Attachment 90784 Details for Bug 72716 – dmsg

dmsg

dmsg (text/plain), 80.73 KB, created by txtoxtox285 on 2013-12-14 19:53:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: txtoxtox285

Created: 2013-12-14 19:53:14 UTC

Size: 80.73 KB

patch

obsolete

>[    0.000000] Initializing cgroup subsys cpuset
>[    0.000000] Initializing cgroup subsys cpu
>[    0.000000] Initializing cgroup subsys cpuacct
>[    0.000000] Linux version 3.12.4 (tobias@phoenix) (gcc version 4.6.3 (Gentoo 4.6.3 p1.9, pie-0.5.2) ) #1 SMP PREEMPT Mon Dec 9 20:39:19 CET 2013
>[    0.000000] Command line: BOOT_IMAGE=/3.12.4/bzImage reboot=cold rw root=/dev/ram _real_root=/dev/mapper/vg.ssd-root _drivetype=scsi "_chipset=ahci dm-crypt aesni-intel deflate lzf lzo" _rootfs=ext4 acpi=strict apic=debug _resume2=swap:/dev/mapper/vg.wd30ezrx.plain-swap1 _dmcrypt_source=/dev/mapper/vg.wd30ezrx.crypt-vol0 _dmcrypt_target=pv.wd30ezrx.plain _dmcrypt_key=gpg::/key no_console_suspend=1 toi_initramfs_resume_only=1 memory_corruption_check=1 devtmpfs.mount=0 radeon!audio=1 _must_hibernate=1 enable_mtrr_cleanup Xmtrr_gransize=16M Xmtrr_chunk_size=1G Xmtrr_spare_regs=2 _fb=radeon Xradeon!hw_i2c=1
>[    0.000000] KERNEL supported cpus:
>[    0.000000]   Intel GenuineIntel
>[    0.000000] e820: BIOS-provided physical RAM map:
>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
>[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000caf7ffff] usable
>[    0.000000] BIOS-e820: [mem 0x00000000caf80000-0x00000000cafa2fff] ACPI NVS
>[    0.000000] BIOS-e820: [mem 0x00000000cafa3000-0x00000000cafdffff] ACPI data
>[    0.000000] BIOS-e820: [mem 0x00000000cafe0000-0x00000000caffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
>[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
>[    0.000000] NX (Execute Disable) protection: active
>[    0.000000] SMBIOS 2.4 present.
>[    0.000000] DMI: Gigabyte Technology Co., Ltd. Z68X-UD3H-B3/Z68X-UD3H-B3, BIOS F12 03/20/2012
>[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>[    0.000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
>[    0.000000] MTRR default type: uncachable
>[    0.000000] MTRR fixed ranges enabled:
>[    0.000000]   00000-9FFFF write-back
>[    0.000000]   A0000-BFFFF uncachable
>[    0.000000]   C0000-D2FFF write-protect
>[    0.000000]   D3000-EFFFF uncachable
>[    0.000000]   F0000-FFFFF write-through
>[    0.000000] MTRR variable ranges enabled:
>[    0.000000]   0 base 000000000 mask F00000000 write-back
>[    0.000000]   1 base 0E0000000 mask FE0000000 uncachable
>[    0.000000]   2 base 0D0000000 mask FF0000000 uncachable
>[    0.000000]   3 base 0CC000000 mask FFC000000 uncachable
>[    0.000000]   4 base 0CB800000 mask FFF800000 uncachable
>[    0.000000]   5 base 100000000 mask F00000000 write-back
>[    0.000000]   6 base 200000000 mask FC0000000 write-back
>[    0.000000]   7 base 230000000 mask FF0000000 uncachable
>[    0.000000]   8 disabled
>[    0.000000]   9 disabled
>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>[    0.000000] original variable MTRRs
>[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
>[    0.000000] reg 1, base: 3584MB, range: 512MB, type UC
>[    0.000000] reg 2, base: 3328MB, range: 256MB, type UC
>[    0.000000] reg 3, base: 3264MB, range: 64MB, type UC
>[    0.000000] reg 4, base: 3256MB, range: 8MB, type UC
>[    0.000000] reg 5, base: 4GB, range: 4GB, type WB
>[    0.000000] reg 6, base: 8GB, range: 1GB, type WB
>[    0.000000] reg 7, base: 8960MB, range: 256MB, type UC
>[    0.000000] total RAM covered: 8120M
>[    0.000000] Found optimal setting for mtrr clean up
>[    0.000000]  gran_size: 64K 	chunk_size: 16M 	num_reg: 8  	lose cover RAM: 0G
>[    0.000000] New variable MTRRs
>[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
>[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
>[    0.000000] reg 2, base: 3GB, range: 128MB, type WB
>[    0.000000] reg 3, base: 3200MB, range: 64MB, type WB
>[    0.000000] reg 4, base: 3256MB, range: 8MB, type UC
>[    0.000000] reg 5, base: 4GB, range: 4GB, type WB
>[    0.000000] reg 6, base: 8GB, range: 512MB, type WB
>[    0.000000] reg 7, base: 8704MB, range: 256MB, type WB
>[    0.000000] e820: update [mem 0xcb800000-0xffffffff] usable ==> reserved
>[    0.000000] e820: last_pfn = 0xcaf80 max_arch_pfn = 0x400000000
>[    0.000000] Scanning 1 areas for low memory corruption
>[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
>[    0.000000] reserving inaccessible SNB gfx pages
>[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
>[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
>[    0.000000] BRK [0x01850000, 0x01850fff] PGTABLE
>[    0.000000] BRK [0x01851000, 0x01851fff] PGTABLE
>[    0.000000] BRK [0x01852000, 0x01852fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x22fc00000-0x22fdfffff]
>[    0.000000]  [mem 0x22fc00000-0x22fdfffff] page 2M
>[    0.000000] BRK [0x01853000, 0x01853fff] PGTABLE
>[    0.000000] init_memory_mapping: [mem 0x22c000000-0x22fbfffff]
>[    0.000000]  [mem 0x22c000000-0x22fbfffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
>[    0.000000]  [mem 0x200000000-0x22bffffff] page 2M
>[    0.000000] init_memory_mapping: [mem 0x00100000-0xcaf7ffff]
>[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
>[    0.000000]  [mem 0x00200000-0xcadfffff] page 2M
>[    0.000000]  [mem 0xcae00000-0xcaf7ffff] page 4k
>[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
>[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
>[    0.000000] BRK [0x01854000, 0x01854fff] PGTABLE
>[    0.000000] BRK [0x01855000, 0x01855fff] PGTABLE
>[    0.000000] RAMDISK: [mem 0x36606000-0x372fafff]
>[    0.000000] ACPI: RSDP 00000000000f7920 00014 (v00 GBT   )
>[    0.000000] ACPI: RSDT 00000000cafa3040 00054 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>[    0.000000] ACPI: FACP 00000000cafa3100 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>[    0.000000] ACPI: DSDT 00000000cafa31c0 04D4C (v01 GBT    GBTUACPI 00001000 MSFT 04000000)
>[    0.000000] ACPI: FACS 00000000caf80000 00040
>[    0.000000] ACPI: MSDM 00000000cafa8080 00055 (v03 GBT    GBTUACPI 42302E31 GBTU 01010101)
>[    0.000000] ACPI: HPET 00000000cafa8140 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
>[    0.000000] ACPI: MCFG 00000000cafa81c0 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>[    0.000000] ACPI: ASPT 00000000cafa8300 00034 (v07 GBT    PerfTune 312E3042 UTBG 01010101)
>[    0.000000] ACPI: SSPT 00000000cafa8340 02380 (v01 GBT    SsptHead 312E3042 UTBG 01010101)
>[    0.000000] ACPI: EUDS 00000000cafaa6c0 000C0 (v01 GBT             00000000      00000000)
>[    0.000000] ACPI: MATS 00000000cafaa780 00034 (v01 GBT             00000000      00000000)
>[    0.000000] ACPI: TAMG 00000000cafaa7e0 00CFA (v01 GBT    GBT   B0 5455312E BG?? 53450101)
>[    0.000000] ACPI: APIC 00000000cafa7f80 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
>[    0.000000] ACPI: SSDT 00000000cafab500 01EC8 (v01  INTEL PPM RCM  80000001 INTL 20061109)
>[    0.000000] ACPI: MATS 00000000cafad400 0AAD4 (v01        MATS RCM 80000001 INTL 20061109)
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] mapped APIC to ffffffffff5fb000 (        fee00000)
>[    0.000000]  [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227400000-ffff88022f3fffff] on node 0
>[    0.000000] Zone ranges:
>[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
>[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
>[    0.000000]   Normal   [mem 0x100000000-0x22fdfffff]
>[    0.000000] Movable zone start for each node
>[    0.000000] Early memory node ranges
>[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
>[    0.000000]   node   0: [mem 0x00100000-0xcaf7ffff]
>[    0.000000]   node   0: [mem 0x100000000-0x22fdfffff]
>[    0.000000] On node 0 totalpages: 2075932
>[    0.000000]   DMA zone: 64 pages used for memmap
>[    0.000000]   DMA zone: 156 pages reserved
>[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
>[    0.000000]   DMA32 zone: 12926 pages used for memmap
>[    0.000000]   DMA32 zone: 827264 pages, LIFO batch:31
>[    0.000000]   Normal zone: 19448 pages used for memmap
>[    0.000000]   Normal zone: 1244672 pages, LIFO batch:31
>[    0.000000] ACPI: PM-Timer IO Port: 0x408
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] mapped APIC to ffffffffff5fb000 (        fee00000)
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
>[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09
>[    0.000000] ACPI: IRQ0 used by override.
>[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01
>[    0.000000] ACPI: IRQ2 used by override.
>[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03
>[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04
>[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05
>[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06
>[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07
>[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a
>[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b
>[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c
>[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d
>[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e
>[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>[    0.000000] smpboot: 8 Processors exceeds NR_CPUS limit of 4
>[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>[    0.000000] mapped IOAPIC to ffffffffff5fa000 (fec00000)
>[    0.000000] nr_irqs_gsi: 40
>[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
>[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xcaf80000-0xcafa2fff]
>[    0.000000] PM: Registered nosave memory: [mem 0xcafa3000-0xcafdffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xcafe0000-0xcaffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xf3ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
>[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
>[    0.000000] e820: [mem 0xcb000000-0xf3ffffff] available for PCI devices
>[    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
>[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022fa00000 s79360 r8192 d23040 u524288
>[    0.000000] pcpu-alloc: s79360 r8192 d23040 u524288 alloc=1*2097152
>[    0.000000] pcpu-alloc: [0] 0 1 2 3 
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2043338
>[    0.000000] Kernel command line: BOOT_IMAGE=/3.12.4/bzImage reboot=cold rw root=/dev/ram _real_root=/dev/mapper/vg.ssd-root _drivetype=scsi "_chipset=ahci dm-crypt aesni-intel deflate lzf lzo" _rootfs=ext4 acpi=strict apic=debug _resume2=swap:/dev/mapper/vg.wd30ezrx.plain-swap1 _dmcrypt_source=/dev/mapper/vg.wd30ezrx.crypt-vol0 _dmcrypt_target=pv.wd30ezrx.plain _dmcrypt_key=gpg::/key no_console_suspend=1 toi_initramfs_resume_only=1 memory_corruption_check=1 devtmpfs.mount=0 radeon!audio=1 _must_hibernate=1 enable_mtrr_cleanup Xmtrr_gransize=16M Xmtrr_chunk_size=1G Xmtrr_spare_regs=2 _fb=radeon Xradeon!hw_i2c=1
>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>[    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
>[    0.000000] Memory: 8071256K/8303728K available (3075K kernel code, 582K rwdata, 1704K rodata, 880K init, 880K bss, 232472K reserved)
>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>[    0.000000] Preemptible hierarchical RCU implementation.
>[    0.000000] NR_IRQS:4352 nr_irqs:712 16
>[    0.000000] Console: colour VGA+ 80x25
>[    0.000000] console [tty0] enabled
>[    0.000000] hpet clockevent registered
>[    0.000000] tsc: Fast TSC calibration using PIT
>[    0.001000] tsc: Detected 2494.340 MHz processor
>[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.68 BogoMIPS (lpj=2494340)
>[    0.000125] pid_max: default: 32768 minimum: 301
>[    0.000206] Security Framework initialized
>[    0.000273] Mount-cache hash table entries: 256
>[    0.000506] Initializing cgroup subsys blkio
>[    0.000568] Initializing cgroup subsys perf_event
>[    0.000647] CPU: Physical Processor ID: 0
>[    0.000706] CPU: Processor Core ID: 0
>[    0.000769] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
>ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
>[    0.000842] mce: CPU supports 9 MCE banks
>[    0.000913] CPU0: Thermal monitoring enabled (TM1)
>[    0.000982] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
>Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
>tlb_flushall_shift: 5
>[    0.001141] Freeing SMP alternatives memory: 8K (ffffffff8176f000 - ffffffff81771000)
>[    0.001211] ACPI: Core revision 20130725
>[    0.003391] ACPI: All ACPI Tables successfully acquired
>[    0.008848] ftrace: allocating 15616 entries in 62 pages
>[    0.015801] Getting VERSION: 1060015
>[    0.018216] Getting VERSION: 1060015
>[    0.018276] Getting ID: 0
>[    0.018335] Getting ID: 0
>[    0.018395] enabled ExtINT on CPU#0
>[    0.018689] ESR value before enabling vector: 0x00000040  after: 0x00000000
>[    0.018751] ENABLING IO-APIC IRQs
>[    0.018810] init IO_APIC IRQs
>[    0.018811]  apic 2 pin 0 not connected
>[    0.018814] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
>[    0.018819] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
>[    0.018822] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
>[    0.018826] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
>[    0.018830] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:1)
>[    0.018833] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
>[    0.018837] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
>[    0.018840] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
>[    0.018844] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
>[    0.018848] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:1)
>[    0.018851] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:1)
>[    0.018855] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
>[    0.018859] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
>[    0.018862] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
>[    0.018866] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
>[    0.018869]  apic 2 pin 16 not connected
>[    0.018870]  apic 2 pin 17 not connected
>[    0.018871]  apic 2 pin 18 not connected
>[    0.018872]  apic 2 pin 19 not connected
>[    0.018873]  apic 2 pin 20 not connected
>[    0.018874]  apic 2 pin 21 not connected
>[    0.018875]  apic 2 pin 22 not connected
>[    0.018877]  apic 2 pin 23 not connected
>[    0.019011] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>[    0.029085] smpboot: CPU0: Intel(R) Core(TM) i5-2400S CPU @ 2.50GHz (fam: 06, model: 2a, stepping: 07)
>[    0.029311] TSC deadline timer enabled
>[    0.029317] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
>[    0.029648] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
>[    0.029716] ... version:                3
>[    0.029776] ... bit width:              48
>[    0.029836] ... generic registers:      8
>[    0.029895] ... value mask:             0000ffffffffffff
>[    0.029956] ... max period:             0000ffffffffffff
>[    0.030017] ... fixed-purpose events:   3
>[    0.030077] ... event mask:             00000007000000ff
>[    0.050565] masked ExtINT on CPU#1
>[    0.052734] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
>[    0.065826] masked ExtINT on CPU#2
>[    0.039424] smpboot: Booting Node   0, Processors  #   1 #   2 #   3 OK
>[    0.081256] masked ExtINT on CPU#3
>[    0.083387] Brought up 4 CPUs
>[    0.083508] smpboot: Total of 4 processors activated (19954.72 BogoMIPS)
>[    0.086329] devtmpfs: initialized
>[    0.086664] PM: Registering ACPI NVS region [mem 0xcaf80000-0xcafa2fff] (143360 bytes)
>[    0.087664] NET: Registered protocol family 16
>[    0.087945] cpuidle: using governor ladder
>[    0.088005] cpuidle: using governor menu
>[    0.088152] ACPI: bus type PCI registered
>[    0.088317] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
>[    0.088388] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
>[    0.090543] PCI: Using configuration type 1 for base access
>[    0.092164] bio: create slab <bio-0> at 0
>[    0.092314] ACPI: Added _OSI(Module Device)
>[    0.092374] ACPI: Added _OSI(Processor Device)
>[    0.092435] ACPI: Added _OSI(3.0 _SCP Extensions)
>[    0.092495] ACPI: Added _OSI(Processor Aggregator Device)
>[    0.093226] ACPI: EC: Look up EC in DSDT
>[    0.096498] ACPI BIOS Warning (bug): Incorrect checksum in table [TAMG] - 0x42, should be 0x41 (20130725/tbprint-204)
>[    0.097255] ACPI: Interpreter enabled
>[    0.097325] ACPI: (supports S0 S4 S5)
>[    0.097385] ACPI: Using IOAPIC for interrupt routing
>[    0.097489] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>[    0.103081] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
>[    0.103147] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
>[    0.103216] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
>[    0.103385] PCI host bridge to bus 0000:00
>[    0.103447] pci_bus 0000:00: root bus resource [bus 00-3f]
>[    0.103513] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>[    0.103575] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>[    0.103637] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>[    0.103700] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
>[    0.103763] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
>[    0.103825] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfebfffff]
>[    0.103894] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
>[    0.104000] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
>[    0.104030] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>[    0.104119] pci 0000:00:01.1: [8086:0105] type 01 class 0x060400
>[    0.104147] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
>[    0.104239] pci 0000:00:02.0: [8086:0102] type 00 class 0x038000
>[    0.104250] pci 0000:00:02.0: reg 0x10: [mem 0xfb400000-0xfb7fffff 64bit]
>[    0.104256] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
>[    0.104261] pci 0000:00:02.0: reg 0x20: [io  0xff00-0xff3f]
>[    0.104387] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
>[    0.104410] pci 0000:00:16.0: reg 0x10: [mem 0xfbfff000-0xfbfff00f 64bit]
>[    0.104486] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
>[    0.104598] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
>[    0.104619] pci 0000:00:1a.0: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
>[    0.104710] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
>[    0.104763] pci 0000:00:1a.0: System wakeup disabled by ACPI
>[    0.104877] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
>[    0.104893] pci 0000:00:1b.0: reg 0x10: [mem 0xfbff4000-0xfbff7fff 64bit]
>[    0.104961] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>[    0.105012] pci 0000:00:1b.0: System wakeup disabled by ACPI
>[    0.105121] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
>[    0.105194] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>[    0.105246] pci 0000:00:1c.0: System wakeup disabled by ACPI
>[    0.105358] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
>[    0.105437] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>[    0.105490] pci 0000:00:1c.3: System wakeup disabled by ACPI
>[    0.105604] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
>[    0.105683] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
>[    0.105736] pci 0000:00:1c.4: System wakeup disabled by ACPI
>[    0.105847] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
>[    0.105926] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
>[    0.105978] pci 0000:00:1c.6: System wakeup disabled by ACPI
>[    0.106088] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
>[    0.106167] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
>[    0.106219] pci 0000:00:1c.7: System wakeup disabled by ACPI
>[    0.106333] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
>[    0.106354] pci 0000:00:1d.0: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
>[    0.106445] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
>[    0.106495] pci 0000:00:1d.0: System wakeup disabled by ACPI
>[    0.106612] pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
>[    0.106805] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
>[    0.106824] pci 0000:00:1f.2: reg 0x10: [io  0xfe00-0xfe07]
>[    0.106832] pci 0000:00:1f.2: reg 0x14: [io  0xfd00-0xfd03]
>[    0.106840] pci 0000:00:1f.2: reg 0x18: [io  0xfc00-0xfc07]
>[    0.106847] pci 0000:00:1f.2: reg 0x1c: [io  0xfb00-0xfb03]
>[    0.106855] pci 0000:00:1f.2: reg 0x20: [io  0xfa00-0xfa1f]
>[    0.106863] pci 0000:00:1f.2: reg 0x24: [mem 0xfbffc000-0xfbffc7ff]
>[    0.106908] pci 0000:00:1f.2: PME# supported from D3hot
>[    0.106997] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
>[    0.107012] pci 0000:00:1f.3: reg 0x10: [mem 0xfbffb000-0xfbffb0ff 64bit]
>[    0.107033] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
>[    0.107183] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
>[    0.107195] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.107205] pci 0000:01:00.0: reg 0x18: [mem 0xfbac0000-0xfbadffff 64bit]
>[    0.107212] pci 0000:01:00.0: reg 0x20: [io  0xce00-0xceff]
>[    0.107224] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
>[    0.107253] pci 0000:01:00.0: supports D1 D2
>[    0.107306] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
>[    0.107318] pci 0000:01:00.1: reg 0x10: [mem 0xfbafc000-0xfbafffff 64bit]
>[    0.107371] pci 0000:01:00.1: supports D1 D2
>[    0.108582] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.108662] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
>[    0.108665] pci 0000:00:01.0:   bridge window [mem 0xfba00000-0xfbafffff]
>[    0.108668] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.108729] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
>[    0.108743] pci 0000:02:00.0: reg 0x10: [mem 0xfbbf8000-0xfbbfffff 64bit]
>[    0.108810] pci 0000:02:00.0: supports D1 D2
>[    0.108812] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.110589] pci 0000:00:01.1: PCI bridge to [bus 02]
>[    0.110670] pci 0000:00:01.1:   bridge window [mem 0xfbb00000-0xfbbfffff]
>[    0.110745] pci 0000:00:1c.0: PCI bridge to [bus 03]
>[    0.110907] pci 0000:04:00.0: [1283:8892] type 01 class 0x060401
>[    0.111068] pci 0000:04:00.0: supports D1 D2
>[    0.111070] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.111136] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
>[    0.111201] pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
>[    0.111205] pci 0000:00:1c.3:   bridge window [mem 0xfb900000-0xfb9fffff]
>[    0.111211] pci 0000:00:1c.3:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.111213] pci 0000:00:1c.3:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.111215] pci 0000:00:1c.3:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.111217] pci 0000:00:1c.3:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>[    0.111219] pci 0000:00:1c.3:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
>[    0.111221] pci 0000:00:1c.3:   bridge window [mem 0xcfa00000-0xfebfffff] (subtractive decode)
>[    0.111333] pci 0000:05:01.0: [13d0:2103] type 00 class 0x028000
>[    0.111363] pci 0000:05:01.0: reg 0x10: [mem 0xfb9e0000-0xfb9effff]
>[    0.111383] pci 0000:05:01.0: reg 0x14: [io  0xbf00-0xbf1f]
>[    0.111558] pci 0000:05:02.0: [1106:3044] type 00 class 0x0c0010
>[    0.111599] pci 0000:05:02.0: reg 0x10: [mem 0xfb9ff000-0xfb9ff7ff]
>[    0.111620] pci 0000:05:02.0: reg 0x14: [io  0xbe00-0xbe7f]
>[    0.111778] pci 0000:05:02.0: supports D2
>[    0.111780] pci 0000:05:02.0: PME# supported from D2 D3hot D3cold
>[    0.111915] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
>[    0.111988] pci 0000:04:00.0:   bridge window [io  0xb000-0xbfff]
>[    0.111994] pci 0000:04:00.0:   bridge window [mem 0xfb900000-0xfb9fffff]
>[    0.112006] pci 0000:04:00.0:   bridge window [io  0xb000-0xbfff] (subtractive decode)
>[    0.112008] pci 0000:04:00.0:   bridge window [mem 0xfb900000-0xfb9fffff] (subtractive decode)
>[    0.112010] pci 0000:04:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
>[    0.112012] pci 0000:04:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
>[    0.112014] pci 0000:04:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
>[    0.112016] pci 0000:04:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
>[    0.112018] pci 0000:04:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
>[    0.112020] pci 0000:04:00.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
>[    0.112022] pci 0000:04:00.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
>[    0.112024] pci 0000:04:00.0:   bridge window [mem 0xcfa00000-0xfebfffff] (subtractive decode)
>[    0.112131] pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
>[    0.112158] pci 0000:06:00.0: reg 0x10: [mem 0xfbef8000-0xfbefffff 64bit]
>[    0.112285] pci 0000:06:00.0: supports D1 D2
>[    0.112286] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.113605] pci 0000:00:1c.4: PCI bridge to [bus 06]
>[    0.113688] pci 0000:00:1c.4:   bridge window [mem 0xfbe00000-0xfbefffff]
>[    0.113786] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
>[    0.113806] pci 0000:07:00.0: reg 0x10: [io  0xee00-0xeeff]
>[    0.113841] pci 0000:07:00.0: reg 0x18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
>[    0.113863] pci 0000:07:00.0: reg 0x20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
>[    0.113955] pci 0000:07:00.0: supports D1 D2
>[    0.113957] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>[    0.115612] pci 0000:00:1c.6: PCI bridge to [bus 07]
>[    0.115693] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
>[    0.115701] pci 0000:00:1c.6:   bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
>[    0.115794] pci 0000:08:00.0: [1b4b:9172] type 00 class 0x010601
>[    0.115812] pci 0000:08:00.0: reg 0x10: [io  0xdf00-0xdf07]
>[    0.115824] pci 0000:08:00.0: reg 0x14: [io  0xde00-0xde03]
>[    0.115837] pci 0000:08:00.0: reg 0x18: [io  0xdd00-0xdd07]
>[    0.115850] pci 0000:08:00.0: reg 0x1c: [io  0xdc00-0xdc03]
>[    0.115863] pci 0000:08:00.0: reg 0x20: [io  0xdb00-0xdb0f]
>[    0.115875] pci 0000:08:00.0: reg 0x24: [mem 0xfbcff000-0xfbcff1ff]
>[    0.115889] pci 0000:08:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
>[    0.115949] pci 0000:08:00.0: PME# supported from D3hot
>[    0.117616] pci 0000:00:1c.7: PCI bridge to [bus 08]
>[    0.117698] pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
>[    0.117701] pci 0000:00:1c.7:   bridge window [mem 0xfbc00000-0xfbcfffff]
>[    0.117745] pci_bus 0000:00: on NUMA node 0
>[    0.118151] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
>[    0.118951] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>[    0.119748] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>[    0.120541] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>[    0.121323] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>[    0.122207] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>[    0.123106] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>[    0.123903] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>[    0.124745] ACPI: Enabled 1 GPEs in block 00 to 3F
>[    0.124915] ACPI: \_SB_.PCI0: notify handler is installed
>[    0.124944] Found 1 acpi root devices
>[    0.125069] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
>[    0.125139] vgaarb: loaded
>[    0.125198] vgaarb: bridge control possible 0000:01:00.0
>[    0.125341] PCI: Using ACPI for IRQ routing
>[    0.126825] PCI: pci_cache_line_size set to 64 bytes
>[    0.126896] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
>[    0.126897] e820: reserve RAM buffer [mem 0xcaf80000-0xcbffffff]
>[    0.126899] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
>[    0.127117] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
>[    0.127642] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
>[    0.129723] Switched to clocksource hpet
>[    0.133685] pnp: PnP ACPI init
>[    0.133765] ACPI: bus type PNP registered
>[    0.133977] system 00:00: [io  0x04d0-0x04d1] has been reserved
>[    0.134040] system 00:00: [io  0x0290-0x029f] has been reserved
>[    0.134103] system 00:00: [io  0x0800-0x0805] has been reserved
>[    0.134165] system 00:00: [io  0x0290-0x0294] has been reserved
>[    0.134227] system 00:00: [io  0x0880-0x088f] has been reserved
>[    0.134291] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.134302] pnp 00:01: [dma 4]
>[    0.134343] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>[    0.134389] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:15)
>[    0.134436] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
>[    0.134500] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
>[    0.134546] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
>[    0.134555] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:15)
>[    0.134598] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
>[    0.134809] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:15)
>[    0.134881] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
>[    0.134911] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:15)
>[    0.134956] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
>[    0.135039] system 00:08: [io  0x0400-0x04cf] could not be reserved
>[    0.135102] system 00:08: [io  0x04d2-0x04ff] has been reserved
>[    0.135165] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.135226] system 00:09: [io  0x1000-0x107f] has been reserved
>[    0.135288] system 00:09: [io  0x1080-0x10ff] has been reserved
>[    0.135350] system 00:09: [io  0x1100-0x117f] has been reserved
>[    0.135412] system 00:09: [io  0x1180-0x11ff] has been reserved
>[    0.135475] system 00:09: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
>[    0.135683] system 00:0a: [io  0x0454-0x0457] has been reserved
>[    0.135754] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
>[    0.135823] system 00:0b: [mem 0xf4000000-0xf7ffffff] has been reserved
>[    0.135886] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
>[    0.136117] system 00:0c: [mem 0x000d2a00-0x000d3fff] has been reserved
>[    0.136181] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
>[    0.136244] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
>[    0.136306] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
>[    0.136370] system 00:0c: [mem 0xcaf80000-0xcafdffff] could not be reserved
>[    0.136433] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
>[    0.136496] system 00:0c: [mem 0x00100000-0xcaf7ffff] could not be reserved
>[    0.136559] system 00:0c: [mem 0xcafe0000-0xcaffffff] has been reserved
>[    0.136622] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
>[    0.136685] system 00:0c: [mem 0xfed10000-0xfed1dfff] has been reserved
>[    0.136756] system 00:0c: [mem 0xfed20000-0xfed8ffff] could not be reserved
>[    0.136819] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
>[    0.136881] system 00:0c: [mem 0xffb00000-0xffb7ffff] has been reserved
>[    0.136944] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
>[    0.137007] system 00:0c: [mem 0x000e0000-0x000effff] has been reserved
>[    0.137070] system 00:0c: [mem 0x20000000-0x201fffff] could not be reserved
>[    0.137132] system 00:0c: [mem 0x40000000-0x400fffff] could not be reserved
>[    0.137195] system 00:0c: [mem 0xcb000000-0xcf9fffff] could not be reserved
>[    0.137259] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
>[    0.137319] pnp 00:0d: Plug and Play ACPI device, IDs INT0800 (active)
>[    0.137324] pnp: PnP ACPI: found 14 devices
>[    0.137384] ACPI: bus type PNP unregistered
>[    0.145667] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
>[    0.145671] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
>[    0.145673] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
>[    0.145721] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
>[    0.145723] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
>[    0.145725] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
>[    0.145730] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcfa00000-0xcfbfffff]
>[    0.145801] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcfc00000-0xcfdfffff 64bit pref]
>[    0.145871] pci 0000:00:1c.7: BAR 15: assigned [mem 0xcfe00000-0xcfefffff pref]
>[    0.145940] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
>[    0.146004] pci 0000:01:00.0: BAR 6: assigned [mem 0xfba00000-0xfba1ffff pref]
>[    0.146072] pci 0000:00:01.0: PCI bridge to [bus 01]
>[    0.146134] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
>[    0.146197] pci 0000:00:01.0:   bridge window [mem 0xfba00000-0xfbafffff]
>[    0.146260] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.146330] pci 0000:00:01.1: PCI bridge to [bus 02]
>[    0.146392] pci 0000:00:01.1:   bridge window [mem 0xfbb00000-0xfbbfffff]
>[    0.146457] pci 0000:00:1c.0: PCI bridge to [bus 03]
>[    0.146519] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>[    0.146584] pci 0000:00:1c.0:   bridge window [mem 0xcfa00000-0xcfbfffff]
>[    0.146649] pci 0000:00:1c.0:   bridge window [mem 0xcfc00000-0xcfdfffff 64bit pref]
>[    0.146722] pci 0000:04:00.0: PCI bridge to [bus 05]
>[    0.146793] pci 0000:04:00.0:   bridge window [io  0xb000-0xbfff]
>[    0.146862] pci 0000:04:00.0:   bridge window [mem 0xfb900000-0xfb9fffff]
>[    0.146939] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
>[    0.147002] pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
>[    0.147066] pci 0000:00:1c.3:   bridge window [mem 0xfb900000-0xfb9fffff]
>[    0.147135] pci 0000:00:1c.4: PCI bridge to [bus 06]
>[    0.147200] pci 0000:00:1c.4:   bridge window [mem 0xfbe00000-0xfbefffff]
>[    0.147268] pci 0000:00:1c.6: PCI bridge to [bus 07]
>[    0.147330] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
>[    0.147398] pci 0000:00:1c.6:   bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
>[    0.147471] pci 0000:08:00.0: BAR 6: assigned [mem 0xcfe00000-0xcfe0ffff pref]
>[    0.147539] pci 0000:00:1c.7: PCI bridge to [bus 08]
>[    0.147601] pci 0000:00:1c.7:   bridge window [io  0xd000-0xdfff]
>[    0.147666] pci 0000:00:1c.7:   bridge window [mem 0xfbc00000-0xfbcfffff]
>[    0.147731] pci 0000:00:1c.7:   bridge window [mem 0xcfe00000-0xcfefffff pref]
>[    0.150162] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>[    0.150164] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>[    0.150166] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.150168] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
>[    0.150170] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
>[    0.150172] pci_bus 0000:00: resource 9 [mem 0xcfa00000-0xfebfffff]
>[    0.150173] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
>[    0.150175] pci_bus 0000:01: resource 1 [mem 0xfba00000-0xfbafffff]
>[    0.150177] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
>[    0.150179] pci_bus 0000:02: resource 1 [mem 0xfbb00000-0xfbbfffff]
>[    0.150181] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
>[    0.150183] pci_bus 0000:03: resource 1 [mem 0xcfa00000-0xcfbfffff]
>[    0.150185] pci_bus 0000:03: resource 2 [mem 0xcfc00000-0xcfdfffff 64bit pref]
>[    0.150187] pci_bus 0000:04: resource 0 [io  0xb000-0xbfff]
>[    0.150188] pci_bus 0000:04: resource 1 [mem 0xfb900000-0xfb9fffff]
>[    0.150190] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
>[    0.150192] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
>[    0.150194] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
>[    0.150195] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
>[    0.150197] pci_bus 0000:04: resource 8 [mem 0xfed40000-0xfed44fff]
>[    0.150199] pci_bus 0000:04: resource 9 [mem 0xcfa00000-0xfebfffff]
>[    0.150201] pci_bus 0000:05: resource 0 [io  0xb000-0xbfff]
>[    0.150203] pci_bus 0000:05: resource 1 [mem 0xfb900000-0xfb9fffff]
>[    0.150204] pci_bus 0000:05: resource 4 [io  0xb000-0xbfff]
>[    0.150206] pci_bus 0000:05: resource 5 [mem 0xfb900000-0xfb9fffff]
>[    0.150208] pci_bus 0000:05: resource 8 [io  0x0000-0x0cf7]
>[    0.150210] pci_bus 0000:05: resource 9 [io  0x0d00-0xffff]
>[    0.150212] pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff]
>[    0.150213] pci_bus 0000:05: resource 11 [mem 0x000c0000-0x000dffff]
>[    0.150215] pci_bus 0000:05: resource 12 [mem 0xfed40000-0xfed44fff]
>[    0.150217] pci_bus 0000:05: resource 13 [mem 0xcfa00000-0xfebfffff]
>[    0.150219] pci_bus 0000:06: resource 1 [mem 0xfbe00000-0xfbefffff]
>[    0.150221] pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
>[    0.150223] pci_bus 0000:07: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
>[    0.150225] pci_bus 0000:08: resource 0 [io  0xd000-0xdfff]
>[    0.150226] pci_bus 0000:08: resource 1 [mem 0xfbc00000-0xfbcfffff]
>[    0.150228] pci_bus 0000:08: resource 2 [mem 0xcfe00000-0xcfefffff pref]
>[    0.150252] NET: Registered protocol family 2
>[    0.150443] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.150643] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>[    0.150826] TCP: Hash tables configured (established 65536 bind 65536)
>[    0.150904] TCP: reno registered
>[    0.150965] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.151047] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>[    0.151170] NET: Registered protocol family 1
>[    0.151466] IOAPIC[0]: Set routing entry (2-18 -> 0x41 -> IRQ 18 Mode:1 Active:1 Dest:15)
>[    0.162917] IOAPIC[0]: Set routing entry (2-23 -> 0x51 -> IRQ 23 Mode:1 Active:1 Dest:15)
>[    0.173877] pci 0000:01:00.0: Boot video device
>[    0.173927] IOAPIC[0]: Set routing entry (2-16 -> 0x61 -> IRQ 16 Mode:1 Active:1 Dest:15)
>[    0.173948] IOAPIC[0]: Set routing entry (2-17 -> 0x71 -> IRQ 17 Mode:1 Active:1 Dest:15)
>[    0.174094] PCI: CLS 4 bytes, default 64
>[    0.174128] Trying to unpack rootfs image as initramfs...
>[    0.401665] Freeing initrd memory: 13268K (ffff880036606000 - ffff8800372fb000)
>[    0.401739] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>[    0.401802] software IO TLB [mem 0xc6f80000-0xcaf80000] (64MB) mapped at [ffff8800c6f80000-ffff8800caf7ffff]
>[    0.402265] Scanning for low memory corruption every 60 seconds
>[    0.403515] audit: initializing netlink socket (disabled)
>[    0.403585] type=2000 audit(1387042217.387:1): initialized
>[    0.421351] bounce pool size: 64 pages
>[    0.421416] HugeTLB registered 2 MB page size, pre-allocated 0 pages
>[    0.428398] msgmni has been set to 15790
>[    0.428672] alg: No test for stdrng (krng)
>[    0.428848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
>[    0.428940] io scheduler noop registered (default)
>[    0.429220] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
>[    0.429313] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
>[    0.429391] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
>[    0.429722] IOAPIC[0]: Set routing entry (2-19 -> 0xa1 -> IRQ 19 Mode:1 Active:1 Dest:15)
>[    0.429891] intel_idle: MWAIT substates: 0x1120
>[    0.429893] intel_idle: v0.4 model 0x2A
>[    0.429894] intel_idle: lapic_timer_reliable_states 0xffffffff
>[    0.430053] GHES: HEST is not enabled!
>[    0.433288] brd: module loaded
>[    0.433489] TCP: cubic registered
>[    0.433555] Key type dns_resolver registered
>[    0.434261] 
>printing PIC contents
>[    0.434266] ... PIC  IMR: ffff
>[    0.434270] ... PIC  IRR: 1ca8
>[    0.434278] ... PIC  ISR: 0000
>[    0.434281] ... PIC ELCR: 1ca8
>[    0.434286] printing local APIC contents on CPU#0/0:
>[    0.434289] ... APIC ID:      00000000 (0)
>[    0.434350] ... APIC VERSION: 01060015
>[    0.434410] ... APIC TASKPRI: 00000000 (00)
>[    0.434411] ... APIC PROCPRI: 00000000
>[    0.434412] ... APIC LDR: 01000000
>[    0.434413] ... APIC DFR: ffffffff
>[    0.434414] ... APIC SPIV: 000001ff
>[    0.434415] ... APIC ISR field:
>[    0.434417] 0000000000000000000000000000000000000000000000000000000000000000
>[    0.434890] ... APIC TMR field:
>[    0.434891] 0000000000000000000000000000000000000000000000000000000000000000
>[    0.435373] ... APIC IRR field:
>[    0.435374] 0000000000000000000000000000000000000000000000000000000000008000
>[    0.435846] ... APIC ESR: 00000000
>[    0.435847] ... APIC ICR: 000008fd
>[    0.435848] ... APIC ICR2: 08000000
>[    0.435849] ... APIC LVTT: 000400ef
>[    0.435850] ... APIC LVTPC: 00000400
>[    0.435851] ... APIC LVT0: 00010700
>[    0.435852] ... APIC LVT1: 00000400
>[    0.435853] ... APIC LVTERR: 000000fe
>[    0.435854] ... APIC TMICT: 00000000
>[    0.435856] ... APIC TMCCT: 00000000
>[    0.435857] ... APIC TDCR: 0000000b
>
>[    0.435921] number of MP IRQ sources: 15.
>[    0.435923] number of IO-APIC #2 registers: 24.
>[    0.435924] testing the IO APIC.......................
>[    0.435992] IO APIC #2......
>[    0.435993] .... register #00: 00000000
>[    0.435994] .......    : physical APIC id: 00
>[    0.435995] .......    : Delivery Type: 0
>[    0.435996] .......    : LTS          : 0
>[    0.435997] .... register #01: 00170020
>[    0.435998] .......     : max redirection entries: 17
>[    0.435999] .......     : PRQ implemented: 0
>[    0.436000] .......     : IO APIC version: 20
>[    0.436002] .... IRQ redirection table:
>[    0.436006] 1    0    0   0   0    0    0    00
>[    0.436070] 0    0    0   0   0    1    1    31
>[    0.436147] 0    0    0   0   0    1    1    30
>[    0.436220] 0    0    0   0   0    1    1    33
>[    0.436281] 0    0    0   0   0    1    1    34
>[    0.436342] 0    0    0   0   0    1    1    35
>[    0.436403] 0    0    0   0   0    1    1    36
>[    0.436465] 0    0    0   0   0    1    1    37
>[    0.436526] 0    0    0   0   0    1    1    38
>[    0.436587] 0    1    0   0   0    1    1    39
>[    0.436648] 0    0    0   0   0    1    1    3A
>[    0.436710] 0    0    0   0   0    1    1    3B
>[    0.436771] 0    0    0   0   0    1    1    3C
>[    0.436832] 0    0    0   0   0    1    1    3D
>[    0.436893] 0    0    0   0   0    1    1    3E
>[    0.436954] 0    0    0   0   0    1    1    3F
>[    0.437016] 1    1    0   1   0    1    1    61
>[    0.437123] 1    1    0   1   0    1    1    71
>[    0.437196] 1    1    0   1   0    1    1    41
>[    0.437256] 1    1    0   1   0    1    1    A1
>[    0.437317] 1    0    0   0   0    0    0    00
>[    0.437378] 1    0    0   0   0    0    0    00
>[    0.437439] 1    0    0   0   0    0    0    00
>[    0.437500] 1    1    0   1   0    1    1    51
>[    0.437568] IRQ to pin mappings:
>[    0.437569] IRQ0 -> 0:2
>[    0.437571] IRQ1 -> 0:1
>[    0.437572] IRQ3 -> 0:3
>[    0.437574] IRQ4 -> 0:4
>[    0.437575] IRQ5 -> 0:5
>[    0.437577] IRQ6 -> 0:6
>[    0.437578] IRQ7 -> 0:7
>[    0.437579] IRQ8 -> 0:8
>[    0.437580] IRQ9 -> 0:9
>[    0.437582] IRQ10 -> 0:10
>[    0.437583] IRQ11 -> 0:11
>[    0.437585] IRQ12 -> 0:12
>[    0.437586] IRQ13 -> 0:13
>[    0.437587] IRQ14 -> 0:14
>[    0.437589] IRQ15 -> 0:15
>[    0.437590] IRQ16 -> 0:16
>[    0.437591] IRQ17 -> 0:17
>[    0.437593] IRQ18 -> 0:18
>[    0.437594] IRQ19 -> 0:19
>[    0.437595] IRQ23 -> 0:23
>[    0.437597] .................................... done.
>[    0.437955] registered taskstats version 1
>[    0.438478] /mnt/var-pub/src/linux-3.12.4-tuxonice/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>[    0.438575] TuxOnIce: Ignoring late initcall, as requested.
>[    0.438636] PM: Hibernation image not present or could not be loaded.
>[    0.439586] Freeing unused kernel memory: 880K (ffffffff81693000 - ffffffff8176f000)
>[    0.439651] Write protecting the kernel read-only data: 6144k
>[    0.441883] Freeing unused kernel memory: 1012K (ffff880001303000 - ffff880001400000)
>[    0.442704] Freeing unused kernel memory: 344K (ffff8800015aa000 - ffff880001600000)
>[    0.456737] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>[    0.456801] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>[    0.457064] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    0.495772] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    0.513795] Linux agpgart interface v0.103
>[    0.518011] [drm] Initialized drm 1.1.0 20060810
>[    0.531627] [drm] radeon kernel modesetting enabled.
>[    0.532023] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1043:0x03D8).
>[    0.532107] [drm] register mmio base: 0xFBAC0000
>[    0.532168] [drm] register mmio size: 131072
>[    0.532308] ATOM BIOS: 68F9.12.20.0.52.AS01
>[    0.532403] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
>[    0.532469] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
>[    0.532533] [drm] Detected VRAM RAM=1024M, BAR=256M
>[    0.532592] [drm] RAM width 64bits DDR
>[    0.532723] [TTM] Zone  kernel: Available graphics memory: 4043384 kiB
>[    0.532784] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
>[    0.532845] [TTM] Initializing pool allocator
>[    0.532907] [TTM] Initializing DMA pool allocator
>[    0.532981] [drm] radeon: 1024M of VRAM memory ready
>[    0.533041] [drm] radeon: 1024M of GTT memory ready.
>[    0.533266] [drm] GART: num cpu pages 262144, num gpu pages 262144
>[    0.533957] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
>[    0.540358] [drm] Loading CEDAR Microcode
>[    0.541336] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
>[    0.541479] radeon 0000:01:00.0: WB enabled
>[    0.541536] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880222c91c00
>[    0.541600] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880222c91c0c
>[    0.542403] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000441c418
>[    0.542468] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[    0.542524] [drm] Driver supports precise vblank timestamp query.
>[    0.542596] radeon 0000:01:00.0: irq 42 for MSI/MSI-X
>[    0.542606] radeon 0000:01:00.0: radeon: using MSI.
>[    0.542678] [drm] radeon: irq initialized.
>[    0.559126] [drm] ring test on 0 succeeded in 1 usecs
>[    0.559237] [drm] ring test on 3 succeeded in 1 usecs
>[    0.756595] [drm] ring test on 5 succeeded in 1 usecs
>[    0.756652] [drm] UVD initialized successfully.
>[    0.756847] [drm] Enabling audio 0 support
>[    0.756920] [drm] ib test on ring 0 succeeded in 0 usecs
>[    0.756992] [drm] ib test on ring 3 succeeded in 0 usecs
>[    0.928663] [drm] ib test on ring 5 succeeded
>[    0.930855] [drm] Radeon Display Connectors
>[    0.930914] [drm] Connector 0:
>[    0.930971] [drm]   DP-1
>[    0.931026] [drm]   HPD1
>[    0.931083] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
>[    0.931146] [drm]   Encoders:
>[    0.931212] [drm]     DFP1: INTERNAL_UNIPHY1
>[    0.931270] [drm] Connector 1:
>[    0.931326] [drm]   DVI-I-1
>[    0.931383] [drm]   HPD4
>[    0.931440] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
>[    0.931504] [drm]   Encoders:
>[    0.931561] [drm]     DFP2: INTERNAL_UNIPHY
>[    0.931618] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
>[    0.931688] [drm] Connector 2:
>[    0.931745] [drm]   VGA-1
>[    0.931802] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
>[    0.931866] [drm]   Encoders:
>[    0.931922] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
>[    0.932011] [drm] Internal thermal controller without fan control
>[    0.932200] [drm] radeon: power management initialized
>[    0.975339] [drm] fb mappable at 0xE045E000
>[    0.975395] [drm] vram apper at 0xE0000000
>[    0.975450] [drm] size 9216000
>[    0.977321] [drm] fb depth is 24
>[    0.977376] [drm]    pitch is 7680
>[    0.977803] fbcon: radeondrmfb (fb0) is primary device
>[    1.208023] Console: switching to colour frame buffer device 240x75
>[    1.213912] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
>[    1.213939] radeon 0000:01:00.0: registered panic notifier
>[    1.213969] [drm] Initialized radeon 2.34.0 20080528 for 0000:01:00.0 on minor 0
>[    1.222631] SCSI subsystem initialized
>[    1.238085] libata version 3.00 loaded.
>[    1.243912] ahci 0000:00:1f.2: version 3.0
>[    1.244060] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
>[    1.244087] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
>[    1.256062] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
>[    1.256136] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst 
>[    1.256177] ahci 0000:00:1f.2: setting latency timer to 64
>[    1.268063] scsi0 : ahci
>[    1.268237] scsi1 : ahci
>[    1.268388] scsi2 : ahci
>[    1.268548] scsi3 : ahci
>[    1.268695] scsi4 : ahci
>[    1.268845] scsi5 : ahci
>[    1.268981] ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 43
>[    1.269035] ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 43
>[    1.269076] ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 43
>[    1.269117] ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 43
>[    1.269157] ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 43
>[    1.269197] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 43
>[    1.269260] pcieport 0000:00:1c.7: driver skip pci_set_master, fix it!
>[    1.269368] ahci 0000:08:00.0: irq 44 for MSI/MSI-X
>[    1.269431] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
>[    1.269476] ahci 0000:08:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
>[    1.270197] scsi6 : ahci
>[    1.270363] scsi7 : ahci
>[    1.270501] ata7: SATA max UDMA/133 abar m512@0xfbcff000 port 0xfbcff100 irq 44
>[    1.270544] ata8: SATA max UDMA/133 abar m512@0xfbcff000 port 0xfbcff180 irq 44
>[    1.403224] tsc: Refined TSC clocksource calibration: 2494.333 MHz
>[    1.575424] ata8: SATA link down (SStatus 0 SControl 300)
>[    1.575531] ata7: SATA link down (SStatus 0 SControl 300)
>[    1.729700] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    1.741519] ata1.00: ATA-8: Corsair Force 3 SSD, 5.03, max UDMA/133
>[    1.741600] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
>[    1.766421] ata1.00: configured for UDMA/133
>[    1.766779] scsi 0:0:0:0: Direct-Access     ATA      Corsair Force 3  5.03 PQ: 0 ANSI: 5
>[    1.767513] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
>[    1.767615] sd 0:0:0:0: [sda] Write Protect is off
>[    1.767644] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    1.767665] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    1.768265]  sda: sda1 sda2
>[    1.768677] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.228163] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    2.228888] ata2.00: ATA-9: WDC WD30EZRX-00DC0B0, 80.00A80, max UDMA/133
>[    2.230069] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    2.232836] ata2.00: configured for UDMA/133
>[    2.234296] scsi 1:0:0:0: Direct-Access     ATA      WDC WD30EZRX-00D 80.0 PQ: 0 ANSI: 5
>[    2.236183] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
>[    2.237603] sd 1:0:0:0: [sdb] 4096-byte physical blocks
>[    2.239056] sd 1:0:0:0: [sdb] Write Protect is off
>[    2.240490] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    2.240505] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.309403]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
>[    2.312087] sd 1:0:0:0: [sdb] Attached SCSI disk
>[    2.404694] Switched to clocksource tsc
>[    2.541514] ata3: SATA link down (SStatus 0 SControl 300)
>[    3.003058] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[    3.012435] ata4.00: ATAPI: HL-DT-ST BD-RE  BH10LS38, 1.00, max UDMA/133
>[    3.022427] ata4.00: configured for UDMA/133
>[    3.046727] scsi 3:0:0:0: CD-ROM            HL-DT-ST BD-RE  BH10LS38  1.00 PQ: 0 ANSI: 5
>[    3.353441] ata5: SATA link down (SStatus 0 SControl 300)
>[    3.659792] ata6: SATA link down (SStatus 0 SControl 300)
>[    3.667620] device-mapper: uevent: version 1.0.3
>[    3.669401] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
>[    3.712731] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
>[    3.757161] TuxOnIce 3.3 (http://tuxonice.net)
>[    3.923594] bio: create slab <bio-1> at 1
>[   13.691389] sha256_ssse3: Using AVX optimized SHA-256 implementation
>[   14.575442] TuxOnIce: No image found.
>[   14.580250] CPU: 0 PID: 1 Comm: init2 Not tainted 3.12.4 #1
>[   14.581547] Hardware name: Gigabyte Technology Co., Ltd. Z68X-UD3H-B3/Z68X-UD3H-B3, BIOS F12 03/20/2012
>[   14.582852]  0000000000000026 ffff8802268c1d78 ffffffff812f3528 0000000000000001
>[   14.584181]  0000000000000026 ffff8802268c1da8 ffffffffa033cbe8 0000000000000004
>[   14.585506]  ffff880036c01000 0000000000000026 0000000000000000 ffff8802268c1dc8
>[   14.586803] Call Trace:
>[   14.588100]  [<ffffffff812f3528>] dump_stack+0x4f/0x84
>[   14.589423]  [<ffffffffa033cbe8>] toi_alloc_print_debug_stats+0xf7/0x136 [tuxonice_core]
>[   14.590717]  [<ffffffffa033cc98>] toi_free_page+0x2a/0x47 [tuxonice_core]
>[   14.591999]  [<ffffffffa0358e08>] forget_signature_page+0x61/0xc6 [tuxonice_bio]
>[   14.593272]  [<ffffffffa0356cc7>] close_resume_dev_t+0x85/0xc1 [tuxonice_bio]
>[   14.594539]  [<ffffffffa033c7c4>] toi_cleanup_modules+0x35/0x55 [tuxonice_core]
>[   14.595798]  [<ffffffffa033e500>] toi_finish_anything+0x12/0x85 [tuxonice_core]
>[   14.597047]  [<ffffffffa033d29f>] toi_unregister_sysfs_file+0x253/0x3d3 [tuxonice_core]
>[   14.598279]  [<ffffffff81174c05>] sysfs_write_file+0xf4/0x130
>[   14.599498]  [<ffffffff8111d414>] vfs_write+0xb4/0xff
>[   14.600701]  [<ffffffff8111d6f6>] SyS_write+0x59/0x82
>[   14.601907]  [<ffffffff812fd156>] system_call_fastpath+0x1a/0x1f
>[   14.603109] Idx  Allocs   Frees   Tests   Fails     Max Description
>[   14.604315]  38       0       1       0       0       0 setting swap signature
>[   22.263729] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
>[   23.055213] systemd-udevd[2820]: starting version 208
>[   23.099918] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
>[   23.099924] ACPI: Power Button [PWRB]
>[   23.099980] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
>[   23.099983] ACPI: Power Button [PWRF]
>[   23.113307] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20130725/utaddress-251)
>[   23.113314] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[   23.113336] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[   23.115624] ACPI: Requesting acpi_cpufreq
>[   23.123068] rtc_cmos 00:03: RTC can wake from S4
>[   23.123207] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>[   23.123239] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
>[   23.127979] mei_me 0000:00:16.0: setting latency timer to 64
>[   23.128038] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
>[   23.137465] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>[   23.140714] ACPI: bus type USB registered
>[   23.140740] usbcore: registered new interface driver usbfs
>[   23.140751] usbcore: registered new interface driver hub
>[   23.145747] usbcore: registered new device driver usb
>[   23.156332] io scheduler deadline registered
>[   23.158114] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
>[   23.159611] io scheduler cfq registered
>[   23.165612] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[   23.168454] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
>[   23.176083] input: PC Speaker as /devices/platform/pcspkr/input/input3
>[   23.178364] ehci-pci: EHCI PCI platform driver
>[   23.178479] ehci-pci 0000:00:1a.0: setting latency timer to 64
>[   23.178490] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[   23.178495] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[   23.178509] ehci-pci 0000:00:1a.0: debug port 2
>[   23.182396] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
>[   23.182404] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
>[   23.188073] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[   23.188225] hub 1-0:1.0: USB hub found
>[   23.188233] hub 1-0:1.0: 2 ports detected
>[   23.188427] ehci-pci 0000:00:1d.0: setting latency timer to 64
>[   23.188435] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[   23.188440] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[   23.188452] ehci-pci 0000:00:1d.0: debug port 2
>[   23.192425] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[   23.192435] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
>[   23.192440] pcieport 0000:00:1c.6: driver skip pci_set_master, fix it!
>[   23.192476] pci 0000:04:00.0: setting latency timer to 64
>[   23.192684] r8169 0000:07:00.0: irq 46 for MSI/MSI-X
>[   23.192818] r8169 0000:07:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000a300000, 50:e5:49:c6:b4:7c, XID 0c900800 IRQ 46
>[   23.192820] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>[   23.193038] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
>[   23.193052] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
>[   23.196113] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x25
>[   23.196254] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
>[   23.198081] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[   23.198216] hub 2-0:1.0: USB hub found
>[   23.198223] hub 2-0:1.0: 2 ports detected
>[   23.198320] xhci_hcd 0000:02:00.0: xHCI Host Controller
>[   23.198327] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
>[   23.198410] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
>[   23.198561] hub 3-0:1.0: USB hub found
>[   23.198569] hub 3-0:1.0: 2 ports detected
>[   23.198641] xhci_hcd 0000:02:00.0: xHCI Host Controller
>[   23.198645] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
>[   23.198755] hub 4-0:1.0: USB hub found
>[   23.198763] hub 4-0:1.0: 2 ports detected
>[   23.200087] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x25
>[   23.200652] microcode: CPU0 updated to revision 0x28, date = 2012-04-24
>[   23.200659] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x25
>[   23.200680] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x25
>[   23.200963] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
>[   23.200971] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x25
>[   23.200994] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x25
>[   23.201279] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
>[   23.201293] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x25
>[   23.201313] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x25
>[   23.201598] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
>[   23.201601] perf_event_intel: PEBS enabled due to microcode update
>[   23.201637] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>[   23.203165] xhci_hcd 0000:06:00.0: xHCI Host Controller
>[   23.203171] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
>[   23.203318] xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X
>[   23.203652] hub 5-0:1.0: USB hub found
>[   23.203662] hub 5-0:1.0: 2 ports detected
>[   23.203740] xhci_hcd 0000:06:00.0: xHCI Host Controller
>[   23.203745] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
>[   23.203861] hub 6-0:1.0: USB hub found
>[   23.203871] hub 6-0:1.0: 2 ports detected
>[   23.205425] Error: Driver 'pcspkr' is already registered, aborting...
>[   23.210010] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>[   23.210013] cdrom: Uniform CD-ROM driver Revision: 3.20
>[   23.210117] sr 3:0:0:0: Attached scsi CD-ROM sr0
>[   23.223535] alg: No test for crc32 (crc32-pclmul)
>[   23.225584] IOAPIC[0]: Set routing entry (2-22 -> 0x62 -> IRQ 22 Mode:1 Active:1 Dest:15)
>[   23.225618] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
>[   23.235109] iTCO_vendor_support: vendor-support=0
>[   23.241516] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[   23.241549] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
>[   23.245211] firewire_ohci 0000:05:02.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
>[   23.245274] flexcop-pci: will use the HW PID filter.
>[   23.245277] flexcop-pci: card revision 2
>[   23.248190] systemd-udevd[2850]: renamed network interface eth0 to realtek
>[   23.249404] DVB: registering new adapter (FlexCop Digital TV device)
>[   23.251055] b2c2-flexcop: MAC address = 00:d0:d7:08:05:c7
>[   23.267423] b2c2-flexcop: found 'ST STV0297 DVB-C' .
>[   23.267430] b2c2_flexcop_pci 0000:05:01.0: DVB: registering adapter 0 frontend 0 (ST STV0297 DVB-C)...
>[   23.267474] b2c2-flexcop: initialization of 'Cable2PC/CableStar 2 DVB-C' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
>[   23.268064] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
>[   23.268132] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>[   23.268226] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
>[   23.268281] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>[   23.268335] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>[   23.271208] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>[   23.271491] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
>[   23.271558] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
>[   23.271614] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
>[   23.271986] snd_hda_intel 0000:01:00.1: irq 50 for MSI/MSI-X
>[   23.272319] [drm] Memory usable by graphics device = 2048M
>[   23.272325] i915 0000:00:02.0: setting latency timer to 64
>[   23.274626] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
>[   23.289001] i915 0000:00:02.0: irq 51 for MSI/MSI-X
>[   23.289010] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>[   23.289012] [drm] Driver supports precise vblank timestamp query.
>[   23.289026] [drm:i915_stolen_to_physical] *ERROR* conflict detected with stolen region: [0xcba00000 - 0xcfa00000]
>[   23.289062] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[   23.303276] [drm] Wrong MCH_SSKPD value: 0x16040307
>[   23.303279] [drm] This can cause pipe underruns and display issues.
>[   23.303280] [drm] Please upgrade your BIOS to fix this.
>[   23.399276] i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
>[   23.399290] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1
>[   23.490541] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[   23.605373] hub 1-1:1.0: USB hub found
>[   23.605471] hub 1-1:1.0: 6 ports detected
>[   23.708676] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[   23.746850] firewire_core 0000:05:02.0: created device fw0: GUID 0049e5507bc80600, S400
>[   23.823991] hub 2-1:1.0: USB hub found
>[   23.824088] hub 2-1:1.0: 8 ports detected
>[   23.898023] usb 1-1.5: new high-speed USB device number 3 using ehci-pci
>[   23.983692] hub 1-1.5:1.0: USB hub found
>[   23.983879] hub 1-1.5:1.0: 6 ports detected
>[   24.188952] i2c /dev entries driver
>[   24.247959] NET: Registered protocol family 10
>[   24.258493] usb 1-1.5.1: new low-speed USB device number 4 using ehci-pci
>[   24.261623] loop: module loaded
>[   24.364435] hidraw: raw HID events driver (C) Jiri Kosina
>[   24.369396] usbcore: registered new interface driver usbhid
>[   24.369398] usbhid: USB HID core driver
>[   24.370870] input: HID 413c:3010 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/input/input14
>[   24.371608] hid-generic 0003:413C:3010.0001: input,hidraw0: USB HID v1.10 Mouse [HID 413c:3010] on usb-0000:00:1a.0-1.5.1/input0
>[   24.372984] mousedev: PS/2 mouse device common for all mice
>[   24.741867] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[   24.832364] EXT4-fs (dm-2): re-mounted. Opts: discard
>[   24.970189] Adding 16777212k swap on /dev/mapper/vg.wd30ezrx.plain-swap1.  Priority:-1 extents:1 across:16777212k 
>[   25.000642] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>[   25.005519] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
>[   25.039933] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
>[   25.119032] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
>[   25.171344] Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
>[   25.171382] Unsafe core_pattern used with suid_dumpable=2. Pipe handler or fully qualified core dump path required.
>[   25.407079] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   25.427631] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>[   25.530119] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   26.010382] r8169 0000:07:00.0 realtek: link down
>[   26.010387] r8169 0000:07:00.0 realtek: link down
>[   26.010415] IPv6: ADDRCONF(NETDEV_UP): realtek: link is not ready
>[   27.593657] r8169 0000:07:00.0 realtek: link up
>[   27.593666] IPv6: ADDRCONF(NETDEV_CHANGE): realtek: link becomes ready
>[   27.634771] NET: Registered protocol family 17
>[   32.271492] it87: Found IT8728F chip at 0x290, revision 1
>[   32.271512] it87: Beeping is supported
>[   44.729603] SysRq : Changing Loglevel
>[   44.729650] Loglevel set to 8
>[  123.721264] EXT4-fs (dm-2): re-mounted. Opts: discard,commit=0
>[  123.729530] EXT4-fs (sda1): re-mounted. Opts: commit=0
>[  124.016049] EXT4-fs (dm-5): re-mounted. Opts: commit=0
>[  124.302249] EXT4-fs (dm-0): re-mounted. Opts: commit=0
>[  852.480484] ehci-pci 0000:00:1d.0: remove, state 4
>[  852.480542] usb usb2: USB disconnect, device number 1
>[  852.480590] usb 2-1: USB disconnect, device number 2
>[  852.485095] ehci-pci 0000:00:1d.0: USB bus 2 deregistered
>[  852.487921] ehci-pci 0000:00:1a.0: remove, state 1
>[  852.490632] usb usb1: USB disconnect, device number 1
>[  852.490634] usb 1-1: USB disconnect, device number 2
>[  852.490636] usb 1-1.5: USB disconnect, device number 3
>[  852.490638] usb 1-1.5.1: USB disconnect, device number 4
>[  852.514605] ehci-pci 0000:00:1a.0: USB bus 1 deregistered
>[  852.784130] TuxOnIce: No image found.
>[  852.793261] TuxOnIce 3.3, with support for checksumming, usm, block i/o, compression, swap storage, userui.
>[  852.793515] Initiating a hibernation cycle.
>[  852.794682] TuxOnIce: Userui program not configured.
>[  852.794917] Starting other threads.
>[  852.796119] Freezing processes & syncing filesystems.
>[  852.796174] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[  852.797540] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[  852.971344] Preparing Image. Try 1.
>[  853.345557] Restarting kernel threads ... done.
>[  853.400622] Freezing remaining freezable tasks ... (elapsed 0.031 seconds) done.
>[  853.581033] Starting to save the image..
>[  853.581069] Writing caches...
>[  853.634144] ...20%...40%...60%...80%
>[  853.972003] Waited for i/o due to synchronous I/O 7 times.
>[  853.972053] Doing atomic copy/restore.
>[  853.972583] serial 00:06: disabled
>[  853.972634] serial 00:06: System wakeup disabled by ACPI
>[  853.973038] mei_me 0000:00:16.0: suspend
>[  853.986960] [drm] Disabling audio 0 support
>[  854.085981] PM: freeze of devices complete after 113.630 msecs
>[  854.086081] PM: late freeze of devices complete after 0.094 msecs
>[  854.086754] PM: noirq freeze of devices complete after 0.668 msecs
>[  854.087087] ACPI: Preparing to enter system sleep state S4
>[  854.087742] PM: Saving platform NVS memory
>[  854.087859] Disabling non-boot CPUs ...
>[  854.089104] smpboot: CPU 1 is now offline
>[  854.090612] smpboot: CPU 2 is now offline
>[  854.092034] smpboot: CPU 3 is now offline
>[  854.092931] PM: Restoring platform NVS memory
>[  854.093279] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
>[  854.093283] Enabling non-boot CPUs ...
>[  854.093333] smpboot: Booting Node 0 Processor 1 APIC 0x2
>[  854.104392] masked ExtINT on CPU#1
>[  854.106739] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x25
>[  854.107249] microcode: CPU1 updated to revision 0x28, date = 2012-04-24
>[  854.107259] CPU1 is up
>[  854.107288] smpboot: Booting Node 0 Processor 2 APIC 0x4
>[  854.118412] masked ExtINT on CPU#2
>[  854.120783] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x25
>[  854.121062] microcode: CPU2 updated to revision 0x28, date = 2012-04-24
>[  854.121068] CPU2 is up
>[  854.121098] smpboot: Booting Node 0 Processor 3 APIC 0x6
>[  854.132222] masked ExtINT on CPU#3
>[  854.134623] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x25
>[  854.134922] microcode: CPU3 updated to revision 0x28, date = 2012-04-24
>[  854.134929] CPU3 is up
>[  854.137423] ACPI: Waking up from system sleep state S4
>[  854.170605] PM: noirq restore of devices complete after 32.517 msecs
>[  854.170711] PM: early restore of devices complete after 0.081 msecs
>[  854.170737] i915 0000:00:02.0: setting latency timer to 64
>[  854.170756] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
>[  854.170834] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>[  854.170875] ahci 0000:00:1f.2: setting latency timer to 64
>[  854.170886] usb usb3: root hub lost power or was reset
>[  854.170887] usb usb4: root hub lost power or was reset
>[  854.170918] snd_hda_intel 0000:01:00.1: irq 49 for MSI/MSI-X
>[  854.170975] pci 0000:04:00.0: setting latency timer to 64
>[  854.171009] usb usb5: root hub lost power or was reset
>[  854.171010] usb usb6: root hub lost power or was reset
>[  854.171024] xhci_hcd 0000:02:00.0: irq 47 for MSI/MSI-X
>[  854.171177] xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X
>[  854.173459] [drm] PCIE gen 2 link speeds already enabled
>[  854.176727] [drm] Wrong MCH_SSKPD value: 0x16040307
>[  854.176727] [drm] This can cause pipe underruns and display issues.
>[  854.176728] [drm] Please upgrade your BIOS to fix this.
>[  854.176939] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
>[  854.177016] radeon 0000:01:00.0: WB enabled
>[  854.177018] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880222c91c00
>[  854.177019] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880222c91c0c
>[  854.177823] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000441c418
>[  854.194065] [drm] ring test on 0 succeeded in 1 usecs
>[  854.194121] [drm] ring test on 3 succeeded in 1 usecs
>[  854.391419] [drm] ring test on 5 succeeded in 1 usecs
>[  854.391421] [drm] UVD initialized successfully.
>[  854.391423] [drm] Enabling audio 0 support
>[  854.391452] [drm] ib test on ring 0 succeeded in 0 usecs
>[  854.391471] [drm] ib test on ring 3 succeeded in 1 usecs
>[  854.477654] ata7: SATA link down (SStatus 0 SControl 300)
>[  854.477687] ata8: SATA link down (SStatus 0 SControl 300)
>[  854.483649] ata3: SATA link down (SStatus 0 SControl 300)
>[  854.483682] ata5: SATA link down (SStatus 0 SControl 300)
>[  854.485652] ata6: SATA link down (SStatus 0 SControl 300)
>[  854.630832] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  854.638834] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[  854.638851] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  854.640081] ata2.00: configured for UDMA/133
>[  854.650951] ata4.00: configured for UDMA/133
>[  854.651070] sd 1:0:0:0: [sdb] Starting disk
>[  854.652681] ata1.00: configured for UDMA/133
>[  854.664135] sd 0:0:0:0: [sda] Starting disk
>[  854.724969] firewire_core 0000:05:02.0: rediscovered device fw0
>[  855.700170] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  864.574325] radeon 0000:01:00.0: GPU lockup CP stall for more than 10000msec
>[  864.574328] radeon 0000:01:00.0: GPU lockup (waiting for 0x0000000000000004 last fence id 0x0000000000000002)
>[  864.574331] [drm:uvd_v1_0_ib_test] *ERROR* radeon: fence wait failed (-35).
>[  864.574334] [drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on ring 5 (-35).
>[  865.058891] PM: restore of devices complete after 10875.629 msecs
>[  865.060965] Post atomic.
>[  865.062863] Reading caches...
>[  865.869068] ...20%...40%...60%...80%
>[  866.106844] Waited for i/o due to readahead not ready 12369 times.
>[  866.108352] Waited for i/o due to throughput_throttle 11762 times.
>[  866.110301] Cleaning up...
>[  866.114293] Restarting tasks ... done.
>[  866.125402] TuxOnIce debugging info:
>- TuxOnIce core  : 3.3
>- Kernel Version : 3.12.4
>- Compiler vers. : 4.6
>- Attempt number : 1
>- Parameters     : 0 663561 0 7 -2 5
>- Overall expected compression percentage: 0.
>- Checksum method is 'md4'.
>  0 pages resaved in atomic copy.
>- Block I/O active.
>  Used 46525 pages from swap on /dev/mapper/vg.wd30ezrx.plain-swap1.
>- Max outstanding reads 1024. Max writes 5425.
>  Memory_needed: 1024 x (4096 + 376 + 128) = 4710400 bytes.
>  Free mem throttle point reached 0.
>- Compressor is 'lzo'.
>  Compressed 705622016 bytes into 187509481 (73 percent compression).
>- Swap Allocator enabled.
>  Swap available for image: 4194303 pages.
>- I/O speed: Write 346 MB/s, Read 340 MB/s.
>- Extra pages    : 232 used/2000.
>- Result         : Succeeded.
>[  866.160167] CPU: 0 PID: 6557 Comm: hibernate Not tainted 3.12.4 #1
>[  866.161640] Hardware name: Gigabyte Technology Co., Ltd. Z68X-UD3H-B3/Z68X-UD3H-B3, BIOS F12 03/20/2012
>[  866.161644]  0000000000000026 ffff8800c6187d78 ffffffff812f3528 0000000000000001
>[  866.161646]  0000000000000026 ffff8800c6187da8 ffffffffa033cbe8 ffff88022fa15ca0
>[  866.161648]  ffff880222f68000 0000000000000026 0000000000000000 ffff8800c6187dc8
>[  866.161648] Call Trace:
>[  866.161653]  [<ffffffff812f3528>] dump_stack+0x4f/0x84
>[  866.161671]  [<ffffffffa033cbe8>] toi_alloc_print_debug_stats+0xf7/0x136 [tuxonice_core]
>[  866.161676]  [<ffffffffa033cc98>] toi_free_page+0x2a/0x47 [tuxonice_core]
>[  866.161681]  [<ffffffffa0358e08>] forget_signature_page+0x61/0xc6 [tuxonice_bio]
>[  866.161685]  [<ffffffffa0356cc7>] close_resume_dev_t+0x85/0xc1 [tuxonice_bio]
>[  866.161689]  [<ffffffffa033c7c4>] toi_cleanup_modules+0x35/0x55 [tuxonice_core]
>[  866.161693]  [<ffffffffa033e500>] toi_finish_anything+0x12/0x85 [tuxonice_core]
>[  866.161698]  [<ffffffffa033d29f>] toi_unregister_sysfs_file+0x253/0x3d3 [tuxonice_core]
>[  866.161703]  [<ffffffff81174c05>] sysfs_write_file+0xf4/0x130
>[  866.161705]  [<ffffffff8111d414>] vfs_write+0xb4/0xff
>[  866.161707]  [<ffffffff8111d6f6>] SyS_write+0x59/0x82
>[  866.161710]  [<ffffffff812fd156>] system_call_fastpath+0x1a/0x1f
>[  866.161714] Idx  Allocs   Frees   Tests   Fails     Max Description
>[  866.161715]  38       0       1       0       0       0 setting swap signature
>[  866.189406] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[  866.190373] ehci-pci: EHCI PCI platform driver
>[  866.190487] ehci-pci 0000:00:1a.0: setting latency timer to 64
>[  866.190497] ehci-pci 0000:00:1a.0: EHCI Host Controller
>[  866.190502] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
>[  866.190515] ehci-pci 0000:00:1a.0: debug port 2
>[  866.194411] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
>[  866.194417] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
>[  866.200153] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
>[  866.201479] hub 1-0:1.0: USB hub found
>[  866.201486] hub 1-0:1.0: 2 ports detected
>[  866.206245] ehci-pci 0000:00:1d.0: setting latency timer to 64
>[  866.206251] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[  866.206256] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
>[  866.206267] ehci-pci 0000:00:1d.0: debug port 2
>[  866.210176] ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
>[  866.210186] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
>[  866.216168] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[  866.216389] hub 2-0:1.0: USB hub found
>[  866.216396] hub 2-0:1.0: 2 ports detected
>[  866.227614] flexcop-pci: will use the HW PID filter.
>[  866.229539] flexcop-pci: card revision 2
>[  866.235464] DVB: registering new adapter (FlexCop Digital TV device)
>[  866.240011] b2c2-flexcop: MAC address = 00:d0:d7:08:05:c7
>[  866.242674] b2c2-flexcop: found 'ST STV0297 DVB-C' .
>[  866.244859] b2c2_flexcop_pci 0000:05:01.0: DVB: registering adapter 0 frontend 0 (ST STV0297 DVB-C)...
>[  866.247118] b2c2-flexcop: initialization of 'Cable2PC/CableStar 2 DVB-C' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
>[  866.256138] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>[  866.257820] r8169 0000:07:00.0: can't disable ASPM; OS doesn't have ASPM control
>[  866.260134] r8169 0000:07:00.0: irq 50 for MSI/MSI-X
>[  866.262517] r8169 0000:07:00.0 eth0: RTL8168evl/8111evl at 0xffffc90009232000, 50:e5:49:c6:b4:7c, XID 0c900800 IRQ 50
>[  866.264748] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>[  866.281382] systemd-udevd[5894]: renamed network interface eth0 to realtek
>[  866.503541] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[  866.510600] r8169 0000:07:00.0 realtek: link down
>[  866.510640] r8169 0000:07:00.0 realtek: link down
>[  866.513320] IPv6: ADDRCONF(NETDEV_UP): realtek: link is not ready
>[  866.527330] it87: Found IT8728F chip at 0x290, revision 1
>[  866.529251] it87: Beeping is supported
>[  866.619545] hub 1-1:1.0: USB hub found
>[  866.621896] hub 1-1:1.0: 6 ports detected
>[  866.726826] usb 2-1: new high-speed USB device number 2 using ehci-pci
>[  866.843507] hub 2-1:1.0: USB hub found
>[  866.845861] hub 2-1:1.0: 8 ports detected
>[  866.922223] usb 1-1.5: new high-speed USB device number 3 using ehci-pci
>[  867.009817] hub 1-1.5:1.0: USB hub found
>[  867.012158] hub 1-1.5:1.0: 6 ports detected
>[  867.288625] usb 1-1.5.1: new low-speed USB device number 4 using ehci-pci
>[  867.382488] input: HID 413c:3010 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/input/input15
>[  867.385158] hid-generic 0003:413C:3010.0002: input,hidraw0: USB HID v1.10 Mouse [HID 413c:3010] on usb-0000:00:1a.0-1.5.1/input0
>[  868.104122] r8169 0000:07:00.0 realtek: link up
>[  868.106499] IPv6: ADDRCONF(NETDEV_CHANGE): realtek: link becomes ready
>[ 1201.540772] tun: Universal TUN/TAP device driver, 1.6
>[ 1201.540778] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

Actions: View

Attachments on bug 72716: 90784 | 90785 | 91087

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.