx2x2 recovery algorithm
>[    0.265554] ACPI: Added _OSI(Module Device)
>[    0.265659] ACPI: Added _OSI(Processor Device)
>[    0.265765] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.265871] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.267881] ACPI: EC: EC description table is found, configuring boot EC
>[    0.269915] ACPI: Executed 1 blocks of module-level executable AML code
>[    0.274254] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>[    0.275518] ACPI: SSDT 000000008ce58c18 003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20120518)
>[    0.276251] ACPI: Dynamic OEM Table Load:
>[    0.276434] ACPI: SSDT           (null) 003D3 (v01  PmRef  Cpu0Cst 00003001 INTL 20120518)
>[    0.283460] ACPI: SSDT 000000008ce58618 005AA (v01  PmRef    ApIst 00003000 INTL 20120518)
>[    0.284256] ACPI: Dynamic OEM Table Load:
>[    0.284441] ACPI: SSDT           (null) 005AA (v01  PmRef    ApIst 00003000 INTL 20120518)
>[    0.289355] ACPI: SSDT 000000008ce57d98 00119 (v01  PmRef    ApCst 00003000 INTL 20120518)
>[    0.290081] ACPI: Dynamic OEM Table Load:
>[    0.290265] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20120518)
>[    0.296462] ACPI: Interpreter enabled
>[    0.296573] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
>[    0.296829] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
>[    0.297095] ACPI: (supports S0 S3 S4 S5)
>[    0.297199] ACPI: Using IOAPIC for interrupt routing
>[    0.297346] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.312538] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
>[    0.313195] PCI host bridge to bus 0000:00
>[    0.313303] pci_bus 0000:00: root bus resource [bus 00-fe]
>[    0.313415] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.313524] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.313634] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.313745] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
>[    0.313861] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
>[    0.314021] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
>[    0.314054] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.314158] pci 0000:00:01.0: System wakeup disabled by ACPI
>[    0.314311] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
>[    0.314322] pci 0000:00:02.0: reg 10: [mem 0xd3000000-0xd33fffff 64bit]
>[    0.314328] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
>[    0.314333] pci 0000:00:02.0: reg 20: [io  0x5000-0x503f]
>[    0.314484] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
>[    0.314491] pci 0000:00:03.0: reg 10: [mem 0xd3610000-0xd3613fff 64bit]
>[    0.314662] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
>[    0.314680] pci 0000:00:14.0: reg 10: [mem 0xd3600000-0xd360ffff 64bit]
>[    0.314738] pci 0000:00:14.0: PME# supported from D3hot D3cold
>[    0.314759] pci 0000:00:14.0: System wakeup disabled by ACPI
>[    0.314906] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
>[    0.314925] pci 0000:00:16.0: reg 10: [mem 0xd3618000-0xd361800f 64bit]
>[    0.314987] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.315135] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
>[    0.315155] pci 0000:00:1a.0: reg 10: [mem 0xd361d000-0xd361d3ff]
>[    0.315240] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.315271] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    0.315425] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
>[    0.315439] pci 0000:00:1b.0: reg 10: [mem 0xd3614000-0xd3617fff 64bit]
>[    0.315500] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.315524] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    0.315671] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
>[    0.315733] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.315766] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.315912] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
>[    0.315974] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>[    0.316025] pci 0000:00:1c.2: System wakeup disabled by ACPI
>[    0.316173] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
>[    0.316235] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.316293] pci 0000:00:1c.3: System wakeup disabled by ACPI
>[    0.316447] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
>[    0.316467] pci 0000:00:1d.0: reg 10: [mem 0xd361c000-0xd361c3ff]
>[    0.316551] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.316581] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.316731] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
>[    0.316875] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
>[    0.316890] pci 0000:00:1f.2: reg 10: [io  0x5088-0x508f]
>[    0.316897] pci 0000:00:1f.2: reg 14: [io  0x5094-0x5097]
>[    0.316904] pci 0000:00:1f.2: reg 18: [io  0x5080-0x5087]
>[    0.316911] pci 0000:00:1f.2: reg 1c: [io  0x5090-0x5093]
>[    0.316919] pci 0000:00:1f.2: reg 20: [io  0x5060-0x507f]
>[    0.316926] pci 0000:00:1f.2: reg 24: [mem 0xd361b000-0xd361b7ff]
>[    0.316961] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.317085] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
>[    0.317099] pci 0000:00:1f.3: reg 10: [mem 0xd3619000-0xd36190ff 64bit]
>[    0.317119] pci 0000:00:1f.3: reg 20: [io  0x5040-0x505f]
>[    0.317299] pci 0000:01:00.0: [10de:11e3] type 00 class 0x030200
>[    0.317307] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
>[    0.317315] pci 0000:01:00.0: reg 14: [mem 0xa0000000-0xafffffff 64bit pref]
>[    0.317323] pci 0000:01:00.0: reg 1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
>[    0.317329] pci 0000:01:00.0: reg 24: [io  0x4000-0x407f]
>[    0.317335] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
>[    0.317372] pci 0000:01:00.0: System wakeup disabled by ACPI
>[    0.319514] pci 0000:00:01.0: PCI bridge to [bus 01-06]
>[    0.319623] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
>[    0.319626] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd2ffffff]
>[    0.319629] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
>[    0.319704] pci 0000:07:00.0: [10ec:5209] type 00 class 0xff0000
>[    0.319721] pci 0000:07:00.0: reg 10: [mem 0xd1000000-0xd1000fff]
>[    0.319843] pci 0000:07:00.0: supports D1 D2
>[    0.319844] pci 0000:07:00.0: PME# supported from D1 D2 D3hot
>[    0.319868] pci 0000:07:00.0: System wakeup disabled by ACPI
>[    0.321528] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
>[    0.321638] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
>[    0.321641] pci 0000:00:1c.0:   bridge window [mem 0xd1000000-0xd1ffffff]
>[    0.321646] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
>[    0.321720] pci 0000:0d:00.0: [168c:0034] type 00 class 0x028000
>[    0.321742] pci 0000:0d:00.0: reg 10: [mem 0xd3500000-0xd357ffff 64bit]
>[    0.321794] pci 0000:0d:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
>[    0.321847] pci 0000:0d:00.0: supports D1 D2
>[    0.321849] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.321871] pci 0000:0d:00.0: System wakeup disabled by ACPI
>[    0.323535] pci 0000:00:1c.2: PCI bridge to [bus 0d]
>[    0.323646] pci 0000:00:1c.2:   bridge window [mem 0xd3500000-0xd35fffff]
>[    0.323651] pci 0000:00:1c.2:   bridge window [mem 0x9fb00000-0x9fbfffff 64bit pref]
>[    0.323760] pci 0000:0e:00.0: [14e4:1692] type 00 class 0x020000
>[    0.323784] pci 0000:0e:00.0: reg 10: [mem 0xd3400000-0xd340ffff 64bit]
>[    0.323840] pci 0000:0e:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
>[    0.323909] pci 0000:0e:00.0: PME# supported from D3hot D3cold
>[    0.323935] pci 0000:0e:00.0: System wakeup disabled by ACPI
>[    0.325576] pci 0000:00:1c.3: PCI bridge to [bus 0e]
>[    0.325686] pci 0000:00:1c.3:   bridge window [mem 0xd3400000-0xd34fffff]
>[    0.325780] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
>[    0.326222] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
>[    0.327014] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.327601] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.328323] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.328903] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    0.329484] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.330203] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
>[    0.330922] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
>[    0.331503] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
>[    0.332490] ACPI: Enabled 4 GPEs in block 00 to 3F
>[    0.332685] acpi root: \_SB_.PCI0 notify handler is installed
>[    0.332750] Found 1 acpi root devices
>[    0.332789] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
>[    0.333054] ACPI: No dock devices found.
>[    0.333233] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.333404] vgaarb: loaded
>[    0.333507] vgaarb: bridge control possible 0000:00:02.0
>[    0.333711] SCSI subsystem initialized
>[    0.333816] ACPI: bus type ATA registered
>[    0.333993] libata version 3.00 loaded.
>[    0.334066] ACPI: bus type USB registered
>[    0.334212] usbcore: registered new interface driver usbfs
>[    0.334341] usbcore: registered new interface driver hub
>[    0.334475] usbcore: registered new device driver usb
>[    0.334652] pps_core: LinuxPPS API ver. 1 registered
>[    0.334762] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
>[    0.334950] PTP clock support registered
>[    0.335155] PCI: Using ACPI for IRQ routing
>[    0.340986] PCI: pci_cache_line_size set to 64 bytes
>[    0.341092] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
>[    0.341094] e820: reserve RAM buffer [mem 0x86cb0000-0x87ffffff]
>[    0.341095] e820: reserve RAM buffer [mem 0x8c6bf000-0x8fffffff]
>[    0.341096] e820: reserve RAM buffer [mem 0x8d000000-0x8fffffff]
>[    0.341098] e820: reserve RAM buffer [mem 0x15f600000-0x15fffffff]
>[    0.341222] NetLabel: Initializing
>[    0.341328] NetLabel:  domain hash size = 128
>[    0.341433] NetLabel:  protocols = UNLABELED CIPSOv4
>[    0.341547] NetLabel:  unlabeled traffic allowed by default
>[    0.341724] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.342198] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.344321] Switching to clocksource hpet
>[    0.344485] pnp: PnP ACPI init
>[    0.344591] ACPI: bus type PNP registered
>[    0.344715] pnp 00:00: [dma 4]
>[    0.344746] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.344783] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.344888] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.344943] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.344995] system 00:04: [io  0x0680-0x069f] has been reserved
>[    0.345132] system 00:04: [io  0xffff] has been reserved
>[    0.345240] system 00:04: [io  0xffff] has been reserved
>[    0.345355] system 00:04: [io  0xffff] has been reserved
>[    0.345472] system 00:04: [io  0x0400-0x0453] has been reserved
>[    0.345581] system 00:04: [io  0x0800-0x08fe] has been reserved
>[    0.345690] system 00:04: [io  0x0900-0x09fe] has been reserved
>[    0.345801] system 00:04: [io  0x0a00-0x0afe] has been reserved
>[    0.345909] system 00:04: [io  0x0b00-0x0bfe] has been reserved
>[    0.346018] system 00:04: [io  0x1800-0x18fe] has been reserved
>[    0.346127] system 00:04: [io  0x164e-0x164f] has been reserved
>[    0.346238] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.346281] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.346339] system 00:06: [io  0x1854-0x1857] has been reserved
>[    0.346455] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.346511] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.346557] pnp 00:08: Plug and Play ACPI device, IDs ETD050a SYN1b00 SYN0002 PNP0f13 (active)
>[    0.346661] pnp 00:09: disabling [mem 0xffffffff-0x100000ffe] because it overlaps 0000:0d:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref]
>[    0.346875] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
>[    0.346986] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
>[    0.347097] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
>[    0.347208] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
>[    0.347318] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
>[    0.347431] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
>[    0.347547] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
>[    0.347658] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
>[    0.347769] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
>[    0.347881] system 00:09: [mem 0x9fa10000-0x9fa10fff] has been reserved
>[    0.347991] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.348451] pnp: PnP ACPI: found 10 devices
>[    0.348556] ACPI: bus type PNP unregistered
>[    0.356317] pci 0000:0d:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
>[    0.356520] pci 0000:00:1c.3: BAR 9: assigned [mem 0x9fc00000-0x9fcfffff pref]
>[    0.356690] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
>[    0.356860] pci 0000:00:01.0: PCI bridge to [bus 01-06]
>[    0.356968] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
>[    0.357079] pci 0000:00:01.0:   bridge window [mem 0xd2000000-0xd2ffffff]
>[    0.357190] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
>[    0.357361] pci 0000:00:1c.0: PCI bridge to [bus 07-0c]
>[    0.357474] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
>[    0.357586] pci 0000:00:1c.0:   bridge window [mem 0xd1000000-0xd1ffffff]
>[    0.357699] pci 0000:00:1c.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
>[    0.357873] pci 0000:0d:00.0: BAR 6: assigned [mem 0x9fb00000-0x9fb0ffff pref]
>[    0.358041] pci 0000:00:1c.2: PCI bridge to [bus 0d]
>[    0.358150] pci 0000:00:1c.2:   bridge window [mem 0xd3500000-0xd35fffff]
>[    0.358263] pci 0000:00:1c.2:   bridge window [mem 0x9fb00000-0x9fbfffff 64bit pref]
>[    0.358437] pci 0000:0e:00.0: BAR 6: assigned [mem 0x9fc00000-0x9fc0ffff pref]
>[    0.358611] pci 0000:00:1c.3: PCI bridge to [bus 0e]
>[    0.358722] pci 0000:00:1c.3:   bridge window [mem 0xd3400000-0xd34fffff]
>[    0.358835] pci 0000:00:1c.3:   bridge window [mem 0x9fc00000-0x9fcfffff pref]
>[    0.359244] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.359246] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.359248] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.359250] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff]
>[    0.359251] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
>[    0.359253] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd2ffffff]
>[    0.359255] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
>[    0.359256] pci_bus 0000:07: resource 0 [io  0x3000-0x3fff]
>[    0.359258] pci_bus 0000:07: resource 1 [mem 0xd1000000-0xd1ffffff]
>[    0.359260] pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
>[    0.359261] pci_bus 0000:0d: resource 1 [mem 0xd3500000-0xd35fffff]
>[    0.359263] pci_bus 0000:0d: resource 2 [mem 0x9fb00000-0x9fbfffff 64bit pref]
>[    0.359265] pci_bus 0000:0e: resource 1 [mem 0xd3400000-0xd34fffff]
>[    0.359266] pci_bus 0000:0e: resource 2 [mem 0x9fc00000-0x9fcfffff pref]
>[    0.359288] NET: Registered protocol family 2
>[    0.359540] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.359800] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>[    0.359979] TCP: Hash tables configured (established 32768 bind 32768)
>[    0.360102] TCP: reno registered
>[    0.360211] UDP hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.360335] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
>[    0.362195] NET: Registered protocol family 1
>[    0.362359] RPC: Registered named UNIX socket transport module.
>[    0.362473] RPC: Registered udp transport module.
>[    0.362580] RPC: Registered tcp transport module.
>[    0.362686] RPC: Registered tcp NFSv4.1 backchannel transport module.
>[    0.362800] pci 0000:00:02.0: Boot video device
>[    0.363241] PCI: CLS 64 bytes, default 64
>[    0.401303] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.401418] software IO TLB [mem 0x886bf000-0x8c6bf000] (64MB) mapped at [ffff8800886bf000-ffff88008c6befff]
>[    0.401720] Simple Boot Flag at 0x44 set to 0x1
>[    0.402907] audit: initializing netlink socket (disabled)
>[    0.403021] type=2000 audit(1372427157.384:1): initialized
>[    0.426384] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.428914] VFS: Disk quotas dquot_6.5.2
>[    0.429075] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>[    0.430077] NFS: Registering the id_resolver key type
>[    0.430191] Key type id_resolver registered
>[    0.430296] Key type id_legacy registered
>[    0.430403] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>[    0.430709] fuse init (API version 7.22)
>[    0.431173] bio: create slab <bio-1> at 1
>[    0.431433] Btrfs loaded
>[    0.431545] msgmni has been set to 7108
>[    0.431929] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>[    0.432098] io scheduler noop registered
>[    0.432202] io scheduler deadline registered
>[    0.432350] io scheduler cfq registered (default)
>[    0.432539] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>[    0.432633] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
>[    0.432733] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
>[    0.432809] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
>[    0.432924] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>[    0.433305] ACPI: Requesting acpi_cpufreq
>[    0.433777] Monitor-Mwait will be used to enter C-1 state
>[    0.433780] Monitor-Mwait will be used to enter C-2 state
>[    0.433785] ACPI: acpi_idle registered with cpuidle
>[    0.439254] thermal LNXTHERM:00: registered as thermal_zone0
>[    0.439364] ACPI: Thermal Zone [THRM] (52 C)
>[    0.439552] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    0.440303] Non-volatile memory driver v1.3
>[    0.440411] Linux agpgart interface v0.103
>[    0.442270] brd: module loaded
>[    0.442636] Loading iSCSI transport class v2.0-870.
>[    0.443217] iscsi: registered transport (tcp)
>[    0.443445] Adaptec aacraid driver 1.2-0[30200]-ms
>[    0.443631] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    0.443875] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.05.00.03-k.
>[    0.444107] iscsi: registered transport (qla4xxx)
>[    0.444244] QLogic iSCSI HBA Driver
>[    0.444409] DC390: clustering now enabled by default. If you get problems load
>[    0.444593]        with "disable_clustering=1" and report to maintainers
>[    0.444767] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    0.444965] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    0.445101] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    0.445279] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    0.445441] osst :I: Tape driver with OnStream support version 0.99.4
>[    0.445441] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    0.445799] SCSI Media Changer driver v0.25 
>[    0.445967] ahci 0000:00:1f.2: version 3.0
>[    0.446061] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
>[    0.446101] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x5 impl SATA mode
>[    0.446274] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
>[    0.446446] ahci 0000:00:1f.2: setting latency timer to 64
>[    0.449997] scsi0 : ahci
>[    0.450193] scsi1 : ahci
>[    0.450378] scsi2 : ahci
>[    0.450570] scsi3 : ahci
>[    0.450741] ata1: SATA max UDMA/133 abar m2048@0xd361b000 port 0xd361b100 irq 44
>[    0.450909] ata2: DUMMY
>[    0.451011] ata3: SATA max UDMA/133 abar m2048@0xd361b000 port 0xd361b200 irq 44
>[    0.451179] ata4: DUMMY
>[    0.453160] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)
>[    0.453353] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
>[    0.453595] tg3.c:v3.131 (April 09, 2013)
>[    0.472334] libphy: tg3 mdio bus: probed
>[    0.477291] tg3 0000:0e:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 7c:05:07:33:14:f5
>[    0.477468] tg3 0000:0e:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=e00:01)
>[    0.477653] tg3 0000:0e:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
>[    0.477823] tg3 0000:0e:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>[    0.478013] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    0.478123] e100: Copyright(c) 1999-2006 Intel Corporation
>[    0.478267] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    0.478378] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    0.478517] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    0.478634] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
>[    0.478777] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.3-k
>[    0.478887] igb: Copyright (c) 2007-2013 Intel Corporation.
>[    0.479059] usbcore: registered new interface driver zd1201
>[    0.479194] usbcore: registered new interface driver catc
>[    0.479331] usbcore: registered new interface driver kaweth
>[    0.479438] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    0.479644] usbcore: registered new interface driver pegasus
>[    0.479778] usbcore: registered new interface driver rtl8150
>[    0.479916] usbcore: registered new interface driver asix
>[    0.480051] usbcore: registered new interface driver ax88179_178a
>[    0.480188] usbcore: registered new interface driver cdc_ether
>[    0.480323] usbcore: registered new interface driver dm9601
>[    0.480458] usbcore: registered new interface driver gl620a
>[    0.480599] usbcore: registered new interface driver net1080
>[    0.480735] usbcore: registered new interface driver plusb
>[    0.480871] usbcore: registered new interface driver rndis_host
>[    0.481008] usbcore: registered new interface driver cdc_subset
>[    0.481144] usbcore: registered new interface driver zaurus
>[    0.481279] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    0.481480] usbcore: registered new interface driver cdc_ncm
>[    0.481736] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    0.481846] ehci-pci: EHCI PCI platform driver
>[    0.482035] ehci-pci 0000:00:1a.0: setting latency timer to 64
>[    0.482042] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[    0.482196] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[    0.482376] ehci-pci 0000:00:1a.0: debug port 2
>[    0.486385] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
>[    0.486397] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd361d000
>[    0.491606] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[    0.491726] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.491837] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.492006] usb usb1: Product: EHCI Host Controller
>[    0.492113] usb usb1: Manufacturer: Linux 3.10.0-rc2_drm-intel-next-queued_919991_20130628_+ ehci_hcd
>[    0.492285] usb usb1: SerialNumber: 0000:00:1a.0
>[    0.492501] hub 1-0:1.0: USB hub found
>[    0.492618] hub 1-0:1.0: 2 ports detected
>[    0.492852] ehci-pci 0000:00:1d.0: setting latency timer to 64
>[    0.492857] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    0.493012] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[    0.493191] ehci-pci 0000:00:1d.0: debug port 2
>[    0.497198] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    0.497209] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd361c000
>[    0.502618] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    0.502736] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.502850] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.503019] usb usb2: Product: EHCI Host Controller
>[    0.503126] usb usb2: Manufacturer: Linux 3.10.0-rc2_drm-intel-next-queued_919991_20130628_+ ehci_hcd
>[    0.503300] usb usb2: SerialNumber: 0000:00:1d.0
>[    0.503505] hub 2-0:1.0: USB hub found
>[    0.503616] hub 2-0:1.0: 2 ports detected
>[    0.503826] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    0.503963] uhci_hcd: USB Universal Host Controller Interface driver
>[    0.504184] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[    0.504186] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.504337] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    0.504587] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    0.504612] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X
>[    0.504648] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
>[    0.504759] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.504927] usb usb3: Product: xHCI Host Controller
>[    0.505035] usb usb3: Manufacturer: Linux 3.10.0-rc2_drm-intel-next-queued_919991_20130628_+ xhci_hcd
>[    0.505207] usb usb3: SerialNumber: 0000:00:14.0
>[    0.505379] xHCI xhci_add_endpoint called for root hub
>[    0.505380] xHCI xhci_check_bandwidth called for root hub
>[    0.505415] hub 3-0:1.0: USB hub found
>[    0.505533] hub 3-0:1.0: 14 ports detected
>[    0.506513] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    0.506672] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
>[    0.506862] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
>[    0.506973] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    0.507142] usb usb4: Product: xHCI Host Controller
>[    0.507248] usb usb4: Manufacturer: Linux 3.10.0-rc2_drm-intel-next-queued_919991_20130628_+ xhci_hcd
>[    0.507421] usb usb4: SerialNumber: 0000:00:14.0
>[    0.507591] xHCI xhci_add_endpoint called for root hub
>[    0.507592] xHCI xhci_check_bandwidth called for root hub
>[    0.507636] hub 4-0:1.0: USB hub found
>[    0.507748] hub 4-0:1.0: 4 ports detected
>[    0.514697] usbcore: registered new interface driver usb-storage
>[    0.514880] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>[    0.518561] i8042: Detected active multiplexing controller, rev 1.1
>[    0.520272] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.520380] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[    0.520502] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[    0.520635] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[    0.520763] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[    0.520973] mousedev: PS/2 mouse device common for all mice
>[    0.521185] rtc_cmos 00:05: RTC can wake from S4
>[    0.521422] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>[    0.521555] rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
>[    0.523531] cpuidle: using governor ladder
>[    0.523741] cpuidle: using governor menu
>[    0.523909] hidraw: raw HID events driver (C) Jiri Kosina
>[    0.524697] usbcore: registered new interface driver usbhid
>[    0.524809] usbhid: USB HID core driver
>[    0.525046] TCP: cubic registered
>[    0.525156] Initializing XFRM netlink socket
>[    0.525263] NET: Registered protocol family 17
>[    0.525384] Key type dns_resolver registered
>[    0.526146] PM: Hibernation image not present or could not be loaded.
>[    0.526153] registered taskstats version 1
>[    0.526688]   Magic number: 1:718:787
>[    0.526871] Warning: unable to open an initial console.
>[    0.530078] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    0.546987] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[    0.547163] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[    0.747140] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[    0.747317] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[    0.755928] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[    0.756057] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    0.757926] ata1.00: ATA-8: WDC WD2500BPVT-22JJ5T0, 01.01A01, max UDMA/133
>[    0.758042] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    0.760213] ata1.00: configured for UDMA/133
>[    0.760421] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BPVT-2 01.0 PQ: 0 ANSI: 5
>[    0.761017] ata3.00: ATAPI: HL-DT-ST DVDRAM GT90N, 1.00, max UDMA/133
>[    0.761112] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
>[    0.761113] sd 0:0:0:0: [sda] 4096-byte physical blocks
>[    0.761131] sd 0:0:0:0: [sda] Write Protect is off
>[    0.761132] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    0.761140] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    0.761353] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    0.765462] ata3.00: configured for UDMA/133
>[    0.775574] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT90N     1.00 PQ: 0 ANSI: 5
>[    0.785950] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>[    0.786124] cdrom: Uniform CD-ROM driver Revision: 3.20
>[    0.786699] sr 2:0:0:0: Attached scsi CD-ROM sr0
>[    0.786893] sr 2:0:0:0: Attached scsi generic sg1 type 5
>[    0.794969] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    0.909541] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
>[    0.909656] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    0.910452] hub 1-1:1.0: USB hub found
>[    0.910630] hub 1-1:1.0: 6 ports detected
>[    0.947313] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[    0.947490] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[    1.014182] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[    1.128762] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
>[    1.128875] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    1.129682] hub 2-1:1.0: USB hub found
>[    1.130014] hub 2-1:1.0: 8 ports detected
>[    1.147959] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[    1.148136] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[    1.284457] usb 3-5: new high-speed USB device number 2 using xhci_hcd
>[    1.351275] usb 3-5: New USB device found, idVendor=04f2, idProduct=b374
>[    1.351389] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[    1.351510] usb 3-5: Product: HD WebCam
>[    1.351614] usb 3-5: Manufacturer: SunplusIT INC.
>[    1.357516] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[    1.357697] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[    1.404567] tsc: Refined TSC clocksource calibration: 2194.917 MHz
>[    1.404682] Switching to clocksource tsc
>[    1.557968] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[    1.558143] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[    1.574744] usb 3-10: new full-speed USB device number 3 using xhci_hcd
>[    1.587463] usb 3-10: string descriptor 0 malformed (err = -61), defaulting to 0x0409
>[    1.589459] usb 3-10: New USB device found, idVendor=0489, idProduct=e04e
>[    1.589572] usb 3-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.406899] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input1
>[    3.820809]  sda: sda1 sda2
>[    3.821340] sd 0:0:0:0: [sda] Attached SCSI disk
>[    3.822189] Freeing unused kernel memory: 62380k freed
>[    3.858898] dracut: dracut-018-35.git20120510.fc17
>[    3.883026] udevd[1315]: starting version 182
>[    3.895461] [drm] Initialized drm 1.1.0 20060810
>[    3.896017] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input2
>[    3.896264] ACPI: Power Button [PWRB]
>[    3.896572] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0E:00/input/input3
>[    3.896904] ACPI: Sleep Button [SLPB]
>[    3.897099] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
>[    3.898062] ACPI: Lid Switch [LID]
>[    3.898384] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>[    3.898853] ACPI: Power Button [PWRF]
>[    3.901246] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0416 flags=is_mobile,need_gfx_hws,is_haswell,has_force_wake,has_fbc,has_hotplug,has_bsd_ring,has_blt_ring,has_vebox_ring,has_llc,has_ddi,has_fpga_dbg,
>[    3.901489] [drm] Memory usable by graphics device = 2048M
>[    3.901604] [drm:i915_gem_gtt_init], GMADR size = 256M
>[    3.901607] [drm:i915_gem_gtt_init], GTT stolen size = 128M
>[    3.901614] i915 0000:00:02.0: setting latency timer to 64
>[    3.910436] [drm:intel_detect_pch], Found LynxPoint PCH
>[    3.910625] [drm:intel_opregion_setup], graphic opregion physical addr: 0x8cfa9018
>[    3.910632] [drm:intel_opregion_setup], Public ACPI methods supported
>[    3.910633] [drm:intel_opregion_setup], SWSCI supported
>[    3.910634] [drm:intel_opregion_setup], ASLE supported
>[    3.910666] i915 0000:00:02.0: irq 46 for MSI/MSI-X
>[    3.910674] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    3.910784] [drm] Driver supports precise vblank timestamp query.
>[    3.910893] [drm:init_vbt_defaults], Set default to SSC at 100MHz
>[    3.910895] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT HASWELL        d
>[    3.910897] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    3.910899] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
>[    3.910902] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[    3.910904] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 0 101700 1600 1648 1680 1824 900 903 908 928 0x8 0xa
>[    3.910907] [drm:parse_lfp_panel_data], VBT initial LVDS value 30033c
>[    3.910909] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[    3.910910] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    3.910913] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[    3.910959] [drm:i915_gem_init_stolen], found 134217728 bytes of stolen memory at 97a00000
>[    3.910989] [drm:intel_modeset_init], 3 display pipes available.
>[    3.911000] [drm:intel_ddi_pll_init], CDCLK running at 450000KHz
>[    3.911002] [drm:intel_shared_dpll_init], 0 shared PLLs initialized
>[    3.911005] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    3.911548] [drm:intel_dp_init_connector], Adding eDP connector on port A
>[    3.911600] [drm:intel_dp_i2c_init], i2c_init DPDDC-A
>[    3.911602] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[    3.911608] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    3.911761] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
>[    3.912062] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
>[    3.912119] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[    3.912126] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
>[    3.912129] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    3.912132] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600
>[    3.912134] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200
>[    3.912136] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[    3.912138] [drm:ironlake_edp_panel_vdd_on], eDP VDD already on
>[    3.912399] [drm:intel_dp_get_dpcd], DPCD: 11 0a 81 01 00 00 01 00 02 00 00 00 00 0b 00
>[    3.912401] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[    3.912408] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x7d0000a, PP_OFF 0x1f407d0, PP_DIV 0x186906
>[    3.912411] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[    3.912413] [drm:ironlake_edp_panel_vdd_on], eDP VDD already on
>[    3.913091] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[    3.932087] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[    3.932094] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    3.932096] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[    3.932099] [drm:intel_panel_get_backlight], get backlight PWM = 5273
>[    3.932101] [drm:intel_panel_get_max_backlight], max backlight PWM = 5273
>[    3.932151] [drm:intel_dp_init_connector], Adding DP connector on port C
>[    3.932215] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
>[    3.935065] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    3.935070] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[    3.937917] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    3.937921] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
>[    4.009109] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000]
>[    4.011380] [drm:init_status_page], render ring hws offset: 0x00000000
>[    4.011441] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
>[    4.011447] [drm:init_status_page], bsd ring hws offset: 0x00022000
>[    4.011535] [drm:init_status_page], blitter ring hws offset: 0x00043000
>[    4.011618] [drm:init_status_page], video enhancement ring hws offset: 0x00064000
>[    4.011724] [drm:create_default_context], Default HW context loaded
>[    4.011726] [drm:i915_gem_context_init], HW context support initialized
>[    4.011742] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port A in DP mode
>[    4.011751] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port B in DP mode
>[    4.011761] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port C in DP mode
>[    4.011770] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port D in DP mode
>[    4.011779] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port E in FDI mode
>[    4.011840] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
>[    4.011843] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
>[    4.011845] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
>[    4.011848] [drm:intel_ddi_get_crtc_pll], Pipe A connected to port A using clock 0x20000000
>[    4.011851] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe=0
>[    4.011854] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: enabled, pipe=0
>[    4.011857] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TMDS-19] hw state readout: disabled, pipe=0
>[    4.011860] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:eDP-1] hw state readout: enabled
>[    4.011862] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled
>[    4.011865] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:DP-1] hw state readout: disabled
>[    4.011867] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:HDMI-A-1] hw state readout: disabled
>[    4.011870] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
>[    4.011872] [drm:intel_dump_pipe_config], cpu_transcoder: P
>[    4.011874] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    4.011876] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.011878] [drm:intel_dump_pipe_config], requested mode:
>[    4.011880] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
>[    4.011884] [drm:intel_dump_pipe_config], adjusted mode:
>[    4.011885] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5
>[    4.011888] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.011891] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x06400384
>[    4.011893] [drm:intel_dump_pipe_config], ips: 0
>[    4.011895] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
>[    4.011897] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[    4.011898] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    4.011900] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.011903] [drm:intel_dump_pipe_config], requested mode:
>[    4.011904] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    4.011907] [drm:intel_dump_pipe_config], adjusted mode:
>[    4.011909] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    4.011912] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.011914] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[    4.011916] [drm:intel_dump_pipe_config], ips: 0
>[    4.011918] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
>[    4.011920] [drm:intel_dump_pipe_config], cpu_transcoder: C
>[    4.011922] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    4.011924] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.011926] [drm:intel_dump_pipe_config], requested mode:
>[    4.011928] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    4.011931] [drm:intel_dump_pipe_config], adjusted mode:
>[    4.011932] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    4.011935] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.011937] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[    4.011939] [drm:intel_dump_pipe_config], ips: 0
>[    4.011942] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
>[    4.011945] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[    4.011947] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[    4.011950] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[    4.011952] [drm:check_crtc_state], [CRTC:3]
>[    4.011956] [drm:check_crtc_state], [CRTC:5]
>[    4.011958] [drm:check_crtc_state], [CRTC:7]
>[    4.011963] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
>[    4.011972] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1]
>[    4.011978] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    4.011981] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes :
>[    4.011983] [drm:drm_mode_debug_printmodeline], Modeline 22:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[    4.011988] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[    4.011990] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
>[    4.021121] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[    4.021123] [drm:intel_crt_detect], CRT not detected via hotplug
>[    4.021277] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    4.021279] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    4.021281] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    4.021283] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    4.021615] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    4.021617] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    4.021619] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    4.021621] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[    4.021624] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
>[    4.024523] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    4.029018] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    4.033021] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    4.034132] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] disconnected
>[    4.034134] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1]
>[    4.059032] [drm:drm_detect_monitor_audio], Monitor has basic audio support
>[    4.083939] [drm:drm_edid_to_eld], ELD monitor HP 2309
>[    4.083941] [drm:parse_hdmi_vsdb], HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0
>[    4.083944] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
>[    4.083955] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] probed modes :
>[    4.083957] [drm:drm_mode_debug_printmodeline], Modeline 42:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    4.083961] [drm:drm_mode_debug_printmodeline], Modeline 43:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[    4.083964] [drm:drm_mode_debug_printmodeline], Modeline 31:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    4.083968] [drm:drm_mode_debug_printmodeline], Modeline 32:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
>[    4.083971] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    4.083975] [drm:drm_mode_debug_printmodeline], Modeline 30:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
>[    4.083978] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[    4.083982] [drm:drm_mode_debug_printmodeline], Modeline 41:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[    4.083986] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    4.083989] [drm:drm_mode_debug_printmodeline], Modeline 36:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    4.083993] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    4.083996] [drm:drm_mode_debug_printmodeline], Modeline 40:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[    4.084000] [drm:drm_mode_debug_printmodeline], Modeline 38:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    4.084003] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    4.084007] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    4.084010] [drm:drm_mode_debug_printmodeline], Modeline 35:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    4.084014] [drm:drm_setup_crtcs], 
>[    4.084015] [drm:drm_enable_connectors], connector 12 enabled? yes
>[    4.084017] [drm:drm_enable_connectors], connector 9 enabled? no
>[    4.084019] [drm:drm_enable_connectors], connector 20 enabled? no
>[    4.084021] [drm:drm_enable_connectors], connector 21 enabled? yes
>[    4.084023] [drm:drm_target_preferred], looking for cmdline mode on connector 12
>[    4.084025] [drm:drm_target_preferred], looking for preferred mode on connector 12
>[    4.084027] [drm:drm_target_preferred], found mode 1600x900
>[    4.084029] [drm:drm_target_preferred], looking for cmdline mode on connector 21
>[    4.084031] [drm:drm_target_preferred], looking for preferred mode on connector 21
>[    4.084032] [drm:drm_target_preferred], found mode 1920x1080
>[    4.084034] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[    4.084038] [drm:drm_setup_crtcs], desired mode 1600x900 set on crtc 3
>[    4.084041] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 5
>[    4.084043] [drm:i915_gem_object_create_stolen], creating stolen object: size=7e9000
>[    4.084046] [drm:i915_pages_create_for_stolen], offset=0x0, size=8294400
>[    4.085295] [drm:intelfb_create], allocated 1920x1080 fb: 0x000a1000, bo ffff880154d34f00
>[    4.085373] fbcon: inteldrmfb (fb0) is primary device
>[    4.086530] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    4.086532] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
>[    4.086533] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[    4.086536] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    4.086539] [drm:drm_mode_debug_printmodeline], Modeline 23:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[    4.086541] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    4.086543] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    4.086546] [drm:connected_sink_compute_bpp], [CONNECTOR:12:eDP-1] checking for sink bpp constrains
>[    4.086547] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
>[    4.086549] [drm:intel_dp_compute_config], DP link computation with max lane count 1 max bw 0a pixel clock 101700KHz
>[    4.086551] [drm:intel_dp_compute_config], DP link bw 0a lane count 1 clock 270000 bpp 18
>[    4.086553] [drm:intel_dp_compute_config], DP link bw required 183060 available 216000
>[    4.086555] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[    4.086556] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[    4.086557] [drm:intel_dump_pipe_config], cpu_transcoder: P
>[    4.086559] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[    4.086561] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    4.086562] [drm:intel_dump_pipe_config], requested mode:
>[    4.086565] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[    4.086566] [drm:intel_dump_pipe_config], adjusted mode:
>[    4.086568] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[    4.086570] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    4.086571] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[    4.086572] [drm:intel_dump_pipe_config], ips: 0
>[    4.086574] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[    4.086578] [drm:ironlake_edp_backlight_off], 
>[    4.303406] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[    4.303408] [drm:ironlake_edp_panel_vdd_on], eDP VDD already on
>[    4.303409] [drm:ironlake_edp_panel_off], Turn eDP power off
>[    4.303412] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[    4.303415] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000
>[    5.129236] [drm:intel_update_fbc], no output, disabling
>[    5.129252] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
>[    5.129254] [drm:intel_update_fbc], no output, disabling
>[    5.129259] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:1600x900]
>[    5.129260] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
>[    5.129268] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[    5.129270] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[    5.129273] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[    5.129279] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[    5.129281] [drm:ironlake_edp_panel_vdd_on], eDP was not running
>[    5.330431] [drm:ironlake_edp_panel_on], Turn eDP power on
>[    5.330432] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[    5.330436] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008
>[    5.330439] [drm:ironlake_wait_panel_on], Wait for panel power on
>[    5.330442] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b
>[    5.539641] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[    5.539646] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[    5.591668] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[    5.592245] [drm:intel_dp_start_link_train], clock recovery OK
>[    5.592246] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[    5.593124] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[    5.644744] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[    5.696799] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[    5.696801] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[    5.696954] [drm:ironlake_edp_backlight_on], 
>[    5.698804] [drm:intel_panel_actually_set_backlight], set backlight PWM = 5273
>[    5.714816] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
>[    5.714819] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[    5.714820] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[    5.714822] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[    5.714824] [drm:check_crtc_state], [CRTC:3]
>[    5.714827] [drm:check_crtc_state], [CRTC:5]
>[    5.714828] [drm:check_crtc_state], [CRTC:7]
>[    5.714831] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[    5.714832] [drm:intel_set_config_compute_mode_changes], crtc has no fb, full mode set
>[    5.714834] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[    5.714836] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    5.714839] [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    5.714841] [drm:intel_modeset_stage_output_state], encoder changed, full mode switch
>[    5.714842] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.714844] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.714845] [drm:intel_modeset_stage_output_state], crtc changed, full mode switch
>[    5.714847] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[    5.714849] [drm:connected_sink_compute_bpp], [CONNECTOR:21:HDMI-A-1] checking for sink bpp constrains
>[    5.714851] [drm:intel_hdmi_compute_config], picking bpc to 8 for HDMI output
>[    5.714853] [drm:intel_hdmi_compute_config], forcing pipe bpc to 24 for HDMI
>[    5.714854] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
>[    5.714856] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
>[    5.714857] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[    5.714858] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>[    5.714860] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    5.714861] [drm:intel_dump_pipe_config], requested mode:
>[    5.714864] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    5.714865] [drm:intel_dump_pipe_config], adjusted mode:
>[    5.714868] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    5.714869] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    5.714870] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[    5.714872] [drm:intel_dump_pipe_config], ips: 0
>[    5.714874] [drm:intel_ddi_pll_mode_set], Using WRPLL 1 on pipe B
>[    5.716991] [drm:intel_ddi_calculate_wrpll], WRPLL: 148500000Hz refresh rate with p=6, n2=33 r2=20
>[    5.717024] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
>[    5.717026] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[    5.717032] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:1920x1080]
>[    5.717033] [drm:intel_ddi_mode_set], Preparing DDI mode on port C, pipe B
>[    5.717034] [drm:intel_ddi_mode_set], HDMI audio on pipe B on DDI
>[    5.717035] [drm:intel_ddi_mode_set], HDMI audio: write eld information
>[    5.717037] [drm:intel_write_eld], ELD on [CONNECTOR:21:HDMI-A-1], [ENCODER:19:TMDS-19]
>[    5.717039] [drm:haswell_write_eld], HDMI: Haswell Audio initialize....
>[    5.717040] [drm:haswell_write_eld], HDMI audio: enable codec
>[    5.730875] [drm:intel_enable_rc6], Haswell: only RC6 available
>[    5.730877] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    5.734836] [drm:gen6_enable_rps], Overclocking supported. Max: 1150MHz, Overclock max: 1150MHz
>[    5.768870] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[    5.768872] [drm:haswell_write_eld], HDMI audio: pin eld vld status=0x      40
>[    5.768874] [drm:haswell_write_eld], HDMI audio: eld vld status=0x      50
>[    5.768875] [drm:haswell_write_eld], HDMI audio: audio conf: 0x  70fa60
>[    5.768877] [drm:haswell_write_eld], ELD on pipe B
>[    5.768880] [drm:haswell_write_eld], port num:0
>[    5.768881] [drm:haswell_write_eld], ELD size 8
>[    5.820922] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[    5.872974] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[    5.872975] [drm:intel_update_fbc], more than one pipe active, disabling compression
>[    5.874978] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
>[    5.874981] [drm:intel_connector_check_state], [CONNECTOR:21:HDMI-A-1]
>[    5.874983] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[    5.874985] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[    5.874987] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[    5.874988] [drm:check_crtc_state], [CRTC:3]
>[    5.874992] [drm:check_crtc_state], [CRTC:5]
>[    5.874995] [drm:check_crtc_state], [CRTC:7]
>[    5.874997] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    5.875000] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.875002] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.875021] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    5.875023] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.875025] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.875027] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[    5.875029] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.875031] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.881917] Console: switching to colour frame buffer device 200x56
>[    5.881921] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    5.881923] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.881924] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.881926] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[    5.881928] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.881929] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.889088] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    5.889142] i915 0000:00:02.0: registered panic notifier
>[    5.889615] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
>[    5.889933] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20130328/psargs-359)
>[    5.890027] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff88015a6ad230), AE_NOT_FOUND (20130328/psparse-537)
>[    5.890405] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
>[    5.890549] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3d/LNXVIDEO:00/input/input6
>[    5.897597] [drm:asle_set_backlight], bclp = 0x800000ff
>[    5.897601] [drm:intel_panel_get_max_backlight], max backlight PWM = 5273
>[    5.897603] [drm:intel_panel_actually_set_backlight], set backlight PWM = 5273
>[    5.897708] [drm:asle_set_backlight], bclp = 0x80000000
>[    5.897711] [drm:intel_panel_get_max_backlight], max backlight PWM = 5273
>[    5.897713] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[    5.897923] acpi device:58: registered as cooling_device8
>[    5.898011] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    5.898153] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
>[    5.898396] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    5.901371] dracut: Starting plymouth daemon
>[    5.908020] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    5.908023] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.908025] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.908027] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[    5.908028] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.908029] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.914789] [drm:i915_driver_open], 
>[    5.914799] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    5.914803] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.914805] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.914807] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[    5.914809] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.914810] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.914812] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    5.914814] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.914815] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.914820] [drm:i915_driver_open], 
>[    5.914824] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    5.914826] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.914827] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.914829] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[    5.914830] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.914832] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.914833] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    5.914835] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    5.914836] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    5.914840] [drm:i915_driver_open], 
>[    5.914883] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[4] ENCODERS[3]
>[    5.914886] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[4] ENCODERS[3]
>[    5.914892] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[    5.914894] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1]
>[    5.914901] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    5.914904] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes :
>[    5.914905] [drm:drm_mode_debug_printmodeline], Modeline 22:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[    5.914909] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
>[    5.918202] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[    5.918206] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[    5.918209] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[    5.918211] [drm:intel_crt_detect], CRT not detected via hotplug
>[    5.918370] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    5.918372] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    5.918374] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    5.918376] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    5.918707] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    5.918708] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    5.918709] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    5.918711] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[    5.918714] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
>[    5.918715] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[    5.918717] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[    5.918719] [drm:intel_crt_detect], CRT not detected via hotplug
>[    5.918870] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[    5.918871] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    5.918873] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[    5.918874] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[    5.919205] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[    5.919206] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[    5.919208] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[    5.919209] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[    5.919213] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[    5.919214] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
>[    5.922138] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    5.926923] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    5.930950] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    5.932034] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] disconnected
>[    5.932041] [drm:drm_mode_getconnector], [CONNECTOR:20:?]
>[    5.932043] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
>[    5.934941] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    5.938931] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    5.942934] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    5.944045] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] disconnected
>[    5.944050] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[    5.944052] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1]
>[    5.968944] [drm:drm_detect_monitor_audio], Monitor has basic audio support
>[    5.993853] [drm:drm_edid_to_eld], ELD monitor HP 2309
>[    5.993855] [drm:parse_hdmi_vsdb], HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0
>[    5.993858] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
>[    5.993871] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] probed modes :
>[    5.993874] [drm:drm_mode_debug_printmodeline], Modeline 42:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[    5.993878] [drm:drm_mode_debug_printmodeline], Modeline 43:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[    5.993881] [drm:drm_mode_debug_printmodeline], Modeline 31:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[    5.993885] [drm:drm_mode_debug_printmodeline], Modeline 32:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
>[    5.993888] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[    5.993892] [drm:drm_mode_debug_printmodeline], Modeline 30:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
>[    5.993896] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[    5.993899] [drm:drm_mode_debug_printmodeline], Modeline 41:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[    5.993903] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[    5.993906] [drm:drm_mode_debug_printmodeline], Modeline 36:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[    5.993910] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[    5.993913] [drm:drm_mode_debug_printmodeline], Modeline 40:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[    5.993917] [drm:drm_mode_debug_printmodeline], Modeline 38:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[    5.993920] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[    5.993924] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[    5.993927] [drm:drm_mode_debug_printmodeline], Modeline 35:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[    5.993933] [drm:drm_mode_getconnector], [CONNECTOR:21:?]
>[    6.005568] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    6.005572] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    6.005574] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    6.005577] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[    6.005579] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    6.005580] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    6.069655] Linux video capture interface: v2.00
>[    6.071264] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b374)
>[    6.076078] input: PC Speaker as /devices/platform/pcspkr/input/input8
>[    6.076360] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    6.076387] ALSA sound/pci/hda/hda_intel.c:3787 Haswell must build in CONFIG_SND_HDA_I915
>[    6.076388] ALSA sound/pci/hda/hda_intel.c:3817 Error request power-well from i915
>[    6.076601] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[    6.076608] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[    6.076612] [drm:i915_hotplug_work_func], Connector DP-1 (pin 5) received hotplug event.
>[    6.076614] [drm:i915_hotplug_work_func], Connector HDMI-A-1 (pin 5) received hotplug event.
>[    6.076618] [drm:intel_hpd_irq_event], [CONNECTOR:20:DP-1] status updated from 2 to 2
>[    6.076655] ACPI: AC Adapter [AC0] (on-line)
>[    6.077931] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x8
>[    6.078696] wmi: Mapper loaded
>[    6.079099] acer_wmi: Acer Laptop ACPI-WMI Extras
>[    6.079154] acer_wmi: Function bitmap for Communication Button: 0x801
>[    6.079221] acer_wmi: Brightness must be controlled by acpi video driver
>[    6.079482] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x8
>[    6.079879] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input9
>[    6.080017] usbcore: registered new interface driver uvcvideo
>[    6.080056] USB Video Class driver (1.1.1)
>[    6.081591] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x8
>[    6.083515] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x8
>[    6.085178] ALSA sound/pci/hda/patch_realtek.c:414 SKU: Nid=0x1d sku_cfg=0x40589d2d
>[    6.085180] ALSA sound/pci/hda/patch_realtek.c:416 SKU: port_connectivity=0x1
>[    6.085186] ALSA sound/pci/hda/patch_realtek.c:417 SKU: enable_pcbeep=0x1
>[    6.085188] ALSA sound/pci/hda/patch_realtek.c:418 SKU: check_sum=0x00000008
>[    6.085190] ALSA sound/pci/hda/patch_realtek.c:419 SKU: customization=0x0000009d
>[    6.085192] ALSA sound/pci/hda/patch_realtek.c:420 SKU: external_amp=0x5
>[    6.085194] ALSA sound/pci/hda/patch_realtek.c:421 SKU: platform_type=0x1
>[    6.085196] ALSA sound/pci/hda/patch_realtek.c:422 SKU: swap=0x0
>[    6.085198] ALSA sound/pci/hda/patch_realtek.c:423 SKU: override=0x1
>[    6.085296] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x8
>[    6.085374] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[    6.085375] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[    6.085376] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[    6.085377] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
>[    6.085377] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
>[    6.085379] ALSA sound/pci/hda/hda_auto_parser.c:410      Internal Mic=0x1b
>[    6.085380] ALSA sound/pci/hda/hda_auto_parser.c:410      Mic=0x18
>[    6.085381] ALSA sound/pci/hda/patch_realtek.c:486 realtek: No valid SSID, checking pincfg 0x40589d2d for NID 0x1d
>[    6.085382] ALSA sound/pci/hda/patch_realtek.c:502 realtek: Enabling init ASM_ID=0x9d2d CODEC_ID=10ec0282
>[    6.086471] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x8
>[    6.088252] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x8
>[    6.089504] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x8
>[    6.090163] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \GPIS 1 (20130328/utaddress-251)
>[    6.090166] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 2 (20130328/utaddress-251)
>[    6.090168] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    6.090172] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPXX 1 (20130328/utaddress-251)
>[    6.090175] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \PMIX 2 (20130328/utaddress-251)
>[    6.090178] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 3 (20130328/utaddress-251)
>[    6.090181] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 4 (20130328/utaddress-251)
>[    6.090184] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 5 (20130328/utaddress-251)
>[    6.090185] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    6.090192] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPXX 1 (20130328/utaddress-251)
>[    6.090195] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \PMIX 2 (20130328/utaddress-251)
>[    6.090197] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 3 (20130328/utaddress-251)
>[    6.090199] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 4 (20130328/utaddress-251)
>[    6.090201] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 5 (20130328/utaddress-251)
>[    6.090203] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 6 (20130328/utaddress-251)
>[    6.090204] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    6.090204] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    6.095659] ACPI Warning: 0x0000000000005040-0x000000000000505f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
>[    6.095660] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    6.095981] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
>[    6.096049] input: Acer WMI hotkeys as /devices/virtual/input/input10
>[    6.096540] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
>[    6.096544] ACPI: Battery Slot [BAT0] (battery present)
>[    6.096684] input: Acer BMA150 accelerometer as /devices/virtual/input/input11
>[    6.109496] [drm:drm_detect_monitor_audio], Monitor has basic audio support
>[    6.109499] [drm:intel_hpd_irq_event], [CONNECTOR:21:HDMI-A-1] status updated from 1 to 1
>[    6.129392] iTCO_vendor_support: vendor-support=0
>[    6.131687] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[    6.132524] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[    6.135308] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
>[    6.136996] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    6.139233] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[    6.139241] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    6.139243] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    6.139245] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[    6.139247] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[    6.139248] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[    6.382619] [drm:i915_hotplug_work_func], running encoder hotplug functions
>[    6.382623] [drm:i915_hotplug_work_func], Connector DP-1 (pin 5) received hotplug event.
>[    6.382625] [drm:i915_hotplug_work_func], Connector HDMI-A-1 (pin 5) received hotplug event.
>[    6.385545] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    6.390383] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    6.393584] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
>[    6.395698] EXT4-fs (sda2): write access will be enabled during recovery
>[    6.397781] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[    6.399502] [drm:intel_hpd_irq_event], [CONNECTOR:20:DP-1] status updated from 2 to 2
>[    6.424385] [drm:drm_detect_monitor_audio], Monitor has basic audio support
>[    6.424388] [drm:intel_hpd_irq_event], [CONNECTOR:21:HDMI-A-1] status updated from 1 to 1
>[    7.032529] EXT4-fs (sda2): recovery complete
>[    7.043220] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    7.172846] dracut: Checking ext4: /dev/sda2
>[    7.174133] dracut: issuing e2fsck -a  /dev/sda2
>[    7.398146] dracut: /dev/sda2: clean, 2211956/14131200 files, 37809821/56510208 blocks
>[    7.399692] dracut: Remounting /dev/sda2 with -o ro
>[    7.499921] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[    7.642227] dracut: Mounted root filesystem /dev/sda2
>[    7.802416] device-mapper: uevent: version 1.0.3
>[    7.803747] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
>[    7.976738] dracut: Switching root
>[   10.556979] udevd[2559]: starting version 182
>[   11.509255] EXT4-fs (sda2): re-mounted. Opts: (null)
>[   13.487608] Adding 8388604k swap on /dev/sda1.  Priority:0 extents:1 across:8388604k 
>[   14.451795] watchdog (3714): /proc/3714/oom_adj is deprecated, please use /proc/3714/oom_score_adj instead.
>[   15.275090] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[   15.275097] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[   15.275099] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[   15.275101] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[   15.275103] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[   15.275105] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[   15.275107] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[   15.275108] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[   15.275110] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[   19.751947] tg3 0000:0e:00.0: irq 48 for MSI/MSI-X
>[   20.536732] tg3 0000:0e:00.0 p3p1: Link is down
>[   21.541678] tg3 0000:0e:00.0 p3p1: Link is up at 100 Mbps, full duplex
>[   21.542648] tg3 0000:0e:00.0 p3p1: Flow control is off for TX and off for RX
>[   68.323157] NET: Registered protocol family 10
>[  164.605392] PM: Syncing filesystems ... done.
>[  164.606741] PM: Preparing system for mem sleep
>[  164.606843] Freezing user space processes ... (elapsed 0.01 seconds) done.
>[  164.618010] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
>[  164.629024] PM: Entering mem sleep
>[  164.629100] Suspending console(s) (use no_console_suspend to debug)
>[  164.629355] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  164.640233] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C
>[  164.640271] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  164.640280] [drm:ironlake_edp_backlight_off], 
>[  164.873225] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[  164.873232] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
>[  164.873234] [drm:ironlake_edp_panel_off], Turn eDP power off
>[  164.873237] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[  164.873240] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000
>[  164.912917] sd 0:0:0:0: [sda] Stopping disk
>[  165.644002] [drm:intel_update_fbc], plane not 0, disabling compression
>[  165.668026] [drm:intel_update_fbc], no output, disabling
>[  165.679025] PM: suspend of devices complete after 1048.744 msecs
>[  165.679137] PM: late suspend of devices complete after 0.110 msecs
>[  165.679287] tg3 0000:0e:00.0: System wakeup enabled by ACPI
>[  165.690242] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[  165.701125] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
>[  165.712059] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>[  165.723077] PM: noirq suspend of devices complete after 43.894 msecs
>[  165.723391] ACPI: Preparing to enter system sleep state S3
>[  165.723588] PM: Saving platform NVS memory
>[  165.724105] Disabling non-boot CPUs ...
>[  165.725356] smpboot: CPU 1 is now offline
>[  165.726795] smpboot: CPU 2 is now offline
>[  165.728287] smpboot: CPU 3 is now offline
>[  165.729626] smpboot: CPU 4 is now offline
>[  165.730093] Broke affinity for irq 44
>[  165.731112] smpboot: CPU 5 is now offline
>[  165.732413] smpboot: CPU 6 is now offline
>[  165.732865] Broke affinity for irq 45
>[  165.733887] smpboot: CPU 7 is now offline
>[  165.735250] ACPI: Low-level resume complete
>[  165.735285] PM: Restoring platform NVS memory
>[  165.735752] Enabling non-boot CPUs ...
>[  165.735779] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[  165.750309] CPU1 is up
>[  165.750322] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[  165.764769] CPU2 is up
>[  165.764783] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[  165.779226] CPU3 is up
>[  165.779239] smpboot: Booting Node 0 Processor 4 APIC 0x4
>[  165.793690] CPU4 is up
>[  165.793705] smpboot: Booting Node 0 Processor 5 APIC 0x5
>[  165.808160] CPU5 is up
>[  165.808173] smpboot: Booting Node 0 Processor 6 APIC 0x6
>[  165.822650] CPU6 is up
>[  165.822663] smpboot: Booting Node 0 Processor 7 APIC 0x7
>[  165.837166] CPU7 is up
>[  165.844101] ACPI: Waking up from system sleep state S3
>[  165.868799] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
>[  165.879815] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
>[  165.901852] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[  165.912854] pci 0000:01:00.0: power state changed by ACPI to D0
>[  165.923949] PM: noirq resume of devices complete after 77.056 msecs
>[  165.924011] PM: early resume of devices complete after 0.043 msecs
>[  165.924035] i915 0000:00:02.0: setting latency timer to 64
>[  165.924047] xhci_hcd 0000:00:14.0: setting latency timer to 64
>[  165.924064] ahci 0000:00:1f.2: setting latency timer to 64
>[  165.924072] tg3 0000:0e:00.0: System wakeup disabled by ACPI
>[  165.924283] ehci-pci 0000:00:1a.0: setting latency timer to 64
>[  165.924343] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
>[  165.924367] ehci-pci 0000:00:1d.0: setting latency timer to 64
>[  165.925290] [drm:i915_redisable_vga], Something enabled VGA plane, disabling it
>[  165.925617] [drm:intel_opregion_setup], graphic opregion physical addr: 0x8cfa9018
>[  165.925627] [drm:intel_opregion_setup], Public ACPI methods supported
>[  165.925628] [drm:intel_opregion_setup], SWSCI supported
>[  165.925629] [drm:intel_opregion_setup], ASLE supported
>[  165.926365] tg3 0000:0e:00.0 p3p1: Link is down
>[  165.930522] dpm_run_callback(): pnp_bus_resume+0x0/0x6c returns -19
>[  165.930523] PM: Device 00:07 failed to resume: error -19
>[  165.992980] [drm:init_status_page], render ring hws offset: 0x00000000
>[  165.993049] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
>[  165.993055] [drm:init_status_page], bsd ring hws offset: 0x00022000
>[  165.993102] [drm:init_status_page], blitter ring hws offset: 0x00043000
>[  165.993146] [drm:init_status_page], video enhancement ring hws offset: 0x00064000
>[  165.993241] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port A in DP mode
>[  165.993249] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port B in DP mode
>[  165.993257] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port C in DP mode
>[  165.993265] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port D in DP mode
>[  165.993273] [drm:intel_prepare_ddi_buffers], Initializing DDI buffers for port E in FDI mode
>[  165.993392] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
>[  165.993394] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
>[  165.993395] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
>[  165.993398] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe=0
>[  165.993399] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: disabled, pipe=0
>[  165.993401] [drm:intel_modeset_readout_hw_state], [ENCODER:19:TMDS-19] hw state readout: disabled, pipe=0
>[  165.993403] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:eDP-1] hw state readout: disabled
>[  165.993404] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled
>[  165.993405] [drm:intel_modeset_readout_hw_state], [CONNECTOR:20:DP-1] hw state readout: disabled
>[  165.993407] [drm:intel_modeset_readout_hw_state], [CONNECTOR:21:HDMI-A-1] hw state readout: disabled
>[  165.993409] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
>[  165.993410] [drm:intel_dump_pipe_config], cpu_transcoder: A
>[  165.993411] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  165.993412] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  165.993413] [drm:intel_dump_pipe_config], requested mode:
>[  165.993415] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  165.993416] [drm:intel_dump_pipe_config], adjusted mode:
>[  165.993418] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  165.993419] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  165.993420] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  165.993421] [drm:intel_dump_pipe_config], ips: 0
>[  165.993423] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
>[  165.993423] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  165.993424] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  165.993426] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  165.993426] [drm:intel_dump_pipe_config], requested mode:
>[  165.993428] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  165.993429] [drm:intel_dump_pipe_config], adjusted mode:
>[  165.993430] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  165.993431] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  165.993432] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  165.993433] [drm:intel_dump_pipe_config], ips: 0
>[  165.993434] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
>[  165.993435] [drm:intel_dump_pipe_config], cpu_transcoder: C
>[  165.993436] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  165.993437] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  165.993438] [drm:intel_dump_pipe_config], requested mode:
>[  165.993439] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  165.993440] [drm:intel_dump_pipe_config], adjusted mode:
>[  165.993441] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  165.993442] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  165.993443] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  165.993444] [drm:intel_dump_pipe_config], ips: 0
>[  165.993446] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  165.993448] [drm:connected_sink_compute_bpp], [CONNECTOR:12:eDP-1] checking for sink bpp constrains
>[  165.993450] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
>[  165.993452] [drm:intel_dp_compute_config], DP link computation with max lane count 1 max bw 0a pixel clock 101700KHz
>[  165.993453] [drm:intel_dp_compute_config], DP link bw 0a lane count 1 clock 270000 bpp 18
>[  165.993454] [drm:intel_dp_compute_config], DP link bw required 183060 available 216000
>[  165.993456] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[  165.993457] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[  165.993458] [drm:intel_dump_pipe_config], cpu_transcoder: P
>[  165.993459] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[  165.993460] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  165.993461] [drm:intel_dump_pipe_config], requested mode:
>[  165.993463] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[  165.993463] [drm:intel_dump_pipe_config], adjusted mode:
>[  165.993465] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[  165.993466] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  165.993467] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  165.993468] [drm:intel_dump_pipe_config], ips: 0
>[  165.993483] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
>[  165.993485] [drm:intel_update_fbc], no output, disabling
>[  165.993493] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:1600x900]
>[  165.993494] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
>[  165.993501] [drm:ironlake_edp_panel_vdd_on], Turn eDP VDD on
>[  165.993503] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[  165.993506] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[  165.993512] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
>[  165.993513] [drm:ironlake_edp_panel_vdd_on], eDP was not running
>[  166.194155] [drm:ironlake_edp_panel_on], Turn eDP power on
>[  166.194158] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[  166.194162] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008
>[  166.194165] [drm:ironlake_wait_panel_on], Wait for panel power on
>[  166.194168] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b
>[  166.231202] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  166.248220] ata3.00: configured for UDMA/133
>[  166.273443] usb 3-5: reset high-speed USB device number 2 using xhci_hcd
>[  166.330356] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155a07500
>[  166.403366] [drm:ironlake_edp_panel_vdd_off], Turn eDP VDD off 1
>[  166.403372] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
>[  166.440623] usb 3-10: reset full-speed USB device number 3 using xhci_hcd
>[  166.452162] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155a1d600
>[  166.452163] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155a1d680
>[  166.452165] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155a1d640
>[  166.452166] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155958b40
>[  166.452167] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880155958b00
>[  166.455411] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  166.455989] [drm:intel_dp_start_link_train], clock recovery OK
>[  166.455991] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  166.456869] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[  166.508425] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  166.560479] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  166.560482] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[  166.560631] [drm:ironlake_edp_backlight_on], 
>[  166.562463] [drm:intel_panel_get_max_backlight], max backlight PWM = 5273
>[  166.562467] [drm:intel_panel_actually_set_backlight], set backlight PWM = 5273
>[  166.578479] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 2, prepare: 2, disable: 0
>[  166.578483] [drm:connected_sink_compute_bpp], [CONNECTOR:21:HDMI-A-1] checking for sink bpp constrains
>[  166.578485] [drm:intel_hdmi_compute_config], picking bpc to 8 for HDMI output
>[  166.578487] [drm:intel_hdmi_compute_config], forcing pipe bpc to 24 for HDMI
>[  166.578489] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
>[  166.578490] [drm:intel_dump_pipe_config], [CRTC:5][modeset] config for pipe B
>[  166.578491] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  166.578493] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
>[  166.578495] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  166.578496] [drm:intel_dump_pipe_config], requested mode:
>[  166.578499] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[  166.578500] [drm:intel_dump_pipe_config], adjusted mode:
>[  166.578503] [drm:drm_mode_debug_printmodeline], Modeline 0:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[  166.578505] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  166.578507] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000
>[  166.578508] [drm:intel_dump_pipe_config], ips: 0
>[  166.578512] [drm:intel_ddi_put_crtc_pll], Disabling WRPLL 1
>[  166.578513] ------------[ cut here ]------------
>[  166.578531] WARNING: at drivers/gpu/drm/i915/intel_ddi.c:383 intel_ddi_put_crtc_pll+0x111/0x221 [i915]()
>[  166.578551] Modules linked in: ipv6 dm_mod acpi_cpufreq coretemp kvm_intel kvm joydev iTCO_wdt iTCO_vendor_support snd_hda_codec_realtek acer_wmi microcode pcspkr serio_raw i2c_i801 lpc_ich mfd_core uvcvideo snd_hda_intel videobuf2_vmalloc videobuf2_memops snd_hda_codec videobuf2_core snd_hwdep snd_pcm videodev snd_page_alloc snd_timer snd soundcore battery sparse_keymap rfkill ac wmi i915 video button drm_kms_helper drm broadcom mperf freq_table
>[  166.578554] CPU: 0 PID: 4592 Comm: kworker/u16:13 Not tainted 3.10.0-rc2_drm-intel-next-queued_919991_20130628_+ #4671
>[  166.578555] Hardware name: Acer Aspire V3-772/VA70_HW, BIOS V1.04 04/19/2013
>[  166.578559] Workqueue: events_unbound async_run_entry_fn
>[  166.578563]  ffffffff816de142 0000000000000000 ffffffff8102c67d 0000000000000046
>[  166.578565]  0000000000000000 ffff8801553cc000 ffff8801553cc000 ffff880158bb6000
>[  166.578567]  0000000000202418 0000000000000001 ffffffffa0093e79 ffff8801553cc000
>[  166.578567] Call Trace:
>[  166.578573]  [<ffffffff816de142>] ? dump_stack+0xd/0x17
>[  166.578576]  [<ffffffff8102c67d>] ? warn_slowpath_common+0x5f/0x77
>[  166.578585]  [<ffffffffa0093e79>] ? intel_ddi_put_crtc_pll+0x111/0x221 [i915]
>[  166.578593]  [<ffffffffa0093fca>] ? intel_ddi_pll_mode_set+0x41/0x7cf [i915]
>[  166.578595]  [<ffffffff81048da5>] ? up+0xb/0x36
>[  166.578598]  [<ffffffff8102cfbd>] ? console_trylock+0x28/0x47
>[  166.578605]  [<ffffffffa006b5e3>] ? ivybridge_enable_vblank+0x16/0x5b [i915]
>[  166.578612]  [<ffffffffa0016ebd>] ? drm_vblank_get+0x20f/0x220 [drm]
>[  166.578621]  [<ffffffffa008a775>] ? haswell_crtc_mode_set+0x3c/0x2da [i915]
>[  166.578630]  [<ffffffffa008c828>] ? __intel_set_mode+0xd30/0xf4e [i915]
>[  166.578639]  [<ffffffffa008fe74>] ? intel_modeset_setup_hw_state+0x714/0x84e [i915]
>[  166.578642]  [<ffffffff816e0d38>] ? mutex_lock+0xd/0x2d
>[  166.578647]  [<ffffffffa0065203>] ? __i915_drm_thaw+0x9e/0x188 [i915]
>[  166.578651]  [<ffffffff812ce5f1>] ? pci_pm_restore+0x7b/0x7b
>[  166.578658]  [<ffffffffa00655ed>] ? i915_resume+0x7d/0x9f [i915]
>[  166.578661]  [<ffffffff812ce645>] ? pci_pm_resume+0x54/0x7b
>[  166.578664]  [<ffffffff813534bf>] ? dpm_run_callback.isra.11+0x24/0x52
>[  166.578667]  [<ffffffff8135400f>] ? device_resume+0x109/0x14a
>[  166.578669]  [<ffffffff81354064>] ? async_resume+0x14/0x38
>[  166.578671]  [<ffffffff81049aef>] ? async_run_entry_fn+0x55/0x10b
>[  166.578674]  [<ffffffff8104075c>] ? process_one_work+0x1c5/0x2df
>[  166.578677]  [<ffffffff81040cb3>] ? worker_thread+0x1c7/0x2bc
>[  166.578679]  [<ffffffff81040aec>] ? rescuer_thread+0x251/0x251
>[  166.578682]  [<ffffffff810451ca>] ? kthread+0xad/0xb5
>[  166.578684]  [<ffffffff8104511d>] ? kthread_freezable_should_stop+0x40/0x40
>[  166.578687]  [<ffffffff816e7d6c>] ? ret_from_fork+0x7c/0xb0
>[  166.578689]  [<ffffffff8104511d>] ? kthread_freezable_should_stop+0x40/0x40
>[  166.578690] ---[ end trace 5b850c921f18f717 ]---
>[  166.578692] [drm:intel_ddi_pll_mode_set], Using WRPLL 1 on pipe B
>[  166.580811] [drm:intel_ddi_calculate_wrpll], WRPLL: 148500000Hz refresh rate with p=6, n2=33 r2=20
>[  166.580844] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 7680
>[  166.580847] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[  166.580854] [drm:intel_crtc_mode_set], [ENCODER:19:TMDS-19] set [MODE:0:1920x1080]
>[  166.580855] [drm:intel_ddi_mode_set], Preparing DDI mode on port C, pipe B
>[  166.580856] [drm:intel_ddi_mode_set], HDMI audio on pipe B on DDI
>[  166.580857] [drm:intel_ddi_mode_set], HDMI audio: write eld information
>[  166.580860] [drm:intel_write_eld], ELD on [CONNECTOR:21:HDMI-A-1], [ENCODER:19:TMDS-19]
>[  166.580861] [drm:haswell_write_eld], HDMI: Haswell Audio initialize....
>[  166.580862] [drm:haswell_write_eld], HDMI audio: enable codec
>[  166.632549] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  166.632550] [drm:haswell_write_eld], HDMI audio: pin eld vld status=0x      40
>[  166.632552] [drm:haswell_write_eld], HDMI audio: eld vld status=0x      50
>[  166.632553] [drm:haswell_write_eld], HDMI audio: audio conf: 0x  70fa60
>[  166.632554] [drm:haswell_write_eld], ELD on pipe B
>[  166.632557] [drm:haswell_write_eld], port num:0
>[  166.632558] [drm:haswell_write_eld], ELD size 8
>[  166.684582] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  166.736633] [drm:ironlake_wait_for_vblank], vblank wait timed out
>[  166.736635] [drm:intel_update_fbc], more than one pipe active, disabling compression
>[  166.738638] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  166.738642] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
>[  166.738646] [drm:intel_connector_check_state], [CONNECTOR:21:HDMI-A-1]
>[  166.738648] [drm:check_encoder_state], [ENCODER:10:DAC-10]
>[  166.738650] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
>[  166.738652] [drm:check_encoder_state], [ENCODER:19:TMDS-19]
>[  166.738653] [drm:check_crtc_state], [CRTC:3]
>[  166.738657] [drm:check_crtc_state], [CRTC:5]
>[  166.738660] [drm:check_crtc_state], [CRTC:7]
>[  166.738665] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
>[  166.738670] [drm:intel_resume_hotplug], running encoder hotplug functions
>[  166.739135] [drm:intel_dp_get_dpcd], DPCD: 11 0a 81 01 00 00 01 00 02 00 00 00 00 0b 00
>[  166.739429] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
>[  166.748670] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[  166.748672] [drm:intel_crt_detect], CRT not detected via hotplug
>[  166.748845] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  166.748846] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  166.748848] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  166.748850] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  166.749180] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  166.749181] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  166.749182] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  166.749184] [drm:drm_helper_hpd_irq_event], [CONNECTOR:9:VGA-1] status updated from unknown to disconnected
>[  166.752083] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  166.756545] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  166.760546] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  166.761660] [drm:drm_helper_hpd_irq_event], [CONNECTOR:20:DP-1] status updated from unknown to disconnected
>[  166.786525] [drm:drm_detect_monitor_audio], Monitor has basic audio support
>[  166.786527] [drm:drm_helper_hpd_irq_event], [CONNECTOR:21:HDMI-A-1] status updated from unknown to connected
>[  166.786545] [drm:drm_fb_helper_hotplug_event], 
>[  166.786547] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1]
>[  166.786555] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  166.786558] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes :
>[  166.786562] [drm:drm_mode_debug_printmodeline], Modeline 22:"1600x900" 60 101700 1600 1648 1680 1824 900 903 908 928 0x48 0xa
>[  166.786564] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
>[  166.786566] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
>[  166.786567] [drm:intel_crt_detect], CRT not detected via hotplug
>[  166.786719] [drm:gmbus_xfer], GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
>[  166.786721] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  166.786722] [drm:intel_crt_get_edid], CRT GMBUS EDID read failed, retry using GPIO bit-banging
>[  166.786723] [drm:intel_gmbus_force_bit], enabling bit-banging on i915 gmbus vga. force bit now 1
>[  166.787054] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
>[  166.787055] [drm:intel_gmbus_force_bit], disabling bit-banging on i915 gmbus vga. force bit now 0
>[  166.787057] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
>[  166.787058] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
>[  166.787060] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1]
>[  166.789955] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  166.794608] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  166.798586] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x7145004a
>[  166.799699] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:20:DP-1] disconnected
>[  166.799701] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1]
>[  166.824578] [drm:drm_detect_monitor_audio], Monitor has basic audio support
>[  166.849495] [drm:drm_edid_to_eld], ELD monitor HP 2309
>[  166.849497] [drm:parse_hdmi_vsdb], HDMI: DVI dual 0, max TMDS clock 0, latency present 0 0, video latency 0 0, audio latency 0 0
>[  166.849498] [drm:drm_edid_to_eld], ELD size 8, SAD count 1
>[  166.849508] [drm:drm_mode_debug_printmodeline], Modeline 31:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
>[  166.849509] [drm:drm_mode_prune_invalid], Not using 1600x1200 mode 12
>[  166.849513] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:21:HDMI-A-1] probed modes :
>[  166.849515] [drm:drm_mode_debug_printmodeline], Modeline 42:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
>[  166.849517] [drm:drm_mode_debug_printmodeline], Modeline 43:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
>[  166.849519] [drm:drm_mode_debug_printmodeline], Modeline 32:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
>[  166.849520] [drm:drm_mode_debug_printmodeline], Modeline 29:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
>[  166.849522] [drm:drm_mode_debug_printmodeline], Modeline 30:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
>[  166.849524] [drm:drm_mode_debug_printmodeline], Modeline 28:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
>[  166.849526] [drm:drm_mode_debug_printmodeline], Modeline 41:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
>[  166.849528] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
>[  166.849530] [drm:drm_mode_debug_printmodeline], Modeline 36:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
>[  166.849531] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
>[  166.849533] [drm:drm_mode_debug_printmodeline], Modeline 40:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
>[  166.849535] [drm:drm_mode_debug_printmodeline], Modeline 38:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
>[  166.849537] [drm:drm_mode_debug_printmodeline], Modeline 34:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
>[  166.849538] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
>[  166.849540] [drm:drm_mode_debug_printmodeline], Modeline 35:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
>[  166.849541] [drm:drm_setup_crtcs], 
>[  166.849543] [drm:drm_enable_connectors], connector 12 enabled? yes
>[  166.849544] [drm:drm_enable_connectors], connector 9 enabled? no
>[  166.849545] [drm:drm_enable_connectors], connector 20 enabled? no
>[  166.849545] [drm:drm_enable_connectors], connector 21 enabled? yes
>[  166.849547] [drm:drm_target_preferred], looking for cmdline mode on connector 12
>[  166.849548] [drm:drm_target_preferred], looking for preferred mode on connector 12
>[  166.849549] [drm:drm_target_preferred], found mode 1600x900
>[  166.849550] [drm:drm_target_preferred], looking for cmdline mode on connector 21
>[  166.849550] [drm:drm_target_preferred], looking for preferred mode on connector 21
>[  166.849551] [drm:drm_target_preferred], found mode 1920x1080
>[  166.849552] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[  166.849555] [drm:drm_setup_crtcs], desired mode 1600x900 set on crtc 3
>[  166.849556] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 5
>[  166.849559] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[  166.849562] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  166.849563] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[  166.849565] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[  166.849566] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  166.849567] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[  166.849568] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[  166.849570] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  166.849571] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[  166.850911] [drm:intel_crtc_set_config], [CRTC:3] [FB:25] #connectors=1 (x y) (0 0)
>[  166.850913] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  166.850915] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[  166.850916] [drm:intel_crtc_set_config], [CRTC:5] [FB:25] #connectors=1 (x y) (0 0)
>[  166.850917] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
>[  166.850918] [drm:intel_modeset_stage_output_state], [CONNECTOR:21:HDMI-A-1] to [CRTC:5]
>[  167.882903] [drm:intel_enable_rc6], Haswell: only RC6 available
>[  167.882904] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  167.886808] [drm:gen6_enable_rps], Overclocking supported. Max: 1150MHz, Overclock max: 1150MHz
>[  168.577506] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>[  168.742089] ata1.00: configured for UDMA/133
>[  168.742157] sd 0:0:0:0: [sda] Starting disk
>[  168.759637] PM: resume of devices complete after 2832.784 msecs
>[  168.780620] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  168.780622] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  168.822198] PM: Finishing wakeup.
>[  168.822372] Restarting tasks ... done.
>[  168.824141] video LNXVIDEO:00: Restoring backlight state
>[  168.825288] video LNXVIDEO:01: Restoring backlight state
>[  168.980174] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  168.981286] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  169.180386] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  169.181540] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  169.381027] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  169.382225] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  169.580799] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  169.581982] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
>[  169.780992] atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
>[  169.782096] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.

Actions: View

Attachments on bug 66296: 81609 | 81610

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.