Attachment 90856 Details for Bug 72211 – dmesg after a round of s3 with the suspend improve kernel

dmesg after a round of s3 with the suspend improve kernel

dmesg_suspend-improvements_responsetime_hswu22_eDP_qingshuai_20131217.txt (text/plain), 121.67 KB, created by Qingshuai Tian on 2013-12-17 03:41:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Qingshuai Tian

Created: 2013-12-17 03:41:09 UTC

Size: 121.67 KB

patch

obsolete

>[    1.645959] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 21 usecs
>[    1.645963] calling  acpi_fan_driver_init+0x0/0x12 @ 1
>[    1.646210] initcall acpi_fan_driver_init+0x0/0x12 returned 0 after 234 usecs
>[    1.646215] calling  acpi_processor_driver_init+0x0/0x49 @ 1
>[    1.656140] Monitor-Mwait will be used to enter C-1 state
>[    1.656151] Monitor-Mwait will be used to enter C-2 state
>[    1.656191] ACPI: acpi_idle registered with cpuidle
>[    1.670926] initcall acpi_processor_driver_init+0x0/0x49 returned 0 after 24114 usecs
>[    1.670932] calling  acpi_thermal_init+0x0/0x42 @ 1
>[    1.684794] thermal LNXTHERM:00: registered as thermal_zone0
>[    1.684799] ACPI: Thermal Zone [TZ00] (49 C)
>[    1.685088] initcall acpi_thermal_init+0x0/0x42 returned 0 after 13809 usecs
>[    1.685093] calling  pty_init+0x0/0x20d @ 1
>[    1.685517] initcall pty_init+0x0/0x20d returned 0 after 408 usecs
>[    1.685522] calling  sysrq_init+0x0/0x90 @ 1
>[    1.685548] initcall sysrq_init+0x0/0x90 returned 0 after 20 usecs
>[    1.685551] calling  serial8250_init+0x0/0x143 @ 1
>[    1.685554] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>[    1.688896] initcall serial8250_init+0x0/0x143 returned 0 after 3257 usecs
>[    1.688902] calling  serial_pci_driver_init+0x0/0x1b @ 1
>[    1.689189] initcall serial_pci_driver_init+0x0/0x1b returned 0 after 272 usecs
>[    1.689193] calling  hpet_init+0x0/0x65 @ 1
>[    1.690630] initcall hpet_init+0x0/0x65 returned 0 after 1395 usecs
>[    1.690635] calling  nvram_init+0x0/0x7d @ 1
>[    1.691037] Non-volatile memory driver v1.3
>[    1.691044] initcall nvram_init+0x0/0x7d returned 0 after 393 usecs
>[    1.691047] calling  mod_init+0x0/0x4f @ 1
>[    1.691052] initcall mod_init+0x0/0x4f returned -19 after 0 usecs
>[    1.691056] calling  agp_init+0x0/0x29 @ 1
>[    1.691058] Linux agpgart interface v0.103
>[    1.691063] initcall agp_init+0x0/0x29 returned 0 after 2 usecs
>[    1.691066] calling  agp_amd64_mod_init+0x0/0x21 @ 1
>[    1.691655] initcall agp_amd64_mod_init+0x0/0x21 returned -19 after 569 usecs
>[    1.691660] calling  agp_intel_init+0x0/0x2a @ 1
>[    1.691966] initcall agp_intel_init+0x0/0x2a returned 0 after 293 usecs
>[    1.691970] calling  agp_sis_init+0x0/0x2a @ 1
>[    1.692218] initcall agp_sis_init+0x0/0x2a returned 0 after 236 usecs
>[    1.692222] calling  agp_via_init+0x0/0x2a @ 1
>[    1.692441] initcall agp_via_init+0x0/0x2a returned 0 after 208 usecs
>[    1.692445] calling  cn_proc_init+0x0/0x38 @ 1
>[    1.692471] initcall cn_proc_init+0x0/0x38 returned 0 after 20 usecs
>[    1.692476] calling  topology_sysfs_init+0x0/0x5c @ 1
>[    1.692631] initcall topology_sysfs_init+0x0/0x5c returned 0 after 146 usecs
>[    1.692635] calling  brd_init+0x0/0x1a7 @ 1
>[    1.713138] brd: module loaded
>[    1.713147] initcall brd_init+0x0/0x1a7 returned 0 after 20016 usecs
>[    1.713152] calling  mac_hid_init+0x0/0x22 @ 1
>[    1.713176] initcall mac_hid_init+0x0/0x22 returned 0 after 18 usecs
>[    1.713179] calling  scsi_tgt_init+0x0/0x8f @ 1
>[    1.713663] initcall scsi_tgt_init+0x0/0x8f returned 0 after 468 usecs
>[    1.713666] calling  raid_init+0x0/0x12 @ 1
>[    1.713886] initcall raid_init+0x0/0x12 returned 0 after 210 usecs
>[    1.713889] calling  spi_transport_init+0x0/0x76 @ 1
>[    1.714246] initcall spi_transport_init+0x0/0x76 returned 0 after 343 usecs
>[    1.714249] calling  fc_transport_init+0x0/0x89 @ 1
>[    1.714945] initcall fc_transport_init+0x0/0x89 returned 0 after 674 usecs
>[    1.714948] calling  iscsi_transport_init+0x0/0x1ba @ 1
>[    1.714950] Loading iSCSI transport class v2.0-870.
>[    1.716338] initcall iscsi_transport_init+0x0/0x1ba returned 0 after 1352 usecs
>[    1.716342] calling  sas_transport_init+0x0/0xbf @ 1
>[    1.717378] initcall sas_transport_init+0x0/0xbf returned 0 after 1005 usecs
>[    1.717381] calling  sas_class_init+0x0/0x34 @ 1
>[    1.717405] initcall sas_class_init+0x0/0x34 returned 0 after 19 usecs
>[    1.717407] calling  srp_transport_init+0x0/0x38 @ 1
>[    1.717742] initcall srp_transport_init+0x0/0x38 returned 0 after 322 usecs
>[    1.717745] calling  iscsi_sw_tcp_init+0x0/0x42 @ 1
>[    1.718094] iscsi: registered transport (tcp)
>[    1.718099] initcall iscsi_sw_tcp_init+0x0/0x42 returned 0 after 341 usecs
>[    1.718101] calling  blogic_init+0x0/0xfe3 @ 1
>[    1.718185] initcall blogic_init+0x0/0xfe3 returned 0 after 77 usecs
>[    1.718190] calling  arcmsr_module_init+0x0/0x20 @ 1
>[    1.718448] initcall arcmsr_module_init+0x0/0x20 returned 0 after 246 usecs
>[    1.718451] calling  ahc_linux_init+0x0/0x66 @ 1
>[    1.718717] initcall ahc_linux_init+0x0/0x66 returned 0 after 255 usecs
>[    1.718720] calling  ahd_linux_init+0x0/0x7c @ 1
>[    1.719035] initcall ahd_linux_init+0x0/0x7c returned 0 after 303 usecs
>[    1.719038] calling  aac_init+0x0/0x79 @ 1
>[    1.719041] Adaptec aacraid driver 1.2-0[30200]-ms
>[    1.719318] initcall aac_init+0x0/0x79 returned 0 after 269 usecs
>[    1.719321] calling  init_this_scsi_driver+0x0/0xd9 @ 1
>[    1.719475] initcall init_this_scsi_driver+0x0/0xd9 returned -19 after 146 usecs
>[    1.719478] calling  aic94xx_init+0x0/0x12d @ 1
>[    1.719480] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
>[    1.719798] initcall aic94xx_init+0x0/0x12d returned 0 after 308 usecs
>[    1.719801] calling  ips_module_init+0x0/0x189 @ 1
>[    1.720262] initcall ips_module_init+0x0/0x189 returned -19 after 445 usecs
>[    1.720265] calling  qla1280_init+0x0/0x1b @ 1
>[    1.720520] initcall qla1280_init+0x0/0x1b returned 0 after 244 usecs
>[    1.720524] calling  qla2x00_module_init+0x0/0x20b @ 1
>[    1.720578] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.06.00.08-k.
>[    1.720857] initcall qla2x00_module_init+0x0/0x20b returned 0 after 321 usecs
>[    1.720861] calling  qla4xxx_module_init+0x0/0xe1 @ 1
>[    1.721186] iscsi: registered transport (qla4xxx)
>[    1.721439] QLogic iSCSI HBA Driver
>[    1.721444] initcall qla4xxx_module_init+0x0/0xe1 returned 0 after 565 usecs
>[    1.721447] calling  sym2_init+0x0/0xf9 @ 1
>[    1.721708] initcall sym2_init+0x0/0xf9 returned 0 after 250 usecs
>[    1.721711] calling  dc395x_module_init+0x0/0x1b @ 1
>[    1.722292] initcall dc395x_module_init+0x0/0x1b returned 0 after 562 usecs
>[    1.722295] calling  dc390_module_init+0x0/0x99 @ 1
>[    1.722298] DC390: clustering now enabled by default. If you get problems load
>[    1.722299]        with "disable_clustering=1" and report to maintainers
>[    1.722546] initcall dc390_module_init+0x0/0x99 returned 0 after 240 usecs
>[    1.722549] calling  atp870u_init+0x0/0x1b @ 1
>[    1.722756] initcall atp870u_init+0x0/0x1b returned 0 after 197 usecs
>[    1.722768] calling  gdth_init+0x0/0xfd @ 1
>[    1.722771] GDT-HA: Storage RAID Controller Driver. Version: 3.05
>[    1.723037] initcall gdth_init+0x0/0xfd returned 0 after 257 usecs
>[    1.723040] calling  initio_init_driver+0x0/0x1b @ 1
>[    1.723260] initcall initio_init_driver+0x0/0x1b returned 0 after 210 usecs
>[    1.723263] calling  inia100_init+0x0/0x1b @ 1
>[    1.723470] initcall inia100_init+0x0/0x1b returned 0 after 197 usecs
>[    1.723473] calling  hptiop_module_init+0x0/0x37 @ 1
>[    1.723475] RocketRAID 3xxx/4xxx Controller driver v1.8
>[    1.723687] initcall hptiop_module_init+0x0/0x37 returned 0 after 205 usecs
>[    1.723690] calling  stex_init+0x0/0x30 @ 1
>[    1.723693] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
>[    1.723994] initcall stex_init+0x0/0x30 returned 0 after 292 usecs
>[    1.723998] calling  mvs_init+0x0/0x9f @ 1
>[    1.724284] initcall mvs_init+0x0/0x9f returned 0 after 275 usecs
>[    1.724287] calling  init_st+0x0/0x170 @ 1
>[    1.724290] st: Version 20101219, fixed bufsize 32768, s/g segs 256
>[    1.724671] initcall init_st+0x0/0x170 returned 0 after 370 usecs
>[    1.724675] calling  init_osst+0x0/0x148 @ 1
>[    1.724678] osst :I: Tape driver with OnStream support version 0.99.4
>osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
>[    1.725367] initcall init_osst+0x0/0x148 returned 0 after 671 usecs
>[    1.725370] calling  init_sd+0x0/0x167 @ 1
>[    1.725891] initcall init_sd+0x0/0x167 returned 0 after 503 usecs
>[    1.725894] calling  init_sr+0x0/0x42 @ 1
>[    1.726124] initcall init_sr+0x0/0x42 returned 0 after 220 usecs
>[    1.726127] calling  init_sg+0x0/0x120 @ 1
>[    1.726421] initcall init_sg+0x0/0x120 returned 0 after 282 usecs
>[    1.726424] calling  init_ch_module+0x0/0xae @ 1
>[    1.726427] SCSI Media Changer driver v0.25 
>[    1.726835] initcall init_ch_module+0x0/0xae returned 0 after 396 usecs
>[    1.726839] calling  ahci_pci_driver_init+0x0/0x1b @ 1
>[    1.726905] ahci 0000:00:1f.2: version 3.0
>[    1.729025] ahci 0000:00:1f.2: irq 59 for MSI/MSI-X
>[    1.739833] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl SATA mode
>[    1.739838] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
>[    1.745433] scsi0 : ahci
>[    1.746603] scsi1 : ahci
>[    1.747609] scsi2 : ahci
>[    1.748491] ata1: SATA max UDMA/133 abar m2048@0xb251b000 port 0xb251b100 irq 59
>[    1.748496] ata2: SATA max UDMA/133 abar m2048@0xb251b000 port 0xb251b180 irq 59
>[    1.748498] ata3: DUMMY
>[    1.748593] calling  1_async_port_probe+0x0/0x50 @ 6
>[    1.748668] calling  2_async_port_probe+0x0/0x50 @ 28
>[    1.748979] calling  3_async_port_probe+0x0/0x50 @ 1000
>[    1.749083] async_waiting @ 1000
>[    1.749225] initcall ahci_pci_driver_init+0x0/0x1b returned 0 after 21847 usecs
>[    1.749229] calling  inic_pci_driver_init+0x0/0x1b @ 1
>[    1.749476] initcall inic_pci_driver_init+0x0/0x1b returned 0 after 236 usecs
>[    1.749479] calling  sil24_pci_driver_init+0x0/0x1b @ 1
>[    1.749716] initcall sil24_pci_driver_init+0x0/0x1b returned 0 after 226 usecs
>[    1.749719] calling  qs_ata_pci_driver_init+0x0/0x1b @ 1
>[    1.750001] initcall qs_ata_pci_driver_init+0x0/0x1b returned 0 after 270 usecs
>[    1.750004] calling  pdc_sata_pci_driver_init+0x0/0x1b @ 1
>[    1.750244] initcall pdc_sata_pci_driver_init+0x0/0x1b returned 0 after 230 usecs
>[    1.750247] calling  piix_init+0x0/0x29 @ 1
>[    1.750481] initcall piix_init+0x0/0x29 returned 0 after 224 usecs
>[    1.750484] calling  mv_init+0x0/0x43 @ 1
>[    1.750943] initcall mv_init+0x0/0x43 returned 0 after 443 usecs
>[    1.750946] calling  nv_pci_driver_init+0x0/0x1b @ 1
>[    1.751190] initcall nv_pci_driver_init+0x0/0x1b returned 0 after 233 usecs
>[    1.751193] calling  pdc_ata_pci_driver_init+0x0/0x1b @ 1
>[    1.751424] initcall pdc_ata_pci_driver_init+0x0/0x1b returned 0 after 222 usecs
>[    1.751427] calling  sil_pci_driver_init+0x0/0x1b @ 1
>[    1.751658] initcall sil_pci_driver_init+0x0/0x1b returned 0 after 221 usecs
>[    1.751661] calling  sis_pci_driver_init+0x0/0x1b @ 1
>[    1.751950] initcall sis_pci_driver_init+0x0/0x1b returned 0 after 277 usecs
>[    1.751954] calling  k2_sata_pci_driver_init+0x0/0x1b @ 1
>[    1.752223] initcall k2_sata_pci_driver_init+0x0/0x1b returned 0 after 259 usecs
>[    1.752226] calling  uli_pci_driver_init+0x0/0x1b @ 1
>[    1.752460] initcall uli_pci_driver_init+0x0/0x1b returned 0 after 224 usecs
>[    1.752463] calling  svia_pci_driver_init+0x0/0x1b @ 1
>[    1.752697] initcall svia_pci_driver_init+0x0/0x1b returned 0 after 224 usecs
>[    1.752701] calling  vsc_sata_pci_driver_init+0x0/0x1b @ 1
>[    1.752984] initcall vsc_sata_pci_driver_init+0x0/0x1b returned 0 after 273 usecs
>[    1.752988] calling  ali_init+0x0/0x4a @ 1
>[    1.753236] initcall ali_init+0x0/0x4a returned 0 after 238 usecs
>[    1.753239] calling  amd_pci_driver_init+0x0/0x1b @ 1
>[    1.753472] initcall amd_pci_driver_init+0x0/0x1b returned 0 after 223 usecs
>[    1.753475] calling  artop_pci_driver_init+0x0/0x1b @ 1
>[    1.753712] initcall artop_pci_driver_init+0x0/0x1b returned 0 after 227 usecs
>[    1.753715] calling  atiixp_pci_driver_init+0x0/0x1b @ 1
>[    1.753993] initcall atiixp_pci_driver_init+0x0/0x1b returned 0 after 266 usecs
>[    1.753996] calling  atp867x_driver_init+0x0/0x1b @ 1
>[    1.754239] initcall atp867x_driver_init+0x0/0x1b returned 0 after 232 usecs
>[    1.754242] calling  cmd64x_pci_driver_init+0x0/0x1b @ 1
>[    1.754477] initcall cmd64x_pci_driver_init+0x0/0x1b returned 0 after 225 usecs
>[    1.754480] calling  cs5520_pci_driver_init+0x0/0x1b @ 1
>[    1.754711] initcall cs5520_pci_driver_init+0x0/0x1b returned 0 after 221 usecs
>[    1.754714] calling  cs5530_pci_driver_init+0x0/0x1b @ 1
>[    1.755063] initcall cs5530_pci_driver_init+0x0/0x1b returned 0 after 336 usecs
>[    1.755066] calling  cy82c693_pci_driver_init+0x0/0x1b @ 1
>[    1.755299] initcall cy82c693_pci_driver_init+0x0/0x1b returned 0 after 223 usecs
>[    1.755302] calling  efar_pci_driver_init+0x0/0x1b @ 1
>[    1.755594] initcall efar_pci_driver_init+0x0/0x1b returned 0 after 280 usecs
>[    1.755597] calling  hpt36x_pci_driver_init+0x0/0x1b @ 1
>[    1.755842] initcall hpt36x_pci_driver_init+0x0/0x1b returned 0 after 234 usecs
>[    1.755845] calling  hpt37x_pci_driver_init+0x0/0x1b @ 1
>[    1.756081] initcall hpt37x_pci_driver_init+0x0/0x1b returned 0 after 226 usecs
>[    1.756084] calling  hpt3x2n_pci_driver_init+0x0/0x1b @ 1
>[    1.756316] initcall hpt3x2n_pci_driver_init+0x0/0x1b returned 0 after 222 usecs
>[    1.756319] calling  hpt3x3_pci_driver_init+0x0/0x1b @ 1
>[    1.756558] initcall hpt3x3_pci_driver_init+0x0/0x1b returned 0 after 228 usecs
>[    1.756561] calling  it8213_pci_driver_init+0x0/0x1b @ 1
>[    1.756798] initcall it8213_pci_driver_init+0x0/0x1b returned 0 after 227 usecs
>[    1.756801] calling  it821x_pci_driver_init+0x0/0x1b @ 1
>[    1.757036] initcall it821x_pci_driver_init+0x0/0x1b returned 0 after 225 usecs
>[    1.757039] calling  jmicron_pci_driver_init+0x0/0x1b @ 1
>[    1.757280] initcall jmicron_pci_driver_init+0x0/0x1b returned 0 after 230 usecs
>[    1.757283] calling  marvell_pci_driver_init+0x0/0x1b @ 1
>[    1.757512] initcall marvell_pci_driver_init+0x0/0x1b returned 0 after 219 usecs
>[    1.757515] calling  netcell_pci_driver_init+0x0/0x1b @ 1
>[    1.757744] initcall netcell_pci_driver_init+0x0/0x1b returned 0 after 219 usecs
>[    1.757747] calling  ninja32_pci_driver_init+0x0/0x1b @ 1
>[    1.758093] initcall ninja32_pci_driver_init+0x0/0x1b returned 0 after 333 usecs
>[    1.758097] calling  ns87415_pci_driver_init+0x0/0x1b @ 1
>[    1.758330] initcall ns87415_pci_driver_init+0x0/0x1b returned 0 after 223 usecs
>[    1.758333] calling  oldpiix_pci_driver_init+0x0/0x1b @ 1
>[    1.758564] initcall oldpiix_pci_driver_init+0x0/0x1b returned 0 after 221 usecs
>[    1.758568] calling  optidma_pci_driver_init+0x0/0x1b @ 1
>[    1.758811] initcall optidma_pci_driver_init+0x0/0x1b returned 0 after 233 usecs
>[    1.758815] calling  pdc2027x_pci_driver_init+0x0/0x1b @ 1
>[    1.759051] initcall pdc2027x_pci_driver_init+0x0/0x1b returned 0 after 226 usecs
>[    1.759054] calling  pdc202xx_pci_driver_init+0x0/0x1b @ 1
>[    1.759285] initcall pdc202xx_pci_driver_init+0x0/0x1b returned 0 after 221 usecs
>[    1.759289] calling  serverworks_pci_driver_init+0x0/0x1b @ 1
>[    1.759523] initcall serverworks_pci_driver_init+0x0/0x1b returned 0 after 224 usecs
>[    1.759526] calling  sil680_pci_driver_init+0x0/0x1b @ 1
>[    1.759758] initcall sil680_pci_driver_init+0x0/0x1b returned 0 after 222 usecs
>[    1.759761] calling  sis_pci_driver_init+0x0/0x1b @ 1
>[    1.760045] initcall sis_pci_driver_init+0x0/0x1b returned 0 after 272 usecs
>[    1.760048] calling  triflex_pci_driver_init+0x0/0x1b @ 1
>[    1.760283] initcall triflex_pci_driver_init+0x0/0x1b returned 0 after 225 usecs
>[    1.760286] calling  via_pci_driver_init+0x0/0x1b @ 1
>[    1.760524] initcall via_pci_driver_init+0x0/0x1b returned 0 after 228 usecs
>[    1.760528] calling  sl82c105_pci_driver_init+0x0/0x1b @ 1
>[    1.760759] initcall sl82c105_pci_driver_init+0x0/0x1b returned 0 after 221 usecs
>[    1.760762] calling  cmd640_pci_driver_init+0x0/0x1b @ 1
>[    1.761111] initcall cmd640_pci_driver_init+0x0/0x1b returned 0 after 336 usecs
>[    1.761115] calling  mpiix_pci_driver_init+0x0/0x1b @ 1
>[    1.761361] initcall mpiix_pci_driver_init+0x0/0x1b returned 0 after 235 usecs
>[    1.761364] calling  ns87410_pci_driver_init+0x0/0x1b @ 1
>[    1.761594] initcall ns87410_pci_driver_init+0x0/0x1b returned 0 after 220 usecs
>[    1.761597] calling  opti_pci_driver_init+0x0/0x1b @ 1
>[    1.761843] initcall opti_pci_driver_init+0x0/0x1b returned 0 after 235 usecs
>[    1.761847] calling  pcmcia_driver_init+0x0/0x12 @ 1
>[    1.762038] initcall pcmcia_driver_init+0x0/0x12 returned 0 after 182 usecs
>[    1.762041] calling  pacpi_pci_driver_init+0x0/0x1b @ 1
>[    1.762278] initcall pacpi_pci_driver_init+0x0/0x1b returned 0 after 226 usecs
>[    1.762281] calling  ata_generic_pci_driver_init+0x0/0x1b @ 1
>[    1.762512] initcall ata_generic_pci_driver_init+0x0/0x1b returned 0 after 221 usecs
>[    1.762516] calling  net_olddevs_init+0x0/0x5b @ 1
>[    1.762523] initcall net_olddevs_init+0x0/0x5b returned 0 after 2 usecs
>[    1.762526] calling  b44_init+0x0/0x44 @ 1
>[    1.762953] initcall b44_init+0x0/0x44 returned 0 after 412 usecs
>[    1.762957] calling  bnx2_pci_driver_init+0x0/0x1b @ 1
>[    1.763232] initcall bnx2_pci_driver_init+0x0/0x1b returned 0 after 264 usecs
>[    1.763235] calling  cnic_init+0x0/0x87 @ 1
>[    1.763237] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.18 (Sept 01, 2013)
>[    1.763392] initcall cnic_init+0x0/0x87 returned 0 after 148 usecs
>[    1.763395] calling  bnx2x_init+0x0/0x9c @ 1
>[    1.763397] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
>[    1.763741] initcall bnx2x_init+0x0/0x9c returned 0 after 333 usecs
>[    1.763744] calling  tg3_driver_init+0x0/0x1b @ 1
>[    1.764041] initcall tg3_driver_init+0x0/0x1b returned 0 after 285 usecs
>[    1.764045] calling  e100_init_module+0x0/0x5d @ 1
>[    1.764048] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
>[    1.764049] e100: Copyright(c) 1999-2006 Intel Corporation
>[    1.764291] initcall e100_init_module+0x0/0x5d returned 0 after 235 usecs
>[    1.764294] calling  e1000_init_module+0x0/0x82 @ 1
>[    1.764297] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
>[    1.764298] e1000: Copyright (c) 1999-2006 Intel Corporation.
>[    1.764531] initcall e1000_init_module+0x0/0x82 returned 0 after 227 usecs
>[    1.764534] calling  e1000_init_module+0x0/0x3e @ 1
>[    1.764537] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
>[    1.764539] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
>[    1.764775] initcall e1000_init_module+0x0/0x3e returned 0 after 230 usecs
>[    1.764786] calling  igb_init_module+0x0/0x4c @ 1
>[    1.764789] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
>[    1.764791] igb: Copyright (c) 2007-2013 Intel Corporation.
>[    1.765029] initcall igb_init_module+0x0/0x4c returned 0 after 232 usecs
>[    1.765032] calling  zd1201_usb_init+0x0/0x1b @ 1
>[    1.765260] usbcore: registered new interface driver zd1201
>[    1.765265] initcall zd1201_usb_init+0x0/0x1b returned 0 after 222 usecs
>[    1.765268] calling  catc_driver_init+0x0/0x1b @ 1
>[    1.765448] usbcore: registered new interface driver catc
>[    1.765452] initcall catc_driver_init+0x0/0x1b returned 0 after 175 usecs
>[    1.765455] calling  kaweth_driver_init+0x0/0x1b @ 1
>[    1.765638] usbcore: registered new interface driver kaweth
>[    1.765642] initcall kaweth_driver_init+0x0/0x1b returned 0 after 178 usecs
>[    1.765645] calling  pegasus_init+0x0/0x16c @ 1
>[    1.765648] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
>[    1.765860] usbcore: registered new interface driver pegasus
>[    1.765864] initcall pegasus_init+0x0/0x16c returned 0 after 209 usecs
>[    1.765868] calling  rtl8150_driver_init+0x0/0x1b @ 1
>[    1.766048] usbcore: registered new interface driver rtl8150
>[    1.766052] initcall rtl8150_driver_init+0x0/0x1b returned 0 after 175 usecs
>[    1.766055] calling  asix_driver_init+0x0/0x1b @ 1
>[    1.766280] usbcore: registered new interface driver asix
>[    1.766285] initcall asix_driver_init+0x0/0x1b returned 0 after 220 usecs
>[    1.766288] calling  ax88179_178a_driver_init+0x0/0x1b @ 1
>[    1.766475] usbcore: registered new interface driver ax88179_178a
>[    1.766479] initcall ax88179_178a_driver_init+0x0/0x1b returned 0 after 182 usecs
>[    1.766482] calling  cdc_driver_init+0x0/0x1b @ 1
>[    1.766665] usbcore: registered new interface driver cdc_ether
>[    1.766669] initcall cdc_driver_init+0x0/0x1b returned 0 after 178 usecs
>[    1.766672] calling  r815x_driver_init+0x0/0x1b @ 1
>[    1.767153] usbcore: registered new interface driver r815x
>[    1.767157] initcall r815x_driver_init+0x0/0x1b returned 0 after 469 usecs
>[    1.767161] calling  dm9601_driver_init+0x0/0x1b @ 1
>[    1.767341] usbcore: registered new interface driver dm9601
>[    1.767345] initcall dm9601_driver_init+0x0/0x1b returned 0 after 176 usecs
>[    1.767348] calling  gl620a_driver_init+0x0/0x1b @ 1
>[    1.767527] usbcore: registered new interface driver gl620a
>[    1.767531] initcall gl620a_driver_init+0x0/0x1b returned 0 after 174 usecs
>[    1.767535] calling  net1080_driver_init+0x0/0x1b @ 1
>[    1.767716] usbcore: registered new interface driver net1080
>[    1.767721] initcall net1080_driver_init+0x0/0x1b returned 0 after 177 usecs
>[    1.767724] calling  plusb_driver_init+0x0/0x1b @ 1
>[    1.767923] usbcore: registered new interface driver plusb
>[    1.767928] initcall plusb_driver_init+0x0/0x1b returned 0 after 195 usecs
>[    1.767931] calling  rndis_driver_init+0x0/0x1b @ 1
>[    1.768152] usbcore: registered new interface driver rndis_host
>[    1.768157] initcall rndis_driver_init+0x0/0x1b returned 0 after 216 usecs
>[    1.768160] calling  cdc_subset_driver_init+0x0/0x1b @ 1
>[    1.768345] usbcore: registered new interface driver cdc_subset
>[    1.768349] initcall cdc_subset_driver_init+0x0/0x1b returned 0 after 180 usecs
>[    1.768352] calling  zaurus_driver_init+0x0/0x1b @ 1
>[    1.768532] usbcore: registered new interface driver zaurus
>[    1.768537] initcall zaurus_driver_init+0x0/0x1b returned 0 after 176 usecs
>[    1.768540] calling  mcs7830_driver_init+0x0/0x1b @ 1
>[    1.768729] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
>[    1.768734] initcall mcs7830_driver_init+0x0/0x1b returned 0 after 184 usecs
>[    1.768737] calling  usbnet_init+0x0/0x2b @ 1
>[    1.768746] initcall usbnet_init+0x0/0x2b returned 0 after 5 usecs
>[    1.768749] calling  cdc_ncm_driver_init+0x0/0x1b @ 1
>[    1.769033] usbcore: registered new interface driver cdc_ncm
>[    1.769038] initcall cdc_ncm_driver_init+0x0/0x1b returned 0 after 277 usecs
>[    1.769041] calling  uio_init+0x0/0xf3 @ 1
>[    1.769218] initcall uio_init+0x0/0xf3 returned 0 after 168 usecs
>[    1.769222] calling  cdrom_init+0x0/0x19 @ 1
>[    1.769246] initcall cdrom_init+0x0/0x19 returned 0 after 20 usecs
>[    1.769249] calling  nonstatic_sysfs_init+0x0/0x12 @ 1
>[    1.769256] initcall nonstatic_sysfs_init+0x0/0x12 returned 0 after 2 usecs
>[    1.769259] calling  yenta_cardbus_driver_init+0x0/0x1b @ 1
>[    1.769499] initcall yenta_cardbus_driver_init+0x0/0x1b returned 0 after 229 usecs
>[    1.769502] calling  mon_init+0x0/0x112 @ 1
>[    1.770179] initcall mon_init+0x0/0x112 returned 0 after 655 usecs
>[    1.770183] calling  ehci_hcd_init+0x0/0x5d @ 1
>[    1.770186] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>[    1.770190] initcall ehci_hcd_init+0x0/0x5d returned 0 after 2 usecs
>[    1.770193] calling  ehci_pci_init+0x0/0x69 @ 1
>[    1.770196] ehci-pci: EHCI PCI platform driver
>[    1.772200] ehci-pci 0000:00:1d.0: EHCI Host Controller
>[    1.773260] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
>[    1.773309] ehci-pci 0000:00:1d.0: debug port 2
>[    1.777299] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
>[    1.777447] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb251c000
>[    1.782899] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
>[    1.783522] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.783527] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.783530] usb usb1: Product: EHCI Host Controller
>[    1.783533] usb usb1: Manufacturer: Linux 3.13.0-rc3_suspend-improvements_afa1ab_20131217+ ehci_hcd
>[    1.783536] usb usb1: SerialNumber: 0000:00:1d.0
>[    1.785400] hub 1-0:1.0: USB hub found
>[    1.785524] hub 1-0:1.0: 2 ports detected
>[    1.788202] initcall ehci_pci_init+0x0/0x69 returned 0 after 17571 usecs
>[    1.788208] calling  isp116x_driver_init+0x0/0x14 @ 1
>[    1.788427] initcall isp116x_driver_init+0x0/0x14 returned 0 after 209 usecs
>[    1.788431] calling  ohci_hcd_mod_init+0x0/0x39 @ 1
>[    1.788434] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>[    1.788438] initcall ohci_hcd_mod_init+0x0/0x39 returned 0 after 2 usecs
>[    1.788441] calling  ohci_pci_init+0x0/0x69 @ 1
>[    1.788444] ohci-pci: OHCI PCI platform driver
>[    1.788651] initcall ohci_pci_init+0x0/0x69 returned 0 after 200 usecs
>[    1.788655] calling  uhci_hcd_init+0x0/0xca @ 1
>[    1.788658] uhci_hcd: USB Universal Host Controller Interface driver
>[    1.788965] initcall uhci_hcd_init+0x0/0xca returned 0 after 297 usecs
>[    1.788968] calling  xhci_hcd_init+0x0/0x14 @ 1
>[    1.790939] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.791526] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
>[    1.791779] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
>[    1.791943] xhci_hcd 0000:00:14.0: irq 60 for MSI/MSI-X
>[    1.792485] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
>[    1.792489] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.792491] usb usb2: Product: xHCI Host Controller
>[    1.792494] usb usb2: Manufacturer: Linux 3.13.0-rc3_suspend-improvements_afa1ab_20131217+ xhci_hcd
>[    1.792497] usb usb2: SerialNumber: 0000:00:14.0
>[    1.793955] hub 2-0:1.0: USB hub found
>[    1.794075] hub 2-0:1.0: 9 ports detected
>[    1.848192] xhci_hcd 0000:00:14.0: xHCI Host Controller
>[    1.848799] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
>[    1.849312] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
>[    1.849316] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>[    1.849319] usb usb3: Product: xHCI Host Controller
>[    1.849322] usb usb3: Manufacturer: Linux 3.13.0-rc3_suspend-improvements_afa1ab_20131217+ xhci_hcd
>[    1.849324] usb usb3: SerialNumber: 0000:00:14.0
>[    1.850948] hub 3-0:1.0: USB hub found
>[    1.851048] hub 3-0:1.0: 4 ports detected
>[    1.878659] initcall xhci_hcd_init+0x0/0x14 returned 0 after 87542 usecs
>[    1.878666] calling  usb_storage_driver_init+0x0/0x1b @ 1
>[    1.878984] usbcore: registered new interface driver usb-storage
>[    1.878991] initcall usb_storage_driver_init+0x0/0x1b returned 0 after 311 usecs
>[    1.878995] calling  i8042_init+0x0/0x3d5 @ 1
>[    1.879500] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2D] at 0x60,0x64 irq 1,12
>[    1.908005] serio: i8042 KBD port at 0x60,0x64 irq 1
>[    1.908075] serio: i8042 AUX port at 0x60,0x64 irq 12
>[    1.908778] initcall i8042_init+0x0/0x3d5 returned 0 after 29065 usecs
>[    1.908785] calling  serport_init+0x0/0x2f @ 1
>[    1.908794] initcall serport_init+0x0/0x2f returned 0 after 1 usecs
>[    1.908799] calling  mousedev_init+0x0/0x5c @ 1
>[    1.909507] mousedev: PS/2 mouse device common for all mice
>[    1.909514] initcall mousedev_init+0x0/0x5c returned 0 after 691 usecs
>[    1.909518] calling  evdev_init+0x0/0x12 @ 1
>[    1.909524] initcall evdev_init+0x0/0x12 returned 0 after 1 usecs
>[    1.909527] calling  atkbd_init+0x0/0x27 @ 1
>[    1.909753] initcall atkbd_init+0x0/0x27 returned 0 after 215 usecs
>[    1.909757] calling  psmouse_init+0x0/0x85 @ 1
>[    1.910436] initcall psmouse_init+0x0/0x85 returned 0 after 658 usecs
>[    1.910441] calling  cmos_init+0x0/0x6a @ 1
>[    1.910511] rtc_cmos 00:04: RTC can wake from S4
>[    1.911366] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>[    1.911427] rtc_cmos 00:04: alarms up to one month, 242 bytes nvram, hpet irqs
>[    1.911597] initcall cmos_init+0x0/0x6a returned 0 after 1122 usecs
>[    1.911601] calling  i2c_dev_init+0x0/0xcf @ 1
>[    1.911603] i2c /dev entries driver
>[    1.911785] initcall i2c_dev_init+0x0/0xcf returned 0 after 175 usecs
>[    1.911791] calling  efivars_sysfs_init+0x0/0x23f @ 1
>[    1.911796] initcall efivars_sysfs_init+0x0/0x23f returned -19 after 0 usecs
>[    1.911800] calling  hid_init+0x0/0x63 @ 1
>[    1.912270] hidraw: raw HID events driver (C) Jiri Kosina
>[    1.912298] initcall hid_init+0x0/0x63 returned 0 after 481 usecs
>[    1.912302] calling  hid_generic_init+0x0/0x1b @ 1
>[    1.912495] initcall hid_generic_init+0x0/0x1b returned 0 after 183 usecs
>[    1.912499] calling  a4_driver_init+0x0/0x1b @ 1
>[    1.912684] initcall a4_driver_init+0x0/0x1b returned 0 after 176 usecs
>[    1.912688] calling  apple_driver_init+0x0/0x1b @ 1
>[    1.912931] initcall apple_driver_init+0x0/0x1b returned 0 after 231 usecs
>[    1.912935] calling  belkin_driver_init+0x0/0x1b @ 1
>[    1.913153] initcall belkin_driver_init+0x0/0x1b returned 0 after 207 usecs
>[    1.913157] calling  ch_driver_init+0x0/0x1b @ 1
>[    1.913340] initcall ch_driver_init+0x0/0x1b returned 0 after 174 usecs
>[    1.913344] calling  ch_driver_init+0x0/0x1b @ 1
>[    1.913522] initcall ch_driver_init+0x0/0x1b returned 0 after 169 usecs
>[    1.913526] calling  cp_driver_init+0x0/0x1b @ 1
>[    1.913712] initcall cp_driver_init+0x0/0x1b returned 0 after 176 usecs
>[    1.913716] calling  ez_driver_init+0x0/0x1b @ 1
>[    1.913926] initcall ez_driver_init+0x0/0x1b returned 0 after 200 usecs
>[    1.913931] calling  gyration_driver_init+0x0/0x1b @ 1
>[    1.914110] initcall gyration_driver_init+0x0/0x1b returned 0 after 170 usecs
>[    1.914114] calling  ks_driver_init+0x0/0x1b @ 1
>[    1.914292] initcall ks_driver_init+0x0/0x1b returned 0 after 169 usecs
>[    1.914296] calling  lg_driver_init+0x0/0x1b @ 1
>[    1.914475] initcall lg_driver_init+0x0/0x1b returned 0 after 170 usecs
>[    1.914478] calling  ms_driver_init+0x0/0x1b @ 1
>[    1.914654] initcall ms_driver_init+0x0/0x1b returned 0 after 166 usecs
>[    1.914658] calling  mr_driver_init+0x0/0x1b @ 1
>[    1.914859] initcall mr_driver_init+0x0/0x1b returned 0 after 190 usecs
>[    1.914864] calling  ntrig_driver_init+0x0/0x1b @ 1
>[    1.915096] initcall ntrig_driver_init+0x0/0x1b returned 0 after 221 usecs
>[    1.915099] calling  pl_driver_init+0x0/0x1b @ 1
>[    1.915276] initcall pl_driver_init+0x0/0x1b returned 0 after 167 usecs
>[    1.915280] calling  pl_driver_init+0x0/0x1b @ 1
>[    1.915455] initcall pl_driver_init+0x0/0x1b returned 0 after 166 usecs
>[    1.915459] calling  samsung_driver_init+0x0/0x1b @ 1
>[    1.915635] initcall samsung_driver_init+0x0/0x1b returned 0 after 166 usecs
>[    1.915638] calling  sony_driver_init+0x0/0x1b @ 1
>[    1.915815] initcall sony_driver_init+0x0/0x1b returned 0 after 169 usecs
>[    1.915818] calling  sp_driver_init+0x0/0x1b @ 1
>[    1.916053] initcall sp_driver_init+0x0/0x1b returned 0 after 226 usecs
>[    1.916056] calling  ts_driver_init+0x0/0x1b @ 1
>[    1.916240] initcall ts_driver_init+0x0/0x1b returned 0 after 176 usecs
>[    1.916243] calling  hid_init+0x0/0x54 @ 1
>[    1.916476] usbcore: registered new interface driver usbhid
>[    1.916478] usbhid: USB HID core driver
>[    1.916481] initcall hid_init+0x0/0x54 returned 0 after 229 usecs
>[    1.916484] calling  sock_diag_init+0x0/0x12 @ 1
>[    1.916521] initcall sock_diag_init+0x0/0x12 returned 0 after 31 usecs
>[    1.916524] calling  flow_cache_init_global+0x0/0x182 @ 1
>[    1.917021] initcall flow_cache_init_global+0x0/0x182 returned 0 after 480 usecs
>[    1.917026] calling  blackhole_module_init+0x0/0x12 @ 1
>[    1.917031] initcall blackhole_module_init+0x0/0x12 returned 0 after 1 usecs
>[    1.917035] calling  sysctl_ipv4_init+0x0/0x80 @ 1
>[    1.917109] initcall sysctl_ipv4_init+0x0/0x80 returned 0 after 68 usecs
>[    1.917112] calling  ipv4_netfilter_init+0x0/0x12 @ 1
>[    1.917137] initcall ipv4_netfilter_init+0x0/0x12 returned 0 after 19 usecs
>[    1.917140] calling  cubictcp_register+0x0/0x59 @ 1
>[    1.917143] TCP: cubic registered
>[    1.917147] initcall cubictcp_register+0x0/0x59 returned 0 after 3 usecs
>[    1.917151] calling  xfrm_user_init+0x0/0x46 @ 1
>[    1.917153] Initializing XFRM netlink socket
>[    1.917193] initcall xfrm_user_init+0x0/0x46 returned 0 after 36 usecs
>[    1.917196] calling  packet_init+0x0/0x42 @ 1
>[    1.917200] NET: Registered protocol family 17
>[    1.917224] initcall packet_init+0x0/0x42 returned 0 after 22 usecs
>[    1.917227] calling  init_rpcsec_gss+0x0/0x68 @ 1
>[    1.917368] initcall init_rpcsec_gss+0x0/0x68 returned 0 after 132 usecs
>[    1.917372] calling  init_dns_resolver+0x0/0xe3 @ 1
>[    1.917394] Key type dns_resolver registered
>[    1.917399] initcall init_dns_resolver+0x0/0xe3 returned 0 after 22 usecs
>[    1.917402] calling  mcheck_init_device+0x0/0xfd @ 1
>[    1.919506] initcall mcheck_init_device+0x0/0xfd returned 0 after 2048 usecs
>[    1.919772] calling  mcheck_debugfs_init+0x0/0x3b @ 1
>[    1.919809] initcall mcheck_debugfs_init+0x0/0x3b returned 0 after 32 usecs
>[    1.919812] calling  severities_debugfs_init+0x0/0x3d @ 1
>[    1.919829] initcall severities_debugfs_init+0x0/0x3d returned 0 after 13 usecs
>[    1.919832] calling  threshold_init_device+0x0/0x45 @ 1
>[    1.919856] initcall threshold_init_device+0x0/0x45 returned 0 after 20 usecs
>[    1.919860] calling  hpet_insert_resource+0x0/0x24 @ 1
>[    1.919865] initcall hpet_insert_resource+0x0/0x24 returned 0 after 2 usecs
>[    1.919869] calling  update_mp_table+0x0/0x439 @ 1
>[    1.919874] initcall update_mp_table+0x0/0x439 returned 0 after 0 usecs
>[    1.919877] calling  lapic_insert_resource+0x0/0x3f @ 1
>[    1.919882] initcall lapic_insert_resource+0x0/0x3f returned 0 after 1 usecs
>[    1.919885] calling  io_apic_bug_finalize+0x0/0x1b @ 1
>[    1.919890] initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0 usecs
>[    1.919893] calling  print_ICs+0x0/0x430 @ 1
>[    1.919898] initcall print_ICs+0x0/0x430 returned 0 after 0 usecs
>[    1.919902] calling  check_early_ioremap_leak+0x0/0x50 @ 1
>[    1.919907] initcall check_early_ioremap_leak+0x0/0x50 returned 0 after 0 usecs
>[    1.919910] calling  pat_memtype_list_init+0x0/0x35 @ 1
>[    1.919929] initcall pat_memtype_list_init+0x0/0x35 returned 0 after 13 usecs
>[    1.919934] calling  init_oops_id+0x0/0x37 @ 1
>[    1.919943] initcall init_oops_id+0x0/0x37 returned 0 after 3 usecs
>[    1.919946] calling  sched_init_debug+0x0/0x24 @ 1
>[    1.919963] initcall sched_init_debug+0x0/0x24 returned 0 after 13 usecs
>[    1.919967] calling  pm_qos_power_init+0x0/0x63 @ 1
>[    1.921222] initcall pm_qos_power_init+0x0/0x63 returned 0 after 1220 usecs
>[    1.921226] calling  pm_debugfs_init+0x0/0x24 @ 1
>[    1.921254] initcall pm_debugfs_init+0x0/0x24 returned 0 after 22 usecs
>[    1.921257] calling  printk_late_init+0x0/0x3f @ 1
>[    1.921263] initcall printk_late_init+0x0/0x3f returned 0 after 2 usecs
>[    1.921267] calling  tk_debug_sleep_time_init+0x0/0x3c @ 1
>[    1.921285] initcall tk_debug_sleep_time_init+0x0/0x3c returned 0 after 13 usecs
>[    1.921290] calling  debugfs_kprobe_init+0x0/0x85 @ 1
>[    1.921334] initcall debugfs_kprobe_init+0x0/0x85 returned 0 after 39 usecs
>[    1.921338] calling  taskstats_init+0x0/0x6e @ 1
>[    1.921371] registered taskstats version 1
>[    1.921375] initcall taskstats_init+0x0/0x6e returned 0 after 31 usecs
>[    1.921379] calling  clear_boot_tracer+0x0/0x30 @ 1
>[    1.921384] initcall clear_boot_tracer+0x0/0x30 returned 0 after 0 usecs
>[    1.921388] calling  max_swapfiles_check+0x0/0x8 @ 1
>[    1.921392] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
>[    1.921396] calling  kmemleak_late_init+0x0/0x97 @ 1
>[    1.921554] kmemleak: Kernel memory leak detector initialized
>[    1.921559] initcall kmemleak_late_init+0x0/0x97 returned 0 after 155 usecs
>[    1.921564] calling  init_root_keyring+0x0/0xb @ 1
>[    1.921742] initcall init_root_keyring+0x0/0xb returned 0 after 168 usecs
>[    1.921745] calling  prandom_reseed+0x0/0x49 @ 1
>[    1.921801] initcall prandom_reseed+0x0/0x49 returned 0 after 51 usecs
>[    1.921804] calling  pci_resource_alignment_sysfs_init+0x0/0x22 @ 1
>[    1.921814] initcall pci_resource_alignment_sysfs_init+0x0/0x22 returned 0 after 6 usecs
>[    1.921817] calling  pci_sysfs_init+0x0/0x4b @ 1
>[    1.922900] kmemleak: Automatic memory scanning thread started
>[    1.925945] initcall pci_sysfs_init+0x0/0x4b returned 0 after 4023 usecs
>[    1.925951] calling  deferred_probe_initcall+0x0/0x72 @ 1
>[    1.926214] initcall deferred_probe_initcall+0x0/0x72 returned 0 after 251 usecs
>[    1.926219] calling  late_resume_init+0x0/0xef @ 1
>[    1.926222]   Magic number: 9:506:679
>[    1.926278] initcall late_resume_init+0x0/0xef returned 0 after 53 usecs
>[    1.926282] calling  firmware_memmap_init+0x0/0x33 @ 1
>[    1.926810] initcall firmware_memmap_init+0x0/0x33 returned 0 after 510 usecs
>[    1.926813] calling  pci_mmcfg_late_insert_resources+0x0/0x4b @ 1
>[    1.926819] initcall pci_mmcfg_late_insert_resources+0x0/0x4b returned 0 after 2 usecs
>[    1.926823] calling  tcp_congestion_default+0x0/0x12 @ 1
>[    1.926828] initcall tcp_congestion_default+0x0/0x12 returned 0 after 1 usecs
>[    1.926832] calling  software_resume+0x0/0x28d @ 1
>[    1.926866] PM: Hibernation image not present or could not be loaded.
>[    1.926874] initcall software_resume+0x0/0x28d returned -2 after 35 usecs
>[    1.927278] async_waiting @ 1
>[    1.929070] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
>[    2.053963] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    2.054027] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[    2.056432] ata2.00: ATA-9: WDC WD5000LPCX-24C6HT0, 01.01A01, max UDMA/133
>[    2.056440] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
>[    2.058153] ata1.00: ATA-8: LITEONIT LSS-16L6G, DS46201, max UDMA/133
>[    2.058158] ata1.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
>[    2.061773] ata2.00: configured for UDMA/133
>[    2.061795] ata1.00: configured for UDMA/133
>[    2.061811] async_waiting @ 6
>[    2.061815] async_continuing @ 6 after 1 usec
>[    2.061819] async_waiting @ 28
>[    2.063062] scsi 0:0:0:0: Direct-Access     ATA      LITEONIT LSS-16L DS46 PQ: 0 ANSI: 5
>[    2.065010] calling  4_sd_probe_async+0x0/0x1d5 @ 1001
>[    2.065296] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
>[    2.065928] sd 0:0:0:0: [sda] Write Protect is off
>[    2.065932] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[    2.066124] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.068455] sd 0:0:0:0: Attached scsi generic sg0 type 0
>[    2.069717] initcall 1_async_port_probe+0x0/0x50 returned 0 after 313452 usecs
>[    2.069787] async_continuing @ 28 after 7771 usec
>[    2.070571] scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000LPCX-2 01.0 PQ: 0 ANSI: 5
>[    2.070598]  sda: sda1 sda2
>[    2.072412] calling  5_sd_probe_async+0x0/0x1d5 @ 1002
>[    2.072703] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
>[    2.072709] sd 1:0:0:0: [sdb] 4096-byte physical blocks
>[    2.073217] sd 1:0:0:0: [sdb] Write Protect is off
>[    2.073222] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>[    2.073404] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[    2.074771] sd 1:0:0:0: Attached scsi generic sg1 type 0
>[    2.075656] initcall 2_async_port_probe+0x0/0x50 returned 0 after 319177 usecs
>[    2.075727] async_continuing @ 1000 after 318848 usec
>[    2.075734] initcall 3_async_port_probe+0x0/0x50 returned 0 after 318954 usecs
>[    2.077203] sd 0:0:0:0: [sda] Attached SCSI disk
>[    2.077213] initcall 4_sd_probe_async+0x0/0x1d5 returned 0 after 11901 usecs
>[    2.110098] usb 1-1: new high-speed USB device number 2 using ehci-pci
>[    2.134603]  sdb: sdb1
>[    2.137523] sd 1:0:0:0: [sdb] Attached SCSI disk
>[    2.137535] initcall 5_sd_probe_async+0x0/0x1d5 returned 0 after 63557 usecs
>[    2.137560] async_continuing @ 1 after 205263 usec
>[    2.139039] Freeing unused kernel memory: 1312K (ffffffff820f3000 - ffffffff8223b000)
>[    2.139042] Write protecting the kernel read-only data: 16384k
>[    2.145330] Freeing unused kernel memory: 2028K (ffff880001805000 - ffff880001a00000)
>[    2.149227] Freeing unused kernel memory: 1468K (ffff880001e91000 - ffff880002000000)
>[    2.163063] systemd[1]: systemd 204 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
>[    2.163927] systemd[1]: Running in initial RAM disk.
>[    2.165175] systemd[1]: Failed to insert module 'ipv6'
>[    2.165442] systemd[1]: Set hostname to <x-hswu22>.
>[    2.169418] random: systemd urandom read with 32 bits of entropy available
>[    2.185348] systemd[1]: Expecting device dev-disk-by\x2duuid-0b9b45e5\x2d5f7b\x2d41b3\x2d853f\x2d14bf05023f57.device...
>[    2.185410] systemd[1]: Expecting device dev-disk-by\x2duuid-6a28c748\x2d80f9\x2d48ad\x2d8ff8\x2dba93ce869566.device...
>[    2.185457] systemd[1]: Starting Timers.
>[    2.185494] systemd[1]: Reached target Timers.
>[    2.185664] systemd[1]: Starting udev Kernel Socket.
>[    2.185790] systemd[1]: Listening on udev Kernel Socket.
>[    2.185913] systemd[1]: Starting udev Control Socket.
>[    2.186103] systemd[1]: Listening on udev Control Socket.
>[    2.186122] systemd[1]: Starting Journal Socket.
>[    2.186461] systemd[1]: Listening on Journal Socket.
>[    2.187161] systemd[1]: Started dracut cmdline hook.
>[    2.187930] systemd[1]: Starting dracut pre-udev hook...
>[    2.192169] systemd[1]: Started Load Kernel Modules.
>[    2.192195] systemd[1]: Starting Sockets.
>[    2.192235] systemd[1]: Reached target Sockets.
>[    2.192270] systemd[1]: Starting Setup Virtual Console...
>[    2.195204] systemd[1]: Starting Journal Service...
>[    2.199826] systemd[1]: Started Journal Service.
>[    2.200525] systemd[1]: Starting Swap.
>[    2.200591] systemd[1]: Reached target Swap.
>[    2.200619] systemd[1]: Starting Local File Systems.
>[    2.200668] systemd[1]: Reached target Local File Systems.
>[    2.224598] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
>[    2.224607] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    2.227053] hub 1-1:1.0: USB hub found
>[    2.227203] hub 1-1:1.0: 8 ports detected
>[    2.276640] systemd-udevd[1204]: starting version 204
>[    2.402188] usb 2-4: new high-speed USB device number 2 using xhci_hcd
>[    2.428730] usb 2-4: New USB device found, idVendor=0b95, idProduct=772b
>[    2.428736] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[    2.428739] usb 2-4: Product: AX88772B
>[    2.428741] usb 2-4: Manufacturer: ASIX Elec. Corp.
>[    2.428744] usb 2-4: SerialNumber: 000159
>[    2.513205] calling  acpi_button_driver_init+0x0/0x12 [button] @ 1221
>[    2.514310] tsc: Refined TSC clocksource calibration: 1696.073 MHz
>[    2.514483] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
>[    2.519665] calling  acpi_video_init+0x0/0x8a [video] @ 1222
>[    2.519691] initcall acpi_video_init+0x0/0x8a [video] returned 0 after 17 usecs
>[    2.533022] ACPI: Lid Switch [LID0]
>[    2.534989] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>[    2.537565] ACPI: Power Button [PWRB]
>[    2.539068] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
>[    2.540047] ACPI: Power Button [PWRF]
>[    2.540487] initcall acpi_button_driver_init+0x0/0x12 [button] returned 0 after 26617 usecs
>[    2.585619] calling  acpi_wmi_init+0x0/0x77 [wmi] @ 1221
>[    2.590500] calling  drm_core_init+0x0/0x10e [drm] @ 1218
>[    2.590866] [drm] Initialized drm 1.1.0 20060810
>[    2.590885] initcall drm_core_init+0x0/0x10e [drm] returned 0 after 354 usecs
>[    2.591149] wmi: Mapper loaded
>[    2.591161] initcall acpi_wmi_init+0x0/0x77 [wmi] returned 0 after 5397 usecs
>[    2.605028] calling  i915_init+0x0/0x6c [i915] @ 1218
>[    2.641360] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0a16 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
>[    2.641695] [drm:intel_detect_pch], Found LynxPoint LP PCH
>[    2.642084] [drm] Memory usable by graphics device = 2048M
>[    2.642088] [drm:i915_gem_gtt_init], GMADR size = 256M
>[    2.642091] [drm:i915_gem_gtt_init], GTT stolen size = 64M
>[    2.727087] [drm:intel_opregion_setup], graphic opregion physical addr: 0x90fb1018
>[    2.727157] [drm:intel_opregion_setup], Public ACPI methods supported
>[    2.727161] [drm:intel_opregion_setup], SWSCI supported
>[    2.738244] [drm:swsci_setup], SWSCI GBDA callbacks 00000cb3, SBCB callbacks 00300483
>[    2.738251] [drm:intel_opregion_setup], ASLE supported
>[    2.739906] i915 0000:00:02.0: irq 61 for MSI/MSI-X
>[    2.740058] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>[    2.740061] [drm] Driver supports precise vblank timestamp query.
>[    2.740067] [drm:init_vbt_defaults], Set default to SSC at 120000 kHz
>[    2.740073] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT HASWELL        d
>[    2.740079] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
>[    2.740083] [drm:parse_general_definitions], crt_ddc_bus_pin: 0
>[    2.740102] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
>[    2.740110] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 75600 1366 1404 1426 1592 768 771 777 790 0x8 0xa
>[    2.740114] [drm:parse_lfp_panel_data], VBT initial LVDS value 300300
>[    2.740120] [drm:parse_lfp_backlight], VBT backlight PWM modulation frequency 220 Hz, active high, min brightness 0, level 255
>[    2.740138] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
>[    2.740145] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
>[    2.740149] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
>[    2.740167] [drm:parse_mipi], No MIPI BDB found
>[    2.740172] [drm:parse_ddi_port], Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
>[    2.740177] [drm:parse_ddi_port], VBT HDMI level shift for port A: 0
>[    2.740182] [drm:parse_ddi_port], Port C VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
>[    2.740208] [drm:parse_ddi_port], VBT HDMI level shift for port C: 6
>[    2.741660] asix 2-4:1.0 eth0: register 'asix' at usb-0000:00:14.0-4, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:92:49
>[    2.742066] [drm:intel_dsm_pci_probe], no _DSM method for intel device
>[    2.742149] [drm:i915_gem_init_stolen], found 67108864 bytes of stolen memory at 9ba00000
>[    2.742745] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>[    2.743127] [drm:intel_print_wm_latency], Primary WM0 latency 20 (2.0 usec)
>[    2.743133] [drm:intel_print_wm_latency], Primary WM1 latency 4 (2.0 usec)
>[    2.743137] [drm:intel_print_wm_latency], Primary WM2 latency 36 (18.0 usec)
>[    2.743141] [drm:intel_print_wm_latency], Primary WM3 latency 90 (45.0 usec)
>[    2.743146] [drm:intel_print_wm_latency], Primary WM4 latency 160 (80.0 usec)
>[    2.743150] [drm:intel_print_wm_latency], Sprite WM0 latency 20 (2.0 usec)
>[    2.743154] [drm:intel_print_wm_latency], Sprite WM1 latency 4 (2.0 usec)
>[    2.743158] [drm:intel_print_wm_latency], Sprite WM2 latency 36 (18.0 usec)
>[    2.743162] [drm:intel_print_wm_latency], Sprite WM3 latency 90 (45.0 usec)
>[    2.743167] [drm:intel_print_wm_latency], Sprite WM4 latency 160 (80.0 usec)
>[    2.743171] [drm:intel_print_wm_latency], Cursor WM0 latency 20 (2.0 usec)
>[    2.743175] [drm:intel_print_wm_latency], Cursor WM1 latency 4 (2.0 usec)
>[    2.743179] [drm:intel_print_wm_latency], Cursor WM2 latency 36 (18.0 usec)
>[    2.743183] [drm:intel_print_wm_latency], Cursor WM3 latency 90 (45.0 usec)
>[    2.743267] [drm:intel_print_wm_latency], Cursor WM4 latency 160 (80.0 usec)
>[    2.743272] [drm:intel_modeset_init], 3 display pipes available.
>[    2.743594] [drm:intel_ddi_pll_init], CDCLK running at 450000KHz
>[    2.743600] [drm:intel_shared_dpll_init], 0 shared PLLs initialized
>[    2.743951] [drm:intel_dp_init_connector], Adding eDP connector on port A
>[    2.748688] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
>[    2.748694] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
>[    2.748698] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 50, power cycle delay 600
>[    2.748700] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 1, off delay 200
>[    2.748703] [drm:intel_dp_i2c_init], i2c_init DPDDC-A
>[    2.748723] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
>[    2.748733] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[    2.749618] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
>[    2.749797] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
>[    2.751808] [drm:intel_dp_get_dpcd], DPCD: 11 0a 81 41 00 00 01 80 02 00 00 00 0f 07 00
>[    2.752005] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
>[    2.754880] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[    2.795105] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
>[    2.795182] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    2.796864] [drm:intel_panel_setup_backlight], backlight initialized, enabled, brightness 851/851, sysfs interface registered
>[    2.799158] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000]
>[    2.803651] [drm:init_status_page], render ring hws offset: 0x00000000
>[    2.805506] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
>[    2.808453] [drm:init_status_page], bsd ring hws offset: 0x00022000
>[    2.809011] [drm:init_status_page], blitter ring hws offset: 0x00043000
>[    2.809603] [drm:init_status_page], video enhancement ring hws offset: 0x00064000
>[    2.810173] [drm:create_default_context], Default HW context loaded
>[    2.810179] [drm:i915_gem_context_init], HW context support initialized
>[    2.810557] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
>[    2.810566] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
>[    2.810573] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
>[    2.810579] [drm:intel_ddi_get_crtc_pll], Pipe A connected to port A using clock 0x20000000
>[    2.810592] [drm:intel_modeset_readout_hw_state], [ENCODER:9:TMDS-9] hw state readout: enabled, pipe A
>[    2.810598] [drm:intel_modeset_readout_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A
>[    2.810605] [drm:intel_modeset_readout_hw_state], [CONNECTOR:10:eDP-1] hw state readout: enabled
>[    2.810611] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:HDMI-A-1] hw state readout: disabled
>[    2.810618] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
>[    2.810622] [drm:intel_dump_pipe_config], cpu_transcoder: P
>[    2.810626] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 0
>[    2.810631] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.810636] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 5284823, gmch_n: 8388608, link_m: 146800, link_n: 524288, tu: 64
>[    2.810640] [drm:intel_dump_pipe_config], requested mode:
>[    2.810646] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
>[    2.810650] [drm:intel_dump_pipe_config], adjusted mode:
>[    2.810656] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5
>[    2.810662] [drm:intel_dump_crtc_timings], crtc timings: 0 1366 1404 1426 1592 768 771 777 790, type: 0x0 flags: 0x5
>[    2.810665] [drm:intel_dump_pipe_config], port clock: 0
>[    2.810669] [drm:intel_dump_pipe_config], pipe src size: 720x400
>[    2.810674] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.810678] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x05560300, enabled
>[    2.810682] [drm:intel_dump_pipe_config], ips: 0
>[    2.810686] [drm:intel_dump_pipe_config], double wide: 0
>[    2.810692] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
>[    2.810696] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[    2.810700] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    2.810705] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.810709] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.810713] [drm:intel_dump_pipe_config], requested mode:
>[    2.810718] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.810722] [drm:intel_dump_pipe_config], adjusted mode:
>[    2.810727] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.810733] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.810736] [drm:intel_dump_pipe_config], port clock: 0
>[    2.810740] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[    2.810744] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.810749] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.810752] [drm:intel_dump_pipe_config], ips: 0
>[    2.810756] [drm:intel_dump_pipe_config], double wide: 0
>[    2.810762] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
>[    2.810765] [drm:intel_dump_pipe_config], cpu_transcoder: C
>[    2.810769] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[    2.810774] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.810778] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.810782] [drm:intel_dump_pipe_config], requested mode:
>[    2.810787] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.810791] [drm:intel_dump_pipe_config], adjusted mode:
>[    2.810796] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.810802] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[    2.810805] [drm:intel_dump_pipe_config], port clock: 0
>[    2.810809] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[    2.810813] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.810817] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.810821] [drm:intel_dump_pipe_config], ips: 0
>[    2.810824] [drm:intel_dump_pipe_config], double wide: 0
>[    2.810843] [drm:intel_connector_check_state], [CONNECTOR:10:eDP-1]
>[    2.810850] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
>[    2.810856] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
>[    2.810860] [drm:check_crtc_state], [CRTC:3]
>[    2.810885] [drm:check_crtc_state], [CRTC:5]
>[    2.810892] [drm:check_crtc_state], [CRTC:7]
>[    2.811046] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[    2.811053] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[    2.812656] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[    2.813165] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[    2.813263] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    2.813276] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[    2.813283] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
>[    2.813289] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
>[    2.813293] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
>[    2.814520] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    2.814528] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[    2.814534] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] disconnected
>[    2.814539] [drm:drm_setup_crtcs], 
>[    2.814585] [drm:drm_enable_connectors], connector 10 enabled? yes
>[    2.814589] [drm:drm_enable_connectors], connector 18 enabled? no
>[    2.814593] [drm:drm_target_preferred], looking for cmdline mode on connector 10
>[    2.814597] [drm:drm_target_preferred], looking for preferred mode on connector 10
>[    2.814601] [drm:drm_target_preferred], found mode 1366x768
>[    2.814605] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[    2.814628] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3
>[    2.814656] [drm:intelfb_create], no BIOS fb, allocating a new one
>[    2.814661] [drm:i915_gem_object_create_stolen], creating stolen object: size=408000
>[    2.814696] [drm:i915_pages_create_for_stolen], offset=0x0, size=4227072
>[    2.816256] [drm:intelfb_create], allocated 1366x768 fb: 0x000a1000, bo ffff880156578e00
>[    2.822401] fbcon: inteldrmfb (fb0) is primary device
>[    2.828607] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[    2.828650] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
>[    2.828652] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
>[    2.828656] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[    2.828659] [drm:drm_mode_debug_printmodeline], Modeline 19:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
>[    2.828661] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
>[    2.828664] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    2.828679] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[    2.828693] [drm:connected_sink_compute_bpp], [CONNECTOR:10:eDP-1] checking for sink bpp constrains
>[    2.828694] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
>[    2.828698] [drm:intel_dp_compute_config], DP link computation with max lane count 1 max bw 0a pixel clock 75600KHz
>[    2.828701] [drm:intel_dp_compute_config], DP link bw 0a lane count 1 clock 270000 bpp 18
>[    2.828702] [drm:intel_dp_compute_config], DP link bw required 136080 available 216000
>[    2.828705] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[    2.828707] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[    2.828708] [drm:intel_dump_pipe_config], cpu_transcoder: P
>[    2.828710] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[    2.828712] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[    2.828714] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 2642411, gmch_n: 4194304, link_m: 146800, link_n: 524288, tu: 64
>[    2.828715] [drm:intel_dump_pipe_config], requested mode:
>[    2.828719] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
>[    2.828720] [drm:intel_dump_pipe_config], adjusted mode:
>[    2.828722] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
>[    2.828725] [drm:intel_dump_crtc_timings], crtc timings: 75600 1366 1404 1426 1592 768 771 777 790, type: 0x48 flags: 0xa
>[    2.828726] [drm:intel_dump_pipe_config], port clock: 270000
>[    2.828728] [drm:intel_dump_pipe_config], pipe src size: 1366x768
>[    2.828730] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[    2.828731] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[    2.828733] [drm:intel_dump_pipe_config], ips: 1
>[    2.828734] [drm:intel_dump_pipe_config], double wide: 0
>[    2.828967] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[    2.828977] [drm:ironlake_edp_backlight_off], 
>[    2.840563] [drm:ironlake_edp_panel_off], Turn eDP power off
>[    2.895420] usb 2-5: new high-speed USB device number 3 using xhci_hcd
>[    2.920743] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
>[    2.937805] usb 2-5: New USB device found, idVendor=13d3, idProduct=5173
>[    2.937808] usb 2-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
>[    2.937810] usb 2-5: Product: Lenovo EasyCamera
>[    2.937811] usb 2-5: Manufacturer: Azurewave
>[    2.937813] usb 2-5: SerialNumber: NULL
>[    3.029410] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[    3.029417] [drm:ironlake_wait_panel_status], mask b0000000 value 00000000 status 80000008 control abcd0008
>[    3.084438] [drm:ironlake_wait_panel_status], Wait complete
>[    3.084477] [drm:intel_update_fbc], no output, disabling
>[    3.084499] [drm:hsw_set_power_well], Requesting to disable the power well
>[    3.084560] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 5504
>[    3.084569] [drm:intel_crtc_mode_set], [ENCODER:9:TMDS-9] set [MODE:0:1366x768]
>[    3.084571] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
>[    3.084589] [drm:ironlake_edp_panel_on], Turn eDP power on
>[    3.084592] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[    3.095505] usb 2-6: new full-speed USB device number 4 using xhci_hcd
>[    3.108166] usb 2-6: New USB device found, idVendor=8087, idProduct=07dc
>[    3.108169] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
>[    3.515042] Switched to clocksource tsc
>[    3.630674] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 08000001 control abcd0008
>[    3.685680] [drm:ironlake_wait_panel_status], Wait complete
>[    3.685687] [drm:ironlake_wait_panel_on], Wait for panel power on
>[    3.685693] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b
>[    3.894768] [drm:ironlake_wait_panel_status], Wait complete
>[    3.895998] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[    3.896511] [drm:intel_dp_start_link_train], clock recovery OK
>[    3.897329] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[    3.897893] [drm:ironlake_edp_backlight_on], 
>[    3.897900] [drm:intel_panel_enable_backlight], pipe A
>[    3.897907] [drm:intel_panel_actually_set_backlight], set backlight PWM = 851
>[    3.897916] [drm:intel_edp_psr_match_conditions], PSR disable by flag
>[    3.931710] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[    3.949726] [drm:intel_connector_check_state], [CONNECTOR:10:eDP-1]
>[    3.949733] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
>[    3.949737] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
>[    3.949740] [drm:check_crtc_state], [CRTC:3]
>[    3.949765] [drm:check_crtc_state], [CRTC:5]
>[    3.949770] [drm:check_crtc_state], [CRTC:7]
>[    3.949795] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[    3.949855] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    3.949859] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    3.949872] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    3.949924] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    3.949927] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    3.950148] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[    3.950207] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    3.950210] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    3.955982] Console: switching to colour frame buffer device 170x48
>[    3.955992] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[    3.956029] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    3.956031] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    3.961568] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
>[    3.961570] i915 0000:00:02.0: registered panic notifier
>[    4.012617] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>[    4.020316] [drm:asle_set_backlight], bclp = 0x800000ff
>[    4.020339] [drm:asle_set_backlight], updating opregion backlight 255/255
>[    4.020360] [drm:intel_panel_actually_set_backlight], set backlight PWM = 765
>[    4.023820] [drm:asle_set_backlight], bclp = 0x800000ff
>[    4.023827] [drm:asle_set_backlight], updating opregion backlight 255/255
>[    4.023832] [drm:intel_panel_actually_set_backlight], set backlight PWM = 765
>[    4.025999] acpi device:49: registered as cooling_device4
>[    4.028483] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
>[    4.030397] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
>[    4.030435] [drm:i915_gem_open], 
>[    4.030815] [drm:intel_crtc_cursor_set], cursor off
>[    4.030832] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[    4.030870] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    4.030876] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.030900] [drm:intel_crtc_cursor_set], cursor off
>[    4.030905] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[    4.030931] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    4.030936] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.030949] [drm:intel_crtc_cursor_set], cursor off
>[    4.030954] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    4.030983] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    4.030988] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.031075] [drm:i915_gem_open], 
>[    4.031170] [drm:intel_crtc_cursor_set], cursor off
>[    4.031176] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[    4.031203] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    4.031208] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.031220] [drm:intel_crtc_cursor_set], cursor off
>[    4.031225] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[    4.031249] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[    4.031254] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.031267] [drm:intel_crtc_cursor_set], cursor off
>[    4.031271] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[    4.031296] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[    4.031300] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.031379] [drm:i915_gem_open], 
>[    4.031655] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[2] ENCODERS[2]
>[    4.031684] [drm:drm_mode_getresources], CRTC[3] CONNECTORS[2] ENCODERS[2]
>[    4.031704] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[    4.031715] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[    4.031748] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[    4.031877] initcall i915_init+0x0/0x6c [i915] returned 0 after 1392780 usecs
>[    4.033556] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[    4.033780] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[    4.033866] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[    4.033883] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[    4.033890] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
>[    4.033900] [drm:drm_mode_getconnector], [CONNECTOR:10:?]
>[    4.040783] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[    4.040795] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
>[    4.040800] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
>[    4.041034] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    4.041042] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[    4.041047] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] disconnected
>[    4.041056] [drm:drm_mode_getconnector], [CONNECTOR:18:?]
>[    4.041062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
>[    4.041066] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
>[    4.041247] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[    4.041252] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[    4.041255] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] disconnected
>[    4.041467] [drm:drm_mode_addfb], [FB:21]
>[    4.097049] [drm:drm_mode_addfb], [FB:21]
>[    4.097166] [drm:drm_mode_setcrtc], [CRTC:3]
>[    4.097204] [drm:drm_mode_setcrtc], [CONNECTOR:10:eDP-1]
>[    4.097208] [drm:intel_crtc_set_config], [CRTC:3] [FB:21] #connectors=1 (x y) (0 0)
>[    4.097228] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
>[    4.097231] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.104238] [drm:ironlake_update_plane], Writing base 004A9000 00000000 0 0 5504
>[    4.120401] [drm:drm_mode_setcrtc], [CRTC:3]
>[    4.120423] [drm:drm_mode_setcrtc], [CONNECTOR:10:eDP-1]
>[    4.120428] [drm:intel_crtc_set_config], [CRTC:3] [FB:21] #connectors=1 (x y) (0 0)
>[    4.120449] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[    4.120452] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[    4.129151] random: nonblocking pool is initialized
>[    4.211897] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
>[    4.471158] systemd-journald[1181]: Received SIGTERM
>[    4.721375] [drm:intel_print_rc6_info], Haswell: only RC6 available
>[    4.721380] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[    5.668752] calling  inet6_init+0x0/0x2fb [ipv6] @ 1
>[    5.670954] NET: Registered protocol family 10
>[    5.673211] initcall inet6_init+0x0/0x2fb [ipv6] returned 0 after 4328 usecs
>[    5.753689] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
>[    5.753701] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[    6.103197] LVM: Logical Volume autoactivation enabled.
>[    6.103208] LVM: Activation generator successfully completed.
>[    7.131212] systemd-readahead[2061]: Failed to create fanotify object: Function not implemented
>[    7.132263] systemd-readahead[2060]: Bumped block_nr parameter of 8:16 to 20480. This is a temporary hack and should be removed one day.
>[    8.297981] calling  uinput_init+0x0/0x12 [uinput] @ 2849
>[    8.298454] initcall uinput_init+0x0/0x12 [uinput] returned 0 after 453 usecs
>[    8.992675] systemd-udevd[2859]: starting version 204
>[    9.367450] EXT4-fs (sdb1): re-mounted. Opts: (null)
>[    9.458820] calling  acpi_cpufreq_init+0x0/0x1ec [acpi_cpufreq] @ 2872
>[    9.484199] initcall acpi_cpufreq_init+0x0/0x1ec [acpi_cpufreq] returned 0 after 24759 usecs
>[    9.575779] calling  init_soundcore+0x0/0x9a [soundcore] @ 2870
>[    9.576959] initcall init_soundcore+0x0/0x9a [soundcore] returned 0 after 1138 usecs
>[    9.711853] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
>[    9.807659] calling  acpi_ac_init+0x0/0x35 [ac] @ 2862
>[    9.813533] ACPI: AC Adapter [ACAD] (on-line)
>[    9.814258] initcall acpi_ac_init+0x0/0x35 [ac] returned 0 after 6431 usecs
>[    9.815938] calling  acpi_battery_init+0x0/0x16 [battery] @ 2876
>[    9.815957] initcall acpi_battery_init+0x0/0x16 [battery] returned 0 after 10 usecs
>[    9.858641] calling  pcspkr_platform_driver_init+0x0/0x19 [pcspkr] @ 2871
>[    9.859306] input: PC Speaker as /devices/platform/pcspkr/input/input7
>[    9.860199] initcall pcspkr_platform_driver_init+0x0/0x19 [pcspkr] returned 0 after 1510 usecs
>[    9.863632] calling  i2c_i801_init+0x0/0xab [i2c_i801] @ 2875
>[    9.866392] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
>[    9.866404] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    9.866768] initcall i2c_i801_init+0x0/0xab [i2c_i801] returned 0 after 3049 usecs
>[    9.921916] ACPI: Battery Slot [BAT1] (battery present)
>[    9.943261] calling  lpc_ich_driver_init+0x0/0x20 [lpc_ich] @ 2868
>[    9.943826] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
>[    9.943837] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    9.943850] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
>[    9.943862] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
>[    9.943869] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    9.943877] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
>[    9.943889] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
>[    9.943900] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20131115/utaddress-251)
>[    9.943906] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[    9.943908] lpc_ich: Resource conflict(s) found affecting gpio_ich
>[    9.945271] initcall lpc_ich_driver_init+0x0/0x20 [lpc_ich] returned 0 after 1950 usecs
>[    9.973601] calling  iTCO_vendor_init_module+0x0/0x1c [iTCO_vendor_support] @ 2861
>[    9.973606] iTCO_vendor_support: vendor-support=0
>[    9.973610] initcall iTCO_vendor_init_module+0x0/0x1c [iTCO_vendor_support] returned 0 after 2 usecs
>[    9.984799] calling  iTCO_wdt_init_module+0x0/0x2e [iTCO_wdt] @ 2861
>[    9.984803] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
>[    9.984918] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
>[    9.987750] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>[    9.988050] initcall iTCO_wdt_init_module+0x0/0x2e [iTCO_wdt] returned 0 after 3164 usecs
>[   10.195875] calling  alsa_sound_init+0x0/0x9a [snd] @ 2863
>[   10.196229] initcall alsa_sound_init+0x0/0x9a [snd] returned 0 after 333 usecs
>[   10.250424] calling  videodev_init+0x0/0x86 [videodev] @ 2866
>[   10.250428] Linux video capture interface: v2.00
>[   10.250658] initcall videodev_init+0x0/0x86 [videodev] returned 0 after 216 usecs
>[   10.308834] Adding 2047996k swap on /dev/sda2.  Priority:-1 extents:1 across:2047996k SS
>[   10.321499] calling  alsa_timer_init+0x0/0x18a [snd_timer] @ 2870
>[   10.323336] initcall alsa_timer_init+0x0/0x18a [snd_timer] returned 0 after 1778 usecs
>[   10.698507] calling  snd_mem_init+0x0/0x2c [snd_page_alloc] @ 2863
>[   10.698738] initcall snd_mem_init+0x0/0x2c [snd_page_alloc] returned 0 after 55 usecs
>[   10.714700] calling  uvc_init+0x0/0x46 [uvcvideo] @ 2866
>[   10.715003] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (13d3:5173)
>[   10.720847] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input8
>[   10.722535] usbcore: registered new interface driver uvcvideo
>[   10.722541] USB Video Class driver (1.1.1)
>[   10.722554] initcall uvc_init+0x0/0x46 [uvcvideo] returned 0 after 7651 usecs
>[   11.125296] calling  alsa_pcm_init+0x0/0x6c [snd_pcm] @ 2947
>[   11.125447] initcall alsa_pcm_init+0x0/0x6c [snd_pcm] returned 0 after 129 usecs
>[   11.209561] calling  alsa_seq_device_init+0x0/0x5b [snd_seq_device] @ 2962
>[   11.209607] initcall alsa_seq_device_init+0x0/0x5b [snd_seq_device] returned 0 after 37 usecs
>[   11.477970] calling  alsa_seq_init+0x0/0x49 [snd_seq] @ 2961
>[   11.478989] initcall alsa_seq_init+0x0/0x49 [snd_seq] returned 0 after 982 usecs
>[   11.790017] calling  alsa_hwdep_init+0x0/0x64 [snd_hwdep] @ 2863
>[   11.790100] initcall alsa_hwdep_init+0x0/0x64 [snd_hwdep] returned 0 after 70 usecs
>[   11.803757] type=1305 audit(1387276785.774:2): audit_pid=2930 old=0 auid=4294967295 ses=4294967295 res=1
>[   12.200500] systemd-udevd[2861]: renamed network interface eth0 to enp0s20u4
>[   12.991236] calling  azx_driver_init+0x0/0x20 [snd_hda_intel] @ 2870
>[   12.993627] ALSA sound/pci/hda/hda_i915.c:58 HDA driver get symbol successfully from i915 module
>[   12.993657] [drm:hsw_set_power_well], Enabling power well
>[   12.993933] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
>[   12.997707] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
>[   13.439840] calling  patch_hdmi_init+0x0/0x12 [snd_hda_codec_hdmi] @ 3012
>[   13.439852] initcall patch_hdmi_init+0x0/0x12 [snd_hda_codec_hdmi] returned 0 after 1 usecs
>[   13.957048] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[   13.957081] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=1
>[   13.957084] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   13.957113] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 5504
>[   13.966919] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[   13.966947] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   13.966949] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   13.966957] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[   13.966981] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   13.966982] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   13.966994] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[   13.967018] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[   13.967019] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   13.967039] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[   13.967064] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[   13.967066] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   13.975546] [drm:intel_crtc_cursor_set], cursor off
>[   13.975552] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[   13.975578] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[   13.975581] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   13.975590] [drm:intel_crtc_cursor_set], cursor off
>[   13.975593] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[   13.975614] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[   13.975617] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   13.975624] [drm:intel_crtc_cursor_set], cursor off
>[   13.975627] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[   13.975648] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[   13.975650] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[   14.083904] calling  patch_realtek_init+0x0/0x12 [snd_hda_codec_realtek] @ 3015
>[   14.083912] initcall patch_realtek_init+0x0/0x12 [snd_hda_codec_realtek] returned 0 after 1 usecs
>[   14.084621] ALSA sound/pci/hda/patch_realtek.c:419 SKU: Nid=0x1d sku_cfg=0x40f41905
>[   14.084624] ALSA sound/pci/hda/patch_realtek.c:421 SKU: port_connectivity=0x1
>[   14.084626] ALSA sound/pci/hda/patch_realtek.c:422 SKU: enable_pcbeep=0x1
>[   14.084628] ALSA sound/pci/hda/patch_realtek.c:423 SKU: check_sum=0x00000004
>[   14.084630] ALSA sound/pci/hda/patch_realtek.c:424 SKU: customization=0x00000019
>[   14.084632] ALSA sound/pci/hda/patch_realtek.c:425 SKU: external_amp=0x0
>[   14.084634] ALSA sound/pci/hda/patch_realtek.c:426 SKU: platform_type=0x1
>[   14.084635] ALSA sound/pci/hda/patch_realtek.c:427 SKU: swap=0x0
>[   14.084637] ALSA sound/pci/hda/patch_realtek.c:428 SKU: override=0x1
>[   14.084902] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
>[   14.084904] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
>[   14.084906] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
>[   14.084907] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
>[   14.084908] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
>[   14.084911] ALSA sound/pci/hda/hda_auto_parser.c:410      Mic=0x19
>[   14.084913] ALSA sound/pci/hda/hda_auto_parser.c:410      Internal Mic=0x12
>[   14.084916] ALSA sound/pci/hda/patch_realtek.c:491 realtek: No valid SSID, checking pincfg 0x40f41905 for NID 0x1d
>[   14.084918] ALSA sound/pci/hda/patch_realtek.c:507 realtek: Enabling init ASM_ID=0x1905 CODEC_ID=10ec0283
>[   14.108344] initcall azx_driver_init+0x0/0x20 [snd_hda_intel] returned 0 after 1090452 usecs
>[   14.118101] systemd-logind[2996]: Watching system buttons on /dev/input/event3 (Power Button)
>[   14.118675] systemd-logind[2996]: Watching system buttons on /dev/input/event5 (Video Bus)
>[   14.119366] systemd-logind[2996]: Watching system buttons on /dev/input/event2 (Power Button)
>[   14.120063] systemd-logind[2996]: Watching system buttons on /dev/input/event1 (Lid Switch)
>[   27.000027] traps: alsactl[2973] general protection ip:3cda048c39 sp:7fff9f978860 error:0 in libc-2.17.so[3cda000000+1b5000]
>[   29.031350] IPv6: ADDRCONF(NETDEV_UP): enp0s20u4: link is not ready
>[   29.124995] asix 2-4:1.0 enp0s20u4: link down
>[   30.331061] calling  xt_init+0x0/0x156 [x_tables] @ 3138
>[   30.331100] initcall xt_init+0x0/0x156 [x_tables] returned 0 after 24 usecs
>[   30.341299] calling  ebtables_init+0x0/0x4a [ebtables] @ 3138
>[   30.341365] Ebtables v2.0 registered
>[   30.341371] initcall ebtables_init+0x0/0x4a [ebtables] returned 0 after 61 usecs
>[   30.347240] calling  ebtable_nat_init+0x0/0x3e [ebtable_nat] @ 3143
>[   30.347431] initcall ebtable_nat_init+0x0/0x3e [ebtable_nat] returned 0 after 175 usecs
>[   30.407025] calling  ip_tables_init+0x0/0x9e [ip_tables] @ 3148
>[   30.407087] ip_tables: (C) 2000-2006 Netfilter Core Team
>[   30.407093] initcall ip_tables_init+0x0/0x9e [ip_tables] returned 0 after 58 usecs
>[   30.437872] calling  iptable_filter_init+0x0/0x4c [iptable_filter] @ 3151
>[   30.438515] initcall iptable_filter_init+0x0/0x4c [iptable_filter] returned 0 after 616 usecs
>[   30.464104] calling  ip6_tables_init+0x0/0x9e [ip6_tables] @ 3156
>[   30.464167] ip6_tables: (C) 2000-2006 Netfilter Core Team
>[   30.464174] initcall ip6_tables_init+0x0/0x9e [ip6_tables] returned 0 after 60 usecs
>[   30.469062] calling  ip6table_filter_init+0x0/0x55 [ip6table_filter] @ 3159
>[   30.469277] initcall ip6table_filter_init+0x0/0x55 [ip6table_filter] returned 0 after 201 usecs
>[   34.375254] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20u4: link becomes ready
>[   34.376667] asix 2-4:1.0 enp0s20u4: link up, 100Mbps, full-duplex, lpa 0xC5E1
>[  134.460016] PM: Syncing filesystems ... done.
>[  134.463415] PM: Preparing system for mem sleep
>[  134.463952] Freezing user space processes ... (elapsed 0.001 seconds) done.
>[  134.465415] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
>[  134.466976] PM: Entering mem sleep
>[  134.467434] Suspending console(s) (use no_console_suspend to debug)
>[  134.468557] calling  input8+ @ 3210, parent: 2-5:1.0
>[  134.468573] call input8+ returned 0 after 12 usecs
>[  134.468591] calling  iTCO_wdt+ @ 3210, parent: 0000:00:1f.0
>[  134.468593] call iTCO_wdt+ returned 0 after 0 usecs
>[  134.468605] calling  input7+ @ 3210, parent: pcspkr
>[  134.468608] call input7+ returned 0 after 1 usecs
>[  134.468623] calling  input6+ @ 3210, parent: LNXVIDEO:00
>[  134.468626] call input6+ returned 0 after 1 usecs
>[  134.468634] calling  acpi_video0+ @ 3210, parent: 0000:00:02.0
>[  134.468698] call acpi_video0+ returned 0 after 60 usecs
>[  134.468974] calling  2-6+ @ 1001, parent: usb2
>[  134.468998] call 2-6+ returned 0 after 17 usecs
>[  134.469048] calling  2-5+ @ 1000, parent: usb2
>[  134.469051] call 2-5+ returned 0 after 0 usecs
>[  134.469058] calling  input2+ @ 3210, parent: serio1
>[  134.469063] call input2+ returned 0 after 2 usecs
>[  134.469079] calling  card0-HDMI-A-1+ @ 3210, parent: card0
>[  134.469082] call card0-HDMI-A-1+ returned 0 after 0 usecs
>[  134.469086] calling  intel_backlight+ @ 3210, parent: card0-eDP-1
>[  134.469090] call intel_backlight+ returned 0 after 1 usecs
>[  134.469098] calling  i2c-6+ @ 3210, parent: card0-eDP-1
>[  134.469100] call i2c-6+ returned 0 after 0 usecs
>[  134.469105] calling  card0-eDP-1+ @ 3210, parent: card0
>[  134.469107] call card0-eDP-1+ returned 0 after 0 usecs
>[  134.469133] calling  i2c-5+ @ 3210, parent: 0000:00:02.0
>[  134.469136] call i2c-5+ returned 0 after 0 usecs
>[  134.469145] calling  i2c-4+ @ 3210, parent: 0000:00:02.0
>[  134.469147] call i2c-4+ returned 0 after 0 usecs
>[  134.469155] calling  i2c-3+ @ 3210, parent: 0000:00:02.0
>[  134.469157] call i2c-3+ returned 0 after 0 usecs
>[  134.469165] calling  i2c-2+ @ 3210, parent: 0000:00:02.0
>[  134.469167] call i2c-2+ returned 0 after 0 usecs
>[  134.469175] calling  i2c-1+ @ 3210, parent: 0000:00:02.0
>[  134.469177] call i2c-1+ returned 0 after 0 usecs
>[  134.469185] calling  i2c-0+ @ 3210, parent: 0000:00:02.0
>[  134.469187] call i2c-0+ returned 0 after 0 usecs
>[  134.469192] calling  card0+ @ 3210, parent: 0000:00:02.0
>[  134.469194] call card0+ returned 0 after 0 usecs
>[  134.469198] calling  controlD64+ @ 3210, parent: 0000:00:02.0
>[  134.469200] call controlD64+ returned 0 after 0 usecs
>[  134.469218] calling  input5+ @ 3210, parent: LNXPWRBN:00
>[  134.469221] call input5+ returned 0 after 1 usecs
>[  134.469243] calling  input4+ @ 3210, parent: PNP0C0C:00
>[  134.469247] call input4+ returned 0 after 2 usecs
>[  134.469255] calling  input3+ @ 3210, parent: PNP0C0D:00
>[  134.469258] call input3+ returned 0 after 1 usecs
>[  134.469353] calling  2-4+ @ 1001, parent: usb2
>[  134.469622] calling  input0+ @ 3210, parent: serio0
>[  134.469628] call input0+ returned 0 after 2 usecs
>[  134.469677] calling  rtc0+ @ 3210, parent: 00:04
>[  134.469680] call rtc0+ returned 0 after 0 usecs
>[  134.469693] calling  serio1+ @ 3210, parent: i8042
>[  134.470405] call 2-4+ returned 0 after 1024 usecs
>[  134.470502] calling  1-1+ @ 1001, parent: usb1
>[  134.470641] calling  1:0:0:0+ @ 1000, parent: target1:0:0
>[  134.470685] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
>[  134.470697] calling  0:0:0:0+ @ 6, parent: target0:0:0
>[  134.470706] sd 0:0:0:0: [sda] Synchronizing SCSI cache
>[  134.471187] sd 1:0:0:0: [sdb] Stopping disk
>[  134.473170] sd 0:0:0:0: [sda] Stopping disk
>[  134.486136] call serio1+ returned 0 after 16047 usecs
>[  134.486143] calling  serio0+ @ 3210, parent: i8042
>[  134.486748] call serio0+ returned 0 after 588 usecs
>[  134.486754] calling  i8042+ @ 3210, parent: platform
>[  134.490713] call i8042+ returned 0 after 3862 usecs
>[  134.490840] calling  usb3+ @ 1162, parent: 0000:00:14.0
>[  134.491057] calling  usb2+ @ 1160, parent: 0000:00:14.0
>[  134.491151] call usb3+ returned 0 after 299 usecs
>[  134.491214] calling  serial8250+ @ 3210, parent: platform
>[  134.491218] call serial8250+ returned 0 after 1 usecs
>[  134.491229] calling  host2+ @ 1162, parent: ata3
>[  134.491233] call host2+ returned 0 after 0 usecs
>[  134.491386] calling  alarmtimer+ @ 3210, parent: platform
>[  134.491423] call usb2+ returned 0 after 353 usecs
>[  134.491438] calling  ata3+ @ 1160, parent: 0000:00:1f.2
>[  134.491513] call alarmtimer+ returned 0 after 121 usecs
>[  134.491529] calling  platform-framebuffer.0+ @ 3210, parent: platform
>[  134.491531] call platform-framebuffer.0+ returned 0 after 0 usecs
>[  134.491536] calling  pcspkr+ @ 3210, parent: platform
>[  134.491686] call pcspkr+ returned 0 after 144 usecs
>[  134.491696] call ata3+ returned 0 after 248 usecs
>[  134.491991] calling  00:08+ @ 3210, parent: pnp0
>[  134.491998] call 00:08+ returned 0 after 4 usecs
>[  134.492002] calling  00:07+ @ 3210, parent: pnp0
>[  134.492006] call 00:07+ returned 0 after 2 usecs
>[  134.492010] calling  00:06+ @ 3210, parent: pnp0
>[  134.492012] call 00:06+ returned 0 after 0 usecs
>[  134.492016] calling  00:05+ @ 3210, parent: pnp0
>[  134.492020] call 00:05+ returned 0 after 2 usecs
>[  134.492025] calling  00:04+ @ 3210, parent: pnp0
>[  134.492035] call 00:04+ returned 0 after 8 usecs
>[  134.492039] calling  00:03+ @ 3210, parent: pnp0
>[  134.492043] call 00:03+ returned 0 after 2 usecs
>[  134.492048] calling  00:02+ @ 3210, parent: pnp0
>[  134.492050] call 00:02+ returned 0 after 0 usecs
>[  134.492054] calling  00:01+ @ 3210, parent: pnp0
>[  134.492056] call 00:01+ returned 0 after 0 usecs
>[  134.492061] calling  00:00+ @ 3210, parent: pnp0
>[  134.492063] call 00:00+ returned 0 after 0 usecs
>[  134.492088] calling  VPC2004:00+ @ 3210, parent: platform
>[  134.492090] call VPC2004:00+ returned 0 after 0 usecs
>[  134.492113] calling  0000:02:00.0+ @ 3245, parent: 0000:00:1c.2
>[  134.492118] call 0000:02:00.0+ returned 0 after 1 usecs
>[  134.492131] calling  0000:00:1f.3+ @ 3245, parent: pci0000:00
>[  134.492176] calling  0000:00:1f.0+ @ 3243, parent: pci0000:00
>[  134.492180] call 0000:00:1f.0+ returned 0 after 0 usecs
>[  134.492280] calling  0000:00:1c.3+ @ 1160, parent: pci0000:00
>[  134.492354] call 0000:00:1c.3+ returned 0 after 70 usecs
>[  134.492367] calling  0000:00:1c.2+ @ 1160, parent: pci0000:00
>[  134.492377] call 0000:00:1c.2+ returned 0 after 8 usecs
>[  134.492387] calling  0000:00:1c.0+ @ 1160, parent: pci0000:00
>[  134.492396] call 0000:00:1c.0+ returned 0 after 7 usecs
>[  134.492404] calling  0000:00:1b.0+ @ 1160, parent: pci0000:00
>[  134.493203] calling  0000:00:16.0+ @ 3246, parent: pci0000:00
>[  134.493206] call 0000:00:16.0+ returned 0 after 0 usecs
>[  134.493220] calling  0000:00:14.0+ @ 3246, parent: pci0000:00
>[  134.493289] call 0000:00:14.0+ returned 0 after 65 usecs
>[  134.493300] calling  0000:00:03.0+ @ 3246, parent: pci0000:00
>[  134.493402] calling  0000:00:02.0+ @ 3247, parent: pci0000:00
>[  134.494413] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B
>[  134.494415] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe C
>[  134.494643] call 0000:00:1f.3+ returned 0 after 2449 usecs
>[  134.494660] calling  0000:00:00.0+ @ 3245, parent: pci0000:00
>[  134.494663] call 0000:00:00.0+ returned 0 after 0 usecs
>[  134.509329] call 1-1+ returned 0 after 37896 usecs
>[  134.509467] calling  usb1+ @ 3239, parent: 0000:00:1d.0
>[  134.510607] call usb1+ returned 0 after 1109 usecs
>[  134.510630] calling  0000:00:1d.0+ @ 3243, parent: pci0000:00
>[  134.513323] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
>[  134.513335] [drm:ironlake_edp_backlight_off], 
>[  134.517330] call 0000:00:03.0+ returned 0 after 23452 usecs
>[  134.519290] call 0000:00:1b.0+ returned 0 after 26242 usecs
>[  134.523150] call 0000:00:1d.0+ returned 0 after 12218 usecs
>[  134.540295] [drm:ironlake_edp_panel_off], Turn eDP power off
>[  134.714353] [drm:ironlake_wait_panel_off], Wait for panel power off time
>[  134.714360] [drm:ironlake_wait_panel_status], mask b0000000 value 00000000 status 80000008 control abcd0000
>[  134.769372] [drm:ironlake_wait_panel_status], Wait complete
>[  134.769389] [drm:intel_update_fbc], no output, disabling
>[  134.783384] call 0000:00:02.0+ returned 0 after 283063 usecs
>[  134.961018] call 0:0:0:0+ returned 0 after 478624 usecs
>[  134.961046] calling  target0:0:0+ @ 28, parent: host0
>[  134.961050] call target0:0:0+ returned 0 after 0 usecs
>[  134.961071] calling  host0+ @ 3240, parent: ata1
>[  134.961074] call host0+ returned 0 after 0 usecs
>[  134.961094] calling  ata1+ @ 3242, parent: 0000:00:1f.2
>[  134.961178] call ata1+ returned 0 after 79 usecs
>[  135.035754] call 1:0:0:0+ returned 0 after 551633 usecs
>[  135.035778] calling  target1:0:0+ @ 1002, parent: host1
>[  135.035782] call target1:0:0+ returned 0 after 0 usecs
>[  135.035800] calling  host1+ @ 1162, parent: ata2
>[  135.035803] call host1+ returned 0 after 0 usecs
>[  135.035822] calling  ata2+ @ 3241, parent: 0000:00:1f.2
>[  135.035886] call ata2+ returned 0 after 60 usecs
>[  135.035925] calling  0000:00:1f.2+ @ 3244, parent: pci0000:00
>[  135.046523] call 0000:00:1f.2+ returned 0 after 10341 usecs
>[  135.046589] PM: suspend of devices complete after 577.894 msecs
>[  135.047353] calling  ACPI0003:00+ @ 3210, parent: platform
>[  135.047370] call ACPI0003:00+ returned 0 after 13 usecs
>[  135.047698] PM: late suspend of devices complete after 1.103 msecs
>[  135.048271] calling  0000:02:00.0+ @ 3210, parent: 0000:00:1c.2
>[  135.048371] call 0000:02:00.0+ returned 0 after 96 usecs
>[  135.048377] calling  0000:00:1f.3+ @ 3210, parent: pci0000:00
>[  135.048403] call 0000:00:1f.3+ returned 0 after 24 usecs
>[  135.048406] calling  0000:00:1f.2+ @ 3210, parent: pci0000:00
>[  135.048408] call 0000:00:1f.2+ returned 0 after 0 usecs
>[  135.048410] calling  0000:00:1f.0+ @ 3210, parent: pci0000:00
>[  135.048453] call 0000:00:1f.0+ returned 0 after 40 usecs
>[  135.048456] calling  0000:00:1d.0+ @ 3210, parent: pci0000:00
>[  135.048902] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
>[  135.059522] call 0000:00:1d.0+ returned 0 after 10800 usecs
>[  135.059526] calling  0000:00:1c.3+ @ 3210, parent: pci0000:00
>[  135.059574] call 0000:00:1c.3+ returned 0 after 45 usecs
>[  135.059576] calling  0000:00:1c.2+ @ 3210, parent: pci0000:00
>[  135.059623] call 0000:00:1c.2+ returned 0 after 44 usecs
>[  135.059626] calling  0000:00:1c.0+ @ 3210, parent: pci0000:00
>[  135.059673] call 0000:00:1c.0+ returned 0 after 44 usecs
>[  135.059676] calling  0000:00:1b.0+ @ 3210, parent: pci0000:00
>[  135.059678] call 0000:00:1b.0+ returned 0 after 0 usecs
>[  135.059680] calling  0000:00:16.0+ @ 3210, parent: pci0000:00
>[  135.059718] call 0000:00:16.0+ returned 0 after 35 usecs
>[  135.059720] calling  0000:00:14.0+ @ 3210, parent: pci0000:00
>[  135.059858] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
>[  135.070510] call 0000:00:14.0+ returned 0 after 10530 usecs
>[  135.070513] calling  0000:00:03.0+ @ 3210, parent: pci0000:00
>[  135.070515] call 0000:00:03.0+ returned 0 after 0 usecs
>[  135.070517] calling  0000:00:02.0+ @ 3210, parent: pci0000:00
>[  135.070519] call 0000:00:02.0+ returned 0 after 0 usecs
>[  135.070521] calling  0000:00:00.0+ @ 3210, parent: pci0000:00
>[  135.070545] call 0000:00:00.0+ returned 0 after 22 usecs
>[  135.070716] PM: noirq suspend of devices complete after 23.006 msecs
>[  135.071086] ACPI: Preparing to enter system sleep state S3
>[  135.075177] PM: Saving platform NVS memory
>[  135.080186] Disabling non-boot CPUs ...
>[  135.084601] smpboot: CPU 1 is now offline
>[  135.091531] smpboot: CPU 2 is now offline
>[  135.094184] Broke affinity for irq 23
>[  135.094192] Broke affinity for irq 60
>[  135.095234] smpboot: CPU 3 is now offline
>[  135.096368] PM: Calling mce_syscore_suspend+0x0/0x10
>[  135.096376] PM: Calling acpi_processor_suspend+0x0/0x1e
>[  135.096380] PM: Calling timekeeping_suspend+0x0/0x17d
>[  135.096441] PM: Calling save_ioapic_entries+0x0/0x6a
>[  135.096579] PM: Calling i8259A_suspend+0x0/0x28
>[  135.096585] PM: Calling fw_suspend+0x0/0x17
>[  135.096589] PM: Calling cpufreq_bp_suspend+0x0/0x67
>[  135.096597] PM: Calling lapic_suspend+0x0/0x18a
>[  135.097904] ACPI: Low-level resume complete
>[  135.098068] PM: Restoring platform NVS memory
>[  135.098235] PM: Calling lapic_resume+0x0/0x22f
>[  135.098277] PM: Calling cpufreq_bp_resume+0x0/0x6b
>[  135.098504] PM: Calling irqrouter_resume+0x0/0x3f
>[  135.098507] PM: Calling i8259A_resume+0x0/0x2d
>[  135.098666] PM: Calling i8237A_resume+0x0/0x8c
>[  135.098854] PM: Calling ioapic_resume+0x0/0x7c
>[  135.098914] PM: Calling irq_pm_syscore_resume+0x0/0x15
>[  135.098928] PM: Calling timekeeping_resume+0x0/0x193
>[  135.099174] PM: Calling acpi_processor_resume+0x0/0x2f
>[  135.099181] PM: Calling mce_syscore_resume+0x0/0x25
>[  135.099488] Enabling non-boot CPUs ...
>[  135.099711] x86: Booting SMP configuration:
>[  135.099712] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[  135.119421] CPU1 is up
>[  135.119571] smpboot: Booting Node 0 Processor 2 APIC 0x2
>[  135.138456] CPU2 is up
>[  135.138611] smpboot: Booting Node 0 Processor 3 APIC 0x3
>[  135.157994] CPU3 is up
>[  135.164145] ACPI: Waking up from system sleep state S3
>[  135.199457] calling  0000:00:00.0+ @ 3210, parent: pci0000:00
>[  135.199485] call 0000:00:00.0+ returned 0 after 25 usecs
>[  135.199488] calling  0000:00:02.0+ @ 3210, parent: pci0000:00
>[  135.210157] call 0000:00:02.0+ returned 0 after 10412 usecs
>[  135.210160] calling  0000:00:03.0+ @ 3210, parent: pci0000:00
>[  135.221149] call 0000:00:03.0+ returned 0 after 10725 usecs
>[  135.221151] calling  0000:00:14.0+ @ 3210, parent: pci0000:00
>[  135.232324] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
>[  135.232357] call 0000:00:14.0+ returned 0 after 10937 usecs
>[  135.232360] calling  0000:00:16.0+ @ 3210, parent: pci0000:00
>[  135.232440] call 0000:00:16.0+ returned 0 after 76 usecs
>[  135.232442] calling  0000:00:1b.0+ @ 3210, parent: pci0000:00
>[  135.243208] call 0000:00:1b.0+ returned 0 after 10507 usecs
>[  135.243211] calling  0000:00:1c.0+ @ 3210, parent: pci0000:00
>[  135.243380] call 0000:00:1c.0+ returned 0 after 163 usecs
>[  135.243382] calling  0000:00:1c.2+ @ 3210, parent: pci0000:00
>[  135.243532] call 0000:00:1c.2+ returned 0 after 144 usecs
>[  135.243534] calling  0000:00:1c.3+ @ 3210, parent: pci0000:00
>[  135.243673] call 0000:00:1c.3+ returned 0 after 133 usecs
>[  135.243675] calling  0000:00:1d.0+ @ 3210, parent: pci0000:00
>[  135.254516] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
>[  135.254528] call 0000:00:1d.0+ returned 0 after 10592 usecs
>[  135.254530] calling  0000:00:1f.0+ @ 3210, parent: pci0000:00
>[  135.254602] call 0000:00:1f.0+ returned 0 after 68 usecs
>[  135.254604] calling  0000:00:1f.2+ @ 3210, parent: pci0000:00
>[  135.265234] call 0000:00:1f.2+ returned 0 after 10374 usecs
>[  135.265236] calling  0000:00:1f.3+ @ 3210, parent: pci0000:00
>[  135.265289] call 0000:00:1f.3+ returned 0 after 50 usecs
>[  135.265292] calling  0000:02:00.0+ @ 3210, parent: 0000:00:1c.2
>[  135.265407] call 0000:02:00.0+ returned 0 after 110 usecs
>[  135.265759] PM: noirq resume of devices complete after 66.400 msecs
>[  135.265990] calling  ACPI0003:00+ @ 3210, parent: platform
>[  135.265994] call ACPI0003:00+ returned 0 after 2 usecs
>[  135.266476] PM: early resume of devices complete after 0.672 msecs
>[  135.267158] calling  0000:00:02.0+ @ 3245, parent: pci0000:00
>[  135.267163] calling  0000:00:03.0+ @ 3241, parent: pci0000:00
>[  135.267175] calling  0000:00:14.0+ @ 1162, parent: pci0000:00
>[  135.267481] call 0000:00:14.0+ returned 0 after 295 usecs
>[  135.267496] calling  0000:00:16.0+ @ 1162, parent: pci0000:00
>[  135.267500] call 0000:00:16.0+ returned 0 after 1 usecs
>[  135.267509] calling  0000:00:1b.0+ @ 1162, parent: pci0000:00
>[  135.267576] calling  0000:00:1c.0+ @ 1002, parent: pci0000:00
>[  135.267587] calling  0000:00:1c.2+ @ 1000, parent: pci0000:00
>[  135.267592] call 0000:00:1c.0+ returned 0 after 12 usecs
>[  135.267602] calling  0000:00:1c.3+ @ 1002, parent: pci0000:00
>[  135.267604] call 0000:00:1c.2+ returned 0 after 13 usecs
>[  135.267616] call 0000:00:1c.3+ returned 0 after 10 usecs
>[  135.267618] calling  0000:00:1d.0+ @ 1000, parent: pci0000:00
>[  135.267627] calling  0000:00:1f.0+ @ 1002, parent: pci0000:00
>[  135.267630] call 0000:00:1f.0+ returned 0 after 0 usecs
>[  135.267639] calling  0000:00:1f.2+ @ 1002, parent: pci0000:00
>[  135.267682] calling  0000:00:1f.3+ @ 3242, parent: pci0000:00
>[  135.267690] calling  0000:02:00.0+ @ 3240, parent: 0000:00:1c.2
>[  135.267694] call 0000:02:00.0+ returned 0 after 1 usecs
>[  135.267815] calling  PNP0C0A:00+ @ 3210, parent: device:00
>[  135.268143] calling  0000:00:00.0+ @ 3244, parent: pci0000:00
>[  135.268148] call 0000:00:00.0+ returned 0 after 1 usecs
>[  135.268597] calling  usb2+ @ 3253, parent: 0000:00:14.0
>[  135.270043] [drm:intel_opregion_setup], graphic opregion physical addr: 0x90fb1018
>[  135.270092] [drm:intel_opregion_setup], Public ACPI methods supported
>[  135.270093] [drm:intel_opregion_setup], SWSCI supported
>[  135.270338] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X
>[  135.270584] calling  usb3+ @ 3266, parent: 0000:00:14.0
>[  135.270763] call usb3+ returned 0 after 172 usecs
>[  135.272098] snd_hda_intel 0000:00:1b.0: irq 63 for MSI/MSI-X
>[  135.273307] call 0000:00:03.0+ returned 0 after 5993 usecs
>[  135.273635] call 0000:00:1d.0+ returned 0 after 5870 usecs
>[  135.273689] calling  usb1+ @ 3248, parent: 0000:00:1d.0
>[  135.275208] call 0000:00:1f.3+ returned 0 after 7343 usecs
>[  135.277495] call 0000:00:1b.0+ returned 0 after 9745 usecs
>[  135.278145] call 0000:00:1f.2+ returned 0 after 10252 usecs
>[  135.278160] calling  ata1+ @ 3240, parent: 0000:00:1f.2
>[  135.278165] calling  ata2+ @ 28, parent: 0000:00:1f.2
>[  135.278179] calling  ata3+ @ 6, parent: 0000:00:1f.2
>[  135.278224] call ata3+ returned 0 after 42 usecs
>[  135.278237] calling  host2+ @ 3239, parent: ata3
>[  135.278240] call host2+ returned 0 after 2 usecs
>[  135.305315] call usb1+ returned 0 after 30867 usecs
>[  135.305345] calling  1-1+ @ 3272, parent: usb1
>[  135.322171] [drm:swsci], SWSCI request timed out
>[  135.322173] [drm:swsci], SWSCI request already in progress
>[  135.322175] [drm:swsci_setup], SWSCI GBDA callbacks 00000001, SBCB callbacks 00000001
>[  135.322176] [drm:intel_opregion_setup], ASLE supported
>[  135.322408] [drm:init_status_page], render ring hws offset: 0x00000000
>[  135.324352] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
>[  135.324440] [drm:init_status_page], bsd ring hws offset: 0x00022000
>[  135.324781] [drm:init_status_page], blitter ring hws offset: 0x00043000
>[  135.325180] [drm:init_status_page], video enhancement ring hws offset: 0x00064000
>[  135.325707] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: disabled
>[  135.325712] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
>[  135.325715] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
>[  135.325719] [drm:intel_modeset_readout_hw_state], [ENCODER:9:TMDS-9] hw state readout: disabled, pipe A
>[  135.325722] [drm:intel_modeset_readout_hw_state], [ENCODER:17:TMDS-17] hw state readout: disabled, pipe A
>[  135.325725] [drm:intel_modeset_readout_hw_state], [CONNECTOR:10:eDP-1] hw state readout: disabled
>[  135.325728] [drm:intel_modeset_readout_hw_state], [CONNECTOR:18:HDMI-A-1] hw state readout: disabled
>[  135.325732] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
>[  135.325733] [drm:intel_dump_pipe_config], cpu_transcoder: A
>[  135.325734] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  135.325737] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  135.325739] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  135.325740] [drm:intel_dump_pipe_config], requested mode:
>[  135.325743] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  135.325744] [drm:intel_dump_pipe_config], adjusted mode:
>[  135.325746] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  135.325748] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  135.325750] [drm:intel_dump_pipe_config], port clock: 0
>[  135.325751] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[  135.325753] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  135.325754] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  135.325756] [drm:intel_dump_pipe_config], ips: 0
>[  135.325757] [drm:intel_dump_pipe_config], double wide: 0
>[  135.325760] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
>[  135.325761] [drm:intel_dump_pipe_config], cpu_transcoder: B
>[  135.325762] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  135.325764] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  135.325766] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  135.325767] [drm:intel_dump_pipe_config], requested mode:
>[  135.325769] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  135.325770] [drm:intel_dump_pipe_config], adjusted mode:
>[  135.325773] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  135.325775] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  135.325776] [drm:intel_dump_pipe_config], port clock: 0
>[  135.325777] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[  135.325779] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  135.325780] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  135.325781] [drm:intel_dump_pipe_config], ips: 0
>[  135.325782] [drm:intel_dump_pipe_config], double wide: 0
>[  135.325785] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
>[  135.325786] [drm:intel_dump_pipe_config], cpu_transcoder: C
>[  135.325788] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
>[  135.325790] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  135.325791] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  135.325792] [drm:intel_dump_pipe_config], requested mode:
>[  135.325795] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  135.325796] [drm:intel_dump_pipe_config], adjusted mode:
>[  135.325798] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
>[  135.325800] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
>[  135.325801] [drm:intel_dump_pipe_config], port clock: 0
>[  135.325802] [drm:intel_dump_pipe_config], pipe src size: 0x0
>[  135.325804] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  135.325806] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  135.325807] [drm:intel_dump_pipe_config], ips: 0
>[  135.325808] [drm:intel_dump_pipe_config], double wide: 0
>[  135.325834] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
>[  135.325847] [drm:connected_sink_compute_bpp], [CONNECTOR:10:eDP-1] checking for sink bpp constrains
>[  135.325848] [drm:connected_sink_compute_bpp], clamping display bpp (was 24) to EDID reported max of 18
>[  135.325852] [drm:intel_dp_compute_config], DP link computation with max lane count 1 max bw 0a pixel clock 75600KHz
>[  135.325854] [drm:intel_dp_compute_config], DP link bw 0a lane count 1 clock 270000 bpp 18
>[  135.325856] [drm:intel_dp_compute_config], DP link bw required 136080 available 216000
>[  135.325858] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 18, dithering: 1
>[  135.325860] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
>[  135.325861] [drm:intel_dump_pipe_config], cpu_transcoder: P
>[  135.325862] [drm:intel_dump_pipe_config], pipe bpp: 18, dithering: 1
>[  135.325864] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
>[  135.325866] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 2642411, gmch_n: 4194304, link_m: 146800, link_n: 524288, tu: 64
>[  135.325867] [drm:intel_dump_pipe_config], requested mode:
>[  135.325870] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
>[  135.325871] [drm:intel_dump_pipe_config], adjusted mode:
>[  135.325874] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
>[  135.325877] [drm:intel_dump_crtc_timings], crtc timings: 75600 1366 1404 1426 1592 768 771 777 790, type: 0x48 flags: 0xa
>[  135.325878] [drm:intel_dump_pipe_config], port clock: 270000
>[  135.325879] [drm:intel_dump_pipe_config], pipe src size: 1366x768
>[  135.325881] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
>[  135.325883] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
>[  135.325884] [drm:intel_dump_pipe_config], ips: 1
>[  135.325885] [drm:intel_dump_pipe_config], double wide: 0
>[  135.325957] [drm:ironlake_update_plane], Writing base 000A1000 00000000 0 0 5504
>[  135.325966] [drm:intel_crtc_mode_set], [ENCODER:9:TMDS-9] set [MODE:0:1366x768]
>[  135.325968] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
>[  135.325974] [drm:ironlake_edp_panel_on], Turn eDP power on
>[  135.325977] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
>[  135.325981] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
>[  135.325984] [drm:ironlake_wait_panel_status], Wait complete
>[  135.325988] [drm:ironlake_wait_panel_on], Wait for panel power on
>[  135.325993] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd0003
>[  135.385135] call PNP0C0A:00+ returned 0 after 114517 usecs
>[  135.385142] calling  PNP0C0D:00+ @ 3210, parent: device:00
>[  135.388293] call PNP0C0D:00+ returned 0 after 3072 usecs
>[  135.388299] calling  PNP0C0C:00+ @ 3210, parent: device:00
>[  135.388301] call PNP0C0C:00+ returned 0 after 0 usecs
>[  135.388313] calling  LNXTHERM:00+ @ 3210, parent: device:4a
>[  135.391454] call LNXTHERM:00+ returned 0 after 3062 usecs
>[  135.391472] calling  VPC2004:00+ @ 3210, parent: platform
>[  135.391475] call VPC2004:00+ returned 0 after 0 usecs
>[  135.391478] calling  ACPI0003:00+ @ 3210, parent: platform
>[  135.395958] call ACPI0003:00+ returned 0 after 4368 usecs
>[  135.395964] calling  LNXPWRBN:00+ @ 3210, parent: LNXSYSTM:00
>[  135.395966] call LNXPWRBN:00+ returned 0 after 0 usecs
>[  135.395977] calling  00:00+ @ 3210, parent: pnp0
>[  135.395979] call 00:00+ returned 0 after 0 usecs
>[  135.395982] calling  00:01+ @ 3210, parent: pnp0
>[  135.395984] call 00:01+ returned 0 after 0 usecs
>[  135.395987] calling  00:02+ @ 3210, parent: pnp0
>[  135.395989] call 00:02+ returned 0 after 0 usecs
>[  135.395992] calling  00:03+ @ 3210, parent: pnp0
>[  135.395997] call 00:03+ returned 0 after 3 usecs
>[  135.396000] calling  00:04+ @ 3210, parent: pnp0
>[  135.396007] call 00:04+ returned 0 after 4 usecs
>[  135.396010] calling  00:05+ @ 3210, parent: pnp0
>[  135.396014] call 00:05+ returned 0 after 2 usecs
>[  135.396017] calling  00:06+ @ 3210, parent: pnp0
>[  135.396025] dpm_run_callback(): pnp_bus_resume+0x0/0x95 returns -19
>[  135.396027] call 00:06+ returned -19 after 8 usecs
>[  135.396029] PM: Device 00:06 failed to resume: error -19
>[  135.396032] calling  00:07+ @ 3210, parent: pnp0
>[  135.396036] call 00:07+ returned 0 after 2 usecs
>[  135.396039] calling  00:08+ @ 3210, parent: pnp0
>[  135.396043] call 00:08+ returned 0 after 2 usecs
>[  135.396230] calling  pcspkr+ @ 3210, parent: platform
>[  135.396232] call pcspkr+ returned 0 after 0 usecs
>[  135.396236] calling  platform-framebuffer.0+ @ 3210, parent: platform
>[  135.396238] call platform-framebuffer.0+ returned 0 after 0 usecs
>[  135.396247] calling  alarmtimer+ @ 3210, parent: platform
>[  135.396250] call alarmtimer+ returned 0 after 0 usecs
>[  135.396306] calling  serial8250+ @ 3210, parent: platform
>[  135.396309] call serial8250+ returned 0 after 1 usecs
>[  135.407239] call 1-1+ returned 0 after 99459 usecs
>[  135.464262] call usb2+ returned 0 after 190995 usecs
>[  135.464292] calling  2-6+ @ 3295, parent: usb2
>[  135.464294] calling  2-4+ @ 3282, parent: usb2
>[  135.464303] calling  2-5+ @ 3290, parent: usb2
>[  135.464638] call 2-4+ returned 0 after 333 usecs
>[  135.534284] [drm:ironlake_wait_panel_status], Wait complete
>[  135.535495] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  135.535992] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
>[  135.536482] [drm:intel_dp_start_link_train], clock recovery OK
>[  135.537289] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
>[  135.537757] [drm:ironlake_edp_backlight_on], 
>[  135.537764] [drm:intel_panel_enable_backlight], pipe A
>[  135.537785] [drm:intel_panel_actually_set_backlight], set backlight PWM = 765
>[  135.537793] [drm:intel_edp_psr_match_conditions], PSR disable by flag
>[  135.571306] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
>[  135.585322] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  135.589324] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  135.589353] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 0, prepare: 0, disable: 0
>[  135.589370] [drm:intel_connector_check_state], [CONNECTOR:10:eDP-1]
>[  135.589375] [drm:check_encoder_state], [ENCODER:9:TMDS-9]
>[  135.589378] [drm:check_encoder_state], [ENCODER:17:TMDS-17]
>[  135.589380] [drm:check_crtc_state], [CRTC:3]
>[  135.589402] [drm:check_crtc_state], [CRTC:5]
>[  135.589408] [drm:check_crtc_state], [CRTC:7]
>[  135.589457] [drm:intel_resume_hotplug], running encoder hotplug functions
>[  135.589477] ata1.00: configured for UDMA/133
>[  135.589513] call ata1+ returned 0 after 303925 usecs
>[  135.589538] calling  host0+ @ 3247, parent: ata1
>[  135.589544] call host0+ returned 0 after 3 usecs
>[  135.589567] calling  target0:0:0+ @ 3266, parent: host0
>[  135.589572] call target0:0:0+ returned 0 after 2 usecs
>[  135.589591] calling  0:0:0:0+ @ 3267, parent: target0:0:0
>[  135.589598] sd 0:0:0:0: [sda] Starting disk
>[  135.589980] call 0:0:0:0+ returned 0 after 376 usecs
>[  135.590266] [drm:intel_dp_get_dpcd], DPCD: 11 0a 81 41 00 00 01 80 02 00 00 00 0f 07 00
>[  135.591019] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
>[  135.591227] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  135.591233] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  135.591237] [drm:drm_helper_hpd_irq_event], [CONNECTOR:18:HDMI-A-1] status updated from unknown to disconnected
>[  135.591514] [drm:drm_fb_helper_hotplug_event], 
>[  135.591518] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1]
>[  135.591530] [drm:intel_dp_detect], [CONNECTOR:10:eDP-1]
>[  135.591535] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
>[  135.591546] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
>[  135.591763] [drm:intel_dp_probe_oui], Sink OUI: 001cf8
>[  135.591958] [drm:intel_dp_probe_oui], Branch OUI: 000000
>[  135.592061] [drm:drm_edid_to_eld], ELD: no CEA Extension found
>[  135.592070] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:10:eDP-1] probed modes :
>[  135.592075] [drm:drm_mode_debug_printmodeline], Modeline 11:"1366x768" 60 75600 1366 1404 1426 1592 768 771 777 790 0x48 0xa
>[  135.592078] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1]
>[  135.592080] [drm:intel_hdmi_detect], [CONNECTOR:18:HDMI-A-1]
>[  135.592270] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
>[  135.592274] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus dpc
>[  135.592277] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:18:HDMI-A-1] disconnected
>[  135.592282] [drm:drm_setup_crtcs], 
>[  135.592327] [drm:drm_enable_connectors], connector 10 enabled? yes
>[  135.592329] [drm:drm_enable_connectors], connector 18 enabled? no
>[  135.592332] [drm:drm_target_preferred], looking for cmdline mode on connector 10
>[  135.592334] [drm:drm_target_preferred], looking for preferred mode on connector 10
>[  135.592336] [drm:drm_target_preferred], found mode 1366x768
>[  135.592339] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
>[  135.592360] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3
>[  135.592406] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[  135.592453] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[  135.592456] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[  135.592468] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
>[  135.592514] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
>[  135.592518] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[  135.592528] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
>[  135.592574] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
>[  135.592577] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[  135.600539] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
>[  135.600578] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
>[  135.600580] [drm:intel_modeset_stage_output_state], [CONNECTOR:10:eDP-1] to [CRTC:3]
>[  135.601293] call 0000:00:02.0+ returned 0 after 326163 usecs
>[  135.618048] usb 2-6: reset full-speed USB device number 4 using xhci_hcd
>[  135.629201] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008c6c63c0
>[  135.629204] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008c6c6400
>[  135.629206] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88008c6c6440
>[  135.629208] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880156ffe580
>[  135.629210] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880156ffe5c0
>[  135.630007] call 2-6+ returned 0 after 161759 usecs
>[  135.781634] usb 2-5: reset high-speed USB device number 3 using xhci_hcd
>[  135.820534] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880000082040
>[  135.820537] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800000820c0
>[  135.822653] call 2-5+ returned 0 after 349801 usecs
>[  136.790842] [drm:intel_print_rc6_info], Haswell: only RC6 available
>[  136.790844] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
>[  137.267055] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>[  137.374990] ata2.00: configured for UDMA/133
>[  137.375050] call ata2+ returned 0 after 2046879 usecs
>[  137.375082] calling  host1+ @ 1160, parent: ata2
>[  137.375086] call host1+ returned 0 after 2 usecs
>[  137.375107] calling  target1:0:0+ @ 3269, parent: host1
>[  137.375113] call target1:0:0+ returned 0 after 2 usecs
>[  137.375130] calling  1:0:0:0+ @ 3270, parent: target1:0:0
>[  137.375136] sd 1:0:0:0: [sdb] Starting disk
>[  137.375142] calling  i8042+ @ 3210, parent: platform
>[  137.385563] call i8042+ returned 0 after 10168 usecs
>[  137.385581] calling  serio0+ @ 3210, parent: i8042
>[  137.385836] call serio0+ returned 0 after 247 usecs
>[  137.385966] calling  serio1+ @ 3210, parent: i8042
>[  137.385977] call serio1+ returned 0 after 8 usecs
>[  137.385989] calling  rtc0+ @ 3210, parent: 00:04
>[  137.385991] call rtc0+ returned 0 after 0 usecs
>[  137.386023] calling  input0+ @ 3210, parent: serio0
>[  137.386359] call input0+ returned 0 after 326 usecs
>[  137.399244] call 1:0:0:0+ returned 0 after 23534 usecs
>[  137.399311] calling  input3+ @ 3210, parent: PNP0C0D:00
>[  137.399316] call input3+ returned 0 after 3 usecs
>[  137.399322] calling  input4+ @ 3210, parent: PNP0C0C:00
>[  137.399607] call input4+ returned 0 after 276 usecs
>[  137.399632] calling  input5+ @ 3210, parent: LNXPWRBN:00
>[  137.399647] call input5+ returned 0 after 12 usecs
>[  137.399668] calling  controlD64+ @ 3210, parent: 0000:00:02.0
>[  137.399671] call controlD64+ returned 0 after 0 usecs
>[  137.399674] calling  card0+ @ 3210, parent: 0000:00:02.0
>[  137.399677] call card0+ returned 0 after 0 usecs
>[  137.399681] calling  i2c-0+ @ 3210, parent: 0000:00:02.0
>[  137.399683] call i2c-0+ returned 0 after 0 usecs
>[  137.399689] calling  i2c-1+ @ 3210, parent: 0000:00:02.0
>[  137.399691] call i2c-1+ returned 0 after 0 usecs
>[  137.399696] calling  i2c-2+ @ 3210, parent: 0000:00:02.0
>[  137.399698] call i2c-2+ returned 0 after 0 usecs
>[  137.399704] calling  i2c-3+ @ 3210, parent: 0000:00:02.0
>[  137.399706] call i2c-3+ returned 0 after 0 usecs
>[  137.399712] calling  i2c-4+ @ 3210, parent: 0000:00:02.0
>[  137.399714] call i2c-4+ returned 0 after 0 usecs
>[  137.399719] calling  i2c-5+ @ 3210, parent: 0000:00:02.0
>[  137.399721] call i2c-5+ returned 0 after 0 usecs
>[  137.399730] calling  card0-eDP-1+ @ 3210, parent: card0
>[  137.399732] call card0-eDP-1+ returned 0 after 0 usecs
>[  137.399735] calling  i2c-6+ @ 3210, parent: card0-eDP-1
>[  137.399737] call i2c-6+ returned 0 after 0 usecs
>[  137.399743] calling  intel_backlight+ @ 3210, parent: card0-eDP-1
>[  137.399746] call intel_backlight+ returned 0 after 1 usecs
>[  137.399750] calling  card0-HDMI-A-1+ @ 3210, parent: card0
>[  137.399752] call card0-HDMI-A-1+ returned 0 after 0 usecs
>[  137.399760] calling  input2+ @ 3210, parent: serio1
>[  137.399763] call input2+ returned 0 after 1 usecs
>[  137.399772] calling  acpi_video0+ @ 3210, parent: 0000:00:02.0
>[  137.399775] call acpi_video0+ returned 0 after 1 usecs
>[  137.399781] calling  input6+ @ 3210, parent: LNXVIDEO:00
>[  137.399794] call input6+ returned 0 after 11 usecs
>[  137.399812] calling  input7+ @ 3210, parent: pcspkr
>[  137.399840] call input7+ returned 0 after 25 usecs
>[  137.399849] calling  iTCO_wdt+ @ 3210, parent: 0000:00:1f.0
>[  137.399851] call iTCO_wdt+ returned 0 after 0 usecs
>[  137.399865] calling  input8+ @ 3210, parent: 2-5:1.0
>[  137.399876] call input8+ returned 0 after 9 usecs
>[  137.399939] PM: resume of devices complete after 2132.568 msecs
>[  137.402138] PM: Finishing wakeup.
>[  137.402140] Restarting tasks ... done.
>[  137.402980] video LNXVIDEO:00: Restoring backlight state
>[  137.406728] usb 2-4: USB disconnect, device number 2
>[  137.408398] asix 2-4:1.0 enp0s20u4: unregister 'asix' usb-0000:00:14.0-4, ASIX AX88772B USB 2.0 Ethernet
>[  137.690208] usb 2-4: new high-speed USB device number 5 using xhci_hcd
>[  137.717007] usb 2-4: New USB device found, idVendor=0b95, idProduct=772b
>[  137.717012] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>[  137.717016] usb 2-4: Product: AX88772B
>[  137.717018] usb 2-4: Manufacturer: ASIX Elec. Corp.
>[  137.717021] usb 2-4: SerialNumber: 000159
>[  138.028551] asix 2-4:1.0 eth0: register 'asix' at usb-0000:00:14.0-4, ASIX AX88772B USB 2.0 Ethernet, 00:24:8c:02:92:49
>[  138.159995] systemd-udevd[3306]: renamed network interface eth0 to enp0s20u4
>[  138.595547] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
>[  138.595562] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
>[  138.942025] IPv6: ADDRCONF(NETDEV_UP): enp0s20u4: link is not ready
>[  140.774298] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s20u4: link becomes ready
>[  140.775279] asix 2-4:1.0 enp0s20u4: link up, 100Mbps, full-duplex, lpa 0xC5E1

Actions: View

Attachments on bug 72211: 90071 | 90296 | 90856 | 90963 | 92908 | 94050 | 94865 | 95008 | 95206

Use of freedesktop.org services, including Bugzilla, is subject to our Code of Conduct. How we collect and use information is described in our Privacy Policy.