Attachment 90296 Details for Bug 72211 – dmesg of S3 resonse time with eDP

dmesg of S3 resonse time with eDP

dmesg_responsetime_hswu22_eDP_20131205_vdd-rework.txt (text/plain), 121.77 KB, created by Qingshuai Tian on 2013-12-05 09:33:39 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Qingshuai Tian

Created: 2013-12-05 09:33:39 UTC

Size: 121.77 KB

patch

obsolete

>[    1.634676] initcall genericbl_driver_init+0x0/0x14 returned 0 after 182 usecs
>[    1.634681] calling  vesafb_driver_init+0x0/0x14 @ 1
>[    1.634866] initcall vesafb_driver_init+0x0/0x14 returned 0 after 174 usecs
>[    1.634871] calling  efifb_driver_init+0x0/0x14 @ 1
>[    1.635074] initcall efifb_driver_init+0x0/0x14 returned 0 after 192 usecs
>[    1.635079] calling  acpi_reserve_resources+0x0/0xeb @ 1
>[    1.635104] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 20 usecs
>[    1.635108] calling  acpi_fan_driver_init+0x0/0x12 @ 1
>[    1.635336] initcall acpi_fan_driver_init+0x0/0x12 returned 0 after 216 usecs
>[    1.635342] calling  acpi_processor_driver_init+0x0/0x49 @ 1
>[    1.645332] Monitor-Mwait will be used to enter C-1 state
>[    1.645344] Monitor-Mwait will be used to enter C-2 state
>[    1.645384] ACPI: acpi_idle registered with cpuidle
>[    1.659956] initcall acpi_processor_driver_init+0x0/0x49 returned 0 after 24018 usecs
>[    1.659962] calling  acpi_thermal_init+0x0/0x42 @ 1
>[    1.672501] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.672506] ACPI: Thermal Zone [TZ00] (49 C)
>[    1.672825] initcall acpi_thermal_init+0x0/0x42 returned 0 after 12546 usecs
>[    1.672831] calling  pty_init+0x0/0x20d @ 1
>[    1.673307] initcall pty_init+0x0/0x20d returned 0 after 458 usecs
>[    1.673312] calling  sysrq_init+0x0/0x90 @ 1
>[    1.673338] initcall sysrq_init+0x0/0x90 returned 0 after 20 usecs
>[    1.673342] calling  serial8250_init+0x0/0x143 @ 1
>[    1.673345] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.676894] initcall serial8250_init+0x0/0x143 returned 0 after 3460 usecs
>[    1.676916] calling  serial_pci_driver_init+0x0/0x1b @ 1
>[    1.677187] initcall serial_pci_driver_init+0x0/0x1b returned 0 after 258 usecs
>[    1.677192] calling  hpet_init+0x0/0x65 @ 1
>[    1.678699] initcall hpet_init+0x0/0x65 returned 0 after 1464 usecs
>[    1.678704] calling  nvram_init+0x0/0x7d @ 1
>[    1.679101] Non-volatile memory driver v1.3
>[    1.679107] initcall nvram_init+0x0/0x7d returned 0 after 388 usecs
>[    1.679111] calling  mod_init+0x0/0x4f @ 1
>[    1.679116] initcall mod_init+0x0/0x4f returned -19 after 0 usecs
>[    1.679120] calling  agp_init+0x0/0x29 @ 1
>[    1.679122] Linux agpgart interface v0.103
>[    1.679126] initcall agp_init+0x0/0x29 returned 0 after 2 usecs
>[    1.679130] calling  agp_amd64_mod_init+0x0/0x21 @ 1
>[    1.679716] initcall agp_amd64_mod_init+0x0/0x21 returned -19 after 566 usecs
>[    1.679721] calling  agp_intel_init+0x0/0x2a @ 1
>[    1.679994] initcall agp_intel_init+0x0/0x2a returned 0 after 258 usecs
>[    1.680000] calling  agp_sis_init+0x0/0x2a @ 1
>[    1.680248] initcall agp_sis_init+0x0/0x2a returned 0 after 235 usecs
>[    1.680252] calling  agp_via_init+0x0/0x2a @ 1
>[    1.680464] initcall agp_via_init+0x0/0x2a returned 0 after 200 usecs
>[    1.680468] calling  cn_proc_init+0x0/0x38 @ 1
>[    1.680499] initcall cn_proc_init+0x0/0x38 returned 0 after 26 usecs
>[    1.680505] calling  topology_sysfs_init+0x0/0x5c @ 1
>[    1.680657] initcall topology_sysfs_init+0x0/0x5c returned 0 after 144 usecs
>[    1.680662] calling  brd_init+0x0/0x1a7 @ 1
>[    1.700893] brd: module loaded
>[    1.700903] initcall brd_init+0x0/0x1a7 returned 0 after 19751 usecs
>[    1.700919] calling  mac_hid_init+0x0/0x22 @ 1
>[    1.700943] initcall mac_hid_init+0x0/0x22 returned 0 after 18 usecs
>[    1.700945] calling  scsi_tgt_init+0x0/0x8f @ 1
>[    1.701478] initcall scsi_tgt_init+0x0/0x8f returned 0 after 516 usecs
>[    1.701482] calling  raid_init+0x0/0x12 @ 1
>[    1.701657] initcall raid_init+0x0/0x12 returned 0 after 167 usecs
>[    1.701661] calling  spi_transport_init+0x0/0x76 @ 1
>[    1.702074] initcall spi_transport_init+0x0/0x76 returned 0 after 398 usecs
>[    1.702077] calling  fc_transport_init+0x0/0x89 @ 1
>[    1.702784] initcall fc_transport_init+0x0/0x89 returned 0 after 686 usecs
>[    1.702788] calling  iscsi_transport_init+0x0/0x1ba @ 1
>[    1.702790] Loading iSCSI transport class v2.0-870.
>[    1.704178] initcall iscsi_transport_init+0x0/0x1ba returned 0 after 1351 usecs
>[    1.704183] calling  sas_transport_init+0x0/0xbf @ 1
>[    1.705212] initcall sas_transport_init+0x0/0xbf returned 0 after 998 usecs
>[    1.705215] calling  sas_class_init+0x0/0x34 @ 1
>[    1.705238] initcall sas_class_init+0x0/0x34 returned 0 after 19 usecs
>[    1.705241] calling  srp_transport_init+0x0/0x38 @ 1
>[    1.705577] initcall srp_transport_init+0x0/0x38 returned 0 after 324 usecs
>[    1.705581] calling  iscsi_sw_tcp_init+0x0/0x42 @ 1
>[    1.705896] iscsi: registered transport (tcp)
>[    1.705901] initcall iscsi_sw_tcp_init+0x0/0x42 returned 0 after 308 usecs
>[    1.705903] calling  blogic_init+0x0/0xfe3 @ 1
>[    1.706021] initcall blogic_init+0x0/0xfe3 returned 0 after 111 usecs
>[    1.706027] calling  arcmsr_module_init+0x0/0x20 @ 1
>[    1.706292] initcall arcmsr_module_init+0x0/0x20 returned 0 after 253 usecs
>[    1.706296] calling  ahc_linux_init+0x0/0x66 @ 1
>[    1.706552] initcall ahc_linux_init+0x0/0x66 returned 0 after 246 usecs
>[    1.706555] calling  ahd_linux_init+0x0/0x7c @ 1
>[    1.706811] initcall ahd_linux_init+0x0/0x7c returned 0 after 245 usecs
>[    1.706814] calling  aac_init+0x0/0x79 @ 1
>[    1.706817] Adaptec aacraid driver 1.2-0[30200]-ms
>[    1.707143] initcall aac_init+0x0/0x79 returned 0 after 316 usecs
>[    1.707146] calling  init_this_scsi_driver+0x0/0xd9 @ 1
>[    1.707299] initcall init_this_scsi_driver+0x0/0xd9 returned -19 after 145 usecs
>[    1.707302] calling  aic94xx_init+0x0/0x12d @ 1
>[    1.707304] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    1.707605] initcall aic94xx_init+0x0/0x12d returned 0 after 291 usecs
>[    1.707608] calling  ips_module_init+0x0/0x189 @ 1
>[    1.708104] initcall ips_module_init+0x0/0x189 returned -19 after 480 usecs
>[    1.708108] calling  qla1280_init+0x0/0x1b @ 1
>[    1.708358] initcall qla1280_init+0x0/0x1b returned 0 after 239 usecs
>[    1.708361] calling  qla2x00_module_init+0x0/0x20b @ 1
>[    1.708412] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k.
>[    1.708669] initcall qla2x00_module_init+0x0/0x20b returned 0 after 296 usecs
>[    1.708672] calling  qla4xxx_module_init+0x0/0xe1 @ 1
>[    1.708953] iscsi: registered transport (qla4xxx)
>[    1.709209] QLogic iSCSI HBA Driver
>[    1.709214] initcall qla4xxx_module_init+0x0/0xe1 returned 0 after 524 usecs
>[    1.709217] calling  sym2_init+0x0/0xf9 @ 1
>[    1.709468] initcall sym2_init+0x0/0xf9 returned 0 after 241 usecs
>[    1.709471] calling  dc395x_module_init+0x0/0x1b @ 1
>[    1.709680] initcall dc395x_module_init+0x0/0x1b returned 0 after 199 usecs
>[    1.709683] calling  dc390_module_init+0x0/0x99 @ 1
>[    1.709685] DC390: clustering now enabled by default. If you get problems load
>[    1.709687]        with "disable_clustering=1" and report to maintainers
>[    1.710069] initcall dc390_module_init+0x0/0x99 returned 0 after 370 usecs
>[    1.710075] calling  atp870u_init+0x0/0x1b @ 1
>[    1.710356] initcall atp870u_init+0x0/0x1b returned 0 after 268 usecs
>[    1.710360] calling  gdth_init+0x0/0xfd @ 1
>[    1.710362] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    1.710626] initcall gdth_init+0x0/0xfd returned 0 after 252 usecs
>[    1.710632] calling  initio_init_driver+0x0/0x1b @ 1
>[    1.710869] initcall initio_init_driver+0x0/0x1b returned 0 after 226 usecs
>[    1.710875] calling  inia100_init+0x0/0x1b @ 1
>[    1.711115] initcall inia100_init+0x0/0x1b returned 0 after 228 usecs
>[    1.711121] calling  hptiop_module_init+0x0/0x37 @ 1
>[    1.711125] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    1.711341] initcall hptiop_module_init+0x0/0x37 returned 0 after 208 usecs
>[    1.711345] calling  stex_init+0x0/0x30 @ 1
>[    1.711349] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    1.711599] initcall stex_init+0x0/0x30 returned 0 after 242 usecs
>[    1.711604] calling  mvs_init+0x0/0x9f @ 1
>[    1.711883] initcall mvs_init+0x0/0x9f returned 0 after 266 usecs
>[    1.711888] calling  init_st+0x0/0x170 @ 1
>[    1.711893] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    1.712302] initcall init_st+0x0/0x170 returned 0 after 398 usecs
>[    1.712306] calling  init_osst+0x0/0x148 @ 1
>[    1.712309] osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    1.712688] initcall init_osst+0x0/0x148 returned 0 after 367 usecs
>[    1.712692] calling  init_sd+0x0/0x167 @ 1
>[    1.713229] initcall init_sd+0x0/0x167 returned 0 after 519 usecs
>[    1.713235] calling  init_sr+0x0/0x42 @ 1
>[    1.713430] initcall init_sr+0x0/0x42 returned 0 after 185 usecs
>[    1.713435] calling  init_sg+0x0/0x120 @ 1
>[    1.713737] initcall init_sg+0x0/0x120 returned 0 after 288 usecs
>[    1.713740] calling  init_ch_module+0x0/0xae @ 1
>[    1.713742] SCSI Media Changer driver v0.25 
>[    1.714136] initcall init_ch_module+0x0/0xae returned 0 after 381 usecs
>[    1.714142] calling  ahci_pci_driver_init+0x0/0x1b @ 1
>[    1.714214] ahci 0000:00:1f.2: version 3.0
>[    1.716291] ahci 0000:00:1f.2: irq 59 for MSI/MSI-X
>[    1.727012] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode
>[    1.727018] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    1.732809] scsi0 : ahci
>[    1.734038] scsi1 : ahci
>[    1.735029] scsi2 : ahci
>[    1.735857] ata1: SATA max UDMA/133 abar m2048@0xb251b000 port 0xb251b100 irq 59
>[    1.735861] ata2: SATA max UDMA/133 abar m2048@0xb251b000 port 0xb251b180 irq 59
>[    1.735863] ata3: DUMMY
>[    1.735984] calling  1_async_port_probe+0x0/0x50 @ 6
>[    1.736062] calling  2_async_port_probe+0x0/0x50 @ 28
>[    1.736184] calling  3_async_port_probe+0x0/0x50 @ 1000
>[    1.736263] async_waiting @ 1000
>[    1.736462] initcall ahci_pci_driver_init+0x0/0x1b returned 0 after 21781 usecs
>[    1.736467] calling  inic_pci_driver_init+0x0/0x1b @ 1
>[    1.736727] initcall inic_pci_driver_init+0x0/0x1b returned 0 after 248 usecs
>[    1.736732] calling  sil24_pci_driver_init+0x0/0x1b @ 1
>[    1.737011] initcall sil24_pci_driver_init+0x0/0x1b returned 0 after 267 usecs
>[    1.737015] calling  qs_ata_pci_driver_init+0x0/0x1b @ 1
>[    1.737270] initcall qs_ata_pci_driver_init+0x0/0x1b returned 0 after 243 usecs
>[    1.737275] calling  pdc_sata_pci_driver_init+0x0/0x1b @ 1
>[    1.737525] initcall pdc_sata_pci_driver_init+0x0/0x1b returned 0 after 237 usecs
>[    1.737530] calling  piix_init+0x0/0x29 @ 1
>[    1.737783] initcall piix_init+0x0/0x29 returned 0 after 240 usecs
>[    1.737788] calling  mv_init+0x0/0x43 @ 1
>[    1.738303] initcall mv_init+0x0/0x43 returned 0 after 496 usecs
>[    1.738309] calling  nv_pci_driver_init+0x0/0x1b @ 1
>[    1.738557] initcall nv_pci_driver_init+0x0/0x1b returned 0 after 235 usecs
>[    1.738562] calling  pdc_ata_pci_driver_init+0x0/0x1b @ 1
>[    1.738811] initcall pdc_ata_pci_driver_init+0x0/0x1b returned 0 after 237 usecs
>[    1.738816] calling  sil_pci_driver_init+0x0/0x1b @ 1
>[    1.739092] initcall sil_pci_driver_init+0x0/0x1b returned 0 after 263 usecs
>[    1.739098] calling  sis_pci_driver_init+0x0/0x1b @ 1
>[    1.739350] initcall sis_pci_driver_init+0x0/0x1b returned 0 after 240 usecs
>[    1.739355] calling  k2_sata_pci_driver_init+0x0/0x1b @ 1
>[    1.739602] initcall k2_sata_pci_driver_init+0x0/0x1b returned 0 after 235 usecs
>[    1.739608] calling  uli_pci_driver_init+0x0/0x1b @ 1
>[    1.739853] initcall uli_pci_driver_init+0x0/0x1b returned 0 after 234 usecs
>[    1.739859] calling  svia_pci_driver_init+0x0/0x1b @ 1
>[    1.740124] initcall svia_pci_driver_init+0x0/0x1b returned 0 after 253 usecs
>[    1.740130] calling  vsc_sata_pci_driver_init+0x0/0x1b @ 1
>[    1.740377] initcall vsc_sata_pci_driver_init+0x0/0x1b returned 0 after 235 usecs
>[    1.740382] calling  ali_init+0x0/0x4a @ 1
>[    1.740639] initcall ali_init+0x0/0x4a returned 0 after 244 usecs
>[    1.740644] calling  amd_pci_driver_init+0x0/0x1b @ 1
>[    1.740888] initcall amd_pci_driver_init+0x0/0x1b returned 0 after 232 usecs
>[    1.740893] calling  artop_pci_driver_init+0x0/0x1b @ 1
>[    1.741256] initcall artop_pci_driver_init+0x0/0x1b returned 0 after 348 usecs
>[    1.741260] calling  atiixp_pci_driver_init+0x0/0x1b @ 1
>[    1.741567] initcall atiixp_pci_driver_init+0x0/0x1b returned 0 after 295 usecs
>[    1.741571] calling  atp867x_driver_init+0x0/0x1b @ 1
>[    1.741873] initcall atp867x_driver_init+0x0/0x1b returned 0 after 290 usecs
>[    1.741876] calling  cmd64x_pci_driver_init+0x0/0x1b @ 1
>[    1.742177] initcall cmd64x_pci_driver_init+0x0/0x1b returned 0 after 289 usecs
>[    1.742181] calling  cs5520_pci_driver_init+0x0/0x1b @ 1
>[    1.742452] initcall cs5520_pci_driver_init+0x0/0x1b returned 0 after 260 usecs
>[    1.742456] calling  cs5530_pci_driver_init+0x0/0x1b @ 1
>[    1.742721] initcall cs5530_pci_driver_init+0x0/0x1b returned 0 after 254 usecs
>[    1.742725] calling  cy82c693_pci_driver_init+0x0/0x1b @ 1
>[    1.743017] initcall cy82c693_pci_driver_init+0x0/0x1b returned 0 after 280 usecs
>[    1.743021] calling  efar_pci_driver_init+0x0/0x1b @ 1
>[    1.743354] initcall efar_pci_driver_init+0x0/0x1b returned 0 after 320 usecs
>[    1.743357] calling  hpt36x_pci_driver_init+0x0/0x1b @ 1
>[    1.743635] initcall hpt36x_pci_driver_init+0x0/0x1b returned 0 after 266 usecs
>[    1.743638] calling  hpt37x_pci_driver_init+0x0/0x1b @ 1
>[    1.743900] initcall hpt37x_pci_driver_init+0x0/0x1b returned 0 after 249 usecs
>[    1.743905] calling  hpt3x2n_pci_driver_init+0x0/0x1b @ 1
>[    1.744177] initcall hpt3x2n_pci_driver_init+0x0/0x1b returned 0 after 259 usecs
>[    1.744182] calling  hpt3x3_pci_driver_init+0x0/0x1b @ 1
>[    1.744434] initcall hpt3x3_pci_driver_init+0x0/0x1b returned 0 after 240 usecs
>[    1.744439] calling  it8213_pci_driver_init+0x0/0x1b @ 1
>[    1.744687] initcall it8213_pci_driver_init+0x0/0x1b returned 0 after 235 usecs
>[    1.744692] calling  it821x_pci_driver_init+0x0/0x1b @ 1
>[    1.745023] initcall it821x_pci_driver_init+0x0/0x1b returned 0 after 317 usecs
>[    1.745029] calling  jmicron_pci_driver_init+0x0/0x1b @ 1
>[    1.745363] initcall jmicron_pci_driver_init+0x0/0x1b returned 0 after 319 usecs
>[    1.745369] calling  marvell_pci_driver_init+0x0/0x1b @ 1
>[    1.745650] initcall marvell_pci_driver_init+0x0/0x1b returned 0 after 268 usecs
>[    1.745656] calling  netcell_pci_driver_init+0x0/0x1b @ 1
>[    1.745908] initcall netcell_pci_driver_init+0x0/0x1b returned 0 after 240 usecs
>[    1.745913] calling  ninja32_pci_driver_init+0x0/0x1b @ 1
>[    1.746185] initcall ninja32_pci_driver_init+0x0/0x1b returned 0 after 259 usecs
>[    1.746190] calling  ns87415_pci_driver_init+0x0/0x1b @ 1
>[    1.746445] initcall ns87415_pci_driver_init+0x0/0x1b returned 0 after 243 usecs
>[    1.746450] calling  oldpiix_pci_driver_init+0x0/0x1b @ 1
>[    1.746701] initcall oldpiix_pci_driver_init+0x0/0x1b returned 0 after 238 usecs
>[    1.746706] calling  optidma_pci_driver_init+0x0/0x1b @ 1
>[    1.746969] initcall optidma_pci_driver_init+0x0/0x1b returned 0 after 251 usecs
>[    1.746974] calling  pdc2027x_pci_driver_init+0x0/0x1b @ 1
>[    1.747232] initcall pdc2027x_pci_driver_init+0x0/0x1b returned 0 after 245 usecs
>[    1.747237] calling  pdc202xx_pci_driver_init+0x0/0x1b @ 1
>[    1.747502] initcall pdc202xx_pci_driver_init+0x0/0x1b returned 0 after 252 usecs
>[    1.747507] calling  serverworks_pci_driver_init+0x0/0x1b @ 1
>[    1.747759] initcall serverworks_pci_driver_init+0x0/0x1b returned 0 after 240 usecs
>[    1.747764] calling  sil680_pci_driver_init+0x0/0x1b @ 1
>[    1.748039] initcall sil680_pci_driver_init+0x0/0x1b returned 0 after 262 usecs
>[    1.748044] calling  sis_pci_driver_init+0x0/0x1b @ 1
>[    1.748298] initcall sis_pci_driver_init+0x0/0x1b returned 0 after 242 usecs
>[    1.748303] calling  triflex_pci_driver_init+0x0/0x1b @ 1
>[    1.748554] initcall triflex_pci_driver_init+0x0/0x1b returned 0 after 238 usecs
>[    1.748559] calling  via_pci_driver_init+0x0/0x1b @ 1
>[    1.748807] initcall via_pci_driver_init+0x0/0x1b returned 0 after 236 usecs
>[    1.748812] calling  sl82c105_pci_driver_init+0x0/0x1b @ 1
>[    1.749089] initcall sl82c105_pci_driver_init+0x0/0x1b returned 0 after 264 usecs
>[    1.749094] calling  cmd640_pci_driver_init+0x0/0x1b @ 1
>[    1.749353] initcall cmd640_pci_driver_init+0x0/0x1b returned 0 after 246 usecs
>[    1.749358] calling  mpiix_pci_driver_init+0x0/0x1b @ 1
>[    1.749602] initcall mpiix_pci_driver_init+0x0/0x1b returned 0 after 232 usecs
>[    1.749607] calling  ns87410_pci_driver_init+0x0/0x1b @ 1
>[    1.749861] initcall ns87410_pci_driver_init+0x0/0x1b returned 0 after 242 usecs
>[    1.749866] calling  opti_pci_driver_init+0x0/0x1b @ 1
>[    1.750135] initcall opti_pci_driver_init+0x0/0x1b returned 0 after 256 usecs
>[    1.750140] calling  pcmcia_driver_init+0x0/0x12 @ 1
>[    1.750353] initcall pcmcia_driver_init+0x0/0x12 returned 0 after 202 usecs
>[    1.750357] calling  pacpi_pci_driver_init+0x0/0x1b @ 1
>[    1.750613] initcall pacpi_pci_driver_init+0x0/0x1b returned 0 after 244 usecs
>[    1.750618] calling  ata_generic_pci_driver_init+0x0/0x1b @ 1
>[    1.750870] initcall ata_generic_pci_driver_init+0x0/0x1b returned 0 after 239 usecs
>[    1.750875] calling  net_olddevs_init+0x0/0x5b @ 1
>[    1.750882] initcall net_olddevs_init+0x0/0x5b returned 0 after 2 usecs
>[    1.750885] calling  b44_init+0x0/0x44 @ 1
>[    1.751304] initcall b44_init+0x0/0x44 returned 0 after 403 usecs
>[    1.751309] calling  bnx2_pci_driver_init+0x0/0x1b @ 1
>[    1.751559] initcall bnx2_pci_driver_init+0x0/0x1b returned 0 after 238 usecs
>[    1.751565] calling  cnic_init+0x0/0x87 @ 1
>[    1.751568] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013)
>[    1.751718] initcall cnic_init+0x0/0x87 returned 0 after 144 usecs
>[    1.751723] calling  bnx2x_init+0x0/0x9c @ 1
>[    1.751727] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
>[    1.752295] initcall bnx2x_init+0x0/0x9c returned 0 after 551 usecs
>[    1.752301] calling  tg3_driver_init+0x0/0x1b @ 1
>[    1.752554] initcall tg3_driver_init+0x0/0x1b returned 0 after 240 usecs
>[    1.752559] calling  e100_init_module+0x0/0x5d @ 1
>[    1.752563] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    1.752565] e100: Copyright(c) 1999-2006 Intel Corporation
>[    1.752815] initcall e100_init_module+0x0/0x5d returned 0 after 243 usecs
>[    1.752820] calling  e1000_init_module+0x0/0x82 @ 1
>[    1.752824] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    1.752826] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    1.753104] initcall e1000_init_module+0x0/0x82 returned 0 after 270 usecs
>[    1.753110] calling  e1000_init_module+0x0/0x3e @ 1
>[    1.753113] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    1.753115] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
>[    1.753372] initcall e1000_init_module+0x0/0x3e returned 0 after 250 usecs
>[    1.753378] calling  igb_init_module+0x0/0x4c @ 1
>[    1.753381] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    1.753383] igb: Copyright (c) 2007-2013 Intel Corporation.
>[    1.753633] initcall igb_init_module+0x0/0x4c returned 0 after 242 usecs
>[    1.753638] calling  zd1201_usb_init+0x0/0x1b @ 1
>[    1.753884] usbcore: registered new interface driver zd1201
>[    1.753890] initcall zd1201_usb_init+0x0/0x1b returned 0 after 240 usecs
>[    1.753893] calling  catc_driver_init+0x0/0x1b @ 1
>[    1.754115] usbcore: registered new interface driver catc
>[    1.754120] initcall catc_driver_init+0x0/0x1b returned 0 after 218 usecs
>[    1.754124] calling  kaweth_driver_init+0x0/0x1b @ 1
>[    1.754322] usbcore: registered new interface driver kaweth
>[    1.754327] initcall kaweth_driver_init+0x0/0x1b returned 0 after 194 usecs
>[    1.754331] calling  pegasus_init+0x0/0x16c @ 1
>[    1.754333] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.754540] usbcore: registered new interface driver pegasus
>[    1.754546] initcall pegasus_init+0x0/0x16c returned 0 after 205 usecs
>[    1.754549] calling  rtl8150_driver_init+0x0/0x1b @ 1
>[    1.754743] usbcore: registered new interface driver rtl8150
>[    1.754748] initcall rtl8150_driver_init+0x0/0x1b returned 0 after 190 usecs
>[    1.754751] calling  asix_driver_init+0x0/0x1b @ 1
>[    1.755061] usbcore: registered new interface driver asix
>[    1.755067] initcall asix_driver_init+0x0/0x1b returned 0 after 304 usecs
>[    1.755070] calling  ax88179_178a_driver_init+0x0/0x1b @ 1
>[    1.755272] usbcore: registered new interface driver ax88179_178a
>[    1.755277] initcall ax88179_178a_driver_init+0x0/0x1b returned 0 after 198 usecs
>[    1.755280] calling  cdc_driver_init+0x0/0x1b @ 1
>[    1.755478] usbcore: registered new interface driver cdc_ether
>[    1.755483] initcall cdc_driver_init+0x0/0x1b returned 0 after 193 usecs
>[    1.755486] calling  r815x_driver_init+0x0/0x1b @ 1
>[    1.755693] usbcore: registered new interface driver r815x
>[    1.755698] initcall r815x_driver_init+0x0/0x1b returned 0 after 203 usecs
>[    1.755701] calling  dm9601_driver_init+0x0/0x1b @ 1
>[    1.755900] usbcore: registered new interface driver dm9601
>[    1.755905] initcall dm9601_driver_init+0x0/0x1b returned 0 after 194 usecs
>[    1.755908] calling  gl620a_driver_init+0x0/0x1b @ 1
>[    1.756127] usbcore: registered new interface driver gl620a
>[    1.756132] initcall gl620a_driver_init+0x0/0x1b returned 0 after 214 usecs
>[    1.756135] calling  net1080_driver_init+0x0/0x1b @ 1
>[    1.756334] usbcore: registered new interface driver net1080
>[    1.756339] initcall net1080_driver_init+0x0/0x1b returned 0 after 194 usecs
>[    1.756342] calling  plusb_driver_init+0x0/0x1b @ 1
>[    1.756542] usbcore: registered new interface driver plusb
>[    1.756547] initcall plusb_driver_init+0x0/0x1b returned 0 after 196 usecs
>[    1.756550] calling  rndis_driver_init+0x0/0x1b @ 1
>[    1.756748] usbcore: registered new interface driver rndis_host
>[    1.756753] initcall rndis_driver_init+0x0/0x1b returned 0 after 193 usecs
>[    1.756756] calling  cdc_subset_driver_init+0x0/0x1b @ 1
>[    1.756971] usbcore: registered new interface driver cdc_subset
>[    1.756977] initcall cdc_subset_driver_init+0x0/0x1b returned 0 after 211 usecs
>[    1.756980] calling  zaurus_driver_init+0x0/0x1b @ 1
>[    1.757179] usbcore: registered new interface driver zaurus
>[    1.757184] initcall zaurus_driver_init+0x0/0x1b returned 0 after 194 usecs
>[    1.757187] calling  mcs7830_driver_init+0x0/0x1b @ 1
>[    1.757391] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.757396] initcall mcs7830_driver_init+0x0/0x1b returned 0 after 199 usecs
>[    1.757400] calling  usbnet_init+0x0/0x2b @ 1
>[    1.757409] initcall usbnet_init+0x0/0x2b returned 0 after 5 usecs
>[    1.757412] calling  cdc_ncm_driver_init+0x0/0x1b @ 1
>[    1.757653] usbcore: registered new interface driver cdc_ncm
>[    1.757658] initcall cdc_ncm_driver_init+0x0/0x1b returned 0 after 236 usecs
>[    1.757661] calling  uio_init+0x0/0xf3 @ 1
>[    1.757854] initcall uio_init+0x0/0xf3 returned 0 after 182 usecs
>[    1.757859] calling  cdrom_init+0x0/0x19 @ 1
>[    1.757889] initcall cdrom_init+0x0/0x19 returned 0 after 24 usecs
>[    1.757892] calling  nonstatic_sysfs_init+0x0/0x12 @ 1
>[    1.757899] initcall nonstatic_sysfs_init+0x0/0x12 returned 0 after 3 usecs
>[    1.757902] calling  yenta_cardbus_driver_init+0x0/0x1b @ 1
>[    1.758184] initcall yenta_cardbus_driver_init+0x0/0x1b returned 0 after 269 usecs
>[    1.758190] calling  mon_init+0x0/0x112 @ 1
>[    1.758833] initcall mon_init+0x0/0x112 returned 0 after 621 usecs
>[    1.758838] calling  ehci_hcd_init+0x0/0x5d @ 1
>[    1.758840] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.758844] initcall ehci_hcd_init+0x0/0x5d returned 0 after 2 usecs
>[    1.758847] calling  ehci_pci_init+0x0/0x69 @ 1
>[    1.758850] ehci-pci: EHCI PCI platform driver
>[    1.761265] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    1.762162] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
>[    1.762214] ehci-pci 0000:00:1d.0: debug port 2
>[    1.766206] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    1.766372] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb251c000
>[    1.772057] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    1.772666] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.772671] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.772674] usb usb1: Product: EHCI Host Controller
>[    1.772677] usb usb1: Manufacturer: Linux 3.13.0-rc1_vdd-rework_9079e9_20131205+ ehci_hcd
>[    1.772679] usb usb1: SerialNumber: 0000:00:1d.0
>[    1.774677] hub 1-0:1.0: USB hub found
>[    1.774802] hub 1-0:1.0: 2 ports detected
>[    1.777582] initcall ehci_pci_init+0x0/0x69 returned 0 after 18279 usecs
>[    1.777588] calling  isp116x_driver_init+0x0/0x14 @ 1
>[    1.777843] initcall isp116x_driver_init+0x0/0x14 returned 0 after 242 usecs
>[    1.777847] calling  ohci_hcd_mod_init+0x0/0x39 @ 1
>[    1.777850] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.777854] initcall ohci_hcd_mod_init+0x0/0x39 returned 0 after 2 usecs
>[    1.777857] calling  ohci_pci_init+0x0/0x69 @ 1
>[    1.777860] ohci-pci: OHCI PCI platform driver
>[    1.778142] initcall ohci_pci_init+0x0/0x69 returned 0 after 273 usecs
>[    1.778147] calling  uhci_hcd_init+0x0/0xca @ 1
>[    1.778149] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.778485] initcall uhci_hcd_init+0x0/0xca returned 0 after 325 usecs
>[    1.778489] calling  xhci_hcd_init+0x0/0x14 @ 1
>[    1.780481] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.781148] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.781393] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.781557] xhci_hcd 0000:00:14.0: irq 60 for MSI/MSI-X
>[    1.782180] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.782184] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.782187] usb usb2: Product: xHCI Host Controller
>[    1.782190] usb usb2: Manufacturer: Linux 3.13.0-rc1_vdd-rework_9079e9_20131205+ xhci_hcd
>[    1.782192] usb usb2: SerialNumber: 0000:00:14.0
>[    1.783722] hub 2-0:1.0: USB hub found
>[    1.783840] hub 2-0:1.0: 9 ports detected
>[    1.837529] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.838175] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    1.838638] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.838642] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.838645] usb usb3: Product: xHCI Host Controller
>[    1.838647] usb usb3: Manufacturer: Linux 3.13.0-rc1_vdd-rework_9079e9_20131205+ xhci_hcd
>[    1.838650] usb usb3: SerialNumber: 0000:00:14.0
>[    1.840364] hub 3-0:1.0: USB hub found
>[    1.840461] hub 3-0:1.0: 4 ports detected
>[    1.867812] initcall xhci_hcd_init+0x0/0x14 returned 0 after 87184 usecs
>[    1.867819] calling  usb_storage_driver_init+0x0/0x1b @ 1
>[    1.868197] usbcore: registered new interface driver usb-storage
>[    1.868206] initcall usb_storage_driver_init+0x0/0x1b returned 0 after 370 usecs
>[    1.868210] calling  i8042_init+0x0/0x3d5 @ 1
>[    1.868868] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2D] at 0x60,0x64 irq 1,12
>[    1.891116] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.891191] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.891932] initcall i8042_init+0x0/0x3d5 returned 0 after 23148 usecs
>[    1.891940] calling  serport_init+0x0/0x2f @ 1
>[    1.891948] initcall serport_init+0x0/0x2f returned 0 after 1 usecs
>[    1.891954] calling  mousedev_init+0x0/0x5c @ 1
>[    1.892620] mousedev: PS/2 mouse device common for all mice
>[    1.892627] initcall mousedev_init+0x0/0x5c returned 0 after 651 usecs
>[    1.892631] calling  evdev_init+0x0/0x12 @ 1
>[    1.892636] initcall evdev_init+0x0/0x12 returned 0 after 1 usecs
>[    1.892639] calling  atkbd_init+0x0/0x27 @ 1
>[    1.892943] initcall atkbd_init+0x0/0x27 returned 0 after 291 usecs
>[    1.892948] calling  psmouse_init+0x0/0x85 @ 1
>[    1.893469] initcall psmouse_init+0x0/0x85 returned 0 after 502 usecs
>[    1.893476] calling  cmos_init+0x0/0x6a @ 1
>[    1.893557] rtc_cmos 00:04: RTC can wake from S4
>[    1.894437] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>[    1.894499] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
>[    1.894737] initcall cmos_init+0x0/0x6a returned 0 after 1224 usecs
>[    1.894742] calling  i2c_dev_init+0x0/0xcf @ 1
>[    1.894744] i2c /dev entries driver
>[    1.895013] initcall i2c_dev_init+0x0/0xcf returned 0 after 259 usecs
>[    1.895019] calling  efivars_sysfs_init+0x0/0x23e @ 1
>[    1.895024] initcall efivars_sysfs_init+0x0/0x23e returned -19 after 0 usecs
>[    1.895028] calling  hid_init+0x0/0x63 @ 1
>[    1.895465] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.895497] initcall hid_init+0x0/0x63 returned 0 after 450 usecs
>[    1.895502] calling  hid_generic_init+0x0/0x1b @ 1
>[    1.895706] initcall hid_generic_init+0x0/0x1b returned 0 after 193 usecs
>[    1.895711] calling  a4_driver_init+0x0/0x1b @ 1
>[    1.895909] initcall a4_driver_init+0x0/0x1b returned 0 after 188 usecs
>[    1.895914] calling  apple_driver_init+0x0/0x1b @ 1
>[    1.896187] initcall apple_driver_init+0x0/0x1b returned 0 after 261 usecs
>[    1.896192] calling  belkin_driver_init+0x0/0x1b @ 1
>[    1.896388] initcall belkin_driver_init+0x0/0x1b returned 0 after 186 usecs
>[    1.896392] calling  ch_driver_init+0x0/0x1b @ 1
>[    1.896582] initcall ch_driver_init+0x0/0x1b returned 0 after 180 usecs
>[    1.896586] calling  ch_driver_init+0x0/0x1b @ 1
>[    1.896777] initcall ch_driver_init+0x0/0x1b returned 0 after 181 usecs
>[    1.896781] calling  cp_driver_init+0x0/0x1b @ 1
>[    1.896975] initcall cp_driver_init+0x0/0x1b returned 0 after 184 usecs
>[    1.896979] calling  ez_driver_init+0x0/0x1b @ 1
>[    1.897183] initcall ez_driver_init+0x0/0x1b returned 0 after 193 usecs
>[    1.897187] calling  gyration_driver_init+0x0/0x1b @ 1
>[    1.897377] initcall gyration_driver_init+0x0/0x1b returned 0 after 180 usecs
>[    1.897381] calling  ks_driver_init+0x0/0x1b @ 1
>[    1.897570] initcall ks_driver_init+0x0/0x1b returned 0 after 180 usecs
>[    1.897574] calling  lg_driver_init+0x0/0x1b @ 1
>[    1.897764] initcall lg_driver_init+0x0/0x1b returned 0 after 180 usecs
>[    1.897768] calling  ms_driver_init+0x0/0x1b @ 1
>[    1.897964] initcall ms_driver_init+0x0/0x1b returned 0 after 187 usecs
>[    1.897968] calling  mr_driver_init+0x0/0x1b @ 1
>[    1.898216] initcall mr_driver_init+0x0/0x1b returned 0 after 237 usecs
>[    1.898221] calling  ntrig_driver_init+0x0/0x1b @ 1
>[    1.898455] initcall ntrig_driver_init+0x0/0x1b returned 0 after 223 usecs
>[    1.898459] calling  pl_driver_init+0x0/0x1b @ 1
>[    1.898653] initcall pl_driver_init+0x0/0x1b returned 0 after 184 usecs
>[    1.898657] calling  pl_driver_init+0x0/0x1b @ 1
>[    1.898847] initcall pl_driver_init+0x0/0x1b returned 0 after 180 usecs
>[    1.898851] calling  samsung_driver_init+0x0/0x1b @ 1
>[    1.899061] initcall samsung_driver_init+0x0/0x1b returned 0 after 199 usecs
>[    1.899065] calling  sony_driver_init+0x0/0x1b @ 1
>[    1.899264] initcall sony_driver_init+0x0/0x1b returned 0 after 188 usecs
>[    1.899268] calling  sp_driver_init+0x0/0x1b @ 1
>[    1.899465] initcall sp_driver_init+0x0/0x1b returned 0 after 187 usecs
>[    1.899469] calling  ts_driver_init+0x0/0x1b @ 1
>[    1.899655] initcall ts_driver_init+0x0/0x1b returned 0 after 176 usecs
>[    1.899659] calling  hid_init+0x0/0x54 @ 1
>[    1.899904] usbcore: registered new interface driver usbhid
>[    1.899906] usbhid: USB HID core driver
>[    1.899911] initcall hid_init+0x0/0x54 returned 0 after 240 usecs
>[    1.899914] calling  sock_diag_init+0x0/0x12 @ 1
>[    1.899946] initcall sock_diag_init+0x0/0x12 returned 0 after 27 usecs
>[    1.899949] calling  flow_cache_init_global+0x0/0x182 @ 1
>[    1.900449] initcall flow_cache_init_global+0x0/0x182 returned 0 after 483 usecs
>[    1.900453] calling  blackhole_module_init+0x0/0x12 @ 1
>[    1.900459] initcall blackhole_module_init+0x0/0x12 returned 0 after 1 usecs
>[    1.900462] calling  sysctl_ipv4_init+0x0/0x80 @ 1
>[    1.900535] initcall sysctl_ipv4_init+0x0/0x80 returned 0 after 67 usecs
>[    1.900539] calling  ipv4_netfilter_init+0x0/0x12 @ 1
>[    1.900566] initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 22 usecs
>[    1.900570] calling  cubictcp_register+0x0/0x59 @ 1
>[    1.900573] TCP: cubic registered
>[    1.900577] initcall cubictcp_register+0x0/0x59 returned 0 after 3 usecs
>[    1.900580] calling  xfrm_user_init+0x0/0x46 @ 1
>[    1.900582] Initializing XFRM netlink socket
>[    1.900622] initcall xfrm_user_init+0x0/0x46 returned 0 after 36 usecs
>[    1.900625] calling  packet_init+0x0/0x42 @ 1
>[    1.900629] NET: Registered protocol family 17
>[    1.900653] initcall packet_init+0x0/0x42 returned 0 after 22 usecs
>[    1.900656] calling  init_rpcsec_gss+0x0/0x68 @ 1
>[    1.900794] initcall init_rpcsec_gss+0x0/0x68 returned 0 after 129 usecs
>[    1.900797] calling  init_dns_resolver+0x0/0xe3 @ 1
>[    1.900827] Key type dns_resolver registered
>[    1.900832] initcall init_dns_resolver+0x0/0xe3 returned 0 after 29 usecs
>[    1.900835] calling  mcheck_init_device+0x0/0xfd @ 1
>[    1.902918] initcall mcheck_init_device+0x0/0xfd returned 0 after 2027 usecs
>[    1.903239] calling  mcheck_debugfs_init+0x0/0x3b @ 1
>[    1.903277] initcall mcheck_debugfs_init+0x0/0x3b returned 0 after 32 usecs
>[    1.903280] calling  severities_debugfs_init+0x0/0x3d @ 1
>[    1.903297] initcall severities_debugfs_init+0x0/0x3d returned 0 after 13 usecs
>[    1.903300] calling  threshold_init_device+0x0/0x45 @ 1
>[    1.903318] initcall threshold_init_device+0x0/0x45 returned 0 after 14 usecs
>[    1.903321] calling  hpet_insert_resource+0x0/0x24 @ 1
>[    1.903327] initcall hpet_insert_resource+0x0/0x24 returned 0 after 2 usecs
>[    1.903330] calling  update_mp_table+0x0/0x439 @ 1
>[    1.903334] initcall update_mp_table+0x0/0x439 returned 0 after 0 usecs
>[    1.903337] calling  lapic_insert_resource+0x0/0x3f @ 1
>[    1.903343] initcall lapic_insert_resource+0x0/0x3f returned 0 after 1 usecs
>[    1.903346] calling  io_apic_bug_finalize+0x0/0x1b @ 1
>[    1.903351] initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs
>[    1.903354] calling  print_ICs+0x0/0x430 @ 1
>[    1.903358] initcall print_ICs+0x0/0x430 returned 0 after 0 usecs
>[    1.903362] calling  check_early_ioremap_leak+0x0/0x50 @ 1
>[    1.903367] initcall check_early_ioremap_leak+0x0/0x50 returned 0 after 0 usecs
>[    1.903371] calling  pat_memtype_list_init+0x0/0x35 @ 1
>[    1.903390] initcall pat_memtype_list_init+0x0/0x35 returned 0 after 14 usecs
>[    1.903395] calling  init_oops_id+0x0/0x37 @ 1
>[    1.903403] initcall init_oops_id+0x0/0x37 returned 0 after 3 usecs
>[    1.903407] calling  sched_init_debug+0x0/0x24 @ 1
>[    1.903424] initcall sched_init_debug+0x0/0x24 returned 0 after 13 usecs
>[    1.903427] calling  pm_qos_power_init+0x0/0x63 @ 1
>[    1.904536] initcall pm_qos_power_init+0x0/0x63 returned 0 after 1076 usecs
>[    1.904540] calling  pm_debugfs_init+0x0/0x24 @ 1
>[    1.904561] initcall pm_debugfs_init+0x0/0x24 returned 0 after 16 usecs
>[    1.904565] calling  printk_late_init+0x0/0x3f @ 1
>[    1.904571] initcall printk_late_init+0x0/0x3f returned 0 after 2 usecs
>[    1.904574] calling  tk_debug_sleep_time_init+0x0/0x3c @ 1
>[    1.904592] initcall tk_debug_sleep_time_init+0x0/0x3c returned 0 after 13 usecs
>[    1.904597] calling  debugfs_kprobe_init+0x0/0x85 @ 1
>[    1.904641] initcall debugfs_kprobe_init+0x0/0x85 returned 0 after 38 usecs
>[    1.904645] calling  taskstats_init+0x0/0x6e @ 1
>[    1.904678] registered taskstats version 1
>[    1.904682] initcall taskstats_init+0x0/0x6e returned 0 after 32 usecs
>[    1.904686] calling  clear_boot_tracer+0x0/0x30 @ 1
>[    1.904691] initcall clear_boot_tracer+0x0/0x30 returned 0 after 0 usecs
>[    1.904695] calling  max_swapfiles_check+0x0/0x8 @ 1
>[    1.904699] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
>[    1.904703] calling  kmemleak_late_init+0x0/0x97 @ 1
>[    1.904859] kmemleak: Kernel memory leak detector initialized
>[    1.904863] kmemleak: Automatic memory scanning thread started
>[    1.904867] initcall kmemleak_late_init+0x0/0x97 returned 0 after 154 usecs
>[    1.904873] calling  init_root_keyring+0x0/0xb @ 1
>[    1.905096] initcall init_root_keyring+0x0/0xb returned 0 after 212 usecs
>[    1.905100] calling  prandom_reseed+0x0/0x49 @ 1
>[    1.905155] initcall prandom_reseed+0x0/0x49 returned 0 after 50 usecs
>[    1.905159] calling  pci_resource_alignment_sysfs_init+0x0/0x22 @ 1
>[    1.905169] initcall pci_resource_alignment_sysfs_init+0x0/0x22 returned 0 after 6 usecs
>[    1.905172] calling  pci_sysfs_init+0x0/0x4b @ 1
>[    1.909333] initcall pci_sysfs_init+0x0/0x4b returned 0 after 4056 usecs
>[    1.909338] calling  deferred_probe_initcall+0x0/0x72 @ 1
>[    1.909614] initcall deferred_probe_initcall+0x0/0x72 returned 0 after 264 usecs
>[    1.909619] calling  late_resume_init+0x0/0xef @ 1
>[    1.909622]   Magic number: 9:551:994
>[    1.909680] initcall late_resume_init+0x0/0xef returned 0 after 54 usecs
>[    1.909684] calling  firmware_memmap_init+0x0/0x33 @ 1
>[    1.910257] initcall firmware_memmap_init+0x0/0x33 returned 0 after 553 usecs
>[    1.910261] calling  pci_mmcfg_late_insert_resources+0x0/0x4b @ 1
>[    1.910267] initcall pci_mmcfg_late_insert_resources+0x0/0x4b returned 0 after 2 usecs
>[    1.910270] calling  tcp_congestion_default+0x0/0x12 @ 1
>[    1.910276] initcall tcp_congestion_default+0x0/0x12 returned 0 after 1 usecs
>[    1.910282] calling  software_resume+0x0/0x28d @ 1
>[    1.910303] PM: Hibernation image not present or could not be loaded.
>[    1.910308] initcall software_resume+0x0/0x28d returned -2 after 20 usecs
>[    1.910802] async_waiting @ 1
>[    1.911891] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    2.041121] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    2.041153] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    2.045214] ata1.00: ATA-8: LITEONIT LSS-16L6G, DS46201, max UDMA/133
>[    2.045221] ata1.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>[    2.045327] ata2.00: ATA-9: WDC WD5000LPCX-24C6HT0, 01.01A01, max UDMA/133
>[    2.045334] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    2.048852] ata1.00: configured for UDMA/133
>[    2.048888] async_waiting @ 6
>[    2.048892] ata2.00: configured for UDMA/133
>[    2.048895] async_continuing @ 6 after 1 usec
>[    2.048910] async_waiting @ 28
>[    2.050168] scsi 0:0:0:0: Direct-Access     ATA      LITEONIT LSS-16L DS46 PQ: 0 ANSI: 5
>[    2.052356] calling  4_sd_probe_async+0x0/0x1d5 @ 1001
>[    2.052650] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
>[    2.053304] sd 0:0:0:0: [sda] Write Protect is off
>[    2.053311] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.053511] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.053890] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    2.054928] initcall 1_async_port_probe+0x0/0x50 returned 0 after 311324 usecs
>[    2.054980] async_continuing @ 28 after 5919 usec
>[    2.055939] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000LPCX-2 01.0 PQ: 0 ANSI: 5
>[    2.057711] calling  5_sd_probe_async+0x0/0x1d5 @ 6
>[    2.057953] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>[    2.057959] sd 1:0:0:0: [sdb] 4096-byte physical blocks
>[    2.058325]  sda: sda1 sda2
>[    2.058685] sd 1:0:0:0: [sdb] Write Protect is off
>[    2.058692] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    2.058941] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.059338] sd 1:0:0:0: Attached scsi generic sg1 type 0
>[    2.060384] initcall 2_async_port_probe+0x0/0x50 returned 0 after 316575 usecs
>[    2.060407] async_continuing @ 1000 after 316409 usec
>[    2.060420] initcall 3_async_port_probe+0x0/0x50 returned 0 after 316494 usecs
>[    2.062306] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.062315] initcall 4_sd_probe_async+0x0/0x1d5 returned 0 after 9712 usecs
>[    2.096285] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    2.127702]  sdb: sdb1
>[    2.130512] sd 1:0:0:0: [sdb] Attached SCSI disk
>[    2.130525] initcall 5_sd_probe_async+0x0/0x1d5 returned 0 after 71064 usecs
>[    2.130543] async_continuing @ 1 after 214496 usec
>[    2.131999] Freeing unused kernel memory: 1312K (ffffffff820f3000 - ffffffff8223b000)
>[    2.132002] Write protecting the kernel read-only data: 16384k
>[    2.138477] Freeing unused kernel memory: 2028K (ffff880001805000 - ffff880001a00000)
>[    2.142452] Freeing unused kernel memory: 1468K (ffff880001e91000 - ffff880002000000)
>[    2.155686] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    2.156515] systemd[1]: Running in initial RAM disk.
>[    2.157707] systemd[1]: Failed to insert module 'ipv6'
>[    2.157982] systemd[1]: Set hostname to <x-hswu22>.
>[    2.161976] random: systemd urandom read with 32 bits of entropy available
>[    2.180765] systemd[1]: Expecting device dev-disk-by\x2duuid-0b9b45e5\x2d5f7b\x2d41b3\x2d853f\x2d14bf05023f57.device...
>[    2.180809] systemd[1]: Expecting device dev-disk-by\x2duuid-6a28c748\x2d80f9\x2d48ad\x2d8ff8\x2dba93ce869566.device...
>[    2.180845] systemd[1]: Starting Timers.
>[    2.180882] systemd[1]: Reached target Timers.
>[    2.181073] systemd[1]: Starting udev Kernel Socket.
>[    2.181247] systemd[1]: Listening on udev Kernel Socket.
>[    2.181369] systemd[1]: Starting udev Control Socket.
>[    2.181538] systemd[1]: Listening on udev Control Socket.
>[    2.181557] systemd[1]: Starting Journal Socket.
>[    2.181868] systemd[1]: Listening on Journal Socket.
>[    2.182566] systemd[1]: Started dracut cmdline hook.
>[    2.183436] systemd[1]: Starting dracut pre-udev hook...
>[    2.187641] systemd[1]: Started Load Kernel Modules.
>[    2.187668] systemd[1]: Starting Sockets.
>[    2.187710] systemd[1]: Reached target Sockets.
>[    2.187746] systemd[1]: Starting Setup Virtual Console...
>[    2.190598] systemd[1]: Starting Journal Service...
>[    2.195480] systemd[1]: Started Journal Service.
>[    2.196223] systemd[1]: Starting Swap.
>[    2.196290] systemd[1]: Reached target Swap.
>[    2.196324] systemd[1]: Starting Local File Systems.
>[    2.196383] systemd[1]: Reached target Local File Systems.
>[    2.212775] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
>[    2.212785] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.216471] hub 1-1:1.0: USB hub found
>[    2.216635] hub 1-1:1.0: 8 ports detected
>[    2.271085] systemd-udevd[1203]: starting version 204
>[    2.389295] usb 2-4: new high-speed USB device number 2 using xhci_hcd
>[    2.422041] usb 2-4: New USB device found, idVendor=0b95, idProduct=7720
>[    2.422050] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.422055] usb 2-4: Product: AX88772 
>[    2.422059] usb 2-4: SerialNumber: 007123
>[    2.498792] calling  acpi_button_driver_init+0x0/0x12 [button] @ 1226
>[    2.500018] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
>[    2.506081] calling  acpi_video_init+0x0/0x8a [video] @ 1228
>[    2.506115] initcall acpi_video_init+0x0/0x8a [video] returned 0 after 22 usecs
>[    2.506373] tsc: Refined TSC clocksource calibration: 1696.072 MHz
>[    2.525480] ACPI: Lid Switch [LID0]
>[    2.527470] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>[    2.529583] ACPI: Power Button [PWRB]
>[    2.532118] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>[    2.534040] ACPI: Power Button [PWRF]
>[    2.534615] initcall acpi_button_driver_init+0x0/0x12 [button] returned 0 after 34955 usecs
>[    2.561750] calling  acpi_wmi_init+0x0/0x77 [wmi] @ 1228
>[    2.565412] wmi: Mapper loaded
>[    2.565424] initcall acpi_wmi_init+0x0/0x77 [wmi] returned 0 after 3573 usecs
>[    2.572547] calling  drm_core_init+0x0/0x10e [drm] @ 1226
>[    2.573763] [drm] Initialized drm 1.1.0 20060810
>[    2.573783] initcall drm_core_init+0x0/0x10e [drm] returned 0 after 1185 usecs
>[    2.590918] calling  i915_init+0x0/0x6c [i915] @ 1226
>[    2.604418] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0a16 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    2.605087] [drm:intel_detect_pch], Found LynxPoint LP PCH
>[    2.606457] [drm] Memory usable by graphics device = 2048M
>[    2.606464] [drm:i915_gem_gtt_init], GMADR size = 256M
>[    2.606468] [drm:i915_gem_gtt_init], GTT stolen size = 64M
>[    2.673611] [drm:intel_opregion_setup], graphic opregion physical addr: 0x90fb1018
>[    2.673661] [drm:intel_opregion_setup], Public ACPI methods supported
>[    2.673664] [drm:intel_opregion_setup], SWSCI supported
>[    2.685438] [drm:swsci_setup], SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    2.685445] [drm:intel_opregion_setup], ASLE supported
>[    2.696948] i915 0000:00:02.0: irq 61 for MSI/MSI-X
>[    2.697133] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    2.697137] [drm] Driver supports precise vblank timestamp query.
>[    2.697143] [drm:init_vbt_defaults], Set default to SSC at 120MHz
>[    2.697149] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT HASWELL        d
>[    2.697155] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    2.697159] [drm:parse_general_definitions], crt_ddc_bus_pin: 0
>[    2.697180] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[    2.697188] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 75600 1366 1404 1426 1592 768 771 777 790 0x8 0xa
>[    2.697193] [drm:parse_lfp_panel_data], VBT initial LVDS value 300300
>[    2.697317] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[    2.697324] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    2.697395] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[    2.698838] [drm:parse_mipi], No MIPI BDB found
>[    2.698845] [drm:parse_ddi_port], Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    2.698852] [drm:parse_ddi_port], VBT HDMI level shift for port A: 0
>[    2.698857] [drm:parse_ddi_port], Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    2.698861] [drm:parse_ddi_port], VBT HDMI level shift for port C: 6
>[    2.698915] [drm:intel_dsm_pci_probe], no _DSM method for intel device
>[    2.698987] [drm:i915_gem_init_stolen], found 67108864 bytes of stolen memory at 9ba00000
>[    2.700280] [drm:intel_print_wm_latency], Primary WM0 latency 20 (2.0 usec)
>[    2.700287] [drm:intel_print_wm_latency], Primary WM1 latency 4 (2.0 usec)
>[    2.700292] [drm:intel_print_wm_latency], Primary WM2 latency 36 (18.0 usec)
>[    2.700296] [drm:intel_print_wm_latency], Primary WM3 latency 90 (45.0 usec)
>[    2.700301] [drm:intel_print_wm_latency], Primary WM4 latency 160 (80.0 usec)
>[    2.700305] [drm:intel_print_wm_latency], Sprite WM0 latency 20 (2.0 usec)
>[    2.700309] [drm:intel_print_wm_latency], Sprite WM1 latency 4 (2.0 usec)
>[    2.700313] [drm:intel_print_wm_latency], Sprite WM2 latency 36 (18.0 usec)
>[    2.700317] [drm:intel_print_wm_latency], Sprite WM3 latency 90 (45.0 usec)
>[    2.700322] [drm:intel_print_wm_latency], Sprite WM4 latency 160 (80.0 usec)
>[    2.700361] [drm:intel_print_wm_latency], Cursor WM0 latency 20 (2.0 usec)
>[    2.700366] [drm:intel_print_wm_latency], Cursor WM1 latency 4 (2.0 usec)
>[    2.700370] [drm:intel_print_wm_latency], Cursor WM2 latency 36 (18.0 usec)
>[    2.700374] [drm:intel_print_wm_latency], Cursor WM3 latency 90 (45.0 usec)
>[    2.700378] [drm:intel_print_wm_latency], Cursor WM4 latency 160 (80.0 usec)
>[    2.700383] [drm:intel_modeset_init], 3 display pipes available.
>[    2.701486] [drm:intel_ddi_pll_init], CDCLK running at 450000KHz
>[    2.701492] [drm:intel_shared_dpll_init], 0 shared PLLs initialized
>[    2.701507] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    2.701913] [drm:intel_dp_init_connector], Adding eDP connector on port A
>[    2.712858] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
>[    2.712867] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    2.712872] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600
>[    2.712876] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200
>[    2.712880] [drm:intel_dp_i2c_init], i2c_init DPDDC-A
>[    2.712886] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
>[    2.712899] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    2.713922] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
>[    2.714102] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
>[    2.716894] [drm:intel_dp_get_dpcd], DPCD: 11 0a 81 41 00 00 01 80 02 00 00 00 0f 07 00
>[    2.717098] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x7d0000a, PP_OFF 0x1f407d0, PP_DIV 0x4af06
>[    2.718802] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[    2.735583] asix 2-4:1.0 eth0: register 'asix' at usb-0000:00:14.0-4, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:b1:df:6f
>[    2.783206] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[    2.783281] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    2.785751] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 851/851, sysfs interface registered
>[    2.787639] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000]
>[    2.791116] [drm:init_status_page], render ring hws offset: 0x00000000
>[    2.795877] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
>[    2.796025] [drm:init_status_page], bsd ring hws offset: 0x00022000
>[    2.796928] [drm:init_status_page], blitter ring hws offset: 0x00043000
>[    2.801273] [drm:init_status_page], video enhancement ring hws offset: 0x00064000
>[    2.803042] [drm:create_default_context], Default HW context loaded
>[    2.803049] [drm:i915_gem_context_init], HW context support initialized
>[    2.803263] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
>[    2.803272] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
>[    2.803279] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
>[    2.803285] [drm:intel_ddi_get_crtc_pll], Pipe A connected to port A using clock 0x20000000
>[    2.803297] [drm:intel_modeset_readout_hw_state], [ENCODER:9:TMDS-9] hw state readout: enabled, pipe A
>[    2.803303] [drm:intel_modeset_readout_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A
>[    2.803310] [drm:intel_modeset_readout_hw_state], [CONNECTOR:10:eDP-1] hw state readout: enabled
>[    2.803316] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:HDMI-A-1] hw state readout: disabled
>[    2.803323] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
>[    2.803327] [drm:intel_dump_pipe_config], cpu_transcoder: P
>[    2.803331] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 0
>[    2.803336] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.803342] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 5284823, gmch_n: 8388608, link_m: 146800, link_n: 524288, tu: 64
>[    2.803346] [drm:intel_dump_pipe_config], requested mode:
>[    2.803352] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
>[    2.803356] [drm:intel_dump_pipe_config], adjusted mode:
>[    2.803362] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5
>[    2.803368] [drm:intel_dump_crtc_timings], crtc timings: 0 1366 1404 1426 1592 768 771 777 790, type: 0x0 flags: 0x5
>[    2.803410] [drm:intel_dump_pipe_config], port clock: 0
>[    2.803414] [drm:intel_dump_pipe_config], pipe src size: 720x400
>[    2.803418] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.803423] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x05560300, enabled
>[    2.803426] [drm:intel_dump_pipe_config], ips: 0
>[    2.803430] [drm:intel_dump_pipe_config], double wide: 0
>[    2.803436] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
>[    2.803440] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[    2.803443] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    2.803448] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.803454] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.803459] [drm:intel_dump_pipe_config], requested mode:
>[    2.803465] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.803469] [drm:intel_dump_pipe_config], adjusted mode:
>[    2.803474] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.803480] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.803485] [drm:intel_dump_pipe_config], port clock: 0
>[    2.803489] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[    2.803493] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.803498] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.803501] [drm:intel_dump_pipe_config], ips: 0
>[    2.803506] [drm:intel_dump_pipe_config], double wide: 0
>[    2.803512] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
>[    2.803516] [drm:intel_dump_pipe_config], cpu_transcoder: C
>[    2.803520] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    2.803525] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.803530] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.803535] [drm:intel_dump_pipe_config], requested mode:
>[    2.803540] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.803544] [drm:intel_dump_pipe_config], adjusted mode:
>[    2.803550] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.803555] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.803560] [drm:intel_dump_pipe_config], port clock: 0
>[    2.803564] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[    2.803568] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.803573] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.803576] [drm:intel_dump_pipe_config], ips: 0
>[    2.803581] [drm:intel_dump_pipe_config], double wide: 0
>[    2.803600] [drm:intel_connector_check_state], [CONNECTOR:10:eDP-1]
>[    2.803607] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
>[    2.803613] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
>[    2.803617] [drm:check_crtc_state], [CRTC:3]
>[    2.803656] [drm:check_crtc_state], [CRTC:5]
>[    2.803664] [drm:check_crtc_state], [CRTC:7]
>[    2.803815] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[    2.803821] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[    2.804032] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[    2.804223] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[    2.804297] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    2.804308] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[    2.804315] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
>[    2.804320] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
>[    2.804324] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
>[    2.804681] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    2.804688] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[    2.804693] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] disconnected
>[    2.804697] [drm:drm_setup_crtcs], 
>[    2.804744] [drm:drm_enable_connectors], connector 10 enabled? yes
>[    2.804748] [drm:drm_enable_connectors], connector 18 enabled? no
>[    2.804753] [drm:drm_target_preferred], looking for cmdline mode on connector 10
>[    2.804757] [drm:drm_target_preferred], looking for preferred mode on connector 10
>[    2.804761] [drm:drm_target_preferred], found mode 1366x768
>[    2.804765] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[    2.804790] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3
>[    2.804821] [drm:intelfb_create], no BIOS fb, allocating a new one
>[    2.804825] [drm:i915_gem_object_create_stolen], creating stolen object: size=408000
>[    2.804863] [drm:i915_pages_create_for_stolen], offset=0x0, size=4227072
>[    2.806304] [drm:intelfb_create], allocated 1366x768 fb: 0x000a1000, bo ffff880156481180
>[    2.807971] fbcon: inteldrmfb (fb0) is primary device
>[    2.810694] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[    2.810734] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[    2.810736] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[    2.810739] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.810742] [drm:drm_mode_debug_printmodeline], Modeline 19:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
>[    2.810744] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
>[    2.810747] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    2.810761] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    2.810775] [drm:connected_sink_compute_bpp], [CONNECTOR:10:eDP-1] checking for sink bpp constrains
>[    2.810776] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
>[    2.810780] [drm:intel_dp_compute_config], DP link computation with max lane count 1 max bw 0a pixel clock 75600KHz
>[    2.810782] [drm:intel_dp_compute_config], DP link bw 0a lane count 1 clock 270000 bpp 18
>[    2.810783] [drm:intel_dp_compute_config], DP link bw required 136080 available 216000
>[    2.810786] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[    2.810788] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[    2.810789] [drm:intel_dump_pipe_config], cpu_transcoder: P
>[    2.810791] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[    2.810793] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.810795] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 2642411, gmch_n: 4194304, link_m: 146800, link_n: 524288, tu: 64
>[    2.810796] [drm:intel_dump_pipe_config], requested mode:
>[    2.810799] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
>[    2.810800] [drm:intel_dump_pipe_config], adjusted mode:
>[    2.810803] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
>[    2.810806] [drm:intel_dump_crtc_timings], crtc timings: 75600 1366 1404 1426 1592 768 771 777 790, type: 0x48 flags: 0xa
>[    2.810807] [drm:intel_dump_pipe_config], port clock: 270000
>[    2.810808] [drm:intel_dump_pipe_config], pipe src size: 1366x768
>[    2.810810] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.810812] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.810813] [drm:intel_dump_pipe_config], ips: 1
>[    2.810814] [drm:intel_dump_pipe_config], double wide: 0
>[    2.811052] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[    2.811062] [drm:ironlake_edp_backlight_off], 
>[    2.819930] [drm:ironlake_edp_panel_off], Turn eDP power off
>[    2.889523] usb 2-5: new high-speed USB device number 3 using xhci_hcd
>[    2.893939] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
>[    2.932045] usb 2-5: New USB device found, idVendor=13d3, idProduct=5173
>[    2.932048] usb 2-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>[    2.932050] usb 2-5: Product: Lenovo EasyCamera
>[    2.932052] usb 2-5: Manufacturer: Azurewave
>[    2.932054] usb 2-5: SerialNumber: NULL
>[    3.011561] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[    3.011567] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0008
>[    3.089693] usb 2-6: new full-speed USB device number 4 using xhci_hcd
>[    3.102401] usb 2-6: New USB device found, idVendor=8087, idProduct=07dc
>[    3.102404] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    3.507210] Switched to clocksource tsc
>[    3.869919] [drm:ironlake_wait_panel_status], Wait complete
>[    3.869958] [drm:intel_update_fbc], no output, disabling
>[    3.869981] [drm:hsw_set_power_well], Requesting to disable the power well
>[    3.870039] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 5504
>[    3.870048] [drm:intel_crtc_mode_set], [ENCODER:9:TMDS-9] set [MODE:0:1366x768]
>[    3.870050] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
>[    3.870068] [drm:ironlake_edp_panel_on], Turn eDP power on
>[    3.870071] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[    3.870076] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008
>[    3.870078] [drm:ironlake_wait_panel_status], Wait complete
>[    3.870083] [drm:ironlake_wait_panel_on], Wait for panel power on
>[    3.870088] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b
>[    4.079007] [drm:ironlake_wait_panel_status], Wait complete
>[    4.080237] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[    4.080750] [drm:intel_dp_start_link_train], clock recovery OK
>[    4.081566] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[    4.133945] [drm:g4x_wait_for_vblank], vblank wait timed out
>[    4.134150] [drm:ironlake_edp_backlight_on], 
>[    4.134158] [drm:intel_panel_enable_backlight], pipe A
>[    4.134166] [drm:intel_panel_actually_set_backlight], set backlight PWM = 851
>[    4.134174] [drm:intel_edp_psr_match_conditions], PSR disable by flag
>[    4.167957] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[    4.185981] [drm:intel_connector_check_state], [CONNECTOR:10:eDP-1]
>[    4.185988] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
>[    4.185992] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
>[    4.185996] [drm:check_crtc_state], [CRTC:3]
>[    4.186021] [drm:check_crtc_state], [CRTC:5]
>[    4.186026] [drm:check_crtc_state], [CRTC:7]
>[    4.186051] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[    4.186107] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    4.186111] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.186124] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    4.186175] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    4.186178] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.186445] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[    4.186503] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    4.186506] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.194227] Console: switching to colour frame buffer device 170x48
>[    4.194236] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[    4.194292] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    4.194295] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.202239] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    4.202241] i915 0000:00:02.0: registered panic notifier
>[    4.249684] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    4.257361] [drm:asle_set_backlight], bclp = 0x800000ff
>[    4.257383] [drm:asle_set_backlight], updating opregion backlight 255/255
>[    4.257404] [drm:intel_panel_actually_set_backlight], set backlight PWM = 765
>[    4.261050] [drm:asle_set_backlight], bclp = 0x800000ff
>[    4.261057] [drm:asle_set_backlight], updating opregion backlight 255/255
>[    4.261062] [drm:intel_panel_actually_set_backlight], set backlight PWM = 765
>[    4.263240] acpi device:49: registered as cooling_device4
>[    4.266384] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
>[    4.268304] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    4.268345] [drm:i915_gem_open], 
>[    4.268665] [drm:intel_crtc_cursor_set], cursor off
>[    4.268682] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[    4.268721] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    4.268727] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.268751] [drm:intel_crtc_cursor_set], cursor off
>[    4.268757] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[    4.268801] initcall i915_init+0x0/0x6c [i915] returned 0 after 1637832 usecs
>[    4.268807] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    4.268812] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.268825] [drm:intel_crtc_cursor_set], cursor off
>[    4.268830] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    4.268855] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    4.268859] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.268930] [drm:i915_gem_open], 
>[    4.269020] [drm:intel_crtc_cursor_set], cursor off
>[    4.269024] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[    4.269043] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    4.269046] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.269055] [drm:intel_crtc_cursor_set], cursor off
>[    4.269058] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[    4.269073] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    4.269076] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.269084] [drm:intel_crtc_cursor_set], cursor off
>[    4.269086] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    4.269102] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    4.269104] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.269169] [drm:i915_gem_open], 
>[    4.269435] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[2] ENCODERS[2]
>[    4.269464] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[2] ENCODERS[2]
>[    4.269488] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[    4.269501] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[    4.269505] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[    4.269802] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[    4.270008] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[    4.270113] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    4.270127] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[    4.270134] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
>[    4.270143] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[    4.277667] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[    4.277676] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
>[    4.277680] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
>[    4.277893] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    4.277898] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[    4.277901] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] disconnected
>[    4.277907] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[    4.277911] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
>[    4.277913] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
>[    4.278107] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    4.278117] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[    4.278123] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] disconnected
>[    4.278431] [drm:drm_mode_addfb], [FB:21]
>[    4.333668] [drm:drm_mode_addfb], [FB:21]
>[    4.333780] [drm:drm_mode_setcrtc], [CRTC:3]
>[    4.333819] [drm:drm_mode_setcrtc], [CONNECTOR:10:eDP-1]
>[    4.333823] [drm:intel_crtc_set_config], [CRTC:3] [FB:21] #connectors=1 (x y) (0 0)
>[    4.333842] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
>[    4.333850] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.340683] [drm:ironlake_update_plane], Writing base 004A9000 00000000 0 0 5504
>[    4.356104] [drm:drm_mode_setcrtc], [CRTC:3]
>[    4.356123] [drm:drm_mode_setcrtc], [CONNECTOR:10:eDP-1]
>[    4.356126] [drm:intel_crtc_set_config], [CRTC:3] [FB:21] #connectors=1 (x y) (0 0)
>[    4.356146] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    4.356150] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.388208] random: nonblocking pool is initialized
>[    4.461285] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
>[    4.719499] [drm:intel_print_rc6_info], Haswell: only RC6 available
>[    4.719504] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    4.727976] systemd-journald[1180]: Received SIGTERM
>[    5.719826] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
>[    5.719838] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    5.971954] calling  inet6_init+0x0/0x2fb [ipv6] @ 1
>[    5.974230] NET: Registered protocol family 10
>[    5.976476] initcall inet6_init+0x0/0x2fb [ipv6] returned 0 after 4389 usecs
>[    6.406545] LVM: Logical Volume autoactivation enabled.
>[    6.406557] LVM: Activation generator successfully completed.
>[    7.124131] systemd-readahead[2060]: Failed to create fanotify object: Function not implemented
>[    7.125471] systemd-readahead[2059]: Bumped block_nr parameter of 8:16 to 20480. This is a temporary hack and should be removed one day.
>[    8.483490] systemd-udevd[2075]: starting version 204
>[    8.784006] calling  uinput_init+0x0/0x12 [uinput] @ 2868
>[    8.784670] initcall uinput_init+0x0/0x12 [uinput] returned 0 after 636 usecs
>[    8.869389] calling  acpi_cpufreq_init+0x0/0x1ec [acpi_cpufreq] @ 2859
>[    8.887714] initcall acpi_cpufreq_init+0x0/0x1ec [acpi_cpufreq] returned 0 after 17875 usecs
>[    9.145733] calling  init_soundcore+0x0/0x9a [soundcore] @ 2856
>[    9.146353] initcall init_soundcore+0x0/0x9a [soundcore] returned 0 after 593 usecs
>[    9.156119] calling  alsa_sound_init+0x0/0x9a [snd] @ 2851
>[    9.156503] initcall alsa_sound_init+0x0/0x9a [snd] returned 0 after 362 usecs
>[    9.158815] calling  alsa_timer_init+0x0/0x18a [snd_timer] @ 2851
>[    9.160174] initcall alsa_timer_init+0x0/0x18a [snd_timer] returned 0 after 1314 usecs
>[    9.174142] calling  snd_mem_init+0x0/0x2c [snd_page_alloc] @ 2856
>[    9.174180] initcall snd_mem_init+0x0/0x2c [snd_page_alloc] returned 0 after 26 usecs
>[    9.220872] calling  i2c_i801_init+0x0/0xab [i2c_i801] @ 2864
>[    9.223125] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130927/utaddress-251)
>[    9.223136] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    9.223462] initcall i2c_i801_init+0x0/0xab [i2c_i801] returned 0 after 2518 usecs
>[    9.226071] calling  pcspkr_platform_driver_init+0x0/0x19 [pcspkr] @ 2865
>[    9.226709] input: PC Speaker as /devices/platform/pcspkr/input/input7
>[    9.227504] initcall pcspkr_platform_driver_init+0x0/0x19 [pcspkr] returned 0 after 1388 usecs
>[    9.249978] Adding 2047996k swap on /dev/sda2.  Priority:-1 extents:1 across:2047996k SS
>[    9.308040] calling  lpc_ich_driver_init+0x0/0x20 [lpc_ich] @ 2860
>[    9.308672] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20130927/utaddress-251)
>[    9.308683] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    9.308695] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20130927/utaddress-251)
>[    9.308707] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20130927/utaddress-251)
>[    9.308714] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    9.308722] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20130927/utaddress-251)
>[    9.308733] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20130927/utaddress-251)
>[    9.308744] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20130927/utaddress-251)
>[    9.308750] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    9.308752] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    9.309058] initcall lpc_ich_driver_init+0x0/0x20 [lpc_ich] returned 0 after 982 usecs
>[    9.320504] calling  acpi_ac_init+0x0/0x35 [ac] @ 2854
>[    9.320891] calling  acpi_battery_init+0x0/0x16 [battery] @ 2857
>[    9.320910] initcall acpi_battery_init+0x0/0x16 [battery] returned 0 after 10 usecs
>[    9.326715] ACPI: AC Adapter [ACAD] (off-line)
>[    9.327518] initcall acpi_ac_init+0x0/0x35 [ac] returned 0 after 6836 usecs
>[    9.633301] calling  iTCO_vendor_init_module+0x0/0x1c [iTCO_vendor_support] @ 2853
>[    9.633306] iTCO_vendor_support: vendor-support=0
>[    9.633312] initcall iTCO_vendor_init_module+0x0/0x1c [iTCO_vendor_support] returned 0 after 2 usecs
>[    9.634525] calling  iTCO_wdt_init_module+0x0/0x2e [iTCO_wdt] @ 2853
>[    9.634532] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[    9.634710] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    9.636611] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    9.636948] initcall iTCO_wdt_init_module+0x0/0x2e [iTCO_wdt] returned 0 after 2353 usecs
>[    9.652161] calling  alsa_pcm_init+0x0/0x6c [snd_pcm] @ 2890
>[    9.652288] initcall alsa_pcm_init+0x0/0x6c [snd_pcm] returned 0 after 112 usecs
>[    9.701199] calling  videodev_init+0x0/0x86 [videodev] @ 2854
>[    9.701204] Linux video capture interface: v2.00
>[    9.702066] initcall videodev_init+0x0/0x86 [videodev] returned 0 after 830 usecs
>[    9.809013] calling  uvc_init+0x0/0x46 [uvcvideo] @ 2854
>[    9.809232] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (13d3:5173)
>[    9.813924] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input8
>[    9.814962] usbcore: registered new interface driver uvcvideo
>[    9.814966] USB Video Class driver (1.1.1)
>[    9.814975] initcall uvc_init+0x0/0x46 [uvcvideo] returned 0 after 5808 usecs
>[    9.925006] ACPI: Battery Slot [BAT1] (battery present)
>[    9.946325] calling  alsa_seq_device_init+0x0/0x5b [snd_seq_device] @ 2916
>[    9.946392] initcall alsa_seq_device_init+0x0/0x5b [snd_seq_device] returned 0 after 57 usecs
>[   10.048065] EXT4-fs (sdb1): re-mounted. Opts: (null)
>[   10.148354] calling  alsa_seq_init+0x0/0x49 [snd_seq] @ 2915
>[   10.149432] initcall alsa_seq_init+0x0/0x49 [snd_seq] returned 0 after 1040 usecs
>[   10.178209] calling  alsa_hwdep_init+0x0/0x64 [snd_hwdep] @ 2856
>[   10.178269] initcall alsa_hwdep_init+0x0/0x64 [snd_hwdep] returned 0 after 50 usecs
>[   10.197156] calling  azx_driver_init+0x0/0x20 [snd_hda_intel] @ 2856
>[   10.199471] ALSA sound/pci/hda/hda_i915.c:58 HDA driver get symbol successfully from i915 module
>[   10.199495] [drm:hsw_set_power_well], Enabling power well
>[   10.199735] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
>[   10.203338] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
>[   10.279692] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>[   10.354265] calling  patch_realtek_init+0x0/0x12 [snd_hda_codec_realtek] @ 2948
>[   10.354276] initcall patch_realtek_init+0x0/0x12 [snd_hda_codec_realtek] returned 0 after 1 usecs
>[   10.355126] ALSA sound/pci/hda/patch_realtek.c:419 SKU: Nid=0x1d sku_cfg=0x40f41905
>[   10.355132] ALSA sound/pci/hda/patch_realtek.c:421 SKU: port_connectivity=0x1
>[   10.355134] ALSA sound/pci/hda/patch_realtek.c:422 SKU: enable_pcbeep=0x1
>[   10.355137] ALSA sound/pci/hda/patch_realtek.c:423 SKU: check_sum=0x00000004
>[   10.355139] ALSA sound/pci/hda/patch_realtek.c:424 SKU: customization=0x00000019
>[   10.355141] ALSA sound/pci/hda/patch_realtek.c:425 SKU: external_amp=0x0
>[   10.355143] ALSA sound/pci/hda/patch_realtek.c:426 SKU: platform_type=0x1
>[   10.355145] ALSA sound/pci/hda/patch_realtek.c:427 SKU: swap=0x0
>[   10.355147] ALSA sound/pci/hda/patch_realtek.c:428 SKU: override=0x1
>[   10.355459] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[   10.355462] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   10.355464] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[   10.355466] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
>[   10.355468] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
>[   10.355472] ALSA sound/pci/hda/hda_auto_parser.c:410      Mic=0x19
>[   10.355476] ALSA sound/pci/hda/hda_auto_parser.c:410      Internal Mic=0x12
>[   10.355479] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x40f41905 for NID 0x1d
>[   10.355482] ALSA sound/pci/hda/patch_realtek.c:507 realtek: Enabling init ASM_ID=0x1905 CODEC_ID=10ec0283
>[   10.364632] calling  patch_hdmi_init+0x0/0x12 [snd_hda_codec_hdmi] @ 2945
>[   10.364643] initcall patch_hdmi_init+0x0/0x12 [snd_hda_codec_hdmi] returned 0 after 1 usecs
>[   10.382000] initcall azx_driver_init+0x0/0x20 [snd_hda_intel] returned 0 after 180423 usecs
>[   11.231234] systemd-udevd[2852]: renamed network interface eth0 to enp0s20u4
>[   11.542595] type=1305 audit(1386262684.514:2): audit_pid=2986 old=0 auid=4294967295 ses=4294967295 res=1
>[   12.228525] traps: alsactl[3005] general protection ip:3cda048c39 sp:7fff5e271fa0 error:0 in libc-2.17.so[3cda000000+1b5000]
>[   12.377291] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[   12.377325] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
>[   12.377328] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   12.377357] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 5504
>[   12.389425] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[   12.389453] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   12.389456] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   12.389463] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[   12.389491] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   12.389493] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   12.389504] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[   12.389528] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[   12.389530] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   12.389550] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[   12.389575] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[   12.389577] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   12.398083] [drm:intel_crtc_cursor_set], cursor off
>[   12.398089] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[   12.398115] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[   12.398119] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   12.398128] [drm:intel_crtc_cursor_set], cursor off
>[   12.398131] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[   12.398151] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   12.398154] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   12.398162] [drm:intel_crtc_cursor_set], cursor off
>[   12.398164] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[   12.398185] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   12.398188] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   13.087110] systemd-logind[3026]: Watching system buttons on /dev/input/event3 (Power Button)
>[   13.087447] systemd-logind[3026]: Watching system buttons on /dev/input/event5 (Video Bus)
>[   13.087934] systemd-logind[3026]: Watching system buttons on /dev/input/event2 (Power Button)
>[   13.088257] systemd-logind[3026]: Watching system buttons on /dev/input/event1 (Lid Switch)
>[   28.183135] IPv6: ADDRCONF(NETDEV_UP): enp0s20u4: link is not ready
>[   28.217810] asix 2-4:1.0 enp0s20u4: link down
>[   29.584274] calling  xt_init+0x0/0x156 [x_tables] @ 3137
>[   29.584314] initcall xt_init+0x0/0x156 [x_tables] returned 0 after 26 usecs
>[   29.608164] calling  ebtables_init+0x0/0x4a [ebtables] @ 3137
>[   29.608248] Ebtables v2.0 registered
>[   29.608257] initcall ebtables_init+0x0/0x4a [ebtables] returned 0 after 79 usecs
>[   29.613168] calling  ebtable_nat_init+0x0/0x3e [ebtable_nat] @ 3142
>[   29.613359] initcall ebtable_nat_init+0x0/0x3e [ebtable_nat] returned 0 after 175 usecs
>[   29.668480] calling  ip_tables_init+0x0/0x9e [ip_tables] @ 3147
>[   29.668545] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   29.668551] initcall ip_tables_init+0x0/0x9e [ip_tables] returned 0 after 60 usecs
>[   29.673771] calling  iptable_filter_init+0x0/0x4c [iptable_filter] @ 3150
>[   29.674422] initcall iptable_filter_init+0x0/0x4c [iptable_filter] returned 0 after 622 usecs
>[   29.699910] calling  ip6_tables_init+0x0/0x9e [ip6_tables] @ 3155
>[   29.699975] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   29.699981] initcall ip6_tables_init+0x0/0x9e [ip6_tables] returned 0 after 60 usecs
>[   29.705596] calling  ip6table_filter_init+0x0/0x55 [ip6table_filter] @ 3158
>[   29.705947] initcall ip6table_filter_init+0x0/0x55 [ip6table_filter] returned 0 after 260 usecs
>[   29.882558] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20u4: link becomes ready
>[   29.883920] asix 2-4:1.0 enp0s20u4: link up, 100Mbps, full-duplex, lpa 0xC5E1
>[  160.574520] PM: Syncing filesystems ... done.
>[  160.677606] PM: Preparing system for mem sleep
>[  160.678127] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[  160.679383] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[  160.680474] PM: Entering mem sleep
>[  160.680890] Suspending console(s) (use no_console_suspend to debug)
>[  160.682023] calling  input8+ @ 3211, parent: 2-5:1.0
>[  160.682043] call input8+ returned 0 after 15 usecs
>[  160.682061] calling  iTCO_wdt+ @ 3211, parent: 0000:00:1f.0
>[  160.682063] call iTCO_wdt+ returned 0 after 0 usecs
>[  160.682071] calling  input7+ @ 3211, parent: pcspkr
>[  160.682075] call input7+ returned 0 after 2 usecs
>[  160.682090] calling  input6+ @ 3211, parent: LNXVIDEO:00
>[  160.682093] call input6+ returned 0 after 1 usecs
>[  160.682101] calling  acpi_video0+ @ 3211, parent: 0000:00:02.0
>[  160.682165] call acpi_video0+ returned 0 after 61 usecs
>[  160.682484] calling  2-6+ @ 6, parent: usb2
>[  160.682508] call 2-6+ returned 0 after 18 usecs
>[  160.682577] calling  input2+ @ 3211, parent: serio1
>[  160.682584] call input2+ returned 0 after 3 usecs
>[  160.682602] calling  card0-HDMI-A-1+ @ 3211, parent: card0
>[  160.682605] call card0-HDMI-A-1+ returned 0 after 1 usecs
>[  160.682613] calling  intel_backlight+ @ 3211, parent: card0-eDP-1
>[  160.682619] call intel_backlight+ returned 0 after 2 usecs
>[  160.682649] calling  i2c-6+ @ 3211, parent: card0-eDP-1
>[  160.682653] call i2c-6+ returned 0 after 1 usecs
>[  160.682661] calling  card0-eDP-1+ @ 3211, parent: card0
>[  160.682664] call card0-eDP-1+ returned 0 after 0 usecs
>[  160.682675] calling  2-5+ @ 28, parent: usb2
>[  160.682677] calling  i2c-5+ @ 3211, parent: 0000:00:02.0
>[  160.682681] call 2-5+ returned 0 after 1 usecs
>[  160.682683] call i2c-5+ returned 0 after 0 usecs
>[  160.682691] calling  i2c-4+ @ 3211, parent: 0000:00:02.0
>[  160.682693] call i2c-4+ returned 0 after 0 usecs
>[  160.682701] calling  i2c-3+ @ 3211, parent: 0000:00:02.0
>[  160.682703] call i2c-3+ returned 0 after 0 usecs
>[  160.682711] calling  i2c-2+ @ 3211, parent: 0000:00:02.0
>[  160.682713] call i2c-2+ returned 0 after 0 usecs
>[  160.682721] calling  i2c-1+ @ 3211, parent: 0000:00:02.0
>[  160.682723] call i2c-1+ returned 0 after 0 usecs
>[  160.682731] calling  i2c-0+ @ 3211, parent: 0000:00:02.0
>[  160.682733] call i2c-0+ returned 0 after 0 usecs
>[  160.682738] calling  card0+ @ 3211, parent: 0000:00:02.0
>[  160.682740] call card0+ returned 0 after 0 usecs
>[  160.682744] calling  controlD64+ @ 3211, parent: 0000:00:02.0
>[  160.682746] call controlD64+ returned 0 after 0 usecs
>[  160.682764] calling  input5+ @ 3211, parent: LNXPWRBN:00
>[  160.682768] call input5+ returned 0 after 2 usecs
>[  160.682776] calling  input4+ @ 3211, parent: PNP0C0C:00
>[  160.682779] call input4+ returned 0 after 1 usecs
>[  160.682788] calling  input3+ @ 3211, parent: PNP0C0D:00
>[  160.682790] call input3+ returned 0 after 1 usecs
>[  160.682845] calling  2-4+ @ 1001, parent: usb2
>[  160.682992] calling  1-1+ @ 6, parent: usb1
>[  160.683110] calling  input0+ @ 3211, parent: serio0
>[  160.683116] call input0+ returned 0 after 3 usecs
>[  160.683166] calling  rtc0+ @ 3211, parent: 00:04
>[  160.683169] call rtc0+ returned 0 after 0 usecs
>[  160.683182] calling  serio1+ @ 3211, parent: i8042
>[  160.683433] call 2-4+ returned 0 after 570 usecs
>[  160.683462] calling  1:0:0:0+ @ 1001, parent: target1:0:0
>[  160.683509] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
>[  160.683583] calling  0:0:0:0+ @ 1000, parent: target0:0:0
>[  160.683591] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  160.683909] sd 1:0:0:0: [sdb] Stopping disk
>[  160.686097] sd 0:0:0:0: [sda] Stopping disk
>[  160.702373] call serio1+ returned 0 after 18728 usecs
>[  160.702387] calling  serio0+ @ 3211, parent: i8042
>[  160.706064] call serio0+ returned 0 after 3585 usecs
>[  160.706078] calling  i8042+ @ 3211, parent: platform
>[  160.707019] call i8042+ returned 0 after 916 usecs
>[  160.707327] calling  usb3+ @ 1002, parent: 0000:00:14.0
>[  160.707658] calling  serial8250+ @ 3211, parent: platform
>[  160.707662] call serial8250+ returned 0 after 1 usecs
>[  160.707736] calling  usb2+ @ 3241, parent: 0000:00:14.0
>[  160.707805] call usb3+ returned 0 after 462 usecs
>[  160.707854] calling  alarmtimer+ @ 3211, parent: platform
>[  160.707889] calling  host2+ @ 3242, parent: ata3
>[  160.707894] call host2+ returned 0 after 1 usecs
>[  160.708148] call alarmtimer+ returned 0 after 283 usecs
>[  160.708172] calling  platform-framebuffer.0+ @ 3211, parent: platform
>[  160.708176] call platform-framebuffer.0+ returned 0 after 0 usecs
>[  160.708179] call usb2+ returned 0 after 428 usecs
>[  160.708184] calling  pcspkr+ @ 3211, parent: platform
>[  160.708200] calling  ata3+ @ 3243, parent: 0000:00:1f.2
>[  160.708288] call pcspkr+ returned 0 after 98 usecs
>[  160.708399] call ata3+ returned 0 after 190 usecs
>[  160.708628] calling  00:08+ @ 3211, parent: pnp0
>[  160.708636] call 00:08+ returned 0 after 5 usecs
>[  160.708640] calling  00:07+ @ 3211, parent: pnp0
>[  160.708644] call 00:07+ returned 0 after 2 usecs
>[  160.708649] calling  00:06+ @ 3211, parent: pnp0
>[  160.708651] call 00:06+ returned 0 after 0 usecs
>[  160.708655] calling  00:05+ @ 3211, parent: pnp0
>[  160.708659] call 00:05+ returned 0 after 2 usecs
>[  160.708664] calling  00:04+ @ 3211, parent: pnp0
>[  160.708675] call 00:04+ returned 0 after 8 usecs
>[  160.708679] calling  00:03+ @ 3211, parent: pnp0
>[  160.708683] call 00:03+ returned 0 after 2 usecs
>[  160.708688] calling  00:02+ @ 3211, parent: pnp0
>[  160.708690] call 00:02+ returned 0 after 0 usecs
>[  160.708695] calling  00:01+ @ 3211, parent: pnp0
>[  160.708697] call 00:01+ returned 0 after 0 usecs
>[  160.708701] calling  00:00+ @ 3211, parent: pnp0
>[  160.708703] call 00:00+ returned 0 after 0 usecs
>[  160.708730] calling  VPC2004:00+ @ 3211, parent: platform
>[  160.708732] call VPC2004:00+ returned 0 after 0 usecs
>[  160.708756] calling  0000:02:00.0+ @ 3247, parent: 0000:00:1c.2
>[  160.708760] call 0000:02:00.0+ returned 0 after 1 usecs
>[  160.708774] calling  0000:00:1f.3+ @ 3247, parent: pci0000:00
>[  160.708917] calling  0000:00:1f.0+ @ 3245, parent: pci0000:00
>[  160.708921] call 0000:00:1f.0+ returned 0 after 1 usecs
>[  160.709047] calling  0000:00:1c.3+ @ 3248, parent: pci0000:00
>[  160.709134] call 0000:00:1c.3+ returned 0 after 82 usecs
>[  160.709149] calling  0000:00:1c.2+ @ 3248, parent: pci0000:00
>[  160.709162] call 0000:00:1c.2+ returned 0 after 10 usecs
>[  160.709175] calling  0000:00:1c.0+ @ 3248, parent: pci0000:00
>[  160.709187] call 0000:00:1c.0+ returned 0 after 9 usecs
>[  160.709199] calling  0000:00:1b.0+ @ 3248, parent: pci0000:00
>[  160.710097] calling  0000:00:16.0+ @ 3249, parent: pci0000:00
>[  160.710101] call 0000:00:16.0+ returned 0 after 0 usecs
>[  160.710121] calling  0000:00:14.0+ @ 3249, parent: pci0000:00
>[  160.710185] call 0000:00:14.0+ returned 0 after 60 usecs
>[  160.710200] calling  0000:00:03.0+ @ 3249, parent: pci0000:00
>[  160.710229] calling  0000:00:02.0+ @ 3250, parent: pci0000:00
>[  160.710372] calling  0000:00:00.0+ @ 3251, parent: pci0000:00
>[  160.710376] call 0000:00:00.0+ returned 0 after 1 usecs
>[  160.711062] call 0000:00:1f.3+ returned 0 after 2231 usecs
>[  160.711139] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  160.711141] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C
>[  160.723319] call 1-1+ returned 0 after 39361 usecs
>[  160.723356] calling  usb1+ @ 1002, parent: 0000:00:1d.0
>[  160.724101] call usb1+ returned 0 after 723 usecs
>[  160.724119] calling  0000:00:1d.0+ @ 3245, parent: pci0000:00
>[  160.733409] call 0000:00:03.0+ returned 0 after 22648 usecs
>[  160.734363] call 0000:00:1b.0+ returned 0 after 24558 usecs
>[  160.736249] call 0000:00:1d.0+ returned 0 after 11836 usecs
>[  160.745409] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  160.745422] [drm:ironlake_edp_backlight_off], 
>[  160.774337] [drm:ironlake_edp_panel_off], Turn eDP power off
>[  160.946405] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[  160.946412] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000
>[  161.167747] call 0:0:0:0+ returned 0 after 472616 usecs
>[  161.167769] calling  target0:0:0+ @ 1160, parent: host0
>[  161.167772] call target0:0:0+ returned 0 after 0 usecs
>[  161.167791] calling  host0+ @ 3241, parent: ata1
>[  161.167795] call host0+ returned 0 after 0 usecs
>[  161.167816] calling  ata1+ @ 3243, parent: 0000:00:1f.2
>[  161.167935] call ata1+ returned 0 after 112 usecs
>[  161.246870] call 1:0:0:0+ returned 0 after 549970 usecs
>[  161.246908] calling  target1:0:0+ @ 28, parent: host1
>[  161.246912] call target1:0:0+ returned 0 after 0 usecs
>[  161.246935] calling  host1+ @ 3242, parent: ata2
>[  161.246938] call host1+ returned 0 after 0 usecs
>[  161.246958] calling  ata2+ @ 3244, parent: 0000:00:1f.2
>[  161.247026] call ata2+ returned 0 after 63 usecs
>[  161.247040] calling  0000:00:1f.2+ @ 3246, parent: pci0000:00
>[  161.257611] call 0000:00:1f.2+ returned 0 after 10313 usecs
>[  161.727801] [drm:ironlake_wait_panel_status], Wait complete
>[  161.727818] [drm:intel_update_fbc], no output, disabling
>[  161.740750] call 0000:00:02.0+ returned 0 after 1005944 usecs
>[  161.740846] PM: suspend of devices complete after 1058.487 msecs
>[  161.741622] calling  ACPI0003:00+ @ 3211, parent: platform
>[  161.741638] call ACPI0003:00+ returned 0 after 14 usecs
>[  161.741971] PM: late suspend of devices complete after 1.120 msecs
>[  161.742545] calling  0000:02:00.0+ @ 3211, parent: 0000:00:1c.2
>[  161.742644] call 0000:02:00.0+ returned 0 after 94 usecs
>[  161.742650] calling  0000:00:1f.3+ @ 3211, parent: pci0000:00
>[  161.742676] call 0000:00:1f.3+ returned 0 after 24 usecs
>[  161.742679] calling  0000:00:1f.2+ @ 3211, parent: pci0000:00
>[  161.742681] call 0000:00:1f.2+ returned 0 after 0 usecs
>[  161.742683] calling  0000:00:1f.0+ @ 3211, parent: pci0000:00
>[  161.742739] call 0000:00:1f.0+ returned 0 after 52 usecs
>[  161.742741] calling  0000:00:1d.0+ @ 3211, parent: pci0000:00
>[  161.743178] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[  161.753751] call 0000:00:1d.0+ returned 0 after 10745 usecs
>[  161.753755] calling  0000:00:1c.3+ @ 3211, parent: pci0000:00
>[  161.753803] call 0000:00:1c.3+ returned 0 after 45 usecs
>[  161.753805] calling  0000:00:1c.2+ @ 3211, parent: pci0000:00
>[  161.753853] call 0000:00:1c.2+ returned 0 after 44 usecs
>[  161.753855] calling  0000:00:1c.0+ @ 3211, parent: pci0000:00
>[  161.753902] call 0000:00:1c.0+ returned 0 after 44 usecs
>[  161.753905] calling  0000:00:1b.0+ @ 3211, parent: pci0000:00
>[  161.753907] call 0000:00:1b.0+ returned 0 after 0 usecs
>[  161.753909] calling  0000:00:16.0+ @ 3211, parent: pci0000:00
>[  161.753947] call 0000:00:16.0+ returned 0 after 35 usecs
>[  161.753949] calling  0000:00:14.0+ @ 3211, parent: pci0000:00
>[  161.754085] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>[  161.764740] call 0000:00:14.0+ returned 0 after 10531 usecs
>[  161.764743] calling  0000:00:03.0+ @ 3211, parent: pci0000:00
>[  161.764745] call 0000:00:03.0+ returned 0 after 0 usecs
>[  161.764747] calling  0000:00:02.0+ @ 3211, parent: pci0000:00
>[  161.764749] call 0000:00:02.0+ returned 0 after 0 usecs
>[  161.764752] calling  0000:00:00.0+ @ 3211, parent: pci0000:00
>[  161.764776] call 0000:00:00.0+ returned 0 after 22 usecs
>[  161.764947] PM: noirq suspend of devices complete after 22.963 msecs
>[  161.765316] ACPI: Preparing to enter system sleep state S3
>[  161.769737] PM: Saving platform NVS memory
>[  161.774722] Disabling non-boot CPUs ...
>[  161.779636] smpboot: CPU 1 is now offline
>[  161.786028] smpboot: CPU 2 is now offline
>[  161.789503] smpboot: CPU 3 is now offline
>[  161.790682] PM: Calling mce_syscore_suspend+0x0/0x10
>[  161.790690] PM: Calling acpi_processor_suspend+0x0/0x1e
>[  161.790694] PM: Calling timekeeping_suspend+0x0/0x17d
>[  161.790756] PM: Calling save_ioapic_entries+0x0/0x6a
>[  161.790895] PM: Calling i8259A_suspend+0x0/0x28
>[  161.790900] PM: Calling fw_suspend+0x0/0x17
>[  161.790905] PM: Calling cpufreq_bp_suspend+0x0/0x67
>[  161.790913] PM: Calling lapic_suspend+0x0/0x18a
>[  161.792220] ACPI: Low-level resume complete
>[  161.792383] PM: Restoring platform NVS memory
>[  161.792551] PM: Calling lapic_resume+0x0/0x22f
>[  161.792594] PM: Calling cpufreq_bp_resume+0x0/0x6b
>[  161.792817] PM: Calling irqrouter_resume+0x0/0x3f
>[  161.792821] PM: Calling i8259A_resume+0x0/0x2d
>[  161.792979] PM: Calling i8237A_resume+0x0/0x8c
>[  161.793178] PM: Calling ioapic_resume+0x0/0x7c
>[  161.793238] PM: Calling irq_pm_syscore_resume+0x0/0x15
>[  161.793252] PM: Calling timekeeping_resume+0x0/0x193
>[  161.793514] PM: Calling acpi_processor_resume+0x0/0x2f
>[  161.793520] PM: Calling mce_syscore_resume+0x0/0x25
>[  161.793830] Enabling non-boot CPUs ...
>[  161.794044] x86: Booting SMP configuration:
>[  161.794046] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[  161.813741] CPU1 is up
>[  161.813902] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[  161.832790] CPU2 is up
>[  161.832946] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[  161.852212] CPU3 is up
>[  161.858371] ACPI: Waking up from system sleep state S3
>[  161.902881] calling  0000:00:00.0+ @ 3211, parent: pci0000:00
>[  161.902910] call 0000:00:00.0+ returned 0 after 25 usecs
>[  161.902912] calling  0000:00:02.0+ @ 3211, parent: pci0000:00
>[  161.913414] call 0000:00:02.0+ returned 0 after 10248 usecs
>[  161.913416] calling  0000:00:03.0+ @ 3211, parent: pci0000:00
>[  161.924406] call 0000:00:03.0+ returned 0 after 10725 usecs
>[  161.924408] calling  0000:00:14.0+ @ 3211, parent: pci0000:00
>[  161.935579] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
>[  161.935612] call 0000:00:14.0+ returned 0 after 10935 usecs
>[  161.935615] calling  0000:00:16.0+ @ 3211, parent: pci0000:00
>[  161.935697] call 0000:00:16.0+ returned 0 after 78 usecs
>[  161.935699] calling  0000:00:1b.0+ @ 3211, parent: pci0000:00
>[  161.946466] call 0000:00:1b.0+ returned 0 after 10508 usecs
>[  161.946468] calling  0000:00:1c.0+ @ 3211, parent: pci0000:00
>[  161.946638] call 0000:00:1c.0+ returned 0 after 163 usecs
>[  161.946640] calling  0000:00:1c.2+ @ 3211, parent: pci0000:00
>[  161.946793] call 0000:00:1c.2+ returned 0 after 148 usecs
>[  161.946795] calling  0000:00:1c.3+ @ 3211, parent: pci0000:00
>[  161.946949] call 0000:00:1c.3+ returned 0 after 148 usecs
>[  161.946951] calling  0000:00:1d.0+ @ 3211, parent: pci0000:00
>[  161.957771] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[  161.957784] call 0000:00:1d.0+ returned 0 after 10573 usecs
>[  161.957787] calling  0000:00:1f.0+ @ 3211, parent: pci0000:00
>[  161.957857] call 0000:00:1f.0+ returned 0 after 67 usecs
>[  161.957859] calling  0000:00:1f.2+ @ 3211, parent: pci0000:00
>[  161.968488] call 0000:00:1f.2+ returned 0 after 10373 usecs
>[  161.968490] calling  0000:00:1f.3+ @ 3211, parent: pci0000:00
>[  161.968538] call 0000:00:1f.3+ returned 0 after 45 usecs
>[  161.968542] calling  0000:02:00.0+ @ 3211, parent: 0000:00:1c.2
>[  161.968657] call 0000:02:00.0+ returned 0 after 110 usecs
>[  161.969012] PM: noirq resume of devices complete after 66.230 msecs
>[  161.969246] calling  ACPI0003:00+ @ 3211, parent: platform
>[  161.969250] call ACPI0003:00+ returned 0 after 2 usecs
>[  161.969734] PM: early resume of devices complete after 0.676 msecs
>[  161.969959] calling  0000:00:02.0+ @ 3251, parent: pci0000:00
>[  161.969962] calling  0000:00:00.0+ @ 3250, parent: pci0000:00
>[  161.969966] call 0000:00:00.0+ returned 0 after 1 usecs
>[  161.969978] calling  0000:00:03.0+ @ 3250, parent: pci0000:00
>[  161.970796] calling  PNP0C0A:00+ @ 3211, parent: device:00
>[  161.972791] calling  0000:00:14.0+ @ 3246, parent: pci0000:00
>[  161.973041] call 0000:00:14.0+ returned 0 after 241 usecs
>[  161.973052] calling  0000:00:16.0+ @ 3246, parent: pci0000:00
>[  161.973054] call 0000:00:16.0+ returned 0 after 0 usecs
>[  161.973060] calling  0000:00:1b.0+ @ 3246, parent: pci0000:00
>[  161.973229] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
>[  161.973622] calling  0000:00:1c.0+ @ 3244, parent: pci0000:00
>[  161.973633] calling  0000:00:1c.2+ @ 3242, parent: pci0000:00
>[  161.973639] call 0000:00:1c.0+ returned 0 after 12 usecs
>[  161.973650] call 0000:00:1c.2+ returned 0 after 13 usecs
>[  161.973653] calling  0000:00:1c.3+ @ 3244, parent: pci0000:00
>[  161.973663] calling  0000:00:1d.0+ @ 3242, parent: pci0000:00
>[  161.973666] call 0000:00:1c.3+ returned 0 after 10 usecs
>[  161.973677] calling  0000:00:1f.0+ @ 3244, parent: pci0000:00
>[  161.973681] call 0000:00:1f.0+ returned 0 after 1 usecs
>[  161.973690] calling  0000:00:1f.2+ @ 3244, parent: pci0000:00
>[  161.973737] calling  0000:00:1f.3+ @ 28, parent: pci0000:00
>[  161.973770] calling  0000:02:00.0+ @ 1001, parent: 0000:00:1c.2
>[  161.973773] call 0000:02:00.0+ returned 0 after 1 usecs
>[  161.973963] [drm:intel_opregion_setup], graphic opregion physical addr: 0x90fb1018
>[  161.974026] [drm:intel_opregion_setup], Public ACPI methods supported
>[  161.974028] [drm:intel_opregion_setup], SWSCI supported
>[  161.974390] calling  usb2+ @ 3256, parent: 0000:00:14.0
>[  161.975530] calling  usb3+ @ 3269, parent: 0000:00:14.0
>[  161.975676] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
>[  161.976006] call usb3+ returned 0 after 461 usecs
>[  161.976409] call 0000:00:03.0+ returned 0 after 6274 usecs
>[  161.977654] call 0000:00:1d.0+ returned 0 after 3892 usecs
>[  161.977668] calling  usb1+ @ 6, parent: 0000:00:1d.0
>[  161.979420] call 0000:00:1f.3+ returned 0 after 5543 usecs
>[  161.981726] call 0000:00:1b.0+ returned 0 after 8456 usecs
>[  161.984407] call 0000:00:1f.2+ returned 0 after 10458 usecs
>[  161.984422] calling  ata1+ @ 3243, parent: 0000:00:1f.2
>[  161.984425] calling  ata2+ @ 1001, parent: 0000:00:1f.2
>[  161.984429] calling  ata3+ @ 3241, parent: 0000:00:1f.2
>[  161.984489] call ata3+ returned 0 after 55 usecs
>[  161.984502] calling  host2+ @ 3249, parent: ata3
>[  161.984507] call host2+ returned 0 after 2 usecs
>[  162.009608] call usb1+ returned 0 after 31174 usecs
>[  162.009637] calling  1-1+ @ 3275, parent: usb1
>[  162.026437] [drm:swsci], SWSCI request timed out
>[  162.026439] [drm:swsci], SWSCI request already in progress
>[  162.026441] [drm:swsci_setup], SWSCI GBDA callbacks 00000001, SBCB callbacks 00000001
>[  162.026442] [drm:intel_opregion_setup], ASLE supported
>[  162.026688] [drm:init_status_page], render ring hws offset: 0x00000000
>[  162.028604] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
>[  162.028687] [drm:init_status_page], bsd ring hws offset: 0x00022000
>[  162.029007] [drm:init_status_page], blitter ring hws offset: 0x00043000
>[  162.029315] [drm:init_status_page], video enhancement ring hws offset: 0x00064000
>[  162.029857] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
>[  162.029862] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
>[  162.029866] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
>[  162.029870] [drm:intel_modeset_readout_hw_state], [ENCODER:9:TMDS-9] hw state readout: disabled, pipe A
>[  162.029874] [drm:intel_modeset_readout_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A
>[  162.029877] [drm:intel_modeset_readout_hw_state], [CONNECTOR:10:eDP-1] hw state readout: disabled
>[  162.029880] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:HDMI-A-1] hw state readout: disabled
>[  162.029887] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
>[  162.029888] [drm:intel_dump_pipe_config], cpu_transcoder: A
>[  162.029890] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  162.029892] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  162.029894] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  162.029895] [drm:intel_dump_pipe_config], requested mode:
>[  162.029898] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  162.029899] [drm:intel_dump_pipe_config], adjusted mode:
>[  162.029902] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  162.029904] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  162.029906] [drm:intel_dump_pipe_config], port clock: 0
>[  162.029907] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[  162.029909] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  162.029911] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  162.029912] [drm:intel_dump_pipe_config], ips: 0
>[  162.029913] [drm:intel_dump_pipe_config], double wide: 0
>[  162.029916] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
>[  162.029917] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  162.029919] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  162.029921] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  162.029922] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  162.029923] [drm:intel_dump_pipe_config], requested mode:
>[  162.029926] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  162.029927] [drm:intel_dump_pipe_config], adjusted mode:
>[  162.029929] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  162.029931] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  162.029932] [drm:intel_dump_pipe_config], port clock: 0
>[  162.029934] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[  162.029935] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  162.029937] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  162.029938] [drm:intel_dump_pipe_config], ips: 0
>[  162.029939] [drm:intel_dump_pipe_config], double wide: 0
>[  162.029942] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
>[  162.029943] [drm:intel_dump_pipe_config], cpu_transcoder: C
>[  162.029944] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  162.029946] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  162.029948] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  162.029949] [drm:intel_dump_pipe_config], requested mode:
>[  162.029951] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  162.029952] [drm:intel_dump_pipe_config], adjusted mode:
>[  162.029954] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  162.029956] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  162.029957] [drm:intel_dump_pipe_config], port clock: 0
>[  162.029959] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[  162.029960] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  162.029962] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  162.029963] [drm:intel_dump_pipe_config], ips: 0
>[  162.029964] [drm:intel_dump_pipe_config], double wide: 0
>[  162.029990] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  162.030007] [drm:connected_sink_compute_bpp], [CONNECTOR:10:eDP-1] checking for sink bpp constrains
>[  162.030009] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
>[  162.030012] [drm:intel_dp_compute_config], DP link computation with max lane count 1 max bw 0a pixel clock 75600KHz
>[  162.030014] [drm:intel_dp_compute_config], DP link bw 0a lane count 1 clock 270000 bpp 18
>[  162.030016] [drm:intel_dp_compute_config], DP link bw required 136080 available 216000
>[  162.030018] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[  162.030020] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[  162.030021] [drm:intel_dump_pipe_config], cpu_transcoder: P
>[  162.030023] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[  162.030025] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  162.030027] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 2642411, gmch_n: 4194304, link_m: 146800, link_n: 524288, tu: 64
>[  162.030028] [drm:intel_dump_pipe_config], requested mode:
>[  162.030031] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
>[  162.030032] [drm:intel_dump_pipe_config], adjusted mode:
>[  162.030035] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
>[  162.030037] [drm:intel_dump_crtc_timings], crtc timings: 75600 1366 1404 1426 1592 768 771 777 790, type: 0x48 flags: 0xa
>[  162.030038] [drm:intel_dump_pipe_config], port clock: 270000
>[  162.030040] [drm:intel_dump_pipe_config], pipe src size: 1366x768
>[  162.030041] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  162.030043] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  162.030044] [drm:intel_dump_pipe_config], ips: 1
>[  162.030045] [drm:intel_dump_pipe_config], double wide: 0
>[  162.030128] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 5504
>[  162.030136] [drm:intel_crtc_mode_set], [ENCODER:9:TMDS-9] set [MODE:0:1366x768]
>[  162.030138] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
>[  162.030144] [drm:ironlake_edp_panel_on], Turn eDP power on
>[  162.030147] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[  162.030152] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[  162.030154] [drm:ironlake_wait_panel_status], Wait complete
>[  162.030159] [drm:ironlake_wait_panel_on], Wait for panel power on
>[  162.030163] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd0003
>[  162.096885] call PNP0C0A:00+ returned 0 after 123078 usecs
>[  162.096891] calling  PNP0C0D:00+ @ 3211, parent: device:00
>[  162.098527] call PNP0C0D:00+ returned 0 after 1593 usecs
>[  162.098531] calling  PNP0C0C:00+ @ 3211, parent: device:00
>[  162.098534] call PNP0C0C:00+ returned 0 after 0 usecs
>[  162.098546] calling  LNXTHERM:00+ @ 3211, parent: device:4a
>[  162.103264] call LNXTHERM:00+ returned 0 after 4602 usecs
>[  162.103282] calling  VPC2004:00+ @ 3211, parent: platform
>[  162.103285] call VPC2004:00+ returned 0 after 0 usecs
>[  162.103289] calling  ACPI0003:00+ @ 3211, parent: platform
>[  162.106303] call ACPI0003:00+ returned 0 after 2938 usecs
>[  162.106309] calling  LNXPWRBN:00+ @ 3211, parent: LNXSYSTM:00
>[  162.106311] call LNXPWRBN:00+ returned 0 after 0 usecs
>[  162.106322] calling  00:00+ @ 3211, parent: pnp0
>[  162.106324] call 00:00+ returned 0 after 0 usecs
>[  162.106328] calling  00:01+ @ 3211, parent: pnp0
>[  162.106329] call 00:01+ returned 0 after 0 usecs
>[  162.106333] calling  00:02+ @ 3211, parent: pnp0
>[  162.106335] call 00:02+ returned 0 after 0 usecs
>[  162.106338] calling  00:03+ @ 3211, parent: pnp0
>[  162.106342] call 00:03+ returned 0 after 2 usecs
>[  162.106345] calling  00:04+ @ 3211, parent: pnp0
>[  162.106352] call 00:04+ returned 0 after 4 usecs
>[  162.106355] calling  00:05+ @ 3211, parent: pnp0
>[  162.106359] call 00:05+ returned 0 after 2 usecs
>[  162.106362] calling  00:06+ @ 3211, parent: pnp0
>[  162.106370] dpm_run_callback(): pnp_bus_resume+0x0/0x95 returns -19
>[  162.106372] call 00:06+ returned -19 after 7 usecs
>[  162.106375] PM: Device 00:06 failed to resume: error -19
>[  162.106377] calling  00:07+ @ 3211, parent: pnp0
>[  162.106381] call 00:07+ returned 0 after 2 usecs
>[  162.106384] calling  00:08+ @ 3211, parent: pnp0
>[  162.106388] call 00:08+ returned 0 after 2 usecs
>[  162.106575] calling  pcspkr+ @ 3211, parent: platform
>[  162.106577] call pcspkr+ returned 0 after 0 usecs
>[  162.106581] calling  platform-framebuffer.0+ @ 3211, parent: platform
>[  162.106583] call platform-framebuffer.0+ returned 0 after 0 usecs
>[  162.106592] calling  alarmtimer+ @ 3211, parent: platform
>[  162.106594] call alarmtimer+ returned 0 after 0 usecs
>[  162.106649] calling  serial8250+ @ 3211, parent: platform
>[  162.106652] call serial8250+ returned 0 after 1 usecs
>[  162.111494] call 1-1+ returned 0 after 99424 usecs
>[  162.170519] call usb2+ returned 0 after 191448 usecs
>[  162.170547] calling  2-5+ @ 3242, parent: usb2
>[  162.170560] calling  2-6+ @ 3297, parent: usb2
>[  162.170570] calling  2-4+ @ 3286, parent: usb2
>[  162.238543] [drm:ironlake_wait_panel_status], Wait complete
>[  162.239778] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  162.240281] [drm:intel_dp_start_link_train], clock recovery OK
>[  162.241085] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[  162.289555] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  162.292522] [drm:g4x_wait_for_vblank], vblank wait timed out
>[  162.292708] [drm:ironlake_edp_backlight_on], 
>[  162.292715] [drm:intel_panel_enable_backlight], pipe A
>[  162.292739] [drm:intel_panel_actually_set_backlight], set backlight PWM = 765
>[  162.292747] [drm:intel_edp_psr_match_conditions], PSR disable by flag
>[  162.294243] ata1.00: configured for UDMA/133
>[  162.294268] call ata1+ returned 0 after 302452 usecs
>[  162.294287] calling  host0+ @ 1160, parent: ata1
>[  162.294294] call host0+ returned 0 after 3 usecs
>[  162.294318] calling  target0:0:0+ @ 3271, parent: host0
>[  162.294322] call target0:0:0+ returned 0 after 1 usecs
>[  162.294335] calling  0:0:0:0+ @ 3270, parent: target0:0:0
>[  162.294343] sd 0:0:0:0: [sda] Starting disk
>[  162.294830] call 0:0:0:0+ returned 0 after 479 usecs
>[  162.323939] usb 2-5: reset high-speed USB device number 3 using xhci_hcd
>[  162.326580] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[  162.342627] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  162.342648] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  162.342659] [drm:intel_connector_check_state], [CONNECTOR:10:eDP-1]
>[  162.342664] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
>[  162.342666] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
>[  162.342669] [drm:check_crtc_state], [CRTC:3]
>[  162.342685] [drm:check_crtc_state], [CRTC:5]
>[  162.342689] [drm:check_crtc_state], [CRTC:7]
>[  162.342737] [drm:intel_resume_hotplug], running encoder hotplug functions
>[  162.343257] [drm:intel_dp_get_dpcd], DPCD: 11 0a 81 41 00 00 01 80 02 00 00 00 0f 07 00
>[  162.343780] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
>[  162.343980] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  162.343984] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  162.343988] [drm:drm_helper_hpd_irq_event], [CONNECTOR:18:HDMI-A-1] status updated from unknown to disconnected
>[  162.344236] [drm:drm_fb_helper_hotplug_event], 
>[  162.344240] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[  162.344243] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[  162.344247] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
>[  162.344257] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  162.344450] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[  162.344637] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[  162.344739] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  162.344748] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[  162.344754] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
>[  162.344756] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
>[  162.344759] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
>[  162.344940] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  162.344944] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  162.344947] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] disconnected
>[  162.344952] [drm:drm_setup_crtcs], 
>[  162.344997] [drm:drm_enable_connectors], connector 10 enabled? yes
>[  162.344999] [drm:drm_enable_connectors], connector 18 enabled? no
>[  162.345002] [drm:drm_target_preferred], looking for cmdline mode on connector 10
>[  162.345004] [drm:drm_target_preferred], looking for preferred mode on connector 10
>[  162.345007] [drm:drm_target_preferred], found mode 1366x768
>[  162.345009] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[  162.345030] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3
>[  162.345076] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[  162.345123] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[  162.345126] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[  162.345138] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[  162.345185] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  162.345188] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[  162.345199] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[  162.345244] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[  162.345247] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[  162.354782] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[  162.354833] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[  162.354836] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[  162.355569] call 0000:00:02.0+ returned 0 after 376410 usecs
>[  162.362685] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008c715640
>[  162.362689] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008c715680
>[  162.364728] call 2-5+ returned 0 after 189547 usecs
>[  162.489524] usb 2-6: reset full-speed USB device number 4 using xhci_hcd
>[  162.501457] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880159ffd300
>[  162.501461] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880159ffd340
>[  162.501464] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880159ffd380
>[  162.501467] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880156d61280
>[  162.501470] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880156d612c0
>[  162.502346] call 2-6+ returned 0 after 323870 usecs
>[  162.654124] usb 2-4: reset high-speed USB device number 2 using xhci_hcd
>[  162.672802] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008c5a0780
>[  162.672805] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008c5a07c0
>[  162.672807] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008c5a0800
>[  162.673322] asix 2-4:1.0 enp0s20u4: unregister 'asix' usb-0000:00:14.0-4, ASIX AX88772 USB 2.0 Ethernet
>[  162.683360] call 2-4+ returned 0 after 500559 usecs
>[  163.788217] [drm:intel_print_rc6_info], Haswell: only RC6 available
>[  163.788219] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  163.922291] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  164.032071] ata2.00: configured for UDMA/133
>[  164.032104] call ata2+ returned 0 after 1998846 usecs
>[  164.032147] calling  host1+ @ 3245, parent: ata2
>[  164.032154] call host1+ returned 0 after 3 usecs
>[  164.032184] calling  target1:0:0+ @ 3272, parent: host1
>[  164.032189] call target1:0:0+ returned 0 after 2 usecs
>[  164.032201] calling  1:0:0:0+ @ 3273, parent: target1:0:0
>[  164.032205] calling  i8042+ @ 3211, parent: platform
>[  164.032208] sd 1:0:0:0: [sdb] Starting disk
>[  164.034309] call i8042+ returned 0 after 2050 usecs
>[  164.034313] calling  serio0+ @ 3211, parent: i8042
>[  164.034553] call serio0+ returned 0 after 232 usecs
>[  164.034679] calling  serio1+ @ 3211, parent: i8042
>[  164.034690] call serio1+ returned 0 after 8 usecs
>[  164.034701] calling  rtc0+ @ 3211, parent: 00:04
>[  164.034703] call rtc0+ returned 0 after 0 usecs
>[  164.034719] calling  input0+ @ 3211, parent: serio0
>[  164.034990] call input0+ returned 0 after 262 usecs
>[  164.056143] call 1:0:0:0+ returned 0 after 23367 usecs
>[  164.056202] calling  input3+ @ 3211, parent: PNP0C0D:00
>[  164.056208] call input3+ returned 0 after 3 usecs
>[  164.056214] calling  input4+ @ 3211, parent: PNP0C0C:00
>[  164.056446] call input4+ returned 0 after 223 usecs
>[  164.056466] calling  input5+ @ 3211, parent: LNXPWRBN:00
>[  164.056482] call input5+ returned 0 after 13 usecs
>[  164.056503] calling  controlD64+ @ 3211, parent: 0000:00:02.0
>[  164.056506] call controlD64+ returned 0 after 0 usecs
>[  164.056510] calling  card0+ @ 3211, parent: 0000:00:02.0
>[  164.056512] call card0+ returned 0 after 0 usecs
>[  164.056516] calling  i2c-0+ @ 3211, parent: 0000:00:02.0
>[  164.056518] call i2c-0+ returned 0 after 0 usecs
>[  164.056524] calling  i2c-1+ @ 3211, parent: 0000:00:02.0
>[  164.056526] call i2c-1+ returned 0 after 0 usecs
>[  164.056532] calling  i2c-2+ @ 3211, parent: 0000:00:02.0
>[  164.056534] call i2c-2+ returned 0 after 0 usecs
>[  164.056540] calling  i2c-3+ @ 3211, parent: 0000:00:02.0
>[  164.056542] call i2c-3+ returned 0 after 0 usecs
>[  164.056548] calling  i2c-4+ @ 3211, parent: 0000:00:02.0
>[  164.056550] call i2c-4+ returned 0 after 0 usecs
>[  164.056556] calling  i2c-5+ @ 3211, parent: 0000:00:02.0
>[  164.056557] call i2c-5+ returned 0 after 0 usecs
>[  164.056563] calling  card0-eDP-1+ @ 3211, parent: card0
>[  164.056565] call card0-eDP-1+ returned 0 after 0 usecs
>[  164.056568] calling  i2c-6+ @ 3211, parent: card0-eDP-1
>[  164.056570] call i2c-6+ returned 0 after 0 usecs
>[  164.056576] calling  intel_backlight+ @ 3211, parent: card0-eDP-1
>[  164.056580] call intel_backlight+ returned 0 after 1 usecs
>[  164.056583] calling  card0-HDMI-A-1+ @ 3211, parent: card0
>[  164.056585] call card0-HDMI-A-1+ returned 0 after 0 usecs
>[  164.056594] calling  input2+ @ 3211, parent: serio1
>[  164.056597] call input2+ returned 0 after 1 usecs
>[  164.056606] calling  acpi_video0+ @ 3211, parent: 0000:00:02.0
>[  164.056609] call acpi_video0+ returned 0 after 1 usecs
>[  164.056615] calling  input6+ @ 3211, parent: LNXVIDEO:00
>[  164.056629] call input6+ returned 0 after 11 usecs
>[  164.056646] calling  input7+ @ 3211, parent: pcspkr
>[  164.056674] call input7+ returned 0 after 25 usecs
>[  164.056681] calling  iTCO_wdt+ @ 3211, parent: 0000:00:1f.0
>[  164.056683] call iTCO_wdt+ returned 0 after 0 usecs
>[  164.056697] calling  input8+ @ 3211, parent: 2-5:1.0
>[  164.056708] call input8+ returned 0 after 9 usecs
>[  164.056779] PM: resume of devices complete after 2086.171 msecs
>[  164.361933] asix 2-4:1.0 eth0: register 'asix' at usb-0000:00:14.0-4, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:b1:df:6f
>[  164.364080] PM: Finishing wakeup.
>[  164.364083] Restarting tasks ... done.
>[  164.364911] video LNXVIDEO:00: Restoring backlight state
>[  164.427856] systemd-udevd[3307]: renamed network interface eth0 to enp0s20u4
>[  165.356901] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
>[  165.356915] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  165.504217] IPv6: ADDRCONF(NETDEV_UP): enp0s20u4: link is not ready
>[  168.888523] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20u4: link becomes ready
>[  168.889468] asix 2-4:1.0 enp0s20u4: link up, 100Mbps, full-duplex, lpa 0xC5E1

Actions: View

Attachments on bug 72211: 90071 | 90296 | 90856 | 90963 | 92908 | 94050 | 94865 | 95008 | 95206

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.