Attachment 90730 Details for Bug 72648 – dmesg for 3.13.0-rc3-x2a-00302-g8d27637

dmesg for 3.13.0-rc3-x2a-00302-g8d27637

dmesg (text/plain), 62.89 KB, created by Jim Cromie on 2013-12-13 16:18:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jim Cromie

Created: 2013-12-13 16:18:34 UTC

Size: 62.89 KB

patch

obsolete

> Initializing cgroup subsys cpuset
> Initializing cgroup subsys cpu
> Initializing cgroup subsys cpuacct
> Linux version 3.13.0-rc3-x2a-00302-g8d27637 (jimc@groucho.jimc.earth) (gcc version 4.8.2 20131017 (Red Hat 4.8.2-1) (GCC) ) #101 SMP Fri Dec 13 00:04:13 MST 2013
> Command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc3-x2a-00302-g8d27637 root=/dev/mapper/vg_groucho-lv_root ro quiet rhgb radeon.dyndbg radeon.dpm=-1 radeon.aspm=-1 printk.time=0 drm_kms_helper.edid_firmware=VGA-1:edid/1920x1080.bin LANG=en_US.UTF-8
> e820: BIOS-provided physical RAM map:
> BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
> BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
> BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
> BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
> BIOS-e820: [mem 0x00000000cff80000-0x00000000cff8dfff] ACPI data
> BIOS-e820: [mem 0x00000000cff8e000-0x00000000cffb7fff] ACPI NVS
> BIOS-e820: [mem 0x00000000cffbc000-0x00000000cffedfff] reserved
> BIOS-e820: [mem 0x00000000cfff0000-0x00000000cfffffff] reserved
> BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
> BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
> NX (Execute Disable) protection: active
> SMBIOS 2.5 present.
> DMI: Dell Inc. Inspiron 546 /0F896N, BIOS A11 01/19/2010
> e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
> e820: remove [mem 0x000a0000-0x000fffff] usable
> No AGP bridge found
> e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
> MTRR default type: uncachable
> MTRR fixed ranges enabled:
>   00000-9FFFF write-back
>   A0000-EFFFF uncachable
>   F0000-FFFFF write-protect
> MTRR variable ranges enabled:
>   0 base 000000000000 mask FFFF80000000 write-back
>   1 base 000080000000 mask FFFFC0000000 write-back
>   2 base 0000C0000000 mask FFFFF0000000 write-back
>   3 disabled
>   4 disabled
>   5 disabled
>   6 disabled
>   7 disabled
> TOM2: 0000000230000000 aka 8960M
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
> e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
> found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
> Base memory trampoline at [ffff880000099000] 99000 size 24576
> Using GB pages for direct mapping
> init_memory_mapping: [mem 0x00000000-0x000fffff]
>  [mem 0x00000000-0x000fffff] page 4k
> BRK [0x02030000, 0x02030fff] PGTABLE
> BRK [0x02031000, 0x02031fff] PGTABLE
> BRK [0x02032000, 0x02032fff] PGTABLE
> init_memory_mapping: [mem 0x22fe00000-0x22fffffff]
>  [mem 0x22fe00000-0x22fffffff] page 2M
> BRK [0x02033000, 0x02033fff] PGTABLE
> init_memory_mapping: [mem 0x22c000000-0x22fdfffff]
>  [mem 0x22c000000-0x22fdfffff] page 2M
> init_memory_mapping: [mem 0x200000000-0x22bffffff]
>  [mem 0x200000000-0x22bffffff] page 2M
> init_memory_mapping: [mem 0x00100000-0xcff7ffff]
>  [mem 0x00100000-0x001fffff] page 4k
>  [mem 0x00200000-0x3fffffff] page 2M
>  [mem 0x40000000-0xbfffffff] page 1G
>  [mem 0xc0000000-0xcfdfffff] page 2M
>  [mem 0xcfe00000-0xcff7ffff] page 4k
> init_memory_mapping: [mem 0x100000000-0x1ffffffff]
>  [mem 0x100000000-0x1ffffffff] page 1G
> RAMDISK: [mem 0x36c50000-0x3761ffff]
> ACPI: RSDP 00000000000fa6e0 000024 (v02 ACPIAM)
> ACPI: XSDT 00000000cff80100 000064 (v01 DELL    FX09    20100119 MSFT 00000097)
> ACPI: FACP 00000000cff80290 0000F4 (v03 DELL    FX09    20100119 MSFT 00000097)
> ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
> ACPI: DSDT 00000000cff80640 004AEE (v01  1AAAA 1AAAA000 00000000 INTL 20051117)
> ACPI: FACS 00000000cff8e000 000040
> ACPI: APIC 00000000cff80390 00006C (v01 DELL    FX09    20100119 MSFT 00000097)
> ACPI: MCFG 00000000cff80400 00003C (v01 DELL   OEMMCFG  20100119 MSFT 00000097)
> ACPI: SLIC 00000000cff80440 000176 (v01 DELL    FX09    20100119 MSFT 00000097)
> ACPI: OSFR 00000000cff805c0 000080 (v01 DELL    FX09    20100119 MSFT 00000097)
> ACPI: OEMB 00000000cff8e040 000071 (v01 DELL    FX09    20100119 MSFT 00000097)
> ACPI: HPET 00000000cff85130 000038 (v01 DELL   OEMHPET  20100119 MSFT 00000097)
> ACPI: SSDT 00000000cff85170 00088C (v01 A M I  POWERNOW 00000001 AMD  00000001)
> ACPI: Local APIC address 0xfee00000
> Scanning NUMA topology in Northbridge 24
> No NUMA configuration found
> Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
> Initmem setup node 0 [mem 0x00000000-0x22fffffff]
>   NODE_DATA [mem 0x22ffea000-0x22fffdfff]
>  [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
> Zone ranges:
>   DMA      [mem 0x00001000-0x00ffffff]
>   DMA32    [mem 0x01000000-0xffffffff]
>   Normal   [mem 0x100000000-0x22fffffff]
> Movable zone start for each node
> Early memory node ranges
>   node   0: [mem 0x00001000-0x0009efff]
>   node   0: [mem 0x00100000-0xcff7ffff]
>   node   0: [mem 0x100000000-0x22fffffff]
> On node 0 totalpages: 2096926
>   DMA zone: 64 pages used for memmap
>   DMA zone: 21 pages reserved
>   DMA zone: 3998 pages, LIFO batch:0
>   DMA32 zone: 13246 pages used for memmap
>   DMA32 zone: 847744 pages, LIFO batch:31
>   Normal zone: 19456 pages used for memmap
>   Normal zone: 1245184 pages, LIFO batch:31
> ACPI: PM-Timer IO Port: 0x808
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Using ACPI (MADT) for SMP configuration information
> ACPI: HPET id: 0x8300 base: 0xfed00000
> smpboot: Allowing 4 CPUs, 0 hotplug CPUs
> nr_irqs_gsi: 40
> PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
> PM: Registered nosave memory: [mem 0x000a0000-0x000e5fff]
> PM: Registered nosave memory: [mem 0x000e6000-0x000fffff]
> PM: Registered nosave memory: [mem 0xcff80000-0xcff8dfff]
> PM: Registered nosave memory: [mem 0xcff8e000-0xcffb7fff]
> PM: Registered nosave memory: [mem 0xcffb8000-0xcffbbfff]
> PM: Registered nosave memory: [mem 0xcffbc000-0xcffedfff]
> PM: Registered nosave memory: [mem 0xcffee000-0xcffeffff]
> PM: Registered nosave memory: [mem 0xcfff0000-0xcfffffff]
> PM: Registered nosave memory: [mem 0xd0000000-0xff6fffff]
> PM: Registered nosave memory: [mem 0xff700000-0xffffffff]
> e820: [mem 0xd0000000-0xff6fffff] available for PCI devices
> Booting paravirtualized kernel on bare hardware
> setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
> PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s85632 r8192 d20864 u524288
> pcpu-alloc: s85632 r8192 d20864 u524288 alloc=1*2097152
> pcpu-alloc: [0] 0 1 2 3 
> Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2064139
> Policy zone: Normal
> Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-rc3-x2a-00302-g8d27637 root=/dev/mapper/vg_groucho-lv_root ro quiet rhgb radeon.dyndbg radeon.dpm=-1 radeon.aspm=-1 printk.time=0 drm_kms_helper.edid_firmware=VGA-1:edid/1920x1080.bin LANG=en_US.UTF-8
> PID hash table entries: 4096 (order: 3, 32768 bytes)
> Checking aperture...
> No AGP bridge found
> Node 0: aperture @ 258c000000 size 32 MB
> Aperture beyond 4GB. Ignoring.
> Your BIOS doesn't leave a aperture memory hole
> Please enable the IOMMU option in the BIOS setup
> This costs you 64 MB of RAM
> Mapping aperture over 65536 KB of RAM @ c4000000
> PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
> Memory: 8097624K/8387704K available (6603K kernel code, 1005K rwdata, 2936K rodata, 1432K init, 1812K bss, 290080K reserved)
> SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> Hierarchical RCU implementation.
> 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
> NR_IRQS:8448 nr_irqs:712 16
> spurious 8259A interrupt: IRQ7.
> Console: colour VGA+ 80x25
> console [tty0] enabled
> allocated 33554432 bytes of page_cgroup
> please try 'cgroup_disable=memory' option if you don't want memory cgroups
> hpet clockevent registered
> tsc: Fast TSC calibration using PIT
> tsc: Detected 2799.976 MHz processor
> Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.95 BogoMIPS (lpj=2799976)
> pid_max: default: 32768 minimum: 301
> Security Framework initialized
> SELinux:  Initializing.
> SELinux:  Starting in permissive mode
> Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
> Mount-cache hash table entries: 256
> Initializing cgroup subsys memory
> Initializing cgroup subsys devices
> Initializing cgroup subsys freezer
> Initializing cgroup subsys net_cls
> Initializing cgroup subsys blkio
> Initializing cgroup subsys perf_event
> tseg: 0000000000
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> mce: CPU supports 6 MCE banks
> LVT offset 0 assigned for vector 0xf9
> process: using AMD E400 aware idle routine
> Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
>Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
>tlb_flushall_shift: 4
> Freeing SMP alternatives memory: 24K (ffffffff81e63000 - ffffffff81e69000)
> ACPI: Core revision 20131115
> ACPI: All ACPI Tables successfully acquired
> ftrace: allocating 25195 entries in 99 pages
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> smpboot: CPU0: AMD Athlon(tm) II X4 630 Processor (fam: 10, model: 05, stepping: 02)
> Performance Events: AMD PMU driver.
> ... version:                0
> ... bit width:              48
> ... generic registers:      4
> ... value mask:             0000ffffffffffff
> ... max period:             00007fffffffffff
> ... fixed-purpose events:   0
> ... event mask:             000000000000000f
> NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
> x86: Booting SMP configuration:
> .... node  #0, CPUs:      #1 #2 #3
> x86: Booted up 1 node, 4 CPUs
> smpboot: Total of 4 processors activated (22399.80 BogoMIPS)
> devtmpfs: initialized
> PM: Registering ACPI NVS region [mem 0xcff8e000-0xcffb7fff] (172032 bytes)
> atomic64 test passed for x86-64 platform with CX8 and with SSE
> RTC time:  8:16:34, date: 12/13/13
> NET: Registered protocol family 16
> cpuidle: using governor ladder
> cpuidle: using governor menu
> node 0 link 0: io port [1000, ffffff]
> TOM: 00000000d0000000 aka 3328M
> Fam 10h mmconf [mem 0xe0000000-0xefffffff]
> node 0 link 0: mmio [a0000, bffff]
> node 0 link 0: mmio [d0000000, dfffffff]
> node 0 link 0: mmio [e0000000, efffffff] ==> none
> node 0 link 0: mmio [f0000000, ffefffff]
> TOM2: 0000000230000000 aka 8960M
> bus: [bus 00-07] on node 0 link 0
> bus: 00 [io  0x0000-0xffff]
> bus: 00 [mem 0x000a0000-0x000bffff]
> bus: 00 [mem 0xd0000000-0xdfffffff]
> bus: 00 [mem 0xf0000000-0xffffffff]
> bus: 00 [mem 0x230000000-0xfcffffffff]
> ACPI: bus type PCI registered
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> PCI: not using MMCONFIG
> PCI: Using configuration type 1 for base access
> PCI: Using configuration type 1 for extended access
> mtrr: your CPUs had inconsistent variable MTRR settings
> mtrr: probably your BIOS does not setup all CPUs.
> mtrr: corrected configuration.
> bio: create slab <bio-0> at 0
> ACPI: Added _OSI(Module Device)
> ACPI: Added _OSI(Processor Device)
> ACPI: Added _OSI(3.0 _SCP Extensions)
> ACPI: Added _OSI(Processor Aggregator Device)
> ACPI: Executed 4 blocks of module-level executable AML code
> ACPI: Interpreter enabled
> ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
> ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
> ACPI: (supports S0 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
> PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> ACPI: No dock devices found.
> ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
> acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
> ACPI: \_SB_.PCI0.PCIE: can't evaluate _ADR (0x5)
> PCI host bridge to bus 0000:00
> pci_bus 0000:00: root bus resource [bus 00-ff]
> pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
> pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
> pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
> pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
> pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
> pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
> pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
> pci 0000:00:02.0: [1022:9603] type 01 class 0x060400
> pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:02.0: System wakeup disabled by ACPI
> pci 0000:00:07.0: [1022:9607] type 01 class 0x060400
> pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:07.0: System wakeup disabled by ACPI
> pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
> pci 0000:00:11.0: reg 0x10: [io  0xb000-0xb007]
> pci 0000:00:11.0: reg 0x14: [io  0xa000-0xa003]
> pci 0000:00:11.0: reg 0x18: [io  0x9000-0x9007]
> pci 0000:00:11.0: reg 0x1c: [io  0x8000-0x8003]
> pci 0000:00:11.0: reg 0x20: [io  0x7000-0x700f]
> pci 0000:00:11.0: reg 0x24: [mem 0xfe8ff800-0xfe8ffbff]
> pci 0000:00:11.0: set SATA to AHCI mode
> pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
> pci 0000:00:12.0: reg 0x10: [mem 0xfe8fe000-0xfe8fefff]
> pci 0000:00:12.0: System wakeup disabled by ACPI
> pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
> pci 0000:00:12.1: reg 0x10: [mem 0xfe8fd000-0xfe8fdfff]
> pci 0000:00:12.1: System wakeup disabled by ACPI
> pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
> pci 0000:00:12.2: reg 0x10: [mem 0xfe8ff000-0xfe8ff0ff]
> pci 0000:00:12.2: supports D1 D2
> pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
> pci 0000:00:12.2: System wakeup disabled by ACPI
> pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
> pci 0000:00:13.0: reg 0x10: [mem 0xfe8fc000-0xfe8fcfff]
> pci 0000:00:13.0: System wakeup disabled by ACPI
> pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
> pci 0000:00:13.1: reg 0x10: [mem 0xfe8fb000-0xfe8fbfff]
> pci 0000:00:13.1: System wakeup disabled by ACPI
> pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
> pci 0000:00:13.2: reg 0x10: [mem 0xfe8fa800-0xfe8fa8ff]
> pci 0000:00:13.2: supports D1 D2
> pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
> pci 0000:00:13.2: System wakeup disabled by ACPI
> pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
> pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
> pci 0000:00:14.1: reg 0x10: [io  0x0000-0x0007]
> pci 0000:00:14.1: reg 0x14: [io  0x0000-0x0003]
> pci 0000:00:14.1: reg 0x18: [io  0x0000-0x0007]
> pci 0000:00:14.1: reg 0x1c: [io  0x0000-0x0003]
> pci 0000:00:14.1: reg 0x20: [io  0xff00-0xff0f]
> pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
> pci 0000:00:14.2: reg 0x10: [mem 0xfe8f4000-0xfe8f7fff 64bit]
> pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
> pci 0000:00:14.2: System wakeup disabled by ACPI
> pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
> pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
> pci 0000:00:14.4: System wakeup disabled by ACPI
> pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
> pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
> pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
> pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
> pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
> pci 0000:01:00.0: [1002:68e1] type 00 class 0x030000
> pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
> pci 0000:01:00.0: reg 0x18: [mem 0xfe9e0000-0xfe9fffff 64bit]
> pci 0000:01:00.0: reg 0x20: [io  0xc000-0xc0ff]
> pci 0000:01:00.0: reg 0x30: [mem 0xfe9c0000-0xfe9dffff pref]
> pci 0000:01:00.0: supports D1 D2
> pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
> pci 0000:01:00.1: reg 0x10: [mem 0xfe9bc000-0xfe9bffff 64bit]
> pci 0000:01:00.1: supports D1 D2
> pci 0000:00:02.0: PCI bridge to [bus 01]
> pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
> pci 0000:00:02.0:   bridge window [mem 0xfe900000-0xfe9fffff]
> pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
> pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
> pci 0000:02:00.0: reg 0x10: [io  0xd800-0xd8ff]
> pci 0000:02:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
> pci 0000:02:00.0: reg 0x20: [mem 0xfdfe0000-0xfdfeffff 64bit pref]
> pci 0000:02:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
> pci 0000:02:00.0: supports D1 D2
> pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:00:07.0: PCI bridge to [bus 02]
> pci 0000:00:07.0:   bridge window [io  0xd000-0xdfff]
> pci 0000:00:07.0:   bridge window [mem 0xfea00000-0xfeafffff]
> pci 0000:00:07.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
> pci 0000:03:05.0: [11ad:0002] type 00 class 0x020000
> pci 0000:03:05.0: reg 0x10: [io  0xe800-0xe8ff]
> pci 0000:03:05.0: reg 0x14: [mem 0xfebffc00-0xfebffcff]
> pci 0000:03:05.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
> pci 0000:03:06.0: [104c:9066] type 00 class 0x028000
> pci 0000:03:06.0: reg 0x10: [mem 0xfebfc000-0xfebfdfff]
> pci 0000:03:06.0: reg 0x14: [mem 0xfebc0000-0xfebdffff]
> pci 0000:03:06.0: supports D1 D2
> pci 0000:03:06.0: PME# supported from D0 D1 D2 D3hot
> pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
> pci 0000:00:14.4:   bridge window [io  0xe000-0xefff]
> pci 0000:00:14.4:   bridge window [mem 0xfeb00000-0xfebfffff]
> pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
> pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
> pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
> pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
> pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
> pci 0000:00:14.4:   bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
> ACPI: PCI Interrupt Link [LNKA] (IRQs *4 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
> ACPI: \_SB_.PCI0: notify handler is installed
> Found 1 acpi root devices
> vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
> vgaarb: loaded
> vgaarb: bridge control possible 0000:01:00.0
> SCSI subsystem initialized
> libata version 3.00 loaded.
> ACPI: bus type USB registered
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> PCI: pci_cache_line_size set to 64 bytes
> e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
> e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
> NetLabel: Initializing
> NetLabel:  domain hash size = 128
> NetLabel:  protocols = UNLABELED CIPSOv4
> NetLabel:  unlabeled traffic allowed by default
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> hpet0: 4 comparators, 32-bit 14.318180 MHz counter
> Switched to clocksource hpet
> pnp: PnP ACPI init
> ACPI: bus type PNP registered
> system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
> pnp 00:01: [dma 4]
> pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
> pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
> pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
> pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
> system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
> system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
> system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
> system 00:07: [io  0x04d0-0x04d1] has been reserved
> system 00:07: [io  0x040b] has been reserved
> system 00:07: [io  0x04d6] has been reserved
> system 00:07: [io  0x0c00-0x0c01] has been reserved
> system 00:07: [io  0x0c14] has been reserved
> system 00:07: [io  0x0c50-0x0c51] has been reserved
> system 00:07: [io  0x0c52] has been reserved
> system 00:07: [io  0x0c6c] has been reserved
> system 00:07: [io  0x0c6f] has been reserved
> system 00:07: [io  0x0cd0-0x0cd1] has been reserved
> system 00:07: [io  0x0cd2-0x0cd3] has been reserved
> system 00:07: [io  0x0cd4-0x0cd5] has been reserved
> system 00:07: [io  0x0cd6-0x0cd7] has been reserved
> system 00:07: [io  0x0cd8-0x0cdf] has been reserved
> system 00:07: [io  0x0800-0x089f] could not be reserved
> system 00:07: [io  0x0b00-0x0b0f] has been reserved
> system 00:07: [io  0x0b20-0x0b3f] has been reserved
> system 00:07: [io  0x0900-0x090f] has been reserved
> system 00:07: [io  0x0910-0x091f] has been reserved
> system 00:07: [io  0xfe00-0xfefe] has been reserved
> system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
> system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
> system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
> system 00:08: [io  0x0e00-0x0e0f] has been reserved
> system 00:08: [io  0x0e80-0x0e8f] has been reserved
> system 00:08: [io  0x0f40-0x0f4f] has been reserved
> system 00:08: [io  0x0a30-0x0a3f] has been reserved
> system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
> system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
> system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
> system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
> system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
> system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
> system 00:0a: [mem 0x00100000-0xcfffffff] could not be reserved
> system 00:0a: [mem 0xfec00000-0xffffffff] could not be reserved
> system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
> pnp: PnP ACPI: found 11 devices
> ACPI: bus type PNP unregistered
> pci 0000:00:02.0: PCI bridge to [bus 01]
> pci 0000:00:02.0:   bridge window [io  0xc000-0xcfff]
> pci 0000:00:02.0:   bridge window [mem 0xfe900000-0xfe9fffff]
> pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
> pci 0000:00:07.0: PCI bridge to [bus 02]
> pci 0000:00:07.0:   bridge window [io  0xd000-0xdfff]
> pci 0000:00:07.0:   bridge window [mem 0xfea00000-0xfeafffff]
> pci 0000:00:07.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
> pci 0000:00:14.4: PCI bridge to [bus 03]
> pci 0000:00:14.4:   bridge window [io  0xe000-0xefff]
> pci 0000:00:14.4:   bridge window [mem 0xfeb00000-0xfebfffff]
> pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
> pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
> pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
> pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
> pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
> pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
> pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
> pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
> pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
> pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
> pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
> pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
> pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
> pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
> pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
> pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
> pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
> pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
> pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
> NET: Registered protocol family 2
> TCP established hash table entries: 65536 (order: 7, 524288 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 65536 bind 65536)
> TCP: reno registered
> UDP hash table entries: 4096 (order: 5, 131072 bytes)
> UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
> NET: Registered protocol family 1
> pci 0000:01:00.0: Boot video device
> PCI: CLS 64 bytes, default 64
> Unpacking initramfs...
> Freeing initrd memory: 10048K (ffff880036c50000 - ffff880037620000)
> PCI-DMA: Disabling AGP.
> PCI-DMA: aperture base @ c4000000 size 65536 KB
> PCI-DMA: using GART IOMMU.
> PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
> LVT offset 1 assigned for vector 0x400
> IBS: LVT offset 1 assigned
> perf: AMD IBS detected (0x0000001f)
> Initialise system trusted keyring
> audit: initializing netlink socket (disabled)
> type=2000 audit(1386922593.627:1): initialized
> HugeTLB registered 2 MB page size, pre-allocated 0 pages
> VFS: Disk quotas dquot_6.5.2
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> msgmni has been set to 15964
> Key type big_key registered
> SELinux:  Registering netfilter hooks
> alg: No test for stdrng (krng)
> NET: Registered protocol family 38
> Key type asymmetric registered
> Asymmetric key parser 'x509' registered
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> io scheduler noop registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
> pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
> ACPI: Power Button [PWRB]
> input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> ACPI: Power Button [PWRF]
> GHES: HEST is not enabled!
> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> Non-volatile memory driver v1.3
> Linux agpgart interface v0.103
> loop: module loaded
> ahci 0000:00:11.0: version 3.0
> ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
> ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
> scsi0 : ahci
> scsi1 : ahci
> scsi2 : ahci
> scsi3 : ahci
> ata1: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ff900 irq 22
> ata2: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ff980 irq 22
> ata3: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa00 irq 22
> ata4: SATA max UDMA/133 abar m1024@0xfe8ff800 port 0xfe8ffa80 irq 22
> libphy: Fixed MDIO Bus: probed
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> ehci-pci: EHCI PCI platform driver
> QUIRK: Enable AMD PLL fix
> ehci-pci 0000:00:12.2: EHCI Host Controller
> ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
> ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
> ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
> ehci-pci 0000:00:12.2: debug port 1
> ehci-pci 0000:00:12.2: irq 17, io mem 0xfe8ff000
> ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: EHCI Host Controller
> usb usb1: Manufacturer: Linux 3.13.0-rc3-x2a-00302-g8d27637 ehci_hcd
> usb usb1: SerialNumber: 0000:00:12.2
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 6 ports detected
> ehci-pci 0000:00:13.2: EHCI Host Controller
> ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
> ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
> ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
> ehci-pci 0000:00:13.2: debug port 1
> ehci-pci 0000:00:13.2: irq 19, io mem 0xfe8fa800
> ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: EHCI Host Controller
> usb usb2: Manufacturer: Linux 3.13.0-rc3-x2a-00302-g8d27637 ehci_hcd
> usb usb2: SerialNumber: 0000:00:13.2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 6 ports detected
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> ohci-pci: OHCI PCI platform driver
> ohci-pci 0000:00:12.0: OHCI PCI host controller
> ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
> ohci-pci 0000:00:12.0: irq 16, io mem 0xfe8fe000
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: OHCI PCI host controller
> usb usb3: Manufacturer: Linux 3.13.0-rc3-x2a-00302-g8d27637 ohci_hcd
> usb usb3: SerialNumber: 0000:00:12.0
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 3 ports detected
> ohci-pci 0000:00:12.1: OHCI PCI host controller
> ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
> ohci-pci 0000:00:12.1: irq 16, io mem 0xfe8fd000
> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: OHCI PCI host controller
> usb usb4: Manufacturer: Linux 3.13.0-rc3-x2a-00302-g8d27637 ohci_hcd
> usb usb4: SerialNumber: 0000:00:12.1
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 3 ports detected
> ohci-pci 0000:00:13.0: OHCI PCI host controller
> ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
> ohci-pci 0000:00:13.0: irq 18, io mem 0xfe8fc000
> usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb5: Product: OHCI PCI host controller
> usb usb5: Manufacturer: Linux 3.13.0-rc3-x2a-00302-g8d27637 ohci_hcd
> usb usb5: SerialNumber: 0000:00:13.0
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 3 ports detected
> ohci-pci 0000:00:13.1: OHCI PCI host controller
> ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
> ohci-pci 0000:00:13.1: irq 18, io mem 0xfe8fb000
> usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb6: Product: OHCI PCI host controller
> usb usb6: Manufacturer: Linux 3.13.0-rc3-x2a-00302-g8d27637 ohci_hcd
> usb usb6: SerialNumber: 0000:00:13.1
> hub 6-0:1.0: USB hub found
> hub 6-0:1.0: 3 ports detected
> uhci_hcd: USB Universal Host Controller Interface driver
> usbcore: registered new interface driver usbserial
> usbcore: registered new interface driver usbserial_generic
> usbserial: USB Serial support registered for generic
> i8042: PNP: No PS/2 controller found. Probing ports directly.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mousedev: PS/2 mouse device common for all mice
> rtc_cmos 00:02: RTC can wake from S4
> rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
> hidraw: raw HID events driver (C) Jiri Kosina
> usbcore: registered new interface driver usbhid
> usbhid: USB HID core driver
> drop_monitor: Initializing network drop monitor service
> ip_tables: (C) 2000-2006 Netfilter Core Team
> TCP: cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 10
> mip6: Mobile IPv6
> NET: Registered protocol family 17
> Loading compiled-in X.509 certificates
> Loaded X.509 cert 'Magrathea: Glacier signing key: 67d8707157d8ef6646d804c9bb08d348f6866f2a'
> registered taskstats version 1
>   Magic number: 9:579:270
> rtc_cmos 00:02: setting system clock to 2013-12-13 08:16:34 UTC (1386922594)
> PM: Hibernation image not present or could not be loaded.
> ata4: SATA link down (SStatus 0 SControl 300)
> usb 1-2: new high-speed USB device number 2 using ehci-pci
> usb 1-2: New USB device found, idVendor=0bda, idProduct=0181
> usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 1-2: Product: USB2.0-CRW
> usb 1-2: Manufacturer: Generic
> usb 1-2: SerialNumber: 20060413092100000
> ata1: softreset failed (device not ready)
> ata1: applying PMP SRST workaround and retrying
> ata3: softreset failed (device not ready)
> ata3: applying PMP SRST workaround and retrying
> ata2: softreset failed (device not ready)
> ata2: applying PMP SRST workaround and retrying
> usb 1-3: new high-speed USB device number 3 using ehci-pci
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ATA-8: ST31000528AS, CC45, max UDMA/133
> ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata1.00: configured for UDMA/133
> scsi 0:0:0:0: Direct-Access     ATA      ST31000528AS     CC45 PQ: 0 ANSI: 5
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> ata2.00: ATAPI: HL-DT-ST DVD+/-RW GH50N, B103, max UDMA/100
> ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01117, max UDMA7
> ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
> ata2.00: configured for UDMA/100
> scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GH50N    B103 PQ: 0 ANSI: 5
> ata3.00: configured for UDMA/133
> sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
> cdrom: Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> sr 1:0:0:0: Attached scsi generic sg1 type 5
> scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD103UJ  1AA0 PQ: 0 ANSI: 5
> sd 2:0:0:0: Attached scsi generic sg2 type 0
> sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
> sd 2:0:0:0: [sdb] Write Protect is off
> sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
> sd 0:0:0:0: [sda] Attached SCSI disk
>  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
> sd 2:0:0:0: [sdb] Attached SCSI disk
> Freeing unused kernel memory: 1432K (ffffffff81cfd000 - ffffffff81e63000)
> Write protecting the kernel read-only data: 12288k
> Freeing unused kernel memory: 1576K (ffff880001676000 - ffff880001800000)
> Freeing unused kernel memory: 1160K (ffff880001ade000 - ffff880001c00000)
> systemd[1]: RTC configured in localtime, applying delta of -420 minutes to system time.
> systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
> systemd[1]: Running in initial RAM disk.
> systemd[1]: Set hostname to <groucho.jimc.earth>.
> random: systemd urandom read with 35 bits of entropy available
> systemd[1]: Expecting device dev-mapper-vg_groucho\x2dlv_root.device...
> systemd[1]: Expecting device dev-mapper-vg_groucho\x2dlv_swap.device...
> systemd[1]: Expecting device dev-disk-by\x2duuid-1860838f\x2da4ab\x2d443b\x2dad5c\x2d660f9102cd34.device...
> systemd[1]: Starting Timers.
> systemd[1]: Reached target Timers.
> systemd[1]: Starting Journal Socket.
> systemd[1]: Listening on Journal Socket.
> systemd[1]: Starting dracut cmdline hook...
> systemd[1]: Starting Journal Service...
> systemd[1]: Started Journal Service.
> systemd[1]: Started Load Kernel Modules.
> systemd[1]: Starting udev Kernel Socket.
> systemd[1]: Listening on udev Kernel Socket.
> systemd[1]: Starting udev Control Socket.
> systemd[1]: Listening on udev Control Socket.
> systemd[1]: Starting Sockets.
> systemd[1]: Reached target Sockets.
> systemd[1]: Starting Swap.
> systemd[1]: Reached target Swap.
> systemd[1]: Starting Local File Systems.
> systemd[1]: Reached target Local File Systems.
> systemd-journald[70]: Vacuuming done, freed 0 bytes
> usb 1-3: New USB device found, idVendor=0ac8, idProduct=3420
> usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 1-3: Product: Venus USB2.0 Camera
> usb 1-3: Manufacturer: Vimicro Corp.
> systemd-udevd[141]: starting version 204
> [drm] Initialized drm 1.1.0 20060810
> [drm] radeon kernel modesetting enabled.
> [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E1 0x1787:0x3000).
> [drm] register mmio base: 0xFE9E0000
> [drm] register mmio size: 131072
> usb-storage 1-2:1.0: USB Mass Storage device detected
> ATOM BIOS: PARK
> radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
> radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
> [drm] Detected VRAM RAM=1024M, BAR=256M
> [drm] RAM width 64bits DDR
> scsi4 : usb-storage 1-2:1.0
> usbcore: registered new interface driver usb-storage
> scsi5 : pata_atiixp
> scsi6 : pata_atiixp
> ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
> ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
> [TTM] Zone  kernel: Available graphics memory: 4088908 kiB
> [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
> [TTM] Initializing pool allocator
> [TTM] Initializing DMA pool allocator
> [drm] radeon: 1024M of VRAM memory ready
> [drm] radeon: 1024M of GTT memory ready.
> [drm] GART: num cpu pages 262144, num gpu pages 262144
> [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
> usb 2-1: new high-speed USB device number 2 using ehci-pci
> [drm] Loading CEDAR Microcode
> [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
> radeon 0000:01:00.0: WB enabled
> radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880221b17c00
> radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880221b17c0c
> radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc90010e9c418
> [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [drm] Driver supports precise vblank timestamp query.
> radeon 0000:01:00.0: irq 42 for MSI/MSI-X
> radeon 0000:01:00.0: radeon: using MSI.
> [drm] radeon: irq initialized.
> [drm] ring test on 0 succeeded in 1 usecs
> [drm] ring test on 3 succeeded in 1 usecs
> usb 2-1: New USB device found, idVendor=0bc2, idProduct=3320
> usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
> usb 2-1: Product: Expansion Desk
> usb 2-1: Manufacturer: Seagate
> usb 2-1: SerialNumber: NA4J8M6Q
> usb-storage 2-1:1.0: USB Mass Storage device detected
> scsi7 : usb-storage 2-1:1.0
> random: nonblocking pool is initialized
> [drm] ring test on 5 succeeded in 1 usecs
> [drm] UVD initialized successfully.
> [drm] Enabling audio 0 support
> [drm] ib test on ring 0 succeeded in 0 usecs
> [drm] ib test on ring 3 succeeded in 0 usecs
> usb 2-3: new high-speed USB device number 4 using ehci-pci
> usb 2-3: New USB device found, idVendor=1a40, idProduct=0101
> usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> usb 2-3: Product: USB 2.0 Hub
> hub 2-3:1.0: USB hub found
> hub 2-3:1.0: 4 ports detected
> tsc: Refined TSC clocksource calibration: 2800.099 MHz
> [drm] ib test on ring 5 succeeded
> [drm] Radeon Display Connectors
> [drm] Connector 0:
> [drm]   HDMI-A-1
> [drm]   HPD2
> [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
> [drm]   Encoders:
> [drm]     DFP1: INTERNAL_UNIPHY1
> [drm] Connector 1:
> [drm]   DVI-D-1
> [drm]   HPD4
> [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
> [drm]   Encoders:
> [drm]     DFP2: INTERNAL_UNIPHY
> [drm] Connector 2:
> [drm]   VGA-1
> [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
> [drm]   Encoders:
> [drm]     CRT1: INTERNAL_KLDSCP_DAC1
> [drm] Internal thermal controller with fan control
> [drm] radeon: dpm initialized
> [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "VGA-1"
> [drm] fb mappable at 0xD0460000
> [drm] vram apper at 0xD0000000
> [drm] size 9216000
> [drm] fb depth is 24
> [drm]    pitch is 7680
> fbcon: radeondrmfb (fb0) is primary device
> Console: switching to colour frame buffer device 240x67
> radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
> radeon 0000:01:00.0: registered panic notifier
> [drm] Initialized radeon 2.35.0 20080528 for 0000:01:00.0 on minor 0
> [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 153
> Raw EDID:
>  	00 ff ff ff ff ff ff 00 05 e3 52 22 db 06 00 00
>  	1b 17 01 03 68 30 1b 78 2a ee d1 a5 55 48 37 ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> bio: create slab <bio-1> at 1
> [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 5
> Raw EDID:
>  	00 ff ff ff ff ff ff 00 05 e3 52 45 ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 183
> Raw EDID:
>  	00 ff ff ff ff ff ff 00 05 e3 52 22 db 06 00 00
>  	1b 17 01 03 68 30 1b ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 200
> Raw EDID:
>  	00 ff ff ff ff ff ff 00 05 e3 52 22 db 06 00 01
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  	ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> radeon 0000:01:00.0: VGA-1: EDID block 0 invalid.
> [drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID
> [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "VGA-1"
> usb 4-1: new low-speed USB device number 2 using ohci-pci
> scsi 4:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
> scsi 4:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
> scsi 4:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
> scsi 4:0:0:3: Direct-Access     Generic- MS/MS-Pro/HG     1.00 PQ: 0 ANSI: 0 CCS
> sd 4:0:0:0: Attached scsi generic sg3 type 0
> sd 4:0:0:1: Attached scsi generic sg4 type 0
> sd 4:0:0:2: Attached scsi generic sg5 type 0
> sd 4:0:0:3: Attached scsi generic sg6 type 0
> usb 4-1: New USB device found, idVendor=413c, idProduct=2107
> usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 4-1: Product: Dell USB Entry Keyboard
> usb 4-1: Manufacturer: Dell
> input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input5
> hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:12.1-1/input0
> EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
> sd 4:0:0:0: [sdc] Attached SCSI removable disk
> sd 4:0:0:1: [sdd] Attached SCSI removable disk
> sd 4:0:0:2: [sde] Attached SCSI removable disk
> sd 4:0:0:3: [sdf] Attached SCSI removable disk
> scsi 7:0:0:0: Direct-Access     Seagate  Expansion Desk   070B PQ: 0 ANSI: 6
> sd 7:0:0:0: Attached scsi generic sg7 type 0
> sd 7:0:0:0: [sdg] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
> sd 7:0:0:0: [sdg] Write Protect is off
> sd 7:0:0:0: [sdg] Mode Sense: 43 00 00 00
> sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sd 7:0:0:0: [sdg] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
>  sdg: sdg1
> sd 7:0:0:0: [sdg] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
> sd 7:0:0:0: [sdg] Attached SCSI disk
> systemd-journald[70]: Received SIGTERM
> usb 5-2: new low-speed USB device number 2 using ohci-pci
> Switched to clocksource tsc
> usb 5-2: New USB device found, idVendor=0461, idProduct=4d22
> usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
> usb 5-2: Product: USB Optical Mouse
> input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input6
> hid-generic 0003:0461:4D22.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:13.0-2/input0
> usb 6-1: new full-speed USB device number 2 using ohci-pci
> usb 6-1: New USB device found, idVendor=05e3, idProduct=0606
> usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 6-1: Product: USB Hub 2.0
> usb 6-1: Manufacturer: ALCOR
> hub 6-1:1.0: USB hub found
> hub 6-1:1.0: 4 ports detected
> type=1404 audit(1386947797.294:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
> usb 2-3.1: new high-speed USB device number 6 using ehci-pci
> usb 2-3.1: New USB device found, idVendor=0930, idProduct=6533
> usb 2-3.1: New USB device strings: Mfr=0, Product=2, SerialNumber=3
> usb 2-3.1: Product: USB Flash Memory
> usb 2-3.1: SerialNumber: 0CD0576091D08944
> usb-storage 2-3.1:1.0: USB Mass Storage device detected
> scsi8 : usb-storage 2-3.1:1.0
> usb 2-3.2: new low-speed USB device number 7 using ehci-pci
> usb 2-3.2: New USB device found, idVendor=1bcf, idProduct=0007
> usb 2-3.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
> usb 2-3.2: Product: USB Optical Mouse
> input: USB Optical Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3.2/2-3.2:1.0/input/input7
> hid-generic 0003:1BCF:0007.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:13.2-3.2/input0
> usb 2-3.3: new high-speed USB device number 8 using ehci-pci
> usb 2-3.3: New USB device found, idVendor=0930, idProduct=6533
> usb 2-3.3: New USB device strings: Mfr=0, Product=2, SerialNumber=3
> usb 2-3.3: Product: USB Flash Memory
> usb 2-3.3: SerialNumber: 0BF0C760A2708A09
> usb-storage 2-3.3:1.0: USB Mass Storage device detected
> scsi9 : usb-storage 2-3.3:1.0
> usb 2-3.4: new full-speed USB device number 9 using ehci-pci
> usb 2-3.4: New USB device found, idVendor=0a5c, idProduct=4500
> usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 2-3.4: Product: BCM2046B1
> usb 2-3.4: Manufacturer: Broadcom
> hub 2-3.4:1.0: USB hub found
> hub 2-3.4:1.0: 3 ports detected
> SELinux: 2048 avtab hash slots, 95734 rules.
> SELinux: 2048 avtab hash slots, 95734 rules.
> usb 6-1.1: new full-speed USB device number 3 using ohci-pci
> usb 6-1.1: not running at top speed; connect to a high speed hub
> usb 6-1.1: New USB device found, idVendor=05dc, idProduct=a560
> usb 6-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 6-1.1: Product: JD FIREFLY
> usb 6-1.1: Manufacturer: LEXAR MEDIA
> usb 6-1.1: SerialNumber: 67CC0807063310071006
> usb-storage 6-1.1:1.0: USB Mass Storage device detected
> scsi10 : usb-storage 6-1.1:1.0
> usb 6-1.2: new full-speed USB device number 4 using ohci-pci
> usb 6-1.2: not running at top speed; connect to a high speed hub
> usb 6-1.2: New USB device found, idVendor=0781, idProduct=5150
> usb 6-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 6-1.2: Product: Cruzer Mini
> usb 6-1.2: Manufacturer: SanDisk Corporation
> usb 6-1.2: SerialNumber: SNDK220EC41C22F00704
> usb-storage 6-1.2:1.0: USB Mass Storage device detected
> scsi11 : usb-storage 6-1.2:1.0
> usb 6-1.3: new full-speed USB device number 5 using ohci-pci
> usb 6-1.3: not running at top speed; connect to a high speed hub
> scsi 8:0:0:0: Direct-Access              USB Flash Memory 1.04 PQ: 0 ANSI: 0 CCS
> sd 8:0:0:0: Attached scsi generic sg8 type 0
> sd 8:0:0:0: [sdh] 1001472 512-byte logical blocks: (512 MB/489 MiB)
> sd 8:0:0:0: [sdh] Write Protect is off
> sd 8:0:0:0: [sdh] Mode Sense: 23 00 00 00
> sd 8:0:0:0: [sdh] No Caching mode page found
> sd 8:0:0:0: [sdh] Assuming drive cache: write through
> sd 8:0:0:0: [sdh] No Caching mode page found
> sd 8:0:0:0: [sdh] Assuming drive cache: write through
>  sdh: sdh1
> sd 8:0:0:0: [sdh] No Caching mode page found
> sd 8:0:0:0: [sdh] Assuming drive cache: write through
> sd 8:0:0:0: [sdh] Attached SCSI removable disk
> usb 6-1.3: New USB device found, idVendor=0930, idProduct=6533
> usb 6-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=3
> usb 6-1.3: Product: USB Flash Memory
> usb 6-1.3: SerialNumber: 0E406760517338CB
> usb-storage 6-1.3:1.0: USB Mass Storage device detected
> scsi12 : usb-storage 6-1.3:1.0
> usb 6-1.4: new full-speed USB device number 6 using ohci-pci
> SELinux:  8 users, 82 roles, 4557 types, 259 bools, 1 sens, 1024 cats
> SELinux:  83 classes, 95734 rules
> SELinux:  Completing initialization.
> SELinux:  Setting up existing superblocks.
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
> SELinux: initialized (dev aio, type aio), not configured for labeling
> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
> SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
> SELinux: initialized (dev dm-0, type ext4), uses xattr
> type=1403 audit(1386947798.515:3): policy loaded auid=4294967295 ses=4294967295
> systemd[1]: Successfully loaded SELinux policy in 1.282767s.
> usb 6-1.4: not running at top speed; connect to a high speed hub
> usb 6-1.4: New USB device found, idVendor=0781, idProduct=5151
> usb 6-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 6-1.4: Product: Cruzer Micro
> usb 6-1.4: Manufacturer: SanDisk Corporation
> usb 6-1.4: SerialNumber: 20051739520565A31910
> usb-storage 6-1.4:1.0: USB Mass Storage device detected
> scsi13 : usb-storage 6-1.4:1.0
> usb 2-3.4.1: new full-speed USB device number 10 using ehci-pci
> systemd[1]: RTC configured in localtime, applying delta of -420 minutes to system time.
> usb 2-3.4.1: New USB device found, idVendor=0a5c, idProduct=4502
> usb 2-3.4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3.4/2-3.4.1/2-3.4.1:1.0/input/input8
> hid-generic 0003:0A5C:4502.0004: input,hidraw3: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:13.2-3.4.1/input0
> scsi 9:0:0:0: Direct-Access              USB Flash Memory 1.04 PQ: 0 ANSI: 0 CCS
> sd 9:0:0:0: Attached scsi generic sg9 type 0
> sd 9:0:0:0: [sdi] 1001472 512-byte logical blocks: (512 MB/489 MiB)
> sd 9:0:0:0: [sdi] Write Protect is off
> sd 9:0:0:0: [sdi] Mode Sense: 23 00 00 00
> sd 9:0:0:0: [sdi] No Caching mode page found
> sd 9:0:0:0: [sdi] Assuming drive cache: write through
> sd 9:0:0:0: [sdi] No Caching mode page found
> sd 9:0:0:0: [sdi] Assuming drive cache: write through
>  sdi: sdi1
> sd 9:0:0:0: [sdi] No Caching mode page found
> sd 9:0:0:0: [sdi] Assuming drive cache: write through
> sd 9:0:0:0: [sdi] Attached SCSI removable disk
> systemd[1]: Relabelled /dev and /run in 55.085ms.
> usb 2-3.4.2: new full-speed USB device number 11 using ehci-pci
> usb 2-3.4.2: New USB device found, idVendor=0a5c, idProduct=4503
> usb 2-3.4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:13.2/usb2/2-3/2-3.4/2-3.4.2/2-3.4.2:1.0/input/input9
> hid-generic 0003:0A5C:4503.0005: input,hidraw4: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:13.2-3.4.2/input0
> usb 2-3.4.3: new full-speed USB device number 12 using ehci-pci
> usb 2-3.4.3: New USB device found, idVendor=0a5c, idProduct=2148
> usb 2-3.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 2-3.4.3: Product: BCM92046DG-CL1ROM
> usb 2-3.4.3: Manufacturer: Broadcom Corp
> usb 2-3.4.3: SerialNumber: 000272216178
> scsi 10:0:0:0: Direct-Access     LEXAR    JD FIREFLY       3000 PQ: 0 ANSI: 0 CCS
> sd 10:0:0:0: Attached scsi generic sg10 type 0
> sd 10:0:0:0: [sdj] 1981440 512-byte logical blocks: (1.01 GB/967 MiB)
> sd 10:0:0:0: [sdj] Write Protect is off
> sd 10:0:0:0: [sdj] Mode Sense: 43 00 00 00
> sd 10:0:0:0: [sdj] No Caching mode page found
> sd 10:0:0:0: [sdj] Assuming drive cache: write through
> sd 10:0:0:0: [sdj] No Caching mode page found
> sd 10:0:0:0: [sdj] Assuming drive cache: write through
>  sdj: sdj1
> sd 10:0:0:0: [sdj] No Caching mode page found
> sd 10:0:0:0: [sdj] Assuming drive cache: write through
> sd 10:0:0:0: [sdj] Attached SCSI removable disk
> scsi 11:0:0:0: Direct-Access     SanDisk  Cruzer Mini      0.1  PQ: 0 ANSI: 2
> sd 11:0:0:0: Attached scsi generic sg11 type 0
> sd 11:0:0:0: [sdk] 250879 512-byte logical blocks: (128 MB/122 MiB)
> sd 11:0:0:0: [sdk] Write Protect is off
> sd 11:0:0:0: [sdk] Mode Sense: 03 00 00 00
> sd 11:0:0:0: [sdk] No Caching mode page found
> sd 11:0:0:0: [sdk] Assuming drive cache: write through
> sd 11:0:0:0: [sdk] No Caching mode page found
> sd 11:0:0:0: [sdk] Assuming drive cache: write through
>  sdk: sdk1
> sd 11:0:0:0: [sdk] No Caching mode page found
> sd 11:0:0:0: [sdk] Assuming drive cache: write through
> sd 11:0:0:0: [sdk] Attached SCSI removable disk
> scsi 12:0:0:0: Direct-Access              USB Flash Memory 1.04 PQ: 0 ANSI: 0 CCS
> sd 12:0:0:0: Attached scsi generic sg12 type 0
> sd 12:0:0:0: [sdl] 1001472 512-byte logical blocks: (512 MB/489 MiB)
> sd 12:0:0:0: [sdl] Write Protect is off
> sd 12:0:0:0: [sdl] Mode Sense: 23 00 00 00
> sd 12:0:0:0: [sdl] No Caching mode page found
> sd 12:0:0:0: [sdl] Assuming drive cache: write through
> sd 12:0:0:0: [sdl] No Caching mode page found
> sd 12:0:0:0: [sdl] Assuming drive cache: write through
>  sdl: sdl1
> sd 12:0:0:0: [sdl] No Caching mode page found
> sd 12:0:0:0: [sdl] Assuming drive cache: write through
> sd 12:0:0:0: [sdl] Attached SCSI removable disk
> scsi 13:0:0:0: Direct-Access     SanDisk  Cruzer Micro     0.4  PQ: 0 ANSI: 2
> sd 13:0:0:0: Attached scsi generic sg13 type 0
> sd 13:0:0:0: [sdm] 1000944 512-byte logical blocks: (512 MB/488 MiB)
> sd 13:0:0:0: [sdm] Write Protect is off
> sd 13:0:0:0: [sdm] Mode Sense: 03 00 00 00
> sd 13:0:0:0: [sdm] No Caching mode page found
> sd 13:0:0:0: [sdm] Assuming drive cache: write through
> LVM: Logical Volume autoactivation enabled.
> LVM: Activation generator successfully completed.
> sd 13:0:0:0: [sdm] No Caching mode page found
> sd 13:0:0:0: [sdm] Assuming drive cache: write through
>  sdm: sdm1
> sd 13:0:0:0: [sdm] No Caching mode page found
> sd 13:0:0:0: [sdm] Assuming drive cache: write through
> sd 13:0:0:0: [sdm] Attached SCSI removable disk
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
> systemd-journald[355]: Vacuuming done, freed 0 bytes
> systemd-udevd[367]: starting version 204
> EXT4-fs (dm-0): re-mounted. Opts: (null)
> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
> acpi-cpufreq: overriding BIOS provided _PSD data
> RPC: Registered named UNIX socket transport module.
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> RPC: Registered tcp NFSv4.1 backchannel transport module.
> SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
> type=1400 audit(1386947806.950:4): avc:  denied  { mmap_zero } for  pid=417 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect
> media: Linux media interface: v0.10
> tulip: Linux Tulip driver version 1.1.15 (Feb 27, 2007)
> tulip0:  MII transceiver #1 config 3100 status 7809 advertising 01e1
> net eth0: Lite-On 82c168 PNIC rev 32 at MMIO 0xfebffc00, 00:c0:f0:5a:d8:91, IRQ 20
> piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
> piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
> Linux video capture interface: v2.00
> microcode: CPU0: patch_level=0x01000086
> sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
> sp5100_tco: PCI Revision ID: 0x3a
> sp5100_tco: failed to find MMIO address, giving up.
> microcode: CPU0: new patch_level=0x010000db
> microcode: CPU1: patch_level=0x01000086
> microcode: CPU1: new patch_level=0x010000db
> microcode: CPU2: patch_level=0x01000086
> microcode: CPU2: new patch_level=0x010000db
> microcode: CPU3: patch_level=0x01000086
> microcode: CPU3: new patch_level=0x010000db
> microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
> r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
> r8169 0000:02:00.0: irq 43 for MSI/MSI-X
> r8169 0000:02:00.0 eth1: RTL8102e at 0xffffc90000c7c000, 00:24:e8:2a:22:19, XID 04a00000 IRQ 43
> uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (0ac8:3420)
> input: Venus USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input10
> usbcore: registered new interface driver uvcvideo
> USB Video Class driver (1.1.1)
> Bluetooth: Core ver 2.17
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: SCO socket layer initialized
> usbcore: registered new interface driver btusb
> dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
> Adding 10289148k swap on /dev/mapper/vg_groucho-lv_swap.  Priority:-1 extents:1 across:10289148k FS
> EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
> SELinux: initialized (dev sda5, type ext4), uses xattr
> Bluetooth: hci0 command 0x0c14 tx timeout
> ALSA hda_intel.c:3377 0000:00:14.2: Using LPIB position fix
> ALSA hda_intel.c:1799 0000:00:14.2: Enable sync_write for stable communication
> kvm: Nested Virtualization enabled
> kvm: Nested Paging enabled
> ALSA hda_auto_parser.c:393 autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
> ALSA hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> ALSA hda_auto_parser.c:401    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
> ALSA hda_auto_parser.c:402    mono: mono_out=0x0
> ALSA hda_auto_parser.c:405    dig-out=0x20/0x0
> ALSA hda_auto_parser.c:406    inputs:
> ALSA hda_auto_parser.c:410      Rear Mic=0x1a
> ALSA hda_auto_parser.c:410      Front Mic=0x1e
> ALSA hda_auto_parser.c:410      Line=0x1b
> input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
> input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
> input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
> input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
> input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
> ALSA hda_intel.c:3173 0000:01:00.1: Handle VGA-switcheroo audio client
> ALSA hda_intel.c:3377 0000:01:00.1: Using LPIB position fix
> snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
> ALSA hda_intel.c:1799 0000:01:00.1: Enable sync_write for stable communication
> ALSA hda_eld.c:684 HDMI ATI/AMD: no speaker allocation for ELD
> input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
> EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
> SELinux: initialized (dev dm-2, type ext4), uses xattr
> systemd-journald[355]: Received request to flush runtime journal from PID 1
> usbcore: registered new interface driver snd-usb-audio
> ip6_tables: (C) 2000-2006 Netfilter Core Team
> it87: Found IT8718F chip at 0xe80, revision 3
> Bluetooth: hci0 command 0x0c25 tx timeout
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> Bluetooth: BNEP filters: protocol multicast
> Bluetooth: BNEP socket layer initialized
> Bluetooth: RFCOMM TTY layer initialized
> Bluetooth: RFCOMM socket layer initialized
> Bluetooth: RFCOMM ver 1.11
> r8169 0000:02:00.0 eth1: link down
> r8169 0000:02:00.0 eth1: link down
> IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
> [drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID
> [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "VGA-1"
> [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "VGA-1"
> NFSD: starting 90-second grace period (net ffffffff81cbeb40)
> r8169 0000:02:00.0 eth1: link up
> IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
> type=1400 audit(1386947828.455:5): avc:  denied  { execmem } for  pid=848 comm="java" scontext=system_u:system_r:httpd_t:s0 tcontext=system_u:system_r:httpd_t:s0 tclass=process
> Bridge firewalling registered
> tun: Universal TUN/TAP device driver, 1.6
> tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> device virbr0-nic entered promiscuous mode
> virbr0: port 1(virbr0-nic) entered listening state
> virbr0: port 1(virbr0-nic) entered listening state
> IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
> virbr0: port 1(virbr0-nic) entered disabled state
> systemd-readahead[319]: Failed to read event: Value too large for defined data type
> Ebtables v2.0 registered
> [drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID
> [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "VGA-1"
> [drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID
> [drm:radeon_vga_detect] *ERROR* VGA-1: probed a monitor but no|invalid EDID
> [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "VGA-1"
> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> type=1006 audit(1386947872.426:6): pid=1436 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=1 res=1
> fuse init (API version 7.22)
> SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
> SELinux: initialized (dev fuse, type fuse), uses genfs_contexts

Actions: View

Attachments on bug 72648: 90726 | 90727 | 90730 | 90733

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.